Improve the performance of the source panel by using a QTimer.
Fix bug #9493. The source panel was very slow with auto-update on. Now
we use a timer that ensures that the source is generated only at
rest. The delay is short or long depending on whether we show the
source of a paragraph or the whole source.
When using -std=c++11, the cygwin compiler automatically defines
__STRICT_ANSI__ which is used as a guard for not declaring essential
unix standard calls such as setenv, popen, etc. As a result,
compilation stops with errors such as "xxxx has not been declared".
By undefining the guard, compilation succeeds and lyx works Ok.
In order to adjust the path of an included file, when deciding
whether the document was moved or not, it is not sufficient
comparing the paths because the document could have been accessed
through a symbolic link.
Compiler that are known to support C++11 (gcc >= 4.3 and clang) are
now used in this mode by default. It is still possible to override
this choice using --(en|dis)able-cxx11.
Moreover, c++11 mode is detected from the compiler itself, not from
the use of --enable-cxx11. This allows to support compilers other
than gcc or clang.
Update INSTALL file accordingly and clean it a little bit.
Georg Baum [Fri, 4 Sep 2015 19:24:01 +0000 (21:24 +0200)]
Work around crash on command line export
This was a regression of 0c093a626472c7. The crash was found by the tex2lyx
test case test-insets.tex: Running lyx -f main -e pdflatex test-insets.lyx.lyx
did crash. This is not a real fix, but will do for now since previews are not
needed in command line mode (I wonder why they are generated at all?) In the
long term, we need theApp() to return a console application in commandline
mode to eliminate the existing sifferences between export from GUI and
commandline.
This replaces commit 329eae56 with a better solution. Indeed, while
__cpluplus is useless with g++ 4.[3-6] because its value is always 1,
these compilers define __GXX_EXPERIMENTAL_CXX0X__ when "-std c++0x" is used.
Therefore the code now relies on both macros to detect C++11 mode
instead of setting it when --enable-cxx11 is used.
Also, use pure c++ mode instead of gnu++ extensions on gcc
Günter Milde [Wed, 26 Aug 2015 22:04:19 +0000 (00:04 +0200)]
Remove problematic workaround for "exotic" problem
Greek and Times under MikTeX with auto-install may fail due to a half-installed
font package. However, the workaround in LyX stands in the way of
alternative approaches (see bug #6469).
Günter Milde [Thu, 13 Aug 2015 09:15:19 +0000 (11:15 +0200)]
New lfun "accent-perispomeni".
This function inserts a COMBINING GREEK PERISPOMENI character that is
normalized to pre-composed characters for base characters where a
corresponding WITH PERISPOMENI character exists.
When a row is too large due to a wide inset, it does not make sense to
break text before if the problem is the same in the next row.
Therefore give up breaking in this case.
Note that this was explicitely taken care of in the old-world
rowBreakPoint code.
Scott Kostyshak [Wed, 19 Aug 2015 01:55:59 +0000 (21:55 -0400)]
Refresh file cache before checking existence
This is done only inside LFUN_BUFFER_VIEW_CACHE so as to preserve
the benefits of caching in other places.
Without this commit, if a converter or a user (re)moves the preview
file and then calls buffer-view-cache LyX will launch the viewer for
a file that does not exist.
For a discussion and use case, see:
https://www.mail-archive.com/search?l=mid&q=55D393D7.6050403@lyx.org
Both \origin and \textclass tags may be paths and contain spaces.
In this case, enclose them in double quotes such that they can be
correctly read by the lexer.
Scott Kostyshak [Fri, 24 Jul 2015 03:27:47 +0000 (23:27 -0400)]
Set font in BufferView::setCursor (#9500)
This solves a few bugs related to the font not being set correctly.
For example, when putting a selection somewhere with
putSelectionAt(), the font was not reset so that before this commit
if the cursor was in an ERT, strange things could happen.
putSelectionAt() is notably used when highlighting the location
corresponding with a LaTeX error (GuiErrorList), when using find,
and when using the spellcheck. I could reproduce the bug using all
three of these.
Bug #9500 is an example of the type of bugs that this commit fixes.
Instead of remembering the last breakable element in the row, search
backward in the row and consider all string elements one by one until
a correct place to break is found.
This fixes the case where the row ends with a string, but there is no
space soon enough in the string to break it here. In this case, we
need to consider the previous row.
Richard Heck [Wed, 22 Jul 2015 15:04:35 +0000 (11:04 -0400)]
Fix bug noticed by Pavel. Apparently, some changes Abdel made to preview loading for 2.1.x broke LyXHTML preview of math as images.
We have been here before. The png files are generated, but then by the time we preview the document, they are gone. This is because (a) when the PreviewLoader for a Buffer is deleted, it removes all its previews and (b) we export in a clone, so that Buffer gets deleted before the preview is actually shown. So we need to check whether we are a preview for a clone before we delete anything.
The first change is to concentrate on the last ro elements that contain separators and try to break it a a width that is shorter than both
- its current width (we want to break it, after all)
- the amount of space available.
With this patch, the cursor position before undo can be saved when
creating an undo group. Any such value will supercede parameters
passed to recordUndo. Only the first such cursor set by nested
beginUndoGoup takes effect.
Reset cursor font when entring an inset with char-forward/backward
When entering an inset from the keyboard, setCurrentFont()
was not called and thus the cursor retained the font that was set
before. This could create strange behavior that could often go
unnoticed by the user.
It is easy to imagine many other situations similar to #9597 where
the user could trigger this bug.
* GuiFontMetrics::pos2x, x2pos: add support for inter-word spacing.
* GuiPainter::text: idem
* Row::Element::countSeparators:
Row::countSeparators: new methods that count spaces in strings.
Row::setSeparatorExtraWidth: new method (code lifted from TextMetrics.cpp).
* TextMetrics::computeRowMetrics: rely on the above methods.
* RowPainter::paintMispelledMarked: pass only a Row::Element object reference
RowPainter::paintStringAndSel: idem; do not rely on values returned by
Painter::text (trailing spaces do not honor wordspacing value).
The goal of this commit is to make painting faster by reducing the
number of strings to paint. To this end, it is necessary to include
spaces in row elements.
Also importantly, this commit should fix existing problems with line
breaking in chinese text.
* TextMetrics::breakRow: do not do anything special for word separators.
* Row::add: when adding a character to a row element, keep the string
width updated. If need be, it is possible to tweak this by updating
every 10 characters, for example.
* GuiFontMetrics::breakAt (new): use QTextLayout to break text either
at word boundary or at an arbitrary width.
* Row::Element::breakAt: use the above method.
* Row::shortenIfNeeded: simplify now that because there is no need for
handling separator elements. This will be taken care of by the
improved breakAt.
Georg Baum [Mon, 20 Jul 2015 19:14:45 +0000 (21:14 +0200)]
Support Photos in RasterImage template
Actually photos (i.e. .jpg files) where supported previously, but for pdflatex
output an unneeded conversion to png was done. The RasterImage templates
behaves now exactly as InsetGraphics for these files: If the input format is
jpg, use that for pdflatex, else convert to png.
Georg Baum [Mon, 20 Jul 2015 19:05:34 +0000 (21:05 +0200)]
Replace LaTeX logo with plain text
This is another advantage of the new logo insets: We see in LyX where they are
inserted for the output. In these two cases, the text describes keywords of
the external template configuration file language, so these should not be
typeset as logos.
Georg Baum [Sun, 19 Jul 2015 11:42:22 +0000 (13:42 +0200)]
Add template for vector graphics
The difference to bitmap graphics is that these will be included as PDF for
pdflatex, so the vector properties are retained if a suitable conversion path
exists.
Georg Baum [Sat, 18 Jul 2015 14:41:52 +0000 (16:41 +0200)]
Remove relative units from bounding box
When adding units to the external inset bounding box I overlooked that
InsetGraphics supports only bb, cm, mm and in. Therefore I added too many
units for the external insets. We are not as strict as the graphics inset
and allow all absolute units, but no relative ones.