]>
git.lyx.org Git - features.git/log
Enrico Forestieri [Sat, 30 Mar 2013 23:19:57 +0000 (00:19 +0100)]
Update it.po
Vincent van Ravesteijn [Fri, 29 Mar 2013 17:03:10 +0000 (18:03 +0100)]
Use setSectionResizeMode from qt_helpers
This is needed to compile with Qt5.
Scott Kostyshak [Fri, 29 Mar 2013 15:34:04 +0000 (11:34 -0400)]
Exit with error if required filename is not given
This is a second attempt to fix the problem described in
6df4a7bb (
2c2c1767 reverted the first attempt).
The solution here is more general: if we get to a certain point
in the code and there is no filename, an error is given.
The following command now gives an error:
lyx -e pdf2
And the following command continues to not give an error:
lyx myfile.lyx -e pdf
Scott Kostyshak [Thu, 28 Mar 2013 07:46:35 +0000 (03:46 -0400)]
Give an error message when LyX cannot load a file
Before, the following commands correctly exited with code 1, but now
a reason for exiting is also given:
lyx -e pdf2 doesNotExist
lyx doesNotExist -e pdf2
Scott Kostyshak [Fri, 29 Mar 2013 15:20:23 +0000 (11:20 -0400)]
Revert "Exit with error if no filename given to -e switch"
This reverts commit
6df4a7bb4018c7e13e191e59fdd5d9f768ce5592 .
As Vincent points out, this commit is not correct. For one reason,
it would incorrectly exit with error for the following syntax:
lyx myfile.lyx -e pdf
I will look for a correct solution to the problem specified in the
message of the reverted commit.
Kornel Benko [Fri, 29 Mar 2013 09:52:31 +0000 (10:52 +0100)]
* sk.po
Scott Kostyshak [Thu, 28 Mar 2013 07:07:45 +0000 (03:07 -0400)]
Exit with error if no filename given to -e switch
Before, 'lyx -e pdf2' would give no error and would exit with 0. A use
case is if a user has in a bash script the following command:
lyx -e pdf2 "${mylxyfile}" || exit 1
where 'lyx' is mispelled as 'lxy' and thus yields an empty
string. If LyX does not exit with an error, the script continues where
the user probably intends for it to stop.
Scott Kostyshak [Fri, 29 Mar 2013 05:52:29 +0000 (01:52 -0400)]
Remove an empty line to make style consistent
Uwe Stöhr [Fri, 29 Mar 2013 00:53:44 +0000 (01:53 +0100)]
refine support for Vietnamese
- chkconfig.ltx: add the vietnamese.ldf
- installer trigger the installation of vntex
Jean-Marc Lasgouttes [Thu, 28 Mar 2013 13:02:21 +0000 (14:02 +0100)]
Putenv requires a char *, for some reason.
Richard Heck [Thu, 28 Mar 2013 12:32:26 +0000 (08:32 -0400)]
Remove "List of" from outliner dropdown.
Richard Heck [Wed, 27 Mar 2013 23:30:30 +0000 (19:30 -0400)]
Implement XHTML output for InsetPrintNomencl.
Richard Heck [Thu, 28 Mar 2013 00:06:56 +0000 (20:06 -0400)]
Remove debugging code.
Richard Heck [Wed, 27 Mar 2013 22:40:08 +0000 (18:40 -0400)]
Add Nomenclature to the TOC.
Richard Heck [Wed, 27 Mar 2013 23:51:49 +0000 (19:51 -0400)]
Use InsetLayout to get the tag type for TOC-like things.
Richard Heck [Wed, 27 Mar 2013 23:01:33 +0000 (19:01 -0400)]
Update the XHTML output for InsetFloatList. We'll now use an
InsetLayout to style it.
Richard Heck [Wed, 27 Mar 2013 22:36:01 +0000 (18:36 -0400)]
Minor code simplification.
Richard Heck [Wed, 27 Mar 2013 22:28:25 +0000 (18:28 -0400)]
Remove the "arrow" from the XHTML TOC. I think I put it there near
the beginning, when the titles themselves were not being used as
links. Now they are, so it is not needed.
Richard Heck [Wed, 27 Mar 2013 22:24:08 +0000 (18:24 -0400)]
Move the CSS for the TOC to its own InsetLayout.
Richard Heck [Wed, 27 Mar 2013 22:22:20 +0000 (18:22 -0400)]
Use the TOC:Listings layout to hold CSS information for it.
Richard Heck [Wed, 27 Mar 2013 21:19:47 +0000 (17:19 -0400)]
A little bit more cleaning up.
Richard Heck [Wed, 27 Mar 2013 21:17:57 +0000 (17:17 -0400)]
Re-order things a little bit.
Richard Heck [Wed, 27 Mar 2013 21:16:34 +0000 (17:16 -0400)]
Factor common code from TOC updates.
Richard Heck [Wed, 27 Mar 2013 21:06:38 +0000 (17:06 -0400)]
Allow for the possibility of an "InsetLayout TOC".
Richard Heck [Wed, 27 Mar 2013 20:58:44 +0000 (16:58 -0400)]
Get lists of listings working for XHTML output. Fixes bug #8602.
Richard Heck [Wed, 27 Mar 2013 19:46:32 +0000 (15:46 -0400)]
Links between citations and bibliography entries were broken in XHTML
output, due to failure to clean the ids in the new citation stuff.
I've solved this by allowing the citation format information to contain
keys of the form "clean:key". This signals that we are to apply the
html::cleanAttr() function to the key before returning it. I.e., we
strip non-alphanumeric stuff, basically.
Richard Heck [Wed, 27 Mar 2013 19:46:06 +0000 (15:46 -0400)]
Forgot to include "u" as a font tag.
Richard Heck [Wed, 27 Mar 2013 18:51:27 +0000 (14:51 -0400)]
Use master buffer's setting for math output type.
Richard Heck [Wed, 27 Mar 2013 18:45:16 +0000 (14:45 -0400)]
Continuing here will crash us. This shouldn't be an issue, but
it seems worth doing something sensible.
Kornel Benko [Wed, 27 Mar 2013 18:22:05 +0000 (19:22 +0100)]
* sk.po
Richard Heck [Wed, 27 Mar 2013 18:01:01 +0000 (14:01 -0400)]
Style Memoir epigraphs.
Richard Heck [Wed, 27 Mar 2013 16:49:03 +0000 (12:49 -0400)]
Handle other text ranges in XHTML output.
Richard Heck [Wed, 27 Mar 2013 16:05:00 +0000 (12:05 -0400)]
Disable extractFunctions() for MathML and HTML output.
I'm not sure there was all that much benefit to doing this, but
if so then it could be re-enabled, if we fixed extractFunctions().
Richard Heck [Wed, 27 Mar 2013 16:01:44 +0000 (12:01 -0400)]
Add some notes about problems with extractFunctions().
Richard Heck [Wed, 27 Mar 2013 15:41:29 +0000 (11:41 -0400)]
Implement math-as-HTML output for InsetMathExFunc.
Richard Heck [Mon, 25 Mar 2013 21:33:54 +0000 (17:33 -0400)]
Fix bug #8608: Don't output index entries from notes, etc.
Richard Heck [Mon, 25 Mar 2013 21:33:18 +0000 (17:33 -0400)]
Should also use doing_output here. Oversight in previous commit.
Juergen Spitzmueller [Mon, 25 Mar 2013 08:28:49 +0000 (09:28 +0100)]
Add new spelling icon to the Makefile and add oxygen version
Vincent van Ravesteijn [Sun, 24 Mar 2013 19:26:40 +0000 (20:26 +0100)]
Add a toolbar button for continuous spellchecking
This fixes the second part of #8589.
Vincent van Ravesteijn [Sun, 24 Mar 2013 18:20:19 +0000 (19:20 +0100)]
Add an LFUN for continuous spell checking
This fixes the first part of #8589.
Vincent van Ravesteijn [Sun, 24 Mar 2013 16:52:48 +0000 (17:52 +0100)]
Do not sort formats in BufferParams::exportableFormats
We only need to sort the formats when it is really necessary, i.e. for GUI
purposes.
This also prevents 11000 requests for translation everytime the toolbars
are updated.
Vincent van Ravesteijn [Sun, 24 Mar 2013 16:52:03 +0000 (17:52 +0100)]
Remove unused typedef
Juergen Spitzmueller [Sun, 24 Mar 2013 15:56:19 +0000 (16:56 +0100)]
Stick with 2.0.x file format
Juergen Spitzmueller [Sun, 24 Mar 2013 15:52:42 +0000 (16:52 +0100)]
Revert "Compilation fixes"
This reverts commit
c28d9b41adcc8cf738ce32721c480d00ff8df9cb .
Juergen Spitzmueller [Sun, 24 Mar 2013 15:46:20 +0000 (16:46 +0100)]
Compilation fixes
Vincent van Ravesteijn [Sun, 24 Mar 2013 12:35:44 +0000 (13:35 +0100)]
Add a WIN32 equivalent for gettimeofday
This function does not really returns the "time of day", but it will suffice to evaluate elapsed times.
Vincent van Ravesteijn [Mon, 18 Mar 2013 21:01:09 +0000 (22:01 +0100)]
Small simplification
Richard Heck [Sun, 24 Mar 2013 14:14:17 +0000 (10:14 -0400)]
Minor doc update.
Richard Heck [Sun, 24 Mar 2013 13:39:41 +0000 (09:39 -0400)]
Don't abbreviate titles in TOC.
Richard Heck [Sun, 24 Mar 2013 13:34:00 +0000 (09:34 -0400)]
Fix bug #8603: We want unabbreviated TOC entries here.
Richard Heck [Sun, 24 Mar 2013 13:33:47 +0000 (09:33 -0400)]
Silly mistake here in earlier commit.
Kornel Benko [Sat, 23 Mar 2013 14:31:21 +0000 (15:31 +0100)]
prefs2prefs: While handling converters, make sure
the entry is really '\converter' and not e.g. '\converter_cache_maxage'
Richard Heck [Sat, 23 Mar 2013 14:05:56 +0000 (10:05 -0400)]
Fix bug #8604: Forgot not to escape the caption string in listings.
Richard Heck [Sat, 23 Mar 2013 13:35:26 +0000 (09:35 -0400)]
Fix a couple problems with new prefs2prefs material.
Richard Heck [Sat, 23 Mar 2013 13:14:44 +0000 (09:14 -0400)]
Crush warning.
Richard Heck [Sat, 23 Mar 2013 13:10:01 +0000 (09:10 -0400)]
Fix a few more translation probelms for XHTML output.
Scott Kostyshak [Fri, 22 Mar 2013 19:09:59 +0000 (15:09 -0400)]
InsetGraphics: add a layoutName method
Now when using inset-forall, "Graphics" can be used
to refer to all Graphics insets.
Georg Baum [Sat, 23 Mar 2013 08:26:04 +0000 (09:26 +0100)]
forgot format entry
Georg Baum [Fri, 22 Mar 2013 21:23:38 +0000 (22:23 +0100)]
Support \caption* (bug #3209)
This was a low hanging fruit which would have to wait for a long time because
of a file format change if it was not implemented before 2.1.
Jean-Marc Lasgouttes [Fri, 22 Mar 2013 13:41:57 +0000 (14:41 +0100)]
Implement inset-select-all in mathed
Jean-Marc Lasgouttes [Fri, 22 Mar 2013 10:23:48 +0000 (11:23 +0100)]
More documentation for the poor man's profiler
Jean-Marc Lasgouttes [Thu, 21 Mar 2013 11:14:21 +0000 (12:14 +0100)]
A poor man's profiler.
The use of this profiler is trivial:
* #include <support/pmprof.h>
* in the block one wants to profile, add
PROFILE_THIS_BLOCK(some_identifier)
* At the end of the execution, statistics will be sent to standard error.
Uwe Stöhr [Fri, 22 Mar 2013 01:00:25 +0000 (02:00 +0100)]
tex2lyx: we support now \framebox without options
-> this is \fbox
- also update the tex2lyx example file result
Uwe Stöhr [Fri, 22 Mar 2013 00:33:58 +0000 (01:33 +0100)]
support for \mbox and \fbox
- fileformat change
- it was a pity that LyX did not yet support a simple rectangular frame without a defined width but LyX did this for e.g. oval frames
- \fbox and \mbox often occur in TeX files and can now be imported
Georg Baum [Thu, 21 Mar 2013 19:13:02 +0000 (20:13 +0100)]
Split pdf format as discussed on the list
Previously, the format used for included pdf files was the same as for
document export via ps2pdf. This caused unwanted conversion routes, e.g.
export via odt->pdf instead of dvi->ps->pdf.
I renamed the format for included graphics and not for exported documents,
since otherwise the command line syntax for export would change. This would
require more adaptions for the users, since with the chosen solution the
custom converters are almost always changed correctly in prefs2prefs(),
so that only custom external templates need manual adjustement.
Uwe Stöhr [Thu, 21 Mar 2013 01:11:42 +0000 (02:11 +0100)]
lyx2lyx/lyx_2_1.py: typos
Kornel Benko [Wed, 20 Mar 2013 19:51:50 +0000 (20:51 +0100)]
Cmake build: Unfortunatelly, there are some cmake versions
which have not error-free version of FindQt4.cmake.
We have to stick with our own (and old) module.
Juergen Spitzmueller [Wed, 20 Mar 2013 12:59:25 +0000 (13:59 +0100)]
avoid redundant toolbar initialization
Juergen Spitzmueller [Wed, 20 Mar 2013 12:01:48 +0000 (13:01 +0100)]
Fix the zombie toolbar problem (bug #8520)
Kornel Benko [Wed, 20 Mar 2013 10:39:45 +0000 (11:39 +0100)]
cmake build: Add check for required QT-version 4.5.0 or higher
Since our own module does not respect the version parameter,
while the cmake provided does, also remove our FindQt4.cmake
Uwe Stöhr [Tue, 19 Mar 2013 23:20:27 +0000 (00:20 +0100)]
languages: fix support for Serbian Cyrillic
- there is a Serbian Cyrillic support file for babel available. Its support works the same as for Lithuanian, Belarusian, etc.
- fixes bug #8590
Uwe Stöhr [Tue, 19 Mar 2013 23:12:16 +0000 (00:12 +0100)]
installer: support for Serbian Cyrillic
Uwe Stöhr [Tue, 19 Mar 2013 22:53:17 +0000 (23:53 +0100)]
languages: update support for Kazakh
as discussed on the list, as there is not support for Kazakh in babel we must assure that the T2A fontenc is loaded
Georg Baum [Tue, 19 Mar 2013 20:24:51 +0000 (21:24 +0100)]
Update test references
Georg Baum [Tue, 19 Mar 2013 20:17:15 +0000 (21:17 +0100)]
Update lyxrc.defaults to current format
Actually, configure.py was already producing the current format, since it
did not output default_language.
Scott Kostyshak [Tue, 19 Mar 2013 18:48:20 +0000 (14:48 -0400)]
GuiTabular: disabling is now done on textChanged()
Before, it was done on editingFinished(). The new behavior is more
intuitive because it is easier for the user to see how editing the box
is connected with enabling/disabling the other widgets. Before, the user
would not get instant feedback and would have to click away before the
connection is revealed. This new behavior is less efficient, however,
because checkEnabled() is called after every keystroke.
Scott Kostyshak [Tue, 19 Mar 2013 07:16:07 +0000 (03:16 -0400)]
GuiTabular: LC and ED should both be disabled
Previously, only columnWidthED was disabled.
Jean-Marc Lasgouttes [Tue, 19 Mar 2013 15:17:40 +0000 (16:17 +0100)]
Continue pre-spring cleaning of configure script
* build-type=profiling implies -fno-omit-frame-pointer in gcc. This allows sysprof to yield proper call trees
* remove --enable-grpof option (the build type is enough)
* remove --with-frontend option since we have only one frontend. Move stuff around and generally simplify the Qt detection code
* do not check for bc anymore.
* Update README.
Richard Heck [Tue, 19 Mar 2013 15:30:09 +0000 (11:30 -0400)]
Fix bug #8587 properly, by using local language for translation.
Jean-Marc Lasgouttes [Tue, 19 Mar 2013 14:38:47 +0000 (15:38 +0100)]
Small updates to the configure script
Remove some tests that are not needed. Put --enable and --with options together in help output.
Jean-Marc Lasgouttes [Tue, 19 Mar 2013 13:21:57 +0000 (14:21 +0100)]
Get rid of LYX_ERROR in our configure file.
We use the standard AC_MSG_ERROR instead, which just stops the configure process where the problem happens.
Jean-Marc Lasgouttes [Tue, 19 Mar 2013 11:59:38 +0000 (12:59 +0100)]
Add a test to configure for minimal Qt version
* use AS_COMPARE_VERSION to check whether the Qt version is correct.
* upgrade minimal requirement for autoconf to version 2.60 (released in 2006!).
Juergen Spitzmueller [Tue, 19 Mar 2013 08:58:22 +0000 (09:58 +0100)]
powerdot-example: extensions and comments
Uwe Stöhr [Tue, 19 Mar 2013 00:18:38 +0000 (01:18 +0100)]
tex2lyx: support for Iwona fonts
- also correct the support for the Kurier fonts. Thanks to our cleaner implementation, some code can now go.
Uwe Stöhr [Mon, 18 Mar 2013 23:57:50 +0000 (00:57 +0100)]
Merge branch 'master' of git.lyx.org:lyx
Uwe Stöhr [Mon, 18 Mar 2013 23:57:37 +0000 (00:57 +0100)]
support for the Iwona fonts
- the support for Iwona is exactly the same as for the Kurier fonts
- fileformat change
Richard Heck [Fri, 8 Mar 2013 23:09:28 +0000 (18:09 -0500)]
Don't try to show the status message if we are busy.
Intended to fix #8523.
Richard Heck [Mon, 18 Mar 2013 23:47:17 +0000 (19:47 -0400)]
Make things a little better with respect to bug #8587.
Is it possible to figure out the current language from within
an InsetRef? If so, how?
Richard Heck [Mon, 18 Mar 2013 23:32:30 +0000 (19:32 -0400)]
Allowing direct, read-write access to the references cache just seems
like a bad idea.
Richard Heck [Mon, 18 Mar 2013 23:30:17 +0000 (19:30 -0400)]
Add FIXME concerning bug #8599.
Richard Heck [Mon, 18 Mar 2013 22:56:38 +0000 (18:56 -0400)]
I'm not absolutely sure about this, but it seems to me as if we
need the master buffer here, too: in looking up fonts during XHTML
output.
I'm half tempted to pass the master buffer to these routines, though
there are times, I think, when we want the actual buffer: e.g., when
looking up branches.
Richard Heck [Mon, 18 Mar 2013 22:46:08 +0000 (18:46 -0400)]
We don't need to reset counters we aren't using.
Richard Heck [Mon, 18 Mar 2013 22:45:09 +0000 (18:45 -0400)]
Fix bug #8598. We need to use the masterBuffer's counters in the
XHTML output routines.
Richard Heck [Mon, 18 Mar 2013 22:08:31 +0000 (18:08 -0400)]
Fix bug #8597: Output only (ref) for \eqref, not: equation (ref).
Vincent van Ravesteijn [Mon, 18 Mar 2013 19:42:20 +0000 (20:42 +0100)]
Fix monolithic build
Kornel Benko [Mon, 18 Mar 2013 17:47:27 +0000 (18:47 +0100)]
* sk.po
Juergen Spitzmueller [Mon, 18 Mar 2013 15:12:04 +0000 (16:12 +0100)]
de.po: yet some changes
Juergen Spitzmueller [Mon, 18 Mar 2013 15:05:38 +0000 (16:05 +0100)]
Oops
Juergen Spitzmueller [Mon, 18 Mar 2013 15:01:43 +0000 (16:01 +0100)]
de.po
Juergen Spitzmueller [Mon, 18 Mar 2013 14:06:49 +0000 (15:06 +0100)]
Capitalization fix.
This would be a file format change, but since the previous version is just two hours old, I will do without.