\series default
,
\series bold
-marginnote
+lettrine, marginnote, picinpar
\series default
-, and
+ and
\series bold
sidecap
\series default
\end_layout
\begin_layout Standard
-In some cases you might want to resume the list with a different number
- than the next one.
- Or you want to start a new enumeration, but with a different number.
- This is also possible by adding an optional argument to the first list
- item.
+Perhaps you might want to resume the list with a different number than the
+ next one.
+ Or you want to start a new enumeration with a defined number.
+ This is possible by adding an optional argument to the first list item
+ of a normal new enumeration.
There insert the command
\end_layout
\begin_layout Standard
In some cases you might want less or more vertical space between the items
of a list.
- For example the default space is too much in your opinion:
+ For example the default space is too much in your opinion in this case:
\end_layout
\begin_layout Itemize
\series bold
nolistsep
\series default
- to get no space like in this example:
+ to get no additional list space like in this example:
\end_layout
\begin_layout Itemize
\end_layout
\begin_layout Itemize
-with no additional
+without additional
\end_layout
\begin_layout Itemize
\begin_layout Standard
There are also many commands available to change the horizontal spacing
and indentation.
- Here is an example where the indentation was changed to the negative one
- of the paragraphs in the document and the label separation was set to 2
+ Here is an example where the indentation was changed to the one of the
+ paragraphs in the document and the label separation was set to 2
\begin_inset space \thinspace{}
\end_inset
-cm.
+cm so that the number is in the page margin:
\end_layout
\begin_layout Enumerate
\series default
,
\series bold
-marginnote
+lettrine, marginnote, picinpar
\series default
und
\series bold
\end_layout
\begin_layout Standard
-
-\lang english
-In some cases you might want to resume the list with a different number
- than the next one.
- Or you want to start a new
-\lang ngerman
-Aufzählung
-\lang english
-, but with a different
-\lang ngerman
-Nummer
-\lang english
-.
- This is also possible by adding an optional argument to the first list
- item.
- There insert the
-\lang ngerman
-Befehl
+Vielleicht wollen Sie die Liste mit einer anderen Nummer als die eigentlich
+ folgende fortsetzen.
+ Oder Sie wollen eine neue Aufzählung starten, die mit einer bestimmten
+ Nummer beginnen soll.
+ Dies ist möglich, indem Sie in einer neuen, normalen Liste ein optionales
+ Argument im ersten Listeneintrag einfügen und darin den Befehl
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-wobei
+verwenden.
+ Dabei ist
\emph on
Nummer
\emph default
- die Nummer ist, mit der Sie die Liste fortsetzen wollen.
+ die Nummer, mit der Sie die Liste fortsetzen wollen.
Ein Beispiel:
\end_layout
\end_layout
\begin_layout Standard
+In manchen Fällen wollen Sie vielleicht weniger vertikalen Abstand zwischen
+ den Listeneinträgen haben.
+ Z.
+\begin_inset space \thinspace{}
+\end_inset
-\lang english
-In some cases you might want less or more vertical space between the items
- of a list.
- For example the default space is too much in your opinion:
+B.
+\begin_inset space ~
+\end_inset
+
+ ist ihrer Meinung nach zu viel Abstand in dieser Liste:
\end_layout
\begin_layout Itemize
-
-\lang english
-A bullet list
+Eine Auf\SpecialChar \textcompwordmark{}
+listung
\end_layout
\begin_layout Itemize
-
-\lang english
-with standard spacing
+mit Standard-Abstand
\end_layout
\begin_layout Standard
-
-\lang english
-You can decrease the space by adding an optional argument to the first item
- of the list.
- There add the
-\lang ngerman
- Befehl
+Der Abstand kann verkleinert werden, indem man ein optionales Argument im
+ ersten Listeneintrag verwendet.
+ Darin fügt man den Befehl
\series bold
nolistsep
\series default
-
-\lang english
-to get no space like in this
-\lang ngerman
- Beispiel
-\lang english
-:
+ ein, der den zusätzlichen Listenabstand entfernt, wie in diesem Beispiel:
\end_layout
\begin_layout Itemize
\end_inset
-
-\lang english
-A bullet list
+Eine Auf\SpecialChar \textcompwordmark{}
+listung
\end_layout
\begin_layout Itemize
-
-\lang english
-with no additional
+ohne zusätzlichen
\end_layout
\begin_layout Itemize
-
-\lang english
-vertical space
+vertikalen Abstand
\end_layout
\begin_layout Standard
-Im Abstand hinzuzufügen können Sie verschiedene andere Befehle des LaTeX-Pakets
+Um Abstand hinzuzufügen, können Sie verschiedene andere Befehle des LaTeX-Pakets
\series bold
enumitem
\end_layout
\begin_layout Standard
-
-\lang english
-There are also many
-\lang ngerman
-Befehle
-\lang english
- available to change the horizontal spacing and indentation.
- Here is an
-\lang ngerman
-Beispiel
-\lang english
- where the indentation was changed to the negative one of the paragraphs
- in the document and the label separation was set to
-\lang ngerman
- 2
+Es gibt zudem viele Befehle mit denen horizontale Abstände und der Einzug
+ eingestellt werden kann.
+ Hier ist ein Beispiel bei dem der Einzug auf den Einzug der Absätze des
+ Dokuments gesetzt wurde und der Abstand zwischen Nummer und Text auf 2
\begin_inset space \thinspace{}
\end_inset
-cm.
+cm, so dass sich die Nummer im Seitenrand befindet:
\end_layout
\begin_layout Enumerate
\end_layout
\begin_layout Enumerate
-
-\lang english
-with negative indentation
+mit negativem Einzug
\end_layout
\begin_layout Subsubsection
status collapsed
\begin_layout Plain Layout
+
http://mirrors.ctan.org/macros/latex/contrib/enumitem/enumitem.pdf
\end_layout
\begin_layout Standard
\begin_inset Note Note
-status collapsed
+status open
\begin_layout Plain Layout
Para exportar todas las partes de este documento a PDF, PS, o DVI, deben
\series default
,
\series bold
-marginnote
+lettrine, marginnote, picinpar
\series default
y
\series bold
\begin_layout Standard
\lang english
-In some cases you might want to resume the list with a different number
- than the next one.
- Or you want to start a new enumeration, but with a different number.
+Perhaps you might want to resume the list with a different number than the
+ next one.
+ Or you want to start a new enumeration with a defined number.
This is also possible by adding an optional argument to the first list
- item.
+ item of a normal new enumeration.
There insert the command
\end_layout
\lang english
In some cases you might want less or more vertical space between the items
of a list.
- For example the default space is too much in your opinion:
+ For example the default space is too much in your opinion in this case:
\end_layout
\begin_layout Itemize
\series bold
nolistsep
\series default
- to get no space like in this example:
+ to get no additional list space like in this example:
\end_layout
\begin_layout Itemize
\lang english
There are also many commands available to change the horizontal spacing
and indentation.
- Here is an example where the indentation was changed to the negative one
- of the paragraphs in the document and the label separation was set to 2
+ Here is an example where the indentation was changed to the one of the
+ paragraphs in the document and the label separation was set to 2
\begin_inset space \thinspace{}
\end_inset
-cm.
+cm so that the number is in the page margin:
\end_layout
\begin_layout Enumerate
status collapsed
\begin_layout Plain Layout
+
http://mirrors.ctan.org/macros/latex/contrib/enumitem/enumitem.pdf
\end_layout
\begin_layout Standard
\begin_inset Note Note
-status collapsed
-
-\begin_layout Plain Layout
-Si votre distribution LaTeX est un peu ancienne (TeXLive 2007 par exemple),
-
-\begin_inset Quotes fld
-\end_inset
-
-Visionner
-\begin_inset Quotes frd
-\end_inset
-
- ou
-\begin_inset Quotes fld
-\end_inset
-
-Exporter
-\begin_inset Quotes frd
-\end_inset
-
- en PDF ne fonctionnera pas du fait d'un conflit entre
-\family typewriter
-varioref/hyperref
-\family default
- et le caractère
-\begin_inset Quotes fld
-\end_inset
-
-:
-\begin_inset Quotes frd
-\end_inset
-
- apparaissant dans certaines étiquettes.
- Pour résoudre ce problème, vous pouvez:
-\end_layout
-
-\begin_layout Itemize
-soit désactiver
-\family typewriter
-hyperref
-\family default
- dans le menu
-\family sans
-Document\SpecialChar \menuseparator
-Paramètres\SpecialChar \menuseparator
-Propriété PDF
-\family default
-;
-\end_layout
-
-\begin_layout Itemize
-Vous pouvez trouver la dernière version au format PDF de ce manuel ici :
-\begin_inset Newline newline
-\end_inset
-
-
-\series bold
-http://wiki.lyx.org/LyX/DocumentationDevelopment#UserGuide
-\series default
-;
-\end_layout
-
-\begin_layout Itemize
-soit mettre à jour votre distribution (en installant par exemple au moins
- TeXLive 2008)
-\end_layout
-
-\end_inset
-
-
-\begin_inset Note Note
-status collapsed
+status open
\begin_layout Plain Layout
Pour pouvoir exporter ce document en PDF, PS ou DVI, les paquetages LaTeX
\series default
,
\series bold
-marginnote
+lettrine, marginnote, picinpar
\series default
, et
\series bold
\begin_layout Standard
\lang english
-In some cases you might want to resume the list with a different number
- than the next one.
- Or you want to start a new enumeration, but with a different number.
+Perhaps you might want to resume the list with a different number than the
+ next one.
+ Or you want to start a new enumeration with a defined number.
This is also possible by adding an optional argument to the first list
- item.
+ item of a normal new enumeration.
There insert the command
\end_layout
\lang english
In some cases you might want less or more vertical space between the items
of a list.
- For example the default space is too much in your opinion:
+ For example the default space is too much in your opinion in this case:
\end_layout
\begin_layout Itemize
\series bold
nolistsep
\series default
- to get no space like in this example:
+ to get no additional list space like in this example:
\end_layout
\begin_layout Itemize
\lang english
There are also many commands available to change the horizontal spacing
and indentation.
- Here is an example where the indentation was changed to the negative one
- of the paragraphs in the document and the label separation was set to 2
+ Here is an example where the indentation was changed to the one of the
+ paragraphs in the document and the label separation was set to 2
\begin_inset space \thinspace{}
\end_inset
-cm.
+cm so that the number is in the page margin:
\end_layout
\begin_layout Enumerate
status collapsed
\begin_layout Plain Layout
+
http://mirrors.ctan.org/macros/latex/contrib/enumitem/enumitem.pdf
\end_layout
\series default
・
\series bold
+lettrine
+\series default
+・
+\series bold
marginnote
\series default
・
\series bold
+picinpar
+\series default
+・
+\series bold
sidecap
\series default
の各LaTeXパッケージが導入されている必要があります。これらが導入されていなくても、文書を書き出すことはできますが、これらのパッケージが必要な節は出力には表示
\begin_layout Standard
\lang english
-In some cases you might want to resume the list with a different number
- than the next one.
- Or you want to start a new enumeration, but with a different number.
+Perhaps you might want to resume the list with a different number than the
+ next one.
+ Or you want to start a new enumeration with a defined number.
This is also possible by adding an optional argument to the first list
- item.
+ item of a normal new enumeration.
There insert the command
\end_layout
\lang english
In some cases you might want less or more vertical space between the items
of a list.
- For example the default space is too much in your opinion:
+ For example the default space is too much in your opinion in this case:
\end_layout
\begin_layout Itemize
\series bold
nolistsep
\series default
- to get no space like in this example:
+ to get no additional list space like in this example:
\end_layout
\begin_layout Itemize
\lang english
There are also many commands available to change the horizontal spacing
and indentation.
- Here is an example where the indentation was changed to the negative one
- of the paragraphs in the document and the label separation was set to 2
+ Here is an example where the indentation was changed to the one of the
+ paragraphs in the document and the label separation was set to 2
\begin_inset space \thinspace{}
\end_inset
-cm.
+cm so that the number is in the page margin:
\end_layout
\begin_layout Enumerate
status collapsed
\begin_layout Plain Layout
+
http://mirrors.ctan.org/macros/latex/contrib/enumitem/enumitem.pdf
\end_layout
projects / features.git / commitdiff