# cell type 4 is multirow-part cell
begin_cell2 = find_token(document.body, '<cell ', begin_cell2)
j = document.body[begin_cell2].find('multirow="4"')
- #document.warning("j: " + str(j))
if j <> -1:
span += 1
# remove bottom line of previous multirow-part cell
# so before the end of the layout...
document.body[bend:bend] = put_cmd_in_ert("}")
# ...and after the beginning
- document.body[blay+1:blay+1] = put_cmd_in_ert("\\multirow{" + str(span) + "}{" + col_width + "}{")
+ document.body[blay + 1:blay + 1] = put_cmd_in_ert("\\multirow{" + str(span) + "}{" + col_width + "}{")
# set index to end of current cell (that is now much bigger due to the ERT addition)
begin_cell = find_token(document.body, '</cell>', begin_cell) + 1
begin_row = find_token(document.body, '</row>', begin_row) + 1
def revert_multirowOffset(document):
" Revert multirow cells with offset in tables to TeX-code"
+ # this routine is the same as the revert_multirow routine except that
+ # it checks additionally for the offset
i = 0
+ begin_table = 0
+ bottom_index = 0
multirowOffset = False
+ # cell type 3 is multirow begin cell
+ i = find_token(document.body, '<cell multirow="3" mroffset=', i)
+ if i == -1:
+ return
+ # a multirow cell with offset was found
+ multirowOffset = True
while True:
- # cell type 3 is multirow begin cell
- i = find_token(document.body, '<cell multirow="3" mroffset=', i)
- if i == -1:
+ # find begin/end of table
+ begin_table = find_token(document.body, '<lyxtabular version=', begin_table)
+ if begin_table == -1:
break
- # a multirow cell with offset was found
- multirowOffset = True
- # remove the multirow tag, set the valignment to top
- # the the bottom line and offset
- document.body[i] = document.body[i].replace(' multirow="3" ', ' ')
- document.body[i] = document.body[i].replace('valignment="middle"', 'valignment="top"')
- document.body[i] = document.body[i].replace(' bottomline="true" ', ' ')
- document.body[i] = document.body[i].replace(' mroffset=', '')
- # store the offset and remove it
- begin = document.body[i].find('"')
- end = document.body[i].find('" ', begin)
- offset = document.body[i][begin + 1:end]
- document.body[i] = document.body[i].replace(document.body[i][begin:end + 1], '')
- # write ERT to create the multirow cell
- # use 2 rows and 2cm as default with because the multirow span
- # and the column width is only hardly accessible
- cend = find_token(document.body, "</cell>", i)
- if cend == -1:
- document.warning("Malformed LyX document: Could not find end of tabular cell.")
- i += 1
- continue
- blay = find_token(document.body, "\\begin_layout", i, cend)
- if blay == -1:
- document.warning("Can't find layout for cell!")
- i = j
- continue
- bend = find_end_of_layout(document.body, blay)
- if blay == -1:
- document.warning("Can't find end of layout for cell!")
- i = cend
- continue
- # do the later one first, so as not to mess up the numbering
- # we are wrapping the whole cell in this ert
- # so before the end of the layout...
- document.body[bend:bend] = put_cmd_in_ert("}")
- # ...and after the beginning
- document.body[blay+1:blay+1] = put_cmd_in_ert("\\multirow{2}{2cm}[" + offset + "]{")
- while True:
- # cell type 4 is multirow part cell
- k = find_token(document.body, '<cell multirow="4"', cend)
- if k == -1:
- break
- # remove the multirow tag, set the valignment to top
- # and remove the top line
- document.body[k] = document.body[k].replace(' multirow="4" ', ' ')
- document.body[k] = document.body[k].replace('valignment="middle"', 'valignment="top"')
- document.body[k] = document.body[k].replace(' topline="true" ', ' ')
- k += 1
- # this will always be ok
- i = cend
+ end_table = find_token(document.body, '</lyxtabular>', begin_table)
+ if end_table == -1:
+ document.warning("Malformed LyX document: Could not find end of table.")
+ break
+ # store the number of rows
+ begin = document.body[begin_table].find('rows="')
+ end = document.body[begin_table].find('" ', begin)
+ rows = document.body[begin_table][begin + 6:end]
+ # store the number of columns
+ begin = document.body[begin_table].find('columns="')
+ end = document.body[begin_table].find('">', begin)
+ columns = document.body[begin_table][begin + 9:end]
+ # find column number of the multirows with offset
+ begin_row = begin_table
+ for row in range(int(rows)):
+ begin_row = find_token(document.body, '<row>', begin_row)
+ begin_cell = begin_row
+ for column in range(int(columns)):
+ begin_cell = find_token(document.body, '<cell ', begin_cell)
+ i = document.body[begin_cell].find('multirow="3" mroffset=')
+ if i <> -1:
+ # we found a multirow in column number column - 1
+ # store column width
+ begin = document.body[begin_table + 2 + column].find('width="')
+ end = document.body[begin_table + 2 + column].find('">', begin)
+ col_width = document.body[begin_table + 2 + column][begin + 7:end]
+ # "0pt" means that no width is specified
+ if col_width == "0pt":
+ col_width = "*"
+ # determine the number of cells that are part of the multirow
+ begin_row2 = begin_table
+ # we have the multirow begin cell as minimal span
+ span = 1
+ # go one row behind the row where we found the multirow begin
+ row2 = -1
+ while row2 < row:
+ begin_row2 = find_token(document.body, '<row>', begin_row2)
+ row2 += 1
+ begin_row2 += 1
+ # step now through all rows until we reach the last table row
+ rows2 = row
+ while row2 < rows:
+ begin_row2 = find_token(document.body, '<row>', begin_row2)
+ begin_cell2 = begin_row2
+ # look now for the column-th cell in the row
+ column2 = 0
+ while column2 < column:
+ begin_cell2 = find_token(document.body, '<cell ', begin_cell2)
+ column2 += 1
+ begin_cell2 += 1
+ # cell type 4 is multirow-part cell
+ begin_cell2 = find_token(document.body, '<cell ', begin_cell2)
+ j = document.body[begin_cell2].find('multirow="4"')
+ if j <> -1:
+ span += 1
+ # remove bottom line of previous multirow-part cell
+ if span > 1:
+ document.body[bottom_index] = document.body[bottom_index].replace(' bottomline="true" ', ' ')
+ # save index to be later able to remove bottom line
+ bottom_index = begin_cell2
+ # remove the multirow tag, set the valignment to top
+ # and remove the top line
+ document.body[begin_cell2] = document.body[begin_cell2].replace(' multirow="4" ', ' ')
+ document.body[begin_cell2] = document.body[begin_cell2].replace('valignment="middle"', 'valignment="top"')
+ document.body[begin_cell2] = document.body[begin_cell2].replace(' topline="true" ', ' ')
+ else:
+ break
+ begin_row2 = find_token(document.body, '</row>', begin_row2)
+ # remove the multirow tag, set the valignment to top,
+ # remove the the bottom line and offset
+ document.body[begin_cell] = document.body[begin_cell].replace(' multirow="3" ', ' ')
+ document.body[begin_cell] = document.body[begin_cell].replace('valignment="middle"', 'valignment="top"')
+ # only remove the bottom line if it is not a single cell as multirow
+ if span > 1:
+ document.body[begin_cell] = document.body[begin_cell].replace(' bottomline="true" ', ' ')
+ document.body[begin_cell] = document.body[begin_cell].replace(' mroffset=', '')
+ # store the offset and remove it
+ begin = document.body[begin_cell].find('"')
+ end = document.body[begin_cell].find('" ', begin)
+ offset = document.body[begin_cell][begin + 1:end]
+ document.body[begin_cell] = document.body[begin_cell].replace(document.body[begin_cell][begin:end + 1], '')
+ # write ERT to create the multirow cell
+ cend = find_token(document.body, "</cell>", begin_cell)
+ if cend == -1:
+ document.warning("Malformed LyX document: Could not find end of tabular cell.")
+ i += 1
+ continue
+ blay = find_token(document.body, "\\begin_layout", begin_cell, cend)
+ if blay == -1:
+ document.warning("Can't find layout for cell!")
+ i = j
+ continue
+ bend = find_end_of_layout(document.body, blay)
+ if bend == -1:
+ document.warning("Can't find end of layout for cell!")
+ i = cend
+ continue
+ # do the later one first, so as not to mess up the numbering
+ # we are wrapping the whole cell in this ert
+ # so before the end of the layout...
+ document.body[bend:bend] = put_cmd_in_ert("}")
+ # ...and after the beginning
+ document.body[blay + 1:blay + 1] = put_cmd_in_ert("\\multirow{" + str(span) + "}{" + col_width + "}[" + offset + "]{")
+ # set index to end of current cell (that is now much bigger due to the ERT addition)
+ begin_cell = find_token(document.body, '</cell>', begin_cell) + 1
+ begin_row = find_token(document.body, '</row>', begin_row) + 1
+
+ # go to the next table
+ begin_table = end_table + 1
+
if multirowOffset == True:
add_to_preamble(document, ["\\usepackage{multirow}"])