#LyX 2.4 created this file. For more info see https://www.lyx.org/
-\lyxformat 610
+\lyxformat 614
\begin_document
\begin_header
\save_transient_properties true
Richard Kimberly Heck
\noun default
.
- If you have comments or error corrections, please send them to the \SpecialChar LyX
- Documentati
-on mailing list,
+ If you have comments or error corrections,
+ please send them to the \SpecialChar LyX
+ Documentation mailing list,
+
\begin_inset Flex Code
status collapsed
\end_inset
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted 5863208 1672865652
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+
+\change_inserted 5863208 1672865674
+Note to all translators:
+\end_layout
+
+\begin_layout Plain Layout
+
+\change_inserted 5863208 1672865817
+This manual was restructured for LyX 2.4.
+ Attached are notes for translators to help them to find their way round the new structure of Additional.lyx.
+ This note itself will be deleted in the final 2.4 release.
+\begin_inset Newline newline
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+
+\change_inserted 5863208 1672865801
+
+\series bold
+Additional.lyx 2.4 Changes
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Chapter 1:
+ none
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Chapter 2:
+ none
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Chapter 3:
+ Document classes:
+ new chapter
+\end_layout
+
+\begin_deeper
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+AMS LaTeX:
+ moved and minor edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Extra font styles:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Hebrew:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Japanese:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+KOMA-Script:
+ moved and significant edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Polish:
+ moved and minor edit
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Tufte:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+A&A Paper:
+ moved and minor edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+AASTeX:
+ moved
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Chess:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Elsevier:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865801
+Paper:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865824
+RevTeX:
+ moved
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Springer:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Memoir:
+ moved
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Recipe Book:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Curricula vitae:
+ all new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Letters:
+ all new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Beamer:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Foils:
+ moved with minor edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Powerdot:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Seminar:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Slides:
+ moved with minor edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Reports:
+ new
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Broadway:
+ moved
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Hollywood:
+ moved
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+(Note that document classes which appeared in 2.3 but do not appear in 2.4 were either removed previously or have been removed during this revision because they are no longer available anywhere.)
+\end_layout
+
+\end_deeper
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Chapter 4:
+ Modules:
+ new chapter
+\end_layout
+
+\begin_deeper
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+All module descriptions new except:
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Customizable lists:
+ moved with minor edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Custom header/footer text:
+ moved with minor edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Multiple columns:
+ moved with minor edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Custom paragraph shapes:
+ moved with minor edits
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Initials:
+ moved with minor edits
+\end_layout
+
+\end_deeper
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Chapter 5:
+ Bibliography:
+ new chapter
+\end_layout
+
+\begin_deeper
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Content moved but unchanged
+\end_layout
+
+\end_deeper
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865831
+Chapter 6:
+ Bullets:
+ new chapter
+\end_layout
+
+\begin_deeper
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865845
+Content moved but unchanged
+\end_layout
+
+\end_deeper
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865845
+Chapter 9:
+ DocBook output:
+ new chapter and content
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865845
+All other chapters unchanged but renumbered except:
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted 5863208 1672865845
+section 11.3 Literate programming:
+ minor edits
+\change_unchanged
+
+\end_layout
+
+\end_inset
+
+
\end_layout
\begin_layout Chapter
User's Guide\SpecialChar endofsentence
\emph default
- The reason for separating the two documents is simple: the
+ The reason for separating the two documents is simple:
+ the
\emph on
User's Guide
\emph default
- is already quite lengthy, and it contains information on all of the basic
- features one needs to know in order to prepare most documents.
- However, the \SpecialChar LyX
+ is already quite lengthy,
+ and it contains information on all of the basic features one needs to know in order to prepare most documents.
+ However,
+ the \SpecialChar LyX
Team has worked to make \SpecialChar LyX
- extensible through various configuration
- files and external packages.
+ extensible through various configuration files and external packages.
That means that if you want to support the Fizzwizzle \SpecialChar LaTeX
- package, you can
- create a layout file (or module) for it without having to alter \SpecialChar LyX
+ package,
+ you can create a layout file (or module) for it without having to alter \SpecialChar LyX
itself.
- We've already had contributions of several new features this way, and some
- of them are documented here.
- There are also some more `advanced' features, such as how to control the
- presentation of bibliographies and how to work with multi-part documents,
+ We've already had contributions of several new features this way,
+ and some of them are documented here.
+ There are also some more `advanced' features,
+ such as how to control the presentation of bibliographies and how to work with multi-part documents,
that are not covered in the
\emph on
User's Guide
\end_layout
\begin_layout Standard
-This manual also documents some special features, like fax support
+This manual also documents some special features,
+ like fax support
\change_deleted 244031559 1603802929
,
+
\change_inserted 244031559 1603802931
and
\change_unchanged
version control
\change_deleted 244031559 1603802954
-, and SGML support
+,
+ and SGML support
\change_unchanged
-, which require additional software to work properly.
+,
+ which require additional software to work properly.
There is also a chapter on \SpecialChar LyX
's support for HTML.
- And lastly, there's a chapter of \SpecialChar LaTeX
- tools and tips, things you can use to
- spruce up your documents by directly using the powerful features of \SpecialChar LaTeX
+ And lastly,
+ there's a chapter of \SpecialChar LaTeX
+ tools and tips,
+ things you can use to spruce up your documents by directly using the powerful features of \SpecialChar LaTeX
.
- After all, \SpecialChar LyX
+ After all,
+ \SpecialChar LyX
\emph on
is
\emph default
- only WYSIWYM and will only ever interface to some, not all, \SpecialChar LaTeX
+ only WYSIWYM and will only ever interface to some,
+ not all,
+ \SpecialChar LaTeX
features.
\end_layout
\emph on
Introduction
\emph default
- yet, you are definitely in the wrong manual.
+ yet,
+ you are definitely in the wrong manual.
The
\emph on
Introduction
\emph default
- is the first place to go, since it describes the notation and format of
- all of the manuals.
+ is the first place to go,
+ since it describes the notation and format of all of the manuals.
You should also be thoroughly familiar with the
\emph on
User's Guide
\begin_layout Standard
Since many of the topics in this manual depend heavily on \SpecialChar LyX
-'s interaction
- with \SpecialChar LaTeX
-, this first chapter covers the inner workings of \SpecialChar LyX
- and how to direct
- \SpecialChar LyX
+'s interaction with \SpecialChar LaTeX
+,
+ this first chapter covers the inner workings of \SpecialChar LyX
+ and how to direct \SpecialChar LyX
to generate exactly the \SpecialChar LaTeX
code you want.
It is obviously for more seasoned \SpecialChar LyX
This chapter is for both \SpecialChar TeX
-nicians and the \SpecialChar LaTeX
-curious.
- In it, we'll explain how \SpecialChar LyX
+ In it,
+ we'll explain how \SpecialChar LyX
and \SpecialChar LaTeX
work together to produce printable output.
- This is the only place in any of the manuals where we assume you know something
- about \SpecialChar LaTeX
+ This is the only place in any of the manuals where we assume you know something about \SpecialChar LaTeX
.
\end_layout
\begin_layout Standard
-At one time, \SpecialChar LyX
+At one time,
+ \SpecialChar LyX
was called a
\begin_inset Quotes eld
\end_inset
\begin_layout Plain Layout
Some familar ones are \SpecialChar TeX
-maker and kile, on Linux, and \SpecialChar TeX
-shop, OSX.
+maker and kile,
+ on Linux,
+ and \SpecialChar TeX
+shop,
+ OSX.
There are also the \SpecialChar LaTeX
- modes for vi and emacs, of course.
+ modes for vi and emacs,
+ of course.
\end_layout
\end_inset
These are basically text editors with the ability to run \SpecialChar LaTeX
- and mark any
- errors in the file you're editing.
+ and mark any errors in the file you're editing.
Although \SpecialChar LyX
\emph on
is
\emph default
- an editor, and it
+ an editor,
+ and it
\emph on
does
\emph default
run \SpecialChar LaTeX
-, and it also indicates errors in the file, it also does much, much
- more.
- For one thing, you don't need to know \SpecialChar LaTeX
+,
+ and it also indicates errors in the file,
+ it also does much,
+ much more.
+ For one thing,
+ you don't need to know \SpecialChar LaTeX
to use \SpecialChar LyX
effectively.
And \SpecialChar LyX
has added its own extensions to \SpecialChar LaTeX
.
- Try the following sometime: select
+ Try the following sometime:
+ select
\begin_inset Flex Noun
status collapsed
\end_inset
-), then look at the preamble of the resulting
+),
+ then look at the preamble of the resulting
\begin_inset Flex Code
status collapsed
file.
You'll notice a variety of new macros defined specifically by \SpecialChar LyX
.
- These macros are defined automatically, according to the features you use
- in the document.
+ These macros are defined automatically,
+ according to the features you use in the document.
\end_layout
\begin_layout Standard
\begin_layout Standard
They will only invoke \SpecialChar LaTeX
if the file has changed since the last time \SpecialChar LaTeX
- was
- run.
+ was run.
\end_layout
\begin_layout Standard
When \SpecialChar LyX
runs \SpecialChar LaTeX
- on the file you're editing, it performs these steps:
+ on the file you're editing,
+ it performs these steps:
\end_layout
\begin_layout Enumerate
\end_inset
- file (maybe several times), and run any other commands (such as
+ file (maybe several times),
+ and run any other commands (such as
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Enumerate
-If there are any errors, show the error log.
+If there are any errors,
+ show the error log.
\end_layout
\begin_layout Standard
\end_inset
-, \SpecialChar LyX
+,
+ \SpecialChar LyX
then runs a DVI viewer to display the DVI-file.
If you have used
\begin_inset Flex Noun
\end_inset
-, \SpecialChar LyX
+,
+ \SpecialChar LyX
performs further steps:
\end_layout
\end_layout
\begin_layout Enumerate
-Run a PostScript viewer, such as
+Run a PostScript viewer,
+ such as
\begin_inset Flex Code
status collapsed
\end_inset
-, to display the PostScript file.
+,
+ to display the PostScript file.
\end_layout
\begin_layout Standard
\SpecialChar LyX
- does similar things when viewing, or exporting, other formats.
+ does similar things when viewing,
+ or exporting,
+ other formats.
\end_layout
\begin_layout Section
\end_inset
- can also be run from the command line, of course.
+ can also be run from the command line,
+ of course.
\end_layout
\end_inset
\end_inset
will translate most legal \SpecialChar LaTeX
-, but not everything.
+,
+ but not everything.
It will put things it doesn't understand into \SpecialChar TeX
- code, so after translating
- a file with
+ code,
+ so after translating a file with
\begin_inset Flex Code
status collapsed
\end_inset
-, you can look for \SpecialChar TeX
+,
+ you can look for \SpecialChar TeX
code and hand-edit it until it looks right.
\end_layout
\begin_layout Standard
If you don't know what \SpecialChar TeX
- code is, read the next section.
+ code is,
+ read the next section.
\end_layout
\begin_layout Section
\begin_layout Standard
Anything you can do in \SpecialChar LaTeX
you can do in \SpecialChar LyX
-, for a very simple reason: You can
- always insert \SpecialChar TeX
+,
+ for a very simple reason:
+ You can always insert \SpecialChar TeX
code into any \SpecialChar LyX
document.
\SpecialChar LyX
- cannot, and will never be able to, display every possible \SpecialChar LaTeX
+ cannot,
+ and will never be able to,
+ display every possible \SpecialChar LaTeX
construct.
If ever you need to insert \SpecialChar LaTeX
commands into your \SpecialChar LyX
- document, you can use the
-
+ document,
+ you can use the
\begin_inset Flex Code
status collapsed
\end_inset
- box, which you can insert into your document with
+ box,
+ which you can insert into your document with
\begin_inset Flex Noun
status collapsed
\begin_inset Newline newline
\end_inset
-can put nearly everything in it, even (non-floating)
+can put nearly everything in it,
+ even (non-floating)
\begin_inset Newline newline
\end_inset
\begin_layout Plain Layout
This is an example of a minipage environment.
- You can put nearly everything in it, even (non-floating) figures and tables.
+ You can put nearly everything in it,
+ even (non-floating) figures and tables.
\end_layout
\begin_layout Standard
In addition to using \SpecialChar TeX
- code, you can also create a separate file containing
- some complex \SpecialChar LaTeX
+ code,
+ you can also create a separate file containing some complex \SpecialChar LaTeX
structure and then use
\begin_inset Flex Noun
status collapsed
know
\emph default
works already.
- Otherwise, you'll have a big job tracking down \SpecialChar LaTeX
+ Otherwise,
+ you'll have a big job tracking down \SpecialChar LaTeX
errors.
\end_layout
\end_layout
\begin_layout Standard
-On that last point, \SpecialChar LyX
- does have quite a few features tucked into it, and
- more are coming.
+On that last point,
+ \SpecialChar LyX
+ does have quite a few features tucked into it,
+ and more are coming.
Be sure to check the manuals to make sure that \SpecialChar LyX
- doesn't have such-and-such
- feature before you decide you have to do it by hand.
- Moreover, there are numerous \SpecialChar LaTeX
+ doesn't have such-and-such feature before you decide you have to do it by hand.
+ Moreover,
+ there are numerous \SpecialChar LaTeX
packages out there to do all sorts of things,
from labels to envelopes to fancy multipage tables.
Check out
\end_layout
\begin_layout Standard
-If you do need to do some wild and fancy things within your document, be
- sure to check out a good \SpecialChar LaTeX
+If you do need to do some wild and fancy things within your document,
+ be sure to check out a good \SpecialChar LaTeX
book for assistance.
There are a number of them listed in the bibliography of the
\emph on
\begin_layout Standard
If you already know \SpecialChar LaTeX
-, there is no need to explain here what the preamble
- is good for.
- If you don't, the following will give you some ideas—we recommend again
- that you consult a \SpecialChar LaTeX
+,
+ there is no need to explain here what the preamble is good for.
+ If you don't,
+ the following will give you some ideas—
+we recommend again that you consult a \SpecialChar LaTeX
book for further information.
- In any case, you should read the points below, because they explain what
- you can do and what you don't need to do in the \SpecialChar LaTeX
+ In any case,
+ you should read the points below,
+ because they explain what you can do and what you don't need to do in the \SpecialChar LaTeX
preamble of a \SpecialChar LyX
document.
\end_layout
\begin_layout Standard
The \SpecialChar LaTeX
- preamble comes at the very beginning of a document,
+ preamble comes at the very beginning of a document,
+
\emph on
before
\emph default
\SpecialChar LyX
already does this for you.
If you're a seasoned \SpecialChar LaTeX
--nician, and you have a custom document class you
- want to use, check out the
+-nician,
+ and you have a custom document class you want to use,
+ check out the
\emph on
Customization Manual
\emph default
\end_inset
\SpecialChar LaTeX
- packages provide special commands, which are only available within a document
- when the package has been declared in the preamble.
- In addition to providing special commands, the inclusion of a package can
- change the document.
- For example, the package
+ packages provide special commands,
+ which are only available within a document when the package has been declared in the preamble.
+ In addition to providing special commands,
+ the inclusion of a package can change the document.
+ For example,
+ the package
\begin_inset Flex Code
status collapsed
\end_inset
forces all paragraphs to be indented.
- There are other packages for labels, envelopes, margins, etc.
+ There are other packages for labels,
+ envelopes,
+ margins,
+ etc.
\end_layout
\begin_layout Itemize
-Set counters, variables, lengths and widths.
+Set counters,
+ variables,
+ lengths and widths.
\begin_inset Newline newline
\end_inset
must
\emph default
be set globally from within the preamble in order to have the desired effect.
- (There are variables that you can set and reset inside the document, too.)
- Margins are a good example of something that must be set in the preamble.
+ (There are variables that you can set and reset inside the document,
+ too.) Margins are a good example of something that must be set in the preamble.
Another example is the label format for lists.
- You can actually set these just about anywhere, but it's best to do it
- just once, inside the preamble.
+ You can actually set these just about anywhere,
+ but it's best to do it just once,
+ inside the preamble.
\end_layout
\begin_layout Itemize
These are abbreviations for \SpecialChar LaTeX
commands which appear very often inside a document.
- Although the preamble is a good place to declare such commands, they
+ Although the preamble is a good place to declare such commands,
+ they
\emph on
can
\emph default
- be declared anywhere (before they are used for the first time, of course).
+ be declared anywhere (before they are used for the first time,
+ of course).
This can be useful if there is a lot of raw \SpecialChar LaTeX
- code in your document, which
- normally should not be the case.
+ code in your document,
+ which normally should not be the case.
\end_layout
\begin_layout Standard
\begin_layout Standard
The commands which \SpecialChar LyX
adds to the preamble of a \SpecialChar LaTeX
- file are fixed; you can't
- change them without patching \SpecialChar LyX
+ file are fixed;
+ you can't change them without patching \SpecialChar LyX
itself.
- You can, however, add your own stuff to the preamble by selecting
+ You can,
+ however,
+ add your own stuff to the preamble by selecting
\begin_inset Flex Noun
status collapsed
\end_inset
dialog to its own built-in preamble.
- Before adding your own declarations in the preamble, you should make sure
- that \SpecialChar LyX
+ Before adding your own declarations in the preamble,
+ you should make sure that \SpecialChar LyX
doesn't already support what you want to do.
- (Remember what we said about reinventing the wheel?) Also,
+ (Remember what we said about reinventing the wheel?) Also,
+
\emph on
make sure your preamble code is correct
\emph default
.
\SpecialChar LyX
doesn't check it for you.
- If there is an error, you're likely to get an error like
+ If there is an error,
+ you're likely to get an error like
\begin_inset Quotes eld
\end_inset
\end_inset
.
- If you see this error, check your preamble.
+ If you see this error,
+ check your preamble.
\end_layout
\begin_layout Subsection
\end_layout
\begin_layout Standard
-Here are some examples of what you can add to a preamble, and what they
- do.
+Here are some examples of what you can add to a preamble,
+ and what they do.
\end_layout
\begin_layout Subsubsection
-Example #1: Offsets
+Example #1:
+ Offsets
\end_layout
\begin_layout Standard
There are two variables under \SpecialChar LaTeX
- that control page position:
+ that control page position:
+
\begin_inset Flex Code
status collapsed
.
Their names should be self-explanatory.
These variables are useful if you think for a moment about computer labels.
- Sometimes, the size of a print medium and the area of the medium that you
- can actually print on aren't the same.
+ Sometimes,
+ the size of a print medium and the area of the medium that you can actually print on aren't the same.
This is where
\begin_inset Flex Code
status collapsed
\begin_inset space \thinspace{}
\end_inset
-points, i.
+points,
+ i.
\begin_inset space \thinspace{}
\end_inset
\end_inset
the page isn't shifted.
- Unfortunately, some DVI drivers always seem to shift the page.
- We have no idea why, or why the sysadmin hasn't fixed such behavior.
+ Unfortunately,
+ some DVI drivers always seem to shift the page.
+ We have no idea why,
+ or why the sysadmin hasn't fixed such behavior.
If you're using \SpecialChar LyX
- on a system that you don't personally maintain, and your
- sysadmin is a doofus,
+ on a system that you don't personally maintain,
+ and your sysadmin is a doofus,
+
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Subsubsection
-Example #2: Labels
+Example #2:
+ Labels
\end_layout
\begin_layout Standard
-Speaking of labels, suppose you wanted to print out a bunch of address labels.
- There's a rather nice package, available at your nearest CTAN archive,
- for printing sheets of labels:
+Speaking of labels,
+ suppose you wanted to print out a bunch of address labels.
+ There's a rather nice package,
+ available at your nearest CTAN archive,
+ for printing sheets of labels:
+
\begin_inset Flex Code
status collapsed
\end_inset
.
- Now, your system may not have this package installed by default.
+ Now,
+ your system may not have this package installed by default.
We leave that up to you to check.
- You'll also want to read the documentation for it; we're not going to do
- that for you.
- Since this is an example, however, we'll give you an example of how you
- use this package.
+ You'll also want to read the documentation for it;
+ we're not going to do that for you.
+ Since this is an example,
+ however,
+ we'll give you an example of how you use this package.
\end_layout
\begin_layout Standard
-First, make sure you're using the
+First,
+ make sure you're using the
\begin_inset Flex Code
status collapsed
\end_inset
document class.
- Next, you need to put the following in your preamble:
+ Next,
+ you need to put the following in your preamble:
\end_layout
\begin_layout LyX-Code
\end_layout
\begin_layout Standard
-This sets things up for Avery label sheets, stock #5360.
- You're now ready to print labels, but you'll need to insert \SpecialChar LaTeX
- code, placing
- the commands
+This sets things up for Avery label sheets,
+ stock #5360.
+ You're now ready to print labels,
+ but you'll need to insert \SpecialChar LaTeX
+ code,
+ placing the commands
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-Someday, someone may write a \SpecialChar LyX
+Someday,
+ someone may write a \SpecialChar LyX
layout file to support this package directly.
Maybe that someone is you.
\end_layout
\begin_layout Subsubsection
-Example #3: Paragraph Indentation
+Example #3:
+ Paragraph Indentation
\end_layout
\begin_layout Standard
every
\emph default
paragraph.
- As with all of their other weird quirks, most Americans will whine and
- moan until they can have their way and indent the first line of all paragraphs.
- (Yes, we're joking.
+ As with all of their other weird quirks,
+ most Americans will whine and moan until they can have their way and indent the first line of all paragraphs.
+ (Yes,
+ we're joking.
(We are?)
\emph on
Yeah
\emph default
-, we are.)
+,
+ we are.)
\end_layout
\begin_layout Standard
-Of course, this behavior isn't standard typography.
- In books, you typically only indent the first line of a paragraph
+Of course,
+ this behavior isn't standard typography.
+ In books,
+ you typically only indent the first line of a paragraph
\emph on
if
\emph default
it follows another one.
- The idea behind indenting the first line of a paragraph is to distinguish
- neighboring paragraphs from one another.
- If there is no previous paragraph—for example, if it follows a figure or
- is the first paragraph in a section—then there is no need for indentation.
+ The idea behind indenting the first line of a paragraph is to distinguish neighboring paragraphs from one another.
+ If there is no previous paragraph—
+for example,
+ if it follows a figure or is the first paragraph in a section—
+then there is no need for indentation.
\end_layout
\begin_layout Standard
-If you're a typical American (we're still joking!), though, you don't care
- about such esoteric things; you want your indentation! Add this to the
- preamble:
+If you're a typical American (we're still joking!),
+ though,
+ you don't care about such esoteric things;
+ you want your indentation!
+ Add this to the preamble:
\end_layout
\begin_layout LyX-Code
\begin_layout Standard
If your \SpecialChar TeX
- distribution isn't braindead, you'll have this package, and all
- of your paragraphs will get the indentation the Founding Fathers intended
- they should have.
+ distribution isn't braindead,
+ you'll have this package,
+ and all of your paragraphs will get the indentation the Founding Fathers intended they should have.
\end_layout
\begin_layout Subsubsection
-Example #4: This Document
+Example #4:
+ This Document
\end_layout
\begin_layout Standard
-You can also check out the preamble of this document to get an idea of some
- of the advanced things you can do.
+You can also check out the preamble of this document to get an idea of some of the advanced things you can do.
\end_layout
\begin_layout Section
\begin_layout Standard
When \SpecialChar LyX
calls \SpecialChar LaTeX
-, it tells \SpecialChar LaTeX
+,
+ it tells \SpecialChar LaTeX
to blithely ignore any errors and keep going.
It then uses the logfile from the \SpecialChar LaTeX
run to do a post-mortem.
- After analyzing the logfile, \SpecialChar LyX
+ After analyzing the logfile,
+ \SpecialChar LyX
displays a dialog listing the errors.
Clicking on any one of them will take you to the position in your \SpecialChar LyX
- file
- where the error occurred.
+ file where the error occurred.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-Well, usually.
- Analyzing the logfile is a tough job, and \SpecialChar LyX
- doesn't always go to the right
- line.
+Well,
+ usually.
+ Analyzing the logfile is a tough job,
+ and \SpecialChar LyX
+ doesn't always go to the right line.
There are also cases where \SpecialChar LaTeX
- reports the error on one line, but the actual
- error is earlier.
- This is not unlike forgetting a closing brace in a program: You'll get
- an error, but only later.
+ reports the error on one line,
+ but the actual error is earlier.
+ This is not unlike forgetting a closing brace in a program:
+ You'll get an error,
+ but only later.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Some folks also like to look at the log file directly: It is available from
-
+Some folks also like to look at the log file directly:
+ It is available from
\begin_inset Flex Noun
status collapsed
\begin_inset Newline newline
\end_inset
-Anything beginning with these words is a warning message for the purpose
- of
+Anything beginning with these words is a warning message for the purpose of
\begin_inset Quotes eld
\end_inset
the \SpecialChar LaTeX
code itself.
- You'll get messages like this if you added or changed cross-references
- or bibliography entries, in which case, \SpecialChar LaTeX
- is trying to tell you that you
- need to make another run.
+ You'll get messages like this if you added or changed cross-references or bibliography entries,
+ in which case,
+ \SpecialChar LaTeX
+ is trying to tell you that you need to make another run.
You can by-and-large ignore these.
\end_layout
\begin_inset Newline newline
\end_inset
-Another warning message, this time about fonts which \SpecialChar LaTeX
+Another warning message,
+ this time about fonts which \SpecialChar LaTeX
couldn't find.
- The rest of the message will often say something about a replacement font
- that \SpecialChar LaTeX
+ The rest of the message will often say something about a replacement font that \SpecialChar LaTeX
used.
- You can safely ignore these, too.
+ You can safely ignore these,
+ too.
\end_layout
\begin_layout Itemize
loves
\emph default
to spew these out.
- It seems to generate at least one of these messages for just about any
- document you write.
- They are warnings about lines that were too long and run past the right
- margin.
+ It seems to generate at least one of these messages for just about any document you write.
+ They are warnings about lines that were too long and run past the right margin.
This happens if \SpecialChar LaTeX
- does not find a reasonable way to break the lines (notoriously
- often with typewriter font, since this does not allow for automatic break
- points).
- In many cases, this is unnoticeable in the final output.
- (It can be just a point or two.) Sometimes, however, the lines run rather
- visibly into the margin; something you will not want to have in your final
- print.
+ does not find a reasonable way to break the lines (notoriously often with typewriter font,
+ since this does not allow for automatic break points).
+ In many cases,
+ this is unnoticeable in the final output.
+ (It can be just a point or two.) Sometimes,
+ however,
+ the lines run rather visibly into the margin;
+ something you will not want to have in your final print.
\begin_inset Newline newline
\end_inset
Fonts
\family default
might already improve things a lot.
- Furthermore, \SpecialChar LaTeX
+ Furthermore,
+ \SpecialChar LaTeX
code such as the following in
\family sans
Document\SpecialChar menuseparator
Settings\SpecialChar menuseparator
Preamble
\family default
- usually reduces the overfull lines drastically (we use this in the preamble
- of this document):
+ usually reduces the overfull lines drastically (we use this in the preamble of this document):
\end_layout
\begin_deeper
\end_layout
\begin_layout Standard
-In some cases, however, you eventually have to rewrite the text to get the
- line breaking right.
+In some cases,
+ however,
+ you eventually have to rewrite the text to get the line breaking right.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-For more information, see
+For more information,
+ see
\begin_inset Flex URL
status open
\end_layout
\begin_layout Standard
-In any case, you should check the respective lines, at least for the final
- version of your document.
- Your eyes will tell you if there's a problem with something that's too
- wide.
+In any case,
+ you should check the respective lines,
+ at least for the final version of your document.
+ Your eyes will tell you if there's a problem with something that's too wide.
\begin_inset Foot
status collapsed
\end_inset
-, and then \SpecialChar LaTeX
+,
+ and then \SpecialChar LaTeX
will draw a black box in the margin of lines that are overfull.
\end_layout
Not quite as common as its cousin.
This happens again if \SpecialChar LaTeX
- does not find a reasonable break point and consequently
- generates too loose lines.
- As with the overfull lines, you should check if this is a visible problem.
+ does not find a reasonable break point and consequently generates too loose lines.
+ As with the overfull lines,
+ you should check if this is a visible problem.
\end_layout
\begin_layout Itemize
\end_inset
Warnings about troubles breaking the page.
- Once again, just look at the output.
+ Once again,
+ just look at the output.
Your eyes will tell you where something has gone wrong.
\end_layout
status collapsed
\begin_layout Plain Layout
-LaTeX Error: File
+LaTeX Error:
+ File
\begin_inset Quotes els
\end_inset
\end_inset
- command, then one of the packages \SpecialChar LyX
+ command,
+ then one of the packages \SpecialChar LyX
tried to load is missing.
Use
\begin_inset Flex Noun
\end_inset
- command and the package in question isn't installed, then you'll need to
- install it yourself.
+ command and the package in question isn't installed,
+ then you'll need to install it yourself.
\end_layout
\begin_layout Itemize
status collapsed
\begin_layout Plain Layout
-LaTeX Error: Unknown option
+LaTeX Error:
+ Unknown option
\end_layout
\end_inset
\begin_inset Newline newline
\end_inset
-Error messages beginning with this are trying to tell you that you specified
- a bad or undefined option to a package.
+Error messages beginning with this are trying to tell you that you specified a bad or undefined option to a package.
Check the package's documentation.
\end_layout
\end_inset
If you've inserted \SpecialChar LaTeX
- code into your document, but made a typo, you'll get
- one of these.
+ code into your document,
+ but made a typo,
+ you'll get one of these.
You may have forgotten to load a package.
- In any case, this error message usually means that you used an undefined
- command.
+ In any case,
+ this error message usually means that you used an undefined command.
\end_layout
messages.
Others are downright cryptic.
These are usually \SpecialChar TeX
- error messages, and we really have
+ error messages,
+ and we really have
\emph on
no clue
\emph default
\end_layout
\begin_layout Enumerate
-If there are no typos, check that you used the command(s) correctly.
+If there are no typos,
+ check that you used the command(s) correctly.
\end_layout
\begin_layout Enumerate
-If you get a bunch of error boxes piled up at the very top of the document—and
- especially if you see a
+If you get a bunch of error boxes piled up at the very top of the document—
+and especially if you see a
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- error—it means that there are errors in the preamble.
+ error—
+it means that there are errors in the preamble.
Start debugging your preamble.
\end_layout
\begin_layout Enumerate
If you didn't add anything to the preamble and didn't add any \SpecialChar LaTeX
- code to the
- document, the first suspect is your \SpecialChar LaTeX
+ code to the document,
+ the first suspect is your \SpecialChar LaTeX
distribution itself.
Check for missing packages and install them.
\end_layout
\begin_layout Enumerate
-Okay, so there are no missing packages.
+Okay,
+ so there are no missing packages.
Did you use any of the fine-tuning options in \SpecialChar LyX
-? Specifically, did you
+?
+ Specifically,
+ did you
\emph on
misuse
\emph default
- any of them, like trying to manually insert lots of
+ any of them,
+ like trying to manually insert lots of
\begin_inset Flex Code
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-, or
+,
+ or
\begin_inset Flex Code
status collapsed
\end_inset
-? Did you try to kludge something together with these instead of using the
- appropriate paragraph environment?
+?
+ Did you try to kludge something together with these instead of using the appropriate paragraph environment?
\end_layout
\begin_layout Enumerate
-All right, you didn't use any of the fine-tuning options, you played by
- the rules.
- Did you try to pull a fancy maneuver? Did you do something funky inside
- a table or an equation, like inserting a graphic into a table cell?
+All right,
+ you didn't use any of the fine-tuning options,
+ you played by the rules.
+ Did you try to pull a fancy maneuver?
+ Did you do something funky inside a table or an equation,
+ like inserting a graphic into a table cell?
\end_layout
\begin_layout Enumerate
Do you have long sections of text where \SpecialChar LaTeX
- cannot find a place to break a
- line? By default, \SpecialChar LaTeX
- is rather strict about how much extra inter-word spacing
- it will add in order to break a line.
- Preferably, you should rework the paragraph to avoid the problem.
+ cannot find a place to break a line?
+ By default,
+ \SpecialChar LaTeX
+ is rather strict about how much extra inter-word spacing it will add in order to break a line.
+ Preferably,
+ you should rework the paragraph to avoid the problem.
\end_layout
\begin_layout Enumerate
-Did you go overboard with the nesting? \SpecialChar LyX
- (currently) doesn't check to make
- sure you're in the limits for nesting environments.
+Did you go overboard with the nesting?
+ \SpecialChar LyX
+ (currently) doesn't check to make sure you're in the limits for nesting environments.
If you nested a bunch of environments to the
\begin_inset Formula $17^{\mathrm{th}}$
\end_inset
- level, that's the problem.
+ level,
+ that's the problem.
(The limit in \SpecialChar LaTeX
is five.)
\end_layout
\begin_layout Enumerate
-Okay, you didn't get any error messages, but your output looks awful.
- If you have a table or figure that's too wide or long for the page, you
- need to:
+Okay,
+ you didn't get any error messages,
+ but your output looks awful.
+ If you have a table or figure that's too wide or long for the page,
+ you need to:
\end_layout
\begin_deeper
\end_deeper
\begin_layout Enumerate
-If something else is wrong with the output, and you didn't try to pull anything
- fancy or kludge the fine-tuning options, we're not sure what's wrong.
+If something else is wrong with the output,
+ and you didn't try to pull anything fancy or kludge the fine-tuning options,
+ we're not sure what's wrong.
\end_layout
\begin_layout Standard
-If all this doesn't help—well, then
+If all this doesn't help—
+well,
+ then
\emph on
perhaps
\emph default
\emph on
User's Guide
\emph default
-, \SpecialChar LaTeX
- originally offered four standard document classes, article, report, book
- and letter, but individuals and organizations, most notably the American
- Mathematical Society in the early days, have made many contributions to
- extending the range of document classes.
- In this chapter we summarize the main externally maintained classes, some
- of which are marked “Unavailable:” in the pull-down
+,
+ \SpecialChar LaTeX
+ originally offered four standard document classes,
+ article,
+ report,
+ book and letter,
+ but individuals and organizations,
+ most notably the American Mathematical Society in the early days,
+ have made many contributions to extending the range of document classes.
+ In this chapter we summarize the main externally maintained classes,
+ some of which are marked “Unavailable:” in the pull-down
\family sans
Document
\begin_inset space ~
\family sans
book (AMS)
\family default
- are maintained by the Society; use of their features is described in the
- Math manual and on their website
+ are maintained by the Society;
+ use of their features is described in the Math manual and on their website
\begin_inset Flex URL
status collapsed
\noun on
David Johnson
\noun default
-; updated by
+;
+ updated by
\noun on
Richard Kimberly Heck
\change_unchanged
\begin_layout Standard
\noindent
The AMS \SpecialChar LaTeX
- layouts are set up to conform to suggested styles for mathematical
- papers to be submitted to American Mathematical Society publications.
- The layouts are not tailored to a specific journal, but easily can be.
- You should refer to the AMS documentation for specific instructions for
- each journal (usually it will entail only changing a single line in the
- \SpecialChar TeX
+ layouts are set up to conform to suggested styles for mathematical papers to be submitted to American Mathematical Society publications.
+ The layouts are not tailored to a specific journal,
+ but easily can be.
+ You should refer to the AMS documentation for specific instructions for each journal (usually it will entail only changing a single line in the \SpecialChar TeX
output).
That documentation is available on the Web at
\begin_inset Flex URL
\end_inset
.
- These layouts are appropriate, and useful, for any mathematical writing.
+ These layouts are appropriate,
+ and useful,
+ for any mathematical writing.
\end_layout
\begin_layout Standard
There are two basic AMS \SpecialChar LaTeX
- layouts:
+ layouts:
+
\end_layout
\begin_layout Itemize
-amsart: The standard AMS article format
+amsart:
+ The standard AMS article format
\change_inserted 564990737 1672345333
\lang american
-; see
+;
+ see
\family sans
File\SpecialChar menuseparator
Open Example\SpecialChar menuseparator
\end_layout
\begin_layout Itemize
-amsbook: the standard AMS book (really, monograph) format
+amsbook:
+ the standard AMS book (really,
+ monograph) format
\change_inserted 564990737 1672345366
\lang american
-; see
+;
+ see
\family sans
File\SpecialChar menuseparator
Open Example\SpecialChar menuseparator
\lang american
amsproc
\family default
-: the standard AMS proceedings format.
+:
+ the standard AMS proceedings format.
\end_layout
\begin_layout Standard
\lang american
\SpecialChar LyX
- only supports the first two natively; see the
+ only supports the first two natively;
+ see the
\emph on
Installing New Document Classes
\emph default
\end_layout
\begin_layout Standard
-The layouts themselves contain only the minimum necessary to use the AMS
- classes.
- They do not, in particular, contain any of the `theorem' environments used
- for setting theorems, lemmas, and the like.
- These are contained, instead, in the
+The layouts themselves contain only the minimum necessary to use the AMS classes.
+ They do not,
+ in particular,
+ contain any of the `theorem' environments used for setting theorems,
+ lemmas,
+ and the like.
+ These are contained,
+ instead,
+ in the
\change_deleted 564990737 1672345416
\begin_inset Flex Code
\family default
\lang english
- module, which is loaded by default when you select one of the AMS classes.
- (It can also be used with other classes and can be removed, if you would
- rather use something else.) Less commonly used environments are in the
+ module,
+ which is loaded by default when you select one of the AMS classes.
+ (It can also be used with other classes and can be removed,
+ if you would rather use something else.) Less commonly used environments are in the
\change_deleted 564990737 1672345436
\begin_inset Flex Code
\family default
\lang english
- module, which must be loaded manually.
+ module,
+ which must be loaded manually.
\end_layout
\begin_layout Standard
-By default, theorems and the like are numbered consecutively throughout
- the document, but this may be modified by loading the module
+By default,
+ theorems and the like are numbered consecutively throughout the document,
+ but this may be modified by loading the module
\change_deleted 564990737 1672345461
\begin_inset Flex Code
\family default
\lang english
- or, if you are using
+ or,
+ if you are using
\begin_inset Flex Code
status collapsed
\end_inset
-, the module
+,
+ the module
\change_deleted 564990737 1672345479
\begin_inset Flex Code
\begin_inset Formula $n.m$
\end_inset
-, where the first number refers to the section (or chapter) and the second
- refers to the total number of results so far in that section (or chapter).
+,
+ where the first number refers to the section (or chapter) and the second refers to the total number of results so far in that section (or chapter).
Many environments are also available unnumbered.
These are indicated by an asterisk at the end.
If you happen to want
\emph on
only
\emph default
- unnumbered results, the module
+ unnumbered results,
+ the module
\change_deleted 564990737 1672345498
\begin_inset Flex Code
\family default
\lang english
- module, and the others mentioned, with other classes, such as
+ module,
+ and the others mentioned,
+ with other classes,
+ such as
\begin_inset Flex Code
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-, and so forth.
+,
+ and so forth.
\end_layout
\begin_layout Subsubsection
\begin_layout Standard
There is a long list of included environments provided by these layouts.
In AMS-\SpecialChar LaTeX
-, there is, in fact, an opportunity to define an unlimited variety
- of `theorem' environments.
- However, the AMS recommends the environments that are available in \SpecialChar LyX
+,
+ there is,
+ in fact,
+ an opportunity to define an unlimited variety of `theorem' environments.
+ However,
+ the AMS recommends the environments that are available in \SpecialChar LyX
.
\end_layout
\begin_layout Standard
-The following environments—as well as the standard environments, such as
-
+The following environments—
+as well as the standard environments,
+ such as
\begin_inset Flex Noun
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Noun
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Noun
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Noun
status collapsed
\end_inset
-, and
+,
+ and
\begin_inset Flex Noun
status collapsed
\end_inset
-—are provided by
+—
+are provided by
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Description
-URL Author's Web address, if desired.
+URL Author's Web address,
+ if desired.
\end_layout
\begin_layout Description
-Keywords Key words or phrases used to identify specific topics discussed
- in the paper.
+Keywords Key words or phrases used to identify specific topics discussed in the paper.
\end_layout
\begin_layout Description
-Subjectclass These refer to the AMS Subject Classifications, published and
- described in
+Subjectclass These refer to the AMS Subject Classifications,
+ published and described in
\emph on
Mathematical Reviews
\emph default
\family default
\lang english
- modules, in the latter case in both starred (unnumbered) and unstarred
- (numbered) versions.
- These same environments are provided only in the starred versions by the
-
+ modules,
+ in the latter case in both starred (unnumbered) and unstarred (numbered) versions.
+ These same environments are provided only in the starred versions by the
\change_deleted 564990737 1672345596
\begin_inset Flex Code
\end_layout
\begin_layout Corollary*
-This is used for statements which follow fairly directly from previous statement
-s.
- Again, these can be major results.
+This is used for statements which follow fairly directly from previous statements.
+ Again,
+ these can be major results.
\end_layout
\end_layout
\begin_layout Proposition
-These are less major results which (hopefully) add to the general theory
- being discussed.
+These are less major results which (hopefully) add to the general theory being discussed.
\end_layout
\begin_layout Conjecture
-These are statements provided without justification, which the author does
- not know how to prove, but which seem to be true (to the author, at least).
+These are statements provided without justification,
+ which the author does not know how to prove,
+ but which seem to be true (to the author,
+ at least).
\end_layout
\begin_layout Definition*
\end_layout
\begin_layout Remark
-This environment is also a type of theorem, usually a lesser sort of observation.
+This environment is also a type of theorem,
+ usually a lesser sort of observation.
\end_layout
\begin_layout Claim*
\end_layout
\begin_layout Case
-Generally, these are used to break up long arguments, using specific instances
- of some condition.
+Generally,
+ these are used to break up long arguments,
+ using specific instances of some condition.
\end_layout
\begin_layout Case
-The numbering scheme for cases is on its own, not together with other numbered
- statements.
+The numbering scheme for cases is on its own,
+ not together with other numbered statements.
\end_layout
\begin_layout Proof
-At the end of this environment, a QED symbol (usually a square, but it can
- vary with different styles) is placed.
- If you want to have other environments within this one—for example, Case
- environments—and have the QED symbol appear only after them, then the other
- environments need to be nested within the proof environment.
+At the end of this environment,
+ a QED symbol (usually a square,
+ but it can vary with different styles) is placed.
+ If you want to have other environments within this one—
+for example,
+ Case environments—
+and have the QED symbol appear only after them,
+ then the other environments need to be nested within the proof environment.
See the section
\emph on
Nesting Environments
\begin_layout Fact
\change_inserted 564990737 1672345651
-Used in a way similar to Proposition, though perhaps lower on the scale.
+Used in a way similar to Proposition,
+ though perhaps lower on the scale.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Condition*
-Sometimes used to state a condition assumed within the present context of
- discussion.
+Sometimes used to state a condition assumed within the present context of discussion.
\end_layout
\begin_layout Note*
\end_layout
\begin_layout Notation*
-Used for the explanation of, yes, notation.
+Used for the explanation of,
+ yes,
+ notation.
\end_layout
\begin_layout Summary
-Do we really need to tell you?
+Do we really need to tell you?
+
\end_layout
\begin_layout Acknowledgement*
\begin_layout Fact
\change_deleted 564990737 1672345638
-Used in a way similar to Proposition, though perhaps lower on the scale.
+Used in a way similar to Proposition,
+ though perhaps lower on the scale.
\change_inserted 564990737 1672345720
\end_layout
\change_inserted 564990737 1672345721
\lang american
-There are ten more Maths modules available including several offering options
- ordered on
+There are ten more Maths modules available including several offering options ordered on
\family sans
(Numbered by Type \SpecialChar ldots
)
\end_layout
\begin_layout Standard
-In addition, the AMS classes automatically provide the AMS \SpecialChar LaTeX
- and AMS fonts
- packages.
+In addition,
+ the AMS classes automatically provide the AMS \SpecialChar LaTeX
+ and AMS fonts packages.
They need to be available on your system in order to use these environments.
\end_layout
(with extra font sizes)
\family default
-,
+,
+
\family sans
book
\begin_inset space \thinspace{}
(with extra font sizes)
\family default
-,
+,
+
\family sans
letter
\begin_inset space \thinspace{}
\family typewriter
article.cls
\family default
-,
+,
+
\family typewriter
book.cls
\family default
-,
+,
+
\family typewriter
letter.cls
\family default
Size
\family default
- options 8, 9, 14, 17 and 20 in the
+ options 8,
+ 9,
+ 14,
+ 17 and 20 in the
\family sans
\bar under
D
(Japanese JS Class)
\family default
,
+
\family sans
article
\begin_inset space \thinspace{}
(Japanese Standard Class Vertical Writing)
\family default
-,
+,
+
\family sans
article
\begin_inset space \thinspace{}
(Japanese Standard Class)
\family default
-,
+,
+
\family sans
book
\begin_inset space \thinspace{}
(Japanese JS Class)
\family default
,
+
\family sans
book
\begin_inset space \thinspace{}
(Japanese Standard Class Vertical Writing)
\family default
-,
+,
+
\family sans
book
\begin_inset space \thinspace{}
(Japanese Standard Class)
\family default
-,
+,
+
\family sans
report
\begin_inset space \thinspace{}
\noun on
Bernd Rellermeyer
\noun default
-; updated by
+;
+ updated by
\noun on
Jürgen Spitzmüller
\noun default
\change_inserted 564990737 1672429162
\lang american
-The KOMA-Script collection of document classes is a development of the Script
- classes created by Frank Neukam in the early 1990s; it was formally launched
- with the addition of a letter class in 1994.
- Since then, a second letter class has been added.
- Frank Neukam's classes were inspired by the principles of typography and
- this has been fully integrated into the design of the KOMA-Script classes.
+The KOMA-Script collection of document classes is a development of the Script classes created by Frank Neukam in the early 1990s;
+ it was formally launched with the addition of a letter class in 1994.
+ Since then,
+ a second letter class has been added.
+ Frank Neukam's classes were inspired by the principles of typography and this has been fully integrated into the design of the KOMA-Script classes.
\change_unchanged
\emph on
article (koma-script)
\emph default
-,
+,
+
\emph on
report (koma-script)
\emph default
-,
+,
+
\emph on
book
\emph default
\emph on
(koma-script)
\emph default
-, and
+,
+ and
\emph on
letter
\emph default
\family typewriter
scrartcl.cls
\family default
-,
+,
+
\family typewriter
scrreprt.cls
\family default
-,
+,
+
\family typewriter
scrbook.cls
\family default
-, and
+,
+ and
\family typewriter
scrlettr.cls
\family default
-, resp.
+,
+ resp.
\begin_inset space ~
\end_inset
\family typewriter
article.cls
\family default
-,
+,
+
\family typewriter
report.cls
\family default
-,
+,
+
\family typewriter
book.cls
\family default
\family typewriter
letter.cls
\family default
-, resp., and fit better to European typography conventions in a number of
- points.
+,
+ resp.,
+ and fit better to European typography conventions in a number of points.
\end_layout
\begin_layout Itemize
\emph on
article (koma-script)
\emph default
-,
+,
+
\emph on
report (koma-script)
\emph default
-, and
+,
+ and
\emph on
book (koma-script)
\change_deleted 564990737 1672429267
\emph default
,
+
\change_unchanged
and 12pt in
\emph on
\end_layout
\begin_layout Itemize
-Headings, labels of the description environment, and a number of elements
- of the
+Headings,
+ labels of the description environment,
+ and a number of elements of the
\emph on
letter (koma-script)
\emph default
status collapsed
\begin_layout Plain Layout
-There is a big difference between the bold sans serif old cm fonts and new
- ec fonts, especially in the appearance of headings.
- In comparison, the ec bold sans serif fonts look a bit thin.
+There is a big difference between the bold sans serif old cm fonts and new ec fonts,
+ especially in the appearance of headings.
+ In comparison,
+ the ec bold sans serif fonts look a bit thin.
Here the \SpecialChar LaTeX
package
\family typewriter
\end_inset
- The numbering of chapter headings is made in the same way as the numbering
- of section headings, that is without the extra line
+ The numbering of chapter headings is made in the same way as the numbering of section headings,
+ that is without the extra line
\begin_inset Quotes eld
\end_inset
\end_inset
.
- In addition, the appearance of the headings can be modified by using a
- number of options (in \SpecialChar LyX
+ In addition,
+ the appearance of the headings can be modified by using a number of options (in \SpecialChar LyX
to be entered in the field
\family sans
Extra
\begin_layout Itemize
\change_deleted 564990737 1672429310
-The main means in the Koma-Script document classes to design the type area
- are the options
+The main means in the Koma-Script document classes to design the type area are the options
\family sans
BCOR
\family default
Settings
\family default
).
- They make a clearer modification of page margins possible as do the options
- of the dialog
+ They make a clearer modification of page margins possible as do the options of the dialog
\family sans
Document\SpecialChar menuseparator
Settings
\change_inserted 564990737 1672429310
\lang american
-The layout of a KOMA-Script page follows one of two traditional typesetting
- conventions based on dividing the page into strips or drawing a circle.
- The default is to imagine that a page is divided horizontally and vertically
- into strips and allocate strips to the margins leaving the unused strips
- for the text area.
- You can change the sizes of the margins by changing the factor by which
- the page is divided into strips; the default for an A4 page is 9 and increasing
- this factor will produce increasingly narrower strips and therefore narrower
- margins.
+The layout of a KOMA-Script page follows one of two traditional typesetting conventions based on dividing the page into strips or drawing a circle.
+ The default is to imagine that a page is divided horizontally and vertically into strips and allocate strips to the margins leaving the unused strips for the text area.
+ You can change the sizes of the margins by changing the factor by which the page is divided into strips;
+ the default for an A4 page is 9 and increasing this factor will produce increasingly narrower strips and therefore narrower margins.
\end_layout
\change_inserted 564990737 1672429310
\lang american
-Whatever the factor, two strips are allocated to the outer and bottom margins
- of a two-sided document and one strip to the inner and top margins, leaving
- a text area occupying around half the page.
- Since most two-sided documents have a binding, this can make the inner
- margins appear too narrow; so you can apply a binding correction to the
- page which is deducted before the size of the strips is calculated.
+Whatever the factor,
+ two strips are allocated to the outer and bottom margins of a two-sided document and one strip to the inner and top margins,
+ leaving a text area occupying around half the page.
+ Since most two-sided documents have a binding,
+ this can make the inner margins appear too narrow;
+ so you can apply a binding correction to the page which is deducted before the size of the strips is calculated.
\end_layout
\change_inserted 564990737 1672429310
\lang american
-The main means in the Koma-Script document classes to design the type area
- are the options
+The main means in the Koma-Script document classes to design the type area are the options
\family sans
BCOR
\family default
\change_inserted 564990737 1672429310
\lang american
-In this document, the binding correction is 7.5mm which is added in the form
-
+In this document,
+ the binding correction is 7.5mm which is added in the form
\family typewriter
BCOR7.5mm
\family default
om
\family default
dialog.
- To change the factor to 11, for example, add the entry
+ To change the factor to 11,
+ for example,
+ add the entry
\family typewriter
DIV=11
\family default
options
\family default
.
- If you want the default value of this factor for a page size other than
- A4, add the entry
+ If you want the default value of this factor for a page size other than A4,
+ add the entry
\family typewriter
DIV=calc
\family default
\change_inserted 564990737 1672429310
\lang american
-To use the circle method of calculating the page layout, use
+To use the circle method of calculating the page layout,
+ use
\family typewriter
DIV=classic
\family default
\end_deeper
\begin_layout Itemize
The \SpecialChar LaTeX
- document classes of the Koma-Script family define a number of additional
- commands.
+ document classes of the Koma-Script family define a number of additional commands.
Those part of it which makes sense in \SpecialChar LyX
- is implemented in corresponding
- paragraph types.
+ is implemented in corresponding paragraph types.
\end_layout
\begin_layout Standard
Detailed descriptions of the \SpecialChar LaTeX
- document classes of the Koma-Script family
- can be found in the Koma-Script documentation
+ document classes of the Koma-Script family can be found in the Koma-Script documentation
\emph on
scrguide
\emph default
\series default
-article (KOMA-Script), report (KOMA-Script), and book (KOMA-Script)
+article (KOMA-Script),
+ report (KOMA-Script),
+ and book (KOMA-Script)
\change_deleted 564990737 1672429367
\lang english
-article (koma-script), report (koma-script), and book (koma-script)
+article (koma-script),
+ report (koma-script),
+ and book (koma-script)
\change_unchanged
\end_layout
\emph on
article (koma-script)
\emph default
-,
+,
+
\emph on
report (koma-script)
\emph default
-, and
+,
+ and
\emph on
book
\emph default
\family typewriter
scrartcl.layout
\family default
-,
+,
+
\family typewriter
scrreprt.layout
\family default
-, and
+,
+ and
\family typewriter
scrbook.layout
\family default
-, resp.
- They contain all the paragraph types of the corresponding standard document
- classes
+,
+ resp.
+ They contain all the paragraph types of the corresponding standard document classes
\emph on
article
\emph default
-,
+,
+
\emph on
report
\emph default
-, and
+,
+ and
\emph on
book
\emph default
-, resp., partly modified, with the exception of the \SpecialChar LyX
+,
+ resp.,
+ partly modified,
+ with the exception of the \SpecialChar LyX
specific
\family sans
List
\family default
--type, which is replaced by the new
+-type,
+ which is replaced by the new
\family sans
Labeling
\family default
\begin_layout Itemize
\family sans
-Addpart, Addchap
+Addpart,
+ Addchap
\family default
-,
+,
+
\family sans
Addsec
\family default
-: are equivalents to
+:
+ are equivalents to
\family sans
-Part*, Chapter*
+Part*,
+ Chapter*
\family default
and
\family sans
Section*
\family default
-, resp., additionally inserting an entry in the table of contents.
+,
+ resp.,
+ additionally inserting an entry in the table of contents.
\family sans
Addpart
\family sans
Addchap*
\family default
-,
+,
+
\family sans
Addsec*
\family default
-: behave exactly as
+:
+ behave exactly as
\family sans
Addchap
\family default
\family sans
Addsec
\family default
-, resp., additionally clearing running heads.
+,
+ resp.,
+ additionally clearing running heads.
\family sans
Addchap*
\emph on
report (koma-script)
\emph default
-, but since this is identical to
+,
+ but since this is identical to
\family sans
Part*
\family default
-, is has not been implemented in \SpecialChar LyX
+,
+ is has not been implemented in \SpecialChar LyX
.
\end_layout
\family sans
Minisec
\family default
-: generates a heading directly above the following paragraph in the standard
- character size without affecting the structure of the document.
+:
+ generates a heading directly above the following paragraph in the standard character size without affecting the structure of the document.
\end_layout
\begin_layout Itemize
\family sans
Captionbelow
\family default
- are special captions which respect the different space settings needed
- for captions placed above or below an element (if you follow strict typographic
- rules, you might want to place table captions always above the table).
+ are special captions which respect the different space settings needed for captions placed above or below an element (if you follow strict typographic rules,
+ you might want to place table captions always above the table).
You can also use the class option
\family typewriter
tablecaptionsabove
\family default
-, which will switch
+,
+ which will switch
\family sans
caption
\family default
\family sans
Dictum
\family default
-: can be used to set a bonmot, e.
+:
+ can be used to set a bonmot,
+ e.
\begin_inset space \thinspace{}
\end_inset
Author
\family default
-), you can insert the dictum's author there.
+),
+ you can insert the dictum's author there.
Dictum and author are separated by a line.
You need at least Koma-Script version 2.8q to use this.
\end_layout
\begin_layout Standard
-The following types, together with the standard types
+The following types,
+ together with the standard types
\family sans
Title
\family default
-,
+,
+
\family sans
Author
\family default
-, and
+,
+ and
\family sans
Date
\family default
-, form the title area of the document.
+,
+ form the title area of the document.
They must be entered ahead of the first
\begin_inset Quotes eld
\end_inset
\end_inset
- When such a type is used more than once, the latter usage overwrites the
- former one, that means, for every type only the latest usage is valid.
- The order of the different types however has, like
+ When such a type is used more than once,
+ the latter usage overwrites the former one,
+ that means,
+ for every type only the latest usage is valid.
+ The order of the different types however has,
+ like
\family sans
Title
\family default
-,
+,
+
\family sans
Author
\family default
-, and
+,
+ and
\family sans
Date
\family default
-, no effect on the appearance of the produced document.
+,
+ no effect on the appearance of the produced document.
\end_layout
\begin_layout Itemize
\family sans
Subject
\family default
-: produces a centered paragraph above the ordinary title (
+:
+ produces a centered paragraph above the ordinary title (
\family sans
Title
\family default
-,
+,
+
\family sans
Author
\family default
-,
+,
+
\family sans
Date
\family default
\family sans
Publishers
\family default
-: produces a centered paragraph below the ordinary title (
+:
+ produces a centered paragraph below the ordinary title (
\family sans
Title
\family default
-,
+,
+
\family sans
Author
\family default
-,
+,
+
\family sans
Date
\family default
\family sans
Dedication
\family default
-: in
+:
+ in
\emph on
report (koma-script)
\emph default
\emph on
book (koma-script)
\emph default
- produces a centered paragraph on its own page behind the title page, or
- in
+ produces a centered paragraph on its own page behind the title page,
+ or in
\emph on
article (koma-script)
\emph default
\family sans
Title
\family default
-,
+,
+
\family sans
Author
\family default
-,
+,
+
\family sans
Date
\family default
-,
+,
+
\family sans
Publishers
\family default
\family sans
Titlehead
\family default
-: produces a left aligned paragraph above the ordinary title (
+:
+ produces a left aligned paragraph above the ordinary title (
\family sans
Title
\family default
-,
+,
+
\family sans
Author
\family default
-,
+,
+
\family sans
Date
\family default
-,
+,
+
\family sans
Subject
\family default
\family sans
Uppertitleback
\family default
-: produces in a double-sided print in
+:
+ produces in a double-sided print in
\emph on
report (koma-script)
\emph default
\emph on
book (koma-script)
\emph default
- a left-aligned paragraph at the top of the title page`s back or has no
- effect in a single-sided print or in
+ a left-aligned paragraph at the top of the title page`s back or has no effect in a single-sided print or in
\emph on
article (koma-script)
\emph default
\family sans
Lowertitleback
\family default
-: produces in a double-sided print in
+:
+ produces in a double-sided print in
\emph on
report (koma-script)
\emph default
\emph on
book (koma-script)
\emph default
- a left-aligned paragraph at the bottom of the title page`s back or has
- no effect in a single-sided print or in
+ a left-aligned paragraph at the bottom of the title page`s back or has no effect in a single-sided print or in
\emph on
article (koma-script)
\emph default
\family sans
Extratitle
\family default
-: produces a special
+:
+ produces a special
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- page ahead of the actual document containing a paragraph without special
- formatting.
+ page ahead of the actual document containing a paragraph without special formatting.
\end_layout
\begin_layout Standard
class
\family default
- dialog which you can apply to the whole document, among them
+ dialog which you can apply to the whole document,
+ among them
\end_layout
\begin_layout Description
draft=true
\family default
\series default
- which produces a PDF with a small black box at the end any line in which
- a formatting error occurs; the default setting is
+ which produces a PDF with a small black box at the end any line in which a formatting error occurs;
+ the default setting is
\family typewriter
false
\end_layout
\family typewriter
big
\family default
-,
+,
+
\family typewriter
normal
\family default
\family typewriter
small
\family default
-; the first and last adjust the sizes of the headings to take account of
- page sizes where the default values may not be suitable
+;
+ the first and last adjust the sizes of the headings to take account of page sizes where the default values may not be suitable
\end_layout
\begin_layout Description
\family typewriter
auto
\family default
- (the default),
+ (the default),
+
\family typewriter
enddot
\family default
\family typewriter
noenddot
\family default
-; the first leaves it up to KOMA-Script to add periods after chapter, section
- numbers, etc.; the second forces the addition of periods and third suppresses
- them
+;
+ the first leaves it up to KOMA-Script to add periods after chapter,
+ section numbers,
+ etc.;
+ the second forces the addition of periods and third suppresses them
\end_layout
\begin_layout Standard
\change_inserted 564990737 1672429680
\lang american
-It also provides commands to affect the output of the document independently
- of the standard \SpecialChar LaTeX
- commands and packages; for example, if you want your captions
- in bold add
+It also provides commands to affect the output of the document independently of the standard \SpecialChar LaTeX
+ commands and packages;
+ for example,
+ if you want your captions in bold add
\end_layout
\begin_layout Standard
\change_inserted 564990737 1672429680
\lang american
-If you are writing a book, it is normal to have the preliminary pages numbered
- in Roman numerals and the Chapters in this part unnumbered.
- If you use the Chapter* environment, your Foreword and Preface will not
- appear in the Table of Contents; to make them to appear in the Table of
- contents, you need to use Chapter environments and add the \SpecialChar TeX
+If you are writing a book,
+ it is normal to have the preliminary pages numbered in Roman numerals and the Chapters in this part unnumbered.
+ If you use the Chapter* environment,
+ your Foreword and Preface will not appear in the Table of Contents;
+ to make them to appear in the Table of contents,
+ you need to use Chapter environments and add the \SpecialChar TeX
code
\end_layout
\lang american
before the first chapter of the body of the text.
- You may also want to have some unnumbered Chapter environments at the end
- of the book after the Appendices, if any.
+ You may also want to have some unnumbered Chapter environments at the end of the book after the Appendices,
+ if any.
\begin_inset Foot
status open
\end_inset
- If you use the Chapter* environment, they will not appear in the Table
- of Contents; so add the \SpecialChar TeX
+ If you use the Chapter* environment,
+ they will not appear in the Table of Contents;
+ so add the \SpecialChar TeX
code
\end_layout
\lang american
before the first of these headings and use the Chapter environment.
These commands will have no effect on the numbering in \SpecialChar LyX
-, only on the PDF
- output where the headings will be unnumbered and appear in the Table of
- Contents.
+,
+ only on the PDF output where the headings will be unnumbered and appear in the Table of Contents.
\end_layout
\begin_layout Standard
\emph on
article (koma-script)
\emph default
-,
+,
+
\emph on
report (koma-script)
\emph default
-, and
+,
+ and
\emph on
book (koma-script)
\emph default
\begin_layout Description
\change_deleted 564990737 1672429749
-Note: This section discusses the obsolete
+Note:
+ This section discusses the obsolete
\family sans
KOMA-Script-Letter (v.
\begin_inset space ~
1)
\family default
-, which is not even included anymore in recent KOMA releases.
- Please refer to the next section for the current KOMA-Script-Letter class
- (v.
+,
+ which is not even included anymore in recent KOMA releases.
+ Please refer to the next section for the current KOMA-Script-Letter class (v.
\begin_inset space ~
\end_inset
scrlettr.layout
\family default
.
- It contains all the paragraph types of the corresponding standard document
- class
+ It contains all the paragraph types of the corresponding standard document class
\emph on
letter
\emph default
-, partly modified, with the exception of the \SpecialChar LyX
+,
+ partly modified,
+ with the exception of the \SpecialChar LyX
specific types
\family sans
\SpecialChar LyX
\family sans
List
\family default
- type, which is replaced by the new
+ type,
+ which is replaced by the new
\family sans
Labeling
\family default
type.
- In addition, it contains, in contrast to the standard document class, the
- standard types
+ In addition,
+ it contains,
+ in contrast to the standard document class,
+ the standard types
\family sans
\SpecialChar LaTeX
\family default
-,
+,
+
\family sans
Quotation
\family default
-,
+,
+
\family sans
Quote
\family default
-, and
+,
+ and
\family sans
Verse
\family default
.
- Furthermore, there are a number of new letter specific types.
+ Furthermore,
+ there are a number of new letter specific types.
\end_layout
\begin_layout Standard
\change_deleted 564990737 1672429749
-The appearance of the letter produced by this document class can be controlled
- by a number of \SpecialChar LaTeX
- commands, which you can put in the \SpecialChar LaTeX
+The appearance of the letter produced by this document class can be controlled by a number of \SpecialChar LaTeX
+ commands,
+ which you can put in the \SpecialChar LaTeX
preamble.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-For example, the standard appearance of the letter`s heading, consisting
- of name and address, is quite self-willed.
+For example,
+ the standard appearance of the letter`s heading,
+ consisting of name and address,
+ is quite self-willed.
An
\begin_inset Quotes eld
\end_inset
\end_inset
A detailed German description of such \SpecialChar LaTeX
- commands can be found in the Koma-Script
- documentation
+ commands can be found in the Koma-Script documentation
\emph on
scrguide
\emph default
.
- With it, the letter's author can produce his personal letter layout.
+ With it,
+ the letter's author can produce his personal letter layout.
\end_layout
\begin_layout Standard
\family default
define the beginning of the letter and must be used in every letter.
To emphasize them in the \SpecialChar LyX
- document class, they are marked with the letter
-
+ document class,
+ they are marked with the letter
\shape italic
L
\shape default
\shape italic
O
\shape default
-, resp.
+,
+ resp.
\begin_inset space ~
\end_inset
\family sans
Closing
\family default
-,
+,
+
\family sans
PS
\family default
-,
+,
+
\family sans
CC
\family default
-, and
+,
+ and
\family sans
Encl
\family default
- are ordinary paragraph types and can also be used several times in one
- and the same letter.
+ are ordinary paragraph types and can also be used several times in one and the same letter.
\end_layout
\begin_layout Itemize
\family sans
Letter
\family default
-: produces a paragraph for the addressee and implicitly defines the beginning
- of the letter.
+:
+ produces a paragraph for the addressee and implicitly defines the beginning of the letter.
\end_layout
\begin_layout Itemize
\family sans
Opening
\family default
-: produces a paragraph for the form of address and implicitly produces a
- new letter.
+:
+ produces a paragraph for the form of address and implicitly produces a new letter.
\end_layout
\begin_layout Itemize
\family sans
Closing
\family default
-: produces a paragraph for a close.
+:
+ produces a paragraph for a close.
\end_layout
\begin_layout Itemize
\family sans
PS
\family default
-: produces a paragraph for a postscript.
+:
+ produces a paragraph for a postscript.
\end_layout
\begin_layout Itemize
\family sans
CC
\family default
-: produces a paragraph for a distribution list.
+:
+ produces a paragraph for a distribution list.
\end_layout
\begin_layout Itemize
\family sans
Encl
\family default
-: produces a paragraph for enclosures.
+:
+ produces a paragraph for enclosures.
\end_layout
\begin_layout Standard
\family sans
Name
\family default
-,
+,
+
\family sans
Signature
\family default
-,
+,
+
\family sans
Address
\family default
-,
+,
+
\family sans
Telephone
\family default
-,
+,
+
\family sans
Place
\family default
-,
+,
+
\family sans
Backaddress
\family default
-,
+,
+
\family sans
Specialmail
\family default
-,
+,
+
\family sans
Location
\family default
-,
+,
+
\family sans
Title
\family default
-, and
+,
+ and
\family sans
Subject
\family default
- are input types provided with a label to enter information, which will
- be processed by the document class.
+ are input types provided with a label to enter information,
+ which will be processed by the document class.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-It could be seen as a matter of inconsequence, that the types
+It could be seen as a matter of inconsequence,
+ that the types
\family sans
Letter
\family default
Opening
\family default
described above are not such input types as well.
- Because of the special meaning of those types, however, I have implemented
- them as ordinary paragraph types with a one letter mark in the left margin.
- Moreover, it would affect my feeling of symmetry, if the
+ Because of the special meaning of those types,
+ however,
+ I have implemented them as ordinary paragraph types with a one letter mark in the left margin.
+ Moreover,
+ it would affect my feeling of symmetry,
+ if the
\family sans
Opening
\family default
\begin_layout Standard
\change_deleted 564990737 1672429749
-An implementation of these types in a WYSIWYG fashion does not seem to make
- sense, because the real appearance of the produced letter does not only
- depend on the usage of the particular type, but also on other factors.
- For example, a signature entered in the
+An implementation of these types in a WYSIWYG fashion does not seem to make sense,
+ because the real appearance of the produced letter does not only depend on the usage of the particular type,
+ but also on other factors.
+ For example,
+ a signature entered in the
\family sans
Signature
\family default
\family sans
Telephone
\family default
- type will in the standard behavior not appear in the produced letter at
- all.
- The possibility to design the letter`s heading freely is already indicated
- in a footnote above.
+ type will in the standard behavior not appear in the produced letter at all.
+ The possibility to design the letter`s heading freely is already indicated in a footnote above.
\end_layout
\begin_layout Standard
\family sans
Signature
\family default
- type is not used at all, in the standard behavior the value of the
+ type is not used at all,
+ in the standard behavior the value of the
\family sans
Name
\family default
- type is used as signature, whereas if an empty
+ type is used as signature,
+ whereas if an empty
\family sans
Signature
\family default
- type is used, no signature value is defined.
+ type is used,
+ no signature value is defined.
\end_layout
\begin_layout Standard
\change_deleted 564990737 1672429749
-By using the input types it is possible to write a letter template, containing
- filled input types with your personal dates (name, address, etc.) and empty
- input types for other dates you want to enter.
+By using the input types it is possible to write a letter template,
+ containing filled input types with your personal dates (name,
+ address,
+ etc.) and empty input types for other dates you want to enter.
\end_layout
\begin_layout Itemize
\family sans
Name
\family default
-: sender's name, in the standard behavior appears as a centered paragraph
- in small caps in the letter`s heading.
+:
+ sender's name,
+ in the standard behavior appears as a centered paragraph in small caps in the letter`s heading.
\end_layout
\begin_layout Itemize
\family sans
Signature
\family default
-: sender's signature, in the standard behavior appears below the
+:
+ sender's signature,
+ in the standard behavior appears below the
\family sans
Closing
\family default
\family sans
Signature
\family default
- type is used, the value of the
+ type is used,
+ the value of the
\family sans
Name
\family default
\family sans
Address
\family default
-: sender's address, in the standard behavior appears in a centered paragraph
- in the letter`s heading below the sender's name.
+:
+ sender's address,
+ in the standard behavior appears in a centered paragraph in the letter`s heading below the sender's name.
\end_layout
\begin_layout Itemize
\family sans
Telephone
\family default
-: sender's telephone number, in the standard behavior only sets the \SpecialChar LaTeX
- variable
-
+:
+ sender's telephone number,
+ in the standard behavior only sets the \SpecialChar LaTeX
+ variable
\family typewriter
\backslash
\family sans
Place
\family default
-: place of the letter`s making.
+:
+ place of the letter`s making.
\end_layout
\begin_layout Itemize
\family sans
Date
\family default
-: date of the letter`s making.
+:
+ date of the letter`s making.
\family sans
Place
\family sans
Date
\family default
-, in the standard behavior, produce the place and the date in a right-aligned
- line below the addressee's field.
+,
+ in the standard behavior,
+ produce the place and the date in a right-aligned line below the addressee's field.
If an empty
\family sans
Date
\family default
- type is used, neither place nor date appear, independent of the value of
- the
+ type is used,
+ neither place nor date appear,
+ independent of the value of the
\family sans
Place
\family default
\family sans
Date
\family default
- type is used, the date of the letter `s production is used.
+ type is used,
+ the date of the letter `s production is used.
\end_layout
\begin_layout Itemize
\family sans
Backaddress
\family default
-: sender`s back address, in the standard behavior appears above the addressee's
- field in a small sans serif font.
+:
+ sender`s back address,
+ in the standard behavior appears above the addressee's field in a small sans serif font.
\end_layout
\begin_layout Itemize
\family sans
Specialmail
\family default
-: special mail information, in the standard behavior appears underlined
- above the addressee's field below the back address.
+:
+ special mail information,
+ in the standard behavior appears underlined above the addressee's field below the back address.
\end_layout
\begin_layout Itemize
\family sans
Location
\family default
-: additional information, in the standard behavior appears on right side
- below the addressee`s field.
+:
+ additional information,
+ in the standard behavior appears on right side below the addressee`s field.
\end_layout
\begin_layout Itemize
\family sans
Title
\family default
-: the letter's title, in the standard behavior appears in a big, bold, sans
- serif font above the subject.
+:
+ the letter's title,
+ in the standard behavior appears in a big,
+ bold,
+ sans serif font above the subject.
\end_layout
\begin_layout Itemize
\family sans
Subject
\family default
-: the letter's subject, in the standard behavior appears in a bold font
- above the
+:
+ the letter's subject,
+ in the standard behavior appears in a bold font above the
\family sans
Opening
\family default
\family sans
Yourref
\family default
-,
+,
+
\family sans
Yourmail
\family default
-,
+,
+
\family sans
Myref
\family default
-,
+,
+
\family sans
Customer
\family default
-, and
+,
+ and
\family sans
Invoice
\family default
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
\end_inset
.
- For the date field, the value of the
+ For the date field,
+ the value of the
\family sans
Date
\family default
\begin_inset Quotes erd
\end_inset
- is used, the value of the
+ is used,
+ the value of the
\family sans
Place
\family default
- type however does not appear, but only the \SpecialChar LaTeX
+ type however does not appear,
+ but only the \SpecialChar LaTeX
variable
\family typewriter
fromplace
\family default
is set.
- The ordinary output of place and date in a right-aligned line below the
- addressee`s field is suppressed.
- The types are implemented as input types provided with a label and must
- be used ahead of the corresponding
+ The ordinary output of place and date in a right-aligned line below the addressee`s field is suppressed.
+ The types are implemented as input types provided with a label and must be used ahead of the corresponding
\family sans
Opening
\family default
\family sans
Yourref
\family default
-: Your ref.
+:
+ Your ref.
\end_layout
\begin_layout Itemize
\family sans
Yourmail
\family default
-: Your letter of.
+:
+ Your letter of.
\end_layout
\begin_layout Itemize
\family sans
Myref
\family default
-: Our ref.
+:
+ Our ref.
\end_layout
\begin_layout Itemize
\family sans
Customer
\family default
-: Customer no.
+:
+ Customer no.
\end_layout
\begin_layout Itemize
\family sans
Invoice
\family default
-: Invoice no.
+:
+ Invoice no.
\change_unchanged
\end_layout
\begin_layout Subsubsection
\change_deleted 564990737 1672429773
-The new letter class: letter (koma-script v.2)
+The new letter class:
+ letter (koma-script v.2)
\change_inserted 564990737 1672429774
\lang american
\end_inset
-The new letter class: letter (KOMA-Script v.2)
+The new letter class:
+ letter (KOMA-Script v.2)
\change_unchanged
\end_layout
scrlettr
\family default
.
- It has — on the \SpecialChar LaTeX
- side — a completely new interface and is not compatible
- with the old class.
- Therefore, \SpecialChar LyX
- supports both, though it is recommended you use the new class.
+ It has —
+ on the \SpecialChar LaTeX
+ side —
+ a completely new interface and is not compatible with the old class.
+ Therefore,
+ \SpecialChar LyX
+ supports both,
+ though it is recommended you use the new class.
\end_layout
\begin_layout Standard
This class covers the same functionality as
\emph on
letter (koma-script),
+
\emph default
and a few more.
The basic items are
\family sans
Address
\family default
- (receiver's address, same as
+ (receiver's address,
+ same as
\family sans
Letter
\family default
- in the old layout),
+ in the old layout),
+
\family sans
Opening
\family default
-, and
+,
+ and
\family sans
Closing
\family default
\family sans
E-Mail
\family default
-,
+,
+
\family sans
URL
\family default
-,
+,
+
\family sans
Fax
\family default
-,
+,
+
\family sans
Bank
\family default
\end_layout
\begin_layout Standard
-The biggest improvement is, though, that the letter's layout is configurable
- to meet almost any needs.
- This can be done via the preamble or with a special style file (Letter
- Class Option, extension
+The biggest improvement is,
+ though,
+ that the letter's layout is configurable to meet almost any needs.
+ This can be done via the preamble or with a special style file (Letter Class Option,
+ extension
\family typewriter
*.lco
\family default
-), that will be read in as a class option.
+),
+ that will be read in as a class option.
\begin_inset Foot
status collapsed
*.lco
\family default
files.
- There is, for instance, a
+ There is,
+ for instance,
+ a
\family typewriter
DIN.lco
\family default
- file that follows german typesetting rules, or a
+ file that follows german typesetting rules,
+ or a
\family typewriter
KOMAold.lco
\family default
\family typewriter
KOMAold
\family default
-, inserted via the
+,
+ inserted via the
\family sans
Layout\SpecialChar menuseparator
Document\SpecialChar menuseparator
\family default
.
- A detailed description is to be found in the Koma-Script documentation
- (
+ A detailed description is to be found in the Koma-Script documentation (
\emph on
scrguide
\emph default
\begin_layout Standard
Visualizing the Koma-Script document classes in \SpecialChar LyX
-, the \SpecialChar LyX
- internals cause some
- problems.
+,
+ the \SpecialChar LyX
+ internals cause some problems.
\end_layout
\begin_layout Itemize
\family sans
Chapter
\family default
- type appears on a line of its own above the chapter heading instead of
- appearing in the same line ahead of it.
+ type appears on a line of its own above the chapter heading instead of appearing in the same line ahead of it.
The cause for that is the \SpecialChar LyX
internal behavior for the labeltype
\family sans
\end_inset
\SpecialChar LaTeX
- table of contents, but not in the \SpecialChar LyX
+ table of contents,
+ but not in the \SpecialChar LyX
table of contents (
\family sans
Document\SpecialChar menuseparator
\emph on
letter
\emph default
- document class appear in a skip separation mode, not indented.
- This is the standard behavior, no special \SpecialChar LaTeX
+ document class appear in a skip separation mode,
+ not indented.
+ This is the standard behavior,
+ no special \SpecialChar LaTeX
commands are needed for that.
But in the
\family sans
Skip
\family default
value always has the effect that extra \SpecialChar LaTeX
- commands are inserted in the document
- to produce the gap, which is not what is wanted in this case.
+ commands are inserted in the document to produce the gap,
+ which is not what is wanted in this case.
\end_layout
\begin_layout Subsection
collection
\change_deleted 564990737 1670924933
-Article (mwart), book (mwbk) and report (mwrep)
+Article (mwart),
+ book (mwbk) and report (mwrep)
\begin_inset Argument status
status collapsed
\emph on
article (mwart)
\emph default
-,
+,
+
\emph on
report (mwrep)
\emph default
\family typewriter
mwart.cls
\family default
-,
+,
+
\family typewriter
mwrep.cls
\family default
\family typewriter
mwbk.cls
\family default
-, resp.
+,
+ resp.
They are replacements for the standard document classes
\family typewriter
article.cls
\family default
-,
+,
+
\family typewriter
report.cls
\family default
\family typewriter
book.cls
\family default
-, resp., and fit better to Polish typography conventions in a number of points.
+,
+ resp.,
+ and fit better to Polish typography conventions in a number of points.
\end_layout
\end_layout
\begin_layout Itemize
-Unnumbered titles (with star, e.
+Unnumbered titles (with star,
+ e.
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Description
-myheadings custom header, contents headers via commands:
+myheadings custom header,
+ contents headers via commands:
+
\family typewriter
\backslash
\begin_deeper
\begin_layout Description
-rmheadings serif titles — default,
+rmheadings serif titles —
+ default,
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-authortitle on title page first placed is author next title — default,
+authortitle on title page first placed is author next title —
+ default,
\end_layout
\begin_layout Description
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Collections"
+nolink "false"
\end_inset
\noun on
Peter Sütterlin
\noun default
-; updated by the \SpecialChar LyX
+;
+ updated by the \SpecialChar LyX
Team
\end_layout
\lang american
This section describes how \SpecialChar LyX
- can be used to write articles for submission
- to the scientific journal
+ can be used to write articles for submission to the scientific journal
\emph on
Astronomy and Astrophysics
\emph default
\family typewriter
aa.cls
\family default
-; information about it is available at
+;
+ information about it is available at
\begin_inset Flex URL
status collapsed
\change_inserted 564990737 1670794716
\lang american
-A manual comes together with the package and should be consulted before
- installing this document class as described in the
+A manual comes together with the package and should be consulted before installing this document class as described in the
\emph on
Installing New Document Classe
\emph default
\change_inserted 564990737 1670794716
\lang american
-Please note that the publisher of the journal was changed from Springer
- to EDP Sciences starting January 1, 2001.
- That change also involved some slight changes to the style files, namely
- the removal of the thesaurus command.
- If you have an older version installed, please upgrade.
- For information about compatibility with the old (version 4) layout, please
- refer to the comments in
+Please note that the publisher of the journal was changed from Springer to EDP Sciences starting January 1,
+ 2001.
+ That change also involved some slight changes to the style files,
+ namely the removal of the thesaurus command.
+ If you have an older version installed,
+ please upgrade.
+ For information about compatibility with the old (version 4) layout,
+ please refer to the comments in
\family typewriter
\SpecialChar LyX
Dir/layouts/aapaper.layout
\family default
\lang american
.
- If you are not using the template, note the following settings:
+ If you are not using the template,
+ note the following settings:
\end_layout
\begin_layout Itemize
Class
\family default
- dialog (OK, that one was obvious).
+ dialog (OK,
+ that one was obvious).
\end_layout
\begin_layout Itemize
Layout
\family default
- dialog: leave it set to
+ dialog:
+ leave it set to
\family sans
Default
\family default
.
- The whole layout is done by the macros, you shouldn't change anything.
+ The whole layout is done by the macros,
+ you shouldn't change anything.
\end_layout
\begin_layout Subsubsection
\lang american
First thing to enter is the header information.
- It consists of five entries, of which one is optional.
+ It consists of five entries,
+ of which one is optional.
They are
\end_layout
\lang american
Title
\family default
-: [required]
+:
+ [required]
\end_layout
\begin_layout Itemize
\lang american
Subtitle
\family default
-: [optional]
+:
+ [optional]
\end_layout
\begin_layout Itemize
\lang american
Author
\family default
-: [required]
+:
+ [required]
\end_layout
\begin_layout Itemize
\lang american
Institute
\family default
-: [required]
+:
+ [required]
\end_layout
\begin_layout Itemize
\lang american
Date
\family default
-: [required].
+:
+ [required].
Suggested format is
\family typewriter
-Received: <date>; Accepted <date>
+Received:
+ <date>;
+ Accepted <date>
\end_layout
\begin_layout Standard
\change_inserted 564990737 1670794716
\lang american
-Although the order of the single header entries doesn't matter it is advised
- to keep the above sequence, just to get the best optics and meets the layout
- of the real document.
+Although the order of the single header entries doesn't matter it is advised to keep the above sequence,
+ just to get the best optics and meets the layout of the real document.
\end_layout
\begin_layout Standard
\change_inserted 564990737 1670794716
\lang american
-If you want to place footnotes in the header block, e.
+If you want to place footnotes in the header block,
+ e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \space{}
\end_inset
-to state your present address, just use the standard footnote via the menu
-
+to state your present address,
+ just use the standard footnote via the menu
\family sans
\bar under
I
\change_inserted 564990737 1670794716
\lang american
-In addition to these topics, the macros use three additional \SpecialChar LaTeX
- commands that
- have no counterpart in \SpecialChar LyX
+In addition to these topics,
+ the macros use three additional \SpecialChar LaTeX
+ commands that have no counterpart in \SpecialChar LyX
:
\end_layout
\backslash
and
\family default
- to separate different names for more than one author and institute, respectivel
-y.
+ to separate different names for more than one author and institute,
+ respectively.
\end_layout
\begin_layout Itemize
\family sans
Institute
\family default
- field, so you have to put a marker to each author.
+ field,
+ so you have to put a marker to each author.
\end_layout
\begin_layout Itemize
\change_inserted 564990737 1671642374
\lang american
-In all cases, the appropriate command has to be entered as \SpecialChar TeX
+In all cases,
+ the appropriate command has to be entered as \SpecialChar TeX
code in \SpecialChar LyX
.
See the examples in the template and in
\change_inserted 564990737 1670794716
\lang american
-The abstract should immediately follow the header block and must contain
- five tokens:
+The abstract should immediately follow the header block and must contain five tokens:
+
\family typewriter
\backslash
\change_inserted 564990737 1670794716
\lang american
-The A&A paper layout supports the following environments for structuring
- your text:
+The A&A paper layout supports the following environments for structuring your text:
\end_layout
\begin_layout Itemize
layout for \SpecialChar LyX
.
Some have already been mentioned.
- For the sake of completeness, they are listed all together here:
+ For the sake of completeness,
+ they are listed all together here:
\end_layout
\begin_layout Itemize
\change_inserted 564990737 1670794716
\lang american
-If you want to use any of these commands, you have to enter them yourself.
+If you want to use any of these commands,
+ you have to enter them yourself.
\family typewriter
Do not forget to use
\SpecialChar LyX
provides support for the necessary float environments
\family sans
-figure, figure*, table
+figure,
+ figure*,
+ table
\family default
and
\family sans
table*
\family default
-, therefore we won't tell much about it here.
+,
+ therefore we won't tell much about it here.
Refer to the
\emph on
User's
\emph default
.
Just remember that tables should be left-aligned.
- For that, select the table and change the alignment in
+ For that,
+ select the table and change the alignment in
\family sans
\bar under
E
\change_inserted 564990737 1670794716
\lang american
-There is only one special thing: the figures with a caption beside the figure.
- To create such a figure, you have to do the following:
+There is only one special thing:
+ the figures with a caption beside the figure.
+ To create such a figure,
+ you have to do the following:
\end_layout
\begin_layout Enumerate
\change_inserted 564990737 1670794716
\lang american
-Create a wide figure float:
+Create a wide figure float:
+
\family sans
\bar under
I
t\SpecialChar menuseparator
Figure
\family default
-, then, from within the float, use the menu
+,
+ then,
+ from within the float,
+ use the menu
\family sans
\bar under
E
\change_inserted 564990737 1670794716
\lang american
-Position the cursor after the figure and insert a horizontal fill by using
- the menu:
+Position the cursor after the figure and insert a horizontal fill by using the menu:
+
\family sans
\bar under
I
\lang american
Switch to \SpecialChar LaTeX
- mode:
+ mode:
+
\family sans
M-c
\begin_inset space ~
\change_inserted 564990737 1670794716
\lang american
-Position the cursor behind the caption text, switch to \SpecialChar LaTeX
- mode and insert
- the closing brace:
+Position the cursor behind the caption text,
+ switch to \SpecialChar LaTeX
+ mode and insert the closing brace:
+
\family sans
M-c
\begin_inset space ~
\change_inserted 564990737 1671642458
\lang american
-Also, refer to the figures in the file in
+Also,
+ refer to the figures in the file in
\family sans
\lang british
File\SpecialChar menuseparator
\change_inserted 564990737 1670794716
\lang american
-For submission, the paper has to be formatted in a special double-spacing
- layout.
- For this purpose, you have to add the option
+For submission,
+ the paper has to be formatted in a special double-spacing layout.
+ For this purpose,
+ you have to add the option
\family typewriter
referee
\family default
\lang american
was written with \SpecialChar LyX
.
- It is the example paper from the original macro package,
+ It is the example paper from the original macro package,
+
\family typewriter
aa.dem
\family default
\end_inset
-, but translated to \SpecialChar LyX
+,
+ but translated to \SpecialChar LyX
using the older unstructured abstract type.
- Use it for inspiration, and compare the \SpecialChar LaTeX
+ Use it for inspiration,
+ and compare the \SpecialChar LaTeX
code in
\family typewriter
aa.dem
\begin_layout Standard
AAS\SpecialChar TeX
- is a set of macros produced by the American Astronomical Society to
- facilitate electronic manuscript submission to the three journals they
- publish: the Astrophysical Journal (including the Letters and Supplement),
- the Astronomical Journal, and the Publications of the Astronomical Society
- of the Pacific.
+ is a set of macros produced by the American Astronomical Society to facilitate electronic manuscript submission to the three journals they publish:
+ the Astrophysical Journal (including the Letters and Supplement),
+ the Astronomical Journal,
+ and the Publications of the Astronomical Society of the Pacific.
\SpecialChar LyX
- has proven to be an excellent tool for generating these documents, especially
- given its equation, citation, and figure handling capabilities.
+ has proven to be an excellent tool for generating these documents,
+ especially given its equation,
+ citation,
+ and figure handling capabilities.
\SpecialChar LyX
- requires version 5.0 (or higher) of these macros; preferably 6.0, which
- is the version described here, or higher.
+ requires version 5.0 (or higher) of these macros;
+ preferably 6.0,
+ which is the version described here,
+ or higher.
Versions prior to 5.0 are intended for use with \SpecialChar LaTeX
-2.09 and are fundamentally
- incompatible with \SpecialChar LyX
+2.09 and are fundamentally incompatible with \SpecialChar LyX
.
The AAS\SpecialChar TeX
package may be downloaded from the AAS\SpecialChar TeX
\end_layout
\begin_layout Standard
-A complete user guide is contained in that package and you should familiarize
- yourself with it thoroughly before embarking on writing a paper in \SpecialChar LyX
+A complete user guide is contained in that package and you should familiarize yourself with it thoroughly before embarking on writing a paper in \SpecialChar LyX
.
\SpecialChar LyX
will not reduce the need to figure out all the AAS\SpecialChar TeX
- commands, it will only
- reduce the drudgery of typing everything in.
+ commands,
+ it will only reduce the drudgery of typing everything in.
It is your responsibility to ensure that the final exported \SpecialChar LaTeX
- document conforms
- completely to the requirements of the journal to which you are submitting
- your paper.
+ document conforms completely to the requirements of the journal to which you are submitting your paper.
\end_layout
\begin_layout Subsubsection
\change_deleted 564990737 1671617310
\family default
-, enter the new file name, then choose the
+,
+ enter the new file name,
+ then choose the
\family typewriter
aastex6.lyx
\family default
\change_unchanged
.
This will show the most common fields found in a manuscript.
- Simply overwrite the existing text (including the brackets,
+ Simply overwrite the existing text (including the brackets,
+
\family typewriter
<>
\family default
) with the correct information.
Many of the AAS\SpecialChar TeX
- commands and environments can be implemented directly in
- \SpecialChar LyX
-, but some cannot.
- For commands such as these, the \SpecialChar LaTeX
- code must be entered directly and marked
- as such.
+ commands and environments can be implemented directly in \SpecialChar LyX
+,
+ but some cannot.
+ For commands such as these,
+ the \SpecialChar LaTeX
+ code must be entered directly and marked as such.
Such commands are referred to as \SpecialChar TeX
- code, or Evil Red Text.
+ code,
+ or Evil Red Text.
I tried to minimize the amount of \SpecialChar TeX
code needed in an AAS\SpecialChar TeX
document.
\backslash
documentclass
\family default
-}; also remove the
+};
+ also remove the
\family typewriter
\backslash
\backslash
makeatother
\family default
- commands, except for any commands you specifically put into the \SpecialChar LaTeX
- preamble
- (which should appear immediately after the
+ commands,
+ except for any commands you specifically put into the \SpecialChar LaTeX
+ preamble (which should appear immediately after the
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Enumerate
-Reread the journal requirements to make sure your filenames and formats
- are correct.
+Reread the journal requirements to make sure your filenames and formats are correct.
\end_layout
\begin_layout Enumerate
\begin_layout Standard
I will not describe the detailed usage of the individual AAS\SpecialChar TeX
- commands: the
- AAS\SpecialChar TeX
+ commands:
+ the AAS\SpecialChar TeX
User Guide (
\family typewriter
aasguide.tex
\family default
) gives a good description of each.
- Thus it's probably easiest for me to go down the list as found in the guide
- and offer comments where necessary.
+ Thus it's probably easiest for me to go down the list as found in the guide and offer comments where necessary.
So let's begin \SpecialChar ldots
\end_layout
\end_layout
\begin_layout Standard
-Because they work as you might expect, I simply list them and the section
- they are found in:
+Because they work as you might expect,
+ I simply list them and the section they are found in:
+
\family typewriter
\backslash
documentclass
\family default
- (2.1.1),
+ (2.1.1),
+
\family typewriter
\backslash
begin{document}
\family default
- (2.2),
+ (2.2),
+
\family typewriter
\backslash
title
\family default
- (2.3),
+ (2.3),
+
\family typewriter
\backslash
author
\family default
- (2.3),
+ (2.3),
+
\family typewriter
\backslash
affil
\family default
- (2.3),
+ (2.3),
+
\family typewriter
\backslash
abstract
\family default
- (2.4),
+ (2.4),
+
\family typewriter
\backslash
keywords
\family default
- (2.5),
+ (2.5),
+
\family typewriter
\backslash
section
\family default
- (2.7),
+ (2.7),
+
\family typewriter
\backslash
subsection
\family default
- (2.7),
+ (2.7),
+
\family typewriter
\backslash
subsubsection
\family default
- (2.7),
+ (2.7),
+
\family typewriter
\backslash
paragraph
\family default
- (2.7),
+ (2.7),
+
\family typewriter
\backslash
facility
\family default
- (2.10),
+ (2.10),
+
\family typewriter
\backslash
begin{displaymath}
\family default
- (2.12),
+ (2.12),
+
\family typewriter
\backslash
begin{equation}
\family default
- (2.12),
+ (2.12),
+
\family typewriter
\backslash
begin{eqnarray}
\family default
- (2.12),
+ (2.12),
+
\family typewriter
\backslash
begin{mathletters}
\family default
- (2.12),
+ (2.12),
+
\family typewriter
\backslash
begin{thebibliography}
\family default
- (2.13.1),
+ (2.13.1),
+
\family typewriter
\backslash
bibitem
\family default
- (2.13.2), all the cite commands and their variations (2.13.2), the generic
- graphicx figure commands (2.14.1),
+ (2.13.2),
+ all the cite commands and their variations (2.13.2),
+ the generic graphicx figure commands (2.14.1),
+
\family typewriter
\backslash
begin{table}
\family default
- (2.15.4),
+ (2.15.4),
+
\family typewriter
\backslash
begin{tabular}
\family default
- (2.15.4),
+ (2.15.4),
+
\family typewriter
\backslash
caption
\family default
- (2.15.4),
+ (2.15.4),
+
\family typewriter
\backslash
label
\family default
- (2.15.4, amongst other places),
+ (2.15.4,
+ amongst other places),
+
\family typewriter
\backslash
tablerefs
\family default
- (2.15.5),
+ (2.15.5),
+
\family typewriter
\backslash
tablecomments
\family default
- (2.15.5),
+ (2.15.5),
+
\family typewriter
\backslash
url
\family default
- (2.17.4),
+ (2.17.4),
+
\family typewriter
\backslash
\end_layout
\begin_layout Standard
-The following style options also work correctly:
+The following style options also work correctly:
+
\family typewriter
longabstract
\family default
- (2.4),
+ (2.4),
+
\family typewriter
preprint
\family default
- (3.2.1),
+ (3.2.1),
+
\family typewriter
preprint2
\family default
- (3.2.2),
+ (3.2.2),
+
\family typewriter
eqsecnum
\family default
- (3.3),
+ (3.3),
+
\family typewriter
flushrt
\family default
\end_layout
\begin_layout Paragraph
-Things that work, but require more comment
+Things that work,
+ but require more comment
\end_layout
\begin_layout Standard
-The following items work, but require a little more discussion:
+The following items work,
+ but require a little more discussion:
\end_layout
\begin_layout Itemize
-These items are reserved for use by the journal editors, but you can put
- them into the \SpecialChar LaTeX
- preamble if you feel compelled to do so:
+These items are reserved for use by the journal editors,
+ but you can put them into the \SpecialChar LaTeX
+ preamble if you feel compelled to do so:
+
\family typewriter
\backslash
received
\family default
-,
+,
+
\family typewriter
\backslash
revised
\family default
-,
+,
+
\family typewriter
\backslash
accepted
\family default
-,
+,
+
\family typewriter
\backslash
ccc
\family default
-,
+,
+
\family typewriter
\backslash
\begin_layout Itemize
These items may be placed in the \SpecialChar LaTeX
- preamble, and are included as blanks in
- the template file:
+ preamble,
+ and are included as blanks in the template file:
+
\family typewriter
\backslash
slugcomment
\family default
- (2.1.4),
+ (2.1.4),
+
\family typewriter
\backslash
shorttitle
\family default
- (2.1.5),
+ (2.1.5),
+
\family typewriter
\backslash
\begin_inset Quotes erd
\end_inset
-, not in the middle of a paragraph.
+,
+ not in the middle of a paragraph.
Use \SpecialChar TeX
code if you need to embed it.
\end_layout
\begin_inset Quotes erd
\end_inset
-, not in the middle of a paragraph.
+,
+ not in the middle of a paragraph.
Use \SpecialChar TeX
code if you need to embed it.
\end_layout
\backslash
placetable
\family default
- (2.8) – can't insert a cross-reference tag, you must type the tag name by
- hand
+ (2.8) – can't insert a cross-reference tag,
+ you must type the tag name by hand
\end_layout
\begin_layout Itemize
\backslash
figcaption
\family default
- (2.14.2) – you can insert an optional filename argument by placing the cursor
- at the beginning of the text and selecting
+ (2.14.2) – you can insert an optional filename argument by placing the cursor at the beginning of the text and selecting
\family sans
Insert\SpecialChar menuseparator
Short Title
\end_layout
\begin_layout Paragraph
-Things not implemented, use \SpecialChar TeX
+Things not implemented,
+ use \SpecialChar TeX
code
\end_layout
\backslash
eqnum
\family default
- (2.12),
+ (2.12),
+
\family typewriter
\backslash
setcounter{equation}
\family default
- (2.12), Journal name abbreviations (2.13.4),
+ (2.12),
+ Journal name abbreviations (2.13.4),
+
\family typewriter
\backslash
figurenum
\family default
- (2.14.1),
+ (2.14.1),
+
\family typewriter
\backslash
epsscale
\family default
- (2.14.1),
+ (2.14.1),
+
\family typewriter
\backslash
plotone
\family default
- (2.14.1),
+ (2.14.1),
+
\family typewriter
\backslash
plottwo
\family default
- (2.14.1),
+ (2.14.1),
+
\family typewriter
\backslash
tablenum
\family default
- (2.15.4),
+ (2.15.4),
+
\family typewriter
\backslash
tableline
\family default
- (2.15.4, insert it as the first element in the lefthand cell after where
- you want it.
+ (2.15.4,
+ insert it as the first element in the lefthand cell after where you want it.
Don't use any of \SpecialChar LyX
-'s rules in the table),
+'s rules in the table),
+
\family typewriter
\backslash
tablenotemark
\family default
- (2.15.5),
+ (2.15.5),
+
\family typewriter
\backslash
tablenotetext
\family default
- (2.15.5), much of Misc (2.17, except
+ (2.15.5),
+ much of Misc (2.17,
+ except
\family typewriter
\backslash
objectname
\family default
-,
+,
+
\family typewriter
\backslash
dataset
\family default
-,
+,
+
\family typewriter
\backslash
url
\family default
-, and
+,
+ and
\family typewriter
\backslash
email
\family default
-; see above),
+;
+ see above),
+
\family typewriter
\backslash
singlespace
\family default
- (3.1),
+ (3.1),
+
\family typewriter
\backslash
doublespace
\family default
- (3.1),
+ (3.1),
+
\family typewriter
\backslash
onecolumn
\family default
- (3.2),
+ (3.2),
+
\family typewriter
\backslash
\begin_layout Standard
\SpecialChar ldots
- at least in any meaningful sort of way, so I suggest ignoring them.
- They are the references environment (2.13.3), and the deluxetable environment
- (2.15).
- If you really, really need to use deluxetable, I suggest editing it in
- a separate file with a text editor, then using
+ at least in any meaningful sort of way,
+ so I suggest ignoring them.
+ They are the references environment (2.13.3),
+ and the deluxetable environment (2.15).
+ If you really,
+ really need to use deluxetable,
+ I suggest editing it in a separate file with a text editor,
+ then using
\family sans
Insert\SpecialChar menuseparator
Child
\end_layout
\begin_layout Subsubsection
-FAQs, Tips, Tricks, and Other Ruminations
+FAQs,
+ Tips,
+ Tricks,
+ and Other Ruminations
\end_layout
\begin_layout Paragraph
\begin_layout Standard
It can be a bit tricky to get \SpecialChar LyX
to recognize a new layout and document class.
- When all else fails, do this:
+ When all else fails,
+ do this:
\end_layout
\begin_layout Enumerate
can find AAS\SpecialChar TeX
.
Copy sample.tex (and perhaps table.tex) from the AAS\SpecialChar TeX
- distribution into a
- directory completely unrelated to \SpecialChar LaTeX
+ distribution into a directory completely unrelated to \SpecialChar LaTeX
or AAS\SpecialChar TeX
and run \SpecialChar LaTeX
on
Reconfigure
\family default
in \SpecialChar LyX
-, then restart \SpecialChar LyX
+,
+ then restart \SpecialChar LyX
.
\end_layout
\begin_layout Enumerate
-Open a regular new file, not from a template.
+Open a regular new file,
+ not from a template.
Does AAS\SpecialChar TeX
appear in the class list in
\family sans
\begin_layout Standard
If you get a warning from an existing AAS\SpecialChar TeX
- document about not being able
- to find the AAS\SpecialChar TeX
+ document about not being able to find the AAS\SpecialChar TeX
layout or a message about
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, things haven't been installed correctly.
+,
+ things haven't been installed correctly.
\end_layout
\begin_layout Paragraph
\begin_layout Standard
\SpecialChar LyX
-, by default, attempts to center the table caption/title.
+,
+ by default,
+ attempts to center the table caption/title.
This seems to produce a bad interaction in AAS\SpecialChar TeX
- so you should click somewhere
- in the caption/title, then select
+ so you should click somewhere in the caption/title,
+ then select
\family sans
Edit\SpecialChar menuseparator
Paragraph
Settings
\family default
-, then set the
+,
+ then set the
\family sans
Alignment
\family default
\end_layout
\begin_layout Standard
-A couple of things: 1) I have noticed some funny spacing in the reference
- entries in the text.
- When you enter the bibliography item data, make sure their is
+A couple of things:
+ 1) I have noticed some funny spacing in the reference entries in the text.
+ When you enter the bibliography item data,
+ make sure their is
\emph on
no
\emph default
\family typewriter
Ressler(1992)
\family default
-, not
+,
+ not
\family typewriter
Ressler (1992)
\family default
.
2) Entering the references at all is not obvious.
- The easiest thing is to start typing your first reference at the end of
- the document, then mark it as type
+ The easiest thing is to start typing your first reference at the end of the document,
+ then mark it as type
\family sans
References
\family default
.
That will put a small gray box in front of what you just typed.
Click on the box to fill in the rest of the information.
- For new references, go to the end of an existing reference and press return.
- That will create a new line with its own box, etc.
+ For new references,
+ go to the end of an existing reference and press return.
+ That will create a new line with its own box,
+ etc.
\end_layout
\begin_layout Paragraph
\backslash
plotone
\family default
-, for example), I much prefer \SpecialChar LaTeX
-'s standard figure commands (with the default
- graphicx).
+,
+ for example),
+ I much prefer \SpecialChar LaTeX
+'s standard figure commands (with the default graphicx).
You can insert the
\family typewriter
\backslash
plotone
\family default
-, etc.
+,
+ etc.
\begin_inset space ~
\end_inset
commands as \SpecialChar TeX
- code into a Figure Float box if you desire, but I never have
- much luck getting the layout right.
- With the standard graphics, \SpecialChar LyX
+ code into a Figure Float box if you desire,
+ but I never have much luck getting the layout right.
+ With the standard graphics,
+ \SpecialChar LyX
will insert a
\family typewriter
preamble and handle the figures in the standard \SpecialChar LaTeX2e
way,
interspersing the figures in the text.
- I believe ApJ accepts figures exactly this way now; AJ might still use
- the
+ I believe ApJ accepts figures exactly this way now;
+ AJ might still use the
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Paragraph
-Things I could have done, but didn't
+Things I could have done,
+ but didn't
\end_layout
\begin_layout Standard
\begin_inset Quotes erd
\end_inset
- things I could have implemented, but chose not to.
- For instance, I saw no point in double-spacing the text in the \SpecialChar LyX
+ things I could have implemented,
+ but chose not to.
+ For instance,
+ I saw no point in double-spacing the text in the \SpecialChar LyX
window,
even though it is double-spaced in the paper manuscript.
- Also, I chose not to make separate layouts for the preprint and preprint2
- styles.
- Since I assume you will spend most of your time in the plain manuscript
- mode anyway, I decided not to chew up more disk space with this.
+ Also,
+ I chose not to make separate layouts for the preprint and preprint2 styles.
+ Since I assume you will spend most of your time in the plain manuscript mode anyway,
+ I decided not to chew up more disk space with this.
\end_layout
\begin_layout Standard
Your mileage may vary.
- I've now had papers published by both ApJ and AJ that have had 98% of the
- effort done in \SpecialChar LyX
-; the last 2% was the \SpecialChar LaTeX
+ I've now had papers published by both ApJ and AJ that have had 98% of the effort done in \SpecialChar LyX
+;
+ the last 2% was the \SpecialChar LaTeX
post-processing and a few cleanups.
- I have had no trouble with the submission process, and I'm sure the journals
- were never aware that there might be a difference.
- So, go forth and publish!
+ I have had no trouble with the submission process,
+ and I'm sure the journals were never aware that there might be a difference.
+ So,
+ go forth and publish!
\end_layout
\begin_layout Subsection
elsarticle.cls
\family default
document class.
- This provides the following additional environments:
+ This provides the following additional environments:
+
\family sans
Title
\begin_inset space ~
footnote
\family default
-,
+,
+
\family sans
Author
\begin_inset space ~
footnote
\family default
-,
+,
+
\family sans
Corresponding
\begin_inset space ~
author
\family default
-,
+,
+
\family sans
Address
\family default
-,
+,
+
\family sans
Email
\family default
\family default
\lang american
.
- It has been customized with further environments and contains all the informati
-on you may need.
- However, the documentation is also available from
+ It has been customized with further environments and contains all the information you may need.
+ However,
+ the documentation is also available from
\begin_inset CommandInset href
LatexCommand href
name "CTAN"
article.cls
\family default
document class.
- It provides similar functionality, but you might prefer this layout with
- sans serif sections, headings, and more.
+ It provides similar functionality,
+ but you might prefer this layout with sans serif sections,
+ headings,
+ and more.
\end_layout
\begin_layout Subsection
\begin_inset Formula $\beta$
\end_inset
- release of May, 1999) class.
+ release of May,
+ 1999) class.
\end_layout
\begin_layout Standard
\family sans
Revtex
\family default
- textclass, which works with Rev\SpecialChar TeX
+ textclass,
+ which works with Rev\SpecialChar TeX
3.1.
- However, v3.1 is basically obsolete, as it works with \SpecialChar LaTeX
+ However,
+ v3.1 is basically obsolete,
+ as it works with \SpecialChar LaTeX
2.09.
That means that it doesn't interact very well with \SpecialChar LyX
-, which requires \SpecialChar LaTeX2e
-, although
- it has been kludged to work.
+,
+ which requires \SpecialChar LaTeX2e
+,
+ although it has been kludged to work.
Since Rev\SpecialChar TeX
4.0 has been designed to work much more cleanly with \SpecialChar LaTeX2e
-, \SpecialChar LyX
- with the
-
+,
+ \SpecialChar LyX
+ with the
\family sans
Rev\SpecialChar TeX
addition
\emph default
to the Rev\SpecialChar TeX
- 4.0 documents, so we don't describe any of the special Rev\SpecialChar TeX
+ 4.0 documents,
+ so we don't describe any of the special Rev\SpecialChar TeX
macros,
and assume you'll know what to put in the preamble if necessary.
\end_layout
\begin_layout Standard
All you need to do is install Rev\SpecialChar TeX
- 4, as described in the package's README
- file.
+ 4,
+ as described in the package's README file.
The package can be found at The Rev\SpecialChar TeX
4 Web Site
\begin_inset Flex URL
\begin_inset space \space{}
\end_inset
-not the directory where you installed the class file.) Then, if you reconfigure
- \SpecialChar LyX
-, it will find the class file and let you use the Rev\SpecialChar TeX
+not the directory where you installed the class file.) Then,
+ if you reconfigure \SpecialChar LyX
+,
+ it will find the class file and let you use the Rev\SpecialChar TeX
4 textclass.
\end_layout
\begin_layout Standard
Probably the easiest way to get started is either to import a Rev\SpecialChar TeX
- 4 document
- using
+ 4 document using
\family typewriter
tex2lyx
\family default
-, or to use the
+,
+ or to use the
\family sans
Revtex
\begin_inset space ~
4
\family default
- template, found in the templates directory.
+ template,
+ found in the templates directory.
\end_layout
\begin_layout Subsubsection
\backslash
documentclass
\family default
-, like
+,
+ like
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, go in the
+,
+ go in the
\family sans
Extra
\begin_inset space ~
Layout
\family default
- dialog, as usual.
+ dialog,
+ as usual.
Remember that in Rev\SpecialChar TeX
-, at least one optional argument is required!
+,
+ at least one optional argument is required!
+
\end_layout
\begin_layout Standard
-Other preamble matter, like
+Other preamble matter,
+ like
\family typewriter
\backslash
Preamble
\family default
- dialog, also as usual.
+ dialog,
+ also as usual.
\end_layout
\begin_layout Subsubsection
\begin_layout Standard
The layouts basically correspond to the commands in Rev\SpecialChar TeX
4.0.
- For example, the Email layout corresponds to
+ For example,
+ the Email layout corresponds to
\family typewriter
\backslash
\family default
.
Note that (at least as of Rev\SpecialChar TeX
- 4.0 Beta), the
+ 4.0 Beta),
+ the
\family sans
Address
\family default
\family sans
Affiliation
\family default
- layouts are exactly equivalent, so you shouldn't need to use both.
+ layouts are exactly equivalent,
+ so you shouldn't need to use both.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-In case you're curious, both were included so that
+In case you're curious,
+ both were included so that
\family typewriter
tex2lyx
\family default
\begin_layout Standard
There are a couple of important unique aspects of Rev\SpecialChar TeX
- 4 which might cause
- bugs that will be even more confusing in \SpecialChar LyX
+ 4 which might cause bugs that will be even more confusing in \SpecialChar LyX
.
\end_layout
\begin_layout Standard
In Rev\SpecialChar TeX
-, the
+,
+ the
\family typewriter
\backslash
\family sans
Author
\family default
- layout, or weird things may happen.
+ layout,
+ or weird things may happen.
See the Rev\SpecialChar TeX
4 documentation for more details.
\end_layout
\begin_layout Standard
-Also, the
+Also,
+ the
\family sans
Author
\begin_inset space ~
Email
\family default
-,
+,
+
\family sans
Author
\begin_inset space ~
URL
\family default
-, and
+,
+ and
\family sans
Thanks
\family default
\family sans
Address
\family default
-, the \SpecialChar LaTeX
+,
+ the \SpecialChar LaTeX
won't compile.
\end_layout
\family default
.
This package provides a \SpecialChar LaTeX
- class and templates for books to be published
- at Springer Gabler Research, Springer Vieweg Research, Springer Spektrum
- Research, Springer VS Research, or Springer VS Forschung.
+ class and templates for books to be published at Springer Gabler Research,
+ Springer Vieweg Research,
+ Springer Spektrum Research,
+ Springer VS Research,
+ or Springer VS Forschung.
The documentation is available in German from
\begin_inset CommandInset href
LatexCommand href
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Collections"
+nolink "false"
\end_inset
\begin_layout Standard
Memoir is a very powerful and constantly evolving class.
It has been designed with regard to fictional and non-fictional literature.
- Its aim is to let the user have maximum control over the typesetting of
- his document.
- Memoir is based on the standard book class, but it can also emulate the
- article class (see below).
+ Its aim is to let the user have maximum control over the typesetting of his document.
+ Memoir is based on the standard book class,
+ but it can also emulate the article class (see below).
\end_layout
\begin_layout Standard
-Peter Wilson, the developer of Memoir, is known as the author of lots of
- useful packages in the \SpecialChar LaTeX
+Peter Wilson,
+ the developer of Memoir,
+ is known as the author of lots of useful packages in the \SpecialChar LaTeX
world.
Most of them have been merged with Memoir.
- Therefore, it is much easier to layout the table of contents, appendices,
+ Therefore,
+ it is much easier to layout the table of contents,
+ appendices,
chapter designs and such.
\SpecialChar LyX
-, though, does not support all of these goodies natively.
+,
+ though,
+ does not support all of these goodies natively.
Some of them might be added to forthcoming releases
\begin_inset Foot
status collapsed
\end_inset
-, lots will probably never be supported, due to the limitations of \SpecialChar LyX
+,
+ lots will probably never be supported,
+ due to the limitations of \SpecialChar LyX
's framework.
Of course you can still use all features with the help of some native \SpecialChar LaTeX
-
commands (\SpecialChar TeX
code
\begin_inset Foot
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Inserting-TeX-Code"
+nolink "false"
\end_inset
\end_inset
).
- In this section, we can only list those features that are natively supported
- by \SpecialChar LyX
+ In this section,
+ we can only list those features that are natively supported by \SpecialChar LyX
.
- For detailed descriptions (and for the rest of features) we recommend you
- have a look at the detailed manual of the Memoir class
+ For detailed descriptions (and for the rest of features) we recommend you have a look at the detailed manual of the Memoir class
\begin_inset Foot
status collapsed
\end_inset
-, which is not only a user guide for the class, but also both a comprehensive
- description on good typesetting and a superb example for good typesetting
- itself.
+,
+ which is not only a user guide for the class,
+ but also both a comprehensive description on good typesetting and a superb example for good typesetting itself.
\end_layout
\begin_layout Subsubsection
\begin_layout Standard
Memoir supports basically all features of the standard book classes.
- There are, however, some differences, as follows:
+ There are,
+ however,
+ some differences,
+ as follows:
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-sizes: Memoir has a broader range of font sizes: 9, 10, 11, 12, 14, 17
+sizes:
+ Memoir has a broader range of font sizes:
+ 9,
+ 10,
+ 11,
+ 12,
+ 14,
+ 17
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-style: The fancy page style is not supported, due to a command clash between
- Memoir and the fancyhdr package (they both define a command with the same
- name, which confuses \SpecialChar LaTeX
+style:
+ The fancy page style is not supported,
+ due to a command clash between Memoir and the fancyhdr package (they both define a command with the same name,
+ which confuses \SpecialChar LaTeX
).
- Instead, Memoir comes with a number of its own page styles (see
+ Instead,
+ Memoir comes with a number of its own page styles (see
\family sans
Document\SpecialChar menuseparator
Settings\SpecialChar menuseparator
Style
\family default
).
- If you want to use these for the chapter pages, you have to use the command
-
+ If you want to use these for the chapter pages,
+ you have to use the command
\family typewriter
\backslash
\end_layout
\begin_layout Description
-Sectioning: Sectionings (chapter, section, subsection etc.) come with an
- optional argument in the standard classes.
- With this, you can specify an alternative version of the title for the
- table of contents and the headers (for instance, if the title is too long).
+Sectioning:
+ Sectionings (chapter,
+ section,
+ subsection etc.) come with an optional argument in the standard classes.
+ With this,
+ you can specify an alternative version of the title for the table of contents and the headers (for instance,
+ if the title is too long).
In \SpecialChar LyX
-, you can do this via
+,
+ you can do this via
\family sans
Insert\SpecialChar menuseparator
Short
Title
\family default
at the beginning of a chapter/section.
- Memoir features a second optional argument and thus separates the table
- of contents from the header.
- You can define three variants of a title with this: one for the main text,
- one for the table of contents, and one for the headers.
+ Memoir features a second optional argument and thus separates the table of contents from the header.
+ You can define three variants of a title with this:
+ one for the main text,
+ one for the table of contents,
+ and one for the headers.
\SpecialChar LyX
makes these available in form of specific
\family sans
\end_layout
\begin_layout Description
-TOC/LOT/LOF: In the standard classes (and in many other classes), the table
- of contents, the list of figures and the list of table start a new page
- automatically.
+TOC/LOT/LOF:
+ In the standard classes (and in many other classes),
+ the table of contents,
+ the list of figures and the list of table start a new page automatically.
Memoir does not follow this route.
- You have to insert a page break yourself, if you want to have one.
+ You have to insert a page break yourself,
+ if you want to have one.
\end_layout
\begin_layout Description
-Titlepage: For some unknown reason, Memoir uses pagination on the title
- page (in the standard classes, title pages are
+Titlepage:
+ For some unknown reason,
+ Memoir uses pagination on the title page (in the standard classes,
+ title pages are
\begin_inset Quotes eld
\end_inset
\end_inset
).
- If you want an empty title page, type
+ If you want an empty title page,
+ type
\family typewriter
\backslash
\end_layout
\begin_layout Description
-Article: With the class option
+Article:
+ With the class option
\emph on
article
\emph default
Options
\family default
-), you can emulate article style.
- That is, counters (footnotes, figures, tables etc.) will not be reset on
- new chapters, chapters don't start a new page (but are—in contrary to
+),
+ you can emulate article style.
+ That is,
+ counters (footnotes,
+ figures,
+ tables etc.) will not be reset on new chapters,
+ chapters don't start a new page (but are—
+in contrary to
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- article classes—still allowed), parts, though, use their own page, as in
- book.
+ article classes—
+still allowed),
+ parts,
+ though,
+ use their own page,
+ as in book.
\end_layout
\begin_layout Description
-Oldfontcommands: By default, Memoir does not allow the use of the deprecated
- font commands, which have been used in the old \SpecialChar LaTeX
+Oldfontcommands:
+ By default,
+ Memoir does not allow the use of the deprecated font commands,
+ which have been used in the old \SpecialChar LaTeX
version 2.09 (e.
\begin_inset space \thinspace{}
\end_inset
\backslash
rm
\family default
-,
+,
+
\family typewriter
\backslash
\emph on
oldfontcommands
\emph default
- reallows the commands and spits out warnings instead (which does at least
- not stop \SpecialChar LaTeX
+ reallows the commands and spits out warnings instead (which does at least not stop \SpecialChar LaTeX
).
Since a lot of packages and particularly Bib\SpecialChar TeX
- style files are still using
- those commands, we have decided to use this option by default.
+ style files are still using those commands,
+ we have decided to use this option by default.
\end_layout
\begin_layout Subsubsection
\end_layout
\begin_layout Description
-Abstract: You may wonder why an abstract is an extra feature.
- Well, it is in book class.
+Abstract:
+ You may wonder why an abstract is an extra feature.
+ Well,
+ it is in book class.
Usually books don't have abstracts.
- Memoir, however, has.
+ Memoir,
+ however,
+ has.
You can use it wherever and how often you like.
\end_layout
\begin_layout Description
-Chapterprecis: You may know this older typesetting style: The contents of
- a chapter are summarized below the title and also in the table of contents
- (e.
+Chapterprecis:
+ You may know this older typesetting style:
+ The contents of a chapter are summarized below the title and also in the table of contents (e.
\begin_inset space \thinspace{}
\end_inset
\emph on
-Our hero arrives in Troia; he loses some friends; he finds others
+Our hero arrives in Troia;
+ he loses some friends;
+ he finds others
\emph default
).
Chapterprecis does exactly this.
\end_layout
\begin_layout Description
-Epigraph: An epigraph is a smart slogan or motto at the beginning of a chapter.
- The epigraph environment provides an elegant way of typesetting such a
- motto.
- The motto itself (text) and its (optional) author (source) are divided
- by a short line.
+Epigraph:
+ An epigraph is a smart slogan or motto at the beginning of a chapter.
+ The epigraph environment provides an elegant way of typesetting such a motto.
+ The motto itself (text) and its (optional) author (source) are divided by a short line.
The author (source) can be inserted via
\family sans
Insert\SpecialChar menuseparator
\end_layout
\begin_layout Description
-Poemtitle: Memoir has lots of possibilities to typeset poetry (up to very
- complex figurative poems).
+Poemtitle:
+ Memoir has lots of possibilities to typeset poetry (up to very complex figurative poems).
\SpecialChar LyX
can only support a few of them.
- One is poemtitle, which is a centered title for poems, which will also
- be added to the table of contents (verse is the standard environment for
- poems.
- Memoir has some enhanced versions of verse, but you need to use \SpecialChar TeX
+ One is poemtitle,
+ which is a centered title for poems,
+ which will also be added to the table of contents (verse is the standard environment for poems.
+ Memoir has some enhanced versions of verse,
+ but you need to use \SpecialChar TeX
code,
- because they have to be nested inside regular verse environments, which
- is not possible with \SpecialChar LyX
+ because they have to be nested inside regular verse environments,
+ which is not possible with \SpecialChar LyX
).
\end_layout
\begin_layout Description
-Poemtitle*: Same as poemtitle, but it adds no entry to the table of contents.
+Poemtitle*:
+ Same as poemtitle,
+ but it adds no entry to the table of contents.
\end_layout
\begin_layout Subsection
\family typewriter
Subsubsection
\family default
- level which generates a bold centered heading above a double horizontal
- rule
+ level which generates a bold centered heading above a double horizontal rule
\end_layout
\begin_layout Description
Ingredients
\series default
\emph default
- are what are being described and the environment ends with a horizontal
- rule.
+ are what are being described and the environment ends with a horizontal rule.
\end_layout
\begin_layout Standard
\change_inserted 564990737 1671442175
\lang american
-It is designed for typesetting one or two recipes per page, with dimensions
- of 5.5
+It is designed for typesetting one or two recipes per page,
+ with dimensions of 5.5
\begin_inset Quotes qrd
\end_inset
\end_inset
.
- The hyperlinked table of contents (ToC) and page numbers make browsing
- recipes convenient, and the pages can be joined together or printed 2 per
- page to normal letterpaper easily.
- The size was chosen to work in half-page 3-ring binder cover sheets, because
- un-laminated paper just doesn't last in the kitchen.
+ The hyperlinked table of contents (ToC) and page numbers make browsing recipes convenient,
+ and the pages can be joined together or printed 2 per page to normal letterpaper easily.
+ The size was chosen to work in half-page 3-ring binder cover sheets,
+ because un-laminated paper just doesn't last in the kitchen.
\end_layout
\begin_layout Standard
\family typewriter
europasscv.cls
\family default
- document class, an unofficial implementation of the ‘Europass CV’ recommended
- by the European Commission in 2013.
+ document class,
+ an unofficial implementation of the ‘Europass CV’ recommended by the European Commission in 2013.
\family sans
\lang british
\family typewriter
europecv.cls
\family default
- document class, an unofficial implementation of the “Europass CV” recommended
- by the European Commission in 2002.
+ document class,
+ an unofficial implementation of the “Europass CV” recommended by the European Commission in 2002.
\family sans
\lang british
\family typewriter
simplecv.cls
\family default
- document class, originally developed for use with \SpecialChar LyX
+ document class,
+ originally developed for use with \SpecialChar LyX
.
\family sans
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:The-new-letter"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Extra-font-sizes"
+nolink "false"
\end_inset
\family typewriter
lettre.cls
\family default
- document class for writing letters, faxes and envelopes in French.
+ document class for writing letters,
+ faxes and envelopes in French.
The file in the menu
\family sans
\bar under
\noun on
Allan Rae
\noun default
-; updated by the \SpecialChar LyX
+;
+ updated by the \SpecialChar LyX
Team
\end_layout
foils.cls
\family default
document class to make slides for overhead projectors.
- There are two document classes that can do this: the
+ There are two document classes that can do this:
+ the
\family sans
presentations
\begin_inset space \thinspace{}
plural "false"
caps "false"
noprefix "false"
+nolink "false"
\end_inset
(Foil\SpecialChar TeX
)
\family default
- document class installed, you’ll probably have to use the
+ document class installed,
+ you’ll probably have to use the
\family sans
presentations
\begin_inset space \thinspace{}
\family typewriter
foils.cls
\family default
- document class, it is available from
+ document class,
+ it is available from
\begin_inset CommandInset href
LatexCommand href
name "CTAN"
\change_deleted 564990737 1672743383
This section describes how to use \SpecialChar LyX
to make slides for overhead projectors.
- There are two document classes that can do this: the default slides class
- and the
+ There are two document classes that can do this:
+ the default slides class and the
\family sans
Foil\SpecialChar TeX
\begin_layout Standard
\change_deleted 564990737 1672743383
-I'm going to say this again, nice and clear, so that there's no misunderstanding
-:
+I'm going to say this again,
+ nice and clear,
+ so that there's no misunderstanding:
\end_layout
\begin_layout Standard
\begin_inset Quotes erd
\end_inset
-, check out section
+,
+ check out section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:slitex"
+nolink "false"
\end_inset
\family sans
FoilTeX
\family default
- installed, you'll probably have to use the default
+ installed,
+ you'll probably have to use the default
\family sans
slides
\family default
- class, which isn't quite as good as
+ class,
+ which isn't quite as good as
\family sans
foils.
\end_layout
\end_layout
\begin_layout Standard
-Obviously, to use this document class, you need to select
+Obviously,
+ to use this document class,
+ you need to select
\family sans
FoilTeX
\family default
\begin_inset space \thinspace{}
\end_inset
-pt, 25
+pt,
+ 25
\begin_inset space \thinspace{}
\end_inset
Foil\SpecialChar TeX
\family default
- supports A4 and Letter paper sizes as well as a special size for working
- with 35
+ supports A4 and Letter paper sizes as well as a special size for working with 35
\begin_inset space \thinspace{}
\end_inset
mm slides.
- It doesn't support A5, B5, legal or executive paper sizes.
+ It doesn't support A5,
+ B5,
+ legal or executive paper sizes.
\end_layout
\begin_layout Itemize
Foil\SpecialChar TeX
\family default
- provides extensive footer and header capabilities including a user-defined
- logo.
+ provides extensive footer and header capabilities including a user-defined logo.
See section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:foilfoot"
+nolink "false"
\end_inset
for more details.
- The title page is treated differently to all other pages in the document
- and is
+ The title page is treated differently to all other pages in the document and is
\emph on
always
\emph default
empty
\family default
\series default
- The final output contains no page numbers, or other headers or footers
- (except footnotes of course).
+ The final output contains no page numbers,
+ or other headers or footers (except footnotes of course).
\end_layout
\begin_inset space \thinspace{}
\end_inset
-in paper, which is about the same aspect ratio as a 35
+in paper,
+ which is about the same aspect ratio as a 35
\begin_inset space \thinspace{}
\end_inset
-mm slide, making it a bit easier to work with this medium.
+mm slide,
+ making it a bit easier to work with this medium.
\end_layout
\begin_layout Labeling
\series bold
headrule
\series default
- Places a rule across the page below the header on every page except the
- title page.
+ Places a rule across the page below the header on every page except the title page.
\end_layout
\begin_layout Labeling
\series bold
footrule
\series default
- Places a rule across the page above the footer on every page except the
- title page.
+ Places a rule across the page above the footer on every page except the title page.
\end_layout
\begin_layout Labeling
Foil\SpecialChar TeX
\family default
- to use the dvips driver to rotate those pages that are set as landscape
- foils.
+ to use the dvips driver to rotate those pages that are set as landscape foils.
\end_layout
\begin_layout Labeling
\series bold
landscape
\series default
- Simply changes the page dimensions to those of a landscape page but doesn't
- do any rotation.
- Thus if you use this option you need to use an external program to rotate
- each page or feed your paper through your printer as landscape.
+ Simply changes the page dimensions to those of a landscape page but doesn't do any rotation.
+ Thus if you use this option you need to use an external program to rotate each page or feed your paper through your printer as landscape.
Note that this option effectively reverses the roles of the
\family sans
Foilhead
\end_layout
\begin_layout Standard
-Most of the environments commonly supported in other classes are also supported
- by the
+Most of the environments commonly supported in other classes are also supported by the
\family sans
foils
\family default
\end_layout
\begin_layout Standard
-That is, all the major environments apart from the sectioning environments.
- Since foils are essentially self-contained sections, with a title and body,
+That is,
+ all the major environments apart from the sectioning environments.
+ Since foils are essentially self-contained sections,
+ with a title and body,
\family sans
Foil\SpecialChar TeX
\end_layout
\begin_layout Standard
-Since foils are often used in presenting ideas or new theorems and such
-
+Since foils are often used in presenting ideas or new theorems and such
\family sans
Foil\SpecialChar TeX
Foil\SpecialChar TeX
\family default
- provides some powerful header and footer capabilities that are best set
- in the preamble although they may be set at any point in a document.
- If you want to change these settings in your document the best place to
- do so is at the very top of a foil, i.
+ provides some powerful header and footer capabilities that are best set in the preamble although they may be set at any point in a document.
+ If you want to change these settings in your document the best place to do so is at the very top of a foil,
+ i.
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Standard
-For this purpose, the following command styles are provided [
+For this purpose,
+ the following command styles are provided [
\shape smallcaps
Martin Vermeer
\shape default
\family default
that aren't directly supported by \SpecialChar LyX
- but I'll tell you what they do and how
- to use them in section
+ but I'll tell you what they do and how to use them in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:unsuppfoils"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-This section will give a simple introduction to using the different environments
- to build a set of foils.
- If you want to see an example set of foils, take a look at
+This section will give a simple introduction to using the different environments to build a set of foils.
+ If you want to see an example set of foils,
+ take a look at
\change_deleted 564990737 1671643085
the
\family typewriter
\family sans
Title
\family default
-,
+,
+
\family sans
Author
\family default
-,
+,
+
\family sans
Date
\family default
\family sans
Abstract
\family default
- environments,
+ environments,
+
\family sans
foils
\family default
Date
\family default
environment \SpecialChar LaTeX
- will substitute the current date (every time you regenerate
- the output).
+ will substitute the current date (every time you regenerate the output).
\end_layout
\begin_layout Paragraph
\end_layout
\begin_layout Standard
-As I mentioned earlier, there are four ways of starting a new foil.
+As I mentioned earlier,
+ there are four ways of starting a new foil.
For portrait foils you should use
\family sans
Foilhead
ShortFoilhead.
\family default
- The difference between these two environments is the amount of space between
- the title of the foil (the foilhead) and the body of the foil.
+ The difference between these two environments is the amount of space between the title of the foil (the foilhead) and the body of the foil.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-One problem with the support for landscape foils is the requirement that
- you have to use the
+One problem with the support for landscape foils is the requirement that you have to use the
\family typewriter
dvips
\family default
\end_layout
\begin_layout Paragraph
-Theorems, Lemmas, Proofs and more
+Theorems,
+ Lemmas,
+ Proofs and more
\end_layout
\begin_layout Standard
-You can't have two of the same type of these environments directly following
- each other.
- If you use a normal paragraph break, , you will just be extending the previous
- environment as if you had merged the two environments together.
- Rather than that, you need to insert a so-called separator.
+You can't have two of the same type of these environments directly following each other.
+ If you use a normal paragraph break,
+ ,
+ you will just be extending the previous environment as if you had merged the two environments together.
+ Rather than that,
+ you need to insert a so-called separator.
Please refer to the section entitled
\emph on
Separate Nestings
\end_layout
\begin_layout Standard
-You get all the commonly supported list styles found in other classes as
- well as two new ones.
+You get all the commonly supported list styles found in other classes as well as two new ones.
I'll only describe the new ones here.
- If you want to find out more about the other list environments check out
- the
+ If you want to find out more about the other list environments check out the
\emph on
User's Guide.
\emph default
- If you intend to use itemized lists you might also want to read about the
-
+ If you intend to use itemized lists you might also want to read about the
\family sans
Itemize
\begin_inset space ~
\begin_inset CommandInset ref
LatexCommand ref
reference "chap:bullets"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:bullet"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-The two new list styles,
+The two new list styles,
+
\family sans
TickList
\family default
\family sans
CrossList
\family default
-, are designed to make it easier for you to create lists of do's and don'ts
- or right and wrong by providing dedicated environments that use a tick
- or a cross as the label of the list.
+,
+ are designed to make it easier for you to create lists of do's and don'ts or right and wrong by providing dedicated environments that use a tick or a cross as the label of the list.
These lists are in fact dedicated variants of the
\family sans
Itemize
Foil\SpecialChar TeX
\family default
- redefines the floating tables and figures so that they appear exactly where
- they are in the text rather than pushing them to the top of the page or
- to some user specified location.
+ redefines the floating tables and figures so that they appear exactly where they are in the text rather than pushing them to the top of the page or to some user specified location.
In fact if you change the float placement settings they are simply ignored.
\end_layout
Restriction
\family default
are two commands used to control the left-footer text string.
- The first is meant to allow you to include a graphic logo on your foils
- and defaults to
+ The first is meant to allow you to include a graphic logo on your foils and defaults to
\begin_inset Quotes eld
\end_inset
Footer
\family default
- (which defaults to page numbers),
+ (which defaults to page numbers),
+
\family sans
Right
\begin_inset space ~
\emph on
lengthname
\emph default
- should be replaced by the name given to the length you want to change and
-
+ should be replaced by the name given to the length you want to change and
\emph on
newlength
\emph default
\family typewriter
in
\family default
-), millimeters (
+),
+ millimeters (
\family typewriter
mm
\family default
\end_layout
\begin_layout Standard
-It's possible to change the spacing between a foilhead and the body of the
- foil by adjusting the length specified by
+It's possible to change the spacing between a foilhead and the body of the foil by adjusting the length specified by
\family typewriter
\backslash
foilheadskip
\family default
.
- For example, to make
+ For example,
+ to make
\emph on
all
\emph default
\begin_inset space \space{}
\end_inset
-in closer to their bodies put the following in the preamble:
+in closer to their bodies put the following in the preamble:
+
\family typewriter
\backslash
\backslash
captionwidth
\family default
- You can make the captions narrower than the surrounding text by adjusting
- this length.
+ You can make the captions narrower than the surrounding text by adjusting this length.
Best done relative to
\family typewriter
\end_layout
\begin_layout Standard
-There are also several title page related lengths that you may find useful
- if you have a long title or several authors:
+There are also several title page related lengths that you may find useful if you have a long title or several authors:
\end_layout
\begin_layout Labeling
\emph on
inside
\emph default
- a list environment then all the vertical spacing between the list items
- is removed.
+ a list environment then all the vertical spacing between the list items is removed.
Note that this is a command not a length so it doesn't require
\family typewriter
\backslash
textwidth
\family default
- to your preamble so headers and footers on landscape pages are correctly
- placed when rotated.
+ to your preamble so headers and footers on landscape pages are correctly placed when rotated.
This is due to some clashes between the page layouts provided by the
\family sans
fancyheadings
\noun on
John Weiss
\noun default
-; updated by the \SpecialChar LyX
+;
+ updated by the \SpecialChar LyX
Team
\end_layout
\lang american
This section describes how to use \SpecialChar LyX
to make slides for overhead projectors.
- There are two document classes that can do this: the
+ There are two document classes that can do this:
+ the
\family typewriter
presentations
\begin_inset space \thinspace{}
(Foil\SpecialChar TeX
)
\family default
-, check out section
+,
+ check out section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Foiltex"
+nolink "false"
\end_inset
\change_deleted 564990737 1672743492
This section describes how to use \SpecialChar LyX
to make slides for overhead projectors.
- There are two document classes that can do this: the default slides class
- and the
+ There are two document classes that can do this:
+ the default slides class and the
\family sans
Foil\SpecialChar TeX
\begin_layout Standard
\change_deleted 564990737 1672743492
-I'm going to say this again, nice and clear, so that there's no misunderstanding
-:
+I'm going to say this again,
+ nice and clear,
+ so that there's no misunderstanding:
\end_layout
\begin_layout Standard
\begin_inset Quotes erd
\end_inset
-, check out section
+,
+ check out section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:foiltex"
+nolink "false"
\end_inset
\begin_layout Plain Layout
\SpecialChar ldots
or so I've been told repeatedly by its advocates.
- Having never used it, I have no idea if this claim is true or not.
+ Having never used it,
+ I have no idea if this claim is true or not.
\end_layout
\end_inset
\begin_inset Quotes erd
\end_inset
- from now on], so you're bound to have it.
- As I noted earlier, there are other classes, such as
+ from now on],
+ so you're bound to have it.
+ As I noted earlier,
+ there are other classes,
+ such as
\family sans
foils
\family default
-, which also produce slides for overhead projectors and do a better job
- at it.
- However, there are some things which
+,
+ which also produce slides for overhead projectors and do a better job at it.
+ However,
+ there are some things which
\family sans
slides
\family default
- can do which the others can't, such as generate overlays.
+ can do which the others can't,
+ such as generate overlays.
Read on to learn more!
\change_unchanged
\end_layout
\begin_layout Standard
-Obviously, to use this document class, you need to select
+Obviously,
+ to use this document class,
+ you need to select
\begin_inset Quotes eld
\end_inset
\family sans
slides
\family default
- class, anyways.
+ class,
+ anyways.
\end_layout
\begin_layout Itemize
\family sans
plain
\family default
-, but also prints out any time markers you've put in.
+,
+ but also prints out any time markers you've put in.
This is the default.
\end_layout
\family sans
empty
\family default
- The final output contains no page numbers, time markers, or alignment markers.
+ The final output contains no page numbers,
+ time markers,
+ or alignment markers.
\end_layout
\end_deeper
\family sans
slides
\family default
- class has an extra option:
+ class has an extra option:
+
\family typewriter
clock
\family default
.
- To use it, put
+ To use it,
+ put
\begin_inset Quotes eld
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:slideNote"
+nolink "false"
\end_inset
]
\change_unchanged
.
- The template file also contains some examples of the special paragraph
- environments used by this class.
+ The template file also contains some examples of the special paragraph environments used by this class.
I'll describe those next.
\end_layout
\family sans
slides
\family default
- document is the font size and type: it's the equivalent of the size
+ document is the font size and type:
+ it's the equivalent of the size
\begin_inset Quotes eld
\end_inset
\end_inset
to remind you that this is a slide.
- Your final slides will use a larger font; ergo, you'll have less space.
- Of course, the larger default screen font isn't WYSIWYG, only a reminder.
+ Your final slides will use a larger font;
+ ergo,
+ you'll have less space.
+ Of course,
+ the larger default screen font isn't WYSIWYG,
+ only a reminder.
\end_layout
\begin_layout Standard
-The next thing that becomes obvious is the changes to the paragraph environment
- pull-down box [at the far-left end of the toolbar].
+The next thing that becomes obvious is the changes to the paragraph environment pull-down box [at the far-left end of the toolbar].
Most of the paragraph environments you're used to seeing are missing.
There are also five new ones.
That's because the
\end_layout
\begin_layout Standard
-All of the other standard environments, including the section-heading environmen
-ts, aren't used in the
+All of the other standard environments,
+ including the section-heading environments,
+ aren't used in the
\family sans
slides
\family default
\end_layout
\begin_layout Standard
-On the other hand, you'll notice the following new environments:
+On the other hand,
+ you'll notice the following new environments:
\end_layout
\begin_layout Itemize
\end_layout
\begin_layout Standard
-These five are kind of quirky, due to a
+These five are kind of quirky,
+ due to a
\begin_inset Quotes eld
\end_inset
in \SpecialChar LyX
.
- You see, \SpecialChar LyX
- doesn't permit you to nest any other paragraph environment into
- an empty environment.
- Now, that's fine and dandy, but it means that you wouldn't be able to start
- a slide with anything except plain text.
- To deal with this, I've performed a little
+ You see,
+ \SpecialChar LyX
+ doesn't permit you to nest any other paragraph environment into an empty environment.
+ Now,
+ that's fine and dandy,
+ but it means that you wouldn't be able to start a slide with anything except plain text.
+ To deal with this,
+ I've performed a little
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Standard
-All five of the new paragraph environments are somewhat quirky due to inherent
- limitiations in the current version of \SpecialChar LyX
+All five of the new paragraph environments are somewhat quirky due to inherent limitiations in the current version of \SpecialChar LyX
.
- As I just mentioned, \SpecialChar LyX
+ As I just mentioned,
+ \SpecialChar LyX
forbids environments that begin with another environment.
- To get around this, the
+ To get around this,
+ the
\family sans
Slide
\family default
\family sans
Slide
\family default
-,
+,
+
\family sans
Overlay
\family default
-, and
+,
+ and
\family sans
Note
\family default
\begin_inset Quotes erd
\end_inset
- but really begin a [and, if necessary, end the previous] paragraph environment.
- Likewise, treat
+ but really begin a [and,
+ if necessary,
+ end the previous] paragraph environment.
+ Likewise,
+ treat
\family sans
InvisibleText
\family default
\end_layout
\begin_layout Standard
-A common feature of all five environments,
+A common feature of all five environments,
+
\family sans
Slide
\family default
-,
+,
+
\family sans
Overlay
\family default
-,
+,
+
\family sans
Note
\family default
-,
+,
+
\family sans
InvisibleText
\family default
\family sans
VisibleText
\family default
-, is a rather long-ish label.
- The text following this label — ordinarily the contents of the paragraph
- environment — is utterly irrelevant for
+,
+ is a rather long-ish label.
+ The text following this label —
+ ordinarily the contents of the paragraph environment —
+ is utterly irrelevant for
\family sans
Slide
\family default
-,
+,
+
\family sans
Overlay
\family default
-,
+,
+
\family sans
Note
\family default
-,
+,
+
\family sans
InvisibleText
\family default
.
\SpecialChar LyX
completely ignores it.
- In fact, you can leave these five environments completely empty.
+ In fact,
+ you can leave these five environments completely empty.
\end_layout
\emph on
have
\emph default
- to put any text after the rather long-ish label, you might want to.
+ to put any text after the rather long-ish label,
+ you might want to.
This could be a short description of the contents of the
\family sans
Slide
\family default
-, for example.
- In that case, enter your descriptive comment and hit
+,
+ for example.
+ In that case,
+ enter your descriptive comment and hit
\family sans
Return
\family default
\end_layout
\begin_layout Standard
-If, on the other hand, you don't want to enter any descriptive text, you'll
- hit another \SpecialChar LyX
+If,
+ on the other hand,
+ you don't want to enter any descriptive text,
+ you'll hit another \SpecialChar LyX
quirk.
\SpecialChar LyX
-, like nature, abhors a vacuum, and will not let you start a new paragraph
- environment until you put something in the old one.
- So, do this:
+,
+ like nature,
+ abhors a vacuum,
+ and will not let you start a new paragraph environment until you put something in the old one.
+ So,
+ do this:
\end_layout
\begin_layout Itemize
\family sans
Slide
\family default
-,
+,
+
\family sans
Overlay
\family default
-,
+,
+
\family sans
Note
\family default
-,
+,
+
\family sans
InvisibleText
\family default
\end_layout
\begin_layout Itemize
-Next, hit
+Next,
+ hit
\family sans
Return
\family default
\end_layout
\begin_layout Itemize
-Finally, change this new, empty paragraph to a
+Finally,
+ change this new,
+ empty paragraph to a
\family sans
Slide
\family default
-,
+,
+
\family sans
Overlay
\family default
-,
+,
+
\family sans
Note
\family default
-,
+,
+
\family sans
InvisibleText
\family default
\begin_layout Standard
Some future version of \SpecialChar LyX
- will, hopefully, resolve this quirkiness\SpecialChar ldots
+ will,
+ hopefully,
+ resolve this quirkiness\SpecialChar ldots
\end_layout
\family sans
Slide
\family default
-,
+,
+
\family sans
Overlay
\family default
\end_layout
\begin_layout Standard
-If you're expecting this section to teach you how to actually make a presentatio
-n, you'll be sorely disappointed.
- Naturally, I'll describe all of the ways the
+If you're expecting this section to teach you how to actually make a presentation,
+ you'll be sorely disappointed.
+ Naturally,
+ I'll describe all of the ways the
\family sans
slides
\family default
class can assist you in preparing the materials for a presentation.
- Filling in the contents, however, is up to you.
- [Then again, that
+ Filling in the contents,
+ however,
+ is up to you.
+ [Then again,
+ that
\emph on
is
\emph default
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:slideQuirk"
+nolink "false"
\end_inset
\begin_inset Quotes erd
\end_inset
- in cool blue, followed by the label,
+ in cool blue,
+ followed by the label,
+
\begin_inset Quotes eld
\end_inset
\begin_layout Standard
Slides are probably the only time you'll need to forcibly end pages in \SpecialChar LyX
-
(this can be specified in the
\family sans
Paragraph Layout
\family default
dialog).
- In fact, you'll want to, once you finish entering the contents of one slide.
- If you've entered more text than can physically fit on a slide, the extra
- overflows onto a new slide.
- I don't recommend doing this, however, since the overflow slide won't have
- any page number on it.
- Furthermore, it may interfere with any
+ In fact,
+ you'll want to,
+ once you finish entering the contents of one slide.
+ If you've entered more text than can physically fit on a slide,
+ the extra overflows onto a new slide.
+ I don't recommend doing this,
+ however,
+ since the overflow slide won't have any page number on it.
+ Furthermore,
+ it may interfere with any
\family sans
Overlay
\family default
\begin_inset Quotes erd
\end_inset
-, respectively].
- The color is a stunning magenta instead of blue, and the
+,
+ respectively].
+ The color is a stunning magenta instead of blue,
+ and the
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- will look different, in style and in length.
+ will look different,
+ in style and in length.
The label fonts of all three also differ from one another.
\end_layout
\family sans
Slide
\family default
-, if the contents of a
+,
+ if the contents of a
\family sans
Note
\family default
\family sans
Overlay
\family default
- exceed the physical size of a slide or sheet of paper, the extra will overflow
- onto a new sheet.
- Again, you should avoid this.
+ exceed the physical size of a slide or sheet of paper,
+ the extra will overflow onto a new sheet.
+ Again,
+ you should avoid this.
It defeats the whole purpose of
\family sans
Note
Slide
\family default
before displaying the text associated with it.
- One way to accomplish this is tape a flap of dark paper over the part of
- the
+ One way to accomplish this is tape a flap of dark paper over the part of the
\family sans
Slide
\family default
you want to display later.
- This method fails, however, if you wish to overlap one graph with another,
+ This method fails,
+ however,
+ if you wish to overlap one graph with another,
for example.
You would then have to fumble while speaking to align the two separate,
overlapping
\family sans
Slide
\family default
-, appended by
+,
+ appended by
\begin_inset Quotes eld
\end_inset
status collapsed
\begin_layout Plain Layout
-Presumably, mutliple
+Presumably,
+ mutliple
\family sans
Overlay
\family default
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, etc.
+,
+ etc.
\begin_inset space ~
\end_inset
\end_inset
- Clearly, you want the contents of both the
+ Clearly,
+ you want the contents of both the
\family sans
Slide
\family default
\family sans
Overlay
\family default
- to each fit on a single physical slide! You should probably consider an
-
+ to each fit on a single physical slide!
+ You should probably consider an
\family sans
Overlay
\family default
Slide
\family default
.
- Indeed, the \SpecialChar LyX
+ Indeed,
+ the \SpecialChar LyX
\family sans
slides
\family default
- class provides a visual cue for this: the label at the start of an
+ class provides a visual cue for this:
+ the label at the start of an
\family sans
Overlay
\family default
Slide
\family default
.
- Lastly, when you generate printable output, you'll find alignment markers
- in all four corners of both the
+ Lastly,
+ when you generate printable output,
+ you'll find alignment markers in all four corners of both the
\family sans
Overlay
\family default
\end_layout
\begin_layout Standard
-The major problem in overlaying two slides is aligning the contents of the
- two transparencies.
- How much space should you leave for that graph on the second slide? Worse
- still, what if you want a graph and a sentence on second slide, but there
- is text on the main transparency that goes in between them? You could try
- and insert vertical space of the right size.
+The major problem in overlaying two slides is aligning the contents of the two transparencies.
+ How much space should you leave for that graph on the second slide?
+ Worse still,
+ what if you want a graph and a sentence on second slide,
+ but there is text on the main transparency that goes in between them?
+ You could try and insert vertical space of the right size.
The better way is to use
\family sans
InvisibleText
\end_layout
\begin_layout Standard
-As their names imply,
+As their names imply,
+
\family sans
InvisibleText
\family default
\family sans
VisibleText
\family default
- are two command-like paragraph environments that make all subsequent text
- invisible and visible, respectively.
+ are two command-like paragraph environments that make all subsequent text invisible and visible,
+ respectively.
Note from section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:slideQuirk"
+nolink "false"
\end_inset
\emph on
into
\emph default
- these two environments, however.
+ these two environments,
+ however.
When you create an
\family sans
InvisibleText
\family default
-, it inserts a centered, sky-blue label into the page reading
+,
+ it inserts a centered,
+ sky-blue label into the page reading
\begin_inset Quotes eld
\end_inset
\end_inset
.
- For paragraphs following this label, the parts of the
+ For paragraphs following this label,
+ the parts of the
\family sans
Slide
\family default
\family sans
Overlay
\family default
-; it doesn't matter which] where they would be contain instead blank space.
+;
+ it doesn't matter which] where they would be contain instead blank space.
\end_layout
\family sans
VisibleText
\family default
-, the corresponding centered label is
+,
+ the corresponding centered label is
\begin_inset Quotes eld
\end_inset
\family sans
Slide
\family default
-,
+,
+
\family sans
Overlay
\family default
-, or
+,
+ or
\family sans
Note
\family default
\end_layout
\begin_layout Standard
-By now, it should be obvious how to create overlay transparencies using
- the proper combination of
+By now,
+ it should be obvious how to create overlay transparencies using the proper combination of
\family sans
InvisibleText
\family default
\family sans
Slide
\family default
-, including everything that will appear on it, whether on the main slide
- or on the
+,
+ including everything that will appear on it,
+ whether on the main slide or on the
\family sans
Overlay
\family default
\family sans
Overlay
\family default
-, insert an
+,
+ insert an
\family sans
InvisibleText
\family default
environment.
- If necessary, insert a
+ If necessary,
+ insert a
\family sans
VisibleText
\family default
\family sans
Overlay
\family default
-, change all of the
+,
+ change all of the
\family sans
InvisibleText
\family default
\family sans
slides
\family default
- class: you can't make text in the middle of a paragraph invisible, nor
- make text in the middle of an invisible paragraph visible again.
- To accomplish this feat, you'll need to use some inlined \SpecialChar LaTeX
+ class:
+ you can't make text in the middle of a paragraph invisible,
+ nor make text in the middle of an invisible paragraph visible again.
+ To accomplish this feat,
+ you'll need to use some inlined \SpecialChar LaTeX
codes.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-The commands of interest are:
+The commands of interest are:
+
\end_layout
\begin_layout Itemize
\family default
command].
If you don't know how to mark text as \SpecialChar TeX
-, see the appropriate section of
- the
+,
+ see the appropriate section of the
\emph on
User's Guide
\emph default
\family sans
Overlay
\family default
-, a
+,
+ a
\family sans
Note
\family default
Slide
\family default
.
- Here, too, the \SpecialChar LyX
+ Here,
+ too,
+ the \SpecialChar LyX
\family sans
slides
\family sans
Overlay
\family default
-] and, like the label of an
+] and,
+ like the label of an
\family sans
Overlay
\family default
is shockingly magenta.
- Additionally, the printed
+ Additionally,
+ the printed
\family sans
Note
\family default
\family sans
Slide
\family default
-, appended by
+,
+ appended by
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, etc.
+,
+ etc.
You can have multiple
\family sans
Note
\family sans
Slide
\family default
-, and, as with
+,
+ and,
+ as with
\family sans
Slide
\family default
\family sans
Overlay
\family default
-, you'll probably want to break up long
+,
+ you'll probably want to break up long
\family sans
Note
\family default
\family sans
Note
\family default
- is obvious: it contains anything additional you might want to say about
- a
+ is obvious:
+ it contains anything additional you might want to say about a
\family sans
Slide
\family default
Slide
\family default
.
- In the case of the latter, you might want to make use of time markers.
- Currently, the \SpecialChar LyX
+ In the case of the latter,
+ you might want to make use of time markers.
+ Currently,
+ the \SpecialChar LyX
\family sans
slides
\begin_inset Quotes erd
\end_inset
- support for time markers, a
+ support for time markers,
+ a
\noun on
Sli\SpecialChar TeX
\noun default
feature.
- So, you'll have to resort to using the \SpecialChar LaTeX
+ So,
+ you'll have to resort to using the \SpecialChar LaTeX
codes.
\end_layout
\begin_layout Standard
-To use time markers, you'll need to specify the extra class option
+To use time markers,
+ you'll need to specify the extra class option
\begin_inset Quotes eld
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:slidesetup"
+nolink "false"
\end_inset
].
- This option turns on timing marks, which will appear in the lower-left-hand
- corner of every
+ This option turns on timing marks,
+ which will appear in the lower-left-hand corner of every
\family sans
Note
\family default
you generate.
- To set what appears in the time marker, you use the \SpecialChar LaTeX
+ To set what appears in the time marker,
+ you use the \SpecialChar LaTeX
commands
\begin_inset Quotes eld
\end_inset
\family sans
Note
\family default
-s in this fashion, you can remind yourself how much time to spend on a particula
-r
+s in this fashion,
+ you can remind yourself how much time to spend on a particular
\family sans
Slide
\family default
\begin_layout Standard
There's one last feature to describe.
- Clearly, you'd like to print out all of your
+ Clearly,
+ you'd like to print out all of your
\family sans
Slide
\family default
Note
\family default
s on plain paper.
- However, a
+ However,
+ a
\family sans
Note
\family default
\end_layout
\begin_layout Standard
-Luckily, there are two \SpecialChar LaTeX
- commands that allow you to select what to print
- out.
+Luckily,
+ there are two \SpecialChar LaTeX
+ commands that allow you to select what to print out.
Both must be placed into the preamble of your document.
The command
\begin_inset Quotes eld
Overlay
\family default
s.
- Correspondingly, the command
+ Correspondingly,
+ the command
\begin_inset Quotes eld
\end_inset
Note
\family default
s.
- I'd advise placing both commands in the preamble and initially comment
- both out.
+ I'd advise placing both commands in the preamble and initially comment both out.
You can then preview your entire presentation as you write.
- When you're done writing, you can then uncomment one of the two to select
- what you want to print.
+ When you're done writing,
+ you can then uncomment one of the two to select what you want to print.
I like to uncomment
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- , print to a file with
+ ,
+ print to a file with
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- in its name, comment it back out, then uncomment
+ in its name,
+ comment it back out,
+ then uncomment
\begin_inset Quotes eld
\end_inset
\end_inset
file.
- I can then send either file to a printer, loading transparencies or plain
- paper as appropriate.
+ I can then send either file to a printer,
+ loading transparencies or plain paper as appropriate.
\end_layout
\begin_layout Standard
\begin_layout Standard
I have also provided a template file
\change_deleted 564990737 1671617750
-,
+,
+
\begin_inset Quotes eld
\end_inset
\end_inset
,
+
\change_unchanged
with the
\family sans
slides
\family default
class.
- To use it, begin your new presentation with
+ To use it,
+ begin your new presentation with
\family sans
File\SpecialChar menuseparator
New
VisibleText
\family default
.
- Lastly, the preamble will contain:
+ Lastly,
+ the preamble will contain:
\end_layout
\begin_layout LyX-Code
\end_layout
\begin_layout Standard
-One final thing: I created this class to support the \SpecialChar LaTeX2e
+One final thing:
+ I created this class to support the \SpecialChar LaTeX2e
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- class, one of the built-in \SpecialChar LaTeX2e
+ class,
+ one of the built-in \SpecialChar LaTeX2e
classes.
Neither I nor the rest of the \SpecialChar LyX
- Team endorse or oppose the use of this built-in
- slide class.
+ Team endorse or oppose the use of this built-in slide class.
It's here if you want it or need it.
There exist other \SpecialChar LaTeX2e
- classes for creating presentations, such as the
+ classes for creating presentations,
+ such as the
\family sans
Foils
\family default
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:foiltex"
+nolink "false"
\end_inset
\family sans
book
\family default
- document class, this provides parts, chapters and sections but does not
- provide the paragraph styles needed for a book; like the
+ document class,
+ this provides parts,
+ chapters and sections but does not provide the paragraph styles needed for a book;
+ like the
\family sans
article
\family default
- document class, it provides the abstract paragraph style.
- In two-sided mode, it does not start a new chapter on the right hand page.
+ document class,
+ it provides the abstract paragraph style.
+ In two-sided mode,
+ it does not start a new chapter on the right hand page.
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Collections"
+nolink "false"
\end_inset
(Japanese)
\family default
-, see section
+,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Japanese"
+nolink "false"
\end_inset
(KOMA-Script)
\family default
-, see section
+,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:KOMA-Script"
+nolink "false"
\end_inset
(with extra font sizes)
\family default
-, see section
+,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Extra-font-sizes"
+nolink "false"
\end_inset
W.)
\family default
-, see section
+,
+ see section
\begin_inset space ~
\end_inset
plural "false"
caps "false"
noprefix "false"
+nolink "false"
\end_inset
\begin_layout Standard
Broadway is for writing plays.
- The format is more decorative than Hollywood, and much less standardized.
+ The format is more decorative than Hollywood,
+ and much less standardized.
This format should be suitable for workshops.
\end_layout
\end_layout
\begin_layout Standard
-USLetter, left 1.6in, right 0.75in, top 0.5in, bottom 0.75in
+USLetter,
+ left 1.6in,
+ right 0.75in,
+ top 0.5in,
+ bottom 0.75in
\end_layout
\begin_layout Subsubsection
\family default
-You should not have to use this, but it is here for anything that does not
- fit otherwise.
+You should not have to use this,
+ but it is here for anything that does not fit otherwise.
\end_layout
\begin_layout Itemize
\family default
Automatically numbered.
- On screen it will be arabic, but will print as Roman.
+ On screen it will be arabic,
+ but will print as Roman.
\end_layout
\begin_layout Itemize
\family default
-A special case of Narrative to describe the setting and action as the curtain
- rises.
+A special case of Narrative to describe the setting and action as the curtain rises.
\end_layout
\begin_layout Itemize
\family default
-The speaker's (actor's) title, centered in all CAPS.
+The speaker's (actor's) title,
+ centered in all CAPS.
\end_layout
\begin_layout Itemize
\family default
Instructions to the speaker.
The parentheses are automatically inserted.
- The ( will appear on screen, but both will be in the printed play.
+ The ( will appear on screen,
+ but both will be in the printed play.
This environment is only used within
\family sans
Dialogue
\begin_inset Quotes erd
\end_inset
- It is designed to make the readers focus on content and to be easy and
- familiar for the actors to read.
+ It is designed to make the readers focus on content and to be easy and familiar for the actors to read.
Each page of a script should be one minute of film.
Nothing goes in a script that you cannot see or hear on screen.
The courier 12 pt font should be used throughout.
\begin_layout Standard
Speakers' lines should NEVER break in mid-sentence.
- If a speaker's lines continue over a page break, repeat the
+ If a speaker's lines continue over a page break,
+ repeat the
\family sans
Speaker
\family default
\end_layout
\begin_layout Standard
-USLetter, left 1.6in, right 0.75in, top 0.5in, bottom 0.75in
+USLetter,
+ left 1.6in,
+ right 0.75in,
+ top 0.5in,
+ bottom 0.75in
\end_layout
\begin_layout Subsubsection
\family default
Introduces a new INTERIOR camera set-up.
- Always followed by DAY or NIGHT, or something similar to define the lighting
- required.
+ Always followed by DAY or NIGHT,
+ or something similar to define the lighting required.
Everthing on this line in CAPS.
\end_layout
\end_layout
\begin_layout Itemize
-(O.S) — off screen
+(O.S) —
+ off screen
\end_layout
\begin_layout Itemize
-(V.0) — voice over
+(V.0) —
+ voice over
\end_layout
\begin_layout Itemize
\end_inset
g.
- — background
+ —
+ background
\end_layout
\begin_layout Itemize
C.U.
- — close-up
+ —
+ close-up
\end_layout
\begin_layout Itemize
-PAN — camera movement
+PAN —
+ camera movement
\end_layout
\begin_layout Itemize
-INSERT — cut to close-up of
+INSERT —
+ cut to close-up of
\end_layout
\begin_layout Chapter
\change_inserted 564990737 1671716212
\lang american
-Chemistry: Hazard and Precautionary Statements
+Chemistry:
+ Hazard and Precautionary Statements
\end_layout
\begin_layout Standard
\change_inserted 564990737 1671716212
\lang american
-This module provides two insets to typeset numbers and phrases of chemical
- hazard and precautionary statements.
+This module provides two insets to typeset numbers and phrases of chemical hazard and precautionary statements.
For a description see
\family sans
\lang british
\series bold
\lang american
-Chemistry: Risk and Safety Statements
+Chemistry:
+ Risk and Safety Statements
\end_layout
\begin_layout Standard
\change_inserted 564990737 1671716212
\lang american
-This module provides two insets,
+This module provides two insets,
+
\family sans
R-S number
\family default
\family sans
R-S phrase
\family default
-, accessible via the menu
+,
+ accessible via the menu
\family sans
\bar under
I
Insets
\family default
- and an environment to typeset numbers and phrases of chemical risk and
- safety statements.
+ and an environment to typeset numbers and phrases of chemical risk and safety statements.
\end_layout
\begin_layout Subsection
covington.sty
\family default
package to add environments useful for linguistics (numbered examples,
- glosses, semantic markup, tableau floats).
+ glosses,
+ semantic markup,
+ tableau floats).
You can obtain information about this module in
\family sans
\bar under
\change_inserted 564990737 1671788778
\lang american
-This module provides “FiXme” (marginal) annotations for document revision
- purposes.
- A list of annotations can be produced by using the “List of FIXMEs” paragraph
- style.
+This module provides “FiXme” (marginal) annotations for document revision purposes.
+ A list of annotations can be produced by using the “List of FIXMEs” paragraph style.
The annotations are customizable via the LaTeX preamble.
See the FiXme documentation which can be obtained from
\begin_inset CommandInset href
\change_inserted 564990737 1671788778
\lang american
-by default, the notes are only displayed in “draft” mode (if the option
- “draft” has been inserted in
+by default,
+ the notes are only displayed in “draft” mode (if the option “draft” has been inserted in
\family sans
Document\SpecialChar menuseparator
Settings\SpecialChar menuseparator
Custom
\family default
).
- To display them always, insert
+ To display them always,
+ insert
\family typewriter
\backslash
\end_inset
-,
+,
+
\family sans
Help\SpecialChar menuseparator
Specific Manuals\SpecialChar menuseparator
\change_inserted 564990737 1671788778
\lang american
-This module defines an inset to typeset reading aids (ruby, furigana) to
- Chinese characters.
- It uses the “okumakro,” “luatexja-ruby” or “ruby” package (depending on
- the TeX engine) or a fallback definition.
+This module defines an inset to typeset reading aids (ruby,
+ furigana) to Chinese characters.
+ It uses the “okumakro,” “luatexja-ruby” or “ruby” package (depending on the TeX engine) or a fallback definition.
\end_layout
\lang american
This module provides custom insets to insert TODO items in your document.
- In order to generate a “List of TODOs,” the module provides a paragraph
- style.
+ In order to generate a “List of TODOs,” the module provides a paragraph style.
Inserting “final” in
\family sans
Document\SpecialChar menuseparator
\change_inserted 564990737 1671829045
\lang american
-This module adds support for using natbib together with apacite (the bibliograph
-y style need not be apacite — it could be apacite, apacitex, or any bibliography
- that works with both the natbib and apacite packages.)
+This module adds support for using natbib together with apacite (the bibliography style need not be apacite —
+ it could be apacite,
+ apacitex,
+ or any bibliography that works with both the natbib and apacite packages.)
\end_layout
\begin_layout Section
\change_inserted 564990737 1671829045
\lang american
-This module adds ten custom insets that support colored boxes via the tcolorbox
- package.
+This module adds ten custom insets that support colored boxes via the tcolorbox package.
See
\family sans
Help\SpecialChar menuseparator
Specific Manuals\SpecialChar menuseparator
Colored boxes
\family default
-,
+,
+
\family sans
File\SpecialChar menuseparator
Open Example\SpecialChar menuseparator
\family sans
Reflectbox
\family default
-,
+,
+
\family sans
Resizebox
\family default
-,
+,
+
\family sans
Rotatebox
\family default
\lang american
Resizebox
\family default
- allows you to specify the dimensions of the text or image; permissible
- units are em, ex, in, pt, pc, cm, mm, dd, cc, nd, nc, bp, or sp; if you
- enter
+ allows you to specify the dimensions of the text or image;
+ permissible units are em,
+ ex,
+ in,
+ pt,
+ pc,
+ cm,
+ mm,
+ dd,
+ cc,
+ nd,
+ nc,
+ bp,
+ or sp;
+ if you enter
\family typewriter
!
+
\family default
for
\family typewriter
Rotatebox
\family default
allows you to rotate text around the reference point of the box.
- If you wish to rotate the box around a different origin, place the cursor
- inside the box and select Insert\SpecialChar menuseparator
-Origin; o
+ If you wish to rotate the box around a different origin,
+ place the cursor inside the box and select Insert\SpecialChar menuseparator
+Origin;
+ o
\family typewriter
rigin
\family default
c
\family default
,
+
\family typewriter
l
\family default
,
+
\family typewriter
r
\family default
,
+
\family typewriter
b
\family default
,
+
\family typewriter
t
\family default
- or meaningful combinations of these and the counterclockwise rotation angle
- is expressed in degrees.
+ or meaningful combinations of these and the counterclockwise rotation angle is expressed in degrees.
For example:
\end_layout
\lang american
Scalebox
\family default
- scales text; select Insert\SpecialChar menuseparator
+ scales text;
+ select Insert\SpecialChar menuseparator
V-Factor to add a vertical factor.
- If the vertical factor is omitted, the horizontal is used.
- Adding different horizontal and vertical values creates distortion as in
-
+ If the vertical factor is omitted,
+ the horizontal is used.
+ Adding different horizontal and vertical values creates distortion as in
\end_layout
\begin_layout Standard
\change_inserted 564990737 1671829045
\lang american
-A negative horizontal value reverses the text and a negative vertical value
- inverts it so that you get
+A negative horizontal value reverses the text and a negative vertical value inverts it so that you get
\end_layout
\begin_layout Standard
\family sans
varwidth
\family default
- package provides a variable-width minipage, whose resulting width is the
- width of its contents (if this does not exceed the specified maximum width).
- The inset has two optional arguments which can be added by placing the
- cursor inside the minipage and entering
+ package provides a variable-width minipage,
+ whose resulting width is the width of its contents (if this does not exceed the specified maximum width).
+ The inset has two optional arguments which can be added by placing the cursor inside the minipage and entering
\family sans
Insert\SpecialChar menuseparator
Vert.
\family sans
fix-cm
\family default
- package to improve the appearance of Computer Modern fonts and make them
- available with arbitrary sizes.
+ package to improve the appearance of Computer Modern fonts and make them available with arbitrary sizes.
See the
\begin_inset CommandInset href
LatexCommand href
\family default
which contains some bug fixes for \SpecialChar LaTeX
.
- If you use this module your typeset document may look different when you
- process it, depending on the respective version of
+ If you use this module your typeset document may look different when you process it,
+ depending on the respective version of
\family sans
fixltx2e
\family default
\family sans
fixltx2e
\family default
-, so the
+,
+ so the
\family sans
fixltx2e
\family default
\change_inserted 564990737 1671884699
\lang american
-This module redefines several insets (Index, Branch, URL) as being Minimalistic.
+This module redefines several insets (Index,
+ Branch,
+ URL) as being Minimalistic.
\end_layout
\begin_layout Subsection
\change_inserted 564990737 1671884699
\lang american
-This module provides two new paragraph styles:
+This module provides two new paragraph styles:
+
\end_layout
\begin_layout Enumerate
In Preamble
\family default
which puts whatever is entered into it into the preamble.
- This can be used, if one wishes, to include preamble code in the body of
- a LyX document.
+ This can be used,
+ if one wishes,
+ to include preamble code in the body of a LyX document.
\end_layout
\lang american
In Title
\family default
- which that will put its contents into the body of the LaTeX document, but
- before
+ which that will put its contents into the body of the LaTeX document,
+ but before
\family typewriter
\backslash
\family default
is issued.
This is useful for making branches and notes in title-related material.
- (However, if you put these in a Standard layout, this signals to LyX to
- output
+ (However,
+ if you put these in a Standard layout,
+ this signals to LyX to output
\family typewriter
\backslash
maketitle
\family default
-, which may then come too early.)
+,
+ which may then come too early.)
\end_layout
\begin_layout Section
\change_inserted 564990737 1672081439
\lang american
-This module resets the figure number at section start and prepends the section
- number to the figure number, as in “Figure 2.1.” (By default book and report
- document classes number by Chapter and article document classes have a
- single sequence.)
+This module resets the figure number at section start and prepends the section number to the figure number,
+ as in “Figure 2.1.” (By default book and report document classes number by Chapter and article document classes have a single sequence.)
\end_layout
\begin_layout Subsection
\change_inserted 564990737 1672081439
\lang american
-This module resets the table number at section start and prepends the section
- number to the table number, as in “Table 2.1.” (By default book and report
- document classes number by Chapter and article document classes have a
- single sequence.)
+This module resets the table number at section start and prepends the section number to the table number,
+ as in “Table 2.1.” (By default book and report document classes number by Chapter and article document classes have a single sequence.)
\end_layout
\begin_layout Section
\change_inserted 564990737 1672081439
\lang american
-This module adds an endnote inset, in addition to footnotes.
+This module adds an endnote inset,
+ in addition to footnotes.
This uses the
\family sans
endnotes
\family default
- package, which has some limitations but works with older LaTeX distributions
- as well.
+ package,
+ which has some limitations but works with older LaTeX distributions as well.
Use
\family sans
Insert\SpecialChar menuseparator
\change_inserted 564990737 1672081439
\lang american
-This module adds an endnote inset, in addition to footnotes.
+This module adds an endnote inset,
+ in addition to footnotes.
This uses the
\family sans
enotez
\family sans
endnotes
\family default
- package, but requires a fairly modern LaTeX distribution (with LaTeX3).
+ package,
+ but requires a fairly modern LaTeX distribution (with LaTeX3).
Use
\family sans
Insert\SpecialChar menuseparator
\family sans
endnotes
\family default
- package, which has some limitations but works with older LaTeX distributions
- as well.
+ package,
+ which has some limitations but works with older LaTeX distributions as well.
Use
\family sans
Insert\SpecialChar menuseparator
\family sans
endnotes
\family default
- package, but requires a fairly modern LaTeX distribution (with LaTeX3).
+ package,
+ but requires a fairly modern LaTeX distribution (with LaTeX3).
Use
\family sans
Insert\SpecialChar menuseparator
\change_inserted 564990737 1672081439
\lang american
-Leisure, Sports and Music
+Leisure,
+ Sports and Music
\end_layout
\begin_layout Subsection
\change_inserted 564990737 1672138150
\lang american
-The default numbering of numbered lists can be changed by adding an optional
- argument (menu
+The default numbering of numbered lists can be changed by adding an optional argument (menu
\family sans
\bar under
I
enumi
\family default
is the first level counter of the enumeration.
- To change the numbering for the list sublevels, replace the “
+ To change the numbering for the list sublevels,
+ replace the “
\family sans
i
\family default
\family sans
enumi
\family default
-,
+,
+
\family sans
enumii
\family default
-,
+,
+
\family sans
enumiii
\family default
-,
+,
+
\family sans
enumiv
\family default
\backslash
alph
\family default
-, respectively.
+,
+ respectively.
\end_layout
\begin_layout Standard
\series bold
\lang american
Note:
+
\series default
You can only number 26
\begin_inset space ~
\end_inset
-items with Latin letters, because this numbering is limited to single letters.
+items with Latin letters,
+ because this numbering is limited to single letters.
\end_layout
\end_inset
\series bold
\lang american
Note:
+
\series default
- When you change the label of a list level, it will be used for all following
- lists until you change the definition.
+ When you change the label of a list level,
+ it will be used for all following lists until you change the definition.
\end_layout
\end_inset
\change_inserted 564990737 1672138213
\lang american
-Official reports often include numbered paragraphs; you can achieve this
- with a variation on the approach outlined in the footnote
+Official reports often include numbered paragraphs;
+ you can achieve this with a variation on the approach outlined in the footnote
\begin_inset space ~
\end_inset
plural "false"
caps "false"
noprefix "false"
+nolink "false"
\end_inset
\change_inserted 564990737 1672138150
\lang american
-before the start of the section;
+before the start of the section;
+
\family sans
\backslash
\change_inserted 564990737 1672138150
\lang american
-I have ignored the subsection heading in this example because, with paragraphs
- numbered in this way, subsections are less likely to be used.
+I have ignored the subsection heading in this example because,
+ with paragraphs numbered in this way,
+ subsections are less likely to be used.
\end_layout
\begin_layout Subsubsection
\change_inserted 564990737 1672138150
\lang american
-To resume an enumeration, use the style
+To resume an enumeration,
+ use the style
\family sans
Enumerate-Resume
\family default
.
Its numbering appears in blue within \SpecialChar LyX
- to indicate that it is a resumed
- list and that the numbering will not be correct in \SpecialChar LyX
-, but in the output.
+ to indicate that it is a resumed list and that the numbering will not be correct in \SpecialChar LyX
+,
+ but in the output.
\end_layout
\begin_layout Standard
\series bold
\lang american
Note:
+
\series default
- If there is no previous enumeration to resume, you will get a \SpecialChar LaTeX
+ If there is no previous enumeration to resume,
+ you will get a \SpecialChar LaTeX
error.
\end_layout
\change_inserted 564990737 1672138150
\lang american
-Perhaps you might want to resume the list with a different number from the
- next one.
+Perhaps you might want to resume the list with a different number from the next one.
Or you want to start a new enumeration with a defined number.
- This is possible by adding an optional argument to the first list item
- of a normal enumeration.
- There, insert the command
+ This is possible by adding an optional argument to the first list item of a normal enumeration.
+ There,
+ insert the command
\end_layout
\begin_layout Standard
\change_inserted 564990737 1672138150
\lang american
-Lists ! Spacing
+Lists !
+ Spacing
\change_unchanged
\end_layout
\change_inserted 564990737 1672138150
\lang american
-In some cases you might want less or more vertical space between the items
- of a list.
+In some cases you might want less or more vertical space between the items of a list.
For example if the default space is too much in your opinion in this case:
\end_layout
\change_inserted 564990737 1672138150
\lang american
-You can decrease the space by adding an optional argument to the first item
- of the list.
+You can decrease the space by adding an optional argument to the first item of the list.
Add there the command
\family sans
nolistsep
\lang american
\SpecialChar LaTeX
--packages ! enumitem
+-packages !
+ enumitem
\change_unchanged
\end_layout
\change_inserted 564990737 1672138150
\lang american
-There are also many commands available to change the horizontal spacing
- and indentation.
- Here is an example where the indentation was changed to that of the paragraphs
- in the document and the label separation was set to 2
+There are also many commands available to change the horizontal spacing and indentation.
+ Here is an example where the indentation was changed to that of the paragraphs in the document and the label separation was set to 2
\begin_inset space \thinspace{}
\end_inset
labelindent=
\backslash
-parindent, labelsep=2cm
+parindent,
+ labelsep=2cm
\end_layout
\end_inset
\change_inserted 564990737 1672138150
\lang american
-Lists ! Customization
+Lists !
+ Customization
\change_unchanged
\end_layout
\change_inserted 564990737 1672138150
\lang american
-changes the description label font, the command
+changes the description label font,
+ the command
\end_layout
\begin_layout Standard
\lang american
font=
\backslash
-itshape, style=nextline
+itshape,
+ style=nextline
\end_layout
\begin_layout Standard
\begin_inset space ~
\end_inset
-radiation:
+radiation:
+
\begin_inset Argument 1
status collapsed
\change_inserted 564990737 1672138150
-labelindent=0pt, labelsep=1cm, font=
+labelindent=0pt,
+ labelsep=1cm,
+ font=
\backslash
-itshape, style=nextline
+itshape,
+ style=nextline
\end_layout
\end_inset
\end_inset
-Ionizing radiation consists of particles or electromagnetic waves that are
- energetic enough to detach electrons from atoms or molecules, therefore
- ionizing them.
+Ionizing radiation consists of particles or electromagnetic waves that are energetic enough to detach electrons from atoms or molecules,
+ therefore ionizing them.
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-counting: In computer science, reference counting is a technique of storing
- the number of references, pointers, or handles to a resource such as an
- object, block of memory, disk space or other resource.
+counting:
+ In computer science,
+ reference counting is a technique of storing the number of references,
+ pointers,
+ or handles to a resource such as an object,
+ block of memory,
+ disk space or other resource.
\end_layout
\begin_layout Standard
\lang american
\SpecialChar LaTeX
--packages ! enumitem
+-packages !
+ enumitem
\change_unchanged
\end_layout
paralist
\family default
to provide nine new list environments.
- Itemized and enumerated lists can be typeset within paragraphs, as paragraphs
- and in a compact version.
+ Itemized and enumerated lists can be typeset within paragraphs,
+ as paragraphs and in a compact version.
Most environments have optional arguments to format the labels.
- Additionally, the \SpecialChar LaTeX
- list environments itemize and enumerate are extended
- to use a similar optional argument.
+ Additionally,
+ the \SpecialChar LaTeX
+ list environments itemize and enumerate are extended to use a similar optional argument.
For further details see
\family sans
File\SpecialChar menuseparator
Modules\SpecialChar menuseparator
Paragraph Lists (paralist)
\family default
-,
+,
+
\family sans
Help\SpecialChar menuseparator
Specific Manuals\SpecialChar menuseparator
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Literate-Programming"
+nolink "false"
\end_inset
- and there are three example files:
+ and there are three example files:
+
\family sans
File\SpecialChar menuseparator
Open Example\SpecialChar menuseparator
Modules\SpecialChar menuseparator
Noweb
\family default
-,
+,
+
\family sans
File\SpecialChar menuseparator
Open Example\SpecialChar menuseparator
\end_inset
- package in R for dynamic report generation has to be installed for this
- module to work:
+ package in R for dynamic report generation has to be installed for this module to work:
+
\begin_inset Flex Code
status collapsed
Specific Manuals\SpecialChar menuseparator
Knitr
\family default
-,
+,
+
\family sans
File\SpecialChar menuseparator
Open Example\SpecialChar menuseparator
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Literate-Programming"
+nolink "false"
\end_inset
\change_inserted 564990737 1672161542
\lang american
-This module allows the use of the statistical language S/R as a literate
- programming tool.
+This module allows the use of the statistical language S/R as a literate programming tool.
It requires the
\family sans
includernw
Help\SpecialChar menuseparator
Specific Manuals\SpecialChar menuseparator
Sweave,
+
\family default
\family sans
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Literate-Programming"
+nolink "false"
\end_inset
\change_inserted 564990737 1672224959
\lang american
-This modules defines theorem environments and the proof environment using
- the extended AMS machinery.
+This modules defines theorem environments and the proof environment using the extended AMS machinery.
Both numbered and unnumbered types are provided.
- By default, the theorems are numbered consecutively throughout the document.
+ By default,
+ the theorems are numbered consecutively throughout the document.
This can be changed by loading one of the
\family sans
AMS Theorems (Numbered by \SpecialChar ldots
\change_inserted 564990737 1672224959
\lang american
-This module defines some additional theorem environments for use with the
-
+This module defines some additional theorem environments for use with the
\family sans
AMS Theorems
\family default
package (which must be loaded).
- It includes Criterion, Algorithm, Axiom, Condition, Note, Notation, Summary,
- Acknowledgement, Conclusion, Fact, Assumption, Case and Question in both
- numbered and unnumbered forms.
+ It includes Criterion,
+ Algorithm,
+ Axiom,
+ Condition,
+ Note,
+ Notation,
+ Summary,
+ Acknowledgement,
+ Conclusion,
+ Fact,
+ Assumption,
+ Case and Question in both numbered and unnumbered forms.
\end_layout
\begin_layout Subsection
\change_inserted 564990737 1672224959
\lang american
-AMS Theorems (Extended, Numbered by Type within Chapters)
+AMS Theorems (Extended,
+ Numbered by Type within Chapters)
\end_layout
\begin_layout Standard
\change_inserted 564990737 1672224959
\lang american
-This module defines some additional theorem environments for use with the
-
+This module defines some additional theorem environments for use with the
\family sans
AMS Theorems (Numbered by Type within Chapters)
\family default
package (which must be loaded).
- It includes Criterion, Algorithm, Axiom, Condition, Note, Notation, Summary,
- Acknowledgement, Conclusion, Assumption and Case in both numbered and unnumbere
-d forms.
+ It includes Criterion,
+ Algorithm,
+ Axiom,
+ Condition,
+ Note,
+ Notation,
+ Summary,
+ Acknowledgement,
+ Conclusion,
+ Assumption and Case in both numbered and unnumbered forms.
Unlike the
\family sans
AMS Theorems (Extended)
\family default
- module, the different theorem types provided here each have a separate
- counter, restarted with each new chapter (e.g., criterion 1.1, criterion 1.2,
- axiom 1.1, assumption 1.1, criterion 2.1, criterion 2.2, axiom 2.1\SpecialChar ldots
-, as opposed
- to criterion 1, criterion 2, axiom 3, assumption 4...).
+ module,
+ the different theorem types provided here each have a separate counter,
+ restarted with each new chapter (e.g.,
+ criterion 1.1,
+ criterion 1.2,
+ axiom 1.1,
+ assumption 1.1,
+ criterion 2.1,
+ criterion 2.2,
+ axiom 2.1\SpecialChar ldots
+,
+ as opposed to criterion 1,
+ criterion 2,
+ axiom 3,
+ assumption 4...).
\end_layout
\begin_layout Subsection
\change_inserted 564990737 1672224959
\lang american
-AMS Theorems (Extended, Numbered by Type)
+AMS Theorems (Extended,
+ Numbered by Type)
\end_layout
\begin_layout Standard
\change_inserted 564990737 1672224959
\lang american
-This module defines some additional theorem environments for use with the
-
+This module defines some additional theorem environments for use with the
\family sans
AMS Theorems (Numbered by Type)
\family default
package (which must be loaded).
- It includes Criterion, Algorithm, Axiom, Condition, Note, Notation, Summary,
- Acknowledgement, Conclusion, Assumption and Case in both numbered and unnumbere
-d forms.
+ It includes Criterion,
+ Algorithm,
+ Axiom,
+ Condition,
+ Note,
+ Notation,
+ Summary,
+ Acknowledgement,
+ Conclusion,
+ Assumption and Case in both numbered and unnumbered forms.
Unlike the
\family sans
AMS Theorems (Extended)
\family default
- module, the different theorem types provided here each have a separate
- counter (e.g., criterion 1, criterion 2, axiom 1, assumption 1, criterion
- 3, \SpecialChar ldots
-, as opposed to criterion 1, criterion 2, axiom 3, assumption 4, \SpecialChar ldots
+ module,
+ the different theorem types provided here each have a separate counter (e.g.,
+ criterion 1,
+ criterion 2,
+ axiom 1,
+ assumption 1,
+ criterion 3,
+ \SpecialChar ldots
+,
+ as opposed to criterion 1,
+ criterion 2,
+ axiom 3,
+ assumption 4,
+ \SpecialChar ldots
).
\end_layout
\change_inserted 564990737 1672224959
\lang american
-This module defines theorem environments and the proof environment using
- the extended AMS machinery.
+This module defines theorem environments and the proof environment using the extended AMS machinery.
Both numbered and unnumbered types are provided.
Unlike the
\family sans
AMS Theorems
\family default
- module, the different theorem types provided here each have a separate
- counter (e.g., theorem 1.1, theorem 1.2, lemma 1.1, proposition 1.1, theorem
- 1.3, lemma 1.2, \SpecialChar ldots
-, as opposed to theorem 1, theorem 2, lemma 3, proposition
- 4, \SpecialChar ldots
+ module,
+ the different theorem types provided here each have a separate counter (e.g.,
+ theorem 1.1,
+ theorem 1.2,
+ lemma 1.1,
+ proposition 1.1,
+ theorem 1.3,
+ lemma 1.2,
+ \SpecialChar ldots
+,
+ as opposed to theorem 1,
+ theorem 2,
+ lemma 3,
+ proposition 4,
+ \SpecialChar ldots
).
- The numbering restarts for each chapter: theorem 1.1, theorem 2.1, \SpecialChar ldots
- It cannot
- be used if the modules
+ The numbering restarts for each chapter:
+ theorem 1.1,
+ theorem 2.1,
+ \SpecialChar ldots
+ It cannot be used if the modules
\family sans
AMS Theorems
\family default
-,
+,
+
\family sans
Standard Theorems
\family default
,
+
\family sans
Standard Theorems (Numbered by Type)
\family default
\change_inserted 564990737 1672224959
\lang american
-This module defines theorem environments and the proof environment using
- the extended AMS machinery.
+This module defines theorem environments and the proof environment using the extended AMS machinery.
Both numbered and unnumbered types are provided.
Unlike the
\family sans
AMS Theorems
\family default
- module, the different theorem types provided here each have a separate
- counter (e.g., theorem 1, theorem 2, lemma 1, proposition 1, theorem 3, lemma
- 2, \SpecialChar ldots
-, as opposed to theorem 1, theorem 2, lemma 3, proposition 4, \SpecialChar ldots
+ module,
+ the different theorem types provided here each have a separate counter (e.g.,
+ theorem 1,
+ theorem 2,
+ lemma 1,
+ proposition 1,
+ theorem 3,
+ lemma 2,
+ \SpecialChar ldots
+,
+ as opposed to theorem 1,
+ theorem 2,
+ lemma 3,
+ proposition 4,
+ \SpecialChar ldots
).
The numbering’s scope is the whole document.
- For chapter- and section-wide numbering, use one of the ‘within Sections’/‘with
-in Chapters’ modules, respectively.
+ For chapter- and section-wide numbering,
+ use one of the ‘within Sections’/‘within Chapters’ modules,
+ respectively.
It cannot be used if the modules
\family sans
AMS Theorems
\family default
-,
+,
+
\family sans
Standard Theorems
\family default
,
+
\family sans
Standard Theorems (Numbered by Type)
\family default
\change_inserted 564990737 1672224959
\lang american
-This module resets the equation number at section start and prepends the
- section number to the equation number, as in “(2.1).”
+This module resets the equation number at section start and prepends the section number to the equation number,
+ as in “(2.1).”
\end_layout
\begin_layout Subsection
\lang american
This module defines some theorem environments for use with non-AMS classes.
- By default, the theorems are numbered consecutively throughout the document.
+ By default,
+ the theorems are numbered consecutively throughout the document.
This can be changed by loading one of the
\family sans
Standard Theorems (Numbered by \SpecialChar ldots
\change_inserted 564990737 1672224959
\lang american
-This module numbers theorems and the like by chapter (i.e., the counter is
- reset at each chapter start).
+This module numbers theorems and the like by chapter (i.e.,
+ the counter is reset at each chapter start).
Use this module only with document classes that provide a chapter environment.
One of the modules
\family sans
\change_inserted 564990737 1672224959
\lang american
-This module numbers theorems and the like by section (i.e., the counter is
- reset at each section start).
+This module numbers theorems and the like by section (i.e.,
+ the counter is reset at each section start).
One of the modules
\family sans
AMS Theorems
\family sans
Standard Theorems
\family default
- modules, the different theorem types provided here each have a separate
- counter (e.g., theorem 1, theorem 2, lemma 1, proposition 1, theorem 3, lemma
- 2, \SpecialChar ldots
-, as opposed to theorem 1, theorem 2, lemma 3, proposition 4, \SpecialChar ldots
+ modules,
+ the different theorem types provided here each have a separate counter (e.g.,
+ theorem 1,
+ theorem 2,
+ lemma 1,
+ proposition 1,
+ theorem 3,
+ lemma 2,
+ \SpecialChar ldots
+,
+ as opposed to theorem 1,
+ theorem 2,
+ lemma 3,
+ proposition 4,
+ \SpecialChar ldots
).
The numbering is reset at each chapter start.
One of the modules
\family sans
AMS Theorems
\family default
-,
+,
+
\family sans
Standard Theorems
\family default
-,
+,
+
\family sans
Standard Theorems (Unnumbered)
\family default
,
+
\family sans
Standard Theorems (Numbered by Sections)
\family default
\family sans
Standard Theorems
\family default
- modules, the different theorem types provided here each have a separate
- counter (e.g., theorem 1, theorem 2, lemma 1, proposition 1, theorem 3, lemma
- 2, \SpecialChar ldots
-, as opposed to theorem 1, theorem 2, lemma 3, proposition 4, \SpecialChar ldots
+ modules,
+ the different theorem types provided here each have a separate counter (e.g.,
+ theorem 1,
+ theorem 2,
+ lemma 1,
+ proposition 1,
+ theorem 3,
+ lemma 2,
+ \SpecialChar ldots
+,
+ as opposed to theorem 1,
+ theorem 2,
+ lemma 3,
+ proposition 4,
+ \SpecialChar ldots
).
The numbering is reset at each section start.
One of the modules
\family sans
AMS Theorems
\family default
-,
+,
+
\family sans
Standard Theorems
\family default
-,
+,
+
\family sans
Standard Theorems (Unnumbered)
\family default
,
+
\family sans
Standard Theorems (Numbered by Chapters)
\family default
\family sans
Standard Theorems
\family default
- modules, the different theorem types provided here each have a separate
- counter (e.g., theorem 1, theorem 2, lemma 1, proposition 1, theorem 3, lemma
- 2, \SpecialChar ldots
-, as opposed to theorem 1, theorem 2, lemma 3, proposition 4, \SpecialChar ldots
+ modules,
+ the different theorem types provided here each have a separate counter (e.g.,
+ theorem 1,
+ theorem 2,
+ lemma 1,
+ proposition 1,
+ theorem 3,
+ lemma 2,
+ \SpecialChar ldots
+,
+ as opposed to theorem 1,
+ theorem 2,
+ lemma 3,
+ proposition 4,
+ \SpecialChar ldots
).
The numbering’s scope is the whole document.
- For chapter- and section-wide numbering, use one of the “within Chapters”/“with
-in Sections” modules, respectively.
+ For chapter- and section-wide numbering,
+ use one of the “within Chapters”/“within Sections” modules,
+ respectively.
It cannot be used if any of the modules
\family sans
AMS Theorems
\family default
-,
+,
+
\family sans
Standard Theorems
\family default
-,
+,
+
\family sans
Standard Theorems (Unnumbered)
\family default
\change_inserted 564990737 1672224959
\lang american
-This module defines only unnumbered theorem environments and the proof environme
-nt, using the extended AMS machinery.
+This module defines only unnumbered theorem environments and the proof environment,
+ using the extended AMS machinery.
It cannot be used if either of the modules
\family sans
AMS Theorems
\change_inserted 564990737 1672224959
\lang american
-This module provides a straightforward way to segregate subequations in
- LyX.
+This module provides a straightforward way to segregate subequations in LyX.
See
\family sans
Help\SpecialChar menuseparator
\change_inserted 564990737 1672236008
\lang american
-The default page layout is rather plain; for an
+The default page layout is rather plain;
+ for an
\begin_inset Flex Code
status collapsed
\end_inset
- document class, all you get is a centered page number at the bottom of
- the page.
- This document uses KOMA-script’s book class; so it appears to be a bit
- fancier.
+ document class,
+ all you get is a centered page number at the bottom of the page.
+ This document uses KOMA-script’s book class;
+ so it appears to be a bit fancier.
Once the
\family sans
Page
\begin_inset Quotes erd
\end_inset
-, you will find that the page header is divided into three fields, not surprisin
-gly labeled
+,
+ you will find that the page header is divided into three fields,
+ not surprisingly labeled
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
\backslash
lhead
\family default
-,
+,
+
\family sans
\backslash
chead
\family default
-,
+,
+
\family sans
\backslash
rhead
\family default
-,
+,
+
\family sans
\backslash
lfoot
\family default
-, etc.
- Suppose you wish to put your name in the upper left hand corner of each
- page.
- Simply insert the following command in the preamble:
+,
+ etc.
+ Suppose you wish to put your name in the upper left hand corner of each page.
+ Simply insert the following command in the preamble:
+
\end_layout
\begin_layout Standard
\lang american
You will now see your name in the upper left.
- If a field has a default entry that you would like to get rid of (often
- the page number appears in the central footer) simply include a command
- with a blank argument, e.
+ If a field has a default entry that you would like to get rid of (often the page number appears in the central footer) simply include a command with a blank argument,
+ e.
\begin_inset space \thinspace{}
\end_inset
\change_inserted 564990737 1672236008
\lang american
-There is, however, an easier way to make simple changes.
+There is,
+ however,
+ an easier way to make simple changes.
If you load the
\family sans
\bar under
Page Layout\SpecialChar menuseparator
Custom Header/Footer Text
\family default
- module, you will find you have six new environments corresponding to the
- six fields described above.
+ module,
+ you will find you have six new environments corresponding to the six fields described above.
\end_layout
\begin_layout Standard
\change_inserted 564990737 1672236008
\lang american
-Let's get really fancy: lets put the section number with the word
+Let's get really fancy:
+ lets put the section number with the word
\begin_inset Quotes eld
\end_inset
\begin_inset space \space{}
\end_inset
-Section 3) in the upper left, the page number (e.
+Section 3) in the upper left,
+ the page number (e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \space{}
\end_inset
-Page 4) in the upper right, your name in the lower left, and the date in
- the lower right.
+Page 4) in the upper right,
+ your name in the lower left,
+ and the date in the lower right.
Use your newly enabled environments to add these entries:
\end_layout
\end_inset
header:
+
\series bold
\color inherit
\color green
\lang american
Right header:
+
\color inherit
Page
\family typewriter
\color green
\lang american
Left footer:
+
\color inherit
John Q.
DocWriter
\color green
\lang american
Right footer:
+
\series bold
\color inherit
\backslash
thesection
\family default
-,
+,
+
\family sans
\backslash
thepage
\family default
access \SpecialChar LaTeX
-’s section and page counters, and so print out the current section
- and page numbers.
+’s section and page counters,
+ and so print out the current section and page numbers.
\family sans
\change_inserted 564990737 1672236008
\lang american
-The thicknesses of the horizontal rules drawn beneath the header and above
- the footer can also be modified.
- If you don't want one of the rules, set its thickness to 0.
- The header rule has a default thickness of 0.4pt, the footer rule is 0pt.
+The thicknesses of the horizontal rules drawn beneath the header and above the footer can also be modified.
+ If you don't want one of the rules,
+ set its thickness to 0.
+ The header rule has a default thickness of 0.4pt,
+ the footer rule is 0pt.
For this you will need to use \SpecialChar TeX
Code commands like
\end_layout
\change_inserted 564990737 1672236008
\lang american
-You can switch the header/footer settings on and off for individual pages
- using \SpecialChar TeX
+You can switch the header/footer settings on and off for individual pages using \SpecialChar TeX
Code commands like
\family sans
\backslash
thispagestyle{empty}
\family default
-,
+,
+
\family sans
\backslash
thispagestyle{plain}
\family default
-, and
+,
+ and
\family sans
\backslash
thispagestyle{fancy}
\family default
.
- Simply insert them in the text on the page you want changed and mark them
- as \SpecialChar TeX
+ Simply insert them in the text on the page you want changed and mark them as \SpecialChar TeX
code.
- In fact, title pages are marked as plain by default, while following pages
- are marked fancy when using the global fancy setting.
+ In fact,
+ title pages are marked as plain by default,
+ while following pages are marked fancy when using the global fancy setting.
\end_layout
\change_inserted 564990737 1672236008
\lang american
-The first command clears all existing footers avoiding any conflicts with
- your new command.
+The first command clears all existing footers avoiding any conflicts with your new command.
\end_layout
\begin_layout Standard
\change_inserted 564990737 1672236008
\lang american
-You can enter any of these commands, the simpler ones in any of your new
- environments, the more complex ones as \SpecialChar TeX
- Code commands, at any point in
- your document and they will take effect on the next page.
+You can enter any of these commands,
+ the simpler ones in any of your new environments,
+ the more complex ones as \SpecialChar TeX
+ Code commands,
+ at any point in your document and they will take effect on the next page.
\end_layout
\begin_layout Standard
\change_inserted 564990737 1672236008
\lang american
-As a final example, it is possible to include an image in the header or
- footer.
+As a final example,
+ it is possible to include an image in the header or footer.
Suppose you want to put a company logo in the upper left hand corner.
You might try something like
\end_layout
\change_inserted 564990737 1672236008
\lang american
-For more information on fancy headers, you can get the
+For more information on fancy headers,
+ you can get the
\begin_inset Flex Code
status collapsed
\lang american
\SpecialChar LaTeX
--packages ! multicol
+-packages !
+ multicol
\change_unchanged
\end_layout
Layout
\family default
dialog.
- If you want to have two columns for the whole document, you are recommended
- to use the
+ If you want to have two columns for the whole document,
+ you are recommended to use the
\family sans
Two-
\bar under
\begin_inset space ~
\end_inset
-columns for the whole document, it is recommended to use the
+columns for the whole document,
+ it is recommended to use the
\family sans
Two-column document
\family default
\begin_layout Standard
\change_deleted 564990737 1672236008
-To use multiple text columns in your document, you have to load the module
-
+To use multiple text columns in your document,
+ you have to load the module
\family sans
Multiple Columns
\family default
\end_layout
\begin_layout Standard
-Footnotes within multiple columns will be placed at the bottom of the page
- and not under each column.
- Within the different columns you can use everything, with the limitation
- that for floats you need to
+Footnotes within multiple columns will be placed at the bottom of the page and not under each column.
+ Within the different columns you can use everything,
+ with the limitation that for floats you need to
\change_deleted 564990737 1672236179
use the float option
\family sans
\begin_inset space ~
\end_inset
-columns in your text, insert a multicolumn inset via the menu
+columns in your text,
+ insert a multicolumn inset via the menu
\family sans
Insert\SpecialChar menuseparator
Custom
\begin_layout Plain Layout
\size small
-It was in the spring of the year 1894 that all London was interested, and
- the fashionable world dismayed, by the murder of the Honourable Ronald
- Adair under most unusual and inexplicable circumstances.
- The public has already learned those particulars of the crime which came
- out in the police investigation, but a good deal was suppressed upon that
- occasion, since the case for the prosecution was so overwhelmingly strong
- that it was not necessary to bring forward all the facts.
- Only now, at the end of nearly ten years, am I allowed to supply those
- missing links which make up the whole of that remarkable chain.
- The crime was of interest in itself, but that interest was as nothing to
- me compared to the inconceivable sequel, which afforded me the greatest
- shock and surprise of any event in my adventurous life.
- Even now, after this long interval, I find myself thrilling as I think
- of it, and feeling once more that sudden flood of joy, amazement, and increduli
-ty which utterly submerged my mind.
- Let me say to that public, which has shown some interest in those glimpses
- which I have occasionally given them of the thoughts and actions of a very
- remarkable man, that they are not to blame me if I have not shared my knowledge
- with them, for I should have considered it my first duty to do so, had
- I not been barred by a positive prohibition from his own lips, which was
- only withdrawn upon the third of last month.
+It was in the spring of the year 1894 that all London was interested,
+ and the fashionable world dismayed,
+ by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances.
+ The public has already learned those particulars of the crime which came out in the police investigation,
+ but a good deal was suppressed upon that occasion,
+ since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts.
+ Only now,
+ at the end of nearly ten years,
+ am I allowed to supply those missing links which make up the whole of that remarkable chain.
+ The crime was of interest in itself,
+ but that interest was as nothing to me compared to the inconceivable sequel,
+ which afforded me the greatest shock and surprise of any event in my adventurous life.
+ Even now,
+ after this long interval,
+ I find myself thrilling as I think of it,
+ and feeling once more that sudden flood of joy,
+ amazement,
+ and incredulity which utterly submerged my mind.
+ Let me say to that public,
+ which has shown some interest in those glimpses which I have occasionally given them of the thoughts and actions of a very remarkable man,
+ that they are not to blame me if I have not shared my knowledge with them,
+ for I should have considered it my first duty to do so,
+ had I not been barred by a positive prohibition from his own lips,
+ which was only withdrawn upon the third of last month.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To get 3 or more columns, set the cursor into the multicolumn inset and
- use the menu
+To get 3 or more columns,
+ set the cursor into the multicolumn inset and use the menu
\family sans
Insert\SpecialChar menuseparator
Number
\end_inset
-It can be imagined that my close intimacy with Sherlock Holmes had interested
- me deeply in crime, and that after his disappearance I never failed to
- read with care the various problems which came before the public.
- And I even attempted, more than once, for my own private satisfaction,
- to employ his methods in their solution, though with indifferent success.
- There was none, however, which appealed to me like this tragedy of Ronald
- Adair.
- As I read the evidence at the inquest, which led up to a verdict of willful
- murder against some person or persons unknown, I realized more clearly
- than I had ever done the loss which the community had sustained by the
- death of Sherlock Holmes.
- There were points about this strange business which would, I was sure,
- have specially appealed to him, and the efforts of the police would have
- been supplemented, or more probably anticipated, by the trained observation
- and the alert mind of the first criminal agent in Europe.
- All day, as I drove upon my round, I turned over the case in my mind and
- found no explanation which appeared to me to be adequate.
- At the risk of telling a twice-told tale, I will recapitulate the facts
- as they were known to the public at the conclusion of the inquest.
+It can be imagined that my close intimacy with Sherlock Holmes had interested me deeply in crime,
+ and that after his disappearance I never failed to read with care the various problems which came before the public.
+ And I even attempted,
+ more than once,
+ for my own private satisfaction,
+ to employ his methods in their solution,
+ though with indifferent success.
+ There was none,
+ however,
+ which appealed to me like this tragedy of Ronald Adair.
+ As I read the evidence at the inquest,
+ which led up to a verdict of willful murder against some person or persons unknown,
+ I realized more clearly than I had ever done the loss which the community had sustained by the death of Sherlock Holmes.
+ There were points about this strange business which would,
+ I was sure,
+ have specially appealed to him,
+ and the efforts of the police would have been supplemented,
+ or more probably anticipated,
+ by the trained observation and the alert mind of the first criminal agent in Europe.
+ All day,
+ as I drove upon my round,
+ I turned over the case in my mind and found no explanation which appeared to me to be adequate.
+ At the risk of telling a twice-told tale,
+ I will recapitulate the facts as they were known to the public at the conclusion of the inquest.
\end_layout
\end_inset
\begin_inset space ~
\end_inset
-columns if you want to, but that might not be very pleasant for the readers
- of your document.
+columns if you want to,
+ but that might not be very pleasant for the readers of your document.
\end_layout
\begin_layout Standard
\size footnotesize
The Honourable Ronald Adair was the second son of the Earl of Maynooth,
at that time governor of one of the Australian colonies.
- Adair's mother had returned from Australia to undergo the operation for
- cataract, and she, her son Ronald, and her daughter Hilda were living together
- at 427 Park Lane.
+ Adair's mother had returned from Australia to undergo the operation for cataract,
+ and she,
+ her son Ronald,
+ and her daughter Hilda were living together at 427 Park Lane.
\end_layout
\begin_layout Plain Layout
\begin_inset space ~
\end_inset
-– had, so far as was known, no enemies and no particular vices.
- He had been engaged to Miss Edith Woodley, of Carstairs, but the engagement
- had been broken off by mutual consent some months before, and there was
- no sign that it had left any very profound feeling behind it.
+– had,
+ so far as was known,
+ no enemies and no particular vices.
+ He had been engaged to Miss Edith Woodley,
+ of Carstairs,
+ but the engagement had been broken off by mutual consent some months before,
+ and there was no sign that it had left any very profound feeling behind it.
For the rest {sic} the man's life moved in a narrow and conventional circle,
for his habits were quiet and his nature unemotional.
- Yet it was upon this easy-going young aristocrat that death came, in most
- strange and unexpected form, between the hours of ten and eleven-twenty
- on the night of March 30, 1894.
+ Yet it was upon this easy-going young aristocrat that death came,
+ in most strange and unexpected form,
+ between the hours of ten and eleven-twenty on the night of March 30,
+ 1894.
\end_layout
\end_inset
\begin_inset space ~
\end_inset
-– playing continually, but never for such stakes as would hurt him.
- He was a member of the Baldwin, the Cavendish, and the Bagatelle card clubs.
- It was shown that, after dinner on the day of his death, he had played
- a rubber of whist at the latter club.
+– playing continually,
+ but never for such stakes as would hurt him.
+ He was a member of the Baldwin,
+ the Cavendish,
+ and the Bagatelle card clubs.
+ It was shown that,
+ after dinner on the day of his death,
+ he had played a rubber of whist at the latter club.
He had also played there in the afternoon.
\size default
\end_inset
– Mr.
- Murray, Sir John Hardy, and Colonel Moran
+ Murray,
+ Sir John Hardy,
+ and Colonel Moran
\begin_inset space ~
\end_inset
-– showed that the game was whist, and that there was a fairly equal fall
- of the cards.
- Adair might have lost five pounds, but not more.
- His fortune was a considerable one, and such a loss could not in any way
- affect him.
- He had played nearly every day at one club or other, but he was a cautious
- player, and usually rose a winner.
- It came out in evidence that, in partnership with Colonel Moran, he had
- actually won as much as four hundred and twenty pounds in a sitting, some
- weeks before, from Godfrey Milner and Lord Balmoral.
+– showed that the game was whist,
+ and that there was a fairly equal fall of the cards.
+ Adair might have lost five pounds,
+ but not more.
+ His fortune was a considerable one,
+ and such a loss could not in any way affect him.
+ He had played nearly every day at one club or other,
+ but he was a cautious player,
+ and usually rose a winner.
+ It came out in evidence that,
+ in partnership with Colonel Moran,
+ he had actually won as much as four hundred and twenty pounds in a sitting,
+ some weeks before,
+ from Godfrey Milner and Lord Balmoral.
So much for his recent history as it came out at the inquest.
\end_layout
\end_layout
\begin_layout Standard
-The examples in this section show some more special features of multiple
- columns.
+The examples in this section show some more special features of multiple columns.
\end_layout
\begin_layout Standard
-For more features of multiple columns, have a look at the
+For more features of multiple columns,
+ have a look at the
\begin_inset CommandInset href
LatexCommand href
name "documentation"
\end_layout
\begin_layout Standard
-To add a preface text for multiple columns, set the cursor into the multicolumn
- inset and use the menu
+To add a preface text for multiple columns,
+ set the cursor into the multicolumn inset and use the menu
\family sans
Insert\SpecialChar menuseparator
Preface
\size small
-On the evening of the crime, he returned from the club exactly at ten.
+On the evening of the crime,
+ he returned from the club exactly at ten.
His mother and sister were out spending the evening with a relation.
- The servant deposed that she heard him enter the front room on the second
- floor, generally used as his sitting-room.
- She had lit a fire there, and as it smoked she had opened the window.
- No sound was heard from the room until eleven-twenty, the hour of the return
- of Lady Maynooth and her daughter.
- Desiring to say good-night, she attempted to enter her son's room.
- The door was locked on the inside, and no answer could be got to their
- cries and knocking.
- Help was obtained, and the door forced.
+ The servant deposed that she heard him enter the front room on the second floor,
+ generally used as his sitting-room.
+ She had lit a fire there,
+ and as it smoked she had opened the window.
+ No sound was heard from the room until eleven-twenty,
+ the hour of the return of Lady Maynooth and her daughter.
+ Desiring to say good-night,
+ she attempted to enter her son's room.
+ The door was locked on the inside,
+ and no answer could be got to their cries and knocking.
+ Help was obtained,
+ and the door forced.
The unfortunate young man was found lying near the table.
- His head had been horribly mutilated by an expanding revolver bullet, but
- no weapon of any sort was to be found in the room.
+ His head had been horribly mutilated by an expanding revolver bullet,
+ but no weapon of any sort was to be found in the room.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-You can also use a section heading as the preface if you use a section command
- as \SpecialChar TeX
+You can also use a section heading as the preface if you use a section command as \SpecialChar TeX
Code.
For example the command
\end_layout
\size small
-A minute examination of the circumstances served only to make the case more
- complex.
- In the first place, no reason could be given why the young man should have
- fastened the door upon the inside.
- There was the possibility that the murderer had done this, and had afterwards
- escaped by the window.
- The drop was at least twenty feet, however, and a bed of crocuses in full
- bloom lay beneath.
+A minute examination of the circumstances served only to make the case more complex.
+ In the first place,
+ no reason could be given why the young man should have fastened the door upon the inside.
+ There was the possibility that the murderer had done this,
+ and had afterwards escaped by the window.
+ The drop was at least twenty feet,
+ however,
+ and a bed of crocuses in full bloom lay beneath.
Neither the flowers nor the earth showed any sign of having been disturbed,
- nor were there any marks upon the narrow strip of grass which separated
- the house from the road.
- Apparently, therefore, it was the young man himself who had fastened the
- door.
- But how did he come by his death? No one could have climbed up to the window
- without leaving traces.
- Suppose a man had fired through the window, he would indeed be a remarkable
- shot who could with a revolver inflict so deadly a wound.
- Again, Park Lane is a frequented thoroughfare; there is a cab stand within
- a hundred yards of the house.
+ nor were there any marks upon the narrow strip of grass which separated the house from the road.
+ Apparently,
+ therefore,
+ it was the young man himself who had fastened the door.
+ But how did he come by his death?
+ No one could have climbed up to the window without leaving traces.
+ Suppose a man had fired through the window,
+ he would indeed be a remarkable shot who could with a revolver inflict so deadly a wound.
+ Again,
+ Park Lane is a frequented thoroughfare;
+ there is a cab stand within a hundred yards of the house.
No one had heard a shot.
\end_layout
text lines is left on the page at the beginning of the multiple columns,
a page break will be inserted before the multiple columns.
- Depending on the number of lines of the preface text, you might want to
- change this space.
- This is done by setting the cursor into the mulitcolumn inset behind the
- preface (if there is any) and using the menu
+ Depending on the number of lines of the preface text,
+ you might want to change this space.
+ This is done by setting the cursor into the mulitcolumn inset behind the preface (if there is any) and using the menu
\family sans
Insert\SpecialChar menuseparator
Space
\size small
-On the evening of the crime, he returned from the club exactly at ten.
+On the evening of the crime,
+ he returned from the club exactly at ten.
His mother and sister were out spending the evening with a relation.
- The servant deposed that she heard him enter the front room on the second
- floor, generally used as his sitting-room.
- She had lit a fire there, and as it smoked she had opened the window.
- No sound was heard from the room until eleven-twenty, the hour of the return
- of Lady Maynooth and her daughter.
- Desiring to say good-night, she attempted to enter her son's room.
- The door was locked on the inside, and no answer could be got to their
- cries and knocking.
- Help was obtained, and the door forced.
+ The servant deposed that she heard him enter the front room on the second floor,
+ generally used as his sitting-room.
+ She had lit a fire there,
+ and as it smoked she had opened the window.
+ No sound was heard from the room until eleven-twenty,
+ the hour of the return of Lady Maynooth and her daughter.
+ Desiring to say good-night,
+ she attempted to enter her son's room.
+ The door was locked on the inside,
+ and no answer could be got to their cries and knocking.
+ Help was obtained,
+ and the door forced.
The unfortunate young man was found lying near the table.
- His head had been horribly mutilated by an expanding revolver bullet, but
- no weapon of any sort was to be found in the room.
+ His head had been horribly mutilated by an expanding revolver bullet,
+ but no weapon of any sort was to be found in the room.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The amount of space before and after multiple columns can be changed by
- changing the length
+The amount of space before and after multiple columns can be changed by changing the length
\begin_inset Flex Code
status collapsed
\begin_layout Plain Layout
\size small
-All day I turned these facts over in my mind, endeavouring to hit upon some
- theory which could reconcile them all, and to find that line of least resistanc
-e which my poor friend had declared to be the starting-point of every investigat
-ion.
+All day I turned these facts over in my mind,
+ endeavouring to hit upon some theory which could reconcile them all,
+ and to find that line of least resistance which my poor friend had declared to be the starting-point of every investigation.
I confess that I made little progress.
- In the evening I strolled across the Park, and found myself about six o'clock
- at the Oxford Street end of Park Lane.
- A group of loafers upon the pavements, all staring up at a particular window,
+ In the evening I strolled across the Park,
+ and found myself about six o'clock at the Oxford Street end of Park Lane.
+ A group of loafers upon the pavements,
+ all staring up at a particular window,
directed me to the house which I had come to see.
- A tall, thin man with coloured glasses, whom I strongly suspected of being
- a plain-clothes detective, was pointing out some theory of his own, while
- the others crowded round to listen to what he said.
- I got as near him as I could, but his observations seemed to me to be absurd,
+ A tall,
+ thin man with coloured glasses,
+ whom I strongly suspected of being a plain-clothes detective,
+ was pointing out some theory of his own,
+ while the others crowded round to listen to what he said.
+ I got as near him as I could,
+ but his observations seemed to me to be absurd,
so I withdrew again in some disgust.
- As I did so I struck against an elderly, deformed man, who had been behind
- me, and I knocked down several books which he was carrying.
+ As I did so I struck against an elderly,
+ deformed man,
+ who had been behind me,
+ and I knocked down several books which he was carrying.
\end_layout
\end_inset
\series bold
Note:
+
\series default
The values you set with
\begin_inset Flex Code
\begin_inset Quotes eld
\end_inset
-You're surprised to see me, sir,
+You're surprised to see me,
+ sir,
\begin_inset Quotes erd
\end_inset
- said he, in a strange, croaking voice.
+ said he,
+ in a strange,
+ croaking voice.
\end_layout
\begin_layout Plain Layout
\begin_inset Quotes eld
\end_inset
-Well, I've a conscience, sir, and when I chanced to see you go into this
- house, as I came hobbling after you, I thought to myself, I'll just step
- in and see that kind gentleman, and tell him that if I was a bit gruff
- in my manner there was not any harm meant, and that I am much obliged to
- him for picking up my books.
+Well,
+ I've a conscience,
+ sir,
+ and when I chanced to see you go into this house,
+ as I came hobbling after you,
+ I thought to myself,
+ I'll just step in and see that kind gentleman,
+ and tell him that if I was a bit gruff in my manner there was not any harm meant,
+ and that I am much obliged to him for picking up my books.
\begin_inset Quotes erd
\end_inset
\begin_inset Quotes eld
\end_inset
-Well, sir, if it isn't too great a liberty, I am a neighbour of yours, for
- you'll find my little bookshop at the corner of Church Street, and very
- happy to see you, I am sure.
- Maybe you collect yourself, sir.
+Well,
+ sir,
+ if it isn't too great a liberty,
+ I am a neighbour of yours,
+ for you'll find my little bookshop at the corner of Church Street,
+ and very happy to see you,
+ I am sure.
+ Maybe you collect yourself,
+ sir.
Here's
\noun on
British
Birds
\noun default
-, and
+,
+ and
\noun on
Catullus
\noun default
-, and
+,
+ and
\noun on
The Holy War
\noun default
\begin_inset space ~
\end_inset
-– a bargain, every one of them.
+– a bargain,
+ every one of them.
With five volumes you could just fill that gap on that second shelf.
- It looks untidy, does it not, sir?
+ It looks untidy,
+ does it not,
+ sir?
\begin_inset Quotes erd
\end_inset
\end_layout
\begin_layout Standard
-The width of the columns is automatically calculated, but you can modify
- the space between the columns.
+The width of the columns is automatically calculated,
+ but you can modify the space between the columns.
This is done by changing the length
\begin_inset Flex Code
status collapsed
\end_inset
427 Park Lane did little to clear up the problem in which I was interested.
- The house was separated from the street by a low wall and railing, the
- whole not more than five feet high.
- It was perfectly easy, therefore, for anyone to get into the garden, but
- the window was entirely inaccessible, since there was no water pipe or
- anything which could help the most active man to climb it.
- More puzzled than ever, I retraced my steps to Kensington.
- I had not been in my study five minutes when the maid entered to say that
- a person desired to see me.
+ The house was separated from the street by a low wall and railing,
+ the whole not more than five feet high.
+ It was perfectly easy,
+ therefore,
+ for anyone to get into the garden,
+ but the window was entirely inaccessible,
+ since there was no water pipe or anything which could help the most active man to climb it.
+ More puzzled than ever,
+ I retraced my steps to Kensington.
+ I had not been in my study five minutes when the maid entered to say that a person desired to see me.
To my astonishment it was none other than my strange old book collector,
- his sharp, wizened face peering out from a frame of white hair, and his
- precious volumes, a dozen of them at least, wedged under his right arm.
+ his sharp,
+ wizened face peering out from a frame of white hair,
+ and his precious volumes,
+ a dozen of them at least,
+ wedged under his right arm.
\end_layout
\end_inset
\begin_inset space \thinspace{}
\end_inset
-pt (this is the default), the rule is suppressed.
+pt (this is the default),
+ the rule is suppressed.
In the following example the rule is 2
\begin_inset space \thinspace{}
\end_inset
\begin_inset Quotes eld
\end_inset
-You're surprised to see me, sir,
+You're surprised to see me,
+ sir,
\begin_inset Quotes erd
\end_inset
- said he, in a strange, croaking voice.
+ said he,
+ in a strange,
+ croaking voice.
\end_layout
\begin_layout Plain Layout
\begin_inset Quotes eld
\end_inset
-Well, I've a conscience, sir, and when I chanced to see you go into this
- house, as I came hobbling after you, I thought to myself, I'll just step
- in and see that kind gentleman, and tell him that if I was a bit gruff
- in my manner there was not any harm meant, and that I am much obliged to
- him for picking up my books.
+Well,
+ I've a conscience,
+ sir,
+ and when I chanced to see you go into this house,
+ as I came hobbling after you,
+ I thought to myself,
+ I'll just step in and see that kind gentleman,
+ and tell him that if I was a bit gruff in my manner there was not any harm meant,
+ and that I am much obliged to him for picking up my books.
\begin_inset Quotes erd
\end_inset
\begin_inset Quotes eld
\end_inset
-Well, sir, if it isn't too great a liberty, I am a neighbour of yours, for
- you'll find my little bookshop at the corner of Church Street, and very
- happy to see you, I am sure.
- Maybe you collect yourself, sir.
+Well,
+ sir,
+ if it isn't too great a liberty,
+ I am a neighbour of yours,
+ for you'll find my little bookshop at the corner of Church Street,
+ and very happy to see you,
+ I am sure.
+ Maybe you collect yourself,
+ sir.
Here's
\noun on
British
Birds
\noun default
-, and
+,
+ and
\noun on
Catullus
\noun default
-, and
+,
+ and
\noun on
The Holy War
\noun default
\begin_inset space ~
\end_inset
-– a bargain, every one of them.
+– a bargain,
+ every one of them.
With five volumes you could just fill that gap on that second shelf.
- It looks untidy, does it not, sir?
+ It looks untidy,
+ does it not,
+ sir?
\begin_inset Quotes erd
\end_inset
\emph on
EmbeddedObjects
\emph default
- manual, section
+ manual,
+ section
\emph on
Colored
\begin_inset space ~
\begin_inset Quotes eld
\end_inset
-You're surprised to see me, sir,
+You're surprised to see me,
+ sir,
\begin_inset Quotes erd
\end_inset
- said he, in a strange, croaking voice.
+ said he,
+ in a strange,
+ croaking voice.
\end_layout
\begin_layout Plain Layout
\begin_inset Quotes eld
\end_inset
-Well, I've a conscience, sir, and when I chanced to see you go into this
- house, as I came hobbling after you, I thought to myself, I'll just step
- in and see that kind gentleman, and tell him that if I was a bit gruff
- in my manner there was not any harm meant, and that I am much obliged to
- him for picking up my books.
+Well,
+ I've a conscience,
+ sir,
+ and when I chanced to see you go into this house,
+ as I came hobbling after you,
+ I thought to myself,
+ I'll just step in and see that kind gentleman,
+ and tell him that if I was a bit gruff in my manner there was not any harm meant,
+ and that I am much obliged to him for picking up my books.
\begin_inset Quotes erd
\end_inset
\begin_inset Quotes eld
\end_inset
-Well, sir, if it isn't too great a liberty, I am a neighbour of yours, for
- you'll find my little bookshop at the corner of Church Street, and very
- happy to see you, I am sure.
- Maybe you collect yourself, sir.
+Well,
+ sir,
+ if it isn't too great a liberty,
+ I am a neighbour of yours,
+ for you'll find my little bookshop at the corner of Church Street,
+ and very happy to see you,
+ I am sure.
+ Maybe you collect yourself,
+ sir.
Here's
\noun on
British
Birds
\noun default
-, and
+,
+ and
\noun on
Catullus
\noun default
-, and
+,
+ and
\noun on
The Holy War
\noun default
\begin_inset space ~
\end_inset
-– a bargain, every one of them.
+– a bargain,
+ every one of them.
With five volumes you could just fill that gap on that second shelf.
- It looks untidy, does it not, sir?
+ It looks untidy,
+ does it not,
+ sir?
\begin_inset Quotes erd
\end_inset
\noindent
\SpecialChar LaTeX
as well as any other text processor uses by default rectangular paragraphs.
- For special cases like for example posters, invitation cards or poems you
- can modify the paragraph shape to one of your choice.
+ For special cases like for example posters,
+ invitation cards or poems you can modify the paragraph shape to one of your choice.
\change_deleted 564990737 1672311802
This can be done by using the \SpecialChar LaTeX
\family sans
shapepar
\family default
- package to provide over a dozen paragraph shapes as well as commands to
- define custom shapes.
+ package to provide over a dozen paragraph shapes as well as commands to define custom shapes.
\change_unchanged
\begin_layout Plain Layout
\size small
-Cannot be scaled, take care there is not too much text
+Cannot be scaled,
+ take care there is not too much text
\end_layout
\end_inset
\begin_layout Plain Layout
\size small
-Fragile, calculation might fail
+Fragile,
+ calculation might fail
\end_layout
\end_inset
\begin_layout Plain Layout
\size small
-Fragile, calculation might fail
+Fragile,
+ calculation might fail
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To use a shape for your paragraph, simply select it in \SpecialChar LyX
-'s pull-down box
- for environments in the toolbar.
+To use a shape for your paragraph,
+ simply select it in \SpecialChar LyX
+'s pull-down box for environments in the toolbar.
\end_layout
\begin_layout Standard
\begin_layout Nut
\lang latin
-Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+Lorem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
At vero eos et accusam et justo duo dolores et ea rebum.
- Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor
- sit amet.
- Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+ Stet clita kasd gubergren,
+ no sea takimata sanctus est Lorem ipsum dolor sit amet.
+ Lorem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
\end_layout
\begin_layout Standard
\series bold
Note
\series default
-:
+:
+
\family sans
shapepar
\family default
\end_inset
- takes care that the shape will always be preserved, no matter how much
- text is in the paragraph.
+ takes care that the shape will always be preserved,
+ no matter how much text is in the paragraph.
Therefore the paragraph size changes with the amount of contained text.
This can lead to paragraph sizes exceeding the page margins.
- To demonstrate the size scaling, here is the same example paragraph but
- with twice as much text:
+ To demonstrate the size scaling,
+ here is the same example paragraph but with twice as much text:
\end_layout
\begin_layout Standard
\begin_layout Nut
\lang latin
-Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+Lorem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
At vero eos et accusam et justo duo dolores et ea rebum.
- Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor
- sit amet.
- Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
- Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+ Stet clita kasd gubergren,
+ no sea takimata sanctus est Lorem ipsum dolor sit amet.
+ Lorem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
+ Lorem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
At vero eos et accusam et justo duo dolores et ea rebum.
- Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor
- sit amet.
- Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+ Stet clita kasd gubergren,
+ no sea takimata sanctus est Lorem ipsum dolor sit amet.
+ Lorem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
\end_layout
\begin_layout Standard
\family sans
circle
\family default
- shape are fragile, meaning that the calculation of their size can fail,
+ shape are fragile,
+ meaning that the calculation of their size can fail,
depending on the amount of text.
You will then get the \SpecialChar LaTeX
error
\end_inset
.
- In this case one can try to remove or add some text; if nothing works one
- has to use another shape.
+ In this case one can try to remove or add some text;
+ if nothing works one has to use another shape.
\end_layout
\begin_layout Standard
\begin_layout Standard
For shapes with tips you will maybe see that \SpecialChar LaTeX
-'s hyphenation routine fails
- for text in the tips.
+'s hyphenation routine fails for text in the tips.
Therefore it is often necessary to add hyphenation points
\family sans
(
\end_layout
\begin_layout Standard
-Shapepar paragraphs are either always centered or placed on the page so
- that their left border touches the left page margin.
+Shapepar paragraphs are either always centered or placed on the page so that their left border touches the left page margin.
You can therefore not use the paragraph dialog to align such paragraphs.
- A solution is to put the paragraph into a minipage or parbox and align
- the box.
+ A solution is to put the paragraph into a minipage or parbox and align the box.
The problem is hereby to find the right width for the box.
- Because if it is too wide and you center the box, the paragraph is not
- centered too because it sticks at the left side of the box.
+ Because if it is too wide and you center the box,
+ the paragraph is not centered too because it sticks at the left side of the box.
So you might have to play a bit with the width until it fits.
- Here are two heart-shaped paragraphs, the first one is not aligned, the
- second one is right-aligned:
+ Here are two heart-shaped paragraphs,
+ the first one is not aligned,
+ the second one is right-aligned:
\end_layout
\begin_layout Standard
\lang latin
Lo\SpecialChar softhyphen
-rem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+rem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
At vero eos et accusam et justo duo dolores et ea rebum.
- Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor
- sit amet.
+ Stet clita kasd gubergren,
+ no sea takimata sanctus est Lorem ipsum dolor sit amet.
\end_layout
\begin_layout Standard
\lang latin
Lo\SpecialChar softhyphen
-rem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+rem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
At vero eos et accusam et justo duo dolores et ea rebum.
- Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor
- sit amet.
+ Stet clita kasd gubergren,
+ no sea takimata sanctus est Lorem ipsum dolor sit amet.
\end_layout
\end_inset
Shapepar
\family default
to export the shape to coordinates.
- In the appearing dialog use either the outline of your shape for the coordinate
-s or the path itself.
+ In the appearing dialog use either the outline of your shape for the coordinates or the path itself.
\begin_inset Foot
status collapsed
\end_layout
\begin_layout Enumerate
-Place the cursor before the first character of your paragraph (or into a
- new empty one).
+Place the cursor before the first character of your paragraph (or into a new empty one).
\end_layout
\begin_layout Enumerate
Document
\family default
-, select the file and use
+,
+ select the file and use
\family sans
Input
\family default
\series bold
Note
\series default
-: The changed shape only applies to the current paragraph; everything is
- reset to normal for the next paragraph.
- Therefore the shape definition file must be input into every paragraph
- with the desired shape.
+:
+ The changed shape only applies to the current paragraph;
+ everything is reset to normal for the next paragraph.
+ Therefore the shape definition file must be input into every paragraph with the desired shape.
\end_layout
\end_inset
\lang latin
-Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+Lorem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
At vero eos et accusam et justo duo dolores et ea rebum.
- Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor
- sit amet.
- Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy
- eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam
- voluptua.
+ Stet clita kasd gubergren,
+ no sea takimata sanctus est Lorem ipsum dolor sit amet.
+ Lorem ipsum dolor sit amet,
+ consetetur sadipscing elitr,
+ sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat,
+ sed diam voluptua.
\end_layout
\begin_layout Standard
\series bold
A tip:
+
\series default
to draw complexer shapes in
\family sans
Jpgfdraw
\family default
- you can draw the shape in a program of your choice and import the resulting
- image to
+ you can draw the shape in a program of your choice and import the resulting image to
\family sans
Jpgfdraw
\family default
\end_inset
- For information how these styles are used and about further customization
- possibilities, have a look at the
+ For information how these styles are used and about further customization possibilities,
+ have a look at the
\begin_inset CommandInset href
LatexCommand href
name "documentation"
\family sans
Hanging
\family default
- paragraph style, that is, one where all but the first line of the paragraph
- is indented.
+ paragraph style,
+ that is,
+ one where all but the first line of the paragraph is indented.
This may not appear in your \SpecialChar LyX
document but will appear in the final output.
\end_layout
\family sans
Initials
\family default
- for paragraph environments which you can use wherever you want to have
- drop capitals.
+ for paragraph environments which you can use wherever you want to have drop capitals.
You then have three more items in the
\family sans
Insert
\change_inserted 564990737 1672311925
\lang american
-To customize the appearance of the style, see
+To customize the appearance of the style,
+ see
\family sans
Help\SpecialChar menuseparator
Embedded Objects\SpecialChar menuseparator
\change_inserted 564990737 1672312011
\lang american
-This package defines text styles to highlight, space-out, strike-through,
+This package defines text styles to highlight,
+ space-out,
+ strike-through,
underline and capitalize/small-cap text by means of the
\family sans
soul
\family default
package.
- As opposed to the markup provided by the Text Properties dialog, words
- marked-up with
+ As opposed to the markup provided by the Text Properties dialog,
+ words marked-up with
\family sans
soul
\family default
\change_inserted 564990737 1672312011
\lang american
-This module defines some character styles for logical markup:
+This module defines some character styles for logical markup:
+
\noun on
\begin_inset Flex Noun
\noun default
-,
+,
+
\emph on
\begin_inset Flex Emph
\emph default
-,
+,
+
\begin_inset Flex Strong
status collapsed
\end_inset
-, and
+,
+ and
\begin_inset Flex Code
status collapsed
User's Guide
\emph default
.
- The following subsections explain special bibliography features supported
- by \SpecialChar LyX
+ The following subsections explain special bibliography features supported by \SpecialChar LyX
.
\end_layout
\end_inset
) to refer to a cited work.
- However, in many scientific disciplines, other citation styles are in use.
+ However,
+ in many scientific disciplines,
+ other citation styles are in use.
The most common one is the author-year style (e.
\begin_inset space \thinspace{}
\end_inset
).
\SpecialChar LyX
- supports three packages that provide this style,
+ supports three packages that provide this style,
+
\begin_inset Flex Code
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-, and
+,
+ and
\begin_inset Flex Code
status collapsed
\end_inset
.
- Each of these packages has their pros and cons, which cannot be listed
- in detail.
+ Each of these packages has their pros and cons,
+ which cannot be listed in detail.
If you only want to have simple author-year (or author-numerical) style,
or if you want to use one of the countless style files for
\begin_inset Flex Code
\end_inset
-, then the established
+,
+ then the established
\begin_inset Flex Code
status collapsed
\end_inset
package is probably your choice.
- If you look for specific citation styles common in law studies, you might
- consider the
+ If you look for specific citation styles common in law studies,
+ you might consider the
\begin_inset Flex Code
status collapsed
\end_inset
package.
- If you want to have full control over the formatting or look for advanced
- features such as ibidem, footnote citations, full title citations, advanced
- date formats (such as 400 BC) or full localization to other languages than
- English, you should definitely consider
+ If you want to have full control over the formatting or look for advanced features such as ibidem,
+ footnote citations,
+ full title citations,
+ advanced date formats (such as 400 BC) or full localization to other languages than English,
+ you should definitely consider
\begin_inset Flex Code
status collapsed
\end_inset
-, which exceeds all other packages in terms of features, but is also quite
- heavy and more resource-hungry.
+,
+ which exceeds all other packages in terms of features,
+ but is also quite heavy and more resource-hungry.
\end_layout
\begin_layout Standard
\end_inset
-,
+,
+
\begin_inset Flex Noun
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Noun
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Noun
status collapsed
\end_inset
6.5.3 in the User's Guide for more information on these choices).
- With all these packages, you will get some extra features in the citation
- dialog and you can select the style of the reference (
+ With all these packages,
+ you will get some extra features in the citation dialog and you can select the style of the reference (
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
-Knuth, 1984
+Knuth,
+ 1984
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
etc.).
Note that either package needs specifically designed style files.
- They all ship their own, but there are lots of additional style files,
+ They all ship their own,
+ but there are lots of additional style files,
and there is even an interactive style file builder
\begin_inset Foot
status collapsed
\begin_layout Standard
Sometimes you might need to divide your bibliography into several sections.
- If you are for instance a historian, the possibility to separate sources
- and scientific works is most likely a
+ If you are for instance a historian,
+ the possibility to separate sources and scientific works is most likely a
\begin_inset Quotes eld
\end_inset
\end_inset
.
- Unfortunately, Bib\SpecialChar TeX
+ Unfortunately,
+ Bib\SpecialChar TeX
itself does not allow you to do this.
But with the help of some \SpecialChar LaTeX
- packages, Bib\SpecialChar TeX
+ packages,
+ Bib\SpecialChar TeX
can be extended to fit your needs.
\end_layout
\begin_layout Standard
\SpecialChar LyX
- provides native support for one of these packages,
+ provides native support for one of these packages,
+
\family typewriter
bibtopic
\family default
multibib
\family default
) is that you don't need to define new citation commands.
- Instead, you need to prepare different bibliographic databases which include
- the entries for the different sections of the bibliography.
- For example: If you want to divide your bibliography into the sections
-
+ Instead,
+ you need to prepare different bibliographic databases which include the entries for the different sections of the bibliography.
+ For example:
+ If you want to divide your bibliography into the sections
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, you first need to create two bibliographic databases, e.
+,
+ you first need to create two bibliographic databases,
+ e.
\begin_inset space \thinspace{}
\end_inset
.
Now you can insert multiple Bib\SpecialChar TeX
- bibliographies, one for each section of
- your bibliography.
- Returning to our example: Insert the Bib\SpecialChar TeX
+ bibliographies,
+ one for each section of your bibliography.
+ Returning to our example:
+ Insert the Bib\SpecialChar TeX
bibliography
\begin_inset Flex Code
status collapsed
.
You are free to use the same or different styles for each section.
- Additionally, you can choose if the bibliography section should contain
-
+ Additionally,
+ you can choose if the bibliography section should contain
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- of the specified database(s) (which is the default),
+ of the specified database(s) (which is the default),
+
\begin_inset Quotes eld
\end_inset
\end_inset
.
- This might be useful if you would like to separate your bibliography into
- three sections:
+ This might be useful if you would like to separate your bibliography into three sections:
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
\end_inset
- removes the bibliography title, you have to manually re-add that, too (as
- a chapter* or section*, for instance).
+ removes the bibliography title,
+ you have to manually re-add that,
+ too (as a chapter* or section*,
+ for instance).
\end_layout
\begin_layout Standard
\family sans
Biblatex
\family default
-, the procedure is a bit different.
+,
+ the procedure is a bit different.
Since
\family typewriter
bibtopic
\family sans
Biblatex
\family default
-, the aforementioned
+,
+ the aforementioned
\begin_inset Flex Noun
status collapsed
Biblatex
\family default
.
- However,
+ However,
+
\family sans
Biblatex
\family default
\end_inset
- entry option and then filter bibliography sections by keyword (by adding
-
+ entry option and then filter bibliography sections by keyword (by adding
\begin_inset Flex Code
status collapsed
\end_inset
- button), or you can filter by entry types (such as
+ button),
+ or you can filter by entry types (such as
\emph on
book
\emph default
\end_inset
- field, or you can create so-called
+ field,
+ or you can create so-called
\begin_inset Quotes eld
\end_inset
\end_inset
to which you can assign individual entries.
- Please refer to the Biblatex manual, section
+ Please refer to the Biblatex manual,
+ section
\emph on
Subdivided Bibliographies
\emph default
-, for details.
+,
+ for details.
\end_layout
\begin_layout Section
\end_layout
\begin_layout Standard
-Multiple bibliographies, e.
+Multiple bibliographies,
+ e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \space{}
\end_inset
-a bibliography for each part, chapter, section, subsection or child (sub-documen
-t) of the document, are also supported by \SpecialChar LyX
+a bibliography for each part,
+ chapter,
+ section,
+ subsection or child (sub-document) of the document,
+ are also supported by \SpecialChar LyX
.
- In order to enable it, go to
+ In order to enable it,
+ go to
\begin_inset Flex Noun
status collapsed
\begin_inset space \thinspace{}
\end_inset
-g.,
+g.,
+
\begin_inset Quotes eld
\end_inset
\begin_inset space \thinspace{}
\end_inset
-g., section) of your document.
- In the output, a separate bibliography, containing only the references
- done in the current unit is generated.
+g.,
+ section) of your document.
+ In the output,
+ a separate bibliography,
+ containing only the references done in the current unit is generated.
\end_layout
\begin_layout Standard
If you use Bib\SpecialChar TeX
-, either the
+,
+ either the
\begin_inset Flex Code
status collapsed
\end_inset
.
- In all other cases,
+ In all other cases,
+
\begin_inset Flex Code
status collapsed
status collapsed
\begin_layout Plain Layout
-An alternative approach, if you are willing to use some
+An alternative approach,
+ if you are willing to use some
\begin_inset Flex Noun
status collapsed
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Inserting-TeX-Code"
+nolink "false"
\end_inset
-), is to use the
+),
+ is to use the
\begin_inset Flex Code
status collapsed
\end_inset
- is used, \SpecialChar LyX
+ is used,
+ \SpecialChar LyX
encloses the specified units in
\begin_inset Flex Code
status collapsed
in order to create the units.
Note that this approach has some limitations.
- First, every citation reference has to be inside some
+ First,
+ every citation reference has to be inside some
\begin_inset Flex Code
status collapsed
\begin_inset space \thinspace{}
\end_inset
-g., before the first section if you use
+g.,
+ before the first section if you use
\begin_inset Quotes eld
\end_inset
as \SpecialChar TeX
code (for instance to work around the mentioned limitation).
- Note, though, that
+ Note,
+ though,
+ that
\begin_inset Flex Code
status collapsed
\end_inset
- always processes all references of a bibliography database, even if they
- are not cited.
+ always processes all references of a bibliography database,
+ even if they are not cited.
This can result in odd labels (e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset Quotes erd
\end_inset
- if two works of this author from 2014 are in the database, even if only
- one is cited).
+ if two works of this author from 2014 are in the database,
+ even if only one is cited).
\end_layout
\begin_layout Standard
\family sans
Biblatex
\family default
-, the
+,
+ the
\begin_inset Flex Code
status collapsed
\end_inset
option is used instead.
- If you need specific units, you can start them with the \SpecialChar TeX
+ If you need specific units,
+ you can start them with the \SpecialChar TeX
code
\begin_inset Flex Code
status collapsed
\end_inset
-, respectively.
- If you also want to control the end of the unit, use the environment
+,
+ respectively.
+ If you also want to control the end of the unit,
+ use the environment
\begin_inset Flex Code
status collapsed
\end_inset
instead.
- Note, though, that
+ Note,
+ though,
+ that
\begin_inset Flex Code
status collapsed
\end_inset
s cannot be nested.
- In addition to the individual bibliography of the current unit,
+ In addition to the individual bibliography of the current unit,
+
\family sans
Biblatex
\family default
- also provides an easy way to output all bibliographies, subsequently, at
- one place (e.
+ also provides an easy way to output all bibliographies,
+ subsequently,
+ at one place (e.
\begin_inset space \thinspace{}
\end_inset
-g., at the end of the document).
+g.,
+ at the end of the document).
Select
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- from the Content combo box of the Bib(la)TeX inset dialog in order to achieve
- this.
+ from the Content combo box of the Bib(la)TeX inset dialog in order to achieve this.
Please refer to the
\family sans
Biblatex
\begin_layout Standard
\SpecialChar LyX
provides 216 bullet shapes that can be accessed from a simple dialog.
- Using this dialog you can easily specify what bullet shape to use at each
- level of an itemized list.
- These settings are document-wide so you won't be able to specify different
- sets of bullets for different paragraphs.
+ Using this dialog you can easily specify what bullet shape to use at each level of an itemized list.
+ These settings are document-wide so you won't be able to specify different sets of bullets for different paragraphs.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-Well, actually you can but you'll have to do it by hand.
+Well,
+ actually you can but you'll have to do it by hand.
\end_layout
\end_inset
\begin_layout Standard
The dialog provides you with a table of bullet shapes.
- A column of buttons on the left of the table provides access to the six
- different panels of bullet shapes.
- The row of buttons across the top is used to select which bullet depth
- you are changing.
+ A column of buttons on the left of the table provides access to the six different panels of bullet shapes.
+ The row of buttons across the top is used to select which bullet depth you are changing.
\change_deleted 244031559 1603875981
- A text entry under the table shows the currently selected bullet shape's
- \SpecialChar LaTeX
+ A text entry under the table shows the currently selected bullet shape's \SpecialChar LaTeX
equivalent and this can be edited if desired.
- If you do modify the text you will also need to specify any needed packages
- in the \SpecialChar LaTeX
+ If you do modify the text you will also need to specify any needed packages in the \SpecialChar LaTeX
preamble.
\change_unchanged
\SpecialChar LyX
doesn't stop you using bullets from packages you don't have.
If you get errors from \SpecialChar LaTeX
- when you try to view or print the file, then it
- is likely you are missing a package.
+ when you try to view or print the file,
+ then it is likely you are missing a package.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
\SpecialChar LyX
- doesn't restrict your use since you may be editing locally and exporting
- elsewhere.
+ doesn't restrict your use since you may be editing locally and exporting elsewhere.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Select which bullet depth you want to change then select the bullet shape
- and size.
+Select which bullet depth you want to change then select the bullet shape and size.
Any changes will not be visible in \SpecialChar LyX
-, but are visible when viewing the document.
+,
+ but are visible when viewing the document.
\end_layout
\begin_layout Standard
-You can reset a bullet shape to the default simply by clicking your right
- mouse button on the appropriate bullet depth button.
+You can reset a bullet shape to the default simply by clicking your right mouse button on the appropriate bullet depth button.
\begin_inset Foot
status open
\emph on
really
\emph default
- want to have multiple sets of paragraphs with different sets of bullets
- in each, then you're going to have to get your hands dirty with \SpecialChar TeX
+ want to have multiple sets of paragraphs with different sets of bullets in each,
+ then you're going to have to get your hands dirty with \SpecialChar TeX
code.
- The bullet selection dialog can help though because it provides you with
- the \SpecialChar LaTeX
+ The bullet selection dialog can help though because it provides you with the \SpecialChar LaTeX
code for a wide range of bullet shapes.
To make your own custom paragraphs you have the following options:
\end_layout
\end_inset
to specify a new bullet shape for a given depth.
- You'll also need to save the current bullet shape so you can restore it
- again afterwards.
+ You'll also need to save the current bullet shape so you can restore it again afterwards.
In this itemized list the following \SpecialChar LaTeX
- code was used to change the bullet
- used for the first depth.
+ code was used to change the bullet used for the first depth.
\end_layout
\begin_deeper
\end_deeper
\begin_layout Itemize
-Note that the itemize depth is specified in Roman numerals as part of the
-
+Note that the itemize depth is specified in Roman numerals as part of the
\family typewriter
\backslash
\end_inset
- Specify each individual entry by starting each item with the bullet shape
- enclosed in a
+ Specify each individual entry by starting each item with the bullet shape enclosed in a
\begin_inset Quotes eld
\end_inset
\end_inset
.
- For example, this item was started with
+ For example,
+ this item was started with
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Plain Layout
-You'll also need to revert the labelitem back to its previous setting for
- the global bullet shape settings to remain in effect.
+You'll also need to revert the labelitem back to its previous setting for the global bullet shape settings to remain in effect.
The way used here was:
\end_layout
\end_layout
\begin_layout Standard
-When you are working on a large file with many sections, it is often convenient
- to break up the document into several files, or perhaps you have something
- where a table may change from time to time, but the preceding text does
- not.
- In these cases, you should seriously consider using multipart documents.
- For example, scientific papers often have five major sections: the introduction
-, observations, results, discussion, and conclusion.
+When you are working on a large file with many sections,
+ it is often convenient to break up the document into several files,
+ or perhaps you have something where a table may change from time to time,
+ but the preceding text does not.
+ In these cases,
+ you should seriously consider using multipart documents.
+ For example,
+ scientific papers often have five major sections:
+ the introduction,
+ observations,
+ results,
+ discussion,
+ and conclusion.
Each of these could be its own separate \SpecialChar LyX
- file, with one
+ file,
+ with one
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- file which contains the title, authors, abstract, references, etc., plus
- the five included files.
+ file which contains the title,
+ authors,
+ abstract,
+ references,
+ etc.,
+ plus the five included files.
It is important to note that each of these files is a full \SpecialChar LyX
- file which
- can be formatted and printed on its own, as well as included in a master
- file.
- Each of these files must have the same document class, however—don't attempt
- to mix book classes with article classes.
+ file which can be formatted and printed on its own,
+ as well as included in a master file.
+ Each of these files must have the same document class,
+ however—
+don't attempt to mix book classes with article classes.
You may also include \SpecialChar LaTeX
- files; however, these files must not have their own
- preamble (i.
+ files;
+ however,
+ these files must not have their own preamble (i.
\begin_inset space \thinspace{}
\end_inset
\end_inset
- line must be deleted) or else errors will be generated when you try to
- make a DVI file.
+ line must be deleted) or else errors will be generated when you try to make a DVI file.
\end_layout
\begin_layout Standard
\end_inset
.
- When you click on this selection a small box is inserted into the file
- at the current cursor location.
- Clicking on the box raises a dialog which allows you to select the file
- to be included, and the method of its inclusion.
+ When you click on this selection a small box is inserted into the file at the current cursor location.
+ Clicking on the box raises a dialog which allows you to select the file to be included,
+ and the method of its inclusion.
\end_layout
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- are similar in many ways, but there are also some notable differences:
+ are similar in many ways,
+ but there are also some notable differences:
\end_layout
\begin_layout Enumerate
\begin_inset Quotes erd
\end_inset
- are typeset beginning on a new page, while files that are
+ are typeset beginning on a new page,
+ while files that are
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, on the other hand, infinite sub-inputting is possible.
+,
+ on the other hand,
+ infinite sub-inputting is possible.
\end_layout
\begin_layout Enumerate
\begin_inset Quotes erd
\end_inset
- files, while maintaining the actual counters (pagination etc.) and references
- (please refer to the section
+ files,
+ while maintaining the actual counters (pagination etc.) and references (please refer to the section
\emph on
Child
\begin_inset space ~
\end_layout
\begin_layout Standard
-Hence,
+Hence,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- included file allows you to include a file typeset exactly as it appears
- in the file, i.
+ included file allows you to include a file typeset exactly as it appears in the file,
+ i.
\begin_inset space \thinspace{}
\end_inset
\end_inset
- mode, with the characters set in a fixed-width typewriter font.
- Normally, spaces in this file are invisible, though two consecutive spaces
- are conserved, unlike \SpecialChar LyX
+ mode,
+ with the characters set in a fixed-width typewriter font.
+ Normally,
+ spaces in this file are invisible,
+ though two consecutive spaces are conserved,
+ unlike \SpecialChar LyX
's normal treatment of spaces.
- However, setting the
+ However,
+ setting the
\begin_inset Flex Noun
status collapsed
\end_layout
\begin_layout Standard
-Generally, the master file is converted into a full \SpecialChar LaTeX
+Generally,
+ the master file is converted into a full \SpecialChar LaTeX
file before typesetting,
while the included files are converted to \SpecialChar LaTeX
- files that do not have all the
- preamble information.
+ files that do not have all the preamble information.
\end_layout
\begin_layout Subsection
\begin_layout Plain Layout
This section is somewhat out of date.
- Need to describe default master documents and how children are opened when
- the master is.
+ Need to describe default master documents and how children are opened when the master is.
[[FIXME]]
\end_layout
\begin_layout Standard
It is possible to set up cross-references between the different files.
- First, open all the files in question: let's call them A and B in a two
- file example, where B is included in A.
- Let's say you insert a label in A, then want to reference it in B.
- Open the cross-reference dialog whilst in document B, and you can select
- the
+ First,
+ open all the files in question:
+ let's call them A and B in a two file example,
+ where B is included in A.
+ Let's say you insert a label in A,
+ then want to reference it in B.
+ Open the cross-reference dialog whilst in document B,
+ and you can select the
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Standard
-If you work with child documents, you might want to have only one main bibliogra
-phy at the end, but still be able to have a selected bibliography for the
- child if you output it on its own.
+If you work with child documents,
+ you might want to have only one main bibliography at the end,
+ but still be able to have a selected bibliography for the child if you output it on its own.
Here is how to achieve this.
\end_layout
\begin_layout Standard
-For the main document, you just insert a bibliography inset at the place
- where the main bibliography has to appear (within the master file or within
- a child).
- If the bibliography inset is in the master file, the references will be
- inherited by all children, so they are available in the citation dialog
- within each child.
+For the main document,
+ you just insert a bibliography inset at the place where the main bibliography has to appear (within the master file or within a child).
+ If the bibliography inset is in the master file,
+ the references will be inherited by all children,
+ so they are available in the citation dialog within each child.
\end_layout
\begin_layout Standard
-For child-specific bibliographies, insert bibliography insets within the
- child documents, at the place where the bibliography should appear when
- the child is compiled separately.
- However, the trick is to insert them into a branch (
+For child-specific bibliographies,
+ insert bibliography insets within the child documents,
+ at the place where the bibliography should appear when the child is compiled separately.
+ However,
+ the trick is to insert them into a branch (
\family sans
Insert\SpecialChar menuseparator
Branch\SpecialChar menuseparator
Insert New Branch...
\family default
-), e.
+),
+ e.
\begin_inset space \thinspace{}
\end_inset
\end_inset
.
- Within the children, activate the branch (
+ Within the children,
+ activate the branch (
\family sans
Document\SpecialChar menuseparator
Settings...\SpecialChar menuseparator
Branches
\family default
).
- Within the master, deactivate the branch (
+ Within the master,
+ deactivate the branch (
\family sans
Document\SpecialChar menuseparator
Settings...\SpecialChar menuseparator
Branches
\family default
).
- Now the child's bibliography will be ignored by the master, but considered
- by the child.
+ Now the child's bibliography will be ignored by the master,
+ but considered by the child.
\end_layout
\begin_layout Standard
\begin_inset space \thinspace{}
\end_inset
-g., one per child in the
+g.,
+ one per child in the
\emph on
main document
\emph default
-), please refer to sec.
+),
+ please refer to sec.
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multiple-Bibliographies"
+nolink "false"
\end_inset
\end_inset
) that automates this process.
- To use it, you must have either the
+ To use it,
+ you must have either the
\begin_inset Flex Code
status collapsed
\end_inset
python modules installed on your system.
- By default, the script prefers the
+ By default,
+ the script prefers the
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-Independently of the platform, the generation of a particular archive format
- can be forced by adding either the
+Independently of the platform,
+ the generation of a particular archive format can be forced by adding either the
\begin_inset Flex Code
status collapsed
\end_inset
.
- (Make sure you add the switch after the script name, not before it.)
+ (Make sure you add the switch after the script name,
+ not before it.)
\end_layout
\begin_layout Section
\end_layout
\begin_layout Standard
-The default page layout is rather plain; for an
+The default page layout is rather plain;
+ for an
\begin_inset Flex Code
status collapsed
\end_inset
- document class, all you get is a centered page number at the bottom of
- the page.
- This document uses KOMA-script's book class, so it appears to be a bit
- fancier.
- But to really put on a show, you need to set the document page style to
-
+ document class,
+ all you get is a centered page number at the bottom of the page.
+ This document uses KOMA-script's book class,
+ so it appears to be a bit fancier.
+ But to really put on a show,
+ you need to set the document page style to
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, as mentioned in the
+,
+ as mentioned in the
\emph on
User Guide
\emph default
.
This section describes the \SpecialChar LaTeX
code you need to insert in your \SpecialChar LaTeX
- preamble in
- order to get the desired effects.
+ preamble in order to get the desired effects.
\end_layout
\begin_layout Standard
-For more information on fancy headers, see the
+For more information on fancy headers,
+ see the
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-The page header is divided into three fields, not surprisingly labeled
+The page header is divided into three fields,
+ not surprisingly labeled
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-, etc.
- Suppose you wish to put your name in the upper left hand corner of each
- page.
- Simply insert the following command in the preamble:
+,
+ etc.
+ Suppose you wish to put your name in the upper left hand corner of each page.
+ Simply insert the following command in the preamble:
+
\end_layout
\begin_layout Standard
\begin_layout Standard
You will now see your name in the upper left.
- If a field has a default entry that you would like to get rid of (often
- the page number appears in the central footer) simply include a command
- with a blank argument, e.
+ If a field has a default entry that you would like to get rid of (often the page number appears in the central footer) simply include a command with a blank argument,
+ e.
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Standard
-Let's get really fancy: lets put the section number with the word
+Let's get really fancy:
+ lets put the section number with the word
\begin_inset Quotes eld
\end_inset
\begin_inset space \space{}
\end_inset
-Section 3) in the upper left, the page number (e.
+Section 3) in the upper left,
+ the page number (e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \space{}
\end_inset
-Page 4) in the upper right, your name in the lower left, and the date in
- the lower right.
+Page 4) in the upper right,
+ your name in the lower left,
+ and the date in the lower right.
The following commands should now appear in the preamble:
\end_layout
\end_inset
access \SpecialChar LaTeX
-'s section and page counters, and so print out the current section
- and page number.
+'s section and page counters,
+ and so print out the current section and page number.
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-The thicknesses of the horizontal rules drawn beneath the header and above
- the footer can also be modified.
- If you don't want one of the rules, set its thickness to 0.
- The header rule has a default thickness of 0.4pt, the footer rule is 0pt.
+The thicknesses of the horizontal rules drawn beneath the header and above the footer can also be modified.
+ If you don't want one of the rules,
+ set its thickness to 0.
+ The header rule has a default thickness of 0.4pt,
+ the footer rule is 0pt.
Use commands
\family typewriter
\end_layout
\begin_layout Standard
-You can switch the header/footer settings on and off for individual pages
- using commands like
+You can switch the header/footer settings on and off for individual pages using commands like
\begin_inset Flex Code
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-, and
+,
+ and
\begin_inset Flex Code
status collapsed
\end_inset
.
- Simply insert them in the text on the page you want changed and mark them
- as \SpecialChar TeX
+ Simply insert them in the text on the page you want changed and mark them as \SpecialChar TeX
code.
- In fact, title pages are marked as plain by default, while following pages
- are marked fancy when using the global fancy setting.
+ In fact,
+ title pages are marked as plain by default,
+ while following pages are marked fancy when using the global fancy setting.
\end_layout
\begin_layout Standard
-As a final example, it is possible to include an image in the header or
- footer.
+As a final example,
+ it is possible to include an image in the header or footer.
Suppose you want to put a company logo in the upper lefthand corner.
You might try something like
\end_layout
\SpecialChar LyX
has long supported the export of documents to various web-friendly formats,
such as HTML.
- Before version 2.0, however, HTML export was always accomplished by the
- use of external converters.
+ Before version 2.0,
+ however,
+ HTML export was always accomplished by the use of external converters.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
For details on the use of external converters with \SpecialChar LyX
-, see the
+,
+ see the
\emph on
Converters
\emph default
\end_inset
- These fall into two large groups: there are converters that use \SpecialChar LaTeX
- as an
- intermediate format, such as
+ These fall into two large groups:
+ there are converters that use \SpecialChar LaTeX
+ as an intermediate format,
+ such as
\begin_inset Flex Code
status collapsed
\end_inset
-,
+,
+
\begin_inset Flex Code
status collapsed
\end_inset
-, and
+,
+ and
\begin_inset Flex Code
status collapsed
\end_inset
-, relying upon \SpecialChar LyX
+,
+ relying upon \SpecialChar LyX
to produce the \SpecialChar LaTeX
-; and there is a converter that works directly
- on \SpecialChar LyX
- files,
+;
+ and there is a converter that works directly on \SpecialChar LyX
+ files,
+
\begin_inset Flex Code
status collapsed
\begin_layout Standard
The \SpecialChar LaTeX
--based converters have the advantage that, in principle, they know everythin
-g about the exported document that \SpecialChar LaTeX
+-based converters have the advantage that,
+ in principle,
+ they know everything about the exported document that \SpecialChar LaTeX
does.
- Such converters do not care, for example, if a certain block of code was
- produced by \SpecialChar LyX
+ Such converters do not care,
+ for example,
+ if a certain block of code was produced by \SpecialChar LyX
or was Evil Red Text.
These converters know about
\begin_inset Flex Code
\end_inset
- files, counters, and references, and can often make use of the
+ files,
+ counters,
+ and references,
+ and can often make use of the
\begin_inset Flex Code
status collapsed
files generated by Bib\SpecialChar TeX
.
- On the other hand, \SpecialChar LaTeX
- is a very hard language to parse—it is sometimes said
- that only \SpecialChar TeX
+ On the other hand,
+ \SpecialChar LaTeX
+ is a very hard language to parse—
+it is sometimes said that only \SpecialChar TeX
itself understands \SpecialChar TeX
-—and \SpecialChar LaTeX
--based converters will often choke on
- what seem to be quite simple constructs; complex ones can throw them completely
-, and as of this writing, for example, the
+—
+and \SpecialChar LaTeX
+-based converters will often choke on what seem to be quite simple constructs;
+ complex ones can throw them completely,
+ and as of this writing,
+ for example,
+ the
\emph on
Embedded Objects
\emph default
\end_inset
-, though the others will.
+,
+ though the others will.
The other issue concerns how math is handled.
- These converters typically convert the formulae into little pictures that
- are then linked from the HTML document.
+ These converters typically convert the formulae into little pictures that are then linked from the HTML document.
Since these are actually generated by \SpecialChar LaTeX
-, they are accurate.
- But they do not scale well, and just getting them to look as if they are
- actually meant to be in your document—so that the font sizes seem to be
- roughly the same—can be a challenge.
+,
+ they are accurate.
+ But they do not scale well,
+ and just getting them to look as if they are actually meant to be in your document—
+so that the font sizes seem to be roughly the same—
+can be a challenge.
\end_layout
\begin_layout Standard
\end_inset
) solves some of these problems.
- In particular, the formulae it produces scale perfectly, since it renders
- math using a combination of HTML and CSS rather than converting the formulae
- to images.
+ In particular,
+ the formulae it produces scale perfectly,
+ since it renders math using a combination of HTML and CSS rather than converting the formulae to images.
But even moderately complex formula are rendered less well than with
\begin_inset Flex Code
status collapsed
\end_inset
-; this reflects the limitations of HTML.
+;
+ this reflects the limitations of HTML.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-That said,
+That said,
+
\begin_inset Flex Code
status collapsed
\end_inset
- can also use jsMath and MathJax for equations, but this setting is only
- available globally and requires one to have access to a server that runs
- the backend.
+ can also use jsMath and MathJax for equations,
+ but this setting is only available globally and requires one to have access to a server that runs the backend.
\end_layout
\end_inset
- More importantly (as of version 1.1.1, at least),
+ More importantly (as of version 1.1.1,
+ at least),
+
\begin_inset Flex Code
status collapsed
\end_inset
- has limited support for math macros and no support for user-defined paragraph
- or character styles.
+ has limited support for math macros and no support for user-defined paragraph or character styles.
These limitations make
\begin_inset Flex Code
status collapsed
unsuitable for many of the documents \SpecialChar LyX
users produce.
- In principle, of course, these problems could be solved, but the \SpecialChar LyX
- developers
- have decided to follow a different path and have made \SpecialChar LyX
- itself capable of
- writing XHTML, just as it is capable of writing \SpecialChar LaTeX
-, DocBook, and plaintext.
+ In principle,
+ of course,
+ these problems could be solved,
+ but the \SpecialChar LyX
+ developers have decided to follow a different path and have made \SpecialChar LyX
+ itself capable of writing XHTML,
+ just as it is capable of writing \SpecialChar LaTeX
+,
+ DocBook,
+ and plaintext.
\end_layout
\begin_layout Standard
-As of this writing, XHTML output remains under development and should probably
- be regarded as
+As of this writing,
+ XHTML output remains under development and should probably be regarded as
\begin_inset Quotes eld
\end_inset
\end_inset
-, which can be found in the \SpecialChar LyX
+,
+ which can be found in the \SpecialChar LyX
source tree or
\begin_inset CommandInset href
LatexCommand href
\end_inset
-, usually contains up-to-date information about the state of XHTML output.
+,
+ usually contains up-to-date information about the state of XHTML output.
See also the list of XHTML bugs on
\begin_inset CommandInset href
LatexCommand href
\end_inset
- Still, the developers have chosen this approach because it has several
- potential advantages over the other two.
+ Still,
+ the developers have chosen this approach because it has several potential advantages over the other two.
\end_layout
\begin_layout Standard
These advantages are primarily due to the fact that the XHTML output routines,
since they are part of \SpecialChar LyX
-, know everything \SpecialChar LyX
- knows about the document being
- exported.
+,
+ know everything \SpecialChar LyX
+ knows about the document being exported.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-Another advantage is that, since these routines are internal to \SpecialChar LyX
-, they are
- immune to changes in \SpecialChar LyX
-'s file format, or to changes in the semantics of
- existing insets.
+Another advantage is that,
+ since these routines are internal to \SpecialChar LyX
+,
+ they are immune to changes in \SpecialChar LyX
+'s file format,
+ or to changes in the semantics of existing insets.
\end_layout
\end_inset
So they know about the table of contents (as displayed in the outline),
- about the counters associated with different paragraph styles, and about
- user-defined styles.
+ about the counters associated with different paragraph styles,
+ and about user-defined styles.
The XHTML output routines know what \SpecialChar LyX
knows about internationalization,
- too, so they will output
+ too,
+ so they will output
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, depending upon the language in effect at the time.
+,
+ depending upon the language in effect at the time.
\end_layout
\begin_layout Standard
-Quite generally, the output routines know what \SpecialChar LyX
+Quite generally,
+ the output routines know what \SpecialChar LyX
knows about document layout,
- that is, about how the document is to be rendered on screen.
+ that is,
+ about how the document is to be rendered on screen.
We use this information when we output the document as XHTML.
- In particular, \SpecialChar LyX
+ In particular,
+ \SpecialChar LyX
\emph on
automatically
\emph default
- generates CSS style information corresponding to the layout information
- it uses to render the document on screen: if section headings are supposed
- to be sans-serif and bold as seen in \SpecialChar LyX
-, then (by default) they will be sans-seri
-f and bold when viewed in a web browser, too.
- And this is true not just for pre-defined styles, like Section, but for
- any style, including user-defined styles.
- Indeed, the XHTML output routines make no distinction between user-defined
- paragraph and
+ generates CSS style information corresponding to the layout information it uses to render the document on screen:
+ if section headings are supposed to be sans-serif and bold as seen in \SpecialChar LyX
+,
+ then (by default) they will be sans-serif and bold when viewed in a web browser,
+ too.
+ And this is true not just for pre-defined styles,
+ like Section,
+ but for any style,
+ including user-defined styles.
+ Indeed,
+ the XHTML output routines make no distinction between user-defined paragraph and
\change_deleted 244031559 1603876931
character
\change_inserted 244031559 1603876940
text
\change_unchanged
styles and \SpecialChar LyX
-'s own pre-defined styles: in each case, everything \SpecialChar LyX
- knows about
- the styles is contained in the layout files.
- And much the same is true as regards pre-defined textual insets, such as
- footnotes, and various custom insets.
+'s own pre-defined styles:
+ in each case,
+ everything \SpecialChar LyX
+ knows about the styles is contained in the layout files.
+ And much the same is true as regards pre-defined textual insets,
+ such as footnotes,
+ and various custom insets.
\end_layout
\begin_layout Standard
-The result is that XHTML output can be customized and extended in exactly
- the same way \SpecialChar LaTeX
- output can be customized and extended: through layout files
- and modules.
+The result is that XHTML output can be customized and extended in exactly the same way \SpecialChar LaTeX
+ output can be customized and extended:
+ through layout files and modules.
See chapter five of the
\emph on
Customization
\end_layout
\begin_layout Standard
-The remainder of this chapter contains more detailed information on XHTML
- output, its limitations, and ways to work around those limitations.
+The remainder of this chapter contains more detailed information on XHTML output,
+ its limitations,
+ and ways to work around those limitations.
\end_layout
\begin_layout Section
\begin_inset Newline newline
\end_inset
-MathML is a dialect of XML designed specifically for mathematics on the
- web, and it typically renders very well in browsers that support it.
- The disadvantage is that not all browsers support MathML, and support is
- not complete even in the Gecko-based browsers, such as Firefox.
+MathML is a dialect of XML designed specifically for mathematics on the web,
+ and it typically renders very well in browsers that support it.
+ The disadvantage is that not all browsers support MathML,
+ and support is not complete even in the Gecko-based browsers,
+ such as Firefox.
\begin_inset Newline newline
\end_inset
If \SpecialChar LyX
- is unable to render a formula as MathML—for example, if the formula
- uses the
+ is unable to render a formula as MathML—
+for example,
+ if the formula uses the
\begin_inset Flex Code
status collapsed
\end_inset
- package or ERT—then it will instead output the formula as an image.
+ package or ERT—
+then it will instead output the formula as an image.
\end_layout
\begin_inset Newline newline
\end_inset
-As mentioned above,
+As mentioned above,
+
\begin_inset Flex Code
status collapsed
\end_inset
- outputs math as HTML, styled by CSS.
+ outputs math as HTML,
+ styled by CSS.
\begin_inset Foot
status collapsed
\end_inset
- For simple formulae, this can work quite well, though with more complicated
- formulae it tends to break down.
- Still, this method has the advantage that it is very widely supported and
- so it may be appropriate for documents that contain only a little, fairly
- simple math.
+ For simple formulae,
+ this can work quite well,
+ though with more complicated formulae it tends to break down.
+ Still,
+ this method has the advantage that it is very widely supported and so it may be appropriate for documents that contain only a little,
+ fairly simple math.
\begin_inset Newline newline
\end_inset
-If Lyx is unable to render a formula as HTML—for example, if the formula
- uses the
+If Lyx is unable to render a formula as HTML—
+for example,
+ if the formula uses the
\begin_inset Flex Code
status collapsed
\end_inset
- package or ERT—then it will instead output the formula as an image.
+ package or ERT—
+then it will instead output the formula as an image.
\end_layout
\end_inset
-, \SpecialChar LyX
- will output formulae as images, the very same images, in fact, that are
- used for instant preview.
+,
+ \SpecialChar LyX
+ will output formulae as images,
+ the very same images,
+ in fact,
+ that are used for instant preview.
\begin_inset Foot
status collapsed
\emph on
not
\emph default
-have to be on for images to be output, however.
+have to be on for images to be output,
+ however.
\end_layout
\end_inset
- The advantage to this method is that the images are simply generated by
- \SpecialChar LaTeX
-, so they are very accurate.
- The disadvantage, as mentioned earlier, is that these are bitmapped images,
- so they do not scale terribly well, and one cannot copy them, etc.
+ The advantage to this method is that the images are simply generated by \SpecialChar LaTeX
+,
+ so they are very accurate.
+ The disadvantage,
+ as mentioned earlier,
+ is that these are bitmapped images,
+ so they do not scale terribly well,
+ and one cannot copy them,
+ etc.
\begin_inset Newline newline
\end_inset
status collapsed
\begin_layout Plain Layout
-For those who want to know, this controls the resolution of the image in
- dots per inch and is based upon a default of 75 dpi.
+For those who want to know,
+ this controls the resolution of the image in dots per inch and is based upon a default of 75 dpi.
\end_layout
\end_inset
\end_inset
If \SpecialChar LyX
- for some reason fails to create an image for a formula (e.g., if a required
- \SpecialChar LaTeX
- package is not installed), then it will fall back to outputing the raw
- \SpecialChar LaTeX
+ for some reason fails to create an image for a formula (e.g.,
+ if a required \SpecialChar LaTeX
+ package is not installed),
+ then it will fall back to outputing the raw \SpecialChar LaTeX
.
\end_layout
\begin_inset Newline newline
\end_inset
-Finally, \SpecialChar LyX
+Finally,
+ \SpecialChar LyX
will happily output math as \SpecialChar LaTeX
.
- As well as being the output of last resort, this method can be used with
- such tools as
+ As well as being the output of last resort,
+ this method can be used with such tools as
\begin_inset CommandInset href
LatexCommand href
name "jsMath"
\end_inset
-, which uses JavaScript to render \SpecialChar LaTeX
+,
+ which uses JavaScript to render \SpecialChar LaTeX
embedded in HTML documents.
\SpecialChar LyX
wraps the \SpecialChar LaTeX
\end_inset
-, as is required for jsMath.
+,
+ as is required for jsMath.
\end_layout
\begin_layout Standard
\end_inset
.
- By default, \SpecialChar LyX
+ By default,
+ \SpecialChar LyX
outputs MathML.
- This is a document-wide setting, therefore.
+ This is a document-wide setting,
+ therefore.
\end_layout
\begin_layout Standard
-Eventually, \SpecialChar LyX
- will offer the user the option to select an alternate output
- method for a particular inset, say, one that isn't being rendered very
- well by MathML.
+Eventually,
+ \SpecialChar LyX
+ will offer the user the option to select an alternate output method for a particular inset,
+ say,
+ one that isn't being rendered very well by MathML.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-That said, since \SpecialChar LyX
- falls back to images if the inset contains ERT, then one
- can force output as an image by putting some harmless ERT into the math,
- for example:
+That said,
+ since \SpecialChar LyX
+ falls back to images if the inset contains ERT,
+ then one can force output as an image by putting some harmless ERT into the math,
+ for example:
+
\begin_inset Formula $a=b\relax$
\end_inset
\begin_layout Standard
Citation labels are generated by the same machinery that generates \SpecialChar LyX
-'s on-screen
- labels, so the labels will look in the output much as they do in \SpecialChar LyX
-, though
- better.
- If you are using numerical citations, then \SpecialChar LyX
+'s on-screen labels,
+ so the labels will look in the output much as they do in \SpecialChar LyX
+,
+ though better.
+ If you are using numerical citations,
+ then \SpecialChar LyX
will output numerical labels,
- such as [1] or [17], rather than simply showing the citation key in square
- brackets, as it does on-screen.
- If you are using author-year citations, then \SpecialChar LyX
- will add lowercase letters
- to the years, just as Bib\SpecialChar TeX
- does, if it finds more than one citation for
- a given author-year combination.
+ such as [1] or [17],
+ rather than simply showing the citation key in square brackets,
+ as it does on-screen.
+ If you are using author-year citations,
+ then \SpecialChar LyX
+ will add lowercase letters to the years,
+ just as Bib\SpecialChar TeX
+ does,
+ if it finds more than one citation for a given author-year combination.
The labels will be printed with the bibliography entries.
- Note that there is, at present, no way to customize the appearance of the
- labels, for example, to choose between square brackets and parentheses.
+ Note that there is,
+ at present,
+ no way to customize the appearance of the labels,
+ for example,
+ to choose between square brackets and parentheses.
\end_layout
\begin_layout Standard
-Bibliography output is handled by the same machinery that handles the presentati
-on of reference information in the citation dialog, so you will see in the
- XHTML output pretty much what you would see if you were to look at a given
- entry in the citation dialog.
- The formatting can be customized in your layout file or, preferably, in
- a module.
+Bibliography output is handled by the same machinery that handles the presentation of reference information in the citation dialog,
+ so you will see in the XHTML output pretty much what you would see if you were to look at a given entry in the citation dialog.
+ The formatting can be customized in your layout file or,
+ preferably,
+ in a module.
See the
\emph on
Customization
\end_layout
\begin_layout Standard
-The main defect at present is that cross-referenced information is printed
- with every entry with which it is associated.
+The main defect at present is that cross-referenced information is printed with every entry with which it is associated.
So you can see things like this:
\end_layout
\begin_layout Quote
-Jason Stanley,
+Jason Stanley,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, in
+,
+ in
\emph on
-Language in Context: Selected Essays
+Language in Context:
+ Selected Essays
\emph default
- (Oxford: Oxford University Press, 2007), pp.
+ (Oxford:
+ Oxford University Press,
+ 2007),
+ pp.
30–68.
\end_layout
\begin_layout Quote
-Jason Stanley,
+Jason Stanley,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, in
+,
+ in
\emph on
-Language in Context: Selected Essays
+Language in Context:
+ Selected Essays
\emph default
- (Oxford: Oxford University Press, 2007), pp.
+ (Oxford:
+ Oxford University Press,
+ 2007),
+ pp.
201–30.
\end_layout
\begin_layout Standard
There is no support at present for sectioned bibliographies.
- If you have multiple bibliographies, then \SpecialChar LyX
- will print the same bibliography
- over and over.
+ If you have multiple bibliographies,
+ then \SpecialChar LyX
+ will print the same bibliography over and over.
\end_layout
\begin_layout Section
\begin_layout Standard
\SpecialChar LyX
- will happily export indexes as XHTML, but with certain limitations at the
- moment.
+ will happily export indexes as XHTML,
+ but with certain limitations at the moment.
\end_layout
\begin_layout Standard
-Index export will be most reliable when you do not attempt to use the fancy
- constructs that are described in the section on indexes in the
+Index export will be most reliable when you do not attempt to use the fancy constructs that are described in the section on indexes in the
\emph on
User's Guide
\emph default
\end_inset
- We'll describe how they are handled using the subsection headings from
- that section.
+ We'll describe how they are handled using the subsection headings from that section.
\end_layout
\begin_layout Itemize
-Grouping Index Entries (aka, sub-entries): \SpecialChar LyX
+Grouping Index Entries (aka,
+ sub-entries):
+ \SpecialChar LyX
makes an effort to support these,
but the entries must be separated by
\begin_inset Quotes eld
\end_inset
- !
+ !
+
\begin_inset Quotes erd
\end_inset
-, that is, there must be spaces around the exclamation point.
- This is because it is otherwise too difficult to check for escaped exclamation
- points, ones in math, and so forth.
+,
+ that is,
+ there must be spaces around the exclamation point.
+ This is because it is otherwise too difficult to check for escaped exclamation points,
+ ones in math,
+ and so forth.
\end_layout
\begin_layout Itemize
-Page Ranges: There is no support at all for page ranges, since these make
- no sense with XHMTL.
- Instead, you will just get two index entries, one at either end.
+Page Ranges:
+ There is no support at all for page ranges,
+ since these make no sense with XHMTL.
+ Instead,
+ you will just get two index entries,
+ one at either end.
\end_layout
\begin_layout Itemize
-Cross-referencing: There is no support for cross-referencing.
+Cross-referencing:
+ There is no support for cross-referencing.
If \SpecialChar LyX
finds an entry containing the
\begin_inset Quotes eld
\begin_inset Quotes erd
\end_inset
- construct, it is just dropped, and the rest is treated as an ordinary index
- entry.
+ construct,
+ it is just dropped,
+ and the rest is treated as an ordinary index entry.
\end_layout
\begin_layout Itemize
-Index Entry Order: \SpecialChar LyX
+Index Entry Order:
+ \SpecialChar LyX
does support attempts to fix the sorting order.
It will take what is before the first `@' it finds and use that for sorting,
taking what follows the first `@' to be the actual entry.
- At present, \SpecialChar LyX
- does not check for escaped `@', so do not try to index email
- addresses.
+ At present,
+ \SpecialChar LyX
+ does not check for escaped `@',
+ so do not try to index email addresses.
\end_layout
\begin_layout Itemize
-Index Entry Layout: You can format entries by using the text style dialog,
+Index Entry Layout:
+ You can format entries by using the text style dialog,
or by using any other method available within \SpecialChar LyX
itself.
- There is no support for constructs like:
+ There is no support for constructs like:
+
\begin_inset Quotes eld
\end_inset
\end_inset
.
- Indeed, if \SpecialChar LyX
- finds a pipe symbol, `|', in an entry, it will delete it and
- everything that follows it.
+ Indeed,
+ if \SpecialChar LyX
+ finds a pipe symbol,
+ `|',
+ in an entry,
+ it will delete it and everything that follows it.
\end_layout
\begin_layout Itemize
-Multiple Indexes: There is no support for multiple indexes.
- Rather, all index entries will be printed as one large index.
- To avoid our printing several versions of the index, we print only the
- main index, so make sure you have one.
+Multiple Indexes:
+ There is no support for multiple indexes.
+ Rather,
+ all index entries will be printed as one large index.
+ To avoid our printing several versions of the index,
+ we print only the main index,
+ so make sure you have one.
\end_layout
\begin_layout Section
\begin_layout Standard
There is at present no support for glossaries.
- Adding it would be fairly trivial, and welcome.
+ Adding it would be fairly trivial,
+ and welcome.
\end_layout
\begin_layout Chapter
\begin_layout Standard
\change_inserted 1075283030 1616534386
-Apart from HTML, \SpecialChar LyX
+Apart from HTML,
+ \SpecialChar LyX
can generate documents in the DocBook XML vocabulary.
- With versions 2.3 and before, only select templates could be used to generate
- DocBook documents (only version 4).
+ With versions 2.3 and before,
+ only select templates could be used to generate DocBook documents (only version 4).
Starting with \SpecialChar LyX
- 2.4, most \SpecialChar LyX
- layouts can generate valid DocBook documents (only
- version 5).
+ 2.4,
+ most \SpecialChar LyX
+ layouts can generate valid DocBook documents (only version 5).
This feature is built into \SpecialChar LyX
and does not require the use of external tools.
\end_layout
\begin_layout Standard
\change_inserted 1075283030 1616534437
-The result is that the DocBook output can be customized and extended in
- exactly the same way \SpecialChar LaTeX
- output can be customized and extended: through layout
- files and modules.
+The result is that the DocBook output can be customized and extended in exactly the same way \SpecialChar LaTeX
+ output can be customized and extended:
+ through layout files and modules.
See chapter five of the
\emph on
Customization
\change_inserted 1075283030 1616534475
Most \SpecialChar LyX
- features are supported with DocBook, like math output.
+ features are supported with DocBook,
+ like math output.
\end_layout
\begin_layout Itemize
\change_inserted 1075283030 1616534741
-Math output is performed mostly in MathML (the major exception being constructio
-ns not supported by \SpecialChar LyX
-, i.e.
+Math output is performed mostly in MathML (the major exception being constructions not supported by \SpecialChar LyX
+,
+ i.e.
ERTs).
All formulae are also available in raw \SpecialChar TeX
- in the DocBook output for further
- processing.
+ in the DocBook output for further processing.
\end_layout
\begin_layout Itemize
\change_inserted 1075283030 1616534852
-Bibliographies and citations are implemented, including with an external
- BibTeX file.
- Bibliography entries are not prerendered when the detailed information
- are available, but rather output with the standard DocBook constructs.
+Bibliographies and citations are implemented,
+ including with an external BibTeX file.
+ Bibliography entries are not prerendered when the detailed information are available,
+ but rather output with the standard DocBook constructs.
The external DocBook processor is expected to handle the rendering of entries.
\end_layout
\begin_layout Itemize
\change_inserted 1075283030 1616534863
-Indexes are supported, including multiple indices.
+Indexes are supported,
+ including multiple indices.
Grouping (with
\family typewriter
!
\family default
-), page ranges, and cross-references (
+),
+ page ranges,
+ and cross-references (
\family typewriter
|see
\family default
-) are supported, with the exception of the same symbols escaped.
+) are supported,
+ with the exception of the same symbols escaped.
Entry order (
\family typewriter
@
\begin_layout Itemize
\change_inserted 1075283030 1616534948
-Format for tables: \SpecialChar LyX
- can generate tables either as HTML (default value) or
- CALS, depending on the user's requirements.
+Format for tables:
+ \SpecialChar LyX
+ can generate tables either as HTML (default value) or CALS,
+ depending on the user's requirements.
Most DocBook processors accept both formats.
\end_layout
\begin_layout Itemize
\change_inserted 1075283030 1616535006
-MathML prefix: in DocBook, MathML is included within its own name space,
+MathML prefix:
+ in DocBook,
+ MathML is included within its own name space,
unlike HTML.
- The implication is that there must be an indication of the tags belonging
- to the MathML standard.
- Three choices are offered:
+ The implication is that there must be an indication of the tags belonging to the MathML standard.
+ Three choices are offered:
+
\end_layout
\begin_deeper
\begin_layout Itemize
\change_inserted 1075283030 1616535044
-Inline: the MathML name space is defined for each formula (using the
+Inline:
+ the MathML name space is defined for each formula (using the
\family typewriter
xmlns
\family default
\family typewriter
m
\family default
- prefix (default): the MathML name space is defined at the document level
- (using the
+ prefix (default):
+ the MathML name space is defined at the document level (using the
\family typewriter
xmlns:m
\family default
\family typewriter
m
\family default
-: for instance,
+:
+ for instance,
+
\family typewriter
m:math
\end_layout
\family typewriter
mml
\family default
- prefix: similar to the
+ prefix:
+ similar to the
\family typewriter
m
\family default
- option, but with
+ option,
+ but with
\family typewriter
mml
\end_layout
\change_inserted 1075283030 1616620470
This option is especially useful if you want \SpecialChar LyX
- to match your personal style
- or to work with buggy software that only accepts one prefix for MathML.
+ to match your personal style or to work with buggy software that only accepts one prefix for MathML.
\change_unchanged
\end_layout
\begin_layout Standard
The `\SpecialChar LyX
server' allows other programs to talk to \SpecialChar LyX
-, invoke \SpecialChar LyX
- commands, and retrieve
- information about the \SpecialChar LyX
+,
+ invoke \SpecialChar LyX
+ commands,
+ and retrieve information about the \SpecialChar LyX
internal state.
- This is only intended for advanced users, but they should find it useful.
+ This is only intended for advanced users,
+ but they should find it useful.
It is by writing to the \SpecialChar LyX
- server, for example, that bibliography managers,
- such as JabRef, are able to
+ server,
+ for example,
+ that bibliography managers,
+ such as JabRef,
+ are able to
\begin_inset Quotes eld
\end_inset
\end_inset
-, (except on Windows, where
+,
+ (except on Windows,
+ where
\emph on
local
\emph default
\end_inset
- dialog, for example
+ dialog,
+ for example
\begin_inset Flex Code
status collapsed
\end_inset
-, or
+,
+ or
\begin_inset Flex Code
status collapsed
\end_inset
- on Windows (where any working path instead of lyxpipe can be used, for
- example
+ on Windows (where any working path instead of lyxpipe can be used,
+ for example
\begin_inset Flex Code
status collapsed
\end_inset
' to create the pipes.
- If one of the pipes already exists, \SpecialChar LyX
+ If one of the pipes already exists,
+ \SpecialChar LyX
will assume that another \SpecialChar LyX
- process
- is already running and will not start the server.
- On POSIX (Unix like) systems, if for some other reason, an unused
+ process is already running and will not start the server.
+ On POSIX (Unix like) systems,
+ if for some other reason,
+ an unused
\begin_inset Quotes eld
\end_inset
\end_inset
pipe is left in existence when \SpecialChar LyX
- closes, then \SpecialChar LyX
+ closes,
+ then \SpecialChar LyX
will try to delete it.
- If this fails for some reason, you will need to delete the pipes manually
- and then restart \SpecialChar LyX
+ If this fails for some reason,
+ you will need to delete the pipes manually and then restart \SpecialChar LyX
.
- On Windows, pipes are deleted by the OS on program termination or crash,
+ On Windows,
+ pipes are deleted by the OS on program termination or crash,
so
\begin_inset Quotes eld
\end_inset
\begin_layout Standard
To have several \SpecialChar LyX
- processes with servers at the same time, you have to use
- different configurations, perhaps by using separate user directories, each
- with its own
+ processes with servers at the same time,
+ you have to use different configurations,
+ perhaps by using separate user directories,
+ each with its own
\begin_inset Flex Code
status collapsed
\end_inset
- file, for each process.
+ file,
+ for each process.
\end_layout
\begin_layout Standard
-If you are developing a client program, you might find it useful to enable
- debugging information from the \SpecialChar LyX
+If you are developing a client program,
+ you might find it useful to enable debugging information from the \SpecialChar LyX
server.
Do this by starting \SpecialChar LyX
as
\end_layout
\begin_layout Standard
-You can find a complete example client written in C++ in the source distribution
- as
+You can find a complete example client written in C++ in the source distribution as
\begin_inset Flex Code
status collapsed
\begin_layout Standard
To issue a \SpecialChar LyX
- call, the client writes a line of ASCII text into the input
- pipe.
+ call,
+ the client writes a line of ASCII text into the input pipe.
This line has the following format:
\end_layout
\begin_layout Description
clientname is a name that the client can choose arbitrarily.
Its only use is that \SpecialChar LyX
- will echo it if it sends an answer—so a client can
- dispatch results from different requesters.
+ will echo it if it sends an answer—
+so a client can dispatch results from different requesters.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-argument is an optional argument which is meaningful only to some functions
- (for instance, the
+argument is an optional argument which is meaningful only to some functions (for instance,
+ the
\begin_inset Quotes eld
\end_inset
\emph on
function
\emph default
- are just echoed from the command request, while
+ are just echoed from the command request,
+ while
\emph on
data
\emph default
- is more or less useful information filled according to how the command
- execution worked out.
- Some commands, such as
+ is more or less useful information filled according to how the command execution worked out.
+ Some commands,
+ such as
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, will return information about the internal state of \SpecialChar LyX
-, while other will
- return an empty data-response.
+,
+ will return information about the internal state of \SpecialChar LyX
+,
+ while other will return an empty data-response.
This means that the command execution went fine.
\end_layout
\begin_layout Standard
-In case of errors, the response from \SpecialChar LyX
+In case of errors,
+ the response from \SpecialChar LyX
will have this form
\end_layout
\begin_layout Standard
Since \SpecialChar LyX
- 2.1, \SpecialChar LyX
- supports basic interactions with AppleScript for normal communicatio
-n through the command run.
+ 2.1,
+ \SpecialChar LyX
+ supports basic interactions with AppleScript for normal communication through the command run.
This command takes a direct argument (the
\series bold
function
\series default
to perform) and an optional argument.
- It either returns the output of the function or triggers an error with
- the error message and code.
+ It either returns the output of the function or triggers an error with the error message and code.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout LyX-Code
- display dialog "Error: " & the error_number & ".
+ display dialog "Error:
+ " & the error_number & ".
" ¬
\end_layout
\begin_layout Standard
\SpecialChar LyX
can notify clients of events going on asynchronously.
- Currently it will only do this if the user binds a key sequence with the
- function
+ Currently it will only do this if the user binds a key sequence with the function
\begin_inset Quotes eld
\end_inset
\emph on
key-sequence
\emph default
- is the printed representation of the key sequence that was actually typed
- by the user.
+ is the printed representation of the key sequence that was actually typed by the user.
\end_layout
\begin_layout Standard
\end_inset
.
- Then start a client that listens on the output pipe, dispatches the command
- according to the sequence, and starts a function that may use \SpecialChar LyX
- calls and
- \SpecialChar LyX
+ Then start a client that listens on the output pipe,
+ dispatches the command according to the sequence,
+ and starts a function that may use \SpecialChar LyX
+ calls and \SpecialChar LyX
requests to issue a command or a series of commands to \SpecialChar LyX
.
\end_layout
\begin_inset Quotes erd
\end_inset
- is received from a client, \SpecialChar LyX
- will report back to inform the client that
- it's listening to it's messages, while
+ is received from a client,
+ \SpecialChar LyX
+ will report back to inform the client that it's listening to it's messages,
+ while
\begin_inset Quotes eld
\end_inset
status collapsed
\begin_layout Plain Layout
-The following viewers offer the reverse PDF search feature: Okular on KDE/Linux,
- Qpdfview on Unix, Skim on Mac OSX and SumatraPDF on Windows.
+The following viewers offer the reverse PDF search feature:
+ Okular on KDE/Linux,
+ Qpdfview on Unix,
+ Skim on Mac OSX and SumatraPDF on Windows.
\end_layout
\end_inset
\emph default
).
This means that you can tell \SpecialChar LyX
- to put the cursor to a specific line in the
- document by clicking at the respective position in the DVI/PDF output.
- To achieve this, the viewer must be able to communicate with \SpecialChar LyX
+ to put the cursor to a specific line in the document by clicking at the respective position in the DVI/PDF output.
+ To achieve this,
+ the viewer must be able to communicate with \SpecialChar LyX
.
This is done via the \SpecialChar LyX
server either by using the named pipe (
\emph on
lyxpipe
\emph default
-), or the UNIX domain socket (
+),
+ or the UNIX domain socket (
\emph on
lyxsocket
\emph default
program communicates with \SpecialChar LyX
).
- In some cases, you need a helper script that mediates between the viewer
- and \SpecialChar LyX
-, in others, the viewer can communicate with \SpecialChar LyX
+ In some cases,
+ you need a helper script that mediates between the viewer and \SpecialChar LyX
+,
+ in others,
+ the viewer can communicate with \SpecialChar LyX
directly.
This depends on the selected viewer and on your operating system.
- The same applies to the way viewers need to be configured and the way the
- reverse search is actually performed.
- In what follows, we will thus describe how to setup reverse search for
- specific viewers.
- Before we turn to this, though, we will explain what needs to be done generally
- to enable reverse search in the DVI/PDF output.
+ The same applies to the way viewers need to be configured and the way the reverse search is actually performed.
+ In what follows,
+ we will thus describe how to setup reverse search for specific viewers.
+ Before we turn to this,
+ though,
+ we will explain what needs to be done generally to enable reverse search in the DVI/PDF output.
\end_layout
\begin_layout Subsection
\begin_layout Standard
In most cases \SpecialChar LyX
- will do the work for you by pressing the following button
- in the toolbar:
+ will do the work for you by pressing the following button in the toolbar:
+
\begin_inset Info
type "icon"
arg "buffer-toggle-output-sync"
\end_inset
.
- Alternatively, you can also enable the feature by checking
+ Alternatively,
+ you can also enable the feature by checking
\family sans
Synchronize with Output
\family default
.
In such a case \SpecialChar LyX
will automatically insert the necessary Sync\SpecialChar TeX
- macro (for
- PDF) or load the srcltx package (for DVI) respectively.
+ macro (for PDF) or load the srcltx package (for DVI) respectively.
This option can be easily reached also on
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-If you need a different setting, you can select or input a custom macro
- from the drop down box just below
+If you need a different setting,
+ you can select or input a custom macro from the drop down box just below
\begin_inset Flex Noun
status collapsed
\end_inset
enables gzip compression.
- If your viewer does not support it, you should instead use
+ If your viewer does not support it,
+ you should instead use
\begin_inset Flex Code
status collapsed
\end_inset
sometimes has an undesired impact on the typesetting.
- Thus, you should switch output synchronization off for the final typesetting
- if you use the
+ Thus,
+ you should switch output synchronization off for the final typesetting if you use the
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-In case you need some more special settings that are not covered by the
- automatic settings, read the next section about how to set up output synchroniz
-ation manually.
- If the automatic setup suits your needs, you can readily jump to section
+In case you need some more special settings that are not covered by the automatic settings,
+ read the next section about how to set up output synchronization manually.
+ If the automatic setup suits your needs,
+ you can readily jump to section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:configuring-viewers"
+nolink "false"
\end_inset
-, where the necessary configuration steps in your viewer – needed both with
- the automatic and the manual setup – are described.
+,
+ where the necessary configuration steps in your viewer – needed both with the automatic and the manual setup – are described.
\end_layout
\begin_layout Subsection
\end_inset
- program, some are provided by external packages.
+ program,
+ some are provided by external packages.
Your choice depends on whether your \SpecialChar LaTeX
- distribution already provides a given
- method (the built-in methods are rather new) and whether your viewer can
- cope with it.
+ distribution already provides a given method (the built-in methods are rather new) and whether your viewer can cope with it.
The available methods are described in the following.
\end_layout
\end_layout
\begin_layout Standard
-This method provides the DVI file with the necessary information for reverse
- search.
+This method provides the DVI file with the necessary information for reverse search.
It is available in \SpecialChar LaTeX
since quite some time (any somewhat recent \SpecialChar LaTeX
- distribution
- should include it), and it works reliably.
- To enable it, change the
+ distribution should include it),
+ and it works reliably.
+ To enable it,
+ change the
\begin_inset Flex Noun
status collapsed
\end_inset
.
- If this doesn't work, check if your \SpecialChar TeX
- engine needs different options (the
- syntax might differ in some distributions).
+ If this doesn't work,
+ check if your \SpecialChar TeX
+ engine needs different options (the syntax might differ in some distributions).
\end_layout
\begin_layout Subsubsection*
\emph default
provide reverse search facility for PDF output (via pdflatex) and DVI output,
respectively.
- In order to enable it, load the packages in the \SpecialChar LyX
- preamble:
+ In order to enable it,
+ load the packages in the \SpecialChar LyX
+ preamble:
+
\end_layout
\begin_layout Itemize
\end_layout
\begin_layout Standard
-If you want to be able to perform both DVI and PDF reverse searches, you
- can also insert in the preamble the following lines
+If you want to be able to perform both DVI and PDF reverse searches,
+ you can also insert in the preamble the following lines
\end_layout
\begin_layout LyX-Code
\end_layout
\begin_layout Standard
-This way, you can preview the file as either DVI or PDF (pdflatex) and the
- right package will be used.
+This way,
+ you can preview the file as either DVI or PDF (pdflatex) and the right package will be used.
\end_layout
\begin_layout Standard
Sync\SpecialChar TeX
\emph default
- facility is basically the result of the integration of the PDFSync package
- to the pdftex program and its merge with the
+ facility is basically the result of the integration of the PDFSync package to the pdftex program and its merge with the
\emph on
scr-specials
\emph default
approach.
You need at least \SpecialChar TeX
Live 2008 or a recent Mik\SpecialChar TeX
- distribution in order to use
- it.
+ distribution in order to use it.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-For some reason, Mik\SpecialChar TeX
+For some reason,
+ Mik\SpecialChar TeX
does not understand/obey the command \SpecialChar LyX
- inserts into
- the preamble when you check the "Enable Forward/Reverse Search" button
- in the toolbar and does not generate the necessary info.
+ inserts into the preamble when you check the "Enable Forward/Reverse Search" button in the toolbar and does not generate the necessary info.
\end_layout
\begin_layout Plain Layout
-The generation of the required info can be forced by changing the converter
- "\SpecialChar LaTeX
- (pdflatex) -> PDF (pdflatex)" in Preferences->File handling->Converters
- from the default "pdflatex $$i" to "pdflatex -synctex=1 $$i" (i.e., by adding
- the -synctex=1 switch).
+The generation of the required info can be forced by changing the converter "\SpecialChar LaTeX
+ (pdflatex) -> PDF (pdflatex)" in Preferences->File handling->Converters from the default "pdflatex $$i" to "pdflatex -synctex=1 $$i" (i.e.,
+ by adding the -synctex=1 switch).
\end_layout
\end_inset
Also note that only a few PDF viewers (such as Okular and Qpdfview on Unix,
- Skim on the Mac, SumatraPDF on Windows; see the next section for details)
- already provide Sync\SpecialChar TeX
+ Skim on the Mac,
+ SumatraPDF on Windows;
+ see the next section for details) already provide Sync\SpecialChar TeX
support.
\end_layout
\begin_layout Standard
To enable Sync\SpecialChar TeX
- for DVI output, change the
+ for DVI output,
+ change the
\begin_inset Flex Noun
status collapsed
\end_inset
-, and for PDF output, change the
+,
+ and for PDF output,
+ change the
\begin_inset Flex Noun
status collapsed
\end_inset
.
- Should your viewer not be considered in the following description, or in
- case of missing success, please check the documentation of your viewer
- whether the viewer needs to be configured for the use with Sync\SpecialChar TeX
+ Should your viewer not be considered in the following description,
+ or in case of missing success,
+ please check the documentation of your viewer whether the viewer needs to be configured for the use with Sync\SpecialChar TeX
.
\begin_inset Foot
status collapsed
\end_inset
option enables gzip compression.
- If your viewer does not support it, you should instead use
+ If your viewer does not support it,
+ you should instead use
\begin_inset Flex Code
status collapsed
\end_inset
-, you don't need to do anything else for performing a reverse DVI search,
+,
+ you don't need to do anything else for performing a reverse DVI search,
as \SpecialChar LyX
already provides the necessary hooks for automatically using the
\begin_inset Flex Code
\end_inset
program.
- Just setup your document as described above (reverse search is triggered
- by Ctrl-click or Alt-click on Mac OSX, respectively).
+ Just setup your document as described above (reverse search is triggered by Ctrl-click or Alt-click on Mac OSX,
+ respectively).
\end_layout
\begin_layout Standard
-However, if for whatever reason you want to use the named pipe instead of
- the socket for communicating with \SpecialChar LyX
-, simply change the DVI viewer in
+However,
+ if for whatever reason you want to use the named pipe instead of the socket for communicating with \SpecialChar LyX
+,
+ simply change the DVI viewer in
\begin_inset Flex Noun
status collapsed
\end_inset
-, where
+,
+ where
\begin_inset Flex Code
status collapsed
\end_inset
is a suitable script.
- For example, a minimal shell script is the following one:
+ For example,
+ a minimal shell script is the following one:
\end_layout
\begin_layout LyX-Code
\end_inset
-, add the following lines:
+,
+ add the following lines:
\end_layout
\begin_layout LyX-Code
\begin_layout Standard
Modify the lines accordingly if you install \SpecialChar LyX
- somewhere else than in the
- Applications folder.
+ somewhere else than in the Applications folder.
\end_layout
\begin_layout Standard
\end_inset
-, and then in
+,
+ and then in
\begin_inset Flex Noun
status collapsed
\end_layout
\begin_layout Standard
-Reverse search with evince does not work out of the box, but it can be achieved
- by means of some third party helper scripts.
+Reverse search with evince does not work out of the box,
+ but it can be achieved by means of some third party helper scripts.
Please refer to
\begin_inset CommandInset href
LatexCommand href
\begin_inset space \thinspace{}
\end_inset
-e., the hand symbol is clicked).
+e.,
+ the hand symbol is clicked).
\change_unchanged
\end_layout
\end_inset
-, click on the input field of the
+,
+ click on the input field of the
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Standard
-Reverse search is triggered by double-click or, in more recent versions,
+Reverse search is triggered by double-click or,
+ in more recent versions,
by context menu.
\end_layout
\end_layout
\begin_layout Standard
-Launch yap, choose its
+Launch yap,
+ choose its
\begin_inset Flex Noun
status collapsed
\begin_inset Quotes erd
\end_inset
- button and, in the window that opens, enter
+ button and,
+ in the window that opens,
+ enter
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- to open a file dialog and navigate to the directory containing the batch
- file
+ to open a file dialog and navigate to the directory containing the batch file
\begin_inset Flex Code
status collapsed
\end_inset
-, otherwise change the
+,
+ otherwise change the
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-In yap, reverse search is triggered by double-click.
+In yap,
+ reverse search is triggered by double-click.
\end_layout
\begin_layout Subsubsection*
\end_layout
\begin_layout Standard
-In order to use SumatraPDF for inverse search, enter
+In order to use SumatraPDF for inverse search,
+ enter
\begin_inset Flex Code
status collapsed
\end_inset
-, where
+,
+ where
\begin_inset Flex Code
status collapsed
\end_inset
is the previous wrapper.
- If SumatraPDF.exe is not in your command PATH, use its full file name.
+ If SumatraPDF.exe is not in your command PATH,
+ use its full file name.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-First of all, make sure that yap is your default DVI viewer in the Windows
- environment, then launch it, choose its
+First of all,
+ make sure that yap is your default DVI viewer in the Windows environment,
+ then launch it,
+ choose its
\begin_inset Flex Noun
status collapsed
\begin_inset Quotes erd
\end_inset
- button and, in the window that opens, enter
+ button and,
+ in the window that opens,
+ enter
\begin_inset Quotes eld
\end_inset
\end_inset
.
- In this way, you will be using the
+ In this way,
+ you will be using the
\emph on
lyxsocket
\emph default
for communicating with \SpecialChar LyX
.
- If, for whatever reason, you want to use the
+ If,
+ for whatever reason,
+ you want to use the
\emph on
lyxpipe
\emph default
-, omit the
+,
+ omit the
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-In yap, reverse search is triggered by double-click.
+In yap,
+ reverse search is triggered by double-click.
\end_layout
\begin_layout Subsubsection*
\end_layout
\begin_layout Standard
-In order to use SumatraPDF for inverse search, enter
+In order to use SumatraPDF for inverse search,
+ enter
\begin_inset Flex Code
status collapsed
\end_inset
.
- If SumatraPDF.exe is not in your command PATH, use its full posix path.
+ If SumatraPDF.exe is not in your command PATH,
+ use its full posix path.
The
\begin_inset Flex Code
status collapsed
lyxsocket
\emph default
.
- Again, omit the
+ Again,
+ omit the
\begin_inset Flex Code
status collapsed
\emph on
lyxpipe
\emph default
-, and be sure to specify the \SpecialChar LyX
+,
+ and be sure to specify the \SpecialChar LyX
Server pipe path in the \SpecialChar LyX
preferences.
\end_layout
\end_layout
\begin_layout Standard
-Forward search is, as the name implies, in a sense the
+Forward search is,
+ as the name implies,
+ in a sense the
\begin_inset Quotes eld
\end_inset
of reverse search.
It allows you to let the viewer jump to a given position from within \SpecialChar LyX
.
- If forward search is set up (as described in what follows), you can put
- the cursor anywhere in your \SpecialChar LyX
- document, and hit
+ If forward search is set up (as described in what follows),
+ you can put the cursor anywhere in your \SpecialChar LyX
+ document,
+ and hit
\begin_inset Flex Noun
status collapsed
\end_inset
- in the context menu via right mouse click), and then the viewer will jump
- to that position as well.
- This implies, of course, that your viewer supports this function.
+ in the context menu via right mouse click),
+ and then the viewer will jump to that position as well.
+ This implies,
+ of course,
+ that your viewer supports this function.
\end_layout
\begin_layout Standard
-To make forward search possible, you first need to provide the generated
- output PDF/DVI file with additional information about the \SpecialChar TeX
+To make forward search possible,
+ you first need to provide the generated output PDF/DVI file with additional information about the \SpecialChar TeX
sources.
This can be done via the methods described in the section
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:rev-search"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-Additionally, you need to configure \SpecialChar LyX
+Additionally,
+ you need to configure \SpecialChar LyX
for using your viewers in
\begin_inset Flex Noun
status collapsed
\end_inset
.
- We provide a range of tested configurations for some viewers, which you
- can select from the drop down list.
- If none of these configurations suits you, you have to find out and enter
- a suitable configuration yourself.
+ We provide a range of tested configurations for some viewers,
+ which you can select from the drop down list.
+ If none of these configurations suits you,
+ you have to find out and enter a suitable configuration yourself.
The definition syntax uses the following placeholders:
\end_layout
\end_inset
-: row number
+:
+ row number
\end_layout
\begin_layout Itemize
\end_inset
-: name of the (temporary) exported .tex file (without path)
+:
+ name of the (temporary) exported .tex file (without path)
\end_layout
\begin_layout Itemize
\end_inset
-: name of the (temporary) exported .tex file (including path)
+:
+ name of the (temporary) exported .tex file (including path)
\end_layout
\begin_layout Itemize
\end_inset
-: name of the exported output file (either dvi or pdf, depending on which
- one exists in the temporary directory)
+:
+ name of the exported output file (either dvi or pdf,
+ depending on which one exists in the temporary directory)
\end_layout
\begin_layout Standard
-Note that only some of the viewers provide full and usable forward search
- functionality out of the box, among them yap, xdvi, okular
+Note that only some of the viewers provide full and usable forward search functionality out of the box,
+ among them yap,
+ xdvi,
+ okular
\begin_inset Foot
status collapsed
\end_inset
-, qpdfview, and SumatraPDF
+,
+ qpdfview,
+ and SumatraPDF
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-SumatraPDF can also use DDE commands through the external program CMCDDE
- — downloadable from
+SumatraPDF can also use DDE commands through the external program CMCDDE —
+ downloadable from
\begin_inset CommandInset href
LatexCommand href
target "http://www.istri.fr/spip/zip/CMCDDE.zip"
\end_inset
.
- Others, such as evince
+ Others,
+ such as evince
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-Forward search with evince can be achieved by means of third party helper
- scripts.
+Forward search with evince can be achieved by means of third party helper scripts.
Please refer to
\begin_inset CommandInset href
LatexCommand href
\end_inset
-, require some extra tools in order to use forward search.
- While many of the widespread PDF viewers (most notably Adobe Reader) do
- not support forward search at all, some other viewers – e.
+,
+ require some extra tools in order to use forward search.
+ While many of the widespread PDF viewers (most notably Adobe Reader) do not support forward search at all,
+ some other viewers – e.
\begin_inset space \thinspace{}
\end_inset
g.
- xpdf – allow at least to reload the document and jump to a specific page
- of the file, so you can at least navigate
+ xpdf – allow at least to reload the document and jump to a specific page of the file,
+ so you can at least navigate
\begin_inset Quotes eld
\end_inset
\end_inset
.
- This latter functionality is provided by an external call of synctex (see
- the predefined example configurations).
+ This latter functionality is provided by an external call of synctex (see the predefined example configurations).
\end_layout
\begin_inset space \thinspace{}
\end_inset
-e., which format is already there in the temporary directory) and chooses
- the appropriate configuration for the respective format.
+e.,
+ which format is already there in the temporary directory) and chooses the appropriate configuration for the respective format.
\change_deleted 564990737 1672743015
\end_layout
\change_deleted 564990737 1669742044
This section describes how \SpecialChar LyX
- can be used to write articles for submission
- to the scientific journal
+ can be used to write articles for submission to the scientific journal
\emph on
Astronomy and Astrophysics
\emph default
\begin_layout Standard
\change_deleted 564990737 1669742044
-A manual comes together with that package, and this text is not meant to
- replace the original manual but is merely a short guide in how to realize
- the correct form of your paper.
+A manual comes together with that package,
+ and this text is not meant to replace the original manual but is merely a short guide in how to realize the correct form of your paper.
\end_layout
\begin_layout Standard
\change_deleted 564990737 1669742044
-Please note that the publisher of the journal was changed from Springer
- to EDP Sciences starting January 1, 2001.
- That change involved also some slight changes to the style files, namely
- the removal of the thesaurus command.
+Please note that the publisher of the journal was changed from Springer to EDP Sciences starting January 1,
+ 2001.
+ That change involved also some slight changes to the style files,
+ namely the removal of the thesaurus command.
The \SpecialChar LyX
- class aa supports the newest version of these style files, V 5.01.
- If you have an older version installed, please upgrade.
- For compatibility, the old (version 4) layout has been kept as
+ class aa supports the newest version of these style files,
+ V 5.01.
+ If you have an older version installed,
+ please upgrade.
+ For compatibility,
+ the old (version 4) layout has been kept as
\family sans
article (A&A V4)
\family default
\change_deleted 564990737 1669742044
It is recommended you start from the example template distributed with \SpecialChar LyX
.
- If you are not using a template, note the following settings:
+ If you are not using a template,
+ note the following settings:
\end_layout
\begin_layout Itemize
Document\SpecialChar menuseparator
Settings
\family default
- dialog (OK, that one was obvious).
+ dialog (OK,
+ that one was obvious).
\end_layout
\begin_layout Itemize
style
\family default
-: Leave it set to
+:
+ Leave it set to
\family sans
default
\family default
.
- The whole layout is done by the macros, you shouldn't change anything.
+ The whole layout is done by the macros,
+ you shouldn't change anything.
\end_layout
\begin_layout Standard
\change_deleted 564990737 1669742044
First thing to enter is the header information.
- It consists of seven entries, of which some are optional.
+ It consists of seven entries,
+ of which some are optional.
They are
\end_layout
\family sans
Title
\family default
-: [required]
+:
+ [required]
\end_layout
\begin_layout Itemize
\family sans
Subtitle
\family default
-: [optional]
+:
+ [optional]
\end_layout
\begin_layout Itemize
\family sans
Author
\family default
-: [required]
+:
+ [required]
\end_layout
\begin_layout Itemize
\family sans
Address
\family default
-: [required]
+:
+ [required]
\end_layout
\begin_layout Itemize
\family sans
Offprints
\family default
-: [optional] if more than one author: whom to contact for offprint requests.
+:
+ [optional] if more than one author:
+ whom to contact for offprint requests.
\end_layout
\begin_layout Itemize
\family sans
Mail
\family default
-: [optional] mail address for contacts.
+:
+ [optional] mail address for contacts.
\end_layout
\begin_layout Itemize
\family sans
Date
\family default
-: [required].
+:
+ [required].
Suggested format is
\family typewriter
-Received: <date>; Accepted <date>
+Received:
+ <date>;
+ Accepted <date>
\end_layout
\begin_layout Standard
\backslash
maketitle
\family default
- command, this is done automatically by \SpecialChar LyX
+ command,
+ this is done automatically by \SpecialChar LyX
when the header is finished.
- Although the order of the single header entries doesn't matter it is advised
- to keep the above sequence, just to get the best optics and meets the layout
- of the real document.
+ Although the order of the single header entries doesn't matter it is advised to keep the above sequence,
+ just to get the best optics and meets the layout of the real document.
\end_layout
\begin_layout Standard
\change_deleted 564990737 1669742044
-If you want to place footnotes in the header block, e.
+If you want to place footnotes in the header block,
+ e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \space{}
\end_inset
-to state your present address, just use the standard footnote via the menu
-
+to state your present address,
+ just use the standard footnote via the menu
\family sans
Insert\SpecialChar menuseparator
Footnote.
Edit\SpecialChar menuseparator
Text Style
\family default
-, you'll find two insets which are relevant for the titling:
+,
+ you'll find two insets which are relevant for the titling:
\end_layout
\begin_layout Itemize
\family sans
Address
\family default
- field, so you have to put a marker to each author.
+ field,
+ so you have to put a marker to each author.
\end_layout
\begin_layout Itemize
\begin_layout Standard
\change_deleted 564990737 1669742044
-In addition to these topics, the macros use one additional \SpecialChar LaTeX
- command that
- has no counterpart in \SpecialChar LyX
+In addition to these topics,
+ the macros use one additional \SpecialChar LaTeX
+ command that has no counterpart in \SpecialChar LyX
:
\end_layout
\backslash
and
\family default
- to separate different names for more than one author and institute, respectivel
-y.
+ to separate different names for more than one author and institute,
+ respectively.
\end_layout
\begin_layout Standard
\change_deleted 564990737 1669742044
The abstract should immediately follow the header block.
- With version 5 the abstract environment was changed to a command, and there
- is now a restriction to only one paragraph.
- In addition, it should contain an entry with the keywords.
+ With version 5 the abstract environment was changed to a command,
+ and there is now a restriction to only one paragraph.
+ In addition,
+ it should contain an entry with the keywords.
This is done via the paragraph style
\family sans
Keywords
\begin_layout Standard
\change_deleted 564990737 1669742044
-The A&A paper layout supports the following environments for structuring
- your text:
+The A&A paper layout supports the following environments for structuring your text:
\end_layout
\begin_layout Itemize
layout for \SpecialChar LyX
.
Some have already been mentioned.
- For the sake of completeness, they are listed all together here:
+ For the sake of completeness,
+ they are listed all together here:
\end_layout
\begin_layout Itemize
\begin_layout Standard
\change_deleted 564990737 1669742044
-If you want to use any of these commands, you have to enter them yourself.
+If you want to use any of these commands,
+ you have to enter them yourself.
\series bold
Do not forget to mark them as \SpecialChar LaTeX
\SpecialChar LyX
provides support for the necessary float environments
\family sans
-figure, figure*, table
+figure,
+ figure*,
+ table
\family default
and
\family sans
table*
\family default
-, therefore we won't tell much about it here.
+,
+ therefore we won't tell much about it here.
Refer to the
\emph on
User's
\emph default
.
Just remember that tables should be left-aligned.
- For that, select the table and change the alignment in
+ For that,
+ select the table and change the alignment in
\family sans
Edit\SpecialChar menuseparator
Paragraph
\begin_layout Standard
\change_deleted 564990737 1669742044
-There is only one special thing: the figures with caption besides the figure.
- To create such a figure, you have to do the following:
+There is only one special thing:
+ the figures with caption besides the figure.
+ To create such a figure,
+ you have to do the following:
\end_layout
\begin_layout Enumerate
\change_deleted 564990737 1669742044
-Create a wide figure float:
+Create a wide figure float:
+
\family sans
Insert\SpecialChar menuseparator
Float\SpecialChar menuseparator
Figure
\family default
-, then right click in the figure and select
+,
+ then right click in the figure and select
\family sans
Span
\begin_inset space ~
\begin_layout Enumerate
\change_deleted 564990737 1669742044
-Position the cursor behind the figure and insert a horizontal fill:
+Position the cursor behind the figure and insert a horizontal fill:
+
\family sans
Insert\SpecialChar menuseparator
Special
\change_deleted 564990737 1669742044
Switch to \SpecialChar LaTeX
- mode:
+ mode:
+
\family sans
M-c
\begin_inset space ~
\begin_layout Enumerate
\change_deleted 564990737 1669742044
-Position the cursor behind the caption text, switch to \SpecialChar LaTeX
- mode and insert
- the closing brace:
+Position the cursor behind the caption text,
+ switch to \SpecialChar LaTeX
+ mode and insert the closing brace:
+
\family sans
M-c
\begin_inset space ~
\begin_layout Standard
\change_deleted 564990737 1669742044
-Also, refer to the figures in the example paper.
+Also,
+ refer to the figures in the example paper.
\end_layout
\begin_layout Standard
\begin_layout Standard
\change_deleted 564990737 1669742044
-For submission, the paper has to be formated in a special double-spacing
- layout.
- For this purpose, you have to give the option
+For submission,
+ the paper has to be formated in a special double-spacing layout.
+ For this purpose,
+ you have to give the option
\family typewriter
referee
\family default
\family default
directory contains an example paper written with \SpecialChar LyX
.
- It is the example paper from the original macro package, translated to
- \SpecialChar LyX
+ It is the example paper from the original macro package,
+ translated to \SpecialChar LyX
.
- Use it for inspiration, and compare the original \SpecialChar LaTeX
+ Use it for inspiration,
+ and compare the original \SpecialChar LaTeX
code with \SpecialChar LyX
way of writing.
\end_layout
\begin_layout Standard
\change_deleted 564990737 1669755802
-The ijmpc package is a set of macros that facilitates electronic manuscript
- submission to the
+The ijmpc package is a set of macros that facilitates electronic manuscript submission to the
\emph on
International Journal of Modern Physics C
\emph default
.
- Similarly, the ijmpd package is for creating manuscripts to be submitted
- to the
+ Similarly,
+ the ijmpd package is for creating manuscripts to be submitted to the
\emph on
International Journal of Modern Physics D
\emph default
\family typewriter
ws-ijmpd.cls
\family default
-, respectively.
- These files, together with instructions for the authors, can be downloaded
- from the sites
+,
+ respectively.
+ These files,
+ together with instructions for the authors,
+ can be downloaded from the sites
\begin_inset Flex URL
status collapsed
\begin_inset Quotes erd
\end_inset
- package, and they are almost (but not exactly) identical.
+ package,
+ and they are almost (but not exactly) identical.
Most of their features are supported by \SpecialChar LyX
.
I have used \SpecialChar LyX
- successfully to write articles submitted to both journals
- without any problem.
+ successfully to write articles submitted to both journals without any problem.
\end_layout
\begin_layout Standard
\begin_layout Standard
\change_deleted 564990737 1669755802
-As usual, the easiest way to write a paper is to start with a template.
+As usual,
+ the easiest way to write a paper is to start with a template.
Click on
\family sans
File\SpecialChar menuseparator
\family sans
Template
\family default
-, then choose the
+,
+ then choose the
\family typewriter
ijmpc.lyx
\family default
ijmpd.lyx
\family default
template.
- This will give an (almost) empty document that includes the most common
- fields found in a manuscript.
- Simply overwrite the existing text (including the brackets,
+ This will give an (almost) empty document that includes the most common fields found in a manuscript.
+ Simply overwrite the existing text (including the brackets,
+
\family typewriter
<>
\family default
\change_deleted 564990737 1669755802
The language of the document should not be changed.
- Before previewing your paper, be sure that the babel package is not used.
- To do this, click on
+ Before previewing your paper,
+ be sure that the babel package is not used.
+ To do this,
+ click on
\begin_inset Info
type "menu"
arg "dialog-show document"
\SpecialChar menuseparator
Language
\family default
-, and select
+,
+ and select
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, which can be used to define classification codes, such as PACS numbers.
+,
+ which can be used to define classification codes,
+ such as PACS numbers.
Note that this facility is not supported by the ijmpd package.
\end_layout
\begin_layout Enumerate
\change_deleted 564990737 1669755802
-Several new environments are available:
+Several new environments are available:
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
.
Their use is more or less obvious.
\SpecialChar LyX
- supports all these environments; it will use the proper label, text style,
+ supports all these environments;
+ it will use the proper label,
+ text style,
and numbering scheme for each of them.
\end_layout
\begin_layout Enumerate
\change_deleted 564990737 1669755802
-Both packages use basic citations; the natbib package should not be used.
+Both packages use basic citations;
+ the natbib package should not be used.
In \SpecialChar LyX
-, citation references are shown as usual; in the output, citations are
- shown as superscripts.
- If you want to use a citation as normal text, you should use the
+,
+ citation references are shown as usual;
+ in the output,
+ citations are shown as superscripts.
+ If you want to use a citation as normal text,
+ you should use the
\family typewriter
refcite
\family default
- command, e.
+ command,
+ e.
\begin_inset space \thinspace{}
\end_inset
\end_inset
section in both packages.
- To put acknowledgments, just use the
+ To put acknowledgments,
+ just use the
\begin_inset Quotes eld
\end_inset
\begin_layout Enumerate
\change_deleted 564990737 1669755802
-Appendices may be added to the paper,
+Appendices may be added to the paper,
+
\emph on
after
\emph default
\shape default
the References.
\SpecialChar LyX
- provides a special environment, called
+ provides a special environment,
+ called
\begin_inset Quotes eld
\end_inset
\end_inset
which marks the beginning of the appendices.
- This environment should be left blank; it just sends a \SpecialChar LaTeX
- command, but nothing
- is really printed.
+ This environment should be left blank;
+ it just sends a \SpecialChar LaTeX
+ command,
+ but nothing is really printed.
In \SpecialChar LyX
-, the word
+,
+ the word
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- is printed with blue letters, as a signal that all sections after that
- point are appendices.
- To write an appendix, use the
+ is printed with blue letters,
+ as a signal that all sections after that point are appendices.
+ To write an appendix,
+ use the
\begin_inset Quotes eld
\end_inset
environment.
\SpecialChar LyX
- will number each appendix with capital letters, as required by both journals.
+ will number each appendix with capital letters,
+ as required by both journals.
Note that
\begin_inset Quotes eld
\end_inset
\emph on
must
\emph default
- be present before the first appendix; if not, all appendices will be numbered
- as normal sections in the output.
+ be present before the first appendix;
+ if not,
+ all appendices will be numbered as normal sections in the output.
\end_layout
\begin_layout Enumerate
tbl
\family default
command to implement table captions.
- As a result, a table created by \SpecialChar LyX
- is printed correctly, but its caption
- is ignored.
- However, you can use some \SpecialChar TeX
- code to overcome this problem, so that captions
- are printed as expected.
- To do so, create a float table as usual, remove the caption, and replace
- it with the \SpecialChar TeX
+ As a result,
+ a table created by \SpecialChar LyX
+ is printed correctly,
+ but its caption is ignored.
+ However,
+ you can use some \SpecialChar TeX
+ code to overcome this problem,
+ so that captions are printed as expected.
+ To do so,
+ create a float table as usual,
+ remove the caption,
+ and replace it with the \SpecialChar TeX
code
\family typewriter
\emph default
}{
\family default
- (sic); you must also the \SpecialChar TeX
+ (sic);
+ you must also the \SpecialChar TeX
code
\family typewriter
}
\family default
immediately after the tabular material.
- Study the example table included in the template files to see how this
- trick is implemented.
- Alternatively, If you need table captions, you should implement the whole
- table float in a
+ Study the example table included in the template files to see how this trick is implemented.
+ Alternatively,
+ If you need table captions,
+ you should implement the whole table float in a
\family typewriter
.tex
\family default
- file, then include this file to the \SpecialChar LyX
+ file,
+ then include this file to the \SpecialChar LyX
document (
\family sans
Insert\SpecialChar menuseparator
\family typewriter
ws-ijmpd.tex
\family default
-, included in the corresponding packages.
+,
+ included in the corresponding packages.
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
Actually you have the choice between \SpecialChar LaTeX
(plain) and pdflatex.
- If you intend to use pdflatex to prepare the paper, you should use the
- pdflatex option so that included graphics are converted to PDF format,
+ If you intend to use pdflatex to prepare the paper,
+ you should use the pdflatex option so that included graphics are converted to PDF format,
ready for use by pdflatex.
\end_layout
\end_inset
-, then make the following changes to the resulting
+,
+ then make the following changes to the resulting
\family typewriter
.tex
\family default
\backslash
makeatother
\family default
- commands, except for any commands you specifically put into the \SpecialChar LaTeX
+ commands,
+ except for any commands you specifically put into the \SpecialChar LaTeX
preamble.
\end_layout
\begin_layout Standard
\change_deleted 564990737 1669801478
-The iopart package provides a document class to create electronic manuscript
- submission to the journals published by the Institute of Physics.
- Instructions for the authors how to create a paper using the iopart class
- can be downloaded together with the iopart package from the site
+The iopart package provides a document class to create electronic manuscript submission to the journals published by the Institute of Physics.
+ Instructions for the authors how to create a paper using the iopart class can be downloaded together with the iopart package from the site
\begin_inset Flex URL
status collapsed
\begin_layout Itemize
\change_deleted 564990737 1669801478
-To be able to compile your document to a PDF, PS, or DVI, ensure that the
- no AMS packages are loaded in
+To be able to compile your document to a PDF,
+ PS,
+ or DVI,
+ ensure that the no AMS packages are loaded in
\family sans
Document\SpecialChar menuseparator
Settings\SpecialChar menuseparator
which is not directly supported by \SpecialChar LyX
.
This can be used as \SpecialChar TeX
- code when your document doesn't fit into one of the
- other title types.
+ code when your document doesn't fit into one of the other title types.
\end_layout
\begin_layout Standard
\begin_layout Standard
\change_deleted 564990737 1670317155
-The Kluwer package is a set of macros produced by Kluwer Academic Publishers
- that facilitates electronic manuscript submission to the journals they
- publish.
+The Kluwer package is a set of macros produced by Kluwer Academic Publishers that facilitates electronic manuscript submission to the journals they publish.
Most known of them (at least in my domain of interest) are
\emph on
Astrophysics and Space Science
\emph on
Solar Physics
\emph default
-, but there are many others (see a complete list at
+,
+ but there are many others (see a complete list at
\begin_inset Flex URL
status collapsed
\end_inset
.
- A complete user guide is contained in that package (but it can also be
- downloaded separately).
+ A complete user guide is contained in that package (but it can also be downloaded separately).
\end_layout
\begin_layout Standard
\change_deleted 564990737 1670317155
\SpecialChar LyX
supports many features of the package but not everything.
- However, the \SpecialChar TeX
+ However,
+ the \SpecialChar TeX
code needed is reduced to some
\begin_inset Quotes eld
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:kluwer_peculiarities"
+nolink "false"
\end_inset
\family sans
Template
\family default
-, then choose the
+,
+ then choose the
\family typewriter
kluwer.lyx
\family default
template.
- This will give an (almost) empty document that includes the most common
- fields found in a manuscript and a short description of their use.
- As in most templates, simply overwrite the existing text (including the
- brackets,
+ This will give an (almost) empty document that includes the most common fields found in a manuscript and a short description of their use.
+ As in most templates,
+ simply overwrite the existing text (including the brackets,
+
\family typewriter
<>
\family default
\change_deleted 564990737 1670317155
As in the AAS\SpecialChar TeX
- package, before you submit your paper to a journal you must
-
+ package,
+ before you submit your paper to a journal you must
\begin_inset Quotes eld
\end_inset
\change_deleted 564990737 1670317155
Export your paper as a \SpecialChar LaTeX
file.
- To do this, click on
+ To do this,
+ click on
\family sans
File\SpecialChar menuseparator
Export\SpecialChar menuseparator
\backslash
makeatother
\family default
- commands, except for any commands you specifically put into the \SpecialChar LaTeX
+ commands,
+ except for any commands you specifically put into the \SpecialChar LaTeX
preamble.
\end_layout
\family typewriter
.dvi
\family default
- document using, e.
+ document using,
+ e.
\begin_inset space \thinspace{}
\end_inset
\family sans
xdvi
\family default
-, and check if everything is OK (it should, if you didn't make any mistake).
+,
+ and check if everything is OK (it should,
+ if you didn't make any mistake).
\end_layout
\begin_layout Standard
\end_inset
.
- Unfortunately, this environment cannot be omitted, even if you write just
- one article.
- Therefore, each article starts with the command
+ Unfortunately,
+ this environment cannot be omitted,
+ even if you write just one article.
+ Therefore,
+ each article starts with the command
\family typewriter
\backslash
begin{article}
\family default
- and, obviously, ends with the command
+ and,
+ obviously,
+ ends with the command
\family typewriter
\backslash
\family default
.
Although this can be implemented in \SpecialChar LyX
-, I didn't included it, since it looks
- ugly and can confuse the novice user.
- Therefore, you need to enter them directly and mark them as \SpecialChar LaTeX
- code (the
- well-known
+,
+ I didn't included it,
+ since it looks ugly and can confuse the novice user.
+ Therefore,
+ you need to enter them directly and mark them as \SpecialChar LaTeX
+ code (the well-known
\begin_inset Quotes eld
\end_inset
\begin_inset space \space{}
\end_inset
-title, subtitle, author, institution, running title, running author, abstract
- and keywords) must be included in an environment called
+title,
+ subtitle,
+ author,
+ institution,
+ running title,
+ running author,
+ abstract and keywords) must be included in an environment called
\begin_inset Quotes eld
\end_inset
.
This is not implemented in \SpecialChar LyX
-, so you must enter title, subtitle etc.
+,
+ so you must enter title,
+ subtitle etc.
\begin_inset space ~
\end_inset
\begin_layout Enumerate
\change_deleted 564990737 1670317155
-According to the user manual, the label of each bibliography item must be
- written as
+According to the user manual,
+ the label of each bibliography item must be written as
\family typewriter
\backslash
\end_inset
.
- If you start a new paper using this template you don't need to do anything
- special.
+ If you start a new paper using this template you don't need to do anything special.
Just
\end_layout
\change_deleted 564990737 1670317155
don't delete the \SpecialChar TeX
- code included in the template, and
+ code included in the template,
+ and
\end_layout
\begin_layout Enumerate
\change_deleted 564990737 1670317155
-copy the example bibliography item included in the template and modify it
- as necessary to enter new bibliography items.
+copy the example bibliography item included in the template and modify it as necessary to enter new bibliography items.
\end_layout
\begin_layout Standard
article
\family default
class.
- It provides similar functionality, but you might prefer this layout with
- sans serif sections, headings, and more.
+ It provides similar functionality,
+ but you might prefer this layout with sans serif sections,
+ headings,
+ and more.
\end_layout
\begin_layout Standard
\begin_layout Standard
\change_deleted 564990737 1671097446
-These are the layout files for some of the journal formats used by Springer
- Verlag and listed on
+These are the layout files for some of the journal formats used by Springer Verlag and listed on
\begin_inset Flex URL
status collapsed
\end_inset
-, where you should also go to fetch the class files (yes, these are \SpecialChar LaTeX2e
+,
+ where you should also go to fetch the class files (yes,
+ these are \SpecialChar LaTeX2e
now!).
- It is a modular system: the things common to all journals are implemented
- in
+ It is a modular system:
+ the things common to all journals are implemented in
\family typewriter
svjour.inc
\family default
-, which journal-specific layout files (such as, e.
+,
+ which journal-specific layout files (such as,
+ e.
\begin_inset space \thinspace{}
\end_inset
\begin_layout Standard
\change_deleted 564990737 1671097446
-This means that implementing support for any other Springer journal on this
- list is as simple as writing your own
+This means that implementing support for any other Springer journal on this list is as simple as writing your own
\family typewriter
sv
\family default
\family default
come with the standard \SpecialChar LyX
distribution.
- Install the relevant class file (downloaded from Springer) in a proper
- directory, reconfigure \SpecialChar LaTeX
+ Install the relevant class file (downloaded from Springer) in a proper directory,
+ reconfigure \SpecialChar LaTeX
(in the te\SpecialChar TeX
case by running
\family typewriter
texhash
\family default
-, as root if necessary — doesn't \SpecialChar LyX
- take care of this?), reconfigure \SpecialChar LyX
- and
- it should work.
+,
+ as root if necessary —
+ doesn't \SpecialChar LyX
+ take care of this?),
+ reconfigure \SpecialChar LyX
+ and it should work.
\end_layout
\begin_layout Standard
\begin_layout Standard
\change_deleted 564990737 1671097446
-A large number of theorem-like styles —
+A large number of theorem-like styles —
+
\family sans
-Claim, Conjecture,
+Claim,
+ Conjecture,
+
\family default
\family sans
\change_deleted 564990737 1671097446
\family sans
-Headnote, Dedication, Subtitle, Running_\SpecialChar LaTeX
-_Title, Author_Running, Institute,
- Mail, Offprints, Keywords, Acknowledgements, Acknowledgement
+Headnote,
+ Dedication,
+ Subtitle,
+ Running_\SpecialChar LaTeX
+_Title,
+ Author_Running,
+ Institute,
+ Mail,
+ Offprints,
+ Keywords,
+ Acknowledgements,
+ Acknowledgement
\family default
.
See the Springer class file documentation for details.
\emph on
Journal of Geodesy
\emph default
-:
+:
+
\family typewriter
svjog.layout
\family default
- — Martin Vermeer
+ —
+ Martin Vermeer
\end_layout
\begin_layout Itemize
\emph on
Probability Theory and Related Fields
\emph default
-:
+:
+
\family typewriter
svprobth.layout
\family default
- — Jean-Marc Lasgouttes
+ —
+ Jean-Marc Lasgouttes
\end_layout
\begin_layout Standard
\change_deleted 564990737 1671097446
-Add your own, it isn't so hard!
+Add your own,
+ it isn't so hard!
\end_layout
\begin_layout Standard
\family typewriter
ejour2.layout
\family default
-, which was again based on a tinkered-with version of an old \SpecialChar LaTeX
- 2.09 style
- file from Springer.
- All this, and the
+,
+ which was again based on a tinkered-with version of an old \SpecialChar LaTeX
+ 2.09 style file from Springer.
+ All this,
+ and the
\family typewriter
ejour2
\family default
- layout, are now defunct.
- Jean-Marc Lasgouttes helped out big in making me find my way around the
- \SpecialChar LyX
+ layout,
+ are now defunct.
+ Jean-Marc Lasgouttes helped out big in making me find my way around the \SpecialChar LyX
layout file mechanism.
\end_layout
\end_inset
-, you'll find in the
+,
+ you'll find in the
\family sans
Tools
\family default
- menu the entry:
+ menu the entry:
+
\family sans
Check
\begin_inset space ~
are sometimes non-intuitive,
and easy to forget.
The program runs over your \SpecialChar LaTeX
- file, checks the integrity of the file, and
- flags some common errors.
- In other technical words, it is
+ file,
+ checks the integrity of the file,
+ and flags some common errors.
+ In other technical words,
+ it is
\family typewriter
lint
\family default
\end_layout
\begin_layout Standard
-Well, what is a syntax checker doing in \SpecialChar LyX
- which is supposed to produce correct
- \SpecialChar LaTeX
- anyways? The answer is simple: Just as
+Well,
+ what is a syntax checker doing in \SpecialChar LyX
+ which is supposed to produce correct \SpecialChar LaTeX
+ anyways?
+ The answer is simple:
+ Just as
\family typewriter
Lint
\family default
\emph on
syntax
\emph default
- of C programs, but also does
+ of C programs,
+ but also does
\emph on
semantic
\emph default
- checks for type-errors,
+ checks for type-errors,
+
\family sans
Chk\SpecialChar TeX
\emph on
typographic
\emph default
- errors, in addition to the syntactical ones.
- Specifically,
+ errors,
+ in addition to the syntactical ones.
+ Specifically,
+
\family sans
Chk\SpecialChar TeX
\family default
- is capable of detecting several common errors, such as
+ is capable of detecting several common errors,
+ such as
\end_layout
\begin_layout Itemize
\end_layout
\begin_layout Itemize
-Enforcement of end-of-sentence space when the last sentence ends with a
- capital letter:
+Enforcement of end-of-sentence space when the last sentence ends with a capital letter:
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-The label should stick right up to the text to avoid falling to a wrong
- page.
+The label should stick right up to the text to avoid falling to a wrong page.
\begin_inset CommandInset label
LatexCommand label
\end_layout
\begin_layout Itemize
-Space in front of references, instead of hard spaces:
+Space in front of references,
+ instead of hard spaces:
\begin_inset Newline newline
\end_inset
-If you have bad luck, the text will break right between the referenced text
- and reference number, and that's a pity.
+If you have bad luck,
+ the text will break right between the referenced text and reference number,
+ and that's a pity.
See section
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:chktex"
+nolink "false"
\end_inset
\begin_inset Quotes erd
\end_inset
- your document before printing, and you should run it right after the obligatory
- spelling check, and before you go fine tuning the typesetting.
+ your document before printing,
+ and you should run it right after the obligatory spelling check,
+ and before you go fine tuning the typesetting.
\end_layout
\begin_layout Subsection
\end_layout
\begin_layout Standard
-If you have the program installed, usage is as simple as choosing
+If you have the program installed,
+ usage is as simple as choosing
\family sans
Tools\SpecialChar menuseparator
Check
.
This will make \SpecialChar LyX
generate a \SpecialChar LaTeX
- file of your document, start
+ file of your document,
+ start
\family sans
Chk\SpecialChar TeX
\family default
- to check it, and then make \SpecialChar LyX
+ to check it,
+ and then make \SpecialChar LyX
insert
\begin_inset Quotes eld
\end_inset
Chk\SpecialChar TeX
\family default
-, if there were any.
- The warnings will be placed close to the point of the mistake, and you
- can quickly find them by using the
+,
+ if there were any.
+ The warnings will be placed close to the point of the mistake,
+ and you can quickly find them by using the
\family sans
Navigate\SpecialChar menuseparator
Error
\family default
- menu item, or the shortcut key
+ menu item,
+ or the shortcut key
\family sans
C-g
\family default
cua
\family default
bind file.
- Open the error boxes by clicking on them with the mouse, or use the shortcut
- key
+ Open the error boxes by clicking on them with the mouse,
+ or use the shortcut key
\family sans
C-i
\family default
\family typewriter
cua
\family default
- bindings, or the corresponding
+ bindings,
+ or the corresponding
\family sans
C-o
\family default
emacs
\family default
bind file.
- Read the warning and correct the mistake, if it is a mistake.
- If you have trouble understanding what the warning is about, you can safely
- ignore it.
- Remember that there is a hidden layer between the document on screen and
- the technical details in invoking
+ Read the warning and correct the mistake,
+ if it is a mistake.
+ If you have trouble understanding what the warning is about,
+ you can safely ignore it.
+ Remember that there is a hidden layer between the document on screen and the technical details in invoking
\family sans
Chk\SpecialChar TeX
\family default
-, and this gap can make some warnings seem arcane or just plain silly.
+,
+ and this gap can make some warnings seem arcane or just plain silly.
\end_layout
\begin_layout Standard
-This document is an excellent testing bed for the feature, and it should
- provide quite a few warnings for you to fiddle with.
- Since computers are only so smart, expect most of the warnings to be false
- alarms, though.
+This document is an excellent testing bed for the feature,
+ and it should provide quite a few warnings for you to fiddle with.
+ Since computers are only so smart,
+ expect most of the warnings to be false alarms,
+ though.
\end_layout
\begin_layout Subsection
\end_layout
\begin_layout Standard
-Sometimes, you'll find that
+Sometimes,
+ you'll find that
\family sans
Chk\SpecialChar TeX
\family default
makes more noise than suits your mood.
- Then you can choose not to use it, wait until your mood changes, or try
- to customize
+ Then you can choose not to use it,
+ wait until your mood changes,
+ or try to customize
\family sans
Chk\SpecialChar TeX
\emph on
is
\emph default
- very configurable and extensible, you should not expect to solve all problems
- with
+ very configurable and extensible,
+ you should not expect to solve all problems with
\family sans
Chk\SpecialChar TeX
this way.
Since \SpecialChar LyX
has to generate a somewhat special \SpecialChar LaTeX
- file to be able to match the
- line numbers from the
+ file to be able to match the line numbers from the
\family sans
Chk\SpecialChar TeX
\end_inset
- to the internal document structure, some of the warnings will not appear
- correctly.
+ to the internal document structure,
+ some of the warnings will not appear correctly.
There are two things you can do about this:
\end_layout
\end_inset
-, or the global
+,
+ or the global
\family sans
Chk\SpecialChar TeX
chktexrc
\family default
).
- See below to learn what warnings can be enabled and disabled on the command
- line.
+ See below to learn what warnings can be enabled and disabled on the command line.
\end_layout
\begin_layout Itemize
chktex
\family default
manually on that.
- Invoked in this way, it can be a hassle to find the corresponding place
- in the document inside \SpecialChar LyX
-, but with a little patience, you should be able
- to do it.
+ Invoked in this way,
+ it can be a hassle to find the corresponding place in the document inside \SpecialChar LyX
+,
+ but with a little patience,
+ you should be able to do it.
\end_layout
\begin_layout Standard
\family typewriter
-n#
\family default
- to disable a warning, and
+ to disable a warning,
+ and
\family typewriter
-w#
\family default
to enable a warning.
- The emphasized entries are disabled by default, because the default is
- "
+ The emphasized entries are disabled by default,
+ because the default is "
\family typewriter
chktex -n1 -n3 -n6 -n9 -n22 -n25 -n30 -n38
\family default
\begin_layout Standard
Notice that you should only use the options that enable and disable warnings,
because \SpecialChar LyX
- relies on some of the other command line parameters to be set
- in a specific way to have a chance to communicate with
+ relies on some of the other command line parameters to be set in a specific way to have a chance to communicate with
\family typewriter
chktex
\family default
\begin_inset Quotes erd
\end_inset
- expected, found
+ expected,
+ found
\begin_inset Quotes eld
\end_inset
\family default
- to begin quotation, not
+ to begin quotation,
+ not
\family typewriter
'
\family default
\family typewriter
'
\family default
- to end quotation, not
+ to end quotation,
+ not
\family typewriter
\begin_inset Quotes eld
\begin_layout Standard
In later versions of \SpecialChar LyX
-, we hope to provide a more complete interface to this
- tool (and it's smaller cousin
+,
+ we hope to provide a more complete interface to this tool (and it's smaller cousin
\family typewriter
lacheck
\family default
) to exploit the full power of it.
- But it's not exactly useless as it is now: go try it on one of your existing
- documents of a certain length and be surprised.
+ But it's not exactly useless as it is now:
+ go try it on one of your existing documents of a certain length and be surprised.
\end_layout
\begin_layout Section
\begin_layout Standard
\SpecialChar LyX
supports some of the most basic RCS/CVS/SVN/GIT commands.
- If you need something a bit more sophisticated you will have to do that
- manually in a terminal.
+ If you need something a bit more sophisticated you will have to do that manually in a terminal.
\end_layout
\begin_layout Standard
-Also note that CVS support is not as good as subversion support, so we advise
- using SVN instead.
+Also note that CVS support is not as good as subversion support,
+ so we advise using SVN instead.
A good place to start learning Subversion is the SVN Book
\begin_inset Foot
status collapsed
\begin_inset Quotes erd
\end_inset
- (a man file, read it with
+ (a man file,
+ read it with
\family typewriter
man rcsintro
\family default
).
This file describes all the basic features of RCS.
- You should especially notice the comment about a RCS directory, and the
- notion of a master RCS file (the file ending in
+ You should especially notice the comment about a RCS directory,
+ and the notion of a master RCS file (the file ending in
\family typewriter
,v
\family default
\begin_layout Standard
Before you begin to use the version control features in \SpecialChar LyX
-, you should be
- familiar with RCS/CVS/SVN/GIT usage.
+,
+ you should be familiar with RCS/CVS/SVN/GIT usage.
The implementation in \SpecialChar LyX
- assumes a recent version of the GNU RCS or CVS/SVN
- package — no guarantees are made for older versions.
+ assumes a recent version of the GNU RCS or CVS/SVN package —
+ no guarantees are made for older versions.
Most of the log messages are not currently displayed after operations —
you can check them in the Messages pane if you are unsure.
- Regular users of version control will appreciate the VC toolbar, which
- can be enabled via
+ Regular users of version control will appreciate the VC toolbar,
+ which can be enabled via
\family sans
View\SpecialChar menuseparator
Toolbars\SpecialChar menuseparator
\end_layout
\begin_layout Standard
-It is strongly recommended to store documents in uncompressed format if
- using version control (uncheck
+It is strongly recommended to store documents in uncompressed format if using version control (uncheck
\family sans
Document\SpecialChar menuseparator
Compressed
\family default
- if it is checked): Uncompressed LyX documents are text files and therefore
- for merging two different versions by version control systems.
- Compressed LyX documents are binary files, which cannot be merged by version
- control systems.
+ if it is checked):
+ Uncompressed LyX documents are text files and therefore for merging two different versions by version control systems.
+ Compressed LyX documents are binary files,
+ which cannot be merged by version control systems.
\end_layout
\begin_layout Subsection
\end_layout
\begin_layout Standard
-If your document is not under revision control, this is the only item shown
- in the menu.
- And if it is under revision control, the
+If your document is not under revision control,
+ this is the only item shown in the menu.
+ And if it is under revision control,
+ the
\family sans
Register
\family default
\end_layout
\begin_layout Standard
-This command registers your document with RCS (unless you are under the
- directory managed by CVS)\SpecialChar endofsentence
- You are asked interactively to supply an initial
- description of the document.
+This command registers your document with RCS (unless you are under the directory managed by CVS)\SpecialChar endofsentence
+ You are asked interactively to supply an initial description of the document.
The document is now set in Read-Only mode and you have to
\family sans
Check
Edit
\family default
-, before making any changes to it.
+,
+ before making any changes to it.
A document under revision control has a
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Standard
-When you are finished editing a file, you check in your changes.
- When you do this, you are asked for a description of the changes.
+When you are finished editing a file,
+ you check in your changes.
+ When you do this,
+ you are asked for a description of the changes.
This is stored in the history log.
- The version number is bumped, your changes are applied to the master RCS
- file, the document is unlocked and set to Read-Only mode.
+ The version number is bumped,
+ your changes are applied to the master RCS file,
+ the document is unlocked and set to Read-Only mode.
\end_layout
\begin_layout Itemize
-RCS command:
+RCS command:
+
\family typewriter
ci -q -u -m"<description>" <file-name>
\end_layout
\begin_layout Standard
By doing this you lock the document so that only you can edit it.
This will also make the document Read-Write only for you.
- You will usually continue editing for a while and when you are finished
- you check in your changes.
+ You will usually continue editing for a while and when you are finished you check in your changes.
The status line is changed to reflect that you have locked the file.
\end_layout
\begin_layout Itemize
-RCS command:
+RCS command:
+
\family typewriter
co -q -l <file-name>
\end_layout
\end_layout
\begin_layout Standard
-This will discard all changes made to the document since the last check
- in.
+This will discard all changes made to the document since the last check in.
You get a warning before changes are discarded.
\end_layout
\begin_layout Itemize
-RCS command:
+RCS command:
+
\family typewriter
co -f -u<version> <file-name>
\end_layout
\begin_layout Standard
This will create a copy of the current document.
- Since RCS does not support copy operations natively, the version history
- is not preserved, and the copy is added as a new file.
+ Since RCS does not support copy operations natively,
+ the version history is not preserved,
+ and the copy is added as a new file.
It requires a clean document without any changes since the last checkin.
You are asked for a file name and a description of the copy operation.
- After that the copy is created, both locally and in the repository.
- If the parent directories of the copied and original document differ, all
- relative paths of included files of the copy are adjusted (like in
+ After that the copy is created,
+ both locally and in the repository.
+ If the parent directories of the copied and original document differ,
+ all relative paths of included files of the copy are adjusted (like in
\family sans
File\SpecialChar menuseparator
Save As
\family default
\SpecialChar ldots
).
- Finally, the copy is loaded instead of the original document.
+ Finally,
+ the copy is loaded instead of the original document.
\end_layout
\begin_layout Labeling
\begin_inset space ~
\end_inset
-commands:
+commands:
+
\begin_inset space ~
\end_inset
\begin_layout Standard
This makes as if the last check in never happened.
No changes are made to the document loaded into \SpecialChar LyX
-, but the last version
- is removed from the master RCS file.
+,
+ but the last version is removed from the master RCS file.
\end_layout
\begin_layout Itemize
-RCS command:
+RCS command:
+
\family typewriter
rcs -o<version> <file-name>
\end_layout
\begin_layout Standard
\SpecialChar LyX
- supports RCS version number, author name, date and time of last commit.
+ supports RCS version number,
+ author name,
+ date and time of last commit.
All those are extracted from
\family typewriter
rlog -r <file-name>
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:VCS-Revision-Information"
+nolink "false"
\end_inset
Control
\family default
submenu.
- The version control system SVN is more powerful, so please use it instead
- of CVS if possible.
+ The version control system SVN is more powerful,
+ so please use it instead of CVS if possible.
\end_layout
\begin_layout Subsubsection
\end_layout
\begin_layout Standard
-If you start from scratch with CVS you have to create your repository and
- checkout the working copy with external tools.
- If you're using a client-server setup you may need to login before doing
- the first repository checkout.
+If you start from scratch with CVS you have to create your repository and checkout the working copy with external tools.
+ If you're using a client-server setup you may need to login before doing the first repository checkout.
\end_layout
\begin_layout Standard
-If your documents are under revision control and others are using the same
- repository problems arise when different changes to the same document at
- the same location happen.
+If your documents are under revision control and others are using the same repository problems arise when different changes to the same document at the same location happen.
Standard CVS repositories don't operate with a file locking mechanism.
- This may be surprising, but conflicts only occur if people disagree on
- the proper content of the same part of a document.
- So, if co-workers are used to communicate regularly, these conflicts occur
- rarely.
+ This may be surprising,
+ but conflicts only occur if people disagree on the proper content of the same part of a document.
+ So,
+ if co-workers are used to communicate regularly,
+ these conflicts occur rarely.
If they don't communicate they have a fundamental problem anyway.
Nevertheless some people like to work with so called
\begin_inset Quotes eld
\end_inset
.
- If they do so the working copy of all files is readonly when checked out
- first and the user starts editing after using a special command to make
- the working copy writable.
+ If they do so the working copy of all files is readonly when checked out first and the user starts editing after using a special command to make the working copy writable.
When the changes are checked in the working copy returns to readonly state.
With \SpecialChar LyX
one has to edit the
\end_inset
to work with reserved checkouts.
- The benefit is the possibility to see who is using a writable copy of some
- document.
+ The benefit is the possibility to see who is using a writable copy of some document.
It's not guaranteed only one user makes a copy writable.
\end_layout
\begin_layout Standard
\SpecialChar LyX
tries to guess if you're using reserved or non-reserved checkouts.
- If your working copy is readonly or it is writable and an additional copy
- of your document exists in the CVS/Base sub-directory a reserved otherwise
- a non-reserved checkout is assumed.
+ If your working copy is readonly or it is writable and an additional copy of your document exists in the CVS/Base sub-directory a reserved otherwise a non-reserved checkout is assumed.
When a reserved checkout is detected you have to use
\begin_inset Flex Noun
status collapsed
\end_inset
- operation is possible and that makes your working copy readonly again after
- transferring your changes to the repository.
+ operation is possible and that makes your working copy readonly again after transferring your changes to the repository.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-If your document is not under revision control, this is the only item shown
- in the menu.
- And if it is under revision control, the
+If your document is not under revision control,
+ this is the only item shown in the menu.
+ And if it is under revision control,
+ the
\family sans
Register
\family default
\end_inset
- in the case you have already the documents directory under CVS control
- (in particular
+ in the case you have already the documents directory under CVS control (in particular
\family typewriter
CVS/Entries
\family default
file exists).
- This means you have to create or checkout the archive by yourself using
- external tools.
+ This means you have to create or checkout the archive by yourself using external tools.
(In case you forget that step \SpecialChar LyX
registers the document with RCS.)
\end_layout
\begin_layout Standard
-Then you are asked interactively to supply an initial description of the
- document.
+Then you are asked interactively to supply an initial description of the document.
Don't forget that registered file is not yet checked in.
\end_layout
\begin_layout Standard
-CVS command that is run:
+CVS command that is run:
+
\family typewriter
cvs -q add -m"<entered message>" "<file-name>"
\end_layout
\begin_inset Quotes eld
\end_inset
-change the current working directory to file location and use the file name
- without path component as argument
+change the current working directory to file location and use the file name without path component as argument
\begin_inset Quotes erd
\end_inset
\end_layout
\begin_layout Standard
-When you are finished editing a file, you commit your changes.
- When you do this and you had changed the document, you are asked for a
- description of the changes.
+When you are finished editing a file,
+ you commit your changes.
+ When you do this and you had changed the document,
+ you are asked for a description of the changes.
After that changes are written to the repository.
- In case you didn't change the document and a reserved checkout is detected
- the reservation made on
+ In case you didn't change the document and a reserved checkout is detected the reservation made on
\begin_inset Flex Noun
status collapsed
\begin_inset space ~
\end_inset
-command:
+command:
+
\begin_inset space ~
\end_inset
\end_layout
\begin_layout Standard
-When you are sharing a repository with others, you may have to incorporate
- their changes into your working copy.
+When you are sharing a repository with others,
+ you may have to incorporate their changes into your working copy.
\end_layout
\begin_layout Standard
-CVS command:
+CVS command:
+
\family typewriter
cvs -q update "<file-name>"
\end_layout
\begin_layout Standard
-If a readonly checkout is detected the working copy is made writable and
- reserved.
+If a readonly checkout is detected the working copy is made writable and reserved.
\end_layout
\begin_layout Standard
-CVS command:
+CVS command:
+
\family typewriter
cvs -q edit "<file-name>"
\end_layout
\end_layout
\begin_layout Standard
-This will discard all changes made to the document since the last check
- in.
+This will discard all changes made to the document since the last check in.
You get a warning before changes are discarded.
- Firstly the file is deleted, secondly CVS update command is run.
+ Firstly the file is deleted,
+ secondly CVS update command is run.
\end_layout
\begin_layout Standard
-CVS command:
+CVS command:
+
\family typewriter
cvs -q update "<file-name>"
\end_layout
\begin_layout Standard
-If a reserved checkout is detected and the working copy has no changes only
- the reservation is undone.
+If a reserved checkout is detected and the working copy has no changes only the reservation is undone.
\end_layout
\begin_layout Standard
-CVS command:
+CVS command:
+
\family typewriter
cvs -q unedit "<file-name>"
\end_layout
\begin_layout Standard
This will create a copy of the current document.
- Since CVS does not support copy operations natively, the version history
- is not preserved, and the copy is added as a new file.
+ Since CVS does not support copy operations natively,
+ the version history is not preserved,
+ and the copy is added as a new file.
It requires a clean document without any changes since the last checkin.
You are asked for a file name and a description of the copy operation.
- After that the copy is created, both locally and in the repository.
- If the parent directories of the copied and original document differ, all
- relative paths of included files of the copy are adjusted (like in
+ After that the copy is created,
+ both locally and in the repository.
+ If the parent directories of the copied and original document differ,
+ all relative paths of included files of the copy are adjusted (like in
\family sans
File\SpecialChar menuseparator
Save As
\family default
\SpecialChar ldots
).
- Finally, the copy is loaded instead of the original document.
+ Finally,
+ the copy is loaded instead of the original document.
\end_layout
\begin_layout Labeling
\begin_inset space ~
\end_inset
-commands:
+commands:
+
\begin_inset space ~
\end_inset
\begin_layout Standard
This will rename the current document.
- Since CVS does not support rename operations natively, the version history
- is not preserved, the renamed document is added as a new file, and the
- original document is deleted.
+ Since CVS does not support rename operations natively,
+ the version history is not preserved,
+ the renamed document is added as a new file,
+ and the original document is deleted.
It requires a clean document without any changes since the last checkin.
You are asked for a file name and a description of the rename operation.
- After that the document is renamed, both locally and in the repository.
- If the parent directories of the new and old file names differ, all relative
- paths of included files are adjusted (like in
+ After that the document is renamed,
+ both locally and in the repository.
+ If the parent directories of the new and old file names differ,
+ all relative paths of included files are adjusted (like in
\family sans
File\SpecialChar menuseparator
Save As
\family default
\SpecialChar ldots
).
- Finally, the document is reloaded using the new name.
+ Finally,
+ the document is reloaded using the new name.
\end_layout
\begin_layout Labeling
\begin_inset space ~
\end_inset
-commands:
+commands:
+
\begin_inset space ~
\end_inset
\end_layout
\begin_layout Standard
-Once your documents gets more complex, containing sub-documents and pictures,
+Once your documents gets more complex,
+ containing sub-documents and pictures,
including external
\begin_inset Flex Code
status collapsed
files and so on using version control becomes more complicated.
\SpecialChar LyX
supports updating the whole tree in which resides the document.
- This become especially useful once you cooperate with people which neither
- have detailed knowledge about CVS usage nor they have ambition to commit
- additional material to the repository.
- You have to organize the files structure so that all external files are
- in the same directory or subdirectories of the document.
+ This become especially useful once you cooperate with people which neither have detailed knowledge about CVS usage nor they have ambition to commit additional material to the repository.
+ You have to organize the files structure so that all external files are in the same directory or subdirectories of the document.
It's good practice anyway to store multipart documents in an extra directory.
\end_layout
command updates the whole directory.
If local changes are detected user is warned before update starts.
- In case of merge conflicts both versions of the conflicting document parts
- are placed in the final document.
+ In case of merge conflicts both versions of the conflicting document parts are placed in the final document.
You have to review and correct the result of the merge.
You'll find the conflicts enclosed in pairs of
\begin_inset Flex Code
\end_inset
.
- The first part is your version as before the update operation with the
- document name prepended.
- The second one is the repository version with the version number after
- the sequence of
+ The first part is your version as before the update operation with the document name prepended.
+ The second one is the repository version with the version number after the sequence of
\begin_inset Flex Code
status collapsed
\begin_inset space ~
\end_inset
-commands:
+commands:
+
\begin_inset space ~
\end_inset
status collapsed
\begin_layout Plain Layout
-cd $path; cvs diff
+cd $path;
+ cvs diff
\family typewriter
"."
\end_layout
status collapsed
\begin_layout Plain Layout
-cd $path; cvs -q update
+cd $path;
+ cvs -q update
\family typewriter
"."
\end_layout
\begin_layout Standard
\SpecialChar LyX
- supports CVS version number, author name, date and time of last commit.
+ supports CVS version number,
+ author name,
+ date and time of last commit.
All those are extracted from
\family typewriter
cvs log -r <file-name>
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:VCS-Revision-Information"
+nolink "false"
\end_inset
Control
\family default
submenu.
- Please note that if you use password protected access to repository via
- ssh, you will be asked in terminal window.
+ Please note that if you use password protected access to repository via ssh,
+ you will be asked in terminal window.
\SpecialChar LyX
- was tested against SVN 1.5, 1.6, 1.7 and 1.8
+ was tested against SVN 1.5,
+ 1.6,
+ 1.7 and 1.8
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-Most of the commands will work with 1.4 too, see
+Most of the commands will work with 1.4 too,
+ see
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:SVN-Repo-Update"
+nolink "false"
\end_inset
.
- There seems to be currently unresolved permissions problem under SVN 1.8
- with reverting changes when file is locked.
+ There seems to be currently unresolved permissions problem under SVN 1.8 with reverting changes when file is locked.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-If your document is not under revision control, this is the only item shown
- in the menu.
- And if it is under revision control, the
+If your document is not under revision control,
+ this is the only item shown in the menu.
+ And if it is under revision control,
+ the
\family sans
Register
\family default
\end_layout
\begin_layout Standard
-This command registers in SVN your document ONLY in case you have already
- the documents directory under SVN control (in particular
+This command registers in SVN your document ONLY in case you have already the documents directory under SVN control (in particular
\family typewriter
.svn/entries
\family default
\end_layout
\begin_layout Standard
-Then you are asked interactively to supply an initial description of the
- document.
+Then you are asked interactively to supply an initial description of the document.
Don't forget that registered file is not yet commited.
\end_layout
\begin_layout Standard
-SVN command that is run:
+SVN command that is run:
+
\family typewriter
svn add -q
\begin_inset Quotes qld
\end_layout
\begin_layout Standard
-When you are finished editing a file, you commit your changes.
- When you do this, you are asked for a description of the changes.
+When you are finished editing a file,
+ you commit your changes.
+ When you do this,
+ you are asked for a description of the changes.
After that changes are commited.
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:SVN-File-Locking"
+nolink "false"
\end_inset
\begin_layout Standard
Updates the changes of this file from the repository.
- Be sure you understand SVN merging and conflicts resolving before using
- this function, because all conflicts has to be resolved manually by you!
+ Be sure you understand SVN merging and conflicts resolving before using this function,
+ because all conflicts has to be resolved manually by you!
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-This will discard all changes made to the document since the last check
- in.
+This will discard all changes made to the document since the last check in.
You get a warning before changes are discarded.
\end_layout
\begin_layout Standard
-SVN command:
+SVN command:
+
\family typewriter
svn revert -q
\begin_inset Quotes qld
This will create a copy of the current document including the version history.
It requires a clean document without any changes since the last checkin.
You are asked for a file name and a description of the copy operation.
- After that the copy is created, both locally and in the repository.
- If the parent directories of the copied and original document differ, all
- relative paths of included files of the copy are adjusted (like in
+ After that the copy is created,
+ both locally and in the repository.
+ If the parent directories of the copied and original document differ,
+ all relative paths of included files of the copy are adjusted (like in
\family sans
File\SpecialChar menuseparator
Save As
\family default
\SpecialChar ldots
).
- Finally, the copy is loaded instead of the original document.
+ Finally,
+ the copy is loaded instead of the original document.
\end_layout
\begin_layout Labeling
\begin_inset space ~
\end_inset
-commands:
+commands:
+
\begin_inset space ~
\end_inset
This will rename the current document including the version history.
It requires a clean document without any changes since the last checkin.
You are asked for a file name and a description of the rename operation.
- After that the document is renamed, both locally and in the repository.
- If the parent directories of the new and old file names differ, all relative
- paths of included files are adjusted (like in
+ After that the document is renamed,
+ both locally and in the repository.
+ If the parent directories of the new and old file names differ,
+ all relative paths of included files are adjusted (like in
\family sans
File\SpecialChar menuseparator
Save As
\family default
\SpecialChar ldots
).
- Finally, the document is reloaded using the new name.
+ Finally,
+ the document is reloaded using the new name.
\end_layout
\begin_layout Labeling
\begin_inset space ~
\end_inset
-commands:
+commands:
+
\begin_inset space ~
\end_inset
\end_layout
\begin_layout Standard
-All the commands above have one shortcoming – they deal with the current
- document only.
- Once your document contains pictures, includes external
+All the commands above have one shortcoming – they deal with the current document only.
+ Once your document contains pictures,
+ includes external
\begin_inset Flex Code
status collapsed
status collapsed
\begin_layout Plain Layout
-One need to organize the files structure so that all external files are
- in the same directory or subdirectories of the document.
+One need to organize the files structure so that all external files are in the same directory or subdirectories of the document.
\end_layout
\end_inset
.
- This become especially useful once you cooperate with people which neither
- know about subversion management nor they have ambition to commit additional
- material to the repository.
+ This become especially useful once you cooperate with people which neither know about subversion management nor they have ambition to commit additional material to the repository.
\end_layout
\end_inset
- command updates the whole directory and in case of merge conflicts local
- version of the files are left, so no unintended data loss occurs.
+ command updates the whole directory and in case of merge conflicts local version of the files are left,
+ so no unintended data loss occurs.
If local changes are detected user is warned before update starts.
\end_layout
\begin_inset space ~
\end_inset
-commands:
+commands:
+
\begin_inset space ~
\end_inset
\end_layout
\begin_layout Standard
-The file exchange through various revision control systems brings the problem
- of merge conflicts in case two different users try to edit the same (parts
- of) document.
- When such a conflict happens it needs manual resolving and one reasonable
- alternative is to provide some kind of locking mechanism, which guarantees
- that only one user is allowed to edit file at the given time.
+The file exchange through various revision control systems brings the problem of merge conflicts in case two different users try to edit the same (parts of) document.
+ When such a conflict happens it needs manual resolving and one reasonable alternative is to provide some kind of locking mechanism,
+ which guarantees that only one user is allowed to edit file at the given time.
\end_layout
\begin_layout Standard
-SVN has two such mechanisms to provide mutual exclusivity for file access
- – locks and automatic setting of write permissions (see sec.
+SVN has two such mechanisms to provide mutual exclusivity for file access – locks and automatic setting of write permissions (see sec.
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Automatical-Locking-Property"
+nolink "false"
\end_inset
.
If this property is detected for a given document \SpecialChar LyX
- starts to use SVN locks
- for document editing automatically and the whole check-in/out mechanism
- switches to the same regimen as for RCS.
+ starts to use SVN locks for document editing automatically and the whole check-in/out mechanism switches to the same regimen as for RCS.
This in particular means there are two different modes of file use in \SpecialChar LyX
:
\end_layout
Check-out
\emph default
consists of updating from the repository and gaining write lock.
- If the lock is not possible to obtain, we remain in unlocked state.
+ If the lock is not possible to obtain,
+ we remain in unlocked state.
\end_layout
\begin_layout Itemize
Check-in
\emph default
consists of commiting changes and releasing write-lock.
- If no changes have been made to the document, no commit will be produced
+ If no changes have been made to the document,
+ no commit will be produced
\begin_inset Foot
status collapsed
\begin_layout Labeling
\labelwidthstring 00.00.0000
Check-in:
+
\family typewriter
svn commit -q -m"<description>" "<file-name>"
\begin_inset Newline newline
\begin_layout Labeling
\labelwidthstring 00.00.0000
-Check-out:
+Check-out:
+
\family typewriter
svn update "<file-name>"
\begin_inset Newline newline
\end_layout
\begin_layout Standard
-The above mentioned automatic setting of write permissions of the .lyx file
- can be set through
+The above mentioned automatic setting of write permissions of the .lyx file can be set through
\family sans
File\SpecialChar menuseparator
Version
Use Locking Property
\family default
.
- This command is active only when the file is not locked on the svn server
- (i.e.
+ This command is active only when the file is not locked on the svn server (i.e.
you need to check-out before proceeding).
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
Set:
+
\family typewriter
svn propset svn:needs-lock ON "<file-name>"
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-Unset:
+Unset:
+
\family typewriter
svn propdel svn:needs-lock "<file-name>"
\end_layout
\end_layout
\begin_layout Standard
-There are more possibilities how to activate revision information in our
- document.
+There are more possibilities how to activate revision information in our document.
\end_layout
\begin_layout Itemize
\end_inset
- command, the following table gives you an idea, how to read the results.
+ command,
+ the following table gives you an idea,
+ how to read the results.
\end_layout
\begin_layout Standard
\begin_inset Text
\begin_layout Plain Layout
-partial working copy, from a sparse checkout
+partial working copy,
+ from a sparse checkout
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-mixed revision, modified, switched working copy
+mixed revision,
+ modified,
+ switched working copy
\end_layout
\end_inset
\change_unchanged
).
- The information will be available only when you have the file stored under
- svn managment (i.e.
+ The information will be available only when you have the file stored under svn managment (i.e.
the
\begin_inset Flex Code
status collapsed
\end_deeper
\begin_layout Itemize
-Another—a hacking one—possibility is to use svn keywords
+Another—
+a hacking one—
+possibility is to use svn keywords
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
This is an easy way how to ensure that \SpecialChar LyX
- won't break the line in the middle
- of keyword tag.
+ won't break the line in the middle of keyword tag.
\end_layout
\end_inset
status collapsed
\begin_layout Plain Layout
-$Rev: 59 $
+$Rev:
+ 59 $
\end_layout
\end_inset
) after each update and commit.
There are more problems with this approach.
- Firstly, the '$' character is used in \SpecialChar TeX
- world for math equations, so any
- occurence of math formula
+ Firstly,
+ the '$' character is used in \SpecialChar TeX
+ world for math equations,
+ so any occurence of math formula
\begin_inset Formula $Rev$
\end_inset
in your \SpecialChar LyX
document.
- Similarly for other keywords like Id, Date, Author, etc.
- Secondly svn output is dependent on your locales, so its very easy that
- svn would produce some problematic strings once Date is used.
- Thirdly you get the whole 'Rev: 59' string in your document instead of
- the plain number.
- Until subversion implements user's custom keywords it will be hard to use
- this approach reliably or let \SpecialChar LyX
+ Similarly for other keywords like Id,
+ Date,
+ Author,
+ etc.
+ Secondly svn output is dependent on your locales,
+ so its very easy that svn would produce some problematic strings once Date is used.
+ Thirdly you get the whole 'Rev:
+ 59' string in your document instead of the plain number.
+ Until subversion implements user's custom keywords it will be hard to use this approach reliably or let \SpecialChar LyX
to support it directly.
\end_layout
\end_layout
\begin_layout Quote
-My inclination is to say that if the user cannot figure out the command
- line operations on their own fairly quickly, they would be well advised
- to use TortoiseSVN.
- —P.
+My inclination is to say that if the user cannot figure out the command line operations on their own fairly quickly,
+ they would be well advised to use TortoiseSVN.
+ —
+P.
A.
Rubin
\end_layout
\begin_layout Standard
In addition to installing \SpecialChar LyX
-, and having access to a Subversion repository,
+,
+ and having access to a Subversion repository,
the user will need to install the Subversion client program.
A Windows installer for the client program is available from
\begin_inset CommandInset href
\end_inset
-, which integrates Subversion operations into the context (rightclick) menu
- of Windows Explorer.
+,
+ which integrates Subversion operations into the context (rightclick) menu of Windows Explorer.
Operations done outside \SpecialChar LyX
- will typically be more convenient using the Explorer
- context menu.
- Note that TortoiseSVN is not a replacement for the client program, which
- is what \SpecialChar LyX
+ will typically be more convenient using the Explorer context menu.
+ Note that TortoiseSVN is not a replacement for the client program,
+ which is what \SpecialChar LyX
itself will use.
\end_layout
\begin_layout Standard
Before a \SpecialChar LyX
- document can be brought under version control in Subversion, its
- parent directory needs to be under version control.
+ document can be brought under version control in Subversion,
+ its parent directory needs to be under version control.
If the document is being added to a project already in the repository,
- this is accomplished by checking the project out to the directory where
- the new document will be placed.
- If the project itself is not yet under version control (for instance, if
- this document starts a new project), the directory must be imported into
- the repository.
+ this is accomplished by checking the project out to the directory where the new document will be placed.
+ If the project itself is not yet under version control (for instance,
+ if this document starts a new project),
+ the directory must be imported into the repository.
This is done outside \SpecialChar LyX
.
- Both import and checkout are easily accomplished from the Explorer context
- menu using TortoiseSVN, or alternatively can be done using the command
- line client at a DOS prompt.
- The procedure for importing the project using TortoiseSVN is described
- below, assuming an existing repository and a new project being started
- in
+ Both import and checkout are easily accomplished from the Explorer context menu using TortoiseSVN,
+ or alternatively can be done using the command line client at a DOS prompt.
+ The procedure for importing the project using TortoiseSVN is described below,
+ assuming an existing repository and a new project being started in
\family typewriter
C:
\backslash
new project
\family default
.
- For information on using the Subversion client program, run
+ For information on using the Subversion client program,
+ run
\family typewriter
svn --help
\family default
\backslash
new project
\family default
-in Windows Explorer, right click it, and select
+in Windows Explorer,
+ right click it,
+ and select
\family sans
TortoiseSVN\SpecialChar menuseparator
Repo-browser
\family default
.
- If necessary, adjust the URL for the repository, then click OK.
+ If necessary,
+ adjust the URL for the repository,
+ then click OK.
\end_layout
\begin_layout Enumerate
-Right click the level of the repository under which you want to place the
- new project folder (typically the top level) and click
+Right click the level of the repository under which you want to place the new project folder (typically the top level) and click
\family sans
Create folder
\family default
Supply a name for the project folder and click OK.
- Add a message for the log file if desired, then click OK again.
+ Add a message for the log file if desired,
+ then click OK again.
The new project folder should appear in the repository.
- Finally, click OK again to exit the repository browser.
+ Finally,
+ click OK again to exit the repository browser.
\end_layout
\begin_layout Enumerate
\backslash
new project
\family default
-, this time selecting SVN Checkout\SpecialChar ldots
- Select the URL of the project folder
- you just created in the repository, and set the checkout directory to
+,
+ this time selecting SVN Checkout\SpecialChar ldots
+ Select the URL of the project folder you just created in the repository,
+ and set the checkout directory to
\family typewriter
C:
\backslash
\family default
Click OK.
- You will be warned about a non-empty folder; click OK to proceed.
+ You will be warned about a non-empty folder;
+ click OK to proceed.
You should now have a
\family typewriter
.svn
\end_layout
\begin_layout Standard
-From this point onward, you should have full functionality in the
+From this point onward,
+ you should have full functionality in the
\family sans
File\SpecialChar menuseparator
Version
Control
\family default
menu.
- You also have the option of checking the document in and out, viewing its
- history, etc.
- using the TortoiseSVN context menu in Windows Explorer or the Subversion
- client program from a command prompt.
+ You also have the option of checking the document in and out,
+ viewing its history,
+ etc.
+ using the TortoiseSVN context menu in Windows Explorer or the Subversion client program from a command prompt.
\end_layout
\begin_layout Subsubsection
\end_layout
\begin_layout Standard
-Compared with Linux setting up an svn client to communicate over ssh under
- Windows is a rather troublesome task.
- We will at least offer some hints how to setup the client side but prior
- knowledge about ssh and the Windows command line is needed, also be prepared
- for a great deal of frustration\SpecialChar ldots
+Compared with Linux setting up an svn client to communicate over ssh under Windows is a rather troublesome task.
+ We will at least offer some hints how to setup the client side but prior knowledge about ssh and the Windows command line is needed,
+ also be prepared for a great deal of frustration\SpecialChar ldots
\end_layout
\begin_layout Enumerate
-Get an svn client for windows, as described in the previous sections.
+Get an svn client for windows,
+ as described in the previous sections.
When it is a fresh install run some svn command (e.g.
\begin_inset Flex Code
\end_inset
-) to create config files, which you will need to change later on.
+) to create config files,
+ which you will need to change later on.
\end_layout
\begin_layout Enumerate
Choose an ssh client for Windows.
- There are several possibilities, we will use the one from Putty tools
+ There are several possibilities,
+ we will use the one from Putty tools
\begin_inset Foot
status collapsed
\end_inset
.
- You will need to set the connection up so that the client doesn't ask for
- any password from you.
- To keep things easy we will use only keys without any additional password
- protection etc.
+ You will need to set the connection up so that the client doesn't ask for any password from you.
+ To keep things easy we will use only keys without any additional password protection etc.
\end_layout
\begin_deeper
.
Save your private .ppk key file and put the public one on the server side.
- If the SVN server runs on Linux, note that the format of the public key
- is not compatible with Linux openssh and you will need to direcly copy-paste
- the key from the
+ If the SVN server runs on Linux,
+ note that the format of the public key is not compatible with Linux openssh and you will need to direcly copy-paste the key from the
\begin_inset Quotes eld
\end_inset
status collapsed
\begin_layout Plain Layout
-Exact path depends on Windows version, usually somewhere around
+Exact path depends on Windows version,
+ usually somewhere around
\begin_inset Flex Code
status collapsed
\end_inset
-, section [tunnels], setup ssh command, e.g.
+,
+ section [tunnels],
+ setup ssh command,
+ e.g.
\begin_inset Flex Code
status collapsed
status collapsed
\begin_layout Plain Layout
-It will usually take a lot of time to get exact command right and it depends
- on many things.
- For example do not have some remote server saved as a default session in
- Putty etc.
- If things fail, try to connect via plink without SVN first.
+It will usually take a lot of time to get exact command right and it depends on many things.
+ For example do not have some remote server saved as a default session in Putty etc.
+ If things fail,
+ try to connect via plink without SVN first.
\end_layout
\end_inset
\end_deeper
\begin_layout Enumerate
-Checkout the SVN archive, e.
+Checkout the SVN archive,
+ e.
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Standard
-When the collaborators are mixing Linux and Windows environments, \SpecialChar LyX
- will
- use different line endings inside the .lyx files.
+When the collaborators are mixing Linux and Windows environments,
+ \SpecialChar LyX
+ will use different line endings inside the .lyx files.
This is not a problem as far as \SpecialChar LyX
- functionality is concerned, but the commit
- diffs will be huge and merge-conflicts prone.
+ functionality is concerned,
+ but the commit diffs will be huge and merge-conflicts prone.
Fortunately SVN itself knows
\begin_inset Foot
status collapsed
status collapsed
\begin_layout Plain Layout
-For the lazy guys:
+For the lazy guys:
+
\begin_inset Flex Code
status collapsed
Control
\family default
submenu.
- Please note that if you use password protected access to repository via
- ssh, you will be asked in terminal window.
+ Please note that if you use password protected access to repository via ssh,
+ you will be asked in terminal window.
\SpecialChar LyX
was tested against GIT 1.7.
\begin_inset Foot
\end_layout
\begin_layout Standard
-One big difference of GIT and the other supported version control systems
- is the distributed nature of GIT: With traditional version control systems
- there is one central server which hosts the repository.
- Users commit their changes to the server, and get updates made by other
- users from it.
- With GIT, users commit to a local repository.
- The local repository can be synchronized with one or more remote repositories
- using the
+One big difference of GIT and the other supported version control systems is the distributed nature of GIT:
+ With traditional version control systems there is one central server which hosts the repository.
+ Users commit their changes to the server,
+ and get updates made by other users from it.
+ With GIT,
+ users commit to a local repository.
+ The local repository can be synchronized with one or more remote repositories using the
\begin_inset Flex Code
status collapsed
GIT commands.
\SpecialChar LyX
does not interact in any way with remote GIT repositories.
- It works exclusively with the local repository in a very similar way as
- with a central CVS or SVN repository.
+ It works exclusively with the local repository in a very similar way as with a central CVS or SVN repository.
If you use remote GIT repositories you need to do the
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-If your document is not under revision control, this is the only item shown
- in the menu.
- And if it is under revision control, the
+If your document is not under revision control,
+ this is the only item shown in the menu.
+ And if it is under revision control,
+ the
\family sans
Register
\family default
\end_layout
\begin_layout Standard
-This command registers in GIT your document ONLY in case you have already
- the documents directory under GIT control (in particular
+This command registers in GIT your document ONLY in case you have already the documents directory under GIT control (in particular
\family typewriter
.git/index
\family default
\end_layout
\begin_layout Standard
-Then you are asked interactively to supply an initial description of the
- document.
+Then you are asked interactively to supply an initial description of the document.
Don't forget that registered file is not yet committed.
\end_layout
\begin_layout Standard
-GIT command that is run:
+GIT command that is run:
+
\family typewriter
git add
\begin_inset Quotes qld
\end_layout
\begin_layout Standard
-When you are finished editing a file, you commit your changes.
- When you do this, you are asked for a description of the changes.
+When you are finished editing a file,
+ you commit your changes.
+ When you do this,
+ you are asked for a description of the changes.
After that changes are committed.
\end_layout
\begin_layout Standard
-GIT command:
+GIT command:
+
\family typewriter
git commit -q -m"<description>" <file-name>
\end_layout
\end_layout
\begin_layout Standard
-This will discard all changes made to the document since the last check
- in.
+This will discard all changes made to the document since the last check in.
You get a warning before changes are discarded.
\end_layout
\begin_layout Standard
-GIT command:
+GIT command:
+
\family typewriter
git checkout -q
\begin_inset Quotes qld
This will rename the current document including the version history.
It requires a clean document without any changes since the last checkin.
You are asked for a file name and a description of the rename operation.
- After that the document is renamed, both locally and in the repository.
- If the parent directories of the new and old file names differ, all relative
- paths of included files are adjusted (like in
+ After that the document is renamed,
+ both locally and in the repository.
+ If the parent directories of the new and old file names differ,
+ all relative paths of included files are adjusted (like in
\family sans
File\SpecialChar menuseparator
Save As
\family default
\SpecialChar ldots
).
- Finally, the document is reloaded using the new name.
+ Finally,
+ the document is reloaded using the new name.
\end_layout
\begin_layout Labeling
\begin_inset space ~
\end_inset
-commands:
+commands:
+
\begin_inset space ~
\end_inset
\begin_layout Standard
\SpecialChar LyX
- supports GIT hash number of the last commit to the file,
+ supports GIT hash number of the last commit to the file,
+
\change_inserted 1119979965 1564297456
-its abbreviated form,
+its abbreviated form,
+
\change_unchanged
-author name, date and time of last commit.
+author name,
+ date and time of last commit.
All those are extracted from
\family typewriter
git log -n 1 --pretty=format:%H%n
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:VCS-Revision-Information"
+nolink "false"
\end_inset
\end_inset
function \SpecialChar LyX
- power users are allowed to create their own commands for revision
- control.
+ power users are allowed to create their own commands for revision control.
\end_layout
\begin_layout Standard
-As an example you can see how two TortoiseSVN commands could be integrated
- directly:
+As an example you can see how two TortoiseSVN commands could be integrated directly:
\end_layout
\begin_layout Description
-Commit:
+Commit:
+
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Description
-Revert:
+Revert:
+
\begin_inset Flex Code
status collapsed
\end_layout
\begin_layout Standard
-One of the typical uses of version control is to inspect the changes between
- revisions, usually by creating
+One of the typical uses of version control is to inspect the changes between revisions,
+ usually by creating
\begin_inset Flex Code
status collapsed
\end_inset
dumps.
- While this is useful for plain text files, it is much less useful in the
- case of \SpecialChar LyX
- files, which have more a complicated structure.
+ While this is useful for plain text files,
+ it is much less useful in the case of \SpecialChar LyX
+ files,
+ which have more a complicated structure.
Hence we provide binding to the Document comparison feature.
There are two ways of calling this feature – either by direct call of
\begin_inset Flex Code
arg "vc-compare"
\end_inset
-, respectively.
- One can either compare two chosen revisions of the document or he can simply
- compare the current version of edited text with older revisions (where
- '
+,
+ respectively.
+ One can either compare two chosen revisions of the document or he can simply compare the current version of edited text with older revisions (where '
\begin_inset Flex Noun
status collapsed
\end_inset
-' revisions back means comparison of the edited file with last commited
- revision).
+' revisions back means comparison of the edited file with last commited revision).
\end_layout
\begin_layout Standard
-This feature is supported for SVN and RCS though due to the more complicated
- versioning scheme of RCS there is a constraint – when addressing the revisions
- in dialog, numbers always point to the last number in RCS revision number,
+This feature is supported for SVN and RCS though due to the more complicated versioning scheme of RCS there is a constraint – when addressing the revisions in dialog,
+ numbers always point to the last number in RCS revision number,
i.e.
'35' in '1.2.35'.
- We don't currently support GIT addressing of revisions, one can just compare
- edited document with its revision X steps backs, where X is addressed as
-
+ We don't currently support GIT addressing of revisions,
+ one can just compare edited document with its revision X steps backs,
+ where X is addressed as
\begin_inset Flex Code
status collapsed
\noun default
(kayvan@sylvan.com)
\noun on
-,
+,
+
\noun default
original documentation written by
\noun on
\begin_layout Standard
The main purpose of this documentation is to show you how to use \SpecialChar LyX
- for literate
- programming, where it is assumed that you are familiar with this programming
- technique, and know what
+ for literate programming,
+ where it is assumed that you are familiar with this programming technique,
+ and know what
\begin_inset Quotes eld
\end_inset
\end_inset
means.
- If that is not the case, please follow the web links provided in the following
- sections.
- There is a lot of good documentation out there covering old development
- history to the latest tools tips.
+ If that is not the case,
+ please follow the web links provided in the following sections.
+ There is a lot of good documentation out there covering old development history to the latest tools tips.
\end_layout
\begin_layout Standard
It is also assumed that you are familiar with \SpecialChar LyX
- itself to a point that you
- are comfortable changing your \SpecialChar LyX
- preferences, and X resources file.
+ itself to a point that you are comfortable changing your \SpecialChar LyX
+ preferences,
+ and X resources file.
If that is not the case please refer to other \SpecialChar LyX
- documentation to cover your
- specific needs.
+ documentation to cover your specific needs.
\end_layout
\begin_layout Subsection
\end_layout
\begin_layout Standard
-From the Literate Programming FAQ:
+From the Literate Programming FAQ:
+
\end_layout
\begin_layout Quotation
-Literate programming is the combination of documentation and source together
- in a fashion suited for reading by human beings.
- In fact, literate programs should be enjoyable reading, even inviting!
- (Sorry Bob, I couldn't resist!) In general, literate programs combine source
- and documentation in a single file.
- Literate programming tools then parse the file to produce either readable
- documentation or compilable source.
+Literate programming is the combination of documentation and source together in a fashion suited for reading by human beings.
+ In fact,
+ literate programs should be enjoyable reading,
+ even inviting!
+ (Sorry Bob,
+ I couldn't resist!) In general,
+ literate programs combine source and documentation in a single file.
+ Literate programming tools then parse the file to produce either readable documentation or compilable source.
The WEB style of literate programming was created by D.
\begin_inset space \thinspace{}
\end_inset
\begin_layout Quotation
There are three distinguishing characteristics.
- In order of importance, they are:
+ In order of importance,
+ they are:
+
\end_layout
\begin_deeper
\end_layout
\begin_layout Itemize
-typeset documentation, especially diagrams and mathematics
+typeset documentation,
+ especially diagrams and mathematics
\end_layout
\end_deeper
\begin_layout Standard
-Now that I sparked your curiosity, take a look in the references.
+Now that I sparked your curiosity,
+ take a look in the references.
\end_layout
\begin_layout Subsubsection
\begin_inset Quotes erd
\end_inset
- for particular programming languages, while other have general scope.
+ for particular programming languages,
+ while other have general scope.
I selected
\noun on
Noweb
\end_layout
\begin_layout Itemize
-It has a open architecture, i.
+It has a open architecture,
+ i.
\begin_inset space \thinspace{}
\end_inset
\emph on
Filters
\emph default
-are programs that read a given data stream and output a manipulated data
- stream.
- That way, a WEB file (consisting of literate code) can be turned into a
- file consisting only of C program code or \SpecialChar LaTeX
+are programs that read a given data stream and output a manipulated data stream.
+ That way,
+ a WEB file (consisting of literate code) can be turned into a file consisting only of C program code or \SpecialChar LaTeX
code.
\end_layout
\end_layout
\begin_layout Itemize
-There is a good selection of filters available already (the HTML is one
- of them).
+There is a good selection of filters available already (the HTML is one of them).
\end_layout
\begin_layout Itemize
\end_layout
\begin_layout Standard
-The Noweb web page can be found at:
+The Noweb web page can be found at:
+
\end_layout
\begin_layout Quote
\end_layout
\begin_layout Standard
-Starting from there you can reach many other interesting links and even
- some literate program examples.
+Starting from there you can reach many other interesting links and even some literate program examples.
\end_layout
\begin_layout Subsection
\begin_layout Standard
The \SpecialChar LyX
support for Literate Programming is provided by using the generic \SpecialChar LyX
-
converters mechanism.
This support is provided in a
\begin_inset Quotes eld
\begin_inset Quotes erd
\end_inset
- way, i.
+ way,
+ i.
\begin_inset space \thinspace{}
\end_inset
\end_inset
you will be able to use this new \SpecialChar LyX
- feature with some other literate programming
- tool of your choice by just changing your \SpecialChar LyX
+ feature with some other literate programming tool of your choice by just changing your \SpecialChar LyX
preferences.
\end_layout
\begin_layout Standard
If you have installed Noweb and \SpecialChar LyX
- successfully, whenever you open a new document,
- after you have chosen its document class, use the
+ successfully,
+ whenever you open a new document,
+ after you have chosen its document class,
+ use the
\family sans
Document\SpecialChar menuseparator
Settings
\end_inset
module.
- If Noweb is correctly installed, when you click on the
+ If Noweb is correctly installed,
+ when you click on the
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- link, you will see the
+ link,
+ you will see the
\begin_inset Quotes eld
\end_inset
\family typewriter
@
\family default
- must be taken literally, i.
+ must be taken literally,
+ i.
\begin_inset space \thinspace{}
\end_inset
\end_inset
\SpecialChar LyX
- should be prevented from making any special interpretation of what has
- been written.
+ should be prevented from making any special interpretation of what has been written.
This is also handled by
\begin_inset Flex Noun
status collapsed
\end_inset
-, that works like a normal text inset but has a free spacing capability.
+,
+ that works like a normal text inset but has a free spacing capability.
\end_layout
\begin_layout Standard
-As a special note, you can also use the
+As a special note,
+ you can also use the
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- construct of Noweb in your chunks to add items to Noweb's identifier cross-refe
-rence:
+ construct of Noweb in your chunks to add items to Noweb's identifier cross-reference:
\end_layout
\begin_layout LyX-Code
\end_layout
\begin_layout LyX-Code
- print "My args: ", args
+ print "My args:
+ ",
+ args
\end_layout
\begin_layout LyX-Code
\end_layout
\begin_layout Standard
-For an example of this usage and the resulting cross-reference output, look
- at the Literate python program in
+For an example of this usage and the resulting cross-reference output,
+ look at the Literate python program in
\emph on
LIBDIR/examples/listerrors.lyx
\emph default
\end_layout
\begin_layout Standard
-At this point you already have a new document file with a proper document
- class, and with some code and text on it.
- How do I print it? The answer is simple, you select
+At this point you already have a new document file with a proper document class,
+ and with some code and text on it.
+ How do I print it?
+ The answer is simple,
+ you select
\family sans
View\SpecialChar menuseparator
DVI,
+
\family default
etc.
Just like you would do for a plain document.
\end_layout
\begin_layout Standard
-To help orientate you, I will now explain what happens inside \SpecialChar LyX
+To help orientate you,
+ I will now explain what happens inside \SpecialChar LyX
:
\end_layout
Update\SpecialChar menuseparator
DVI
\family default
- menu option is chosen, a \SpecialChar LaTeX
+ menu option is chosen,
+ a \SpecialChar LaTeX
file is generated.
\end_layout
\begin_deeper
\begin_layout Standard
-If the document is of any literate class the generated file will be named
- with an extension name defined by the
+If the document is of any literate class the generated file will be named with an extension name defined by the
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- format (defined in the Preferences panel), otherwise the file will have
- the usual
+ format (defined in the Preferences panel),
+ otherwise the file will have the usual
\family typewriter
.tex
\family default
\end_deeper
\begin_layout Enumerate
-Note that the only difference so far is in the name of the file, no special
- processing is required by \SpecialChar LyX
+Note that the only difference so far is in the name of the file,
+ no special processing is required by \SpecialChar LyX
.
Given that you formatted the code using the
\begin_inset Flex Noun
\end_inset
- inset that, by itself, takes care of the business.
+ inset that,
+ by itself,
+ takes care of the business.
\end_layout
\begin_layout Enumerate
If the document is of any literate class \SpecialChar LyX
will then use the internal \SpecialChar LyX
- to
- Noweb converter, followed by the Noweb to \SpecialChar LaTeX
+ to Noweb converter,
+ followed by the Noweb to \SpecialChar LaTeX
converter
\begin_inset Foot
status collapsed
Tools\SpecialChar menuseparator
Preferences
\family default
- panel, under the
+ panel,
+ under the
\begin_inset Quotes eld
\end_inset
\end_deeper
\begin_layout Enumerate
-Finally, \SpecialChar LaTeX
- is invoked and the regular post processing continues as in a plain
- document.
+Finally,
+ \SpecialChar LaTeX
+ is invoked and the regular post processing continues as in a plain document.
\end_layout
\begin_layout Standard
\begin_inset Quotes erd
\end_inset
- is easily achieved by changing the commands that are run by the various
- converters.
+ is easily achieved by changing the commands that are run by the various converters.
\end_layout
\begin_layout Paragraph
\end_layout
\begin_layout Standard
-When the build menu option is chosen or the corresponding button in the
- toolbar is pressed, a \SpecialChar LaTeX
+When the build menu option is chosen or the corresponding button in the toolbar is pressed,
+ a \SpecialChar LaTeX
file is generated just like step 1 above.
- Next, \SpecialChar LyX
+ Next,
+ \SpecialChar LyX
invokes the
\family typewriter
Noweb->Program
\family default
converter.
- This converter needs to be defined by the user and is not installed by
- default, though the Program format is.
+ This converter needs to be defined by the user and is not installed by default,
+ though the Program format is.
This converter (like any other converter) will have two parts:
\end_layout
\begin_layout Enumerate
The converter program itself.
- This program performs the conversion from the one format to the other (in
- this case, from the Noweb format to the Program pseudo-format).
+ This program performs the conversion from the one format to the other (in this case,
+ from the Noweb format to the Program pseudo-format).
\end_layout
\begin_layout Enumerate
The error log parser.
- This is a program whose sole purpose is to rewrite error messages in a
- format that \SpecialChar LyX
+ This is a program whose sole purpose is to rewrite error messages in a format that \SpecialChar LyX
understands.
This makes it possible for \SpecialChar LyX
- to place error boxes in the right places in
- the file buffer.
+ to place error boxes in the right places in the file buffer.
\end_layout
\begin_layout Standard
-The first part, the
+The first part,
+ the
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- setting, should be set to
+ setting,
+ should be set to
\end_layout
\begin_layout LyX-Code
\begin_inset Quotes erd
\end_inset
- (a program or script) with the name of the Noweb file (normally a file
- in the \SpecialChar LyX
+ (a program or script) with the name of the Noweb file (normally a file in the \SpecialChar LyX
temp directory) and the directory path of the original \SpecialChar LyX
file.
\begin_layout Standard
The build will normally take place in \SpecialChar LyX
-'s temporary directory, so the files
- produced by the conversion will be in that directory.
+'s temporary directory,
+ so the files produced by the conversion will be in that directory.
\SpecialChar LyX
- will copy out what it regards as the `main' file, but the
+ will copy out what it regards as the `main' file,
+ but the
\family typewriter
Noweb->Program
\family default
- conversion may produce several files, and so most of these would then be
- deleted when \SpecialChar LyX
+ conversion may produce several files,
+ and so most of these would then be deleted when \SpecialChar LyX
was closed.
- This is why we pass in the NOWEB_OUTPUT_DIR environment variable so that
- the build-script chunk can place the generated files in that location.
+ This is why we pass in the NOWEB_OUTPUT_DIR environment variable so that the build-script chunk can place the generated files in that location.
\end_layout
\begin_layout Paragraph
\end_inset
chunk.
- Generally, the instructions for building your program should be embedded
- in a chunk of its own.
+ Generally,
+ the instructions for building your program should be embedded in a chunk of its own.
The noweb-specific
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Standard
-Typically, such a chunk would look something like this:
+Typically,
+ such a chunk would look something like this:
\end_layout
\begin_layout LyX-Code
\begin_inset Quotes erd
\end_inset
- program for some illustrations of how all of these pieces go together or
- in
+ program for some illustrations of how all of these pieces go together or in
\change_deleted 564990737 1672161756
\emph on
.
\emph default
- Interestingly, these
+ Interestingly,
+ these
\change_deleted 564990737 1672161767
three
\change_unchanged
files show off the language-indepence of the \SpecialChar LyX
- literate programming support
- since they are written in Python
+ literate programming support since they are written in Python
\change_deleted 564990737 1672161782
-, C
+,
+ C
\change_unchanged
and Perl respectively.
\end_layout
\begin_inset space ~
\end_inset
-format Set up via the File Formats tab, this is where the Noweb-specific
- pieces are set up.
+format Set up via the File Formats tab,
+ this is where the Noweb-specific pieces are set up.
The
\family sans
GUI Name
\family typewriter
NoWeb
\family default
-, the file extension is set to
+,
+ the file extension is set to
\family typewriter
.nw
\family default
\begin_inset space ~
\end_inset
-format This is an empty format whose sole purpose is to be the endpoint
- of a conversion (which then allows us to set up a converter for it).
+format This is an empty format whose sole purpose is to be the endpoint of a conversion (which then allows us to set up a converter for it).
\end_layout
\begin_layout Description
\end_inset
of the literate document.
- For Noweb, it is set to
+ For Noweb,
+ it is set to
\begin_inset Quotes eld
\end_inset
\end_inset
.
- As stated above, the Converter is set to
+ As stated above,
+ the Converter is set to
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, with Flags set to
+,
+ with Flags set to
\begin_inset Newline newline
\end_inset
\begin_layout Standard
There is also a new function implemented in the \SpecialChar LyX
- server, the
+ server,
+ the
\begin_inset Quotes eld
\end_inset
-server-goto-file-row" function, to be used with ddd/gdb or other debugger.
+server-goto-file-row" function,
+ to be used with ddd/gdb or other debugger.
\end_layout
\begin_layout Standard
-When debugging code with ddd/gdb, it is possible to invoke a text editor
- at the current execution position with a single key stroke.
+When debugging code with ddd/gdb,
+ it is possible to invoke a text editor at the current execution position with a single key stroke.
The default ddd configuration for that is shift-ctrl-V.
- It happens that you can define the editor command line invocation in ddd
- by accessing the
+ It happens that you can define the editor command line invocation in ddd by accessing the
\family sans
Edit\SpecialChar menuseparator
Preferences\SpecialChar menuseparator
\end_layout
\begin_layout Standard
-With this, whenever you are using ddd and find a point in the program that
- you want to edit, you just press shift-ctrl-V (in the ddd window), and
- ddd will forward this information to \SpecialChar LyX
+With this,
+ whenever you are using ddd and find a point in the program that you want to edit,
+ you just press shift-ctrl-V (in the ddd window),
+ and ddd will forward this information to \SpecialChar LyX
through the \SpecialChar LyX
- server and then the
- \SpecialChar LyX
- window will show the same file with the cursor at the same position ddd
- was pointing to.
- No more guessing or long scrolling to locate a point in the program back
- from debugging !
+ server and then the \SpecialChar LyX
+ window will show the same file with the cursor at the same position ddd was pointing to.
+ No more guessing or long scrolling to locate a point in the program back from debugging !
\end_layout
\begin_layout Standard
Note however that you must enable the \SpecialChar LyX
- server to get this feature working
- (it is disabled by default).
+ server to get this feature working (it is disabled by default).
Sec.
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Starting-the-Server"
+nolink "false"
\end_inset
\begin_layout Standard
There are six new buttons that can be added to your \SpecialChar LyX
toolbar.
- Four of these buttons are short cuts to layout styles:
+ Four of these buttons are short cuts to layout styles:
+
\family sans
Standard
\family default
-,
+,
+
\family sans
Section
\family default
-,
+,
+
\family sans
\SpecialChar LaTeX
\family default
-, and
+,
+ and
\family sans
\SpecialChar LyX
-Code
\family default
-, one for the custom inset
+,
+ one for the custom inset
\family sans
Chunk
\family default
.
One of the things that bothers people is the \SpecialChar LaTeX
font color.
- The default color is red, since the chunks uses \SpecialChar LaTeX
- font, and there is a lot
- of chunks in literate documents, you may get tired of seeing everything
- in red.
+ The default color is red,
+ since the chunks uses \SpecialChar LaTeX
+ font,
+ and there is a lot of chunks in literate documents,
+ you may get tired of seeing everything in red.
You can change it by going to the tabs
\family sans
Look&Feel
\family default
-,
+,
+
\family sans
Colors.
\end_layout
\begin_layout Standard
The next thing is the visible presence of the newline character in the screen.
- You can choose the color of this particular character and make it blend
- in the background.
- I recommend you choosing a color that is close to the background but not
- equal, that way you still can see it is there, but it is not bothering
- you anymore.
+ You can choose the color of this particular character and make it blend in the background.
+ I recommend you choosing a color that is close to the background but not equal,
+ that way you still can see it is there,
+ but it is not bothering you anymore.
\end_layout
\begin_layout Subsection
You can do everything with \SpecialChar LyX
that you can do with \SpecialChar LaTeX
.
- However, \SpecialChar LyX
+ However,
+ \SpecialChar LyX
cannot support every \SpecialChar LaTeX
feature directly.
But you can always use \SpecialChar TeX
Code.
This chapter shows you some more special things you might want to use.
- For other special things you can do with figures, tables, floats, boxes
- and notes, have a look at the
+ For other special things you can do with figures,
+ tables,
+ floats,
+ boxes and notes,
+ have a look at the
\emph on
Embedded
\begin_inset space ~
projects / features.git / commitdiff