* Licence details can be found in the file COPYING.
*
* \author Baruch Even
- * \author Herbert Voss
+ * \author Herbert Voß
* \author Rob Lahaye
*
- * Full author contact details are available in file CREDITS
+ * Full author contact details are available in file CREDITS.
*/
#include <config.h>
-#include "xformsBC.h"
-#include "ControlGraphics.h"
#include "FormGraphics.h"
+#include "ControlGraphics.h"
#include "forms/form_graphics.h"
+#include "controllers/helper_funcs.h"
+
#include "checkedwidgets.h"
#include "input_validators.h"
#include "Tooltips.h"
#include "xforms_helpers.h"
+#include "xformsBC.h"
-#include "debug.h" // for lyxerr
#include "lyxrc.h" // for lyxrc.display_graphics
#include "insets/insetgraphicsParams.h"
-#include "controllers/helper_funcs.h" // for getStringFromVector
-
#include "frontends/Alert.h"
-#include "support/tostr.h"
-#include "support/lstrings.h" // for strToDbl
#include "support/lyxlib.h" // for float_equal
-#include "support/filetools.h" // for MakeAbsPath etc
+#include "support/tostr.h"
+
+#include "lyx_forms.h"
-#include "support/BoostFormat.h"
+#include <cmath>
-#include FORMS_H_LOCATION
+#ifndef CXX_GLOBAL_CSTD
+using std::floor;
+#endif
using std::endl;
+
using std::vector;
+using std::string;
+namespace lyx {
+
+using support::bformat;
+using support::float_equal;
+using support::getStringFromVector;
+using support::strToDbl;
+using support::strToInt;
+using support::token;
+
+namespace frontend {
namespace {
bcview().setCancel(dialog_->button_close);
bcview().setRestore(dialog_->button_restore);
- // the file section
+ // The file section.
file_.reset(build_graphics_file(this));
- // disable for read-only documents
+ // Disable for read-only documents.
bcview().addReadOnly(file_->button_browse);
bcview().addReadOnly(file_->check_aspectratio);
bcview().addReadOnly(file_->check_draft);
bcview().addReadOnly(file_->check_nounzip);
- // check validity of "length + unit" input
+ // Check validity of "length + unit" input.
addCheckedGlueLength(bcview(), file_->input_width);
addCheckedGlueLength(bcview(), file_->input_height);
- // trigger an input event for cut&paste with middle mouse button.
+ // Trigger an input event for cut&paste with middle mouse button.
setPrehandler(file_->input_filename);
setPrehandler(file_->input_lyxscale);
setPrehandler(file_->input_width);
setPrehandler(file_->input_height);
- // for activate ok/apply immediately upon input
+ // Activate ok/apply immediately upon input.
fl_set_input_return(file_->input_filename, FL_RETURN_CHANGED);
fl_set_input_return(file_->input_lyxscale, FL_RETURN_CHANGED);
fl_set_input_return(file_->input_width, FL_RETURN_CHANGED);
fl_set_input_maxchars(file_->input_filename, FILENAME_MAXCHARS);
fl_set_input_filter(file_->input_lyxscale, fl_unsigned_int_filter);
- // width default is scaling: use unsigned float filter
+ // Width default is scaling: use unsigned float filter.
fl_set_input_filter(file_->input_width, fl_unsigned_float_filter);
fl_set_input_maxchars(file_->input_height, SIZE_MAXDIGITS);
_("Default|Monochrome|Grayscale|Color|Do not display");
fl_addto_choice(file_->choice_display, display_List.c_str());
- string const width_list = bformat(_("Scale%%%%|%1$s"), choice_Length_All);
- fl_addto_choice(file_->choice_width, width_list.c_str());
+ string const height_list = buildChoiceLengthString();
+ string const width_list = bformat(_("Scale%%%%|%1$s"), height_list);
- fl_addto_choice(file_->choice_height, choice_Length_All.c_str());
+ fl_addto_choice(file_->choice_width, width_list.c_str());
+ fl_addto_choice(file_->choice_height, height_list.c_str());
// set up the tooltips for the filesection
string str = _("The file you want to insert.");
fl_set_input_filter(bbox_->input_bb_y0, fl_unsigned_float_filter);
fl_set_input_filter(bbox_->input_bb_y1, fl_unsigned_float_filter);
- string const bb_units = getStringFromVector(frnt::getBBUnits(), "|");
+ string const bb_units = getStringFromVector(getBBUnits(), "|");
fl_addto_choice(bbox_->choice_bb_units, bb_units.c_str());
// set up the tooltips for the bounding-box-section
fl_set_input_filter(extra_->input_rotate_angle, fl_float_filter);
- using namespace frnt;
vector<RotationOriginPair> origindata = getRotationOriginData();
// Store the identifiers for later
fl_set_tabfolder_autofit(dialog_->tabfolder, FL_FIT);
// Stack tabs
- fl_addto_tabfolder(dialog_->tabfolder, _("File"), file_->form);
- fl_addto_tabfolder(dialog_->tabfolder, _("Bounding Box"), bbox_->form);
- fl_addto_tabfolder(dialog_->tabfolder, _("Extra"), extra_->form);
+ fl_addto_tabfolder(dialog_->tabfolder, _("File").c_str(),
+ file_->form);
+ fl_addto_tabfolder(dialog_->tabfolder, _("Bounding Box").c_str(),
+ bbox_->form);
+ fl_addto_tabfolder(dialog_->tabfolder, _("Extra").c_str(),
+ extra_->form);
// set the right default unit
switch (lyxrc.default_papersize) {
- case BufferParams::PAPER_DEFAULT: break;
- case BufferParams::PAPER_USLETTER:
- case BufferParams::PAPER_LEGALPAPER:
- case BufferParams::PAPER_EXECUTIVEPAPER: defaultUnit = "in"; break;
- case BufferParams::PAPER_A3PAPER:
- case BufferParams::PAPER_A4PAPER:
- case BufferParams::PAPER_A5PAPER:
- case BufferParams::PAPER_B5PAPER: defaultUnit = "cm"; break;
+ case PAPER_DEFAULT: break;
+ case PAPER_USLETTER:
+ case PAPER_LEGALPAPER:
+ case PAPER_EXECUTIVEPAPER: defaultUnit = "in"; break;
+ case PAPER_A3PAPER:
+ case PAPER_A4PAPER:
+ case PAPER_A5PAPER:
+ case PAPER_B5PAPER: defaultUnit = "cm"; break;
}
}
InsetGraphicsParams & igp = controller().params();
// the file section
- igp.filename = getString(file_->input_filename);
+ igp.filename.set(getString(file_->input_filename),
+ kernel().bufferFilepath());
igp.lyxscale = strToInt(getString(file_->input_lyxscale));
if (igp.lyxscale == 0) {
switch (fl_get_choice(file_->choice_display)) {
case 5:
- igp.display = grfx::NoDisplay;
+ igp.display = graphics::NoDisplay;
break;
case 4:
- igp.display = grfx::ColorDisplay;
+ igp.display = graphics::ColorDisplay;
break;
case 3:
- igp.display = grfx::GrayscaleDisplay;
+ igp.display = graphics::GrayscaleDisplay;
break;
case 2:
- igp.display = grfx::MonochromeDisplay;
+ igp.display = graphics::MonochromeDisplay;
break;
case 1:
- igp.display = grfx::DefaultDisplay;
+ igp.display = graphics::DefaultDisplay;
}
// first item in choice_width means scaling
if (fl_get_choice(file_->choice_width) == 1) {
igp.scale = strToDbl(getString(file_->input_width));
- if (lyx::float_equal(igp.scale, 0.0, 0.05)) {
+ if (float_equal(igp.scale, 0.0, 0.05)) {
igp.scale = 100.0;
}
igp.width = LyXLength();
igp.rotateAngle = strToDbl(getString(extra_->input_rotate_angle));
// map angle into -360 (clock-wise) to +360 (counter clock-wise)
- while (igp.rotateAngle <= -360.0) {
- igp.rotateAngle += 360.0;
- }
- while (igp.rotateAngle >= 360.0) {
- igp.rotateAngle -= 360.0;
- }
+ if (std::abs(igp.rotateAngle) > 360.0)
+ igp.rotateAngle -= 360.0 * floor(igp.rotateAngle / 360.0);
+
fl_set_input(extra_->input_rotate_angle, tostr(igp.rotateAngle).c_str());
int const origin_pos = fl_get_choice(extra_->choice_origin);
InsetGraphicsParams & igp = controller().params();
// the file section
- fl_set_input(file_->input_filename, igp.filename.c_str());
+ string const name =
+ igp.filename.outputFilename(kernel().bufferFilepath());
+ fl_set_input(file_->input_filename, name.c_str());
fl_set_input(file_->input_lyxscale, tostr(igp.lyxscale).c_str());
switch (igp.display) {
- case grfx::NoDisplay:
+ case graphics::NoDisplay:
fl_set_choice(file_->choice_display, 5);
break;
- case grfx::ColorDisplay:
+ case graphics::ColorDisplay:
fl_set_choice(file_->choice_display, 4);
break;
- case grfx::GrayscaleDisplay:
+ case graphics::GrayscaleDisplay:
fl_set_choice(file_->choice_display, 3);
break;
- case grfx::MonochromeDisplay:
+ case graphics::MonochromeDisplay:
fl_set_choice(file_->choice_display, 2);
break;
- case grfx::DefaultDisplay:
+ case graphics::DefaultDisplay:
fl_set_choice(file_->choice_display, 1);
}
// set width input fields according to scaling or width/height input
- if (!lyx::float_equal(igp.scale, 0.0, 0.05)) {
+ if (!float_equal(igp.scale, 0.0, 0.05)) {
fl_set_input_filter(file_->input_width, fl_unsigned_float_filter);
fl_set_input_maxchars(file_->input_width, 0);
fl_set_input(file_->input_width, tostr(igp.scale).c_str());
igp.height, defaultUnit);
// disable height input in case of scaling
- bool const disable_height = !lyx::float_equal(igp.scale, 0.0, 0.05);
+ bool const disable_height = !float_equal(igp.scale, 0.0, 0.05);
setEnabled(file_->input_height, !disable_height);
setEnabled(file_->choice_height, !disable_height);
// the bb section
// set the bounding box values, if exists. First we need the whole
// path, because the controller knows nothing about the doc-dir
- updateBB(igp.filename, igp.bb);
+ updateBB(igp.filename.absFilename(), igp.bb);
fl_set_button(bbox_->check_clip, igp.clip);
// the extra section
ButtonPolicy::SMInput FormGraphics::input(FL_OBJECT * ob, long)
{
+ ButtonPolicy::SMInput activate = ButtonPolicy::SMI_VALID;
+
// the file section
if (ob == file_->button_browse) {
+ activate = ButtonPolicy::SMI_NOOP;
+
// Get the filename from the dialog
string const in_name = getString(file_->input_filename);
- string const out_name = controller().Browse(in_name);
+ string const out_name = controller().browse(in_name);
lyxerr[Debug::GRAPHICS]
<< "[FormGraphics]out_name: " << out_name << endl;
if (out_name != in_name && !out_name.empty()) {
setEnabled(extra_->input_subcaption,
fl_get_button(extra_->check_subcaption));
+ } else if (ob == file_->button_edit) {
+ activate = ButtonPolicy::SMI_NOOP;
+ controller().editGraphics();
}
- return ButtonPolicy::SMI_VALID;
+
+ return activate;
}
+
+} // namespace frontend
+} // namespace lyx