From a7773d671b241a66d4554d5d8b68f648e0664d44 Mon Sep 17 00:00:00 2001 From: Kornel Benko Date: Fri, 13 May 2011 13:24:22 +0000 Subject: [PATCH] * sk.po git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38741 a592a061-630c-0410-9148-cb99ea01b6c8 --- po/sk.po | 264 +++++++++++++++++++++++++++++-------------------------- 1 file changed, 138 insertions(+), 126 deletions(-) diff --git a/po/sk.po b/po/sk.po index fee8fa24e0..e37efedb9c 100644 --- a/po/sk.po +++ b/po/sk.po @@ -8,8 +8,8 @@ msgid "" msgstr "" "Project-Id-Version: LyX-1.6\n" "Report-Msgid-Bugs-To: lyx-devel@lists.lyx.org\n" -"POT-Creation-Date: 2011-05-12 15:31+0200\n" -"PO-Revision-Date: 2011-05-12 16:01+0200\n" +"POT-Creation-Date: 2011-05-13 15:09+0200\n" +"PO-Revision-Date: 2011-05-13 15:23+0200\n" "Last-Translator: Kornel Benko \n" "Language-Team: Slovak \n" "Language: sk\n" @@ -3185,7 +3185,7 @@ msgstr "Úprava" msgid "Cursor &follows scrollbar" msgstr "Kurzor &sleduje posuvník" -#: src/frontends/qt4/ui/PrefEditUi.ui:46 src/LyXRC.cpp:3143 +#: src/frontends/qt4/ui/PrefEditUi.ui:46 src/LyXRC.cpp:3138 msgid "" "Configure the width of the text cursor. Automatic zoom-controlled cursor " "width used when set to 0." @@ -3486,7 +3486,7 @@ msgstr "Označiť &cudzie jazyky" msgid "Right-to-left language support" msgstr "Podpora písania sprava-doľava" -#: src/frontends/qt4/ui/PrefLanguageUi.ui:215 src/LyXRC.cpp:3424 +#: src/frontends/qt4/ui/PrefLanguageUi.ui:215 src/LyXRC.cpp:3419 msgid "" "Select to enable support of right-to-left languages (e.g. Hebrew, Arabic)." msgstr "" @@ -3613,25 +3613,28 @@ msgstr "Príkaz Chec&kTeX:" msgid "CheckTeX start options and flags" msgstr "Začiatočné voľby a indikátory pre CheckTeX" -#: src/frontends/qt4/ui/PrefLatexUi.ui:329 +#: src/frontends/qt4/ui/PrefLatexUi.ui:326 msgid "" -"Select if LyX should output Windows-style paths rather than Posix-style " -"paths to LaTeX files. Useful if you're using the native Windows MikTeX " -"rather than the Cygwin teTeX." +"Select whether LyX should output Windows or Cygwin style\n" +"paths to LaTeX files. Don't change the default unless the\n" +"TeX engine was not correctly detected at configure time.\n" +"Warning: Your changes here will not be saved." msgstr "" -"Vyberte v prípade, že má LyX do LaTeX-u produkovať cesty k súborom radšej vo " -"Windows-štýle než v Posix-štýle. Užitočné pri používaní Windowsového MikTeX-" -"u miesto teTeX-u pod Cygwin." +"Vyberte, či by LyX mal písať cesty do LaTeX-súborov v štýle Windows alebo " +"Cygwin.\n" +"Nemeňte štandardné nastavenie keď sa už našiel správny TeX počas " +"konfigurácie.\n" +"Varovanie: Tieto vaše zmeny nebudú uložené." -#: src/frontends/qt4/ui/PrefLatexUi.ui:335 +#: src/frontends/qt4/ui/PrefLatexUi.ui:332 msgid "&Use Windows-style paths in LaTeX files" msgstr "Používať Windows-štýl na zápis ciest v súboroch LaTeX-u" -#: src/frontends/qt4/ui/PrefLatexUi.ui:342 +#: src/frontends/qt4/ui/PrefLatexUi.ui:339 msgid "Set class options to default on class change" msgstr "Zvoliť štandardné voľby pri zmene triedy" -#: src/frontends/qt4/ui/PrefLatexUi.ui:345 +#: src/frontends/qt4/ui/PrefLatexUi.ui:342 msgid "R&eset class options when document class changes" msgstr "Obnoviť triedne voľby pri zmene triedy dokumentu" @@ -3639,7 +3642,7 @@ msgstr "Obnoviť triedne voľby pri zmene triedy dokumentu" msgid "Output &line length:" msgstr "Dĺžka výstupného riadku:" -#: src/frontends/qt4/ui/PrefOutputUi.ui:37 src/LyXRC.cpp:3090 +#: src/frontends/qt4/ui/PrefOutputUi.ui:37 src/LyXRC.cpp:3085 msgid "" "The maximum line length of exported plain text/LaTeX/SGML files. If set to " "0, paragraphs are output in a single line; if the line length is > 0, " @@ -3694,7 +3697,7 @@ msgstr "PDF príkaz:" msgid "&PATH prefix:" msgstr "P&refix cesty:" -#: src/frontends/qt4/ui/PrefPathsUi.ui:51 src/LyXRC.cpp:3334 +#: src/frontends/qt4/ui/PrefPathsUi.ui:51 src/LyXRC.cpp:3329 msgid "" "Specify those directories which should be prepended to the PATH environment " "variable.\n" @@ -3708,7 +3711,7 @@ msgstr "" msgid "TEX&INPUTS prefix:" msgstr "Prefix pre TEXINPUTS:" -#: src/frontends/qt4/ui/PrefPathsUi.ui:68 src/LyXRC.cpp:3493 +#: src/frontends/qt4/ui/PrefPathsUi.ui:68 src/LyXRC.cpp:3488 msgid "" "Specify those directories which should be prepended to the TEXINPUTS " "environment variable.\n" @@ -17582,12 +17585,12 @@ msgstr "regulárny výraz (rám)" msgid "ignore" msgstr "ignorovať" -#: src/Converter.cpp:326 src/Converter.cpp:487 src/Converter.cpp:510 -#: src/Converter.cpp:553 +#: src/Converter.cpp:327 src/Converter.cpp:489 src/Converter.cpp:512 +#: src/Converter.cpp:555 msgid "Cannot convert file" msgstr "Nie je možné konvertovať súbor" -#: src/Converter.cpp:327 +#: src/Converter.cpp:328 #, c-format msgid "" "No information for converting %1$s format files to %2$s.\n" @@ -17596,19 +17599,19 @@ msgstr "" "Žiadne informácie pre konverziu %1$s formátnych súborov do %2$s.\n" "Definujte konvertor v preferenciách." -#: src/Converter.cpp:439 src/Format.cpp:320 src/Format.cpp:387 +#: src/Converter.cpp:440 src/Format.cpp:320 src/Format.cpp:387 msgid "Executing command: " msgstr "Vykonávam príkaz: " -#: src/Converter.cpp:482 +#: src/Converter.cpp:484 msgid "Build errors" msgstr "Chyby pri vytváraní" -#: src/Converter.cpp:483 +#: src/Converter.cpp:485 msgid "There were errors during the build process." msgstr "Počas spracovania sa vyskytli chyby." -#: src/Converter.cpp:488 +#: src/Converter.cpp:490 #, c-format msgid "" "An error occurred while running:\n" @@ -17617,26 +17620,26 @@ msgstr "" "Chyba pri spracovaní:\n" "%1$s" -#: src/Converter.cpp:511 +#: src/Converter.cpp:513 #, c-format msgid "Could not move a temporary directory from %1$s to %2$s." msgstr "Pomocný adresár %1$s sa nedal presunúť na %2$s." -#: src/Converter.cpp:555 +#: src/Converter.cpp:557 #, c-format msgid "Could not copy a temporary file from %1$s to %2$s." msgstr "Nedá sa skopírovať pomocný súbor z %1$s do %2$s." -#: src/Converter.cpp:556 +#: src/Converter.cpp:558 #, c-format msgid "Could not move a temporary file from %1$s to %2$s." msgstr "Nedá sa presunúť pomocný súbor z %1$s do %2$s." -#: src/Converter.cpp:612 +#: src/Converter.cpp:614 msgid "Running LaTeX..." msgstr "Spúšťam LaTeX..." -#: src/Converter.cpp:631 +#: src/Converter.cpp:633 #, c-format msgid "" "LaTeX did not run successfully. Additionally, LyX could not locate the LaTeX " @@ -17645,15 +17648,15 @@ msgstr "" "LaTeX neprebehol úspešne. Čo viac, LyX nenašiel výstup pre protokol LaTeXu " "%1$s." -#: src/Converter.cpp:634 +#: src/Converter.cpp:636 msgid "LaTeX failed" msgstr "LaTeX zlyhal" -#: src/Converter.cpp:636 +#: src/Converter.cpp:638 msgid "Output is empty" msgstr "Výstup je prázdny" -#: src/Converter.cpp:637 +#: src/Converter.cpp:639 msgid "An empty output file was generated." msgstr "Bol generovaný prázdny výstupný súbor." @@ -18193,7 +18196,7 @@ msgstr "Chýba typ súboru [napr. latex, ps...] po prepínači --import" msgid "Missing filename for --import" msgstr "Chýba názov súboru pre --import" -#: src/LyXRC.cpp:3082 +#: src/LyXRC.cpp:3077 msgid "" "Consider run-together words, such as \"diskdrive\" for \"disk drive\", as " "legal words?" @@ -18201,14 +18204,14 @@ msgstr "" "Považovať spojené slová ako sú \"kedytedy\" namiesto \"kedy tedy\" ako " "správne slová?" -#: src/LyXRC.cpp:3086 +#: src/LyXRC.cpp:3081 msgid "" "Specify an alternate language. The default is to use the language of the " "document." msgstr "" "Nastavenie alternatívneho jazyka. Implicitne sa použije jazyk dokumentu." -#: src/LyXRC.cpp:3094 +#: src/LyXRC.cpp:3089 msgid "" "De-select if you don't want the current selection to be replaced " "automatically by what you type." @@ -18216,7 +18219,7 @@ msgstr "" "Zrušte výber ak nechcete, aby aktuálna voľba bola automaticky nahradená s " "tým, čo píšete." -#: src/LyXRC.cpp:3098 +#: src/LyXRC.cpp:3093 msgid "" "De-select if you don't want the class options to be reset to defaults after " "class change." @@ -18224,14 +18227,14 @@ msgstr "" "Zrušte výber ak nechcete, aby voľby triedy boli nahradené štandardom po " "zmene triedy." -#: src/LyXRC.cpp:3102 +#: src/LyXRC.cpp:3097 msgid "" "The time interval between auto-saves (in seconds). 0 means no auto-save." msgstr "" "Časový interval pri automatickom ukladaní (v sekundách). 0 znamená bez " "automatického ukladania." -#: src/LyXRC.cpp:3109 +#: src/LyXRC.cpp:3104 msgid "" "The path for storing backup files. If it is an empty string, LyX will store " "the backup file in the same directory as the original file." @@ -18239,7 +18242,7 @@ msgstr "" "Cesta pre ukladanie záložných súborov. Ak je to prázdny reťazec, LyX bude " "ukladať záložné súbory do adresáru originálneho súbora." -#: src/LyXRC.cpp:3113 +#: src/LyXRC.cpp:3108 msgid "" "Define the options of bibtex (cf. man bibtex) or select an alternative " "compiler (e.g. mlbibtex or bibulus)." @@ -18247,11 +18250,11 @@ msgstr "" "Zvoľte voľby pre bibtex (porovnaj man bibtex) alebo zvoľte alternatívny " "kompilátor (napr. mlbibtex alebo bibulus)." -#: src/LyXRC.cpp:3117 +#: src/LyXRC.cpp:3112 msgid "Define the options of the bibtex program for PLaTeX (Japanese LaTeX)." msgstr "Definuje voľby programu bibtex pre PLaTeX (Japonský LaTeX)." -#: src/LyXRC.cpp:3121 +#: src/LyXRC.cpp:3116 msgid "" "Keybindings file. Can either specify an absolute path, or LyX will look in " "its global and local bind/ directories." @@ -18259,11 +18262,11 @@ msgstr "" "Súbor s klávesnými skratkami. Môžete použiť absolútnu cestu, ináč bude LyX " "hľadať v globálnych a lokálnych bind/ adresároch." -#: src/LyXRC.cpp:3125 +#: src/LyXRC.cpp:3120 msgid "Select to check whether the lastfiles still exist." msgstr "Vyberte to na kontrolu existencie posledných súborov." -#: src/LyXRC.cpp:3129 +#: src/LyXRC.cpp:3124 msgid "" "Define how to run chktex. E.g. \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -" "n38\" Refer to the ChkTeX documentation." @@ -18271,7 +18274,7 @@ msgstr "" "Definujte ako spustiť chktex. Napr. \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -" "n30 -n38\" Pozrite si dokumentáciu k ChkTeX." -#: src/LyXRC.cpp:3139 +#: src/LyXRC.cpp:3134 msgid "" "LyX normally doesn't update the cursor position if you move the scrollbar. " "Set to true if you'd prefer to always have the cursor on screen." @@ -18279,7 +18282,7 @@ msgstr "" "LyX normálne neaktualizuje pozíciu kurzora, ak ste pohli posuvníkom. " "Nastavte túto voľbu, ak preferujete mať pozíciu kurzora na obrazovke." -#: src/LyXRC.cpp:3147 +#: src/LyXRC.cpp:3142 msgid "" "LyX normally doesn't allow the user to scroll further than the bottom of the " "document. Set to true if you prefer to scroll the bottom of the document to " @@ -18288,15 +18291,15 @@ msgstr "" "LyX normálne nepovoľuje skrolovať pod koniec dokumentu. Nastavte túto voľbu, " "ak preferujete skrolovať koniec až na vrchol obrazovky." -#: src/LyXRC.cpp:3151 +#: src/LyXRC.cpp:3146 msgid "Make Apple key act as Meta and Control key as Ctrl." msgstr "Prehoď Apple klávesu na Meta a Kontrol klávesu na Ctrl." -#: src/LyXRC.cpp:3155 +#: src/LyXRC.cpp:3150 msgid "Use the Mac OS X conventions for the word-level cursor movement" msgstr "Použiť dohody Mac OS X pre pohyb kurzoru po slovách" -#: src/LyXRC.cpp:3159 +#: src/LyXRC.cpp:3154 msgid "" "Show a small box around a Math Macro with the macro name when the cursor is " "inside." @@ -18304,7 +18307,7 @@ msgstr "" "Zobraziť malý rámok okolo mat. makra spolu s menom makra keď je kurzor " "vnútri." -#: src/LyXRC.cpp:3164 +#: src/LyXRC.cpp:3159 #, no-c-format msgid "" "This accepts the normal strftime formats; see man strftime for full details. " @@ -18313,7 +18316,7 @@ msgstr "" "Tu je akceptovaný bežný strftime formát; detaily sú v man strftime. Napr." "\"%A, %e. %B %Y\"." -#: src/LyXRC.cpp:3168 +#: src/LyXRC.cpp:3163 msgid "" "Command definition file. Can either specify an absolute path, or LyX will " "look in its global and local commands/ directories." @@ -18321,19 +18324,19 @@ msgstr "" "Súbor definíc príkazov. Alebo zadáte absolútnu cestu, alebo bude LyX hľadať " "v jeho lokálnych a globálnych commands/ adresároch." -#: src/LyXRC.cpp:3172 +#: src/LyXRC.cpp:3167 msgid "The default format used with LFUN_BUFFER_[VIEW|UPDATE]." msgstr "Štandardný formát použitý s LFUN_BUFFER_[VIEW|UPDATE]." -#: src/LyXRC.cpp:3176 +#: src/LyXRC.cpp:3171 msgid "New documents will be assigned this language." msgstr "Novým dokumentom bude priradený tento jazyk." -#: src/LyXRC.cpp:3180 +#: src/LyXRC.cpp:3175 msgid "Specify the default paper size." msgstr "Určite štandardné veľkosti stránky" -#: src/LyXRC.cpp:3184 +#: src/LyXRC.cpp:3179 msgid "" "Iconify the dialogs when the main window is iconified. (Affects only dialogs " "shown after the change has been made.)" @@ -18341,11 +18344,11 @@ msgstr "" "Minimalizuj dialógové okná spoločne s hlavným oknom LyX-u. (Vzťahuje sa len " "na dialógy zobrazené po tejto zmene.)" -#: src/LyXRC.cpp:3188 +#: src/LyXRC.cpp:3183 msgid "Select how LyX will display any graphics." msgstr "Vyberte ako budú v LyXe zobrazené obrázky." -#: src/LyXRC.cpp:3192 +#: src/LyXRC.cpp:3187 msgid "" "The default path for your documents. An empty value selects the directory " "LyX was started from." @@ -18353,11 +18356,11 @@ msgstr "" "Štandardná cesta k vašim dokumentom. Prázdna hodnota spôsobí, že bude " "nastavený adresár, z ktorého bol LyX spustený." -#: src/LyXRC.cpp:3196 +#: src/LyXRC.cpp:3191 msgid "Specify additional chars that can be part of a word." msgstr "Špecifikujte dodatočné znaky, ktoré smú byť časťou slova." -#: src/LyXRC.cpp:3200 +#: src/LyXRC.cpp:3195 msgid "" "The path that LyX will set when offering to choose an example. An empty " "value selects the directory LyX was started from." @@ -18365,7 +18368,7 @@ msgstr "" "Cesta, ktorú vám LyX pri voľbe príkladov ponúkne. Prázdna hodnota spôsobí, " "že bude nastavený adresár, z ktorého bol LyX spustený." -#: src/LyXRC.cpp:3204 +#: src/LyXRC.cpp:3199 msgid "" "The font encoding used for the LaTeX2e fontenc package. T1 is highly " "recommended for non-English languages." @@ -18373,12 +18376,12 @@ msgstr "" "Kódovanie písma použité pre LaTeX2e balíček fontenc. T1 je vrelo odporučené " "pre neanglické jazyky." -#: src/LyXRC.cpp:3208 +#: src/LyXRC.cpp:3203 msgid "Disable any kerning and ligatures for text drawing on screen." msgstr "" "Zablokovať zmenšenia medzier medzi susednými znakmi pre text na obrazovke." -#: src/LyXRC.cpp:3215 +#: src/LyXRC.cpp:3210 msgid "" "Define the options of makeindex (cf. man makeindex) or select an alternative " "compiler. E.g., using xindy/make-rules, the command string would be " @@ -18388,11 +18391,11 @@ msgstr "" "alternatívny kompilátor - napr. použitím xindy/make-rules by príkaz vyzeral " "\"makeindex.sh -m $$lang\"." -#: src/LyXRC.cpp:3219 +#: src/LyXRC.cpp:3214 msgid "Define the options of the index program for PLaTeX (Japanese LaTeX)." msgstr "Definuje voľby indexovania pre PLaTeX (Japonský LaTeX)." -#: src/LyXRC.cpp:3223 +#: src/LyXRC.cpp:3218 msgid "" "Define the options of makeindex (cf. man makeindex) to be used for " "nomenclatures. This might differ from the index processing options." @@ -18400,7 +18403,7 @@ msgstr "" "Definujte voľby programu makeindex používané pre nomenklatúry. Môžu sa líšiť " "od volieb pre generáciu registru." -#: src/LyXRC.cpp:3232 +#: src/LyXRC.cpp:3227 msgid "" "Use this to set the correct mapping file for your keyboard. You'll need this " "if you for instance want to type German documents on an American keyboard." @@ -18409,18 +18412,18 @@ msgstr "" "potrebovať napríklad vtedy, keď budete chcieť písať dokument v Slovenčine na " "americkej klávesnici." -#: src/LyXRC.cpp:3236 +#: src/LyXRC.cpp:3231 msgid "" "Select if a language switching command is needed at the beginning of the " "document." msgstr "Vyberte, ak je príkaz pre zmenu jazyku potrebný na začiatku dokumentu." -#: src/LyXRC.cpp:3240 +#: src/LyXRC.cpp:3235 msgid "" "Select if a language switching command is needed at the end of the document." msgstr "Vyberte, ak je príkaz pre zmenu jazyku potrebný na konci dokumentu." -#: src/LyXRC.cpp:3244 +#: src/LyXRC.cpp:3239 msgid "" "The LaTeX command for changing from the language of the document to another " "language. E.g. \\selectlanguage{$$lang} where $$lang is substituted by the " @@ -18429,22 +18432,22 @@ msgstr "" "LaTeX príkaz pre zmenu z jazyka dokumentu do iného jazyka. Napr. " "\\selectlanguage{$$lang}, kde $$lang je nahradené názvom druhého jazyka." -#: src/LyXRC.cpp:3248 +#: src/LyXRC.cpp:3243 msgid "The LaTeX command for changing back to the language of the document." msgstr "LaTeXovský príkaz pre návrat k pôvodnému jazyku dokumentu." -#: src/LyXRC.cpp:3252 +#: src/LyXRC.cpp:3247 msgid "The LaTeX command for local changing of the language." msgstr "LaTeXovský príkaz pre lokálnu zmenu jazyka." -#: src/LyXRC.cpp:3256 +#: src/LyXRC.cpp:3251 msgid "" "De-select if you don't want the language(s) used as an argument to " "\\documentclass." msgstr "" "Zrušte výber ak nechcete použiť jazyk(y) ako argument k \\documentclass." -#: src/LyXRC.cpp:3260 +#: src/LyXRC.cpp:3255 msgid "" "The LaTeX command for loading the language package. E.g. \"\\usepackage" "{babel}\", \"\\usepackage{omega}\"." @@ -18452,7 +18455,7 @@ msgstr "" "Príkaz LaTeXu pre načítanie jazykového balíka. Napr. \"\\usepackage" "{babel}\", \"\\usepackage{omega}\"." -#: src/LyXRC.cpp:3264 +#: src/LyXRC.cpp:3259 msgid "" "De-select if you don't want babel to be used when the language of the " "document is the default language." @@ -18460,99 +18463,99 @@ msgstr "" "Zrušte výber ak nechcete použiť babel, ak jazyk dokumentu je prednastavený " "jazyk." -#: src/LyXRC.cpp:3268 +#: src/LyXRC.cpp:3263 msgid "De-select if you do not want LyX to scroll to saved position." msgstr "Zrušte výber ak nechcete, aby LyX roloval k uloženej pozícii." -#: src/LyXRC.cpp:3272 +#: src/LyXRC.cpp:3267 msgid "De-select to prevent loading files opened from the last LyX session." msgstr "Zrušte výber keď nechcete nahrávať súbory otvorené v poslednom sedení." -#: src/LyXRC.cpp:3276 +#: src/LyXRC.cpp:3271 msgid "De-select if you don't want LyX to create backup files." msgstr "Zrušte výber ak nechcete, aby LyX vytváral záložné súbory." -#: src/LyXRC.cpp:3280 +#: src/LyXRC.cpp:3275 msgid "" "Select to control the highlighting of words with a language foreign to that " "of the document." msgstr "" "Vyberte pre kontrolu zvýrazňovania slov ktoré nie sú v jazyku dokumentu." -#: src/LyXRC.cpp:3284 +#: src/LyXRC.cpp:3279 msgid "The scrolling speed of the mouse wheel." msgstr "Rýchlosť rolovania kolieskom myši." -#: src/LyXRC.cpp:3289 +#: src/LyXRC.cpp:3284 msgid "The completion popup delay." msgstr "Zdržanie pre vyťahovacie menu na doplňovanie." -#: src/LyXRC.cpp:3293 +#: src/LyXRC.cpp:3288 msgid "Select to display the completion popup in math mode." msgstr "" "Vybrať, aby sa vnútri mat. vzorkov vyťahovacie menu doplňovania zobrazilo." -#: src/LyXRC.cpp:3297 +#: src/LyXRC.cpp:3292 msgid "Select to display the completion popup in text mode." msgstr "Vybrať, aby sa textovom režime vyťahovacie menu doplňovania zobrazilo." -#: src/LyXRC.cpp:3301 +#: src/LyXRC.cpp:3296 msgid "" "Show the completion popup without delay after non-unique completion attempt." msgstr "Bez zdržania zobraziť vyťahovacie menu pri viacznačnosti." -#: src/LyXRC.cpp:3305 +#: src/LyXRC.cpp:3300 msgid "" "Show a small triangle on the cursor to indicate that a completion is " "available." msgstr "Zobraziť malý trojuholník za kurzorom kým je doplňovanie možné." -#: src/LyXRC.cpp:3309 +#: src/LyXRC.cpp:3304 msgid "The inline completion delay." msgstr "Zdržanie pre riadkové doplňovanie." -#: src/LyXRC.cpp:3313 +#: src/LyXRC.cpp:3308 msgid "Select to display the inline completion in math mode." msgstr "Vyberte pre zobrazenie riadkového doplňovania v matematickom móde." -#: src/LyXRC.cpp:3317 +#: src/LyXRC.cpp:3312 msgid "Select to display the inline completion in text mode." msgstr "Vyberte pre zobrazenie riadkového doplňovania v textovom móde." -#: src/LyXRC.cpp:3321 +#: src/LyXRC.cpp:3316 msgid "Use \"...\" to shorten long completions." msgstr "Použiť \"...\" pre skrátenie dlhých doplnení." -#: src/LyXRC.cpp:3325 +#: src/LyXRC.cpp:3320 msgid "Allow TeXMacs shorthand, like => converting to \\Rightarrow." msgstr "Umožni TeXMacs skratky, ako napr. => konverzia na \\Rightarrow." -#: src/LyXRC.cpp:3329 +#: src/LyXRC.cpp:3324 #, c-format msgid "Maximal number of lastfiles. Up to %1$d can appear in the file menu." msgstr "Maximálny počet posledných súborov. Až %1$d ich môže byť v ponuke." -#: src/LyXRC.cpp:3340 +#: src/LyXRC.cpp:3335 msgid "Shows a typeset preview of things such as math" msgstr "Zobrazuje náhľad na sadu vecí typu matematiky a pod." -#: src/LyXRC.cpp:3344 +#: src/LyXRC.cpp:3339 msgid "Previewed equations will have \"(#)\" labels rather than numbered ones" msgstr "Rovnice v náhľade budú označené pomocou \"(#)\" a nebudú očíslované." -#: src/LyXRC.cpp:3348 +#: src/LyXRC.cpp:3343 msgid "Scale the preview size to suit." msgstr "Nastavte mierku pre vhodný náhľad." -#: src/LyXRC.cpp:3352 +#: src/LyXRC.cpp:3347 msgid "The option for specifying whether the copies should be collated." msgstr "Voľba špecifikuje, či sa kópie majú usporiadať." -#: src/LyXRC.cpp:3356 +#: src/LyXRC.cpp:3351 msgid "The option for specifying the number of copies to print." msgstr "Voľba špecifikuje počet kópií pre tlač." -#: src/LyXRC.cpp:3360 +#: src/LyXRC.cpp:3355 msgid "" "The default printer to print on. If none is specified, LyX will use the " "environment variable PRINTER." @@ -18560,46 +18563,46 @@ msgstr "" "Štandardná tlačiareň pre tlač. Ak nič nie je nastavené, tak LyX použije " "premennú prostredia PRINTER." -#: src/LyXRC.cpp:3364 +#: src/LyXRC.cpp:3359 msgid "The option to print only even pages." msgstr "Voľba na tlač iba párnych strán." -#: src/LyXRC.cpp:3368 +#: src/LyXRC.cpp:3363 msgid "" "Extra options to pass to printing program after everything else, but before " "the filename of the DVI file to be printed." msgstr "" "Extra voľby pre program tlače, ktoré sa použijú tesne pred tlačou DVI súboru." -#: src/LyXRC.cpp:3372 +#: src/LyXRC.cpp:3367 msgid "Extension of printer program output file. Usually \".ps\"." msgstr "Prípona výstupu tlače. Obyčajne \".ps\"." -#: src/LyXRC.cpp:3376 +#: src/LyXRC.cpp:3371 msgid "The option to print out in landscape." msgstr "Voľba tlače na šírku." -#: src/LyXRC.cpp:3380 +#: src/LyXRC.cpp:3375 msgid "The option to print only odd pages." msgstr "Voľba na tlač iba nepárnych strán." -#: src/LyXRC.cpp:3384 +#: src/LyXRC.cpp:3379 msgid "The option for specifying a comma-separated list of pages to print." msgstr "Voľba špecifikuje čiarkami oddelený zoznam strán pre tlač." -#: src/LyXRC.cpp:3388 +#: src/LyXRC.cpp:3383 msgid "Option to specify the dimensions of the print paper." msgstr "Voľba špecifikujúca veľkosti tlačenej stránky." -#: src/LyXRC.cpp:3392 +#: src/LyXRC.cpp:3387 msgid "The option to specify paper type." msgstr "Voľba špecifikuje typ stránky." -#: src/LyXRC.cpp:3396 +#: src/LyXRC.cpp:3391 msgid "The option to reverse the order of the pages printed." msgstr "Voľba pre tlač strán v opačnom poradí." -#: src/LyXRC.cpp:3400 +#: src/LyXRC.cpp:3395 msgid "" "When set, this printer option automatically prints to a file and then calls " "a separate print spooling program on that file with the given name and " @@ -18608,7 +18611,7 @@ msgstr "" "Keď nastavené, táto voľba automaticky tlačí do súboru a potom pre tlač tohto " "súboru volá \"spool\" program s daným menom a s danými parametrami." -#: src/LyXRC.cpp:3404 +#: src/LyXRC.cpp:3399 msgid "" "If you specify a printer name in the print dialog, the following argument is " "prepended along with the printer name after the spool command." @@ -18616,31 +18619,31 @@ msgstr "" "Ak špecifikujete názov tlačiarne v dialógu pre tlač, tak nasledujúci " "argument sa spolu s názvom tlačiarne pridá k spool-príkazu." -#: src/LyXRC.cpp:3408 +#: src/LyXRC.cpp:3403 msgid "Option to pass to the print program to print to a file." msgstr "Voľba, aby program na tlač tlačil do súboru." -#: src/LyXRC.cpp:3412 +#: src/LyXRC.cpp:3407 msgid "Option to pass to the print program to print on a specific printer." msgstr "Voľba, aby program na tlač tlačil na konkrétnej tlačiarni." -#: src/LyXRC.cpp:3416 +#: src/LyXRC.cpp:3411 msgid "" "Select for LyX to pass the name of the destination printer to your print " "command." msgstr "" "Vyberte, keď chcete aby LyX preniesol názov tlačiarne ku programu pre tlač." -#: src/LyXRC.cpp:3420 +#: src/LyXRC.cpp:3415 msgid "Your favorite print program, e.g. \"dvips\", \"dvilj4\"." msgstr "Váš obľúbený program na tlač, napr. \"dvips\", \"dvilj4\"." -#: src/LyXRC.cpp:3428 +#: src/LyXRC.cpp:3423 msgid "" "Select to have visual bidi cursor movement, unselect for logical movement." msgstr "Vyberte pre vizuálny/logický pohyb kurzoru v dvojsmernom móde (bidi)" -#: src/LyXRC.cpp:3432 +#: src/LyXRC.cpp:3427 msgid "" "DPI (dots per inch) of your monitor is auto-detected by LyX. If that goes " "wrong, override the setting here." @@ -18648,12 +18651,12 @@ msgstr "" "DPI (dots per inch) pre váš monitor je automaticky zisťované LyXom. Ak to " "nefunguje správne, tu to môžete prepísať." -#: src/LyXRC.cpp:3438 +#: src/LyXRC.cpp:3433 msgid "The screen fonts used to display the text while editing." msgstr "" "Písmo obrazovky, ktoré sa použije na zobrazovanie textu pri upravovaní." -#: src/LyXRC.cpp:3447 +#: src/LyXRC.cpp:3442 msgid "" "Allow bitmap fonts to be resized. If you are using a bitmap font, selecting " "this option may make some fonts look blocky in LyX. Deselecting this option " @@ -18663,11 +18666,11 @@ msgstr "" "nastavíte túto voľbu, môžu niektoré fonty vyzerať v LyX-e hranaté. Vypnutím " "tejto voľby použije LyX najbližšiu dostupnú veľkosť bitmapového fontu." -#: src/LyXRC.cpp:3451 +#: src/LyXRC.cpp:3446 msgid "The font sizes used for calculating the scaling of the screen fonts." msgstr "Veľkosť písma používaného pre zmenu veľkosti písma obrazovky." -#: src/LyXRC.cpp:3456 +#: src/LyXRC.cpp:3451 #, no-c-format msgid "" "The zoom percentage for screen fonts. A setting of 100% will make the fonts " @@ -18676,11 +18679,11 @@ msgstr "" "Percentuálne zväčšenie písma na obrazovke. Nastavenie 100% bude predstavovať " "zhruba rovnakú veľkosť ako na papieri." -#: src/LyXRC.cpp:3460 +#: src/LyXRC.cpp:3455 msgid "Allow session manager to save and restore windows geometry." msgstr "Povoliť uloženie a znovu-nastavenie pozície okna." -#: src/LyXRC.cpp:3464 +#: src/LyXRC.cpp:3459 msgid "" "This starts the lyxserver. The pipes get an additional extension \".in\" and " "\".out\". Only for advanced users." @@ -18688,11 +18691,11 @@ msgstr "" "Toto spúšťa lyxserver. Dátovody sú rozšírené o \".in\" a \".out\". Iba pre " "pokročilých užívateľov." -#: src/LyXRC.cpp:3471 +#: src/LyXRC.cpp:3466 msgid "De-select if you don't want the startup banner." msgstr "Zrušte výber keď si neprajete transparent pri štarte." -#: src/LyXRC.cpp:3475 +#: src/LyXRC.cpp:3470 msgid "" "LyX will place its temporary directories in this path. They will be deleted " "when you quit LyX." @@ -18700,11 +18703,11 @@ msgstr "" "LyX bude umiestňovať svoje dočasné adresári do tejto cesty. Budú odstránené " "pri skončení LyXu." -#: src/LyXRC.cpp:3479 +#: src/LyXRC.cpp:3474 msgid "This is the place where the files of the thesaurus library reside." msgstr "To je miesto, kde ležia knižnice tezauru." -#: src/LyXRC.cpp:3483 +#: src/LyXRC.cpp:3478 msgid "" "The path that LyX will set when offering to choose a template. An empty " "value selects the directory LyX was started from." @@ -18712,7 +18715,7 @@ msgstr "" "Cesta, ktorú vám LyX pri voľbe šablóny ponúkne. Prázdnou hodnotou bude " "nastavený adresár, z ktorého bol LyX spustený." -#: src/LyXRC.cpp:3500 +#: src/LyXRC.cpp:3495 msgid "" "The UI (user interface) file. Can either specify an absolute path, or LyX " "will look in its global and local ui/ directories." @@ -18720,7 +18723,7 @@ msgstr "" "UI (užívateľské rozhranie) súbor. Môžete použiť absolútnu cestu, alebo LyX " "bude hľadať v globálnych a lokálnych ui/ adresároch." -#: src/LyXRC.cpp:3510 +#: src/LyXRC.cpp:3505 msgid "" "Enable use the system colors for some things like main window background and " "selection." @@ -18728,19 +18731,19 @@ msgstr "" "Umožniť používane farieb systému pre niektoré predmety ako pozadie hlavného " "okna a výber." -#: src/LyXRC.cpp:3514 +#: src/LyXRC.cpp:3509 msgid "Enable the automatic appearance of tool tips in the work area." msgstr "" "Umožniť automatické zobrazovanie bublinových nápovedí na pracovnej ploche." -#: src/LyXRC.cpp:3518 +#: src/LyXRC.cpp:3513 msgid "" "Enable the pixmap cache that might improve performance on Mac and Windows." msgstr "" "Zapnúť rýchlu vyrovnávaciu pamäť pre pixmap, ktorá môže zlepšiť výkonnosť na " "Mac-u a Windows." -#: src/LyXRC.cpp:3522 +#: src/LyXRC.cpp:3517 msgid "Specify the paper command to DVI viewer (leave empty or use \"-paper\")" msgstr "" "Špecifikujte nástavu papiera v prehliadači DVI (nechajte prázdne alebo " @@ -23689,6 +23692,15 @@ msgstr "" msgid "Unknown user" msgstr "Neznámy používateľ" +#~ msgid "" +#~ "Select if LyX should output Windows-style paths rather than Posix-style " +#~ "paths to LaTeX files. Useful if you're using the native Windows MikTeX " +#~ "rather than the Cygwin teTeX." +#~ msgstr "" +#~ "Vyberte v prípade, že má LyX do LaTeX-u produkovať cesty k súborom radšej " +#~ "vo Windows-štýle než v Posix-štýle. Užitočné pri používaní Windowsového " +#~ "MikTeX-u miesto teTeX-u pod Cygwin." + #~ msgid "List of %1$s" #~ msgstr "Zoznam od %1$s" -- 2.39.2