-/* \file CutAndPaste.C
+/*
+ * \file CutAndPaste.C
* This file is part of LyX, the document processor.
* Licence details can be found in the file COPYING.
*
- * \author Juergen Vigna
+ * \author Jürgen Vigna
* \author Lars Gullik Bjønnes
* \author Alfredo Braunstein
*
- * Full author contact details are available in file CREDITS
+ * Full author contact details are available in file CREDITS.
*/
#include <config.h>
#include "CutAndPaste.h"
-#include "BufferView.h"
+
#include "buffer.h"
+#include "buffer_funcs.h"
+#include "bufferparams.h"
+#include "BufferView.h"
+#include "cursor.h"
#include "errorlist.h"
-#include "paragraph.h"
-#include "ParagraphParameters.h"
+#include "gettext.h"
#include "lyxtext.h"
-#include "lyxcursor.h"
-#include "iterators.h"
#include "lyxtextclasslist.h"
-#include "undo_funcs.h"
-#include "gettext.h"
+#include "paragraph.h"
#include "paragraph_funcs.h"
-#include "debug.h"
-#include "insets/insetinclude.h"
+#include "ParagraphParameters.h"
+#include "ParagraphList_fwd.h"
+#include "pariterator.h"
+#include "undo.h"
+
#include "insets/insettabular.h"
-#include "support/LAssert.h"
#include "support/lstrings.h"
-#include "support/limited_stack.h"
-using std::endl;
-using std::pair;
-using std::make_pair;
-using std::for_each;
-using std::vector;
+#include <boost/tuple/tuple.hpp>
-using namespace lyx::support;
using lyx::pos_type;
+using lyx::par_type;
using lyx::textclass_type;
+using lyx::support::bformat;
+
+using std::for_each;
+using std::make_pair;
+using std::pair;
+using std::vector;
+using std::string;
-typedef limited_stack<pair<ParagraphList, textclass_type> > CutStack;
namespace {
+typedef std::pair<lyx::par_type, int> PitPosPair;
+
+typedef limited_stack<pair<ParagraphList, textclass_type> > CutStack;
+
CutStack cuts(10);
+struct resetOwnerAndChanges : public std::unary_function<Paragraph, void> {
+ void operator()(Paragraph & p) const {
+ p.cleanChanges();
+ p.setInsetOwner(0);
+ }
+};
+
} // namespace anon
-std::vector<string>
-CutAndPaste::availableSelections(Buffer const & buffer)
+namespace lyx {
+namespace cap {
+
+
+int SwitchLayoutsBetweenClasses(textclass_type c1, textclass_type c2,
+ ParagraphList & pars, ErrorList & errorlist)
+{
+ BOOST_ASSERT(!pars.empty());
+ int ret = 0;
+ if (c1 == c2)
+ return ret;
+
+ LyXTextClass const & tclass1 = textclasslist[c1];
+ LyXTextClass const & tclass2 = textclasslist[c2];
+
+ InsetText in;
+ std::swap(in.paragraphs(), pars);
+
+ ParIterator end = ParIterator(DocumentIterator());
+ for (ParIterator it = ParIterator(in, 0); it != end; ++it) {
+ string const name = it->layout()->name();
+ bool hasLayout = tclass2.hasLayout(name);
+
+ if (hasLayout)
+ it->layout(tclass2[name]);
+ else
+ it->layout(tclass2.defaultLayout());
+
+ if (!hasLayout && name != tclass1.defaultLayoutName()) {
+ ++ret;
+ string const s = bformat(
+ _("Layout had to be changed from\n%1$s to %2$s\n"
+ "because of class conversion from\n%3$s to %4$s"),
+ name, it->layout()->name(), tclass1.name(), tclass2.name());
+ // To warn the user that something had to be done.
+ errorlist.push_back(ErrorItem("Changed Layout", s,
+ it->id(), 0,
+ it->size()));
+ }
+ }
+ std::swap(in.paragraphs(), pars);
+ return ret;
+}
+
+
+std::vector<string> const availableSelections(Buffer const & buffer)
{
vector<string> selList;
ParagraphList::const_iterator pit = pars.begin();
ParagraphList::const_iterator pend = pars.end();
for (; pit != pend; ++pit) {
- asciiSel += pit->asString(&buffer, false);
+ asciiSel += pit->asString(buffer, false);
if (asciiSel.size() > 25) {
asciiSel.replace(22, string::npos, "...");
break;
}
-PitPosPair CutAndPaste::cutSelection(BufferParams const & params,
- ParagraphList & pars,
- ParagraphList::iterator startpit,
- ParagraphList::iterator endpit,
- int startpos, int endpos,
- textclass_type tc, bool doclear)
-{
- copySelection(startpit, endpit, startpos, endpos, tc);
- return eraseSelection(params, pars, startpit, endpit, startpos,
- endpos, doclear);
-}
-
-
-PitPosPair CutAndPaste::eraseSelection(BufferParams const & params,
- ParagraphList & pars,
- ParagraphList::iterator startpit,
- ParagraphList::iterator endpit,
- int startpos, int endpos, bool doclear)
+PitPosPair eraseSelection(BufferParams const & params, ParagraphList & pars,
+ par_type startpit, par_type endpit,
+ int startpos, int endpos, bool doclear)
{
- if (startpit == pars.end() || (startpos > startpit->size()))
+ if (startpit == par_type(pars.size()) ||
+ (startpos > pars[startpit].size()))
return PitPosPair(endpit, endpos);
- if (endpit == pars.end() || startpit == endpit) {
- endpos -= startpit->erase(startpos, endpos);
+ if (endpit == par_type(pars.size()) ||
+ startpit == endpit) {
+ endpos -= pars[startpit].erase(startpos, endpos);
return PitPosPair(endpit, endpos);
}
// clear end/begin fragments of the first/last par in selection
bool all_erased = true;
- startpit->erase(startpos, startpit->size());
- if (startpit->size() != startpos)
+ pars[startpit].erase(startpos, pars[startpit].size());
+ if (pars[startpit].size() != startpos)
all_erased = false;
- endpos -= endpit->erase(0, endpos);
+ endpos -= pars[endpit].erase(0, endpos);
if (endpos != 0)
all_erased = false;
// Loop through the deleted pars if any, erasing as needed
-
- ParagraphList::iterator pit = boost::next(startpit);
-
- while (pit != endpit && pit != pars.end()) {
- ParagraphList::iterator const next = boost::next(pit);
+ for (par_type pit = startpit + 1; pit != endpit;) {
// "erase" the contents of the par
- pit->erase(0, pit->size());
- if (!pit->size()) {
+ pars[pit].erase(0, pars[pit].size());
+ if (!pars[pit].size()) {
// remove the par if it's now empty
- pars.erase(pit);
- } else
+ pars.erase(pars.begin() + pit);
+ --endpit;
+ } else {
+ ++pit;
all_erased = false;
- pit = next;
+ }
}
#if 0 // FIXME: why for cut but not copy ?
}
#endif
- if (boost::next(startpit) == pars.end())
+ if (startpit + 1 == par_type(pars.size()))
return PitPosPair(endpit, endpos);
if (doclear) {
- boost::next(startpit)->stripLeadingSpaces();
+ pars[startpit + 1].stripLeadingSpaces();
}
// paste the paragraphs again, if possible
if (all_erased &&
- (startpit->hasSameLayout(*boost::next(startpit)) ||
- boost::next(startpit)->empty())) {
+ (pars[startpit].hasSameLayout(pars[startpit + 1]) ||
+ pars[startpit + 1].empty())) {
mergeParagraph(params, pars, startpit);
// this because endpar gets deleted here!
endpit = startpit;
}
-namespace {
-
-struct resetOwnerAndChanges {
- void operator()(Paragraph & p) {
- p.cleanChanges();
- p.setInsetOwner(0);
- }
-};
-
-} // anon namespace
-
-bool CutAndPaste::copySelection(ParagraphList::iterator startpit,
- ParagraphList::iterator endpit,
- int start, int end, textclass_type tc)
+bool copySelection(ParagraphList & pars,
+ par_type startpit, par_type endpit,
+ int start, int end, textclass_type tc)
{
- Assert(0 <= start && start <= startpit->size());
- Assert(0 <= end && end <= endpit->size());
- Assert(startpit != endpit || start <= end);
-
- ParagraphList paragraphs;
+ BOOST_ASSERT(0 <= start && start <= pars[startpit].size());
+ BOOST_ASSERT(0 <= end && end <= pars[endpit].size());
+ BOOST_ASSERT(startpit != endpit || start <= end);
// Clone the paragraphs within the selection.
- ParagraphList::iterator postend = boost::next(endpit);
-
- paragraphs.assign(startpit, postend);
+ ParagraphList paragraphs(pars.begin() + startpit, pars.begin() + endpit + 1);
for_each(paragraphs.begin(), paragraphs.end(), resetOwnerAndChanges());
// Cut out the end of the last paragraph.
}
-pair<PitPosPair, ParagraphList::iterator>
-CutAndPaste::pasteSelection(Buffer const & buffer,
- ParagraphList & pars,
- ParagraphList::iterator pit, int pos,
- textclass_type tc,
- ErrorList & errorlist)
+PitPosPair cutSelection(BufferParams const & params, ParagraphList & pars,
+ par_type startpit, par_type endpit,
+ int startpos, int endpos, textclass_type tc, bool doclear)
{
- return pasteSelection(buffer, pars, pit, pos, tc, 0, errorlist);
+ copySelection(pars, startpit, endpit, startpos, endpos, tc);
+ return eraseSelection(params, pars, startpit, endpit, startpos,
+ endpos, doclear);
}
-pair<PitPosPair, ParagraphList::iterator>
-CutAndPaste::pasteSelection(Buffer const & buffer,
- ParagraphList & pars,
- ParagraphList::iterator pit, int pos,
- textclass_type tc, size_t cut_index,
- ErrorList & errorlist)
+pair<PitPosPair, par_type>
+pasteSelection(Buffer const & buffer, ParagraphList & pars,
+ par_type pit, int pos,
+ textclass_type tc, size_t cut_index, ErrorList & errorlist)
{
if (!checkPastePossible())
return make_pair(PitPosPair(pit, pos), pit);
- Assert (pos <= pit->size());
+ BOOST_ASSERT (pos <= pars[pit].size());
// Make a copy of the CaP paragraphs.
- ParagraphList simple_cut_clone = cuts[cut_index].first;
+ ParagraphList insertion = cuts[cut_index].first;
textclass_type const textclass = cuts[cut_index].second;
// Now remove all out of the pars which is NOT allowed in the
// new environment and set also another font if that is required.
// Make sure there is no class difference.
- SwitchLayoutsBetweenClasses(textclass, tc, simple_cut_clone,
+ SwitchLayoutsBetweenClasses(textclass, tc, insertion,
errorlist);
- ParagraphList::iterator tmpbuf = simple_cut_clone.begin();
- int depth_delta = pit->params().depth() - tmpbuf->params().depth();
+ ParagraphList::iterator tmpbuf = insertion.begin();
+ int depth_delta = pars[pit].params().depth() - tmpbuf->params().depth();
- Paragraph::depth_type max_depth = pit->getMaxDepthAfter();
+ Paragraph::depth_type max_depth = pars[pit].getMaxDepthAfter();
- for (; tmpbuf != simple_cut_clone.end(); ++tmpbuf) {
+ for (; tmpbuf != insertion.end(); ++tmpbuf) {
// If we have a negative jump so that the depth would
// go below 0 depth then we have to redo the delta to
// this new max depth level so that subsequent
// paragraphs are aligned correctly to this paragraph
// at level 0.
- if ((int(tmpbuf->params().depth()) + depth_delta) < 0)
+ if (int(tmpbuf->params().depth()) + depth_delta < 0)
depth_delta = 0;
// Set the right depth so that we are not too deep or shallow.
// Only set this from the 2nd on as the 2nd depends
// for maxDepth still on pit.
- if (tmpbuf != simple_cut_clone.begin())
+ if (tmpbuf != insertion.begin())
max_depth = tmpbuf->getMaxDepthAfter();
// Set the inset owner of this paragraph.
- tmpbuf->setInsetOwner(pit->inInset());
+ tmpbuf->setInsetOwner(pars[pit].inInset());
for (pos_type i = 0; i < tmpbuf->size(); ++i) {
if (tmpbuf->getChar(i) == Paragraph::META_INSET) {
- if (!pit->insetAllowed(tmpbuf->getInset(i)->lyxCode())) {
+ if (!pars[pit].insetAllowed(tmpbuf->getInset(i)->lyxCode()))
tmpbuf->erase(i--);
- }
- } else {
- LyXFont f1 = tmpbuf->getFont(buffer.params, i, outerFont(pit, pars));
- LyXFont f2 = f1;
- if (!pit->checkInsertChar(f1)) {
- tmpbuf->erase(i--);
- } else if (f1 != f2) {
- tmpbuf->setFont(i, f1);
- }
}
}
}
- // Make the buf exactly the same layout than
- // the cursor paragraph.
- simple_cut_clone.begin()->makeSameLayout(*pit);
+ // Make the buf exactly the same layout as the cursor paragraph.
+ insertion.begin()->makeSameLayout(pars[pit]);
+
+ // Prepare the paragraphs and insets for insertion.
+ // A couple of insets store buffer references so need updating.
+ InsetText in;
+ std::swap(in.paragraphs(), insertion);
- // Prepare the paragraphs and insets for insertion
- // A couple of insets store buffer references so need
- // updating
- ParIterator fpit(simple_cut_clone.begin(), simple_cut_clone);
- ParIterator fend(simple_cut_clone.end(), simple_cut_clone);
+ ParIterator fpit = ParIterator(in, 0);
+ ParIterator fend = ParIterator(DocumentIterator());
for (; fpit != fend; ++fpit) {
InsetList::iterator lit = fpit->insetlist.begin();
for (; lit != eit; ++lit) {
switch (lit->inset->lyxCode()) {
- case InsetOld::INCLUDE_CODE: {
- InsetInclude * ii = static_cast<InsetInclude*>(lit->inset);
- InsetInclude::Params ip = ii->params();
- ip.masterFilename_ = buffer.fileName();
- ii->set(ip);
- break;
- }
-
case InsetOld::TABULAR_CODE: {
InsetTabular * it = static_cast<InsetTabular*>(lit->inset);
it->buffer(const_cast<Buffer*>(&buffer));
}
}
}
-
- bool paste_the_end = false;
-
- // Open the paragraph for inserting the buf
- // if necessary.
- if (pit->size() > pos || boost::next(pit) == pars.end()) {
- breakParagraphConservative(buffer.params,
- pars, pit, pos);
- paste_the_end = true;
+ std::swap(in.paragraphs(), insertion);
+
+ // Split the paragraph for inserting the buf if necessary.
+ bool did_split = false;
+ if (pars[pit].size() || pit + 1 == par_type(pars.size())) {
+ breakParagraphConservative(buffer.params(), pars, pit, pos);
+ did_split = true;
}
- // Set the end for redoing later.
- ParagraphList::iterator endpit = boost::next(boost::next(pit));
-
// Paste it!
+ pars.insert(pars.begin() + pit + 1, insertion.begin(), insertion.end());
+ mergeParagraph(buffer.params(), pars, pit);
- ParagraphList::iterator past_pit = boost::next(pit);
- pars.splice(past_pit, simple_cut_clone);
- ParagraphList::iterator last_paste = boost::prior(past_pit);
-
- // If we only inserted one paragraph.
- if (boost::next(pit) == last_paste)
- last_paste = pit;
-
- mergeParagraph(buffer.params, pars, pit);
-
+ par_type last_paste = pit + insertion.size() - 1;
+
// Store the new cursor position.
pit = last_paste;
- pos = last_paste->size();
+ pos = pars[last_paste].size();
// Maybe some pasting.
-#warning CHECK! Are we comparing last_paste to the wrong list here? (Lgb)
- if (boost::next(last_paste) != pars.end() &&
- paste_the_end) {
- if (boost::next(last_paste)->hasSameLayout(*last_paste)) {
- mergeParagraph(buffer.params, pars,
- last_paste);
- } else if (boost::next(last_paste)->empty()) {
- boost::next(last_paste)->makeSameLayout(*last_paste);
- mergeParagraph(buffer.params, pars,
- last_paste);
- } else if (last_paste->empty()) {
- last_paste->makeSameLayout(*boost::next(last_paste));
- mergeParagraph(buffer.params, pars,
- last_paste);
- } else
- boost::next(last_paste)->stripLeadingSpaces();
+ if (did_split && last_paste + 1 != par_type(pars.size())) {
+ if (pars[last_paste + 1].hasSameLayout(pars[last_paste])) {
+ mergeParagraph(buffer.params(), pars, last_paste);
+ } else if (pars[last_paste + 1].empty()) {
+ pars[last_paste + 1].makeSameLayout(pars[last_paste]);
+ mergeParagraph(buffer.params(), pars, last_paste);
+ } else if (pars[last_paste].empty()) {
+ pars[last_paste].makeSameLayout(pars[last_paste + 1]);
+ mergeParagraph(buffer.params(), pars, last_paste);
+ } else {
+ pars[last_paste + 1].stripLeadingSpaces();
+ ++last_paste;
+ }
}
- return make_pair(PitPosPair(pit, pos), endpit);
+ return make_pair(PitPosPair(pit, pos), last_paste + 1);
+}
+
+
+pair<PitPosPair, par_type>
+pasteSelection(Buffer const & buffer, ParagraphList & pars,
+ par_type pit, int pos, textclass_type tc, ErrorList & errorlist)
+{
+ return pasteSelection(buffer, pars, pit, pos, tc, 0, errorlist);
}
-int CutAndPaste::nrOfParagraphs()
+int nrOfParagraphs()
{
return cuts.empty() ? 0 : cuts[0].first.size();
}
-int CutAndPaste::SwitchLayoutsBetweenClasses(textclass_type c1,
- textclass_type c2,
- ParagraphList & pars,
- ErrorList & errorlist)
+bool checkPastePossible()
{
- Assert(!pars.empty());
+ return !cuts.empty() && !cuts[0].first.empty();
+}
- int ret = 0;
- if (c1 == c2)
- return ret;
- LyXTextClass const & tclass1 = textclasslist[c1];
- LyXTextClass const & tclass2 = textclasslist[c2];
- ParIterator end = ParIterator(pars.end(), pars);
- for (ParIterator it = ParIterator(pars.begin(), pars); it != end; ++it) {
- string const name = it->layout()->name();
- bool hasLayout = tclass2.hasLayout(name);
+void cutSelection(LCursor & cur, bool doclear, bool realcut)
+{
+ LyXText * text = cur.text();
+ BOOST_ASSERT(text);
+ // Stuff what we got on the clipboard. Even if there is no selection.
+
+ // There is a problem with having the stuffing here in that the
+ // larger the selection the slower LyX will get. This can be
+ // solved by running the line below only when the selection has
+ // finished. The solution used currently just works, to make it
+ // faster we need to be more clever and probably also have more
+ // calls to stuffClipboard. (Lgb)
+ cur.bv().stuffClipboard(cur.selectionAsString(true));
+
+ // This doesn't make sense, if there is no selection
+ if (!cur.selection())
+ return;
+
+ // OK, we have a selection. This is always between cur.selBegin()
+ // and cur.selEnd()
+
+ // make sure that the depth behind the selection are restored, too
+ recordUndoSelection(cur);
+ par_type begpit = cur.selBegin().par();
+ par_type endpit = cur.selEnd().par();
+
+ int endpos = cur.selEnd().pos();
+
+ BufferParams const & bufparams = cur.bv().buffer()->params();
+ boost::tie(endpit, endpos) = realcut ?
+ cutSelection(bufparams,
+ text->paragraphs(),
+ begpit, endpit,
+ cur.selBegin().pos(), endpos,
+ bufparams.textclass,
+ doclear)
+ : eraseSelection(bufparams,
+ text->paragraphs(),
+ begpit, endpit,
+ cur.selBegin().pos(), endpos,
+ doclear);
+ // sometimes necessary
+ if (doclear)
+ text->paragraphs()[begpit].stripLeadingSpaces();
+
+ text->redoParagraphs(begpit, begpit + 1);
+ // cutSelection can invalidate the cursor so we need to set
+ // it anew. (Lgb)
+ // we prefer the end for when tracking changes
+ cur.pos() = endpos;
+ cur.par() = endpit;
+
+ // need a valid cursor. (Lgb)
+ cur.clearSelection();
+ text->updateCounters();
+}
- if (hasLayout)
- it->layout(tclass2[name]);
- else
- it->layout(tclass2.defaultLayout());
- if (!hasLayout && name != tclass1.defaultLayoutName()) {
- ++ret;
- string const s = bformat(
- _("Layout had to be changed from\n%1$s to %2$s\n"
- "because of class conversion from\n%3$s to %4$s"),
- name, it->layout()->name(), tclass1.name(), tclass2.name());
- // To warn the user that something had to be done.
- errorlist.push_back(ErrorItem("Changed Layout", s,
- it->id(), 0,
- it->size()));
- }
- }
- return ret;
+void copySelection(LCursor & cur)
+{
+ LyXText * text = cur.text();
+ BOOST_ASSERT(text);
+ // stuff the selection onto the X clipboard, from an explicit copy request
+ cur.bv().stuffClipboard(cur.selectionAsString(true));
+
+ // this doesn't make sense, if there is no selection
+ if (!cur.selection())
+ return;
+
+ // ok we have a selection. This is always between cur.selBegin()
+ // and sel_end cursor
+
+ // copy behind a space if there is one
+ ParagraphList & pars = text->paragraphs();
+ pos_type pos = cur.selBegin().pos();
+ par_type par = cur.selBegin().par();
+ while (pos < pars[par].size()
+ && pars[par].isLineSeparator(pos)
+ && (par != cur.selEnd().par() || pos < cur.selEnd().pos()))
+ ++pos;
+
+ copySelection(pars, par, cur.selEnd().par(),
+ pos, cur.selEnd().pos(), cur.bv().buffer()->params().textclass);
}
-bool CutAndPaste::checkPastePossible()
+void pasteSelection(LCursor & cur, size_t sel_index)
{
- return !cuts.empty() && !cuts[0].first.empty();
+ LyXText * text = cur.text();
+ BOOST_ASSERT(text);
+ // this does not make sense, if there is nothing to paste
+ if (!checkPastePossible())
+ return;
+
+ recordUndo(cur);
+
+ par_type endpit;
+ PitPosPair ppp;
+
+ ErrorList el;
+
+ boost::tie(ppp, endpit) =
+ pasteSelection(*cur.bv().buffer(),
+ text->paragraphs(),
+ cur.par(), cur.pos(),
+ cur.bv().buffer()->params().textclass,
+ sel_index, el);
+ bufferErrors(*cur.bv().buffer(), el);
+ text->bv()->showErrorList(_("Paste"));
+
+ text->redoParagraphs(cur.par(), endpit);
+
+ cur.clearSelection();
+ cur.resetAnchor();
+ text->setCursor(cur, ppp.first, ppp.second);
+ cur.setSelection();
+ text->updateCounters();
}
+
+
+void setSelectionRange(LCursor & cur, pos_type length)
+{
+ LyXText * text = cur.text();
+ BOOST_ASSERT(text);
+ if (!length)
+ return;
+ cur.resetAnchor();
+ while (length--)
+ text->cursorRight(cur);
+ cur.setSelection();
+}
+
+
+// simple replacing. The font of the first selected character is used
+void replaceSelectionWithString(LCursor & cur, string const & str)
+{
+ LyXText * text = cur.text();
+ BOOST_ASSERT(text);
+ recordUndo(cur);
+
+ // Get font setting before we cut
+ pos_type pos = cur.selEnd().pos();
+ LyXFont const font = text->getPar(cur.selBegin().par()).
+ getFontSettings(cur.bv().buffer()->params(), cur.selBegin().pos());
+
+ // Insert the new string
+ string::const_iterator cit = str.begin();
+ string::const_iterator end = str.end();
+ for (; cit != end; ++cit, ++pos)
+ text->getPar(cur.selEnd().par()).insertChar(pos, (*cit), font);
+
+ // Cut the selection
+ cutSelection(cur, true, false);
+}
+
+
+void replaceSelection(LCursor & cur)
+{
+ if (cur.selection())
+ cutSelection(cur, true, false);
+}
+
+
+// only used by the spellchecker
+void replaceWord(LCursor & cur, string const & replacestring)
+{
+ LyXText * text = cur.text();
+ BOOST_ASSERT(text);
+
+ replaceSelectionWithString(cur, replacestring);
+ setSelectionRange(cur, replacestring.length());
+
+ // Go back so that replacement string is also spellchecked
+ for (string::size_type i = 0; i < replacestring.length() + 1; ++i)
+ text->cursorLeft(cur);
+}
+
+
+} // namespace cap
+} // namespace lyx
projects / lyx.git / blobdiff