#include "cursor.h"
#include "debug.h"
#include "dispatchresult.h"
+#include "exporter.h"
#include "format.h"
#include "funcrequest.h"
+#include "FuncStatus.h"
#include "gettext.h"
#include "LaTeXFeatures.h"
-#include "lyx_main.h"
+#include "lyxlength.h"
#include "lyxlex.h"
#include "metricsinfo.h"
+#include "mover.h"
#include "outputparams.h"
+#include "sgml.h"
#include "frontends/Alert.h"
-#include "frontends/LyXView.h"
+#include "support/convert.h"
#include "support/filetools.h"
-#include "support/lyxalgo.h" // lyx::count
-#include "support/lyxlib.h" // float_equal
+#include "support/lyxalgo.h" // count
+#include "support/lyxlib.h" // sum
+#include "support/lstrings.h"
#include "support/os.h"
#include "support/systemcall.h"
-#include "support/tostr.h"
-#include "support/std_sstream.h"
#include <boost/bind.hpp>
#include <boost/tuple/tuple.hpp>
-namespace support = lyx::support;
-using lyx::support::AbsolutePath;
-using lyx::support::bformat;
-using lyx::support::ChangeExtension;
-using lyx::support::contains;
-using lyx::support::FileName;
-using lyx::support::float_equal;
-using lyx::support::GetExtension;
-using lyx::support::getExtFromContents;
-using lyx::support::IsFileReadable;
-using lyx::support::LibFileSearch;
-using lyx::support::rtrim;
-using lyx::support::subst;
-using lyx::support::Systemcall;
-using lyx::support::unzipFile;
-using lyx::support::unzippedFileName;
-
-namespace os = lyx::support::os;
+#include <sstream>
+
+
+namespace lyx {
+
+using support::bformat;
+using support::changeExtension;
+using support::compare_timestamps;
+using support::contains;
+using support::DocFileName;
+using support::FileName;
+using support::float_equal;
+using support::getExtension;
+using support::isFileReadable;
+using support::latex_path;
+using support::onlyFilename;
+using support::removeExtension;
+using support::rtrim;
+using support::subst;
+using support::Systemcall;
+using support::unzipFile;
+using support::unzippedFileName;
using std::endl;
using std::string;
namespace {
-///////////////////////////////////////////////////////////////////////////
-int const VersionNumber = 1;
-///////////////////////////////////////////////////////////////////////////
-
-// This function is a utility function
-// ... that should be with ChangeExtension ...
-inline
-string const RemoveExtension(string const & filename)
-{
- return ChangeExtension(filename, string());
-}
-
-
-string const uniqueID()
-{
- static unsigned int seed = 1000;
- return "graph" + tostr(++seed);
-}
-
-
-string findTargetFormat(string const & suffix, OutputParams const & runparams)
+/// Find the most suitable image format for images in \p format
+/// Note that \p format may be unknown (i. e. an empty string)
+string findTargetFormat(string const & format, OutputParams const & runparams)
{
- // Are we using latex or pdflatex).
+ // Are we using latex or pdflatex?
if (runparams.flavor == OutputParams::PDFLATEX) {
lyxerr[Debug::GRAPHICS] << "findTargetFormat: PDF mode" << endl;
- if (contains(suffix, "ps") || suffix == "pdf")
+ Format const * const f = formats.getFormat(format);
+ // Convert vector graphics to pdf
+ if (f && f->vectorFormat())
return "pdf";
- if (suffix == "jpg") // pdflatex can use jpeg
- return suffix;
- return "png"; // and also png
+ // pdflatex can use jpeg, png and pdf directly
+ if (format == "jpg")
+ return format;
+ // Convert everything else to png
+ return "png";
}
// If it's postscript, we always do eps.
lyxerr[Debug::GRAPHICS] << "findTargetFormat: PostScript mode" << endl;
- if (suffix != "ps") // any other than ps
- return "eps"; // is changed to eps
- return suffix; // let ps untouched
+ if (format != "ps")
+ // any other than ps is changed to eps
+ return "eps";
+ // let ps untouched
+ return format;
}
} // namespace anon
InsetGraphics::InsetGraphics()
- : graphic_label(uniqueID()),
+ : graphic_label(sgml::uniqueID(from_ascii("graph"))),
graphic_(new RenderGraphic(this))
{}
InsetGraphics::InsetGraphics(InsetGraphics const & ig)
: InsetOld(ig),
boost::signals::trackable(),
- graphic_label(uniqueID()),
+ graphic_label(sgml::uniqueID(from_ascii("graph"))),
graphic_(new RenderGraphic(*ig.graphic_, this))
{
setParams(ig.params());
}
-auto_ptr<InsetBase> InsetGraphics::clone() const
+auto_ptr<InsetBase> InsetGraphics::doClone() const
{
return auto_ptr<InsetBase>(new InsetGraphics(*this));
}
}
-void InsetGraphics::priv_dispatch(LCursor & cur, FuncRequest & cmd)
+void InsetGraphics::doDispatch(LCursor & cur, FuncRequest & cmd)
{
switch (cmd.action) {
- case LFUN_GRAPHICS_EDIT: {
+ case LFUN_GRAPHICS_EDIT: {
Buffer const & buffer = *cur.bv().buffer();
InsetGraphicsParams p;
- InsetGraphicsMailer::string2params(cmd.argument, buffer, p);
+ InsetGraphicsMailer::string2params(to_utf8(cmd.argument()), buffer, p);
editGraphics(p, buffer);
break;
}
case LFUN_INSET_MODIFY: {
Buffer const & buffer = cur.buffer();
InsetGraphicsParams p;
- InsetGraphicsMailer::string2params(cmd.argument, buffer, p);
- if (!p.filename.empty()) {
+ InsetGraphicsMailer::string2params(to_utf8(cmd.argument()), buffer, p);
+ if (!p.filename.empty())
setParams(p);
- cur.bv().update();
- }
+ else
+ cur.noUpdate();
break;
}
break;
default:
- InsetOld::priv_dispatch(cur, cmd);
+ InsetBase::doDispatch(cur, cmd);
break;
}
}
+bool InsetGraphics::getStatus(LCursor & cur, FuncRequest const & cmd,
+ FuncStatus & flag) const
+{
+ switch (cmd.action) {
+ case LFUN_GRAPHICS_EDIT:
+ case LFUN_INSET_MODIFY:
+ case LFUN_INSET_DIALOG_UPDATE:
+ flag.enabled(true);
+ return true;
+
+ default:
+ return InsetBase::getStatus(cur, cmd, flag);
+ }
+}
+
+
void InsetGraphics::edit(LCursor & cur, bool)
{
InsetGraphicsMailer(*this).showDialog(&cur.bv());
}
-void InsetGraphics::metrics(MetricsInfo & mi, Dimension & dim) const
+bool InsetGraphics::metrics(MetricsInfo & mi, Dimension & dim) const
{
graphic_->metrics(mi, dim);
+ bool const changed = dim_ != dim;
dim_ = dim;
+ return changed;
}
}
-InsetOld::EDITABLE InsetGraphics::editable() const
+InsetBase::EDITABLE InsetGraphics::editable() const
{
return IS_EDITABLE;
}
// before writing it to the output stream.
ostringstream options;
if (!params().bb.empty())
- options << " bb=" << rtrim(params().bb) << ",\n";
+ options << "bb=" << rtrim(params().bb) << ',';
if (params().draft)
- options << " draft,\n";
+ options << "draft,";
if (params().clip)
- options << " clip,\n";
- if (!float_equal(params().scale, 0.0, 0.05)) {
- if (!float_equal(params().scale, 100.0, 0.05))
- options << " scale=" << params().scale / 100.0
- << ",\n";
+ options << "clip,";
+ double const scl = convert<double>(params().scale);
+ if (!params().scale.empty() && !float_equal(scl, 0.0, 0.05)) {
+ if (!float_equal(scl, 100.0, 0.05))
+ options << "scale=" << scl / 100.0 << ',';
} else {
if (!params().width.zero())
- options << " width=" << params().width.asLatexString() << ",\n";
+ options << "width=" << params().width.asLatexString() << ',';
if (!params().height.zero())
- options << " height=" << params().height.asLatexString() << ",\n";
+ options << "height=" << params().height.asLatexString() << ',';
if (params().keepAspectRatio)
- options << " keepaspectratio,\n";
+ options << "keepaspectratio,";
}
// Make sure rotation angle is not very close to zero;
// a float can be effectively zero but not exactly zero.
- if (!float_equal(params().rotateAngle, 0, 0.001)) {
- options << " angle=" << params().rotateAngle << ",\n";
+ if (!params().rotateAngle.empty()
+ && !float_equal(convert<double>(params().rotateAngle), 0.0, 0.001)) {
+ options << "angle=" << params().rotateAngle << ',';
if (!params().rotateOrigin.empty()) {
- options << " origin=" << params().rotateOrigin[0];
+ options << "origin=" << params().rotateOrigin[0];
if (contains(params().rotateOrigin,"Top"))
options << 't';
else if (contains(params().rotateOrigin,"Bottom"))
options << 'b';
else if (contains(params().rotateOrigin,"Baseline"))
options << 'B';
- options << ",\n";
+ options << ',';
}
}
if (!params().special.empty())
- options << params().special << ",\n";
+ options << params().special << ',';
string opts = options.str();
- // delete last ",\n"
- return opts.substr(0, opts.size() - 2);
+ // delete last ','
+ return opts.substr(0, opts.size() - 1);
+}
+
+
+docstring const InsetGraphics::toDocbookLength(LyXLength const & len) const
+{
+ odocstringstream result;
+ switch (len.unit()) {
+ case LyXLength::SP: // Scaled point (65536sp = 1pt) TeX's smallest unit.
+ result << len.value() * 65536.0 * 72 / 72.27 << "pt";
+ break;
+ case LyXLength::PT: // Point = 1/72.27in = 0.351mm
+ result << len.value() * 72 / 72.27 << "pt";
+ break;
+ case LyXLength::BP: // Big point (72bp = 1in), also PostScript point
+ result << len.value() << "pt";
+ break;
+ case LyXLength::DD: // Didot point = 1/72 of a French inch, = 0.376mm
+ result << len.value() * 0.376 << "mm";
+ break;
+ case LyXLength::MM: // Millimeter = 2.845pt
+ result << len.value() << "mm";
+ break;
+ case LyXLength::PC: // Pica = 12pt = 4.218mm
+ result << len.value() << "pc";
+ break;
+ case LyXLength::CC: // Cicero = 12dd = 4.531mm
+ result << len.value() * 4.531 << "mm";
+ break;
+ case LyXLength::CM: // Centimeter = 10mm = 2.371pc
+ result << len.value() << "cm";
+ break;
+ case LyXLength::IN: // Inch = 25.4mm = 72.27pt = 6.022pc
+ result << len.value() << "in";
+ break;
+ case LyXLength::EX: // Height of a small "x" for the current font.
+ // Obviously we have to compromise here. Any better ratio than 1.5 ?
+ result << len.value() / 1.5 << "em";
+ break;
+ case LyXLength::EM: // Width of capital "M" in current font.
+ result << len.value() << "em";
+ break;
+ case LyXLength::MU: // Math unit (18mu = 1em) for positioning in math mode
+ result << len.value() * 18 << "em";
+ break;
+ case LyXLength::PTW: // Percent of TextWidth
+ case LyXLength::PCW: // Percent of ColumnWidth
+ case LyXLength::PPW: // Percent of PageWidth
+ case LyXLength::PLW: // Percent of LineWidth
+ case LyXLength::PTH: // Percent of TextHeight
+ case LyXLength::PPH: // Percent of Paper
+ // Sigh, this will go wrong.
+ result << len.value() << "%";
+ break;
+ default:
+ result << len.asDocstring();
+ break;
+ }
+ return result.str();
+}
+
+docstring const InsetGraphics::createDocBookAttributes() const
+{
+ // Calculate the options part of the command, we must do it to a string
+ // stream since we copied the code from createLatexParams() ;-)
+
+ // FIXME: av: need to translate spec -> Docbook XSL spec (http://www.sagehill.net/docbookxsl/ImageSizing.html)
+ // Right now it only works with my version of db2latex :-)
+
+ odocstringstream options;
+ double const scl = convert<double>(params().scale);
+ if (!params().scale.empty() && !float_equal(scl, 0.0, 0.05)) {
+ if (!float_equal(scl, 100.0, 0.05))
+ options << " scale=\""
+ << static_cast<int>( (scl) + 0.5 )
+ << "\" ";
+ } else {
+ if (!params().width.zero()) {
+ options << " width=\"" << toDocbookLength(params().width) << "\" ";
+ }
+ if (!params().height.zero()) {
+ options << " depth=\"" << toDocbookLength(params().height) << "\" ";
+ }
+ if (params().keepAspectRatio) {
+ // This will be irrelevant unless both width and height are set
+ options << "scalefit=\"1\" ";
+ }
+ }
+
+
+ if (!params().special.empty())
+ options << from_ascii(params().special) << " ";
+
+ // trailing blanks are ok ...
+ return options.str();
}
};
-std::pair<CopyStatus, string> const
-copyToDirIfNeeded(string const & file_in, string const & dir)
+std::pair<CopyStatus, FileName> const
+copyFileIfNeeded(FileName const & file_in, FileName const & file_out)
{
- using support::rtrim;
-
- BOOST_ASSERT(AbsolutePath(file_in));
-
- string const only_path = support::OnlyPath(file_in);
- if (rtrim(support::OnlyPath(file_in) , "/") == rtrim(dir, "/"))
- return std::make_pair(IDENTICAL_PATHS, file_in);
-
- string mangled;
- if (support::zippedFile(file_in)) {
- string const ext = GetExtension(file_in);
- string const unzipped = support::unzippedFileName(file_in);
- mangled = FileName(unzipped).mangledFilename();
- mangled += "." + ext;
- } else
- mangled = FileName(file_in).mangledFilename();
-
- string const file_out = support::MakeAbsPath(mangled, dir);
-
unsigned long const checksum_in = support::sum(file_in);
unsigned long const checksum_out = support::sum(file_out);
// Nothing to do...
return std::make_pair(IDENTICAL_CONTENTS, file_out);
- bool const success = support::copy(file_in, file_out);
+ Mover const & mover = movers(formats.getFormatFromFile(file_in));
+ bool const success = mover.copy(file_in, file_out);
if (!success) {
+ // FIXME UNICODE
lyxerr[Debug::GRAPHICS]
- << support::bformat(_("Could not copy the file\n%1$s\n"
- "into the temporary directory."),
- file_in)
+ << to_utf8(support::bformat(_("Could not copy the file\n%1$s\n"
+ "into the temporary directory."),
+ from_utf8(file_in.absFilename())))
<< std::endl;
}
}
+std::pair<CopyStatus, FileName> const
+copyToDirIfNeeded(DocFileName const & file, string const & dir)
+{
+ using support::rtrim;
+
+ string const file_in = file.absFilename();
+ string const only_path = support::onlyPath(file_in);
+ if (rtrim(support::onlyPath(file_in) , "/") == rtrim(dir, "/"))
+ return std::make_pair(IDENTICAL_PATHS, file_in);
+
+ string mangled = file.mangledFilename();
+ if (file.isZipped()) {
+ // We need to change _eps.gz to .eps.gz. The mangled name is
+ // still unique because of the counter in mangledFilename().
+ // We can't just call mangledFilename() with the zip
+ // extension removed, because base.eps and base.eps.gz may
+ // have different content but would get the same mangled
+ // name in this case.
+ string const base = removeExtension(file.unzippedFilename());
+ string::size_type const ext_len = file_in.length() - base.length();
+ mangled[mangled.length() - ext_len] = '.';
+ }
+ FileName const file_out(support::makeAbsPath(mangled, dir));
+
+ return copyFileIfNeeded(file, file_out);
+}
+
+
+string const stripExtensionIfPossible(string const & file)
+{
+ // Remove the extension so the LaTeX will use whatever
+ // is appropriate (when there are several versions in
+ // different formats)
+ // This works only if the filename contains no dots besides
+ // the just removed one. We can fool here by replacing all
+ // dots with a macro whose definition is just a dot ;-)
+ // The automatic format selection does not work if the file
+ // name is escaped.
+ string const latex_name = latex_path(file,
+ support::EXCLUDE_EXTENSION);
+ if (contains(latex_name, '"'))
+ return latex_name;
+ return latex_path(removeExtension(file),
+ support::PROTECT_EXTENSION,
+ support::ESCAPE_DOTS);
+}
+
+
string const stripExtensionIfPossible(string const & file, string const & to)
{
// No conversion is needed. LaTeX can handle the graphic file as is.
// This is true even if the orig_file is compressed.
- if (formats.getFormat(to)->extension() == GetExtension(file))
- return RemoveExtension(file);
- return file;
+ string const to_format = formats.getFormat(to)->extension();
+ string const file_format = getExtension(file);
+ // for latex .ps == .eps
+ if (to_format == file_format ||
+ (to_format == "eps" && file_format == "ps") ||
+ (to_format == "ps" && file_format == "eps"))
+ return stripExtensionIfPossible(file);
+ return latex_path(file, support::EXCLUDE_EXTENSION);
}
} // namespace anon
string const InsetGraphics::prepareFile(Buffer const & buf,
OutputParams const & runparams) const
{
- string orig_file = params().filename.absFilename();
- string const rel_file = params().filename.relFilename(buf.filePath());
-
- // LaTeX can cope if the graphics file doesn't exist, so just return the
- // filename.
- if (!IsFileReadable(orig_file)) {
- lyxerr[Debug::GRAPHICS]
- << "InsetGraphics::prepareFile\n"
- << "No file '" << orig_file << "' can be found!" << endl;
- return rel_file;
- }
+ // The following code depends on non-empty filenames
+ if (params().filename.empty())
+ return string();
- // If the file is compressed and we have specified that it
- // should not be uncompressed, then just return its name and
- // let LaTeX do the rest!
- bool const zipped = params().filename.isZipped();
+ string const orig_file = params().filename.absFilename();
+ string const rel_file = params().filename.relFilename(buf.filePath());
- if (zipped && params().noUnzip) {
- lyxerr[Debug::GRAPHICS]
- << "\tpass zipped file to LaTeX but with full path.\n";
- // LaTeX needs an absolute path, otherwise the
- // coresponding *.eps.bb file isn't found
- return orig_file;
- }
+ // previewing source code, no file copying or file format conversion
+ if (runparams.dryrun)
+ return stripExtensionIfPossible(rel_file);
// temp_file will contain the file for LaTeX to act on if, for example,
// we move it to a temp dir or uncompress it.
- string temp_file = orig_file;
+ FileName temp_file = params().filename;
+
+ // The master buffer. This is useful when there are multiple levels
+ // of include files
+ Buffer const * m_buffer = buf.getMasterBuffer();
+
+ // Return the output name if we are inside a comment or the file does
+ // not exist.
+ // We are not going to change the extension or using the name of the
+ // temporary file, the code is already complicated enough.
+ if (runparams.inComment || !isFileReadable(params().filename))
+ return params().filename.outputFilename(m_buffer->filePath());
// We place all temporary files in the master buffer's temp dir.
// This is possible because we use mangled file names.
// This is necessary for DVI export.
- string const temp_path = buf.getMasterBuffer()->temppath();
+ string const temp_path = m_buffer->temppath();
+
+ CopyStatus status;
+ boost::tie(status, temp_file) =
+ copyToDirIfNeeded(params().filename, temp_path);
+
+ if (status == FAILURE)
+ return orig_file;
- if (zipped) {
- CopyStatus status;
- boost::tie(status, temp_file) =
- copyToDirIfNeeded(orig_file, temp_path);
+ // a relative filename should be relative to the master
+ // buffer.
+ // "nice" means that the buffer is exported to LaTeX format but not
+ // run through the LaTeX compiler.
+ string output_file = support::os::external_path(runparams.nice ?
+ params().filename.outputFilename(m_buffer->filePath()) :
+ onlyFilename(temp_file.absFilename()));
+ FileName source_file = runparams.nice ? FileName(params().filename) : temp_file;
+ string const tex_format = (runparams.flavor == OutputParams::LATEX) ?
+ "latex" : "pdflatex";
- if (status == FAILURE)
- return orig_file;
+ // If the file is compressed and we have specified that it
+ // should not be uncompressed, then just return its name and
+ // let LaTeX do the rest!
+ if (params().filename.isZipped()) {
+ if (params().noUnzip) {
+ // We don't know whether latex can actually handle
+ // this file, but we can't check, because that would
+ // mean to unzip the file and thereby making the
+ // noUnzip parameter meaningless.
+ lyxerr[Debug::GRAPHICS]
+ << "\tpass zipped file to LaTeX.\n";
+
+ FileName const bb_orig_file = FileName(changeExtension(orig_file, "bb"));
+ if (runparams.nice) {
+ runparams.exportdata->addExternalFile(tex_format,
+ bb_orig_file,
+ changeExtension(output_file, "bb"));
+ } else {
+ // LaTeX needs the bounding box file in the
+ // tmp dir
+ FileName bb_file = FileName(changeExtension(temp_file.absFilename(), "bb"));
+ boost::tie(status, bb_file) =
+ copyFileIfNeeded(bb_orig_file, bb_file);
+ if (status == FAILURE)
+ return orig_file;
+ runparams.exportdata->addExternalFile(tex_format,
+ bb_file);
+ }
+ runparams.exportdata->addExternalFile(tex_format,
+ source_file, output_file);
+ runparams.exportdata->addExternalFile("dvi",
+ source_file, output_file);
+ // We can't strip the extension, because we don't know
+ // the unzipped file format
+ return latex_path(output_file,
+ support::EXCLUDE_EXTENSION);
+ }
- orig_file = unzippedFileName(temp_file);
- if (!IsFileReadable(orig_file)) {
- unzipFile(temp_file);
+ FileName const unzipped_temp_file =
+ FileName(unzippedFileName(temp_file.absFilename()));
+ output_file = unzippedFileName(output_file);
+ source_file = FileName(unzippedFileName(source_file.absFilename()));
+ if (compare_timestamps(unzipped_temp_file, temp_file) > 0) {
+ // temp_file has been unzipped already and
+ // orig_file has not changed in the meantime.
+ temp_file = unzipped_temp_file;
lyxerr[Debug::GRAPHICS]
- << "\tunzipped to " << orig_file << endl;
+ << "\twas already unzipped to " << temp_file
+ << endl;
+ } else {
+ // unzipped_temp_file does not exist or is too old
+ temp_file = unzipFile(temp_file);
+ lyxerr[Debug::GRAPHICS]
+ << "\tunzipped to " << temp_file << endl;
}
}
- string const from = getExtFromContents(orig_file);
+ string const from = formats.getFormatFromFile(temp_file);
+ if (from.empty()) {
+ lyxerr[Debug::GRAPHICS]
+ << "\tCould not get file format." << endl;
+ }
string const to = findTargetFormat(from, runparams);
+ string const ext = formats.extension(to);
lyxerr[Debug::GRAPHICS]
<< "\t we have: from " << from << " to " << to << '\n';
lyxerr[Debug::GRAPHICS]
<< "\tthe orig file is: " << orig_file << endl;
- bool conversion_needed = true;
- CopyStatus status;
- boost::tie(status, temp_file) =
- copyToDirIfNeeded(orig_file, temp_path);
-
- if (status == FAILURE)
- return orig_file;
- else if (status == IDENTICAL_CONTENTS)
- conversion_needed = false;
-
- if (from == to)
- return stripExtensionIfPossible(temp_file, to);
+ if (from == to) {
+ if (!runparams.nice && getExtension(temp_file.absFilename()) != ext) {
+ // The LaTeX compiler will not be able to determine
+ // the file format from the extension, so we must
+ // change it.
+ FileName const new_file = FileName(changeExtension(temp_file.absFilename(), ext));
+ if (support::rename(temp_file, new_file)) {
+ temp_file = new_file;
+ output_file = changeExtension(output_file, ext);
+ source_file = FileName(changeExtension(source_file.absFilename(), ext));
+ } else
+ lyxerr[Debug::GRAPHICS]
+ << "Could not rename file `"
+ << temp_file << "' to `" << new_file
+ << "'." << endl;
+ }
+ // The extension of temp_file might be != ext!
+ runparams.exportdata->addExternalFile(tex_format, source_file,
+ output_file);
+ runparams.exportdata->addExternalFile("dvi", source_file,
+ output_file);
+ return stripExtensionIfPossible(output_file, to);
+ }
- string const to_file_base = RemoveExtension(temp_file);
- string const to_file = ChangeExtension(to_file_base, to);
+ FileName const to_file = FileName(changeExtension(temp_file.absFilename(), ext));
+ string const output_to_file = changeExtension(output_file, ext);
// Do we need to perform the conversion?
// Yes if to_file does not exist or if temp_file is newer than to_file
- if (!conversion_needed ||
- support::compare_timestamps(temp_file, to_file) < 0) {
+ if (compare_timestamps(temp_file, to_file) < 0) {
+ // FIXME UNICODE
lyxerr[Debug::GRAPHICS]
- << bformat(_("No conversion of %1$s is needed after all"),
- rel_file)
+ << to_utf8(bformat(_("No conversion of %1$s is needed after all"),
+ from_utf8(rel_file)))
<< std::endl;
- return to_file_base;
+ runparams.exportdata->addExternalFile(tex_format, to_file,
+ output_to_file);
+ runparams.exportdata->addExternalFile("dvi", to_file,
+ output_to_file);
+ return stripExtensionIfPossible(output_file);
}
lyxerr[Debug::GRAPHICS]
<< "\tThe original file is " << orig_file << "\n"
<< "\tA copy has been made and convert is to be called with:\n"
<< "\tfile to convert = " << temp_file << '\n'
- << "\tto_file_base = " << to_file_base << '\n'
<< "\t from " << from << " to " << to << '\n';
- // if no special converter defined, then we take the default one
- // from ImageMagic: convert from:inname.from to:outname.to
- if (!converters.convert(&buf, temp_file, to_file_base, from, to)) {
- string const command =
- "sh " + LibFileSearch("scripts", "convertDefault.sh") +
- ' ' + from + ':' + temp_file + ' ' +
- to + ':' + to_file_base + '.' + to;
- lyxerr[Debug::GRAPHICS]
- << "No converter defined! I use convertDefault.sh:\n\t"
- << command << endl;
- Systemcall one;
- one.startscript(Systemcall::Wait, command);
- if (!IsFileReadable(ChangeExtension(to_file_base, to))) {
- string str = bformat(_("No information for converting %1$s "
- "format files to %2$s.\n"
- "Try defining a convertor in the preferences."), from, to);
- Alert::error(_("Could not convert image"), str);
- }
+ // FIXME (Abdel 12/08/06): Is there a need to show these errors?
+ ErrorList el;
+ if (converters.convert(&buf, temp_file, to_file, params().filename,
+ from, to, el,
+ Converters::try_default | Converters::try_cache)) {
+ runparams.exportdata->addExternalFile(tex_format,
+ to_file, output_to_file);
+ runparams.exportdata->addExternalFile("dvi",
+ to_file, output_to_file);
}
- return to_file_base;
+ return stripExtensionIfPossible(output_file);
}
-int InsetGraphics::latex(Buffer const & buf, ostream & os,
+int InsetGraphics::latex(Buffer const & buf, odocstream & os,
OutputParams const & runparams) const
{
- // The master buffer. This is useful when there are multiple levels
- // of include files
- Buffer const * m_buffer = buf.getMasterBuffer();
-
// If there is no file specified or not existing,
// just output a message about it in the latex output.
lyxerr[Debug::GRAPHICS]
string const relative_file =
params().filename.relFilename(buf.filePath());
- // A missing (e)ps-extension is no problem for LaTeX, so
- // we have to test three different cases
-#ifdef WITH_WARNINGS
-#warning uh, but can our cache handle it ? no.
-#endif
- string const file_ = params().filename.absFilename();
- bool const file_exists =
- !file_.empty() &&
- (IsFileReadable(file_) || // original
- IsFileReadable(file_ + ".eps") || // original.eps
- IsFileReadable(file_ + ".ps")); // original.ps
+ bool const file_exists = !params().filename.empty() &&
+ isFileReadable(params().filename);
string const message = file_exists ?
string() : string("bb = 0 0 200 100, draft, type=eps");
- // if !message.empty() than there was no existing file
- // "filename(.(e)ps)" found. In this case LaTeX
+ // if !message.empty() then there was no existing file
+ // "filename" found. In this case LaTeX
// draws only a rectangle with the above bb and the
// not found filename in it.
lyxerr[Debug::GRAPHICS]
string after;
// Do we want subcaptions?
if (params().subcaption) {
+ if (runparams.moving_arg)
+ before += "\\protect";
before += "\\subfigure[" + params().subcaptionText + "]{";
after = '}';
}
+
+ if (runparams.moving_arg)
+ before += "\\protect";
+
// We never use the starred form, we use the "clip" option instead.
before += "\\includegraphics";
lyxerr[Debug::GRAPHICS] << "\tOpts = " << opts << endl;
if (!opts.empty() && !message.empty())
- before += ("[%\n" + opts + ',' + message + ']');
+ before += ('[' + opts + ',' + message + ']');
else if (!opts.empty() || !message.empty())
- before += ("[%\n" + opts + message + ']');
+ before += ('[' + opts + message + ']');
lyxerr[Debug::GRAPHICS]
<< "\tBefore = " << before
<< "\n\tafter = " << after << endl;
-
string latex_str = before + '{';
- // "nice" means that the buffer is exported to LaTeX format but not
- // run through the LaTeX compiler.
- if (runparams.nice) {
- // a relative filename should be relative to the master
- // buffer.
- string basename = params().filename.outputFilename(m_buffer->filePath());
- // Remove the extension so the LaTeX will use whatever
- // is appropriate (when there are several versions in
- // different formats)
- if (!(IsFileReadable(file_ + ".eps") || IsFileReadable(file_ + ".ps")))
- basename = RemoveExtension(basename);
- // This works only if the filename contains no dots besides
- // the just removed one. We can fool here by replacing all
- // dots with a macro whose definition is just a dot ;-)
- latex_str += subst(basename, ".", "\\lyxdot ");
- } else if (file_exists) {
- // Make the filename relative to the lyx file
- // and remove the extension so the LaTeX will use whatever
- // is appropriate (when there are several versions in
- // different formats)
- latex_str += os::external_path(prepareFile(buf, runparams));
- } else
- latex_str += relative_file + " not found!";
-
+ // Convert the file if necessary.
+ // Remove the extension so LaTeX will use whatever is appropriate
+ // (when there are several versions in different formats)
+ latex_str += prepareFile(buf, runparams);
latex_str += '}' + after;
- os << latex_str;
+ // FIXME UNICODE
+ os << from_utf8(latex_str);
lyxerr[Debug::GRAPHICS] << "InsetGraphics::latex outputting:\n"
<< latex_str << endl;
// Return how many newlines we issued.
- return int(lyx::count(latex_str.begin(), latex_str.end(),'\n') + 1);
+ return int(lyx::count(latex_str.begin(), latex_str.end(),'\n'));
}
-int InsetGraphics::plaintext(Buffer const &, ostream & os,
+int InsetGraphics::plaintext(Buffer const &, odocstream & os,
OutputParams const &) const
{
// No graphics in ascii output. Possible to use gifscii to convert
// 1. Convert file to ascii using gifscii
// 2. Read ascii output file and add it to the output stream.
// at least we send the filename
+ // FIXME UNICODE
+ // FIXME: We have no idea what the encoding of the filename is
os << '<' << bformat(_("Graphics file: %1$s"),
- params().filename.absFilename()) << ">\n";
+ from_utf8(params().filename.absFilename()))
+ << ">\n";
return 0;
}
-int InsetGraphics::linuxdoc(Buffer const & buf, ostream & os,
- OutputParams const & runparams) const
-{
- string const file_name = runparams.nice ?
- params().filename.relFilename(buf.filePath()):
- params().filename.absFilename();
+namespace {
- os << "<eps file=\"" << file_name << "\">\n";
- os << "<img src=\"" << file_name << "\">";
- return 0;
+int writeImageObject(char * format, odocstream & os, OutputParams const & runparams,
+ docstring const graphic_label, docstring const attributes)
+{
+ if (runparams.flavor != OutputParams::XML) {
+ os << "<![ %output.print."
+ << format
+ << "; ["
+ << std::endl;
+ }
+ os <<"<imageobject><imagedata fileref=\"&"
+ << graphic_label
+ << ";."
+ << format
+ << "\" "
+ << attributes;
+ if (runparams.flavor == OutputParams::XML) {
+ os << " role=\"" << format << "\"/>" ;
+ }
+ else {
+ os << " format=\"" << format << "\">" ;
+ }
+ os << "</imageobject>";
+ if (runparams.flavor != OutputParams::XML) {
+ os << std::endl << "]]>" ;
+ }
+ return runparams.flavor == OutputParams::XML ? 0 : 2;
+}
+// end anonymous namespace
}
// For explanation on inserting graphics into DocBook checkout:
-// http://en.tldp.org/LDP/LDP-Author-Guide/inserting-pictures.html
+// http://en.tldp.org/LDP/LDP-Author-Guide/html/inserting-pictures.html
// See also the docbook guide at http://www.docbook.org/
-int InsetGraphics::docbook(Buffer const &, ostream & os,
- OutputParams const &) const
+int InsetGraphics::docbook(Buffer const &, odocstream & os,
+ OutputParams const & runparams) const
{
// In DocBook v5.0, the graphic tag will be eliminated from DocBook, will
// need to switch to MediaObject. However, for now this is sufficient and
// easier to use.
- os << "<graphic fileref=\"&" << graphic_label << ";\">";
- return 0;
+ if (runparams.flavor == OutputParams::XML) {
+ runparams.exportdata->addExternalFile("docbook-xml",
+ params().filename);
+ } else {
+ runparams.exportdata->addExternalFile("docbook",
+ params().filename);
+ }
+ os << "<inlinemediaobject>";
+
+ int r = 0;
+ docstring attributes = createDocBookAttributes();
+ r += writeImageObject("png", os, runparams, graphic_label, attributes);
+ r += writeImageObject("pdf", os, runparams, graphic_label, attributes);
+ r += writeImageObject("eps", os, runparams, graphic_label, attributes);
+ r += writeImageObject("bmp", os, runparams, graphic_label, attributes);
+
+ os << "</inlinemediaobject>";
+ return r;
}
return;
features.includeFile(graphic_label,
- RemoveExtension(params().filename.absFilename()));
+ removeExtension(params().filename.absFilename()));
features.require("graphicx");
- if (features.nice()) {
+ if (features.runparams().nice) {
Buffer const * m_buffer = features.buffer().getMasterBuffer();
- string basename =
- params().filename.outputFilename(m_buffer->filePath());
- string const file_ = params().filename.absFilename();
- if (!(IsFileReadable(file_ + ".eps") || IsFileReadable(file_ + ".ps")))
- basename = RemoveExtension(basename);
- if (contains(basename, "."))
+ string const rel_file = removeExtension(params().filename.relFilename(m_buffer->filePath()));
+ if (contains(rel_file, "."))
features.require("lyxdot");
}
}
-void InsetGraphics::editGraphics(InsetGraphicsParams const & p, Buffer const & buffer) const
+void InsetGraphics::editGraphics(InsetGraphicsParams const & p,
+ Buffer const & buffer) const
{
- string const file_with_path = p.filename.absFilename();
- formats.edit(buffer, file_with_path, getExtFromContents(file_with_path));
+ formats.edit(buffer, p.filename,
+ formats.getFormatFromFile(p.filename));
}
data << "\\end_inset\n";
return data.str();
}
+
+
+} // namespace lyx