" Revert multirow cells with offset in tables to TeX-code"
# this routine is the same as the revert_multirow routine except that
# it checks additionally for the offset
- i = 0
- begin_table = 0
- bottom_index = 0
- multirowOffset = False
- # cell type 3 is multirow begin cell
- i = find_token(document.body, '<cell multirow="3" mroffset=', i)
+
+ # first, let's find out if we need to do anything
+ i = find_token(document.body, '<cell multirow="3" mroffset=', 0)
if i == -1:
return
- # a multirow cell with offset was found
- multirowOffset = True
+
+ add_to_preamble(document, ["\\usepackage{multirow}"])
+
+ rgx = re.compile(r'mroffset="[^"]+?"')
+ begin_table = 0
+
while True:
- # find begin/end of table
- begin_table = find_token(document.body, '<lyxtabular version=', begin_table)
- if begin_table == -1:
- break
- end_table = find_token(document.body, '</lyxtabular>', begin_table)
- if end_table == -1:
- document.warning("Malformed LyX document: Could not find end of table.")
- break
- # store the number of rows
- begin = document.body[begin_table].find('rows="')
- end = document.body[begin_table].find('" ', begin)
- rows = document.body[begin_table][begin + 6:end]
- # store the number of columns
- begin = document.body[begin_table].find('columns="')
- end = document.body[begin_table].find('">', begin)
- columns = document.body[begin_table][begin + 9:end]
- # find column number of the multirows with offset
- begin_row = begin_table
- for row in range(int(rows)):
- begin_row = find_token(document.body, '<row>', begin_row)
- begin_cell = begin_row
- for column in range(int(columns)):
- begin_cell = find_token(document.body, '<cell ', begin_cell)
- i = document.body[begin_cell].find('multirow="3" mroffset=')
- if i <> -1:
- # we found a multirow in column number column - 1
- # store column width
- begin = document.body[begin_table + 2 + column].find('width="')
- end = document.body[begin_table + 2 + column].find('">', begin)
- col_width = document.body[begin_table + 2 + column][begin + 7:end]
+ # find begin/end of table
+ begin_table = find_token(document.body, '<lyxtabular version=', begin_table)
+ if begin_table == -1:
+ break
+ end_table = find_end_of(document.body, begin_table, '<lyxtabular', '</lyxtabular>')
+ if end_table == -1:
+ document.warning("Malformed LyX document: Could not find end of table.")
+ begin_table += 1
+ continue
+ # does this table have multirow?
+ i = find_token(document.body, '<cell multirow="3"', begin_table, end_table)
+ if i == -1:
+ begin_table = end_table
+ continue
+
+ # store the number of rows and columns
+ numrows = get_option_value(document.body[begin_table], "rows")
+ numcols = get_option_value(document.body[begin_table], "columns")
+ try:
+ numrows = int(numrows)
+ numcols = int(numcols)
+ except:
+ document.warning(numrows)
+ document.warning("Unable to determine rows and columns!")
+ begin_table = end_table
+ continue
+
+ mrstarts = []
+ multirows = []
+ # collect info on rows and columns of this table.
+ begin_row = begin_table
+ for row in range(numrows):
+ begin_row = find_token(document.body, '<row>', begin_row, end_table)
+ if begin_row == -1:
+ document.warning("Can't find row " + str(row + 1))
+ break
+ end_row = find_end_of(document.body, begin_row, '<row>', '</row>')
+ if end_row == -1:
+ document.warning("Can't find end of row " + str(row + 1))
+ break
+ begin_cell = begin_row
+ multirows.append([])
+ for column in range(numcols):
+ begin_cell = find_token(document.body, '<cell ', begin_cell, end_row)
+ if begin_cell == -1:
+ document.warning("Can't find column " + str(column + 1) + \
+ "in row " + str(row + 1))
+ break
+ # NOTE
+ # this will fail if someone puts "</cell>" in a cell, but
+ # that seems fairly unlikely.
+ end_cell = find_end_of(document.body, begin_cell, '<cell', '</cell>')
+ if end_cell == -1:
+ document.warning("Can't find end of column " + str(column + 1) + \
+ "in row " + str(row + 1))
+ break
+ multirows[row].append([begin_cell, end_cell, 0])
+ if document.body[begin_cell].find('multirow="3" mroffset=') != -1:
+ multirows[row][column][2] = 3 # begin multirow
+ mrstarts.append([row, column])
+ elif document.body[begin_cell].find('multirow="4"') != -1:
+ multirows[row][column][2] = 4 # in multirow
+ begin_cell = end_cell
+ begin_row = end_row
+ # end of table info collection
+
+ # work from the back to avoid messing up numbering
+ mrstarts.reverse()
+ for m in mrstarts:
+ row = m[0]
+ col = m[1]
+ # get column width
+ col_width = get_option_value(document.body[begin_table + 2 + col], "width")
# "0pt" means that no width is specified
- if col_width == "0pt":
+ if not col_width or col_width == "0pt":
col_width = "*"
# determine the number of cells that are part of the multirow
- begin_row2 = begin_table
- # we have the multirow begin cell as minimal span
- span = 1
- # go one row behind the row where we found the multirow begin
- row2 = -1
- while row2 < row:
- begin_row2 = find_token(document.body, '<row>', begin_row2)
- row2 += 1
- begin_row2 += 1
- # step now through all rows until we reach the last table row
- rows2 = row
- while row2 < rows:
- begin_row2 = find_token(document.body, '<row>', begin_row2)
- begin_cell2 = begin_row2
- # look now for the column-th cell in the row
- column2 = 0
- while column2 < column:
- begin_cell2 = find_token(document.body, '<cell ', begin_cell2)
- column2 += 1
- begin_cell2 += 1
- # cell type 4 is multirow-part cell
- begin_cell2 = find_token(document.body, '<cell ', begin_cell2)
- j = document.body[begin_cell2].find('multirow="4"')
- if j <> -1:
- span += 1
+ nummrs = 1
+ for r in range(row + 1, numrows):
+ if multirows[r][col][2] != 4:
+ break
+ nummrs += 1
+ # take the opportunity to revert this line
+ lineno = multirows[r][col][0]
+ document.body[lineno] = document.body[lineno].\
+ replace(' multirow="4" ', ' ').\
+ replace('valignment="middle"', 'valignment="top"').\
+ replace(' topline="true" ', ' ')
# remove bottom line of previous multirow-part cell
- if span > 1:
- document.body[bottom_index] = document.body[bottom_index].replace(' bottomline="true" ', ' ')
- # save index to be later able to remove bottom line
- bottom_index = begin_cell2
- # remove the multirow tag, set the valignment to top
- # and remove the top line
- document.body[begin_cell2] = document.body[begin_cell2].replace(' multirow="4" ', ' ')
- document.body[begin_cell2] = document.body[begin_cell2].replace('valignment="middle"', 'valignment="top"')
- document.body[begin_cell2] = document.body[begin_cell2].replace(' topline="true" ', ' ')
- else:
- break
- begin_row2 = find_token(document.body, '</row>', begin_row2)
- # remove the multirow tag, set the valignment to top,
- # remove the the bottom line and offset
- document.body[begin_cell] = document.body[begin_cell].replace(' multirow="3" ', ' ')
- document.body[begin_cell] = document.body[begin_cell].replace('valignment="middle"', 'valignment="top"')
- # only remove the bottom line if it is not a single cell as multirow
- if span > 1:
- document.body[begin_cell] = document.body[begin_cell].replace(' bottomline="true" ', ' ')
- document.body[begin_cell] = document.body[begin_cell].replace(' mroffset=', '')
- # store the offset and remove it
- begin = document.body[begin_cell].find('"')
- end = document.body[begin_cell].find('" ', begin)
- offset = document.body[begin_cell][begin + 1:end]
- document.body[begin_cell] = document.body[begin_cell].replace(document.body[begin_cell][begin:end + 1], '')
- # write ERT to create the multirow cell
- cend = find_token(document.body, "</cell>", begin_cell)
- if cend == -1:
- document.warning("Malformed LyX document: Could not find end of tabular cell.")
- i += 1
- continue
- blay = find_token(document.body, "\\begin_layout", begin_cell, cend)
+ lineno = multirows[r-1][col][0]
+ document.body[lineno] = document.body[lineno].replace(' bottomline="true" ', ' ')
+ # revert beginning cell
+ bcell = multirows[row][col][0]
+ ecell = multirows[row][col][1]
+ offset = get_option_value(document.body[bcell], "mroffset")
+ document.body[bcell] = document.body[bcell].\
+ replace(' multirow="3" ', ' ').\
+ replace('valignment="middle"', 'valignment="top"')
+ # remove mroffset option
+ document.body[bcell] = rgx.sub('', document.body[bcell])
+
+ blay = find_token(document.body, "\\begin_layout", bcell, ecell)
if blay == -1:
document.warning("Can't find layout for cell!")
- i = j
continue
bend = find_end_of_layout(document.body, blay)
if bend == -1:
document.warning("Can't find end of layout for cell!")
- i = cend
continue
# do the later one first, so as not to mess up the numbering
# we are wrapping the whole cell in this ert
# so before the end of the layout...
document.body[bend:bend] = put_cmd_in_ert("}")
# ...and after the beginning
- document.body[blay + 1:blay + 1] = put_cmd_in_ert("\\multirow{" + str(span) + "}{" + col_width + "}[" + offset + "]{")
- # set index to end of current cell (that is now much bigger due to the ERT addition)
- begin_cell = find_token(document.body, '</cell>', begin_cell) + 1
- begin_row = find_token(document.body, '</row>', begin_row) + 1
-
- # go to the next table
- begin_table = end_table + 1
+ document.body[blay + 1:blay + 1] = \
+ put_cmd_in_ert("\\multirow{" + str(nummrs) + "}{" + col_width + "}[" \
+ + offset + "]{")
- if multirowOffset == True:
- add_to_preamble(document, ["\\usepackage{multirow}"])
+ # on to the next table
+ begin_table = end_table
##
projects / features.git / commitdiff