-### This file is part of
-### =====================================================
-###
-### LyX, the High Level Word Processor
-###
-### Copyright 1995-1997 Matthias Ettrich & the LyX Team
-###
-### =====================================================
-
-# The file lyxrc.example is a template to write your own lyxrc file.
+# -*- text -*-
+
+# file lyxrc.example
+# This file is part of LyX, the document processor.
+# Licence details can be found in the file COPYING.
+
+# author Lars Gullik Bjønnes
+# author Jean-Marc Lasgouttes
+# author José Matos
+# author Asger Alstrup Nielsen
+# author Ed Scott
+# author Lior Silberman
+# author Dekel Tsur
+
+# Full author contact details are available in file CREDITS.
+
+# The file lyxrc.example is a template to write your own lyxrc file.
# If you copy/rename it to lyxrc in the current directory, it will
# give global options for all LyX users. It is also possible to copy
# this file to $HOME/.lyx/lyxrc so that the configuration applies to a
# cua.bind for Windows-, Mac- and Motif-like bindings
# emacs.bind for Emacs-like bindings.
#
-# The \bind_file command looks in the LyX bind directory for a file
+# The \bind_file command looks in the LyX bind directory for a file
# of the given name, but a full path can also be given. If you have
# a bind file in your ~/.lyx/bind/ directory, it will be preferred
# over a system wide bind file. Default is `cua'.
# However, if you're not at all happy with the default bindings,
# the most logical thing to do would be to use one of the system
# wide bind files as a template and place your own version in
-# ~/.lyx/bind/mine_is_best.bind and change the above \bind_file
+# ~/.lyx/bind/mine_is_best.bind and change the above \bind_file
# to this instead:
#\bind_file mine_is_best
+# By default, LyX takes over the handling of the dead keys (or accent
+# keys) that may be defined for your keyboard. While this allows you
+# to enter characters that would not be normally available, some
+# people dislike the different behaviour. You can use raw dead keys by
+# just uncommenting the next line
+#\override_x_deadkeys false
+
# Tip: Use "lyx -dbg 4" to survey how LyX interprets your keybindings.
# MISC SECTION ###########################################################
#
+# Set this to false if you don't want the startup banner.
+# Default is true.
+#\show_banner true
+
# Set to false if you don't want the current selection to be replaced
# automatically by what you type. Default is true.
#\auto_region_delete false
# 0 means no auto-save, default is 300 for five minutes.
#\autosave 600
-# LyX asks for a second confirmation to exit if you exit with changed
-# documents that you don't want to save. You can turn this confirmation off
+# LyX asks for a second confirmation to exit if you exit with changed
+# documents that you don't want to save. You can turn this confirmation off
# (LyX will still ask to save changed documents) with the following line.
# We recommend to keep the confirmation, though.
#\exit_confirmation false
-# LyX continously displays names of last command executed, along with a list
+# This sets the behaviour if you want to be asked for a filename when
+# creating a new document or wait until you save it and be asked then.
+# The default for now is ask on save.
+# \new_ask_filename false
+
+# LyX continously displays names of last command executed, along with a list
# of defined short-cuts for it in the minibuffer.
# It requires some horsepower to function, so you can turn it off, if LyX
# seems slow to you, by uncommenting this line:
#\display_shortcuts false
-# Define which program to use to view dvi files here.
-# You can include any options you need by "quoting" the entire command.
-# You don't need to specify the paper-size and orientation, which is done
-# automatically by LyX (hence, your viewer has to interpret the -paper
-# option like xdvi does)
-# The default is "xdvi".
-# Example: the next line would use xdvi and display with shrink 2:
-#\view_dvi_command "xdvi -s 2"
-# It can get more involved. Expert users might prefer something like:
-#\view_dvi_command "xdvi -s 2 -expert -geometry 1014x720+0+0 -keep -margins 1.5"
+# \view_dvi_paper_option allows to specify a paper option to the dvi
+# viewer. By default LyX specifies the paper size of the document to
+# the dvi viewer via the command line option -paper size, where size
+# is one of "us","letter","a3","a4" and so on. The command
+# \view_dvi_paper_option allows the user to overwrite the name of the
+# command line flag, i.e. replace -paper with something else. If
+# specified and left empty, i.e. \view_dvi_paper_option "", LyX does
+# not append the -paper option to the dvi command at all. This case is
+# especially useful when viewing your documents on Windows with yap,
+# because yap does not allow a command line option for the paper size.
+#\view_dvi_paper_option ""
# LyX assumes that the default papersize should be usletter. If this is not
# true for your site, use the next line to specify usletter, legal,
# executive, a3, a4, a5, or b5 as the default papersize.
#\default_papersize "a4"
-# Define which program to use to view postscript files here.
-# You can include any options you need by "quoting" the entire command
-# The default is auto-detected, but you might want to override it.
-# It is possible to get nice anti-aliased text (slower, but as nice as
-# xdvi) by using something like
-#\view_ps_command "ghostview -swap -sDEVICE=x11alpha"
-
-# Define which program to use to full screen view included postscript
-# pictures. You can not include any options. The default is auto-detected.
-#\view_pspic_command ghostview
-
-# Define which program to use to use as postscript interpreter for included
-# images.
-# You can not include any options. The default is "gs" if it can be found.
-# If you have a slow computer, you should consider turning off the WYSIWYG
-# display of includes images, by using this command:
-#\ps_command ""
-
# Define which program to use to run "chktex".
# You should include options that turn different warnings on and off.
# Default is "chktex -n1 -n3 -n6 -n9 -n22 -n25 -n30 -n38"
# Example: use this to ignore warnings about using "\ldots" instead of "..."
#\chktex_command "chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -n38"
-# Define which program to use to translate latex to HTML.
-# You should include options. The default is autodetected: the programs
-# checked are tth, latex2html and hevea, and the default command lines
-# used are:
-#\html_command "tth -t < '$$FName' > '$$OutName'"
-#\html_command "latex2html -no_subdir -split 0 -show_section_numbers '$$FName'"
-#\html_command "hevea -s '$$FName'"
-# The variable name $$FName is replaced with the name of the .tex
-# file, and $$OutName is replaced with the name of the html file.
-# Example: use this to let math be italic with tth.
-#\html_command "tth -t -i < '$$FName' > '$$OutName'"
-
-# If you want to pass extra flags to the LinuxDoc sgml scripts, insert them
-# here.
-# Example: the next line activates iso-latin1 support:
-#\sgml_extra_options -l
-
# Keyboard Mapping. Use this to set the correct mapping file for your
# keyboard, that is if you need one. You'll need one if you for instance
# want to type German documents on an American keyboard. In that case,
# the lib/kbd directory if you want to write support for your language.
# If you do, please submit it to lyx-devel@lists.lyx.org.
-# The Pause button is defined to be a three-way switch between primary
+# The Pause button is defined to be a three-way switch between primary
# keyboard, secondary keyboard, and no keyboard mapping with the
# following command. It is useful if you want to write in a language
# not directly supported by your keyboard and you have defined a
# '.in' and '.out'. Only for advanced users.
# \serverpipe "/home/chb/.lyxpipe"
-# Which command to use to invoke the reLyX script to convert
-# LaTeX files to LyX files. This setting is automatically
-# disabled if you do not have the appropriate Perl version
-# installed. In that case, the File->Import LaTeX command
-# will be disabled. If the reLyX command does work for you,
-# you can override that here by uncommenting this line:
-#\relyx_command "reLyX"
+# Default format string for the date-insert command
+#
+# This accepts the normal strftime formats; see man strftime for full
+# details of the format.
+#
+#\date_insert_format "%A, %e. %B %Y"
+
+
+# Maximum number of words in the initialization string for a new label.
+# If it is set to 0, then the init. string will only contain the prefix
+# (e.g. "sec:"). If it is set to -1, the init. string will be empty.
+# This feature is disabled in 1.1.6.
#
-# If it doesn't work, you can disable the command by uncommenting
-# this line:
-#\relyx_command "none"
+#\label_init_length 0
#
# SCREEN & FONTS SECTION #################################################
#
-# DPI (dots per inch) of your monitor is auto-detected by LyX. If that goes
+# DPI (dots per inch) of your monitor is auto-detected by LyX. If that goes
# wrong, you can override the setting here:
#\screen_dpi 100
# The zoom percentage for screen fonts.
-# A setting of 100% will make the fonts roughly the same size as on paper.
+# A setting of 100% will make the fonts roughly the same size as on paper.
# However, since a screen is wider than a piece of paper, the default setting
# is 150%.
#\screen_zoom 100
-# LyX offers a faster method for drawing selected text if you uncomment the
-# following line. The trick is to invert the color-information. This will
-# switch between white and black and give almost random results for
-# other colors, so a white background is necessary. Any other settings of
-# the background color will be ignored for this reason. This setting
-# is useful on monochrome screens and on slow systems. Fast selection
-# can cause cosmetic problems with a few broken X servers.
-#\fast_selection true
-
-# If you don't like the default background or selection color, you can
-# set your own here:
-#\background_color white
-#\background_color lightyellow
-#
-# For reference, the defaults are:
-#\background_color linen
-#\selection_color lightblue
+# The wheel movement factor (for mice with wheels or five button mice)
+# Default is 100, about a page down. A value of 10 give me about a line and
+# a half
+#\wheel_jump 10
# LyX normally doesn't update the cursor position if you move the scrollbar.
# If you scroll the cursor off the screen and then start typing LyX will
-# move you back to where the cursor was. If you'd prefer to always have the
-# cursor on screen, bounded by the topmost and bottommost visible lines
+# move you back to where the cursor was. If you'd prefer to always have the
+# cursor on screen, bounded by the topmost and bottommost visible lines
# -- much like XEmacs for example -- then uncomment the next line.
#\cursor_follows_scrollbar true
# the same as what LaTeX calls latin1.
#\screen_font_encoding iso8859-2
-# The font for popups. It is set to
+# The norm for the popup fonts. The default is an empty string, which
+# causes to use the screen fonts norm (defined by \screen_font_encoding).
+#\popup_font_encoding iso8859-2
+
+
+# The normal font for popups. It is set to
# <font_popup>-*-*-*-?-*-*-*-*-<font_encoding>.
# The default is:
-#\screen_font_popup "-*-helvetica-medium-r"
+#\popup_font_name "-*-helvetica-medium-r"
-# The font for menus (and groups titles in popups). It is set to
+# The bold font for popups. It is set to
# <font_menu>-*-*-*-?-*-*-*-*-<font_encoding>.
# The default is:
-#\screen_font_menu "-*-helvetica-bold-r"
+#\popup_bold_font "-*-helvetica-bold-r"
# The font sizes used for calculating the scaling of the screen fonts.
# You should only have to change these if the fonts on your screen look bad,
# in which case you can fine tune the font selection size by size. LyX selects
# font size according to this table, the monitor DPI setting and the current
-# zoom setting.
+# zoom setting.
# The format is:
#\screen_font_sizes tiny smallest smaller small normal large larger largest huge huger
#
# This is the default in LyX (exactly what LaTeX does):
#\screen_font_sizes 5.0 7.0 8.0 9.0 10.0 12.0 14.4 17.28 20.74 24.88
+# To change the colors for footnotes:
+#\set_color footnote green
+# for mathed you may also want to change the coloring of lines and brackets:
+#\set_color math yellow
+#\set_color mathlines yellow
+
+#
+# UI SECTION ########################################################
#
-# TOOLBAR SECTION ########################################################
-#
-
-# Setup your favorite Toolbar here:
-# Only three commands are allowed inside the begin_toolbar and end_toolbar
-# directives:
-# \add <action> [<parameter>] adds an icon to the toolbar performing
-# "<action> <parameter>"
-# Examples:
-# \add font-size small
-# \add set-emph
-#
-# \layouts adds the layouts combo-box to the toolbar
-#
-# \separator adds some spacing to the toolbar
-#
-# These actions have icons (please give us more :-):
-# buffer-open, buffer-close, buffer-print, buffer-write, font-emph,
-# font-noun, font-free, footnote-insert, depth-next, copy, cut, paste,
-# tex-mode, math-mode, marginpar-insert, figure-insert, table-insert,
-# melt, lyx-quit, buffer-export ascii|latex, font-bold, font-sans,
-# buffer-typeset, buffer-view, buffer-view-ps, symbol_insert [parameter]
-#
-# All other lyx commands will get a "unknown" icon.
-#
-# This is the default toolbar:
-#\begin_toolbar
-#\layouts
-#\add buffer-open
-#\add buffer-write
-#\add buffer-print
-#\separator
-#\add cut
-#\add copy
-#\add paste
-#\separator
-#\add font-emph
-#\add font-noun
-#\add font-free
-#\separator
-#\add footnote-insert
-#\add marginpar-insert
-#\add depth-next
-#\separator
-#\add tex-mode
-#\add math-mode
-#\separator
-#\add figure-insert
-#\add table-insert
-#\end_toolbar
+
+# Choose your UI (user interface) definition here. The .ui files are in the
+# directory "lib/ui" and contains the definition of the menu and the toolbar.
+#\ui_file "default"
#
# PRINTER SECTION ########################################################
# your print program.
#\print_command dvips
-# Extra options to pass to printing program after everything
+# Extra options to pass to printing program after everything
# else, but before the filename of the DVI file to be printed.
#\print_extra_options ""
-# When set, this printer option automatically prints to a file
+# When set, this printer option automatically prints to a file
# and then calls a separate print spooling program on that file
# with the given name and arguments.
# This is set by default to 'lp' or 'lpr', depending on what your
-# system uses.
+# system uses.
# Set this to "" if you have set up dvips so that it sends
# output to the right printer (remember to also use \print_adapt_output).
#\print_spool_command ""
# If you specify a printer name in the print dialog,
# the following argument is prepended along with the printer name
# after the spool command. The default is autodetected, along with
-# \print_spool_command determination.
+# \print_spool_command determination.
#\print_spool_printerprefix ""
# Other print related options
# program. Look at the man page for your favorite print program to learn
# which options to use.
# Normally you don't need to change this unless you use something other
-# than dvips.
+# than dvips.
#\print_evenpage_flag -B
#\print_oddpage_flag -A
-#\print_reverse_flag -r
+#\print_reverse_flag -r
#\print_landscape_flag "-t landscape"
#\print_pagerange_flag -pp
#\print_copies_flag -c
#\print_to_printer -P
# Option to pass to the print program to print to a file.
-#\print_to_file -o
+#\print_to_file -o
# Extension of printer program output file. Usually .ps
#\print_file_extension .ps
#\print_extra_options -q
#\print_evenpage_flag "-D2 -r"
#\print_oddpage_flag -D1
-#\print_reverse_flag -r
+#\print_reverse_flag -r
#\print_landscape_flag -l
#\print_pagerange_flag -p
#\print_to_file -e
#\print_collcopies_flag -c
#\print_adapt_output false
-
#
# EXPORT SECTION ########################################################
#
-
-# With this you can send a LyX-Document to a User-defined program. You
-# can specify by adding the tag $$FName where the filename should be
-# put on the defined command. if no $$FName is specified the file is
-# sent in standard input (stdin). There is no default command
-# specified. Example:
-#\custom_export_command "kghostview $$FName"
-
-# This is the default for the type of contents to be sent to the export
-# command: possible values are lyx, dvi, tex, ps and ascii.
-#\custom_export_format ps
+# The \converter command defines a converter between two formats.
+# LyX uses the defined converters for generating output in various formats,
+# or for importing.
+# The converter command has 4 arguments: The source format, the target format,
+# the command, and additional flags.
+# For example, the following defines a DVI->Postscript converter:
+#\converter dvi ps "dvips -o $$o $$i" ""
+# The variable name $$i is replaced with the name of the source file,
+# and $$o is replaced with the name of the target file.
+# The flags argument is a list of comma separated flags.
+# Known flags are
+# - * : copy the previously defined flags
+# - latex : The converter is latex or its derivatives (pdflatex).
+# - originaldir : The converter must be invoked in the directory of the lyx
+# file and not in the temporary directory. This is needed for tex->html
+# converters in order to be able to read the eps files.
+# - needaux : The converted uses the .aux file, so we need to call latex
+# before running the converter.
+# - resultdir=dir : The converter put all the files in dir.
+# Using "resultdir" is same as "resultdir=$$b".
+# Note: When exporting, the whole directory will be moved from the temporary
+# directory to the target directory.
+# - resultfile=file : Name of main file in the result directory, for example
+# "index.html" or "$$b.html"
+# If "resultfile" is omitted, the name of this file is assumed to be
+# "index.format"
+# - parselog=filtername : filtername is a name of a filter command that takes
+# the converter error log (from stderr), and converts it to a fake latex .log
+# file.
+# For example:
+#\converter latex html "latex2html -split 0 $$i"
+# "originaldir,needaux,resultdir"
+#
+# For literate programming, use something like
+#\converter literate latex "noweave -delay -index $$i >$$o"
+# "parselog=listerrors g"
+#\converter literate program "build-script $$i"
+# "originaldir,parselog=listerrors g"
+
+# The format command is used to define file formats. It has 4 arguments:
+# the format name, the extension, and "pretty name" and menu shortcut.
+# For example
+#\Format latex tex LaTeX L
+
+# The \viewer command is used to define viewers for new formats,
+# or to change the already defined viewers.
+# For example, to use xdvi as the viewer to dvi files use
+#\viewer dvi "xdvi"
+# It can get more involved. Expert users might prefer something like:
+#\viewer dvi "xdvi -s 2 -expert -geometry 1014x720+0+0 -keep -margins 1.5"
#
# TEX SECTION ###########################################################
#
-# LyX tries to auto-detect which command to use to invoke LaTeX(2e).
-# If the auto-detection for some reasons fail, you can override it
-# here:
-#\latex_command latex2e
-
# The font encoding used for the LaTeX2e fontenc package.
# T1 is highly recommended for non-English languages. LyX uses T1 as a
# default if you have the ec fonts installed on your system.
# Choose "default" if T1 doesn't work for you for some reason:
#\font_encoding default
-
#
# FILE SECTION ##########################################################
#
# Flag telling whether the lastfiles should be checked for existence.
# Files that does not exist are left out of the lastfiles entries.
# Default is true. If you use slow or removable media, such as networks
-# or floppy disks, you can speed up the starting time of LyX by disabling
+# or floppy disks, you can speed up the starting time of LyX by disabling
# this feature.
#\check_lastfiles false
#\use_tempdir false
# This is the maximum line length of an exported ASCII file (LaTeX,
-# SGML or plain text). Default is 75.
+# SGML or plain text). Default is 75.
#\ascii_linelen 80
+# Set to false if you don't want LyX to create backup files.
+# Default is true.
+#\make_backup true
-#
-# FAX SECTION #############################################################
-#
-
-# In the following, the <$$something> strings are substituted by
-# reasonable values by LyX. The 's are important as there may be spaces in
-# the string. The default is auto-detected.
-# This one is what is used with HylaFax:
-#\fax_command "sendfax -n -h '$$Host' -c '$$Comment' -x '$$Enterprise' -d '$$Name'@'$$Phone' '$$FName'"
-# Use this for the efax-command:
-#\fax_command "faxsend '$$Phone' '$$FName'"
-
-# This is the name of your phone book. It's per default situated in ~/.lyx/,
-# but you can override that with an absolute path.
-#\phone_book phonebook
-
-# This is how to call an external FAX-program instead of the built-in.
-# You may also insert $$FName to reference the PostScript file.
-#\fax_program "myfaxprg '$$FName'"
-#\fax_program tkhylafax
+# The path for storing backup files. If it is the empty string, LyX will
+# store the backup file in the same directory of the original file.
+# Default is "".
+#\backupdir_path "~/Desktop/Trash/"
#
# ASCII EXPORT SECTION ###################################################
#
# The following entry can be used to define an external program to
-# render tables in the ASCII output. If you specify "none", a simple
+# render tables in the ASCII output. If you specify "none", a simple
# internal routine is used. The default is auto-detected.
# The following line will use groff and output using latin-1 encoding
# (here $$FName is the input file and the output goes to stdout):
# installed and configured, you might want to uncomment the line below.
#\spell_command aspell
-# Consider run-together words, such as "notthe" for "not the", as legal
-# words? Default is no.
+# Consider run-together words, such as "notthe" for "not the", as legal
+# words? Default is false.
#\accept_compound true
-# Specify an alternate language. The default is to use the language of
+# Specify an alternate language. The default is to use the language of
# document. Uncomment both to enable.
#\use_alt_language true
#\alternate_language dansk
#\escape_chars "æøåÆØÅ"
# Specify an alternate personal dictionary file. If the file name does not
-# begin with "/", $HOME is prefixed. The default is to search for a personal
-# dictionary in both the current directory and $HOME, creating one in $HOME
-# if none is found. The preferred name is constructed by appending ".ispell_"
-# to the base name of the hash file. For example, if you use the English
-# dictionary, your personal dictionary would be named ".ispell_english".
+# begin with "/", $HOME is prefixed. The default is to search for a personal
+# dictionary in both the current directory and $HOME, creating one in $HOME
+# if none is found. The preferred name is constructed by appending ".ispell_"
+# to the base name of the hash file. For example, if you use the English
+# dictionary, your personal dictionary would be named ".ispell_english".
#\use_personal_dictionary true
#\personal_dictionary .ispell_dansk
-# Specify whether to pass the -T input encoding option to ispell (only if the
+# Specify whether to pass the -T input encoding option to ispell (only if the
# language is different than "default".) Enable this if you can't spellcheck
# words with international letters in them. There have been reports that this
# does not work with all dictionaries, so this is disabled by default.
#\use_input_encoding true
+
+
+#
+# LANGUAGE SUPPORT SECTION ####################################################
+#
+
+# Set to true to enable support of right-to-left languages (e.g. Hebrew,
+# Arabic). Default is false.
+#\rtl true
+
+# The latex command for loading the language package.
+# Default is \usepackage{babel}.
+#\language_package "\usepackage{omega}"
+
+# The latex command for changing the from the language of the document
+# to another language. $$lang is substituted by the name of the second
+# language. Default is \selectlanguage{$$lang}.
+#\language_command_begin "\begin{otherlanguage}{$$lang}"
+
+# The latex command for changing back the language to the language of
+# the document. Default is \selectlanguage{$$lang}.
+#\language_command_end "\end{otherlanguage}"
+
+# Set to false if a language switching command is needed at the beginning of
+# the document. Default is true.
+#\language_auto_begin false
+
+# Set to false if a language switching command is needed at the end of
+# the document. Default is true.
+#\language_auto_end false
+
+# Set mark_foreign_language to "false" to disable the highlighting of words
+# with a foreign language to the language of the documet.
+# Default is "true"
+#\mark_foreign_language false
+
+# It is possible to bind keys for changing the language inside a document.
+# For example, the following command will cause F12 to switch between French
+# and English in a French document, and in a document of other language it will
+# switch between that language and French.
+#\bind "F12" "language french"
+
+#
+# HEBREW SUPPORT SECTION ####################################################
+#
+
+# To enable the Hebrew support, uncommnet the following lines:
+#\rtl true
+#\kbmap true
+#\kbmap_primary null
+#\kbmap_secondary hebrew
+#\converter tex dvi elatex ""
+#\converter tex pdf pdfelatex ""
+#\font_encoding default
+
+# You also need to bind a key for switching between Hebrew and English.
+# For example,
+#\bind "F12" "language hebrew"
+
+# You might want ot disable the foreign language marking:
+#\mark_foreign_language false
+
+# Finally, you need to select iso8859-8 font encoding, and select screen fonts
+# (below are the default fonts. You need to replace them by Hebrew fonts)
+#\screen_font_encoding iso8859-8
+#\screen_font_roman "-*-times"
+#\screen_font_sans "-*-helvetica"
+#\screen_font_typewriter "-*-courier"
+#\screen_font_popup "-*-helvetica-medium-r"
+#\screen_font_menu "-*-helvetica-bold-r"
+
+#
+# ARABIC SUPPORT SECTION ####################################################
+#
+
+# To enable the Arabic support, uncommnet the following lines:
+#\rtl true
+#\kbmap true
+#\kbmap_primary null
+#\kbmap_secondary arabic
+
+# You also need to bind a key for switching between Arabic and English.
+# For example,
+#\bind "F12" "language arabic"
+
+# If you use arabtex, uncomment the following lines
+#\language_auto_begin false
+#\language_auto_end false
+#\language_command_begin "\begin{arabtext}"
+#\language_command_end "\end{arabtext}"
+#\language_package "\usepackage{arabtex,iso88596}\setcode{iso8859-6}"
+
+# Finally, you need to select iso8859-6.8x font encoding,
+# and select screen fonts.
+# iso8859-6.8x fonts can be found at
+# http://www.langbox.com/AraMosaic/mozilla/fontXFE/
+#\screen_font_encoding iso8859-6.8x
+#\screen_font_encoding_menu iso8859-1
+#\screen_font_roman "-*-naskhi"
projects / lyx.git / blobdiff