-/**
+/*!
* \file LyXAction.cpp
* This file is part of LyX, the document processor.
* Licence details can be found in the file COPYING.
#include "LyXAction.h"
-#include "debug.h"
#include "FuncRequest.h"
+#include "support/debug.h"
#include "support/lstrings.h"
#include <boost/assert.hpp>
+using namespace std;
+using namespace lyx::support;
namespace lyx {
-using support::split;
-using support::trim;
-
-using std::endl;
-using std::string;
-using std::ostream;
-
-
/*
NAMING RULES FOR USER-COMMANDS
Here's the set of rules to apply when a new command name is introduced:
(May 19 1996, 12:04, RvdK)
*/
+/* LFUN documentation (a start at least, Chr 2007-08-12)
+ *
+ * The documentation below is primarily notes about restrictions and
+ * oddities relating to the different LFUNs.
+ *
+ * Try to find an appropriate (thematical) place when adding the new LFUN.
+ *
+ * Doxygen template below. Some notes: Parameters should be set in uppercase
+ * and put in <BRACKETS>, as so.
+ */
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_
+ * \li Action:
+ * \li Notion:
+ * \li Syntax:
+ * \li Params:
+ * \li Sample:
+ * \li Origin:
+ * \endvar
+ */
+
LyXAction lyxaction;
-void LyXAction::newFunc(kb_action action, string const & name,
- unsigned int attrib)
+void LyXAction::newFunc(FuncCode action, string const & name,
+ unsigned int attrib, LyXAction::func_type type)
{
lyx_func_map[name] = action;
- func_info tmpinfo;
+ FuncInfo tmpinfo;
tmpinfo.name = name;
tmpinfo.attrib = attrib;
+ tmpinfo.type = type;
lyx_info_map[action] = tmpinfo;
}
+// Needed for LFUNs documentation to be accepted, since doxygen won't take
+// \var inside functions.
+#ifndef DOXYGEN_SHOULD_SKIP_THIS
void LyXAction::init()
{
// This function was changed to use the array below in initalization
if (init) return;
struct ev_item {
- kb_action action;
+ FuncCode action;
char const * name;
unsigned int attrib;
+ func_type type;
};
ev_item const items[] = {
- { LFUN_ACCENT_ACUTE, "accent-acute", Noop },
- { LFUN_ACCENT_BREVE, "accent-breve", Noop },
- { LFUN_ACCENT_CARON, "accent-caron", Noop },
- { LFUN_ACCENT_CEDILLA, "accent-cedilla", Noop },
- { LFUN_ACCENT_CIRCLE, "accent-circle", Noop },
- { LFUN_ACCENT_CIRCUMFLEX, "accent-circumflex", Noop },
- { LFUN_ACCENT_DOT, "accent-dot", Noop },
- { LFUN_ACCENT_GRAVE, "accent-grave", Noop },
- { LFUN_ACCENT_HUNGARIAN_UMLAUT, "accent-hungarian-umlaut", Noop },
- { LFUN_ACCENT_MACRON, "accent-macron", Noop },
- { LFUN_ACCENT_OGONEK, "accent-ogonek", Noop },
- { LFUN_ACCENT_SPECIAL_CARON, "accent-special-caron", Noop },
- { LFUN_ACCENT_TIE, "accent-tie", Noop },
- { LFUN_ACCENT_TILDE, "accent-tilde", Noop },
- { LFUN_ACCENT_UMLAUT, "accent-umlaut", Noop },
- { LFUN_ACCENT_UNDERBAR, "accent-underbar", Noop },
- { LFUN_ACCENT_UNDERDOT, "accent-underdot", Noop },
- { LFUN_APPENDIX, "appendix", Noop },
- { LFUN_BOOKMARK_GOTO, "bookmark-goto", NoBuffer },
- { LFUN_BOOKMARK_SAVE, "bookmark-save", ReadOnly },
- { LFUN_BOOKMARK_CLEAR, "bookmark-clear", NoBuffer },
- { LFUN_BREAK_LINE, "break-line", Noop },
- { LFUN_BREAK_PARAGRAPH, "break-paragraph", Noop },
- { LFUN_BREAK_PARAGRAPH_KEEP_LAYOUT, "break-paragraph-keep-layout", Noop },
- { LFUN_BREAK_PARAGRAPH_SKIP, "break-paragraph-skip", Noop },
- { LFUN_BUILD_PROGRAM, "build-program", ReadOnly },
- { LFUN_BUFFER_AUTO_SAVE, "buffer-auto-save", Noop },
- { LFUN_BUFFER_BEGIN, "buffer-begin", ReadOnly },
- { LFUN_BUFFER_BEGIN_SELECT, "buffer-begin-select", ReadOnly },
- { LFUN_BUFFER_CHILD_OPEN, "buffer-child-open", ReadOnly },
- { LFUN_BUFFER_CHKTEX, "buffer-chktex", ReadOnly },
- { LFUN_BUFFER_TOGGLE_COMPRESSION, "buffer-toggle-compression", Noop},
- { LFUN_BUFFER_CLOSE, "buffer-close", ReadOnly },
- { LFUN_BUFFER_END, "buffer-end", ReadOnly },
- { LFUN_BUFFER_END_SELECT, "buffer-end-select", ReadOnly },
- { LFUN_BUFFER_EXPORT, "buffer-export", ReadOnly },
- { LFUN_BUFFER_EXPORT_CUSTOM, "buffer-export-custom", ReadOnly },
- { LFUN_BUFFER_PRINT, "buffer-print", ReadOnly },
- { LFUN_BUFFER_IMPORT, "buffer-import", NoBuffer },
- { LFUN_BUFFER_NEW, "buffer-new", NoBuffer },
- { LFUN_BUFFER_NEW_TEMPLATE,"buffer-new-template", NoBuffer },
- { LFUN_BUFFER_RELOAD, "buffer-reload", ReadOnly },
- { LFUN_BUFFER_SWITCH, "buffer-switch", ReadOnly },
- { LFUN_BUFFER_TOGGLE_READ_ONLY, "buffer-toggle-read-only", ReadOnly },
- { LFUN_BUFFER_UPDATE, "buffer-update", ReadOnly },
- { LFUN_BUFFER_VIEW, "buffer-view", ReadOnly },
- { LFUN_BUFFER_WRITE, "buffer-write", ReadOnly },
- { LFUN_BUFFER_WRITE_AS, "buffer-write-as", ReadOnly },
- { LFUN_CANCEL, "cancel", NoBuffer },
- { LFUN_CAPTION_INSERT, "caption-insert", Noop },
- { LFUN_CHAR_BACKWARD, "char-backward", ReadOnly | NoUpdate},
- { LFUN_CHAR_BACKWARD_SELECT, "backward-select", ReadOnly | SingleParUpdate },
- { LFUN_CHAR_DELETE_BACKWARD, "delete-backward", SingleParUpdate },
- { LFUN_CHAR_DELETE_FORWARD, "delete-forward", SingleParUpdate },
- { LFUN_CHAR_FORWARD, "char-forward", ReadOnly | NoUpdate},
- { LFUN_CHAR_FORWARD_SELECT, "forward-select", ReadOnly | SingleParUpdate },
- { LFUN_CLIPBOARD_PASTE, "clipboard-paste", Noop },
- { LFUN_COMMAND_EXECUTE, "command-execute", NoBuffer },
- { LFUN_COMMAND_PREFIX, "command-prefix", NoBuffer },
- { LFUN_COMMAND_SEQUENCE, "command-sequence", NoBuffer },
- { LFUN_COPY, "copy", ReadOnly },
- { LFUN_CUT, "cut", Noop },
- { LFUN_DATE_INSERT, "date-insert", Noop },
- { LFUN_DELETE_BACKWARD_SKIP, "delete-backward-skip", Noop },
- { LFUN_DELETE_FORWARD_SKIP, "delete-forward-skip", Noop },
- { LFUN_DEPTH_DECREMENT, "depth-decrement", Noop },
- { LFUN_DEPTH_INCREMENT, "depth-increment", Noop },
- { LFUN_DOTS_INSERT, "dots-insert", Noop },
- { LFUN_DOWN, "down", ReadOnly | NoUpdate },
- { LFUN_DOWN_SELECT, "down-select", ReadOnly | SingleParUpdate },
- { LFUN_DROP_LAYOUTS_CHOICE, "drop-layouts-choice", ReadOnly },
- { LFUN_END_OF_SENTENCE_PERIOD_INSERT, "end-of-sentence-period-insert", Noop },
- { LFUN_ENVIRONMENT_INSERT, "environment-insert", Noop },
- { LFUN_ERROR_NEXT, "error-next", ReadOnly },
- { LFUN_ERT_INSERT, "ert-insert", Noop },
- { LFUN_FILE_INSERT, "file-insert", Noop },
- { LFUN_FILE_INSERT_PLAINTEXT, "file-insert-plaintext", Noop },
- { LFUN_FILE_INSERT_PLAINTEXT_PARA, "file-insert-plaintext-para", Noop },
- { LFUN_FILE_NEW, "file-new", NoBuffer },
- { LFUN_FILE_OPEN, "file-open", NoBuffer },
- { LFUN_FLOAT_INSERT, "float-insert", Noop },
- { LFUN_FLOAT_WIDE_INSERT, "float-wide-insert", Noop },
- { LFUN_WRAP_INSERT, "wrap-insert", Noop },
- { LFUN_FONT_BOLD, "font-bold", Noop },
- { LFUN_FONT_CODE, "font-code", Noop },
- { LFUN_FONT_DEFAULT, "font-default", Noop },
- { LFUN_FONT_EMPH, "font-emph", Noop },
- { LFUN_FONT_FREE_APPLY, "font-free-apply", Noop },
- { LFUN_FONT_FREE_UPDATE, "font-free-update", Noop },
- { LFUN_FONT_NOUN, "font-noun", Noop },
- { LFUN_FONT_ROMAN, "font-roman", Noop },
- { LFUN_FONT_SANS, "font-sans", Noop },
- { LFUN_FONT_FRAK, "font-frak", Noop },
- { LFUN_FONT_ITAL, "font-ital", Noop },
- { LFUN_FONT_SIZE, "font-size", Noop },
- { LFUN_FONT_STATE, "font-state", ReadOnly },
- { LFUN_FONT_UNDERLINE, "font-underline", Noop },
- { LFUN_FOOTNOTE_INSERT, "footnote-insert", Noop },
- { LFUN_HFILL_INSERT, "hfill-insert", Noop },
- { LFUN_HELP_OPEN, "help-open", NoBuffer | Argument},
- { LFUN_HTML_INSERT, "html-insert", Noop },
- { LFUN_HYPHENATION_POINT_INSERT, "hyphenation-point-insert", Noop },
- { LFUN_LIGATURE_BREAK_INSERT, "ligature-break-insert", Noop },
- { LFUN_INDEX_INSERT, "index-insert", Noop },
- { LFUN_INDEX_PRINT, "index-print", Noop },
- { LFUN_KEYMAP_OFF, "keymap-off", ReadOnly },
- { LFUN_KEYMAP_PRIMARY, "keymap-primary", ReadOnly },
- { LFUN_KEYMAP_SECONDARY, "keymap-secondary", ReadOnly },
- { LFUN_KEYMAP_TOGGLE, "keymap-toggle", ReadOnly },
- { LFUN_LABEL_INSERT, "label-insert", Noop },
- { LFUN_OPTIONAL_INSERT, "optional-insert", Noop },
- { LFUN_BIBITEM_INSERT, "bibitem-insert", Noop },
- { LFUN_CITATION_INSERT, "citation-insert", Noop },
- { LFUN_BIBTEX_DATABASE_ADD, "bibtex-database-add", Noop },
- { LFUN_BIBTEX_DATABASE_DEL, "bibtex-database-del", Noop },
- { LFUN_LINE_INSERT, "line-insert", Noop },
- { LFUN_PAGEBREAK_INSERT, "pagebreak-insert", Noop },
- { LFUN_LANGUAGE, "language", Noop },
- { LFUN_LAYOUT, "layout", Noop },
- { LFUN_LAYOUT_PARAGRAPH, "layout-paragraph", ReadOnly },
- { LFUN_LAYOUT_TABULAR, "layout-tabular", Noop },
- { LFUN_LINE_BEGIN, "line-begin", ReadOnly | NoUpdate},
- { LFUN_LINE_BEGIN_SELECT, "line-begin-select", ReadOnly | SingleParUpdate },
- { LFUN_LINE_DELETE, "line-delete-forward", Noop }, // there is no line-delete-backward
- { LFUN_LINE_END, "line-end", ReadOnly | NoUpdate},
- { LFUN_LINE_END_SELECT, "line-end-select", ReadOnly | SingleParUpdate },
-#if 0
- { LFUN_LIST_INSERT, "list-insert", Noop },
#endif
- { LFUN_LYX_QUIT, "lyx-quit", NoBuffer },
- { LFUN_MARGINALNOTE_INSERT, "marginalnote-insert", Noop },
- { LFUN_MARK_OFF, "mark-off", ReadOnly },
- { LFUN_MARK_ON, "mark-on", ReadOnly },
- { LFUN_MARK_TOGGLE, "mark-toggle", ReadOnly },
- { LFUN_MATH_DELIM, "math-delim", Noop },
- { LFUN_MATH_BIGDELIM, "math-bigdelim", Noop },
- { LFUN_MATH_DISPLAY, "math-display", Noop },
- { LFUN_MATH_INSERT, "math-insert", Noop },
- { LFUN_MATH_SUBSCRIPT, "math-subscript", Noop },
- { LFUN_MATH_SUPERSCRIPT, "math-superscript", Noop },
- { LFUN_MATH_LIMITS, "math-limits", Noop },
- { LFUN_MATH_MACRO, "math-macro", Noop },
- { LFUN_MATH_MUTATE, "math-mutate", Noop },
- { LFUN_MATH_SPACE, "math-space", Noop },
- { LFUN_MATH_IMPORT_SELECTION, "math-import-selection", Noop },
- { LFUN_MATH_MATRIX, "math-matrix", Noop },
- { LFUN_MATH_MODE, "math-mode", Noop },
- { LFUN_MATH_NONUMBER, "math-nonumber", Noop },
- { LFUN_MATH_NUMBER, "math-number", Noop },
- { LFUN_MATH_EXTERN, "math-extern", Noop },
- { LFUN_MATH_SIZE, "math-size", Noop },
- { LFUN_MENU_OPEN, "menu-open", NoBuffer },
- { LFUN_MENU_SEPARATOR_INSERT, "menu-separator-insert", Noop },
- { LFUN_META_PREFIX, "meta-prefix", NoBuffer },
- { LFUN_BRANCH_INSERT, "branch-insert", Noop },
- { LFUN_CHARSTYLE_INSERT, "charstyle-insert", Noop },
- { LFUN_NOTE_INSERT, "note-insert", Noop },
- { LFUN_BOX_INSERT, "box-insert", Noop },
- { LFUN_NOTE_NEXT, "note-next", ReadOnly },
- { LFUN_INSET_TOGGLE, "", ReadOnly },
- { LFUN_NEXT_INSET_TOGGLE, "next-inset-toggle", ReadOnly },
- { LFUN_ALL_INSETS_TOGGLE, "all-insets-toggle", ReadOnly },
- { LFUN_PARAGRAPH_DOWN, "paragraph-down", ReadOnly | NoUpdate},
- { LFUN_PARAGRAPH_DOWN_SELECT, "paragraph-down-select", ReadOnly },
- { LFUN_PARAGRAPH_GOTO, "paragraph-goto", ReadOnly },
- { LFUN_OUTLINE_UP, "outline-up", Noop },
- { LFUN_OUTLINE_DOWN, "outline-down", Noop },
- { LFUN_OUTLINE_IN, "outline-in", Noop },
- { LFUN_OUTLINE_OUT, "outline-out", Noop },
- { LFUN_PARAGRAPH_SPACING, "paragraph-spacing", Noop },
- { LFUN_PARAGRAPH_UP, "paragraph-up", ReadOnly | NoUpdate},
- { LFUN_PARAGRAPH_UP_SELECT, "paragraph-up-select", ReadOnly },
- { LFUN_PASTE, "paste", Noop },
- { LFUN_PREFERENCES_SAVE, "preferences-save", NoBuffer },
- { LFUN_PRIMARY_SELECTION_PASTE, "primary-selection-paste", Noop },
- { LFUN_QUOTE_INSERT, "quote-insert", Noop },
- { LFUN_RECONFIGURE, "reconfigure", NoBuffer },
- { LFUN_REDO, "redo", Noop },
- { LFUN_LABEL_GOTO, "label-goto", ReadOnly },
- { LFUN_REFERENCE_NEXT, "reference-next", ReadOnly },
- { LFUN_SCREEN_DOWN, "screen-down", ReadOnly },
- { LFUN_SCREEN_DOWN_SELECT, "screen-down-select", ReadOnly },
- { LFUN_SCREEN_FONT_UPDATE, "screen-font-update", NoBuffer },
- { LFUN_SCREEN_RECENTER, "screen-recenter", ReadOnly },
- { LFUN_SCREEN_UP, "screen-up", ReadOnly },
- { LFUN_SCREEN_UP_SELECT, "screen-up-select", ReadOnly },
- { LFUN_SELF_INSERT, "self-insert", SingleParUpdate },
- { LFUN_SPACE_INSERT, "space-insert", Noop },
- { LFUN_SERVER_CHAR_AFTER, "server-char-after", ReadOnly },
- { LFUN_SERVER_GET_FONT, "server-get-font", ReadOnly },
- { LFUN_SERVER_GET_LAYOUT, "server-get-layout", ReadOnly },
- { LFUN_SERVER_GET_NAME, "server-get-name", ReadOnly },
- { LFUN_SERVER_GET_XY, "server-get-xy", ReadOnly },
- { LFUN_SERVER_GOTO_FILE_ROW, "server-goto-file-row", ReadOnly },
- { LFUN_SERVER_NOTIFY, "server-notify", ReadOnly },
- { LFUN_SERVER_SET_XY, "server-set-xy", ReadOnly },
- { LFUN_SET_COLOR, "set-color", ReadOnly | NoBuffer },
- { LFUN_CELL_BACKWARD, "cell-backward", Noop },
- { LFUN_CELL_FORWARD, "cell-forward", Noop },
- { LFUN_CELL_SPLIT, "cell-split", Noop },
- { LFUN_TABULAR_INSERT, "tabular-insert", Noop },
- { LFUN_TABULAR_FEATURE, "tabular-feature", Noop },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_ACUTE
+ * \li Action: Adds an acute accent \htmlonly (á)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-acute
+ * \endvar
+ */
+ { LFUN_ACCENT_ACUTE, "accent-acute", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_BREVE
+ * \li Action: Adds a breve accent \htmlonly (ă)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-breve
+ * \endvar
+ */
+ { LFUN_ACCENT_BREVE, "accent-breve", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_CARON
+ * \li Action: Adds a caron \htmlonly (ǎ)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-caron
+ * \endvar
+ */
+ { LFUN_ACCENT_CARON, "accent-caron", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_CEDILLA
+ * \li Action: Adds a cedilla \htmlonly (ç)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-cedilla
+ * \endvar
+ */
+ { LFUN_ACCENT_CEDILLA, "accent-cedilla", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_CIRCLE
+ * \li Action: Adds a circle accent \htmlonly (å)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-circle
+ * \endvar
+ */
+ { LFUN_ACCENT_CIRCLE, "accent-circle", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_CIRCUMFLEX
+ * \li Action: Adds a circumflex \htmlonly (ê)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-circumflex
+ * \endvar
+ */
+ { LFUN_ACCENT_CIRCUMFLEX, "accent-circumflex", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_DOT
+ * \li Action: Adds a dot accent \htmlonly (ż)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-dot
+ * \endvar
+ */
+ { LFUN_ACCENT_DOT, "accent-dot", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_GRAVE
+ * \li Action: Adds a grave accent \htmlonly (è)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-grave
+ * \endvar
+ */
+ { LFUN_ACCENT_GRAVE, "accent-grave", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_HUNGARIAN_UMLAUT
+ * \li Action: Adds a Hungarian umlaut \htmlonly (ő)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-grave
+ * \endvar
+ */
+ { LFUN_ACCENT_HUNGARIAN_UMLAUT, "accent-hungarian-umlaut", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_MACRON
+ * \li Action: Adds a macron \htmlonly (ā)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-macron
+ * \endvar
+ */
+ { LFUN_ACCENT_MACRON, "accent-macron", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_OGONEK
+ * \li Action: Adds an ogonek accent \htmlonly (ą)\endhtmlonly
+ to the next character typed.
+ * \li Syntax: accent-ogonek
+ * \endvar
+ */
+ { LFUN_ACCENT_OGONEK, "accent-ogonek", Noop, Edit },
+ { LFUN_ACCENT_SPECIAL_CARON, "accent-special-caron", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_TIE
+ * \li Action: Adds a tie \htmlonly (a͡)\endhtmlonly
+ over the next two character typed.
+ * \li Notion: the following char will finish the tie.
+ * \li Syntax: accent-tie
+ * \endvar
+ */
+ { LFUN_ACCENT_TIE, "accent-tie", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_TILDE
+ * \li Action: Adds a tilde \htmlonly (ã)\endhtmlonly
+ over the next character typed.
+ * \li Syntax: accent-tilde
+ * \endvar
+ */
+ { LFUN_ACCENT_TILDE, "accent-tilde", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_UMLAUT
+ * \li Action: Adds an umlaut \htmlonly (ä)\endhtmlonly
+ over the next character typed.
+ * \li Syntax: accent-umlaut
+ * \endvar
+ */
+ { LFUN_ACCENT_UMLAUT, "accent-umlaut", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_UNDERBAR
+ * \li Action: Adds a bar \htmlonly (a̠)\endhtmlonly
+ under the next character typed.
+ * \li Syntax: accent-underbar
+ * \endvar
+ */
+ { LFUN_ACCENT_UNDERBAR, "accent-underbar", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ACCENT_UNDERDOT
+ * \li Action: Adds a dot \htmlonly (ạ)\endhtmlonly
+ under the next character typed.
+ * \li Syntax: accent-underdot
+ * \endvar
+ */
+ { LFUN_ACCENT_UNDERDOT, "accent-underdot", Noop, Edit },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CAPTION_INSERT
+ * \li Action: Inserts a caption inset.
+ * \li Syntax: caption-insert
+ * \li Origin: Lgb, 18 Jul 2000
+ * \endvar
+ */
+ { LFUN_CAPTION_INSERT, "caption-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_DATE_INSERT
+ * \li Action: Inserts the current date.
+ * \li Syntax: date-insert [<ARG>]
+ * \li Params: <ARG>: Format of date. The default value (%x) can be set
+ in Preferences->Date format. For possible formats
+ see manual page of strftime function.
+ * \li Origin: jdblair, 31 Jan 2000
+ * \endvar
+ */
+ { LFUN_DATE_INSERT, "date-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FOOTNOTE_INSERT
+ * \li Action: Inserts a footnote inset.
+ * \li Syntax: footnote-insert
+ * \li Origin: Jug, 7 Mar 2000
+ * \endvar
+ */
+ { LFUN_FOOTNOTE_INSERT, "footnote-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_ERT_INSERT
+ * \li Action: Inserts an ERT inset.
+ * \li Syntax: ert-insert
+ * \li Origin: Jug, 18 Feb 2000
+ * \endvar
+ */
+ { LFUN_ERT_INSERT, "ert-insert", Noop, Edit },
+ { LFUN_FLOAT_INSERT, "float-insert", Noop, Edit },
+ { LFUN_FLOAT_WIDE_INSERT, "float-wide-insert", Noop, Edit },
+ { LFUN_WRAP_INSERT, "wrap-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_OPTIONAL_INSERT
+ * \li Action: Inserts an optional-argument (short title) inset.
+ * \li Syntax: optional-insert
+ * \li Origin: Martin, 12 Aug 2002
+ * \endvar
+ */
+ { LFUN_OPTIONAL_INSERT, "optional-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LINE_INSERT
+ * \li Action: Inserts a horizontal line.
+ * \li Syntax: line-insert
+ * \li Origin: poenitz, Oct 27 2003
+ * \endvar
+ */
+ { LFUN_LINE_INSERT, "line-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_NEWPAGE_INSERT
+ * \li Action: Inserts a new page.
+ * \li Syntax: newpage-insert
+ * \li Origin: uwestoehr, 24 Nov 2007
+ * \endvar
+ */
+ { LFUN_NEWPAGE_INSERT, "newpage-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PAGEBREAK_INSERT
+ * \li Action: Inserts a pagebreak.
+ * \li Syntax: pagebreak-insert
+ * \li Origin: poenitz, Oct 27 2003
+ * \endvar
+ */
+ { LFUN_PAGEBREAK_INSERT, "pagebreak-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MARGINALNOTE_INSERT
+ * \li Action: Inserts a marginal note.
+ * \li Syntax: marginalnote-insert
+ * \li Origin: Lgb, 26 Jun 2000
+ * \endvar
+ */
+ { LFUN_MARGINALNOTE_INSERT, "marginalnote-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_UNICODE_INSERT
+ * \li Action: Inserts a single unicode character.
+ * \li Syntax: unicode-insert <CHAR>
+ * \li Params: <CHAR>: The character to insert, given as its code
+ point, in hexadecimal, e.g.: unicode-insert 0x0100.
+ * \li Origin: Lgb, 22 Oct 2006
+ * \endvar
+ */
+ { LFUN_UNICODE_INSERT, "unicode-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LISTING_INSERT
+ * \li Action: Inserts a new listings inset.
+ * \li Syntax: listing-insert
+ * \li Origin: Herbert, 10 Nov 2001; bpeng, 2 May 2007
+ * \endvar
+ */
+ { LFUN_LISTING_INSERT, "listing-insert", Noop, Edit },
+ { LFUN_QUOTE_INSERT, "quote-insert", Noop, Edit },
+ { LFUN_INFO_INSERT, "info-insert", Noop, Edit },
+ { LFUN_BRANCH_INSERT, "branch-insert", Noop, Edit },
+ { LFUN_BOX_INSERT, "box-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FLEX_INSERT
+ * \li Action: Inserts CharStyle, Custom inset or XML short element.
+ * \li Notion: Look into the Customization manual for more information about
+ these elements.\n
+ For dissolving the element see #LFUN_INSET_DISSOLVE.
+ * \li Syntax: flex-insert <TYPE:Name>
+ * \li Params: TYPE: CharStyle|Custom|Element|Standard
+ Identifies whether this is a Character Style, a
+ Custom Inset or an XML Element, and which dynamical
+ sub-menu this flex inset is in on the LyX menu tree.
+ If Standard (currently unused): none of these.
+ Name: This name must be defined either in your layout file
+ or imported by some module. The definition is\n
+ InsetLayout <TYPE:Name>
+ * \li Sample: flex-insert CharStyle:Code
+ * \endvar
+ */
+ { LFUN_FLEX_INSERT, "flex-insert", Noop, Edit },
+ { LFUN_SELF_INSERT, "self-insert", SingleParUpdate, Hidden },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_SPACE_INSERT
+ * \li Action: Inserts one of horizontal space insets.
+ * \li Syntax: space-insert <NAME> [<LEN>]
+ * \li Params: <NAME>: normal, protected, thin, quad, qquad, enspace, enskip,
+ negthinspace, hfill, hfill*, dotfill, hrulefill, hspace,
+ hspace* \n
+ <LEN>: length for custom spaces (hspace, hspace* for protected)
+ * \li Origin: JSpitzm, 20 May 2003, Mar 17 2008
+ * \endvar
+ */
+ { LFUN_SPACE_INSERT, "space-insert", Noop, Edit },
+ { LFUN_HYPERLINK_INSERT, "href-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_SPECIALCHAR_INSERT
+ * \li Action: Inserts various characters into the document.
+ * \li Syntax: specialchar-insert <CHAR>
+ * \li Params: <CHAR>: hyphenation, ligature-break, slash, nobreakdash, dots,
+ end-of-sentence, menu-separator.
+ * \li Origin: JSpitzm, 6 Dec 2007
+ * \endvar
+ */
+ { LFUN_SPECIALCHAR_INSERT, "specialchar-insert", Noop, Edit },
+ { LFUN_CLEARPAGE_INSERT, "clearpage-insert", Noop, Edit },
+ { LFUN_CLEARDOUBLEPAGE_INSERT, "cleardoublepage-insert", Noop, Edit },
+ { LFUN_TOC_INSERT, "toc-insert", Noop, Edit },
+ { LFUN_APPENDIX, "appendix", Noop, Edit },
+
#if 0
- { LFUN_THEOREM_INSERT, "theorem-insert", Noop },
+ { LFUN_LIST_INSERT, "list-insert", Noop, Edit },
#endif
- { LFUN_THESAURUS_ENTRY, "thesaurus-entry", ReadOnly },
- { LFUN_TOC_INSERT, "toc-insert", Noop },
- { LFUN_TOGGLE_CURSOR_FOLLOWS_SCROLLBAR, "toggle-cursor-follows-scrollbar", ReadOnly },
- { LFUN_UNDO, "undo", Noop },
- { LFUN_UP, "up", ReadOnly | NoUpdate},
- { LFUN_UP_SELECT, "up-select", ReadOnly | SingleParUpdate },
- { LFUN_URL_INSERT, "url-insert", Noop },
- { LFUN_VC_CHECK_IN, "vc-check-in", ReadOnly },
- { LFUN_VC_CHECK_OUT, "vc-check-out", ReadOnly },
- { LFUN_VC_REGISTER, "vc-register", ReadOnly },
- { LFUN_VC_REVERT, "vc-revert", ReadOnly },
- { LFUN_VC_UNDO_LAST, "vc-undo-last", ReadOnly },
- { LFUN_WORD_BACKWARD, "word-backward", ReadOnly | NoUpdate},
- { LFUN_WORD_BACKWARD_SELECT, "word-backward-select", ReadOnly | SingleParUpdate },
- { LFUN_WORD_CAPITALIZE, "word-capitalize", Noop },
- { LFUN_WORD_DELETE_BACKWARD, "word-delete-backward", Noop },
- { LFUN_WORD_DELETE_FORWARD, "word-delete-forward", Noop },
- { LFUN_WORD_FIND_BACKWARD, "word-find-backward", ReadOnly },
- { LFUN_WORD_FIND_FORWARD, "word-find-forward", ReadOnly },
- { LFUN_WORD_FORWARD, "word-forward", ReadOnly | NoUpdate},
- { LFUN_WORD_FORWARD_SELECT, "word-forward-select", ReadOnly | SingleParUpdate },
- { LFUN_WORD_LOWCASE, "word-lowcase", Noop },
- { LFUN_WORD_SELECT, "word-select", ReadOnly },
- { LFUN_WORD_UPCASE, "word-upcase", Noop },
- { LFUN_MESSAGE, "message", NoBuffer },
- { LFUN_CHARS_TRANSPOSE, "chars-transpose", Noop },
- { LFUN_FLOAT_LIST, "float-list", Noop },
- { LFUN_ESCAPE, "escape", ReadOnly },
- { LFUN_CHANGES_TRACK, "changes-track", Noop },
- { LFUN_CHANGES_OUTPUT, "changes-output", Noop },
- { LFUN_CHANGE_NEXT, "change-next", ReadOnly },
- { LFUN_CHANGES_MERGE, "changes-merge", Noop },
- { LFUN_CHANGE_ACCEPT, "change-accept", Noop },
- { LFUN_CHANGE_REJECT, "change-reject", Noop },
- { LFUN_ALL_CHANGES_ACCEPT, "all-changes-accept", Noop },
- { LFUN_ALL_CHANGES_REJECT, "all-changes-reject", Noop },
- { LFUN_DIALOG_SHOW, "dialog-show", NoBuffer },
- { LFUN_DIALOG_SHOW_NEW_INSET, "dialog-show-new-inset", Noop },
- { LFUN_DIALOG_UPDATE, "dialog-update", NoBuffer },
- { LFUN_DIALOG_HIDE, "dialog-hide", NoBuffer },
- { LFUN_DIALOG_TOGGLE, "dialog-toggle", NoBuffer },
- { LFUN_DIALOG_DISCONNECT_INSET, "dialog-disconnect-inset", Noop },
- { LFUN_INSET_APPLY, "inset-apply", Noop },
- { LFUN_INSET_DISSOLVE, "inset-dissolve", Noop },
- { LFUN_INSET_INSERT, "inset-insert", Noop },
- { LFUN_INSET_MODIFY, "", Noop },
- { LFUN_INSET_DIALOG_UPDATE, "", Noop },
- { LFUN_INSET_SETTINGS, "inset-settings", ReadOnly },
- { LFUN_PARAGRAPH_PARAMS_APPLY, "paragraph-params-apply", Noop },
- { LFUN_PARAGRAPH_UPDATE, "", Noop },
- { LFUN_EXTERNAL_EDIT, "external-edit", Noop },
- { LFUN_GRAPHICS_EDIT, "graphics-edit", Noop },
- { LFUN_REPEAT, "repeat", NoBuffer },
- { LFUN_WORD_FIND, "word-find", ReadOnly },
- { LFUN_WORD_REPLACE, "word-replace", Noop },
- { LFUN_BUFFER_LANGUAGE, "buffer-language", Noop },
- { LFUN_TEXTCLASS_APPLY, "textclass-apply", Noop },
- { LFUN_TEXTCLASS_LOAD, "textclass-load", Noop },
- { LFUN_BUFFER_SAVE_AS_DEFAULT, "buffer-save-as-default", Noop },
- { LFUN_BUFFER_PARAMS_APPLY, "buffer-params-apply", Noop },
- { LFUN_LYXRC_APPLY, "lyxrc-apply", NoBuffer },
- { LFUN_INSET_REFRESH, "", Noop },
- { LFUN_BUFFER_NEXT, "buffer-next", ReadOnly },
- { LFUN_BUFFER_PREVIOUS, "buffer-previous", ReadOnly },
- { LFUN_WORDS_COUNT, "words-count", ReadOnly },
- { LFUN_FINISHED_RIGHT, "", ReadOnly },
- { LFUN_FINISHED_LEFT, "", ReadOnly },
- { LFUN_MOUSE_PRESS, "", ReadOnly },
- { LFUN_MOUSE_MOTION, "", ReadOnly | SingleParUpdate },
- { LFUN_MOUSE_RELEASE, "", ReadOnly },
- { LFUN_MOUSE_DOUBLE, "", ReadOnly },
- { LFUN_MOUSE_TRIPLE, "", ReadOnly },
- { LFUN_PARAGRAPH_MOVE_DOWN, "paragraph-move-down", Noop },
- { LFUN_PARAGRAPH_MOVE_UP, "paragraph-move-up", Noop },
- { LFUN_WINDOW_NEW, "window-new", NoBuffer },
- { LFUN_WINDOW_CLOSE, "window-close", NoBuffer },
- { LFUN_UNICODE_INSERT, "unicode-insert", Noop },
- { LFUN_TOOLBAR_TOGGLE, "toolbar-toggle", NoBuffer },
- { LFUN_NOMENCL_INSERT, "nomencl-insert", Noop },
- { LFUN_NOMENCL_PRINT, "nomencl-print", Noop },
- { LFUN_CLEARPAGE_INSERT, "clearpage-insert", Noop },
- { LFUN_CLEARDOUBLEPAGE_INSERT, "cleardoublepage-insert", Noop },
- { LFUN_LISTING_INSERT, "listing-insert", Noop },
-
- { LFUN_NOACTION, "", Noop }
+
+ { LFUN_DELETE_BACKWARD_SKIP, "delete-backward-skip", Noop, Edit },
+ { LFUN_DELETE_FORWARD_SKIP, "delete-forward-skip", Noop, Edit },
+ { LFUN_DOWN, "down", ReadOnly | NoUpdate, Edit },
+ { LFUN_DOWN_SELECT, "down-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_UP, "up", ReadOnly | NoUpdate, Edit },
+ { LFUN_UP_SELECT, "up-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_SCREEN_DOWN, "screen-down", ReadOnly, Edit },
+ { LFUN_SCREEN_DOWN_SELECT, "screen-down-select", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_SCROLL
+ * \li Action: Scroll the buffer view.
+ * \li Notion: Only scrolls the screen up or down; does not move the cursor.
+ * \li Syntax: scroll <TYPE> <QUANTITY>
+ * \li Params: <TYPE>: line|page\n
+ <QUANTITY>: up|down|<number>
+ * \li Origin: Abdelrazak Younes, Dec 27 2007
+ * \endvar
+ */
+ { LFUN_SCROLL, "scroll", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_SCREEN_RECENTER
+ * \li Action: Recenters the screen on the current cursor position.
+ * \li Syntax: screen-recenter
+ * \endvar
+ */
+ { LFUN_SCREEN_RECENTER, "screen-recenter", ReadOnly, Edit },
+ { LFUN_SCREEN_UP, "screen-up", ReadOnly, Edit },
+ { LFUN_SCREEN_UP_SELECT, "screen-up-select", ReadOnly, Edit },
+
+ { LFUN_ERROR_NEXT, "error-next", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CHAR_BACKWARD
+ * \li Action: Moves the cursor one position logically backwards.
+ * \li Notion: This is not the action which should be bound to the arrow keys,
+ because backwards may be left or right, depending on the
+ language. The arrow keys should be bound to #LFUN_CHAR_LEFT or
+ #LFUN_CHAR_RIGHT actions, which in turn may employ this one.
+ * \li Syntax: char-backward
+ * \endvar
+ */
+ { LFUN_CHAR_BACKWARD, "char-backward", ReadOnly | NoUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CHAR_BACKWARD_SELECT
+ * \li Action: Moves the cursor one position logically backwards, adding
+ traversed position to the selection.
+ * \li Notion: See also #LFUN_CHAR_BACKWARD.
+ * \li Syntax: char-backward-select
+ * \endvar
+ */
+ { LFUN_CHAR_BACKWARD_SELECT, "char-backward-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_CHAR_DELETE_BACKWARD, "delete-backward", SingleParUpdate, Edit },
+ { LFUN_CHAR_DELETE_FORWARD, "delete-forward", SingleParUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CHAR_FORWARD
+ * \li Action: Moves the cursor one position logically forward.
+ * \li Notion: This is not the action which should be bound to the arrow keys,
+ because forward may be left or right, depending on the language.
+ The arrow keys should be bound to #LFUN_CHAR_LEFT or
+ #LFUN_CHAR_RIGHT actions, which in turn may employ this one.
+ * \li Syntax: char-forward
+ * \endvar
+ */
+ { LFUN_CHAR_FORWARD, "char-forward", ReadOnly | NoUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CHAR_FORWARD_SELECT
+ * \li Action: Moves the cursor one position logically forward, adding
+ traversed position to the selection.
+ * \li Notion: See also #LFUN_CHAR_FORWARD.
+ * \li Syntax: char-forward-select
+ * \endvar
+ */
+ { LFUN_CHAR_FORWARD_SELECT, "char-forward-select", ReadOnly | SingleParUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CHAR_LEFT
+ * \li Action: Moves the cursor one position "to the left".
+ * \li Notion: This is the action which should be taken when the "left" key
+ is pressed. Generally, it moves the cursor one position to the
+ left. However, in Bidi text this become slightly more
+ complicated, and there are different modes of cursor movement.
+ In "visual mode", this moves left, plain and simple. In "logical
+ mode", movement is logically forward in RTL paragraphs, and
+ logically backwards in LTR paragraphs.
+ * \li Syntax: char-left
+ * \endvar
+ */
+ { LFUN_CHAR_LEFT, "char-left", ReadOnly | NoUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CHAR_LEFT_SELECT
+ * \li Action: Moves the cursor one position "to the left", adding
+ traversed position to the selection.
+ * \li Notion: See also #LFUN_CHAR_LEFT for exact details of the movement.
+ * \li Syntax: char-left-select
+ * \endvar
+ */
+ { LFUN_CHAR_LEFT_SELECT, "char-left-select", ReadOnly | SingleParUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CHAR_RIGHT
+ * \li Action: Moves the cursor one position "to the right".
+ * \li Notion: This is the action which should be taken when the "right" key
+ is pressed. Generally, it moves the cursor one position to the
+ right. However, in Bidi text this become slightly more
+ complicated, and there are different modes of cursor movement.
+ In "visual mode", this moves right, plain and simple. In "logical
+ mode", movement is logically forward in LTR paragraphs, and
+ logically backwards in RTL paragraphs.
+ * \li Syntax: char-right
+ * \endvar
+ */
+ { LFUN_CHAR_RIGHT, "char-right", ReadOnly | NoUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CHAR_RIGHT_SELECT
+ * \li Action: Moves the cursor one position "to the right", adding
+ traversed position to the selection.
+ * \li Notion: See also #LFUN_CHAR_RIGHT for exact details of the movement.
+ * \li Syntax: char-right-select
+ * \endvar
+ */
+ { LFUN_CHAR_RIGHT_SELECT, "char-right-select", ReadOnly | SingleParUpdate, Edit },
+
+ { LFUN_WORD_BACKWARD, "word-backward", ReadOnly | NoUpdate, Edit },
+ { LFUN_WORD_BACKWARD_SELECT, "word-backward-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_WORD_CAPITALIZE, "word-capitalize", Noop, Edit },
+ { LFUN_WORD_DELETE_BACKWARD, "word-delete-backward", Noop, Edit },
+ { LFUN_WORD_DELETE_FORWARD, "word-delete-forward", Noop, Edit },
+ { LFUN_WORD_FIND_BACKWARD, "word-find-backward", ReadOnly, Edit },
+ { LFUN_WORD_FIND_FORWARD, "word-find-forward", ReadOnly, Edit },
+ { LFUN_WORD_FORWARD, "word-forward", ReadOnly | NoUpdate, Edit },
+ { LFUN_WORD_FORWARD_SELECT, "word-forward-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_WORD_LEFT, "word-left", ReadOnly | NoUpdate, Edit },
+ { LFUN_WORD_LEFT_SELECT, "word-left-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_WORD_LOWCASE, "word-lowcase", Noop, Edit },
+ { LFUN_WORD_RIGHT, "word-right", ReadOnly | NoUpdate, Edit },
+ { LFUN_WORD_RIGHT_SELECT, "word-right-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_WORD_SELECT, "word-select", ReadOnly, Edit },
+ { LFUN_WORD_UPCASE, "word-upcase", Noop, Edit },
+ { LFUN_WORD_FIND, "word-find", ReadOnly, Edit },
+ { LFUN_WORD_REPLACE, "word-replace", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_THESAURUS_ENTRY
+ * \li Action: Look up thesaurus entries with respect to the word under the cursor.
+ * \li Syntax: thesaurus-entry
+ * \li Origin: Levon, 20 Jul 2001
+ * \endvar
+ */
+ { LFUN_THESAURUS_ENTRY, "thesaurus-entry", ReadOnly, Edit },
+ { LFUN_BUFFER_BEGIN, "buffer-begin", ReadOnly, Edit },
+ { LFUN_BUFFER_BEGIN_SELECT, "buffer-begin-select", ReadOnly, Edit },
+ { LFUN_BUFFER_END, "buffer-end", ReadOnly, Edit },
+ { LFUN_BUFFER_END_SELECT, "buffer-end-select", ReadOnly, Edit },
+
+ { LFUN_LINE_BEGIN, "line-begin", ReadOnly | NoUpdate, Edit },
+ { LFUN_LINE_BEGIN_SELECT, "line-begin-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_LINE_BREAK, "line-break", Noop, Edit },
+ { LFUN_LINE_DELETE, "line-delete-forward", Noop, Edit }, // there is no line-delete-backward
+ { LFUN_LINE_END, "line-end", ReadOnly | NoUpdate, Edit },
+ { LFUN_LINE_END_SELECT, "line-end-select", ReadOnly | SingleParUpdate, Edit },
+ { LFUN_NEW_LINE, "new-line", Noop, Edit },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_COPY
+ * \li Action: Copies to the clipboard the last edit.
+ * \li Syntax: copy
+ * \endvar
+ */
+ { LFUN_COPY, "copy", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CUT
+ * \li Action: Cuts to the clipboard.
+ * \li Syntax: cut
+ * \endvar
+ */
+ { LFUN_CUT, "cut", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PASTE
+ * \li Action: Pastes from the active clipboard.
+ * \li Syntax: paste
+ * \endvar
+ */
+ { LFUN_PASTE, "paste", Noop, Edit },
+ { LFUN_CLIPBOARD_PASTE, "clipboard-paste", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PRIMARY_SELECTION_PASTE
+ * \li Action: Pastes the material currently selected.
+ * \li Syntax: primary-selection-paste
+ * \endvar
+ */
+ { LFUN_PRIMARY_SELECTION_PASTE, "primary-selection-paste", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_UNDO
+ * \li Action: Undoes the last edit.
+ * \li Syntax: undo
+ * \endvar
+ */
+ { LFUN_UNDO, "undo", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_REDO
+ * \li Action: Redoes the last thing undone.
+ * \li Syntax: redo
+ * \endvar
+ */
+ { LFUN_REDO, "redo", Noop, Edit },
+ { LFUN_REPEAT, "repeat", NoBuffer, Edit },
+ { LFUN_CHARS_TRANSPOSE, "chars-transpose", Noop, Edit },
+
+ { LFUN_DEPTH_DECREMENT, "depth-decrement", Noop, Edit },
+ { LFUN_DEPTH_INCREMENT, "depth-increment", Noop, Edit },
+ { LFUN_ENVIRONMENT_INSERT, "environment-insert", Noop, Edit },
+
+ { LFUN_FONT_BOLD, "font-bold", Noop, Layout },
+ { LFUN_FONT_TYPEWRITER, "font-typewriter", Noop, Layout },
+ { LFUN_FONT_DEFAULT, "font-default", Noop, Layout },
+ { LFUN_FONT_EMPH, "font-emph", Noop, Layout },
+ { LFUN_FONT_FREE_APPLY, "font-free-apply", Noop, Layout },
+ { LFUN_FONT_FREE_UPDATE, "font-free-update", Noop, Layout },
+ { LFUN_FONT_NOUN, "font-noun", Noop, Layout },
+ { LFUN_FONT_ROMAN, "font-roman", Noop, Layout },
+ { LFUN_FONT_SANS, "font-sans", Noop, Layout },
+ { LFUN_FONT_FRAK, "font-frak", Noop, Layout },
+ { LFUN_FONT_ITAL, "font-ital", Noop, Layout },
+ { LFUN_FONT_SIZE, "font-size", Noop, Layout },
+ { LFUN_FONT_STATE, "font-state", ReadOnly, Layout },
+ { LFUN_FONT_UNDERLINE, "font-underline", Noop, Layout },
+ { LFUN_SCREEN_FONT_UPDATE, "screen-font-update", NoBuffer, Layout },
+
+ { LFUN_INDEX_INSERT, "index-insert", Noop, Edit },
+ { LFUN_INDEX_PRINT, "index-print", Noop, Edit },
+
+ { LFUN_NOMENCL_INSERT, "nomencl-insert", Noop, Edit },
+ { LFUN_NOMENCL_PRINT, "nomencl-print", Noop, Edit },
+
+ { LFUN_NOTE_INSERT, "note-insert", Noop, Edit },
+ { LFUN_NOTE_NEXT, "note-next", ReadOnly, Edit },
+
+ { LFUN_BIBITEM_INSERT, "bibitem-insert", Noop, Edit },
+ { LFUN_CITATION_INSERT, "citation-insert", Noop, Edit },
+ { LFUN_BIBTEX_DATABASE_ADD, "bibtex-database-add", Noop, Edit },
+ { LFUN_BIBTEX_DATABASE_DEL, "bibtex-database-del", Noop, Edit },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LAYOUT
+ * \li Action: Sets the layout (that is, environment) for the current paragraph.
+ * \li Syntax: layout <LAYOUT>
+ * \li Params: <LAYOUT>: the layout to use
+ * \endvar
+ */
+ { LFUN_LAYOUT, "layout", Noop, Layout },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LAYOUT_PARAGRAPH
+ * \li Action: Launches the paragraph settings dialog.
+ * \li Syntax: layout-paragraph
+ * \endvar
+ */
+ { LFUN_LAYOUT_PARAGRAPH, "layout-paragraph", ReadOnly, Layout },
+ { LFUN_LAYOUT_TABULAR, "layout-tabular", Noop, Layout },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_DROP_LAYOUTS_CHOICE
+ * \li Action: Displays list of layout choices.
+ * \li Notion: In the current (as of 2007) Qt4 frontend, this LFUN opens the
+ dropbox allowing for choice of layout.
+ * \li Syntax: drop-layouts-choice
+ * \endvar
+ */
+ { LFUN_DROP_LAYOUTS_CHOICE, "drop-layouts-choice", ReadOnly, Layout },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LAYOUT_MODULES_CLEAR
+ * \li Action: Clears the module list.
+ * \li Notion: Clears the list of included modules for the current buffer.
+ * \li Syntax: layout-modules-clear
+ * \li Origin: rgh, 25 August 2007
+ * \endvar
+ */
+ { LFUN_LAYOUT_MODULES_CLEAR, "layout-modules-clear", Noop, Layout },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LAYOUT_MODULE_ADD
+ * \li Action: Adds a module.
+ * \li Notion: Adds a module to the list of included modules for the current buffer.
+ * \li Syntax: layout-module-add <MODULE>
+ * \li Params: <MODULE>: the module to be added
+ * \li Origin: rgh, 25 August 2007
+ * \endvar
+ */
+ { LFUN_LAYOUT_MODULE_ADD, "layout-module-add", Noop, Layout },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LAYOUT_RELOAD
+ * \li Action: Reloads layout information.
+ * \li Notion: Reloads all layout information for the current buffer from disk, thus
+ recognizing any changes that have been made to layout files on the fly.
+ This is intended to be used only by layout developers and should not be
+ used when one is trying to do actual work.
+ * \li Syntax: layout-reload
+ * \li Origin: rgh, 3 September 2007
+ * \endvar
+ */
+ { LFUN_LAYOUT_RELOAD, "layout-reload", Noop, Layout },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_TEXTCLASS_APPLY
+ * \li Action: Sets the text class for the current buffer.
+ * \li Syntax: textclass-apply <TEXTCLASS>
+ * \li Params: <TEXTCLASS>: the textclass to set. Note that this must be
+ the filename, minus the ".layout" extension.
+ * \endvar
+ */
+ { LFUN_TEXTCLASS_APPLY, "textclass-apply", Noop, Layout },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_TEXTCLASS_LOAD
+ * \li Action: Loads information for a textclass from disk.
+ * \li Syntax: textclass-load <TEXTCLASS>
+ * \li Params: <TEXTCLASS>: the textclass to load. Note that this must be
+ the filename, minus the ".layout" extension.
+ * \endvar
+ */
+ { LFUN_TEXTCLASS_LOAD, "textclass-load", Noop, Layout },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MARK_OFF
+ * \li Action: Disable selecting of text-region.
+ * \li Syntax: mark-off
+ * \endvar
+ */
+ { LFUN_MARK_OFF, "mark-off", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MARK_ON
+ * \li Action: Enable selecting of text-region.
+ * \li Notion: After enabling you can simply move arrow keys to get selected region.
+ * \li Syntax: mark-on
+ * \endvar
+ */
+ { LFUN_MARK_ON, "mark-on", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MARK_TOGGLE
+ * \li Action: Toggle between #LFUN_MARK_ON and #LFUN_MARK_OFF .
+ * \li Syntax: mark-toggle
+ * \li Origin: poenitz, May 5 2006
+ * \endvar
+ */
+ { LFUN_MARK_TOGGLE, "mark-toggle", ReadOnly, Edit },
+
+ { LFUN_MATH_DELIM, "math-delim", Noop, Math },
+ { LFUN_MATH_BIGDELIM, "math-bigdelim", Noop, Math },
+ { LFUN_MATH_DISPLAY, "math-display", Noop, Math },
+ { LFUN_MATH_INSERT, "math-insert", Noop, Math },
+ { LFUN_MATH_SUBSCRIPT, "math-subscript", Noop, Math },
+ { LFUN_MATH_SUPERSCRIPT, "math-superscript", Noop, Math },
+ { LFUN_MATH_LIMITS, "math-limits", Noop, Math },
+ { LFUN_MATH_MACRO, "math-macro", Noop, Math },
+ { LFUN_MATH_MUTATE, "math-mutate", Noop, Math },
+ { LFUN_MATH_SPACE, "math-space", Noop, Math },
+ { LFUN_MATH_IMPORT_SELECTION, "math-import-selection", Noop, Math },
+ { LFUN_MATH_MATRIX, "math-matrix", Noop, Math },
+ { LFUN_MATH_MODE, "math-mode", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_NUMBER_LINE_TOGGLE
+ * \li Action: Toggles numbering of the current formula line.
+ * \li Notion: Must be in display formula mode.
+ * \li Syntax: math-number-line-toggle
+ * \li Origin: Alejandro 18 Jun 1996
+ * \endvar
+ */
+ { LFUN_MATH_NUMBER_LINE_TOGGLE, "math-number-line-toggle", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_NUMBER_TOGGLE
+ * \li Action: Toggles numbering/labeling of the current formula.
+ * \li Notion: Must be in display formula mode.
+ * \li Syntax: math-number-toggle
+ * \li Origin: Alejandro 4 Jun 1996
+ * \endvar
+ */
+ { LFUN_MATH_NUMBER_TOGGLE, "math-number-toggle", Noop, Math },
+ { LFUN_MATH_EXTERN, "math-extern", Noop, Math },
+ { LFUN_MATH_SIZE, "math-size", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_UNFOLD
+ * \li Action: Unfold a Math Macro.
+ * \li Notion: Unfold the Math Macro the cursor is in, i.e.
+ display it as \foo.
+ * \li Syntax: math-macro-unfold
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_UNFOLD, "math-macro-unfold", ReadOnly | SingleParUpdate, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_FOLD
+ * \li Action: Fold a Math Macro.
+ * \li Notion: Fold the Math Macro the cursor is in if it was
+ unfolded, i.e. displayed as \foo before.
+ * \li Syntax: math-macro-fold
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_FOLD, "math-macro-fold", ReadOnly | SingleParUpdate, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_ADD_PARAM
+ * \li Action: Add a parameter.
+ * \li Notion: Add a parameter to a Math Macro.
+ * \li Params: <NUM>: The number of the parameter behind which the new one
+ will be added (1 for the first, i.e. use 0 for add a
+ parameter at the left), defaults to the last one.
+ * \li Syntax: math-macro-add-param <NUM>
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_ADD_PARAM, "math-macro-add-param", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_REMOVE_PARAM
+ * \li Action: Remove the last parameter.
+ * \li Notion: Remove the last parameter of a Math Macro and
+ remove its value in all instances of the macro
+ in the buffer.
+ * \li Params: <NUM>: The number of the parameter to be deleted (1 for
+ the first), defaults to the last one.
+ * \li Syntax: math-macro-remove-param <NUM>
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_REMOVE_PARAM, "math-macro-remove-param", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_APPEND_GREEDY_PARAM
+ * \li Action: Append a greedy parameter.
+ * \li Notion: Append a greedy parameter to a Math Macro which
+ eats the following mathed cell in every instance of
+ the macro in the buffer.
+ * \li Syntax: math-macro-append-greedy-param
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_APPEND_GREEDY_PARAM, "math-macro-append-greedy-param", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_REMOVE_GREEDY_PARAM
+ * \li Action: Remove a greedy parameter.
+ * \li Notion: Remove a greedy parameter of a Math Macro and spit
+ out the values of it in every instance of the macro
+ in the buffer. If it is an optional parameter the [valud]
+ format is used.
+ * \li Syntax: math-macro-remove-greedy-param
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_REMOVE_GREEDY_PARAM, "math-macro-remove-greedy-param", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_MAKE_OPTIONAL
+ * \li Action: Make a parameter optional.
+ * \li Notion: Turn the first non-optional parameter of a Math Macro
+ into an optional parameter with a default value.
+ * \li Syntax: math-macro-make-optional
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_MAKE_OPTIONAL, "math-macro-make-optional", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_MAKE_NONOPTIONAL
+ * \li Action: Make a parameter non-optional.
+ * \li Notion: Turn the last optional parameter of a Math Macro
+ into a non-optional parameter. The default value is
+ remembered to be reused later if the user changes his mind.
+ * \li Syntax: math-macro-make-nonoptional
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_MAKE_NONOPTIONAL, "math-macro-make-nonoptional", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_ADD_OPTIONAL_PARAM
+ * \li Action: Add an optional parameter.
+ * \li Notion: Insert an optional parameter just behind the
+ already existing optional parameters.
+ * \li Syntax: math-macro-add-optional-param
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_ADD_OPTIONAL_PARAM, "math-macro-add-optional-param", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_REMOVE_OPTIONAL_PARAM
+ * \li Action: Remove the last optional parameter.
+ * \li Notion: Remove the last optional parameter of a Math Macro and
+ remove it in all the instances of the macro in the buffer.
+ * \li Syntax: math-macro-remove-optional-param
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_REMOVE_OPTIONAL_PARAM, "math-macro-remove-optional-param", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_MATH_MACRO_ADD_GREEDY_OPTIONAL_PARAM
+ * \li Action: Add a greedy optional parameter.
+ * \li Notion: Add a greedy optional parameter which eats the value
+ from the following cells in mathed which are in the [value]
+ format.
+ * \li Syntax: math-macro-add-greedy-optional-param
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_MATH_MACRO_ADD_GREEDY_OPTIONAL_PARAM, "math-macro-add-greedy-optional-param", Noop, Math },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_IN_MATHMACROTEMPLATE
+ * \li Action: Only active in Math Macro definition.
+ * \li Notion: Dummy function which is only active in a Math Macro definition.
+ It's used to toggle the Math Macro toolbar if the cursor moves
+ into a Math Macro definition.
+ * \li Syntax: in-mathmacrotemplate
+ * \li Origin: sts, 06 January 2008
+ * \endvar
+ */
+ { LFUN_IN_MATHMACROTEMPLATE, "in-mathmacrotemplate", Noop, Math },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PARAGRAPH_MOVE_DOWN
+ * \li Action: Moves the current paragraph downwards in the document.
+ * \li Syntax: paragraph-move-down
+ * \li Origin: Edwin, 8 Apr 2006
+ * \endvar
+ */
+ { LFUN_PARAGRAPH_MOVE_DOWN, "paragraph-move-down", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PARAGRAPH_MOVE_UP
+ * \li Action: Moves the current paragraph upwards in the document.
+ * \li Syntax: paragraph-move-up
+ * \li Origin: Edwin, 8 Apr 2006
+ * \endvar
+ */
+ { LFUN_PARAGRAPH_MOVE_UP, "paragraph-move-up", Noop, Edit },
+
+ { LFUN_PARAGRAPH_SPACING, "paragraph-spacing", Noop, Edit },
+ { LFUN_PARAGRAPH_UP, "paragraph-up", ReadOnly | NoUpdate, Edit },
+ { LFUN_PARAGRAPH_UP_SELECT, "paragraph-up-select", ReadOnly, Edit },
+ { LFUN_PARAGRAPH_DOWN, "paragraph-down", ReadOnly | NoUpdate, Edit },
+ { LFUN_PARAGRAPH_DOWN_SELECT, "paragraph-down-select", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PARAGRAPH_GOTO
+ * \li Action: Jump to a paragraph given by its id number.
+ * \li Notion: Note that id number of paragraph is not the sequential number of paragraph
+ seen on the screen. Moreover the id is unique for all opened buffers (documents).
+ * \li Syntax: paragraph-goto <PAR_ID_NUMBER>
+ * \li Origin: Dekel, 26 Aug 2000
+ * \endvar
+ */
+ { LFUN_PARAGRAPH_GOTO, "paragraph-goto", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BREAK_PARAGRAPH
+ * \li Action: Breaks the current paragraph at the current location.
+ * \li Syntax: break-paragraph
+ * \endvar
+ */
+ { LFUN_BREAK_PARAGRAPH, "break-paragraph", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BREAK_PARAGRAPH_SKIP
+ * \li Action: Breaks the current paragraph at the current location,
+ unless used at the beginning of a line, where it sets
+ the label width string to empty.
+ * \li Syntax: break-paragraph-skip
+ * \endvar
+ */
+ { LFUN_BREAK_PARAGRAPH_SKIP, "break-paragraph-skip", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PARAGRAPH_PARAMS
+ * \li Action: Change paragraph settings.
+ * \li Notion: Modifies the current paragraph, or currently selected paragraphs.
+ This function only modifies, and does not override, existing settings.
+ Note that the "leftindent" indent setting is deprecated.
+ * \li Syntax: paragraph-params [<INDENT>] [<SPACING>] [<ALIGN>] [<OTHERS>]
+ * \li Params: <INDENT>: \\noindent|\\indent|\\indent-toggle|\\leftindent LENGTH\n
+ <SPACING>: \\paragraph_spacing default|single|onehalf|double|other\n
+ <ALIGN>: \\align block|left|right|center|default\n
+ <OTHERS>: \\labelwidthstring WIDTH|\\start_of_appendix\n
+ * \li Origin: rgh, Aug 15 2007
+ * \endvar
+ */
+ { LFUN_PARAGRAPH_PARAMS, "paragraph-params", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PARAGRAPH_PARAMS_APPLY
+ * \li Action: Change paragraph settings.
+ * \li Notion: Overwrite all nonspecified settings to the default ones.
+ Use paragraph-params lfun if you don't want to overwrite others settings.
+ * \li Syntax: paragraph-params-apply <INDENT> <SPACING> <ALIGN> <OTHERS>
+ * \li Params: For parameters see #LFUN_PARAGRAPH_PARAMS
+ * \li Origin: leeming, 30 Mar 2004
+ * \endvar
+ */
+ { LFUN_PARAGRAPH_PARAMS_APPLY, "paragraph-params-apply", Noop, Edit },
+ { LFUN_PARAGRAPH_UPDATE, "", Noop, Hidden },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_OUTLINE_UP
+ * \li Action: Move the current group in the upward direction in the
+ structure of the document.
+ * \li Notion: The "group" can be Part/Chapter/Section/etc. It moves
+ the whole substructure of the group.
+ * \li Syntax: outline-up
+ * \li Origin: Vermeer, 23 Mar 2006
+ * \endvar
+ */
+ { LFUN_OUTLINE_UP, "outline-up", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_OUTLINE_DOWN
+ * \li Action: Move the current group in the downward direction in the
+ structure of the document.
+ * \li Notion: The "group" can be Part/Chapter/Section/etc. It moves
+ the whole substructure of the group.
+ * \li Syntax: outline-down
+ * \li Origin: Vermeer, 23 Mar 2006
+ * \endvar
+ */
+ { LFUN_OUTLINE_DOWN, "outline-down", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_OUTLINE_IN
+ * \li Action: Moves the current group in the downward direction in the
+ hierarchy of the document structure.
+ * \li Notion: Part -> Chapter -> Section -> etc.
+ * \li Syntax: outline-in
+ * \li Origin: Vermeer, 23 Mar 2006
+ * \endvar
+ */
+ { LFUN_OUTLINE_IN, "outline-in", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_OUTLINE_OUT
+ * \li Action: Moves the current group in the upward direction in the
+ hierarchy of the document structure.
+ * \li Notion: Part <- Chapter <- Section <- etc.
+ * \li Syntax: outline-out
+ * \li Origin: Vermeer, 23 Mar 2006
+ * \endvar
+ */
+ { LFUN_OUTLINE_OUT, "outline-out", Noop, Edit },
+
+ { LFUN_EXTERNAL_EDIT, "external-edit", Noop, Edit },
+ { LFUN_GRAPHICS_EDIT, "graphics-edit", Noop, Edit },
+
+ { LFUN_CELL_BACKWARD, "cell-backward", Noop, Edit },
+ { LFUN_CELL_FORWARD, "cell-forward", Noop, Edit },
+ { LFUN_CELL_SPLIT, "cell-split", Noop, Edit },
+ { LFUN_TABULAR_INSERT, "tabular-insert", Noop, Edit },
+ { LFUN_TABULAR_FEATURE, "tabular-feature", Noop, Edit },
+
+ { LFUN_VC_CHECK_IN, "vc-check-in", ReadOnly, System },
+ { LFUN_VC_CHECK_OUT, "vc-check-out", ReadOnly, System },
+ { LFUN_VC_REGISTER, "vc-register", ReadOnly, System },
+ { LFUN_VC_REVERT, "vc-revert", ReadOnly, System },
+ { LFUN_VC_UNDO_LAST, "vc-undo-last", ReadOnly, System },
+
+ { LFUN_CHANGES_TRACK, "changes-track", Noop, Edit },
+ { LFUN_CHANGES_OUTPUT, "changes-output", Noop, Edit },
+ { LFUN_CHANGE_NEXT, "change-next", ReadOnly, Edit },
+ { LFUN_CHANGES_MERGE, "changes-merge", Noop, Edit },
+ { LFUN_CHANGE_ACCEPT, "change-accept", Noop, Edit },
+ { LFUN_CHANGE_REJECT, "change-reject", Noop, Edit },
+ { LFUN_ALL_CHANGES_ACCEPT, "all-changes-accept", Noop, Edit },
+ { LFUN_ALL_CHANGES_REJECT, "all-changes-reject", Noop, Edit },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_INSET_APPLY
+ * \li Action: Apply data for an inset.
+ * \li Notion: LFUN_INSET_APPLY is sent from the dialogs when the data should
+ be applied. This is either changed to #LFUN_INSET_MODIFY or
+ #LFUN_INSET_INSERT depending on the context where it is called.
+ * \li Syntax: inset-apply <ARGS>
+ * \li Params: See #LFUN_INSET_INSERT .
+ * \endvar
+ */
+ { LFUN_INSET_APPLY, "inset-apply", Noop, Edit },
+ { LFUN_INSET_DISSOLVE, "inset-dissolve", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_INSET_INSERT
+ * \li Action: Insert new inset (type given by the parameters).
+ * \li Syntax: inset-insert <INSET> <ARGS>
+ * \li Params: <INSET>: <bibitem|bibtex|cite|ert|listings|external|graphics|
+ hyperlink|include|index|label|nomencl|vspace|ref|toc>\n
+ <ARGS>: depends on the given inset. Use "lyx -dbg action" to
+ explore.
+ * \li Sample: inset-insert ref LatexCommand <Format> reference "<label name>"\end_inset \n
+ where <label name> is the name of the referenced label and
+ <Format> is one of the following: \n
+ ref -- <reference> \n
+ eqref -- (<reference>) \n
+ pageref -- <page> \n
+ vpageref -- on <page> \n
+ vref -- <reference> on <page> \n
+ prettyref -- Formatted reference
+ * \endvar
+ */
+ { LFUN_INSET_INSERT, "inset-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_INSET_MODIFY
+ * \li Action: Modify existing inset.
+ * \li Notion: Used for label, floats, listings, box, branch, external, wrap
+ bibtex, ert, command, grahocs, note, vspace, tabular, bibitem,
+ inlude, ref insets.
+ * \li Syntax: inset-modify <INSET> <ARGS>
+ * \li Params: See #LFUN_INSET_INSERT for further details.
+ * \endvar
+ */
+ { LFUN_INSET_MODIFY, "", Noop, Hidden },
+ { LFUN_INSET_DIALOG_UPDATE, "", Noop, Hidden },
+ { LFUN_INSET_SETTINGS, "inset-settings", ReadOnly, Edit },
+ { LFUN_NEXT_INSET_TOGGLE, "next-inset-toggle", ReadOnly, Edit },
+ { LFUN_INSET_TOGGLE, "", ReadOnly, Hidden },
+ { LFUN_ALL_INSETS_TOGGLE, "all-insets-toggle", ReadOnly, Edit },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FINISHED_FORWARD
+ * \li Action: Moves the cursor out of the current slice, going forward.
+ * \li Notion: Cursor movement within an inset may be different than cursor
+ movement in the surrounding text. This action should be called
+ automatically by the cursor movement within the inset, when
+ movement within the inset has ceased (reached the end of the
+ last paragraph, for example), in order to move correctly
+ back into the surrounding text.
+ * \endvar
+ */
+ { LFUN_FINISHED_FORWARD, "", ReadOnly, Hidden },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FINISHED_BACKWARD
+ * \li Action: Moves the cursor out of the current slice, going backwards.
+ * \li Notion: See also #LFUN_FINISHED_FORWARD.
+ * \endvar
+ */
+ { LFUN_FINISHED_BACKWARD, "", ReadOnly, Hidden },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FINISHED_RIGHT
+ * \li Action: Moves the cursor out of the current slice, going right.
+ * \li Notion: See also #LFUN_FINISHED_FORWARD
+ * \endvar
+ */
+ { LFUN_FINISHED_RIGHT, "", ReadOnly, Hidden },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FINISHED_LEFT
+ * \li Action: Moves the cursor out of the current slice, going left.
+ * \li Notion: See also #LFUN_FINISHED_FORWARD.
+ * \endvar
+ */
+ { LFUN_FINISHED_LEFT, "", ReadOnly, Hidden },
+
+ { LFUN_LANGUAGE, "language", Noop, Edit },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LABEL_GOTO
+ * \li Action: Goto a label.
+ * \li Syntax: label-goto [<LABEL>]
+ * \li Params: <LABEL>: Requested label. If no label is given and refernce
+ is on cursor position, Bookmark 0 is saved and
+ cursor moves to the position of referenced label.
+ * \li Origin: Ale, 6 Aug 1997
+ * \endvar
+ */
+ { LFUN_LABEL_GOTO, "label-goto", ReadOnly, Edit },
+ { LFUN_LABEL_INSERT, "label-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_REFERENCE_NEXT
+ * \li Action: Go to the next label or cross-reference.
+ * \li Syntax: reference-next
+ * \li Origin: Dekel, 14 Jan 2001
+ * \endvar
+ */
+ { LFUN_REFERENCE_NEXT, "reference-next", ReadOnly, Edit },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BOOKMARK_GOTO
+ * \li Action: Goto a bookmark.
+ * \li Notion: Moves the cursor to the numbered bookmark, opening the file
+ if necessary. Note that bookmarsk are saved per-session, not
+ per file.
+ * \li Syntax: bookmark-goto <NUMBER>
+ * \li Params: <NUMBER>: the number of the bookmark to restore.
+ * \li Origin: Dekel, 27 January 2001
+ * \endvar
+ */
+ { LFUN_BOOKMARK_GOTO, "bookmark-goto", NoBuffer, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BOOKMARK_SAVE
+ * \li Action: Save a bookmark.
+ * \li Notion: Saves a numbered bookmark to the sessions file. The number
+ must be between 1 and 9, inclusive. Note that bookmarks are
+ saved per-session, not per file.
+ * \li Syntax: bookmark-save <NUMBER>
+ * \li Params: <NUMBER>: the number of the bookmark to save.
+ * \li Origin: Dekel, 27 January 2001
+ * \endvar
+ */
+ { LFUN_BOOKMARK_SAVE, "bookmark-save", ReadOnly, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BOOKMARK_CLEAR
+ * \li Action: Clears the list of saved bookmarks.
+ * \li Syntax: bookmark-clear
+ * \li Origin: bpeng, 31 October 2006
+ * \endvar
+ */
+ { LFUN_BOOKMARK_CLEAR, "bookmark-clear", NoBuffer, Edit },
+
+ { LFUN_HELP_OPEN, "help-open", NoBuffer | Argument, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LYX_QUIT
+ * \li Action: Terminates the current LyX instance.
+ * \li Notion: Terminates the current LyX instance, asking whether to save
+ modified documents, etc.
+ * \li Syntax: lyx-quit
+ * \endvar
+ */
+ { LFUN_LYX_QUIT, "lyx-quit", NoBuffer, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_TOOLBAR_TOGGLE
+ * \li Action: Toggles visibility of a given toolbar between on/off/auto.
+ * \li Notion: Skiping "auto" when allowauto is false.
+ * \li Syntax: toolbar-toggle <NAME> [allowauto]
+ * \li Params: <NAME>: standard|extra|table|math|mathmacrotemplate|
+ minibuffer|review|view/update|math_panels
+ * \li Origin: Edwin, 21 May 2007
+ * \endvar
+ */
+ { LFUN_TOOLBAR_TOGGLE, "toolbar-toggle", NoBuffer, Buffer },
+ { LFUN_MENU_OPEN, "menu-open", NoBuffer, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_UI_TOGGLE
+ * \li Action: Various UI visibility-toggling actions.
+ * \li Syntax: ui-toggle <statusbar|menubar|frame|fullscreen>
+ * \li Params: statusbar : Toggle visibility of the statusbar.\n
+ menubar : Toggle visibility of the menubar.\n
+ scrollbar : Toggle visibility of the scrollbar.\n
+ frame : Toggle visibility of the frames around editing window.\n
+ fullscreen : Toggle fullscreen mode. This also covers calling the
+ previous functions. However #LFUN_TOOLBAR_TOGGLE for the
+ custom tweaks of the toolbars should be used.
+ * \li Origin: ps, 9 Feb 2007
+ * \endvar
+ */
+ { LFUN_UI_TOGGLE, "ui-toggle", NoBuffer, Buffer },
+
+ { LFUN_WINDOW_NEW, "window-new", NoBuffer, Buffer },
+ { LFUN_WINDOW_CLOSE, "window-close", NoBuffer, Buffer },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_SPLIT_VIEW
+ * \li Action: Creates another split view of current buffer.
+ * \li Notion: All split views act in the same way indpendently.
+ * \li Syntax: split-view <vertical|horizontal>
+ * \li Params: horizontal : The work areas are laid out side by side.\n
+ vertical : The work areas laid out vertically.\n
+ * \li Origin: abdel, 20 Feb 2008
+ * \endvar
+ */
+ { LFUN_SPLIT_VIEW, "split-view", ReadOnly, Buffer },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CLOSE_TAB_GROUP
+ * \li Action: Close the current tab group.
+ * \li Notion: This only closes the work areas, not the buffer themselves.
+ The still opened buffers can be visualized in another tab group.
+ * \li Syntax: close-tab-group
+ * \li Origin: abdel, 21 Feb 2008
+ * \endvar
+ */
+ { LFUN_CLOSE_TAB_GROUP, "close-tab-group", ReadOnly, Buffer },
+ { LFUN_DIALOG_SHOW, "dialog-show", NoBuffer, Edit },
+ { LFUN_DIALOG_SHOW_NEW_INSET, "dialog-show-new-inset", Noop, Edit },
+ { LFUN_DIALOG_UPDATE, "dialog-update", NoBuffer, Edit },
+ { LFUN_DIALOG_HIDE, "dialog-hide", NoBuffer, Edit },
+ { LFUN_DIALOG_TOGGLE, "dialog-toggle", NoBuffer, Edit },
+ { LFUN_DIALOG_DISCONNECT_INSET, "dialog-disconnect-inset", Noop, Edit },
+
+ { LFUN_MOUSE_PRESS, "", ReadOnly, Hidden },
+ { LFUN_MOUSE_MOTION, "", ReadOnly | SingleParUpdate, Hidden },
+ { LFUN_MOUSE_RELEASE, "", ReadOnly, Hidden },
+ { LFUN_MOUSE_DOUBLE, "", ReadOnly, Hidden },
+ { LFUN_MOUSE_TRIPLE, "", ReadOnly, Hidden },
+
+ { LFUN_KEYMAP_OFF, "keymap-off", ReadOnly, Edit },
+ { LFUN_KEYMAP_PRIMARY, "keymap-primary", ReadOnly, Edit },
+ { LFUN_KEYMAP_SECONDARY, "keymap-secondary", ReadOnly, Edit },
+ { LFUN_KEYMAP_TOGGLE, "keymap-toggle", ReadOnly, Edit },
+
+ { LFUN_MESSAGE, "message", NoBuffer, System },
+ { LFUN_FLOAT_LIST, "float-list", Noop, Edit },
+ { LFUN_ESCAPE, "escape", ReadOnly, Edit },
+
+ { LFUN_SERVER_CHAR_AFTER, "server-char-after", ReadOnly, System },
+ { LFUN_SERVER_GET_FONT, "server-get-font", ReadOnly, System },
+ { LFUN_SERVER_GET_LAYOUT, "server-get-layout", ReadOnly, System },
+ { LFUN_SERVER_GET_NAME, "server-get-name", ReadOnly, System },
+ { LFUN_SERVER_GET_XY, "server-get-xy", ReadOnly, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_SERVER_GOTO_FILE_ROW
+ * \li Action: Sets the cursor position based on the row number of generated TeX file.
+ * \li Syntax: server-goto-file-row <LYX_FILE_NAME> <ROW_NUMBER>
+ * \li Origin: Edmar, 23 Dec 1998
+ * \endvar
+ */
+ { LFUN_SERVER_GOTO_FILE_ROW, "server-goto-file-row", ReadOnly, System },
+ { LFUN_SERVER_NOTIFY, "server-notify", ReadOnly, System },
+ { LFUN_SERVER_SET_XY, "server-set-xy", ReadOnly, System },
+
+ { LFUN_BUILD_PROGRAM, "build-program", ReadOnly, Buffer },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_AUTO_SAVE
+ * \li Action: Saves the current buffer to a temporary file.
+ * \li Notion: Saves the current buffer to a file named "#filename#". This LFUN
+ is called automatically by LyX, to "autosave" the current buffer.
+ * \li Syntax: buffer-auto-save
+ * \endvar
+ */
+ { LFUN_BUFFER_AUTO_SAVE, "buffer-auto-save", Noop, Buffer },
+ { LFUN_BUFFER_CHILD_OPEN, "buffer-child-open", ReadOnly, Buffer },
+ { LFUN_BUFFER_CHKTEX, "buffer-chktex", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_TOGGLE_COMPRESSION
+ * \li Action: Toggles compression of the current document on/off.
+ * \li Syntax: buffer-toggle-compression
+ * \li Origin: bpeng, 27 Apr 2006
+ * \endvar
+ */
+ { LFUN_BUFFER_TOGGLE_COMPRESSION, "buffer-toggle-compression", Noop, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_TOGGLE_EMBEDDING
+ * \li Action: Toggles the embeddding feature on/off.
+ * \li Syntax: buffer-toggle-embedding
+ * \li Origin: bpeng, 21 Oct 2007
+ * \endvar
+ */
+ { LFUN_BUFFER_TOGGLE_EMBEDDING, "buffer-toggle-embedding", Noop, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_CLOSE
+ * \li Action: Closes the current buffer.
+ * \li Notion: Closes the current buffer, asking whether to save it, etc,
+ if the buffer has been modified.
+ * \li Syntax: buffer-close
+ * \endvar
+ */
+ { LFUN_BUFFER_CLOSE, "buffer-close", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_EXPORT
+ * \li Action: Exports the current buffer (document) to the given format.
+ * \li Syntax: buffer-export <FORMAT>
+ * \li Params: <FORMAT> is either "custom" or one of the formats which you
+ can find in Tools->Preferences->File formats->Format.
+ Usual format you will enter is "pdf2" (pdflatex),
+ "pdflatex" (plain tex for pdflatex) or "ps" for postscript.\n
+ In case of "custom" you will be asked for a format you
+ want to start from and for the command that you want to
+ apply to this format. Internally the control is then passed
+ to #LFUN_BUFFER_EXPORT_CUSTOM.
+ * \li Origin: Lgb, 29 Jul 1997
+ * \endvar
+ */
+ { LFUN_BUFFER_EXPORT, "buffer-export", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_EXPORT_CUSTOM
+ * \li Action: Exports the current buffer (document) from the given format using
+ the given command on it.
+ * \li Syntax: buffer-export-custom <FORMAT> <COMMAND>
+ * \li Params: <FORMAT> format to start from (LyX will care to produce such
+ intermediate file).\n
+ <COMMAND> this command will be launched on the file. Note that you can
+ use "$$FName" string to qualify the intermediate file.
+ * \li Sample: buffer-export-custom dvi dvips -f $$FName -o myfile.ps
+ * \li Origin: leeming, 27 Mar 2004
+ * \endvar
+ */
+ { LFUN_BUFFER_EXPORT_CUSTOM, "buffer-export-custom", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_PRINT
+ * \li Action: Prints the current document.
+ * \li Notion: Many settings can be given via the preferences dialog.
+ * \li Syntax: buffer-print <TARGET> <TARGET-NAME> <COMMAND>
+ * \li Params: <TARGET> is either "printer" or "file".\n
+ <TARGER-NAME> is either "default" or file name or printer name.\n
+ <COMMAND> command ensuring the printing job.
+ * \li Sample: buffer-print file "/trash/newfile1.ps" "dvips"
+ * \li Origin: leeming, 28 Mar 2004
+ * \endvar
+ */
+ { LFUN_BUFFER_PRINT, "buffer-print", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_IMPORT
+ * \li Action: Import a given file as a lyx document.
+ * \li Notion: File can be imported iff lyx file format is (transitively) reachable via
+ defined convertors in preferences. Look into File->Import menu to get
+ an idea of the currently active import formats.
+ * \li Syntax: buffer-import <FORMAT> [<FILE>]
+ * \li Origin: Asger, 24 Jul 1998
+ * \endvar
+ */
+ { LFUN_BUFFER_IMPORT, "buffer-import", NoBuffer, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_NEW
+ * \li Action: Creates a new buffer (that is, document).
+ * \li Notion: Implicit path can be set in Preferences dialog.
+ * \li Syntax: buffer-new [<FILE>]
+ * \li Params: <FILE>: filename of created file with absolute path.
+ * \endvar
+ */
+ { LFUN_BUFFER_NEW, "buffer-new", NoBuffer, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_NEW_TEMPLATE
+ * \li Action: Creates a new buffer (that is, document) from a template.
+ * \li Notion: Path for new files and templates can be set in Preferences dialog.
+ Template will be asked for via Open-dialog.
+ * \li Syntax: buffer-new-template [<FILE>]
+ * \li Params: <FILE>: filename of created file with absolute path.
+ * \endvar
+ */
+ { LFUN_BUFFER_NEW_TEMPLATE,"buffer-new-template", NoBuffer, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_RELOAD
+ * \li Action: Reverts opened document.
+ * \li Syntax: buffer-reload
+ * \li Origin: Asger, 2 Feb 1997
+ * \endvar
+ */
+ { LFUN_BUFFER_RELOAD, "buffer-reload", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_SWITCH
+ * \li Action: Switch to the given buffer.
+ * \li Notion: This is useful also in case you need simultaneously more views of the edited
+ document in different LyX windows.
+ * \li Syntax: buffer-new-template <BUFFER>
+ * \li Params: <BUFFER>: already opened document which is to be shown.
+ * \endvar
+ */
+ { LFUN_BUFFER_SWITCH, "buffer-switch", NoBuffer | ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_TOGGLE_READ_ONLY
+ * \li Action: Toggle editing mode of the current document between read/write and read-only.
+ * \li Syntax: buffer-toggle-read-only
+ * \li Origin: Lgb, 27 May 1997
+ * \endvar
+ */
+ { LFUN_BUFFER_TOGGLE_READ_ONLY, "buffer-toggle-read-only", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_VIEW
+ * \li Action: Displays current buffer in chosen format.
+ * \li Notion: Displays the contents of the current buffer in the chosen
+ format, for example, PDF or DVI. This runs the necessary
+ converter, calls the defined viewer, and so forth.
+ * \li Syntax: buffer-view <FORMAT>
+ * \li Params: <FORMAT>: The format to display, where this is one of the
+ formats defined (in the current GUI) in the
+ Tools>Preferences>File Formats dialog.
+ * \endvar
+ */
+ { LFUN_BUFFER_VIEW, "buffer-view", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_UPDATE
+ * \li Action: Exports the current document and put the result into the
+ temporary directory.
+ * \li Notion: In case you are already viewing the exported document (see #LFUN_BUFFER_VIEW)
+ the output will be rewriten - updated. This is useful in case your viewer
+ is able to detect such changes (e.g. ghostview for postscript).
+ * \li Syntax: buffer-update <FORMAT>
+ * \li Params: <FORMAT>: The format to display, where this is one of the
+ formats defined (in the current GUI) in the
+ Tools>Preferences>File Formats dialog.
+ * \li Origin: Dekel, 5 Aug 2000
+ * \endvar
+ */
+ { LFUN_BUFFER_UPDATE, "buffer-update", ReadOnly, Buffer },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_WRITE
+ * \li Action: Saves the current buffer.
+ * \li Notion: Saves the current buffer to disk, using the filename that
+ is already associated with the buffer, asking for one if
+ none is yet assigned.
+ * \li Syntax: buffer-write
+ * \endvar
+ */
+ { LFUN_BUFFER_WRITE, "buffer-write", ReadOnly, Buffer },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_BUFFER_WRITE_AS
+ * \li Action: Rename and save current buffer.
+ * \li Syntax: buffer-write-as <FILENAME>
+ * \li Params: <FILENAME>: New name of the buffer/file. A relative path
+ is with respect to the original location of the buffer/file.
+ * \endvar
+ */
+ { LFUN_BUFFER_WRITE_AS, "buffer-write-as", ReadOnly, Buffer },
+ { LFUN_BUFFER_WRITE_ALL, "buffer-write-all", ReadOnly, Buffer },
+ { LFUN_BUFFER_NEXT, "buffer-next", ReadOnly, Buffer },
+ { LFUN_BUFFER_PREVIOUS, "buffer-previous", ReadOnly, Buffer },
+ { LFUN_MASTER_BUFFER_UPDATE, "master-buffer-update", ReadOnly, Buffer },
+ { LFUN_MASTER_BUFFER_VIEW, "master-buffer-view", ReadOnly, Buffer },
+ { LFUN_BUFFER_LANGUAGE, "buffer-language", Noop, Buffer },
+ { LFUN_BUFFER_SAVE_AS_DEFAULT, "buffer-save-as-default", Noop, Buffer },
+ { LFUN_BUFFER_PARAMS_APPLY, "buffer-params-apply", Noop, Buffer },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FILE_INSERT
+ * \li Action: Inserts another LyX file.
+ * \li Syntax: file-insert [<FILE>]
+ * \li Params: <FILE>: Filename to be inserted.
+ * \endvar
+ */
+ { LFUN_FILE_INSERT, "file-insert", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FILE_INSERT_PLAINTEXT
+ * \li Action: Inserts plain text file.
+ * \li Syntax: file-insert-plaintext [<FILE>]
+ * \li Params: <FILE>: Filename to be inserted.
+ * \li Origin: CFO-G, 19 Nov 1997
+ * \endvar
+ */
+ { LFUN_FILE_INSERT_PLAINTEXT, "file-insert-plaintext", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FILE_INSERT_PLAINTEXT_PARA
+ * \li Action: Inserts plain text file as paragraph (i.e. join lines).
+ * \li Syntax: file-insert-plaintext-para [<FILE>]
+ * \li Params: <FILE>: Filename to be inserted.
+ * \li Origin: Levon, 14 Feb 2001
+ * \endvar
+ */
+ { LFUN_FILE_INSERT_PLAINTEXT_PARA, "file-insert-plaintext-para", Noop, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_FILE_OPEN
+ * \li Action: Open LyX document.
+ * \li Syntax: file-open [<FILE>]
+ * \li Params: <FILE>: Filename to be opened.
+ * \endvar
+ */
+ { LFUN_FILE_OPEN, "file-open", NoBuffer, Buffer },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CALL
+ * \li Action: Executes a command defined in a .def file.
+ * \li Notion: The definitions are by default read from lib/commands/default.def.\n
+ A .def file allows to define a command with \\define "<NAME>" "<LFUN>"
+ where <NAME> is the name of the new command and <LFUN> is the lfun code
+ to be executed (see e.g. #LFUN_COMMAND_SEQUENCE).
+ \\def_file "FileName" allows to include another .def file. \n
+ This is particularly useful in connection with toolbar buttons:
+ Since the name of the button image for this lfun is
+ lib/images/commands/<NAME>.png this is the way to assign an image
+ to a complex command-sequence.
+ * \li Syntax: call <NAME>
+ * \li Params: <NAME>: Name of the command that must be called.
+ * \li Origin: broider, 2 Oct 2007
+ * \endvar
+ */
+ { LFUN_CALL, "call", NoBuffer, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_META_PREFIX
+ * \li Action: Simulate halting Meta key (Alt key on PCs).
+ * \li Notion: Used for buffer editation not for GUI control.
+ * \li Syntax: meta-prefix
+ * \endvar
+ */
+ { LFUN_META_PREFIX, "meta-prefix", NoBuffer, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CANCEL
+ * \li Action: Cancels sequence prepared by #LFUN_META_PREFIX .
+ * \li Syntax: cancel
+ * \endvar
+ */
+ { LFUN_CANCEL, "cancel", NoBuffer, System },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_COMMAND_EXECUTE
+ * \li Action: Opens the minibuffer toolbar so that the user can type in there.
+ * \li Notion: Usually bound to M-x shortcut.
+ * \li Syntax: command-execute
+ * \endvar
+ */
+ { LFUN_COMMAND_EXECUTE, "command-execute", NoBuffer, Edit },
+ { LFUN_COMMAND_PREFIX, "command-prefix", NoBuffer, Hidden },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_COMMAND_SEQUENCE
+ * \li Action: Run more commands (LFUN and its parameters) in a sequence.
+ * \li Syntax: command-sequence <CMDS>
+ * \li Params: <CMDS>: Sequence of commands separated by semicolons.
+ * \li Sample: command-sequence cut; ert-insert; self-insert \; paste; self-insert {}; inset-toggle;
+ * \li Origin: Andre', 11 Nov 1999
+ * \endvar
+ */
+ { LFUN_COMMAND_SEQUENCE, "command-sequence", NoBuffer, System },
+
+/*!
+ * \var lyx::FuncCode lyx::LFUN_PREFERENCES_SAVE
+ * \li Action: Save user preferences.
+ * \li Syntax: preferences-save
+ * \li Origin: Lgb, 27 Nov 1999
+ * \endvar
+ */
+ { LFUN_PREFERENCES_SAVE, "preferences-save", NoBuffer, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_RECONFIGURE
+ * \li Action: Reconfigure the automatic settings.
+ * \li Syntax: reconfigure
+ * \li Origin: Asger, 14 Feb 1997
+ * \endvar
+ */
+ { LFUN_RECONFIGURE, "reconfigure", NoBuffer, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_LYXRC_APPLY
+ * \li Action: Apply the given settings to user preferences.
+ * \li Syntax: lyxrc-apply <SETTINGS>
+ * \li Params: <SETTINGS>: settings which are to be set. Take a look into ~/.lyx/preferences
+ to get an idea which commands to use and their syntax.
+ #lyx::LyXRC::LyXRCTags has the list of possible commands.
+ * \endvar
+ */
+ { LFUN_LYXRC_APPLY, "lyxrc-apply", NoBuffer, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_CURSOR_FOLLOWS_SCROLLBAR_TOGGLE
+ * \li Action: Determine whether keep cursor inside the editing window regardless
+ the scrollbar movement.
+ * \li Syntax: toggle-cursor-follows-scrollbar
+ * \li Origin: ARRae, 2 Dec 1997
+ * \endvar
+ */
+ { LFUN_CURSOR_FOLLOWS_SCROLLBAR_TOGGLE, "cursor-follows-scrollbar-toggle", ReadOnly, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_SET_COLOR
+ * \li Action: Set the given LyX color to the color defined by the X11 name given.
+ * \li Notion: A new color entry is created if the color is unknown.
+ Color names can be stored as a part of user settings.
+ * \li Syntax: set-color <LYX_NAME> <X11_NAME>
+ * \li Origin: SLior, 11 Jun 2000
+ * \endvar
+ */
+ { LFUN_SET_COLOR, "set-color", ReadOnly | NoBuffer, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_STATISTICS
+ * \li Action: Count the statistics (number of words and characters)
+ in the document or in the given selection.
+ * \li Notion: Note that this function gives the number of words/chars written,
+ not the number of characters which will be typeset.
+ * \li Syntax: statistics
+ * \li Origin: lasgouttes, Jan 27 2004; ps, Jan 8 2008
+ * \endvar
+ */
+ { LFUN_STATISTICS, "statistics", ReadOnly, System },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_COMPLETION_INLINE
+ * \li Action: Show the inline completion at the cursor position.
+ * \li Syntax: completion-inline
+ * \li Origin: sts, Feb 19 2008
+ * \endvar
+ */
+ { LFUN_COMPLETION_INLINE, "completion-inline", ReadOnly | NoUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_COMPLETION_POPUP
+ * \li Action: Show the completion popup at the cursor position.
+ * \li Syntax: completion-popup
+ * \li Origin: sts, Feb 19 2008
+ * \endvar
+ */
+ { LFUN_COMPLETION_POPUP, "completion-popup", ReadOnly | NoUpdate, Edit },
+/*!
+ * \var lyx::FuncCode lyx::LFUN_COMPLETION_COMPLETE
+ * \li Action: Try to complete the word or command at the cursor position.
+ * \li Syntax: completion-complete
+ * \li Origin: sts, Feb 19 2008
+ * \endvar
+ */
+ { LFUN_COMPLETION_COMPLETE, "complete", SingleParUpdate, Edit },
+
+ { LFUN_NOACTION, "", Noop, Hidden }
+#ifndef DOXYGEN_SHOULD_SKIP_THIS
};
for (int i = 0; items[i].action != LFUN_NOACTION; ++i) {
- newFunc(items[i].action, items[i].name, items[i].attrib);
+ newFunc(items[i].action, items[i].name, items[i].attrib, items[i].type);
}
init = true;
}
-
+#endif
LyXAction::LyXAction()
{
}
-string const LyXAction::getActionName(kb_action action) const
+string const LyXAction::getActionName(FuncCode action) const
{
info_map::const_iterator const it = lyx_info_map.find(action);
return it != lyx_info_map.end() ? it->second.name : string();
}
-bool LyXAction::funcHasFlag(kb_action action,
+LyXAction::func_type const LyXAction::getActionType(FuncCode action) const
+{
+ info_map::const_iterator const it = lyx_info_map.find(action);
+ return it != lyx_info_map.end() ? it->second.type : Hidden;
+}
+
+
+bool LyXAction::funcHasFlag(FuncCode action,
LyXAction::func_attrib flag) const
{
info_map::const_iterator ici = lyx_info_map.find(action);
if (ici == lyx_info_map.end()) {
- lyxerr << "action: " << action << " is not known." << endl;
+ LYXERR0("action: " << action << " is not known.");
BOOST_ASSERT(false);
}
}
-ostream & operator<<(ostream & o, kb_action action)
-{
- return o << int(action);
-}
-
-
} // namespace lyx