#include "Language.h"
#include "LaTeXFeatures.h"
#include "LayoutFile.h"
+#include "Length.h"
#include "Lexer.h"
#include "LyX.h"
#include "LyXAction.h"
#include "lyxfind.h"
-#include "LyXFunc.h"
#include "Layout.h"
#include "LyXRC.h"
#include "MetricsInfo.h"
#include "Paragraph.h"
#include "ParagraphParameters.h"
#include "ParIterator.h"
+#include "RowPainter.h"
#include "Session.h"
#include "Text.h"
#include "TextClass.h"
#include "TextMetrics.h"
#include "TexRow.h"
#include "TocBackend.h"
-#include "VSpace.h"
#include "WordLangTuple.h"
#include "insets/InsetBibtex.h"
+#include "insets/InsetCitation.h"
#include "insets/InsetCommand.h" // ChangeRefs
#include "insets/InsetExternal.h"
#include "insets/InsetGraphics.h"
+#include "insets/InsetNote.h"
#include "insets/InsetRef.h"
#include "insets/InsetText.h"
-#include "insets/InsetNote.h"
+
+#include "mathed/MathData.h"
#include "frontends/alert.h"
#include "frontends/Application.h"
#include "frontends/Painter.h"
#include "frontends/Selection.h"
-#include "graphics/Previews.h"
-
#include "support/convert.h"
#include "support/debug.h"
#include "support/ExceptionMessage.h"
#include "support/filetools.h"
#include "support/gettext.h"
+#include "support/lassert.h"
#include "support/lstrings.h"
#include "support/Package.h"
#include "support/types.h"
}
-bool findInset(DocIterator & dit, vector<InsetCode> const & codes,
- bool same_content);
-
+/// Note that comparing contents can only be used for InsetCommand
bool findNextInset(DocIterator & dit, vector<InsetCode> const & codes,
docstring const & contents)
{
while (tmpdit) {
Inset const * inset = tmpdit.nextInset();
- if (inset
- && std::find(codes.begin(), codes.end(), inset->lyxCode()) != codes.end()
- && (contents.empty() ||
- static_cast<InsetCommand const *>(inset)->getFirstNonOptParam() == contents)) {
- dit = tmpdit;
- return true;
+ if (inset) {
+ bool const valid_code = std::find(codes.begin(), codes.end(),
+ inset->lyxCode()) != codes.end();
+ InsetCommand const * ic = inset->asInsetCommand();
+ bool const same_or_no_contents = contents.empty()
+ || (ic && (ic->getFirstNonOptParam() == contents));
+
+ if (valid_code && same_or_no_contents) {
+ dit = tmpdit;
+ return true;
+ }
}
tmpdit.forwardInset();
}
/// Looks for next inset with one of the given codes.
+/// Note that same_content can only be used for InsetCommand
bool findInset(DocIterator & dit, vector<InsetCode> const & codes,
bool same_content)
{
if (!tmpdit)
return false;
- if (same_content) {
- Inset const * inset = tmpdit.nextInset();
- if (inset
- && std::find(codes.begin(), codes.end(), inset->lyxCode()) != codes.end()) {
- contents = static_cast<InsetCommand const *>(inset)->getFirstNonOptParam();
+ Inset const * inset = tmpdit.nextInset();
+ if (same_content && inset) {
+ InsetCommand const * ic = inset->asInsetCommand();
+ if (ic) {
+ bool const valid_code = std::find(codes.begin(), codes.end(),
+ ic->lyxCode()) != codes.end();
+ if (valid_code)
+ contents = ic->getFirstNonOptParam();
}
}
struct BufferView::Private
{
- Private(BufferView & bv): wh_(0), cursor_(bv),
+ Private(BufferView & bv) : update_strategy_(NoScreenUpdate),
+ wh_(0), cursor_(bv),
anchor_pit_(0), anchor_ypos_(0),
inlineCompletionUniqueChars_(0),
- last_inset_(0), bookmark_edit_position_(0), gui_(0)
- {}
+ last_inset_(0), clickable_inset_(false),
+ mouse_position_cache_(),
+ bookmark_edit_position_(-1), gui_(0),
+ horiz_scroll_offset_(0)
+ {
+ xsel_cache_.set = false;
+ }
///
ScrollbarParameters scrollbarParameters_;
/** kept to send setMouseHover(false).
* Not owned, so don't delete.
*/
- Inset * last_inset_;
+ Inset const * last_inset_;
+ /// are we hovering something that we can click
+ bool clickable_inset_;
+
+ /// position of the mouse at the time of the last mouse move
+ /// This is used to update the hovering status of inset in
+ /// cases where the buffer is scrolled, but the mouse didn't move.
+ Point mouse_position_cache_;
// cache for id of the paragraph which was edited the last time
int bookmark_edit_position_;
///
map<string, Inset *> edited_insets_;
+
+ /// When the row where the cursor lies is scrolled, this
+ /// contains the scroll offset
+ int horiz_scroll_offset_;
+ /// a slice pointing to the start of the row where the cursor
+ /// is (at last draw time)
+ CursorSlice current_row_slice_;
+ /// a slice pointing to the start of the row where cursor was
+ /// at previous draw event
+ CursorSlice last_row_slice_;
};
d->cursor_.resetAnchor();
d->cursor_.setCurrentFont();
- if (graphics::Previews::status() != LyXRC::PREVIEW_OFF)
- thePreviews().generateBufferPreviews(buffer_);
+ buffer_.updatePreviews();
}
fp.pos = d->cursor_.bottom().pos();
theSession().lastFilePos().save(buffer_.fileName(), fp);
+ if (d->last_inset_)
+ d->last_inset_->setMouseHover(this, false);
+
delete d;
}
}
-bool BufferView::fitCursor()
+bool BufferView::needsFitCursor() const
{
if (cursorStatus(d->cursor_) == CUR_INSIDE) {
frontend::FontMetrics const & fm =
theFontMetrics(d->cursor_.getFont().fontInfo());
int const asc = fm.maxAscent();
int const des = fm.maxDescent();
- Point const p = getPos(d->cursor_, d->cursor_.boundary());
+ Point const p = getPos(d->cursor_);
if (p.y_ - asc >= 0 && p.y_ + des < height_)
return false;
}
void BufferView::processUpdateFlags(Update::flags flags)
{
- // last_inset_ points to the last visited inset. This pointer may become
- // invalid because of keyboard editing. Since all such operations
- // causes screen update(), I reset last_inset_ to avoid such a problem.
- d->last_inset_ = 0;
// This is close to a hot-path.
- LYXERR(Debug::DEBUG, "BufferView::processUpdateFlags()"
+ LYXERR(Debug::PAINTING, "BufferView::processUpdateFlags()"
<< "[fitcursor = " << (flags & Update::FitCursor)
<< ", forceupdate = " << (flags & Update::Force)
<< ", singlepar = " << (flags & Update::SinglePar)
<< "] buffer: " << &buffer_);
+ // FIXME Does this really need doing here? It's done in updateBuffer, and
+ // if the Buffer doesn't need updating, then do the macros?
buffer_.updateMacros();
// Now do the first drawing step if needed. This consists on updating
// the CoordCache in updateMetrics().
// The second drawing step is done in WorkArea::redraw() if needed.
+ // FIXME: is this still true now that Buffer::changed() is used all over?
// Case when no explicit update is requested.
if (!flags) {
if (flags == Update::Decoration) {
d->update_strategy_ = DecorationUpdate;
- buffer_.changed();
+ buffer_.changed(false);
return;
}
if (flags == Update::FitCursor
|| flags == (Update::Decoration | Update::FitCursor)) {
// tell the frontend to update the screen if needed.
- if (fitCursor()) {
+ if (needsFitCursor()) {
showCursor();
return;
}
if (flags & Update::Decoration) {
d->update_strategy_ = DecorationUpdate;
- buffer_.changed();
+ buffer_.changed(false);
return;
}
- // no screen update is needed.
+ // no screen update is needed in principle, but this
+ // could change if cursor row needs horizontal scrolling.
d->update_strategy_ = NoScreenUpdate;
+ buffer_.changed(false);
return;
}
if (!(flags & Update::FitCursor)) {
// Nothing to do anymore. Trigger a redraw and return
- buffer_.changed();
+ buffer_.changed(false);
return;
}
// updateMetrics() does not update paragraph position
// This is done at draw() time. So we need a redraw!
- buffer_.changed();
+ buffer_.changed(false);
- if (fitCursor()) {
+ if (needsFitCursor()) {
// The cursor is off screen so ensure it is visible.
// refresh it:
showCursor();
}
+
+ updateHoveredInset();
}
d->scrollbarParameters_.page_step = height_;
Text & t = buffer_.text();
- TextMetrics & tm = d->text_metrics_[&t];
+ TextMetrics & tm = d->text_metrics_[&t];
LYXERR(Debug::GUI, " Updating scrollbar: height: "
<< t.paragraphs().size()
}
-docstring BufferView::contextMenu(int x, int y) const
+string BufferView::contextMenu(int x, int y) const
{
//If there is a selection, return the containing inset menu
if (d->cursor_.selection())
}
-void BufferView::scrollDocView(int value)
+void BufferView::scrollDocView(int value, bool update)
{
int const offset = value - d->scrollbarParameters_.position;
// If the offset is less than 2 screen height, prefer to scroll instead.
if (abs(offset) <= 2 * height_) {
d->anchor_ypos_ -= offset;
- updateMetrics();
- buffer_.changed();
+ buffer_.changed(true);
+ updateHoveredInset();
return;
}
// cut off at the top
if (value <= d->scrollbarParameters_.min) {
DocIterator dit = doc_iterator_begin(&buffer_);
- showCursor(dit);
+ showCursor(dit, false, update);
LYXERR(Debug::SCROLLING, "scroll to top");
return;
}
if (value >= d->scrollbarParameters_.max) {
DocIterator dit = doc_iterator_end(&buffer_);
dit.backwardPos();
- showCursor(dit);
+ showCursor(dit, false, update);
LYXERR(Debug::SCROLLING, "scroll to bottom");
return;
}
// It seems we didn't find the correct pit so stay on the safe side and
// scroll to bottom.
LYXERR0("scrolling position not found!");
- scrollDocView(d->scrollbarParameters_.max);
+ scrollDocView(d->scrollbarParameters_.max, update);
return;
}
DocIterator dit = doc_iterator_begin(&buffer_);
dit.pit() = i;
LYXERR(Debug::SCROLLING, "value = " << value << " -> scroll to pit " << i);
- showCursor(dit);
+ showCursor(dit, false, update);
}
newy = last;
break;
case CUR_INSIDE:
- int const y = getPos(oldcur, oldcur.boundary()).y_;
+ int const y = getPos(oldcur).y_;
newy = min(last, max(y, first));
- if (y == newy)
+ if (y == newy)
return;
}
// We reset the cursor because cursorStatus() does not
// work when the cursor is within mathed.
Cursor cur(*this);
- cur.reset(buffer_.inset());
+ cur.reset();
tm.setCursorFromCoordinates(cur, 0, newy);
// update the bufferview cursor and notify insets
// FIXME: Care about the d->cursor_ flags to redraw if needed
Cursor old = d->cursor_;
mouseSetCursor(cur);
- bool badcursor = notifyCursorLeavesOrEnters(old, d->cursor_);
+ // the DEPM call in mouseSetCursor() might have destroyed the
+ // paragraph the cursor is in.
+ bool badcursor = old.fixIfBroken();
+ badcursor |= notifyCursorLeavesOrEnters(old, d->cursor_);
if (badcursor)
d->cursor_.fixIfBroken();
}
return Change(Change::UNCHANGED);
DocIterator dit = d->cursor_.selectionBegin();
+ // The selected content might have been changed (see #7685)
+ while (dit.inMathed())
+ // Find enclosing text cursor
+ dit.pop_back();
return dit.paragraph().lookupChange(dit.pos());
}
// FIXME: This does not work within mathed!
CursorStatus BufferView::cursorStatus(DocIterator const & dit) const
{
- Point const p = getPos(dit, dit.boundary());
+ Point const p = getPos(dit);
if (p.y_ < 0)
return CUR_ABOVE;
if (p.y_ > workHeight())
// acturately locate a bookmark in a 'live' lyx session.
// pit and pos will be updated with bottom level pit/pos
// when lyx exits.
- theSession().bookmarks().save(
- buffer_.fileName(),
- d->cursor_.bottom().pit(),
- d->cursor_.bottom().pos(),
- d->cursor_.paragraph().id(),
- d->cursor_.pos(),
- idx
- );
- if (idx)
- // emit message signal.
- message(_("Save bookmark"));
+ if (!buffer_.isInternal()) {
+ theSession().bookmarks().save(
+ buffer_.fileName(),
+ d->cursor_.bottom().pit(),
+ d->cursor_.bottom().pos(),
+ d->cursor_.paragraph().id(),
+ d->cursor_.pos(),
+ idx
+ );
+ if (idx)
+ // emit message signal.
+ message(_("Save bookmark"));
+ }
}
// the bookmark.
if (bottom_pit < int(buffer_.paragraphs().size())) {
dit = doc_iterator_begin(&buffer_);
-
+
dit.pit() = bottom_pit;
dit.pos() = min(bottom_pos, dit.paragraph().size());
success = true;
// To center the screen on this new position we need the
// paragraph position which is computed at draw() time.
// So we need a redraw!
- buffer_.changed();
- if (fitCursor())
+ buffer_.changed(false);
+ if (needsFitCursor())
showCursor();
}
void BufferView::translateAndInsert(char_type c, Text * t, Cursor & cur)
{
- if (lyxrc.rtl_support) {
- if (d->cursor_.real_current_font.isRightToLeft()) {
- if (d->intl_.keymap == Intl::PRIMARY)
- d->intl_.keyMapSec();
- } else {
- if (d->intl_.keymap == Intl::SECONDARY)
- d->intl_.keyMapPrim();
- }
+ if (d->cursor_.real_current_font.isRightToLeft()) {
+ if (d->intl_.keymap == Intl::PRIMARY)
+ d->intl_.keyMapSec();
+ } else {
+ if (d->intl_.keymap == Intl::SECONDARY)
+ d->intl_.keyMapPrim();
}
d->intl_.getTransManager().translateAndInsert(c, t, cur);
void BufferView::recenter()
{
- showCursor(d->cursor_, true);
+ showCursor(d->cursor_, true, true);
}
void BufferView::showCursor()
{
- showCursor(d->cursor_, false);
+ showCursor(d->cursor_, false, true);
}
-void BufferView::showCursor(DocIterator const & dit, bool recenter)
+void BufferView::showCursor(DocIterator const & dit,
+ bool recenter, bool update)
{
- if (scrollToCursor(dit, recenter))
- buffer_.changed();
+ if (scrollToCursor(dit, recenter) && update) {
+ buffer_.changed(true);
+ updateHoveredInset();
+ }
}
void BufferView::scrollToCursor()
{
- scrollToCursor(d->cursor_, false);
+ if (scrollToCursor(d->cursor_, false)) {
+ buffer_.changed(true);
+ updateHoveredInset();
+ }
}
if (tm.contains(bot_pit)) {
ParagraphMetrics const & pm = tm.parMetrics(bot_pit);
- LASSERT(!pm.rows().empty(), /**/);
+ LBUFERR(!pm.rows().empty());
// FIXME: smooth scrolling doesn't work in mathed.
CursorSlice const & cs = dit.innerTextSlice();
- int offset = coordOffset(dit, dit.boundary()).y_;
+ int offset = coordOffset(dit).y_;
int ypos = pm.position() + offset;
Dimension const & row_dim =
pm.getRow(cs.pos(), dit.boundary()).dimension();
int scrolled = 0;
if (recenter)
scrolled = scroll(ypos - height_/2);
- else if (ypos - row_dim.ascent() < 0)
- scrolled = scrollUp(- ypos + row_dim.ascent());
- else if (ypos + row_dim.descent() > height_)
- scrolled = scrollDown(ypos - height_ + defaultRowHeight() );
- // else, nothing to do, the cursor is already visible so we just return.
- if (scrolled != 0) {
- updateMetrics();
- return true;
+ // We try to visualize the whole row, if the row height is larger than
+ // the screen height, we scroll to a heuristic value of height_ / 4.
+ // FIXME: This heuristic value should be replaced by a recursive search
+ // for a row in the inset that can be visualized completely.
+ else if (row_dim.height() > height_) {
+ if (ypos < defaultRowHeight())
+ scrolled = scroll(ypos - height_ / 4);
+ else if (ypos > height_ - defaultRowHeight())
+ scrolled = scroll(ypos - 3 * height_ / 4);
}
- return false;
+
+ // If the top part of the row falls of the screen, we scroll
+ // up to align the top of the row with the top of the screen.
+ else if (ypos - row_dim.ascent() < 0 && ypos < height_) {
+ int ynew = row_dim.ascent();
+ scrolled = scrollUp(ynew - ypos);
+ }
+
+ // If the bottom of the row falls of the screen, we scroll down.
+ else if (ypos + row_dim.descent() > height_ && ypos > 0) {
+ int ynew = height_ - row_dim.descent();
+ scrolled = scrollDown(ypos - ynew);
+ }
+
+ // else, nothing to do, the cursor is already visible so we just return.
+ return scrolled != 0;
}
// fix inline completion position
tm.redoParagraph(bot_pit);
ParagraphMetrics const & pm = tm.parMetrics(bot_pit);
- int offset = coordOffset(dit, dit.boundary()).y_;
+ int offset = coordOffset(dit).y_;
d->anchor_pit_ = bot_pit;
CursorSlice const & cs = dit.innerTextSlice();
else
d->anchor_ypos_ = defaultRowHeight() * 2;
- updateMetrics();
return true;
}
-void BufferView::updateLayout(DocumentClass const * const oldlayout)
+void BufferView::makeDocumentClass()
+{
+ DocumentClassConstPtr olddc = buffer_.params().documentClassPtr();
+ buffer_.params().makeDocumentClass();
+ updateDocumentClass(olddc);
+}
+
+
+void BufferView::updateDocumentClass(DocumentClassConstPtr olddc)
{
message(_("Converting document to new document class..."));
-
+
StableDocIterator backcur(d->cursor_);
ErrorList & el = buffer_.errorList("Class Switch");
cap::switchBetweenClasses(
- oldlayout, buffer_.params().documentClassPtr(),
+ olddc, buffer_.params().documentClassPtr(),
static_cast<InsetText &>(buffer_.inset()), el);
setCursor(backcur.asDocIterator(&buffer_));
buffer_.errors("Class Switch");
- buffer_.updateLabels();
}
-/** Return the change status at cursor position, taking in account the
+
+/** Return the change status at cursor position, taking into account the
* status at each level of the document iterator (a table in a deleted
* footnote is deleted).
* When \param outer is true, the top slice is not looked at.
}
-static bool getLocalStatus(Cursor cursor, FuncRequest const & cmd, FuncStatus & status)
-{
- // Try to fix cursor in case it is broken.
- cursor.fixIfBroken();
-
- // This is, of course, a mess. Better create a new doc iterator and use
- // this in Inset::getStatus. This might require an additional
- // BufferView * arg, though (which should be avoided)
- //Cursor safe = *this;
- bool res = false;
- for ( ; cursor.depth(); cursor.pop()) {
- //lyxerr << "\nCursor::getStatus: cmd: " << cmd << endl << *this << endl;
- LASSERT(cursor.idx() <= cursor.lastidx(), /**/);
- LASSERT(cursor.pit() <= cursor.lastpit(), /**/);
- LASSERT(cursor.pos() <= cursor.lastpos(), /**/);
-
- // The inset's getStatus() will return 'true' if it made
- // a definitive decision on whether it want to handle the
- // request or not. The result of this decision is put into
- // the 'status' parameter.
- if (cursor.inset().getStatus(cursor, cmd, status)) {
- res = true;
- break;
- }
- }
- return res;
-}
-
-
bool BufferView::getStatus(FuncRequest const & cmd, FuncStatus & flag)
{
+ FuncCode const act = cmd.action();
+
// Can we use a readonly buffer?
if (buffer_.isReadonly()
- && !lyxaction.funcHasFlag(cmd.action, LyXAction::ReadOnly)
- && !lyxaction.funcHasFlag(cmd.action, LyXAction::NoBuffer)) {
+ && !lyxaction.funcHasFlag(act, LyXAction::ReadOnly)
+ && !lyxaction.funcHasFlag(act, LyXAction::NoBuffer)) {
flag.message(from_utf8(N_("Document is read-only")));
flag.setEnabled(false);
return true;
}
+
// Are we in a DELETED change-tracking region?
if (lookupChangeType(d->cursor_, true) == Change::DELETED
- && !lyxaction.funcHasFlag(cmd.action, LyXAction::ReadOnly)
- && !lyxaction.funcHasFlag(cmd.action, LyXAction::NoBuffer)) {
+ && !lyxaction.funcHasFlag(act, LyXAction::ReadOnly)
+ && !lyxaction.funcHasFlag(act, LyXAction::NoBuffer)) {
flag.message(from_utf8(N_("This portion of the document is deleted.")));
flag.setEnabled(false);
return true;
Cursor & cur = d->cursor_;
- // Is this a function that acts on inset at point?
- Inset * inset = cur.nextInset();
- if (lyxaction.funcHasFlag(cmd.action, LyXAction::AtPoint)
- && inset && inset->getStatus(cur, cmd, flag))
- return true;
-
- if (getLocalStatus(cur, cmd, flag))
+ if (cur.getStatus(cmd, flag))
return true;
- switch (cmd.action) {
+ switch (act) {
- // FIXME: This is a bit problematic because we don't check is this is a
- // document BufferView or not for these LFUNs. We probably have to
+ // FIXME: This is a bit problematic because we don't check if this is
+ // a document BufferView or not for these LFUNs. We probably have to
// dispatch both to currentBufferView() and, if that fails,
- // to documentBufferView(); same as we do know for current Buffer and
- // document Buffer. Ideally those LFUN should go to Buffer as they*
+ // to documentBufferView(); same as we do now for current Buffer and
+ // document Buffer. Ideally those LFUN should go to Buffer as they
// operate on the full Buffer and the cursor is only needed either for
// an Undo record or to restore a cursor position. But we don't know
// how to do that inside Buffer of course.
break;
case LFUN_UNDO:
- flag.setEnabled(buffer_.undo().hasUndoStack());
+ // We do not use the LyXAction flag for readonly because Undo sets the
+ // buffer clean/dirty status by itself.
+ flag.setEnabled(!buffer_.isReadonly() && buffer_.undo().hasUndoStack());
break;
case LFUN_REDO:
- flag.setEnabled(buffer_.undo().hasRedoStack());
+ // We do not use the LyXAction flag for readonly because Redo sets the
+ // buffer clean/dirty status by itself.
+ flag.setEnabled(!buffer_.isReadonly() && buffer_.undo().hasRedoStack());
break;
- case LFUN_FILE_INSERT:
case LFUN_FILE_INSERT_PLAINTEXT_PARA:
- case LFUN_FILE_INSERT_PLAINTEXT:
+ case LFUN_FILE_INSERT_PLAINTEXT: {
+ docstring const fname = cmd.argument();
+ if (!FileName::isAbsolute(to_utf8(fname))) {
+ flag.message(_("Absolute filename expected."));
+ return false;
+ }
+ flag.setEnabled(cur.inTexted());
+ break;
+ }
+ case LFUN_FILE_INSERT:
case LFUN_BOOKMARK_SAVE:
// FIXME: Actually, these LFUNS should be moved to Text
flag.setEnabled(cur.inTexted());
case LFUN_FONT_STATE:
case LFUN_LABEL_INSERT:
case LFUN_INFO_INSERT:
- case LFUN_INSET_EDIT:
case LFUN_PARAGRAPH_GOTO:
case LFUN_NOTE_NEXT:
case LFUN_REFERENCE_NEXT:
case LFUN_WORD_FIND:
case LFUN_WORD_FIND_FORWARD:
case LFUN_WORD_FIND_BACKWARD:
- case LFUN_WORD_FINDADV:
case LFUN_WORD_REPLACE:
case LFUN_MARK_OFF:
case LFUN_MARK_ON:
case LFUN_SCREEN_SHOW_CURSOR:
case LFUN_BIBTEX_DATABASE_ADD:
case LFUN_BIBTEX_DATABASE_DEL:
- case LFUN_NOTES_MUTATE:
- case LFUN_ALL_INSETS_TOGGLE:
case LFUN_STATISTICS:
- case LFUN_BRANCH_ADD_INSERT:
case LFUN_KEYMAP_OFF:
case LFUN_KEYMAP_PRIMARY:
case LFUN_KEYMAP_SECONDARY:
case LFUN_KEYMAP_TOGGLE:
+ case LFUN_INSET_SELECT_ALL:
flag.setEnabled(true);
break;
- case LFUN_REGEXP_MODE:
- // FIXME: Test if current WorkArea is the search WorkArea
- flag.setEnabled(buffer().isInternal() && !cur.inRegexped());
- break;
-
- case LFUN_LABEL_COPY_AS_REF: {
- // if there is an inset at cursor, see whether it
- // handles the lfun
- Inset * inset = cur.nextInset();
- if (!inset || !inset->getStatus(cur, cmd, flag))
- flag.setEnabled(false);
- break;
- }
-
- case LFUN_NEXT_INSET_MODIFY: {
- // this is the real function we want to invoke
- FuncRequest tmpcmd = cmd;
- tmpcmd.action = LFUN_INSET_MODIFY;
- // if there is an inset at cursor, see whether it
- // handles the lfun, other start from scratch
- Inset * inset = cur.nextInset();
- if (!inset || !inset->getStatus(cur, tmpcmd, flag))
- flag = lyx::getStatus(tmpcmd);
+ case LFUN_WORD_FINDADV: {
+ FindAndReplaceOptions opt;
+ istringstream iss(to_utf8(cmd.argument()));
+ iss >> opt;
+ flag.setEnabled(opt.repl_buf_name.empty()
+ || !buffer_.isReadonly());
break;
}
- case LFUN_LABEL_GOTO: {
+ case LFUN_LABEL_GOTO:
flag.setEnabled(!cmd.argument().empty()
|| getInsetByCode<InsetRef>(cur, REF_CODE));
break;
- }
-
- case LFUN_CHANGES_TRACK:
- flag.setEnabled(true);
- flag.setOnOff(buffer_.params().trackChanges);
- break;
-
- case LFUN_CHANGES_OUTPUT:
- flag.setEnabled(true);
- flag.setOnOff(buffer_.params().outputChanges);
- break;
case LFUN_CHANGES_MERGE:
case LFUN_CHANGE_NEXT:
flag.setEnabled(true);
break;
- case LFUN_BUFFER_TOGGLE_COMPRESSION: {
- flag.setOnOff(buffer_.params().compressed);
- break;
- }
-
case LFUN_SCREEN_UP:
case LFUN_SCREEN_DOWN:
case LFUN_SCROLL:
case LFUN_SCREEN_UP_SELECT:
case LFUN_SCREEN_DOWN_SELECT:
+ case LFUN_INSET_FORALL:
flag.setEnabled(true);
break;
flag.setEnabled(cur.inset().allowParagraphCustomization(cur.idx()));
break;
+ case LFUN_BRANCH_ADD_INSERT:
+ flag.setEnabled(!(cur.inTexted() && cur.paragraph().isPassThru()));
+ break;
+
case LFUN_DIALOG_SHOW_NEW_INSET:
// FIXME: this is wrong, but I do not understand the
// intent (JMarc)
if (cur.inset().lyxCode() == CAPTION_CODE)
return cur.inset().getStatus(cur, cmd, flag);
// FIXME we should consider passthru paragraphs too.
- flag.setEnabled(!cur.inset().getLayout().isPassThru());
+ flag.setEnabled(!(cur.inTexted() && cur.paragraph().isPassThru()));
break;
case LFUN_CITATION_INSERT: {
Inset * inset = editedInset(name);
if (inset) {
FuncRequest fr(LFUN_INSET_MODIFY, cmd.argument());
- FuncStatus fs;
- if (!inset->getStatus(cur, fr, fs)) {
+ if (!inset->getStatus(cur, fr, flag)) {
// Every inset is supposed to handle this
LASSERT(false, break);
}
- flag |= fs;
} else {
FuncRequest fr(LFUN_INSET_INSERT, cmd.argument());
- flag |= lyx::getStatus(fr);
+ flag = lyx::getStatus(fr);
}
break;
}
default:
- flag.setEnabled(false);
return false;
}
}
-bool BufferView::dispatch(FuncRequest const & cmd)
+void BufferView::dispatch(FuncRequest const & cmd, DispatchResult & dr)
{
- //lyxerr << [ cmd = " << cmd << "]" << endl;
-
- // Make sure that the cached BufferView is correct.
- LYXERR(Debug::ACTION, " action[" << cmd.action << ']'
- << " arg[" << to_utf8(cmd.argument()) << ']'
- << " x[" << cmd.x << ']'
- << " y[" << cmd.y << ']'
- << " button[" << cmd.button() << ']');
+ LYXERR(Debug::ACTION, "BufferView::dispatch: cmd: " << cmd);
string const argument = to_utf8(cmd.argument());
Cursor & cur = d->cursor_;
+ Cursor old = cur;
// Don't dispatch function that does not apply to internal buffers.
- if (buffer_.isInternal() && lyxaction.funcHasFlag(cmd.action, LyXAction::NoInternal))
- return false;
+ if (buffer_.isInternal()
+ && lyxaction.funcHasFlag(cmd.action(), LyXAction::NoInternal))
+ return;
// We'll set this back to false if need be.
bool dispatched = true;
- if (cmd.action != LFUN_UNDO && cmd.action != LFUN_REDO)
- buffer_.undo().beginUndoGroup();
+ buffer_.undo().beginUndoGroup();
- switch (cmd.action) {
+ FuncCode const act = cmd.action();
+ switch (act) {
case LFUN_BUFFER_PARAMS_APPLY: {
- DocumentClass const * const oldClass = buffer_.params().documentClassPtr();
- cur.recordUndoFullDocument();
+ DocumentClassConstPtr olddc = buffer_.params().documentClassPtr();
+ cur.recordUndoBufferParams();
istringstream ss(to_utf8(cmd.argument()));
Lexer lex;
lex.setStream(ss);
<< unknown_tokens << " unknown token"
<< (unknown_tokens == 1 ? "" : "s"));
}
- updateLayout(oldClass);
-
+ updateDocumentClass(olddc);
+
// We are most certainly here because of a change in the document
// It is then better to make sure that all dialogs are in sync with
// current document settings.
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ dr.forceBufferUpdate();
break;
}
-
+
case LFUN_LAYOUT_MODULES_CLEAR: {
- DocumentClass const * const oldClass =
- buffer_.params().documentClassPtr();
- cur.recordUndoFullDocument();
+ // FIXME: this modifies the document in cap::switchBetweenClasses
+ // without calling recordUndo. Fix this before using
+ // recordUndoBufferParams().
+ cur.recordUndoFullBuffer();
buffer_.params().clearLayoutModules();
- buffer_.params().makeDocumentClass();
- updateLayout(oldClass);
- processUpdateFlags(Update::Force | Update::FitCursor);
+ makeDocumentClass();
+ dr.screenUpdate(Update::Force);
+ dr.forceBufferUpdate();
break;
}
case LFUN_LAYOUT_MODULE_ADD: {
BufferParams const & params = buffer_.params();
- if (!params.moduleCanBeAdded(argument)) {
- LYXERR0("Module `" << argument <<
+ if (!params.layoutModuleCanBeAdded(argument)) {
+ LYXERR0("Module `" << argument <<
"' cannot be added due to failed requirements or "
"conflicts with installed modules.");
break;
}
- DocumentClass const * const oldClass = params.documentClassPtr();
- cur.recordUndoFullDocument();
+ // FIXME: this modifies the document in cap::switchBetweenClasses
+ // without calling recordUndo. Fix this before using
+ // recordUndoBufferParams().
+ cur.recordUndoFullBuffer();
buffer_.params().addLayoutModule(argument);
- buffer_.params().makeDocumentClass();
- updateLayout(oldClass);
- processUpdateFlags(Update::Force | Update::FitCursor);
+ makeDocumentClass();
+ dr.screenUpdate(Update::Force);
+ dr.forceBufferUpdate();
break;
}
case LFUN_TEXTCLASS_APPLY: {
- if (!LayoutFileList::get().load(argument, buffer_.temppath()) &&
- !LayoutFileList::get().load(argument, buffer_.filePath()))
+ // since this shortcircuits, the second call is made only if
+ // the first fails
+ bool const success =
+ LayoutFileList::get().load(argument, buffer_.temppath()) ||
+ LayoutFileList::get().load(argument, buffer_.filePath());
+ if (!success) {
+ docstring s = bformat(_("The document class `%1$s' "
+ "could not be loaded."), from_utf8(argument));
+ frontend::Alert::error(_("Could not load class"), s);
break;
+ }
LayoutFile const * old_layout = buffer_.params().baseClass();
LayoutFile const * new_layout = &(LayoutFileList::get()[argument]);
// nothing to do
break;
- //Save the old, possibly modular, layout for use in conversion.
- DocumentClass const * const oldDocClass =
- buffer_.params().documentClassPtr();
- cur.recordUndoFullDocument();
+ // Save the old, possibly modular, layout for use in conversion.
+ // FIXME: this modifies the document in cap::switchBetweenClasses
+ // without calling recordUndo. Fix this before using
+ // recordUndoBufferParams().
+ cur.recordUndoFullBuffer();
buffer_.params().setBaseClass(argument);
- buffer_.params().makeDocumentClass();
- updateLayout(oldDocClass);
- processUpdateFlags(Update::Force | Update::FitCursor);
+ makeDocumentClass();
+ dr.screenUpdate(Update::Force);
+ dr.forceBufferUpdate();
+ break;
+ }
+
+ case LFUN_TEXTCLASS_LOAD: {
+ // since this shortcircuits, the second call is made only if
+ // the first fails
+ bool const success =
+ LayoutFileList::get().load(argument, buffer_.temppath()) ||
+ LayoutFileList::get().load(argument, buffer_.filePath());
+ if (!success) {
+ docstring s = bformat(_("The document class `%1$s' "
+ "could not be loaded."), from_utf8(argument));
+ frontend::Alert::error(_("Could not load class"), s);
+ }
break;
}
- case LFUN_TEXTCLASS_LOAD:
- LayoutFileList::get().load(argument, buffer_.temppath()) ||
- LayoutFileList::get().load(argument, buffer_.filePath());
- break;
-
case LFUN_LAYOUT_RELOAD: {
- DocumentClass const * const oldClass = buffer_.params().documentClassPtr();
LayoutFileIndex bc = buffer_.params().baseClassID();
LayoutFileList::get().reset(bc);
buffer_.params().setBaseClass(bc);
- buffer_.params().makeDocumentClass();
- updateLayout(oldClass);
- processUpdateFlags(Update::Force | Update::FitCursor);
+ makeDocumentClass();
+ dr.screenUpdate(Update::Force);
+ dr.forceBufferUpdate();
break;
}
case LFUN_UNDO:
- cur.message(_("Undo"));
+ dr.setMessage(_("Undo"));
cur.clearSelection();
if (!cur.textUndo())
- cur.message(_("No further undo information"));
+ dr.setMessage(_("No further undo information"));
else
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ dr.forceBufferUpdate();
break;
case LFUN_REDO:
- cur.message(_("Redo"));
+ dr.setMessage(_("Redo"));
cur.clearSelection();
if (!cur.textRedo())
- cur.message(_("No further redo information"));
+ dr.setMessage(_("No further redo information"));
else
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ dr.forceBufferUpdate();
break;
case LFUN_FONT_STATE:
- cur.message(cur.currentState());
+ dr.setMessage(cur.currentState());
break;
case LFUN_BOOKMARK_SAVE:
saveBookmark(0);
}
}
- if (!label.empty())
+ if (!label.empty()) {
gotoLabel(label);
- break;
- }
-
- case LFUN_INSET_EDIT: {
- FuncRequest fr(cmd);
- // if there is an inset at cursor, see whether it
- // can be modified.
- Inset * inset = cur.nextInset();
- if (inset)
- inset->dispatch(cur, fr);
- // if it did not work, try the underlying inset.
- if (!inset || !cur.result().dispatched())
- cur.dispatch(cmd);
-
- // FIXME I'm adding the last break to solve a crash,
- // but that is obviously not right.
- if (!cur.result().dispatched())
- // It did not work too; no action needed.
- break;
+ // at the moment, this is redundant, since gotoLabel will
+ // eventually call LFUN_PARAGRAPH_GOTO, but it seems best
+ // to have it here.
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ }
break;
}
for (Buffer * b = &buffer_; i == 0 || b != &buffer_;
b = theBufferList().next(b)) {
- DocIterator dit = b->getParFromID(id);
- if (dit.atEnd()) {
+ Cursor cur(*this);
+ cur.setCursor(b->getParFromID(id));
+ if (cur.atEnd()) {
LYXERR(Debug::INFO, "No matching paragraph found! [" << id << "].");
++i;
continue;
}
- LYXERR(Debug::INFO, "Paragraph " << dit.paragraph().id()
+ LYXERR(Debug::INFO, "Paragraph " << cur.paragraph().id()
<< " found in buffer `"
<< b->absFileName() << "'.");
if (b == &buffer_) {
// Set the cursor
- dit.pos() = pos;
- setCursor(dit);
- processUpdateFlags(Update::Force | Update::FitCursor);
+ cur.pos() = pos;
+ mouseSetCursor(cur);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
} else {
// Switch to other buffer view and resend cmd
- theLyXFunc().dispatch(FuncRequest(
+ lyx::dispatch(FuncRequest(
LFUN_BUFFER_SWITCH, b->absFileName()));
- theLyXFunc().dispatch(cmd);
+ lyx::dispatch(cmd);
}
break;
}
break;
}
- case LFUN_CHANGES_TRACK:
- buffer_.params().trackChanges = !buffer_.params().trackChanges;
- break;
-
- case LFUN_CHANGES_OUTPUT:
- buffer_.params().outputChanges = !buffer_.params().outputChanges;
- if (buffer_.params().outputChanges) {
- bool dvipost = LaTeXFeatures::isAvailable("dvipost");
- bool xcolorulem = LaTeXFeatures::isAvailable("ulem") &&
- LaTeXFeatures::isAvailable("xcolor");
-
- if (!dvipost && !xcolorulem) {
- Alert::warning(_("Changes not shown in LaTeX output"),
- _("Changes will not be highlighted in LaTeX output, "
- "because neither dvipost nor xcolor/ulem are installed.\n"
- "Please install these packages or redefine "
- "\\lyxadded and \\lyxdeleted in the LaTeX preamble."));
- } else if (!xcolorulem) {
- Alert::warning(_("Changes not shown in LaTeX output"),
- _("Changes will not be highlighted in LaTeX output "
- "when using pdflatex, because xcolor and ulem are not installed.\n"
- "Please install both packages or redefine "
- "\\lyxadded and \\lyxdeleted in the LaTeX preamble."));
- }
- }
- break;
-
case LFUN_CHANGE_NEXT:
findNextChange(this);
// FIXME: Move this LFUN to Buffer so that we don't have to do this:
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
break;
-
+
case LFUN_CHANGE_PREVIOUS:
findPreviousChange(this);
// FIXME: Move this LFUN to Buffer so that we don't have to do this:
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
break;
case LFUN_CHANGES_MERGE:
if (findNextChange(this) || findPreviousChange(this)) {
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ dr.forceBufferUpdate();
showDialog("changes");
}
break;
case LFUN_ALL_CHANGES_ACCEPT:
// select complete document
- cur.reset(buffer_.inset());
+ cur.reset();
cur.selHandle(true);
buffer_.text().cursorBottom(cur);
// accept everything in a single step to support atomic undo
buffer_.text().acceptOrRejectChanges(cur, Text::ACCEPT);
+ cur.resetAnchor();
// FIXME: Move this LFUN to Buffer so that we don't have to do this:
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ dr.forceBufferUpdate();
break;
case LFUN_ALL_CHANGES_REJECT:
// select complete document
- cur.reset(buffer_.inset());
+ cur.reset();
cur.selHandle(true);
buffer_.text().cursorBottom(cur);
// reject everything in a single step to support atomic undo
// Note: reject does not work recursively; the user may have to repeat the operation
buffer_.text().acceptOrRejectChanges(cur, Text::REJECT);
+ cur.resetAnchor();
// FIXME: Move this LFUN to Buffer so that we don't have to do this:
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ dr.forceBufferUpdate();
break;
case LFUN_WORD_FIND_FORWARD:
case LFUN_WORD_FIND_BACKWARD: {
+ // FIXME THREAD
+ // Would it maybe be better if this variable were view specific anyway?
static docstring last_search;
docstring searched_string;
if (searched_string.empty())
break;
- bool const fw = cmd.action == LFUN_WORD_FIND_FORWARD;
+ bool const fw = act == LFUN_WORD_FIND_FORWARD;
docstring const data =
find2string(searched_string, true, false, fw);
- find(this, FuncRequest(LFUN_WORD_FIND, data));
+ bool found = lyxfind(this, FuncRequest(LFUN_WORD_FIND, data));
+ if (found) {
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ cur.dispatched();
+ dispatched = true;
+ } else {
+ cur.undispatched();
+ dispatched = false;
+ }
break;
}
if (cmd.argument().empty() && !d->search_request_cache_.argument().empty())
req = d->search_request_cache_;
if (req.argument().empty()) {
- theLyXFunc().dispatch(FuncRequest(LFUN_DIALOG_SHOW, "findreplace"));
+ lyx::dispatch(FuncRequest(LFUN_DIALOG_SHOW, "findreplace"));
break;
}
- if (find(this, req))
- showCursor();
- else
- message(_("String not found!"));
+ if (lyxfind(this, req)) {
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ cur.dispatched();
+ dispatched = true;
+ } else {
+ cur.undispatched();
+ dispatched = false;
+ }
d->search_request_cache_ = req;
break;
}
DocIterator end = cur.selectionEnd();
if (beg.pit() == end.pit()) {
for (pos_type p = beg.pos() ; p < end.pos() ; ++p) {
- if (cur.paragraph().isDeleted(p))
+ if (!cur.inMathed() && cur.paragraph().isDeleted(p)) {
has_deleted = true;
+ break;
+ }
}
}
}
- replace(this, cmd, has_deleted);
+ if (lyxreplace(this, cmd, has_deleted)) {
+ dr.forceBufferUpdate();
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ cur.dispatched();
+ dispatched = true;
+ } else {
+ cur.undispatched();
+ dispatched = false;
+ }
break;
}
- case LFUN_WORD_FINDADV:
- findAdv(this, cmd);
+ case LFUN_WORD_FINDADV: {
+ FindAndReplaceOptions opt;
+ istringstream iss(to_utf8(cmd.argument()));
+ iss >> opt;
+ if (findAdv(this, opt)) {
+ dr.screenUpdate(Update::Force | Update::FitCursor);
+ cur.dispatched();
+ dispatched = true;
+ } else {
+ cur.undispatched();
+ dispatched = false;
+ }
break;
+ }
case LFUN_MARK_OFF:
cur.clearSelection();
- cur.message(from_utf8(N_("Mark off")));
+ dr.setMessage(from_utf8(N_("Mark off")));
break;
case LFUN_MARK_ON:
cur.clearSelection();
cur.setMark(true);
- cur.message(from_utf8(N_("Mark on")));
+ dr.setMessage(from_utf8(N_("Mark on")));
break;
case LFUN_MARK_TOGGLE:
cur.setSelection(false);
if (cur.mark()) {
cur.setMark(false);
- cur.message(from_utf8(N_("Mark removed")));
+ dr.setMessage(from_utf8(N_("Mark removed")));
} else {
cur.setMark(true);
- cur.message(from_utf8(N_("Mark set")));
+ dr.setMessage(from_utf8(N_("Mark set")));
}
cur.resetAnchor();
break;
case LFUN_SCREEN_SHOW_CURSOR:
showCursor();
break;
-
+
case LFUN_SCREEN_RECENTER:
recenter();
break;
InsetBibtex * inset = getInsetByCode<InsetBibtex>(tmpcur,
BIBTEX_CODE);
if (inset) {
- if (inset->addDatabase(cmd.argument()))
- buffer_.updateBibfilesCache();
+ if (inset->addDatabase(cmd.argument())) {
+ buffer_.invalidateBibfileCache();
+ dr.forceBufferUpdate();
+ }
}
break;
}
InsetBibtex * inset = getInsetByCode<InsetBibtex>(tmpcur,
BIBTEX_CODE);
if (inset) {
- if (inset->delDatabase(cmd.argument()))
- buffer_.updateBibfilesCache();
+ if (inset->delDatabase(cmd.argument())) {
+ buffer_.invalidateBibfileCache();
+ dr.forceBufferUpdate();
+ }
}
break;
}
from = doc_iterator_begin(&buffer_);
to = doc_iterator_end(&buffer_);
}
- int const words = countWords(from, to);
- int const chars = countChars(from, to, false);
- int const chars_blanks = countChars(from, to, true);
+ buffer_.updateStatistics(from, to);
+ int const words = buffer_.wordCount();
+ int const chars = buffer_.charCount(false);
+ int const chars_blanks = buffer_.charCount(true);
docstring message;
if (cur.selection())
message = _("Statistics for the selection:");
}
break;
- case LFUN_BUFFER_TOGGLE_COMPRESSION:
- // turn compression on/off
- buffer_.params().compressed = !buffer_.params().compressed;
- break;
-
- case LFUN_LABEL_COPY_AS_REF: {
- // if there is an inset at cursor, try to copy it
- Inset * inset = &cur.inset();
- if (!inset || !inset->asInsetMath())
- inset = cur.nextInset();
- if (inset) {
- FuncRequest tmpcmd = cmd;
- inset->dispatch(cur, tmpcmd);
- }
- if (!cur.result().dispatched())
- // It did not work too; no action needed.
- break;
- cur.clearSelection();
- processUpdateFlags(Update::SinglePar | Update::FitCursor);
- break;
- }
-
- case LFUN_NEXT_INSET_MODIFY: {
- // create the the real function we want to invoke
- FuncRequest tmpcmd = cmd;
- tmpcmd.action = LFUN_INSET_MODIFY;
- // if there is an inset at cursor, see whether it
- // can be modified.
- Inset * inset = cur.nextInset();
- if (inset) {
- cur.recordUndo();
- inset->dispatch(cur, tmpcmd);
- }
- // if it did not work, try the underlying inset.
- if (!inset || !cur.result().dispatched()) {
- cur.recordUndo();
- cur.dispatch(tmpcmd);
- }
-
- if (!cur.result().dispatched())
- // It did not work too; no action needed.
- break;
- cur.clearSelection();
- processUpdateFlags(Update::Force | Update::FitCursor);
- break;
- }
-
case LFUN_SCREEN_UP:
case LFUN_SCREEN_DOWN: {
- Point p = getPos(cur, cur.boundary());
+ Point p = getPos(cur);
// This code has been commented out to enable to scroll down a
// document, even if there are large insets in it (see bug #5465).
/*if (p.y_ < 0 || p.y_ > height_) {
// The cursor is off-screen so recenter before proceeding.
showCursor();
- p = getPos(cur, cur.boundary());
+ p = getPos(cur);
}*/
- int const scrolled = scroll(cmd.action == LFUN_SCREEN_UP
+ int const scrolled = scroll(act == LFUN_SCREEN_UP
? -height_ : height_);
- if (cmd.action == LFUN_SCREEN_UP && scrolled > -height_)
+ if (act == LFUN_SCREEN_UP && scrolled > -height_)
p = Point(0, 0);
- if (cmd.action == LFUN_SCREEN_DOWN && scrolled < height_)
+ if (act == LFUN_SCREEN_DOWN && scrolled < height_)
p = Point(width_, height_);
- Cursor old = cur;
bool const in_texted = cur.inTexted();
- cur.reset(buffer_.inset());
- updateMetrics();
- buffer_.changed();
+ cur.setCursor(doc_iterator_begin(cur.buffer()));
+ cur.selHandle(false);
+ buffer_.changed(true);
+ updateHoveredInset();
+
d->text_metrics_[&buffer_.text()].editXY(cur, p.x_, p.y_,
- true, cmd.action == LFUN_SCREEN_UP);
+ true, act == LFUN_SCREEN_UP);
//FIXME: what to do with cur.x_target()?
bool update = in_texted && cur.bv().checkDepm(cur, old);
cur.finishUndo();
+
+ if (update || cur.mark())
+ dr.screenUpdate(Update::Force | Update::FitCursor);
if (update)
- processUpdateFlags(Update::Force | Update::FitCursor);
+ dr.forceBufferUpdate();
break;
}
- case LFUN_SCROLL:
- lfunScroll(cmd);
+ case LFUN_SCROLL: {
+ string const scroll_type = cmd.getArg(0);
+ int scroll_step = 0;
+ if (scroll_type == "line")
+ scroll_step = d->scrollbarParameters_.single_step;
+ else if (scroll_type == "page")
+ scroll_step = d->scrollbarParameters_.page_step;
+ else
+ return;
+ string const scroll_quantity = cmd.getArg(1);
+ if (scroll_quantity == "up")
+ scrollUp(scroll_step);
+ else if (scroll_quantity == "down")
+ scrollDown(scroll_step);
+ else {
+ int const scroll_value = convert<int>(scroll_quantity);
+ if (scroll_value)
+ scroll(scroll_step * scroll_value);
+ }
+ buffer_.changed(true);
+ updateHoveredInset();
+ dr.forceBufferUpdate();
break;
+ }
case LFUN_SCREEN_UP_SELECT: {
+ // FIXME: why is the algorithm different from LFUN_SCREEN_UP?
cur.selHandle(true);
if (isTopScreen()) {
lyx::dispatch(FuncRequest(LFUN_BUFFER_BEGIN_SELECT));
cur.finishUndo();
break;
}
- int y = getPos(cur, cur.boundary()).y_;
+ int y = getPos(cur).y_;
int const ymin = y - height_ + defaultRowHeight();
while (y > ymin && cur.up())
- y = getPos(cur, cur.boundary()).y_;
+ y = getPos(cur).y_;
cur.finishUndo();
- processUpdateFlags(Update::SinglePar | Update::FitCursor);
+ dr.screenUpdate(Update::SinglePar | Update::FitCursor);
break;
}
case LFUN_SCREEN_DOWN_SELECT: {
+ // FIXME: why is the algorithm different from LFUN_SCREEN_DOWN?
cur.selHandle(true);
if (isBottomScreen()) {
lyx::dispatch(FuncRequest(LFUN_BUFFER_END_SELECT));
cur.finishUndo();
break;
}
- int y = getPos(cur, cur.boundary()).y_;
+ int y = getPos(cur).y_;
int const ymax = y + height_ - defaultRowHeight();
while (y < ymax && cur.down())
- y = getPos(cur, cur.boundary()).y_;
+ y = getPos(cur).y_;
cur.finishUndo();
- processUpdateFlags(Update::SinglePar | Update::FitCursor);
- break;
- }
-
- // This could be rewriten using some command like forall <insetname> <command>
- // once the insets refactoring is done.
- case LFUN_NOTES_MUTATE: {
- if (cmd.argument().empty())
- break;
-
- if (mutateNotes(cur, cmd.getArg(0), cmd.getArg(1))) {
- processUpdateFlags(Update::Force);
+ dr.screenUpdate(Update::SinglePar | Update::FitCursor);
+ break;
+ }
+
+
+ case LFUN_INSET_SELECT_ALL:
+ if (cur.depth() > 1
+ && cur.selBegin().at_begin()
+ && cur.selEnd().at_end()) {
+ // All the contents of the inset if selected.
+ // Select the inset from outside.
+ cur.pop();
+ cur.resetAnchor();
+ cur.setSelection(true);
+ cur.posForward();
+ } else if (cur.selBegin().idx() != cur.selEnd().idx()
+ || (cur.depth() > 1
+ && cur.selBegin().at_cell_begin()
+ && cur.selEnd().at_cell_end())) {
+ // At least one complete cell is selected.
+ // Select all cells
+ cur.idx() = 0;
+ cur.pos() = 0;
+ cur.resetAnchor();
+ cur.setSelection(true);
+ cur.idx() = cur.lastidx();
+ cur.pos() = cur.lastpos();
+ } else {
+ // select current cell
+ cur.pit() = 0;
+ cur.pos() = 0;
+ cur.resetAnchor();
+ cur.setSelection(true);
+ cur.pit() = cur.lastpit();
+ cur.pos() = cur.lastpos();
}
- break;
- }
-
- case LFUN_ALL_INSETS_TOGGLE: {
- string action;
- string const name = split(to_utf8(cmd.argument()), action, ' ');
- InsetCode const inset_code = insetCode(name);
-
- FuncRequest fr(LFUN_INSET_TOGGLE, action);
-
- Inset & inset = cur.buffer()->inset();
- InsetIterator it = inset_iterator_begin(inset);
- InsetIterator const end = inset_iterator_end(inset);
- for (; it != end; ++it) {
- if (it->asInsetCollapsable()
- && (inset_code == NO_CODE
- || inset_code == it->lyxCode())) {
- Cursor tmpcur = cur;
- tmpcur.pushBackward(*it);
- it->dispatch(tmpcur, fr);
+ cur.setCurrentFont();
+ dr.screenUpdate(Update::Force);
+ break;
+
+
+ // This would be in Buffer class if only Cursor did not
+ // require a bufferview
+ case LFUN_INSET_FORALL: {
+ docstring const name = from_utf8(cmd.getArg(0));
+ string const commandstr = cmd.getLongArg(1);
+ FuncRequest const fr = lyxaction.lookupFunc(commandstr);
+
+ // an arbitrary number to limit number of iterations
+ const int max_iter = 100000;
+ int iterations = 0;
+ Cursor & cur = d->cursor_;
+ Cursor const savecur = cur;
+ cur.reset();
+ if (!cur.nextInset())
+ cur.forwardInset();
+ cur.beginUndoGroup();
+ while(cur && iterations < max_iter) {
+ Inset * const ins = cur.nextInset();
+ if (!ins)
+ break;
+ docstring insname = ins->layoutName();
+ while (!insname.empty()) {
+ if (insname == name || name == from_utf8("*")) {
+ cur.recordUndo();
+ lyx::dispatch(fr, dr);
+ ++iterations;
+ break;
+ }
+ size_t const i = insname.rfind(':');
+ if (i == string::npos)
+ break;
+ insname = insname.substr(0, i);
}
+ // if we did not delete the inset, skip it
+ if (!cur.nextInset() || cur.nextInset() == ins)
+ cur.forwardInset();
}
- processUpdateFlags(Update::Force | Update::FitCursor);
+ cur.endUndoGroup();
+ cur = savecur;
+ cur.fixIfBroken();
+ dr.screenUpdate(Update::Force);
+ dr.forceBufferUpdate();
+
+ if (iterations >= max_iter) {
+ dr.setError(true);
+ dr.setMessage(bformat(_("`inset-forall' interrupted because number of actions is larger than %1$d"), max_iter));
+ } else
+ dr.setMessage(bformat(_("Applied \"%1$s\" to %2$d insets"), from_utf8(commandstr), iterations));
break;
}
+
case LFUN_BRANCH_ADD_INSERT: {
docstring branch_name = from_utf8(cmd.getArg(0));
if (branch_name.empty())
break;
}
BranchList & branch_list = buffer_.params().branchlist();
- Branch const * branch = branch_list.find(branch_name);
- string const x11hexname = X11hexname(branch->color());
- docstring const str = branch_name + ' ' + from_ascii(x11hexname);
- lyx::dispatch(FuncRequest(LFUN_SET_COLOR, str));
- lyx::dispatch(FuncRequest(LFUN_BRANCH_INSERT, branch_name));
+ vector<docstring> const branches =
+ getVectorFromString(branch_name, branch_list.separator());
+ for (vector<docstring>::const_iterator it = branches.begin();
+ it != branches.end(); ++it) {
+ branch_name = *it;
+ lyx::dispatch(FuncRequest(LFUN_BRANCH_INSERT, branch_name));
+ }
break;
}
if (decodeInsetParam(name, data, buffer_))
lyx::dispatch(FuncRequest(LFUN_DIALOG_SHOW, name + " " + data));
else
- lyxerr << "Inset type '" << name <<
+ lyxerr << "Inset type '" << name <<
"' not recognized in LFUN_DIALOG_SHOW_NEW_INSET" << endl;
break;
}
arg = token(argument, '|', 0);
opt1 = token(argument, '|', 1);
}
+
+ // if our cursor is directly in front of or behind a citation inset,
+ // we will instead add the new key to it.
+ Inset * inset = cur.nextInset();
+ if (!inset || inset->lyxCode() != CITE_CODE)
+ inset = cur.prevInset();
+ if (inset && inset->lyxCode() == CITE_CODE) {
+ InsetCitation * icite = static_cast<InsetCitation *>(inset);
+ if (icite->addKey(arg)) {
+ dr.forceBufferUpdate();
+ dr.screenUpdate(Update::FitCursor | Update::SinglePar);
+ if (!opt1.empty())
+ LYXERR0("Discarding optional argument to citation-insert.");
+ }
+ dispatched = true;
+ break;
+ }
InsetCommandParams icp(CITE_CODE);
icp["key"] = from_utf8(arg);
if (!opt1.empty())
icp["before"] = from_utf8(opt1);
- string icstr = InsetCommand::params2string("citation", icp);
+ string icstr = InsetCommand::params2string(icp);
FuncRequest fr(LFUN_INSET_INSERT, icstr);
lyx::dispatch(fr);
break;
cur.recordUndo();
FuncRequest fr(LFUN_INSET_MODIFY, cmd.argument());
inset->dispatch(cur, fr);
- processUpdateFlags(Update::SinglePar | Update::FitCursor);
+ dr.screenUpdate(cur.result().screenUpdate());
+ if (cur.result().needBufferUpdate())
+ dr.forceBufferUpdate();
+ break;
+ }
+
+ // FIXME:
+ // The change of language of buffer belongs to the Buffer class.
+ // We have to do it here because we need a cursor for Undo.
+ // When Undo::recordUndoBufferParams() is implemented someday
+ // LFUN_BUFFER_LANGUAGE should be handled by the Buffer class.
+ case LFUN_BUFFER_LANGUAGE: {
+ Language const * oldL = buffer_.params().language;
+ Language const * newL = languages.getLanguage(argument);
+ if (!newL || oldL == newL)
+ break;
+ if (oldL->rightToLeft() == newL->rightToLeft()) {
+ cur.recordUndoFullBuffer();
+ buffer_.changeLanguage(oldL, newL);
+ cur.setCurrentFont();
+ dr.forceBufferUpdate();
+ }
+ break;
+ }
+
+ case LFUN_FILE_INSERT_PLAINTEXT_PARA:
+ case LFUN_FILE_INSERT_PLAINTEXT: {
+ bool const as_paragraph = (act == LFUN_FILE_INSERT_PLAINTEXT_PARA);
+ string const fname = to_utf8(cmd.argument());
+ if (!FileName::isAbsolute(fname))
+ dr.setMessage(_("Absolute filename expected."));
+ else
+ insertPlaintextFile(FileName(fname), as_paragraph);
break;
}
default:
- dispatched = false;
+ // OK, so try the Buffer itself...
+ buffer_.dispatch(cmd, dr);
+ dispatched = dr.dispatched();
break;
}
- if (cmd.action != LFUN_UNDO && cmd.action != LFUN_REDO)
- buffer_.undo().endUndoGroup();
- return dispatched;
+ buffer_.undo().endUndoGroup();
+ dr.dispatched(dispatched);
+
+ // NOTE: The code below is copied from Cursor::dispatch. If you
+ // need to modify this, please update the other one too.
+
+ // notify insets we just entered/left
+ if (cursor() != old) {
+ old.beginUndoGroup();
+ old.fixIfBroken();
+ bool badcursor = notifyCursorLeavesOrEnters(old, cursor());
+ if (badcursor) {
+ cursor().fixIfBroken();
+ resetInlineCompletionPos();
+ }
+ old.endUndoGroup();
+ }
}
LYXERR(Debug::SELECTION, "requestSelection: xsel_cache.set: " << d->xsel_cache_.set);
if (!d->xsel_cache_.set ||
cur.top() != d->xsel_cache_.cursor ||
- cur.anchor_.top() != d->xsel_cache_.anchor)
+ cur.realAnchor().top() != d->xsel_cache_.anchor)
{
d->xsel_cache_.cursor = cur.top();
- d->xsel_cache_.anchor = cur.anchor_.top();
+ d->xsel_cache_.anchor = cur.realAnchor().top();
d->xsel_cache_.set = cur.selection();
return cur.selectionAsString(false);
}
d->xsel_cache_.set = false;
// The buffer did not really change, but this causes the
// redraw we need because we cleared the selection above.
- buffer_.changed();
+ buffer_.changed(false);
}
}
+void BufferView::updateHoveredInset() const
+{
+ // Get inset under mouse, if there is one.
+ int const x = d->mouse_position_cache_.x_;
+ int const y = d->mouse_position_cache_.y_;
+ Inset const * covering_inset = getCoveringInset(buffer_.text(), x, y);
+
+ d->clickable_inset_ = covering_inset && covering_inset->clickable(x, y);
+
+ if (covering_inset == d->last_inset_)
+ // Same inset, no need to do anything...
+ return;
+
+ bool need_redraw = false;
+ if (d->last_inset_) {
+ // Remove the hint on the last hovered inset (if any).
+ need_redraw |= d->last_inset_->setMouseHover(this, false);
+ d->last_inset_ = 0;
+ }
+
+ if (covering_inset && covering_inset->setMouseHover(this, true)) {
+ need_redraw = true;
+ // Only the insets that accept the hover state, do
+ // clear the last_inset_, so only set the last_inset_
+ // member if the hovered setting is accepted.
+ d->last_inset_ = covering_inset;
+ }
+
+ if (need_redraw) {
+ LYXERR(Debug::PAINTING, "Mouse hover detected at: ("
+ << d->mouse_position_cache_.x_ << ", "
+ << d->mouse_position_cache_.y_ << ")");
+
+ d->update_strategy_ = DecorationUpdate;
+
+ // This event (moving without mouse click) is not passed further.
+ // This should be changed if it is further utilized.
+ buffer_.changed(false);
+ }
+}
+
+
+void BufferView::clearLastInset(Inset * inset) const
+{
+ if (d->last_inset_ != inset) {
+ LYXERR0("Wrong last_inset!");
+ LATTEST(false);
+ }
+ d->last_inset_ = 0;
+}
+
+
void BufferView::mouseEventDispatch(FuncRequest const & cmd0)
{
//lyxerr << "[ cmd0 " << cmd0 << "]" << endl;
// surrounding Text will handle this event.
// make sure we stay within the screen...
- cmd.y = min(max(cmd.y, -1), height_);
+ cmd.set_y(min(max(cmd.y(), -1), height_));
- if (cmd.action == LFUN_MOUSE_MOTION && cmd.button() == mouse_button::none) {
+ d->mouse_position_cache_.x_ = cmd.x();
+ d->mouse_position_cache_.y_ = cmd.y();
- // Get inset under mouse, if there is one.
- Inset const * covering_inset =
- getCoveringInset(buffer_.text(), cmd.x, cmd.y);
- if (covering_inset == d->last_inset_)
- // Same inset, no need to do anything...
- return;
-
- bool need_redraw = false;
- // const_cast because of setMouseHover().
- Inset * inset = const_cast<Inset *>(covering_inset);
- if (d->last_inset_)
- // Remove the hint on the last hovered inset (if any).
- need_redraw |= d->last_inset_->setMouseHover(false);
- if (inset)
- // Highlighted the newly hovered inset (if any).
- need_redraw |= inset->setMouseHover(true);
- d->last_inset_ = inset;
- if (!need_redraw)
- return;
-
- LYXERR(Debug::PAINTING, "Mouse hover detected at: ("
- << cmd.x << ", " << cmd.y << ")");
-
- d->update_strategy_ = DecorationUpdate;
-
- // This event (moving without mouse click) is not passed further.
- // This should be changed if it is further utilized.
- buffer_.changed();
+ if (cmd.action() == LFUN_MOUSE_MOTION && cmd.button() == mouse_button::none) {
+ updateHoveredInset();
return;
}
// Build temporary cursor.
- Inset * inset = d->text_metrics_[&buffer_.text()].editXY(cur, cmd.x, cmd.y);
+ Inset * inset = d->text_metrics_[&buffer_.text()].editXY(cur, cmd.x(), cmd.y());
+ if (inset) {
+ // If inset is not editable, cur.pos() might point behind the
+ // inset (depending on cmd.x(), cmd.y()). This is needed for
+ // editing to fix bug 9628, but e.g. the context menu needs a
+ // cursor in front of the inset.
+ if (inset->hasSettings() &&
+ cur.nextInset() != inset && cur.prevInset() == inset)
+ cur.backwardPos();
+ }
// Put anchor at the same position.
cur.resetAnchor();
// Notify left insets
if (cur != old) {
- old.fixIfBroken();
- bool badcursor = notifyCursorLeavesOrEnters(old, cur);
+ bool badcursor = old.fixIfBroken() | cur.fixIfBroken();
+ badcursor |= notifyCursorLeavesOrEnters(old, cur);
if (badcursor)
cursor().fixIfBroken();
}
-
+
// Do we have a selection?
theSelection().haveSelection(cursor().selection());
- // If the command has been dispatched,
- if (cur.result().dispatched() || cur.result().update())
- processUpdateFlags(cur.result().update());
-}
-
-
-void BufferView::lfunScroll(FuncRequest const & cmd)
-{
- string const scroll_type = cmd.getArg(0);
- int const scroll_step =
- (scroll_type == "line") ? d->scrollbarParameters_.single_step
- : (scroll_type == "page") ? d->scrollbarParameters_.page_step : 0;
- if (scroll_step == 0)
- return;
- string const scroll_quantity = cmd.getArg(1);
- if (scroll_quantity == "up")
- scrollUp(scroll_step);
- else if (scroll_quantity == "down")
- scrollDown(scroll_step);
- else {
- int const scroll_value = convert<int>(scroll_quantity);
- if (scroll_value)
- scroll(scroll_step * scroll_value);
+ if (cur.needBufferUpdate()) {
+ cur.clearBufferUpdate();
+ buffer().updateBuffer();
}
- updateMetrics();
- buffer_.changed();
+
+ // If the command has been dispatched,
+ if (cur.result().dispatched() || cur.result().screenUpdate())
+ processUpdateFlags(cur.result().screenUpdate());
}
void BufferView::setCursorFromRow(int row)
{
- int tmpid = -1;
- int tmppos = -1;
+ setCursorFromRow(row, buffer_.texrow());
+}
- buffer_.texrow().getIdFromRow(row, tmpid, tmppos);
- d->cursor_.reset(buffer_.inset());
- if (tmpid == -1)
- buffer_.text().setCursor(d->cursor_, 0, 0);
- else
- buffer_.text().setCursor(d->cursor_, buffer_.getParFromID(tmpid).pit(), tmppos);
+void BufferView::setCursorFromRow(int row, TexRow const & texrow)
+{
+ int tmpid;
+ int tmppos;
+ pit_type newpit = 0;
+ pos_type newpos = 0;
+
+ texrow.getIdFromRow(row, tmpid, tmppos);
+
+ bool posvalid = (tmpid != -1);
+ if (posvalid) {
+ // we need to make sure that the row and position
+ // we got back are valid, because the buffer may well
+ // have changed since we last generated the LaTeX.
+ DocIterator dit = buffer_.getParFromID(tmpid);
+ if (dit == doc_iterator_end(&buffer_))
+ posvalid = false;
+ else if (dit.depth() > 1) {
+ // We are in an inset.
+ pos_type lastpos = dit.lastpos();
+ dit.pos() = tmppos > lastpos ? lastpos : tmppos;
+ setCursor(dit);
+ recenter();
+ return;
+ } else {
+ newpit = dit.pit();
+ // now have to check pos.
+ newpos = tmppos;
+ Paragraph const & par = buffer_.text().getPar(newpit);
+ if (newpos > par.size()) {
+ LYXERR0("Requested position no longer valid.");
+ newpos = par.size() - 1;
+ }
+ }
+ }
+ if (!posvalid) {
+ frontend::Alert::error(_("Inverse Search Failed"),
+ _("Invalid position requested by inverse search.\n"
+ "You need to update the viewed document."));
+ return;
+ }
+ d->cursor_.reset();
+ buffer_.text().setCursor(d->cursor_, newpit, newpos);
+ d->cursor_.setSelection(false);
+ d->cursor_.resetAnchor();
recenter();
}
// Inset is not at cursor position. Find it in the document.
Cursor cur(*this);
- cur.reset(buffer().inset());
+ cur.reset();
while (cur && cur.nextInset() != inset)
cur.forwardInset();
void BufferView::gotoLabel(docstring const & label)
{
- std::vector<Buffer const *> bufs = buffer().allRelatives();
- std::vector<Buffer const *>::iterator it = bufs.begin();
+ ListOfBuffers bufs = buffer().allRelatives();
+ ListOfBuffers::iterator it = bufs.begin();
for (; it != bufs.end(); ++it) {
Buffer const * buf = *it;
// find label
- Toc & toc = buf->tocBackend().toc("label");
- TocIterator toc_it = toc.begin();
- TocIterator end = toc.end();
+ shared_ptr<Toc> toc = buf->tocBackend().toc("label");
+ TocIterator toc_it = toc->begin();
+ TocIterator end = toc->end();
for (; toc_it != end; ++toc_it) {
if (label == toc_it->str()) {
- dispatch(toc_it->action());
+ lyx::dispatch(toc_it->action());
return;
}
}
TextMetrics & BufferView::textMetrics(Text const * t)
{
+ LBUFERR(t);
TextMetricsCache::iterator tmc_it = d->text_metrics_.find(t);
if (tmc_it == d->text_metrics_.end()) {
tmc_it = d->text_metrics_.insert(
void BufferView::setCursor(DocIterator const & dit)
{
- d->cursor_.reset(buffer().inset());
+ d->cursor_.reset();
size_t const n = dit.depth();
for (size_t i = 0; i < n; ++i)
dit[i].inset().edit(d->cursor_, true);
d->cursor_.setCursor(dit);
d->cursor_.setSelection(false);
+ d->cursor_.setCurrentFont();
+ // FIXME
+ // It seems on general grounds as if this is probably needed, but
+ // it is not yet clear.
+ // See bug #7394 and r38388.
+ // d->cursor.resetAnchor();
}
d->cursor_ = cur;
- buffer_.updateLabels();
+ // we would rather not do this here, but it needs to be done before
+ // the changed() signal is sent.
+ buffer_.updateBuffer();
- updateMetrics();
- buffer_.changed();
+ buffer_.changed(true);
return true;
}
bool BufferView::mouseSetCursor(Cursor & cur, bool select)
{
- LASSERT(&cur.bv() == this, /**/);
+ LASSERT(&cur.bv() == this, return false);
if (!select)
// this event will clear selection so we save selection for
// persistent selection
cap::saveSelection(cursor());
+ d->cursor_.macroModeClose();
+ // If a macro has been finalized, the cursor might have been broken
+ cur.fixIfBroken();
+
// Has the cursor just left the inset?
- bool leftinset = (&d->cursor_.inset() != &cur.inset());
+ bool const leftinset = (&d->cursor_.inset() != &cur.inset());
if (leftinset)
d->cursor_.fixIfBroken();
// FIXME: shift-mouse selection doesn't work well across insets.
- bool do_selection = select && &d->cursor_.anchor().inset() == &cur.inset();
+ bool const do_selection =
+ select && &d->cursor_.normalAnchor().inset() == &cur.inset();
// do the dEPM magic if needed
// FIXME: (1) move this to InsetText::notifyCursorLeaves?
bool update = leftinset;
if (!do_selection && d->cursor_.inTexted())
update |= checkDepm(cur, d->cursor_);
- d->cursor_.macroModeClose();
- d->cursor_.resetAnchor();
+ if (!do_selection)
+ d->cursor_.resetAnchor();
d->cursor_.setCursor(cur);
d->cursor_.boundary(cur.boundary());
if (do_selection)
d->cursor_.finishUndo();
d->cursor_.setCurrentFont();
+ if (update)
+ cur.forceBufferUpdate();
return update;
}
} else
d->cursor_.setSelection(d->cursor_, length);
}
- // Ensure a redraw happens in any case because the new selection could
- // possibly be on the same screen as the previous selection.
- processUpdateFlags(Update::Force | Update::FitCursor);
+}
+
+
+bool BufferView::selectIfEmpty(DocIterator & cur)
+{
+ if ((cur.inTexted() && !cur.paragraph().empty())
+ || (cur.inMathed() && !cur.cell().empty()))
+ return false;
+
+ pit_type const beg_pit = cur.pit();
+ if (beg_pit > 0) {
+ // The paragraph associated to this item isn't
+ // the first one, so it can be selected
+ cur.backwardPos();
+ } else {
+ // We have to resort to select the space between the
+ // end of this item and the begin of the next one
+ cur.forwardPos();
+ }
+ if (cur.empty()) {
+ // If it is the only item in the document,
+ // nothing can be selected
+ return false;
+ }
+ pit_type const end_pit = cur.pit();
+ pos_type const end_pos = cur.pos();
+ d->cursor_.clearSelection();
+ d->cursor_.reset();
+ d->cursor_.setCursor(cur);
+ d->cursor_.pit() = beg_pit;
+ d->cursor_.pos() = 0;
+ d->cursor_.setSelection(false);
+ d->cursor_.resetAnchor();
+ d->cursor_.pit() = end_pit;
+ d->cursor_.pos() = end_pos;
+ d->cursor_.setSelection();
+ return true;
}
// (if this paragraph contains insets etc., rebreaking will
// recursively descend)
tm.redoParagraph(bottom_pit);
- ParagraphMetrics const & pm = tm.parMetrics(bottom_pit);
+ ParagraphMetrics const & pm = tm.parMetrics(bottom_pit);
if (pm.height() != old_height)
// Paragraph height has changed so we cannot proceed to
// the singlePar optimisation.
// make sure inline completion pointer is ok
if (d->inlineCompletionPos_.fixIfBroken())
d->inlineCompletionPos_ = DocIterator();
-
+
if (d->anchor_pit_ >= npit)
// The anchor pit must have been deleted...
d->anchor_pit_ = npit - 1;
// Rebreak anchor paragraph.
tm.redoParagraph(d->anchor_pit_);
ParagraphMetrics & anchor_pm = tm.par_metrics_[d->anchor_pit_];
-
+
// position anchor
if (d->anchor_pit_ == 0) {
int scrollRange = d->scrollbarParameters_.max - d->scrollbarParameters_.min;
-
+
// Complete buffer visible? Then it's easy.
if (scrollRange == 0)
d->anchor_ypos_ = anchor_pm.ascent();
-
+
// FIXME: Some clever handling needed to show
// the _first_ paragraph up to the top if the cursor is
// in the first line.
- }
+ }
anchor_pm.setPosition(d->anchor_ypos_);
LYXERR(Debug::PAINTING, "metrics: "
void BufferView::insertLyXFile(FileName const & fname)
{
- LASSERT(d->cursor_.inTexted(), /**/);
+ LASSERT(d->cursor_.inTexted(), return);
// Get absolute path of file and add ".lyx"
// to the filename if necessary
- FileName filename = fileSearch(string(), fname.absFilename(), "lyx");
+ FileName filename = fileSearch(string(), fname.absFileName(), "lyx");
- docstring const disp_fn = makeDisplayPath(filename.absFilename());
+ docstring const disp_fn = makeDisplayPath(filename.absFileName());
// emit message signal.
message(bformat(_("Inserting document %1$s..."), disp_fn));
docstring res;
- Buffer buf("", false);
- if (buf.loadLyXFile(filename)) {
+ Buffer buf(filename.absFileName(), false);
+ if (buf.loadLyXFile() == Buffer::ReadSuccess) {
ErrorList & el = buffer_.errorList("Parse");
// Copy the inserted document error list into the current buffer one.
el = buf.errorList("Parse");
res = _("Could not insert document %1$s");
}
- updateMetrics();
- buffer_.changed();
+ buffer_.changed(true);
// emit message signal.
message(bformat(res, disp_fn));
- buffer_.errors("Parse");
}
-Point BufferView::coordOffset(DocIterator const & dit, bool boundary) const
+Point BufferView::coordOffset(DocIterator const & dit) const
{
int x = 0;
int y = 0;
int lastw = 0;
// Addup contribution of nested insets, from inside to outside,
- // keeping the outer paragraph for a special handling below
+ // keeping the outer paragraph for a special handling below
for (size_t i = dit.depth() - 1; i >= 1; --i) {
CursorSlice const & sl = dit[i];
int xx = 0;
int yy = 0;
-
+
// get relative position inside sl.inset()
- sl.inset().cursorPos(*this, sl, boundary && (i + 1 == dit.depth()), xx, yy);
-
+ sl.inset().cursorPos(*this, sl, dit.boundary() && (i + 1 == dit.depth()), xx, yy);
+
// Make relative position inside of the edited inset relative to sl.inset()
x += xx;
y += yy;
-
+
// In case of an RTL inset, the edited inset will be positioned to the left
// of xx:yy
if (sl.text()) {
- bool boundary_i = boundary && i + 1 == dit.depth();
+ bool boundary_i = dit.boundary() && i + 1 == dit.depth();
bool rtl = textMetrics(sl.text()).isRTL(sl, boundary_i);
if (rtl)
x -= lastw;
// FIXME (Abdel 23/09/2007): this is a bit messy because of the
// elimination of Inset::dim_ cache. This coordOffset() method needs
// to be rewritten in light of the new design.
- Dimension const & dim = parMetrics(dit[i - 1].text(),
- dit[i - 1].pit()).insetDimension(&sl.inset());
+ Dimension const & dim = coordCache().getInsets().dim(&sl.inset());
lastw = dim.wid;
} else {
Dimension const dim = sl.inset().dimension(*this);
lastw = dim.wid;
}
-
+
//lyxerr << "Cursor::getPos, i: "
// << i << " x: " << xx << " y: " << y << endl;
}
CursorSlice const & sl = dit[0];
TextMetrics const & tm = textMetrics(sl.text());
ParagraphMetrics const & pm = tm.parMetrics(sl.pit());
- LASSERT(!pm.rows().empty(), /**/);
+
+ LBUFERR(!pm.rows().empty());
y -= pm.rows()[0].ascent();
#if 1
// FIXME: document this mess
size_t rend;
if (sl.pos() > 0 && dit.depth() == 1) {
int pos = sl.pos();
- if (pos && boundary)
+ if (pos && dit.boundary())
--pos;
-// lyxerr << "coordOffset: boundary:" << boundary << " depth:" << dit.depth() << " pos:" << pos << " sl.pos:" << sl.pos() << endl;
+// lyxerr << "coordOffset: boundary:" << dit.boundary() << " depth:" << dit.depth() << " pos:" << pos << " sl.pos:" << sl.pos() << endl;
rend = pm.pos2row(pos);
} else
rend = pm.pos2row(sl.pos());
for (size_t rit = 0; rit != rend; ++rit)
y += pm.rows()[rit].height();
y += pm.rows()[rend].ascent();
-
+
TextMetrics const & bottom_tm = textMetrics(dit.bottom().text());
-
+
// Make relative position from the nested inset now bufferview absolute.
- int xx = bottom_tm.cursorX(dit.bottom(), boundary && dit.depth() == 1);
+ int xx = bottom_tm.cursorX(dit.bottom(), dit.boundary() && dit.depth() == 1);
x += xx;
-
- // In the RTL case place the nested inset at the left of the cursor in
+
+ // In the RTL case place the nested inset at the left of the cursor in
// the outer paragraph
- bool boundary_1 = boundary && 1 == dit.depth();
+ bool boundary_1 = dit.boundary() && 1 == dit.depth();
bool rtl = bottom_tm.isRTL(dit.bottom(), boundary_1);
if (rtl)
x -= lastw;
-
+
return Point(x, y);
}
-Point BufferView::getPos(DocIterator const & dit, bool boundary) const
+Point BufferView::getPos(DocIterator const & dit) const
{
if (!paragraphVisible(dit))
return Point(-1, -1);
CursorSlice const & bot = dit.bottom();
TextMetrics const & tm = textMetrics(bot.text());
- Point p = coordOffset(dit, boundary); // offset from outer paragraph
+ // offset from outer paragraph
+ Point p = coordOffset(dit);
p.y_ += tm.parMetrics(bot.pit()).position();
return p;
}
int const asc = fm.maxAscent();
int const des = fm.maxDescent();
h = asc + des;
- p = getPos(cur, cur.boundary());
+ p = getPos(cur);
p.y_ -= asc;
}
}
+int BufferView::horizScrollOffset() const
+{
+ return d->horiz_scroll_offset_;
+}
+
+
+CursorSlice const & BufferView::currentRowSlice() const
+{
+ return d->current_row_slice_;
+}
+
+
+CursorSlice const & BufferView::lastRowSlice() const
+{
+ return d->last_row_slice_;
+}
+
+
+void BufferView::setCurrentRowSlice(CursorSlice const & rowSlice)
+{
+ // nothing to do if the cursor was already on this row
+ if (d->current_row_slice_ == rowSlice) {
+ d->last_row_slice_ = CursorSlice();
+ return;
+ }
+
+ // if the (previous) current row was scrolled, we have to
+ // remember it in order to repaint it next time.
+ if (d->horiz_scroll_offset_ != 0)
+ d->last_row_slice_ = d->current_row_slice_;
+ else
+ d->last_row_slice_ = CursorSlice();
+
+ // Since we changed row, the scroll offset is not valid anymore
+ d->horiz_scroll_offset_ = 0;
+ d->current_row_slice_ = rowSlice;
+}
+
+
+void BufferView::checkCursorScrollOffset(PainterInfo & pi)
+{
+ CursorSlice rowSlice = d->cursor_.bottom();
+ TextMetrics const & tm = textMetrics(rowSlice.text());
+
+ // Stop if metrics have not been computed yet, since it means
+ // that there is nothing to do.
+ if (!tm.contains(rowSlice.pit()))
+ return;
+ ParagraphMetrics const & pm = tm.parMetrics(rowSlice.pit());
+ Row const & row = pm.getRow(rowSlice.pos(),
+ d->cursor_.boundary() && rowSlice == d->cursor_.top());
+ rowSlice.pos() = row.pos();
+
+ // Set the row on which the cursor lives.
+ setCurrentRowSlice(rowSlice);
+
+ // If insets referred to by cursor are not all in the cache, the positions
+ // need to be recomputed.
+ if (!d->cursor_.inCoordCache()) {
+ /** FIXME: the code below adds an extraneous computation of
+ * inset positions, and can therefore be bad for performance
+ * (think for example about a very large tabular inset.
+ * Redawing the row where it is means redrawing the whole
+ * screen).
+ *
+ * The bug that this fixes is the following: assume that there
+ * is a very large math inset. Upon entering the inset, when
+ * pressing `End', the row is not scrolled and the cursor is
+ * not visible. The extra row computation makes sure that the
+ * inset positions are correctly computed and set in the
+ * cache. This would not happen if we did not have two-stage
+ * drawing.
+ *
+ * A proper fix would be to always have proper inset positions
+ * at this point.
+ */
+ // Force the recomputation of inset positions
+ bool const drawing = pi.pain.isDrawingEnabled();
+ pi.pain.setDrawingEnabled(false);
+ // No need to care about vertical position.
+ RowPainter rp(pi, buffer().text(), d->cursor_.bottom().pit(), row,
+ -d->horiz_scroll_offset_, 0);
+ rp.paintText();
+ pi.pain.setDrawingEnabled(drawing);
+ }
+
+ // Current x position of the cursor in pixels
+ int cur_x = getPos(d->cursor_).x_;
+
+ // Horizontal scroll offset of the cursor row in pixels
+ int offset = d->horiz_scroll_offset_;
+ int const MARGIN = 2 * theFontMetrics(d->cursor_.real_current_font).em()
+ + row.right_margin;
+ if (row.right_x() <= workWidth() - row.right_margin) {
+ // Row is narrower than the work area, no offset needed.
+ offset = 0;
+ } else {
+ if (cur_x - offset < MARGIN) {
+ // cursor would be too far right
+ offset = cur_x - MARGIN;
+ } else if (cur_x - offset > workWidth() - MARGIN) {
+ // cursor would be too far left
+ offset = cur_x - workWidth() + MARGIN;
+ }
+ // Correct the offset to make sure that we do not scroll too much
+ if (offset < 0)
+ offset = 0;
+ if (row.right_x() - offset < workWidth() - row.right_margin)
+ offset = row.right_x() - workWidth() + row.right_margin;
+ }
+
+ //lyxerr << "cur_x=" << cur_x << ", offset=" << offset << ", row.wid=" << row.width() << ", margin=" << MARGIN << endl;
+
+ if (offset != d->horiz_scroll_offset_)
+ LYXERR(Debug::PAINTING, "Horiz. scroll offset changed from "
+ << d->horiz_scroll_offset_ << " to " << offset);
+
+ if (d->update_strategy_ == NoScreenUpdate
+ && (offset != d->horiz_scroll_offset_
+ || !d->last_row_slice_.empty())) {
+ // FIXME: if one uses SingleParUpdate, then home/end
+ // will not work on long rows. Why?
+ d->update_strategy_ = FullScreenUpdate;
+ }
+
+ d->horiz_scroll_offset_ = offset;
+}
+
+
void BufferView::draw(frontend::Painter & pain)
{
if (height_ == 0 || width_ == 0)
int const y = tm.first().second->position();
PainterInfo pi(this, pain);
+ // Check whether the row where the cursor lives needs to be scrolled.
+ // Update the drawing strategy if needed.
+ checkCursorScrollOffset(pi);
+
switch (d->update_strategy_) {
case NoScreenUpdate:
// If no screen painting is actually needed, only some the different
// coordinates of insets and paragraphs needs to be updated.
+ LYXERR(Debug::PAINTING, "Strategy: NoScreenUpdate");
pi.full_repaint = true;
pi.pain.setDrawingEnabled(false);
- tm.draw(pi, 0, y);
+ tm.draw(pi, 0, y);
break;
case SingleParUpdate:
pi.full_repaint = false;
+ LYXERR(Debug::PAINTING, "Strategy: SingleParUpdate");
// In general, only the current row of the outermost paragraph
// will be redrawn. Particular cases where selection spans
// multiple paragraph are correctly detected in TextMetrics.
- tm.draw(pi, 0, y);
+ tm.draw(pi, 0, y);
break;
case DecorationUpdate:
// because of the single backing pixmap.
case FullScreenUpdate:
+
+ LYXERR(Debug::PAINTING,
+ ((d->update_strategy_ == FullScreenUpdate)
+ ? "Strategy: FullScreenUpdate"
+ : "Strategy: DecorationUpdate"));
+
// The whole screen, including insets, will be refreshed.
pi.full_repaint = true;
// and possibly grey out below
pair<pit_type, ParagraphMetrics const *> lastpm = tm.last();
int const y2 = lastpm.second->position() + lastpm.second->descent();
-
+
if (y2 < height_) {
- Color color = buffer().isInternal()
+ Color color = buffer().isInternal()
? Color_background : Color_bottomarea;
pain.fillRectangle(0, y2, width_, height_ - y2, color);
}
{
if (!fname.isReadableFile()) {
docstring const error = from_ascii(strerror(errno));
- docstring const file = makeDisplayPath(fname.absFilename(), 50);
+ docstring const file = makeDisplayPath(fname.absFileName(), 50);
docstring const text =
bformat(_("Could not read the specified document\n"
"%1$s\ndue to the error: %2$s"), file, error);
}
if (!fname.isReadableFile()) {
- docstring const file = makeDisplayPath(fname.absFilename(), 50);
+ docstring const file = makeDisplayPath(fname.absFileName(), 50);
docstring const text =
bformat(_("%1$s\n is not readable."), file);
Alert::error(_("Could not open file"), text);
else
cur.innerText()->insertStringAsLines(cur, tmpstr, cur.current_font);
- updateMetrics();
- buffer_.changed();
+ buffer_.changed(true);
}
}
+void BufferView::resetInlineCompletionPos()
+{
+ d->inlineCompletionPos_ = DocIterator();
+}
+
+
bool samePar(DocIterator const & a, DocIterator const & b)
{
if (a.empty() && b.empty())
}
-void BufferView::setInlineCompletion(Cursor & cur, DocIterator const & pos,
+void BufferView::setInlineCompletion(Cursor const & cur, DocIterator const & pos,
docstring const & completion, size_t uniqueChars)
{
uniqueChars = min(completion.size(), uniqueChars);
bool singlePar = true;
d->inlineCompletion_ = completion;
d->inlineCompletionUniqueChars_ = min(completion.size(), uniqueChars);
-
+
//lyxerr << "setInlineCompletion pos=" << pos << " completion=" << completion << " uniqueChars=" << uniqueChars << std::endl;
-
+
// at new position?
DocIterator const & old = d->inlineCompletionPos_;
if (old != pos) {
}
d->inlineCompletionPos_ = pos;
}
-
+
// set update flags
if (changed) {
- if (singlePar && !(cur.disp_.update() & Update::Force))
- cur.updateFlags(cur.disp_.update() | Update::SinglePar);
+ if (singlePar && !(cur.result().screenUpdate() & Update::Force))
+ cur.screenUpdateFlags(cur.result().screenUpdate() | Update::SinglePar);
else
- cur.updateFlags(cur.disp_.update() | Update::Force);
+ cur.screenUpdateFlags(cur.result().screenUpdate() | Update::Force);
}
}
+
+bool BufferView::clickableInset() const
+{
+ return d->clickable_inset_;
+}
+
} // namespace lyx