#include "BufferView.h"
#include "funcrequest.h"
#include "lyxrc.h"
+#include "Lsstream.h"
#include "debug.h"
#include "bufferparams.h"
#include "buffer.h"
+#include "bufferview_funcs.h"
#include "ParagraphParameters.h"
#include "gettext.h"
+#include "factory.h"
#include "intl.h"
+#include "box.h"
+#include "language.h"
+#include "support/tostr.h"
#include "support/lstrings.h"
+#include "support/LAssert.h"
#include "frontends/LyXView.h"
-#include "frontends/WorkArea.h"
+#include "frontends/screen.h"
+#include "frontends/Dialogs.h"
#include "insets/insetspecialchar.h"
#include "insets/insettext.h"
+#include "insets/insetquotes.h"
+#include "insets/insetcommand.h"
+#include "insets/insetnewline.h"
+#include "undo_funcs.h"
+#include "text_funcs.h"
+#include "Lsstream.h"
+#include <ctime>
+#include <clocale>
+
+using namespace lyx::support;
+using namespace bv_funcs;
+
+using std::endl;
+using std::find;
+using std::vector;
+using lyx::pos_type;
extern string current_layout;
+extern int bibitemMaxWidth(BufferView *, LyXFont const &);
+
+// the selection possible is needed, that only motion events are
+// used, where the bottom press event was on the drawing area too
+bool selection_possible = false;
+
+
+namespace {
+
+ void moveCursorUpdate(BufferView * bv, bool selecting)
+ {
+ LyXText * lt = bv->getLyXText();
+
+ if (selecting || lt->selection.mark()) {
+ lt->setSelection();
+ if (lt->isInInset())
+ bv->updateInset(lt->inset_owner);
+ else
+ bv->repaint();
+ }
+ if (!lt->isInInset()) {
+ bv->update(lt, BufferView::SELECT);
+ } else if (bv->text->needRefresh()) {
+ bv->update(BufferView::SELECT);
+ }
+
+ if (!lt->selection.set())
+ bv->haveSelection(false);
+
+ bv->switchKeyMap();
+ }
+
+
+ void finishChange(BufferView * bv, bool selecting = false)
+ {
+ finishUndo();
+ moveCursorUpdate(bv, selecting);
+ bv->owner()->view_state_changed();
+ }
+
+ // check if the given co-ordinates are inside an inset at the
+ // given cursor, if one exists. If so, the inset is returned,
+ // and the co-ordinates are made relative. Otherwise, 0 is returned.
+InsetOld * checkInset(BufferView * /*bv*/, LyXText & text,
+ LyXCursor const & cur, int & x, int & y)
+ {
+ lyx::pos_type const pos = cur.pos();
+ ParagraphList::iterator par = cur.par();
+
+ if (pos >= par->size() || !par->isInset(pos))
+ return 0;
+
+ InsetOld /*const*/ * inset = par->getInset(pos);
+
+ if (!isEditableInset(inset))
+ return 0;
+
+ // get inset dimensions
+ Assert(par->getInset(pos));
+
+ LyXFont const & font = text.getFont(par, pos);
+
+ int const width = inset->width();
+ int const inset_x = font.isVisibleRightToLeft()
+ ? (cur.ix() - width) : cur.ix();
+
+ Box b(
+ inset_x + inset->scroll(),
+ inset_x + width,
+ cur.iy() - inset->ascent(),
+ cur.iy() + inset->descent()
+ );
+
+ if (!b.contained(x, y)) {
+ lyxerr[Debug::GUI] << "Missed inset at x,y "
+ << x << ',' << y
+ << " box " << b << endl;
+ return 0;
+ }
+
+ text.setCursor(par, pos, true);
+
+ x -= b.x1;
+ // The origin of an inset is on the baseline
+ y -= text.cursor.iy();
+
+ return inset;
+ }
+} // anon namespace
-void LyXText::update(BufferView * bv, bool changed)
+
+InsetOld * LyXText::checkInsetHit(int & x, int & y)
{
- BufferView::UpdateCodes c = BufferView::SELECT | BufferView::FITCUR;
- if (changed)
- bv->update(this, c | BufferView::CHANGE);
- else
- bv->update(this, c);
+ int y_tmp = y + top_y();
+
+ LyXCursor cur;
+ setCursorFromCoordinates(cur, x, y_tmp);
+
+ InsetOld * inset = checkInset(bv(), *this, cur, x, y_tmp);
+ if (inset) {
+ y = y_tmp;
+ return inset;
+ }
+
+ // look at previous position
+ if (cur.pos() == 0)
+ return 0;
+
+ // move back one
+ setCursor(cur, cur.par(), cur.pos() - 1, true);
+
+ inset = checkInset(bv(), *this, cur, x, y_tmp);
+ if (inset)
+ y = y_tmp;
+ return inset;
}
+bool LyXText::gotoNextInset(vector<InsetOld::Code> const & codes,
+ string const & contents)
+{
+ ParagraphList::iterator end = ownerParagraphs().end();
+ ParagraphList::iterator pit = cursor.par();
+ pos_type pos = cursor.pos();
+
+ InsetOld * inset;
+ do {
+ if (pos + 1 < pit->size()) {
+ ++pos;
+ } else {
+ ++pit;
+ pos = 0;
+ }
+
+ } while (pit != end &&
+ !(pit->isInset(pos) &&
+ (inset = pit->getInset(pos)) != 0 &&
+ find(codes.begin(), codes.end(), inset->lyxCode()) != codes.end() &&
+ (contents.empty() ||
+ static_cast<InsetCommand *>(pit->getInset(pos))->getContents()
+ == contents)));
+
+ if (pit != end) {
+ setCursor(pit, pos, false);
+ return true;
+ }
+ return false;
+}
+
+
+void LyXText::gotoInset(vector<InsetOld::Code> const & codes,
+ bool same_content)
+{
+ bv()->beforeChange(this);
+ update();
+
+ string contents;
+ if (same_content && cursor.pos() < cursor.par()->size()
+ && cursor.par()->isInset(cursor.pos())) {
+ InsetOld const * inset = cursor.par()->getInset(cursor.pos());
+ if (find(codes.begin(), codes.end(), inset->lyxCode())
+ != codes.end())
+ contents = static_cast<InsetCommand const *>(inset)->getContents();
+ }
+
+ if (!gotoNextInset(codes, contents)) {
+ if (cursor.pos() || cursor.par() != ownerParagraphs().begin()) {
+ LyXCursor tmp = cursor;
+ cursor.par(ownerParagraphs().begin());
+ cursor.pos(0);
+ if (!gotoNextInset(codes, contents)) {
+ cursor = tmp;
+ bv()->owner()->message(_("No more insets"));
+ }
+ } else {
+ bv()->owner()->message(_("No more insets"));
+ }
+ }
+ update();
+ selection.cursor = cursor;
+}
+
+
+void LyXText::gotoInset(InsetOld::Code code, bool same_content)
+{
+ gotoInset(vector<InsetOld::Code>(1, code), same_content);
+}
+
+
+void LyXText::cursorPrevious()
+{
+ int y = top_y();
+
+ if (cursorRow() == rows().begin()) {
+ if (y > 0)
+ bv()->updateScrollbar();
+ return;
+ }
+
+ RowList::iterator cursorrow = cursorRow();
+
+ setCursorFromCoordinates(cursor.x_fix(), y);
+ finishUndo();
+
+ int new_y;
+ if (cursorrow == bv()->text->cursorRow()) {
+ // we have a row which is taller than the workarea. The
+ // simplest solution is to move to the previous row instead.
+ cursorUp(true);
+ return;
+ // This is what we used to do, so we wouldn't skip right past
+ // tall rows, but it's not working right now.
+ } else {
+ if (inset_owner) {
+ new_y = bv()->text->cursor.iy()
+ + bv()->theLockingInset()->insetInInsetY() + y
+ + cursorRow()->height()
+ - bv()->workHeight() + 1;
+ } else {
+ new_y = cursor.y()
+ - cursorRow()->baseline()
+ + cursorRow()->height()
+ - bv()->workHeight() + 1;
+ }
+ }
+ //bv()->screen().draw(bv()->text, bv(), new_y < 0 ? 0 : new_y);
+ if (cursorRow() != rows().begin()) {
+ LyXCursor cur;
+ setCursor(cur, boost::prior(cursorRow())->par(),
+ boost::prior(cursorRow())->pos(), false);
+ if (cur.y() > top_y()) {
+ cursorUp(true);
+ }
+ }
+ bv()->updateScrollbar();
+}
+
+
+void LyXText::cursorNext()
+{
+ int topy = top_y();
+
+ if (boost::next(cursorRow()) == rows().end()) {
+ int y = cursor.y() - cursorRow()->baseline() +
+ cursorRow()->height();
+ if (y > topy + bv()->workHeight()) {
+ //bv()->screen().draw(bv()->text, bv(), bv()->text->top_y() + bv()->workHeight());
+ bv()->updateScrollbar();
+ }
+ return;
+ }
+
+ int y = topy + bv()->workHeight();
+ if (inset_owner && !topy) {
+ y -= (bv()->text->cursor.iy()
+ - bv()->text->top_y()
+ + bv()->theLockingInset()->insetInInsetY());
+ }
+
+ getRowNearY(y);
+
+ RowList::iterator cursorrow = cursorRow();
+ setCursorFromCoordinates(cursor.x_fix(), y);
+ // + bv->workHeight());
+ finishUndo();
+
+ int new_y;
+ if (cursorrow == bv()->text->cursorRow()) {
+ // we have a row which is taller than the workarea. The
+ // simplest solution is to move to the next row instead.
+ cursorDown(true);
+ return;
+ // This is what we used to do, so we wouldn't skip right past
+ // tall rows, but it's not working right now.
+#if 0
+ new_y = bv->text->top_y() + bv->workHeight();
+#endif
+ } else {
+ if (inset_owner) {
+ new_y = bv()->text->cursor.iy()
+ + bv()->theLockingInset()->insetInInsetY()
+ + y - cursorRow()->baseline();
+ } else {
+ new_y = cursor.y() - cursorRow()->baseline();
+ }
+ }
+ //bv()->screen().draw(bv()->text, bv(), new_y);
+
+ RowList::iterator next_row = boost::next(cursorRow());
+ if (next_row != rows().end()) {
+ LyXCursor cur;
+ setCursor(cur, next_row->par(), next_row->pos(), false);
+ if (cur.y() < top_y() + bv()->workHeight()) {
+ cursorDown(true);
+ }
+ }
+ bv()->updateScrollbar();
+}
+
+
+void LyXText::update()
+{
+ bv()->update(this, BufferView::SELECT);
+}
+
+namespace {
+
void specialChar(LyXText * lt, BufferView * bv, InsetSpecialChar::Kind kind)
{
- bv->hideCursor();
- lt->update(bv);
+ lt->update();
InsetSpecialChar * new_inset = new InsetSpecialChar(kind);
+ replaceSelection(lt);
if (!bv->insertInset(new_inset))
delete new_inset;
else
- bv->updateInset(new_inset, true);
+ bv->updateInset(new_inset);
}
-Inset::RESULT LyXText::dispatch(FuncRequest const & cmd)
+void doInsertInset(LyXText * lt, FuncRequest const & cmd,
+ bool edit, bool pastesel)
{
+ InsetOld * inset = createInset(cmd);
+ BufferView * bv = cmd.view();
+
+ if (inset) {
+ bool gotsel = false;
+ if (lt->selection.set()) {
+ bv->owner()->dispatch(FuncRequest(LFUN_CUT));
+ gotsel = true;
+ }
+ if (bv->insertInset(inset)) {
+ if (edit) {
+ FuncRequest cmd(bv, LFUN_INSET_EDIT, "left");
+ inset->localDispatch(cmd);
+ }
+ if (gotsel && pastesel)
+ bv->owner()->dispatch(FuncRequest(LFUN_PASTE));
+ }
+ else
+ delete inset;
+ }
+}
+
+}
+
+InsetOld::RESULT LyXText::dispatch(FuncRequest const & cmd)
+{
+ lyxerr[Debug::ACTION] << "LyXFunc::dispatch: action[" << cmd.action
+ <<"] arg[" << cmd.argument << ']' << endl;
+
BufferView * bv = cmd.view();
switch (cmd.action) {
case LFUN_APPENDIX: {
- Paragraph * par = cursor.par();
- bool start = !par->params().startOfAppendix();
+ ParagraphList::iterator pit = cursor.par();
+ bool start = !pit->params().startOfAppendix();
// ensure that we have only one start_of_appendix in this document
- Paragraph * tmp = ownerParagraph();
- for (; tmp; tmp = tmp->next())
- tmp->params().startOfAppendix(false);
+ ParagraphList::iterator tmp = ownerParagraphs().begin();
+ ParagraphList::iterator end = ownerParagraphs().end();
+
+ for (; tmp != end; ++tmp) {
+ if (tmp->params().startOfAppendix()) {
+ recordUndo(bv, Undo::ATOMIC, tmp);
+ tmp->params().startOfAppendix(false);
+ int tmpy;
+ setHeightOfRow(getRow(tmp, 0, tmpy));
+ break;
+ }
+ }
- par->params().startOfAppendix(start);
+ recordUndo(bv, Undo::ATOMIC, pit);
+ pit->params().startOfAppendix(start);
// we can set the refreshing parameters now
- status(cmd.view(), LyXText::NEED_MORE_REFRESH);
- refresh_y = 0;
- refresh_row = 0; // not needed for full update
- updateCounters(cmd.view());
- setCursor(cmd.view(), cursor.par(), cursor.pos());
- update(bv);
+ updateCounters();
+ redoHeightOfParagraph();
+ postPaint();
+ setCursor(cursor.par(), cursor.pos());
+ update();
break;
}
case LFUN_DELETE_WORD_FORWARD:
bv->beforeChange(this);
- update(bv, false);
- deleteWordForward(bv);
- update(bv);
- bv->finishChange();
+ update();
+ deleteWordForward();
+ update();
+ finishChange(bv);
break;
case LFUN_DELETE_WORD_BACKWARD:
bv->beforeChange(this);
- update(bv, false);
- deleteWordBackward(bv);
- update(bv, true);
- bv->finishChange();
+ update();
+ deleteWordBackward();
+ update();
+ finishChange(bv);
break;
case LFUN_DELETE_LINE_FORWARD:
bv->beforeChange(this);
- update(bv, false);
- deleteLineForward(bv);
- update(bv);
- bv->finishChange();
- break;
-
- case LFUN_SHIFT_TAB:
- case LFUN_TAB:
- if (!selection.mark())
- bv->beforeChange(this);
- update(bv, false);
- cursorTab(bv);
- bv->finishChange();
+ update();
+ deleteLineForward();
+ update();
+ finishChange(bv);
break;
- case LFUN_WORDRIGHT:
+ case LFUN_WORDRIGHT:
if (!selection.mark())
bv->beforeChange(this);
- update(bv, false);
+ update();
if (cursor.par()->isRightToLeftPar(bv->buffer()->params))
- cursorLeftOneWord(bv);
+ cursorLeftOneWord();
else
- cursorRightOneWord(bv);
- bv->finishChange();
+ cursorRightOneWord();
+ finishChange(bv);
break;
case LFUN_WORDLEFT:
if (!selection.mark())
bv->beforeChange(this);
- update(bv, false);
+ update();
if (cursor.par()->isRightToLeftPar(bv->buffer()->params))
- cursorRightOneWord(bv);
+ cursorRightOneWord();
else
- cursorLeftOneWord(bv);
- bv->finishChange();
+ cursorLeftOneWord();
+ finishChange(bv);
break;
case LFUN_BEGINNINGBUF:
if (!selection.mark())
bv->beforeChange(this);
- update(bv, false);
- cursorTop(bv);
- bv->finishChange();
+ update();
+ cursorTop();
+ finishChange(bv);
break;
case LFUN_ENDBUF:
if (selection.mark())
bv->beforeChange(this);
- update(bv, false);
- cursorBottom(bv);
- bv->finishChange();
+ update();
+ cursorBottom();
+ finishChange(bv);
break;
case LFUN_RIGHTSEL:
- update(bv, false);
+ update();
if (cursor.par()->isRightToLeftPar(bv->buffer()->params))
cursorLeft(bv);
else
cursorRight(bv);
- bv->finishChange(true);
+ finishChange(bv, true);
break;
case LFUN_LEFTSEL:
- update(bv, false);
+ update();
if (cursor.par()->isRightToLeftPar(bv->buffer()->params))
cursorRight(bv);
else
cursorLeft(bv);
- bv->finishChange(true);
+ finishChange(bv, true);
break;
case LFUN_UPSEL:
- update(bv, false);
- cursorUp(bv, true);
- bv->finishChange(true);
+ update();
+ cursorUp(true);
+ finishChange(bv, true);
break;
case LFUN_DOWNSEL:
- update(bv, false);
- cursorDown(bv, true);
- bv->finishChange(true);
+ update();
+ cursorDown(true);
+ finishChange(bv, true);
break;
case LFUN_UP_PARAGRAPHSEL:
- update(bv, false);
- cursorUpParagraph(bv);
- bv->finishChange(true);
+ update();
+ cursorUpParagraph();
+ finishChange(bv, true);
break;
case LFUN_DOWN_PARAGRAPHSEL:
- update(bv, false);
- cursorDownParagraph(bv);
- bv->finishChange(true);
+ update();
+ cursorDownParagraph();
+ finishChange(bv, true);
break;
case LFUN_PRIORSEL:
- update(bv, false);
- bv->cursorPrevious(this);
- bv->finishChange(true);
+ update();
+ cursorPrevious();
+ finishChange(bv, true);
break;
case LFUN_NEXTSEL:
- update(bv, false);
- bv->cursorNext(this);
- bv->finishChange();
+ update();
+ cursorNext();
+ finishChange(bv, true);
break;
case LFUN_HOMESEL:
- update(bv, false);
- cursorHome(bv);
- bv->finishChange(true);
+ update();
+ cursorHome();
+ finishChange(bv, true);
break;
case LFUN_ENDSEL:
- update(bv, false);
- cursorEnd(bv);
- bv->finishChange(true);
+ update();
+ cursorEnd();
+ finishChange(bv, true);
break;
case LFUN_WORDRIGHTSEL:
- update(bv, false);
+ update();
if (cursor.par()->isRightToLeftPar(bv->buffer()->params))
- cursorLeftOneWord(bv);
+ cursorLeftOneWord();
else
- cursorRightOneWord(bv);
- bv->finishChange(true);
+ cursorRightOneWord();
+ finishChange(bv, true);
break;
case LFUN_WORDLEFTSEL:
- update(bv, false);
+ update();
if (cursor.par()->isRightToLeftPar(bv->buffer()->params))
- cursorRightOneWord(bv);
+ cursorRightOneWord();
else
- cursorLeftOneWord(bv);
- bv->finishChange(true);
+ cursorLeftOneWord();
+ finishChange(bv, true);
+ break;
+
+ case LFUN_WORDSEL: {
+ update();
+ LyXCursor cur1 = cursor;
+ LyXCursor cur2;
+ ::getWord(cur1, cur2, lyx::WHOLE_WORD, ownerParagraphs());
+ setCursor(cur1.par(), cur1.pos());
+ bv->beforeChange(this);
+ setCursor(cur2.par(), cur2.pos());
+ finishChange(bv, true);
break;
+ }
case LFUN_RIGHT: {
bool is_rtl = cursor.par()->isRightToLeftPar(bv->buffer()->params);
if (!selection.mark())
bv->beforeChange(this);
- update(bv);
+ update();
if (is_rtl)
- cursorLeft(bv, false);
+ cursorLeft(false);
if (cursor.pos() < cursor.par()->size()
&& cursor.par()->isInset(cursor.pos())
&& isHighlyEditableInset(cursor.par()->getInset(cursor.pos()))) {
- Inset * tmpinset = cursor.par()->getInset(cursor.pos());
+ InsetOld * tmpinset = cursor.par()->getInset(cursor.pos());
cmd.message(tmpinset->editMessage());
- tmpinset->edit(bv, !is_rtl);
+ FuncRequest cmd1(bv, LFUN_INSET_EDIT, is_rtl ? "right" : "left");
+ tmpinset->localDispatch(cmd1);
break;
}
if (!is_rtl)
- cursorRight(bv, false);
- bv->finishChange(false);
+ cursorRight(false);
+ finishChange(bv);
break;
}
bool const is_rtl = cursor.par()->isRightToLeftPar(bv->buffer()->params);
if (!selection.mark())
bv->beforeChange(this);
- update(bv);
+ update();
LyXCursor const cur = cursor;
if (!is_rtl)
- cursorLeft(bv, false);
+ cursorLeft(false);
if ((is_rtl || cur != cursor) && // only if really moved!
cursor.pos() < cursor.par()->size() &&
cursor.par()->isInset(cursor.pos()) &&
isHighlyEditableInset(cursor.par()->getInset(cursor.pos()))) {
- Inset * tmpinset = cursor.par()->getInset(cursor.pos());
+ InsetOld * tmpinset = cursor.par()->getInset(cursor.pos());
cmd.message(tmpinset->editMessage());
- tmpinset->edit(bv, is_rtl);
+ FuncRequest cmd1(bv, LFUN_INSET_EDIT, is_rtl ? "left" : "right");
+ tmpinset->localDispatch(cmd1);
break;
}
if (is_rtl)
- cursorRight(bv, false);
- bv->finishChange(false);
+ cursorRight(false);
+ finishChange(bv);
break;
}
if (!selection.mark())
bv->beforeChange(this);
bv->update(this, BufferView::UPDATE);
- cursorUp(bv);
- bv->finishChange(false);
+ cursorUp(false);
+ finishChange(bv);
break;
case LFUN_DOWN:
if (!selection.mark())
bv->beforeChange(this);
bv->update(this, BufferView::UPDATE);
- cursorDown(bv);
- bv->finishChange();
+ cursorDown(false);
+ finishChange(bv);
break;
case LFUN_UP_PARAGRAPH:
if (!selection.mark())
bv->beforeChange(this);
bv->update(this, BufferView::UPDATE);
- cursorUpParagraph(bv);
- bv->finishChange();
+ cursorUpParagraph();
+ finishChange(bv);
break;
case LFUN_DOWN_PARAGRAPH:
if (!selection.mark())
bv->beforeChange(this);
bv->update(this, BufferView::UPDATE);
- cursorDownParagraph(bv);
- bv->finishChange(false);
+ cursorDownParagraph();
+ finishChange(bv, false);
break;
case LFUN_PRIOR:
if (!selection.mark())
bv->beforeChange(this);
bv->update(this, BufferView::UPDATE);
- bv->cursorPrevious(this);
- bv->finishChange(false);
- // was:
- // finishUndo();
- // moveCursorUpdate(false, false);
- // owner_->view_state_changed();
+ cursorPrevious();
+ finishChange(bv, false);
break;
case LFUN_NEXT:
if (!selection.mark())
bv->beforeChange(this);
bv->update(this, BufferView::UPDATE);
- bv->cursorNext(this);
- bv->finishChange(false);
+ cursorNext();
+ finishChange(bv, false);
break;
case LFUN_HOME:
if (!selection.mark())
bv->beforeChange(this);
- update(bv);
- cursorHome(bv);
- bv->finishChange(false);
+ update();
+ cursorHome();
+ finishChange(bv, false);
break;
case LFUN_END:
if (!selection.mark())
bv->beforeChange(this);
- update(bv);
- cursorEnd(bv);
- bv->finishChange(false);
+ update();
+ cursorEnd();
+ finishChange(bv, false);
break;
- case LFUN_BREAKLINE:
- bv->beforeChange(this);
- insertChar(bv, Paragraph::META_NEWLINE);
- update(bv, true);
- setCursor(bv, cursor.par(), cursor.pos());
- bv->moveCursorUpdate(false);
+ case LFUN_BREAKLINE: {
+ lyx::pos_type body = cursor.par()->beginningOfBody();
+
+ // Not allowed by LaTeX (labels or empty par)
+ if (cursor.pos() <= body)
+ break;
+
+ replaceSelection(bv->getLyXText());
+ insertInset(new InsetNewline);
+ update();
+ setCursor(cursor.par(), cursor.pos());
+ moveCursorUpdate(bv, false);
break;
+ }
case LFUN_DELETE:
if (!selection.set()) {
- Delete(bv);
+ Delete();
selection.cursor = cursor;
- update(bv);
+ update();
// It is possible to make it a lot faster still
// just comment out the line below...
- bv->showCursor();
} else {
- bv->cut(false);
+ update();
+ cutSelection(true, false);
+ update();
}
- bv->moveCursorUpdate(false);
+ moveCursorUpdate(bv, false);
bv->owner()->view_state_changed();
bv->switchKeyMap();
break;
if (cur.pos() == 0
&& !(cur.par()->params().spaceTop()
== VSpace (VSpace::NONE))) {
- setParagraph(bv,
+ setParagraph(
cur.par()->params().lineTop(),
cur.par()->params().lineBottom(),
cur.par()->params().pagebreakTop(),
cur.par()->params().align(),
cur.par()->params().labelWidthString(), 0);
cursorLeft(bv);
- update(bv);
+ update();
} else {
cursorLeft(bv);
- Delete(bv);
+ Delete();
selection.cursor = cursor;
- update(bv);
}
} else {
- Delete(bv);
+ Delete();
selection.cursor = cursor;
- update(bv);
}
- } else
- bv->cut(false);
+ } else {
+ update();
+ cutSelection(true, false);
+ }
+ update();
break;
case LFUN_BACKSPACE:
if (!selection.set()) {
if (bv->owner()->getIntl().getTransManager().backspace()) {
- backspace(bv);
+ backspace();
selection.cursor = cursor;
- update(bv);
+ update();
// It is possible to make it a lot faster still
// just comment out the line below...
- bv->showCursor();
}
- } else
- bv->cut(false);
+ } else {
+ update();
+ cutSelection(true, false);
+ update();
+ }
bv->owner()->view_state_changed();
bv->switchKeyMap();
break;
if (cur.pos() == 0
&& !(cur.par()->params().spaceTop()
== VSpace (VSpace::NONE))) {
- setParagraph(bv,
+ setParagraph(
cur.par()->params().lineTop(),
cur.par()->params().lineBottom(),
cur.par()->params().pagebreakTop(),
cur.par()->params().spacing(),
cur.par()->params().align(),
cur.par()->params().labelWidthString(), 0);
- update(bv);
} else {
- backspace(bv);
+ backspace();
selection.cursor = cur;
- update(bv);
}
- } else
- bv->cut(false);
+ } else {
+ update();
+ cutSelection(true, false);
+ }
+ update();
break;
case LFUN_BREAKPARAGRAPH:
- bv->beforeChange(this);
- breakParagraph(bv, 0);
- update(bv);
+ replaceSelection(bv->getLyXText());
+ breakParagraph(bv->buffer()->paragraphs, 0);
+ update();
selection.cursor = cursor;
bv->switchKeyMap();
bv->owner()->view_state_changed();
break;
case LFUN_BREAKPARAGRAPHKEEPLAYOUT:
- bv->beforeChange(this);
- breakParagraph(bv, 1);
- update(bv);
+ replaceSelection(bv->getLyXText());
+ breakParagraph(bv->buffer()->paragraphs, 1);
+ update();
selection.cursor = cursor;
bv->switchKeyMap();
bv->owner()->view_state_changed();
// indentation and add a "defskip" at the top.
// Otherwise, do the same as LFUN_BREAKPARAGRAPH.
LyXCursor cur = cursor;
- bv->beforeChange(this);
+ replaceSelection(bv->getLyXText());
if (cur.pos() == 0) {
if (cur.par()->params().spaceTop() == VSpace(VSpace::NONE)) {
- setParagraph(bv,
+ setParagraph(
cur.par()->params().lineTop(),
cur.par()->params().lineBottom(),
cur.par()->params().pagebreakTop(),
cur.par()->params().spacing(),
cur.par()->params().align(),
cur.par()->params().labelWidthString(), 1);
- //update(bv);
}
}
else {
- breakParagraph(bv, 0);
- //update(bv);
+ breakParagraph(bv->buffer()->paragraphs, 0);
}
- update(bv);
+ update();
selection.cursor = cur;
bv->switchKeyMap();
bv->owner()->view_state_changed();
}
case LFUN_PARAGRAPH_SPACING: {
- Paragraph * par = cursor.par();
- Spacing::Space cur_spacing = par->params().spacing().getSpace();
+ ParagraphList::iterator pit = cursor.par();
+ Spacing::Space cur_spacing = pit->params().spacing().getSpace();
float cur_value = 1.0;
if (cur_spacing == Spacing::Other)
- cur_value = par->params().spacing().getValue();
+ cur_value = pit->params().spacing().getValue();
- istringstream is(cmd.argument.c_str());
+ istringstream is(STRCONV(cmd.argument));
string tmp;
is >> tmp;
Spacing::Space new_spacing = cur_spacing;
<< cmd.argument << endl;
}
if (cur_spacing != new_spacing || cur_value != new_value) {
- par->params().spacing(Spacing(new_spacing, new_value));
- redoParagraph(bv);
- update(bv);
+ pit->params().spacing(Spacing(new_spacing, new_value));
+ redoParagraph();
+ update();
}
break;
}
+ case LFUN_INSET_SETTINGS:
+ Assert(bv->theLockingInset());
+ bv->theLockingInset()->getLockingInset()->showInsetDialog(bv);
+ break;
+
case LFUN_INSET_TOGGLE:
- bv->hideCursor();
bv->beforeChange(this);
- update(bv, false);
- toggleInset(bv);
- update(bv, false);
+ update();
+ toggleInset();
+ update();
bv->switchKeyMap();
break;
- case LFUN_PROTECTEDSPACE:
+ case LFUN_SPACE_INSERT:
if (cursor.par()->layout()->free_spacing) {
- insertChar(bv, ' ');
- update(bv);
+ insertChar(' ');
+ update();
} else {
- specialChar(this, bv, InsetSpecialChar::PROTECTED_SEPARATOR);
+ doInsertInset(this, cmd, false, false);
}
- bv->moveCursorUpdate(false);
+ moveCursorUpdate(bv, false);
break;
case LFUN_HYPHENATION:
specialChar(this, bv, InsetSpecialChar::LDOTS);
break;
- case LFUN_HFILL:
- bv->hideCursor();
- update(bv, false);
- insertChar(bv, Paragraph::META_HFILL);
- update(bv);
- break;
-
case LFUN_END_OF_SENTENCE:
specialChar(this, bv, InsetSpecialChar::END_OF_SENTENCE);
break;
case LFUN_MARK_OFF:
bv->beforeChange(this);
- update(bv, false);
+ update();
selection.cursor = cursor;
cmd.message(N_("Mark off"));
break;
case LFUN_MARK_ON:
bv->beforeChange(this);
selection.mark(true);
- update(bv, false);
+ update();
selection.cursor = cursor;
cmd.message(N_("Mark on"));
break;
case LFUN_SETMARK:
bv->beforeChange(this);
if (selection.mark()) {
- update(bv);
+ update();
cmd.message(N_("Mark removed"));
} else {
selection.mark(true);
- update(bv);
+ update();
cmd.message(N_("Mark set"));
}
selection.cursor = cursor;
break;
case LFUN_UPCASE_WORD:
- update(bv, false);
- changeCase(bv, LyXText::text_uppercase);
+ update();
+ changeCase(LyXText::text_uppercase);
if (inset_owner)
- bv->updateInset(inset_owner, true);
- update(bv);
+ bv->updateInset(inset_owner);
+ update();
break;
case LFUN_LOWCASE_WORD:
- update(bv, false);
- changeCase(bv, LyXText::text_lowercase);
+ update();
+ changeCase(LyXText::text_lowercase);
if (inset_owner)
- bv->updateInset(inset_owner, true);
- update(bv);
+ bv->updateInset(inset_owner);
+ update();
break;
case LFUN_CAPITALIZE_WORD:
- update(bv, false);
- changeCase(bv, LyXText::text_capitalization);
+ update();
+ changeCase(LyXText::text_capitalization);
if (inset_owner)
- bv->updateInset(inset_owner, true);
- update(bv);
+ bv->updateInset(inset_owner);
+ update();
break;
case LFUN_TRANSPOSE_CHARS:
- update(bv, false);
- transposeChars(*bv);
+ update();
+ recordUndo(bv, Undo::ATOMIC, cursor.par());
+ if (transposeChars(cursor))
+ checkParagraph(cursor.par(), cursor.pos());
if (inset_owner)
- bv->updateInset(inset_owner, true);
- update(bv);
+ bv->updateInset(inset_owner);
+ update();
+ break;
+
+ case LFUN_PASTE: {
+ cmd.message(_("Paste"));
+ replaceSelection(bv->getLyXText());
+ size_t sel_index = 0;
+ string const & arg = cmd.argument;
+ if (isStrUnsignedInt(arg)) {
+ size_t const paste_arg = strToUnsignedInt(arg);
+#warning FIXME Check if the arg is in the domain of available selections.
+ sel_index = paste_arg;
+ }
+ pasteSelection(sel_index);
+ clearSelection(); // bug 393
+ update();
+ bv->switchKeyMap();
+ break;
+ }
+
+ case LFUN_CUT:
+ update();
+ cutSelection(true, true);
+ update();
+ cmd.message(_("Cut"));
+ break;
+
+ case LFUN_COPY:
+ copySelection();
+ cmd.message(_("Copy"));
break;
case LFUN_BEGINNINGBUFSEL:
if (inset_owner)
- return Inset::UNDISPATCHED;
- update(bv, false);
- cursorTop(bv);
- bv->finishChange(true);
+ return UNDISPATCHED;
+ update();
+ cursorTop();
+ finishChange(bv, true);
break;
case LFUN_ENDBUFSEL:
if (inset_owner)
- return Inset::UNDISPATCHED;
- update(bv, false);
- cursorBottom(bv);
- bv->finishChange(true);
+ return UNDISPATCHED;
+ update();
+ cursorBottom();
+ finishChange(bv, true);
break;
case LFUN_GETXY:
case LFUN_SETXY: {
int x = 0;
int y = 0;
- if (::sscanf(cmd.argument.c_str(), " %d %d", &x, &y) != 2)
+ istringstream is(STRCONV(cmd.argument));
+ is >> x >> y;
+ if (!is)
lyxerr << "SETXY: Could not parse coordinates in '"
<< cmd.argument << std::endl;
- setCursorFromCoordinates(bv, x, y);
+ else
+ setCursorFromCoordinates(x, y);
break;
}
}
bool change_layout = (current_layout != layout);
+
if (!change_layout && selection.set() &&
selection.start.par() != selection.end.par())
{
- Paragraph * spar = selection.start.par();
- Paragraph * epar = selection.end.par()->next();
- while (spar != epar) {
- if (spar->layout()->name() != current_layout) {
+ ParagraphList::iterator spit = selection.start.par();
+ ParagraphList::iterator epit = boost::next(selection.end.par());
+ while (spit != epit) {
+ if (spit->layout()->name() != current_layout) {
change_layout = true;
break;
}
+ ++spit;
}
}
+
if (change_layout) {
- bv->hideCursor();
current_layout = layout;
- update(bv, false);
- setLayout(bv, layout);
+ update();
+ setLayout(layout);
bv->owner()->setLayout(layout);
- update(bv);
+ update();
bv->switchKeyMap();
}
break;
case LFUN_PASTESELECTION: {
if (!bv->buffer())
break;
- bv->hideCursor();
// this was originally a beforeChange(bv->text), i.e
// the outermost LyXText!
bv->beforeChange(this);
- string const clip(bv->workarea().getClipboard());
+ string const clip = bv->getClipboard();
if (!clip.empty()) {
if (cmd.argument == "paragraph")
- insertStringAsParagraphs(bv, clip);
- else
- insertStringAsLines(bv, clip);
+ insertStringAsParagraphs(clip);
+ else
+ insertStringAsLines(clip);
clearSelection();
- update(bv);
+ update();
+ }
+ break;
+ }
+
+ case LFUN_GOTOERROR:
+ gotoInset(InsetOld::ERROR_CODE, false);
+ break;
+
+ case LFUN_GOTONOTE:
+ gotoInset(InsetOld::NOTE_CODE, false);
+ break;
+
+ case LFUN_REFERENCE_GOTO:
+ {
+ vector<InsetOld::Code> tmp;
+ tmp.push_back(InsetOld::LABEL_CODE);
+ tmp.push_back(InsetOld::REF_CODE);
+ gotoInset(tmp, true);
+ break;
+ }
+
+ case LFUN_QUOTE: {
+ replaceSelection(bv->getLyXText());
+ ParagraphList::iterator pit = cursor.par();
+ lyx::pos_type pos = cursor.pos();
+ char c;
+ if (!pos)
+ c = ' ';
+ else if (pit->isInset(pos - 1) && pit->getInset(pos - 1)->isSpace())
+ c = ' ';
+ else
+ c = pit->getChar(pos - 1);
+
+ LyXLayout_ptr const & style = pit->layout();
+
+ if (style->pass_thru ||
+ pit->getFontSettings(bv->buffer()->params,
+ pos).language()->lang() == "hebrew" ||
+ (!bv->insertInset(new InsetQuotes(c, bv->buffer()->params))))
+ bv->owner()->dispatch(FuncRequest(LFUN_SELFINSERT, "\""));
+ break;
+ }
+
+ case LFUN_DATE_INSERT: {
+ replaceSelection(bv->getLyXText());
+ time_t now_time_t = time(NULL);
+ struct tm * now_tm = localtime(&now_time_t);
+ setlocale(LC_TIME, "");
+ string arg;
+ if (!cmd.argument.empty())
+ arg = cmd.argument;
+ else
+ arg = lyxrc.date_insert_format;
+ char datetmp[32];
+ int const datetmp_len =
+ ::strftime(datetmp, 32, arg.c_str(), now_tm);
+
+ for (int i = 0; i < datetmp_len; i++) {
+ insertChar(datetmp[i]);
+ update();
}
+ selection.cursor = cursor;
+ moveCursorUpdate(bv, false);
+ break;
+ }
+
+ case LFUN_MOUSE_TRIPLE:
+ if (!bv->buffer())
+ break;
+ if (!isInInset() && bv->theLockingInset())
+ break;
+ if (cmd.button() == mouse_button::button1) {
+ if (!isInInset()) {
+ bv->screen().toggleSelection(this, bv);
+ }
+ cursorHome();
+ selection.cursor = cursor;
+ cursorEnd();
+ setSelection();
+ if (!isInInset())
+ bv->screen().toggleSelection(this, bv, false);
+ update();
+ bv->haveSelection(selection.set());
+ }
+ break;
+
+ case LFUN_MOUSE_DOUBLE:
+ if (!bv->buffer())
+ break;
+ if (!isInInset() && bv->theLockingInset())
+ break;
+ if (cmd.button() == mouse_button::button1) {
+ if (!isInInset()) {
+ bv->screen().toggleSelection(this, bv);
+ selectWord(lyx::WHOLE_WORD_STRICT);
+ bv->screen().toggleSelection(this, bv, false);
+ } else {
+ selectWord(lyx::WHOLE_WORD_STRICT);
+ }
+ update();
+ bv->haveSelection(selection.set());
+ }
+ break;
+
+ case LFUN_MOUSE_MOTION:
+ {
+ // Only use motion with button 1
+ //if (ev.button() != mouse_button::button1)
+ // return false;
+
+ if (!bv->buffer())
+ break;
+
+ // Check for inset locking
+ if (bv->theLockingInset()) {
+ InsetOld * tli = bv->theLockingInset();
+ LyXCursor cursor = bv->text->cursor;
+ LyXFont font = bv->text->getFont(cursor.par(), cursor.pos());
+ int width = tli->width();
+ int inset_x = font.isVisibleRightToLeft()
+ ? cursor.ix() - width : cursor.ix();
+ int start_x = inset_x + tli->scroll();
+ FuncRequest cmd1 = cmd;
+ cmd1.x = cmd.x - start_x;
+ cmd1.y = cmd.y - cursor.iy() + bv->text->top_y();
+ tli->localDispatch(cmd1);
+ break;
+ }
+
+ // The test for not selection possible is needed, that only motion
+ // events are used, where the bottom press event was on
+ // the drawing area too
+ if (!selection_possible) {
+ lyxerr[Debug::ACTION]
+ << "BufferView::Pimpl::Dispatch: no selection possible\n";
+ break;
+ }
+
+ RowList::iterator cursorrow = bv->text->cursorRow();
+ bv->text->setCursorFromCoordinates(cmd.x, cmd.y + bv->text->top_y());
+ #if 0
+ // sorry for this but I have a strange error that the y value jumps at
+ // a certain point. This seems like an error in my xforms library or
+ // in some other local environment, but I would like to leave this here
+ // for the moment until I can remove this (Jug 20020418)
+ if (y_before < bv->text->cursor.y())
+ lyxerr << y_before << ':'
+ << bv->text->cursor.y() << endl;
+ #endif
+ // This is to allow jumping over large insets
+ if (cursorrow == bv->text->cursorRow()) {
+ if (cmd.y >= bv->workHeight())
+ bv->text->cursorDown(false);
+ else if (cmd.y < 0)
+ bv->text->cursorUp(false);
+ }
+
+ // Maybe an empty line was deleted
+ if (!bv->text->selection.set())
+ bv->update(BufferView::UPDATE);
+ bv->text->setSelection();
+ bv->repaint();
+ bv->fitCursor();
+ break;
+ }
+
+ // Single-click on work area
+ case LFUN_MOUSE_PRESS:
+ {
+ if (!bv->buffer())
+ break;
+
+ // ok ok, this is a hack (for xforms)
+ // We shouldn't go further down as we really should only do the
+ // scrolling and be done with this. Otherwise we may open some
+ // dialogs (Jug 20020424).
+ if (cmd.button() == mouse_button::button4) {
+ bv->scroll(-lyxrc.wheel_jump);
+ break;
+ }
+ if (cmd.button() == mouse_button::button5) {
+ bv->scroll(lyxrc.wheel_jump);
+ break;
+ }
+
+ int x = cmd.x;
+ int y = cmd.y;
+ InsetOld * inset_hit = bv->text->checkInsetHit(x, y);
+
+ // Middle button press pastes if we have a selection
+ // We do this here as if the selection was inside an inset
+ // it could get cleared on the unlocking of the inset so
+ // we have to check this first
+ bool paste_internally = false;
+ if (cmd.button() == mouse_button::button2 && selection.set()) {
+ bv->owner()->dispatch(FuncRequest(LFUN_COPY));
+ paste_internally = true;
+ }
+
+ int const screen_first = bv->text->top_y();
+
+ if (bv->theLockingInset()) {
+ // We are in inset locking mode
+
+ // Check whether the inset was hit. If not reset mode,
+ // otherwise give the event to the inset
+ if (inset_hit == bv->theLockingInset()) {
+ FuncRequest cmd1(bv, LFUN_MOUSE_PRESS, x, y, cmd.button());
+ bv->theLockingInset()->localDispatch(cmd1);
+ break;
+ }
+ bv->unlockInset(bv->theLockingInset());
+ }
+
+ if (!inset_hit)
+ selection_possible = true;
+
+ // Clear the selection
+ bv->screen().toggleSelection(bv->text, bv);
+ bv->text->clearSelection();
+ bv->text->partialRebreak();
+ bv->update();
+ bv->updateScrollbar();
+
+ // Single left click in math inset?
+ if (isHighlyEditableInset(inset_hit)) {
+ // Highly editable inset, like math
+ UpdatableInset * inset = static_cast<UpdatableInset *>(inset_hit);
+ selection_possible = false;
+ bv->owner()->message(inset->editMessage());
+ // We just have to lock the inset before calling a PressEvent on it!
+ if (!bv->lockInset(inset))
+ lyxerr[Debug::INSETS] << "Cannot lock inset" << endl;
+ FuncRequest cmd1(bv, LFUN_MOUSE_PRESS, x, y, cmd.button());
+ inset->localDispatch(cmd1);
+ break;
+ }
+ // I'm not sure we should continue here if we hit an inset (Jug20020403)
+
+ // Right click on a footnote flag opens float menu
+ if (cmd.button() == mouse_button::button3) {
+ selection_possible = false;
+ break;
+ }
+
+ if (!inset_hit) // otherwise it was already set in checkInsetHit(...)
+ bv->text->setCursorFromCoordinates(x, y + screen_first);
+ finishUndo();
+ bv->text->selection.cursor = bv->text->cursor;
+ bv->text->cursor.x_fix(bv->text->cursor.x());
+
+ if (bv->fitCursor())
+ selection_possible = false;
+
+ // Insert primary selection with middle mouse
+ // if there is a local selection in the current buffer,
+ // insert this
+ if (cmd.button() == mouse_button::button2) {
+ if (paste_internally)
+ bv->owner()->dispatch(FuncRequest(LFUN_PASTE));
+ else
+ bv->owner()->dispatch(FuncRequest(LFUN_PASTESELECTION, "paragraph"));
+ selection_possible = false;
+ }
+ break;
+ }
+
+ case LFUN_MOUSE_RELEASE:
+ {
+ // do nothing if we used the mouse wheel
+ if (!bv->buffer())
+ break;
+
+ if (cmd.button() == mouse_button::button4
+ || cmd.button() == mouse_button::button5)
+ break;
+
+ // If we hit an inset, we have the inset coordinates in these
+ // and inset_hit points to the inset. If we do not hit an
+ // inset, inset_hit is 0, and inset_x == x, inset_y == y.
+ int x = cmd.x;
+ int y = cmd.y;
+ InsetOld * inset_hit = bv->text->checkInsetHit(x, y);
+
+ if (bv->theLockingInset()) {
+ // We are in inset locking mode.
+
+ // LyX does a kind of work-area grabbing for insets.
+ // Only a ButtonPress FuncRequest outside the inset will
+ // force a insetUnlock.
+ FuncRequest cmd1(bv, LFUN_MOUSE_RELEASE, x, y, cmd.button());
+ bv->theLockingInset()->localDispatch(cmd1);
+ break;
+ }
+
+ selection_possible = false;
+
+ if (cmd.button() == mouse_button::button2)
+ break;
+
+ // finish selection
+ if (cmd.button() == mouse_button::button1)
+ bv->haveSelection(selection.set());
+
+ bv->switchKeyMap();
+ bv->owner()->view_state_changed();
+ bv->owner()->updateMenubar();
+ bv->owner()->updateToolbar();
+
+ // Did we hit an editable inset?
+ if (inset_hit) {
+ selection_possible = false;
+
+ // if we reach this point with a selection, it
+ // must mean we are currently selecting.
+ // But we don't want to open the inset
+ // because that is annoying for the user.
+ // So just pretend we didn't hit it.
+ // this is OK because a "kosher" ButtonRelease
+ // will follow a ButtonPress that clears
+ // the selection.
+ // Note this also fixes selection drawing
+ // problems if we end up opening an inset
+ if (selection.set())
+ break;
+
+ // CHECK fix this proper in 0.13
+ // well, maybe 13.0 !!!!!!!!!
+
+ // Following a ref shouldn't issue
+ // a push on the undo-stack
+ // anylonger, now that we have
+ // keybindings for following
+ // references and returning from
+ // references. IMHO though, it
+ // should be the inset's own business
+ // to push or not push on the undo
+ // stack. They don't *have* to
+ // alter the document...
+ // (Joacim)
+ // ...or maybe the SetCursorParUndo()
+ // below isn't necessary at all anylonger?
+ if (inset_hit->lyxCode() == InsetOld::REF_CODE)
+ recordUndo(bv, Undo::ATOMIC);
+
+ bv->owner()->message(inset_hit->editMessage());
+
+ FuncRequest cmd1(bv, LFUN_MOUSE_RELEASE, x, y, cmd.button());
+ inset_hit->localDispatch(cmd1);
+ }
+
break;
}
if (lyxrc.auto_region_delete) {
if (selection.set()) {
- cutSelection(bv, false, false);
- update(bv);
+ cutSelection(false, false);
+ update();
}
- bv->workarea().haveSelection(false);
+ bv->haveSelection(false);
}
bv->beforeChange(this);
bv->owner()->getIntl().getTransManager().
TranslateAndInsert(*cit, this);
- update(bv);
+ update();
selection.cursor = cursor;
- bv->moveCursorUpdate(false);
+ moveCursorUpdate(bv, false);
// real_current_font.number can change so we need to
// update the minibuffer
break;
}
+ case LFUN_HTMLURL: {
+ InsetCommandParams p("htmlurl");
+ string const data = InsetCommandMailer::params2string("url", p);
+ bv->owner()->getDialogs().show("url", data, 0);
+ break;
+ }
+
+ case LFUN_URL: {
+ InsetCommandParams p("url");
+ string const data = InsetCommandMailer::params2string("url", p);
+ bv->owner()->getDialogs().show("url", data, 0);
+ break;
+ }
+
+
+#if 0
+ case LFUN_INSET_LIST:
+ case LFUN_INSET_THEOREM:
+ case LFUN_INSET_CAPTION:
+#endif
+ case LFUN_INSERT_NOTE:
+ case LFUN_INSERT_BIBITEM:
+ case LFUN_INSET_ERT:
+ case LFUN_INSET_FLOAT:
+ case LFUN_INSET_FOOTNOTE:
+ case LFUN_INSET_MARGINAL:
+ case LFUN_INSET_MINIPAGE:
+ case LFUN_INSET_OPTARG:
+ case LFUN_INSET_WIDE_FLOAT:
+ case LFUN_INSET_WRAP:
+ case LFUN_TABULAR_INSERT:
+ case LFUN_ENVIRONMENT_INSERT:
+ // Open the inset, and move the current selection
+ // inside it.
+ doInsertInset(this, cmd, true, true);
+ break;
+
+ case LFUN_INDEX_INSERT:
+ // Just open the inset
+ doInsertInset(this, cmd, true, false);
+ break;
+
+ case LFUN_INDEX_PRINT:
+ case LFUN_TOC_INSERT:
+ case LFUN_HFILL:
+ // do nothing fancy
+ doInsertInset(this, cmd, false, false);
+ break;
+
default:
- return Inset::UNDISPATCHED;
+ return UNDISPATCHED;
}
- return Inset::DISPATCHED;
+ return DISPATCHED;
}
projects / lyx.git / blobdiff