#include "frontends/Alert.h"
#include "frontends/FileDialog.h"
#include "frontends/FontMetrics.h"
-#include "frontends/Selection.h"
#include "graphics/Previews.h"
// to this buffer later on.
buffer_->saveCursor(cursor_.selectionBegin(),
cursor_.selectionEnd());
+ // update bookmark pit of the current buffer before switch
+ for (size_t i = 0; i < LyX::ref().session().bookmarks().size(); ++i) {
+ BookmarksSection::Bookmark const & bm = LyX::ref().session().bookmarks().bookmark(i);
+ if (buffer()->fileName() != bm.filename.absFilename())
+ continue;
+ // if par_id or pit has been changed, reset par_pit and par_id
+ // see http://bugzilla.lyx.org/show_bug.cgi?id=3092
+ pit_type new_pit;
+ int new_id;
+ boost::tie(new_pit, new_id) = moveToPosition(bm.par_pit, bm.par_id, bm.par_pos);
+ if (bm.par_pit != new_pit || bm.par_id != new_id)
+ const_cast<BookmarksSection::Bookmark &>(bm).setPos(new_pit, new_id);
+ }
// current buffer is going to be switched-off, save cursor pos
LyX::ref().session().lastFilePos().save(FileName(buffer_->fileName()),
boost::tie(cursor_.pit(), cursor_.pos()) );
cursor_.resetAnchor();
cursor_.setCursor(buffer_->getCursor().asDocIterator(&(buffer_->inset())));
cursor_.setSelection();
- theSelection().haveSelection(cursor_.selection());
+ // do not set selection to the new buffer because we
+ // only paste recent selection.
}
}
void BufferView::setCursorFromScrollbar()
{
+ if (!buffer_)
+ return;
+
LyXText & t = buffer_->text();
int const height = 2 * defaultRowHeight();
switch (st) {
case bv_funcs::CUR_ABOVE:
+ // We reset the cursor because bv_funcs::status() does not
+ // work when the cursor is within mathed.
+ cur.reset(buffer_->inset());
t.setCursorFromCoordinates(cur, 0, first);
cur.clearSelection();
break;
case bv_funcs::CUR_BELOW:
+ // We reset the cursor because bv_funcs::status() does not
+ // work when the cursor is within mathed.
+ cur.reset(buffer_->inset());
t.setCursorFromCoordinates(cur, 0, last);
cur.clearSelection();
break;
if (!lyxrc.rtl_support)
return;
- if (getLyXText()->real_current_font.isRightToLeft()) {
+ if (cursor_.innerText()->real_current_font.isRightToLeft()) {
if (intl_->keymap == Intl::PRIMARY)
intl_->keyMapSec();
} else {
case LFUN_CHANGES_OUTPUT: {
OutputParams runparams;
- LaTeXFeatures features(*buffer_, buffer_->params(), runparams);
- flag.enabled(buffer_ && features.isAvailable("dvipost"));
+ flag.enabled(buffer_ && LaTeXFeatures::isAvailable("dvipost"));
flag.setOnOff(buffer_->params().outputChanges);
break;
}
}
-bool BufferView::dispatch(FuncRequest const & cmd)
+Update::flags BufferView::dispatch(FuncRequest const & cmd)
{
//lyxerr << BOOST_CURRENT_FUNCTION
// << [ cmd = " << cmd << "]" << endl;
<< " button[" << cmd.button() << ']'
<< endl;
+ // FIXME: this should not be possible.
+ if (!buffer_)
+ return Update::None;
+
LCursor & cur = cursor_;
+ // Default Update flags.
+ Update::flags updateFlags = Update::Force | Update::FitCursor;
switch (cmd.action) {
case LFUN_UNDO:
- if (buffer_) {
- cur.message(_("Undo"));
- cur.clearSelection();
- if (!textUndo(*this))
- cur.message(_("No further undo information"));
- update();
- switchKeyMap();
+ cur.message(_("Undo"));
+ cur.clearSelection();
+ if (!textUndo(*this)) {
+ cur.message(_("No further undo information"));
+ updateFlags = Update::None;
}
+ switchKeyMap();
break;
case LFUN_REDO:
- if (buffer_) {
- cur.message(_("Redo"));
- cur.clearSelection();
- if (!textRedo(*this))
- cur.message(_("No further redo information"));
- update();
- switchKeyMap();
+ cur.message(_("Redo"));
+ cur.clearSelection();
+ if (!textRedo(*this)) {
+ cur.message(_("No further redo information"));
+ updateFlags = Update::None;
}
+ switchKeyMap();
break;
case LFUN_FILE_INSERT:
if (b == buffer_) {
// Set the cursor
setCursor(makeDocIterator(par, 0));
- update();
switchKeyMap();
} else {
// Switch to other buffer view and resend cmd
theLyXFunc().dispatch(FuncRequest(
LFUN_BUFFER_SWITCH, b->fileName()));
theLyXFunc().dispatch(cmd);
+ updateFlags = Update::None;
}
break;
}
buffer_->params().trackChanges = !buffer_->params().trackChanges;
break;
- case LFUN_CHANGES_OUTPUT: {
+ case LFUN_CHANGES_OUTPUT:
buffer_->params().outputChanges = !buffer_->params().outputChanges;
break;
- }
case LFUN_CHANGE_NEXT:
findNextChange(this);
showDialog("changes");
break;
- case LFUN_ALL_CHANGES_ACCEPT: {
+ case LFUN_ALL_CHANGES_ACCEPT:
+ // select complete document
cursor_.reset(buffer_->inset());
-#ifdef WITH_WARNINGS
-#warning FIXME changes
-#endif
- while (findNextChange(this))
- getLyXText()->acceptOrRejectChange(cursor_, true);
- update();
+ cursor_.selHandle(true);
+ buffer_->text().cursorBottom(cursor_);
+ // accept everything in a single step to support atomic undo
+ buffer_->text().acceptOrRejectChanges(cursor_, LyXText::ACCEPT);
break;
- }
- case LFUN_ALL_CHANGES_REJECT: {
+ case LFUN_ALL_CHANGES_REJECT:
+ // select complete document
cursor_.reset(buffer_->inset());
-#ifdef WITH_WARNINGS
-#warning FIXME changes
-#endif
- while (findNextChange(this))
- getLyXText()->acceptOrRejectChange(cursor_, false);
+ cursor_.selHandle(true);
+ buffer_->text().cursorBottom(cursor_);
+ // reject everything in a single step to support atomic undo
+ // Note: reject does not work recursively; the user may have to repeat the operation
+ buffer_->text().acceptOrRejectChanges(cursor_, LyXText::REJECT);
break;
- }
case LFUN_WORD_FIND:
find(this, cmd);
}
default:
- return false;
+ updateFlags = Update::None;
}
- return true;
+ return updateFlags;
}
{
if (buffer_) {
cursor_.clearSelection();
+ // Clear the selection buffer. Otherwise a subsequent
+ // middle-mouse-button paste would use the selection buffer,
+ // not the more current external selection.
+ cap::clearSelection();
xsel_cache_.set = false;
// The buffer did not really change, but this causes the
// redraw we need because we cleared the selection above.
}
-LyXText * BufferView::getLyXText()
-{
- LyXText * text = cursor_.innerText();
- BOOST_ASSERT(text);
- return text;
-}
-
-
-LyXText const * BufferView::getLyXText() const
-{
- LyXText const * text = cursor_.innerText();
- BOOST_ASSERT(text);
- return text;
-}
-
-
TextMetrics const & BufferView::textMetrics(LyXText const * t) const
{
return const_cast<BufferView *>(this)->textMetrics(t);
if (!changed)
return false;
+ updateLabels(*buffer_);
+
updateMetrics(false);
buffer_->changed();
return true;
cursor_.setCursor(dit);
cursor_.clearSelection();
- // remember new position.
- cursor_.setTargetX();
finishUndo();
return update;
}
cursor_.setSelection(cursor_, -length);
} else
cursor_.setSelection(cursor_, length);
- theSelection().haveSelection(cursor_.selection());
+ cap::saveSelection(cursor_);
}
}
projects / lyx.git / blobdiff