# Bo Peng <ben.bob@gmail.com>, 2007.
# Min Ding <u5032331@uds.anu.edu.au>, 2014.
# Winfred Huang <tone90999@hotmail.com>, 2018.
+# Jiaxu Zi <3119932298@qq.com>, 2024.
# Note from Winfred Huang:
# 本翻译文件依照俄文版处理了一部分无需翻译照抄原文的条目,
# 依照日文版处理了一部分需要翻译的条目。少部分条目之翻译为
msgstr ""
"Project-Id-Version: zh_CN\n"
"Report-Msgid-Bugs-To: lyx-devel@lists.lyx.org\n"
-"POT-Creation-Date: 2024-01-11 11:07-0500\n"
-"PO-Revision-Date: 2020-07-22 10:09+0800\n"
-"Last-Translator: Winfred Huang <tone90999@hotmail.com>\n"
+"POT-Creation-Date: 2024-02-12 11:10-0500\n"
+"PO-Revision-Date: 2024-04-13 13:30+0800\n"
+"Last-Translator: Jiaxu Zi <3119932298@qq.com>\n"
"Language-Team: 简体中文 <lyx-docs@lists.lyx.org>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
#: src/frontends/qt/ui/AboutUi.ui:156
msgid "[[do]]&Open"
-msgstr ""
+msgstr "打开(&O)"
#: src/frontends/qt/ui/AboutUi.ui:191
#, fuzzy
#: src/frontends/qt/ui/AboutUi.ui:222
msgid "Open user directory in file browser"
-msgstr ""
+msgstr "在文件浏览器中打开用户目录"
#: src/frontends/qt/ui/AboutUi.ui:225
#, fuzzy
#: src/frontends/qt/ui/AboutUi.ui:361
msgid "Copy version information to clipboard"
-msgstr ""
+msgstr "复制版本信息到剪切板"
#: src/frontends/qt/ui/AboutUi.ui:364
#, fuzzy
msgid "Copy &Version Info"
-msgstr "插入版本信息"
+msgstr "插入版本信息(&V)"
#: src/frontends/qt/ui/BibitemUi.ui:26 src/frontends/qt/ui/BibitemUi.ui:45
msgid "The bibliography key"
#: src/frontends/qt/ui/BibitemUi.ui:96
msgid "The year with \"Author (Year)\" citations (without parentheses)."
-msgstr ""
+msgstr "采用“作者 (年份)”格式引用的年份(不带括号)。"
#: src/frontends/qt/ui/BibitemUi.ui:105 src/frontends/qt/GuiBibitem.cpp:64
#, fuzzy
"full list for author-year citation, you can put the full list here and the "
"abbreviated list above."
msgstr ""
+"如果您希望同时使用包含“et al.”的作者缩写列表以及作者-年份引用的完整列表,"
+"您可以在此处放置完整列表,而在上方放置缩写列表。"
#: src/frontends/qt/ui/BibitemUi.ui:122 src/frontends/qt/GuiBibitem.cpp:93
msgid ""
#: src/frontends/qt/ui/BibtexUi.ui:94
msgid "&Inherit from Master"
-msgstr ""
+msgstr "继承自 Master (&I)"
#: src/frontends/qt/ui/BibtexUi.ui:101
msgid "Remove the selected database"
"If your bibliography databases use a different encoding than the LyX "
"document, specify it here"
msgstr ""
+"若您的参考文献数据库所采用的编码与 LyX 文档的编码不一致,"
+"请在此处指定该编码。"
#: src/frontends/qt/ui/BibtexUi.ui:270
msgid "The BibTeX style"
msgstr "删除选中分支"
#: src/frontends/qt/ui/BranchesUi.ui:74 src/frontends/qt/ui/IndicesUi.ui:165
-#: src/Buffer.cpp:4818 src/Buffer.cpp:4831
+#: src/Buffer.cpp:4821 src/Buffer.cpp:4834
msgid "&Remove"
msgstr "删除(&R)"
#: src/frontends/qt/ui/BranchesUi.ui:169
msgid "Reset branch color to default (standard background)"
-msgstr ""
+msgstr "重置分支颜色至默认(标准背景)"
#: src/frontends/qt/ui/BranchesUi.ui:172
#, fuzzy
msgstr "添加所有(&L)"
#: src/frontends/qt/ui/BranchesUnknownUi.ui:58 src/Buffer.cpp:1483
-#: src/Buffer.cpp:4792 src/Buffer.cpp:4902 src/LyXVC.cpp:114 src/LyXVC.cpp:310
+#: src/Buffer.cpp:4795 src/Buffer.cpp:4905 src/LyXVC.cpp:114 src/LyXVC.cpp:310
#: src/buffer_funcs.cpp:56 src/frontends/qt/GuiBranches.cpp:226
#: src/frontends/qt/GuiClipboard.cpp:252 src/frontends/qt/GuiDocument.cpp:3026
#: src/frontends/qt/GuiParagraph.cpp:177 src/frontends/qt/GuiPrefs.cpp:3332
-#: src/frontends/qt/GuiPrefs.cpp:3355 src/frontends/qt/GuiView.cpp:2904
-#: src/frontends/qt/GuiView.cpp:3067 src/frontends/qt/GuiView.cpp:3297
-#: src/frontends/qt/GuiView.cpp:3321 src/frontends/qt/GuiView.cpp:3335
-#: src/frontends/qt/GuiView.cpp:3439 src/frontends/qt/GuiView.cpp:3484
-#: src/frontends/qt/GuiView.cpp:3539 src/frontends/qt/GuiView.cpp:3773
-#: src/frontends/qt/GuiView.cpp:3787 src/frontends/qt/GuiView.cpp:3906
-#: src/frontends/qt/GuiView.cpp:3931 src/frontends/qt/GuiView.cpp:4637
-#: src/frontends/qt/GuiView.cpp:4644 src/insets/InsetBibtex.cpp:153
+#: src/frontends/qt/GuiPrefs.cpp:3355 src/frontends/qt/GuiView.cpp:2908
+#: src/frontends/qt/GuiView.cpp:3071 src/frontends/qt/GuiView.cpp:3301
+#: src/frontends/qt/GuiView.cpp:3325 src/frontends/qt/GuiView.cpp:3339
+#: src/frontends/qt/GuiView.cpp:3443 src/frontends/qt/GuiView.cpp:3488
+#: src/frontends/qt/GuiView.cpp:3543 src/frontends/qt/GuiView.cpp:3777
+#: src/frontends/qt/GuiView.cpp:3791 src/frontends/qt/GuiView.cpp:3910
+#: src/frontends/qt/GuiView.cpp:3935 src/frontends/qt/GuiView.cpp:4641
+#: src/frontends/qt/GuiView.cpp:4648 src/insets/InsetBibtex.cpp:153
msgid "&Cancel"
msgstr "取消(&C)"
#: src/frontends/qt/ui/ChangeTrackingUi.ui:30
msgid "If checked, changes will be shown in the PDF/DVI/PS output"
-msgstr ""
+msgstr "如果勾选,更改将在PDF/DVI/PS输出中显示"
#: src/frontends/qt/ui/ChangeTrackingUi.ui:33
#, fuzzy
#: src/frontends/qt/ui/ChangeTrackingUi.ui:40
msgid "Use change bars in addition to change tracking markup"
-msgstr ""
+msgstr "除了使用更改跟踪标记外,还使用更改线"
#: src/frontends/qt/ui/ChangeTrackingUi.ui:43
#, fuzzy
msgstr "字体属性"
#: src/frontends/qt/ui/CharacterUi.ui:36 src/frontends/qt/ui/CharacterUi.ui:55
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:488
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:481
msgid "Font family"
msgstr "字体族"
msgstr "系列(&S)"
#: src/frontends/qt/ui/CharacterUi.ui:88 src/frontends/qt/ui/CharacterUi.ui:107
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:523
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:495
msgid "Font shape"
msgstr "字体形状"
#: src/frontends/qt/ui/CharacterUi.ui:114
#: src/frontends/qt/ui/CharacterUi.ui:133
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:537
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:530
msgid "Font size"
msgstr "字体大小"
#: src/frontends/qt/ui/CharacterUi.ui:159
#: src/frontends/qt/ui/CharacterUi.ui:178
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:467
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:488
msgid "Font color"
msgstr "字体颜色"
msgstr "语言(&L):"
#: src/frontends/qt/ui/CharacterUi.ui:281
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:495 lib/layouts/bicaption.module:16
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:509 lib/layouts/bicaption.module:16
#: lib/layouts/europasscv.layout:441 lib/layouts/europasscv.layout:476
#: lib/layouts/europasscv.layout:483 lib/layouts/europecv.layout:322
#: lib/layouts/europecv.layout:328 lib/layouts/moderncv.layout:581
#: src/frontends/qt/ui/CompareUi.ui:145
msgid "Specify the original version of the document here (comparison source)"
-msgstr ""
+msgstr "在此处指定文档的原始版本(比较源)"
#: src/frontends/qt/ui/CompareUi.ui:155 src/frontends/qt/ui/PrefUi.ui:51
msgid "Bro&wse..."
#: src/frontends/qt/ui/CompareUi.ui:181
msgid "Specify the modified version of the document here (comparison target)"
-msgstr ""
+msgstr "在此处指定文档的修改版本(比较目标)"
#: src/frontends/qt/ui/CompareUi.ui:191 src/frontends/qt/ui/ExternalUi.ui:89
#: src/frontends/qt/ui/GraphicsUi.ui:75 src/frontends/qt/ui/IncludeUi.ui:28
#: src/frontends/qt/ui/CompareUi.ui:227 src/frontends/qt/ui/CompareUi.ui:240
msgid ""
"Changes in the workarea are allocated to the selected author or category"
-msgstr ""
+msgstr "工作区中的更改被分配给所选作者或类别"
#: src/frontends/qt/ui/CompareUi.ui:230
#, fuzzy
#: src/frontends/qt/ui/CounterUi.ui:63
msgid "Select the action to perform on selected counter"
-msgstr ""
+msgstr "选择对所选计数器执行的操作"
#: src/frontends/qt/ui/CounterUi.ui:79
msgid ""
"If checked, modification affects the counter only in the LyX workarea, not "
"in the output"
-msgstr ""
+msgstr "如果已勾选,修改仅影响 LyX 工作区中的计数器,而不影响输出"
+
#: src/frontends/qt/ui/CounterUi.ui:85
#, fuzzy
msgstr "只搜索完全符合的字词"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:153
-#: src/frontends/qt/ui/SearchUi.ui:241 src/frontends/qt/GuiSearch.cpp:101
+#: src/frontends/qt/ui/SearchUi.ui:241 src/frontends/qt/GuiSearch.cpp:98
#, fuzzy
msgid "Wh&ole words"
msgstr "全字匹配(&H)"
msgstr "区分大小写(&S)"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:205
-#: src/frontends/qt/FindAndReplace.cpp:713
+#: src/frontends/qt/FindAndReplace.cpp:716
#, fuzzy
msgid "Find next occurrence (Enter, backwards: Shift+Enter)"
msgstr "查找下一项[回车]"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:208
-#: src/frontends/qt/ui/SearchUi.ui:190 src/frontends/qt/FindAndReplace.cpp:712
+#: src/frontends/qt/ui/SearchUi.ui:190 src/frontends/qt/FindAndReplace.cpp:715
#, fuzzy
msgid "Find &>"
msgstr "查找(&F):"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:221
-#: src/frontends/qt/FindAndReplace.cpp:715
+#: src/frontends/qt/FindAndReplace.cpp:718
#, fuzzy
msgid "Replace and find next occurrence (Enter, backwards: Shift+Enter)"
msgstr "替换并查找下一项[回车]"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:224
-#: src/frontends/qt/FindAndReplace.cpp:714
+#: src/frontends/qt/FindAndReplace.cpp:717
#, fuzzy
msgid "Rep&lace >"
msgstr "替换(&R)"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:413
msgid "Do not search in content that is not output (e.g., notes)"
-msgstr ""
+msgstr "不要在未输出的内容(如注释)中进行搜索"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:416
msgid "Ignore &non-output content"
msgid ""
"If the search string is formatted in a non-default way, only find strings "
"formatted like the search string in the checked respects"
-msgstr ""
+msgstr "如果搜索字符串以非默认方式格式化,则仅查找在所选方面格式类似于搜索字符串的字符串"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:441
msgid "Adhe&re to search string formatting of"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:453
#, fuzzy
-msgid "Strike-through"
-msgstr "å\88 é\99¤çº¿(&T):"
+msgid "Sectioning markup"
+msgstr "å\88\86è\8a\82"
#: src/frontends/qt/ui/FindAndReplaceUi.ui:460
+#, fuzzy
+msgid "Deletion (change)"
+msgstr " (已改变)"
+
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:467
msgid "Font series[[FindReplaceAdv]]"
msgstr ""
msgid "Emph/noun"
msgstr "noun"
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:481
-#, fuzzy
-msgid "Dese&lect all"
-msgstr "全选"
-
#: src/frontends/qt/ui/FindAndReplaceUi.ui:502
#, fuzzy
-msgid "Sectioning markup"
-msgstr "å\88\86è\8a\82"
+msgid "Strike-through"
+msgstr "å\88 é\99¤çº¿(&T):"
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:509
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:516
#, fuzzy
-msgid "Deletion (change)"
-msgstr " (已改变)"
+msgid "Dese&lect all"
+msgstr "全选"
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:516
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:523
#, fuzzy
msgid "Underlining"
msgstr "下划线(&N):"
-#: src/frontends/qt/ui/FindAndReplaceUi.ui:530
+#: src/frontends/qt/ui/FindAndReplaceUi.ui:537
#, fuzzy
msgid "&Select all"
msgstr "全选"
#: src/frontends/qt/ui/FloatPlacementUi.ui:124
msgid "Right-align float contents"
-msgstr ""
+msgstr "右对齐浮动内容"
#: src/frontends/qt/ui/FloatPlacementUi.ui:127
#, fuzzy
msgid ""
"Select the roman (serif) typeface. To filter the list of fonts, just start "
"typing while the list is expanded."
-msgstr ""
+msgstr "选择罗马(衬线)字体。要在字体列表中进行筛选,只需在列表展开时开始输入即可。"
#: src/frontends/qt/ui/FontUi.ui:142
msgid "Use a real small caps shape, if the font provides one"
msgid ""
"Select the Sans Serif (grotesque) typeface. To filter the list of fonts, "
"just start typing while the list is expanded."
-msgstr ""
+msgstr "选择无衬线(哥特式)字体。要在字体列表中进行筛选,只需在列表展开时开始输入即可。"
#: src/frontends/qt/ui/FontUi.ui:237
msgid "S&cale (%):"
msgid ""
"Select the typewriter (monospaced) typeface. To filter the list of fonts, "
"just start typing while the list is expanded."
-msgstr ""
+msgstr "选择等宽字体。要在字体列表中进行筛选,只需在列表展开时开始输入即可。"
#: src/frontends/qt/ui/FontUi.ui:345
msgid "Sc&ale (%):"
#: src/frontends/qt/ui/GraphicsUi.ui:589
msgid ""
"If LyX uses a dark theme, revert the colors of this graphics in the workarea"
-msgstr ""
+msgstr "如果 LyX 使用深色主题,则反转工作区中此图形的颜色"
#: src/frontends/qt/ui/GraphicsUi.ui:592
msgid "Re&vert colors in dark mode"
#: src/frontends/qt/ui/HSpaceUi.ui:128
msgid "Prevent automatic line break at the space"
-msgstr ""
+msgstr "防止在空格处自动换行"
#: src/frontends/qt/ui/HyperlinkUi.ui:24 src/frontends/qt/ui/HyperlinkUi.ui:61
#: lib/layouts/acmart.layout:725 lib/layouts/acmart.layout:743
msgid ""
"Link to the web or any other target with an \"authority\" component (i."
"e., :// in the URI)"
-msgstr ""
+msgstr "使用包含“权威”组件(即URI中的://)的链接指向网络或其他目标。"
#: src/frontends/qt/ui/HyperlinkUi.ui:136
msgid "&Web"
msgid ""
"Link to an arbitrary URI scheme not matched by the other three types (to be "
"fully spelled out in the Target field above)"
-msgstr ""
+msgstr "链接到未被其他三种类型匹配的任意 URI 方案(需在上面的目标字段中完整拼写)"
#: src/frontends/qt/ui/HyperlinkUi.ui:169
msgid "&Other[[Link Type]]"
msgid "I&nclude Type:"
msgstr "包含类别(&I)"
-#: src/frontends/qt/ui/IncludeUi.ui:46 src/insets/InsetInclude.cpp:418
+#: src/frontends/qt/ui/IncludeUi.ui:46 src/insets/InsetInclude.cpp:428
msgid "Include"
msgstr "包含"
-#: src/frontends/qt/ui/IncludeUi.ui:51 src/insets/InsetInclude.cpp:408
+#: src/frontends/qt/ui/IncludeUi.ui:51 src/insets/InsetInclude.cpp:418
msgid "Input"
msgstr "输入"
#: src/frontends/qt/ui/IncludeUi.ui:56 lib/layouts/stdlayouts.inc:69
-#: src/insets/InsetInclude.cpp:411
+#: src/insets/InsetInclude.cpp:421
msgid "Verbatim"
msgstr "忠实原文(Verbatim)"
-#: src/frontends/qt/ui/IncludeUi.ui:61 src/insets/InsetInclude.cpp:1440
-#: src/insets/InsetInclude.cpp:1446
+#: src/frontends/qt/ui/IncludeUi.ui:61 src/insets/InsetInclude.cpp:1448
+#: src/insets/InsetInclude.cpp:1466
msgid "Program Listing"
msgstr "程序列表"
msgid ""
"File name to include. (You can create a new file by entering the name of one "
"that does not yet exist.)"
-msgstr ""
+msgstr "要包含的文件名。(您可以通过输入一个尚不存在的文件名来创建新文件。)"
#: src/frontends/qt/ui/IncludeUi.ui:124
msgid "Underline spaces in generated output"
#: src/frontends/qt/ui/IndexUi.ui:68
msgid "If the entry spans multiple pages, you can start or end the range here"
-msgstr ""
+msgstr "如果条目跨越多页,您可在此处开始或结束范围"
#: src/frontends/qt/ui/IndexUi.ui:88 src/frontends/qt/ui/PageLayoutUi.ui:29
#: src/frontends/qt/ui/PrefFileformatsUi.ui:20
msgid ""
"Customize the format of the page number here. Note that the format is not "
"used with \"See\" and \"See also\" references."
-msgstr ""
+msgstr "在此处自定义页码格式。请注意,该格式不用于“参见”和“参阅”类引用。"
#: src/frontends/qt/ui/IndexUi.ui:105
msgid "Enter custom command here (without leading backslash)."
-msgstr ""
+msgstr "在此处输入自定义命令(无需前置反斜杠)。"
#: src/frontends/qt/ui/IndicesUi.ui:19
msgid ""
msgid ""
"Select the type of information to be output. Then specify the requested "
"information below."
-msgstr ""
+msgstr "选择要输出的信息类型。然后在下方指定所需信息。"
#: src/frontends/qt/ui/InfoUi.ui:49 src/frontends/qt/GuiInfo.cpp:362
#, fuzzy
#: src/frontends/qt/ui/InfoUi.ui:59 src/frontends/qt/GuiInfo.cpp:361
msgid "Here you can enter a fixed date (in ISO format: YYYY-MM-DD)"
-msgstr ""
+msgstr "在此处您可以输入一个固定日期(ISO 格式:YYYY-MM-DD)"
#: src/frontends/qt/ui/InfoUi.ui:70
#, fuzzy
"Attempt to display formatted cross-references as they would appear in the "
"output, e.g., as \"Theorem 1\" rather than just as the label."
msgstr ""
+"尝试按照其在输出中显示的样子来展示格式化交叉引用,例如,显示为“Theorem 1”,"
+"而非仅显示标签。"
#: src/frontends/qt/ui/LaTeXUi.ui:214
msgid "Format cross-references in the &work area"
#: src/frontends/qt/ui/LanguageUi.ui:108
msgid "Select encoding of the generated LaTeX source (LaTeX input encoding)."
-msgstr ""
+msgstr "选择生成的 LaTeX 源代码的编码(LaTeX 输入编码)。"
#: src/frontends/qt/ui/LanguageUi.ui:121
msgid "Select Unicode encoding variant."
-msgstr ""
+msgstr "选择Unicode编码变体。"
#: src/frontends/qt/ui/LanguageUi.ui:131
msgid "Specify whether to load the 'inputenc' package."
-msgstr ""
+msgstr "指定是否加载 'inputenc' 包。"
#: src/frontends/qt/ui/LanguageUi.ui:141
#, fuzzy
#: src/frontends/qt/ui/LocalLayoutUi.ui:74 src/frontends/qt/ui/PreambleUi.ui:49
msgid "Editor for LaTeX (plain) format will be used"
-msgstr ""
+msgstr "将使用 LaTeX(纯文本)格式的编辑器"
#: src/frontends/qt/ui/LocalLayoutUi.ui:77 src/frontends/qt/ui/PreambleUi.ui:52
#: src/frontends/qt/GuiDocument.cpp:606 src/frontends/qt/GuiDocument.cpp:786
#: src/frontends/qt/ui/LogUi.ui:111
msgid "Hit Enter or click 'Find Next' to search"
-msgstr ""
+msgstr "按“Enter”键或单击“查找下一个”开始搜索"
#: src/frontends/qt/ui/LogUi.ui:118
msgid "Find &Next"
msgid ""
"Determines whether only personal user files, system files or all files are "
"displayed"
-msgstr ""
+msgstr "决定仅显示个人用户文件、系统文件还是所有文件"
#: src/frontends/qt/ui/LyXFilesUi.ui:72 src/frontends/qt/ui/RefUi.ui:82
msgid "Filter case-sensitively"
#: src/frontends/qt/ui/LyXFilesUi.ui:110
msgid "The available language(s) of the selected file will be displayed here"
-msgstr ""
+msgstr "所选文件可用的语言将在此处显示"
#: src/frontends/qt/ui/MarginsUi.ui:38
#, fuzzy
msgid ""
"Here you can set up the handling of counters and references with regard to "
"the excluded child documents."
-msgstr ""
+msgstr "在此处您可以针对排除的子文档设置计数器和引用的处理方式"
#: src/frontends/qt/ui/MasterChildUi.ui:58
#, fuzzy
"document.<br>This is the fastest method. Use this if you do not need correct "
"counter values and references."
msgstr ""
+"将忽略排除的子文档的所有计数器和引用,因此输出中的计数器将与完整文档的输出不同。"
+"<br>这是最快的方法。如果您不需要正确的计数器值和引用,请使用此方法。"
#: src/frontends/qt/ui/MasterChildUi.ui:67
msgid "Do ¬ maintain (fast)"
"is significantly faster than \"Strictly maintain\". Use this if you need "
"correct counters and more or less correct references."
msgstr ""
+"将为排除的子文档设置一次计数器和引用,并在排除的文档被修改时进行调整。"
+"这在大多数情况下可以正确设置计数器和引用,但不会调整由于包含文件更改而导致的未包含子项的页面引用。"
+"<br>这比“严格维护”快得多。如果您需要正确的计数器和或多或少正确的引用,请使用此方法。"
#: src/frontends/qt/ui/MasterChildUi.ui:77
msgid "Maintain mostl&y (medium)"
"document. This can be much slower than the first two methods.<br>Use this if "
"you absolutely need correct counters."
msgstr ""
+"确保所有计数器和引用与完整文档完全相同。这可能比前两种方法慢得多。"
+"<br>如果您绝对需要正确的计数器,请使用此方法。"
#: src/frontends/qt/ui/MasterChildUi.ui:87
msgid "Strictly &maintain (slow)"
"Line numbering (lineno package) options (e.g. right, modulo, switch(*), "
"pagewise). Please refer to the lineno package manual for details."
msgstr ""
+"行号标注(lineno包)选项(例如:right,modulo,switch(*),pagewise)。"
+"详细信息请参阅lineno包手册。"
#: src/frontends/qt/ui/NumberingUi.ui:82
msgid "&List in Table of Contents"
"out of moving arguments such as sections and captions. This prevents LaTeX "
"errors that can happen in such cases. It is recommended to keep this on."
msgstr ""
+"如果选中此选项,将移动标签和索引条目等易碎项目,使其脱离章节和标题等移动参数。"
+"这样可以防止在这种情况下可能出现的LaTeX错误。建议保持此选项开启。"
#: src/frontends/qt/ui/OutputUi.ui:125
msgid "Put fra&gile content out of moving arguments"
"Namespace prefix to use for MathML formulae. For instance, with the <code>m</"
"code> prefix, the MathML tags will be output like <code>m:math</code>."
msgstr ""
+"用于MathML公式所使用的命名空间前缀。例如,使用<code>m</code>前缀时,MathML标签将输出为<code>m:math</"
+"code>的形式。"
#: src/frontends/qt/ui/OutputUi.ui:327
msgid "No prefix (namespace defined inline for each tag)"
-msgstr ""
+msgstr "无前缀(每个标签内联定义命名空间)"
#: src/frontends/qt/ui/OutputUi.ui:332
#, fuzzy
#: src/frontends/qt/ui/PDFSupportUi.ui:461
msgid ""
"Additional hyperref options (comma-separated) to be passed via \\hypersetup."
-msgstr ""
+msgstr "通过 \\hypersetup 传递的其他超链接选项(以逗号分隔)。"
#: src/frontends/qt/ui/PDFSupportUi.ui:464
msgid "Hyperse&tup"
#: src/frontends/qt/ui/PDFSupportUi.ui:487
msgid ""
"Document metadata and PDF settings (as specified in LaTeX 06/2022 and later)"
-msgstr ""
+msgstr "文档元数据和PDF设置(如LaTeX 2022年06月及以后版本中所指定)"
#: src/frontends/qt/ui/PDFSupportUi.ui:490
#, fuzzy
msgid ""
"If this is checked, additions in change tracking are underlined in the "
"workarea"
-msgstr ""
+msgstr "如果勾选此项,在工作区中会以下划线形式显示更改跟踪中的添加内容"
#: src/frontends/qt/ui/PrefDisplayUi.ui:157
msgid "&Underline change tracking additions"
"emergency file (named filename.lyx.emergency) fails, this snapshot can be at "
"rescue."
msgstr ""
+"如果选中此选项,LyX将在给定间隔内保存已更改文档的临时副本(作为#filename.lyx#存储在"
+"指定目录中)。与上述备份不同,当保存更改时,此快照将被删除。如果应用程序崩溃且未保存更改,"
+"并且从应急文件(名为filename.lyx.emergency)恢复失败,此快照可以用于救援。"
#: src/frontends/qt/ui/PrefDocHandlingUi.ui:106
msgid "Make a&uto-save snapshots every[[ N minutes]]"
"paste operations and when moving content from/to insets if change tracking "
"is deactivated."
msgstr ""
+"如果勾选此项,当更改跟踪处于非激活状态时,复制/粘贴操作以及在嵌入内容之间移动内容时,"
+"将不会解析更改跟踪标记。"
#: src/frontends/qt/ui/PrefEditUi.ui:93
msgid "&Keep change tracking markup on copy and paste"
"clicking on \"Try to Open Citation Content...\" in the citation context "
"menu. Note the security implications described in User Guide, 6.6.4."
msgstr ""
+"如果启用此功能,当在引用上下文菜单中单击“尝试打开引用内容…”时,"
+"LyX将搜索磁盘上的匹配文件。请注意《用户指南》6.6.4中描述的安全影响。"
#: src/frontends/qt/ui/PrefEditUi.ui:122
#, fuzzy
#: src/frontends/qt/ui/PrefEditUi.ui:157
msgid "Define search pattern (see UserGuide for syntax)"
-msgstr ""
+msgstr "定义搜索模式(参见用户指南以了解语法)"
#: src/frontends/qt/ui/PrefEditUi.ui:170
msgid "Cursor width (&pixels):"
#: src/frontends/qt/ui/PrefEditUi.ui:223 src/frontends/qt/ui/PrefEditUi.ui:249
msgid "Limit the width of the text in the work area to the specified length"
-msgstr ""
+msgstr "将工作区中文本的宽度限制为指定长度"
#: src/frontends/qt/ui/PrefEditUi.ui:226
msgid "&Limit text width"
#: src/frontends/qt/ui/PrefIdentityUi.ui:63
msgid "Initials of your name"
-msgstr ""
+msgstr "您名字的首字母"
#: src/frontends/qt/ui/PrefIdentityUi.ui:72
msgid "&E-mail:"
msgid ""
"Select to use the current keyboard language, as set from the operating "
"system, as default input language."
-msgstr ""
+msgstr "选择使用当前从操作系统设置的键盘语言作为默认输入语言。"
#: src/frontends/qt/ui/PrefLanguageUi.ui:202
#, fuzzy
msgid ""
"Specify here how the arrow keys behave within scripts with right-to-left "
"direction"
-msgstr ""
+msgstr "在此处指定在具有从右至左方向的脚本中箭头键的行为"
#: src/frontends/qt/ui/PrefLanguageUi.ui:229
#, fuzzy
"to-left text in a left-to-right paragraph, the cursor starts at the right "
"when coming from the left)"
msgstr ""
+"光标遵循文本方向的逻辑(例如,在左至右段落中嵌入的从右至左文本中,"
+"光标从左侧进入时从右侧开始)"
#: src/frontends/qt/ui/PrefLanguageUi.ui:242
msgid "&Logical"
"text in a left-to-right paragraph, the cursor starts at the left when coming "
"from the left)"
msgstr ""
+"光标遵循视觉方向(例如,在左至右段落中嵌入的从右至左文本中,光标从左侧进入时从左侧开始)"
#: src/frontends/qt/ui/PrefLanguageUi.ui:255
msgid "&Visual"
"dialog by default. \"Language default\" selects the appropriate separator "
"for the current language."
msgstr ""
+"在此处您可以指定表格对话框中默认使用的十进制分隔符。“语言默认”选项"
+"会选择与当前语言相应的分隔符。"
#: src/frontends/qt/ui/PrefLanguageUi.ui:289
msgid "Default decimal &separator:"
"This requires 'Backup original documents when saving' in Look & Feel > "
"Document Handling to be checked."
msgstr ""
+"如果此处指定了路径,所有 LyX 文件的备份都将存储在那里。如果没有给出路径,"
+"则备份将与原始文档一起存储。这需要在“外观和感觉”>“文档处理”中选中“保存时备份原始文档”。"
#: src/frontends/qt/ui/PrefPathsUi.ui:156
msgid "&Backup directory:"
"You can set a custom style here. Note that only certain styles may support "
"dark mode, e.g. fusion on Windows."
msgstr ""
+"您可以在此处设置自定义样式。请注意,只有某些样式可能支持深色模式,"
+"例如Windows上的Fusion风格。"
#: src/frontends/qt/ui/PrefUi.ui:126
msgid "Context Help"
msgid "Find previous occurrence (Shift+Enter)"
msgstr "查找下一项[回车]"
-#: src/frontends/qt/ui/SearchUi.ui:55 src/frontends/qt/FindAndReplace.cpp:707
+#: src/frontends/qt/ui/SearchUi.ui:55 src/frontends/qt/FindAndReplace.cpp:710
#, fuzzy
msgid "&< Find"
msgstr "查找(&F):"
#: src/frontends/qt/ui/SearchUi.ui:100 src/frontends/qt/GuiSearch.cpp:217
msgid "Hide replace and option widgets"
-msgstr ""
+msgstr "隐藏替换和选项小部件"
#: src/frontends/qt/ui/SearchUi.ui:103 src/frontends/qt/GuiSearch.cpp:216
#, fuzzy
#: src/frontends/qt/ui/SearchUi.ui:228
msgid "Treat uppercase/lowercase writing as distinct"
-msgstr ""
+msgstr "区分大小写书写"
-#: src/frontends/qt/ui/SearchUi.ui:231 src/frontends/qt/GuiSearch.cpp:99
+#: src/frontends/qt/ui/SearchUi.ui:231 src/frontends/qt/GuiSearch.cpp:96
#, fuzzy
msgid "&Case sensitive[[search]]"
msgstr "区分大小写(&S)"
#: src/frontends/qt/ui/SearchUi.ui:248
msgid "Limit search and replace to selection"
-msgstr ""
+msgstr "将搜索和替换限制在所选范围内"
-#: src/frontends/qt/ui/SearchUi.ui:251 src/frontends/qt/GuiSearch.cpp:103
+#: src/frontends/qt/ui/SearchUi.ui:251 src/frontends/qt/GuiSearch.cpp:100
#, fuzzy
msgid "Selection onl&y"
msgstr "选中文本(S)|S"
#: src/frontends/qt/ui/SearchUi.ui:258
msgid "If this is checked, LyX will search forward immediately"
-msgstr ""
+msgstr "如果选中此选项,LyX将立即向前搜索"
-#: src/frontends/qt/ui/SearchUi.ui:261 src/frontends/qt/GuiSearch.cpp:105
+#: src/frontends/qt/ui/SearchUi.ui:261 src/frontends/qt/GuiSearch.cpp:102
#, fuzzy
msgid "Search as yo&u type"
msgstr "输入时搜索(&T)"
#: src/frontends/qt/ui/SearchUi.ui:268
msgid "If the end/start of the document is reached, automatically wrap around"
-msgstr ""
+msgstr "若到达文档结尾/起始处,自动循环滚动"
-#: src/frontends/qt/ui/SearchUi.ui:271 src/frontends/qt/GuiSearch.cpp:107
+#: src/frontends/qt/ui/SearchUi.ui:271 src/frontends/qt/GuiSearch.cpp:104
#, fuzzy
msgid "&Wrap"
msgstr "折行"
#: src/frontends/qt/ui/SpellcheckerUi.ui:77
msgid "Skip this match and go to next misspelling"
-msgstr ""
+msgstr "跳过此匹配项并转到下一个拼写错误"
#: src/frontends/qt/ui/SpellcheckerUi.ui:80
msgid "S&kip"
-msgstr ""
+msgstr "跳过"
#: src/frontends/qt/ui/SpellcheckerUi.ui:87
#, fuzzy
#: src/frontends/qt/ui/SpellcheckerUi.ui:97
msgid "Skips all occurrences of this word within the current session."
-msgstr ""
+msgstr "在当前会话中跳过此单词的所有出现情况。"
#: src/frontends/qt/ui/SpellcheckerUi.ui:100
msgid "Skip A&ll"
-msgstr ""
+msgstr "跳过全部"
#: src/frontends/qt/ui/SpellcheckerUi.ui:110
msgid "Replace with selected word"
#: src/frontends/qt/ui/SpellcheckerUi.ui:165
msgid ""
"Ignore this occurrence of the word permanently (saved as a text property)."
-msgstr ""
+msgstr "永久忽略此词出现(作为文本属性保存)。"
#: src/frontends/qt/ui/SpellcheckerUi.ui:168
msgid "Ign&ore"
-msgstr ""
+msgstr "忽略"
#: src/frontends/qt/ui/SpellcheckerUi.ui:175
msgid ""
"Ignore all occurrences of this word within this document. This persists "
"beyond the current session."
-msgstr ""
+msgstr "在此文档中忽略此词的所有出现情况。这会持续到当前会话之外。"
#: src/frontends/qt/ui/SpellcheckerUi.ui:178
msgid "I&gnore All"
msgid ""
"If this is checked, the table will be reset to the formal default style "
"(only top and bottom row have horizontal lines)"
-msgstr ""
+msgstr "如果勾选,表格将重置为正式的默认样式(仅顶部和底部行有水平线)"
#: src/frontends/qt/ui/TabularUi.ui:1138
#, fuzzy
msgid ""
"Filter items that are not output (in notes, inactive branches, deleted in "
"change tracking, etc.)"
-msgstr ""
+msgstr "过滤不在输出中(如注释中、非活动分支内、更改跟踪中已删除等)的项目"
#: src/frontends/qt/ui/TocUi.ui:317 src/frontends/qt/TocWidget.cpp:99
#, fuzzy
#: src/frontends/qt/ui/TocUi.ui:327
msgid "Only non-output items"
-msgstr ""
+msgstr "仅非输出项"
#: src/frontends/qt/ui/TocUi.ui:335
msgid "Sho&w:"
msgid "Select the output format"
msgstr "选择输出格式"
-#: src/frontends/qt/ui/WorkAreaUi.ui:82 src/frontends/qt/GuiView.cpp:3931
-#: src/frontends/qt/GuiView.cpp:4637
+#: src/frontends/qt/ui/WorkAreaUi.ui:82 src/frontends/qt/GuiView.cpp:3935
+#: src/frontends/qt/GuiView.cpp:4641
msgid "&Reload"
msgstr "重新加载(&R)"
#: lib/citeengines/biblatex-natbib.citeengine:143
#: lib/citeengines/biblatex.citeengine:133 lib/layouts/numreport.inc:44
-#: lib/layouts/stdcounters.inc:90
+#: lib/layouts/stdcounters.inc:91
msgid "Footnote"
msgstr "脚注"
#: lib/layouts/simplecv.layout:213 lib/layouts/stdstruct.inc:94
#: lib/layouts/svcommon.inc:684
msgid "LaTeX code to be inserted before the first bibliography item"
-msgstr ""
+msgstr "要插入在首个参考文献条目之前的LaTeX代码"
#: lib/layouts/IEEEtran.layout:425
msgid "Biography"
#: lib/layouts/aastex.layout:668
msgid "Separate the recognized name of an object from text"
-msgstr ""
+msgstr "将识别出的对象名称与文本分开"
#: lib/layouts/aastex.layout:683
msgid "Dataset"
#: lib/layouts/aastex62.layout:162
msgid "Enter the 16 digit ORCID as xxxx-xxxx-xxxx-xxxx"
-msgstr ""
+msgstr "输入16位ORCID,格式为xxxx-xxxx-xxxx-xxxx"
#: lib/layouts/aastex62.layout:177 lib/layouts/apa.layout:197
#: lib/layouts/apax.inc:177 lib/layouts/copernicus.layout:90
#: lib/layouts/stdlists.inc:81 lib/layouts/stdlists.inc:128
#: lib/layouts/stdlyxlist.inc:24 lib/layouts/theorems-case.inc:63
msgid "LaTeX code to be inserted before the first item"
-msgstr ""
+msgstr "插入首项之前的 LaTeX 代码"
#: lib/layouts/amsdefs.inc:42
msgid "Short title which appears in the running headers"
#: lib/layouts/beamer.layout:772 lib/layouts/powerdot.layout:533
msgid "Number of slide where the context below the pause gets visible"
-msgstr ""
+msgstr "暂停后下方内容幻灯片编号可见"
#: lib/layouts/beamer.layout:783 lib/layouts/powerdot.layout:544
msgid "_ _ _ _ _ _ _ _ _ _ _ _ _ _"
"Support for the chessboard package to print chess games See File > Open "
"Example > Articles > Chess where you will find Game 1 and Game 2."
msgstr ""
+"支持使用chessboard包打印国际象棋对局。请参见“文件”>“打开示例”>“文章”>"
+"“国际象棋”,在那里您可以找到“Game 1”和“Game 2”。"
#: lib/layouts/chessboard.module:16
msgid "NewChessGame"
#: lib/layouts/chessboard.module:33
msgid "See xskak manual for a comprehensive list of keys and values"
-msgstr ""
+msgstr "参见xskak手册获取完整的关键字与值列表"
#: lib/layouts/chessboard.module:62
#, fuzzy
msgid ""
"Here you can store chessboard settings under a style name for later reuse. "
"See chessboard manual for details."
-msgstr ""
+msgstr "此处您可以将棋盘设置存储于某一样式名下,以便后续复用。详情参见棋盘手册。"
#: lib/layouts/chessboard.module:137 lib/examples/Articles:0
#, fuzzy
#: lib/layouts/chessboard.module:141
msgid "See chessboard manual for a comprehensive list of keys and values"
-msgstr ""
+msgstr "参见棋盘手册获取完整的关键字与值列表"
#: lib/layouts/cl2emult.layout:3
msgid "Springer Contributed Books (cl2emult, Obsolete!)"
msgid ""
"identify the author with the corresponding affiliation. 1, 2, 3, etc. should "
"be inserted."
-msgstr ""
+msgstr "用相应的隶属关系识别作者。应插入数字1、2、3等。"
#: lib/layouts/copernicus.layout:102 lib/layouts/svcommon.inc:438
msgid "Running Title"
msgid "bysame"
msgstr "同上"
-#: lib/layouts/ectaart.layout:252 lib/layouts/stdcounters.inc:95
+#: lib/layouts/ectaart.layout:252 lib/layouts/stdcounters.inc:96
#, fuzzy
msgid "Footnote (Title)"
msgstr "脚注标签"
msgstr "公式编号会带上节号,例如第二节第一个公式为 2.1。"
#: lib/layouts/eqs-within-sections.module:17 lib/layouts/scrbook.layout:30
-#: lib/layouts/stdcounters.inc:85 src/insets/InsetRef.cpp:643
+#: lib/layouts/stdcounters.inc:86 src/insets/InsetRef.cpp:643
#: src/mathed/InsetMathRef.cpp:372
msgid "Equation"
msgstr "公式"
"need to add an endnotes list (Insert > List/Contents/References > Endnotes) "
"where you want the endnotes to appear."
msgstr ""
+"将所有脚注设为尾注。这会使用endnotes包,尽管存在一些局限性,但也适用于较早版本的"
+"LaTeX发行版。您需要在希望尾注出现的位置添加尾注列表(插入>列表/目录/参考文献>尾注)。"
#: lib/layouts/foottoenotez.module:2
msgid "Footnotes as Endnotes (Extended)"
-msgstr ""
+msgstr "脚注作为尾注(扩展)"
#: lib/layouts/foottoenotez.module:11
msgid ""
"LaTeX3).You will need to add an endnotes list (Insert > List/Contents/"
"References > Endnotes) where you want the endnotes to appear."
msgstr ""
+"将所有脚注设为尾注。这将使用enotez包,它比endnotes包(模块“脚注作为尾注(基础版)”)"
+"更为强大且可定制,但要求使用相当现代的LaTeX发行版(需支持LaTeX3)。您需要在希望"
+"尾注出现的位置添加尾注列表(插入>列表/目录/参考文献>尾注)。"
#: lib/layouts/frletter.layout:3 lib/examples/Articles:0
msgid "French Letter (frletter)"
#: lib/layouts/hpstatement.module:3 lib/layouts/linguistics.module:3
#: lib/layouts/rsphrase.module:3
msgid "Academic Field Specifics"
-msgstr ""
+msgstr "学术领域细节"
#: lib/layouts/hpstatement.module:8
#, fuzzy
#: lib/layouts/initials.module:2
msgid "Initials (Drop Caps)"
-msgstr ""
+msgstr "首字母(下沉式大写字母)"
#: lib/layouts/initials.module:7
#, fuzzy
#: lib/layouts/japanese-vertical.inc:20
msgid "Insert 'c' for centering, 'r' for flushright and 'l' for flushleft"
-msgstr ""
+msgstr "插入‘c’表示居中对齐,‘r’表示右对齐,‘l’表示左对齐"
#: lib/layouts/japanese-vertical.inc:25
msgid "Rensuji*"
#: lib/layouts/linguistics.module:125
msgid "Grammaticality judgment marker"
-msgstr ""
+msgstr "语法判断标记"
#: lib/layouts/linguistics.module:130
msgid "Custom Numbering|s"
#: lib/layouts/linguistics.module:233
msgid "Add the inter-linear gloss here"
-msgstr ""
+msgstr "在此处添加逐词注释"
#: lib/layouts/linguistics.module:240 lib/layouts/linguistics.module:241
#, fuzzy
#: lib/layouts/linguistics.module:289
msgid "Add the first inter-linear gloss line here"
-msgstr ""
+msgstr "在此处添加第一条逐词注释行"
#: lib/layouts/linguistics.module:296
#, fuzzy
#: lib/layouts/linguistics.module:377 lib/layouts/linguistics.module:379
msgid "DRS"
-msgstr ""
+msgstr "话语表述结构(DRS)"
#: lib/layouts/linguistics.module:380
msgid "Discourse Representation Structure|D"
-msgstr ""
+msgstr "话语表述结构"
#: lib/layouts/linguistics.module:392 lib/layouts/linguistics.module:539
#, fuzzy
#: lib/layouts/moderncv.layout:437
msgid "Degree or job title"
-msgstr ""
+msgstr "学位或职务头衔"
#: lib/layouts/moderncv.layout:447
#, fuzzy
#: lib/layouts/moderncv.layout:464
msgid "Grade or other info"
-msgstr ""
+msgstr "等级或其他信息"
#: lib/layouts/moderncv.layout:472
msgid "Entry:"
#: lib/layouts/pdfform.module:178
msgid "Popdown Box Style"
-msgstr ""
+msgstr "下拉框样式"
#: lib/layouts/pdfform.module:181
msgid "Default popdown box style"
-msgstr ""
+msgstr "默认下拉框样式"
#: lib/layouts/pdfform.module:184
msgid "Radio Box Style"
#: lib/layouts/powerdot.layout:656
msgid "Onslide"
-msgstr ""
+msgstr "Onslide"
#: lib/layouts/powerdot.layout:662
msgid "On Slides"
#: lib/layouts/powerdot.layout:664
msgid "Specify the overlay settings (see powerdot manual)"
-msgstr ""
+msgstr "指定覆盖层设置(参见powerdot手册)"
#: lib/layouts/powerdot.layout:671
msgid "Onslide+"
"characters. Uses the 'okumakro', 'luatexja-ruby', or 'ruby' package "
"(depending on the TeX engine) or a fallback definition."
msgstr ""
+"定义用于排版中文字符阅读辅助(如注音、平假名)的嵌入内容。根据所使用的TeX引擎,"
+"该定义会采用“okumakro”、“luatexja-ruby”或“ruby”包,或者使用备用定义。"
#: lib/layouts/ruby.module:26 lib/layouts/ruby.module:35
msgid "Ruby"
"markup provided by the Text Properties dialog, words marked-up with soul are "
"hyphenated."
msgstr ""
+"通过soul包定义用于高亮、加宽间距、划掉、下划线和大写/小写字母的文字样式。"
+"与“文本属性”对话框提供的标记相比,使用soul标记的单词可以进行连字符断行。"
#: lib/layouts/soul.module:17
#, fuzzy
msgid "(\\Alph{enumiv})"
msgstr "\\Alph{enumiv}."
-#: lib/layouts/stdcounters.inc:86
+#: lib/layouts/stdcounters.inc:82
+#, fuzzy
+msgid "Listing ##"
+msgstr "程序列表"
+
+#: lib/layouts/stdcounters.inc:87
msgid "Equation ##"
msgstr "公式 ##"
-#: lib/layouts/stdcounters.inc:91 lib/layouts/stdcounters.inc:96
+#: lib/layouts/stdcounters.inc:92 lib/layouts/stdcounters.inc:97
#, fuzzy
msgid "Footnote \\arabic{footnote}"
msgstr "\\arabic{footnote}"
-#: lib/layouts/stdcounters.inc:97
+#: lib/layouts/stdcounters.inc:98
msgid "\\fnsymbol{thanks}"
msgstr "\\fnsymbol{thanks}"
msgid "Nomenclature[[output]]"
msgstr "术语"
-#: lib/layouts/stdlayouts.inc:94 src/insets/InsetInclude.cpp:414
+#: lib/layouts/stdlayouts.inc:94 src/insets/InsetInclude.cpp:424
msgid "Verbatim*"
msgstr "Verbatim*"
#: lib/ui/stdtoolbars.inc:98
msgid "Apply recent text properties"
-msgstr ""
+msgstr "应用最近的文本属性"
#: lib/ui/stdtoolbars.inc:99
#, fuzzy
msgid "Table (CSV)"
msgstr "表格 (CSV)"
-#: lib/configure.py:872 src/frontends/qt/GuiView.cpp:1801
+#: lib/configure.py:872 src/frontends/qt/GuiView.cpp:1805
#: src/mathed/InsetMathMacroTemplate.cpp:538
msgid "LyX"
msgstr "LyX"
msgid "LyXBlogger"
msgstr "LyXBlogger"
-#: lib/configure.py:1285
+#: lib/configure.py:1291
msgid "gnuplot"
msgstr "gnuplot"
-#: lib/configure.py:1285
+#: lib/configure.py:1291
msgid "gnuplot|Gnuplot"
msgstr "gnuplot|Gnuplot"
-#: lib/configure.py:1385
+#: lib/configure.py:1398
msgid "LyX Archive (zip)"
msgstr "LyX 压缩文档 (zip)"
-#: lib/configure.py:1388
+#: lib/configure.py:1401
msgid "LyX Archive (tar.gz)"
msgstr "LyX 压缩文档 (tar.gz)"
msgid "External Material"
msgstr "外部材料"
-#: lib/examples/Articles:0
-#, fuzzy
-msgid "Feynman Diagrams"
-msgstr "Feynman 图|F"
-
-#: lib/examples/Articles:0
-#, fuzzy
-msgid "Instant Preview"
-msgstr "即时预览(&P):"
-
#: lib/examples/Articles:0
#, fuzzy
msgid "Itemize Bullets"
msgid "Minted File Listing"
msgstr "行内程序列表(&I)"
+#: lib/examples/Articles:0
+msgid "XY-Pic"
+msgstr ""
+
#: lib/examples/Articles:0
#, fuzzy
-msgid "Minted Listings"
-msgstr "程序列表的列表"
+msgid "Feynman Diagrams"
+msgstr "Feynman 图|F"
#: lib/examples/Articles:0
#, fuzzy
msgstr "图"
#: lib/examples/Articles:0
-msgid "XY-Pic"
-msgstr ""
+#, fuzzy
+msgid "Minted Listings"
+msgstr "程序列表的列表"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Instant Preview"
+msgstr "即时预览(&P):"
#: lib/examples/Articles:0
#, fuzzy
msgid "Mixing Japanese with other Languages (with CJKutf8)"
msgstr "多语言标题(C)|C"
-#: lib/examples/Articles:0
-msgid "Mixing Japanese with other Languages (with platex)"
-msgstr ""
-
#: lib/examples/Articles:0
#, fuzzy
msgid "Writing Armenian"
msgstr "亚美尼亚语"
+#: lib/examples/Articles:0
+msgid "Mixing Japanese with other Languages (with platex)"
+msgstr ""
+
#: lib/examples/Articles:0
#, fuzzy
msgid "Language Support"
msgid "Serial Letter 3"
msgstr "希伯来语信件"
-#: lib/examples/Articles:0
-msgid "Hazard and Precautionary Statements"
-msgstr "危害与预警警示语"
-
#: lib/examples/Articles:0
msgid "LilyPond Book"
msgstr "LilyPond 书刊"
msgstr "多语言标题"
#: lib/examples/Articles:0
-#, fuzzy
-msgid "Noweb2LyX"
-msgstr "Noweb"
+msgid "Hazard and Precautionary Statements"
+msgstr "危害与预警警示语"
#: lib/examples/Articles:0
msgid "Noweb Listerrors"
msgstr ""
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Noweb2LyX"
+msgstr "Noweb"
+
#: lib/examples/Articles:0 src/frontends/qt/GuiDocument.cpp:1825
msgid "Modules"
msgstr "模块"
#: lib/examples/Articles:0
#, fuzzy
-msgid "Beamer (Complex)"
-msgstr "Beamer 注释"
+msgid "Foils Landslide"
+msgstr "横向幻灯片"
#: lib/examples/Articles:0
#, fuzzy
#: lib/examples/Articles:0
#, fuzzy
-msgid "Foils Landslide"
-msgstr "横向幻灯片"
+msgid "Beamer (Complex)"
+msgstr "Beamer 注释"
#: lib/examples/Articles:0
#, fuzzy
#: lib/examples/Articles:0
#, fuzzy
-msgid "Hebrew Article (KOMA-Script)"
-msgstr "Beamer 文档 (KOMA-Script)"
-
-#: lib/examples/Articles:0
-#, fuzzy
-msgid "IEEE Transactions Conference"
-msgstr "IEEE Transactions Computer Society"
+msgid "Mathematical Monthly"
+msgstr "美国数学协会 (AMS) 文章"
#: lib/examples/Articles:0
#, fuzzy
#: lib/examples/Articles:0
#, fuzzy
-msgid "Mathematical Monthly"
-msgstr "美国数学协会 (AMS) 文章"
+msgid "IEEE Transactions Conference"
+msgstr "IEEE Transactions Computer Society"
#: lib/examples/Articles:0
#, fuzzy
#: lib/examples/Articles:0
#, fuzzy
-msgid "00 Main File"
-msgstr "文件丢失"
-
-#: lib/examples/Articles:0
-#, fuzzy
-msgid "01 Dedication"
-msgstr "献辞"
+msgid "Hebrew Article (KOMA-Script)"
+msgstr "Beamer 文档 (KOMA-Script)"
#: lib/examples/Articles:0
#, fuzzy
#: lib/examples/Articles:0
#, fuzzy
-msgid "03 Preface"
-msgstr "序言"
+msgid "07 Part"
+msgstr "部"
#: lib/examples/Articles:0
#, fuzzy
-msgid "04 Acknowledgements"
-msgstr "致谢"
+msgid "10 Glossary"
+msgstr "关闭"
#: lib/examples/Articles:0
#, fuzzy
-msgid "05 Contributor List"
-msgstr "è´¡ç\8c®è\80\85å\88\97表"
+msgid "04 Acknowledgements"
+msgstr "è\87´è°¢"
#: lib/examples/Articles:0
msgid "06 Acronym"
msgstr ""
-#: lib/examples/Articles:0
-#, fuzzy
-msgid "07 Part"
-msgstr "部"
-
#: lib/examples/Articles:0
#, fuzzy
msgid "08 Author"
#: lib/examples/Articles:0
#, fuzzy
-msgid "10 Glossary"
-msgstr "å\85³é\97"
+msgid "11 References"
+msgstr "å¼\95ç\94¨"
#: lib/examples/Articles:0
#, fuzzy
-msgid "11 References"
-msgstr "å¼\95ç\94¨"
+msgid "05 Contributor List"
+msgstr "è´¡ç\8c®è\80\85å\88\97表"
#: lib/examples/Articles:0
-msgid "05 Acronym"
-msgstr ""
+#, fuzzy
+msgid "01 Dedication"
+msgstr "献辞"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "00 Main File"
+msgstr "文件丢失"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "03 Preface"
+msgstr "序言"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "10 Solutions"
+msgstr "解答"
#: lib/examples/Articles:0
#, fuzzy
msgid "08 Appendix"
msgstr "附录"
+#: lib/examples/Articles:0
+msgid "05 Acronym"
+msgstr ""
+
#: lib/examples/Articles:0
#, fuzzy
msgid "09 Glossary"
#: lib/examples/Articles:0
#, fuzzy
-msgid "10 Solutions"
-msgstr "解答"
+msgid "Simple"
+msgstr "简单简历"
#: lib/examples/Articles:0
#, fuzzy
msgid "Colored"
msgstr "颜色"
-#: lib/examples/Articles:0
-#, fuzzy
-msgid "Simple"
-msgstr "简单简历"
-
#: lib/examples/Articles:0
#, fuzzy
msgid "Chapter 1"
#: lib/examples/Articles:0
#, fuzzy
-msgid "Japanese Article (Standard Class for LuaTeX%2C vertical Writing)"
-msgstr "日文文档 (标准类竖排)"
+msgid "Japanese Report (Standard Class for LuaTeX%2C vertical Writing)"
+msgstr "日文书刊 (标准类竖排)"
#: lib/examples/Articles:0
#, fuzzy
#: lib/examples/Articles:0
#, fuzzy
-msgid "Japanese Report (Standard Class for LuaTeX%2C vertical Writing)"
-msgstr "日文书刊 (标准类竖排)"
+msgid "Japanese Article (Standard Class for LuaTeX%2C vertical Writing)"
+msgstr "日文文档 (标准类竖排)"
#: lib/tabletemplates/Formal_with_Footline.lyx:0
#, fuzzy
msgid "\\begin_document is missing"
msgstr "\\begin_document 缺失"
-#: src/Buffer.cpp:1050 src/Buffer.cpp:3103
+#: src/Buffer.cpp:1050 src/Buffer.cpp:3104
msgid "Changes not shown in LaTeX output"
msgstr "改变项没有输出至 LaTeX 输出"
-#: src/Buffer.cpp:1051 src/Buffer.cpp:3104
+#: src/Buffer.cpp:1051 src/Buffer.cpp:3105
#, fuzzy
msgid ""
"Changes will not be highlighted in LaTeX output, because xcolor and ulem are "
"it."
msgstr "%1$s 来自较新版本的 LyX,,但 lyx2lyx 脚本无法转换。"
-#: src/Buffer.cpp:1470 src/Buffer.cpp:4802 src/Buffer.cpp:4911
+#: src/Buffer.cpp:1470 src/Buffer.cpp:4805 src/Buffer.cpp:4914
msgid "File is read-only"
msgstr "文件只读"
msgstr "覆盖已修改的文件?"
#: src/Buffer.cpp:1483 src/Exporter.cpp:50
-#: src/frontends/qt/GuiClipboard.cpp:252 src/frontends/qt/GuiView.cpp:3067
-#: src/frontends/qt/GuiView.cpp:3334 src/frontends/qt/GuiView.cpp:3439
+#: src/frontends/qt/GuiClipboard.cpp:252 src/frontends/qt/GuiView.cpp:3071
+#: src/frontends/qt/GuiView.cpp:3338 src/frontends/qt/GuiView.cpp:3443
msgid "&Overwrite"
msgstr "覆盖(&O)"
msgid "Could not run chktex successfully."
msgstr "无法正确执行 chktex。"
-#: src/Buffer.cpp:2781
+#: src/Buffer.cpp:2782
#, c-format
msgid "Don't know how to export to format: %1$s"
msgstr "不知道如何导出此格式: %1$s"
-#: src/Buffer.cpp:2860
+#: src/Buffer.cpp:2861
msgid "Branch state changes in master document"
msgstr "主文档分支状态改变"
-#: src/Buffer.cpp:2861
+#: src/Buffer.cpp:2862
#, c-format
msgid ""
"The state of the branch '%1$s' was changed in the master file. Please make "
"sure to save the master."
msgstr "分支“%1$s”的状态在主文件里已修改。请务必保存主文档。"
-#: src/Buffer.cpp:2930
+#: src/Buffer.cpp:2931
#, c-format
msgid "Error exporting to format: %1$s."
msgstr "导出此格式错误: %1$s."
-#: src/Buffer.cpp:2939
+#: src/Buffer.cpp:2940
msgid "Error generating literate programming code."
msgstr "不能生成文字化编程码。"
-#: src/Buffer.cpp:3028
+#: src/Buffer.cpp:3029
#, c-format
msgid "Branch \"%1$s\" already exists."
msgstr "分支“%1$s”已存在。"
-#: src/Buffer.cpp:3085
+#: src/Buffer.cpp:3086
msgid "Error viewing the output file."
msgstr "查看输出文件出错。"
-#: src/Buffer.cpp:3447 src/frontends/qt/GuiView.cpp:2884
+#: src/Buffer.cpp:3448 src/frontends/qt/GuiView.cpp:2888
#: src/frontends/qt/Validator.cpp:247 src/insets/ExternalSupport.cpp:394
-#: src/insets/InsetGraphics.cpp:697 src/insets/InsetInclude.cpp:606
+#: src/insets/InsetGraphics.cpp:697 src/insets/InsetInclude.cpp:616
msgid "Invalid filename"
msgstr "无效文件名"
-#: src/Buffer.cpp:3448 src/insets/ExternalSupport.cpp:395
-#: src/insets/InsetGraphics.cpp:698 src/insets/InsetInclude.cpp:607
+#: src/Buffer.cpp:3449 src/insets/ExternalSupport.cpp:395
+#: src/insets/InsetGraphics.cpp:698 src/insets/InsetInclude.cpp:617
msgid ""
"The following filename will cause troubles when running the exported file "
"through LaTeX: "
msgstr "以下文件名可能导致导出 LaTeX 时错误: "
-#: src/Buffer.cpp:3453 src/insets/ExternalSupport.cpp:400
-#: src/insets/InsetGraphics.cpp:705 src/insets/InsetInclude.cpp:611
+#: src/Buffer.cpp:3454 src/insets/ExternalSupport.cpp:400
+#: src/insets/InsetGraphics.cpp:705 src/insets/InsetInclude.cpp:621
msgid "Problematic filename for DVI"
msgstr "对 DVI 而言有问题的文件名"
-#: src/Buffer.cpp:3454 src/insets/ExternalSupport.cpp:401
-#: src/insets/InsetGraphics.cpp:706 src/insets/InsetInclude.cpp:612
+#: src/Buffer.cpp:3455 src/insets/ExternalSupport.cpp:401
+#: src/insets/InsetGraphics.cpp:706 src/insets/InsetInclude.cpp:622
msgid ""
"The following filename can cause troubles when running the exported file "
"through LaTeX and opening the resulting DVI: "
msgstr "以下文件名可能导致导出 LaTeX 并打开 DVI 文件时错误: "
-#: src/Buffer.cpp:3493 src/insets/InsetBibtex.cpp:353
+#: src/Buffer.cpp:3494 src/insets/InsetBibtex.cpp:353
msgid "Export Warning!"
msgstr "导出警告!"
-#: src/Buffer.cpp:3494
+#: src/Buffer.cpp:3495
msgid ""
"There are spaces in the paths to your BibTeX databases.\n"
"BibTeX will be unable to find them."
"您的 BibTeX 数据库文件名中有空格.\n"
"BibTeX 将不能找到此文件."
-#: src/Buffer.cpp:4165
+#: src/Buffer.cpp:4166
#, c-format
msgid "Preview source code for paragraph %1$d"
msgstr "预览段落 %1$d 的源代码"
-#: src/Buffer.cpp:4170
+#: src/Buffer.cpp:4171
#, c-format
msgid "Preview source code from paragraph %1$s to %2$s"
msgstr "预览段落 %1$s 至 %2$s 段落之源代码"
-#: src/Buffer.cpp:4226
+#: src/Buffer.cpp:4227
msgid "Preview source code"
msgstr "预览源文件"
-#: src/Buffer.cpp:4228
+#: src/Buffer.cpp:4229
msgid "Preview preamble"
msgstr "预览导言区"
-#: src/Buffer.cpp:4230
+#: src/Buffer.cpp:4231
msgid "Preview body"
msgstr "预览正文"
-#: src/Buffer.cpp:4246
+#: src/Buffer.cpp:4247
msgid "Plain text does not have a preamble."
msgstr "纯文本没有导言区。"
-#: src/Buffer.cpp:4390
+#: src/Buffer.cpp:4391
msgid "Autosaving current document..."
msgstr "自动保存当前文档..."
-#: src/Buffer.cpp:4515
+#: src/Buffer.cpp:4518
#, c-format
msgid "No information for exporting the format %1$s."
msgstr "无导出格式 %1$s 的信息."
-#: src/Buffer.cpp:4519
+#: src/Buffer.cpp:4522
#, fuzzy, c-format
msgid "Hint: use non-TeX fonts or set input encoding to '%1$s'"
msgstr "不同的“使用非 TeX 字体”设置"
-#: src/Buffer.cpp:4521
+#: src/Buffer.cpp:4524
msgid "Couldn't export file"
msgstr "无法导出文件"
-#: src/Buffer.cpp:4589 src/frontends/qt/GuiView.cpp:3040
+#: src/Buffer.cpp:4592 src/frontends/qt/GuiView.cpp:3044
msgid "File name error"
msgstr "文件名出错"
-#: src/Buffer.cpp:4590
+#: src/Buffer.cpp:4593
#, c-format
msgid ""
"The directory path to the document\n"
"save the file to a directory whose name does not contain spaces."
msgstr ""
-#: src/Buffer.cpp:4679 src/Buffer.cpp:4709 src/frontends/qt/GuiView.cpp:921
+#: src/Buffer.cpp:4682 src/Buffer.cpp:4712 src/frontends/qt/GuiView.cpp:922
msgid "Document export cancelled."
msgstr "文档导出已取消。"
-#: src/Buffer.cpp:4712
+#: src/Buffer.cpp:4715
#, c-format
msgid "Document exported as %1$s to file `%2$s'"
msgstr "文档 %1$s 导出为 `%2$s'"
-#: src/Buffer.cpp:4719
+#: src/Buffer.cpp:4722
#, c-format
msgid "Document exported as %1$s"
msgstr "文档导出为 %1$s"
-#: src/Buffer.cpp:4788
+#: src/Buffer.cpp:4791
#, c-format
msgid ""
"An emergency save of the document %1$s exists.\n"
"\n"
"使用此紧急版本吧?"
-#: src/Buffer.cpp:4791
+#: src/Buffer.cpp:4794
msgid "Load emergency save?"
msgstr "读入紧急保存的版本吗?"
-#: src/Buffer.cpp:4792
+#: src/Buffer.cpp:4795
msgid "&Recover"
msgstr "恢复(&R)"
-#: src/Buffer.cpp:4792
+#: src/Buffer.cpp:4795
msgid "&Load Original"
msgstr "读取原版本(&L)"
-#: src/Buffer.cpp:4792
+#: src/Buffer.cpp:4795
#, fuzzy
msgid "&Only show difference"
msgstr "差异"
-#: src/Buffer.cpp:4803
+#: src/Buffer.cpp:4806
#, c-format
msgid ""
"An emergency file is successfully loaded, but the original file %1$s is "
"已载入紧急备份文件。但原始文件“%1$s”是只读的。请保证将该文件另存为不同的文"
"件。"
-#: src/Buffer.cpp:4810
+#: src/Buffer.cpp:4813
msgid "Document was successfully recovered."
msgstr "文档已被成功修复。"
-#: src/Buffer.cpp:4812
+#: src/Buffer.cpp:4815
msgid "Document was NOT successfully recovered."
msgstr "文档 未 被成功修复。"
-#: src/Buffer.cpp:4813
+#: src/Buffer.cpp:4816
#, c-format
msgid ""
"Remove emergency file now?\n"
"现在删除紧急保存的文件吗?\n"
"(%1$s)"
-#: src/Buffer.cpp:4817 src/Buffer.cpp:4829
+#: src/Buffer.cpp:4820 src/Buffer.cpp:4832
msgid "Delete emergency file?"
msgstr "删除紧急保存的文件吗?"
-#: src/Buffer.cpp:4818 src/Buffer.cpp:4831
+#: src/Buffer.cpp:4821 src/Buffer.cpp:4834
msgid "&Keep"
msgstr "保留(&K)"
-#: src/Buffer.cpp:4822
+#: src/Buffer.cpp:4825
msgid "Emergency file deleted"
msgstr "紧急保存的文件已删除"
-#: src/Buffer.cpp:4823
+#: src/Buffer.cpp:4826
msgid "Do not forget to save your file now!"
msgstr "别忘了现在保存你的文件!"
-#: src/Buffer.cpp:4830
+#: src/Buffer.cpp:4833
msgid "Remove emergency file now?"
msgstr "现在删除紧急保存的文件吗?"
-#: src/Buffer.cpp:4853
+#: src/Buffer.cpp:4856
#, fuzzy
msgid "Can't rename emergency file!"
msgstr "删除紧急保存的文件吗?"
-#: src/Buffer.cpp:4854
+#: src/Buffer.cpp:4857
msgid ""
"LyX was unable to rename the emergency file. You should do so manually. "
"Otherwise, you will be asked about it again the next time you try to load "
"this file, and may over-write your own work."
msgstr ""
+"LyX未能重命名应急文件。您应手动进行重命名。否则,您下次尝试加载此文件时将再次被询问,"
+"并可能会覆盖您自己的工作。"
-#: src/Buffer.cpp:4859
+#: src/Buffer.cpp:4862
#, fuzzy
msgid "Emergency File Renamed"
msgstr "紧急保存的文件已删除"
-#: src/Buffer.cpp:4860
+#: src/Buffer.cpp:4863
#, fuzzy, c-format
msgid ""
"Emergency file renamed as:\n"
" %1$s"
msgstr "紧急保存的文件已删除"
-#: src/Buffer.cpp:4899
+#: src/Buffer.cpp:4902
#, c-format
msgid ""
"The backup of the document %1$s is newer.\n"
"\n"
"读取备份版本?"
-#: src/Buffer.cpp:4901
+#: src/Buffer.cpp:4904
msgid "Load backup?"
msgstr "读取备份版本?"
-#: src/Buffer.cpp:4902
+#: src/Buffer.cpp:4905
msgid "&Load backup"
msgstr "读取备份(&L)"
-#: src/Buffer.cpp:4902
+#: src/Buffer.cpp:4905
msgid "Load &original"
msgstr "读取原版本(&O)"
-#: src/Buffer.cpp:4912
+#: src/Buffer.cpp:4915
#, c-format
msgid ""
"A backup file is successfully loaded, but the original file %1$s is marked "
msgstr ""
"已载入备份文件。但原始文件“%1$s”是只读的。请保证将该文件另存为不同的文件。"
-#: src/Buffer.cpp:5298
+#: src/Buffer.cpp:5301
msgid "Senseless!!! "
msgstr "无意义!!! "
-#: src/Buffer.cpp:5566
+#: src/Buffer.cpp:5576
#, c-format
msgid "Document %1$s reloaded."
msgstr "文档 %1$s 已重新载入。"
-#: src/Buffer.cpp:5569
+#: src/Buffer.cpp:5579
#, c-format
msgid "Could not reload document %1$s."
msgstr "无法重新载入文档 %1$s。"
-#: src/Buffer.cpp:5730
+#: src/Buffer.cpp:5740
msgid "File deleted from disk"
msgstr ""
-#: src/Buffer.cpp:5731
+#: src/Buffer.cpp:5741
#, c-format
msgid ""
"The file\n"
msgstr "灰色嵌入文本"
#: src/BufferParams.cpp:1726 src/BufferParams.cpp:1880
-#: src/BufferParams.cpp:2355 src/Encoding.cpp:264 src/Paragraph.cpp:3173
+#: src/BufferParams.cpp:2355 src/Encoding.cpp:264 src/Paragraph.cpp:3174
#: src/frontends/qt/LaTeXHighlighter.cpp:176
#: src/insets/InsetCommandParams.cpp:508 src/insets/InsetCommandParams.cpp:516
#: src/insets/InsetGraphics.cpp:904 src/insets/InsetGraphics.cpp:912
msgstr "LyX 警告: "
#: src/BufferParams.cpp:1727 src/BufferParams.cpp:1881
-#: src/BufferParams.cpp:2356 src/Encoding.cpp:265 src/Paragraph.cpp:3174
+#: src/BufferParams.cpp:2356 src/Encoding.cpp:265 src/Paragraph.cpp:3175
#: src/insets/InsetCommandParams.cpp:509 src/insets/InsetCommandParams.cpp:517
#: src/insets/InsetGraphics.cpp:905 src/insets/InsetGraphics.cpp:913
#: src/insets/InsetListings.cpp:299 src/insets/InsetListings.cpp:307
msgstr "此段文档已被删除。"
#: src/BufferView.cpp:1212 src/BufferView.cpp:2396
-#: src/frontends/qt/GuiView.cpp:4498 src/frontends/qt/GuiView.cpp:4595
+#: src/frontends/qt/GuiView.cpp:4502 src/frontends/qt/GuiView.cpp:4599
msgid "Absolute filename expected."
msgstr "需要绝对路径。"
msgid "Overwrite &all"
msgstr "覆盖所有文件(&A)"
-#: src/Exporter.cpp:51 src/frontends/qt/GuiView.cpp:822
+#: src/Exporter.cpp:51 src/frontends/qt/GuiView.cpp:823
msgid "&Cancel export"
msgstr "取消导出(&C)"
msgid "Cannot view file"
msgstr "无法预览文件"
-#: src/Format.cpp:633 src/frontends/qt/GuiView.cpp:4195
+#: src/Format.cpp:633 src/frontends/qt/GuiView.cpp:4199
#, c-format
msgid "File does not exist: %1$s"
msgstr "文件不存在: %1$s"
msgid "(no log message)"
msgstr "(无日志消息)"
-#: src/LyXVC.cpp:252 src/frontends/qt/GuiView.cpp:4058
+#: src/LyXVC.cpp:252 src/frontends/qt/GuiView.cpp:4062
msgid "LyX VC: Log Message"
msgstr "LyX VC: 记录消息"
msgid "Revert to stored version of document?"
msgstr "恢复到已保存的版本吗?"
-#: src/LyXVC.cpp:310 src/frontends/qt/GuiView.cpp:4644
+#: src/LyXVC.cpp:310 src/frontends/qt/GuiView.cpp:4648
msgid "&Revert"
msgstr "还原(&R)"
msgid "Error reading cite engine %1$s\n"
msgstr "读取引用引擎 %1$s 错误\n"
-#: src/TocBackend.cpp:69 src/insets/InsetInclude.cpp:1373
+#: src/TocBackend.cpp:69 src/insets/InsetInclude.cpp:1385
msgid "MISSING: "
msgstr ""
#: src/VCBackend.cpp:934 src/VCBackend.cpp:993 src/VCBackend.cpp:1052
#: src/VCBackend.cpp:1060 src/VCBackend.cpp:1348 src/VCBackend.cpp:1450
#: src/VCBackend.cpp:1456 src/VCBackend.cpp:1479 src/VCBackend.cpp:1964
-#: src/frontends/qt/GuiView.cpp:3974 src/frontends/qt/GuiView.cpp:4017
+#: src/frontends/qt/GuiView.cpp:3978 src/frontends/qt/GuiView.cpp:4021
msgid "Revision control error."
msgstr "版本控制出错。"
"\n"
"您希望放弃修改并载入磁盘上的版本吗?"
-#: src/buffer_funcs.cpp:55 src/frontends/qt/GuiView.cpp:4635
+#: src/buffer_funcs.cpp:55 src/frontends/qt/GuiView.cpp:4639
msgid "Reload saved document?"
msgstr "载入磁盘上文档?"
msgid "Advanced Find and Replace"
msgstr "高级查找替换"
-#: src/frontends/qt/FindAndReplace.cpp:708
+#: src/frontends/qt/FindAndReplace.cpp:711
msgid "Find previous occurrence (Shift+Enter, forwards: Enter)"
msgstr ""
-#: src/frontends/qt/FindAndReplace.cpp:709
+#: src/frontends/qt/FindAndReplace.cpp:712
#, fuzzy
msgid "< Rep&lace"
msgstr "替换(&R)"
-#: src/frontends/qt/FindAndReplace.cpp:710
+#: src/frontends/qt/FindAndReplace.cpp:713
#, fuzzy
msgid "Replace and find previous occurrence (Shift+Enter, forwards: Enter)"
msgstr "替换并查找下一项[回车]"
msgid "Bad debug value `%1$s'."
msgstr ""
-#: src/frontends/qt/GuiApplication.cpp:1479 src/frontends/qt/GuiView.cpp:2368
+#: src/frontends/qt/GuiApplication.cpp:1479 src/frontends/qt/GuiView.cpp:2372
msgid "Command not allowed without a buffer open"
msgstr "此命令在没有任何缓存打开下不能执行"
#: src/frontends/qt/GuiDocument.cpp:3077 src/frontends/qt/GuiExternal.cpp:691
#: src/frontends/qt/GuiGraphics.cpp:841 src/frontends/qt/GuiInclude.cpp:382
#: src/frontends/qt/GuiLyXFiles.cpp:365 src/frontends/qt/GuiLyXFiles.cpp:371
-#: src/frontends/qt/GuiView.cpp:2789 src/frontends/qt/GuiView.cpp:2848
-#: src/frontends/qt/GuiView.cpp:3006 src/frontends/qt/GuiView.cpp:3140
-#: src/frontends/qt/GuiView.cpp:3260 src/frontends/qt/GuiView.cpp:3380
+#: src/frontends/qt/GuiView.cpp:2793 src/frontends/qt/GuiView.cpp:2852
+#: src/frontends/qt/GuiView.cpp:3010 src/frontends/qt/GuiView.cpp:3144
+#: src/frontends/qt/GuiView.cpp:3264 src/frontends/qt/GuiView.cpp:3384
#, fuzzy
msgid "D&ocuments"
msgstr "文档"
msgid "Choose a filename to save the pasted graphic as"
msgstr "选择图形另存为文件名"
-#: src/frontends/qt/GuiClipboard.cpp:220 src/frontends/qt/GuiView.cpp:2866
-#: src/frontends/qt/GuiView.cpp:3025 src/frontends/qt/GuiView.cpp:3041
-#: src/frontends/qt/GuiView.cpp:3053 src/frontends/qt/GuiView.cpp:3070
-#: src/frontends/qt/GuiView.cpp:3155 src/frontends/qt/GuiView.cpp:4607
+#: src/frontends/qt/GuiClipboard.cpp:220 src/frontends/qt/GuiView.cpp:2870
+#: src/frontends/qt/GuiView.cpp:3029 src/frontends/qt/GuiView.cpp:3045
+#: src/frontends/qt/GuiView.cpp:3057 src/frontends/qt/GuiView.cpp:3074
+#: src/frontends/qt/GuiView.cpp:3159 src/frontends/qt/GuiView.cpp:4611
msgid "Canceled."
msgstr "已取消。"
msgstr "选择文档"
#: src/frontends/qt/GuiCompare.cpp:160 src/frontends/qt/GuiLyXFiles.cpp:364
-#: src/frontends/qt/GuiView.cpp:2793 src/frontends/qt/GuiView.cpp:2852
-#: src/frontends/qt/GuiView.cpp:3144 src/frontends/qt/GuiView.cpp:3270
+#: src/frontends/qt/GuiView.cpp:2797 src/frontends/qt/GuiView.cpp:2856
+#: src/frontends/qt/GuiView.cpp:3148 src/frontends/qt/GuiView.cpp:3274
msgid "LyX Documents (*.lyx)"
msgstr "LyX 文档 (*.lyx)"
"Enter a LaTeX package name such as 'hyperref' (extension is optional). The "
"output will be 'Yes' (package available) or 'No' (package unavailable)."
msgstr ""
+"输入一个LaTeX包名,如“hyperref”(扩展名可选)。"
+"输出将为“Yes”(包可用)或“No”(包不可用)。"
#: src/frontends/qt/GuiInfo.cpp:194
msgid ""
"Enter a LaTeX class name such as 'article' (extension is optional). The "
"output will be 'Yes' (class available) or 'No' (class unavailable)."
msgstr ""
-
+"输入一个LaTeX类名,如“article”(扩展名可选)。"
+"输出将为“Yes”(类可用)或“No”(类不可用)。"
#: src/frontends/qt/GuiInfo.cpp:196
msgid ""
"Enter a function name such as 'math-insert \\alpha'. Please refer to Help > "
"localized string (using the current localization); trailing colons and "
"accelerator markup are stripped."
msgstr ""
+"输入LyX用户界面中的一个可本地化英文字符串,包括加速器标记(“&”或“|”)和尾部冒号。"
+"输出为使用当前本地化的本地化字符串;尾部冒号和加速器标记会被去除。"
#: src/frontends/qt/GuiInfo.cpp:204
msgid ""
"available entries. The output is the current setting of this preference."
msgstr ""
-#: src/frontends/qt/GuiInfo.cpp:256 src/insets/InsetInclude.cpp:426
+#: src/frontends/qt/GuiInfo.cpp:256 src/insets/InsetInclude.cpp:436
msgid "Unknown"
msgstr "未知"
msgid ""
"All available languages of the selected file are displayed here.\n"
"The selected language version will be opened."
-msgstr ""
+msgstr "此处显示所选文件的所有可用语言。\n所选语言版本将被打开。"
#: src/frontends/qt/GuiLyXFiles.cpp:331
msgid "No alternative language versions available for the selected file."
-msgstr ""
+msgstr "所选文件无可用的其他语言版本。"
#: src/frontends/qt/GuiLyXFiles.cpp:333
msgid ""
"If alternative languages are available for a given file,\n"
"they can be chosen here if a file is selected."
-msgstr ""
+msgstr "如果有给定文件的其他语言版本可用,\n在选定文件时可在此处选择。"
#: src/frontends/qt/GuiLyXFiles.cpp:363
#, fuzzy
msgid "Select example file"
msgstr "选择模板文件"
-#: src/frontends/qt/GuiLyXFiles.cpp:366 src/frontends/qt/GuiView.cpp:2849
-#: src/frontends/qt/GuiView.cpp:3007 src/frontends/qt/GuiView.cpp:3141
+#: src/frontends/qt/GuiLyXFiles.cpp:366 src/frontends/qt/GuiView.cpp:2853
+#: src/frontends/qt/GuiView.cpp:3011 src/frontends/qt/GuiView.cpp:3145
#, fuzzy
msgid "&Examples"
msgstr "例"
-#: src/frontends/qt/GuiLyXFiles.cpp:370 src/frontends/qt/GuiView.cpp:2788
+#: src/frontends/qt/GuiLyXFiles.cpp:370 src/frontends/qt/GuiView.cpp:2792
msgid "Select template file"
msgstr "选择模板文件"
-#: src/frontends/qt/GuiLyXFiles.cpp:372 src/frontends/qt/GuiView.cpp:2790
-#: src/frontends/qt/GuiView.cpp:3261
+#: src/frontends/qt/GuiLyXFiles.cpp:372 src/frontends/qt/GuiView.cpp:2794
+#: src/frontends/qt/GuiView.cpp:3265
#, fuzzy
msgid "&Templates"
msgstr "模板(&T)"
"\n"
"通常您不必手动设置此项,因为已设为所有项中标签宽度之最大者。"
-#: src/frontends/qt/GuiParagraph.cpp:175 src/frontends/qt/GuiView.cpp:3539
+#: src/frontends/qt/GuiParagraph.cpp:175 src/frontends/qt/GuiView.cpp:3543
msgid "&Close"
msgstr "关闭(&C)"
#: src/frontends/qt/GuiPrefs.cpp:2545
msgid ""
"Resetting the user interface style to 'Default' requires a restart of LyX."
-msgstr ""
+msgstr "将用户界面风格重置为“默认”需重启LyX。"
#: src/frontends/qt/GuiPrefs.cpp:2600
msgid "Document Handling"
"Note that these files are hidden by default by some file managers. A "
"dedicated backup directory can be set in the 'Paths' section."
msgstr ""
+"如果勾选,会在当前工作目录创建文档备份。备份文件具有相同的文件名但后缀为“.lyx~”。"
+"请注意,某些文件管理器默认情况下会隐藏这些文件。您可以在“路径”部分设置专用备份目录。"
#: src/frontends/qt/GuiPrefs.cpp:2697
#, c-format
msgid "Click here to change search options"
msgstr "点击修改颜色"
-#: src/frontends/qt/GuiSearch.cpp:572
+#: src/frontends/qt/GuiSearch.cpp:591
#, fuzzy
msgid "Search and Replace"
msgstr "查找并替换"
msgid "unknown version"
msgstr "未知的版本"
-#: src/frontends/qt/GuiView.cpp:635
+#: src/frontends/qt/GuiView.cpp:636
msgid "Click here to stop export/output process"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:675
+#: src/frontends/qt/GuiView.cpp:676
msgid "Workarea zoom level. Drag, use Ctrl-+/- or Shift-Mousewheel to adjust."
msgstr ""
-#: src/frontends/qt/GuiView.cpp:728 src/frontends/qt/GuiView.cpp:839
-#: src/frontends/qt/GuiView.cpp:1026 src/frontends/qt/Menus.cpp:1843
+#: src/frontends/qt/GuiView.cpp:729 src/frontends/qt/GuiView.cpp:840
+#: src/frontends/qt/GuiView.cpp:1027 src/frontends/qt/Menus.cpp:1843
#: src/frontends/qt/Menus.cpp:1847 src/frontends/qt/Menus.cpp:1851
#: src/frontends/qt/Menus.cpp:1855 src/frontends/qt/Menus.cpp:1859
#: src/frontends/qt/Menus.cpp:1863
msgid "[[ZOOM]]%1$d%"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:744
+#: src/frontends/qt/GuiView.cpp:745
msgid ""
"WARNING: LaTeX is allowed to execute external commands for this document. "
"Right click to change."
msgstr "警告: LaTeX 目前允许执行文档中的外部命令。要修改此选项,请单击右键。"
-#: src/frontends/qt/GuiView.cpp:818
+#: src/frontends/qt/GuiView.cpp:819
#, fuzzy
msgid "Cancel Export?"
msgstr "取消导出(&C)"
-#: src/frontends/qt/GuiView.cpp:819
+#: src/frontends/qt/GuiView.cpp:820
msgid "Do you want to cancel the background export process?"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:822
+#: src/frontends/qt/GuiView.cpp:823
#, fuzzy
msgid "Co&ntinue"
msgstr "继续(&C)"
-#: src/frontends/qt/GuiView.cpp:918
+#: src/frontends/qt/GuiView.cpp:919
#, c-format
msgid "Successful export to format: %1$s"
msgstr "已导出为: %1$s"
-#: src/frontends/qt/GuiView.cpp:927
+#: src/frontends/qt/GuiView.cpp:928
#, c-format
msgid "Error while exporting format: %1$s"
msgstr "导出格式 %1$s 出错"
-#: src/frontends/qt/GuiView.cpp:930
+#: src/frontends/qt/GuiView.cpp:931
#, c-format
msgid "Successful preview of format: %1$s"
msgstr "成功创建格式 %1$s 的预览"
-#: src/frontends/qt/GuiView.cpp:933
+#: src/frontends/qt/GuiView.cpp:934
#, c-format
msgid "Error while previewing format: %1$s"
msgstr "创建格式 %1$s 的预览时出错"
-#: src/frontends/qt/GuiView.cpp:936
+#: src/frontends/qt/GuiView.cpp:937
#, fuzzy, c-format
msgid "Conversion cancelled while previewing format: %1$s"
msgstr "创建格式 %1$s 的预览时出错"
-#: src/frontends/qt/GuiView.cpp:1297
+#: src/frontends/qt/GuiView.cpp:1298
msgid "Exit LyX"
msgstr "退出 LyX"
-#: src/frontends/qt/GuiView.cpp:1298
+#: src/frontends/qt/GuiView.cpp:1299
msgid "LyX could not be closed because documents are being processed by LyX."
msgstr "LyX 正在处理文档,不能关闭。"
-#: src/frontends/qt/GuiView.cpp:1478
+#: src/frontends/qt/GuiView.cpp:1482
#, fuzzy, c-format
msgid "%1$d Word"
msgstr "%1$d 词"
-#: src/frontends/qt/GuiView.cpp:1480
+#: src/frontends/qt/GuiView.cpp:1484
#, fuzzy, c-format
msgid "%1$d Words"
msgstr "%1$d 词"
-#: src/frontends/qt/GuiView.cpp:1485
+#: src/frontends/qt/GuiView.cpp:1489
#, fuzzy, c-format
msgid "%1$d Character"
msgstr "字符集"
-#: src/frontends/qt/GuiView.cpp:1487
+#: src/frontends/qt/GuiView.cpp:1491
#, fuzzy, c-format
msgid "%1$d Characters"
msgstr "字符集"
-#: src/frontends/qt/GuiView.cpp:1492
+#: src/frontends/qt/GuiView.cpp:1496
#, fuzzy, c-format
msgid "%1$d Character (no Blanks)"
msgstr "%1$d 字符 (包含空格)"
-#: src/frontends/qt/GuiView.cpp:1494
+#: src/frontends/qt/GuiView.cpp:1498
#, fuzzy, c-format
msgid "%1$d Characters (no Blanks)"
msgstr "%1$d 字符 (包含空格)"
-#: src/frontends/qt/GuiView.cpp:1496
+#: src/frontends/qt/GuiView.cpp:1500
msgid ", [[stats separator]]"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:1515
+#: src/frontends/qt/GuiView.cpp:1519
#, c-format
msgid "%1$s (modified externally)"
msgstr "%1$s (已在外部更改)"
-#: src/frontends/qt/GuiView.cpp:1638
+#: src/frontends/qt/GuiView.cpp:1642
msgid "Welcome to LyX!"
msgstr "欢迎使用 LyX!"
-#: src/frontends/qt/GuiView.cpp:2224
+#: src/frontends/qt/GuiView.cpp:2228
msgid "Automatic save done."
msgstr "自动保存完毕。"
-#: src/frontends/qt/GuiView.cpp:2225
+#: src/frontends/qt/GuiView.cpp:2229
msgid "Automatic save failed!"
msgstr "自动保存失败!"
-#: src/frontends/qt/GuiView.cpp:2305
+#: src/frontends/qt/GuiView.cpp:2309
msgid "Command not allowed without any document open"
msgstr "此命令在没有任何打开文档下不能执行"
-#: src/frontends/qt/GuiView.cpp:2374
+#: src/frontends/qt/GuiView.cpp:2378
msgid "Invalid argument of master-buffer-forall"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:2505
+#: src/frontends/qt/GuiView.cpp:2509
msgid "Function toolbar-set requires two arguments!"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:2512
+#: src/frontends/qt/GuiView.cpp:2516
#, c-format
msgid "Invalid argument \"%1$s\" to function toolbar-set!"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:2528 src/frontends/qt/GuiView.cpp:2541
-#: src/frontends/qt/GuiView.cpp:2558
+#: src/frontends/qt/GuiView.cpp:2532 src/frontends/qt/GuiView.cpp:2545
+#: src/frontends/qt/GuiView.cpp:2562
#, c-format
msgid "Unknown toolbar \"%1$s\""
msgstr "未知工具条 \"%1$s\""
-#: src/frontends/qt/GuiView.cpp:2682
+#: src/frontends/qt/GuiView.cpp:2686
msgid "Zoom level cannot be less than %1$d%."
msgstr "缩放比例不能小于 %1$d%."
-#: src/frontends/qt/GuiView.cpp:2687
+#: src/frontends/qt/GuiView.cpp:2691
#, fuzzy
msgid "Zoom level cannot be more than %1$d%."
msgstr "缩放比例不能小于 %1$d%."
-#: src/frontends/qt/GuiView.cpp:2817
+#: src/frontends/qt/GuiView.cpp:2821
msgid "Document not loaded."
msgstr "文档未读入。"
-#: src/frontends/qt/GuiView.cpp:2847
+#: src/frontends/qt/GuiView.cpp:2851
#, fuzzy
msgid "Select documents to open"
msgstr "选择要打开的文档"
-#: src/frontends/qt/GuiView.cpp:2853
+#: src/frontends/qt/GuiView.cpp:2857
#, fuzzy
msgid "LyX Document Backups (*.lyx~)"
msgstr "LyX 文档 (*.lyx)"
-#: src/frontends/qt/GuiView.cpp:2854 src/frontends/qt/GuiView.cpp:4604
+#: src/frontends/qt/GuiView.cpp:2858 src/frontends/qt/GuiView.cpp:4608
#: src/frontends/qt/qt_helpers.cpp:677
#, fuzzy
msgid "All Files"
msgstr "所有文件 "
-#: src/frontends/qt/GuiView.cpp:2885
+#: src/frontends/qt/GuiView.cpp:2889
#, c-format
msgid ""
"The directory in the given path\n"
"%1$s\n"
"不存在。"
-#: src/frontends/qt/GuiView.cpp:2897
+#: src/frontends/qt/GuiView.cpp:2901
#, c-format
msgid ""
"File\n"
"does not exist. Create empty file?"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:2901
+#: src/frontends/qt/GuiView.cpp:2905
#, fuzzy
msgid "File does not exist"
msgstr "文件不存在: %1$s"
-#: src/frontends/qt/GuiView.cpp:2903
+#: src/frontends/qt/GuiView.cpp:2907
#, fuzzy
msgid "Create &File"
msgstr "文件损坏"
-#: src/frontends/qt/GuiView.cpp:2915
+#: src/frontends/qt/GuiView.cpp:2919
#, c-format
msgid "Opening document %1$s..."
msgstr "打开文档 %1$s ..."
-#: src/frontends/qt/GuiView.cpp:2920
+#: src/frontends/qt/GuiView.cpp:2924
#, c-format
msgid "Document %1$s opened."
msgstr "文档 %1$s 已打开。"
-#: src/frontends/qt/GuiView.cpp:2923
+#: src/frontends/qt/GuiView.cpp:2927
msgid "Version control detected."
msgstr "检测到版本控制。"
-#: src/frontends/qt/GuiView.cpp:2925
+#: src/frontends/qt/GuiView.cpp:2929
#, c-format
msgid "Could not open document %1$s"
msgstr "无法打开文档 %1$s"
-#: src/frontends/qt/GuiView.cpp:2954
+#: src/frontends/qt/GuiView.cpp:2958
msgid "Couldn't import file"
msgstr "无法导入文件"
-#: src/frontends/qt/GuiView.cpp:2955
+#: src/frontends/qt/GuiView.cpp:2959
#, c-format
msgid "No information for importing the format %1$s."
msgstr "无格式 %1$s 的导入信息."
-#: src/frontends/qt/GuiView.cpp:3002
+#: src/frontends/qt/GuiView.cpp:3006
#, c-format
msgid "Select %1$s file to import"
msgstr "选择导入文件 %1$s"
-#: src/frontends/qt/GuiView.cpp:3037
+#: src/frontends/qt/GuiView.cpp:3041
#, c-format
msgid ""
"The file name '%1$s' is invalid!\n"
"文件名“%1$s”无效。\n"
"取消导入。"
-#: src/frontends/qt/GuiView.cpp:3064 src/frontends/qt/GuiView.cpp:3329
-#: src/frontends/qt/GuiView.cpp:3434
+#: src/frontends/qt/GuiView.cpp:3068 src/frontends/qt/GuiView.cpp:3333
+#: src/frontends/qt/GuiView.cpp:3438
#, c-format
msgid ""
"The document %1$s already exists.\n"
"文件 %1$s 已经存在。\n"
"您要覆盖它吗?"
-#: src/frontends/qt/GuiView.cpp:3066 src/frontends/qt/GuiView.cpp:3333
-#: src/frontends/qt/GuiView.cpp:3438
+#: src/frontends/qt/GuiView.cpp:3070 src/frontends/qt/GuiView.cpp:3337
+#: src/frontends/qt/GuiView.cpp:3442
msgid "Overwrite document?"
msgstr "覆盖文件?"
-#: src/frontends/qt/GuiView.cpp:3075
+#: src/frontends/qt/GuiView.cpp:3079
#, c-format
msgid "Importing %1$s..."
msgstr "导入 %1$s..."
-#: src/frontends/qt/GuiView.cpp:3078
+#: src/frontends/qt/GuiView.cpp:3082
msgid "imported."
msgstr "导入的。"
-#: src/frontends/qt/GuiView.cpp:3080
+#: src/frontends/qt/GuiView.cpp:3084
msgid "file not imported!"
msgstr "文件没有导入!"
-#: src/frontends/qt/GuiView.cpp:3106
+#: src/frontends/qt/GuiView.cpp:3110
msgid "newfile"
msgstr "新建文件"
-#: src/frontends/qt/GuiView.cpp:3139
+#: src/frontends/qt/GuiView.cpp:3143
msgid "Select LyX document to insert"
msgstr "选择插入的 LyX 文档"
-#: src/frontends/qt/GuiView.cpp:3186
+#: src/frontends/qt/GuiView.cpp:3190
#, c-format
msgid ""
"It is suggested to save the template in a subdirectory\n"
"Do you want to create it?"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:3191
+#: src/frontends/qt/GuiView.cpp:3195
#, fuzzy
msgid "Create Language Directory?"
msgstr "创建目录 (&C)"
-#: src/frontends/qt/GuiView.cpp:3192 src/frontends/qt/GuiView.cpp:3223
+#: src/frontends/qt/GuiView.cpp:3196 src/frontends/qt/GuiView.cpp:3227
#, fuzzy
msgid "&Yes, Create"
msgstr "创建(&C)"
-#: src/frontends/qt/GuiView.cpp:3192 src/frontends/qt/GuiView.cpp:3223
+#: src/frontends/qt/GuiView.cpp:3196 src/frontends/qt/GuiView.cpp:3227
msgid "&No, Save Template in Parent Directory"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:3195 src/frontends/qt/GuiView.cpp:3226
+#: src/frontends/qt/GuiView.cpp:3199 src/frontends/qt/GuiView.cpp:3230
#, fuzzy
msgid "Subdirectory creation failed!"
msgstr "重配置系统失败"
-#: src/frontends/qt/GuiView.cpp:3196 src/frontends/qt/GuiView.cpp:3227
+#: src/frontends/qt/GuiView.cpp:3200 src/frontends/qt/GuiView.cpp:3231
#, fuzzy
msgid ""
"Could not create subdirectory.\n"
"%1$s\n"
"至临时目录."
-#: src/frontends/qt/GuiView.cpp:3217
+#: src/frontends/qt/GuiView.cpp:3221
#, c-format
msgid ""
"It is suggested to save the template in a subdirectory\n"
"Do you want to create it?"
msgstr ""
-#: src/frontends/qt/GuiView.cpp:3222
+#: src/frontends/qt/GuiView.cpp:3226
#, fuzzy
msgid "Create Category Directory?"
msgstr "创建目录 (&C)"
-#: src/frontends/qt/GuiView.cpp:3257
+#: src/frontends/qt/GuiView.cpp:3261
#, fuzzy
msgid "Choose a filename to save template as"
msgstr "选择另存为文件名"
-#: src/frontends/qt/GuiView.cpp:3258
+#: src/frontends/qt/GuiView.cpp:3262
msgid "Choose a filename to save document as"
msgstr "选择另存为文件名"
-#: src/frontends/qt/GuiView.cpp:3292
+#: src/frontends/qt/GuiView.cpp:3296
#, c-format
msgid ""
"The file\n"
"已经打开。若想覆盖请先关闭它。\n"
"您要另选一个文件名保存吗?"
-#: src/frontends/qt/GuiView.cpp:3296
+#: src/frontends/qt/GuiView.cpp:3300
msgid "Chosen File Already Open"
msgstr "选定的文档已打开"
-#: src/frontends/qt/GuiView.cpp:3297 src/frontends/qt/GuiView.cpp:3319
-#: src/frontends/qt/GuiView.cpp:3335 src/frontends/qt/GuiView.cpp:3439
-#: src/frontends/qt/GuiView.cpp:3484
+#: src/frontends/qt/GuiView.cpp:3301 src/frontends/qt/GuiView.cpp:3323
+#: src/frontends/qt/GuiView.cpp:3339 src/frontends/qt/GuiView.cpp:3443
+#: src/frontends/qt/GuiView.cpp:3488
msgid "&Rename"
msgstr "重命名(&R)"
-#: src/frontends/qt/GuiView.cpp:3312
+#: src/frontends/qt/GuiView.cpp:3316
#, c-format
msgid ""
"The document %1$s is already registered.\n"
"文件 %1$s 已经注册。\n"
"您要选择一个新文件名吗?"
-#: src/frontends/qt/GuiView.cpp:3317
+#: src/frontends/qt/GuiView.cpp:3321
msgid "Rename document?"
msgstr "要对文档重新命名吗?"
-#: src/frontends/qt/GuiView.cpp:3317
+#: src/frontends/qt/GuiView.cpp:3321
msgid "Copy document?"
msgstr "要复制文档吗?"
-#: src/frontends/qt/GuiView.cpp:3319
+#: src/frontends/qt/GuiView.cpp:3323
msgid "&Copy"
msgstr "复制(&C)"
-#: src/frontends/qt/GuiView.cpp:3379
+#: src/frontends/qt/GuiView.cpp:3383
msgid "Choose a filename to export the document as"
msgstr "选择输出文档的文件名"
-#: src/frontends/qt/GuiView.cpp:3383
+#: src/frontends/qt/GuiView.cpp:3387
msgid "Guess from extension (*.*)"
msgstr "从扩展名推测 (*.*)"
-#: src/frontends/qt/GuiView.cpp:3480
+#: src/frontends/qt/GuiView.cpp:3484
#, c-format
msgid ""
"The document %1$s could not be saved.\n"
"\n"
"您是否想尝试以其他文件名保存?"
-#: src/frontends/qt/GuiView.cpp:3483
+#: src/frontends/qt/GuiView.cpp:3487
msgid "Rename and save?"
msgstr "改名并保存?"
-#: src/frontends/qt/GuiView.cpp:3484
+#: src/frontends/qt/GuiView.cpp:3488
msgid "&Retry"
msgstr "重试(&R)"
-#: src/frontends/qt/GuiView.cpp:3529
+#: src/frontends/qt/GuiView.cpp:3533
#, c-format
msgid ""
"Last view on document %1$s is being closed.\n"
"若不想再被问到此问题,请从此处修改选项:\n"
"工具->首选项->外观->用户界面\n"
-#: src/frontends/qt/GuiView.cpp:3538
+#: src/frontends/qt/GuiView.cpp:3542
msgid "Close or hide document?"
msgstr "要关闭或隐藏文档吗?"
-#: src/frontends/qt/GuiView.cpp:3539
+#: src/frontends/qt/GuiView.cpp:3543
msgid "&Hide"
msgstr "隐藏(&H)"
-#: src/frontends/qt/GuiView.cpp:3636
+#: src/frontends/qt/GuiView.cpp:3640
msgid "Close document"
msgstr "关闭文档"
-#: src/frontends/qt/GuiView.cpp:3637
+#: src/frontends/qt/GuiView.cpp:3641
msgid "Document could not be closed because it is being processed by LyX."
msgstr "正在被 LyX 处理的文档不能关闭。"
-#: src/frontends/qt/GuiView.cpp:3769 src/frontends/qt/GuiView.cpp:3901
+#: src/frontends/qt/GuiView.cpp:3773 src/frontends/qt/GuiView.cpp:3905
#, c-format
msgid ""
"The document %1$s has not been saved yet.\n"
"\n"
"您希望保存文档吗?"
-#: src/frontends/qt/GuiView.cpp:3772 src/frontends/qt/GuiView.cpp:3904
+#: src/frontends/qt/GuiView.cpp:3776 src/frontends/qt/GuiView.cpp:3908
msgid "Save new document?"
msgstr "保存新文档?"
-#: src/frontends/qt/GuiView.cpp:3773 src/frontends/qt/GuiView.cpp:3787
-#: src/frontends/qt/GuiView.cpp:3906
+#: src/frontends/qt/GuiView.cpp:3777 src/frontends/qt/GuiView.cpp:3791
+#: src/frontends/qt/GuiView.cpp:3910
msgid "&Save"
msgstr "保存(&S)"
-#: src/frontends/qt/GuiView.cpp:3778
+#: src/frontends/qt/GuiView.cpp:3782
#, c-format
msgid ""
"The document %1$s has unsaved changes.\n"
"\n"
"您是希望保存还是取消这些修改?"
-#: src/frontends/qt/GuiView.cpp:3781
+#: src/frontends/qt/GuiView.cpp:3785
#, c-format
msgid ""
"The document %1$s has not been saved yet.\n"
"\n"
"您希望保存文档还是丢弃文档?"
-#: src/frontends/qt/GuiView.cpp:3785 src/frontends/qt/GuiView.cpp:3898
+#: src/frontends/qt/GuiView.cpp:3789 src/frontends/qt/GuiView.cpp:3902
msgid "Save changed document?"
msgstr "保存改变的文档?"
-#: src/frontends/qt/GuiView.cpp:3785
+#: src/frontends/qt/GuiView.cpp:3789
msgid "Save document?"
msgstr "要保存文档吗?"
-#: src/frontends/qt/GuiView.cpp:3787
+#: src/frontends/qt/GuiView.cpp:3791
msgid "&Discard"
msgstr "放弃(&D)"
-#: src/frontends/qt/GuiView.cpp:3895
+#: src/frontends/qt/GuiView.cpp:3899
#, c-format
msgid ""
"The document %1$s has unsaved changes.\n"
"\n"
"您希望保存文档吗?"
-#: src/frontends/qt/GuiView.cpp:3927
+#: src/frontends/qt/GuiView.cpp:3931
#, c-format
msgid ""
"Document \n"
"文件 %1$s 已被其它程序修改,您要重新加载它吗?\n"
"您的修改将会丢失。"
-#: src/frontends/qt/GuiView.cpp:3930
+#: src/frontends/qt/GuiView.cpp:3934
msgid "Reload externally changed document?"
msgstr "重新载入在外部更改的文档吗?"
-#: src/frontends/qt/GuiView.cpp:3975
+#: src/frontends/qt/GuiView.cpp:3979
msgid "Document could not be checked in."
msgstr "无法释放文档所有权(check in)。"
-#: src/frontends/qt/GuiView.cpp:4018
+#: src/frontends/qt/GuiView.cpp:4022
msgid "Error when setting the locking property."
msgstr "设定锁属性出错。"
-#: src/frontends/qt/GuiView.cpp:4067
+#: src/frontends/qt/GuiView.cpp:4071
msgid "Directory is not accessible."
msgstr "无法读取目录。"
-#: src/frontends/qt/GuiView.cpp:4144
+#: src/frontends/qt/GuiView.cpp:4148
#, c-format
msgid "Opening child document %1$s..."
msgstr "打开子文档 %1$s..."
-#: src/frontends/qt/GuiView.cpp:4202
+#: src/frontends/qt/GuiView.cpp:4206
#, c-format
msgid "No buffer for file: %1$s."
msgstr "无文件 %1$s 的缓冲区。"
-#: src/frontends/qt/GuiView.cpp:4212
+#: src/frontends/qt/GuiView.cpp:4216
msgid "Inverse Search Failed"
msgstr "反向查找失败"
-#: src/frontends/qt/GuiView.cpp:4213
+#: src/frontends/qt/GuiView.cpp:4217
msgid ""
"Invalid position requested by inverse search.\n"
"You may need to update the viewed document."
"反向查找不能从这个位置开始。\n"
"您可能要更新该文档。"
-#: src/frontends/qt/GuiView.cpp:4286
+#: src/frontends/qt/GuiView.cpp:4290
msgid "Export Error"
msgstr "导出错误"
-#: src/frontends/qt/GuiView.cpp:4287
+#: src/frontends/qt/GuiView.cpp:4291
msgid "Error cloning the Buffer."
msgstr "复制缓存出错。"
-#: src/frontends/qt/GuiView.cpp:4438 src/frontends/qt/GuiView.cpp:4458
+#: src/frontends/qt/GuiView.cpp:4442 src/frontends/qt/GuiView.cpp:4462
msgid "Exporting ..."
msgstr "导出中..."
-#: src/frontends/qt/GuiView.cpp:4467
+#: src/frontends/qt/GuiView.cpp:4471
msgid "Previewing ..."
msgstr "预览中..."
-#: src/frontends/qt/GuiView.cpp:4505
+#: src/frontends/qt/GuiView.cpp:4509
msgid "Document not loaded"
msgstr "文档未读入"
-#: src/frontends/qt/GuiView.cpp:4601
+#: src/frontends/qt/GuiView.cpp:4605
msgid "Select file to insert"
msgstr "选择插入文件"
-#: src/frontends/qt/GuiView.cpp:4632
+#: src/frontends/qt/GuiView.cpp:4636
#, c-format
msgid ""
"The current version will be lost. Are you sure you want to load the version "
"on disk of the document %1$s?"
msgstr "当前版本将丢失。您确定希望恢复文件 %1$s 到磁盘上保存的版本吗?"
-#: src/frontends/qt/GuiView.cpp:4639
+#: src/frontends/qt/GuiView.cpp:4643
#, c-format
msgid ""
"Any changes will be lost. Are you sure you want to revert to the saved "
"version of the document %1$s?"
msgstr "将舍弃所有更改。您确定希望恢复文件 %1$s 到磁盘上保存的版本吗?"
-#: src/frontends/qt/GuiView.cpp:4642
+#: src/frontends/qt/GuiView.cpp:4646
msgid "Revert to saved document?"
msgstr "回退到磁盘上文档?"
-#: src/frontends/qt/GuiView.cpp:4659
+#: src/frontends/qt/GuiView.cpp:4663
msgid "Buffer export reset."
msgstr ""
-#: src/frontends/qt/GuiView.cpp:4682
+#: src/frontends/qt/GuiView.cpp:4686
msgid "Saving all documents..."
msgstr "保存所有文档..."
-#: src/frontends/qt/GuiView.cpp:4692
+#: src/frontends/qt/GuiView.cpp:4696
msgid "All documents saved."
msgstr "所有文档均已保存。"
-#: src/frontends/qt/GuiView.cpp:4731
+#: src/frontends/qt/GuiView.cpp:4735
msgid "Developer mode is now enabled."
msgstr "开发者模式已启用。"
-#: src/frontends/qt/GuiView.cpp:4733
+#: src/frontends/qt/GuiView.cpp:4737
msgid "Developer mode is now disabled."
msgstr "开发者模式已禁用。"
-#: src/frontends/qt/GuiView.cpp:4765
+#: src/frontends/qt/GuiView.cpp:4769
msgid "Toolbars unlocked."
msgstr "工具栏已解锁。"
-#: src/frontends/qt/GuiView.cpp:4767
+#: src/frontends/qt/GuiView.cpp:4771
msgid "Toolbars locked."
msgstr "工具栏已锁定。"
-#: src/frontends/qt/GuiView.cpp:4779
+#: src/frontends/qt/GuiView.cpp:4783
#, c-format
msgid "Icon size set to %1$dx%2$d."
msgstr "图标大小已设置为 %1$d*%2$d."
-#: src/frontends/qt/GuiView.cpp:4868
+#: src/frontends/qt/GuiView.cpp:4872
#, c-format
msgid "%1$s unknown command!"
msgstr "%1$s 未知命令!"
-#: src/frontends/qt/GuiView.cpp:4969
+#: src/frontends/qt/GuiView.cpp:4973
msgid "Zoom level is now %1$d% (default value: %2$d%)"
msgstr "缩放比例已调整至 %1$d% (默认: %2$d%)"
-#: src/frontends/qt/GuiView.cpp:5032
+#: src/frontends/qt/GuiView.cpp:5036
msgid "Please, preview the document first."
msgstr "请先预览文档。"
-#: src/frontends/qt/GuiView.cpp:5050
+#: src/frontends/qt/GuiView.cpp:5054
msgid "Couldn't proceed."
msgstr "不能继续执行。"
-#: src/frontends/qt/GuiView.cpp:5433
+#: src/frontends/qt/GuiView.cpp:5437
msgid "Disable Shell Escape"
msgstr ""
msgid "footnote"
msgstr "脚注"
-#: src/insets/InsetGraphics.cpp:567 src/insets/InsetInclude.cpp:787
+#: src/insets/InsetGraphics.cpp:567 src/insets/InsetInclude.cpp:799
#, c-format
msgid ""
"Could not copy the file\n"
msgid "Hyperlink (%1$s) to %2$s"
msgstr "链接 (%1$s) 至 %2$s"
-#: src/insets/InsetInclude.cpp:402
+#: src/insets/InsetInclude.cpp:412
msgid "MISSING:"
msgstr ""
-#: src/insets/InsetInclude.cpp:420
+#: src/insets/InsetInclude.cpp:430
msgid "Include (excluded)"
msgstr ""
-#: src/insets/InsetInclude.cpp:529
+#: src/insets/InsetInclude.cpp:539
#, c-format
msgid ""
"The file\n"
"The document set will not work properly until this is fixed!"
msgstr ""
-#: src/insets/InsetInclude.cpp:531
+#: src/insets/InsetInclude.cpp:541
#, fuzzy
msgid "Recursive Include"
msgstr "迭代输入"
-#: src/insets/InsetInclude.cpp:545
+#: src/insets/InsetInclude.cpp:555
#, fuzzy
msgid "No file name specified"
msgstr "需要绝对路径。"
-#: src/insets/InsetInclude.cpp:546
+#: src/insets/InsetInclude.cpp:556
#, fuzzy
msgid ""
"An included file name is empty.\n"
"Ignoring Inclusion"
msgstr "试图包含文件 %1$s 本身! 忽略包含。"
-#: src/insets/InsetInclude.cpp:553
+#: src/insets/InsetInclude.cpp:563
#, fuzzy
msgid "Included file not found"
msgstr "未找到系统文件"
-#: src/insets/InsetInclude.cpp:554
+#: src/insets/InsetInclude.cpp:564
#, c-format
msgid ""
"The included file\n"
"has not been found. LyX will ignore the inclusion."
msgstr ""
-#: src/insets/InsetInclude.cpp:569
+#: src/insets/InsetInclude.cpp:579
#, c-format
msgid "[INCLUDED FILE %1$s DELETED!]"
msgstr ""
-#: src/insets/InsetInclude.cpp:801
+#: src/insets/InsetInclude.cpp:813
#, c-format
msgid ""
"Could not load included file\n"
"不能载入包含文件 %1$s。\n"
"请检查它是否存在。"
-#: src/insets/InsetInclude.cpp:805 src/insets/InsetInclude.cpp:912
-#: src/insets/InsetInclude.cpp:938
+#: src/insets/InsetInclude.cpp:817 src/insets/InsetInclude.cpp:924
+#: src/insets/InsetInclude.cpp:950
msgid "Error: "
msgstr "错误: "
-#: src/insets/InsetInclude.cpp:817
+#: src/insets/InsetInclude.cpp:829
#, c-format
msgid ""
"Included file `%1$s'\n"
"属于文档类”%2$s“\n"
"但父文件的文档类是”%3$s“。"
-#: src/insets/InsetInclude.cpp:823
+#: src/insets/InsetInclude.cpp:835
msgid "Different textclasses"
msgstr "不同文档类"
-#: src/insets/InsetInclude.cpp:829
+#: src/insets/InsetInclude.cpp:841
#, c-format
msgid ""
"Included file `%1$s'\n"
"将非 TeX 字体设为“%2$s”\n"
"而上级文件将非 TeX 字体设为“%3$s”。"
-#: src/insets/InsetInclude.cpp:835
+#: src/insets/InsetInclude.cpp:847
msgid "Different use-non-TeX-fonts settings"
msgstr "不同的“使用非 TeX 字体”设置"
-#: src/insets/InsetInclude.cpp:838
+#: src/insets/InsetInclude.cpp:850
#, fuzzy, c-format
msgid ""
"Included file `%1$s'\n"
"属于文档类”%2$s“\n"
"但父文件的文档类是”%3$s“。"
-#: src/insets/InsetInclude.cpp:846
+#: src/insets/InsetInclude.cpp:858
#, fuzzy
msgid "Different LaTeX input encodings"
msgstr "使用 LaTeX 字体编码(&X):"
-#: src/insets/InsetInclude.cpp:861
+#: src/insets/InsetInclude.cpp:873
#, c-format
msgid ""
"Included file `%1$s'\n"
"使用了“%2$s”\n"
"而该模块不在上级文件中。"
-#: src/insets/InsetInclude.cpp:865
+#: src/insets/InsetInclude.cpp:877
msgid "Module not found"
msgstr "找不到模块"
-#: src/insets/InsetInclude.cpp:904 src/insets/InsetInclude.cpp:931
+#: src/insets/InsetInclude.cpp:916 src/insets/InsetInclude.cpp:943
#, c-format
msgid ""
"Included file `%1$s' was not exported correctly.\n"
"包含的文件 `%1$s' 未能正确导出。\n"
" LaTeX 导出可能不完整。"
-#: src/insets/InsetInclude.cpp:968 src/insets/InsetInclude.cpp:1072
+#: src/insets/InsetInclude.cpp:980 src/insets/InsetInclude.cpp:1084
msgid "Unsupported Inclusion"
msgstr "不支持的包含操作"
-#: src/insets/InsetInclude.cpp:969
+#: src/insets/InsetInclude.cpp:981
#, c-format
msgid ""
"LyX does not know how to include non-LyX files when generating HTML output. "
"LyX 不知道输出为 HTML 时如何包含非 LyX 文件。受影响的文件是:\n"
"%1$s"
-#: src/insets/InsetInclude.cpp:1073
+#: src/insets/InsetInclude.cpp:1085
#, fuzzy, c-format
msgid ""
"LyX does not know how to process included non-LyX files when generating "
"ignore this."
msgstr ""
-#: src/insets/InsetTabular.cpp:5719
+#: src/insets/InsetTabular.cpp:5741
msgid "Column movement not supported with multi-columns."
msgstr ""
-#: src/insets/InsetTabular.cpp:5737
+#: src/insets/InsetTabular.cpp:5759
msgid "Row movement not supported with multi-rows."
msgstr ""
-#: src/insets/InsetTabular.cpp:6258
+#: src/insets/InsetTabular.cpp:6280
msgid "Selection size should match clipboard content."
msgstr "选区大小需要与剪贴板中的内容一致。"
msgid ""
"The search string was not found within the selection.\n"
"Continue search outside?"
-msgstr ""
+msgstr "搜索字符串在选定范围内未找到。\n是否继续在范围外搜索?"
#: src/lyxfind.cpp:357 src/lyxfind.cpp:709
msgid ""
"无法打开指定文件\n"
"%1$s."
-#: src/output_latex.cpp:1676
+#: src/output_latex.cpp:1681
msgid "Error in latexParagraphs"
msgstr "latexParagraphs 出错"
-#: src/output_latex.cpp:1677
+#: src/output_latex.cpp:1682
#, c-format
msgid ""
"You are using at least one layout (%1$s) intended for the title, after using "