- also support in the lyx2lyx argument conversion routine the case that "}{" appears in 2 consecutive ERTs
- also fix in lyx2lyx_tools.py the output of ERTs (it is important that we write the same amount of lines as if the ERT would have been inserted via LyX 2.0 or lyX 2.1)
# don't use the following styles
NoStyle Part
-NoCounter part
+NoCounter part
NoStyle Part*
NoStyle Chapter
-NoCounter chapter
+NoCounter chapter
NoStyle Chapter*
NoStyle Subparagraph
-NoCounter subparagraph
+NoCounter subparagraph
NoStyle Subparagraph*
-Style Teaser
+Style "TOG online ID"
Margin Dynamic
LatexType Command
- LatexName teaser
+ LatexName TOGonlineid
Category FrontMatter
- InTitle 1
+ InPreamble 1
ParSkip 0.4
BottomSep 0.5
Align Left
LabelSep xx
LabelType Static
- LabelString "Teaser image:"
+ LabelString "Oneline ID:"
LabelFont
Color Green
Series Bold
End
+Style "TOG volume"
+ CopyStyle "TOG online ID"
+ LatexName TOGvolume
+ LabelString "Volume number:"
+End
+
+
+Style "TOG number"
+ CopyStyle "TOG online ID"
+ LatexName TOGnumber
+ LabelString "Article number:"
+End
+
+
+Style "TOG article DOI"
+ CopyStyle "TOG online ID"
+ LatexName TOGarticleDOI
+ LabelString "Article DOI:"
+End
+
+
+Style "TOG project URL"
+ CopyStyle "TOG online ID"
+ LatexName TOGprojectURL
+ KeepEmpty 1
+ LabelString "Project URL:"
+End
+
+
+Style "TOG video URL"
+ CopyStyle "TOG project URL"
+ LatexName TOGvideoURL
+ LabelString "Video URL:"
+End
+
+
+Style "TOG data URL"
+ CopyStyle "TOG project URL"
+ LatexName TOGdataURL
+ LabelString "Data URL:"
+End
+
+
+Style "TOG code URL"
+ CopyStyle "TOG project URL"
+ LatexName TOGcodeURL
+ LabelString "Code URL:"
+End
+
+
Input stdtitle.inc
Input stdstruct.inc
+NoStyle Date
-InsetLayout "Flex:CRcat"
- LyxType custom
- LatexType command
- LatexName CRcat
- Decoration classic
- LabelString "CR category"
+# modify the Title definition from stdtitle.inc
+Style Title
+ InTitle 0
+ InPreamble 1
Font
- Color foreground
- Size Small
- Family Roman
- Shape Up
- Series Medium
- Misc No_Emph
- Misc No_Noun
- Misc No_Bar
+ Family Sans
EndFont
+End
+
+
+# modify the Author definition from stdtitle.inc
+Style Author
+ InTitle 0
+ InPreamble 1
+End
+
+
+Style "PDF author"
+ CopyStyle "TOG project URL"
+ LatexName pdfauthor
+ LabelString "PDF author:"
+End
+
+Style Keywords
+ CopyStyle "TOG project URL"
+ LatexName keywords
+ LabelType Static
+ LabelString "Keywords:"
LabelFont
- Color green
- Size Small
+ Series Bold
+ Size Normal
+ EndFont
+End
+
+
+Style Teaser
+ Margin Dynamic
+ LatexType Command
+ LatexName teaser
+ Category FrontMatter
+ ParSkip 0.4
+ BottomSep 0.5
+ Align Left
+ LabelSep xx
+ LabelType Static
+ LabelString "Teaser image:"
+ LabelFont
+ Series Bold
+ Size Normal
+ Color Green
EndFont
End
Style "CR categories"
CopyStyle Abstract
LatexName CRcatlist
- Category FrontMatter
- LeftMargin M
- LabelType Top_Environment
- LabelString "Computing Review Categories"
+ Margin Dynamic
+ ParbreakIsNewline 1
+ LeftMargin ""
+ LabelSep xx
+ LabelType Static
+ LabelString "CR Categories:"
LabelFont
Series Bold
Size Normal
End
+InsetLayout "Flex:CRcat"
+ LyxType custom
+ LatexType command
+ LatexName CRcat
+ Decoration classic
+ LabelString "CR category"
+ Font
+ Color foreground
+ Size Small
+ Family Roman
+ Shape Up
+ Series Medium
+ Misc No_Emph
+ Misc No_Noun
+ Misc No_Bar
+ EndFont
+ LabelFont
+ Color green
+ Size Small
+ EndFont
+ Argument 1
+ Mandatory 1
+ LabelString "CR-number"
+ Tooltip "Number of the category"
+ EndArgument
+ Argument 2
+ Mandatory 1
+ LabelString "Subcategory"
+ Tooltip "Subcategory"
+ EndArgument
+ Argument 3
+ Mandatory 1
+ LabelString "Third-level"
+ Tooltip "Third-level of the category"
+ EndArgument
+End
+
+
+InsetLayout "Flex:ShortCite"
+ CopyStyle "Flex:CRcat"
+ ResetArgs 1
+ LatexName shortcite
+ Decoration Conglomerate
+ LabelString "Short cite"
+End
+
+
+InsetLayout "Flex:Thanks"
+ CopyStyle "Flex:ShortCite"
+ LatexName thanks
+ Decoration Classic
+ LabelString "E-mail"
+ LabelFont
+ Color blue
+ EndFont
+End
+
+
Style Acknowledgments
CopyStyle Abstract
LatexName acks
Returns a list of strings, with the lines so wrapped.
'''
- ret = ["\\begin_inset ERT", "status collapsed", "\\begin_layout Plain Layout", ""]
+ ret = ["\\begin_inset ERT", "status collapsed", "", "\\begin_layout Plain Layout", ""]
# It will be faster for us to work with a single string internally.
# That way, we only go through the unicode_reps loop once.
if type(arg) is list:
s = s.replace(rep[1], rep[0].replace('\\\\', '\\'))
s = s.replace('\\', "\\backslash\n")
ret += s.splitlines()
- ret += ["\\end_layout", "\\end_inset"]
+ ret += ["\\end_layout", "", "\\end_inset"]
return ret
return
-def convert_Argument_to_TeX_brace(document, line, n, nmax, environment):
+def convert_TeX_brace_to_Argument(document, line, n, nmax, inset, environment):
'''
Converts TeX code to an InsetArgument
!!! Be careful if the braces are different in your case as expected here:
- - }{ separates mandatory arguments of commands
+ - "}{" separates mandatory arguments of commands
+ - "}" + "{" separates mandatory arguments of commands
+ - "}" + " " + "{" separates mandatory arguments of commands
- { and } surround a mandatory argument of an environment
usage:
- convert_Argument_to_TeX_brace(document, LineOfBeginLayout, StartArgument, EndArgument, isEnvironment)
- LineOfBeginLayout is the line of the \begin_layout statement
+ convert_TeX_brace_to_Argument(document, LineOfBeginLayout/Inset, StartArgument, EndArgument, isInset, isEnvironment)
+ LineOfBeginLayout/Inset is the line of the \begin_layout or \begin_inset statement
StartArgument is the number of the first ERT that needs to be converted
EndArgument is the number of the last ERT that needs to be converted
- isEnvironment must be true, if the layout id for a LaTeX environment
+ isInset must be true, if braces inside an InsetLayout needs to be converted
+ isEnvironment must be true, if the layout is for a LaTeX environment
- Notes:
- - this routine will fail if the user has additional TeX-braces (there is nothing we can do)
- - this routine can currently handle only one mandatory argument of environments
- Todo:
- - support the case that }{ is in the file in 2 separate ERTs
+ Note: this routine can currently handle only one mandatory argument of environments
'''
lineArg = line
while lineArg != -1 and n < nmax + 1:
lineArg = find_token(document.body, "\\begin_inset ERT", lineArg)
if environment == False and lineArg != -1:
bracePair = find_token(document.body, "}{", lineArg)
- # assure that the "}{" is in this ERT (5 is or files saved with LyX 2.0, 4 for files exported by LyX 2.1)
- if bracePair == lineArg + 5 or bracePair == lineArg + 4:
+ # assure that the "}{" is in this ERT
+ if bracePair == lineArg + 5:
end = find_token(document.body, "\\end_inset", bracePair)
document.body[lineArg : end + 1] = ["\\end_layout", "", "\\end_inset"]
if n == 1:
- document.body[line + 1 : line + 1] = ["\\begin_inset Argument " + str(n), "status open", "", "\\begin_layout Plain Layout"]
+ if inset == False:
+ document.body[line + 1 : line + 1] = ["\\begin_inset Argument " + str(n), "status open", "", "\\begin_layout Plain Layout"]
+ else:
+ document.body[line + 4 : line + 4] = ["\\begin_inset Argument " + str(n), "status open", "", "\\begin_layout Plain Layout"]
else:
- document.body[endn + 1 : endn + 1] = ["\\begin_inset Argument " + str(n), "status open", "", "\\begin_layout Plain Layout"]
+ document.body[endn : endn] = ["\\begin_inset Argument " + str(n), "status open", "", "\\begin_layout Plain Layout"]
n = n + 1
endn = end
+ # now check the case that we have "}" + "{" in two ERTs
else:
- lineArg = lineArg + 1
+ endBrace = find_token(document.body, "}", lineArg)
+ if endBrace == lineArg + 5:
+ beginBrace = find_token(document.body, "{", endBrace)
+ # assure that the ERTs are consecutive (11 or 12 depending if there is a space between the ERTs or not)
+ if beginBrace == endBrace + 11 or beginBrace == endBrace + 12:
+ end = find_token(document.body, "\\end_inset", beginBrace)
+ document.body[lineArg : end + 1] = ["\\end_layout", "", "\\end_inset"]
+ if n == 1:
+ if inset == False:
+ document.body[line + 1 : line + 1] = ["\\begin_inset Argument " + str(n), "status open", "", "\\begin_layout Plain Layout"]
+ else:
+ document.body[line + 4 : line + 4] = ["\\begin_inset Argument " + str(n), "status open", "", "\\begin_layout Plain Layout"]
+ else:
+ document.body[endn : endn] = ["\\begin_inset Argument " + str(n), "status open", "", "\\begin_layout Plain Layout"]
+ n = n + 1
+ # set the line where the next argument will be inserted
+ if beginBrace == endBrace + 11:
+ endn = end - 11
+ else:
+ endn = end - 12
+ else:
+ lineArg = lineArg + 1
if environment == True and lineArg != -1:
opening = find_token(document.body, "{", lineArg)
if opening == lineArg + 5 or opening == lineArg + 4: # assure that the "{" is in this ERT
if i != -1:
i = find_token(document.body, "\\begin_layout Page headings", i)
if i != -1:
- convert_Argument_to_TeX_brace(document, i, 1, 1, False)
+ convert_TeX_brace_to_Argument(document, i, 1, 1, False, False)
i = i + 1
if j != -1:
j = find_token(document.body, "\\begin_layout Biography without photo", j)
if j != -1:
- convert_Argument_to_TeX_brace(document, j, 1, 1, True)
+ convert_TeX_brace_to_Argument(document, j, 1, 1, False, True)
j = j + 1
if k != -1:
# assure that we don't handle Biography Biography without photo
continue
if k != -1:
# the argument we want to convert is the second one
- convert_Argument_to_TeX_brace(document, k, 2, 2, True)
+ convert_TeX_brace_to_Argument(document, k, 2, 2, False, True)
k = k + 1
if i == -1 and j == -1 and k == -1:
return
if i != -1:
i = find_token(document.body, "\\begin_layout Altaffilation", i)
if i != -1:
- convert_Argument_to_TeX_brace(document, i, 1, 1, False)
+ convert_TeX_brace_to_Argument(document, i, 1, 1, False, False)
i = i + 1
if i == -1:
return
if i != -1:
i = find_token(document.body, "\\begin_layout Author affiliation", i)
if i != -1:
- convert_Argument_to_TeX_brace(document, i, 1, 1, False)
+ convert_TeX_brace_to_Argument(document, i, 1, 1, False, False)
i = i + 1
if i == -1:
return
if i != -1:
i = find_token(document.body, "\\begin_layout MarkBoth", i)
if i != -1:
- convert_Argument_to_TeX_brace(document, i, 1, 1, False)
+ convert_TeX_brace_to_Argument(document, i, 1, 1, False, False)
i = i + 1
if i == -1:
return
if i != -1:
i = find_token(document.body, "\\begin_layout Conference", i)
if i != -1:
- convert_Argument_to_TeX_brace(document, i, 1, 1, False)
+ convert_TeX_brace_to_Argument(document, i, 1, 1, False, False)
i = i + 1
if j != -1:
j = find_token(document.body, "\\begin_layout Author", j)
if j != -1:
- convert_Argument_to_TeX_brace(document, j, 1, 2, False)
+ convert_TeX_brace_to_Argument(document, j, 1, 2, False, False)
j = j + 1
if i == -1 and j == -1:
return
+def revert_SIGGRAPH(document):
+ " Reverts InsetArgument of Flex CRcat to TeX-code "
+ if document.textclass == "acmsiggraph":
+ i = 0
+ while True:
+ if i != -1:
+ i = find_token(document.body, "\\begin_inset Flex CRcat", i)
+ if i != -1:
+ revert_Argument_to_TeX_brace(document, i, 1, 3, False)
+ i = i + 1
+ if i == -1:
+ return
+
+
+def convert_SIGGRAPH(document):
+ " Converts ERT of Flex CRcat to InsetArgument "
+ if document.textclass == "acmsiggraph":
+ i = 0
+ while True:
+ if i != -1:
+ i = find_token(document.body, "\\begin_inset Flex CRcat", i)
+ if i != -1:
+ convert_TeX_brace_to_Argument(document, i, 1, 3, True, False)
+ i = i + 1
+ if i == -1:
+ return
+
+
def revert_literate(document):
" Revert Literate document to old format "
if del_token(document.header, "noweb", 0):
[444, []],
[445, []],
[446, [convert_latexargs]],
- [447, [convert_IEEEtran, convert_AASTeX, convert_AGUTeX, convert_IJMP, convert_SIGPLAN]],
+ [447, [convert_IEEEtran, convert_AASTeX, convert_AGUTeX, convert_IJMP, convert_SIGPLAN, convert_SIGGRAPH]],
[448, [convert_literate]],
[449, []]
]
revert = [
[448, [revert_itemargs]],
[447, [revert_literate]],
- [446, [revert_IEEEtran, revert_AASTeX, revert_AGUTeX, revert_IJMP, revert_SIGPLAN]],
+ [446, [revert_IEEEtran, revert_AASTeX, revert_AGUTeX, revert_IJMP, revert_SIGPLAN, revert_SIGGRAPH]],
[445, [revert_latexargs]],
[444, [revert_uop]],
[443, [revert_biolinum]],
\begin_document
\begin_header
\textclass acmsiggraph
-\begin_preamble
-% for the following cases use the listed document class option:
-% [annual] - Technical paper accepted for presentation at the ACM SIGGRAPH
-% or SIGGRAPH Asia annual conference.
-% [sponsored] - Short or full-length technical paper accepted for
-% presentation at an event sponsored by ACM SIGGRAPH
-% (but not the annual conference Technical Papers program).
-% [abstract] - A one-page abstract of your accepted content
-% (Technical Sketches, Posters, Emerging Technologies, etc.).
-% Content greater than one page in length should use the "[sponsored]"
-% parameter.
-% [preprint] - A preprint version of your final content.
-% [review] - A technical paper submitted for review. Includes line
-% numbers and anonymization of author and affiliation information.
-
-% When you submit your paper for review, please use the \TOGonlineID''
-% command to include the online ID value assigned to your paper by the
-% submission management system. Replace '45678' with the value you were
-% assigned.
-\TOGonlineid{45678}
-
-% If you are preparing a preprint of your accepted paper, and your paper
-% will be published in an issue of the ACM "Transactions on Graphics''
-% journal, replace the "0'' values in the commands below with the correct
-% volume and number values for that issue - you'll get them before your
-% final paper is due.
-\TOGvolume{0}
-\TOGnumber{0}
-
-% The TOGarticleDOI' command accepts the DOI information provided to you
-% during production, and which makes up the URLs which identifies the ACM
-% article page and direct PDF link in the ACM Digital Library.
-% Replace "1111111.2222222'' with the values you are given.
-\TOGarticleDOI{1111111.2222222}
-
-% If you would like to include links to personal repositories for auxiliary
-% material related your research contribution, you may use one or more of
-% these commands to define an appropriate URL. The "\TOGlinkslist'' command
-% found just before the first section of your document will add hyperlinked
-% icons to your document, in addition to hyperlinked icons which point to
-% the ACM Digital Library article page and the ACM Digital Library-held PDF.
-\TOGprojectURL{}
-\TOGvideoURL{}
-\TOGdataURL{}
-\TOGcodeURL{}
-
-% Paper title.
-\title{Global Illumination for Fun and Profit}
-
-% Author and Affiliation (single author).
-%\author{Name \thanks{e-mail: name@unknown.uu}\\ Research Institute}
-
-% Author and Affiliation (multiple authors).
-\author{Roy G. Biv\thanks{e-mail: roy.g.biv@aol.com}\\ Starbucks Research %
-\and Ed Grimley\thanks{e-mail:ed.grimley@aol.com}\\Nigel Mansell\thanks{nigelf1@msn.com}\\ Grimley Widgets, Inc. %
-\and Martha Stewart\thanks{e-mail:martha.stewart@marthastewart.com}\\ Martha Stewart Enterprises \\ Microsoft Research}
-
-% The ``pdfauthor'' command accepts the authors of the work,
-% comma-delimited, and adds this information to the PDF metadata.
-\pdfauthor{Roy G. Biv, Ed Grimley, Nigel Mansell, Martha Stewart}
-
-% Keywords that describe your work.
-\keywords{radiosity, global illumination, constant time}
-\end_preamble
\options annual
\use_default_options false
\maintain_unincluded_children false
\begin_layout Plain Layout
\series bold
-Note:
+Note:
\series default
- The author, affiliation, email addresses, and the document title have to
- set up in the LaTeX preamble of this document!
+use one of these document class options:
\end_layout
+\begin_layout Plain Layout
+
+\family sans
+annual
+\family default
+ - Technical paper accepted for presentation at the ACM SIGGRAPH or SIGGRAPH
+ Asia annual conference.
+\end_layout
+
+\begin_layout Plain Layout
+
+\family sans
+sponsored
+\family default
+ - Short or full-length technical paper accepted for presentation at an
+ event sponsored by ACM SIGGRAPH (but not the annual conference Technical
+ Papers program).
+\end_layout
+
+\begin_layout Plain Layout
+
+\family sans
+abstract
+\family default
+ - A one-page abstract of your accepted content (Technical Sketches, Posters,
+ Emerging Technologies, etc.).
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset space \hspace*{}
+\length 1.5cm
\end_inset
+Content greater than one page in length should use the document class option
+
+\family sans
+sponsored
+\family default
+.
+\end_layout
+
+\begin_layout Plain Layout
+\family sans
+preprint
+\family default
+ - A preprint version of your final content.
\end_layout
-\begin_layout Standard
+\begin_layout Plain Layout
+
+\family sans
+review
+\family default
+ - A technical paper submitted for review.
+ Includes line numbers and anonymization of author and affiliation information.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout TOG online ID
+45678
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+Should be filled with the online ID value you received when you submitted
+ your technical paper.
+ It will be printed out if you prepare a
+\family sans
+review
+\family default
+ version of your paper.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout TOG volume
+0
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+Optional.
+\end_layout
+
+\begin_layout Plain Layout
+Should your technical paper be accepted, you will be given three pieces
+ of information: the volume and number of the issue of the ACM Transactions
+ on Graphics journal in which your paper will be published, and the ``article
+ DOI'' value, which is unique to your paper and provides the link to your
+ paper's page in the ACM Digital Library.
+ Fill in the volume, number' and article DOI with the three pieces of informatio
+n you receive.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout TOG number
+0
+\end_layout
+
+\begin_layout TOG article DOI
+1111111.2222222
+\end_layout
+
+\begin_layout TOG project URL
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+Optional.
+\end_layout
+
+\begin_layout Plain Layout
+By default, your technical paper will contain hyperlinked icons which point
+ to your paper's article page in the ACM Digital Library, and to the paper
+ itself in the ACM Digital Library.
+ You may wish to add one or more links to your own resources.
+ If any of the following four definitions have URLs in them, an appropriate
+ hyperlinked icon will be added to the list.
+ See the note behinf the command
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout TOG video URL
+
+\end_layout
+
+\begin_layout TOG data URL
+
+\end_layout
+
+\begin_layout TOG code URL
+
+\end_layout
+
+\begin_layout Title
+The Title of Your Paper Goes Here
\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+Use capital letters as appropriate.
+ Setting the entire title in upper-case letters is not correct, nor is capitaliz
+ing only the first letter of the title.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Author
+Roy Giv
+\begin_inset Flex Thanks
status open
\begin_layout Plain Layout
+e-mail: roybiv@aol.com
+\end_layout
-\series bold
-Note:
-\series default
- The document type (review etc.) is specified by using one of the document
- class options listed in the preamble of this file.
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+Star Research
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+and
+\end_layout
+
+\end_inset
+
+ Ed Grim
+\begin_inset Flex Thanks
+status open
+
+\begin_layout Plain Layout
+e-mail: ed.grim@aol.com
+\end_layout
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+Nigel Mall
+\begin_inset Flex Thanks
+status open
+
+\begin_layout Plain Layout
+e-mail: nigelmall@msn.com
+\end_layout
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+Grim, Inc.
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+and
+\end_layout
+
+\end_inset
+
+ Robert A.
+ Smith
+\begin_inset Flex Thanks
+status open
+
+\begin_layout Plain Layout
+e-mail: rsmith@gmail.com
+\end_layout
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+Smith Research
+\begin_inset Newline newline
+\end_inset
+
+Star Research
+\end_layout
+
+\begin_layout PDF author
+Roy Giv, Ed Grim, Nigel Mall, Robert A.
+ Smith
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+the authors of the work, comma-delimited, are added to the PDF metadata
\end_layout
\end_inset
\end_layout
+\begin_layout Keywords
+radiosity, global illumination, constant time
+\end_layout
+
\begin_layout Teaser
\begin_inset Graphics
filename ../examples/beamer-icsi-logo.pdf
\end_inset
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+Optional
+\end_layout
+
+\end_inset
+
\begin_inset Caption
\begin_inset Note Note
-status open
+status collapsed
\begin_layout Plain Layout
-The command
-\series bold
-
-\backslash
-maketitle
-\series default
- prepares and prints the title block.
+Uses the author and title information defined above, and prepares the formatted
+ title.
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-shortcite
-\end_layout
-
-\end_inset
-
-
-\begin_inset ERT
-status collapsed
+\begin_inset Flex ShortCite
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Jobs95
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\begin_layout Plain Layout
See
\begin_inset Flex URL
-status collapsed
+status open
\begin_layout Plain Layout
status open
\begin_layout Plain Layout
-K.6.1
-\begin_inset ERT
-status collapsed
+\begin_inset Argument 1
+status open
\begin_layout Plain Layout
-
-}
+K.6.1
\end_layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Argument 2
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Management of Computing and Information Systems
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Argument 3
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Project and People Management
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
-\end_layout
-
-\end_inset
-
-
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-{
\end_layout
\end_inset
status collapsed
\begin_layout Plain Layout
-The CR categories expects 4 infos that are separated by
-\begin_inset Quotes eld
-\end_inset
-
-
-\series bold
-}{
-\series default
+Consecutive categories must be in the same paragaph separated by a forced
+ linebreak.
+\end_layout
-\begin_inset Quotes erd
\end_inset
- in TeX code.
-\end_layout
+\begin_inset Newline newline
\end_inset
-\end_layout
-
-\begin_layout CR categories
\begin_inset Flex CRcat
status open
\begin_layout Plain Layout
-K.7.m
-\begin_inset ERT
-status collapsed
+\begin_inset Argument 1
+status open
\begin_layout Plain Layout
-
-}
+K.7.m
\end_layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Argument 2
+status open
\begin_layout Plain Layout
-
-{
+The Computing Profession
\end_layout
\end_inset
-The Computing Profession
-\begin_inset ERT
-status collapsed
-\begin_layout Plain Layout
+\begin_inset Argument 3
+status open
-}
+\begin_layout Plain Layout
+Miscellaneous
\end_layout
\end_inset
+Ethics
+\end_layout
-\begin_inset ERT
-status collapsed
+\end_inset
-\begin_layout Plain Layout
-{
\end_layout
-\end_inset
-
-Miscellaneous
+\begin_layout Standard
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+
+\backslash
+keywordlist
\end_layout
\end_inset
-\begin_inset ERT
+\begin_inset Note Note
status collapsed
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
-Ethics
+Prints out the keywords.
\end_layout
\end_inset
\backslash
-keywordlist
+TOGlinkslist
\end_layout
\end_inset
\begin_inset Note Note
-status open
+status collapsed
\begin_layout Plain Layout
-The command
-\series bold
-
-\backslash
-keywordlist
-\series default
- prints out the keywords.
+Adds hyperlinked icons to your document.
+ Has only an effect with the document class option
+\family sans
+annual.
\end_layout
\end_inset
\end_layout
-\begin_layout Section
-Introduction
-\end_layout
-
\begin_layout Standard
\begin_inset ERT
status collapsed
status collapsed
\begin_layout Plain Layout
-When you use a copyright note, the
-\series bold
-
-\backslash
-copyrightspace
-\series default
- command must be the first command after the start of the first section
- of the body of your paper.
- It ensures the copyright space is left at the bottom of the first column
- on the first page of your paper.
+Only necessary if you use a copyright note.
+ It ensures that the copyright space is left at the bottom of the first
+ column on the first page of your paper.
\end_layout
\end_inset
\end_layout
+\begin_layout Section
+Introduction
+\end_layout
+
\begin_layout Standard
bla
\end_layout
\end_inset
-
+
\end_layout
\end_body