Tabular::CellData::CellData(Buffer * buf)
: cellno(0),
width(0),
- height(0),
- ascent(0),
- descent(0),
multicolumn(Tabular::CELL_NORMAL),
multirow(Tabular::CELL_NORMAL),
alignment(LYX_ALIGN_CENTER),
endfoot(false),
endlastfoot(false),
newpage(false),
- caption(false),
- valignment(LYX_VALIGN_TOP),
- maxheight(0)
+ caption(false)
{}
tabular.setCellWidth(cell, dim.wid);
maxAsc = max(maxAsc, dim.asc);
maxDesc = max(maxDesc, dim.des);
-
- // store the height for every cell
- // this is later needed in InsetTabular::draw to determine the valignment
- tabular.cell_info[r][c].height = dim.asc + dim.des;
- tabular.cell_info[r][c].ascent = dim.asc;
- tabular.cell_info[r][c].descent = dim.des;
}
int const top_space = tabular.row_info[r].top_space_default ?
default_line_space :
dim.wid = tabular.width() + 2 * ADD_TO_TABULAR_WIDTH;
}
-
bool InsetTabular::isCellSelected(Cursor & cur, row_type row, col_type col)
const
{
bool const original_selection_state = pi.selected;
idx_type idx = 0;
- int cy = 0;
first_visible_cell = Tabular::npos;
-
- // determine the highest cell because its valignment sets the row valignment
- // also store its height
- for (row_type r = 0; r < tabular.nrows(); ++r) {
- for (col_type c = 0; c < tabular.ncols(); ++c) {
- if (tabular.cell_info[r][c].height >= tabular.row_info[r].maxheight) {
- tabular.row_info[r].maxheight = tabular.cell_info[r][c].height;
- switch (tabular.getVAlignment(tabular.cellIndex(r, c))) {
- case Tabular::LYX_VALIGN_TOP:
- tabular.row_info[r].valignment = Tabular::LYX_VALIGN_TOP;
- break;
- case Tabular::LYX_VALIGN_MIDDLE:
- tabular.row_info[r].valignment = Tabular::LYX_VALIGN_MIDDLE;
- break;
- case Tabular::LYX_VALIGN_BOTTOM:
- tabular.row_info[r].valignment = Tabular::LYX_VALIGN_BOTTOM;
- break;
- }
- }
- }
- }
-
- // step over all cells
for (row_type r = 0; r < tabular.nrows(); ++r) {
int nx = x;
for (col_type c = 0; c < tabular.ncols(); ++c) {
first_visible_cell = idx;
pi.selected |= isCellSelected(cur, r, c);
-
- // set the position for the vertical alignment
- // if the cell is not the highest, align it according to the row valignment
- // and according to its own valignment
- // Note: The fractions of the scent values were found by testing
- // there is no bettwer way for the calculation because of LyX's definition
- // of ascent and descent. The correct way would be to calculate based
- // on the text height, the line space and paragraph separation.
- cy = y;
- if (tabular.cell_info[r][c].height < tabular.row_info[r].maxheight) {
- switch (tabular.row_info[r].valignment) {
- case Tabular::LYX_VALIGN_TOP:
- switch (tabular.getVAlignment(idx)) {
- case Tabular::LYX_VALIGN_TOP:
- break;
- case Tabular::LYX_VALIGN_MIDDLE:
- cy += - tabular.cell_info[r][c].descent / 2
- + 0.3 * tabular.cell_info[r][c].ascent;
- // FIXME the row also needs to be increased at the upper border
- break;
- case Tabular::LYX_VALIGN_BOTTOM:
- cy += - tabular.cell_info[r][c].descent
- + 0.6 * tabular.cell_info[r][c].ascent;
- // FIXME the row also needs to be increased at the upper border
- break;
- }
- break;
- case Tabular::LYX_VALIGN_MIDDLE:
- switch (tabular.getVAlignment(idx)) {
- case Tabular::LYX_VALIGN_TOP:
- cy += tabular.row_info[r].maxheight / 2
- - 0.75 * tabular.cell_info[r][c].ascent;
- break;
- case Tabular::LYX_VALIGN_MIDDLE:
- cy += tabular.row_info[r].maxheight / 2
- - tabular.cell_info[r][c].descent / 2
- - 0.5 * tabular.cell_info[r][c].ascent;
- break;
- case Tabular::LYX_VALIGN_BOTTOM:
- cy += tabular.row_info[r].maxheight / 2
- - tabular.cell_info[r][c].descent
- - 0.2 * tabular.cell_info[r][c].ascent;
- break;
- }
- break;
- case Tabular::LYX_VALIGN_BOTTOM:
- switch (tabular.getVAlignment(idx)) {
- case Tabular::LYX_VALIGN_TOP:
- cy += tabular.row_info[r].maxheight
- - 1.5 * tabular.cell_info[r][c].ascent;
- break;
- case Tabular::LYX_VALIGN_MIDDLE:
- cy += tabular.row_info[r].maxheight
- - tabular.cell_info[r][c].descent / 2
- - 1.2 * tabular.cell_info[r][c].ascent;
- // FIXME the row also needs to be increased at the lower border
- break;
- case Tabular::LYX_VALIGN_BOTTOM:
- cy += tabular.row_info[r].maxheight
- - tabular.cell_info[r][c].descent
- - 0.9 * tabular.cell_info[r][c].ascent;
- // FIXME the row also needs to be increased at the lower border
- break;
- }
- break;
- }
- }
-
int const cx = nx + tabular.textHOffset(idx);
+ int const cy = y + tabular.textVOffset(idx);
// Cache the Inset position.
bv->coordCache().insets().add(cell(idx).get(), cx, cy);
cell(idx)->draw(pi, cx, cy);