-/* This file is part of
- * ======================================================
+/**
+ * \file lyx_cb.C
+ * This file is part of LyX, the document processor.
+ * Licence details can be found in the file COPYING.
*
- * LyX, The Document Processor
+ * \author Lars Gullik Bjønnes
+ * \author Angus Leeming
+ * \author John Levon
+ * \author André Pönitz
+ * \author Jürgen Vigna
*
- * Copyright 1995 Matthias Ettrich,
- * Copyright 1995-2001 The LyX Team.
- *
- * ====================================================== */
+ * Full author contact details are available in file CREDITS.
+ */
#include <config.h>
#include "lyx_cb.h"
-#include "lyx_main.h"
+
#include "buffer.h"
#include "bufferlist.h"
-#include "bufferview_funcs.h"
+#include "BufferView.h"
+#include "cursor.h"
#include "debug.h"
+#include "gettext.h"
#include "lastfiles.h"
+#include "lyx_main.h"
+#include "lyxlayout.h"
#include "lyxrc.h"
#include "lyxtext.h"
-#include "gettext.h"
-#include "BufferView.h"
-
-#include "insets/insetlabel.h"
+#include "paragraph.h"
-#include "frontends/lyx_gui.h"
-#include "frontends/LyXView.h"
#include "frontends/Alert.h"
#include "frontends/FileDialog.h"
+#include "frontends/lyx_gui.h"
+#include "frontends/LyXView.h"
+#include "support/filefilterlist.h"
#include "support/FileInfo.h"
#include "support/filetools.h"
#include "support/forkedcall.h"
+#include "support/lyxlib.h"
+#include "support/package.h"
#include "support/path.h"
#include "support/systemcall.h"
-#include "support/lstrings.h"
-#include "BoostFormat.h"
+#include <boost/shared_ptr.hpp>
-#include <fstream>
-#include <algorithm>
-#include <utility>
#include <cerrno>
+#include <fstream>
-using std::vector;
-using std::ifstream;
+using lyx::support::AddName;
+using lyx::support::bformat;
+using lyx::support::destroyDir;
+using lyx::support::FileFilterList;
+using lyx::support::FileInfo;
+using lyx::support::ForkedProcess;
+using lyx::support::IsLyXFilename;
+using lyx::support::LibFileSearch;
+using lyx::support::MakeAbsPath;
+using lyx::support::MakeDisplayPath;
+using lyx::support::OnlyFilename;
+using lyx::support::OnlyPath;
+using lyx::support::Path;
+using lyx::support::package;
+using lyx::support::QuoteName;
+using lyx::support::removeAutosaveFile;
+using lyx::support::rename;
+using lyx::support::split;
+using lyx::support::Systemcall;
+using lyx::support::tempName;
+using lyx::support::unlink;
+
+using boost::shared_ptr;
+
+using std::back_inserter;
using std::copy;
using std::endl;
+using std::make_pair;
+using std::string;
+using std::ifstream;
using std::ios;
-using std::back_inserter;
using std::istream_iterator;
-using std::pair;
-using std::make_pair;
+
extern BufferList bufferlist;
// this should be static, but I need it in buffer.C
bool quitting; // flag, that we are quitting the program
-void ShowMessage(Buffer const * buf,
- string const & msg1,
- string const & msg2,
- string const & msg3)
-{
- if (lyxrc.use_gui
- && buf && buf->getUser() && buf->getUser()->owner()) {
- string const str = msg1 + ' ' + msg2 + ' ' + msg3;
- buf->getUser()->owner()->message(str);
- } else
- lyxerr << msg1 << msg2 << msg3 << endl;
-}
-
-
//
// Menu callbacks
//
-bool MenuWrite(BufferView * bv, Buffer * buffer)
+bool MenuWrite(Buffer * buffer)
{
if (buffer->save()) {
- lastfiles->newFile(buffer->fileName());
+ LyX::ref().lastfiles().newFile(buffer->fileName());
return true;
}
string const file = MakeDisplayPath(buffer->fileName(), 30);
-#if USE_BOOST_FORMAT
- boost::format fmt(_("The document %1$s could not be saved.\n\nDo you want to rename the document and try again?"));
- fmt % file;
- string text = fmt.str();
-#else
- string text = _("The document ");
- text += file + _(" could not be saved.\n\nDo you want to rename the document and try again?");
-#endif
+ string text = bformat(_("The document %1$s could not be saved.\n\n"
+ "Do you want to rename the document and try again?"), file);
int const ret = Alert::prompt(_("Rename and save?"),
- text, 0, _("&Rename"), _("&Cancel"));
+ text, 0, 1, _("&Rename"), _("&Cancel"));
if (ret == 0)
- return WriteAs(bv, buffer);
+ return WriteAs(buffer);
return false;
}
-bool WriteAs(BufferView * bv, Buffer * buffer, string const & filename)
+bool WriteAs(Buffer * buffer, string const & filename)
{
string fname = buffer->fileName();
string const oldname = fname;
if (!IsLyXFilename(fname))
fname += ".lyx";
+ FileFilterList const filter (_("LyX Documents (*.lyx)"));
+
FileDialog::Result result =
fileDlg.save(OnlyPath(fname),
- _("*.lyx| LyX Documents (*.lyx)"),
- OnlyFilename(fname));
+ filter,
+ OnlyFilename(fname));
if (result.first == FileDialog::Later)
return false;
FileInfo const myfile(fname);
if (myfile.isOK()) {
string const file = MakeDisplayPath(fname, 30);
-
-#if USE_BOOST_FORMAT
- boost::format fmt(_("The document %1$s already exists.\n\nDo you want to over-write that document?"));
- fmt % file;
- string text = fmt.str();
-#else
- string text = _("The document ");
- text += file + _(" already exists.\n\nDo you want to over-write that document?");
-#endif
+ string text = bformat(_("The document %1$s already exists.\n\n"
+ "Do you want to over-write that document?"), file);
int const ret = Alert::prompt(_("Over-write document?"),
- text, 1, _("&Over-write"), _("&Cancel"));
+ text, 0, 1, _("&Over-write"), _("&Cancel"));
if (ret == 1)
return false;
bool unnamed = buffer->isUnnamed();
buffer->setUnnamed(false);
- if (!MenuWrite(bv, buffer)) {
+ if (!MenuWrite(buffer)) {
buffer->setFileName(oldname);
buffer->setUnnamed(unnamed);
return false;
{
lyxerr[Debug::INFO] << "Running QuitLyX." << endl;
- if (lyxrc.use_gui) {
+ if (lyx_gui::use_gui) {
if (!bufferlist.quitWriteAll())
return;
- lastfiles->writeFile(lyxrc.lastfiles);
+ LyX::cref().lastfiles().writeFile(lyxrc.lastfiles);
}
// Set a flag that we do quitting from the program,
bufferlist.closeAll();
// do any other cleanup procedures now
- lyxerr[Debug::INFO] << "Deleting tmp dir " << system_tempdir << endl;
+ lyxerr[Debug::INFO] << "Deleting tmp dir " << package().temp_dir() << endl;
- if (destroyDir(system_tempdir) != 0) {
-#if USE_BOOST_FORMAT
- boost::format fmt = _("Could not remove the temporary directory %1$s");
- fmt % system_tempdir;
- string msg = fmt.str();
-#else
- string msg = _("Could not remove the temporary directory ") + system_tempdir;
-#endif
+ if (destroyDir(package().temp_dir()) != 0) {
+ string msg = bformat(_("Could not remove the temporary directory %1$s"),
+ package().temp_dir());
Alert::warning(_("Could not remove temporary directory"), msg);
}
AutoSaveBuffer(BufferView & bv, string const & fname)
: bv_(bv), fname_(fname) {}
///
- virtual ForkedProcess * clone() const {
- return new AutoSaveBuffer(*this);
+ virtual shared_ptr<ForkedProcess> clone() const
+ {
+ return shared_ptr<ForkedProcess>(new AutoSaveBuffer(*this));
}
///
int start();
int AutoSaveBuffer::start()
{
-#if USE_BOOST_FORMAT
- command_ = boost::io::str(boost::format(_("Auto-saving %1$s")) % fname_);
-#else
- command_ = _("Auto-saving ") + fname_;
-#endif
- return runNonBlocking();
+ command_ = bformat(_("Auto-saving %1$s"), fname_);
+ return run(DontWait);
}
// anyway.
bool failed = false;
- string const tmp_ret = lyx::tempName(string(), "lyxauto");
+ string const tmp_ret = tempName(string(), "lyxauto");
if (!tmp_ret.empty()) {
bv_.buffer()->writeFile(tmp_ret);
// assume successful write of tmp_ret
- if (!lyx::rename(tmp_ret, fname_)) {
+ if (!rename(tmp_ret, fname_)) {
failed = true;
// most likely couldn't move between filesystems
// unless write of tmp_ret failed
// so remove tmp file (if it exists)
- lyx::unlink(tmp_ret);
+ unlink(tmp_ret);
}
} else {
failed = true;
// create new file with template
// SERVERCMD !
//
-Buffer * NewFile(string const & filename)
+void NewFile(BufferView * bv, string const & filename)
{
// Split argument by :
string name;
<< "\nName is " << name
<< "\nTemplate is " << tmpname << endl;
- // find a free buffer
- Buffer * tmpbuf = bufferlist.newFile(name, tmpname);
- if (tmpbuf)
- lastfiles->newFile(tmpbuf->fileName());
- return tmpbuf;
+ bv->newFile(name, tmpname);
}
if (tmpstr.empty())
return;
- // insert the string
- bv->hideCursor();
-
// clear the selection
- bool flag = (bv->text == bv->getLyXText());
- if (flag)
- bv->beforeChange(bv->text);
- if (!asParagraph)
- bv->getLyXText()->insertStringAsLines(tmpstr);
+ if (bv->text() == bv->getLyXText())
+ bv->cursor().clearSelection();
+ if (asParagraph)
+ bv->getLyXText()->insertStringAsParagraphs(bv->cursor(), tmpstr);
else
- bv->getLyXText()->insertStringAsParagraphs(tmpstr);
- if (flag)
- bv->update(BufferView::SELECT);
+ bv->getLyXText()->insertStringAsLines(bv->cursor(), tmpstr);
+ bv->update();
}
FileDialog fileDlg(_("Select file to insert"),
(asParagraph) ? LFUN_FILE_INSERT_ASCII_PARA : LFUN_FILE_INSERT_ASCII);
- FileDialog::Result result = fileDlg.open(bv->owner()->buffer()->filePath());
+ FileDialog::Result result =
+ fileDlg.open(bv->owner()->buffer()->filePath(),
+ FileFilterList(), string());
if (result.first == FileDialog::Later)
return string();
if (!fi.readable()) {
string const error = strerror(errno);
string const file = MakeDisplayPath(fname, 50);
-#if USE_BOOST_FORMAT
- boost::format fmt(_("Could not read the specified document\n%1$s\ndue to the error: %2$s"));
- fmt % file;
- fmt % error;
- string text = fmt.str();
-#else
- string text = _("Could not read the specified document\n");
- text += file + _(" due to the error: ");
- text += error;
-#endif
+ string const text = bformat(_("Could not read the specified document\n"
+ "%1$s\ndue to the error: %2$s"), file, error);
Alert::error(_("Could not read file"), text);
return string();
}
if (!ifs) {
string const error = strerror(errno);
string const file = MakeDisplayPath(fname, 50);
-#if USE_BOOST_FORMAT
- boost::format fmt(_("Could not open the specified document\n%1$s\ndue to the error: %2$s"));
- fmt % file;
- fmt % error;
- string text = fmt.str();
-#else
- string text = _("Could not open the specified document\n");
- text += file + _(" due to the error: ");
- text += error;
-#endif
+ string const text = bformat(_("Could not open the specified document\n"
+ "%1$s\ndue to the error: %2$s"), file, error);
Alert::error(_("Could not open file"), text);
return string();
}
istream_iterator<char> end;
#if !defined(USE_INCLUDED_STRING) && !defined(STD_STRING_IS_GOOD)
// We use this until the compilers get better...
- vector<char> tmp;
+ std::vector<char> tmp;
copy(ii, end, back_inserter(tmp));
string const tmpstr(tmp.begin(), tmp.end());
#else
}
-string const getPossibleLabel(BufferView const & bv)
-{
- Paragraph * par = bv.getLyXText()->cursor.par();
- LyXLayout_ptr layout = par->layout();
- if (layout->latextype == LATEX_PARAGRAPH && par->previous()) {
- Paragraph * par2 = par->previous();
-
- LyXLayout_ptr const & layout2 = par2->layout();
-
- if (layout2->latextype != LATEX_PARAGRAPH) {
- par = par2;
- layout = layout2;
- }
- }
-
- string text = layout->latexname().substr(0, 3);
- if (layout->latexname() == "theorem")
- text = "thm"; // Create a correct prefix for prettyref
-
- text += ':';
- if (layout->latextype == LATEX_PARAGRAPH ||
- lyxrc.label_init_length < 0)
- text.erase();
-
- string par_text = par->asString(bv.buffer(), false);
- for (int i = 0; i < lyxrc.label_init_length; ++i) {
- if (par_text.empty())
- break;
- string head;
- par_text = split(par_text, head, ' ');
- if (i > 0)
- text += '-'; // Is it legal to use spaces in
- // labels ?
- text += head;
- }
-
- return text;
-}
-
-
// This function runs "configure" and then rereads lyx.defaults to
// reconfigure the automatic settings.
void Reconfigure(BufferView * bv)
bv->owner()->message(_("Running configure..."));
// Run configure in user lyx directory
- Path p(user_lyxdir);
+ Path p(package().user_support());
+ string const configure_script =
+ AddName(package().system_support(), "configure");
+ string const configure_command = "sh " + QuoteName(configure_script);
Systemcall one;
- one.startscript(Systemcall::Wait,
- AddName(system_lyxdir, "configure"));
+ one.startscript(Systemcall::Wait, configure_command);
p.pop();
bv->owner()->message(_("Reloading configuration..."));
lyxrc.read(LibFileSearch(string(), "lyxrc.defaults"));
Alert::information(_("System reconfigured"),
_("The system has been reconfigured.\n"
- "You need to restart LyX to make use of any \n"
+ "You need to restart LyX to make use of any\n"
"updated document class specifications."));
}