-#LyX 1.5.2svn created this file. For more info see http://www.lyx.org/
+#LyX 1.5.1 created this file. For more info see http://www.lyx.org/
\lyxformat 276
\begin_document
\begin_header
L\kern-.1667em\lower.25em\hbox{Y}\kern-.125emX\@}
{LyX }}
-
% define a short command for \textvisiblespace
\newcommand{\spce}{\textvisiblespace}
\end_preamble
\end_inset
is printed with sub- and superscript letters.
- More on ERT is described in section
+ More on ERT is described in section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:ERT"
\end_inset
-, the printout of proper names like LaTeX is explained in section
+, the printout of proper names like LaTeX is explained in section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sub:LyX's-Proper-Names"
Selecting a template will automatically set certain layout features for
the document, features you would otherwise need to change manually.
They can be of use for certain classes, especially those for writing letters
- (see sec.
-
+ (see section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:doc-classes"
Version\InsetSpace ~
Control
\family default
- are is useful if more people work on the same document at the same time
+ are useful if more people work on the same document at the same time
\begin_inset Foot
status collapsed
\end_inset
+\begin_inset LatexCommand label
+name "sec:Basic-Editing-Features"
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
\begin_layout Itemize
+\family sans
+Paste\InsetSpace ~
+Special
+\end_layout
+
+\begin_layout Itemize
+
\family sans
Find\InsetSpace ~
&\InsetSpace ~
it with what you just typed.
You'll have to do an
\family sans
-\bar under
-U
-\bar default
-ndo
+Undo
\family default
to get back the lost text.
+\end_layout
+
+\begin_layout Standard
+You can also copy text between LyX and other programs by cut, copy and paste.
The submenu of
\family sans
Paste\InsetSpace ~
shows you a list with the last strings you have pasted.
\end_layout
+\begin_layout Standard
+The menu
+\family sans
+Edit\SpecialChar \menuseparator
+Paste\InsetSpace ~
+Special\SpecialChar \menuseparator
+Plain\InsetSpace ~
+Text, Join\InsetSpace ~
+Lines
+\family default
+ will insert the text in the clipboard so that the whole text is inserted
+ as
+\emph on
+one
+\emph default
+ paragraph.
+ A new paragraph is started when there is a blank line in the file.
+ Without
+\family sans
+Join\InsetSpace ~
+Lines
+\family default
+, the text is inserted as Paragraphs, where the line breaks of the text
+ will start a new paragraph.
+\end_layout
+
\begin_layout Standard
The
\family sans
\end_inset
+\begin_inset LatexCommand label
+name "sec:Undo-and-Redo"
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
Tab
\family default
There is no such thing as a tab stop in LyX.
- If you don't understand this, go read Sections
+ If you don't understand this, go read sections\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:parindentintro"
\end_inset
-, especially Section\InsetSpace ~
+, especially section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Lists"
Subsubsection
\family default
headings, and so on.
- We'll describe these headings fully in section
+ We'll describe these headings fully in section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sub:Headings"
\family sans
Separation
\family default
- of paragraphs is described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ of paragraphs is described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:parindentintro"
.
LyX will still reset the nesting depth, however.
Usually, starting a new paragraph resets both the paragraph environment
- and the nesting depth (for more on nesting see section
+ and the nesting depth (for more on nesting see section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:nest"
after each name means that these headings are not numbered.
They work the same as their numbered counterparts but won't appear in the
- table of contents, see sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ table of contents, see section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:toc"
In fact, LyX changes the labels on some list items depending on how it
is nested.
If you intend to use any of the list paragraph environments, we suggest
- you read all of section
+ you read all of section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:nest"
\end_layout
\begin_layout Itemize
-See section
+See section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:nest"
\begin_layout Standard
Notice how the space between items decreases with increasing depth.
We'll explain nesting and all the tricks you can do with different depths
- in section
+ in section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:nest"
Enumerate
\family default
environments than we've stated here.
- You should read section
+ You should read section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:nest"
Space
\family default
.
- See sec.
-
+ See section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sub:Protected-blanks"
environments inside one another, nest them in other types of lists, and
so on.
They work just like the other list paragraph environments.
- Read section
+ Read section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:nest"
\family sans
HFills
\family default
- later in section
+ later in section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sub:Horizontal-Space"
\begin_layout Standard
For a detailed description of LyX's bibliography handling, have a look at
- in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Bibliography"
\begin_layout Enumerate
This is level #3.
Even though we've changed levels, LyX is still using a lowercase Roman
- numeral as the label.
- Why?
+ numeral as the label.Why?
\end_layout
\begin_layout Enumerate
\begin_layout Standard
The following two sorts of spaces are not yet supported by LyX, so that
- you have to use ERT, see sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ you have to use ERT, see section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:ERT"
\end_layout
\begin_layout Standard
-You can use all length units listed in Appendix\InsetSpace ~
+You can use all length units listed in appendix\InsetSpace ~
\begin_inset LatexCommand ref
reference "cha:Units-available-in"
LaTeX is very good at linebreaking.
There are, however, a number of situations where it is necessary to actively
set a linebreak, e.g.
- in a poem or for an address (see sections
+ in a poem or for an address (see sections\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:quote"
\begin_layout Quote
More information is given in section
\newline
-2.2.
+
+\begin_inset LatexCommand ref
+reference "sec:quote"
+
+\end_inset
+
+.
\end_layout
to be accented with the grave.
\newline
More about ERT and LaTeX-commands is described
- in section
+ in section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:ERT"
\begin_layout Standard
The LaTeX-command prevents text to be breaked at the end of a line.
- It is explained in section
+ It is explained in section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sub:Hyphenation"
status collapsed
\begin_layout Standard
-For more on phantoms see section
+For more on phantoms see section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sub:Other-space-variants"
Protected\InsetSpace ~
Blank
\family default
- after lowercase abbreviations (see section
+ after lowercase abbreviations (see section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sub:Protected-blanks"
There you'll also find tips and tricks for special cases.
\end_layout
+\begin_layout Section
+Notes
+\begin_inset LatexCommand index
+name "Notes"
+
+\end_inset
+
+
+\begin_inset LatexCommand label
+name "sec:Notes"
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+LyX offers you a few types of notes to add to your document:
+\end_layout
+
+\begin_layout Description
+LyX\InsetSpace ~
+Note This note type is for internal notes that won't appear in the output.
+\newline
+
+\begin_inset Note Note
+status open
+
+\begin_layout Standard
+This is text in a note box that doesn't appear in the output.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Comment This note also doesn't appear in the output but it appears as LaTeX-comm
+ent, when you export the document to LaTeX via the menu
+\family sans
+File\SpecialChar \menuseparator
+Export\SpecialChar \menuseparator
+LaTeX (pdflatex) / (plain)
+\family default
+.
+\newline
+
+\begin_inset Note Comment
+status open
+
+\begin_layout Standard
+This is text in a note box that only appears as comment in LaTeX-files.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Greyed\InsetSpace ~
+Out This note will appear in the output as grey text.
+\newline
+
+\newline
+
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Standard
+This is text
+\begin_inset Foot
+status open
+
+\begin_layout Standard
+This is an example footnote within a greyed out note.
+\end_layout
+
+\end_inset
+
+ of a comment that appears in the output as grey text.
+\end_layout
+
+\end_inset
+
+
+\newline
+
+\newline
+As you can see in the example, the first line of greyed out notes is a bit
+ indented and greyed out notes can have footnotes.
+\end_layout
+
+\begin_layout Description
+Framed This note will appear in the output as framed text.
+
+\begin_inset Note Framed
+status open
+
+\begin_layout Standard
+This is text in a note box that appears framed in the output.
+\end_layout
+
+\end_inset
+
+ In contrary to framed boxes like the one in section\InsetSpace ~
+
+\begin_inset LatexCommand ref
+reference "sub:ERT-Boxes"
+
+\end_inset
+
+, the frame uses always the whole text width and the note is set into its
+ own paragraph.
+\end_layout
+
+\begin_layout Description
+Shaded This note will appear in the output with red background color.
+\begin_inset Note Shaded
+status open
+
+\begin_layout Standard
+This text in a note box appears in the output with red background.
+\end_layout
+
+\end_inset
+
+In contrary to colored boxes, the note uses always the whole text width
+ and the note is set into its own paragraph.
+\end_layout
+
+\begin_layout Standard
+Notes are inserted with the toolbar button
+\begin_inset Graphics
+ filename ../../../../Programme/LyX 1.5.1/Resources/./images/note-insert.xpm
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+
+ or the menu
+\family sans
+Insert\SpecialChar \menuseparator
+Note
+\family default
+.
+ Right-click on the appearing note box to select the note type.
+\end_layout
+
\begin_layout Section
Footnotes
\begin_inset LatexCommand index
Subfigure
\family default
option here if the image is inside a figure float.
- This option is explained in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ This option is explained in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Figure-Floats"
\begin_layout Standard
If you need image captions and want to reference images, you have to put
- the image into a float, see sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ the image into a float, see section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Figure-Floats"
\begin_layout Standard
You can insert images in any known file format.
- But as we explained in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ But as we explained in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Output-file-formats"
\family default
in the background to convert the images to the right format.
To increase your workflow by avoiding these conversions in the background,
- you can use only the image formats listed in the subsections of sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ you can use only the image formats listed in the subsections of section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Output-file-formats"
The vertical alignment of a column can only be adjusted when a column width
is given.
A given width will allow the cell to have linebreaks and multiple paragraphs
- of text, see sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ of text, see section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Table-Cells"
As the floating often destroys the context between the text and the image/table
, every float can be referenced in the text.
Floats are therefore numbered.
- Referencing is described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ Referencing is described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Cross-References"
of\InsetSpace ~
Figures
\family default
- as described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ as described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:ListsOf"
\family sans
LyX-Code
\family default
-, described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+, described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:LyX-Code"
The width and placement of the float is adjusted by right-clicking on the
float box.
-
+ Figure\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "cap:This-is-a"
Rotate\InsetSpace ~
sideways
\family default
- is used to rotate floats, see section
+ is used to rotate floats, see section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sub:Rotated-Floats"
\family sans
Horizontal Fills
\family default
- as described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ as described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Horizontal-Space"
\begin_layout Standard
Note that by default, the superscript or subscript is only for the single
symbol to the left, which changes the spacing and alignment; you should
- read section
+ read section\InsetSpace ~
+
\begin_inset LatexCommand ref
reference "sec:Grouping"
lim
\series default
.
- Have a look at sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ Have a look at section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:math-functions"
\begin_layout Standard
For some mathematical objects, like the limes, the macro changes the way
- that subscripts are placed, like described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ that subscripts are placed, like described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Operators-with-Limits"
\end_inset
-The parentheses aren't automatic, but you can add them as described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+The parentheses aren't automatic, but you can add them as described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Brackets-and-Delimiters"
\end_inset
).
- The other types are described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ The other types are described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:AMS-Formula-Types"
\end_layout
\begin_layout Standard
-The properties of LyX's cross-reference box are described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+The properties of LyX's cross-reference box are described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Cross-References"
status collapsed
\begin_layout Standard
-described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Protected-blanks"
If you want to reference a section, put the label in the section heading,
to reference a float, put the label in the caption.
For footnotes you can put the label somewhere in it.
- Referencing formulas is explained in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ Referencing formulas is explained in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Formula-Numbering-and"
\begin_inset LatexCommand index
-name "Listings"
+name "Outline"
\end_inset
\end_layout
\begin_layout Subsection
-The Table of Contents
-\end_layout
+Table of Contents and Outline
+\begin_inset LatexCommand label
+name "sub:Table-of-Contents"
+
+\end_inset
+
+
+\end_layout
\begin_layout Standard
The Table of Contents (TOC) is inserted with the menu
Is is displayed in LyX as a gray box.
If you click on it, the TOC window appears, showing you the TOC entries.
You can jump to a document part by clicking on an entry.
- Thus you can use this window as alternative for the
+ Thus you can use this window as graphical alternative for the
\family sans
Navigate
\family default
\begin_layout Standard
The TOC lists every numbered section automatically.
If you have declared a short title for a section heading, as described
- in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Short-Titles"
Unnumbered sections are not listed in the TOC.
\end_layout
+\begin_layout Standard
+You can use the TOC window also as outline to move and rearrange sections
+ in your documents.
+ The TOC window therefore also appears when you use the menu
+\family sans
+Document\SpecialChar \menuseparator
+Outline
+\family default
+.
+\end_layout
+
\begin_layout Subsection
List of Figures, Tables and Algorithms
\begin_inset LatexCommand label
\end_layout
\begin_layout Itemize
-URLs mustn't end with a backslash!
-\end_layout
-
-\begin_layout Section
-Notes
-\begin_inset LatexCommand index
-name "Notes"
-
-\end_inset
-
-
-\begin_inset LatexCommand index
-name "Comments ! Note boxes"
-
-\end_inset
-
-
-\begin_inset LatexCommand label
-name "sec:Notes"
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-LyX offers you two possibilities of inserting notes and comments to a document
- which don't appear in the printed output: The
-\family sans
-comment
-\family default
- paragraph environment, described in section\InsetSpace ~
-
-\begin_inset LatexCommand ref
-reference "sub:Comment"
-
-\end_inset
-
-, and the
-\family sans
-Note
-\family default
- box.
- Note boxes are inserted by the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Note
-\family default
-.
- The boxes appear in yellow to show the difference to other LyX boxes, but
- the box properties are the same.
- The main advantage of note boxes in comparison to the
-\family sans
-comment
-\family default
- environment is that you can close the box to save space and ease reading
- the normal text.
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Note
-status open
-
-\begin_layout Standard
-This is text in a note box that doesn't appear in the output.
-\end_layout
-
-\end_inset
-
-
+URLs must not end with a backslash!
\end_layout
\begin_layout Section
\family sans
Bibliography
\family default
-, described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+, described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:biblio_environment"
).
Normally one uses a special program to create and edit entries of the database.
- It follows a list of programs for bibliography databases:
+ Here is a list of programs for bibliography databases:
\end_layout
\begin_layout Itemize
Have a look at
\begin_inset LatexCommand cite
after "Chapter 3"
-key "Mittelbach"
+key "latexcompanion"
\end_inset
\end_layout
\begin_layout Section
-Making an Index
+Index
\begin_inset LatexCommand index
name "Index generation"
For a detailed description of LaTeX's index mechanism, have a look at one
of the LaTeX books
\begin_inset LatexCommand cite
-key "Mittelbach,Kopka,Lamport"
+key "latexcompanion,latexguide,latexbook"
\end_inset
\begin_inset Quotes erd
\end_inset
- in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Lists"
\end_inset
.
- In the text field for the itemized list index entry in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ In the text field for the itemized list index entry in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:itemize"
\end_layout
\begin_layout Standard
-for the enumerated list in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+for the enumerated list in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:enumerate"
section.
But sometimes you want to index more pages under the same entry.
E.g if we want to index the paragraph environments, we create an index entry
- in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Paragraph-Environments"
\end_layout
\begin_layout Standard
-and another entry at the end of sec.
-\begin_inset Formula $\,$
-\end_inset
-
+and another entry at the end of section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:LyX-Code"
\begin_inset Quotes erd
\end_inset
- (in sec\SpecialChar \@.
-
-\begin_inset Formula $\,$
-\end_inset
-
+ (in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Image-Formats"
We refer to LaTeX books (
\begin_inset LatexCommand cite
-key "Mittelbach,Kopka,Lamport"
+key "latexcompanion,latexguide,latexbook"
\end_inset
number}
\series default
.
- Have a look at sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ Have a look at section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Short-Introduction-to"
\end_inset
+\begin_inset LatexCommand label
+name "sub:ERT-Boxes"
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
First you have to find out which and therefore look in the LaTeX package
database,
\begin_inset LatexCommand cite
-key "Catalogue"
+key "TeXCatalogue"
\end_inset
DVI
\family default
.
- If you'd like to see your math formulas typeset by LaTeX then install the
- necessary software (see below) and select the
+\end_layout
+
+\begin_layout Standard
+If you'd for example like to see in LyX your math formulas typeset by LaTeX,
+ install the LaTeX-package
+\series bold
+preview-latex
+\series default
+ as explained below, and turn on
\family sans
Instant\InsetSpace ~
preview
\family default
- check box in the
+ in the
\family sans
-Edit\SpecialChar \menuseparator
-Preferences\SpecialChar \menuseparator
+Tools\SpecialChar \menuseparator
+Preferences
+\family default
+dialog under
+\family sans
+Look\InsetSpace ~
+and\InsetSpace ~
+feel\SpecialChar \menuseparator
Graphcis
\family default
- dialog.
+.
\end_layout
\begin_layout Standard
preview
\family default
check box.
+ So to make it work, reopen the documents in LyX.
\end_layout
\begin_layout Standard
check box in the insert dialog.
This latter is useful if you wish to generate a preview of a LaTeX figure,
for example.
- Coming in version 1.4 are previews of the external inset also.
\end_layout
\begin_layout Standard
To get previews working, you'll need the LaTeX package
-\family typewriter
+\series bold
preview-latex
-\family default
- installed.
+\series default
+ (on some systems named simply
+\series bold
+preview
+\series default
+) installed.
You find it in
\begin_inset LatexCommand cite
key "TeXCatalogue"
\family typewriter
netpbm
\family default
- package.
+ package; for LyX on Windows this program will automatically be installed
+ together with LyX.
\end_layout
-\begin_layout Section
-International Support
-\begin_inset LatexCommand index
-name "International support"
-
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
\end_layout
\begin_layout Standard
-This section describes how to use LyX with any language you want.
- LyX comes with a default configuration which supports the English language
- on a U.S.-style keyboard, with a standard U.S.
- paper size and the spell checker set to U.S.
- English.
- You can change any or all of these settings as desired, and you can make
- the changes apply to the current session only, or use them as your new
- default configuration.
+You can furthermore preview the LaTeX source that LyX generates of the whole
+ document or parts of it.
+ Use the menu
+\family sans
+Viewl\SpecialChar \menuseparator
+View\InsetSpace ~
+Source
+\family default
+ and a window will be shown where you can see the LaTeX-source code.
+ The window shows the source of the whole paragraph where the cursor is
+ currently in.
+ You can also select document parts in LyX's main window, then only this
+ selection (when it is more than one paragraph) is shown as source code.
+ To view the whole document as source, enable the corresponding option in
+ the window.
\end_layout
-\begin_layout Standard
-If you have a keyboard suited to the language you are using (for example,
- a German keyboard for writing in German), and you have correctly configured
- your X environment, all you need to do for LyX is tell it your language,
- the character encoding, and desired paper size.
- Refer to
-\begin_inset LatexCommand ref
-reference "sec:langlay"
+\begin_layout Section
+International Support
+\begin_inset LatexCommand index
+name "International support"
\end_inset
- for more information.
+
\end_layout
\begin_layout Standard
-If, however, you have a U.S.-style keyboard and want to write in a different
- language than English, you can use an alternate keymap.
- For example, if you have a U.S.-style keyboard but want to write in Italian,
- you can configure LyX to use an Italian keymap.
- Refer to
-\begin_inset LatexCommand ref
-reference "sec:optkey"
+This section describes how to use LyX with any language you want.
+ For some non-western languages there are special Wiki-pages that explain
+ how to set up LyX to use them:
+\begin_inset LatexCommand cite
+key "Arabic,Armenian,Farsi,Hebrew"
\end_inset
- for details.
-
-\end_layout
-
-\begin_layout Standard
-Finally, you may just want to change a few key mappings or create an entirely
- different keymap (for Vulcan, for instance).
- You may, for example, normally write in Italian on a U.S.
- keyboard but want to include an occasional quotation in German.
- In such a case, you can write your own keyboard mapping or modify an existing
- one to support the characters you want.
-
-\end_layout
-\begin_layout Standard
-The details of how to customize LyX to your own language are
-\emph on
-way
-\emph default
- beyond the scope of this manual.
- You can not only alter the keyboard layout, you can also change the names
- of the menus buttons, etc., to reflect your language.
- If you want to learn more about writing keymap files and tailoring LyX
- to your native tongue, please see the
-\emph on
-Customization
-\emph default
- manual for details.
\end_layout
\begin_layout Subsection
Language Options
-\begin_inset LatexCommand label
-name "sec:langlay"
-
-\end_inset
-
-
\end_layout
\begin_layout Standard
Encoding
\family default
box lets you choose the character encoding map you want to use.
- The default is the
+ When you select the encoding
+\family sans
+LaTeX\InsetSpace ~
+default
+\family default
+, the encoding is used that LaTeX uses by default for the selected language,
+ e.\InsetSpace \thinspace{}
+g.\InsetSpace ~
+ for English it is
+\family sans
+latin1
+\family default
+.
+\end_layout
+
+\begin_layout Standard
+LyX also supports unicode output, which is particularly useful if you need
+ lots of special symbols or non-alphabetic scripts, respectively.
+ If you want to use this (and your LaTeX installation supports unicode,
+ for that matter), the
\family typewriter
-Latin1
+utf8
+\family default
+ encoding is the right choice for most purposes.
+ Besides this, you will find some alternative unicode encodings for specific
+ purposes:
+\family typewriter
+UTF
+\family default
+ and
+\family typewriter
+utf8x
+\family default
+ are provided for CJK languages (Chinese, Japanese, Korean),
+\family typewriter
+utf8-plain
\family default
- encoding, which includes the characters required by the various Western
- European languages.
+, finally, should be chosen for
+\family sans
+XeTeX
+\family default
+, which uses unicode directly, without the help of the LaTeX-package
+\series bold
+inputenc
+\series default
+.
\end_layout
\begin_layout Subsection
Keyboard mapping configuration
-\begin_inset LatexCommand label
-name "sec:optkey"
-
-\end_inset
-
-
\end_layout
\begin_layout Standard
-The preferences dialog allows you to choose up to two keyboard mappings.
- This allows you to choose the keymap of your choice for your U.S.-style keyboard.
+If you have for example a U.S.-style keyboard and want to write in a different
+ language than English, you can use an alternate keymap.
+ For example, if you have a U.S.-style keyboard but want to write in Italian,
+ you can configure LyX to use an Italian keymap.
+ The preferences dialog allows you to choose up to two keyboard mappings.
You can choose primary and secondary keyboard languages and then select
which one you want to use.
\end_layout
+\begin_layout Standard
+Finally, you may just want to change a few key mappings or create an entirely
+ different keymap (for Vulcan, for instance).
+ You may, for example, normally write in Italian on a U.S.
+ keyboard but want to include an occasional quotation in German.
+ In such a case, you can write your own keyboard mapping or modify an existing
+ one to support the characters you want.
+ This and much more costomizations are explained in the
+\emph on
+Customization
+\emph default
+ manual.
+\end_layout
+
\begin_layout Subsection
Character Tables
\begin_inset LatexCommand label
\begin_layout Standard
There are a few things you need to know about this table.
- This manual is set up --- by hand, mind you --- to print all of these character
-s.
- That ain't the default.
- Nowhere near, in fact.
Here are some of the details you'll need to bear in mind when using characters
from the
\family typewriter
\end_layout
\begin_layout Itemize
-The characters at entries A2, A4, A5, A6 and AD -- the cent, the yen, the
- generic-currency-symbol, the broken vertical bar and the short dash are
- just plain missing in the default encodings.
- We don't know where they are or why this is the case.
-\end_layout
-
-\begin_layout Itemize
-Even if you've selected
+Even if you have selected
\family sans
latin1
\family default
french quotes won't show up.
\end_layout
-\begin_layout Itemize
-Users of
-\family typewriter
-Type1
-\family default
--fonts can, however, get the french quotes [characters AB and BB] if they
- include the either the package
-\family typewriter
-umlaute.sty
-\family default
- or
-\family typewriter
-german.sty
-\family default
- in their documents.
-\begin_inset Foot
-status collapsed
+\begin_layout Standard
+\begin_inset Float table
+wide false
+sideways false
+status open
\begin_layout Standard
-This only holds when you want to input these quotes by yourself.
- The automatic quote feature described in Section
-\begin_inset LatexCommand ref
-reference "sec:quotes"
+\begin_inset Caption
+
+\begin_layout Standard
+\begin_inset LatexCommand label
+name "cap:The-latin1-character"
\end_inset
-, will generate automatically LaTeX code adapted to available fonts and
- packages.
+The
+\family typewriter
+latin1
+\family default
+ character set
\end_layout
\end_inset
-\begin_inset Note Note
-status collapsed
-
-\begin_layout Standard
-The characters of the following table, which are inserted as commands, could
- not be inserted directly with the keyboard, because the standard encoding
-
-\begin_inset Quotes eld
-\end_inset
-
-T1
-\begin_inset Quotes erd
-\end_inset
-
- doesn't know them.
- To let LaTeX understand the commands, the package
-\series bold
-textcomp
-\series default
- needs to be loaded in the preamble with the line
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-usepackage{textcomp}
-\end_layout
-
-\begin_layout Standard
-The package
-\series bold
-textcomp
-\series default
- is available on every LaTeX system.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-\begin_inset Float table
-wide false
-sideways false
-status collapsed
-
-\begin_layout Standard
-\begin_inset Caption
-
-\begin_layout Standard
-\begin_inset LatexCommand label
-name "cap:The-latin1-character"
-
-\end_inset
-
-The
-\family typewriter
-latin1
-\family default
- character set
-\end_layout
-
-\end_inset
-
-
-\end_layout
+\end_layout
\begin_layout Standard
\align center
\begin_inset Text
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Standard
-
-
-\backslash
-textcent
-\end_layout
-
-\end_inset
-
-
-\begin_inset Note Note
-status collapsed
-
-\begin_layout Standard
-character ¢
-\end_layout
-
-\end_inset
-
-
+¢
\end_layout
\end_inset
\begin_inset Text
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Standard
-
-
-\backslash
-textcurrency
-\end_layout
-
-\end_inset
-
-
-\begin_inset Note Note
-status collapsed
-
-\begin_layout Standard
-character ¤
-\end_layout
-
-\end_inset
-
-
+¤
\end_layout
\end_inset
\begin_inset Text
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Standard
-
-
-\backslash
-textyen
-\end_layout
-
-\end_inset
-
-
-\begin_inset Note Note
-status collapsed
-
-\begin_layout Standard
-character ¥
-\end_layout
-
-\end_inset
-
-
+¥
\end_layout
\end_inset
\begin_inset Text
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Standard
-
-
-\backslash
-textbrokenbar
-\end_layout
-
-\end_inset
-
-
-\begin_inset Note Note
-status collapsed
-
-\begin_layout Standard
-character ¦
-\end_layout
-
-\end_inset
-
-
+¦
\end_layout
\end_inset
\begin_inset Text
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Standard
-
-
-\backslash
-textendash
-\end_layout
-
-\end_inset
-
-
-\begin_inset Note Note
-status collapsed
-
-\begin_layout Standard
-character
-\end_layout
-
-\end_inset
-
-
+–
\end_layout
\end_inset
\end_deeper
\begin_layout Standard
All the characters above are actively supported by TeX fonts.
- In addition TeX allows diacritical marks on almost all characters .
+ In addition TeX allows diacritical marks on almost all characters.
Also make sure you're using the
\family typewriter
T1
\family default
- font-encoding and have the package
-\family typewriter
-umlaute.sty
-\family default
- with the definition file
-\family typewriter
-iso.def
-\family default
- installed.
-\end_layout
-
-\begin_layout Standard
-Introduction
-\end_layout
-
-\begin_layout Standard
-This manual covers the customization features present in LyX.
- In it, we discuss issues like keyboard shortcuts, screen previewing options,
- printer options, sending commands to LyX via the LyX Server, internationalizati
-on, installing new LaTeX classes and LyX layouts, etc.
- We can't possibly hope to touch on everything you can change---our developers
- add new features faster than we can document them---but we will explain
- the most common customizations and hopefully point you in the right direction
- for some of the more obscure ones.
-\end_layout
-
-\begin_layout Standard
-
+ font-encoding.
\end_layout
\begin_layout Standard
At the end of the menu the four last opened documents are listed.
\end_layout
+\begin_layout Subsection
+New
+\end_layout
+
+\begin_layout Standard
+Creates a new document.
+\end_layout
+
\begin_layout Subsection
New from Template
\end_layout
\end_layout
\begin_layout Subsection
-Revert
+Open
\end_layout
\begin_layout Standard
-The
-\family sans
-Revert
-\family default
- menu will reload the document from disk.
- You can also use it if you regret a change in the document and want to
- restore it to the last saved version.
+Opens a document.
+\end_layout
+
+\begin_layout Subsection
+Open Recent
+\end_layout
+
+\begin_layout Standard
+The submenu shows a list of the recently opened files.
+ Click there on a file to open it.
+\end_layout
+
+\begin_layout Subsection
+Close
+\end_layout
+
+\begin_layout Standard
+Closes the current document.
+\end_layout
+
+\begin_layout Subsection
+Save
+\end_layout
+
+\begin_layout Standard
+Saves the actual document.
+\end_layout
+
+\begin_layout Subsection
+Save As
+\end_layout
+
+\begin_layout Standard
+Saves the actual document under a new name to create a copy.
+\end_layout
+
+\begin_layout Subsection
+Revert to Save
+\end_layout
+
+\begin_layout Standard
+Reloads the actual document from disk.
\end_layout
\begin_layout Subsection
\end_layout
\begin_layout Standard
-You can import text from an ASCII file using the menu
-\family sans
-ASCII\InsetSpace ~
-text\InsetSpace ~
-as\InsetSpace ~
-lines
-\family default
-.
- That means that each line of the file is imported as its own LyX paragraph.
- This is useful if you're importing a text file with a simple list in it.
- However, if your text file contains paragraphs, LyX will mangle the paragraphs
- if you use this form of import.
+You can import there files from older LyX-versions, LaTeX-files and plain
+ text files (ASCII-files).
+ The files will be imported as new LyX-document.
\end_layout
\begin_layout Standard
-The menu
+When using the menu
\family sans
-ASCII\InsetSpace ~
-text\InsetSpace ~
-as\InsetSpace ~
-paragraphs
+Plain\InsetSpace ~
+Text, Join\InsetSpace ~
+Lines
\family default
- preserves paragraphs in text files.
- LyX won't mangle paragraphs - anything between two consecutive blank lines
- goes into its own LyX paragraph.
- The blank line mustn't contain spaces.
+, all lines will be imported consecutively to one big paragraph.
+ A new paragraph is started when there is a blank line in the file.
+ , the text is inserted as Paragraphs, where the line breaks of the text
+ will start a new paragraph.
\end_layout
\begin_layout Subsection
\end_layout
\begin_layout Standard
-It follows a list of all available entries, they are explained in detail
- in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+Here is a list of all available entries; they are explained in detail in
+ section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Output-file-formats"
\end_inset
-.
+:
\end_layout
\begin_layout Description
\family sans
-ASCII
+CJK\InsetSpace ~
+LyX
\family default
- text format
+format of the special LyX 1.4.x versions for Chinese, Japanese, and Korean
+ (CJK); (Since LyX 1.5.0 CJK support is fully integrated to LyX.)
\end_layout
\begin_layout Description
\family sans
DVI
\family default
- dvi-format
+ DVI-format
+\end_layout
+
+\begin_layout Description
+HTML HTML-format (the HTML-converter is a third-party product and doesn't
+ work in all cases)
+\end_layout
+
+\begin_layout Description
+HTML\InsetSpace ~
+(MS\InsetSpace ~
+Word) ??
\end_layout
\begin_layout Description
\end_inset
-eX
+eX\InsetSpace ~
+(pdflatex)
+\family default
+ text file with the LaTeX source, addtionally all images used in the document
+ will be converted to a format that is readable for the
+\family typewriter
+pdflatex
\family default
- text file of LaTeX source code
+ program (GIF, JPG, PDF, PNG)
\end_layout
\begin_layout Description
\family sans
-PDF
-\family default
- pdf-format using the program
-\family typewriter
-ps2pdf
-\end_layout
+LaT
+\begin_inset ERT
+status collapsed
-\begin_layout Description
+\begin_layout Standard
+
+{}
+\end_layout
+
+\end_inset
+
+eX\InsetSpace ~
+(plain)
+\family default
+ text file with the LaTeX source code, addtionally all images used in the
+ document will be converted to the EPS-format, only this format is readable
+ for the
+\family typewriter
+latex
+\family default
+ program
+\end_layout
+
+\begin_layout Description
+LyX\InsetSpace ~
+1.y.x LyX-document in a format readable for the LyX versions 1.y.x (
+\begin_inset Quotes eld
+\end_inset
+
+y
+\begin_inset Quotes erd
+\end_inset
+
+ is replaced by the version number)
+\end_layout
+
+\begin_layout Description
+OpenDocument OpenDocument-formatted text file, to be opened with OpneOffice,
+ KOffice, Abiword, etc.
+ (the OpenDocument-converter is a third-party product and doesn't work in
+ all cases)
+\end_layout
+
+\begin_layout Description
+
+\family sans
+PDF
+\family default
+ PDF-format using the program
+\family typewriter
+ps2pdf
+\end_layout
+
+\begin_layout Description
\family sans
PDF\InsetSpace ~
(dvipdfm)
\family default
- pdf-format using the program
+ PDF-format using the program
\family typewriter
dvipdfm
\end_layout
PDF\InsetSpace ~
(pdflatex)
\family default
- pdf-format using the program
+ PDF-format using the program
\family typewriter
pdflatex
\end_layout
\begin_layout Description
+\family sans
+Plain\InsetSpace ~
+text
+\family default
+ text format
+\end_layout
+
+\begin_layout Description
+
+\family sans
+Plain\InsetSpace ~
+text\InsetSpace ~
+(ps2ascii)
+\family default
+ ??
+\end_layout
+
+\begin_layout Description
+
\family sans
Postscript
\family default
\family sans
Custom
\family default
- one of the formats above
+ custom format
\end_layout
\begin_layout Standard
pdflatex
\family default
produces directly pdf-files and supports the latest pdf-file formats.
- Its use is recommended.
\end_layout
\begin_layout Standard
Postscript
\family default
is missing, you need to update your LaTeX installation.
- After updating you have to reconfigure LyX, see sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ After updating you have to reconfigure LyX, see section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Basic-LyX-Setup"
dvips
\family default
.
- For more informations have a look at sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ For more informations have a look at section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Printing-the-File"
\end_layout
\begin_layout Standard
-LyX has a large-capacity undo/redo buffer.
- Select
-\family sans
-Edit\SpecialChar \menuseparator
-Undo
-\family default
- to undo some mistake.
- If you accidently undo too much, use
-\family sans
-Edit\SpecialChar \menuseparator
-Redo
-\family default
- to
-\begin_inset Quotes eld
-\end_inset
+Described in section\InsetSpace ~
+
+\begin_inset LatexCommand ref
+reference "sec:Undo-and-Redo"
-undo the undo.
-\begin_inset Quotes erd
\end_inset
- The undo mechanism is currently limited to 100 steps to minimise memory
- overhead.
-
+.
+\end_layout
+
+\begin_layout Subsection
+Cut, Copy, Paste, Paste Recent, Paste Special
\end_layout
\begin_layout Standard
-Notice that if you revert back all changes to arrive to the document as
- it was last saved, the
-\begin_inset Quotes eld
-\end_inset
+Described in section\InsetSpace ~
+
+\begin_inset LatexCommand ref
+reference "sec:Basic-Editing-Features"
-changed
-\begin_inset Quotes erd
\end_inset
- status of the document is unfortunately not reset.
- This is a consequence of the 100 step undo limit, above.
+.
+\end_layout
+
+\begin_layout Subsection
+Select All
\end_layout
\begin_layout Standard
-The
-\family sans
-Undo
-\family default
- and
-\family sans
-Redo
-\family default
- work on almost everything in LyX.
- But they won't undo or redo text changes character by character, only by
- blocks of text.
+Selects the whole document.
\end_layout
\begin_layout Subsection
-Cut, Copy and Paste
+Find & Replace
\end_layout
\begin_layout Standard
-Whenever you delete a block of text that you've selected, it's automatically
- placed in the clipboard, so that the
-\family sans
-Delete
-\family default
- and
-\family sans
-Backspace
-\family default
- keys also function as the
-\family sans
-Cut
-\family default
- command.
- If you've selected text and hit a key, LyX will replace the selected text
- by the character of the pressed key.
- You'll have to do an
-\family sans
-Undo
-\family default
- to get back the lost text.
+Described in section\InsetSpace ~
+
+\begin_inset LatexCommand ref
+reference "sec:Basic-Editing-Features"
+
+\end_inset
+
+.
\end_layout
-\begin_layout Standard
-To select text hold down the left mouse button and drag the mouse.
- LyX marks the text between the old and new mouse positions.
- Use the menu
-\family sans
-Edit\SpecialChar \menuseparator
-Copy
-\family default
- to create a copy of the text in the clipboard.
- To paste text, use the middle mouse button (eventual click on the mouse
- wheel).
+\begin_layout Subsection
+Move paragraph Up/Down
\end_layout
\begin_layout Standard
-You can also copy text between LyX and other programs by cut, copy and paste.
+This shifts the paragraph where the cursor is currently in one paragraph
+ up or down.
+\end_layout
+
+\begin_layout Subsection
+Text Style
\end_layout
\begin_layout Standard
-The menu
-\family sans
-Paste\InsetSpace ~
-External\InsetSpace ~
-Selection
-\family default
- will insert the text in the clipboard
-\family sans
-as
-\family default
-
-\family sans
-Lines
-\family default
-, that means the whole text is inserted as
-\emph on
-one
-\emph default
- paragraph or
-\family sans
-as
-\family default
-
-\family sans
-Paragraphs
-\family default
-, where the line breaks of the text will start a new paragraph.
+Described in section\InsetSpace ~
+
+\begin_inset LatexCommand ref
+reference "sub:Fine-Tuning-with-the"
+
+\end_inset
+
+.
\end_layout
\begin_layout Subsection
-Find/Replace
+Paragraph Settings
\end_layout
\begin_layout Standard
-The
-\family sans
-Edit\SpecialChar \menuseparator
-Find\InsetSpace ~
-&\InsetSpace ~
-Replace
-\family default
- item opens the
-\family sans
-Find\InsetSpace ~
-&\InsetSpace ~
-Replace
-\family default
- dialog.
- The text you want to find goes in the
-\family sans
-Find
-\family default
- box.
- Once you've found a word or expression, LyX selects it.
- Hitting the
-\family sans
-Replace
-\family default
- button replaces the selected text with the contents of the
-\family sans
-Replace\InsetSpace ~
-with
-\family default
- box.
- You can click to search again to skip the current word.
- Hit
+The settings in the paragraph dialog only affects the paragraph where the
+ cursor is in.
+ Here you can set here the paragraph alignment and line spacing.
+\end_layout
+
+\begin_layout Standard
+You can also prevent that the first line of the paragraph is indented.
+ This option works only when you have chosen to separate paragraphs with
+ indents in the
\family sans
-Replace All
+Document\SpecialChar \menuseparator
+Settings
\family default
- to replace all occurrences of the text in the document automatically.
- The
+ dialog under
\family sans
-Case\InsetSpace ~
-sensitive
+Text\InsetSpace ~
+Layout
\family default
- toggle button can be used if you want the search to consider the case of
- the search word.
- If the toggle is set, searching for
-\begin_inset Quotes eld
-\end_inset
+.
+\end_layout
+\begin_layout Standard
-\family typewriter
-Match
-\family default
+\end_layout
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Subsection
+Tabular and Math
+\end_layout
+
+\begin_layout Standard
+These two menus are only active when the cursor is inside a table or a formula.
+ The properties of this table/formula can now be changed.
+ The properties of tables are described in section\InsetSpace ~
+
+\begin_inset LatexCommand ref
+reference "sec:tables"
- will not match the word
-\begin_inset Quotes eld
\end_inset
+, the properties of formulas in chapter\InsetSpace ~
-\family typewriter
-match
-\family default
+\begin_inset LatexCommand ref
+reference "cha:Mathematical-Formulas"
-\begin_inset Quotes erd
\end_inset
.
- The
-\family sans
-Match\InsetSpace ~
-Word
-\family default
- toggle button can be used to force LyX to only find complete words.
- I.e.
- searching for
-\begin_inset Quotes eld
-\end_inset
+\end_layout
+\begin_layout Subsection
+Increase / Decrease List Depth
+\end_layout
-\family typewriter
-match
-\family default
+\begin_layout Standard
+These menus are only active whe the cursor is in an environment that can
+ be nested.
+ They in/decrease the environment nesting level as explained in section\InsetSpace ~
-\begin_inset Quotes erd
-\end_inset
+\begin_inset LatexCommand ref
+reference "sec:nest"
- will not match
-\begin_inset Quotes eld
\end_inset
+ and
+\begin_inset LatexCommand ref
+reference "sub:numbering-depth"
-\family typewriter
-matches
-\family default
-
-\begin_inset Quotes erd
\end_inset
-,
-\begin_inset Quotes eld
-\end_inset
+.
+\end_layout
+\begin_layout Section
+The View Menu
+\end_layout
-\family typewriter
-matchbox
+\begin_layout Standard
+When you have more than one document opened, the bottom of the
+\family sans
+View
\family default
+ menu lists the opened documents.
+\end_layout
-\begin_inset Quotes erd
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
-, etc.
-\end_layout
-\begin_layout Subsection
-Tabular and Math
\end_layout
\begin_layout Standard
-These menus are only active when the cursor is inside a table or a formula.
- The properties of this table/formula can now be changed.
- The properties of tables are described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+The
+\family sans
+View
+\family default
+ menu contains a list of available formats in which you can view the actual
+ document with an external program.
+ The menu entries for the viewing formats are not the same on all installations
+ - it depends on the LaTeX programs that are found while LyX was configured.
+ All possible formats are formats listed in section\InsetSpace ~
\begin_inset LatexCommand ref
-reference "sec:tables"
-
-\end_inset
+reference "sub:Export"
-, the properties of formulas in chap.
-\begin_inset Formula $\,$
\end_inset
+.
+ You should at least see the menu entries
+\family sans
+DVI
+\family default
+ and
+\family sans
+PDF\InsetSpace ~
+(pdflatex)
+\family default
+.
+ If one of the two is missing, you need to update your LaTeX installation.
+ After updating you have to reconfigure LyX, see section\InsetSpace ~
\begin_inset LatexCommand ref
-reference "cha:Mathematical-Formulas"
+reference "sec:Basic-LyX-Setup"
\end_inset
.
+
\end_layout
-\begin_layout Subsection
-Spell Checking
-\begin_inset LatexCommand label
-name "sec:Spell Checking"
+\begin_layout Standard
+Invoking a menu will start a viewer program.
+ The viewer can be set in the preferences, see section\InsetSpace ~
-\end_inset
+\begin_inset LatexCommand ref
+reference "sec:Preferences"
+\end_inset
+.
+ The default viewers are set by LyX while it is first configured or later
+ reconfigured.
\end_layout
-\begin_layout Standard
-LyX itself has no built-in spell checker.
- Rather it uses one of the external programs
-\family typewriter
-aspell
-\family default
-,
-\family typewriter
-ispell
-\family default
- or
-\family typewriter
-hspell
-\family default
- as backend.
- This section assumes you have already installed and set up one of these
- programs.
-
-\family typewriter
-aspell
-\family default
- can be seen as successor of
-\family typewriter
-ispell
-\family default
-, so that it is recommended to use aspell.
-
-\family sans
-hspell
-\family default
- is an Hebrew spell-checker.
- The used spell checker is set in the preferences, see
-\begin_inset Note Note
-status collapsed
+\begin_layout Subsection
+View Source
+\end_layout
\begin_layout Standard
+Opens a window showing the source code of the actual document, as described
+ in section\InsetSpace ~
-\end_layout
+\begin_inset LatexCommand ref
+reference "sec:Previewing-snippets-of"
\end_inset
.
\end_layout
-\begin_layout Standard
-Spell checking will start just after the current cursor position.
- A dialog window will appear showing any incorrect (or unknown) word found,
- allowing you to edit and replace it in a second line.
- Whenever an unknown word is found, the word is highlighted and the view
- in your text buffer is updated to make the word visible.
- In the
-\family sans
-spell checker
-\family default
- dialog, there is also a box showing suggestions for a correction, if any
- could be found.
- Clicking on one of the corrections will copy the near miss into the replace
- input field (double-click to invoke replace).
- Unknown but correctly typed words can be added to the personal dictionary.
+\begin_layout Subsection
+Update
\end_layout
\begin_layout Standard
-By default, the dictionary file to use is determined by the language of
- the text you're checking, which is set in the
-\family sans
-Layout
-\family default
-\SpecialChar \menuseparator
-
-\family sans
-Document
-\family default
- dialog.
- If you do not have a dictionary for the document language, the spell checker
- will not work.
- In this case, you can specify another dictionary file in the dialog by
- specifying a different
-\begin_inset Quotes eld
-\end_inset
-
-alternative language
-\begin_inset Quotes erd
-\end_inset
+This menu allows you to update the view with your latest changes without
+ opening a new view window.
+\end_layout
-.
+\begin_layout Subsection
+Table of Contents
\end_layout
\begin_layout Standard
-After a spell check you'll informed about the number of checked words.
- (This at the moment the only possibility for a word count of a document.)
+This menu opens the same window that appears when clicking on the grey table
+ of contents box.
+ Within this window you can navigate through the document similar to the
+ navigate menu.
+ You can open/close section levels by using the slide control at the bottom
+ of the dialog.
\end_layout
-\begin_layout Subsubsection*
-Limitations
+\begin_layout Subsection
+Toolbars
\end_layout
\begin_layout Standard
-It is not possible to change the spelling of a particular word globally,
- rather than having to change the spelling separately for each occurrence
- of the word.
- But you can use the
-\family sans
-Find\InsetSpace ~
-&\InsetSpace ~
-Replace
-\family default
- menu for that.
+??
\end_layout
-\begin_layout Standard
-LyX cannot correctly spell check documents containing multiple languages.
- This does work with
-\family typewriter
-pspell
-\family default
-, assuming you have marked the different languages appropriately.
+\begin_layout Section
+The Navigate Menu
\end_layout
-\begin_layout Subsubsection*
-Personal dictionary
+\begin_layout Standard
+This menu lists the existing, chapter, sections, figures, and tables of
+ the current document.
+ This allows you to navigate easily through you document.
\end_layout
\begin_layout Standard
-If you want to use a different file from the spell checker's default choice
- as your personal dictionary, you can set this in the dialog.
- Specifying a filename which does not already exist will result in an error
- message on stderr which you can ignore (
-\family typewriter
-ispell
-\family default
- will create the file at the end of your spell checking).
+The Navigate menu also offers to
\end_layout
-\begin_layout Subsubsection*
-Further Options
+\begin_layout Subsection
+Bookmarks ??
\end_layout
\begin_layout Standard
-The
+With this menu you are able to define your own bookmarks.
+ This is useful when you're working on a large documents and often have
+ to jump e.g.
+ between section\InsetSpace ~
+2.6 and 6.3.
+ To create bookmarks for this example, go to section\InsetSpace ~
+2.6 and use the menu
+
\family sans
-Spellchecker
+Save\InsetSpace ~
+Bookmark\InsetSpace ~
+1
\family default
- menu has some additional options which are self-explanatory:
-\end_layout
-
-\begin_layout Itemize
+.
+ Then go to section\InsetSpace ~
+6.3 and use
+\family sans
+Save\InsetSpace ~
+Bookmark\InsetSpace ~
+\family default
+2.
+ Now you can easily jump between these sections by using the menu or by
+ the key bindings
\family sans
-\bar under
-A
-\bar default
-ccept compound words
+C-1
\family default
-
-\newline
-Prevent the spell checker from complaining about compounded words like
-\newline
-
-\begin_inset Quotes eld
-\end_inset
-
-passthrough
-\begin_inset Quotes erd
-\end_inset
-
-.
-\end_layout
-
-\begin_layout Itemize
-
+ and
\family sans
-\bar under
-E
-\bar default
-scape characters
+C-2
\family default
-
-\newline
-Allows you to add nonstandard characters to what the spell checker considers
- words, e.g.
- German umlauts.
- This should not normally be needed.
+.
\end_layout
-\begin_layout Subsection
-Check T
-\begin_inset ERT
-status collapsed
-
\begin_layout Standard
-
-{}
-\end_layout
-
-\end_inset
-
-eX
+You can also use bookmarks to jump between several opened documents.
+ The saved bookmarks are valid till the document is closed.
\end_layout
\begin_layout Standard
-\begin_inset Note Note
-status collapsed
+If you wish to have more than three available bookmarks, look at section\InsetSpace ~
-\begin_layout Standard
-no idea
-\end_layout
+\begin_inset LatexCommand ref
+reference "sec:ui"
\end_inset
-
+ for a detailed description.
\end_layout
\begin_layout Subsection
-Preferences
+Next Note, Change, Cross-reference
\end_layout
\begin_layout Standard
-The preferences dialog is described in detail in chapter
-\begin_inset Formula $\,$
-\end_inset
-
-
-\begin_inset LatexCommand ref
-reference "cha:The-Preferences-dialog"
-
-\end_inset
+Jump to the next note, change, or cross-reference following the current
+ cursor position.
+\end_layout
-.
+\begin_layout Section
+The Document Menu
\end_layout
\begin_layout Subsection
-Reconfigure
+Change Tracking
\end_layout
\begin_layout Standard
-This menu reconfigures LyX.
- That means LyX looks for LaTeX-packages and needed programs, see also sec.
-\begin_inset Formula $\,$
-\end_inset
-
-
-\begin_inset LatexCommand ref
-reference "sec:Basic-LyX-Setup"
-
-\end_inset
-
-.
+Not yet described in one of the manuals! (??)
\end_layout
-\begin_layout Section
-The Insert Menu
-\end_layout
+\begin_layout Subsection
+LaT
+\begin_inset ERT
+status collapsed
-\begin_layout Section
-The Layout Menu
-\end_layout
+\begin_layout Standard
-\begin_layout Subsection
-Character Settings
+{}
\end_layout
-\begin_layout Subsection
-Paragraph Settings
-\end_layout
+\end_inset
-\begin_layout Standard
-The settings in the paragraph dialog affects only the paragraph where the
- cursor is in.
- The dialog consists of the following three tabs:
+eX Log
\end_layout
-\begin_layout Subsubsection*
-General
+\begin_layout Standard
+After running LaTeX by viewing or exporting a document, this menu will be
+ enabled.
+ It shows the logfile of the used LaTeX-program.
\end_layout
\begin_layout Standard
-Here you can set the paragraph alignment and line spacing.
- You can also prevent that the first line of the paragraph is indented.
- This option works only when you have chosen indent separation of paragraphs
- in the
-\family sans
-Layout\SpecialChar \menuseparator
-Document
-\family default
- dialog under
-\family sans
-Layout
-\family default
-.
+Here you can see how LaTeX works in the background.
+
+\emph on
+Experts
+\emph default
+ will find in it reasons for LaTeX-errors.
\end_layout
-\begin_layout Subsubsection*
-Spacing
+\begin_layout Subsection
+Outline
\end_layout
\begin_layout Standard
-You can set different spaces above and below paragraphs.
- There are three predefined skips with a size relative to the font size.
- The space VFill is a so called rubber length, described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+Opens the TOC/Outline window as described in section\InsetSpace ~
\begin_inset LatexCommand ref
-reference "sec:vertspace"
+reference "sub:Table-of-Contents"
\end_inset
.
\end_layout
-\begin_layout Subsubsection*
-Lines & Pagebreaks
+\begin_layout Subsection
+Start Appendix Here
\end_layout
\begin_layout Standard
-Pagebreaks can also be forced in this dialog tab.
- They are described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
-
-\begin_inset LatexCommand ref
-reference "sec:pagebreak"
-
-\end_inset
-
-.
- You can also put lines around a paragraph as explained in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+This menu will start the appendix of the document at the current cursor
+ position.
+ The appendix is visually emphasized in LyX as box with a red border.
+\end_layout
-\begin_inset LatexCommand ref
-reference "sub:Lines-around-Paragraphs"
+\begin_layout Standard
+The appendix is the last part of a document.
+ Within it, you can use all paragraph types with the only difference that
+ sections will be numbered with latin letters to show the difference.
+\end_layout
-\end_inset
+\begin_layout Subsection
+Compressed
+\end_layout
-.
+\begin_layout Standard
+Un/compresses the actual document.
\end_layout
\begin_layout Subsection
-Document Settings
+Settings
\end_layout
\begin_layout Standard
\begin_layout Standard
Here are set the document class, class options, fonts and other layout issues.
- Document classes are described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ Document classes are described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:doc-classes"
\end_inset
-, font in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+, font in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Fonts-and-Text"
\end_inset
.
- The float placement options are described in sec.
+ The float placement options are described in section
\begin_inset Formula $\,$
\end_inset
\end_layout
\begin_layout Standard
-A detailed description of this menu is given in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+A detailed description of this menu is given in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Paper-Size,-Orientation,"
\end_layout
\begin_layout Standard
-Here you can adjust the paper margins, see sec.
-\begin_inset Formula $\,$
-\end_inset
-
+Here you can adjust the paper margins, see section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Margins"
\begin_layout Standard
Here you can adjust the characters for the itemize levels.
- The itemize environment is described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ The itemize environment is described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:itemize"
\begin_layout Standard
You can adjust here the numbering depth of sections headings as described
- in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:numbering-depth"
\family default
installed.
If you use NatBib, you can choose between two citation styles.
- For a further description see sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ For a further description see section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Bibliography"
manual.
\end_layout
-\begin_layout Subsection
-Environment Depth
+\begin_layout Section
+The Tools Menu
\end_layout
-\begin_layout Standard
-These menus in/decrease the environment nesting level as explained in sec.
-\begin_inset Formula $\,$
-\end_inset
-
-
-\begin_inset LatexCommand ref
-reference "sec:nest"
-
-\end_inset
-
- and
-\begin_inset LatexCommand ref
-reference "sub:numbering-depth"
+\begin_layout Subsection
+Spellchecker
+\begin_inset LatexCommand label
+name "sec:Spellchecking"
\end_inset
- et sqq.
-\end_layout
-\begin_layout Subsection
-Appendix
\end_layout
\begin_layout Standard
-Using this menu will start the appendix of the document at the current cursor
- position.
- The appendix is visually emphasized in LyX as box with a red border.
-\end_layout
+LyX itself has no built-in spell checker.
+ Rather it uses one of the external programs
+\family typewriter
+aspell
+\family default
+,
+\family typewriter
+ispell
+\family default
+ or
+\family typewriter
+hspell
+\family default
+ as backend.
+ This section assumes you have already installed and set up one of these
+ programs.
+
+\family typewriter
+aspell
+\family default
+ can be seen as successor of
+\family typewriter
+ispell
+\family default
+, so that it is recommended to use aspell.
+
+\family sans
+hspell
+\family default
+ is an Hebrew spell-checker.
+ The used spell checker is set in the preferences, see
+\begin_inset Note Note
+status collapsed
\begin_layout Standard
-The appendix is the last part of a document.
- Within it, you can use all paragraph types but sections will be numbered
- with latin letters to show the difference.
-\end_layout
-\begin_layout Section
-The View Menu
\end_layout
-\begin_layout Standard
-To preview the document with an external program, use this menu.
- It offers the preview in
-\emph on
-dvi
-\emph default
- and
-\emph on
-pdf
-\emph default
- format.
- The menu entries for previewing are not the same on all installations -
- it depends on the LaTeX programs that are found while LyX was configured.
-\end_layout
+\end_inset
-\begin_layout Standard
-It follows a list of all available entries:
+.
\end_layout
-\begin_layout Description
-
+\begin_layout Standard
+Spell checking will start just after the current cursor position.
+ A dialog window will appear showing any incorrect (or unknown) word found,
+ allowing you to edit and replace it in a second line.
+ Whenever an unknown word is found, the word is highlighted and the view
+ in your text buffer is updated to make the word visible.
+ In the
\family sans
-DVI
+spell checker
\family default
- dvi-format
+ dialog, there is also a box showing suggestions for a correction, if any
+ could be found.
+ Clicking on one of the corrections will copy the near miss into the replace
+ input field (double-click to invoke replace).
+ Unknown but correctly typed words can be added to the personal dictionary.
\end_layout
-\begin_layout Description
-
+\begin_layout Standard
+By default, the dictionary file to use is determined by the language of
+ the text you're checking, which is set in the
\family sans
-PDF\InsetSpace ~
-(dvipdfm)
+Layout
\family default
- pdf-format using the program
-\family typewriter
-dvipdfm
-\end_layout
-
-\begin_layout Description
-
+\SpecialChar \menuseparator
+
\family sans
-PDF\InsetSpace ~
-(pdflatex)
+Document
\family default
- pdf-format using the program
-\family typewriter
-pdflatex
-\end_layout
-
-\begin_layout Standard
-The differences of the formats are explained in sec.
-\begin_inset Formula $\,$
+ dialog.
+ If you do not have a dictionary for the document language, the spell checker
+ will not work.
+ In this case, you can specify another dictionary file in the dialog by
+ specifying a different
+\begin_inset Quotes eld
\end_inset
-
-\begin_inset LatexCommand ref
-reference "sub:Export"
-
+alternative language
+\begin_inset Quotes erd
\end_inset
.
\end_layout
\begin_layout Standard
-You should at least see the menu entries
-\family sans
-DVI
-\family default
- and
-\family sans
-PDF\InsetSpace ~
-(pdflatex)
-\family default
-.
- If on of the two is missing you need to update your LaTeX installation.
- After updating you have to reconfigure LyX, see sec.
-\begin_inset Formula $\,$
-\end_inset
-
-
-\begin_inset LatexCommand ref
-reference "sec:Basic-LyX-Setup"
-
-\end_inset
+After a spell check you'll informed about the number of checked words.
+ (This at the moment the only possibility for a word count of a document.)
+\end_layout
-.
+\begin_layout Subsubsection*
+Limitations
\end_layout
\begin_layout Standard
-Invoking a menu will start a viewer program.
- The viewer can be set in the preferences, see sec.
-\begin_inset Formula $\,$
-\end_inset
+It is not possible to change the spelling of a particular word globally,
+ rather than having to change the spelling separately for each occurrence
+ of the word.
+ But you can use the
+\family sans
+Find\InsetSpace ~
+&\InsetSpace ~
+Replace
+\family default
+ menu for that.
+\end_layout
+\begin_layout Standard
+LyX cannot correctly spell check documents containing multiple languages.
+ This does work with
+\family typewriter
+pspell
+\family default
+, assuming you have marked the different languages appropriately.
+\end_layout
-\begin_inset LatexCommand ref
-reference "sec:Preferences"
+\begin_layout Subsubsection*
+Personal dictionary
+\end_layout
-\end_inset
+\begin_layout Standard
+If you want to use a different file from the spell checker's default choice
+ as your personal dictionary, you can set this in the dialog.
+ Specifying a filename which does not already exist will result in an error
+ message on stderr which you can ignore (
+\family typewriter
+ispell
+\family default
+ will create the file at the end of your spell checking).
+\end_layout
-.
- The default viewers are set by LyX while it's configuration.
+\begin_layout Subsubsection*
+Further Options
\end_layout
-\begin_layout Subsection
-Update
+\begin_layout Standard
+The
+\family sans
+Spellchecker
+\family default
+ menu has some additional options which are self-explanatory:
\end_layout
-\begin_layout Standard
-This menu allows you to update the preview with your latest changes without
- opening a new preview file.
-\end_layout
+\begin_layout Itemize
+
+\family sans
+\bar under
+A
+\bar default
+ccept compound words
+\family default
+
+\newline
+Prevent the spell checker from complaining about compounded words like
+\newline
-\begin_layout Subsection
-LaT
-\begin_inset ERT
-status collapsed
+\begin_inset Quotes eld
+\end_inset
-\begin_layout Standard
+passthrough
+\begin_inset Quotes erd
+\end_inset
-{}
+.
\end_layout
-\end_inset
+\begin_layout Itemize
-eX Logfile
-\end_layout
+\family sans
+\bar under
+E
+\bar default
+scape characters
+\family default
-\begin_layout Standard
-After opening a preview file or after exporting the document, this menu
- will be enabled.
- It shows the logfile of the used LaTeX-program.
+\newline
+Allows you to add nonstandard characters to what the spell checker considers
+ words, e.g.
+ German umlauts.
+ This should not normally be needed.
\end_layout
-\begin_layout Standard
-Here you can see how LaTeX works in the background.
-
-\emph on
-Experts
-\emph default
- will find in it reasons for LaTeX-errors.
+\begin_layout Subsection
+Thesaurus
\end_layout
\begin_layout Subsection
-Table of Contents
+Word Count
\end_layout
\begin_layout Standard
-This menu opens the same window that appears when clicking on the grey table
- of contents box.
- Within this window you can navigate through the document similar to the
- navigate menu.
- You can open/close section levels by using the slide control at the bottom
- of the dialog.
+Counts the number of words in the actual document.
\end_layout
\begin_layout Subsection
Shows you a list of the classes and styles installed in your LaTeX-system.
\end_layout
-\begin_layout Section
-The Navigate Menu
-\end_layout
-
-\begin_layout Standard
-This menu lists the existing list of figures, list of tables and the table
- of contents (TOC) of the current file.
- This allows you to navigate easily through you document.
-\end_layout
-
-\begin_layout Standard
-The Navigate menu also offers to jump to the next error-, note- or label-box
- following the current cursor position.
-\end_layout
-
\begin_layout Subsection
-Bookmarks
+Reconfigure
\end_layout
\begin_layout Standard
-With this menu you are able to define your own bookmarks.
- This is useful when you're working on a large documents and often have
- to jump e.g.
- between sec.
-\begin_inset Formula $\,$
-\end_inset
+This menu reconfigures LyX.
+ That means LyX looks for LaTeX-packages and needed programs, see also section\InsetSpace ~
-2.6 and 6.3.
- To create bookmarks for this example, go to sec.
-\begin_inset Formula $\,$
-\end_inset
+\begin_inset LatexCommand ref
+reference "sec:Basic-LyX-Setup"
-2.6 and use the menu
-\family sans
-Save\InsetSpace ~
-Bookmark\InsetSpace ~
-1
-\family default
-.
- Then go to sec.
-\begin_inset Formula $\,$
\end_inset
-6.3 and use
-\family sans
-Save\InsetSpace ~
-Bookmark\InsetSpace ~
-
-\family default
-2.
- Now you can easily jump between these sections by using the menu or by
- the key bindings
-\family sans
-C-1
-\family default
- and
-\family sans
-C-2
-\family default
.
\end_layout
-\begin_layout Standard
-You can also use bookmarks to jump between several opened documents.
- The saved bookmarks are valid till the document is closed.
+\begin_layout Subsection
+Preferences
\end_layout
\begin_layout Standard
-If you wish to have more than three available bookmarks, look at sec.
+The preferences dialog is described in detail in chapter
\begin_inset Formula $\,$
\end_inset
\begin_inset LatexCommand ref
-reference "sec:ui"
+reference "cha:The-Preferences-dialog"
\end_inset
- for a detailed description.
-\end_layout
-
-\begin_layout Section
-The Documents Menu
-\end_layout
-
-\begin_layout Standard
-Here are listed all opened LyX files for an easy switching between them.
+.
\end_layout
\begin_layout Section
LaTeX\InsetSpace ~
Configuration
\family default
- creates a LyX-file with informations about the LaTeX-packages and classes
- found by LyX (see also sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ shows a LyX-document with informations about the LaTeX-packages and classes
+ found by LyX (see also section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:LaTeX-Setup"
buttons:
\end_layout
+\begin_layout Itemize
+\begin_inset Graphics
+ filename ../images/layout.xpm
+ width 0.9cm
+ height 0.9cm
+ BoundingBox 0bp 5bp 20bp 25bp
+ rotateOrigin center
+
+\end_inset
+
+ Default
+\end_layout
+
\begin_layout Itemize
\begin_inset Graphics
filename ../images/layout_Enumerate.xpm
\end_inset
for Portuguese.
- LyX supports internationalization of the user interface, see sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ LyX supports internationalization of the user interface, see section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Selecting-an-alternative"
The Font Sizes are adjusted as letter height in units of points.
72\InsetSpace \thinspace{}
points have the size of 1\InsetSpace \thinspace{}
-inch, see Appendix\InsetSpace ~
+inch, see appendix\InsetSpace ~
\begin_inset LatexCommand ref
reference "cha:Units-available-in"
\end_inset
pt.
- They are explained in detail in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ They are explained in detail in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sub:Document-Font"
\begin_layout Standard
The button instant preview is used to enable previewing snippets of your
document.
- This feature is described in sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ This feature is described in section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:Previewing-snippets-of"
usepackage{babel}
\series default
is a LaTeX-command to use the package babel.
- For an introduction to the LaTeX-Syntax, look at sec.
-\begin_inset Formula $\,$
-\end_inset
-
+ For an introduction to the LaTeX-Syntax, look at section\InsetSpace ~
\begin_inset LatexCommand ref
reference "sec:ERT"
\end_layout
\begin_layout Description
-Global ???
+Global ??
\end_layout
\begin_layout Description
\begin_layout Description
Auto\InsetSpace ~
-end ?
+end ??
\end_layout
\begin_layout Description
\backslash
-href{http://www.lyx.org/cgi-bin/viewcvs.cgi/*checkout*/lyx-devel/lib/CREDITS?rev=HE
-AD&content-type=text/plain}{
+href{http://www.lyx.org/trac/browser/lyx-devel/trunk/lib/CREDITS}{
\end_layout
\end_inset
\end_layout
+\begin_layout Bibliography
+\begin_inset LatexCommand bibitem
+key "Arabic"
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+href{http://wiki.lyx.org/Windows/Arabic}{
+\end_layout
+
+\end_inset
+
+Wiki-page
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+}
+\end_layout
+
+\end_inset
+
+ how to set up LyX for Arabic
+\end_layout
+
+\begin_layout Bibliography
+\begin_inset LatexCommand bibitem
+key "Armenian"
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+href{http://wiki.lyx.org/Windows/Armenian}{
+\end_layout
+
+\end_inset
+
+Wiki-page
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+}
+\end_layout
+
+\end_inset
+
+ how to set up LyX for Armenian
+\end_layout
+
+\begin_layout Bibliography
+\begin_inset LatexCommand bibitem
+key "Farsi"
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+href{http://wiki.lyx.org/Windows/Farsi}{
+\end_layout
+
+\end_inset
+
+Wiki-page
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+}
+\end_layout
+
+\end_inset
+
+ how to set up LyX for Farsi
+\end_layout
+
+\begin_layout Bibliography
+\begin_inset LatexCommand bibitem
+key "Hebrew"
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+href{http://wiki.lyx.org/Windows/Hebrew}{
+\end_layout
+
+\end_inset
+
+Wiki-page
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+}
+\end_layout
+
+\end_inset
+
+ how to set up LyX for Hebrew
+\end_layout
+
\begin_layout Standard
\series bold
projects / features.git / commitdiff