This commit re-enable the table adjustment with screen whenever the table is bigger than the screen. Here is some explanation form Georg about the setPos() method:
I believe that it is for horizontal
"scrolling": If you have a table that is wider than the screen and you go
to a cell that is at the right edge then, if you are lucky, the table is
shifted to the left so that you can edit the cell and even go further
right. This does however not work reliably.
If I am right then the variable name scx_ would make some sense: sc for
scrolling. The ChangeLog comments also seem to point in this direction. And
most of them were done by Jürgen Vigna who is AFAIK in Denmark.
Fix multiple tabular crashes. This needs some more work by someone who knows what insettabular::resetPos() is for. At least navigating and editing tables seems "normal".
Michael Schmitt [Fri, 20 Oct 2006 11:44:58 +0000 (11:44 +0000)]
change tracking:
* src/paragraph.h: insertXXX(...) requires either
boolean parameter 'trackChanges' or a Change
* src/insets/insettext.h: add trackChanges parameter
to setText(...)
* src/insets/*.C:
* src/*.C: adjust properly & remove a couple of FIXMEs
- Fix crash on closing a document where for instance the PDF is still open (temp directory can not be removed when another program has an open file there)
Georg Baum [Thu, 19 Oct 2006 16:51:30 +0000 (16:51 +0000)]
Use UTF8 for LaTeX export.
Known problems:
- No space is output after a \hfill. I probably broke this with the
InsetCommand patch. I'll have a look later.
- Although the encoding is now UTF8 the arguments of the inputenc package
are still the old ones, so LaTeX will not run.
- Labels and references with non-ASCII characters are broken. This needs to
be fixed in lyx::support::escape(), but this is a file format change.
- Something seems to be wrong with index entries, but this is probably also
due to the InsetCommand changes.
Hopefully temporary fix for the Tabular crash problem. Of course, this is not the right fix but I spend hours debugging through this code without success. So unless someone knows that code better...
* BufferView::updateMetrics(): add a big FIXME and don't clear out the coord_cache_.
- Fix a crash when IN is clicked multiple time in a single line document.
- Polish the behavior when the TOC is empty (clearing the button and the TOC tree)
This commit transfers the singletons defined in the Application class to the private LyX::Singletons implementation. It also put the session_ member and top_level_keymap global variable into this Singleton structure.
This commit also modifies the LyXFunc class. A LyXView is not needed any more at construction. Neither is the top level keymap. The LyXFunc key sequences are initialized only if we are in GUI mode (lyx::use_gui = true).
The next step is to rename LyXFunc::owner to LyXFunc::lyx_view_ and to put some BOOST_ASSERT. A classification between Gui and Kernel oriented LFUNs would also be welcome.
*LyX/lyx_main.[Ch]:
- LyX::Singletons: new private structure containing all the singletons (except the main LyX one of course).
- buffer_list_, top_level_keymap, session_: transfered to the LyX::Singletons structure.
* LyXFunc:
- LyXFunc: default constructor does not need any arguments.
- setupLocalKeymap(): deleted (was not used anywhere).
- initKeySequences(): new public method called from lyx_main.C, useful only in lyx::use_gui mode.
- new private member accessor methods
* Application:
- Application_pimpl: deleted (transfered to LyX)
- global singleton accessors: transfered to lyx_main.C
- start(): code transfered to LyX::priv_exec()
Georg Baum [Tue, 17 Oct 2006 21:07:16 +0000 (21:07 +0000)]
Rework InsetCommandParams interface and file storage
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
This commit fixes a crash when accessing a math inset. This was due to an invalid CursorSlice::text() null pointer accessed in InsetMathNest::cursorPos():
As you can see, I used this indirection to access the BufferView::CoordCache(). Bad luck, the passed CursorSlice was not completely valid inside a mathed inset, hence the crash. My solution is to pass BufferView to InsetBase::cursorPos() and all its derivative.
This commits cuts down LyX::exec2 into two new methods (execBatchCommands() and restoreGuiSession()) and introduce a number of helper private function to sanitize the initialization and exit process; quitLyx() is replaced with LyX::quit(). The Application starting and reset is done directly in priv_exec().
* lyx_cb.[Ch]: delete quitLyX()
* lyx_main.[Ch]
- lyx_exit(): moved to LyX::earlyExit()
- prepareExit(), quit(), earlyExit(), execBatchCommands(), initGuiFont(): new LyX methods.
- LyX::priv_exec(): restructured with above helper methods.
* src/frontends/qt3/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
* src/frontends/qt3/ui/NumberingModuleBase.ui: show scrollbar when appropriate.
* src/frontends/qt4/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
Adjust the FIXME texts and Delete commented out setXY() call following Andre comments about it:
The coordcahce is for up/down navigation and vconverting mouseclicks to text positions. It is not for pure display/export which
is what drawT is about. It was a simple oversight not to remove it after some copying from the 'real' draw() method.
Remember the char style label state and make it globally switchable.
* src/buffer:
file format incrementation to 251
* src/insets/insetcharstyle.[Ch]:
- make show_label a param and save its state
- let all-insets-toggle togle the label in charstyles
* development/FORMAT:
document file format change
* lib/lyx2lyx/LyX.py:
add new file format
* lib/lyx2lyx/lyx_1_5.py:
remove char style label param on reversion to 250.
* NoGuiFontMetrics.h: new class for command-line LyX
* NoGuiFontLoader.h: new class for command-line LyX
* Application.C:
- theFontMetrics(): returns the above dummy FontMetrics when use_gui is false.
- theFontLoader(): returns the above dummy FontLoader when use_gui is false.
revert change from previous commit and remove the FontMetrics access completely in order to be sure that bibitemWidest() gives the same bibitem GUI and no-GUI modes (even if that is potentially the wrong one.).
* MathFactory.C:
- initMath(): revert change from r15327 because initSymbols() is needed for proper math parsing.
- math_font_available(): return false if lyx::use_gui is false.
In order to support multiple LyXView each BufferView needs its own CoordCache. This is what's implemented in this commit.
theCoords is now a thing of the past and all CoordCache accesses are done via BufferView::coordCache() now. I had to modify a number of methods to pass BufferView.
projects / lyx.git / log