#include "lyxtext.h"
#include "LString.h"
+#include "Lsstream.h"
#include "paragraph.h"
+#include "funcrequest.h"
#include "frontends/LyXView.h"
#include "undo_funcs.h"
#include "buffer.h"
#include "bufferparams.h"
+#include "errorlist.h"
#include "gettext.h"
#include "BufferView.h"
#include "CutAndPaste.h"
#include "ParagraphParameters.h"
#include "counters.h"
#include "lyxrow_funcs.h"
+#include "paragraph_funcs.h"
#include "insets/insetbibitem.h"
+#include "insets/insetenv.h"
#include "insets/insetfloat.h"
+#include "insets/insetwrap.h"
#include "support/LAssert.h"
#include "support/textutils.h"
#include "support/lstrings.h"
-#include "support/BoostFormat.h"
+#include <boost/tuple/tuple.hpp>
using std::vector;
using std::copy;
rowlist_.clear();
need_break_row = rows().end();
width = height = 0;
- copylayouttype.erase();
top_y(0);
clearPaint();
} else if (!rowlist_.empty())
return;
- ParagraphList::iterator par = ownerParagraphs().begin();
+ ParagraphList::iterator pit = ownerParagraphs().begin();
ParagraphList::iterator end = ownerParagraphs().end();
- current_font = getFont(bview->buffer(), &*par, 0);
+ current_font = getFont(bview->buffer(), pit, 0);
- for (; par != end; ++par) {
- insertParagraph(&*par, rowlist_.end());
+ for (; pit != end; ++pit) {
+ insertParagraph(pit, rowlist_.end());
}
- setCursorIntern(&*rowlist_.begin()->par(), 0);
+ setCursorIntern(rowlist_.begin()->par(), 0);
selection.cursor = cursor;
updateCounters();
}
-namespace {
-
-LyXFont const realizeFont(LyXFont const & font,
- Buffer const * buf,
- Paragraph * par)
-{
- LyXTextClass const & tclass = buf->params.getLyXTextClass();
- LyXFont tmpfont(font);
- Paragraph::depth_type par_depth = par->getDepth();
-
- // Resolve against environment font information
- while (par && par_depth && !tmpfont.resolved()) {
- par = par->outerHook();
- if (par) {
- tmpfont.realize(par->layout()->font);
- par_depth = par->getDepth();
- }
- }
-
- tmpfont.realize(tclass.defaultfont());
-
- return tmpfont;
-}
-
-}
-
-
// Gets the fully instantiated font at a given position in a paragraph
// Basically the same routine as Paragraph::getFont() in paragraph.C.
// The difference is that this one is used for displaying, and thus we
if (pit->inInset())
pit->inInset()->getDrawFont(tmpfont);
- return realizeFont(tmpfont, buf, &*pit);
+ // Realize with the fonts of lesser depth.
+ tmpfont.realize(outerFont(pit, ownerParagraphs()));
+
+ return realizeFont(tmpfont, buf->params);
}
-LyXFont const LyXText::getLayoutFont(Buffer const * buf, Paragraph * par) const
+LyXFont const LyXText::getLayoutFont(Buffer const * buf,
+ ParagraphList::iterator pit) const
{
- LyXLayout_ptr const & layout = par->layout();
+ LyXLayout_ptr const & layout = pit->layout();
- if (!par->getDepth()) {
+ if (!pit->getDepth()) {
return layout->resfont;
}
- return realizeFont(layout->font, buf, par);
+ LyXFont font(layout->font);
+ // Realize with the fonts of lesser depth.
+ font.realize(outerFont(pit, ownerParagraphs()));
+
+ return realizeFont(font, buf->params);
}
-LyXFont const LyXText::getLabelFont(Buffer const * buf, Paragraph * par) const
+LyXFont const LyXText::getLabelFont(Buffer const * buf,
+ ParagraphList::iterator pit) const
{
- LyXLayout_ptr const & layout = par->layout();
+ LyXLayout_ptr const & layout = pit->layout();
- if (!par->getDepth()) {
+ if (!pit->getDepth()) {
return layout->reslabelfont;
}
- return realizeFont(layout->labelfont, buf, par);
+ LyXFont font(layout->labelfont);
+ // Realize with the fonts of lesser depth.
+ font.realize(outerFont(pit, ownerParagraphs()));
+
+ return realizeFont(layout->labelfont, buf->params);
}
-void LyXText::setCharFont(Paragraph * par,
+void LyXText::setCharFont(ParagraphList::iterator pit,
pos_type pos, LyXFont const & fnt,
bool toggleall)
{
Buffer const * buf = bv()->buffer();
- LyXFont font = getFont(buf, par, pos);
+ LyXFont font = getFont(buf, pit, pos);
font.update(fnt, buf->params.language, toggleall);
// Let the insets convert their font
- if (par->isInset(pos)) {
- Inset * inset = par->getInset(pos);
+ if (pit->isInset(pos)) {
+ Inset * inset = pit->getInset(pos);
if (isEditableInset(inset)) {
UpdatableInset * uinset =
static_cast<UpdatableInset *>(inset);
}
// Plug thru to version below:
- setCharFont(buf, par, pos, font);
+ setCharFont(buf, pit, pos, font);
}
-void LyXText::setCharFont(Buffer const * buf, Paragraph * par,
+void LyXText::setCharFont(Buffer const * buf, ParagraphList::iterator pit,
pos_type pos, LyXFont const & fnt)
{
LyXFont font(fnt);
LyXTextClass const & tclass = buf->params.getLyXTextClass();
- LyXLayout_ptr const & layout = par->layout();
+ LyXLayout_ptr const & layout = pit->layout();
// Get concrete layout font to reduce against
LyXFont layoutfont;
- if (pos < par->beginningOfBody())
+ if (pos < pit->beginningOfBody())
layoutfont = layout->labelfont;
else
layoutfont = layout->font;
// Realize against environment font information
- if (par->getDepth()) {
- Paragraph * tp = par;
- while (!layoutfont.resolved() && tp && tp->getDepth()) {
- tp = tp->outerHook();
- if (tp)
+ if (pit->getDepth()) {
+ ParagraphList::iterator tp = pit;
+ while (!layoutfont.resolved() &&
+ tp != ownerParagraphs().end() &&
+ tp->getDepth()) {
+ tp = outerHook(tp, ownerParagraphs());
+ if (tp != ownerParagraphs().end())
layoutfont.realize(tp->layout()->font);
}
}
// Now, reduce font against full layout font
font.reduce(layoutfont);
- par->setFont(pos, font);
+ pit->setFont(pos, font);
}
if (anchor_row_ == rit) {
if (rit != rows().begin()) {
anchor_row_ = boost::prior(rit);
- anchor_row_offset_ += boost::prior(rit)->height();
+ anchor_row_offset_ += anchor_row_->height();
} else {
anchor_row_ = boost::next(rit);
anchor_row_offset_ -= rit->height();
}
-#warning FIXME Convert this to ParagraphList::iterator
-void LyXText::insertParagraph(Paragraph * par, RowList::iterator rowit)
+void LyXText::insertParagraph(ParagraphList::iterator pit,
+ RowList::iterator rowit)
{
// insert a new row, starting at position 0
- Row newrow(par, 0);
+ Row newrow(pit, 0);
RowList::iterator rit = rowlist_.insert(rowit, newrow);
// and now append the whole paragraph before the new row
Inset * LyXText::getInset() const
{
- if (cursor.pos() < cursor.par()->size()
- && cursor.par()->isInset(cursor.pos())) {
- return cursor.par()->getInset(cursor.pos());
+ ParagraphList::iterator pit = cursor.par();
+ pos_type const pos = cursor.pos();
+
+ if (pos < pit->size() && pit->isInset(pos)) {
+ return pit->getInset(pos);
}
return 0;
}
// No, try to see if we are inside a collapsable inset
if (inset_owner && inset_owner->owner()
&& inset_owner->owner()->isOpen()) {
- bv()->unlockInset(static_cast<UpdatableInset *>(inset_owner->owner()));
+ bv()->unlockInset(inset_owner->owner());
inset_owner->owner()->close(bv());
bv()->getLyXText()->cursorRight(bv());
}
Paragraph & par)
{
LyXLayout_ptr const & layout = par.layout();
+ pos_type const psize = par.size();
LyXFont layoutfont;
- for (pos_type pos = 0; pos < par.size(); ++pos) {
+ for (pos_type pos = 0; pos < psize; ++pos) {
if (pos < par.beginningOfBody())
layoutfont = layout->labelfont;
else
}
-Paragraph * LyXText::setLayout(LyXCursor & cur, LyXCursor & sstart_cur,
- LyXCursor & send_cur,
- string const & layout)
+ParagraphList::iterator
+LyXText::setLayout(LyXCursor & cur, LyXCursor & sstart_cur,
+ LyXCursor & send_cur,
+ string const & layout)
{
- Paragraph * endpar = send_cur.par()->next();
- Paragraph * undoendpar = endpar;
+ ParagraphList::iterator endpit = boost::next(send_cur.par());
+ ParagraphList::iterator undoendpit = endpit;
+ ParagraphList::iterator pars_end = ownerParagraphs().end();
- if (endpar && endpar->getDepth()) {
- while (endpar && endpar->getDepth()) {
- endpar = endpar->next();
- undoendpar = endpar;
+ if (endpit != pars_end && endpit->getDepth()) {
+ while (endpit != pars_end && endpit->getDepth()) {
+ ++endpit;
+ undoendpit = endpit;
}
- } else if (endpar) {
- endpar = endpar->next(); // because of parindents etc.
+ } else if (endpit != pars_end) {
+ // because of parindents etc.
+ ++endpit;
}
- setUndo(bv(), Undo::EDIT, &*sstart_cur.par(), undoendpar);
+ setUndo(bv(), Undo::EDIT, sstart_cur.par(), boost::prior(undoendpit));
// ok we have a selection. This is always between sstart_cur
// and sel_end cursor
++pit;
} while (pit != epit);
- return endpar;
+ return endpit;
}
// set layout over selection and make a total rebreak of those paragraphs
void LyXText::setLayout(string const & layout)
{
- LyXCursor tmpcursor = cursor; /* store the current cursor */
+ LyXCursor tmpcursor = cursor; // store the current cursor
// if there is no selection just set the layout
- // of the current paragraph */
+ // of the current paragraph
if (!selection.set()) {
selection.start = cursor; // dummy selection
selection.end = cursor;
}
- Paragraph * endpar = setLayout(cursor, selection.start,
- selection.end, layout);
- redoParagraphs(selection.start, endpar);
+
+ // special handling of new environment insets
+ BufferParams const & params = bv()->buffer()->params;
+ LyXLayout_ptr const & lyxlayout = params.getLyXTextClass()[layout];
+ if (lyxlayout->is_environment) {
+ // move everything in a new environment inset
+ lyxerr << "setting layout " << layout << endl;
+ bv()->owner()->dispatch(FuncRequest(LFUN_HOME));
+ bv()->owner()->dispatch(FuncRequest(LFUN_ENDSEL));
+ bv()->owner()->dispatch(FuncRequest(LFUN_CUT));
+ Inset * inset = new InsetEnvironment(params, layout);
+ if (bv()->insertInset(inset)) {
+ //inset->edit(bv());
+ //bv()->owner()->dispatch(FuncRequest(LFUN_PASTE));
+ }
+ else
+ delete inset;
+ return;
+ }
+
+ ParagraphList::iterator endpit = setLayout(cursor, selection.start,
+ selection.end, layout);
+ redoParagraphs(selection.start, endpit);
// we have to reset the selection, because the
// geometry could have changed
- setCursor(selection.start.par(),
- selection.start.pos(), false);
+ setCursor(selection.start.par(), selection.start.pos(), false);
selection.cursor = cursor;
setCursor(selection.end.par(), selection.end.pos(), false);
updateCounters();
ParagraphList::iterator pastend = boost::next(end);
if (!test_only)
- setUndo(bv(), Undo::EDIT, &(*start), &(*pastend));
+ setUndo(bv(), Undo::EDIT, start, end);
bool changed = false;
// Wow, redoParagraphs is stupid.
LyXCursor tmpcursor;
- setCursor(tmpcursor, &(*start), 0);
+ setCursor(tmpcursor, start, 0);
//redoParagraphs(tmpcursor, &(*pastend));
- redoParagraphs(tmpcursor, &(*pastend));
+ redoParagraphs(tmpcursor, pastend);
// We need to actually move the text->cursor. I don't
// understand why ...
LyXFont layoutfont;
if (cursor.pos() < cursor.par()->beginningOfBody()) {
layoutfont = getLabelFont(bv()->buffer(),
- &*cursor.par());
+ cursor.par());
} else {
layoutfont = getLayoutFont(bv()->buffer(),
- &*cursor.par());
+ cursor.par());
}
// Update current font
real_current_font.update(font,
// ok we have a selection. This is always between sel_start_cursor
// and sel_end cursor
- setUndo(bv(), Undo::EDIT,
- &*selection.start.par(), &*boost::next(selection.end.par()));
+ setUndo(bv(), Undo::EDIT, selection.start.par(), selection.end.par());
freezeUndo();
cursor = selection.start;
while (cursor.par() != selection.end.par() ||
{
if (cursor.pos() < cursor.par()->size()) {
// an open footnote should behave like a closed one
- setCharFont(&*cursor.par(), cursor.pos(),
+ setCharFont(cursor.par(), cursor.pos(),
font, toggleall);
cursor.pos(cursor.pos() + 1);
} else {
cursor.pos(0);
- cursor.par(cursor.par()->next());
+ cursor.par(boost::next(cursor.par()));
}
}
unFreezeUndo();
- redoParagraphs(selection.start, selection.end.par()->next());
+ redoParagraphs(selection.start, boost::next(selection.end.par()));
// we have to reset the selection, because the
// geometry could have changed, but we keep
}
-// deletes and inserts again all paragaphs between the cursor
+// deletes and inserts again all paragraphs between the cursor
// and the specified par
// This function is needed after SetLayout and SetFont etc.
void LyXText::redoParagraphs(LyXCursor const & cur,
- Paragraph const * ep)
+ ParagraphList::iterator endpit)
{
RowList::iterator tmprit = cur.row();
- ParagraphList::iterator endpit(const_cast<Paragraph*>(ep));
int y = cur.y() - tmprit->baseline();
ParagraphList::iterator first_phys_pit;
+ RowList::iterator prevrit;
if (tmprit == rows().begin()) {
// A trick/hack for UNDO.
// This is needed because in an UNDO/REDO we could have
- // changed the ownerParagrah() so the paragraph inside
+ // changed the ownerParagraph() so the paragraph inside
// the row is NOT my really first par anymore.
// Got it Lars ;) (Jug 20011206)
first_phys_pit = ownerParagraphs().begin();
-#warning FIXME
- // In here prevrit could be set to rows().end(). (Lgb)
+ prevrit = rows().end();
} else {
first_phys_pit = tmprit->par();
while (tmprit != rows().begin()
--tmprit;
y -= tmprit->height();
}
-#warning FIXME
- // Is it possible to put the prevrit setting in here? (Lgb)
- }
-
- RowList::iterator prevrit;
- bool good_prevrit = false;
-#warning FIXME
- // It seems to mee that good_prevrit is not needed if we let
- // a bad prevrit have the value rows().end() (Lgb)
- if (tmprit != rows().begin()) {
prevrit = boost::prior(tmprit);
- good_prevrit = true;
}
// remove it
// Reinsert the paragraphs.
ParagraphList::iterator tmppit = first_phys_pit;
-#warning FIXME
- // See if this loop can be rewritten as a while loop instead.
- // That should also make the code a bit easier to read. (Lgb)
- do {
- if (tmppit != ownerParagraphs().end()) {
- insertParagraph(&*tmppit, tmprit);
- while (tmprit != rows().end()
- && tmprit->par() == tmppit) {
- ++tmprit;
- }
- ++tmppit;
- }
- } while (tmppit != ownerParagraphs().end() && tmppit != endpit);
-#warning FIXME
- // If the above changes are done, then we can compare prevrit
- // with rows().end() here. (Lgb)
- if (good_prevrit) {
+ while (tmppit != ownerParagraphs().end()) {
+ insertParagraph(tmppit, tmprit);
+ while (tmprit != rows().end()
+ && tmprit->par() == tmppit) {
+ ++tmprit;
+ }
+ ++tmppit;
+ if (tmppit == endpit)
+ break;
+ }
+ if (prevrit != rows().end()) {
setHeightOfRow(prevrit);
- const_cast<LyXText *>(this)->postPaint(y - prevrit->height());
+ postPaint(y - prevrit->height());
} else {
setHeightOfRow(rows().begin());
- const_cast<LyXText *>(this)->postPaint(0);
+ postPaint(0);
}
if (tmprit != rows().end())
setHeightOfRow(tmprit);
init(bv());
return;
}
- if (need_break_row != rows().end()) {
+
+ RowList::iterator rows_end = rows().end();
+
+ if (need_break_row != rows_end) {
breakAgain(need_break_row);
- need_break_row = rows().end();
+ need_break_row = rows_end;
return;
}
}
result += startpit->asString(buffer, startpos, startpit->size(), label) + "\n\n";
// The paragraphs in between (if any)
-#warning FIXME Why isnt ParagraphList::iterator used here?
- // as loop variable.
- LyXCursor tmpcur(selection.start);
- tmpcur.par(tmpcur.par()->next());
- while (tmpcur.par() != endpit) {
- result += tmpcur.par()->asString(buffer, 0,
- tmpcur.par()->size(),
- label) + "\n\n";
- tmpcur.par(boost::next(tmpcur.par()));
+ ParagraphList::iterator pit = boost::next(startpit);
+ for (; pit != endpit; ++pit) {
+ result += pit->asString(buffer, 0, pit->size(), label) + "\n\n";
}
// Last paragraph in selection
{
if (cursor.par()->empty())
return;
-#warning FIXME
-// There is a lot of unneeded recalculation going on here:
-// - boost::next(curosr.row())
-// - lastPost(*this, cursor.row())
-
- if (boost::next(cursor.row()) == rows().end()
- || boost::next(cursor.row())->par() != cursor.row()->par()) {
- setCursor(cursor.par(), lastPos(*this, cursor.row()) + 1);
+
+ RowList::iterator rit = cursor.row();
+ RowList::iterator next_rit = boost::next(rit);
+ ParagraphList::iterator pit = rit->par();
+ pos_type last_pos = lastPos(*this, rit);
+
+ if (next_rit == rows().end() || next_rit->par() != pit) {
+ ++last_pos;
} else {
- if (!cursor.par()->empty() &&
- (cursor.par()->getChar(lastPos(*this, cursor.row())) == ' '
- || cursor.par()->isNewline(lastPos(*this, cursor.row())))) {
- setCursor(cursor.par(), lastPos(*this, cursor.row()));
- } else {
- setCursor(cursor.par(),
- lastPos(*this, cursor.row()) + 1);
+ if (pit->empty() ||
+ (pit->getChar(last_pos) != ' ' && !pit->isNewline(last_pos))) {
+ ++last_pos;
}
}
+
+ setCursor(pit, last_pos);
}
void LyXText::cursorTop()
{
- while (cursor.par()->previous())
- cursor.par(cursor.par()->previous());
- setCursor(cursor.par(), 0);
+ setCursor(ownerParagraphs().begin(), 0);
}
void LyXText::cursorBottom()
{
- while (cursor.par()->next())
- cursor.par(cursor.par()->next());
- setCursor(cursor.par(), cursor.par()->size());
+ ParagraphList::iterator lastpit =
+ boost::prior(ownerParagraphs().end());
+ setCursor(lastpit, lastpit->size());
}
}
// make sure that the depth behind the selection are restored, too
- Paragraph * endpar = selection.end.par()->next();
- Paragraph * undoendpar = endpar;
-
- if (endpar && endpar->getDepth()) {
- while (endpar && endpar->getDepth()) {
- endpar = endpar->next();
- undoendpar = endpar;
+ ParagraphList::iterator endpit = boost::next(selection.end.par());
+ ParagraphList::iterator undoendpit = endpit;
+ ParagraphList::iterator pars_end = ownerParagraphs().end();
+
+ if (endpit != pars_end && endpit->getDepth()) {
+ while (endpit != pars_end && endpit->getDepth()) {
+ ++endpit;
+ undoendpit = endpit;
}
- }
- else if (endpar) {
+ } else if (endpit != pars_end) {
// because of parindents etc.
- endpar = endpar->next();
+ ++endpit;
}
- setUndo(bv(), Undo::EDIT, &*selection.start.par(), undoendpar);
+ setUndo(bv(), Undo::EDIT, selection.start.par(),
+ boost::prior(undoendpit));
ParagraphList::iterator tmppit = selection.end.par();
while (tmppit != boost::prior(selection.start.par())) {
setCursor(tmppit, 0);
postPaint(cursor.y() - cursor.row()->baseline());
- cursor.par()->params().lineTop(line_top);
- cursor.par()->params().lineBottom(line_bottom);
- cursor.par()->params().pagebreakTop(pagebreak_top);
- cursor.par()->params().pagebreakBottom(pagebreak_bottom);
- cursor.par()->params().spaceTop(space_top);
- cursor.par()->params().spaceBottom(space_bottom);
- cursor.par()->params().spacing(spacing);
+
+ ParagraphList::iterator pit = cursor.par();
+ ParagraphParameters & params = pit->params();
+
+ params.lineTop(line_top);
+ params.lineBottom(line_bottom);
+ params.pagebreakTop(pagebreak_top);
+ params.pagebreakBottom(pagebreak_bottom);
+ params.spaceTop(space_top);
+ params.spaceBottom(space_bottom);
+ params.spacing(spacing);
// does the layout allow the new alignment?
- LyXLayout_ptr const & layout = cursor.par()->layout();
+ LyXLayout_ptr const & layout = pit->layout();
if (align == LYX_ALIGN_LAYOUT)
align = layout->align;
if (align & layout->alignpossible) {
if (align == layout->align)
- cursor.par()->params().align(LYX_ALIGN_LAYOUT);
+ params.align(LYX_ALIGN_LAYOUT);
else
- cursor.par()->params().align(align);
+ params.align(align);
}
- cursor.par()->setLabelWidthString(labelwidthstring);
- cursor.par()->params().noindent(noindent);
- tmppit = boost::prior(cursor.par());
+ pit->setLabelWidthString(labelwidthstring);
+ params.noindent(noindent);
+ tmppit = boost::prior(pit);
}
- redoParagraphs(selection.start, endpar);
+ redoParagraphs(selection.start, endpit);
clearSelection();
setCursor(selection.start.par(), selection.start.pos());
// set the counter of a paragraph. This includes the labels
-void LyXText::setCounter(Buffer const * buf, Paragraph * par)
+void LyXText::setCounter(Buffer const * buf, ParagraphList::iterator pit)
{
LyXTextClass const & textclass = buf->params.getLyXTextClass();
- LyXLayout_ptr const & layout = par->layout();
+ LyXLayout_ptr const & layout = pit->layout();
- if (par->previous()) {
+ if (pit != ownerParagraphs().begin()) {
- par->params().appendix(par->previous()->params().appendix());
- if (!par->params().appendix() && par->params().startOfAppendix()) {
- par->params().appendix(true);
+ pit->params().appendix(boost::prior(pit)->params().appendix());
+ if (!pit->params().appendix() &&
+ pit->params().startOfAppendix()) {
+ pit->params().appendix(true);
textclass.counters().reset();
}
- par->enumdepth = par->previous()->enumdepth;
- par->itemdepth = par->previous()->itemdepth;
+ pit->enumdepth = boost::prior(pit)->enumdepth;
+ pit->itemdepth = boost::prior(pit)->itemdepth;
} else {
- par->params().appendix(par->params().startOfAppendix());
- par->enumdepth = 0;
- par->itemdepth = 0;
+ pit->params().appendix(pit->params().startOfAppendix());
+ pit->enumdepth = 0;
+ pit->itemdepth = 0;
}
/* Maybe we have to increment the enumeration depth.
* AND, bibliographies can't have their depth changed ie. they
* are always of depth 0
*/
- if (par->previous()
- && par->previous()->getDepth() < par->getDepth()
- && par->previous()->layout()->labeltype == LABEL_COUNTER_ENUMI
- && par->enumdepth < 3
+ if (pit != ownerParagraphs().begin()
+ && boost::prior(pit)->getDepth() < pit->getDepth()
+ && boost::prior(pit)->layout()->labeltype == LABEL_COUNTER_ENUMI
+ && pit->enumdepth < 3
&& layout->labeltype != LABEL_BIBLIO) {
- par->enumdepth++;
+ pit->enumdepth++;
}
// Maybe we have to decrement the enumeration depth, see note above
- if (par->previous()
- && par->previous()->getDepth() > par->getDepth()
+ if (pit != ownerParagraphs().begin()
+ && boost::prior(pit)->getDepth() > pit->getDepth()
&& layout->labeltype != LABEL_BIBLIO) {
- par->enumdepth = par->depthHook(par->getDepth())->enumdepth;
+ pit->enumdepth = depthHook(pit, ownerParagraphs(),
+ pit->getDepth())->enumdepth;
}
- if (!par->params().labelString().empty()) {
- par->params().labelString(string());
+ if (!pit->params().labelString().empty()) {
+ pit->params().labelString(string());
}
if (layout->margintype == MARGIN_MANUAL) {
- if (par->params().labelWidthString().empty()) {
- par->setLabelWidthString(layout->labelstring());
+ if (pit->params().labelWidthString().empty()) {
+ pit->setLabelWidthString(layout->labelstring());
}
} else {
- par->setLabelWidthString(string());
+ pit->setLabelWidthString(string());
}
// is it a layout that has an automatic label?
textclass.counters().step(layout->latexname());
// Is there a label? Useful for Chapter layout
- if (!par->params().appendix()) {
- s << layout->labelstring();
+ if (!pit->params().appendix()) {
+ s << buf->B_(layout->labelstring());
} else {
- s << layout->labelstring_appendix();
+ s << buf->B_(layout->labelstring_appendix());
}
// Use of an integer is here less than elegant. For now.
int head = textclass.maxcounter() - LABEL_COUNTER_CHAPTER;
- if (!par->params().appendix()) {
+ if (!pit->params().appendix()) {
numbertype = "sectioning";
} else {
numbertype = "appendix";
- if (par->isRightToLeftPar(buf->params))
+ if (pit->isRightToLeftPar(buf->params))
langtype = "hebrew";
else
langtype = "latin";
}
- s << textclass.counters()
+ s << " "
+ << textclass.counters()
.numberLabel(layout->latexname(),
numbertype, langtype, head);
- par->params().labelString(STRCONV(s.str()));
+ pit->params().labelString(STRCONV(s.str()));
// reset enum counters
textclass.counters().reset("enum");
// (Lgb)
string enumcounter("enum");
- switch (par->enumdepth) {
+ switch (pit->enumdepth) {
case 2:
enumcounter += 'i';
case 1:
s << textclass.counters()
.numberLabel(enumcounter, "enumeration");
- par->params().labelString(STRCONV(s.str()));
+ pit->params().labelString(STRCONV(s.str()));
}
} else if (layout->labeltype == LABEL_BIBLIO) {// ale970302
textclass.counters().step("bibitem");
int number = textclass.counters().value("bibitem");
- if (par->bibitem()) {
- par->bibitem()->setCounter(number);
- par->params().labelString(layout->labelstring());
+ if (pit->bibitem()) {
+ pit->bibitem()->setCounter(number);
+ pit->params().labelString(layout->labelstring());
}
// In biblio should't be following counters but...
} else {
- string s = layout->labelstring();
+ string s = buf->B_(layout->labelstring());
// the caption hack:
if (layout->labeltype == LABEL_SENSITIVE) {
- Paragraph * tmppar = par;
+ ParagraphList::iterator tmppit = pit;
Inset * in = 0;
bool isOK = false;
- while (tmppar && tmppar->inInset()
+ while (tmppit != ownerParagraphs().end() &&
+ tmppit->inInset()
// the single '=' is intended below
- && (in = tmppar->inInset()->owner())) {
+ && (in = tmppit->inInset()->owner())) {
if (in->lyxCode() == Inset::FLOAT_CODE ||
in->lyxCode() == Inset::WRAP_CODE) {
isOK = true;
break;
} else {
- tmppar = in->parOwner();
+ tmppit = std::find(ownerParagraphs().begin(), ownerParagraphs().end(), *in->parOwner());
}
}
if (isOK) {
- Floating const & fl
- = textclass.floats().getType(static_cast<InsetFloat*>(in)->type());
+ string type;
+
+ if (in->lyxCode() == Inset::FLOAT_CODE)
+ type = static_cast<InsetFloat*>(in)->params().type;
+ else if (in->lyxCode() == Inset::WRAP_CODE)
+ type = static_cast<InsetWrap*>(in)->params().type;
+ else
+ lyx::Assert(0);
+
+ Floating const & fl = textclass.floats().getType(type);
textclass.counters().step(fl.type());
// Doesn't work... yet.
-#if USE_BOOST_FORMAT
- s = boost::io::str(boost::format(_("%1$s #:")) % fl.name());
- // s << boost::format(_("%1$s %1$d:")
- // % fl.name()
- // % buf->counters().value(fl.name());
-#else
- ostringstream o;
- //o << fl.name() << ' ' << buf->counters().value(fl.name()) << ":";
- o << fl.name() << " #:";
- s = STRCONV(o.str());
-#endif
+ s = bformat(_("%1$s #:"), buf->B_(fl.name()));
} else {
// par->SetLayout(0);
// s = layout->labelstring;
s = _("Senseless: ");
}
}
- par->params().labelString(s);
+ pit->params().labelString(s);
// reset the enumeration counter. They are always reset
// when there is any other layout between
// Just fall-through between the cases so that all
// enum counters deeper than enumdepth is also reset.
- switch (par->enumdepth) {
+ switch (pit->enumdepth) {
case 0:
textclass.counters().reset("enumi");
case 1:
// CHECK if this is really needed. (Lgb)
bv()->buffer()->params.getLyXTextClass().counters().reset();
- while (pit != ownerParagraphs().end()) {
+ ParagraphList::iterator beg = ownerParagraphs().begin();
+ ParagraphList::iterator end = ownerParagraphs().end();
+ for (; pit != end; ++pit) {
while (rowit->par() != pit)
++rowit;
string const oldLabel = pit->params().labelString();
- int maxdepth = 0;
- if (pit != ownerParagraphs().begin())
+ size_t maxdepth = 0;
+ if (pit != beg)
maxdepth = boost::prior(pit)->getMaxDepthAfter();
if (pit->params().depth() > maxdepth)
pit->params().depth(maxdepth);
// setCounter can potentially change the labelString.
- setCounter(bv()->buffer(), &*pit);
+ setCounter(bv()->buffer(), pit);
string const & newLabel = pit->params().labelString();
removeParagraph(rowit);
appendParagraph(rowit);
}
-
- ++pit;
}
}
{
if (!cursor.par()->insetAllowed(inset->lyxCode()))
return;
- setUndo(bv(), Undo::FINISH, &*cursor.par(),
- &*boost::next(cursor.par()));
+ setUndo(bv(), Undo::FINISH, cursor.par());
freezeUndo();
cursor.par()->insertInset(cursor.pos(), inset);
// Just to rebreak and refresh correctly.
}
-void LyXText::copyEnvironmentType()
-{
- copylayouttype = cursor.par()->layout()->name();
-}
-
-
-void LyXText::pasteEnvironmentType()
-{
- // do nothing if there has been no previous copyEnvironmentType()
- if (!copylayouttype.empty())
- setLayout(copylayouttype);
-}
-
-
void LyXText::cutSelection(bool doclear, bool realcut)
{
// Stuff what we got on the clipboard. Even if there is no selection.
// and selection.end
// make sure that the depth behind the selection are restored, too
- Paragraph * endpar = selection.end.par()->next();
- Paragraph * undoendpar = endpar;
-
- if (endpar && endpar->getDepth()) {
- while (endpar && endpar->getDepth()) {
- endpar = endpar->next();
- undoendpar = endpar;
+ ParagraphList::iterator endpit = boost::next(selection.end.par());
+ ParagraphList::iterator undoendpit = endpit;
+ ParagraphList::iterator pars_end = ownerParagraphs().end();
+
+ if (endpit != pars_end && endpit->getDepth()) {
+ while (endpit != pars_end && endpit->getDepth()) {
+ ++endpit;
+ undoendpit = endpit;
}
- } else if (endpar) {
- endpar = endpar->next(); // because of parindents etc.
+ } else if (endpit != pars_end) {
+ // because of parindents etc.
+ ++endpit;
}
- setUndo(bv(), Undo::DELETE,
- &*selection.start.par(), undoendpar);
+ setUndo(bv(), Undo::DELETE, selection.start.par(),
+ boost::prior(undoendpit));
- // there are two cases: cut only within one paragraph or
- // more than one paragraph
- if (selection.start.par() == selection.end.par()) {
- // only within one paragraph
- endpar = &*selection.end.par();
- int pos = selection.end.pos();
- CutAndPaste::cutSelection(&*selection.start.par(), &endpar,
- selection.start.pos(), pos,
- bv()->buffer()->params.textclass,
- doclear, realcut);
- selection.end.pos(pos);
- } else {
- endpar = &*selection.end.par();
- int pos = selection.end.pos();
- CutAndPaste::cutSelection(&*selection.start.par(), &endpar,
- selection.start.pos(), pos,
- bv()->buffer()->params.textclass,
- doclear, realcut);
- cursor.par(endpar);
- selection.end.par(endpar);
- selection.end.pos(pos);
- cursor.pos(selection.end.pos());
- }
- endpar = endpar->next();
+ endpit = selection.end.par();
+ int endpos = selection.end.pos();
+
+ boost::tie(endpit, endpos) = realcut ?
+ CutAndPaste::cutSelection(bv()->buffer()->params,
+ ownerParagraphs(),
+ selection.start.par(), endpit,
+ selection.start.pos(), endpos,
+ bv()->buffer()->params.textclass,
+ doclear)
+ : CutAndPaste::eraseSelection(bv()->buffer()->params,
+ ownerParagraphs(),
+ selection.start.par(), endpit,
+ selection.start.pos(), endpos,
+ doclear);
// sometimes necessary
if (doclear)
selection.start.par()->stripLeadingSpaces();
- redoParagraphs(selection.start, endpar);
-
+ redoParagraphs(selection.start, boost::next(endpit));
+#warning FIXME latent bug
+ // endpit will be invalidated on redoParagraphs once ParagraphList
+ // becomes a std::list? There are maybe other places on which this
+ // can happend? (Ab)
// cutSelection can invalidate the cursor so we need to set
// it anew. (Lgb)
// we prefer the end for when tracking changes
- cursor = selection.end;
+ cursor.pos(endpos);
+ cursor.par(endpit);
// need a valid cursor. (Lgb)
clearSelection();
|| selection.start.pos() < selection.end.pos()))
selection.start.pos(selection.start.pos() + 1);
- CutAndPaste::copySelection(&*selection.start.par(),
- &*selection.end.par(),
+ CutAndPaste::copySelection(selection.start.par(),
+ selection.end.par(),
selection.start.pos(), selection.end.pos(),
bv()->buffer()->params.textclass);
}
-void LyXText::pasteSelection()
+void LyXText::pasteSelection(size_t sel_index)
{
// this does not make sense, if there is nothing to paste
if (!CutAndPaste::checkPastePossible())
return;
- setUndo(bv(), Undo::INSERT,
- &*cursor.par(), &*boost::next(cursor.par()));
+ setUndo(bv(), Undo::INSERT, cursor.par());
- Paragraph * endpar;
- ParagraphList::iterator actpit = cursor.par();
- int pos = cursor.pos();
+ ParagraphList::iterator endpit;
+ PitPosPair ppp;
- Paragraph * actpar = &*actpit;
- CutAndPaste::pasteSelection(&actpar, &endpar, pos,
- bv()->buffer()->params.textclass);
+ ErrorList el;
- redoParagraphs(cursor, endpar);
+ boost::tie(ppp, endpit) =
+ CutAndPaste::pasteSelection(*bv()->buffer(),
+ ownerParagraphs(),
+ cursor.par(), cursor.pos(),
+ bv()->buffer()->params.textclass,
+ sel_index, el);
+ bv()->setErrorList(el);
+ bv()->showErrorList(_("Paste"));
+
+ redoParagraphs(cursor, endpit);
setCursor(cursor.par(), cursor.pos());
clearSelection();
selection.cursor = cursor;
- setCursor(actpit, pos);
+ setCursor(ppp.first, ppp.second);
setSelection();
updateCounters();
}
selection.start.pos());
// Insert the new string
- for (string::const_iterator cit = str.begin(); cit != str.end(); ++cit) {
+ string::const_iterator cit = str.begin();
+ string::const_iterator end = str.end();
+ for (; cit != end; ++cit) {
selection.end.par()->insertChar(pos, (*cit), font);
++pos;
}
// only to be sure, should not be neccessary
clearSelection();
- Paragraph * par = &*pit;
- bv()->buffer()->insertStringAsLines(par, pos, current_font, str);
+ bv()->buffer()->insertStringAsLines(pit, pos, current_font, str);
- redoParagraphs(cursor, &*endpit);
+ redoParagraphs(cursor, endpit);
setCursor(cursor.par(), cursor.pos());
selection.cursor = cursor;
setCursor(pit, pos);
{
string linestr(str);
bool newline_inserted = false;
- for (string::size_type i = 0; i < linestr.length(); ++i) {
+ string::size_type const siz = linestr.length();
+
+ for (string::size_type i = 0; i < siz; ++i) {
if (linestr[i] == '\n') {
if (newline_inserted) {
// we know that \r will be ignored by
}
-void LyXText::checkParagraph(Paragraph * par, pos_type pos)
+void LyXText::checkParagraph(ParagraphList::iterator pit, pos_type pos)
{
LyXCursor tmpcursor;
int y = 0;
pos_type z;
- RowList::iterator row = getRow(par, pos, y);
+ RowList::iterator row = getRow(pit, pos, y);
RowList::iterator beg = rows().begin();
// is there a break one row above
}
// check the special right address boxes
- if (par->layout()->margintype == MARGIN_RIGHT_ADDRESS_BOX) {
- tmpcursor.par(par);
+ if (pit->layout()->margintype == MARGIN_RIGHT_ADDRESS_BOX) {
+ tmpcursor.par(pit);
tmpcursor.row(row);
tmpcursor.y(y);
tmpcursor.x(0);
// first check the current paragraph
int pos = cursor.par()->getPositionOfInset(inset);
if (pos != -1) {
- checkParagraph(&*cursor.par(), pos);
+ checkParagraph(cursor.par(), pos);
return true;
}
ParagraphList::iterator par = ownerParagraphs().begin();
ParagraphList::iterator end = ownerParagraphs().end();
-
- do {
+ for (; par != end; ++par) {
pos = par->getPositionOfInset(inset);
if (pos != -1) {
- checkParagraph(&*par, pos);
+ checkParagraph(par, pos);
return true;
}
- ++par;
- } while (par != end);
+ };
return false;
}
// get the cursor y position in text
int y = 0;
- RowList::iterator row = getRow(&*pit, pos, y);
+ RowList::iterator row = getRow(pit, pos, y);
RowList::iterator beg = rows().begin();
RowList::iterator old_row = row;
// same paragraph and there is a previous row then put the cursor on
// the end of the previous row
cur.iy(y + row->baseline());
- Inset * ins;
- if (row != beg && pos &&
- boost::prior(row)->par() == row->par() &&
+ if (row != beg &&
+ pos &&
+ boost::prior(row)->par() == row->par() &&
pos < pit->size() &&
- pit->getChar(pos) == Paragraph::META_INSET &&
- (ins = pit->getInset(pos)) && (ins->needFullRow() || ins->display()))
- {
- --row;
- y -= row->height();
+ pit->getChar(pos) == Paragraph::META_INSET) {
+ Inset * ins = pit->getInset(pos);
+ if (ins && (ins->needFullRow() || ins->display())) {
+ --row;
+ y -= row->height();
+ }
}
cur.row(row);
prepareToPrint(rit, x, fill_separator, fill_hfill,
fill_label_hfill);
- if (last < rit->pos())
- cursor_vpos = rit->pos();
+ ParagraphList::iterator rit_par = rit->par();
+ pos_type const rit_pos = rit->pos();
+
+ if (last < rit_pos)
+ cursor_vpos = rit_pos;
else if (pos > last && !boundary)
- cursor_vpos = (rit->par()->isRightToLeftPar(bv()->buffer()->params))
- ? rit->pos() : last + 1;
- else if (pos > rit->pos() &&
- (pos > last || boundary))
+ cursor_vpos = (rit_par->isRightToLeftPar(bv()->buffer()->params))
+ ? rit_pos : last + 1;
+ else if (pos > rit_pos && (pos > last || boundary))
/// Place cursor after char at (logical) position pos - 1
cursor_vpos = (bidi_level(pos - 1) % 2 == 0)
? log2vis(pos - 1) + 1 : log2vis(pos - 1);
cursor_vpos = (bidi_level(pos) % 2 == 0)
? log2vis(pos) : log2vis(pos) + 1;
- pos_type body_pos = rit->par()->beginningOfBody();
+ pos_type body_pos = rit_par->beginningOfBody();
if ((body_pos > 0) &&
- ((body_pos - 1 > last) ||
- !rit->par()->isLineSeparator(body_pos - 1)))
+ ((body_pos - 1 > last) || !rit_par->isLineSeparator(body_pos - 1)))
body_pos = 0;
- for (pos_type vpos = rit->pos(); vpos < cursor_vpos; ++vpos) {
+ for (pos_type vpos = rit_pos; vpos < cursor_vpos; ++vpos) {
pos_type pos = vis2log(vpos);
if (body_pos > 0 && pos == body_pos - 1) {
x += fill_label_hfill +
font_metrics::width(
- rit->par()->layout()->labelsep,
- getLabelFont(bv()->buffer(),
- &*rit->par()));
- if (rit->par()->isLineSeparator(body_pos - 1))
- x -= singleWidth(rit->par(), body_pos - 1);
+ rit_par->layout()->labelsep,
+ getLabelFont(bv()->buffer(), rit_par));
+ if (rit_par->isLineSeparator(body_pos - 1))
+ x -= singleWidth(rit_par, body_pos - 1);
}
if (hfillExpansion(*this, rit, pos)) {
- x += singleWidth(rit->par(), pos);
+ x += singleWidth(rit_par, pos);
if (pos >= body_pos)
x += fill_hfill;
else
x += fill_label_hfill;
- } else if (rit->par()->isSeparator(pos)) {
- x += singleWidth(rit->par(), pos);
+ } else if (rit_par->isSeparator(pos)) {
+ x += singleWidth(rit_par, pos);
if (pos >= body_pos)
x += fill_separator;
} else
- x += singleWidth(rit->par(), pos);
+ x += singleWidth(rit_par, pos);
}
return x;
}
void LyXText::setCursorIntern(ParagraphList::iterator pit,
pos_type pos, bool setfont, bool boundary)
{
- InsetText * it = static_cast<InsetText *>(pit->inInset());
+ UpdatableInset * it = pit->inInset();
if (it) {
if (it != inset_owner) {
lyxerr[Debug::INSETS] << "InsetText is " << it
void LyXText::setCurrentFont()
{
pos_type pos = cursor.pos();
+ ParagraphList::iterator pit = cursor.par();
+
if (cursor.boundary() && pos > 0)
--pos;
if (pos > 0) {
- if (pos == cursor.par()->size())
+ if (pos == pit->size())
--pos;
else // potentional bug... BUG (Lgb)
- if (cursor.par()->isSeparator(pos)) {
+ if (pit->isSeparator(pos)) {
if (pos > cursor.row()->pos() &&
bidi_level(pos) % 2 ==
bidi_level(pos - 1) % 2)
--pos;
- else if (pos + 1 < cursor.par()->size())
+ else if (pos + 1 < pit->size())
++pos;
}
}
current_font =
- cursor.par()->getFontSettings(bv()->buffer()->params, pos);
- real_current_font = getFont(bv()->buffer(), &*cursor.par(), pos);
+ pit->getFontSettings(bv()->buffer()->params, pos);
+ real_current_font = getFont(bv()->buffer(), pit, pos);
- if (cursor.pos() == cursor.par()->size() &&
- isBoundary(bv()->buffer(), &*cursor.par(), cursor.pos()) &&
+ if (cursor.pos() == pit->size() &&
+ isBoundary(bv()->buffer(), *pit, cursor.pos()) &&
!cursor.boundary()) {
Language const * lang =
- cursor.par()->getParLanguage(bv()->buffer()->params);
+ pit->getParLanguage(bv()->buffer()->params);
current_font.setLanguage(lang);
current_font.setNumber(LyXFont::OFF);
real_current_font.setLanguage(lang);
pos_type last = lastPrintablePos(*this, rit);
pos_type c = 0;
+ ParagraphList::iterator rit_par = rit->par();
LyXLayout_ptr const & layout = rit->par()->layout();
bool left_side = false;
- pos_type body_pos = rit->par()->beginningOfBody();
+ pos_type body_pos = rit_par->beginningOfBody();
float last_tmpx = tmpx;
if (body_pos > 0 &&
(body_pos - 1 > last ||
- !rit->par()->isLineSeparator(body_pos - 1)))
+ !rit_par->isLineSeparator(body_pos - 1)))
body_pos = 0;
// check for empty row
- if (!rit->par()->size()) {
+ if (!rit_par->size()) {
x = int(tmpx);
return 0;
}
if (body_pos > 0 && c == body_pos - 1) {
tmpx += fill_label_hfill +
font_metrics::width(layout->labelsep,
- getLabelFont(bv()->buffer(), &*rit->par()));
- if (rit->par()->isLineSeparator(body_pos - 1))
- tmpx -= singleWidth(rit->par(), body_pos - 1);
+ getLabelFont(bv()->buffer(), rit_par));
+ if (rit_par->isLineSeparator(body_pos - 1))
+ tmpx -= singleWidth(rit_par, body_pos - 1);
}
if (hfillExpansion(*this, rit, c)) {
- tmpx += singleWidth(rit->par(), c);
+ tmpx += singleWidth(rit_par, c);
if (c >= body_pos)
tmpx += fill_hfill;
else
tmpx += fill_label_hfill;
- } else if (rit->par()->isSeparator(c)) {
- tmpx += singleWidth(rit->par(), c);
+ } else if (rit_par->isSeparator(c)) {
+ tmpx += singleWidth(rit_par, c);
if (c >= body_pos)
tmpx+= fill_separator;
} else {
- tmpx += singleWidth(rit->par(), c);
+ tmpx += singleWidth(rit_par, c);
}
++vc;
}
boundary = false;
// This (rtl_support test) is not needed, but gives
// some speedup if rtl_support=false
+ RowList::iterator next_rit = boost::next(rit);
+
bool const lastrow = lyxrc.rtl_support &&
- (boost::next(rit) == rowlist_.end() ||
- boost::next(rit)->par() != rit->par());
+ (next_rit == rowlist_.end() ||
+ next_rit->par() != rit_par);
+
// If lastrow is false, we don't need to compute
// the value of rtl.
bool const rtl = (lastrow)
- ? rit->par()->isRightToLeftPar(bv()->buffer()->params)
+ ? rit_par->isRightToLeftPar(bv()->buffer()->params)
: false;
if (lastrow &&
((rtl && left_side && vc == rit->pos() && x < tmpx - 5) ||
bool const rtl = (bidi_level(c) % 2 == 1);
if (left_side == rtl) {
++c;
- boundary = isBoundary(bv()->buffer(), &*rit->par(), c);
+ boundary = isBoundary(bv()->buffer(), *rit_par, c);
}
}
if (rit->pos() <= last && c > last
- && rit->par()->isNewline(last)) {
+ && rit_par->isNewline(last)) {
if (bidi_level(last) % 2 == 0)
- tmpx -= singleWidth(rit->par(), last);
+ tmpx -= singleWidth(rit_par, last);
else
- tmpx += singleWidth(rit->par(), last);
+ tmpx += singleWidth(rit_par, last);
c = last;
}
* and the next row is filled by an inset that spans an entire
* row.
*/
- bool beforeFullRowInset(LyXText & lt, RowList::iterator row,
- LyXCursor & cur) {
+ bool beforeFullRowInset(LyXText & lt, LyXCursor const & cur)
+ {
+ RowList::iterator row = cur.row();
if (boost::next(row) == lt.rows().end())
return false;
+
Row const & next = *boost::next(row);
if (next.pos() != cur.pos() || next.par() != cur.par())
return false;
- if (!cur.par()->isInset(cur.pos()))
+
+ if (cur.pos() == cur.par()->size()
+ || !cur.par()->isInset(cur.pos()))
return false;
+
Inset const * inset = cur.par()->getInset(cur.pos());
if (inset->needFullRow() || inset->display())
return true;
+
return false;
}
}
RowList::iterator row = getRowNearY(y);
bool bound = false;
pos_type const column = getColumnNearX(row, x, bound);
- cur.par(&*row->par());
+ cur.par(row->par());
cur.pos(row->pos() + column);
cur.x(x);
cur.y(y + row->baseline());
cur.row(row);
- if (beforeFullRowInset(*this, row, cur)) {
- pos_type last = lastPrintablePos(*this, row);
- float x = getCursorX(boost::next(row), cur.pos(), last, bound);
+ if (beforeFullRowInset(*this, cur)) {
+ pos_type const last = lastPrintablePos(*this, row);
+ RowList::iterator next_row = boost::next(row);
+
+ float x = getCursorX(next_row, cur.pos(), last, bound);
cur.ix(int(x));
- cur.iy(y + row->height() + boost::next(row)->baseline());
- cur.irow(boost::next(row));
+ cur.iy(y + row->height() + next_row->baseline());
+ cur.irow(next_row);
} else {
cur.iy(cur.y());
cur.ix(cur.x());
bool boundary = cursor.boundary();
setCursor(cursor.par(), cursor.pos() - 1, true, false);
if (!internal && !boundary &&
- isBoundary(bv()->buffer(), &*cursor.par(), cursor.pos() + 1))
+ isBoundary(bv()->buffer(), *cursor.par(), cursor.pos() + 1))
setCursor(cursor.par(), cursor.pos() + 1, true, true);
- } else if (cursor.par()->previous()) { // steps into the above paragraph.
- Paragraph * par = cursor.par()->previous();
- setCursor(par, par->size());
+ } else if (cursor.par() != ownerParagraphs().begin()) { // steps into the above paragraph.
+ ParagraphList::iterator pit = boost::prior(cursor.par());
+ setCursor(pit, pit->size());
}
}
else if (!at_end) {
setCursor(cursor.par(), cursor.pos() + 1, true, false);
if (!internal &&
- isBoundary(bv()->buffer(), &*cursor.par(), cursor.pos()))
+ isBoundary(bv()->buffer(), *cursor.par(), cursor.pos()))
setCursor(cursor.par(), cursor.pos(), true, true);
- } else if (cursor.par()->next())
- setCursor(cursor.par()->next(), 0);
+ } else if (boost::next(cursor.par()) != ownerParagraphs().end())
+ setCursor(boost::next(cursor.par()), 0);
}
y -= topy;
Inset * inset_hit = checkInsetHit(x, y1);
if (inset_hit && isHighlyEditableInset(inset_hit)) {
- inset_hit->edit(bv(), x, y - (y2 - y1), mouse_button::none);
+ inset_hit->localDispatch(
+ FuncRequest(bv(), LFUN_INSET_EDIT, x, y - (y2 - y1), mouse_button::none));
}
}
#else
y -= topy;
Inset * inset_hit = checkInsetHit(x, y1);
if (inset_hit && isHighlyEditableInset(inset_hit)) {
- inset_hit->edit(bv(), x, y - (y2 - y1), mouse_button::none);
+ FuncRequest cmd(bv(), LFUN_INSET_EDIT, x, y - (y2 - y1), mouse_button::none);
+ inset_hit->localDispatch(cmd);
}
}
#else
if (cursor.pos() > 0) {
setCursor(cursor.par(), 0);
}
- else if (cursor.par()->previous()) {
- setCursor(cursor.par()->previous(), 0);
+ else if (cursor.par() != ownerParagraphs().begin()) {
+ setCursor(boost::prior(cursor.par()), 0);
}
}
void LyXText::cursorDownParagraph()
{
- if (cursor.par()->next()) {
- setCursor(cursor.par()->next(), 0);
+ ParagraphList::iterator par = cursor.par();
+ ParagraphList::iterator next_par = boost::next(par);
+
+ if (next_par != ownerParagraphs().end()) {
+ setCursor(next_par, 0);
} else {
- setCursor(cursor.par(), cursor.par()->size());
+ setCursor(par, par->size());
}
}
&& old_cursor.par()->isLineSeparator(old_cursor.pos())
&& old_cursor.par()->isLineSeparator(old_cursor.pos() - 1)) {
old_cursor.par()->erase(old_cursor.pos() - 1);
- redoParagraphs(old_cursor, old_cursor.par()->next());
+ redoParagraphs(old_cursor, boost::next(old_cursor.par()));
#ifdef WITH_WARNINGS
#warning This will not work anymore when we have multiple views of the same buffer
}
// don't delete anything if this is the ONLY paragraph!
- if (!old_cursor.par()->next() && !old_cursor.par()->previous())
+ if (ownerParagraphs().size() == 1)
return false;
// Do not delete empty paragraphs with keepempty set.
- if (old_cursor.par()->layout()->keepempty)
+ if (old_cursor.par()->allowEmpty())
return false;
// only do our magic if we changed paragraph
// we can't possibly have deleted a paragraph before this point
bool deleted = false;
- if ((old_cursor.par()->empty()
- || (old_cursor.par()->size() == 1
- && old_cursor.par()->isLineSeparator(0)))) {
+ if (old_cursor.par()->empty() ||
+ (old_cursor.par()->size() == 1 &&
+ old_cursor.par()->isLineSeparator(0))) {
// ok, we will delete anything
LyXCursor tmpcursor;
deleted = true;
+ bool selection_position_was_oldcursor_position = (
+ selection.cursor.par() == old_cursor.par()
+ && selection.cursor.pos() == old_cursor.pos());
+
if (old_cursor.row() != rows().begin()) {
RowList::iterator
prevrow = boost::prior(old_cursor.row());
const_cast<LyXText *>(this)->postPaint(old_cursor.y() - old_cursor.row()->baseline() - prevrow->height());
tmpcursor = cursor;
cursor = old_cursor; // that undo can restore the right cursor position
- Paragraph * endpar = old_cursor.par()->next();
- if (endpar && endpar->getDepth()) {
- while (endpar && endpar->getDepth()) {
- endpar = endpar->next();
- }
+ #warning FIXME. --end() iterator is usable here
+ ParagraphList::iterator endpit = boost::next(old_cursor.par());
+ while (endpit != ownerParagraphs().end() &&
+ endpit->getDepth()) {
+ ++endpit;
}
- setUndo(bv(), Undo::DELETE, &*old_cursor.par(), endpar);
+
+ setUndo(bv(), Undo::DELETE, old_cursor.par(),
+ boost::prior(endpit));
cursor = tmpcursor;
// delete old row
removeRow(old_cursor.row());
- if (ownerParagraphs().begin() == old_cursor.par()) {
- ownerParagraph(&*boost::next(ownerParagraphs().begin()));
- }
-#warning FIXME Do the proper ParagraphList operation here (Lgb)
// delete old par
- delete &*old_cursor.par();
+ ownerParagraphs().erase(old_cursor.par());
/* Breakagain the next par. Needed because of
* the parindent that can occur or dissappear.
* The next row can change its height, if
* there is another layout before */
- if (boost::next(prevrow) != rows().end()) {
- breakAgain(boost::next(prevrow));
+ RowList::iterator tmprit = boost::next(prevrow);
+ if (tmprit != rows().end()) {
+ breakAgain(tmprit);
updateCounters();
}
setHeightOfRow(prevrow);
tmpcursor = cursor;
cursor = old_cursor; // that undo can restore the right cursor position
- Paragraph * endpar = old_cursor.par()->next();
- if (endpar && endpar->getDepth()) {
- while (endpar && endpar->getDepth()) {
- endpar = endpar->next();
- }
+#warning FIXME. --end() iterator is usable here
+ ParagraphList::iterator endpit = boost::next(old_cursor.par());
+ while (endpit != ownerParagraphs().end() &&
+ endpit->getDepth()) {
+ ++endpit;
}
- setUndo(bv(), Undo::DELETE, &*old_cursor.par(), endpar);
+
+ setUndo(bv(), Undo::DELETE, old_cursor.par(), boost::prior(endpit));
cursor = tmpcursor;
// delete old row
removeRow(old_cursor.row());
// delete old par
- if (ownerParagraphs().begin() == old_cursor.par()) {
- ownerParagraph(&*boost::next(ownerParagraphs().begin()));
- }
-#warning FIXME Do the proper ParagraphList operations here. (Lgb)
- delete &*old_cursor.par();
+ ownerParagraphs().erase(old_cursor.par());
/* Breakagain the next par. Needed because of
the parindent that can occur or dissappear.
// correct cursor y
setCursorIntern(cursor.par(), cursor.pos());
- if (selection.cursor.par() == old_cursor.par()
- && selection.cursor.pos() == old_cursor.pos()) {
+ if (selection_position_was_oldcursor_position) {
// correct selection
selection.cursor = cursor;
}
}
if (!deleted) {
if (old_cursor.par()->stripLeadingSpaces()) {
- redoParagraphs(old_cursor,
- old_cursor.par()->next());
+ redoParagraphs(old_cursor, boost::next(old_cursor.par()));
// correct cursor y
setCursorIntern(cursor.par(), cursor.pos());
selection.cursor = cursor;
}
-void LyXText::ownerParagraph(Paragraph * p) const
-{
- if (inset_owner) {
- inset_owner->paragraph(p);
- } else {
- bv_owner->buffer()->paragraphs.set(p);
- }
-}
-
-
-void LyXText::ownerParagraph(int id, Paragraph * p) const
-{
- Paragraph * op = bv_owner->buffer()->getParFromID(id);
- if (op && op->inInset()) {
- static_cast<InsetText *>(op->inInset())->paragraph(p);
- } else {
- ownerParagraph(p);
- }
-}
-
-
LyXText::refresh_status LyXText::refreshStatus() const
{
return refresh_status_;