* \author Angus Leeming
* \author John Levon
* \author Edwin Leuven
- * \author Herbert Voß
+ * \author Herbert Voß
* \author Richard Heck
*
* Full author contact details are available in file CREDITS.
#include <config.h>
#include "GuiGraphics.h"
-
-#include "debug.h"
-#include "LengthCombo.h"
-#include "Length.h"
-#include "LyXRC.h"
+#include "frontends/alert.h"
#include "qt_helpers.h"
#include "Validator.h"
+#include "Buffer.h"
#include "FuncRequest.h"
-#include "gettext.h"
+#include "LengthCombo.h"
+#include "Length.h"
+#include "LyXRC.h"
+#include "graphics/epstools.h"
#include "graphics/GraphicsCache.h"
#include "graphics/GraphicsCacheItem.h"
#include "graphics/GraphicsImage.h"
-#include "insets/InsetGraphicsParams.h"
+#include "insets/InsetGraphics.h"
#include "support/convert.h"
-#include "support/FileFilterList.h"
+#include "support/debug.h"
#include "support/filetools.h"
+#include "support/gettext.h"
#include "support/lstrings.h"
-#include "support/lyxlib.h"
#include "support/os.h"
#include "support/Package.h"
#include "support/types.h"
-#include <boost/bind.hpp>
-
#include <QCheckBox>
-#include <QCloseEvent>
#include <QLabel>
#include <QLineEdit>
#include <QPushButton>
#include <QValidator>
-#include <algorithm>
#include <cmath>
#include <utility>
-#ifndef CXX_GLOBAL_CSTD
-using std::floor;
-#endif
-using std::find;
-using std::vector;
-using std::string;
-using std::transform;
-using std::make_pair;
-using std::pair;
-using std::vector;
+using namespace std;
+using namespace lyx::support;
-namespace lyx {
-namespace frontend {
+namespace {
+
+// These are the strings that are stored in the LyX file and which
+// correspond to the LaTeX identifiers shown in the comments at the
+// end of each line.
+char const * const rorigin_lyx_strs[] = {
+ // the LaTeX default is leftBaseline
+ "",
+ "leftTop", "leftBottom", "leftBaseline", // lt lb lB
+ "center", "centerTop", "centerBottom", "centerBaseline", // c ct cb cB
+ "rightTop", "rightBottom", "rightBaseline" }; // rt rb rB
-using support::addName;
-using support::FileFilterList;
-using support::FileName;
-using support::float_equal;
-using support::makeAbsPath;
-using support::os::internal_path;
-using support::package;
-using support::readBB_from_PSFile;
-using support::token;
+// These are the strings, corresponding to the above, that the GUI should
+// use. Note that they can/should be translated.
+char const * const rorigin_gui_strs[] = {
+ N_("Default"),
+ N_("Top left"), N_("Bottom left"), N_("Baseline left"),
+ N_("Center"), N_("Top center"), N_("Bottom center"), N_("Baseline center"),
+ N_("Top right"), N_("Bottom right"), N_("Baseline right") };
+
+size_t const rorigin_size = sizeof(rorigin_lyx_strs) / sizeof(char *);
+static string const autostr = N_("automatically");
+
+} // namespace anon
+
+
+namespace lyx {
+namespace frontend {
//FIXME setAutoTextCB should really take an argument, as indicated, that
//determines what text is to be written for "auto". But making
//that work involves more extensive revisions than we now want
-//to make, since "auto" also appears in updateContents() (see
-//GuiGraphics.cpp).
+//to make, since "auto" also appears in paramsToDialog().
//The right way to do this, I think, would be to define a class
//checkedLengthSet (and a partnering labeledLengthSete) that encapsulated
//the checkbox, line edit, and length combo together, and then made e.g.
{
if (!checkBox->isChecked())
lengthToWidgets(lineEdit, lengthCombo,
- "auto", lengthCombo->currentLengthItem());
- else if (lineEdit->text() == "auto")
+ _(autostr), lengthCombo->currentLengthItem());
+ else if (lineEdit->text() == qt_(autostr))
lengthToWidgets(lineEdit, lengthCombo, string(),
lengthCombo->currentLengthItem());
}
-template<class Pair>
-vector<typename Pair::first_type> const
-getFirst(vector<Pair> const & pr)
-{
- vector<typename Pair::first_type> tmp(pr.size());
- transform(pr.begin(), pr.end(), tmp.begin(),
- boost::bind(&Pair::first, _1));
- return tmp;
-}
-///
-template<class Pair>
-vector<typename Pair::second_type> const
-getSecond(vector<Pair> const & pr)
-{
- vector<typename Pair::second_type> tmp(pr.size());
- transform(pr.begin(), pr.end(), tmp.begin(),
- boost::bind(&Pair::second, _1));
- return tmp;
-}
-
-/// The (tranlated) GUI std::string and it's LaTeX equivalent.
-typedef std::pair<docstring, std::string> RotationOriginPair;
-///
-std::vector<RotationOriginPair> getRotationOriginData();
-
-
-GuiGraphics::GuiGraphics(LyXView & lv)
- : GuiDialog(lv, "graphics")
+GuiGraphics::GuiGraphics(GuiView & lv)
+ : GuiDialog(lv, "graphics", qt_("Graphics")), bbChanged(false)
{
setupUi(this);
- setViewTitle(_("Graphics"));
-
+
//main buttons
connect(okPB, SIGNAL(clicked()), this, SLOT(slotOK()));
connect(applyPB, SIGNAL(clicked()), this, SLOT(slotApply()));
//graphics pane
connect(filename, SIGNAL(textChanged(const QString &)),
this, SLOT(change_adaptor()));
- connect(WidthCB, SIGNAL( clicked()),
+ connect(WidthCB, SIGNAL(clicked()),
this, SLOT(change_adaptor()));
- connect(HeightCB, SIGNAL( clicked()),
+ connect(HeightCB, SIGNAL(clicked()),
this, SLOT(change_adaptor()));
+ connect(Width, SIGNAL(textChanged(const QString &)),
+ this, SLOT(updateAspectRatioStatus()));
connect(Width, SIGNAL(textChanged(const QString &)),
this, SLOT(change_adaptor()));
+ connect(Height, SIGNAL(textChanged(const QString &)),
+ this, SLOT(updateAspectRatioStatus()));
connect(Height, SIGNAL(textChanged(const QString &)),
this, SLOT(change_adaptor()));
connect(heightUnit, SIGNAL(selectionChanged(lyx::Length::UNIT)),
filename->setValidator(new PathValidator(true, filename));
setFocusProxy(filename);
- QDoubleValidator * scaleValidator = new DoubleAutoValidator(Scale);
+ QDoubleValidator * scaleValidator =
+ new DoubleAutoValidator(Scale, qt_(autostr));
scaleValidator->setBottom(0);
scaleValidator->setDecimals(256); //I guess that will do
Scale->setValidator(scaleValidator);
- Height->setValidator(unsignedLengthAutoValidator(Height));
- Width->setValidator(unsignedLengthAutoValidator(Width));
+ Height->setValidator(unsignedLengthAutoValidator(Height, qt_(autostr)));
+ Width->setValidator(unsignedLengthAutoValidator(Width, qt_(autostr)));
angle->setValidator(new QDoubleValidator(-360, 360, 2, angle));
//clipping pane
connect(clip, SIGNAL(stateChanged(int)),
this, SLOT(change_adaptor()));
connect(lbY, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(lbYunit, SIGNAL(activated(int)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(rtY, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(rtYunit, SIGNAL(activated(int)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(lbX, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(lbXunit, SIGNAL(activated(int)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(rtX, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(rtXunit, SIGNAL(activated(int)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(getPB, SIGNAL(clicked()),
this, SLOT(change_adaptor()));
this, SLOT(change_adaptor()));
connect(draftCB, SIGNAL(stateChanged(int)),
this, SLOT(change_adaptor()));
- connect(unzipCB, SIGNAL(stateChanged(int)),
- this, SLOT(change_adaptor()));
// FIXME: we should connect to clicked() when we move to Qt 4.2 because
// the toggled(bool) signal is also trigged when we update the widgets
// (rgh-4/07) this isn't as much or a problem as it was, because we're now
// setChecked(). Note, too, that clicked() would get called whenever it
// is clicked, even right clicked (I think), not just whenever it is
// toggled.
- connect(subfigure, SIGNAL(toggled(bool)),
- this, SLOT(change_adaptor()));
- connect(subcaption, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_adaptor()));
- connect(displayGB, SIGNAL(toggled(bool)),
- this, SLOT(change_adaptor()));
- connect(showCB, SIGNAL(currentIndexChanged(int)),
- this, SLOT(change_adaptor()));
+ connect(displayGB, SIGNAL(toggled(bool)), this, SLOT(change_adaptor()));
connect(displayscale, SIGNAL(textChanged(const QString&)),
this, SLOT(change_adaptor()));
+ connect(groupCO, SIGNAL(currentIndexChanged(int)),
+ this, SLOT(changeGroup(int)));
+
displayscale->setValidator(new QIntValidator(displayscale));
bc().setPolicy(ButtonPolicy::NoRepeatedApplyReadOnlyPolicy);
bc().setCancel(closePB);
bc().addReadOnly(latexoptions);
- bc().addReadOnly(subfigure);
bc().addReadOnly(filenameL);
bc().addReadOnly(filename);
bc().addReadOnly(browsePB);
- bc().addReadOnly(unzipCB);
bc().addReadOnly(bbFrame);
bc().addReadOnly(draftCB);
bc().addReadOnly(clip);
- bc().addReadOnly(unzipCB);
bc().addReadOnly(displayGB);
bc().addReadOnly(sizeGB);
bc().addReadOnly(rotationGB);
}
-void GuiGraphics::change_bb()
+void GuiGraphics::changeGroup(int /* index */)
{
- bbChanged = true;
- LYXERR(Debug::GRAPHICS) << "[bb_Changed set to true]\n";
- changed();
-}
+ QString const new_group = groupCO->itemData(
+ groupCO->currentIndex()).toString();
+
+ // check if the old group consisted only of this member
+ if (current_group_ != fromqstr(new_group)
+ && graphics::countGroupMembers(buffer(), current_group_) == 1) {
+ if (!new_group.isEmpty()) {
+ if (Alert::prompt(_("Dissolve previous group?"),
+ bformat(_("If you assign this graphic to group '%2$s',\n"
+ "the previously assigned group '%1$s' will be dissolved,\n"
+ "because this graphic was its only member.\n"
+ "How do you want to proceed?"),
+ from_utf8(current_group_), qstring_to_ucs4(new_group)),
+ 0, 0,
+ bformat(_("Stick with group '%1$s'"),
+ from_utf8(current_group_)),
+ bformat(_("Assign to group '%1$s' anyway"),
+ qstring_to_ucs4(new_group))) == 0) {
+ groupCO->setCurrentIndex(
+ groupCO->findData(toqstr(current_group_), Qt::MatchExactly));
+ return;
+ }
+ } else {
+ if (Alert::prompt(_("Dissolve previous group?"),
+ bformat(_("If you sign off this graphic from group '%1$s',\n"
+ "the group will be dissolved,\n"
+ "because this graphic was its only member.\n"
+ "How do you want to proceed?"),
+ from_utf8(current_group_)),
+ 0, 0,
+ bformat(_("Stick with group '%1$s'"),
+ from_utf8(current_group_)),
+ bformat(_("Sign off from group '%1$s'"),
+ from_utf8(current_group_))) == 0) {
+ groupCO->setCurrentIndex(
+ groupCO->findData(toqstr(current_group_), Qt::MatchExactly));
+ return;
+ }
+ }
+ }
+ if (new_group.isEmpty()) {
+ changed();
+ return;
+ }
-void GuiGraphics::closeEvent(QCloseEvent * e)
-{
- slotClose();
- GuiDialog::closeEvent(e);
+ string grp = graphics::getGroupParams(buffer(), fromqstr(new_group));
+ if (grp.empty()) {
+ // group does not exist yet
+ changed();
+ return;
+ }
+
+ // filename might have been changed
+ QString current_filename = filename->text();
+
+ // group exists: load params into the dialog
+ groupCO->blockSignals(true);
+ InsetGraphics::string2params(grp, buffer(), params_);
+ paramsToDialog(params_);
+ groupCO->blockSignals(false);
+
+ // reset filename
+ filename->setText(current_filename);
+
+ changed();
}
-void GuiGraphics::on_browsePB_clicked()
+void GuiGraphics::on_newGroupPB_clicked()
{
- docstring const str = browse(qstring_to_ucs4(filename->text()));
- if (!str.empty()) {
- filename->setText(toqstr(str));
- embedCB->setCheckState(Qt::Unchecked);
- changed();
+ docstring newgroup;
+ if (!Alert::askForText(newgroup, _("Enter unique group name:")))
+ return;
+ if (newgroup.empty())
+ return;
+ if (groupCO->findData(toqstr(newgroup), Qt::MatchExactly) != -1) {
+ Alert::warning(_("Group already defined!"),
+ bformat(_("A graphics group with the name '%1$s' already exists."),
+ newgroup));
+ return;
}
+ groupCO->addItem(toqstr(newgroup), toqstr(newgroup));
+ groupCO->setCurrentIndex(
+ groupCO->findData(toqstr(newgroup), Qt::MatchExactly));
}
-void GuiGraphics::on_getPB_clicked()
+void GuiGraphics::changeBB()
{
- getBB();
+ bbChanged = true;
+ LYXERR(Debug::GRAPHICS, "[bb_Changed set to true]");
+ changed();
}
-void GuiGraphics::on_editPB_clicked()
+void GuiGraphics::on_browsePB_clicked()
{
- editGraphics();
+ QString const str = browse(filename->text());
+ if (!str.isEmpty()) {
+ filename->setText(str);
+ changed();
+ }
}
-void GuiGraphics::on_filename_textChanged(const QString & filename)
+void GuiGraphics::on_getPB_clicked()
{
- editPB->setDisabled(filename.isEmpty());
+ getBB();
}
if (scaleCB->isChecked())
return;
if (!Scale->isEnabled() && Scale->text() != "100")
- Scale->setText(QString("auto"));
+ Scale->setText(qt_(autostr));
setAutoTextCB(WidthCB, Width, widthUnit);
setAutoTextCB(HeightCB, Height, heightUnit);
Height->setEnabled(false);
heightUnit->setEnabled(false);
- aspectratio->setDisabled(true);
- aspectratio->setChecked(true);
-
rotateOrderCB->setEnabled((WidthCB->isChecked() ||
HeightCB->isChecked() ||
scaleCB->isChecked()) &&
(angle->text() != "0"));
setAutoText();
+ updateAspectRatioStatus();
}
Width->setFocus(Qt::OtherFocusReason);
bool const setHeight = HeightCB->isChecked();
- aspectratio->setEnabled(setWidth && setHeight);
- aspectratio->blockSignals(true);
- aspectratio->setChecked(!(setWidth && setHeight));
- aspectratio->blockSignals(false);
-
scaleCB->setEnabled(!setWidth && !setHeight);
//already will be unchecked, so don't need to do that
Scale->setEnabled((!setWidth && !setHeight) //=scaleCB->isEnabled()
(angle->text() != "0"));
setAutoText();
+ updateAspectRatioStatus();
}
Height->setFocus(Qt::OtherFocusReason);
bool const setWidth = WidthCB->isChecked();
- aspectratio->setEnabled(setWidth && setHeight);
- aspectratio->blockSignals(true);
- aspectratio->setChecked(!(setWidth && setHeight));
- aspectratio->blockSignals(false);
-
scaleCB->setEnabled(!setWidth && !setHeight);
//already unchecked
Scale->setEnabled((!setWidth && !setHeight) //=scaleCB->isEnabled()
(angle->text() != "0"));
setAutoText();
+ updateAspectRatioStatus();
+}
+
+
+void GuiGraphics::updateAspectRatioStatus()
+{
+ // keepaspectratio only makes sense if both a width _and_ a
+ // height are given, since its function is (see graphics manual):
+ // "If set to true then specifying both 'width' and 'height'
+ // (or 'totalheight') does not distort the figure but scales
+ // such that neither of the specified dimensions is _exceeded_."
+ aspectratio->setEnabled(
+ WidthCB->isChecked() && !Width->text().isEmpty()
+ && Width->text() != qt_(autostr)
+ && HeightCB->isChecked() && !Height->text().isEmpty()
+ && Height->text() != qt_(autostr)
+ );
+ if (!aspectratio->isEnabled())
+ aspectratio->setChecked(false);
+}
+
+
+void GuiGraphics::on_aspectratio_toggled(bool aspectratio)
+{
+ if (aspectratio) {
+ WidthCB->setText(qt_("Set max. &width:"));
+ HeightCB->setText(qt_("Set max. &height:"));
+ Width->setToolTip(qt_("Maximal width of image in output"));
+ Height->setToolTip(qt_("Maximal height of image in output"));
+ } else {
+ WidthCB->setText(qt_("Set &width:"));
+ HeightCB->setText(qt_("Set &height:"));
+ Width->setToolTip(qt_("Width of image in output"));
+ Height->setToolTip(qt_("Height of image in output"));
+ }
}
(filename != "0"));
}
-// returns the number of the string s in the vector v
-static int getItemNo(const vector<string> & v, string const & s)
-{
- vector<string>::const_iterator cit =
- find(v.begin(), v.end(), s);
- return (cit != v.end()) ? int(cit - v.begin()) : 0;
-}
-
-void GuiGraphics::updateContents()
+void GuiGraphics::paramsToDialog(InsetGraphicsParams const & igp)
{
- // clear and fill in the comboboxes
- vector<string> const bb_units = frontend::getBBUnits();
+ static char const * const bb_units[] = { "bp", "cm", "mm", "in" };
+ static char const * const bb_units_gui[] = { N_("bp"), N_("cm"), N_("mm"), N_("in[[unit of measure]]") };
+ size_t const bb_size = sizeof(bb_units) / sizeof(bb_units[0]);
+
lbXunit->clear();
lbYunit->clear();
rtXunit->clear();
rtYunit->clear();
- for (vector<string>::const_iterator it = bb_units.begin();
- it != bb_units.end(); ++it) {
- lbXunit->addItem(toqstr(*it));
- lbYunit->addItem(toqstr(*it));
- rtXunit->addItem(toqstr(*it));
- rtYunit->addItem(toqstr(*it));
+
+ for (size_t i = 0; i < bb_size; i++) {
+ lbXunit->addItem(qt_(bb_units_gui[i]),
+ toqstr(bb_units[i]));
+ lbYunit->addItem(qt_(bb_units_gui[i]),
+ toqstr(bb_units[i]));
+ rtXunit->addItem(qt_(bb_units_gui[i]),
+ toqstr(bb_units[i]));
+ rtYunit->addItem(qt_(bb_units_gui[i]),
+ toqstr(bb_units[i]));
}
-
- InsetGraphicsParams & igp = params_;
-
+
// set the right default unit
- Length::UNIT unitDefault = Length::CM;
- switch (lyxrc.default_papersize) {
- case PAPER_USLETTER:
- case PAPER_USLEGAL:
- case PAPER_USEXECUTIVE:
- unitDefault = Length::IN;
- break;
- default:
- break;
- }
+ Length::UNIT const defaultUnit = Length::defaultUnit();
+ //lyxerr << bufferFilePath();
string const name =
- igp.filename.outputFilename(bufferFilepath());
+ igp.filename.outputFileName(fromqstr(bufferFilePath()));
filename->setText(toqstr(name));
- embedCB->setCheckState(igp.filename.embedded() ? Qt::Checked : Qt::Unchecked);
// set the bounding box values
- if (igp.bb.empty()) {
- string const bb = readBB(igp.filename.absFilename());
+ if (igp.bbox.empty()) {
+ string const bb = readBoundingBox(igp.filename.absFileName());
// the values from the file always have the bigpoint-unit bp
- lbX->setText(toqstr(token(bb, ' ', 0)));
- lbY->setText(toqstr(token(bb, ' ', 1)));
- rtX->setText(toqstr(token(bb, ' ', 2)));
- rtY->setText(toqstr(token(bb, ' ', 3)));
+ doubleToWidget(lbX, token(bb, ' ', 0));
+ doubleToWidget(lbY, token(bb, ' ', 1));
+ doubleToWidget(rtX, token(bb, ' ', 2));
+ doubleToWidget(rtY, token(bb, ' ', 3));
lbXunit->setCurrentIndex(0);
lbYunit->setCurrentIndex(0);
rtXunit->setCurrentIndex(0);
bbChanged = false;
} else {
// get the values from the inset
- Length anyLength;
- string const xl = token(igp.bb, ' ', 0);
- string const yl = token(igp.bb, ' ', 1);
- string const xr = token(igp.bb, ' ', 2);
- string const yr = token(igp.bb, ' ', 3);
- if (isValidLength(xl, &anyLength)) {
- lbX->setText(toqstr(convert<string>(anyLength.value())));
- string const unit(unit_name[anyLength.unit()]);
- lbXunit->setCurrentIndex(getItemNo(bb_units, unit));
- } else {
- lbX->setText(toqstr(xl));
- }
- if (isValidLength(yl, &anyLength)) {
- lbY->setText(toqstr(convert<string>(anyLength.value())));
- string const unit(unit_name[anyLength.unit()]);
- lbYunit->setCurrentIndex(getItemNo(bb_units, unit));
- } else {
- lbY->setText(toqstr(xl));
- }
- if (isValidLength(xr, &anyLength)) {
- rtX->setText(toqstr(convert<string>(anyLength.value())));
- string const unit(unit_name[anyLength.unit()]);
- rtXunit->setCurrentIndex(getItemNo(bb_units, unit));
- } else {
- rtX->setText(toqstr(xl));
- }
- if (isValidLength(yr, &anyLength)) {
- rtY->setText(toqstr(convert<string>(anyLength.value())));
- string const unit(unit_name[anyLength.unit()]);
- rtYunit->setCurrentIndex(getItemNo(bb_units, unit));
- } else {
- rtY->setText(toqstr(xl));
- }
+ doubleToWidget(lbX, igp.bbox.xl.value());
+ string unit = unit_name[igp.bbox.xl.unit()];
+ lbXunit->setCurrentIndex(lbXunit->findData(toqstr(unit)));
+ doubleToWidget(lbY, igp.bbox.yb.value());
+ unit = unit_name[igp.bbox.yb.unit()];
+ lbYunit->setCurrentIndex(lbYunit->findData(toqstr(unit)));
+ doubleToWidget(rtX, igp.bbox.xr.value());
+ unit = unit_name[igp.bbox.xr.unit()];
+ rtXunit->setCurrentIndex(rtXunit->findData(toqstr(unit)));
+ doubleToWidget(rtY, igp.bbox.yt.value());
+ unit = unit_name[igp.bbox.yt.unit()];
+ rtYunit->setCurrentIndex(rtYunit->findData(toqstr(unit)));
bbChanged = true;
}
// Update the draft and clip mode
draftCB->setChecked(igp.draft);
clip->setChecked(igp.clip);
- unzipCB->setChecked(igp.noUnzip);
-
- // Update the subcaption check button and input field
- subfigure->setChecked(igp.subcaption);
- subcaption->setText(toqstr(igp.subcaptionText));
-
- int item = 0;
- switch (igp.display) {
- case graphics::DefaultDisplay: item = 0; break;
- case graphics::MonochromeDisplay: item = 1; break;
- case graphics::GrayscaleDisplay: item = 2; break;
- case graphics::ColorDisplay: item = 3; break;
- case graphics::NoDisplay: item = 0; break;
- }
- showCB->setCurrentIndex(item);
+ displayGB->setChecked(igp.display);
displayscale->setText(toqstr(convert<string>(igp.lyxscale)));
- displayGB->setChecked(igp.display != graphics::NoDisplay);
// the output section (width/height)
- Scale->setText(toqstr(igp.scale));
+ doubleToWidget(Scale, igp.scale);
//igp.scale defaults to 100, so we treat it as empty
bool const scaleChecked = !igp.scale.empty() && igp.scale != "100";
scaleCB->blockSignals(true);
scaleCB->setChecked(scaleChecked);
scaleCB->blockSignals(false);
Scale->setEnabled(scaleChecked);
+ displayGB->setEnabled(lyxrc.display_graphics);
+
+ set<string> grp;
+ graphics::getGraphicsGroups(buffer(), grp);
+ set<string>::const_iterator it = grp.begin();
+ set<string>::const_iterator end = grp.end();
+ groupCO->blockSignals(true);
+ groupCO->clear();
+ for (; it != end; ++it)
+ groupCO->addItem(toqstr(*it), toqstr(*it));
+ groupCO->insertItem(0, qt_("None"), QString());
+ if (igp.groupId.empty())
+ groupCO->setCurrentIndex(0);
+ else
+ groupCO->setCurrentIndex(
+ groupCO->findData(toqstr(igp.groupId), Qt::MatchExactly));
+ groupCO->blockSignals(false);
+
+ if (igp.width.value() == 0)
+ lengthToWidgets(Width, widthUnit, _(autostr), defaultUnit);
+ else
+ lengthToWidgets(Width, widthUnit, igp.width, defaultUnit);
- lengthAutoToWidgets(Width, widthUnit, igp.width,
- unitDefault);
bool const widthChecked = !Width->text().isEmpty() &&
- Width->text() != "auto";
+ Width->text() != qt_(autostr);
WidthCB->blockSignals(true);
WidthCB->setChecked(widthChecked);
WidthCB->blockSignals(false);
Width->setEnabled(widthChecked);
widthUnit->setEnabled(widthChecked);
- lengthAutoToWidgets(Height, heightUnit, igp.height,
- unitDefault);
+ if (igp.height.value() == 0)
+ lengthToWidgets(Height, heightUnit, _(autostr), defaultUnit);
+ else
+ lengthToWidgets(Height, heightUnit, igp.height, defaultUnit);
+
bool const heightChecked = !Height->text().isEmpty()
- && Height->text() != "auto";
+ && Height->text() != qt_(autostr);
HeightCB->blockSignals(true);
HeightCB->setChecked(heightChecked);
HeightCB->blockSignals(false);
scaleCB->setEnabled(!widthChecked && !heightChecked);
WidthCB->setEnabled(!scaleChecked);
HeightCB->setEnabled(!scaleChecked);
- aspectratio->setEnabled(widthChecked && heightChecked);
setAutoText();
+ updateAspectRatioStatus();
- angle->setText(toqstr(igp.rotateAngle));
+ doubleToWidget(angle, igp.rotateAngle);
rotateOrderCB->setChecked(igp.scaleBeforeRotation);
rotateOrderCB->setEnabled( (widthChecked || heightChecked || scaleChecked)
origin->clear();
- vector<RotationOriginPair> origindata = getRotationOriginData();
- vector<docstring> const origin_lang = getFirst(origindata);
- origin_ltx = getSecond(origindata);
-
- for (vector<docstring>::const_iterator it = origin_lang.begin();
- it != origin_lang.end(); ++it)
- origin->addItem(toqstr(*it));
+ for (size_t i = 0; i < rorigin_size; i++) {
+ origin->addItem(qt_(rorigin_gui_strs[i]),
+ toqstr(rorigin_lyx_strs[i]));
+ }
if (!igp.rotateOrigin.empty())
- origin->setCurrentIndex(
- getItemNo(origin_ltx, igp.rotateOrigin));
+ origin->setCurrentIndex(origin->findData(toqstr(igp.rotateOrigin)));
else
origin->setCurrentIndex(0);
- // disable edit button when no filename is present
- editPB->setDisabled(filename->text().isEmpty());
-
- //// latex section
+ // latex section
latexoptions->setText(toqstr(igp.special));
+ // cf bug #3852
+ filename->setFocus();
}
{
InsetGraphicsParams & igp = params_;
- igp.filename.set(internal_path(fromqstr(filename->text())),
- bufferFilepath());
- igp.filename.setEmbed(embedCB->checkState() == Qt::Checked);
+ igp.filename.set(fromqstr(filename->text()), fromqstr(bufferFilePath()));
// the bb section
- igp.bb.erase();
+ igp.bbox = graphics::BoundingBox();
if (bbChanged) {
- string bb;
- string lbXs = fromqstr(lbX->text());
- string lbYs = fromqstr(lbY->text());
- string rtXs = fromqstr(rtX->text());
- string rtYs = fromqstr(rtY->text());
+ string lbXs = widgetToDoubleStr(lbX);
+ string lbYs = widgetToDoubleStr(lbY);
+ string rtXs = widgetToDoubleStr(rtX);
+ string rtYs = widgetToDoubleStr(rtY);
int bb_sum =
convert<int>(lbXs) + convert<int>(lbYs) +
convert<int>(rtXs) + convert<int>(rtXs);
if (bb_sum) {
if (lbXs.empty())
- bb = "0 ";
- else
- bb = lbXs + fromqstr(lbXunit->currentText()) + ' ';
+ lbXs = "0";
+ igp.bbox.xl = Length(lbXs + fromqstr(lbXunit->currentText()));
if (lbYs.empty())
- bb += "0 ";
- else
- bb += (lbYs + fromqstr(lbYunit->currentText()) + ' ');
+ lbYs = "0";
+ igp.bbox.yb = Length(lbYs + fromqstr(lbYunit->currentText()));
if (rtXs.empty())
- bb += "0 ";
- else
- bb += (rtXs + fromqstr(rtXunit->currentText()) + ' ');
+ rtXs = "0";
+ igp.bbox.xr = Length(rtXs + fromqstr(rtXunit->currentText()));
if (rtYs.empty())
- bb += '0';
- else
- bb += (rtYs + fromqstr(rtYunit->currentText()));
- igp.bb = bb;
+ rtYs = "0";
+ igp.bbox.yt = Length(rtYs + fromqstr(rtYunit->currentText()));
}
}
igp.draft = draftCB->isChecked();
igp.clip = clip->isChecked();
- igp.subcaption = subfigure->isChecked();
- igp.subcaptionText = fromqstr(subcaption->text());
-
- switch (showCB->currentIndex()) {
- case 0: igp.display = graphics::DefaultDisplay; break;
- case 1: igp.display = graphics::MonochromeDisplay; break;
- case 2: igp.display = graphics::GrayscaleDisplay; break;
- case 3: igp.display = graphics::ColorDisplay; break;
- default:;
- }
-
- if (!displayGB->isChecked())
- igp.display = graphics::NoDisplay;
+ igp.display = displayGB->isChecked();
//the graphics section
if (scaleCB->isChecked() && !Scale->text().isEmpty()) {
- igp.scale = fromqstr(Scale->text());
+ igp.scale = widgetToDoubleStr(Scale);
igp.width = Length("0pt");
igp.height = Length("0pt");
igp.keepAspectRatio = false;
igp.height = HeightCB->isChecked() ?
Length(widgetsToLength(Height, heightUnit)) :
Length("0pt");
- igp.keepAspectRatio = aspectratio->isEnabled() &&
- aspectratio->isChecked() &&
- igp.width.value() > 0 && igp.height.value() > 0;
+ igp.keepAspectRatio = aspectratio->isChecked();
}
- igp.noUnzip = unzipCB->isChecked();
igp.lyxscale = displayscale->text().toInt();
- igp.rotateAngle = fromqstr(angle->text());
+ igp.rotateAngle = widgetToDoubleStr(angle);
- double rotAngle = convert<double>(igp.rotateAngle);
- if (std::abs(rotAngle) > 360.0) {
+ double rotAngle = widgetToDouble(angle);
+ if (abs(rotAngle) > 360.0) {
rotAngle -= 360.0 * floor(rotAngle / 360.0);
igp.rotateAngle = convert<string>(rotAngle);
}
// save the latex name for the origin. If it is the default
// then origin_ltx returns ""
- igp.rotateOrigin = origin_ltx[origin->currentIndex()];
+ igp.rotateOrigin =
+ fromqstr(origin->itemData(origin->currentIndex()).toString());
igp.scaleBeforeRotation = rotateOrderCB->isChecked();
// more latex options
igp.special = fromqstr(latexoptions->text());
+
+ igp.groupId = fromqstr(groupCO->itemData(
+ groupCO->currentIndex()).toString());
+ current_group_ = igp.groupId;
}
void GuiGraphics::getBB()
{
string const fn = fromqstr(filename->text());
- if (!fn.empty()) {
- string const bb = readBB(fn);
- if (!bb.empty()) {
- lbX->setText(toqstr(token(bb, ' ', 0)));
- lbY->setText(toqstr(token(bb, ' ', 1)));
- rtX->setText(toqstr(token(bb, ' ', 2)));
- rtY->setText(toqstr(token(bb, ' ', 3)));
- // the default units for the bb values when reading
- // it from the file
- lbXunit->setCurrentIndex(0);
- lbYunit->setCurrentIndex(0);
- rtXunit->setCurrentIndex(0);
- rtYunit->setCurrentIndex(0);
- }
- bbChanged = false;
- }
+ if (fn.empty())
+ return;
+ string const bb = readBoundingBox(fn);
+ bbChanged = false;
+ if (bb.empty())
+ return;
+ doubleToWidget(lbX, token(bb, ' ', 0));
+ doubleToWidget(lbY, token(bb, ' ', 1));
+ doubleToWidget(rtX, token(bb, ' ', 2));
+ doubleToWidget(rtY, token(bb, ' ', 3));
+ // the default units for the bb values when reading
+ // it from the file
+ lbXunit->setCurrentIndex(0);
+ lbYunit->setCurrentIndex(0);
+ rtXunit->setCurrentIndex(0);
+ rtYunit->setCurrentIndex(0);
}
bool GuiGraphics::initialiseParams(string const & data)
{
- InsetGraphicsMailer::string2params(data, buffer(), params_);
+ InsetGraphics::string2params(data, buffer(), params_);
+ paramsToDialog(params_);
+ current_group_ = params_.groupId;
return true;
}
void GuiGraphics::dispatchParams()
{
InsetGraphicsParams tmp_params(params_);
- string const lfun =
- InsetGraphicsMailer::params2string(tmp_params, buffer());
+ string const lfun = InsetGraphics::params2string(tmp_params, buffer());
dispatch(FuncRequest(getLfun(), lfun));
}
-docstring const GuiGraphics::browse(docstring const & in_name) const
+QString GuiGraphics::browse(QString const & in_name) const
{
- docstring const title = _("Select graphics file");
+ QString const title = qt_("Select graphics file");
// Does user clipart directory exist?
- string clipdir = addName(package().user_support().absFilename(), "clipart");
+ string clipdir = addName(package().user_support().absFileName(), "clipart");
FileName clip(clipdir);
// bail out to system clipart directory
- if (!(clip.exists() && clip.isDirectory()))
- clipdir = addName(package().system_support().absFilename(), "clipart");
+ if (!clip.isDirectory())
+ clipdir = addName(package().system_support().absFileName(), "clipart");
- return browseRelFile(in_name, from_utf8(bufferFilepath()),
- title, FileFilterList(), false,
- _("Clipart|#C#c"), from_utf8(clipdir),
- _("Documents|#o#O"), from_utf8(lyxrc.document_path));
+ return browseRelToParent(in_name, bufferFilePath(),
+ title, fileFilters(QString()), false,
+ qt_("Clipart|#C#c"), toqstr(clipdir),
+ qt_("Documents|#o#O"), toqstr(lyxrc.document_path));
}
-string const GuiGraphics::readBB(string const & file)
+string GuiGraphics::readBoundingBox(string const & file)
{
- FileName const abs_file = makeAbsPath(file, bufferFilepath());
+ FileName const abs_file = support::makeAbsPath(file, fromqstr(bufferFilePath()));
// try to get it from the file, if possible. Zipped files are
// unzipped in the readBB_from_PSFile-Function
- string const bb = readBB_from_PSFile(abs_file);
+ string const bb = graphics::readBB_from_PSFile(abs_file);
if (!bb.empty())
return bb;
graphics::Image const * image = gc.item(abs_file)->image();
if (image) {
- width = image->getWidth();
- height = image->getHeight();
+ width = image->width();
+ height = image->height();
}
}
}
-bool GuiGraphics::isFilenameValid(string const & fname) const
+bool GuiGraphics::isFileNameValid(string const & fname) const
{
// It may be that the filename is relative.
- return makeAbsPath(fname, bufferFilepath()).isFileReadable();
-}
-
-
-void GuiGraphics::editGraphics()
-{
- applyView();
- string const lfun =
- InsetGraphicsMailer::params2string(params_, buffer());
- dispatch(FuncRequest(LFUN_GRAPHICS_EDIT, lfun));
-}
-
-
-namespace {
-
-char const * const bb_units[] = { "bp", "cm", "mm", "in" };
-size_t const bb_size = sizeof(bb_units) / sizeof(char *);
-
-// These are the strings that are stored in the LyX file and which
-// correspond to the LaTeX identifiers shown in the comments at the
-// end of each line.
-char const * const rorigin_lyx_strs[] = {
- // the LaTeX default is leftBaseline
- "",
- "leftTop", "leftBottom", "leftBaseline", // lt lb lB
- "center", "centerTop", "centerBottom", "centerBaseline", // c ct cb cB
- "rightTop", "rightBottom", "rightBaseline" }; // rt rb rB
-
-// These are the strings, corresponding to the above, that the GUI should
-// use. Note that they can/should be translated.
-char const * const rorigin_gui_strs[] = {
- N_("Default"),
- N_("Top left"), N_("Bottom left"), N_("Baseline left"),
- N_("Center"), N_("Top center"), N_("Bottom center"), N_("Baseline center"),
- N_("Top right"), N_("Bottom right"), N_("Baseline right") };
-
-size_t const rorigin_size = sizeof(rorigin_lyx_strs) / sizeof(char *);
-
-} // namespace anon
-
-
-vector<string> const getBBUnits()
-{
- return vector<string>(bb_units, bb_units + bb_size);
-}
-
-
-vector<RotationOriginPair> getRotationOriginData()
-{
- static vector<RotationOriginPair> data;
- if (!data.empty())
- return data;
-
- data.resize(rorigin_size);
- for (size_type i = 0; i < rorigin_size; ++i) {
- data[i] = make_pair(_(rorigin_gui_strs[i]),
- rorigin_lyx_strs[i]);
- }
-
- return data;
+ return support::makeAbsPath(fname, fromqstr(bufferFilePath())).isReadableFile();
}
-Dialog * createGuiGraphics(LyXView & lv) { return new GuiGraphics(lv); }
+Dialog * createGuiGraphics(GuiView & lv) { return new GuiGraphics(lv); }
} // namespace frontend
} // namespace lyx
-#include "GuiGraphics_moc.cpp"
+#include "moc_GuiGraphics.cpp"