* This file is part of LyX, the document processor.
* Licence details can be found in the file COPYING.
*
+ * \author Angus Leeming
* \author John Levon
* \author Edwin Leuven
- * \author Herbert Voß
+ * \author Herbert Voß
* \author Richard Heck
*
* Full author contact details are available in file CREDITS.
#include <config.h>
#include "GuiGraphics.h"
+#include "frontends/alert.h"
+#include "qt_helpers.h"
+#include "Validator.h"
-#include "debug.h"
+#include "Buffer.h"
+#include "FuncRequest.h"
#include "LengthCombo.h"
-#include "lengthcommon.h"
+#include "Length.h"
#include "LyXRC.h"
-#include "Qt2BC.h"
-#include "qt_helpers.h"
-#include "Validator.h"
-#include "controllers/frontend_helpers.h"
+#include "graphics/epstools.h"
+#include "graphics/GraphicsCache.h"
+#include "graphics/GraphicsCacheItem.h"
+#include "graphics/GraphicsImage.h"
-#include "insets/InsetGraphicsParams.h"
+#include "insets/InsetGraphics.h"
#include "support/convert.h"
+#include "support/debug.h"
+#include "support/filetools.h"
+#include "support/gettext.h"
#include "support/lstrings.h"
-#include "support/lyxlib.h"
#include "support/os.h"
-
-#include <cmath>
-
-#include "insets/InsetGraphicsParams.h"
+#include "support/Package.h"
+#include "support/types.h"
#include <QCheckBox>
-#include <QCloseEvent>
#include <QLabel>
#include <QLineEdit>
#include <QPushButton>
#include <QValidator>
+#include <cmath>
+#include <utility>
+
+using namespace std;
+using namespace lyx::support;
-using lyx::support::float_equal;
-using lyx::support::token;
+namespace {
-using lyx::support::os::internal_path;
+// These are the strings that are stored in the LyX file and which
+// correspond to the LaTeX identifiers shown in the comments at the
+// end of each line.
+char const * const rorigin_lyx_strs[] = {
+ // the LaTeX default is leftBaseline
+ "",
+ "leftTop", "leftBottom", "leftBaseline", // lt lb lB
+ "center", "centerTop", "centerBottom", "centerBaseline", // c ct cb cB
+ "rightTop", "rightBottom", "rightBaseline" }; // rt rb rB
-#ifndef CXX_GLOBAL_CSTD
-using std::floor;
-#endif
+// These are the strings, corresponding to the above, that the GUI should
+// use. Note that they can/should be translated.
+char const * const rorigin_gui_strs[] = {
+ N_("Default"),
+ N_("Top left"), N_("Bottom left"), N_("Baseline left"),
+ N_("Center"), N_("Top center"), N_("Bottom center"), N_("Baseline center"),
+ N_("Top right"), N_("Bottom right"), N_("Baseline right") };
-using std::vector;
-using std::string;
+size_t const rorigin_size = sizeof(rorigin_lyx_strs) / sizeof(char *);
+
+static string const autostr = N_("automatically");
+
+} // namespace anon
namespace lyx {
namespace frontend {
+//FIXME setAutoTextCB should really take an argument, as indicated, that
+//determines what text is to be written for "auto". But making
+//that work involves more extensive revisions than we now want
+//to make, since "auto" also appears in paramsToDialog().
+//The right way to do this, I think, would be to define a class
+//checkedLengthSet (and a partnering labeledLengthSete) that encapsulated
+//the checkbox, line edit, and length combo together, and then made e.g.
+//lengthToWidgets, widgetsToLength, etc, all public methods of that class.
+//Perhaps even the validator could be exposed through it.
+/**
+ * sets a checkbox-line edit-length combo group, using "text" if the
+ * checkbox is unchecked and clearing the line edit if it previously
+ * said "text".
+*/
+static void setAutoTextCB(QCheckBox * checkBox, QLineEdit * lineEdit,
+ LengthCombo * lengthCombo/*, string text = "auto"*/)
+{
+ if (!checkBox->isChecked())
+ lengthToWidgets(lineEdit, lengthCombo,
+ _(autostr), lengthCombo->currentLengthItem());
+ else if (lineEdit->text() == qt_(autostr))
+ lengthToWidgets(lineEdit, lengthCombo, string(),
+ lengthCombo->currentLengthItem());
+}
+
-GuiGraphicsDialog::GuiGraphicsDialog(GuiGraphics * form)
- : form_(form)
+GuiGraphics::GuiGraphics(GuiView & lv)
+ : GuiDialog(lv, "graphics", qt_("Graphics")), bbChanged(false)
{
setupUi(this);
+
//main buttons
- connect(okPB, SIGNAL(clicked()),
- form, SLOT(slotOK()));
- connect(applyPB, SIGNAL(clicked()),
- form, SLOT(slotApply()));
- connect(closePB, SIGNAL(clicked()),
- form, SLOT(slotClose()));
- connect(restorePB, SIGNAL(clicked()),
- form, SLOT(slotRestore()));
+ connect(okPB, SIGNAL(clicked()), this, SLOT(slotOK()));
+ connect(applyPB, SIGNAL(clicked()), this, SLOT(slotApply()));
+ connect(closePB, SIGNAL(clicked()), this, SLOT(slotClose()));
+ connect(restorePB, SIGNAL(clicked()), this, SLOT(slotRestore()));
//graphics pane
connect(filename, SIGNAL(textChanged(const QString &)),
this, SLOT(change_adaptor()));
- connect(WidthCB, SIGNAL( clicked()),
+ connect(WidthCB, SIGNAL(clicked()),
this, SLOT(change_adaptor()));
- connect(HeightCB, SIGNAL( clicked()),
+ connect(HeightCB, SIGNAL(clicked()),
this, SLOT(change_adaptor()));
+ connect(Width, SIGNAL(textChanged(const QString &)),
+ this, SLOT(updateAspectRatioStatus()));
connect(Width, SIGNAL(textChanged(const QString &)),
this, SLOT(change_adaptor()));
+ connect(Height, SIGNAL(textChanged(const QString &)),
+ this, SLOT(updateAspectRatioStatus()));
connect(Height, SIGNAL(textChanged(const QString &)),
this, SLOT(change_adaptor()));
connect(heightUnit, SIGNAL(selectionChanged(lyx::Length::UNIT)),
filename->setValidator(new PathValidator(true, filename));
setFocusProxy(filename);
- QDoubleValidator * scaleValidator = new DoubleAutoValidator(Scale);
+ QDoubleValidator * scaleValidator =
+ new DoubleAutoValidator(Scale, qt_(autostr));
scaleValidator->setBottom(0);
scaleValidator->setDecimals(256); //I guess that will do
Scale->setValidator(scaleValidator);
- Height->setValidator(unsignedLengthAutoValidator(Height));
- Width->setValidator(unsignedLengthAutoValidator(Width));
+ Height->setValidator(unsignedLengthAutoValidator(Height, qt_(autostr)));
+ Width->setValidator(unsignedLengthAutoValidator(Width, qt_(autostr)));
angle->setValidator(new QDoubleValidator(-360, 360, 2, angle));
//clipping pane
connect(clip, SIGNAL(stateChanged(int)),
this, SLOT(change_adaptor()));
connect(lbY, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(lbYunit, SIGNAL(activated(int)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(rtY, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(rtYunit, SIGNAL(activated(int)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(lbX, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(lbXunit, SIGNAL(activated(int)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(rtX, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(rtXunit, SIGNAL(activated(int)),
- this, SLOT(change_bb()));
+ this, SLOT(changeBB()));
connect(getPB, SIGNAL(clicked()),
this, SLOT(change_adaptor()));
this, SLOT(change_adaptor()));
connect(draftCB, SIGNAL(stateChanged(int)),
this, SLOT(change_adaptor()));
- connect(unzipCB, SIGNAL(stateChanged(int)),
- this, SLOT(change_adaptor()));
// FIXME: we should connect to clicked() when we move to Qt 4.2 because
// the toggled(bool) signal is also trigged when we update the widgets
// (rgh-4/07) this isn't as much or a problem as it was, because we're now
// setChecked(). Note, too, that clicked() would get called whenever it
// is clicked, even right clicked (I think), not just whenever it is
// toggled.
- connect(subfigure, SIGNAL(toggled(bool)),
- this, SLOT(change_adaptor()));
- connect(subcaption, SIGNAL(textChanged(const QString&)),
- this, SLOT(change_adaptor()));
- connect(displayGB, SIGNAL(toggled(bool)),
- this, SLOT(change_adaptor()));
- connect(showCB, SIGNAL(currentIndexChanged(int)),
- this, SLOT(change_adaptor()));
+ connect(displayGB, SIGNAL(toggled(bool)), this, SLOT(change_adaptor()));
connect(displayscale, SIGNAL(textChanged(const QString&)),
this, SLOT(change_adaptor()));
+ connect(groupCO, SIGNAL(currentIndexChanged(int)),
+ this, SLOT(changeGroup(int)));
+
displayscale->setValidator(new QIntValidator(displayscale));
-}
+ bc().setPolicy(ButtonPolicy::NoRepeatedApplyReadOnlyPolicy);
+ bc().setOK(okPB);
+ bc().setApply(applyPB);
+ bc().setRestore(restorePB);
+ bc().setCancel(closePB);
+
+ bc().addReadOnly(latexoptions);
+ bc().addReadOnly(filenameL);
+ bc().addReadOnly(filename);
+ bc().addReadOnly(browsePB);
+ bc().addReadOnly(bbFrame);
+ bc().addReadOnly(draftCB);
+ bc().addReadOnly(clip);
+ bc().addReadOnly(displayGB);
+ bc().addReadOnly(sizeGB);
+ bc().addReadOnly(rotationGB);
+ bc().addReadOnly(latexoptions);
+ bc().addReadOnly(getPB);
+ bc().addReadOnly(rotateOrderCB);
-void GuiGraphicsDialog::show()
-{
- QDialog::show();
+ // initialize the length validator
+ bc().addCheckedLineEdit(Scale, scaleCB);
+ bc().addCheckedLineEdit(Width, WidthCB);
+ bc().addCheckedLineEdit(Height, HeightCB);
+ bc().addCheckedLineEdit(displayscale, scaleLA);
+ bc().addCheckedLineEdit(angle, angleL);
+ bc().addCheckedLineEdit(lbX, xL);
+ bc().addCheckedLineEdit(lbY, yL);
+ bc().addCheckedLineEdit(rtX, xL_2);
+ bc().addCheckedLineEdit(rtY, yL_2);
+ bc().addCheckedLineEdit(filename, filenameL);
}
-void GuiGraphicsDialog::change_adaptor()
+void GuiGraphics::change_adaptor()
{
- form_->changed();
+ changed();
}
-void GuiGraphicsDialog::change_bb()
+void GuiGraphics::changeGroup(int /* index */)
{
- form_->controller().bbChanged = true;
- LYXERR(Debug::GRAPHICS)
- << "[controller().bb_Changed set to true]\n";
- form_->changed();
-}
+ QString const new_group = groupCO->itemData(
+ groupCO->currentIndex()).toString();
+
+ // check if the old group consisted only of this member
+ if (current_group_ != fromqstr(new_group)
+ && graphics::countGroupMembers(buffer(), current_group_) == 1) {
+ if (!new_group.isEmpty()) {
+ if (Alert::prompt(_("Dissolve previous group?"),
+ bformat(_("If you assign this graphic to group '%2$s',\n"
+ "the previously assigned group '%1$s' will be dissolved,\n"
+ "because this graphic was its only member.\n"
+ "How do you want to proceed?"),
+ from_utf8(current_group_), qstring_to_ucs4(new_group)),
+ 0, 0,
+ bformat(_("Stick with group '%1$s'"),
+ from_utf8(current_group_)),
+ bformat(_("Assign to group '%1$s' anyway"),
+ qstring_to_ucs4(new_group))) == 0) {
+ groupCO->setCurrentIndex(
+ groupCO->findData(toqstr(current_group_), Qt::MatchExactly));
+ return;
+ }
+ } else {
+ if (Alert::prompt(_("Dissolve previous group?"),
+ bformat(_("If you sign off this graphic from group '%1$s',\n"
+ "the group will be dissolved,\n"
+ "because this graphic was its only member.\n"
+ "How do you want to proceed?"),
+ from_utf8(current_group_)),
+ 0, 0,
+ bformat(_("Stick with group '%1$s'"),
+ from_utf8(current_group_)),
+ bformat(_("Sign off from group '%1$s'"),
+ from_utf8(current_group_))) == 0) {
+ groupCO->setCurrentIndex(
+ groupCO->findData(toqstr(current_group_), Qt::MatchExactly));
+ return;
+ }
+ }
+ }
+ if (new_group.isEmpty()) {
+ changed();
+ return;
+ }
-void GuiGraphicsDialog::closeEvent(QCloseEvent * e)
-{
- form_->slotWMHide();
- e->accept();
+ string grp = graphics::getGroupParams(buffer(), fromqstr(new_group));
+ if (grp.empty()) {
+ // group does not exist yet
+ changed();
+ return;
+ }
+
+ // filename might have been changed
+ QString current_filename = filename->text();
+
+ // group exists: load params into the dialog
+ groupCO->blockSignals(true);
+ InsetGraphics::string2params(grp, buffer(), params_);
+ paramsToDialog(params_);
+ groupCO->blockSignals(false);
+
+ // reset filename
+ filename->setText(current_filename);
+
+ changed();
}
-void GuiGraphicsDialog::on_browsePB_clicked()
+void GuiGraphics::on_newGroupPB_clicked()
{
- docstring const str =
- form_->controller().browse(qstring_to_ucs4(filename->text()));
- if(!str.empty()){
- filename->setText(toqstr(str));
- form_->changed();
+ docstring newgroup;
+ if (!Alert::askForText(newgroup, _("Enter unique group name:")))
+ return;
+ if (newgroup.empty())
+ return;
+ if (groupCO->findData(toqstr(newgroup), Qt::MatchExactly) != -1) {
+ Alert::warning(_("Group already defined!"),
+ bformat(_("A graphics group with the name '%1$s' already exists."),
+ newgroup));
+ return;
}
+ groupCO->addItem(toqstr(newgroup), toqstr(newgroup));
+ groupCO->setCurrentIndex(
+ groupCO->findData(toqstr(newgroup), Qt::MatchExactly));
}
-void GuiGraphicsDialog::on_getPB_clicked()
+void GuiGraphics::changeBB()
{
- form_->getBB();
+ bbChanged = true;
+ LYXERR(Debug::GRAPHICS, "[bb_Changed set to true]");
+ changed();
}
-void GuiGraphicsDialog::on_editPB_clicked()
+void GuiGraphics::on_browsePB_clicked()
{
- form_->controller().editGraphics();
+ QString const str = browse(filename->text());
+ if (!str.isEmpty()) {
+ filename->setText(str);
+ changed();
+ }
}
-void GuiGraphicsDialog::on_filename_textChanged(const QString & filename)
+void GuiGraphics::on_getPB_clicked()
{
- editPB->setDisabled(filename.isEmpty());
+ getBB();
}
-void GuiGraphicsDialog::setAutoText()
+void GuiGraphics::setAutoText()
{
- if (scaleCB->isChecked()) return;
+ if (scaleCB->isChecked())
+ return;
if (!Scale->isEnabled() && Scale->text() != "100")
- Scale->setText(QString("auto"));
+ Scale->setText(qt_(autostr));
setAutoTextCB(WidthCB, Width, widthUnit);
setAutoTextCB(HeightCB, Height, heightUnit);
}
-void GuiGraphicsDialog::on_scaleCB_toggled(bool setScale)
+void GuiGraphics::on_scaleCB_toggled(bool setScale)
{
Scale->setEnabled(setScale);
if (setScale) {
Height->setEnabled(false);
heightUnit->setEnabled(false);
- aspectratio->setDisabled(true);
- aspectratio->setChecked(true);
-
rotateOrderCB->setEnabled((WidthCB->isChecked() ||
HeightCB->isChecked() ||
scaleCB->isChecked()) &&
(angle->text() != "0"));
setAutoText();
+ updateAspectRatioStatus();
}
-void GuiGraphicsDialog::on_WidthCB_toggled(bool setWidth)
+
+void GuiGraphics::on_WidthCB_toggled(bool setWidth)
{
Width->setEnabled(setWidth);
widthUnit->setEnabled(setWidth);
Width->setFocus(Qt::OtherFocusReason);
bool const setHeight = HeightCB->isChecked();
- aspectratio->setEnabled(setWidth && setHeight);
- aspectratio->blockSignals(true);
- aspectratio->setChecked(!(setWidth && setHeight));
- aspectratio->blockSignals(false);
-
scaleCB->setEnabled(!setWidth && !setHeight);
//already will be unchecked, so don't need to do that
Scale->setEnabled((!setWidth && !setHeight) //=scaleCB->isEnabled()
(angle->text() != "0"));
setAutoText();
+ updateAspectRatioStatus();
}
-void GuiGraphicsDialog::on_HeightCB_toggled(bool setHeight)
+void GuiGraphics::on_HeightCB_toggled(bool setHeight)
{
Height->setEnabled(setHeight);
heightUnit->setEnabled(setHeight);
Height->setFocus(Qt::OtherFocusReason);
bool const setWidth = WidthCB->isChecked();
- aspectratio->setEnabled(setWidth && setHeight);
- aspectratio->blockSignals(true);
- aspectratio->setChecked(!(setWidth && setHeight));
- aspectratio->blockSignals(false);
-
scaleCB->setEnabled(!setWidth && !setHeight);
//already unchecked
Scale->setEnabled((!setWidth && !setHeight) //=scaleCB->isEnabled()
(angle->text() != "0"));
setAutoText();
+ updateAspectRatioStatus();
}
-void GuiGraphicsDialog::on_angle_textChanged(const QString & filename)
-{
- rotateOrderCB->setEnabled((WidthCB->isChecked() ||
- HeightCB->isChecked() ||
- scaleCB->isChecked()) &&
- (filename != "0"));
-}
-
-
-GuiGraphics::GuiGraphics(Dialog & parent)
- : GuiView<GuiGraphicsDialog>(parent, _("Graphics"))
+void GuiGraphics::updateAspectRatioStatus()
{
+ // keepaspectratio only makes sense if both a width _and_ a
+ // height are given, since its function is (see graphics manual):
+ // "If set to true then specifying both 'width' and 'height'
+ // (or 'totalheight') does not distort the figure but scales
+ // such that neither of the specified dimensions is _exceeded_."
+ aspectratio->setEnabled(
+ WidthCB->isChecked() && !Width->text().isEmpty()
+ && Width->text() != qt_(autostr)
+ && HeightCB->isChecked() && !Height->text().isEmpty()
+ && Height->text() != qt_(autostr)
+ );
+ if (!aspectratio->isEnabled())
+ aspectratio->setChecked(false);
}
-void GuiGraphics::build_dialog()
+void GuiGraphics::on_aspectratio_toggled(bool aspectratio)
{
- dialog_.reset(new GuiGraphicsDialog(this));
-
- bcview().setOK(dialog_->okPB);
- bcview().setApply(dialog_->applyPB);
- bcview().setRestore(dialog_->restorePB);
- bcview().setCancel(dialog_->closePB);
-
- bcview().addReadOnly(dialog_->latexoptions);
- bcview().addReadOnly(dialog_->subfigure);
- bcview().addReadOnly(dialog_->filenameL);
- bcview().addReadOnly(dialog_->filename);
- bcview().addReadOnly(dialog_->browsePB);
- bcview().addReadOnly(dialog_->unzipCB);
- bcview().addReadOnly(dialog_->bbFrame);
- bcview().addReadOnly(dialog_->draftCB);
- bcview().addReadOnly(dialog_->clip);
- bcview().addReadOnly(dialog_->unzipCB);
- bcview().addReadOnly(dialog_->displayGB);
- bcview().addReadOnly(dialog_->sizeGB);
- bcview().addReadOnly(dialog_->rotationGB);
- bcview().addReadOnly(dialog_->latexoptions);
- bcview().addReadOnly(dialog_->getPB);
- bcview().addReadOnly(dialog_->rotateOrderCB);
-
- // initialize the length validator
- addCheckedLineEdit(bcview(), dialog_->Scale, dialog_->scaleCB);
- addCheckedLineEdit(bcview(), dialog_->Width, dialog_->WidthCB);
- addCheckedLineEdit(bcview(), dialog_->Height, dialog_->HeightCB);
- addCheckedLineEdit(bcview(), dialog_->displayscale, dialog_->scaleLA);
- addCheckedLineEdit(bcview(), dialog_->angle, dialog_->angleL);
- addCheckedLineEdit(bcview(), dialog_->lbX, dialog_->xL);
- addCheckedLineEdit(bcview(), dialog_->lbY, dialog_->yL);
- addCheckedLineEdit(bcview(), dialog_->rtX, dialog_->xL_2);
- addCheckedLineEdit(bcview(), dialog_->rtY, dialog_->yL_2);
- addCheckedLineEdit(bcview(), dialog_->filename, dialog_->filenameL);
+ if (aspectratio) {
+ WidthCB->setText(qt_("Set max. &width:"));
+ HeightCB->setText(qt_("Set max. &height:"));
+ Width->setToolTip(qt_("Maximal width of image in output"));
+ Height->setToolTip(qt_("Maximal height of image in output"));
+ } else {
+ WidthCB->setText(qt_("Set &width:"));
+ HeightCB->setText(qt_("Set &height:"));
+ Width->setToolTip(qt_("Width of image in output"));
+ Height->setToolTip(qt_("Height of image in output"));
+ }
}
-// returns the number of the string s in the vector v
-static int getItemNo(const vector<string> & v, string const & s)
+void GuiGraphics::on_angle_textChanged(const QString & filename)
{
- vector<string>::const_iterator cit =
- find(v.begin(), v.end(), s);
- return (cit != v.end()) ? int(cit - v.begin()) : 0;
+ rotateOrderCB->setEnabled((WidthCB->isChecked() ||
+ HeightCB->isChecked() ||
+ scaleCB->isChecked()) &&
+ (filename != "0"));
}
-void GuiGraphics::update_contents()
+void GuiGraphics::paramsToDialog(InsetGraphicsParams const & igp)
{
- // clear and fill in the comboboxes
- vector<string> const bb_units = frontend::getBBUnits();
- dialog_->lbXunit->clear();
- dialog_->lbYunit->clear();
- dialog_->rtXunit->clear();
- dialog_->rtYunit->clear();
- for (vector<string>::const_iterator it = bb_units.begin();
- it != bb_units.end(); ++it) {
- dialog_->lbXunit->addItem(toqstr(*it));
- dialog_->lbYunit->addItem(toqstr(*it));
- dialog_->rtXunit->addItem(toqstr(*it));
- dialog_->rtYunit->addItem(toqstr(*it));
+ static char const * const bb_units[] = { "bp", "cm", "mm", "in" };
+ static char const * const bb_units_gui[] = { N_("bp"), N_("cm"), N_("mm"), N_("in[[unit of measure]]") };
+ size_t const bb_size = sizeof(bb_units) / sizeof(bb_units[0]);
+
+ lbXunit->clear();
+ lbYunit->clear();
+ rtXunit->clear();
+ rtYunit->clear();
+
+ for (size_t i = 0; i < bb_size; i++) {
+ lbXunit->addItem(qt_(bb_units_gui[i]),
+ toqstr(bb_units[i]));
+ lbYunit->addItem(qt_(bb_units_gui[i]),
+ toqstr(bb_units[i]));
+ rtXunit->addItem(qt_(bb_units_gui[i]),
+ toqstr(bb_units[i]));
+ rtYunit->addItem(qt_(bb_units_gui[i]),
+ toqstr(bb_units[i]));
}
-
- InsetGraphicsParams & igp = controller().params();
-
+
// set the right default unit
- Length::UNIT unitDefault = Length::CM;
- switch (lyxrc.default_papersize) {
- case PAPER_USLETTER:
- case PAPER_USLEGAL:
- case PAPER_USEXECUTIVE:
- unitDefault = Length::IN;
- break;
- default:
- break;
- }
+ Length::UNIT const defaultUnit = Length::defaultUnit();
+ //lyxerr << bufferFilePath();
string const name =
- igp.filename.outputFilename(kernel().bufferFilepath());
- dialog_->filename->setText(toqstr(name));
+ igp.filename.outputFileName(fromqstr(bufferFilePath()));
+ filename->setText(toqstr(name));
// set the bounding box values
- if (igp.bb.empty()) {
- string const bb = controller().readBB(igp.filename.absFilename());
+ if (igp.bbox.empty()) {
+ string const bb = readBoundingBox(igp.filename.absFileName());
// the values from the file always have the bigpoint-unit bp
- dialog_->lbX->setText(toqstr(token(bb, ' ', 0)));
- dialog_->lbY->setText(toqstr(token(bb, ' ', 1)));
- dialog_->rtX->setText(toqstr(token(bb, ' ', 2)));
- dialog_->rtY->setText(toqstr(token(bb, ' ', 3)));
- dialog_->lbXunit->setCurrentIndex(0);
- dialog_->lbYunit->setCurrentIndex(0);
- dialog_->rtXunit->setCurrentIndex(0);
- dialog_->rtYunit->setCurrentIndex(0);
- controller().bbChanged = false;
+ doubleToWidget(lbX, token(bb, ' ', 0));
+ doubleToWidget(lbY, token(bb, ' ', 1));
+ doubleToWidget(rtX, token(bb, ' ', 2));
+ doubleToWidget(rtY, token(bb, ' ', 3));
+ lbXunit->setCurrentIndex(0);
+ lbYunit->setCurrentIndex(0);
+ rtXunit->setCurrentIndex(0);
+ rtYunit->setCurrentIndex(0);
+ bbChanged = false;
} else {
// get the values from the inset
- Length anyLength;
- string const xl(token(igp.bb, ' ', 0));
- string const yl(token(igp.bb, ' ', 1));
- string const xr(token(igp.bb, ' ', 2));
- string const yr(token(igp.bb, ' ', 3));
- if (isValidLength(xl, &anyLength)) {
- dialog_->lbX->setText(toqstr(convert<string>(anyLength.value())));
- string const unit(unit_name[anyLength.unit()]);
- dialog_->lbXunit->setCurrentIndex(getItemNo(bb_units, unit));
- } else {
- dialog_->lbX->setText(toqstr(xl));
- }
- if (isValidLength(yl, &anyLength)) {
- dialog_->lbY->setText(toqstr(convert<string>(anyLength.value())));
- string const unit(unit_name[anyLength.unit()]);
- dialog_->lbYunit->setCurrentIndex(getItemNo(bb_units, unit));
- } else {
- dialog_->lbY->setText(toqstr(xl));
- }
- if (isValidLength(xr, &anyLength)) {
- dialog_->rtX->setText(toqstr(convert<string>(anyLength.value())));
- string const unit(unit_name[anyLength.unit()]);
- dialog_->rtXunit->setCurrentIndex(getItemNo(bb_units, unit));
- } else {
- dialog_->rtX->setText(toqstr(xl));
- }
- if (isValidLength(yr, &anyLength)) {
- dialog_->rtY->setText(toqstr(convert<string>(anyLength.value())));
- string const unit(unit_name[anyLength.unit()]);
- dialog_->rtYunit->setCurrentIndex(getItemNo(bb_units, unit));
- } else {
- dialog_->rtY->setText(toqstr(xl));
- }
- controller().bbChanged = true;
+ doubleToWidget(lbX, igp.bbox.xl.value());
+ string unit = unit_name[igp.bbox.xl.unit()];
+ lbXunit->setCurrentIndex(lbXunit->findData(toqstr(unit)));
+ doubleToWidget(lbY, igp.bbox.yb.value());
+ unit = unit_name[igp.bbox.yb.unit()];
+ lbYunit->setCurrentIndex(lbYunit->findData(toqstr(unit)));
+ doubleToWidget(rtX, igp.bbox.xr.value());
+ unit = unit_name[igp.bbox.xr.unit()];
+ rtXunit->setCurrentIndex(rtXunit->findData(toqstr(unit)));
+ doubleToWidget(rtY, igp.bbox.yt.value());
+ unit = unit_name[igp.bbox.yt.unit()];
+ rtYunit->setCurrentIndex(rtYunit->findData(toqstr(unit)));
+ bbChanged = true;
}
// Update the draft and clip mode
- dialog_->draftCB->setChecked(igp.draft);
- dialog_->clip->setChecked(igp.clip);
- dialog_->unzipCB->setChecked(igp.noUnzip);
-
- // Update the subcaption check button and input field
- dialog_->subfigure->setChecked(igp.subcaption);
- dialog_->subcaption->setText(toqstr(igp.subcaptionText));
-
- int item = 0;
- switch (igp.display) {
- case graphics::DefaultDisplay: item = 0; break;
- case graphics::MonochromeDisplay: item = 1; break;
- case graphics::GrayscaleDisplay: item = 2; break;
- case graphics::ColorDisplay: item = 3; break;
- case graphics::NoDisplay: item = 0; break;
- }
- dialog_->showCB->setCurrentIndex(item);
- dialog_->displayscale->setText(toqstr(convert<string>(igp.lyxscale)));
- dialog_->displayGB->setChecked(igp.display != graphics::NoDisplay);
+ draftCB->setChecked(igp.draft);
+ clip->setChecked(igp.clip);
+ displayGB->setChecked(igp.display);
+ displayscale->setText(toqstr(convert<string>(igp.lyxscale)));
// the output section (width/height)
- dialog_->Scale->setText(toqstr(igp.scale));
+ doubleToWidget(Scale, igp.scale);
//igp.scale defaults to 100, so we treat it as empty
bool const scaleChecked = !igp.scale.empty() && igp.scale != "100";
- dialog_->scaleCB->blockSignals(true);
- dialog_->scaleCB->setChecked(scaleChecked);
- dialog_->scaleCB->blockSignals(false);
- dialog_->Scale->setEnabled(scaleChecked);
-
- lengthAutoToWidgets(dialog_->Width, dialog_->widthUnit, igp.width,
- unitDefault);
- bool const widthChecked = !dialog_->Width->text().isEmpty() &&
- dialog_->Width->text() != "auto";
- dialog_->WidthCB->blockSignals(true);
- dialog_->WidthCB->setChecked(widthChecked);
- dialog_->WidthCB->blockSignals(false);
- dialog_->Width->setEnabled(widthChecked);
- dialog_->widthUnit->setEnabled(widthChecked);
-
- lengthAutoToWidgets(dialog_->Height, dialog_->heightUnit, igp.height,
- unitDefault);
- bool const heightChecked = !dialog_->Height->text().isEmpty()
- && dialog_->Height->text() != "auto";
- dialog_->HeightCB->blockSignals(true);
- dialog_->HeightCB->setChecked(heightChecked);
- dialog_->HeightCB->blockSignals(false);
- dialog_->Height->setEnabled(heightChecked);
- dialog_->heightUnit->setEnabled(heightChecked);
-
- dialog_->scaleCB->setEnabled(!widthChecked && !heightChecked);
- dialog_->WidthCB->setEnabled(!scaleChecked);
- dialog_->HeightCB->setEnabled(!scaleChecked);
- dialog_->aspectratio->setEnabled(widthChecked && heightChecked);
-
- dialog_->setAutoText();
-
- dialog_->angle->setText(toqstr(igp.rotateAngle));
- dialog_->rotateOrderCB->setChecked(igp.scaleBeforeRotation);
-
- dialog_->rotateOrderCB->setEnabled((widthChecked ||
- heightChecked ||
- scaleChecked) &&
- (igp.rotateAngle != "0"));
-
- dialog_->origin->clear();
-
- vector<RotationOriginPair> origindata = getRotationOriginData();
- vector<docstring> const origin_lang = getFirst(origindata);
- GuiGraphics::origin_ltx = getSecond(origindata);
-
- for (vector<docstring>::const_iterator it = origin_lang.begin();
- it != origin_lang.end(); ++it)
- dialog_->origin->addItem(toqstr(*it));
+ scaleCB->blockSignals(true);
+ scaleCB->setChecked(scaleChecked);
+ scaleCB->blockSignals(false);
+ Scale->setEnabled(scaleChecked);
+ displayGB->setEnabled(lyxrc.display_graphics);
+
+ set<string> grp;
+ graphics::getGraphicsGroups(buffer(), grp);
+ set<string>::const_iterator it = grp.begin();
+ set<string>::const_iterator end = grp.end();
+ groupCO->blockSignals(true);
+ groupCO->clear();
+ for (; it != end; ++it)
+ groupCO->addItem(toqstr(*it), toqstr(*it));
+ groupCO->insertItem(0, qt_("None"), QString());
+ if (igp.groupId.empty())
+ groupCO->setCurrentIndex(0);
+ else
+ groupCO->setCurrentIndex(
+ groupCO->findData(toqstr(igp.groupId), Qt::MatchExactly));
+ groupCO->blockSignals(false);
- if (!igp.rotateOrigin.empty())
- dialog_->origin->setCurrentIndex(
- getItemNo(origin_ltx, igp.rotateOrigin));
+ if (igp.width.value() == 0)
+ lengthToWidgets(Width, widthUnit, _(autostr), defaultUnit);
else
- dialog_->origin->setCurrentIndex(0);
+ lengthToWidgets(Width, widthUnit, igp.width, defaultUnit);
+
+ bool const widthChecked = !Width->text().isEmpty() &&
+ Width->text() != qt_(autostr);
+ WidthCB->blockSignals(true);
+ WidthCB->setChecked(widthChecked);
+ WidthCB->blockSignals(false);
+ Width->setEnabled(widthChecked);
+ widthUnit->setEnabled(widthChecked);
- // disable edit button when no filename is present
- dialog_->editPB->setDisabled(dialog_->filename->text().isEmpty());
+ if (igp.height.value() == 0)
+ lengthToWidgets(Height, heightUnit, _(autostr), defaultUnit);
+ else
+ lengthToWidgets(Height, heightUnit, igp.height, defaultUnit);
+
+ bool const heightChecked = !Height->text().isEmpty()
+ && Height->text() != qt_(autostr);
+ HeightCB->blockSignals(true);
+ HeightCB->setChecked(heightChecked);
+ HeightCB->blockSignals(false);
+ Height->setEnabled(heightChecked);
+ heightUnit->setEnabled(heightChecked);
+
+ scaleCB->setEnabled(!widthChecked && !heightChecked);
+ WidthCB->setEnabled(!scaleChecked);
+ HeightCB->setEnabled(!scaleChecked);
+
+ setAutoText();
+ updateAspectRatioStatus();
+
+ doubleToWidget(angle, igp.rotateAngle);
+ rotateOrderCB->setChecked(igp.scaleBeforeRotation);
+
+ rotateOrderCB->setEnabled( (widthChecked || heightChecked || scaleChecked)
+ && igp.rotateAngle != "0");
+
+ origin->clear();
+
+ for (size_t i = 0; i < rorigin_size; i++) {
+ origin->addItem(qt_(rorigin_gui_strs[i]),
+ toqstr(rorigin_lyx_strs[i]));
+ }
- //// latex section
- dialog_->latexoptions->setText(toqstr(igp.special));
+ if (!igp.rotateOrigin.empty())
+ origin->setCurrentIndex(origin->findData(toqstr(igp.rotateOrigin)));
+ else
+ origin->setCurrentIndex(0);
+
+ // latex section
+ latexoptions->setText(toqstr(igp.special));
+ // cf bug #3852
+ filename->setFocus();
}
-void GuiGraphics::apply()
+void GuiGraphics::applyView()
{
- InsetGraphicsParams & igp = controller().params();
+ InsetGraphicsParams & igp = params_;
- igp.filename.set(internal_path(fromqstr(dialog_->filename->text())),
- kernel().bufferFilepath());
+ igp.filename.set(fromqstr(filename->text()), fromqstr(bufferFilePath()));
// the bb section
- igp.bb.erase();
- if (controller().bbChanged) {
- string bb;
- string lbX(fromqstr(dialog_->lbX->text()));
- string lbY(fromqstr(dialog_->lbY->text()));
- string rtX(fromqstr(dialog_->rtX->text()));
- string rtY(fromqstr(dialog_->rtY->text()));
+ igp.bbox = graphics::BoundingBox();
+ if (bbChanged) {
+ string lbXs = widgetToDoubleStr(lbX);
+ string lbYs = widgetToDoubleStr(lbY);
+ string rtXs = widgetToDoubleStr(rtX);
+ string rtYs = widgetToDoubleStr(rtY);
int bb_sum =
- convert<int>(lbX) + convert<int>(lbY) +
- convert<int>(rtX) + convert<int>(rtX);
+ convert<int>(lbXs) + convert<int>(lbYs) +
+ convert<int>(rtXs) + convert<int>(rtXs);
if (bb_sum) {
- if (lbX.empty())
- bb = "0 ";
- else
- bb = lbX + fromqstr(dialog_->lbXunit->currentText()) + ' ';
- if (lbY.empty())
- bb += "0 ";
- else
- bb += (lbY + fromqstr(dialog_->lbYunit->currentText()) + ' ');
- if (rtX.empty())
- bb += "0 ";
- else
- bb += (rtX + fromqstr(dialog_->rtXunit->currentText()) + ' ');
- if (rtY.empty())
- bb += '0';
- else
- bb += (rtY + fromqstr(dialog_->rtYunit->currentText()));
- igp.bb = bb;
+ if (lbXs.empty())
+ lbXs = "0";
+ igp.bbox.xl = Length(lbXs + fromqstr(lbXunit->currentText()));
+ if (lbYs.empty())
+ lbYs = "0";
+ igp.bbox.yb = Length(lbYs + fromqstr(lbYunit->currentText()));
+ if (rtXs.empty())
+ rtXs = "0";
+ igp.bbox.xr = Length(rtXs + fromqstr(rtXunit->currentText()));
+ if (rtYs.empty())
+ rtYs = "0";
+ igp.bbox.yt = Length(rtYs + fromqstr(rtYunit->currentText()));
}
}
- igp.draft = dialog_->draftCB->isChecked();
- igp.clip = dialog_->clip->isChecked();
- igp.subcaption = dialog_->subfigure->isChecked();
- igp.subcaptionText = fromqstr(dialog_->subcaption->text());
-
- switch (dialog_->showCB->currentIndex()) {
- case 0: igp.display = graphics::DefaultDisplay; break;
- case 1: igp.display = graphics::MonochromeDisplay; break;
- case 2: igp.display = graphics::GrayscaleDisplay; break;
- case 3: igp.display = graphics::ColorDisplay; break;
- default:;
- }
-
- if (!dialog_->displayGB->isChecked())
- igp.display = graphics::NoDisplay;
+ igp.draft = draftCB->isChecked();
+ igp.clip = clip->isChecked();
+ igp.display = displayGB->isChecked();
//the graphics section
- if (dialog_->scaleCB->isChecked() && !dialog_->Scale->text().isEmpty()) {
- igp.scale = fromqstr(dialog_->Scale->text());
+ if (scaleCB->isChecked() && !Scale->text().isEmpty()) {
+ igp.scale = widgetToDoubleStr(Scale);
igp.width = Length("0pt");
igp.height = Length("0pt");
igp.keepAspectRatio = false;
} else {
igp.scale = string();
- igp.width = dialog_->WidthCB->isChecked() ?
- //Note that this works even if dialog_->Width is "auto", since in
+ igp.width = WidthCB->isChecked() ?
+ //Note that this works even if Width is "auto", since in
//that case we get "0pt".
- Length(widgetsToLength(dialog_->Width, dialog_->widthUnit)):
+ Length(widgetsToLength(Width, widthUnit)):
Length("0pt");
- igp.height = dialog_->HeightCB->isChecked() ?
- Length(widgetsToLength(dialog_->Height, dialog_->heightUnit)) :
+ igp.height = HeightCB->isChecked() ?
+ Length(widgetsToLength(Height, heightUnit)) :
Length("0pt");
- igp.keepAspectRatio = dialog_->aspectratio->isEnabled() &&
- dialog_->aspectratio->isChecked() &&
- igp.width.value() > 0 && igp.height.value() > 0;
+ igp.keepAspectRatio = aspectratio->isChecked();
}
- igp.noUnzip = dialog_->unzipCB->isChecked();
-
- igp.lyxscale = convert<int>(fromqstr(dialog_->displayscale->text()));
+ igp.lyxscale = displayscale->text().toInt();
+ igp.rotateAngle = widgetToDoubleStr(angle);
- igp.rotateAngle = fromqstr(dialog_->angle->text());
-
- double rotAngle = convert<double>(igp.rotateAngle);
- if (std::abs(rotAngle) > 360.0) {
+ double rotAngle = widgetToDouble(angle);
+ if (abs(rotAngle) > 360.0) {
rotAngle -= 360.0 * floor(rotAngle / 360.0);
igp.rotateAngle = convert<string>(rotAngle);
}
// save the latex name for the origin. If it is the default
// then origin_ltx returns ""
igp.rotateOrigin =
- GuiGraphics::origin_ltx[dialog_->origin->currentIndex()];
-
- igp.scaleBeforeRotation = dialog_->rotateOrderCB->isChecked();
+ fromqstr(origin->itemData(origin->currentIndex()).toString());
+ igp.scaleBeforeRotation = rotateOrderCB->isChecked();
// more latex options
- igp.special = fromqstr(dialog_->latexoptions->text());
+ igp.special = fromqstr(latexoptions->text());
+
+ igp.groupId = fromqstr(groupCO->itemData(
+ groupCO->currentIndex()).toString());
+ current_group_ = igp.groupId;
}
void GuiGraphics::getBB()
{
- string const filename(fromqstr(dialog_->filename->text()));
- if (!filename.empty()) {
- string const bb(controller().readBB(filename));
- if (!bb.empty()) {
- dialog_->lbX->setText(toqstr(token(bb, ' ', 0)));
- dialog_->lbY->setText(toqstr(token(bb, ' ', 1)));
- dialog_->rtX->setText(toqstr(token(bb, ' ', 2)));
- dialog_->rtY->setText(toqstr(token(bb, ' ', 3)));
- // the default units for the bb values when reading
- // it from the file
- dialog_->lbXunit->setCurrentIndex(0);
- dialog_->lbYunit->setCurrentIndex(0);
- dialog_->rtXunit->setCurrentIndex(0);
- dialog_->rtYunit->setCurrentIndex(0);
+ string const fn = fromqstr(filename->text());
+ if (fn.empty())
+ return;
+ string const bb = readBoundingBox(fn);
+ bbChanged = false;
+ if (bb.empty())
+ return;
+ doubleToWidget(lbX, token(bb, ' ', 0));
+ doubleToWidget(lbY, token(bb, ' ', 1));
+ doubleToWidget(rtX, token(bb, ' ', 2));
+ doubleToWidget(rtY, token(bb, ' ', 3));
+ // the default units for the bb values when reading
+ // it from the file
+ lbXunit->setCurrentIndex(0);
+ lbYunit->setCurrentIndex(0);
+ rtXunit->setCurrentIndex(0);
+ rtYunit->setCurrentIndex(0);
+}
+
+
+bool GuiGraphics::isValid()
+{
+ return !filename->text().isEmpty();
+}
+
+
+bool GuiGraphics::initialiseParams(string const & data)
+{
+ InsetGraphics::string2params(data, buffer(), params_);
+ paramsToDialog(params_);
+ current_group_ = params_.groupId;
+ return true;
+}
+
+
+void GuiGraphics::clearParams()
+{
+ params_ = InsetGraphicsParams();
+}
+
+
+void GuiGraphics::dispatchParams()
+{
+ InsetGraphicsParams tmp_params(params_);
+ string const lfun = InsetGraphics::params2string(tmp_params, buffer());
+ dispatch(FuncRequest(getLfun(), lfun));
+}
+
+
+QString GuiGraphics::browse(QString const & in_name) const
+{
+ QString const title = qt_("Select graphics file");
+
+ // Does user clipart directory exist?
+ string clipdir = addName(package().user_support().absFileName(), "clipart");
+ FileName clip(clipdir);
+
+ // bail out to system clipart directory
+ if (!clip.isDirectory())
+ clipdir = addName(package().system_support().absFileName(), "clipart");
+
+ return browseRelToParent(in_name, bufferFilePath(),
+ title, fileFilters(QString()), false,
+ qt_("Clipart|#C#c"), toqstr(clipdir),
+ qt_("Documents|#o#O"), toqstr(lyxrc.document_path));
+}
+
+
+string GuiGraphics::readBoundingBox(string const & file)
+{
+ FileName const abs_file = support::makeAbsPath(file, fromqstr(bufferFilePath()));
+
+ // try to get it from the file, if possible. Zipped files are
+ // unzipped in the readBB_from_PSFile-Function
+ string const bb = graphics::readBB_from_PSFile(abs_file);
+ if (!bb.empty())
+ return bb;
+
+ // we don't, so ask the Graphics Cache if it has loaded the file
+ int width = 0;
+ int height = 0;
+
+ graphics::Cache & gc = graphics::Cache::get();
+ if (gc.inCache(abs_file)) {
+ graphics::Image const * image = gc.item(abs_file)->image();
+
+ if (image) {
+ width = image->width();
+ height = image->height();
}
- controller().bbChanged = false;
}
+
+ return ("0 0 " + convert<string>(width) + ' ' + convert<string>(height));
}
-bool GuiGraphics::isValid()
+bool GuiGraphics::isFileNameValid(string const & fname) const
{
- return !dialog_->filename->text().isEmpty();
+ // It may be that the filename is relative.
+ return support::makeAbsPath(fname, fromqstr(bufferFilePath())).isReadableFile();
}
-} // namespace frontend
-} // namespace lyx
+
+Dialog * createGuiGraphics(GuiView & lv) { return new GuiGraphics(lv); }
-#include "GuiGraphics_moc.cpp"
+} // namespace frontend
+} // namespace lyx
+#include "moc_GuiGraphics.cpp"