* LyX, The Document Processor
*
* Copyright 1995 Matthias Ettrich
- * Copyright 1995-2000 The LyX Team.
+ * Copyright 1995-2001 The LyX Team.
*
* ====================================================== */
#include <config.h>
-#include FORMS_H_LOCATION
-
-
#ifdef __GNUG__
#pragma implementation "lyxtext.h"
#endif
#include "lyxtext.h"
#include "LString.h"
-#include "lyxparagraph.h"
+#include "paragraph.h"
#include "insets/inseterror.h"
#include "insets/insetbib.h"
#include "insets/insetspecialchar.h"
#include "layout.h"
#include "LyXView.h"
#include "support/textutils.h"
-#include "undo.h"
+#include "support/lstrings.h"
+#include "undo_funcs.h"
#include "buffer.h"
#include "bufferparams.h"
#include "lyx_gui_misc.h"
#include "lyxrc.h"
#include "FloatList.h"
#include "language.h"
+#include "ParagraphParameters.h"
+#include "support/LAssert.h"
using std::copy;
using std::find;
LyXText::LyXText(BufferView * bv)
-{
- bv_owner = bv;
- inset_owner = 0;
- init();
-}
+ : number_of_rows(0), height(0), width(0), first(0),
+ bv_owner(bv), inset_owner(0), the_locking_inset(0),
+ need_break_row(0), refresh_y(0), refresh_row(0),
+ status_(LyXText::UNCHANGED), firstrow(0), lastrow(0),
+ copylayouttype(0)
+{}
LyXText::LyXText(InsetText * inset)
-{
- inset_owner = inset;
- bv_owner = 0;
- init();
-}
-
-
-void LyXText::init()
-{
- the_locking_inset = 0;
- firstrow = 0;
- lastrow = 0;
- number_of_rows = 0;
- refresh_y = 0;
- height = 0;
- width = 0;
- first = 0;
- status = LyXText::UNCHANGED;
- // set cursor at the very top position
- selection = true; /* these setting is necessary
- because of the delete-empty-
- paragraph mechanism in
- SetCursor */
- if (bv_owner) {
- LyXParagraph * par = OwnerParagraph();
- current_font = GetFont(bv_owner->buffer(), par, 0);
- while (par) {
- InsertParagraph(bv_owner, par, lastrow);
- par = par->next();
+ : number_of_rows(0), height(0), width(0), first(0),
+ bv_owner(0), inset_owner(inset), the_locking_inset(0),
+ need_break_row(0), refresh_y(0), refresh_row(0),
+ status_(LyXText::UNCHANGED), firstrow(0), lastrow(0),
+ copylayouttype(0)
+{}
+
+void LyXText::init(BufferView * bview, bool reinit)
+{
+ if (reinit) {
+ // Delete all rows, this does not touch the paragraphs!
+ Row * tmprow = firstrow;
+ while (firstrow) {
+ tmprow = firstrow->next();
+ delete firstrow;
+ firstrow = tmprow;
}
- SetCursor(bv_owner, firstrow->par(), 0);
- } else
- current_font = LyXFont(LyXFont::ALL_SANE);
-
- sel_cursor = cursor;
- selection = false;
- mark_set = false;
-
- // no rebreak necessary
- need_break_row = 0;
-
- undo_finished = true;
- undo_frozen = false;
-
- // Default layouttype for copy environment type
- copylayouttype = 0;
-
-#if 0
- // Dump all rowinformation:
- Row * tmprow = firstrow;
- lyxerr << "Baseline Paragraph Pos Height Ascent Fill\n";
- while (tmprow) {
- lyxerr << tmprow->baseline() << '\t'
- << tmprow->par << '\t'
- << tmprow->pos() << '\t'
- << tmprow->height << '\t'
- << tmprow->ascent_of_text << '\t'
- << tmprow->fill << '\n';
- tmprow = tmprow->next();
- }
- lyxerr.flush();
-#endif
-}
-
-
-void LyXText::init(BufferView * bview)
-{
- if (firstrow)
+ lastrow = refresh_row = need_break_row = 0;
+ width = height = copylayouttype = 0;
+ number_of_rows = first = refresh_y = 0;
+ status_ = LyXText::UNCHANGED;
+ } else if (firstrow)
return;
- LyXParagraph * par = OwnerParagraph();
- current_font = GetFont(bview->buffer(), par, 0);
+ Paragraph * par = ownerParagraph();
+ current_font = getFont(bview->buffer(), par, 0);
while (par) {
- InsertParagraph(bview, par, lastrow);
+ insertParagraph(bview, par, lastrow);
par = par->next();
}
- SetCursorIntern(bview, firstrow->par(), 0);
- sel_cursor = cursor;
-#if 0
- // Dump all rowinformation:
- Row * tmprow = firstrow;
- lyxerr << "Width = " << width << endl;
- lyxerr << "Baseline Paragraph Pos Height Ascent Fill\n";
- while (tmprow) {
- lyxerr << tmprow->baseline() << '\t'
- << tmprow->par() << '\t'
- << tmprow->pos() << '\t'
- << tmprow->height() << '\t'
- << tmprow->ascent_of_text() << '\t'
- << tmprow->fill() << '\n';
- tmprow = tmprow->next();
- }
- lyxerr.flush();
-#endif
+ setCursorIntern(bview, firstrow->par(), 0);
+ selection.cursor = cursor;
}
+
LyXText::~LyXText()
{
// Delete all rows, this does not touch the paragraphs!
}
+namespace {
+
+LyXFont const realizeFont(LyXFont const & font,
+ Buffer const * buf,
+ Paragraph * par)
+{
+ LyXFont tmpfont(font);
+ Paragraph::depth_type par_depth = par->getDepth();
+
+ // Resolve against environment font information
+ while (par && par_depth && !tmpfont.resolved()) {
+ par = par->outerHook();
+ if (par) {
+ tmpfont.realize(textclasslist.
+ Style(buf->params.textclass,
+ par->getLayout()).font,
+ buf->params.language);
+ par_depth = par->getDepth();
+ }
+ }
+
+ tmpfont.realize(textclasslist.TextClass(buf->params.textclass).defaultfont(),
+ buf->params.language);
+
+ return tmpfont;
+}
+
+}
+
+
// Gets the fully instantiated font at a given position in a paragraph
-// Basically the same routine as LyXParagraph::getFont() in paragraph.C.
+// Basically the same routine as Paragraph::getFont() in paragraph.C.
// The difference is that this one is used for displaying, and thus we
// are allowed to make cosmetic improvements. For instance make footnotes
// smaller. (Asger)
// If position is -1, we get the layout font of the paragraph.
// If position is -2, we get the font of the manual label of the paragraph.
-LyXFont const LyXText::GetFont(Buffer const * buf, LyXParagraph * par,
- LyXParagraph::size_type pos) const
+LyXFont const LyXText::getFont(Buffer const * buf, Paragraph * par,
+ Paragraph::size_type pos) const
{
+ lyx::Assert(pos >= 0);
+
LyXLayout const & layout =
- textclasslist.Style(buf->params.textclass, par->GetLayout());
-
- char par_depth = par->GetDepth();
+ textclasslist.Style(buf->params.textclass, par->getLayout());
+
+ Paragraph::depth_type par_depth = par->getDepth();
// We specialize the 95% common case:
if (!par_depth) {
- if (pos >= 0){
- // 95% goes here
- if (layout.labeltype == LABEL_MANUAL
- && pos < BeginningOfMainBody(buf, par)) {
+ if (layout.labeltype == LABEL_MANUAL
+ && pos < beginningOfMainBody(buf, par)) {
// 1% goes here
- LyXFont f = par->GetFontSettings(buf->params,
- pos);
- return f.realize(layout.reslabelfont);
- } else {
- LyXFont f = par->GetFontSettings(buf->params, pos);
- return f.realize(layout.resfont);
- }
-
+ LyXFont f = par->getFontSettings(buf->params,
+ pos);
+ return f.realize(layout.reslabelfont, buf->params.language);
} else {
- // 5% goes here.
- // process layoutfont for pos == -1 and labelfont for pos < -1
- if (pos == -1)
- return layout.resfont;
- else
- return layout.reslabelfont;
+ LyXFont f = par->getFontSettings(buf->params, pos);
+ return f.realize(layout.resfont, buf->params.language);
}
}
-
+
// The uncommon case need not be optimized as much
+
+ LyXFont layoutfont;
+
+ if (pos < beginningOfMainBody(buf, par)) {
+ // 1% goes here
+ layoutfont = layout.labelfont;
+ } else {
+ // 99% goes here
+ layoutfont = layout.font;
+ }
- LyXFont layoutfont, tmpfont;
+ LyXFont tmpfont = par->getFontSettings(buf->params, pos);
+ tmpfont.realize(layoutfont, buf->params.language);
+
+ return realizeFont(tmpfont, buf, par);
+}
- if (pos >= 0){
- // 95% goes here
- if (pos < BeginningOfMainBody(buf, par)) {
- // 1% goes here
- layoutfont = layout.labelfont;
- } else {
- // 99% goes here
- layoutfont = layout.font;
+
+LyXFont const LyXText::getLayoutFont(Buffer const * buf, Paragraph * par) const
+{
+ LyXLayout const & layout =
+ textclasslist.Style(buf->params.textclass, par->getLayout());
+
+ Paragraph::depth_type par_depth = par->getDepth();
+
+ if (!par_depth) {
+ return layout.resfont;
+ }
+
+ return realizeFont(layout.font, buf, par);
+}
+
+
+LyXFont const LyXText::getLabelFont(Buffer const * buf, Paragraph * par) const
+{
+ LyXLayout const & layout =
+ textclasslist.Style(buf->params.textclass, par->getLayout());
+
+ Paragraph::depth_type par_depth = par->getDepth();
+
+ if (!par_depth) {
+ return layout.reslabelfont;
+ }
+
+ return realizeFont(layout.labelfont, buf, par);
+}
+
+
+void LyXText::setCharFont(BufferView * bv, Paragraph * par,
+ Paragraph::size_type pos, LyXFont const & fnt,
+ bool toggleall)
+{
+ Buffer const * buf = bv->buffer();
+ LyXFont font = getFont(buf, par, pos);
+ font.update(fnt, toggleall);
+ // Let the insets convert their font
+ if (par->getChar(pos) == Paragraph::META_INSET) {
+ Inset * inset = par->getInset(pos);
+ if (inset) {
+ if (inset->editable()==Inset::IS_EDITABLE) {
+ UpdatableInset * uinset =
+ static_cast<UpdatableInset *>(inset);
+ uinset->setFont(bv, fnt, toggleall, true);
+ }
}
- tmpfont = par->GetFontSettings(buf->params, pos);
- tmpfont.realize(layoutfont);
- } else {
- // 5% goes here.
- // process layoutfont for pos == -1 and labelfont for pos < -1
- if (pos == -1)
- tmpfont = layout.font;
- else
- tmpfont = layout.labelfont;
}
- // Resolve against environment font information
- while (par && par_depth && !tmpfont.resolved()) {
- par = par->DepthHook(par_depth - 1);
- if (par) {
- tmpfont.realize(textclasslist.
- Style(buf->params.textclass,
- par->GetLayout()).font);
- par_depth = par->GetDepth();
+ LyXLayout const & layout =
+ textclasslist.Style(buf->params.textclass,
+ par->getLayout());
+
+ // Get concrete layout font to reduce against
+ LyXFont layoutfont;
+
+ if (pos < beginningOfMainBody(buf, par))
+ layoutfont = layout.labelfont;
+ else
+ layoutfont = layout.font;
+
+ // Realize against environment font information
+ if (par->getDepth()){
+ Paragraph * tp = par;
+ while (!layoutfont.resolved() && tp && tp->getDepth()) {
+ tp = tp->outerHook();
+ if (tp)
+ layoutfont.realize(textclasslist.
+ Style(buf->params.textclass,
+ tp->getLayout()).font,
+ buf->params.language);
}
}
- tmpfont.realize(textclasslist.TextClass(buf->params.textclass).defaultfont());
+ layoutfont.realize(textclasslist.TextClass(buf->params.textclass).defaultfont(),
+ buf->params.language);
- return tmpfont;
+ // Now, reduce font against full layout font
+ font.reduce(layoutfont);
+
+ par->setFont(pos, font);
}
-void LyXText::SetCharFont(Buffer const * buf, LyXParagraph * par,
- LyXParagraph::size_type pos,
- LyXFont const & fnt)
+void LyXText::setCharFont(Buffer const * buf, Paragraph * par,
+ Paragraph::size_type pos, LyXFont const & fnt)
{
LyXFont font(fnt);
- // Let the insets convert their font
- if (par->GetChar(pos) == LyXParagraph::META_INSET) {
- if (par->GetInset(pos))
- font = par->GetInset(pos)->ConvertFont(font);
- }
LyXLayout const & layout =
textclasslist.Style(buf->params.textclass,
- par->GetLayout());
+ par->getLayout());
// Get concrete layout font to reduce against
LyXFont layoutfont;
- if (pos < BeginningOfMainBody(buf, par))
+ if (pos < beginningOfMainBody(buf, par))
layoutfont = layout.labelfont;
else
layoutfont = layout.font;
// Realize against environment font information
- if (par->GetDepth()){
- LyXParagraph * tp = par;
- while (!layoutfont.resolved() && tp && tp->GetDepth()) {
- tp = tp->DepthHook(tp->GetDepth()-1);
+ if (par->getDepth()){
+ Paragraph * tp = par;
+ while (!layoutfont.resolved() && tp && tp->getDepth()) {
+ tp = tp->outerHook();
if (tp)
layoutfont.realize(textclasslist.
- Style(buf->params.textclass,
- tp->GetLayout()).font);
+ Style(buf->params.textclass,
+ tp->getLayout()).font,
+ buf->params.language);
}
}
- layoutfont.realize(textclasslist.TextClass(buf->params.textclass).defaultfont());
+ layoutfont.realize(textclasslist.TextClass(buf->params.textclass).defaultfont(),
+ buf->params.language);
// Now, reduce font against full layout font
font.reduce(layoutfont);
- par->SetFont(pos, font);
+ par->setFont(pos, font);
}
-/* inserts a new row behind the specified row, increments
- * the touched counters */
-void LyXText::InsertRow(Row * row, LyXParagraph * par,
- LyXParagraph::size_type pos) const
+// inserts a new row behind the specified row, increments
+// the touched counters
+void LyXText::insertRow(Row * row, Paragraph * par,
+ Paragraph::size_type pos) const
{
Row * tmprow = new Row;
if (!row) {
if (row == lastrow)
lastrow = tmprow;
- ++number_of_rows; // one more row
+ ++number_of_rows;
}
// removes the row and reset the touched counters
-void LyXText::RemoveRow(Row * row) const
+void LyXText::removeRow(Row * row) const
{
/* this must not happen before the currentrow for clear reasons.
so the trick is just to set the current row onto the previous
row of this row */
int unused_y;
- GetRow(row->par(), row->pos(), unused_y);
+ getRow(row->par(), row->pos(), unused_y);
if (row->next())
row->next()->previous(row->previous());
// remove all following rows of the paragraph of the specified row.
-void LyXText::RemoveParagraph(Row * row) const
+void LyXText::removeParagraph(Row * row) const
{
- LyXParagraph * tmppar = row->par();
+ Paragraph * tmppar = row->par();
row = row->next();
Row * tmprow;
while (row && row->par() == tmppar) {
tmprow = row->next();
- RemoveRow(row);
+ removeRow(row);
row = tmprow;
}
}
// insert the specified paragraph behind the specified row
-void LyXText::InsertParagraph(BufferView * bview, LyXParagraph * par,
- Row * row) const
+void LyXText::insertParagraph(BufferView * bview, Paragraph * par,
+ Row * row) const
{
- InsertRow(row, par, 0); /* insert a new row, starting
- * at postition 0 */
+ insertRow(row, par, 0); /* insert a new row, starting
+ * at postition 0 */
- SetCounter(bview->buffer(), par); // set the counters
+ setCounter(bview->buffer(), par); // set the counters
// and now append the whole paragraph behind the new row
if (!row) {
firstrow->height(0);
- AppendParagraph(bview, firstrow);
+ appendParagraph(bview, firstrow);
} else {
row->next()->height(0);
- AppendParagraph(bview, row->next());
+ appendParagraph(bview, row->next());
}
}
+Inset * LyXText::getInset() const
+{
+ Inset * inset = 0;
+ if (cursor.pos() == 0 && cursor.par()->bibkey) {
+ inset = cursor.par()->bibkey;
+ } else if (cursor.pos() < cursor.par()->size()
+ && cursor.par()->getChar(cursor.pos()) == Paragraph::META_INSET) {
+ inset = cursor.par()->getInset(cursor.pos());
+ }
+ return inset;
+}
+
+
+void LyXText::toggleInset(BufferView * bview)
+{
+ Inset * inset = getInset();
+ if (!inset->editable())
+ return;
+ //bview->owner()->message(inset->editMessage());
+
+ // do we want to keep this?? (JMarc)
+ if (inset->editable() != Inset::HIGHLY_EDITABLE)
+ setCursorParUndo(bview);
+
+ if (inset->isOpen()) {
+ inset->close(bview);
+ } else {
+ inset->open(bview);
+ }
+#if 0
+ inset->open(bview, !inset->isOpen());
+#endif
+}
+
+
/* used in setlayout */
// Asger is not sure we want to do this...
-void LyXText::MakeFontEntriesLayoutSpecific(Buffer const * buf,
- LyXParagraph * par)
+void LyXText::makeFontEntriesLayoutSpecific(Buffer const * buf,
+ Paragraph * par)
{
-
LyXLayout const & layout =
- textclasslist.Style(buf->params.textclass, par->GetLayout());
+ textclasslist.Style(buf->params.textclass, par->getLayout());
- LyXFont layoutfont, tmpfont;
- for (LyXParagraph::size_type pos = 0;
- pos < par->size(); ++pos) {
- if (pos < BeginningOfMainBody(buf, par))
+ LyXFont layoutfont;
+ for (Paragraph::size_type pos = 0; pos < par->size(); ++pos) {
+ if (pos < beginningOfMainBody(buf, par))
layoutfont = layout.labelfont;
else
layoutfont = layout.font;
- tmpfont = par->GetFontSettings(buf->params, pos);
+ LyXFont tmpfont = par->getFontSettings(buf->params, pos);
tmpfont.reduce(layoutfont);
- par->SetFont(pos, tmpfont);
+ par->setFont(pos, tmpfont);
}
}
-LyXParagraph * LyXText::SetLayout(BufferView * bview,
- LyXCursor & cur, LyXCursor & sstart_cur,
- LyXCursor & send_cur,
- LyXTextClass::size_type layout)
+Paragraph * LyXText::setLayout(BufferView * bview,
+ LyXCursor & cur, LyXCursor & sstart_cur,
+ LyXCursor & send_cur,
+ LyXTextClass::size_type layout)
{
- LyXParagraph * endpar = send_cur.par()->next();
- LyXParagraph * undoendpar = endpar;
+ Paragraph * endpar = send_cur.par()->next();
+ Paragraph * undoendpar = endpar;
- if (endpar && endpar->GetDepth()) {
- while (endpar && endpar->GetDepth()) {
+ if (endpar && endpar->getDepth()) {
+ while (endpar && endpar->getDepth()) {
endpar = endpar->next();
undoendpar = endpar;
}
endpar = endpar->next(); // because of parindents etc.
}
- SetUndo(bview->buffer(), Undo::EDIT,
- sstart_cur.par()->previous(),
- undoendpar);
+ setUndo(bview, Undo::EDIT,
+ sstart_cur.par(), undoendpar);
- /* ok we have a selection. This is always between sstart_cur
- * and sel_end cursor */
+ // ok we have a selection. This is always between sstart_cur
+ // and sel_end cursor
cur = sstart_cur;
LyXLayout const & lyxlayout =
textclasslist.Style(bview->buffer()->params.textclass, layout);
while (cur.par() != send_cur.par()) {
- cur.par()->SetLayout(layout);
- MakeFontEntriesLayoutSpecific(bview->buffer(), cur.par());
- LyXParagraph * fppar = cur.par();
- fppar->params.spaceTop(lyxlayout.fill_top ?
- VSpace(VSpace::VFILL)
- : VSpace(VSpace::NONE));
- fppar->params.spaceBottom(lyxlayout.fill_bottom ?
- VSpace(VSpace::VFILL)
- : VSpace(VSpace::NONE));
+ cur.par()->setLayout(layout);
+ makeFontEntriesLayoutSpecific(bview->buffer(), cur.par());
+ Paragraph * fppar = cur.par();
+ fppar->params().spaceTop(lyxlayout.fill_top ?
+ VSpace(VSpace::VFILL)
+ : VSpace(VSpace::NONE));
+ fppar->params().spaceBottom(lyxlayout.fill_bottom ?
+ VSpace(VSpace::VFILL)
+ : VSpace(VSpace::NONE));
if (lyxlayout.margintype == MARGIN_MANUAL)
- cur.par()->SetLabelWidthString(lyxlayout.labelstring());
+ cur.par()->setLabelWidthString(lyxlayout.labelstring());
if (lyxlayout.labeltype != LABEL_BIBLIO
&& fppar->bibkey) {
delete fppar->bibkey;
}
cur.par(cur.par()->next());
}
- cur.par()->SetLayout(layout);
- MakeFontEntriesLayoutSpecific(bview->buffer(), cur.par());
- LyXParagraph * fppar = cur.par();
- fppar->params.spaceTop(lyxlayout.fill_top ?
- VSpace(VSpace::VFILL) : VSpace(VSpace::NONE));
- fppar->params.spaceBottom(lyxlayout.fill_bottom ?
- VSpace(VSpace::VFILL) : VSpace(VSpace::NONE));
+ cur.par()->setLayout(layout);
+ makeFontEntriesLayoutSpecific(bview->buffer(), cur.par());
+ Paragraph * fppar = cur.par();
+ fppar->params().spaceTop(lyxlayout.fill_top ?
+ VSpace(VSpace::VFILL) : VSpace(VSpace::NONE));
+ fppar->params().spaceBottom(lyxlayout.fill_bottom ?
+ VSpace(VSpace::VFILL) : VSpace(VSpace::NONE));
if (lyxlayout.margintype == MARGIN_MANUAL)
- cur.par()->SetLabelWidthString(lyxlayout.labelstring());
+ cur.par()->setLabelWidthString(lyxlayout.labelstring());
if (lyxlayout.labeltype != LABEL_BIBLIO
&& fppar->bibkey) {
delete fppar->bibkey;
// set layout over selection and make a total rebreak of those paragraphs
-void LyXText::SetLayout(BufferView * bview, LyXTextClass::size_type layout)
+void LyXText::setLayout(BufferView * bview, LyXTextClass::size_type layout)
{
LyXCursor tmpcursor = cursor; /* store the current cursor */
// if there is no selection just set the layout
// of the current paragraph */
- if (!selection) {
- sel_start_cursor = cursor; // dummy selection
- sel_end_cursor = cursor;
- }
- LyXParagraph *
- endpar = SetLayout(bview, cursor, sel_start_cursor,
- sel_end_cursor, layout);
- RedoParagraphs(bview, sel_start_cursor, endpar);
+ if (!selection.set()) {
+ selection.start = cursor; // dummy selection
+ selection.end = cursor;
+ }
+ Paragraph * endpar = setLayout(bview, cursor, selection.start,
+ selection.end, layout);
+ redoParagraphs(bview, selection.start, endpar);
// we have to reset the selection, because the
// geometry could have changed
- SetCursor(bview, sel_start_cursor.par(),
- sel_start_cursor.pos(), false);
- sel_cursor = cursor;
- SetCursor(bview, sel_end_cursor.par(), sel_end_cursor.pos(),
- false);
- UpdateCounters(bview, cursor.row());
- ClearSelection(bview);
- SetSelection(bview);
- SetCursor(bview, tmpcursor.par(), tmpcursor.pos(), true);
+ setCursor(bview, selection.start.par(),
+ selection.start.pos(), false);
+ selection.cursor = cursor;
+ setCursor(bview, selection.end.par(), selection.end.pos(), false);
+ updateCounters(bview, cursor.row());
+ clearSelection();
+ setSelection(bview);
+ setCursor(bview, tmpcursor.par(), tmpcursor.pos(), true);
}
// increment depth over selection and
// make a total rebreak of those paragraphs
-void LyXText::IncDepth(BufferView * bview)
+void LyXText::incDepth(BufferView * bview)
{
// If there is no selection, just use the current paragraph
- if (!selection) {
- sel_start_cursor = cursor; // dummy selection
- sel_end_cursor = cursor;
+ if (!selection.set()) {
+ selection.start = cursor; // dummy selection
+ selection.end = cursor;
}
// We end at the next paragraph with depth 0
- LyXParagraph * endpar = sel_end_cursor.par()->next();
+ Paragraph * endpar = selection.end.par()->next();
- LyXParagraph * undoendpar = endpar;
+ Paragraph * undoendpar = endpar;
- if (endpar && endpar->GetDepth()) {
- while (endpar && endpar->GetDepth()) {
+ if (endpar && endpar->getDepth()) {
+ while (endpar && endpar->getDepth()) {
endpar = endpar->next();
undoendpar = endpar;
}
- }
- else if (endpar) {
+ } else if (endpar) {
endpar = endpar->next(); // because of parindents etc.
}
- SetUndo(bview->buffer(), Undo::EDIT,
- sel_start_cursor.par()->previous(),
- undoendpar);
+ setUndo(bview, Undo::EDIT,
+ selection.start.par(), undoendpar);
LyXCursor tmpcursor = cursor; // store the current cursor
// ok we have a selection. This is always between sel_start_cursor
// and sel_end cursor
- cursor = sel_start_cursor;
+ cursor = selection.start;
bool anything_changed = false;
while (true) {
// NOTE: you can't change the depth of a bibliography entry
if (
- textclasslist.Style(bview->buffer()->params.textclass,
- cursor.par()->GetLayout()
- ).labeltype != LABEL_BIBLIO) {
- LyXParagraph * prev = cursor.par()->previous();
+ textclasslist.Style(bview->buffer()->params.textclass,
+ cursor.par()->getLayout()
+ ).labeltype != LABEL_BIBLIO) {
+ Paragraph * prev = cursor.par()->previous();
if (prev
- && (prev->GetDepth() - cursor.par()->GetDepth() > 0
- || (prev->GetDepth() == cursor.par()->GetDepth()
+ && (prev->getDepth() - cursor.par()->getDepth() > 0
+ || (prev->getDepth() == cursor.par()->getDepth()
&& textclasslist.Style(bview->buffer()->params.textclass,
- prev->GetLayout()).isEnvironment()))) {
- cursor.par()->params.depth(cursor.par()->params.depth() + 1);
+ prev->getLayout()).isEnvironment()))) {
+ cursor.par()->params().depth(cursor.par()->params().depth() + 1);
anything_changed = true;
- }
+ }
}
- if (cursor.par() == sel_end_cursor.par())
- break;
+ if (cursor.par() == selection.end.par())
+ break;
cursor.par(cursor.par()->next());
}
// if nothing changed set all depth to 0
if (!anything_changed) {
- cursor = sel_start_cursor;
- while (cursor.par() != sel_end_cursor.par()) {
- cursor.par()->params.depth(0);
+ cursor = selection.start;
+ while (cursor.par() != selection.end.par()) {
+ cursor.par()->params().depth(0);
cursor.par(cursor.par()->next());
}
- cursor.par()->params.depth(0);
+ cursor.par()->params().depth(0);
}
- RedoParagraphs(bview, sel_start_cursor, endpar);
+ redoParagraphs(bview, selection.start, endpar);
// we have to reset the selection, because the
// geometry could have changed
- SetCursor(bview, sel_start_cursor.par(),
- sel_start_cursor.pos());
- sel_cursor = cursor;
- SetCursor(bview, sel_end_cursor.par(), sel_end_cursor.pos());
- UpdateCounters(bview, cursor.row());
- ClearSelection(bview);
- SetSelection(bview);
- SetCursor(bview, tmpcursor.par(), tmpcursor.pos());
+ setCursor(bview, selection.start.par(), selection.start.pos());
+ selection.cursor = cursor;
+ setCursor(bview, selection.end.par(), selection.end.pos());
+ updateCounters(bview, cursor.row());
+ clearSelection();
+ setSelection(bview);
+ setCursor(bview, tmpcursor.par(), tmpcursor.pos());
}
// decrement depth over selection and
// make a total rebreak of those paragraphs
-void LyXText::DecDepth(BufferView * bview)
+void LyXText::decDepth(BufferView * bview)
{
// if there is no selection just set the layout
// of the current paragraph
- if (!selection) {
- sel_start_cursor = cursor; // dummy selection
- sel_end_cursor = cursor;
+ if (!selection.set()) {
+ selection.start = cursor; // dummy selection
+ selection.end = cursor;
}
- LyXParagraph * endpar = sel_end_cursor.par()->next();
- LyXParagraph * undoendpar = endpar;
+ Paragraph * endpar = selection.end.par()->next();
+ Paragraph * undoendpar = endpar;
- if (endpar && endpar->GetDepth()) {
- while (endpar && endpar->GetDepth()) {
+ if (endpar && endpar->getDepth()) {
+ while (endpar && endpar->getDepth()) {
endpar = endpar->next();
undoendpar = endpar;
}
- }
- else if (endpar) {
+ } else if (endpar) {
endpar = endpar->next(); // because of parindents etc.
}
- SetUndo(bview->buffer(), Undo::EDIT,
- sel_start_cursor.par()->previous(),
- undoendpar);
+ setUndo(bview, Undo::EDIT,
+ selection.start.par(), undoendpar);
LyXCursor tmpcursor = cursor; // store the current cursor
// ok we have a selection. This is always between sel_start_cursor
// and sel_end cursor
- cursor = sel_start_cursor;
+ cursor = selection.start;
while (true) {
- if (cursor.par()->params.depth())
- cursor.par()->params.depth(cursor.par()->params.depth() - 1);
- if (cursor.par() == sel_end_cursor.par())
+ if (cursor.par()->params().depth()) {
+ cursor.par()->params()
+ .depth(cursor.par()->params().depth() - 1);
+ }
+ if (cursor.par() == selection.end.par()) {
break;
+ }
cursor.par(cursor.par()->next());
}
- RedoParagraphs(bview, sel_start_cursor, endpar);
+ redoParagraphs(bview, selection.start, endpar);
// we have to reset the selection, because the
// geometry could have changed
- SetCursor(bview, sel_start_cursor.par(),
- sel_start_cursor.pos());
- sel_cursor = cursor;
- SetCursor(bview, sel_end_cursor.par(), sel_end_cursor.pos());
- UpdateCounters(bview, cursor.row());
- ClearSelection(bview);
- SetSelection(bview);
- SetCursor(bview, tmpcursor.par(), tmpcursor.pos());
+ setCursor(bview, selection.start.par(),
+ selection.start.pos());
+ selection.cursor = cursor;
+ setCursor(bview, selection.end.par(), selection.end.pos());
+ updateCounters(bview, cursor.row());
+ clearSelection();
+ setSelection(bview);
+ setCursor(bview, tmpcursor.par(), tmpcursor.pos());
}
// set font over selection and make a total rebreak of those paragraphs
-void LyXText::SetFont(BufferView * bview, LyXFont const & font, bool toggleall)
+void LyXText::setFont(BufferView * bview, LyXFont const & font, bool toggleall)
{
// if there is no selection just set the current_font
- if (!selection) {
+ if (!selection.set()) {
// Determine basis font
LyXFont layoutfont;
- if (cursor.pos() < BeginningOfMainBody(bview->buffer(),
- cursor.par()))
- layoutfont = GetFont(bview->buffer(), cursor.par(),-2);
- else
- layoutfont = GetFont(bview->buffer(), cursor.par(),-1);
+ if (cursor.pos() < beginningOfMainBody(bview->buffer(),
+ cursor.par())) {
+ layoutfont = getLabelFont(bview->buffer(),
+ cursor.par());
+ } else {
+ layoutfont = getLayoutFont(bview->buffer(),
+ cursor.par());
+ }
// Update current font
- real_current_font.update(font,
- bview->buffer()->params.language,
- toggleall);
+ real_current_font.update(font, toggleall);
// Reduce to implicit settings
current_font = real_current_font;
current_font.reduce(layoutfont);
// And resolve it completely
- real_current_font.realize(layoutfont);
+ real_current_font.realize(layoutfont,
+ bview->buffer()->params.language);
return;
}
// ok we have a selection. This is always between sel_start_cursor
// and sel_end cursor
- SetUndo(bview->buffer(), Undo::EDIT,
- sel_start_cursor.par()->previous(),
- sel_end_cursor.par()->next());
- cursor = sel_start_cursor;
- while (cursor.par() != sel_end_cursor.par() ||
- (cursor.pos() < sel_end_cursor.pos())) {
+ setUndo(bview, Undo::EDIT,
+ selection.start.par(), selection.end.par()->next());
+ freezeUndo();
+ cursor = selection.start;
+ while (cursor.par() != selection.end.par() ||
+ (cursor.pos() < selection.end.pos()))
+ {
if (cursor.pos() < cursor.par()->size()) {
// an open footnote should behave
// like a closed one
- LyXFont newfont = GetFont(bview->buffer(),
- cursor.par(), cursor.pos());
- newfont.update(font,
- bview->buffer()->params.language,
- toggleall);
- SetCharFont(bview->buffer(),
- cursor.par(), cursor.pos(), newfont);
+ setCharFont(bview, cursor.par(), cursor.pos(),
+ font, toggleall);
cursor.pos(cursor.pos() + 1);
} else {
cursor.pos(0);
cursor.par(cursor.par()->next());
}
}
+ unFreezeUndo();
- RedoParagraphs(bview, sel_start_cursor, sel_end_cursor.par()->next());
+ redoParagraphs(bview, selection.start, selection.end.par()->next());
// we have to reset the selection, because the
// geometry could have changed
- SetCursor(bview, sel_start_cursor.par(), sel_start_cursor.pos());
- sel_cursor = cursor;
- SetCursor(bview, sel_end_cursor.par(), sel_end_cursor.pos());
- ClearSelection(bview);
- SetSelection(bview);
- SetCursor(bview, tmpcursor.par(), tmpcursor.pos(), true,
- tmpcursor.boundary());
+ setCursor(bview, selection.start.par(), selection.start.pos());
+ selection.cursor = cursor;
+ setCursor(bview, selection.end.par(), selection.end.pos());
+ clearSelection();
+ setSelection(bview);
+ setCursor(bview, tmpcursor.par(), tmpcursor.pos(), true,
+ tmpcursor.boundary());
}
-void LyXText::RedoHeightOfParagraph(BufferView * bview, LyXCursor const & cur)
+void LyXText::redoHeightOfParagraph(BufferView * bview, LyXCursor const & cur)
{
Row * tmprow = cur.row();
int y = cur.y() - tmprow->baseline();
- SetHeightOfRow(bview, tmprow);
- LyXParagraph * first_phys_par = tmprow->par();
-
- // find the first row of the paragraph
- if (first_phys_par != tmprow->par())
- while (tmprow->previous()
- && tmprow->previous()->par() != first_phys_par) {
- tmprow = tmprow->previous();
- y -= tmprow->height();
- SetHeightOfRow(bview, tmprow);
- }
- while (tmprow->previous() && tmprow->previous()->par() == first_phys_par) {
+ setHeightOfRow(bview, tmprow);
+
+ while (tmprow->previous()
+ && tmprow->previous()->par() == tmprow->par()) {
tmprow = tmprow->previous();
y -= tmprow->height();
- SetHeightOfRow(bview, tmprow);
+ setHeightOfRow(bview, tmprow);
}
// we can set the refreshing parameters now
- status = LyXText::NEED_MORE_REFRESH;
+ status(bview, LyXText::NEED_MORE_REFRESH);
refresh_y = y;
refresh_row = tmprow;
- SetCursor(bview, cur.par(), cur.pos(), false, cursor.boundary());
+ setCursor(bview, cur.par(), cur.pos(), false, cursor.boundary());
}
-void LyXText::RedoDrawingOfParagraph(BufferView * bview, LyXCursor const & cur)
+void LyXText::redoDrawingOfParagraph(BufferView * bview, LyXCursor const & cur)
{
Row * tmprow = cur.row();
int y = cur.y() - tmprow->baseline();
- SetHeightOfRow(bview, tmprow);
- LyXParagraph * first_phys_par = tmprow->par();
+ setHeightOfRow(bview, tmprow);
- // find the first row of the paragraph
- if (first_phys_par != tmprow->par())
- while (tmprow->previous() && tmprow->previous()->par() != first_phys_par) {
- tmprow = tmprow->previous();
- y -= tmprow->height();
- }
- while (tmprow->previous() && tmprow->previous()->par() == first_phys_par) {
+ while (tmprow->previous()
+ && tmprow->previous()->par() == tmprow->par()) {
tmprow = tmprow->previous();
y -= tmprow->height();
}
-
+
// we can set the refreshing parameters now
- if (status == LyXText::UNCHANGED || y < refresh_y) {
+ if (status_ == LyXText::UNCHANGED || y < refresh_y) {
refresh_y = y;
refresh_row = tmprow;
}
- status = LyXText::NEED_MORE_REFRESH;
- SetCursor(bview, cur.par(), cur.pos());
+ status(bview, LyXText::NEED_MORE_REFRESH);
+ setCursor(bview, cur.par(), cur.pos());
}
-/* deletes and inserts again all paragaphs between the cursor
-* and the specified par
-* This function is needed after SetLayout and SetFont etc. */
-void LyXText::RedoParagraphs(BufferView * bview, LyXCursor const & cur,
- LyXParagraph const * endpar) const
+// deletes and inserts again all paragaphs between the cursor
+// and the specified par
+// This function is needed after SetLayout and SetFont etc.
+void LyXText::redoParagraphs(BufferView * bview, LyXCursor const & cur,
+ Paragraph const * endpar) const
{
Row * tmprow2;
- LyXParagraph * tmppar = 0, * first_phys_par = 0;
+ Paragraph * tmppar = 0;
+ Paragraph * first_phys_par = 0;
Row * tmprow = cur.row();
int y = cur.y() - tmprow->baseline();
-
- if (!tmprow->previous()){
- first_phys_par = FirstParagraph(); // a trick/hack for UNDO
+
+ if (!tmprow->previous()) {
+ // a trick/hack for UNDO
+ // Can somebody please tell me _why_ this solves
+ // anything. (Lgb)
+ first_phys_par = firstParagraph();
} else {
first_phys_par = tmprow->par();
- // find the first row of the paragraph
- if (first_phys_par != tmprow->par())
- while (tmprow->previous() &&
- (tmprow->previous()->par() != first_phys_par)) {
- tmprow = tmprow->previous();
- y -= tmprow->height();
- }
while (tmprow->previous()
- && tmprow->previous()->par() == first_phys_par) {
+ && tmprow->previous()->par() == first_phys_par)
+ {
tmprow = tmprow->previous();
y -= tmprow->height();
}
}
-
+
// we can set the refreshing parameters now
- status = LyXText::NEED_MORE_REFRESH;
+ status(bview, LyXText::NEED_MORE_REFRESH);
refresh_y = y;
refresh_row = tmprow->previous(); /* the real refresh row will
- be deleted, so I store
- the previous here */
+ be deleted, so I store
+ the previous here */
// remove it
if (tmprow->next())
tmppar = tmprow->next()->par();
else
tmppar = 0;
while (tmppar != endpar) {
- RemoveRow(tmprow->next());
+ removeRow(tmprow->next());
if (tmprow->next())
tmppar = tmprow->next()->par();
else
// remove the first one
tmprow2 = tmprow; /* this is because tmprow->previous()
- can be 0 */
+ can be 0 */
tmprow = tmprow->previous();
- RemoveRow(tmprow2);
+ removeRow(tmprow2);
tmppar = first_phys_par;
do {
if (tmppar) {
- InsertParagraph(bview, tmppar, tmprow);
- if (!tmprow)
+ insertParagraph(bview, tmppar, tmprow);
+ if (!tmprow) {
tmprow = firstrow;
- while (tmprow->next() && tmprow->next()->par() == tmppar)
+ }
+ while (tmprow->next()
+ && tmprow->next()->par() == tmppar) {
tmprow = tmprow->next();
+ }
tmppar = tmppar->next();
}
- } while (tmppar != endpar);
+ } while (tmppar && tmppar != endpar);
// this is because of layout changes
if (refresh_row) {
refresh_y -= refresh_row->height();
- SetHeightOfRow(bview, refresh_row);
+ setHeightOfRow(bview, refresh_row);
} else {
refresh_row = firstrow;
refresh_y = 0;
- SetHeightOfRow(bview, refresh_row);
+ setHeightOfRow(bview, refresh_row);
}
if (tmprow && tmprow->next())
- SetHeightOfRow(bview, tmprow->next());
+ setHeightOfRow(bview, tmprow->next());
}
-bool LyXText::FullRebreak(BufferView * bview)
+bool LyXText::fullRebreak(BufferView * bview)
{
if (!firstrow) {
init(bview);
return true;
}
if (need_break_row) {
- BreakAgain(bview, need_break_row);
+ breakAgain(bview, need_break_row);
need_break_row = 0;
return true;
}
}
-/* important for the screen */
+// important for the screen
/* the cursor set functions have a special mechanism. When they
* They also delete the corresponding row */
// need the selection cursor:
-void LyXText::SetSelection(BufferView * bview)
+void LyXText::setSelection(BufferView * bview)
{
- const bool lsel = selection;
+ bool const lsel = selection.set();
- if (!selection) {
- last_sel_cursor = sel_cursor;
- sel_start_cursor = sel_cursor;
- sel_end_cursor = sel_cursor;
+ if (!selection.set()) {
+ last_sel_cursor = selection.cursor;
+ selection.start = selection.cursor;
+ selection.end = selection.cursor;
}
- selection = true;
+ selection.set(true);
// first the toggling area
if (cursor.y() < last_sel_cursor.y()
|| (cursor.y() == last_sel_cursor.y()
- && cursor.x() < last_sel_cursor.x())) {
+ && cursor.x() < last_sel_cursor.x())) {
toggle_end_cursor = last_sel_cursor;
toggle_cursor = cursor;
} else {
// and now the whole selection
- if (sel_cursor.par() == cursor.par())
- if (sel_cursor.pos() < cursor.pos()) {
- sel_end_cursor = cursor;
- sel_start_cursor = sel_cursor;
- } else {
- sel_end_cursor = sel_cursor;
- sel_start_cursor = cursor;
- }
- else if (sel_cursor.y() < cursor.y() ||
- (sel_cursor.y() == cursor.y() && sel_cursor.x() < cursor.x())) {
- sel_end_cursor = cursor;
- sel_start_cursor = sel_cursor;
+ if (selection.cursor.par() == cursor.par())
+ if (selection.cursor.pos() < cursor.pos()) {
+ selection.end = cursor;
+ selection.start = selection.cursor;
+ } else {
+ selection.end = selection.cursor;
+ selection.start = cursor;
+ }
+ else if (selection.cursor.y() < cursor.y() ||
+ (selection.cursor.y() == cursor.y()
+ && selection.cursor.x() < cursor.x())) {
+ selection.end = cursor;
+ selection.start = selection.cursor;
}
else {
- sel_end_cursor = sel_cursor;
- sel_start_cursor = cursor;
+ selection.end = selection.cursor;
+ selection.start = cursor;
}
// a selection with no contents is not a selection
- if (sel_start_cursor.par() == sel_end_cursor.par() &&
- sel_start_cursor.pos() == sel_end_cursor.pos())
- selection = false;
+ if (selection.start.par() == selection.end.par() &&
+ selection.start.pos() == selection.end.pos())
+ selection.set(false);
- if (inset_owner && (selection || lsel))
- inset_owner->SetUpdateStatus(bview, InsetText::SELECTION);
+ if (inset_owner && (selection.set() || lsel))
+ inset_owner->setUpdateStatus(bview, InsetText::SELECTION);
}
string const LyXText::selectionAsString(Buffer const * buffer) const
{
- if (!selection) return string();
+ if (!selection.set()) return string();
string result;
// Special handling if the whole selection is within one paragraph
- if (sel_start_cursor.par() == sel_end_cursor.par()) {
- result += sel_start_cursor.par()->String(buffer,
- sel_start_cursor.pos(),
- sel_end_cursor.pos());
+ if (selection.start.par() == selection.end.par()) {
+ result += selection.start.par()->asString(buffer,
+ selection.start.pos(),
+ selection.end.pos());
return result;
}
// The selection spans more than one paragraph
// First paragraph in selection
- result += sel_start_cursor.par()->String(buffer,
- sel_start_cursor.pos(),
- sel_start_cursor.par()->size())
+ result += selection.start.par()->asString(buffer,
+ selection.start.pos(),
+ selection.start.par()->size())
+ "\n\n";
// The paragraphs in between (if any)
- LyXCursor tmpcur(sel_start_cursor);
+ LyXCursor tmpcur(selection.start);
tmpcur.par(tmpcur.par()->next());
- while (tmpcur.par() != sel_end_cursor.par()) {
- result += tmpcur.par()->String(buffer, 0, tmpcur.par()->size()) + "\n\n";
- tmpcur.par(tmpcur.par()->next()); // Or NextAfterFootnote??
+ while (tmpcur.par() != selection.end.par()) {
+ result += tmpcur.par()->asString(buffer, 0,
+ tmpcur.par()->size()) +"\n\n";
+ tmpcur.par(tmpcur.par()->next());
}
// Last paragraph in selection
- result += sel_end_cursor.par()->String(buffer, 0, sel_end_cursor.pos());
+ result += selection.end.par()->asString(buffer, 0,
+ selection.end.pos());
return result;
}
-void LyXText::ClearSelection(BufferView * /*bview*/) const
+void LyXText::clearSelection() const
{
- selection = false;
- mark_set = false;
+ selection.set(false);
+ selection.mark(false);
+ selection.end = selection.start = selection.cursor = cursor;
}
-void LyXText::CursorHome(BufferView * bview) const
+void LyXText::cursorHome(BufferView * bview) const
{
- SetCursor(bview, cursor.par(), cursor.row()->pos());
+ setCursor(bview, cursor.par(), cursor.row()->pos());
}
-void LyXText::CursorEnd(BufferView * bview) const
+void LyXText::cursorEnd(BufferView * bview) const
{
- if (!cursor.row()->next() || cursor.row()->next()->par() != cursor.row()->par())
- SetCursor(bview, cursor.par(), RowLast(cursor.row()) + 1);
- else {
+ if (!cursor.row()->next()
+ || cursor.row()->next()->par() != cursor.row()->par()) {
+ setCursor(bview, cursor.par(), rowLast(cursor.row()) + 1);
+ } else {
if (cursor.par()->size() &&
- (cursor.par()->GetChar(RowLast(cursor.row())) == ' '
- || cursor.par()->IsNewline(RowLast(cursor.row()))))
- SetCursor(bview, cursor.par(), RowLast(cursor.row()));
- else
- SetCursor(bview,cursor.par(), RowLast(cursor.row()) + 1);
+ (cursor.par()->getChar(rowLast(cursor.row())) == ' '
+ || cursor.par()->isNewline(rowLast(cursor.row())))) {
+ setCursor(bview, cursor.par(), rowLast(cursor.row()));
+ } else {
+ setCursor(bview,cursor.par(),
+ rowLast(cursor.row()) + 1);
+ }
}
}
-void LyXText::CursorTop(BufferView * bview) const
+void LyXText::cursorTop(BufferView * bview) const
{
while (cursor.par()->previous())
cursor.par(cursor.par()->previous());
- SetCursor(bview, cursor.par(), 0);
+ setCursor(bview, cursor.par(), 0);
}
-void LyXText::CursorBottom(BufferView * bview) const
+void LyXText::cursorBottom(BufferView * bview) const
{
while (cursor.par()->next())
cursor.par(cursor.par()->next());
- SetCursor(bview, cursor.par(), cursor.par()->size());
+ setCursor(bview, cursor.par(), cursor.par()->size());
}
-void LyXText::ToggleFree(BufferView * bview,
- LyXFont const & font, bool toggleall)
+void LyXText::toggleFree(BufferView * bview,
+ LyXFont const & font, bool toggleall)
{
// If the mask is completely neutral, tell user
if (font == LyXFont(LyXFont::ALL_IGNORE)) {
// is disabled.
LyXCursor resetCursor = cursor;
bool implicitSelection = (font.language() == ignore_language
- && font.number() == LyXFont::IGNORE)
- ? SelectWordWhenUnderCursor(bview) : false;
+ && font.number() == LyXFont::IGNORE)
+ ? selectWordWhenUnderCursor(bview, WHOLE_WORD_STRICT) : false;
// Set font
- SetFont(bview, font, toggleall);
+ setFont(bview, font, toggleall);
- /* Implicit selections are cleared afterwards and cursor is set to the
- original position. */
+ // Implicit selections are cleared afterwards
+ //and cursor is set to the original position.
if (implicitSelection) {
- ClearSelection(bview);
+ clearSelection();
cursor = resetCursor;
- SetCursor(bview, cursor.par(), cursor.pos());
- sel_cursor = cursor;
+ setCursor(bview, cursor.par(), cursor.pos());
+ selection.cursor = cursor;
}
if (inset_owner)
- inset_owner->SetUpdateStatus(bview, InsetText::CURSOR_PAR);
+ inset_owner->setUpdateStatus(bview, InsetText::CURSOR_PAR);
}
-LyXParagraph::size_type
-LyXText::BeginningOfMainBody(Buffer const * buf,
- LyXParagraph const * par) const
+string
+LyXText::getStringToIndex(BufferView * bview)
+{
+ string idxstring;
+
+ // Try implicit word selection
+ // If there is a change in the language the implicit word selection
+ // is disabled.
+ LyXCursor resetCursor = cursor;
+ bool implicitSelection = selectWordWhenUnderCursor(bview, PREVIOUS_WORD);
+
+ if (!selection.set()) {
+ bview->owner()->message(_("Nothing to index!"));
+ return string();
+ }
+ if (selection.start.par() != selection.end.par()) {
+ bview->owner()->message(_("Cannot index more than one paragraph!"));
+ return string();
+ }
+
+ idxstring = selectionAsString(bview->buffer());
+
+ // Implicit selections are cleared afterwards
+ //and cursor is set to the original position.
+ if (implicitSelection) {
+ clearSelection();
+ cursor = resetCursor;
+ setCursor(bview, cursor.par(), cursor.pos());
+ selection.cursor = cursor;
+ }
+ return idxstring;
+}
+
+Paragraph::size_type
+LyXText::beginningOfMainBody(Buffer const * buf,
+ Paragraph const * par) const
{
if (textclasslist.Style(buf->params.textclass,
- par->GetLayout()).labeltype != LABEL_MANUAL)
+ par->getLayout()).labeltype != LABEL_MANUAL)
return 0;
else
- return par->BeginningOfMainBody();
+ return par->beginningOfMainBody();
}
* they do not duplicate themself and you cannnot make dirty things with
* them! */
-void LyXText::SetParagraph(BufferView * bview,
+void LyXText::setParagraph(BufferView * bview,
bool line_top, bool line_bottom,
bool pagebreak_top, bool pagebreak_bottom,
VSpace const & space_top,
bool noindent)
{
LyXCursor tmpcursor = cursor;
- if (!selection) {
- sel_start_cursor = cursor;
- sel_end_cursor = cursor;
+ if (!selection.set()) {
+ selection.start = cursor;
+ selection.end = cursor;
}
// make sure that the depth behind the selection are restored, too
- LyXParagraph * endpar = sel_end_cursor.par()->next();
- LyXParagraph * undoendpar = endpar;
+ Paragraph * endpar = selection.end.par()->next();
+ Paragraph * undoendpar = endpar;
- if (endpar && endpar->GetDepth()) {
- while (endpar && endpar->GetDepth()) {
+ if (endpar && endpar->getDepth()) {
+ while (endpar && endpar->getDepth()) {
endpar = endpar->next();
undoendpar = endpar;
}
}
else if (endpar) {
- endpar = endpar->next(); // because of parindents etc.
+ // because of parindents etc.
+ endpar = endpar->next();
}
- SetUndo(bview->buffer(), Undo::EDIT,
- sel_start_cursor.par()->previous(),
- undoendpar);
+ setUndo(bview, Undo::EDIT, selection.start.par(), undoendpar);
- LyXParagraph * tmppar = sel_end_cursor.par();
- while (tmppar != sel_start_cursor.par()->previous()) {
- SetCursor(bview, tmppar, 0);
- status = LyXText::NEED_MORE_REFRESH;
+ Paragraph * tmppar = selection.end.par();
+ while (tmppar != selection.start.par()->previous()) {
+ setCursor(bview, tmppar, 0);
+ status(bview, LyXText::NEED_MORE_REFRESH);
refresh_row = cursor.row();
refresh_y = cursor.y() - cursor.row()->baseline();
- cursor.par()->params.lineTop(line_top);
- cursor.par()->params.lineBottom(line_bottom);
- cursor.par()->params.pagebreakTop(pagebreak_top);
- cursor.par()->params.pagebreakBottom(pagebreak_bottom);
- cursor.par()->params.spaceTop(space_top);
- cursor.par()->params.spaceBottom(space_bottom);
- // does the layout allow the new alignment?
- if (align == LYX_ALIGN_LAYOUT)
- align = textclasslist
- .Style(bview->buffer()->params.textclass,
- cursor.par()->GetLayout()).align;
- if (align & textclasslist
+ cursor.par()->params().lineTop(line_top);
+ cursor.par()->params().lineBottom(line_bottom);
+ cursor.par()->params().pagebreakTop(pagebreak_top);
+ cursor.par()->params().pagebreakBottom(pagebreak_bottom);
+ cursor.par()->params().spaceTop(space_top);
+ cursor.par()->params().spaceBottom(space_bottom);
+ // does the layout allow the new alignment?
+ if (align == LYX_ALIGN_LAYOUT)
+ align = textclasslist
+ .Style(bview->buffer()->params.textclass,
+ cursor.par()->getLayout()).align;
+ if (align & textclasslist
+ .Style(bview->buffer()->params.textclass,
+ cursor.par()->getLayout()).alignpossible) {
+ if (align == textclasslist
.Style(bview->buffer()->params.textclass,
- cursor.par()->GetLayout()).alignpossible) {
- if (align == textclasslist
- .Style(bview->buffer()->params.textclass,
- cursor.par()->GetLayout()).align)
- cursor.par()->params.align(LYX_ALIGN_LAYOUT);
- else
- cursor.par()->params.align(align);
- }
- cursor.par()->SetLabelWidthString(labelwidthstring);
- cursor.par()->params.noindent(noindent);
+ cursor.par()->getLayout()).align)
+ cursor.par()->params().align(LYX_ALIGN_LAYOUT);
+ else
+ cursor.par()->params().align(align);
+ }
+ cursor.par()->setLabelWidthString(labelwidthstring);
+ cursor.par()->params().noindent(noindent);
tmppar = cursor.par()->previous();
}
- RedoParagraphs(bview, sel_start_cursor, endpar);
+ redoParagraphs(bview, selection.start, endpar);
- ClearSelection(bview);
- SetCursor(bview, sel_start_cursor.par(), sel_start_cursor.pos());
- sel_cursor = cursor;
- SetCursor(bview, sel_end_cursor.par(), sel_end_cursor.pos());
- SetSelection(bview);
- SetCursor(bview, tmpcursor.par(), tmpcursor.pos());
+ clearSelection();
+ setCursor(bview, selection.start.par(), selection.start.pos());
+ selection.cursor = cursor;
+ setCursor(bview, selection.end.par(), selection.end.pos());
+ setSelection(bview);
+ setCursor(bview, tmpcursor.par(), tmpcursor.pos());
if (inset_owner)
- bview->updateInset(inset_owner, true);
+ bview->updateInset(inset_owner, true);
}
// set the counter of a paragraph. This includes the labels
-void LyXText::SetCounter(Buffer const * buf, LyXParagraph * par) const
+void LyXText::setCounter(Buffer const * buf, Paragraph * par) const
{
LyXLayout const & layout =
textclasslist.Style(buf->params.textclass,
- par->GetLayout());
+ par->getLayout());
LyXTextClass const & textclass =
textclasslist.TextClass(buf->params.textclass);
- /* copy the prev-counters to this one, unless this is the start of a
- footnote or of a bibliography or the very first paragraph */
- if (par->previous()
- && !(textclasslist.Style(buf->params.textclass,
- par->previous()->GetLayout()
- ).labeltype != LABEL_BIBLIO
- && layout.labeltype == LABEL_BIBLIO)) {
+ // copy the prev-counters to this one,
+ // unless this is the first paragraph
+ if (par->previous()) {
for (int i = 0; i < 10; ++i) {
- par->setCounter(i, par->previous()->GetFirstCounter(i));
+ par->setCounter(i, par->previous()->getFirstCounter(i));
}
- par->params.appendix(par->previous()->params.appendix());
- if (!par->params.appendix() && par->params.startOfAppendix()) {
- par->params.appendix(true);
- for (int i = 0; i < 10; ++i) {
- par->setCounter(i, 0);
- }
+ par->params().appendix(par->previous()->params().appendix());
+ if (!par->params().appendix() && par->params().startOfAppendix()) {
+ par->params().appendix(true);
+ for (int i = 0; i < 10; ++i) {
+ par->setCounter(i, 0);
+ }
}
par->enumdepth = par->previous()->enumdepth;
par->itemdepth = par->previous()->itemdepth;
for (int i = 0; i < 10; ++i) {
par->setCounter(i, 0);
}
- par->params.appendix(par->params.startOfAppendix());
+ par->params().appendix(par->params().startOfAppendix());
par->enumdepth = 0;
par->itemdepth = 0;
}
* are always of depth 0
*/
if (par->previous()
- && par->previous()->GetDepth() < par->GetDepth()
+ && par->previous()->getDepth() < par->getDepth()
&& textclasslist.Style(buf->params.textclass,
- par->previous()->GetLayout()
- ).labeltype == LABEL_COUNTER_ENUMI
+ par->previous()->getLayout()
+ ).labeltype == LABEL_COUNTER_ENUMI
&& par->enumdepth < 3
&& layout.labeltype != LABEL_BIBLIO) {
par->enumdepth++;
}
- /* Maybe we have to decrement the enumeration depth, see note above */
+ // Maybe we have to decrement the enumeration depth, see note above
if (par->previous()
- && par->previous()->GetDepth() > par->GetDepth()
+ && par->previous()->getDepth() > par->getDepth()
&& layout.labeltype != LABEL_BIBLIO) {
- par->enumdepth = par->DepthHook(par->GetDepth())->enumdepth;
+ par->enumdepth = par->depthHook(par->getDepth())->enumdepth;
par->setCounter(6 + par->enumdepth,
- par->DepthHook(par->GetDepth())->getCounter(6 + par->enumdepth));
+ par->depthHook(par->getDepth())->getCounter(6 + par->enumdepth));
/* reset the counters.
* A depth change is like a breaking layout
*/
par->setCounter(i, 0);
}
- if (!par->params.labelString().empty()) {
- par->params.labelString(string());
+ if (!par->params().labelString().empty()) {
+ par->params().labelString(string());
}
if (layout.margintype == MARGIN_MANUAL) {
- if (par->params.labelWidthString().empty()) {
- par->SetLabelWidthString(layout.labelstring());
+ if (par->params().labelWidthString().empty()) {
+ par->setLabelWidthString(layout.labelstring());
}
} else {
- par->SetLabelWidthString(string());
+ par->setLabelWidthString(string());
}
- /* is it a layout that has an automatic label ? */
+ // is it a layout that has an automatic label?
if (layout.labeltype >= LABEL_COUNTER_CHAPTER) {
int i = layout.labeltype - LABEL_COUNTER_CHAPTER;
par->incCounter(i); // increment the counter
// Is there a label? Useful for Chapter layout
- if (!par->params.appendix()) {
+ if (!par->params().appendix()) {
if (!layout.labelstring().empty())
- par->params.labelString(layout.labelstring());
+ par->params().labelString(layout.labelstring());
else
- par->params.labelString(string());
+ par->params().labelString(string());
} else {
if (!layout.labelstring_appendix().empty())
- par->params.labelString(layout.labelstring_appendix());
+ par->params().labelString(layout.labelstring_appendix());
else
- par->params.labelString(string());
+ par->params().labelString(string());
}
- std::ostringstream s;
+ ostringstream s;
- if (!par->params.appendix()) {
+ if (!par->params().appendix()) {
switch (2 * LABEL_COUNTER_CHAPTER -
textclass.maxcounter() + i) {
case LABEL_COUNTER_CHAPTER:
break;
case LABEL_COUNTER_SECTION:
s << par->getCounter(i - 1) << '.'
- << par->getCounter(i);
+ << par->getCounter(i);
break;
case LABEL_COUNTER_SUBSECTION:
s << par->getCounter(i - 2) << '.'
}
}
- par->params.labelString(par->params.labelString() +s.str().c_str());
+ par->params().labelString(par->params().labelString() +s.str().c_str());
// We really want to remove the c_str as soon as
// possible...
par->incCounter(i + par->enumdepth);
int number = par->getCounter(i + par->enumdepth);
- std::ostringstream s;
+ ostringstream s;
switch (par->enumdepth) {
case 1:
break;
}
- par->params.labelString(s.str().c_str());
- // we really want to get rid of that c_str()
+ par->params().labelString(s.str().c_str());
- for (i += par->enumdepth + 1; i < 10; ++i)
- par->setCounter(i, 0); /* reset the following counters */
-
+ for (i += par->enumdepth + 1; i < 10; ++i) {
+ // reset the following counters
+ par->setCounter(i, 0);
+ }
+
}
} else if (layout.labeltype == LABEL_BIBLIO) {// ale970302
int i = LABEL_COUNTER_ENUMI - LABEL_COUNTER_CHAPTER + par->enumdepth;
par->bibkey = new InsetBibKey(p);
}
par->bibkey->setCounter(number);
- par->params.labelString(layout.labelstring());
+ par->params().labelString(layout.labelstring());
// In biblio should't be following counters but...
} else {
// the caption hack:
if (layout.labeltype == LABEL_SENSITIVE) {
- bool isOK (par->InInset() && par->InInset()->owner() &&
- (par->InInset()->owner()->LyxCode() == Inset::FLOAT_CODE));
+ bool isOK (par->inInset() && par->inInset()->owner() &&
+ (par->inInset()->owner()->lyxCode() == Inset::FLOAT_CODE));
+
if (isOK) {
- InsetFloat * tmp = static_cast<InsetFloat*>(par->InInset()->owner());
+ InsetFloat * tmp = static_cast<InsetFloat*>(par->inInset()->owner());
Floating const & fl
= floatList.getType(tmp->type());
// We should get the correct number here too.
? " :úåòîùî øñç" : "Senseless: ";
}
}
- par->params.labelString(s);
+ par->params().labelString(s);
/* reset the enumeration counter. They are always resetted
* when there is any other layout between */
}
-/* Updates all counters BEHIND the row. Changed paragraphs
-* with a dynamic left margin will be rebroken. */
-void LyXText::UpdateCounters(BufferView * bview, Row * row) const
+// Updates all counters BEHIND the row. Changed paragraphs
+// with a dynamic left margin will be rebroken.
+void LyXText::updateCounters(BufferView * bview, Row * row) const
{
- LyXParagraph * par;
+ Paragraph * par;
if (!row) {
row = firstrow;
while (row->par() != par)
row = row->next();
- SetCounter(bview->buffer(), par);
+ setCounter(bview->buffer(), par);
- /* now check for the headline layouts. remember that they
- * have a dynamic left margin */
+ // now check for the headline layouts. remember that they
+ // have a dynamic left margin
if ((textclasslist.Style(bview->buffer()->params.textclass,
par->layout).margintype == MARGIN_DYNAMIC
|| textclasslist.Style(bview->buffer()->params.textclass,
par->layout).labeltype == LABEL_SENSITIVE)) {
- /* Rebreak the paragraph */
- RemoveParagraph(row);
- AppendParagraph(bview, row);
+ // Rebreak the paragraph
+ removeParagraph(row);
+ appendParagraph(bview, row);
}
par = par->next();
}
}
-/* insets an inset. */
-void LyXText::InsertInset(BufferView * bview, Inset * inset)
+void LyXText::insertInset(BufferView * bview, Inset * inset)
{
- if (!cursor.par()->InsertInsetAllowed(inset))
+ if (!cursor.par()->insetAllowed(inset->lyxCode()))
return;
- SetUndo(bview->buffer(), Undo::INSERT,
- cursor.par()->previous(),
- cursor.par()->next());
- cursor.par()->InsertInset(cursor.pos(), inset);
- InsertChar(bview, LyXParagraph::META_INSET); /* just to rebreak and refresh correctly.
- * The character will not be inserted a
- * second time */
+ setUndo(bview, Undo::INSERT,
+ cursor.par(), cursor.par()->next());
+ cursor.par()->insertInset(cursor.pos(), inset);
+ // Just to rebreak and refresh correctly.
+ // The character will not be inserted a second time
+ insertChar(bview, Paragraph::META_INSET);
#if 1
// If we enter a highly editable inset the cursor should be to before
// the inset. This couldn't happen before as Undo was not handled inside
// inset now after the Undo LyX tries to call inset->Edit(...) again
// and cannot do this as the cursor is behind the inset and GetInset
// does not return the inset!
- if (inset->Editable() == Inset::HIGHLY_EDITABLE) {
- CursorLeft(bview, true);
+ if (inset->editable() == Inset::HIGHLY_EDITABLE) {
+ cursorLeft(bview, true);
}
#endif
}
void LyXText::copyEnvironmentType()
{
- copylayouttype = cursor.par()->GetLayout();
+ copylayouttype = cursor.par()->getLayout();
}
void LyXText::pasteEnvironmentType(BufferView * bview)
{
- SetLayout(bview, copylayouttype);
+ setLayout(bview, copylayouttype);
}
-void LyXText::CutSelection(BufferView * bview, bool doclear)
+void LyXText::cutSelection(BufferView * bview, bool doclear, bool realcut)
{
// Stuff what we got on the clipboard. Even if there is no selection.
bview->stuffClipboard(selectionAsString(bview->buffer()));
// This doesn't make sense, if there is no selection
- if (!selection)
+ if (!selection.set())
return;
- // OK, we have a selection. This is always between sel_start_cursor
- // and sel_end_cursor
+ // OK, we have a selection. This is always between selection.start
+ // and selection.end
// make sure that the depth behind the selection are restored, too
- LyXParagraph * endpar = sel_end_cursor.par()->next();
- LyXParagraph * undoendpar = endpar;
+ Paragraph * endpar = selection.end.par()->next();
+ Paragraph * undoendpar = endpar;
- if (endpar && endpar->GetDepth()) {
- while (endpar && endpar->GetDepth()) {
+ if (endpar && endpar->getDepth()) {
+ while (endpar && endpar->getDepth()) {
endpar = endpar->next();
undoendpar = endpar;
}
endpar = endpar->next(); // because of parindents etc.
}
- SetUndo(bview->buffer(), Undo::DELETE,
- sel_start_cursor.par()->previous(),
- undoendpar);
+ setUndo(bview, Undo::DELETE,
+ selection.start.par(), undoendpar);
- CutAndPaste cap;
-
// there are two cases: cut only within one paragraph or
// more than one paragraph
- if (sel_start_cursor.par() == sel_end_cursor.par()) {
+ if (selection.start.par() == selection.end.par()) {
// only within one paragraph
- endpar = sel_start_cursor.par();
- int pos = sel_end_cursor.pos();
- cap.cutSelection(sel_start_cursor.par(), &endpar,
- sel_start_cursor.pos(), pos,
- bview->buffer()->params.textclass, doclear);
- sel_end_cursor.pos(pos);
+ endpar = selection.end.par();
+ int pos = selection.end.pos();
+ CutAndPaste::cutSelection(selection.start.par(), &endpar,
+ selection.start.pos(), pos,
+ bview->buffer()->params.textclass, doclear,
+ realcut);
+ selection.end.pos(pos);
} else {
- endpar = sel_end_cursor.par();
-
- int pos = sel_end_cursor.pos();
- cap.cutSelection(sel_start_cursor.par(), &endpar,
- sel_start_cursor.pos(), pos,
- bview->buffer()->params.textclass, doclear);
+ endpar = selection.end.par();
+ int pos = selection.end.pos();
+ CutAndPaste::cutSelection(selection.start.par(), &endpar,
+ selection.start.pos(), pos,
+ bview->buffer()->params.textclass, doclear,
+ realcut);
cursor.par(endpar);
- sel_end_cursor.par(endpar);
- sel_end_cursor.pos(pos);
- cursor.pos(sel_end_cursor.pos());
+ selection.end.par(endpar);
+ selection.end.pos(pos);
+ cursor.pos(selection.end.pos());
}
endpar = endpar->next();
// sometimes necessary
if (doclear)
- sel_start_cursor.par()->StripLeadingSpaces(bview->buffer()->params.textclass);
+ selection.start.par()->stripLeadingSpaces(bview->buffer()->params.textclass);
- RedoParagraphs(bview, sel_start_cursor, endpar);
-
- ClearSelection(bview);
- cursor = sel_start_cursor;
- SetCursor(bview, cursor.par(), cursor.pos());
- sel_cursor = cursor;
- UpdateCounters(bview, cursor.row());
+ redoParagraphs(bview, selection.start, endpar);
+
+ // cutSelection can invalidate the cursor so we need to set
+ // it anew. (Lgb)
+ cursor = selection.start;
+
+ // need a valid cursor. (Lgb)
+ clearSelection();
+
+ setCursor(bview, cursor.par(), cursor.pos());
+ selection.cursor = cursor;
+ updateCounters(bview, cursor.row());
}
-void LyXText::CopySelection(BufferView * bview)
+void LyXText::copySelection(BufferView * bview)
{
// Stuff what we got on the clipboard. Even if there is no selection.
bview->stuffClipboard(selectionAsString(bview->buffer()));
// this doesnt make sense, if there is no selection
- if (!selection)
+ if (!selection.set())
return;
- // ok we have a selection. This is always between sel_start_cursor
+ // ok we have a selection. This is always between selection.start
// and sel_end cursor
// copy behind a space if there is one
- while (sel_start_cursor.par()->size() > sel_start_cursor.pos()
- && sel_start_cursor.par()->IsLineSeparator(sel_start_cursor.pos())
- && (sel_start_cursor.par() != sel_end_cursor.par()
- || sel_start_cursor.pos() < sel_end_cursor.pos()))
- sel_start_cursor.pos(sel_start_cursor.pos() + 1);
-
- CutAndPaste cap;
+ while (selection.start.par()->size() > selection.start.pos()
+ && selection.start.par()->isLineSeparator(selection.start.pos())
+ && (selection.start.par() != selection.end.par()
+ || selection.start.pos() < selection.end.pos()))
+ selection.start.pos(selection.start.pos() + 1);
- cap.copySelection(sel_start_cursor.par(), sel_end_cursor.par(),
- sel_start_cursor.pos(), sel_end_cursor.pos(),
- bview->buffer()->params.textclass);
+ CutAndPaste::copySelection(selection.start.par(), selection.end.par(),
+ selection.start.pos(), selection.end.pos(),
+ bview->buffer()->params.textclass);
}
-void LyXText::PasteSelection(BufferView * bview)
+void LyXText::pasteSelection(BufferView * bview)
{
- CutAndPaste cap;
-
// this does not make sense, if there is nothing to paste
- if (!cap.checkPastePossible(cursor.par()))
+ if (!CutAndPaste::checkPastePossible(cursor.par()))
return;
- SetUndo(bview->buffer(), Undo::INSERT,
- cursor.par()->previous(),
- cursor.par()->next());
+ setUndo(bview, Undo::INSERT,
+ cursor.par(), cursor.par()->next());
- LyXParagraph * endpar;
- LyXParagraph * actpar = cursor.par();
+ Paragraph * endpar;
+ Paragraph * actpar = cursor.par();
int pos = cursor.pos();
- cap.pasteSelection(&actpar, &endpar, pos,
- bview->buffer()->params.textclass);
+ CutAndPaste::pasteSelection(&actpar, &endpar, pos,
+ bview->buffer()->params.textclass);
- RedoParagraphs(bview, cursor, endpar);
+ redoParagraphs(bview, cursor, endpar);
- SetCursor(bview, cursor.par(), cursor.pos());
- ClearSelection(bview);
+ setCursor(bview, cursor.par(), cursor.pos());
+ clearSelection();
- sel_cursor = cursor;
- SetCursor(bview, actpar, pos);
- SetSelection(bview);
- UpdateCounters(bview, cursor.row());
+ selection.cursor = cursor;
+ setCursor(bview, actpar, pos);
+ setSelection(bview);
+ updateCounters(bview, cursor.row());
}
-// returns a pointer to the very first LyXParagraph
-LyXParagraph * LyXText::FirstParagraph() const
+// returns a pointer to the very first Paragraph
+Paragraph * LyXText::firstParagraph() const
{
- return OwnerParagraph();
+ return ownerParagraph();
}
// sets the selection over the number of characters of string, no check!!
-void LyXText::SetSelectionOverString(BufferView * bview, string const & str)
+void LyXText::setSelectionOverString(BufferView * bview, string const & str)
{
- sel_cursor = cursor;
- for (int i = 0; str[i]; ++i)
- CursorRight(bview);
- SetSelection(bview);
+ if (str.empty())
+ return;
+
+ selection.cursor = cursor;
+ for (string::size_type i = 0; i < str.length(); ++i)
+ cursorRight(bview);
+ setSelection(bview);
}
// simple replacing. The font of the first selected character is used
-void LyXText::ReplaceSelectionWithString(BufferView * bview,
+void LyXText::replaceSelectionWithString(BufferView * bview,
string const & str)
{
- SetCursorParUndo(bview->buffer());
- FreezeUndo();
+ setCursorParUndo(bview);
+ freezeUndo();
- if (!selection) { // create a dummy selection
- sel_end_cursor = cursor;
- sel_start_cursor = cursor;
+ if (!selection.set()) { // create a dummy selection
+ selection.end = cursor;
+ selection.start = cursor;
}
// Get font setting before we cut
- LyXParagraph::size_type pos = sel_end_cursor.pos();
- LyXFont const font = sel_start_cursor.par()
- ->GetFontSettings(bview->buffer()->params,
- sel_start_cursor.pos());
+ Paragraph::size_type pos = selection.end.pos();
+ LyXFont const font = selection.start.par()
+ ->getFontSettings(bview->buffer()->params,
+ selection.start.pos());
// Insert the new string
for (string::const_iterator cit = str.begin(); cit != str.end(); ++cit) {
- sel_end_cursor.par()->InsertChar(pos, (*cit), font);
+ selection.end.par()->insertChar(pos, (*cit), font);
++pos;
}
// Cut the selection
- CutSelection(bview);
+ cutSelection(bview, true, false);
- UnFreezeUndo();
+ unFreezeUndo();
}
// needed to insert the selection
-void LyXText::InsertStringA(BufferView * bview, string const & str)
+void LyXText::insertStringAsLines(BufferView * bview, string const & str)
{
- LyXParagraph * par = cursor.par();
- LyXParagraph::size_type pos = cursor.pos();
- LyXParagraph::size_type a = 0;
- LyXParagraph * endpar = cursor.par()->next();
+ Paragraph * par = cursor.par();
+ Paragraph::size_type pos = cursor.pos();
+ Paragraph * endpar = cursor.par()->next();
- SetCursorParUndo(bview->buffer());
+ setCursorParUndo(bview);
- bool flag =
- textclasslist.Style(bview->buffer()->params.textclass,
- cursor.par()->GetLayout()).isEnvironment();
// only to be sure, should not be neccessary
- ClearSelection(bview);
+ clearSelection();
- // insert the string, don't insert doublespace
- string::size_type i = 0;
- while (i < str.length()) {
- if (str[i] != '\n') {
- if (str[i] == ' '
- && i + 1 < str.length() && str[i + 1] != ' '
- && pos && par->GetChar(pos - 1)!= ' ') {
- par->InsertChar(pos, ' ', current_font);
- ++pos;
- } else if (str[i] == ' ') {
- InsetSpecialChar * new_inset =
- new InsetSpecialChar(InsetSpecialChar::PROTECTED_SEPARATOR);
- if (par->InsertInsetAllowed(new_inset)) {
- par->InsertInset(pos, new_inset,
- current_font);
- } else {
- delete new_inset;
- }
- ++pos;
- } else if (str[i] == '\t') {
- for (a = pos; a < (pos / 8 + 1) * 8 ; ++a) {
- InsetSpecialChar * new_inset =
- new InsetSpecialChar(InsetSpecialChar::PROTECTED_SEPARATOR);
- if (par->InsertInsetAllowed(new_inset)) {
- par->InsertInset(pos, new_inset,
- current_font);
- } else {
- delete new_inset;
- }
- }
- pos = a;
- } else if (str[i] != 13 &&
- // Ignore unprintables
- (str[i] & 127) >= ' ') {
- par->InsertChar(pos, str[i], current_font);
- ++pos;
- }
- } else {
- if (!par->size()) { // par is empty
- InsetSpecialChar * new_inset =
- new InsetSpecialChar(InsetSpecialChar::PROTECTED_SEPARATOR);
- if (par->InsertInsetAllowed(new_inset)) {
- par->InsertInset(pos,
- new_inset,
- current_font);
- } else {
- delete new_inset;
- }
- ++pos;
- }
- par->BreakParagraph(bview->buffer()->params, pos, flag);
- par = par->next();
- pos = 0;
- }
- ++i;
- }
-
- RedoParagraphs(bview, cursor, endpar);
- SetCursor(bview, cursor.par(), cursor.pos());
- sel_cursor = cursor;
- SetCursor(bview, par, pos);
- SetSelection(bview);
-}
-
-
-/* turns double-CR to single CR, others where converted into one blank and 13s
- * that are ignored .Double spaces are also converted into one. Spaces at
- * the beginning of a paragraph are forbidden. tabs are converted into one
- * space. then InsertStringA is called */
-void LyXText::InsertStringB(BufferView * bview, string const & s)
-{
- string str(s);
- string::size_type i = 1;
- while (i < str.length()) {
- if (str[i] == '\t')
- str[i] = ' ';
- if (str[i] == ' ' && i + 1 < str.length() && str[i + 1] == ' ')
- str[i] = 13;
- if (str[i] == '\n' && i + 1 < str.length()) {
- if (str[i + 1] != '\n') {
- if (str[i - 1] != ' ')
- str[i] = ' ';
- else
- str[i] = 13;
- }
- while (i + 1 < str.length()
- && (str[i + 1] == ' '
- || str[i + 1] == '\t'
- || str[i + 1] == '\n'
- || str[i + 1] == 13)) {
- str[i + 1] = 13;
- ++i;
- }
+ bview->buffer()->insertStringAsLines(par, pos, current_font, str);
+
+ redoParagraphs(bview, cursor, endpar);
+ setCursor(bview, cursor.par(), cursor.pos());
+ selection.cursor = cursor;
+ setCursor(bview, par, pos);
+ setSelection(bview);
+}
+
+
+// turns double-CR to single CR, others where converted into one
+// blank. Then InsertStringAsLines is called
+void LyXText::insertStringAsParagraphs(BufferView * bview, string const & str)
+{
+ string linestr(str);
+ bool newline_inserted = false;
+ for (string::size_type i = 0; i < linestr.length(); ++i) {
+ if (linestr[i] == '\n') {
+ if (newline_inserted) {
+ // we know that \r will be ignored by
+ // InsertStringA. Of course, it is a dirty
+ // trick, but it works...
+ linestr[i - 1] = '\r';
+ linestr[i] = '\n';
+ } else {
+ linestr[i] = ' ';
+ newline_inserted = true;
+ }
+ } else if (IsPrintable(linestr[i])) {
+ newline_inserted = false;
}
- ++i;
}
- InsertStringA(bview, str);
+ insertStringAsLines(bview, linestr);
}
-bool LyXText::GotoNextInset(BufferView * bview,
+bool LyXText::gotoNextInset(BufferView * bview,
std::vector<Inset::Code> const & codes,
string const & contents) const
{
}
} while (res.par() &&
- !(res.par()->GetChar(res.pos()) == LyXParagraph::META_INSET
- && (inset = res.par()->GetInset(res.pos())) != 0
- && find(codes.begin(), codes.end(), inset->LyxCode())
- != codes.end()
+ !(res.par()->getChar(res.pos()) == Paragraph::META_INSET
+ && (inset = res.par()->getInset(res.pos())) != 0
+ && find(codes.begin(), codes.end(), inset->lyxCode())
+ != codes.end()
&& (contents.empty() ||
- static_cast<InsetCommand *>(res.par()->GetInset(res.pos()))->getContents()
+ static_cast<InsetCommand *>(res.par()->getInset(res.pos()))->getContents()
== contents)));
if (res.par()) {
- SetCursor(bview, res.par(), res.pos());
+ setCursor(bview, res.par(), res.pos());
return true;
}
return false;
}
-void LyXText::CheckParagraph(BufferView * bview, LyXParagraph * par,
- LyXParagraph::size_type pos)
+void LyXText::checkParagraph(BufferView * bview, Paragraph * par,
+ Paragraph::size_type pos)
{
LyXCursor tmpcursor;
int y = 0;
- LyXParagraph::size_type z;
- Row * row = GetRow(par, pos, y);
+ Paragraph::size_type z;
+ Row * row = getRow(par, pos, y);
// is there a break one row above
if (row->previous() && row->previous()->par() == row->par()) {
- z = NextBreakPoint(bview, row->previous(), workWidth(bview));
+ z = nextBreakPoint(bview, row->previous(), workWidth(bview));
if (z >= row->pos()) {
// set the dimensions of the row above
y -= row->previous()->height();
refresh_y = y;
refresh_row = row->previous();
- status = LyXText::NEED_MORE_REFRESH;
+ status(bview, LyXText::NEED_MORE_REFRESH);
- BreakAgain(bview, row->previous());
+ breakAgain(bview, row->previous());
// set the cursor again. Otherwise
// dangling pointers are possible
- SetCursor(bview, cursor.par(), cursor.pos(),
+ setCursor(bview, cursor.par(), cursor.pos(),
false, cursor.boundary());
- sel_cursor = cursor;
+ selection.cursor = cursor;
return;
}
}
int const tmpheight = row->height();
- LyXParagraph::size_type const tmplast = RowLast(row);
+ Paragraph::size_type const tmplast = rowLast(row);
refresh_y = y;
refresh_row = row;
- BreakAgain(bview, row);
- if (row->height() == tmpheight && RowLast(row) == tmplast)
- status = LyXText::NEED_VERY_LITTLE_REFRESH;
+ breakAgain(bview, row);
+ if (row->height() == tmpheight && rowLast(row) == tmplast)
+ status(bview, LyXText::NEED_VERY_LITTLE_REFRESH);
else
- status = LyXText::NEED_MORE_REFRESH;
+ status(bview, LyXText::NEED_MORE_REFRESH);
// check the special right address boxes
if (textclasslist.Style(bview->buffer()->params.textclass,
- par->GetLayout()).margintype
+ par->getLayout()).margintype
== MARGIN_RIGHT_ADDRESS_BOX) {
tmpcursor.par(par);
tmpcursor.row(row);
tmpcursor.x(0);
tmpcursor.x_fix(0);
tmpcursor.pos(pos);
- RedoDrawingOfParagraph(bview, tmpcursor);
+ redoDrawingOfParagraph(bview, tmpcursor);
}
// set the cursor again. Otherwise dangling pointers are possible
// also set the selection
- if (selection) {
+ if (selection.set()) {
tmpcursor = cursor;
- SetCursorIntern(bview, sel_cursor.par(), sel_cursor.pos(),
- false, sel_cursor.boundary());
- sel_cursor = cursor;
- SetCursorIntern(bview, sel_start_cursor.par(),
- sel_start_cursor.pos(),
- false, sel_start_cursor.boundary());
- sel_start_cursor = cursor;
- SetCursorIntern(bview, sel_end_cursor.par(),
- sel_end_cursor.pos(),
- false, sel_end_cursor.boundary());
- sel_end_cursor = cursor;
- SetCursorIntern(bview, last_sel_cursor.par(),
+ setCursorIntern(bview, selection.cursor.par(), selection.cursor.pos(),
+ false, selection.cursor.boundary());
+ selection.cursor = cursor;
+ setCursorIntern(bview, selection.start.par(),
+ selection.start.pos(),
+ false, selection.start.boundary());
+ selection.start = cursor;
+ setCursorIntern(bview, selection.end.par(),
+ selection.end.pos(),
+ false, selection.end.boundary());
+ selection.end = cursor;
+ setCursorIntern(bview, last_sel_cursor.par(),
last_sel_cursor.pos(),
false, last_sel_cursor.boundary());
last_sel_cursor = cursor;
cursor = tmpcursor;
}
- SetCursorIntern(bview, cursor.par(), cursor.pos(),
+ setCursorIntern(bview, cursor.par(), cursor.pos(),
false, cursor.boundary());
}
// returns false if inset wasn't found
-bool LyXText::UpdateInset(BufferView * bview, Inset * inset)
+bool LyXText::updateInset(BufferView * bview, Inset * inset)
{
// first check the current paragraph
- int pos = cursor.par()->GetPositionOfInset(inset);
+ int pos = cursor.par()->getPositionOfInset(inset);
if (pos != -1){
- CheckParagraph(bview, cursor.par(), pos);
+ checkParagraph(bview, cursor.par(), pos);
return true;
}
// check every paragraph
- LyXParagraph * par = FirstParagraph();
+ Paragraph * par = firstParagraph();
do {
- pos = par->GetPositionOfInset(inset);
- if (pos != -1){
- CheckParagraph(bview, par, pos);
- return true;
- }
+ pos = par->getPositionOfInset(inset);
+ if (pos != -1){
+ checkParagraph(bview, par, pos);
+ return true;
+ }
par = par->next();
} while (par);
}
-void LyXText::SetCursor(BufferView * bview, LyXParagraph * par,
- LyXParagraph::size_type pos,
- bool setfont, bool boundary) const
+void LyXText::setCursor(BufferView * bview, Paragraph * par,
+ Paragraph::size_type pos,
+ bool setfont, bool boundary) const
{
LyXCursor old_cursor = cursor;
- SetCursorIntern(bview, par, pos, setfont, boundary);
- DeleteEmptyParagraphMechanism(bview, old_cursor);
+ setCursorIntern(bview, par, pos, setfont, boundary);
+ deleteEmptyParagraphMechanism(bview, old_cursor);
}
-void LyXText::SetCursor(BufferView *bview, LyXCursor & cur, LyXParagraph * par,
- LyXParagraph::size_type pos, bool boundary) const
+void LyXText::setCursor(BufferView *bview, LyXCursor & cur, Paragraph * par,
+ Paragraph::size_type pos, bool boundary) const
{
cur.par(par);
cur.pos(pos);
cur.boundary(boundary);
- /* get the cursor y position in text */
+ // get the cursor y position in text
int y = 0;
- Row * row = GetRow(par, pos, y);
- /* y is now the beginning of the cursor row */
+ Row * row = getRow(par, pos, y);
+ // y is now the beginning of the cursor row
y += row->baseline();
- /* y is now the cursor baseline */
+ // y is now the cursor baseline
cur.y(y);
- /* now get the cursors x position */
+ // now get the cursors x position
float x;
- float fill_separator, fill_hfill, fill_label_hfill;
- PrepareToPrint(bview, row, x, fill_separator, fill_hfill,
+ float fill_separator;
+ float fill_hfill;
+ float fill_label_hfill;
+ prepareToPrint(bview, row, x, fill_separator, fill_hfill,
fill_label_hfill);
- LyXParagraph::size_type cursor_vpos = 0;
- LyXParagraph::size_type last = RowLastPrintable(row);
+ Paragraph::size_type cursor_vpos = 0;
+ Paragraph::size_type last = rowLastPrintable(row);
if (pos > last + 1) // This shouldn't happen.
pos = last + 1;
cursor_vpos = (bidi_level(pos) % 2 == 0)
? log2vis(pos) : log2vis(pos) + 1;
- LyXParagraph::size_type main_body =
- BeginningOfMainBody(bview->buffer(), row->par());
+ Paragraph::size_type main_body =
+ beginningOfMainBody(bview->buffer(), row->par());
if ((main_body > 0) &&
((main_body-1 > last) ||
- !row->par()->IsLineSeparator(main_body-1)))
+ !row->par()->isLineSeparator(main_body-1)))
main_body = 0;
- for (LyXParagraph::size_type vpos = row->pos();
+ for (Paragraph::size_type vpos = row->pos();
vpos < cursor_vpos; ++vpos) {
pos = vis2log(vpos);
if (main_body > 0 && pos == main_body - 1) {
x += fill_label_hfill +
lyxfont::width(textclasslist.Style(
bview->buffer()->params.textclass,
- row->par()->GetLayout())
+ row->par()->getLayout())
.labelsep,
- GetFont(bview->buffer(), row->par(), -2));
- if (row->par()->IsLineSeparator(main_body-1))
- x -= SingleWidth(bview, row->par(),main_body-1);
+ getLabelFont(bview->buffer(), row->par()));
+ if (row->par()->isLineSeparator(main_body-1))
+ x -= singleWidth(bview, row->par(),main_body-1);
}
- if (HfillExpansion(bview->buffer(), row, pos)) {
- x += SingleWidth(bview, row->par(), pos);
+ if (hfillExpansion(bview->buffer(), row, pos)) {
+ x += singleWidth(bview, row->par(), pos);
if (pos >= main_body)
x += fill_hfill;
else
x += fill_label_hfill;
- } else if (row->par()->IsSeparator(pos)) {
- x += SingleWidth(bview, row->par(), pos);
+ } else if (row->par()->isSeparator(pos)) {
+ x += singleWidth(bview, row->par(), pos);
if (pos >= main_body)
x += fill_separator;
} else
- x += SingleWidth(bview, row->par(), pos);
+ x += singleWidth(bview, row->par(), pos);
}
cur.x(int(x));
}
-void LyXText::SetCursorIntern(BufferView * bview, LyXParagraph * par,
- LyXParagraph::size_type pos,
+void LyXText::setCursorIntern(BufferView * bview, Paragraph * par,
+ Paragraph::size_type pos,
bool setfont, bool boundary) const
{
- SetCursor(bview, cursor, par, pos, boundary);
+ InsetText * it = static_cast<InsetText *>(par->inInset());
+ if (it) {
+ if (it != inset_owner) {
+ lyxerr << "InsetText is " << it << endl;
+ lyxerr << "inset_owner is " << inset_owner << endl;
+#warning I belive this code is wrong. (Lgb)
+#warning Jürgen, have a look at this. (Lgb)
+#warning Hmmm, I guess you are right but we
+#warning should verify when this is needed
+ // Jürgen, would you like to have a look?
+ // I guess we need to move the outer cursor
+ // and open and lock the inset (bla bla bla)
+ // stuff I don't know... so can you have a look?
+ // (Lgb)
+ // I moved the lyxerr stuff in here so we can see if this
+ // is actually really needed and where!
+ // (Jug)
+ it->getLyXText(bview)->setCursorIntern(bview, par, pos, setfont,
+ boundary);
+ return;
+ }
+ }
+
+ setCursor(bview, cursor, par, pos, boundary);
if (setfont)
- SetCurrentFont(bview);
+ setCurrentFont(bview);
}
-void LyXText::SetCurrentFont(BufferView * bview) const
+void LyXText::setCurrentFont(BufferView * bview) const
{
- LyXParagraph::size_type pos = cursor.pos();
+ Paragraph::size_type pos = cursor.pos();
if (cursor.boundary() && pos > 0)
--pos;
if (pos > 0) {
if (pos == cursor.par()->size())
--pos;
- else if (cursor.par()->IsSeparator(pos)) {
- if (pos > cursor.row()->pos() &&
- bidi_level(pos) % 2 ==
- bidi_level(pos - 1) % 2)
- --pos;
- else if (pos + 1 < cursor.par()->size())
- ++pos;
- }
+ else // potentional bug... BUG (Lgb)
+ if (cursor.par()->isSeparator(pos)) {
+ if (pos > cursor.row()->pos() &&
+ bidi_level(pos) % 2 ==
+ bidi_level(pos - 1) % 2)
+ --pos;
+ else if (pos + 1 < cursor.par()->size())
+ ++pos;
+ }
}
current_font =
- cursor.par()->GetFontSettings(bview->buffer()->params, pos);
- real_current_font = GetFont(bview->buffer(), cursor.par(), pos);
+ cursor.par()->getFontSettings(bview->buffer()->params, pos);
+ real_current_font = getFont(bview->buffer(), cursor.par(), pos);
if (cursor.pos() == cursor.par()->size() &&
- IsBoundary(bview->buffer(), cursor.par(), cursor.pos()) &&
+ isBoundary(bview->buffer(), cursor.par(), cursor.pos()) &&
!cursor.boundary()) {
Language const * lang =
cursor.par()->getParLanguage(bview->buffer()->params);
}
-void LyXText::SetCursorFromCoordinates(BufferView * bview, int x, int y) const
+void LyXText::setCursorFromCoordinates(BufferView * bview, int x, int y) const
{
LyXCursor old_cursor = cursor;
-
- /* get the row first */
-
- Row * row = GetRowNearY(y);
- cursor.par(row->par());
- bool bound = false;
- int column = GetColumnNearX(bview, row, x, bound);
- cursor.pos(row->pos() + column);
- cursor.x(x);
- cursor.y(y + row->baseline());
- cursor.row(row);
- cursor.boundary(bound);
- SetCurrentFont(bview);
- DeleteEmptyParagraphMechanism(bview, old_cursor);
+ setCursorFromCoordinates(bview, cursor, x, y);
+ setCurrentFont(bview);
+ deleteEmptyParagraphMechanism(bview, old_cursor);
}
-void LyXText::SetCursorFromCoordinates(BufferView * bview, LyXCursor & cur,
+void LyXText::setCursorFromCoordinates(BufferView * bview, LyXCursor & cur,
int x, int y) const
{
- /* get the row first */
+ // Get the row first.
- Row * row = GetRowNearY(y);
+ Row * row = getRowNearY(y);
bool bound = false;
- int column = GetColumnNearX(bview, row, x, bound);
+ int const column = getColumnNearX(bview, row, x, bound);
cur.par(row->par());
cur.pos(row->pos() + column);
}
-void LyXText::CursorLeft(BufferView * bview, bool internal) const
+void LyXText::cursorLeft(BufferView * bview, bool internal) const
{
if (cursor.pos() > 0) {
bool boundary = cursor.boundary();
- SetCursor(bview, cursor.par(), cursor.pos() - 1, true, false);
+ setCursor(bview, cursor.par(), cursor.pos() - 1, true, false);
if (!internal && !boundary &&
- IsBoundary(bview->buffer(), cursor.par(), cursor.pos() + 1))
- SetCursor(bview, cursor.par(), cursor.pos() + 1, true, true);
+ isBoundary(bview->buffer(), cursor.par(), cursor.pos() + 1))
+ setCursor(bview, cursor.par(), cursor.pos() + 1, true, true);
} else if (cursor.par()->previous()) { // steps into the above paragraph.
- LyXParagraph * par = cursor.par()->previous();
- SetCursor(bview, par, par->size());
+ Paragraph * par = cursor.par()->previous();
+ setCursor(bview, par, par->size());
}
}
-void LyXText::CursorRight(BufferView * bview, bool internal) const
+void LyXText::cursorRight(BufferView * bview, bool internal) const
{
if (!internal && cursor.boundary() &&
- !cursor.par()->IsNewline(cursor.pos()))
- SetCursor(bview, cursor.par(), cursor.pos(), true, false);
+ !cursor.par()->isNewline(cursor.pos()))
+ setCursor(bview, cursor.par(), cursor.pos(), true, false);
else if (cursor.pos() < cursor.par()->size()) {
- SetCursor(bview, cursor.par(), cursor.pos() + 1, true, false);
+ setCursor(bview, cursor.par(), cursor.pos() + 1, true, false);
if (!internal &&
- IsBoundary(bview->buffer(), cursor.par(), cursor.pos()))
- SetCursor(bview, cursor.par(), cursor.pos(), true, true);
+ isBoundary(bview->buffer(), cursor.par(), cursor.pos()))
+ setCursor(bview, cursor.par(), cursor.pos(), true, true);
} else if (cursor.par()->next())
- SetCursor(bview, cursor.par()->next(), 0);
+ setCursor(bview, cursor.par()->next(), 0);
}
-void LyXText::CursorUp(BufferView * bview) const
+void LyXText::cursorUp(BufferView * bview) const
{
- SetCursorFromCoordinates(bview, cursor.x_fix(),
+ setCursorFromCoordinates(bview, cursor.x_fix(),
cursor.y() - cursor.row()->baseline() - 1);
}
-void LyXText::CursorDown(BufferView * bview) const
+void LyXText::cursorDown(BufferView * bview) const
{
- SetCursorFromCoordinates(bview, cursor.x_fix(),
+ setCursorFromCoordinates(bview, cursor.x_fix(),
cursor.y() - cursor.row()->baseline()
+ cursor.row()->height() + 1);
}
-void LyXText::CursorUpParagraph(BufferView * bview) const
+void LyXText::cursorUpParagraph(BufferView * bview) const
{
if (cursor.pos() > 0) {
- SetCursor(bview, cursor.par(), 0);
+ setCursor(bview, cursor.par(), 0);
}
else if (cursor.par()->previous()) {
- SetCursor(bview, cursor.par()->previous(), 0);
+ setCursor(bview, cursor.par()->previous(), 0);
}
}
-void LyXText::CursorDownParagraph(BufferView * bview) const
+void LyXText::cursorDownParagraph(BufferView * bview) const
{
if (cursor.par()->next()) {
- SetCursor(bview, cursor.par()->next(), 0);
+ setCursor(bview, cursor.par()->next(), 0);
} else {
- SetCursor(bview, cursor.par(), cursor.par()->size());
+ setCursor(bview, cursor.par(), cursor.par()->size());
}
}
-void LyXText::DeleteEmptyParagraphMechanism(BufferView * bview,
+void LyXText::deleteEmptyParagraphMechanism(BufferView * bview,
LyXCursor const & old_cursor) const
{
// Would be wrong to delete anything if we have a selection.
- if (selection) return;
+ if (selection.set()) return;
// We allow all kinds of "mumbo-jumbo" when freespacing.
if (textclasslist.Style(bview->buffer()->params.textclass,
- old_cursor.par()->GetLayout()).free_spacing)
+ old_cursor.par()->getLayout()).free_spacing)
return;
bool deleted = false;
if (old_cursor.pos() > 0
&& old_cursor.pos() < old_cursor.par()->size()
- && old_cursor.par()->IsLineSeparator(old_cursor.pos())
- && old_cursor.par()->IsLineSeparator(old_cursor.pos() - 1)) {
- old_cursor.par()->Erase(old_cursor.pos() - 1);
- RedoParagraphs(bview, old_cursor, old_cursor.par()->next());
+ && old_cursor.par()->isLineSeparator(old_cursor.pos())
+ && old_cursor.par()->isLineSeparator(old_cursor.pos() - 1)) {
+ old_cursor.par()->erase(old_cursor.pos() - 1);
+ redoParagraphs(bview, old_cursor, old_cursor.par()->next());
// correct cursor
if (old_cursor.par() == cursor.par() &&
cursor.pos() > old_cursor.pos()) {
- SetCursorIntern(bview, cursor.par(),
+ setCursorIntern(bview, cursor.par(),
cursor.pos() - 1);
} else
- SetCursorIntern(bview, cursor.par(),
+ setCursorIntern(bview, cursor.par(),
cursor.pos());
return;
}
// Do not delete empty paragraphs with keepempty set.
if ((textclasslist.Style(bview->buffer()->params.textclass,
- old_cursor.par()->GetLayout())).keepempty)
+ old_cursor.par()->getLayout())).keepempty)
return;
LyXCursor tmpcursor;
if (old_cursor.par() != cursor.par()) {
if ((old_cursor.par()->size() == 0
- || (old_cursor.par()->size() == 1
- && old_cursor.par()->IsLineSeparator(0)))) {
+ || (old_cursor.par()->size() == 1
+ && old_cursor.par()->isLineSeparator(0)))) {
// ok, we will delete anything
// make sure that you do not delete any environments
- status = LyXText::NEED_MORE_REFRESH;
- deleted = true;
+ status(bview, LyXText::NEED_MORE_REFRESH);
+ deleted = true;
- if (old_cursor.row()->previous()) {
- refresh_row = old_cursor.row()->previous();
- refresh_y = old_cursor.y() - old_cursor.row()->baseline() - refresh_row->height();
- tmpcursor = cursor;
- cursor = old_cursor; // that undo can restore the right cursor position
- LyXParagraph * endpar = old_cursor.par()->next();
- if (endpar && endpar->GetDepth()) {
- while (endpar && endpar->GetDepth()) {
- endpar = endpar->next();
- }
- }
- SetUndo(bview->buffer(), Undo::DELETE,
- old_cursor.par()->previous(),
- endpar);
- cursor = tmpcursor;
-
- // delete old row
- RemoveRow(old_cursor.row());
- if (OwnerParagraph() == old_cursor.par()) {
- OwnerParagraph(OwnerParagraph()->next());
+ if (old_cursor.row()->previous()) {
+ refresh_row = old_cursor.row()->previous();
+ refresh_y = old_cursor.y() - old_cursor.row()->baseline() - refresh_row->height();
+ tmpcursor = cursor;
+ cursor = old_cursor; // that undo can restore the right cursor position
+ Paragraph * endpar = old_cursor.par()->next();
+ if (endpar && endpar->getDepth()) {
+ while (endpar && endpar->getDepth()) {
+ endpar = endpar->next();
}
- // delete old par
- delete old_cursor.par();
+ }
+ setUndo(bview, Undo::DELETE,
+ old_cursor.par(),
+ endpar);
+ cursor = tmpcursor;
+
+ // delete old row
+ removeRow(old_cursor.row());
+ if (ownerParagraph() == old_cursor.par()) {
+ ownerParagraph(ownerParagraph()->next());
+ }
+ // delete old par
+ delete old_cursor.par();
- /* Breakagain the next par. Needed
- * because of the parindent that
- * can occur or dissappear. The
- * next row can change its height,
- * if there is another layout before */
- if (refresh_row->next()) {
- BreakAgain(bview, refresh_row->next());
- UpdateCounters(bview, refresh_row);
- }
- SetHeightOfRow(bview, refresh_row);
- } else {
- refresh_row = old_cursor.row()->next();
- refresh_y = old_cursor.y() - old_cursor.row()->baseline();
+ /* Breakagain the next par. Needed
+ * because of the parindent that
+ * can occur or dissappear. The
+ * next row can change its height,
+ * if there is another layout before */
+ if (refresh_row->next()) {
+ breakAgain(bview, refresh_row->next());
+ updateCounters(bview, refresh_row);
+ }
+ setHeightOfRow(bview, refresh_row);
+ } else {
+ refresh_row = old_cursor.row()->next();
+ refresh_y = old_cursor.y() - old_cursor.row()->baseline();
- tmpcursor = cursor;
- cursor = old_cursor; // that undo can restore the right cursor position
- LyXParagraph * endpar = old_cursor.par()->next();
- if (endpar && endpar->GetDepth()) {
- while (endpar && endpar->GetDepth()) {
- endpar = endpar->next();
- }
- }
- SetUndo(bview->buffer(), Undo::DELETE,
- old_cursor.par()->previous(),
- endpar);
- cursor = tmpcursor;
-
- // delete old row
- RemoveRow(old_cursor.row());
- // delete old par
- if (OwnerParagraph() == old_cursor.par()) {
- OwnerParagraph(OwnerParagraph()->next());
+ tmpcursor = cursor;
+ cursor = old_cursor; // that undo can restore the right cursor position
+ Paragraph * endpar = old_cursor.par()->next();
+ if (endpar && endpar->getDepth()) {
+ while (endpar && endpar->getDepth()) {
+ endpar = endpar->next();
}
+ }
+ setUndo(bview, Undo::DELETE,
+ old_cursor.par(),
+ endpar);
+ cursor = tmpcursor;
+
+ // delete old row
+ removeRow(old_cursor.row());
+ // delete old par
+ if (ownerParagraph() == old_cursor.par()) {
+ ownerParagraph(ownerParagraph()->next());
+ }
- delete old_cursor.par();
+ delete old_cursor.par();
- /* Breakagain the next par. Needed
- because of the parindent that can
- occur or dissappear.
- The next row can change its height,
- if there is another layout before
- */
- if (refresh_row) {
- BreakAgain(bview, refresh_row);
- UpdateCounters(bview, refresh_row->previous());
- }
+ /* Breakagain the next par. Needed
+ because of the parindent that can
+ occur or dissappear.
+ The next row can change its height,
+ if there is another layout before
+ */
+ if (refresh_row) {
+ breakAgain(bview, refresh_row);
+ updateCounters(bview, refresh_row->previous());
}
+ }
// correct cursor y
- SetCursorIntern(bview, cursor.par(), cursor.pos());
+ setCursorIntern(bview, cursor.par(), cursor.pos());
- if (sel_cursor.par() == old_cursor.par()
- && sel_cursor.pos() == sel_cursor.pos()) {
- // correct selection
- sel_cursor = cursor;
- }
+ if (selection.cursor.par() == old_cursor.par()
+ && selection.cursor.pos() == selection.cursor.pos()) {
+ // correct selection
+ selection.cursor = cursor;
+ }
}
if (!deleted) {
- if (old_cursor.par()->StripLeadingSpaces(bview->buffer()->params.textclass)) {
- RedoParagraphs(bview, old_cursor, old_cursor.par()->next());
+ if (old_cursor.par()->stripLeadingSpaces(bview->buffer()->params.textclass)) {
+ redoParagraphs(bview, old_cursor, old_cursor.par()->next());
// correct cursor y
- SetCursorIntern(bview, cursor.par(), cursor.pos());
- sel_cursor = cursor;
+ setCursorIntern(bview, cursor.par(), cursor.pos());
+ selection.cursor = cursor;
}
}
}
}
-LyXParagraph * LyXText::GetParFromID(int id)
+void LyXText::toggleAppendix(BufferView * bview)
{
- LyXParagraph * result = FirstParagraph();
- while (result && result->id() != id)
- result = result->next();
- return result;
+ Paragraph * par = cursor.par();
+ bool start = !par->params().startOfAppendix();
+
+ // ensure that we have only one start_of_appendix in this document
+ Paragraph * tmp = firstParagraph();
+ for (; tmp; tmp = tmp->next()) {
+ tmp->params().startOfAppendix(false);
+ }
+
+ par->params().startOfAppendix(start);
+
+ // we can set the refreshing parameters now
+ status(bview, LyXText::NEED_MORE_REFRESH);
+ refresh_y = 0;
+ refresh_row = 0; // not needed for full update
+ updateCounters(bview, 0);
+ setCursor(bview, cursor.par(), cursor.pos());
}
-// undo functions
-bool LyXText::TextUndo(BufferView * bview)
+Paragraph * LyXText::ownerParagraph() const
{
- if (inset_owner)
- return false;
- // returns false if no undo possible
- Undo * undo = bview->buffer()->undostack.pop();
- if (undo) {
- FinishUndo();
- if (!undo_frozen)
- bview->buffer()->redostack
- .push(CreateUndo(bview->buffer(), undo->kind,
- GetParFromID(undo->number_of_before_par),
- GetParFromID(undo->number_of_behind_par)));
+ if (inset_owner) {
+ return inset_owner->paragraph();
}
- return TextHandleUndo(bview, undo);
+ return bv_owner->buffer()->paragraph;
}
-bool LyXText::TextRedo(BufferView * bview)
+Paragraph * LyXText::ownerParagraph(Paragraph * p) const
{
- if (inset_owner)
- return false;
- // returns false if no redo possible
- Undo * undo = bview->buffer()->redostack.pop();
- if (undo) {
- FinishUndo();
- if (!undo_frozen)
- bview->buffer()->undostack
- .push(CreateUndo(bview->buffer(), undo->kind,
- GetParFromID(undo->number_of_before_par),
- GetParFromID(undo->number_of_behind_par)));
+ if (inset_owner) {
+ inset_owner->paragraph(p);
+ } else {
+ bv_owner->buffer()->paragraph = p;
}
- return TextHandleUndo(bview, undo);
+ return 0;
}
-
-bool LyXText::TextHandleUndo(BufferView * bview, Undo * undo)
+Paragraph * LyXText::ownerParagraph(int id, Paragraph * p) const
{
- if (inset_owner)
- return false;
- // returns false if no undo possible
- bool result = false;
- if (undo) {
- LyXParagraph * before =
- GetParFromID(undo->number_of_before_par);
- LyXParagraph * behind =
- GetParFromID(undo->number_of_behind_par);
- LyXParagraph * tmppar;
- LyXParagraph * tmppar2;
- LyXParagraph * endpar;
- LyXParagraph * tmppar5;
-
- // if there's no before take the beginning
- // of the document for redoing
- if (!before)
- SetCursorIntern(bview, FirstParagraph(), 0);
-
- // replace the paragraphs with the undo informations
-
- LyXParagraph * tmppar3 = undo->par;
- undo->par = 0; // otherwise the undo destructor would delete the paragraph
- LyXParagraph * tmppar4 = tmppar3;
-
- if (tmppar4) {
- while (tmppar4->next())
- tmppar4 = tmppar4->next();
- } // get last undo par
-
- // now remove the old text if there is any
- if (before != behind || (!behind && !before)) {
- if (before)
- tmppar5 = before->next();
- else
- tmppar5 = OwnerParagraph();
- tmppar2 = tmppar3;
- while (tmppar5 && tmppar5 != behind) {
- tmppar = tmppar5;
- tmppar5 = tmppar5->next();
- // a memory optimization for edit: Only layout information
- // is stored in the undo. So restore the text informations.
- if (undo->kind == Undo::EDIT) {
- tmppar2->setContentsFromPar(tmppar);
- tmppar->clearContents();
- tmppar2 = tmppar2->next();
- }
- }
- }
-
- // put the new stuff in the list if there is one
- if (tmppar3){
- if (before)
- before->next(tmppar3);
- else
- OwnerParagraph(tmppar3);
- tmppar3->previous(before);
+ Paragraph * op = bv_owner->buffer()->getParFromID(id);
+ if (op && op->inInset()) {
+ static_cast<InsetText *>(op->inInset())->paragraph(p);
+ } else {
+ if (inset_owner) {
+ inset_owner->paragraph(p);
} else {
- if (!before)
- OwnerParagraph(behind);
- }
- if (tmppar4) {
- tmppar4->next(behind);
- if (behind)
- behind->previous(tmppar4);
- }
-
-
- // Set the cursor for redoing
- if (before) {
- SetCursorIntern(bview, before, 0);
+ bv_owner->buffer()->paragraph = p;
}
-
- // calculate the endpar for redoing the paragraphs.
- if (behind) {
- endpar = behind->next();
- } else
- endpar = behind;
-
- tmppar = GetParFromID(undo->number_of_cursor_par);
- RedoParagraphs(bview, cursor, endpar);
- if (tmppar){
- SetCursorIntern(bview, tmppar, undo->cursor_pos);
- UpdateCounters(bview, cursor.row());
- }
- result = true;
- delete undo;
}
- FinishUndo();
- return result;
-}
-
-
-void LyXText::FinishUndo()
-{
- if (inset_owner)
- return;
- // makes sure the next operation will be stored
- undo_finished = true;
-}
-
-
-void LyXText::FreezeUndo()
-{
- if (inset_owner)
- return;
- // this is dangerous and for internal use only
- undo_frozen = true;
-}
-
-
-void LyXText::UnFreezeUndo()
-{
- if (inset_owner)
- return;
- // this is dangerous and for internal use only
- undo_frozen = false;
-}
-
-
-void LyXText::SetUndo(Buffer * buf, Undo::undo_kind kind,
- LyXParagraph const * before,
- LyXParagraph const * behind) const
-{
- if (inset_owner)
- return;
- if (!undo_frozen)
- buf->undostack.push(CreateUndo(buf, kind, before, behind));
- buf->redostack.clear();
+ return 0;
}
-void LyXText::SetRedo(Buffer * buf, Undo::undo_kind kind,
- LyXParagraph const * before, LyXParagraph const * behind)
+LyXText::text_status LyXText::status() const
{
- if (inset_owner)
- return;
- buf->redostack.push(CreateUndo(buf, kind, before, behind));
+ return status_;
}
-Undo * LyXText::CreateUndo(Buffer * buf, Undo::undo_kind kind,
- LyXParagraph const * before,
- LyXParagraph const * behind) const
+void LyXText::status(BufferView * bview, LyXText::text_status st) const
{
- if (inset_owner)
- return 0;
-
- int before_number = -1;
- int behind_number = -1;
- if (before)
- before_number = before->id();
- if (behind)
- behind_number = behind->id();
- // Undo::EDIT and Undo::FINISH are
- // always finished. (no overlapping there)
- // overlapping only with insert and delete inside one paragraph:
- // Nobody wants all removed character
- // appear one by one when undoing.
- // EDIT is special since only layout information, not the
- // contents of a paragaph are stored.
- if (!undo_finished && (kind != Undo::EDIT) && (kind != Undo::FINISH)){
- // check wether storing is needed
- if (!buf->undostack.empty() &&
- buf->undostack.top()->kind == kind &&
- buf->undostack.top()->number_of_before_par == before_number &&
- buf->undostack.top()->number_of_behind_par == behind_number ){
- // no undo needed
- return 0;
- }
- }
- // create a new Undo
- LyXParagraph * undopar;
- LyXParagraph * tmppar;
- LyXParagraph * tmppar2;
-
- LyXParagraph * start = 0;
- LyXParagraph * end = 0;
-
- if (before)
- start = const_cast<LyXParagraph*>(before->next());
- else
- start = FirstParagraph();
- if (behind)
- end = const_cast<LyXParagraph*>(behind->previous());
- else {
- end = FirstParagraph();
- while (end->next())
- end = end->next();
- }
- if (start && end && (start != end->next()) &&
- ((before != behind) || (!before && !behind))) {
- tmppar = start;
- tmppar2 = tmppar->Clone();
- tmppar2->id(tmppar->id());
-
- // a memory optimization: Just store the layout information
- // when only edit
- if (kind == Undo::EDIT){
- //tmppar2->text.clear();
- tmppar2->clearContents();
- }
+ // well as much as I know && binds more then || so the above and the
+ // below are identical (this for your known use of parentesis!)
+ // Now some explanation:
+ // We should only go up with refreshing code so this means that if
+ // we have a MORE refresh we should never set it to LITTLE if we still
+ // didn't handle it (and then it will be UNCHANGED. Now as long as
+ // we stay inside one LyXText this may work but we need to tell the
+ // outermost LyXText that it should REALLY draw us if there is some
+ // change in a Inset::LyXText. So you see that when we are inside a
+ // inset's LyXText we give the LITTLE to the outermost LyXText to
+ // tell'em that it should redraw the actual row (where the inset
+ // resides! Capito?!
- undopar = tmppar2;
-
- while (tmppar != end && tmppar->next()) {
- tmppar = tmppar->next();
- tmppar2->next(tmppar->Clone());
- tmppar2->next()->id(tmppar->id());
- // a memory optimization: Just store the layout
- // information when only edit
- if (kind == Undo::EDIT){
- //tmppar2->next->text.clear();
- tmppar2->clearContents();
+ if ((status_ != NEED_MORE_REFRESH)
+ || (status_ == NEED_MORE_REFRESH
+ && st != NEED_VERY_LITTLE_REFRESH))
+ {
+ status_ = st;
+ if (inset_owner && st != UNCHANGED) {
+ bview->text->status(bview, NEED_VERY_LITTLE_REFRESH);
+ if (!bview->text->refresh_row) {
+ bview->text->refresh_row = bview->text->cursor.row();
+ bview->text->refresh_y = bview->text->cursor.y() -
+ bview->text->cursor.row()->baseline();
}
- tmppar2->next()->previous(tmppar2);
- tmppar2 = tmppar2->next();
}
- tmppar2->next(0);
- } else
- undopar = 0; // nothing to replace (undo of delete maybe)
-
- int cursor_par = cursor.par()->id();
- int cursor_pos = cursor.pos();
-
- Undo * undo = new Undo(kind,
- before_number, behind_number,
- cursor_par, cursor_pos,
- undopar);
-
- undo_finished = false;
- return undo;
-}
-
-
-void LyXText::SetCursorParUndo(Buffer * buf)
-{
- if (inset_owner)
- return;
- SetUndo(buf, Undo::FINISH,
- cursor.par()->previous(),
- cursor.par()->next());
-}
-
-
-void LyXText::toggleAppendix(BufferView * bview)
-{
- LyXParagraph * par = cursor.par();
- bool start = !par->params.startOfAppendix();
-
- // ensure that we have only one start_of_appendix in this document
- LyXParagraph * tmp = FirstParagraph();
- for (; tmp; tmp = tmp->next())
- tmp->params.startOfAppendix(false);
-
- par->params.startOfAppendix(start);
-
- // we can set the refreshing parameters now
- status = LyXText::NEED_MORE_REFRESH;
- refresh_y = 0;
- refresh_row = 0; // not needed for full update
- UpdateCounters(bview, 0);
- SetCursor(bview, cursor.par(), cursor.pos());
-}
-
-
-LyXParagraph * LyXText::OwnerParagraph() const
-{
- if (inset_owner)
- return inset_owner->par;
-
- return bv_owner->buffer()->paragraph;
-}
-
-
-LyXParagraph * LyXText::OwnerParagraph(LyXParagraph * p) const
-{
- if (inset_owner)
- inset_owner->par = p;
- else
- bv_owner->buffer()->paragraph = p;
- return 0;
+ }
}