#include "gettext.h"
#include "ParagraphParameters.h"
#include "undo_funcs.h"
-#include "lyxtextclasslist.h"
+#include "funcrequest.h"
#include "insets/insetbib.h"
#include "insets/insettext.h"
#include "insets/insetref.h"
#include "insets/insetparent.h"
#include "insets/insetindex.h"
-#include "insets/insetnote.h"
#include "insets/insetinclude.h"
#include "insets/insetcite.h"
-#include "insets/insetert.h"
-#include "insets/insetexternal.h"
#include "insets/insetgraphics.h"
-#include "insets/insetfoot.h"
#include "insets/insetmarginal.h"
-#include "insets/insetminipage.h"
-#include "insets/insetfloat.h"
-#include "insets/insettabular.h"
-#if 0
-#include "insets/insettheorem.h"
-#include "insets/insetlist.h"
-#endif
#include "insets/insetcaption.h"
#include "insets/insetfloatlist.h"
-#include "insets/insetspecialchar.h"
#include "mathed/formulabase.h"
+#include "graphics/Previews.h"
+
#include "support/LAssert.h"
#include "support/lstrings.h"
#include "support/filetools.h"
-#include "support/lyxfunctional.h"
#include <boost/bind.hpp>
+#include <boost/signals/connection.hpp>
-#include <cstdio>
-#include <ctime>
#include <unistd.h>
#include <sys/wait.h>
-#include <clocale>
-
-extern string current_layout;
-
-#ifndef CXX_GLOBAL_CSTD
-using std::tm;
-using std::localtime;
-using std::time;
-using std::setlocale;
-using std::strftime;
-#endif
using std::vector;
using std::find_if;
using std::min;
using lyx::pos_type;
-using lyx::textclass_type;
/* the selection possible is needed, that only motion events are
* used, where the bottom press event was on the drawing area too */
bool selection_possible = false;
extern BufferList bufferlist;
-extern char ascii_type;
-
extern int bibitemMaxWidth(BufferView *, LyXFont const &);
namespace {
-const unsigned int saved_positions_num = 20;
-
+unsigned int const saved_positions_num = 20;
+
+// All the below connection objects are needed because of a bug in some
+// versions of GCC (<=2.96 are on the suspects list.) By having and assigning
+// to these connections we avoid a segfault upon startup, and also at exit.
+// (Lgb)
+
+boost::signals::connection timecon;
+boost::signals::connection doccon;
+boost::signals::connection resizecon;
+boost::signals::connection bpresscon;
+boost::signals::connection breleasecon;
+boost::signals::connection motioncon;
+boost::signals::connection doublecon;
+boost::signals::connection triplecon;
+boost::signals::connection kpresscon;
+boost::signals::connection selectioncon;
+boost::signals::connection lostcon;
} // anon namespace
-BufferView::Pimpl::Pimpl(BufferView * b, LyXView * o,
+BufferView::Pimpl::Pimpl(BufferView * bv, LyXView * owner,
int xpos, int ypos, int width, int height)
- : bv_(b), owner_(o), buffer_(0), cursor_timeout(400),
+ : bv_(bv), owner_(owner), buffer_(0), cursor_timeout(400),
using_xterm_cursor(false)
{
workarea_.reset(WorkAreaFactory::create(xpos, ypos, width, height));
screen_.reset(LyXScreenFactory::create(workarea()));
-
+
// Setup the signals
- workarea().scrollDocView.connect(boost::bind(&BufferView::Pimpl::scrollDocView, this, _1));
- workarea().workAreaResize
+ doccon = workarea().scrollDocView
+ .connect(boost::bind(&BufferView::Pimpl::scrollDocView, this, _1));
+ resizecon = workarea().workAreaResize
.connect(boost::bind(&BufferView::Pimpl::workAreaResize, this));
- workarea().workAreaButtonPress
+ bpresscon = workarea().workAreaButtonPress
.connect(boost::bind(&BufferView::Pimpl::workAreaButtonPress, this, _1, _2, _3));
- workarea().workAreaButtonRelease
+ breleasecon = workarea().workAreaButtonRelease
.connect(boost::bind(&BufferView::Pimpl::workAreaButtonRelease, this, _1, _2, _3));
- workarea().workAreaMotionNotify
+ motioncon = workarea().workAreaMotionNotify
.connect(boost::bind(&BufferView::Pimpl::workAreaMotionNotify, this, _1, _2, _3));
- workarea().workAreaDoubleClick
+ doublecon = workarea().workAreaDoubleClick
.connect(boost::bind(&BufferView::Pimpl::doubleClick, this, _1, _2, _3));
- workarea().workAreaTripleClick
+ triplecon = workarea().workAreaTripleClick
.connect(boost::bind(&BufferView::Pimpl::tripleClick, this, _1, _2, _3));
- workarea().workAreaKeyPress
+ kpresscon = workarea().workAreaKeyPress
.connect(boost::bind(&BufferView::Pimpl::workAreaKeyPress, this, _1, _2));
- workarea().selectionRequested
+ selectioncon = workarea().selectionRequested
.connect(boost::bind(&BufferView::Pimpl::selectionRequested, this));
- workarea().selectionLost
+ lostcon = workarea().selectionLost
.connect(boost::bind(&BufferView::Pimpl::selectionLost, this));
- cursor_timeout.timeout.connect(boost::bind(&BufferView::Pimpl::cursorToggle, this));
+ timecon = cursor_timeout.timeout
+ .connect(boost::bind(&BufferView::Pimpl::cursorToggle, this));
cursor_timeout.start();
saved_positions.resize(saved_positions_num);
}
return *workarea_.get();
}
-
+
LyXScreen & BufferView::Pimpl::screen() const
{
return *screen_.get();
bv_->text = 0;
}
- // Set current buffer
+ // set current buffer
buffer_ = b;
if (bufferlist.getState() == BufferList::CLOSING) return;
- // If we are closing the buffer, use the first buffer as current
+ // if we are closing the buffer, use the first buffer as current
if (!buffer_) {
buffer_ = bufferlist.first();
}
if (buffer_) {
lyxerr[Debug::INFO] << "Buffer addr: " << buffer_ << endl;
buffer_->addUser(bv_);
+
// If we don't have a text object for this, we make one
if (bv_->text == 0) {
resizeCurrentBuffer();
- } else {
- updateScreen();
- updateScrollbar();
}
- bv_->text->first_y = screen().topCursorVisible(bv_->text->cursor, bv_->text->first_y);
- owner_->updateMenubar();
- owner_->updateToolbar();
+
+ // FIXME: needed when ?
+ bv_->text->first_y =
+ screen().topCursorVisible(bv_->text->cursor, bv_->text->first_y);
+
// Similarly, buffer-dependent dialogs should be updated or
// hidden. This should go here because some dialogs (eg ToC)
// require bv_->text.
- owner_->getDialogs()->updateBufferDependent(true);
- redraw();
+ owner_->getDialogs().updateBufferDependent(true);
} else {
lyxerr[Debug::INFO] << " No Buffer!" << endl;
- owner_->updateMenubar();
- owner_->updateToolbar();
- owner_->getDialogs()->hideBufferDependent();
- updateScrollbar();
- workarea().redraw();
+ owner_->getDialogs().hideBufferDependent();
// Also remove all remaining text's from the testcache.
// (there should not be any!) (if there is any it is a
textcache.show(lyxerr, "buffer delete all");
textcache.clear();
}
- // should update layoutchoice even if we don't have a buffer.
- owner_->updateLayoutChoice();
+ repaint();
+ updateScrollbar();
+ owner_->updateMenubar();
+ owner_->updateToolbar();
+ owner_->updateLayoutChoice();
owner_->updateWindowTitle();
-}
-
-void BufferView::Pimpl::redraw()
-{
- lyxerr[Debug::INFO] << "BufferView::redraw()" << endl;
- workarea().redraw();
+ if (grfx::Previews::activated() && buffer_)
+ grfx::Previews::get().generateBufferPreviews(*buffer_);
}
ret = screen().fitCursor(bv_->text, bv_);
}
- bv_->owner()->getDialogs()->updateParagraph();
+ bv_->owner()->getDialogs().updateParagraph();
if (ret)
- updateScrollbar();
+ updateScrollbar();
return ret;
}
lyxerr[Debug::INFO] << "BufferView::redoCurrentBuffer" << endl;
if (buffer_ && bv_->text) {
resizeCurrentBuffer();
+ updateScrollbar();
owner_->updateLayoutChoice();
+ repaint();
}
}
bv_->text->first_y = screen().topCursorVisible(bv_->text->cursor, bv_->text->first_y);
- // this will scroll the screen such that the cursor becomes visible
- updateScrollbar();
- redraw();
-
- setState();
+ switchKeyMap();
owner_->allowInput();
- /// clear the "Formatting Document" message
- owner_->message("");
+ updateScrollbar();
return 0;
}
-void BufferView::Pimpl::updateScreen()
+void BufferView::Pimpl::repaint()
{
// Regenerate the screen.
screen().redraw(bv_->text, bv_);
}
LyXText const & t = *bv_->text;
-
+
+ lyxerr[Debug::GUI] << "Updating scrollbar: h " << t.height << ", first_y "
+ << t.first_y << ", default height " << t.defaultHeight() << endl;
+
workarea().setScrollbarParams(t.height, t.first_y, t.defaultHeight());
}
return 0;
LyXText const * t = bv_->text;
-
- double const diff = t->defaultHeight()
+
+ double const diff = t->defaultHeight()
+ double(time) * double(time) * 0.125;
-
+
scrollDocView(int(diff));
workarea().setScrollbarParams(t->height, t->first_y, t->defaultHeight());
return 0;
void BufferView::Pimpl::workAreaKeyPress(LyXKeySymPtr key,
key_modifier::state state)
{
- bv_->owner()->getLyXFunc()->processKeySym(key, state);
+ bv_->owner()->getLyXFunc().processKeySym(key, state);
}
? cursor.ix() - width : cursor.ix();
int start_x = inset_x + bv_->theLockingInset()->scroll();
- bv_->theLockingInset()->
- insetMotionNotify(bv_,
- x - start_x,
- y - cursor.iy() + bv_->text->first_y,
- state);
+ FuncRequest cmd(bv_, LFUN_MOUSE_MOTION,
+ x - start_x, y - cursor.iy() + bv_->text->first_y, state);
+ bv_->theLockingInset()->localDispatch(cmd);
return;
}
- /* The test for not selection possible is needed, that only motion
- events are used, where the bottom press event was on
- the drawing area too */
+ // The test for not selection possible is needed, that only motion
+ // events are used, where the bottom press event was on
+ // the drawing area too
if (!selection_possible)
return;
// we have to check this first
bool paste_internally = false;
if (button == mouse_button::button2 && bv_->getLyXText()->selection.set()) {
- owner_->getLyXFunc()->dispatch(LFUN_COPY);
+ owner_->dispatch(FuncRequest(LFUN_COPY));
paste_internally = true;
}
if (bv_->theLockingInset()) {
// We are in inset locking mode
- /* Check whether the inset was hit. If not reset mode,
- otherwise give the event to the inset */
+ // Check whether the inset was hit. If not reset mode,
+ // otherwise give the event to the inset
if (inset_hit == bv_->theLockingInset()) {
- bv_->theLockingInset()->
- insetButtonPress(bv_, xpos, ypos, button);
+ FuncRequest cmd(bv_, LFUN_MOUSE_PRESS, xpos, ypos, button);
+ bv_->theLockingInset()->localDispatch(cmd);
return;
- } else {
- bv_->unlockInset(bv_->theLockingInset());
}
+ bv_->unlockInset(bv_->theLockingInset());
}
if (!inset_hit)
if (!bv_->lockInset(inset)) {
lyxerr[Debug::INSETS] << "Cannot lock inset" << endl;
}
- inset->insetButtonPress(bv_, xpos, ypos, button);
+ FuncRequest cmd(bv_, LFUN_MOUSE_PRESS, xpos, ypos, button);
+ inset->localDispatch(cmd);
return;
}
// I'm not sure we should continue here if we hit an inset (Jug20020403)
// insert this
if (button == mouse_button::button2) {
if (paste_internally)
- owner_->getLyXFunc()->dispatch(LFUN_PASTE);
+ owner_->dispatch(FuncRequest(LFUN_PASTE));
else
- owner_->getLyXFunc()->dispatch(LFUN_PASTESELECTION,
- "paragraph");
+ owner_->dispatch(FuncRequest(LFUN_PASTESELECTION, "paragraph"));
selection_possible = false;
return;
}
} else {
text->selectWord(bv_, LyXText::WHOLE_WORD_STRICT);
}
- /* This will fit the cursor on the screen
- * if necessary */
+ // This will fit the cursor on the screen if necessary
update(text, BufferView::SELECT|BufferView::FITCUR);
+ workarea().haveSelection(bv_->getLyXText()->selection.set());
}
}
if (text->bv_owner) {
screen().toggleSelection(text, bv_, false);
}
- /* This will fit the cursor on the screen
- * if necessary */
+ // This will fit the cursor on the screen if necessary
update(text, BufferView::SELECT|BufferView::FITCUR);
+ workarea().haveSelection(bv_->getLyXText()->selection.set());
}
}
if (bv_->theLockingInset()) {
// We are in inset locking mode.
- /* LyX does a kind of work-area grabbing for insets.
- Only a ButtonPress Event outside the inset will
- force a insetUnlock. */
- bv_->theLockingInset()->
- insetButtonRelease(bv_, x, y, button);
+ // LyX does a kind of work-area grabbing for insets.
+ // Only a ButtonPress FuncRequest outside the inset will
+ // force a insetUnlock.
+ FuncRequest cmd(bv_, LFUN_MOUSE_RELEASE, x, y, button);
+ bv_->theLockingInset()->localDispatch(cmd);
return;
}
workarea().haveSelection(bv_->getLyXText()->selection.set());
}
- setState();
- owner_->showState();
+ switchKeyMap();
+ owner_->view_state_changed();
owner_->updateMenubar();
owner_->updateToolbar();
if (isHighlyEditableInset(inset_hit)) {
// Highly editable inset, like math
UpdatableInset *inset = (UpdatableInset *)inset_hit;
- inset->insetButtonRelease(bv_, x, y, button);
+ FuncRequest cmd(bv_, LFUN_MOUSE_RELEASE, x, y, button);
+ inset->localDispatch(cmd);
} else {
- inset_hit->insetButtonRelease(bv_, x, y, button);
+ FuncRequest cmd(bv_, LFUN_MOUSE_RELEASE, x, y, button);
+ inset_hit->localDispatch(cmd);
// IMO this is a grosshack! Inset's should be changed so that
// they call the actions they have to do with the insetButtonRel.
// function and not in the edit(). This should be changed
// (Jug 20020329)
+#ifdef WITH_WARNINGS
+#warning Please remove donot call inset->edit() here (Jug 20020812)
+#endif
inset_hit->edit(bv_, x, y, button);
}
return;
}
// Maybe we want to edit a bibitem ale970302
- if (bv_->text->cursor.par()->bibkey && x < 20 +
- bibitemMaxWidth(bv_, textclasslist[buffer_->params.textclass].defaultfont())) {
- bv_->text->cursor.par()->bibkey->edit(bv_, 0, 0, mouse_button::none);
+ if (bv_->text->cursor.par()->bibkey) {
+ bool const is_rtl = bv_->text->cursor.par()->isRightToLeftPar(buffer_->params);
+ int const width = bibitemMaxWidth(bv_, buffer_->params.getLyXTextClass().defaultfont());
+ if ((is_rtl && x > bv_->text->workWidth(bv_)-20-width) ||
+ (!is_rtl && x < 20+width)) {
+ bv_->text->cursor.par()->bibkey->edit(bv_, 0, 0, mouse_button::none);
+ }
}
return;
LyXCursor cursor;
text->setCursorFromCoordinates(bv_, cursor, x, y_tmp);
- Inset * inset(checkInset(*text, cursor, x, y_tmp));
+ Inset * inset = checkInset(*text, cursor, x, y_tmp);
if (inset) {
y = y_tmp;
}
// look at previous position
-
if (cursor.pos() == 0) {
return 0;
}
void BufferView::Pimpl::workAreaResize()
{
static int work_area_width;
- static unsigned int work_area_height;
+ static int work_area_height;
bool const widthChange = workarea().workWidth() != work_area_width;
bool const heightChange = workarea().workHeight() != work_area_height;
// update from work area
work_area_width = workarea().workWidth();
work_area_height = workarea().workHeight();
+
if (buffer_ != 0) {
if (widthChange) {
// The visible LyXView need a resize
if (lyxerr.debugging())
textcache.show(lyxerr, "Expose delete all");
textcache.clear();
- // FIXME: this is aalready done in resizeCurrentBuffer() ??
+ // FIXME: this is already done in resizeCurrentBuffer() ??
buffer_->resizeInsets(bv_);
} else if (heightChange) {
// fitCursor() ensures we don't jump back
// to the start of the document on vertical
// resize
fitCursor();
-
- // The main window size has changed, repaint most stuff
- redraw();
- } else {
- screen().redraw(bv_->text, bv_);
}
- } else {
- screen().redraw(bv_->text, bv_);
+ }
+
+ if (widthChange || heightChange) {
+ repaint();
}
// always make sure that the scrollbar is sane.
if (text->inset_owner) {
text->inset_owner->setUpdateStatus(bv_, InsetText::NONE);
- updateInset(text->inset_owner, false);
+ updateInset(text->inset_owner, false);
} else {
- update();
+ update();
}
if ((f & FITCUR)) {
}
-void BufferView::Pimpl::cursorPrevious(LyXText * text)
-{
- if (!text->cursor.row()->previous()) {
- if (text->first_y > 0) {
- int new_y = bv_->text->first_y - workarea().workHeight();
- screen().draw(bv_->text, bv_, new_y < 0 ? 0 : new_y);
- updateScrollbar();
- }
- return;
- }
-
- int y = text->first_y;
- Row * cursorrow = text->cursor.row();
-
- text->setCursorFromCoordinates(bv_, text->cursor.x_fix(), y);
- finishUndo();
-
- int new_y;
- if (cursorrow == bv_->text->cursor.row()) {
- // we have a row which is higher than the workarea so we leave the
- // cursor on the start of the row and move only the draw up as soon
- // as we move the cursor or do something while inside the row (it may
- // span several workarea-heights) we'll move to the top again, but this
- // is better than just jump down and only display part of the row.
- new_y = bv_->text->first_y - workarea().workHeight();
- } else {
- if (text->inset_owner) {
- new_y = bv_->text->cursor.iy()
- + bv_->theLockingInset()->insetInInsetY() + y
- + text->cursor.row()->height()
- - workarea().workHeight() + 1;
- } else {
- new_y = text->cursor.y()
- - text->cursor.row()->baseline()
- + text->cursor.row()->height()
- - workarea().workHeight() + 1;
- }
- }
- screen().draw(bv_->text, bv_, new_y < 0 ? 0 : new_y);
- if (text->cursor.row()->previous()) {
- LyXCursor cur;
- text->setCursor(bv_, cur, text->cursor.row()->previous()->par(),
- text->cursor.row()->previous()->pos(), false);
- if (cur.y() > text->first_y) {
- text->cursorUp(bv_, true);
- }
- }
- updateScrollbar();
-}
-
-
-void BufferView::Pimpl::cursorNext(LyXText * text)
-{
- if (!text->cursor.row()->next()) {
- int y = text->cursor.y() - text->cursor.row()->baseline() +
- text->cursor.row()->height();
- if (y > int(text->first_y + workarea().workHeight())) {
- screen().draw(bv_->text, bv_,
- bv_->text->first_y + workarea().workHeight());
- updateScrollbar();
- }
- return;
- }
-
- int y = text->first_y + workarea().workHeight();
- if (text->inset_owner && !text->first_y) {
- y -= (bv_->text->cursor.iy()
- - bv_->text->first_y
- + bv_->theLockingInset()->insetInInsetY());
- }
-
- text->getRowNearY(y);
-
- Row * cursorrow = text->cursor.row();
- text->setCursorFromCoordinates(bv_, text->cursor.x_fix(), y); // + workarea().workHeight());
- finishUndo();
-
- int new_y;
- if (cursorrow == bv_->text->cursor.row()) {
- // we have a row which is higher than the workarea so we leave the
- // cursor on the start of the row and move only the draw down as soon
- // as we move the cursor or do something while inside the row (it may
- // span several workarea-heights) we'll move to the top again, but this
- // is better than just jump down and only display part of the row.
- new_y = bv_->text->first_y + workarea().workHeight();
- } else {
- if (text->inset_owner) {
- new_y = bv_->text->cursor.iy()
- + bv_->theLockingInset()->insetInInsetY()
- + y - text->cursor.row()->baseline();
- } else {
- new_y = text->cursor.y() - text->cursor.row()->baseline();
- }
- }
- screen().draw(bv_->text, bv_, new_y);
- if (text->cursor.row()->next()) {
- LyXCursor cur;
- text->setCursor(bv_, cur, text->cursor.row()->next()->par(),
- text->cursor.row()->next()->pos(), false);
- if (cur.y() < int(text->first_y + workarea().workHeight())) {
- text->cursorDown(bv_, true);
- }
- }
- updateScrollbar();
-}
-
-
bool BufferView::Pimpl::available() const
{
if (buffer_ && bv_->text)
bv_->text->setCursor(bv_, par,
min(par->size(), saved_positions[i].par_pos));
- update(bv_->text, BufferView::SELECT|BufferView::FITCUR);
+ update(bv_->text, BufferView::SELECT | BufferView::FITCUR);
if (i > 0) {
ostringstream str;
str << _("Moved to bookmark") << ' ' << i;
}
-void BufferView::Pimpl::setState()
+void BufferView::Pimpl::switchKeyMap()
{
if (!lyxrc.rtl_support)
return;
LyXText * text = bv_->getLyXText();
if (text->real_current_font.isRightToLeft()
&& !(bv_->theLockingInset()
- && bv_->theLockingInset()->lyxCode()== Inset::ERT_CODE))
+ && bv_->theLockingInset()->lyxCode() == Inset::ERT_CODE))
{
- if (owner_->getIntl()->keymap == Intl::PRIMARY)
- owner_->getIntl()->KeyMapSec();
+ if (owner_->getIntl().keymap == Intl::PRIMARY)
+ owner_->getIntl().KeyMapSec();
} else {
- if (owner_->getIntl()->keymap == Intl::SECONDARY)
- owner_->getIntl()->KeyMapPrim();
+ if (owner_->getIntl().keymap == Intl::SECONDARY)
+ owner_->getIntl().KeyMapPrim();
}
}
void BufferView::Pimpl::center()
{
- beforeChange(bv_->text);
- if (bv_->text->cursor.y() > static_cast<int>((workarea().workHeight() / 2))) {
- screen().draw(bv_->text, bv_, bv_->text->cursor.y() - workarea().workHeight() / 2);
- } else {
- screen().draw(bv_->text, bv_, 0);
- }
- update(bv_->text, BufferView::SELECT|BufferView::FITCUR);
- redraw();
-}
-
-
-void BufferView::Pimpl::pasteClipboard(bool asPara)
-{
- if (!buffer_)
- return;
+ LyXText * t = bv_->text;
- screen().hideCursor();
- beforeChange(bv_->text);
+ beforeChange(t);
+ int const half_height = workarea().workHeight() / 2;
+ int new_y = 0;
- string const clip(workarea().getClipboard());
+ if (t->cursor.y() > half_height) {
+ new_y = t->cursor.y() - half_height;
+ }
- if (clip.empty())
- return;
+ // FIXME: can we do this w/o calling screen directly ?
+ // This updates first_y but means the fitCursor() call
+ // from the update(FITCUR) doesn't realise that we might
+ // have moved (e.g. from GOTOPARAGRAPH), so doesn't cause
+ // the scrollbar to be updated as it should, so we have
+ // to do it manually. Any operation that does a center()
+ // and also might have moved first_y must make sure to call
+ // updateScrollbar() currently. Never mind that this is a
+ // pretty obfuscated way of updating t->first_y
+ screen().draw(t, bv_, new_y);
- if (asPara) {
- bv_->getLyXText()->insertStringAsParagraphs(bv_, clip);
- } else {
- bv_->getLyXText()->insertStringAsLines(bv_, clip);
- }
- bv_->getLyXText()->clearSelection();
- update(bv_->text, BufferView::SELECT|BufferView::FITCUR|BufferView::CHANGE);
+ update(t, BufferView::SELECT | BufferView::FITCUR);
}
*/
-inline
-void BufferView::Pimpl::moveCursorUpdate(bool selecting, bool fitcur)
-{
- LyXText * lt = bv_->getLyXText();
-
- if (selecting || lt->selection.mark()) {
- lt->setSelection(bv_);
- if (lt->bv_owner)
- toggleToggle();
- else
- updateInset(lt->inset_owner, false);
- }
- if (lt->bv_owner) {
- if (fitcur)
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- else
- update(lt, BufferView::SELECT);
- showCursor();
- } else if (bv_->text->status() != LyXText::UNCHANGED) {
- bv_->theLockingInset()->hideInsetCursor(bv_);
- update(bv_->text, BufferView::SELECT|BufferView::FITCUR);
- showCursor();
- }
-
- if (!lt->selection.set())
- workarea().haveSelection(false);
-
- /* ---> Everytime the cursor is moved, show the current font state. */
- // should this too me moved out of this func?
- //owner->showState();
- setState();
-}
-
-
Inset * BufferView::Pimpl::getInsetByCode(Inset::Code code)
{
+#if 0
LyXCursor cursor = bv_->getLyXText()->cursor;
Buffer::inset_iterator it =
find_if(Buffer::inset_iterator(
buffer_->inset_iterator_end(),
lyx::compare_memfun(&Inset::lyxCode, code));
return it != buffer_->inset_iterator_end() ? (*it) : 0;
+#else
+ // Ok, this is a little bit too brute force but it
+ // should work for now. Better infrastructure is comming. (Lgb)
+
+ Buffer * b = bv_->buffer();
+ LyXCursor cursor = bv_->getLyXText()->cursor;
+
+ Buffer::inset_iterator beg = b->inset_iterator_begin();
+ Buffer::inset_iterator end = b->inset_iterator_end();
+
+ bool cursor_par_seen = false;
+
+ for (; beg != end; ++beg) {
+ if (beg.getPar() == cursor.par()) {
+ cursor_par_seen = true;
+ }
+ if (cursor_par_seen) {
+ if (beg.getPar() == cursor.par()
+ && beg.getPos() >= cursor.pos()) {
+ break;
+ } else if (beg.getPar() != cursor.par()) {
+ break;
+ }
+ }
+
+ }
+ if (beg != end) {
+ // Now find the first inset that matches code.
+ for (; beg != end; ++beg) {
+ if (beg->lyxCode() == code) {
+ return &(*beg);
+ }
+ }
+ }
+ return 0;
+#endif
}
}
-bool BufferView::Pimpl::Dispatch(kb_action action, string const & argument)
+bool BufferView::Pimpl::dispatch(FuncRequest const & ev)
{
lyxerr[Debug::ACTION] << "BufferView::Pimpl::Dispatch: action["
- << action <<"] arg[" << argument << "]" << endl;
+ << ev.action <<"] arg[" << ev.argument << "]" << endl;
- LyXTextClass const & tclass = textclasslist[buffer_->params.textclass];
+ LyXTextClass const & tclass = buffer_->params.getLyXTextClass();
- switch (action) {
- // --- Misc -------------------------------------------
- case LFUN_APPENDIX:
- {
- if (available()) {
- LyXText * lt = bv_->getLyXText();
- lt->toggleAppendix(bv_);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- }
- break;
+ switch (ev.action) {
case LFUN_TOC_INSERT:
{
}
case LFUN_SCROLL_INSET:
- // this is not handled here as this funktion is only aktive
+ // this is not handled here as this function is only active
// if we have a locking_inset and that one is (or contains)
// a tabular-inset
break;
break;
}
- case LFUN_PASTE:
- bv_->paste();
- setState();
- break;
-
- case LFUN_PASTESELECTION:
- {
- bool asPara = false;
- if (argument == "paragraph")
- asPara = true;
- pasteClipboard(asPara);
- }
- break;
-
- case LFUN_CUT:
- bv_->cut();
- break;
-
- case LFUN_COPY:
- bv_->copy();
- break;
-
case LFUN_LAYOUT_COPY:
bv_->copyEnvironment();
break;
case LFUN_LAYOUT_PASTE:
bv_->pasteEnvironment();
- setState();
- break;
-
- case LFUN_GOTOERROR:
- gotoInset(Inset::ERROR_CODE, false);
- break;
-
- case LFUN_GOTONOTE:
- gotoInset(Inset::IGNORE_CODE, false);
- break;
-
- case LFUN_REFERENCE_GOTO:
- {
- vector<Inset::Code> tmp;
- tmp.push_back(Inset::LABEL_CODE);
- tmp.push_back(Inset::REF_CODE);
- gotoInset(tmp, true);
- break;
- }
-
- case LFUN_HYPHENATION:
- specialChar(InsetSpecialChar::HYPHENATION);
- break;
-
- case LFUN_LIGATURE_BREAK:
- specialChar(InsetSpecialChar::LIGATURE_BREAK);
- break;
-
- case LFUN_LDOTS:
- specialChar(InsetSpecialChar::LDOTS);
- break;
-
- case LFUN_END_OF_SENTENCE:
- specialChar(InsetSpecialChar::END_OF_SENTENCE);
- break;
-
- case LFUN_MENU_SEPARATOR:
- specialChar(InsetSpecialChar::MENU_SEPARATOR);
- break;
-
- case LFUN_HFILL:
- hfill();
+ switchKeyMap();
break;
case LFUN_DEPTH_MIN:
break;
case LFUN_FREE:
- owner_->getDialogs()->setUserFreeFont();
+ owner_->getDialogs().setUserFreeFont();
break;
case LFUN_FILE_INSERT:
- MenuInsertLyXFile(argument);
+ MenuInsertLyXFile(ev.argument);
break;
case LFUN_FILE_INSERT_ASCII_PARA:
- InsertAsciiFile(bv_, argument, true);
+ InsertAsciiFile(bv_, ev.argument, true);
break;
case LFUN_FILE_INSERT_ASCII:
- InsertAsciiFile(bv_, argument, false);
+ InsertAsciiFile(bv_, ev.argument, false);
break;
- case LFUN_LAYOUT:
- {
- lyxerr[Debug::INFO] << "LFUN_LAYOUT: (arg) "
- << argument << endl;
-
- // This is not the good solution to the empty argument
- // problem, but it will hopefully suffice for 1.2.0.
- // The correct solution would be to augument the
- // function list/array with information about what
- // functions needs arguments and their type.
- if (argument.empty()) {
- owner_->getLyXFunc()->setErrorMessage(
- _("LyX function 'layout' needs an argument."));
- break;
- }
-
- // Derive layout number from given argument (string)
- // and current buffer's textclass (number). */
- bool hasLayout = tclass.hasLayout(argument);
- string layout = argument;
-
- // If the entry is obsolete, use the new one instead.
- if (hasLayout) {
- string const & obs = tclass[layout].obsoleted_by();
- if (!obs.empty())
- layout = obs;
- }
-
- if (!hasLayout) {
- owner_->getLyXFunc()->setErrorMessage(
- string(N_("Layout ")) + argument +
- N_(" not known"));
- break;
- }
-
- bool change_layout = (current_layout != layout);
- LyXText * lt = bv_->getLyXText();
- if (!change_layout && lt->selection.set() &&
- lt->selection.start.par() != lt->selection.end.par())
- {
- Paragraph * spar = lt->selection.start.par();
- Paragraph * epar = lt->selection.end.par()->next();
- while(spar != epar) {
- if (spar->layout() != current_layout) {
- change_layout = true;
- break;
- }
- }
- }
- if (change_layout) {
- hideCursor();
- current_layout = layout;
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR);
- lt->setLayout(bv_, layout);
- owner_->setLayout(layout);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- setState();
- }
- }
- break;
-
case LFUN_LANGUAGE:
- lang(bv_, argument);
- setState();
- owner_->showState();
+ lang(bv_, ev.argument);
+ switchKeyMap();
+ owner_->view_state_changed();
break;
case LFUN_EMPH:
emph(bv_);
- owner_->showState();
+ owner_->view_state_changed();
break;
case LFUN_BOLD:
bold(bv_);
- owner_->showState();
+ owner_->view_state_changed();
break;
case LFUN_NOUN:
noun(bv_);
- owner_->showState();
+ owner_->view_state_changed();
break;
case LFUN_CODE:
code(bv_);
- owner_->showState();
+ owner_->view_state_changed();
break;
case LFUN_SANS:
sans(bv_);
- owner_->showState();
+ owner_->view_state_changed();
break;
case LFUN_ROMAN:
roman(bv_);
- owner_->showState();
+ owner_->view_state_changed();
break;
case LFUN_DEFAULT:
styleReset(bv_);
- owner_->showState();
+ owner_->view_state_changed();
break;
case LFUN_UNDERLINE:
underline(bv_);
- owner_->showState();
+ owner_->view_state_changed();
break;
case LFUN_FONT_SIZE:
- fontSize(bv_, argument);
- owner_->showState();
+ fontSize(bv_, ev.argument);
+ owner_->view_state_changed();
break;
case LFUN_FONT_STATE:
- owner_->getLyXFunc()->setMessage(currentState(bv_));
+ owner_->getLyXFunc().setMessage(currentState(bv_));
break;
- case LFUN_UPCASE_WORD:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR);
- lt->changeCase(bv_, LyXText::text_uppercase);
- if (lt->inset_owner)
- updateInset(lt->inset_owner, true);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- break;
-
- case LFUN_LOWCASE_WORD:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->changeCase(bv_, LyXText::text_lowercase);
- if (lt->inset_owner)
- updateInset(lt->inset_owner, true);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- break;
-
- case LFUN_CAPITALIZE_WORD:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->changeCase(bv_, LyXText::text_capitalization);
- if (lt->inset_owner)
- updateInset(lt->inset_owner, true);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- break;
-
- case LFUN_TRANSPOSE_CHARS:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->transposeChars(*bv_);
- if (lt->inset_owner)
- updateInset(lt->inset_owner, true);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- break;
-
-
case LFUN_INSERT_LABEL:
- MenuInsertLabel(bv_, argument);
+ MenuInsertLabel(bv_, ev.argument);
break;
case LFUN_REF_INSERT:
- if (argument.empty()) {
+ if (ev.argument.empty()) {
InsetCommandParams p("ref");
- owner_->getDialogs()->createRef(p.getAsString());
+ owner_->getDialogs().createRef(p.getAsString());
} else {
InsetCommandParams p;
- p.setFromString(argument);
+ p.setFromString(ev.argument);
InsetRef * inset = new InsetRef(p, *buffer_);
if (!insertInset(inset))
break;
case LFUN_BOOKMARK_SAVE:
- savePosition(strToUnsignedInt(argument));
+ savePosition(strToUnsignedInt(ev.argument));
break;
case LFUN_BOOKMARK_GOTO:
- restorePosition(strToUnsignedInt(argument));
+ restorePosition(strToUnsignedInt(ev.argument));
break;
case LFUN_REF_GOTO:
{
- string label(argument);
+ string label = ev.argument;
if (label.empty()) {
InsetRef * inset =
static_cast<InsetRef*>(getInsetByCode(Inset::REF_CODE));
}
break;
- // --- Cursor Movements -----------------------------
- case LFUN_RIGHT:
+ case LFUN_HTMLURL:
+ case LFUN_URL:
{
- LyXText * lt = bv_->getLyXText();
-
- bool is_rtl = lt->cursor.par()->isRightToLeftPar(buffer_->params);
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- if (is_rtl)
- lt->cursorLeft(bv_, false);
- if (lt->cursor.pos() < lt->cursor.par()->size()
- && lt->cursor.par()->isInset(lt->cursor.pos())
- && isHighlyEditableInset(lt->cursor.par()->getInset(lt->cursor.pos()))) {
- Inset * tmpinset = lt->cursor.par()->getInset(lt->cursor.pos());
- owner_->getLyXFunc()->setMessage(tmpinset->editMessage());
- if (is_rtl)
- tmpinset->edit(bv_, false);
- else
- tmpinset->edit(bv_);
- break;
- }
- if (!is_rtl)
- lt->cursorRight(bv_, false);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
+ InsetCommandParams p;
+ if (ev.action == LFUN_HTMLURL)
+ p.setCmdName("htmlurl");
+ else
+ p.setCmdName("url");
+ owner_->getDialogs().createUrl(p.getAsString());
}
break;
- case LFUN_LEFT:
+ case LFUN_INSERT_URL:
{
- // This is soooo ugly. Isn`t it possible to make
- // it simpler? (Lgb)
- LyXText * lt = bv_->getLyXText();
- bool const is_rtl = lt->cursor.par()->isRightToLeftPar(buffer_->params);
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- LyXCursor const cur = lt->cursor;
- if (!is_rtl)
- lt->cursorLeft(bv_, false);
- if ((is_rtl || cur != lt->cursor) && // only if really moved!
- lt->cursor.pos() < lt->cursor.par()->size() &&
- lt->cursor.par()->isInset(lt->cursor.pos()) &&
- isHighlyEditableInset(lt->cursor.par()->getInset(lt->cursor.pos()))) {
- Inset * tmpinset = lt->cursor.par()->getInset(lt->cursor.pos());
- owner_->getLyXFunc()->setMessage(tmpinset->editMessage());
- if (is_rtl)
- tmpinset->edit(bv_);
- else
- tmpinset->edit(bv_, false);
- break;
- }
- if (is_rtl)
- lt->cursorRight(bv_, false);
+ InsetCommandParams p;
+ p.setFromString(ev.argument);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
+ InsetUrl * inset = new InsetUrl(p);
+ if (!insertInset(inset))
+ delete inset;
+ else
+ updateInset(inset, true);
}
break;
- case LFUN_UP:
+ case LFUN_INSET_CAPTION:
{
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::UPDATE);
- lt->cursorUp(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
+ // Do we have a locking inset...
+ if (bv_->theLockingInset()) {
+ lyxerr << "Locking inset code: "
+ << static_cast<int>(bv_->theLockingInset()->lyxCode());
+ InsetCaption * new_inset =
+ new InsetCaption(buffer_->params);
+ new_inset->setOwner(bv_->theLockingInset());
+ new_inset->setAutoBreakRows(true);
+ new_inset->setDrawFrame(0, InsetText::LOCKED);
+ new_inset->setFrameColor(0, LColor::captionframe);
+ if (insertInset(new_inset))
+ new_inset->edit(bv_);
+ else
+ delete new_inset;
+ }
}
break;
- case LFUN_DOWN:
- {
- LyXText * lt = bv_->getLyXText();
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::UPDATE);
- lt->cursorDown(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_UP_PARAGRAPH:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::UPDATE);
- lt->cursorUpParagraph(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_DOWN_PARAGRAPH:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::UPDATE);
- lt->cursorDownParagraph(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_PRIOR:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::UPDATE);
- cursorPrevious(lt);
- finishUndo();
- moveCursorUpdate(false, false);
- owner_->showState();
- }
- break;
-
- case LFUN_NEXT:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::UPDATE);
- cursorNext(lt);
- finishUndo();
- moveCursorUpdate(false, false);
- owner_->showState();
- }
- break;
-
- case LFUN_HOME:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->cursorHome(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_END:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorEnd(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_SHIFT_TAB:
- case LFUN_TAB:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorTab(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_WORDRIGHT:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- if (lt->cursor.par()->isRightToLeftPar(buffer_->params))
- lt->cursorLeftOneWord(bv_);
- else
- lt->cursorRightOneWord(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_WORDLEFT:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- if (lt->cursor.par()->isRightToLeftPar(buffer_->params))
- lt->cursorRightOneWord(bv_);
- else
- lt->cursorLeftOneWord(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_BEGINNINGBUF:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorTop(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- case LFUN_ENDBUF:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.mark())
- beforeChange(lt);
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorBottom(bv_);
- finishUndo();
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- /* cursor selection ---------------------------- */
- case LFUN_RIGHTSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- if (lt->cursor.par()->isRightToLeftPar(buffer_->params))
- lt->cursorLeft(bv_);
- else
- lt->cursorRight(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_LEFTSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- if (lt->cursor.par()->isRightToLeftPar(buffer_->params))
- lt->cursorRight(bv_);
- else
- lt->cursorLeft(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_UPSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorUp(bv_, true);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_DOWNSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorDown(bv_, true);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_UP_PARAGRAPHSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorUpParagraph(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_DOWN_PARAGRAPHSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorDownParagraph(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_PRIORSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- cursorPrevious(lt);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_NEXTSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- cursorNext(lt);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_HOMESEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->cursorHome(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_ENDSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->cursorEnd(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_WORDRIGHTSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- if (lt->cursor.par()->isRightToLeftPar(buffer_->params))
- lt->cursorLeftOneWord(bv_);
- else
- lt->cursorRightOneWord(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_WORDLEFTSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- if (lt->cursor.par()->isRightToLeftPar(buffer_->params))
- lt->cursorRightOneWord(bv_);
- else
- lt->cursorLeftOneWord(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_BEGINNINGBUFSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (lt->inset_owner)
- break;
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->cursorTop(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- case LFUN_ENDBUFSEL:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (lt->inset_owner)
- break;
- update(lt,
- BufferView::SELECT|BufferView::FITCUR);
- lt->cursorBottom(bv_);
- finishUndo();
- moveCursorUpdate(true);
- owner_->showState();
- }
- break;
-
- // --- text changing commands ------------------------
- case LFUN_BREAKLINE:
- {
- LyXText * lt = bv_->getLyXText();
-
- beforeChange(lt);
- lt->insertChar(bv_, Paragraph::META_NEWLINE);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- lt->setCursor(bv_, lt->cursor.par(), lt->cursor.pos());
- moveCursorUpdate(false);
- }
- break;
-
- case LFUN_PROTECTEDSPACE:
- {
- LyXText * lt = bv_->getLyXText();
-
- LyXLayout const & style = tclass[lt->cursor.par()->layout()];
-
- if (style.free_spacing) {
- lt->insertChar(bv_, ' ');
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- } else {
- specialChar(InsetSpecialChar::PROTECTED_SEPARATOR);
- }
- moveCursorUpdate(false);
- }
- break;
-
- case LFUN_SETMARK:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (lt->selection.mark()) {
- beforeChange(lt);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR);
- owner_->getLyXFunc()->setMessage(N_("Mark removed"));
- } else {
- beforeChange(lt);
- lt->selection.mark(true);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR);
- owner_->getLyXFunc()->setMessage(N_("Mark set"));
- }
- lt->selection.cursor = lt->cursor;
- }
- break;
-
- case LFUN_DELETE:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.set()) {
- lt->Delete(bv_);
- lt->selection.cursor = lt->cursor;
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- // It is possible to make it a lot faster still
- // just comment out the line below...
- showCursor();
- } else {
- bv_->cut(false);
- }
- moveCursorUpdate(false);
- owner_->showState();
- setState();
- }
- break;
-
- case LFUN_DELETE_SKIP:
- {
- LyXText * lt = bv_->getLyXText();
-
- // Reverse the effect of LFUN_BREAKPARAGRAPH_SKIP.
-
- LyXCursor cursor = lt->cursor;
-
- if (!lt->selection.set()) {
- if (cursor.pos() == cursor.par()->size()) {
- lt->cursorRight(bv_);
- cursor = lt->cursor;
- if (cursor.pos() == 0
- && !(cursor.par()->params().spaceTop()
- == VSpace (VSpace::NONE))) {
- lt->setParagraph
- (bv_,
- cursor.par()->params().lineTop(),
- cursor.par()->params().lineBottom(),
- cursor.par()->params().pagebreakTop(),
- cursor.par()->params().pagebreakBottom(),
- VSpace(VSpace::NONE),
- cursor.par()->params().spaceBottom(),
- cursor.par()->params().spacing(),
- cursor.par()->params().align(),
- cursor.par()->params().labelWidthString(), 0);
- lt->cursorLeft(bv_);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- } else {
- lt->cursorLeft(bv_);
- lt->Delete(bv_);
- lt->selection.cursor = lt->cursor;
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- } else {
- lt->Delete(bv_);
- lt->selection.cursor = lt->cursor;
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- } else {
- bv_->cut(false);
- }
- }
- break;
-
- /* -------> Delete word forward. */
- case LFUN_DELETE_WORD_FORWARD:
- update(bv_->getLyXText(), BufferView::SELECT|BufferView::FITCUR);
- bv_->getLyXText()->deleteWordForward(bv_);
- update(bv_->getLyXText(), BufferView::SELECT|BufferView::FITCUR|BufferView::CHANGE);
- moveCursorUpdate(false);
- owner_->showState();
- break;
-
- /* -------> Delete word backward. */
- case LFUN_DELETE_WORD_BACKWARD:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->deleteWordBackward(bv_);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- moveCursorUpdate(false);
- owner_->showState();
- }
- break;
-
- /* -------> Kill to end of line. */
- case LFUN_DELETE_LINE_FORWARD:
- {
- LyXText * lt = bv_->getLyXText();
-
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->deleteLineForward(bv_);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- moveCursorUpdate(false);
- }
- break;
-
- /* -------> Set mark off. */
- case LFUN_MARK_OFF:
- {
- LyXText * lt = bv_->getLyXText();
-
- beforeChange(lt);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->selection.cursor = lt->cursor;
- owner_->getLyXFunc()->setMessage(N_("Mark off"));
- }
- break;
-
- /* -------> Set mark on. */
- case LFUN_MARK_ON:
- {
- LyXText * lt = bv_->getLyXText();
-
- beforeChange(lt);
- lt->selection.mark(true);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->selection.cursor = lt->cursor;
- owner_->getLyXFunc()->setMessage(N_("Mark on"));
- }
- break;
-
- case LFUN_BACKSPACE:
- {
- LyXText * lt = bv_->getLyXText();
-
- if (!lt->selection.set()) {
- if (owner_->getIntl()->getTransManager().backspace()) {
- lt->backspace(bv_);
- lt->selection.cursor = lt->cursor;
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- // It is possible to make it a lot faster still
- // just comment out the line below...
- showCursor();
- }
- } else {
- bv_->cut(false);
- }
- owner_->showState();
- setState();
- }
- break;
-
- case LFUN_BACKSPACE_SKIP:
- {
- // Reverse the effect of LFUN_BREAKPARAGRAPH_SKIP.
- LyXText * lt = bv_->getLyXText();
-
- LyXCursor cursor = lt->cursor;
-
- if (!lt->selection.set()) {
- if (cursor.pos() == 0
- && !(cursor.par()->params().spaceTop()
- == VSpace (VSpace::NONE))) {
- lt->setParagraph
- (bv_,
- cursor.par()->params().lineTop(),
- cursor.par()->params().lineBottom(),
- cursor.par()->params().pagebreakTop(),
- cursor.par()->params().pagebreakBottom(),
- VSpace(VSpace::NONE), cursor.par()->params().spaceBottom(),
- cursor.par()->params().spacing(),
- cursor.par()->params().align(),
- cursor.par()->params().labelWidthString(), 0);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- } else {
- lt->backspace(bv_);
- lt->selection.cursor = cursor;
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- } else
- bv_->cut(false);
- }
- break;
-
- case LFUN_BREAKPARAGRAPH:
- {
- LyXText * lt = bv_->getLyXText();
-
- beforeChange(lt);
- lt->breakParagraph(bv_, 0);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- lt->selection.cursor = lt->cursor;
- setState();
- owner_->showState();
- break;
- }
-
- case LFUN_BREAKPARAGRAPHKEEPLAYOUT:
- {
- LyXText * lt = bv_->getLyXText();
-
- beforeChange(lt);
- lt->breakParagraph(bv_, 1);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- lt->selection.cursor = lt->cursor;
- setState();
- owner_->showState();
- break;
- }
-
- case LFUN_BREAKPARAGRAPH_SKIP:
- {
- // When at the beginning of a paragraph, remove
- // indentation and add a "defskip" at the top.
- // Otherwise, do the same as LFUN_BREAKPARAGRAPH.
- LyXText * lt = bv_->getLyXText();
-
- LyXCursor cursor = lt->cursor;
-
- beforeChange(lt);
- if (cursor.pos() == 0) {
- if (cursor.par()->params().spaceTop() == VSpace(VSpace::NONE)) {
- lt->setParagraph
- (bv_,
- cursor.par()->params().lineTop(),
- cursor.par()->params().lineBottom(),
- cursor.par()->params().pagebreakTop(),
- cursor.par()->params().pagebreakBottom(),
- VSpace(VSpace::DEFSKIP), cursor.par()->params().spaceBottom(),
- cursor.par()->params().spacing(),
- cursor.par()->params().align(),
- cursor.par()->params().labelWidthString(), 1);
- //update(BufferView::SELECT|BufferView::FITCUR|BufferView::CHANGE);
- }
- }
- else {
- lt->breakParagraph(bv_, 0);
- //update(BufferView::SELECT|BufferView::FITCUR|BufferView::CHANGE);
- }
-
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- lt->selection.cursor = cursor;
- setState();
- owner_->showState();
- }
- break;
-
- case LFUN_PARAGRAPH_SPACING:
- {
- LyXText * lt = bv_->getLyXText();
-
- Paragraph * par = lt->cursor.par();
- Spacing::Space cur_spacing = par->params().spacing().getSpace();
- float cur_value = 1.0;
- if (cur_spacing == Spacing::Other) {
- cur_value = par->params().spacing().getValue();
- }
-
- istringstream istr(argument.c_str());
-
- string tmp;
- istr >> tmp;
- Spacing::Space new_spacing = cur_spacing;
- float new_value = cur_value;
- if (tmp.empty()) {
- lyxerr << "Missing argument to `paragraph-spacing'"
- << endl;
- } else if (tmp == "single") {
- new_spacing = Spacing::Single;
- } else if (tmp == "onehalf") {
- new_spacing = Spacing::Onehalf;
- } else if (tmp == "double") {
- new_spacing = Spacing::Double;
- } else if (tmp == "other") {
- new_spacing = Spacing::Other;
- float tmpval = 0.0;
- istr >> tmpval;
- lyxerr << "new_value = " << tmpval << endl;
- if (tmpval != 0.0)
- new_value = tmpval;
- } else if (tmp == "default") {
- new_spacing = Spacing::Default;
- } else {
- lyxerr << _("Unknown spacing argument: ")
- << argument << endl;
- }
- if (cur_spacing != new_spacing || cur_value != new_value) {
- par->params().spacing(Spacing(new_spacing, new_value));
- lt->redoParagraph(bv_);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- }
- break;
-
- case LFUN_INSET_TOGGLE:
- {
- LyXText * lt = bv_->getLyXText();
- hideCursor();
- beforeChange(lt);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- lt->toggleInset(bv_);
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- setState();
- }
- break;
-
- case LFUN_QUOTE:
- smartQuote();
- break;
-
- case LFUN_HTMLURL:
- case LFUN_URL:
- {
- InsetCommandParams p;
- if (action == LFUN_HTMLURL)
- p.setCmdName("htmlurl");
- else
- p.setCmdName("url");
- owner_->getDialogs()->createUrl(p.getAsString());
- }
- break;
-
- case LFUN_INSERT_URL:
- {
- InsetCommandParams p;
- p.setFromString(argument);
-
- InsetUrl * inset = new InsetUrl(p);
- if (!insertInset(inset))
- delete inset;
- else
- updateInset(inset, true);
- }
- break;
-
- case LFUN_INSET_ERT:
- insertAndEditInset(new InsetERT(buffer_->params));
- break;
-
- case LFUN_INSET_EXTERNAL:
- insertAndEditInset(new InsetExternal);
- break;
-
- case LFUN_INSET_FOOTNOTE:
- insertAndEditInset(new InsetFoot(buffer_->params));
- break;
-
- case LFUN_INSET_MARGINAL:
- insertAndEditInset(new InsetMarginal(buffer_->params));
- break;
-
- case LFUN_INSET_MINIPAGE:
- insertAndEditInset(new InsetMinipage(buffer_->params));
- break;
-
- case LFUN_INSERT_NOTE:
- insertAndEditInset(new InsetNote(buffer_->params));
- break;
-
- case LFUN_INSET_FLOAT:
- // check if the float type exist
- if (floatList.typeExist(argument)) {
- insertAndEditInset(new InsetFloat(buffer_->params,
- argument));
- } else {
- lyxerr << "Non-existent float type: "
- << argument << endl;
- }
- break;
-
- case LFUN_INSET_WIDE_FLOAT:
- // check if the float type exist
- if (floatList.typeExist(argument)) {
- InsetFloat * new_inset =
- new InsetFloat(buffer_->params, argument);
- new_inset->wide(true);
- insertAndEditInset(new_inset);
- } else {
- lyxerr << "Non-existent float type: "
- << argument << endl;
- }
- break;
-
-#if 0
- case LFUN_INSET_LIST:
- insertAndEditInset(new InsetList);
- break;
-
- case LFUN_INSET_THEOREM:
- insertAndEditInset(new InsetTheorem);
- break;
-#endif
-
- case LFUN_INSET_CAPTION:
- {
- // Do we have a locking inset...
- if (bv_->theLockingInset()) {
- lyxerr << "Locking inset code: "
- << static_cast<int>(bv_->theLockingInset()->lyxCode());
- InsetCaption * new_inset =
- new InsetCaption(buffer_->params);
- new_inset->setOwner(bv_->theLockingInset());
- new_inset->setAutoBreakRows(true);
- new_inset->setDrawFrame(0, InsetText::LOCKED);
- new_inset->setFrameColor(0, LColor::captionframe);
- if (insertInset(new_inset))
- new_inset->edit(bv_);
- else
- delete new_inset;
- }
- }
- break;
-
- case LFUN_INSET_TABULAR:
- {
- int r = 2;
- int c = 2;
- if (!argument.empty())
- ::sscanf(argument.c_str(),"%d%d", &r, &c);
- InsetTabular * new_inset =
- new InsetTabular(*buffer_, r, c);
- bool const rtl =
- bv_->getLyXText()->real_current_font.isRightToLeft();
- if (!open_new_inset(new_inset, rtl))
- delete new_inset;
- }
- break;
-
- // --- lyxserver commands ----------------------------
-
- case LFUN_CHARATCURSOR:
- {
- pos_type pos = bv_->getLyXText()->cursor.pos();
- if (pos < bv_->getLyXText()->cursor.par()->size())
- owner_->getLyXFunc()->setMessage(
- tostr(bv_->getLyXText()->cursor.par()->getChar(pos)));
- else
- owner_->getLyXFunc()->setMessage("EOF");
- }
- break;
-
- case LFUN_GETXY:
- owner_->getLyXFunc()->setMessage(tostr(bv_->getLyXText()->cursor.x())
- + ' '
- + tostr(bv_->getLyXText()->cursor.y()));
- break;
-
- case LFUN_SETXY:
- {
- int x = 0;
- int y = 0;
- if (::sscanf(argument.c_str(), " %d %d", &x, &y) != 2) {
- lyxerr << "SETXY: Could not parse coordinates in '"
- << argument << std::endl;
- }
- bv_->getLyXText()->setCursorFromCoordinates(bv_, x, y);
- }
- break;
-
- case LFUN_GETLAYOUT:
- owner_->getLyXFunc()->setMessage(tostr(bv_->getLyXText()->cursor.par()->layout()));
- break;
-
- case LFUN_GETFONT:
- {
- LyXFont & font = bv_->getLyXText()->current_font;
- if (font.shape() == LyXFont::ITALIC_SHAPE)
- owner_->getLyXFunc()->setMessage("E");
- else if (font.shape() == LyXFont::SMALLCAPS_SHAPE)
- owner_->getLyXFunc()->setMessage("N");
- else
- owner_->getLyXFunc()->setMessage("0");
-
- }
- break;
-
- // --- accented characters ---------------------------
+ // --- accented characters ---------------------------
case LFUN_UMLAUT:
case LFUN_CIRCUMFLEX:
case LFUN_HUNG_UMLAUT:
case LFUN_CIRCLE:
case LFUN_OGONEK:
- if (argument.empty()) {
+ if (ev.argument.empty()) {
// As always...
- owner_->getLyXFunc()->handleKeyFunc(action);
+ owner_->getLyXFunc().handleKeyFunc(ev.action);
} else {
- owner_->getLyXFunc()->handleKeyFunc(action);
- owner_->getIntl()->getTransManager()
- .TranslateAndInsert(argument[0], bv_->getLyXText());
+ owner_->getLyXFunc().handleKeyFunc(ev.action);
+ owner_->getIntl().getTransManager()
+ .TranslateAndInsert(ev.argument[0], bv_->getLyXText());
update(bv_->getLyXText(),
BufferView::SELECT
| BufferView::FITCUR
}
break;
- case LFUN_MATH:
- mathDispatch(bv_, argument);
- break;
-
case LFUN_MATH_MACRO:
- mathDispatchMathMacro(bv_, argument);
- break;
-
case LFUN_MATH_DELIM:
- mathDispatchMathDelim(bv_, argument);
- break;
-
case LFUN_INSERT_MATRIX:
- mathDispatchInsertMatrix(bv_, argument);
- break;
-
case LFUN_INSERT_MATH:
- mathDispatchInsertMath(bv_, argument);
- break;
-
case LFUN_MATH_IMPORT_SELECTION: // Imports LaTeX from the X selection
- mathDispatchMathImportSelection(bv_, argument);
- break;
-
case LFUN_MATH_DISPLAY: // Open or create a displayed math inset
- mathDispatchMathDisplay(bv_, argument);
- break;
-
case LFUN_MATH_MODE: // Open or create an inlined math inset
- mathDispatchMathMode(bv_, argument);
- break;
-
case LFUN_GREEK: // Insert a single greek letter
- mathDispatchGreek(bv_, argument);
+ mathDispatch(FuncRequest(bv_, ev.action, ev.argument));
break;
case LFUN_CITATION_INSERT:
{
InsetCommandParams p;
- p.setFromString(argument);
+ p.setFromString(ev.argument);
InsetCitation * inset = new InsetCitation(p);
if (!insertInset(inset))
// ale970405+lasgoutt970425
// The argument can be up to two tokens separated
// by a space. The first one is the bibstyle.
- string const db = token(argument, ' ', 0);
- string const bibstyle = token(argument, ' ', 1);
+ string const db = token(ev.argument, ' ', 0);
+ string bibstyle = token(ev.argument, ' ', 1);
+ if (bibstyle.empty())
+ bibstyle = "plain";
InsetCommandParams p("BibTeX", db, bibstyle);
InsetBibtex * inset = new InsetBibtex(p);
if (insertInset(inset)) {
- if (argument.empty())
+ if (ev.argument.empty())
inset->edit(bv_);
} else
delete inset;
InsetBibtex * inset =
static_cast<InsetBibtex*>(getInsetByCode(Inset::BIBTEX_CODE));
if (inset) {
- inset->addDatabase(argument);
+ inset->addDatabase(ev.argument);
}
}
break;
InsetBibtex * inset =
static_cast<InsetBibtex*>(getInsetByCode(Inset::BIBTEX_CODE));
if (inset) {
- inset->delDatabase(argument);
+ inset->delDatabase(ev.argument);
}
}
break;
InsetBibtex * inset =
static_cast<InsetBibtex*>(getInsetByCode(Inset::BIBTEX_CODE));
if (inset) {
- inset->setOptions(argument);
+ inset->setOptions(ev.argument);
}
}
break;
- case LFUN_INDEX_CREATE:
+ case LFUN_INDEX_INSERT:
{
- InsetCommandParams p("index");
- if (argument.empty()) {
- string const idxstring(bv_->getLyXText()->getStringToIndex(bv_));
- p.setContents(idxstring);
- } else {
- p.setContents(argument);
- }
+ string entry = ev.argument;
+ if (entry.empty())
+ entry = bv_->getLyXText()->getStringToIndex(bv_);
- owner_->getDialogs()->createIndex(p.getAsString());
- }
- break;
+ if (entry.empty()) {
+ owner_->getDialogs().createIndex();
+ break;
+ }
- case LFUN_INDEX_INSERT:
- {
- InsetCommandParams p;
- p.setFromString(argument);
- InsetIndex * inset = new InsetIndex(p);
+ InsetIndex * inset = new InsetIndex(InsetCommandParams("index", entry));
- if (!insertInset(inset))
+ if (!insertInset(inset)) {
delete inset;
- else
+ } else {
updateInset(inset, true);
- }
- break;
-
- case LFUN_INDEX_INSERT_LAST:
- {
- string const idxstring(bv_->getLyXText()->getStringToIndex(bv_));
- if (!idxstring.empty()) {
- owner_->message(_("Word `")
- + idxstring + _(("' indexed.")));
- InsetCommandParams p("index", idxstring);
- InsetIndex * inset = new InsetIndex(p);
-
- if (!insertInset(inset))
- delete inset;
- else
- updateInset(inset, true);
}
}
break;
case LFUN_PARENTINSERT:
{
- InsetCommandParams p("lyxparent", argument);
+ InsetCommandParams p("lyxparent", ev.argument);
Inset * inset = new InsetParent(p, *buffer_);
if (!insertInset(inset, tclass.defaultLayoutName()))
delete inset;
case LFUN_CHILD_INSERT:
{
InsetInclude::Params p;
- p.cparams.setFromString(argument);
+ p.cparams.setFromString(ev.argument);
p.masterFilename_ = buffer_->fileName();
InsetInclude * inset = new InsetInclude(p);
delete inset;
else {
updateInset(inset, true);
- bv_->owner()->getDialogs()->showInclude(inset);
+ bv_->owner()->getDialogs().showInclude(inset);
}
}
break;
case LFUN_FLOAT_LIST:
- if (floatList.typeExist(argument)) {
- Inset * inset = new InsetFloatList(argument);
+ if (tclass.floats().typeExist(ev.argument)) {
+ Inset * inset = new InsetFloatList(ev.argument);
if (!insertInset(inset, tclass.defaultLayoutName()))
delete inset;
} else {
lyxerr << "Non-existent float type: "
- << argument << endl;
+ << ev.argument << endl;
}
break;
case LFUN_THESAURUS_ENTRY:
{
- string arg = argument;
+ string arg = ev.argument;
if (arg.empty()) {
arg = bv_->getLyXText()->selectionAsString(buffer_,
}
}
- bv_->owner()->getDialogs()->showThesaurus(arg);
+ bv_->owner()->getDialogs().showThesaurus(arg);
}
break;
- case LFUN_SELFINSERT:
- {
- if (argument.empty()) break;
-
- /* Automatically delete the currently selected
- * text and replace it with what is being
- * typed in now. Depends on lyxrc settings
- * "auto_region_delete", which defaults to
- * true (on). */
-
- LyXText * lt = bv_->getLyXText();
-
- if (lyxrc.auto_region_delete) {
- if (lt->selection.set()) {
- lt->cutSelection(bv_, false, false);
- bv_->update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
- workarea().haveSelection(false);
- }
-
- beforeChange(lt);
- LyXFont const old_font(lt->real_current_font);
-
- string::const_iterator cit = argument.begin();
- string::const_iterator end = argument.end();
- for (; cit != end; ++cit) {
- owner_->getIntl()->getTransManager().
- TranslateAndInsert(*cit, lt);
- }
-
- bv_->update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
-
- lt->selection.cursor = lt->cursor;
- moveCursorUpdate(false);
-
- // real_current_font.number can change so we need to
- // update the minibuffer
- if (old_font != lt->real_current_font)
- owner_->showState();
- //return string();
- }
- break;
-
- case LFUN_DATE_INSERT: // jdblair: date-insert cmd
- {
- time_t now_time_t = time(NULL);
- struct tm * now_tm = localtime(&now_time_t);
- setlocale(LC_TIME, "");
- string arg;
- if (!argument.empty())
- arg = argument;
- else
- arg = lyxrc.date_insert_format;
- char datetmp[32];
- int const datetmp_len =
- ::strftime(datetmp, 32, arg.c_str(), now_tm);
-
- LyXText * lt = bv_->getLyXText();
-
- for (int i = 0; i < datetmp_len; i++) {
- lt->insertChar(bv_, datetmp[i]);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
-
- lt->selection.cursor = lt->cursor;
- moveCursorUpdate(false);
- }
- break;
-
case LFUN_UNKNOWN_ACTION:
- owner_->getLyXFunc()->setErrorMessage(N_("Unknown function!"));
+ ev.errorMessage(N_("Unknown function!"));
break;
default:
- return false;
+ FuncRequest cmd = ev;
+ cmd.setView(bv_);
+ return bv_->getLyXText()->dispatch(cmd);
} // end of switch
return true;
}
-void BufferView::Pimpl::newline()
-{
- if (available()) {
- LyXText * lt = bv_->getLyXText();
- hideCursor();
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR);
- lt->insertChar(bv_, Paragraph::META_NEWLINE);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
-}
-
-
-void BufferView::Pimpl::hfill()
-{
- if (available()) {
- LyXText * lt = bv_->getLyXText();
- hideCursor();
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR);
- lt->insertChar(bv_, Paragraph::META_HFILL);
- update(lt,
- BufferView::SELECT
- | BufferView::FITCUR
- | BufferView::CHANGE);
- }
-}
-
-
-void BufferView::Pimpl::specialChar(InsetSpecialChar::Kind kind)
-{
- if (available()) {
- LyXText * lt = bv_->getLyXText();
-
- hideCursor();
- update(lt, BufferView::SELECT|BufferView::FITCUR);
- InsetSpecialChar * new_inset =
- new InsetSpecialChar(kind);
- if (!insertInset(new_inset))
- delete new_inset;
- else
- updateInset(new_inset, true);
- }
-}
-
-
-void BufferView::Pimpl::smartQuote()
-{
- LyXText const * lt = bv_->getLyXText();
- Paragraph const * par = lt->cursor.par();
- pos_type pos = lt->cursor.pos();
- char c;
-
- if (!pos
- || (par->isInset(pos - 1)
- && par->getInset(pos - 1)->isSpace()))
- c = ' ';
- else
- c = par->getChar(pos - 1);
-
-
- hideCursor();
-
- LyXLayout const & style =
- textclasslist[bv_->buffer()->params.textclass][par->layout()];
-
- if (style.pass_thru ||
- (!insertInset(new InsetQuotes(c, bv_->buffer()->params))))
- bv_->owner()->getLyXFunc()->dispatch(LFUN_SELFINSERT, "\"");
-}
-
-
-void BufferView::Pimpl::insertAndEditInset(Inset * inset)
-{
- if (insertInset(inset))
- inset->edit(bv_);
- else
- delete inset;
-}
-
-
-// Open and lock an updatable inset
-bool BufferView::Pimpl::open_new_inset(UpdatableInset * new_inset, bool behind)
-{
- LyXText * lt = bv_->getLyXText();
-
- beforeChange(lt);
- finishUndo();
- if (!insertInset(new_inset)) {
- delete new_inset;
- return false;
- }
- new_inset->edit(bv_, !behind);
- return true;
-}
-
-
bool BufferView::Pimpl::insertInset(Inset * inset, string const & lout)
{
// if we are in a locking inset we should try to insert the
bv_->text->breakParagraph(bv_);
update(bv_->text, BufferView::SELECT|BufferView::FITCUR|BufferView::CHANGE);
- if (bv_->text->cursor.par()->size()) {
+ if (!bv_->text->cursor.par()->empty()) {
bv_->text->cursorLeft(bv_);
bv_->text->breakParagraph(bv_);
string lres = lout;
LyXTextClass const & tclass =
- textclasslist[buffer_->params.textclass];
+ buffer_->params.getLyXTextClass();
bool hasLayout = tclass.hasLayout(lres);
string lay = tclass.defaultLayoutName();
// if yes do the update as always otherwise we have to update the
// toplevel inset where this inset is inside
Inset * tl_inset = inset;
- while(tl_inset->owner())
+ while (tl_inset->owner())
tl_inset = tl_inset->owner();
hideCursor();
if (tl_inset == inset) {
} else if (static_cast<UpdatableInset *>(tl_inset)
->updateInsetInInset(bv_, inset))
{
- if (bv_->text->updateInset(bv_, tl_inset)) {
- update();
- updateScrollbar();
- }
- }
-}
-
-
-void BufferView::Pimpl::gotoInset(vector<Inset::Code> const & codes,
- bool same_content)
-{
- if (!available()) return;
-
- hideCursor();
- beforeChange(bv_->text);
- update(bv_->text, BufferView::SELECT|BufferView::FITCUR);
-
- LyXCursor const & cursor = bv_->text->cursor;
-
- string contents;
- if (same_content &&
- cursor.par()->isInset(cursor.pos())) {
- Inset const * inset = cursor.par()->getInset(cursor.pos());
- if (find(codes.begin(), codes.end(), inset->lyxCode())
- != codes.end())
- contents =
- static_cast<InsetCommand const *>(inset)->getContents();
- }
-
-
- if (!bv_->text->gotoNextInset(bv_, codes, contents)) {
- if (bv_->text->cursor.pos()
- || bv_->text->cursor.par() != bv_->text->ownerParagraph()) {
- LyXCursor tmp = bv_->text->cursor;
- bv_->text->cursor.par(bv_->text->ownerParagraph());
- bv_->text->cursor.pos(0);
- if (!bv_->text->gotoNextInset(bv_, codes, contents)) {
- bv_->text->cursor = tmp;
- bv_->owner()->message(_("No more insets"));
- }
- } else {
- bv_->owner()->message(_("No more insets"));
+ if (bv_->text->updateInset(bv_, tl_inset)) {
+ update();
+ updateScrollbar();
}
}
- update(bv_->text, BufferView::SELECT|BufferView::FITCUR);
- bv_->text->selection.cursor = bv_->text->cursor;
-}
-
-
-void BufferView::Pimpl::gotoInset(Inset::Code code, bool same_content)
-{
- gotoInset(vector<Inset::Code>(1, code), same_content);
}