def convert_dashligatures(document):
- " Remove a zero-length space (U+200B) after en- and em-dashes. "
-
- i = find_token(document.header, "\\use_microtype", 0)
- if i != -1:
- if document.initial_format > 474 and document.initial_format < 509:
- # This was created by LyX 2.2
- document.header[i+1:i+1] = ["\\use_dash_ligatures false"]
- else:
- # This was created by LyX 2.1 or earlier
- document.header[i+1:i+1] = ["\\use_dash_ligatures true"]
-
- i = 0
- while i < len(document.body):
- words = document.body[i].split()
- # Skip some document parts where dashes are not converted
- if len(words) > 1 and words[0] == "\\begin_inset" and \
- words[1] in ["CommandInset", "ERT", "External", "Formula", \
- "FormulaMacro", "Graphics", "IPA", "listings"]:
- j = find_end_of_inset(document.body, i)
- if j == -1:
- document.warning("Malformed LyX document: Can't find end of " \
- + words[1] + " inset at line " + str(i))
- i += 1
- else:
- i = j
- continue
- if len(words) > 0 and words[0] in ["\\leftindent", \
- "\\paragraph_spacing", "\\align", "\\labelwidthstring"]:
- i += 1
- continue
-
- start = 0
- while True:
- j = document.body[i].find(u"\u2013", start) # en-dash
- k = document.body[i].find(u"\u2014", start) # em-dash
- if j == -1 and k == -1:
- break
- if j == -1 or (k != -1 and k < j):
- j = k
- after = document.body[i][j+1:]
- if after.startswith(u"\u200B"):
- document.body[i] = document.body[i][:j+1] + after[1:]
- else:
- if len(after) == 0 and document.body[i+1].startswith(u"\u200B"):
- document.body[i+1] = document.body[i+1][1:]
- break
- start = j+1
- i += 1
-
+ "Set 'use_dash_ligatures' according to content."
+ use_dash_ligatures = None
+ # eventually remove preamble code from 2.3->2.2 conversion:
+ for i, line in enumerate(document.preamble):
+ if i > 1 and line == r'\renewcommand{\textemdash}{---}':
+ if (document.preamble[i-1] == r'\renewcommand{\textendash}{--}'
+ and document.preamble[i-2] == '% Added by lyx2lyx'):
+ del document.preamble[i-2:i+1]
+ use_dash_ligatures = True
+ if use_dash_ligatures is None:
+ # Look for dashes:
+ # (Documents by LyX 2.1 or older have "\twohyphens\n" or "\threehyphens\n"
+ # as interim representation for dash ligatures in 2.2.)
+ has_literal_dashes = False
+ has_ligature_dashes = False
+ j = 0
+ for i, line in enumerate(document.body):
+ # Skip some document parts where dashes are not converted
+ if (i < j) or line.startswith("\\labelwidthstring"):
+ continue
+ words = line.split()
+ if len(words) > 1 and words[0] == "\\begin_inset" and \
+ words[1] in ["CommandInset", "ERT", "External", "Formula",
+ "FormulaMacro", "Graphics", "IPA", "listings"]:
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: "
+ "Can't find end of %s inset at line %d" % (words[1],i))
+ continue
+ # literal dash followed by a word or no-break space:
+ if re.search(u"[\u2013\u2014]([\w\u00A0]|$)", line,
+ flags=re.UNICODE):
+ has_literal_dashes = True
+ # ligature dash followed by word or no-break space on next line:
+ if re.search(u"(\\twohyphens|\\threehyphens)", line,
+ flags=re.UNICODE) and re.match(u"[\w\u00A0]",
+ document.body[i+1], flags=re.UNICODE):
+ has_ligature_dashes = True
+ if has_literal_dashes and has_ligature_dashes:
+ # TODO: insert a warning note in the document?
+ document.warning('This document contained both literal and '
+ '"ligature" dashes.\n Line breaks may have changed. '
+ 'See UserGuide chapter 3.9.1 for details.')
+ elif has_literal_dashes:
+ use_dash_ligatures = False
+ elif has_ligature_dashes:
+ use_dash_ligatures = True
+ # insert the setting if there is a preferred value
+ if use_dash_ligatures is not None:
+ i = find_token(document.header, "\\use_microtype", 0)
+ if i != -1:
+ document.header.insert(i+1, "\\use_dash_ligatures %s"
+ % str(use_dash_ligatures).lower())
def revert_dashligatures(document):
- " Remove font ligature settings for en- and em-dashes. "
+ """Remove font ligature settings for en- and em-dashes.
+ Revert conversion of \twodashes or \threedashes to literal dashes."""
i = find_token(document.header, "\\use_dash_ligatures", 0)
if i == -1:
return
i = find_token(document.header, "\\use_non_tex_fonts", 0)
if i != -1:
use_non_tex_fonts = get_bool_value(document.header, "\\use_non_tex_fonts", i)
- if not use_dash_ligatures or use_non_tex_fonts:
+ if not use_dash_ligatures or document.backend != "latex":
return
- # Add a zero-length space (U+200B) after en- and em-dashes
- i = 0
- while i < len(document.body):
- words = document.body[i].split()
+ j = 0
+ new_body = []
+ for i, line in enumerate(document.body):
# Skip some document parts where dashes are not converted
+ if (i < j) or line.startswith("\\labelwidthstring"):
+ new_body.append(line)
+ continue
+ words = line.split()
if len(words) > 1 and words[0] == "\\begin_inset" and \
- words[1] in ["CommandInset", "ERT", "External", "Formula", \
+ words[1] in ["CommandInset", "ERT", "External", "Formula",
"FormulaMacro", "Graphics", "IPA", "listings"]:
j = find_end_of_inset(document.body, i)
if j == -1:
- document.warning("Malformed LyX document: Can't find end of " \
+ document.warning("Malformed LyX document: Can't find end of "
+ words[1] + " inset at line " + str(i))
- i += 1
- else:
- i = j
- continue
- if len(words) > 0 and words[0] in ["\\leftindent", \
- "\\paragraph_spacing", "\\align", "\\labelwidthstring"]:
- i += 1
+ new_body.append(line)
continue
-
- start = 0
- while True:
- j = document.body[i].find(u"\u2013", start) # en-dash
- k = document.body[i].find(u"\u2014", start) # em-dash
- if j == -1 and k == -1:
- break
- if j == -1 or (k != -1 and k < j):
- j = k
- after = document.body[i][j+1:]
- document.body[i] = document.body[i][:j+1] + u"\u200B" + after
- start = j+1
- i += 1
+ line = line.replace(u'\u2013', '\\twohyphens\n')
+ line = line.replace(u'\u2014', '\\threehyphens\n')
+ lines = line.split('\n')
+ new_body.extend(line.split('\n'))
+ document.body = new_body
+ # redefine the dash LICRs to use ligature dashes:
+ add_to_preamble(document, [r'\renewcommand{\textendash}{--}',
+ r'\renewcommand{\textemdash}{---}'])
def revert_noto(document):
else:
l = find_token(document.header, "\\use_default_options", 0)
document.header.insert(l, "\\options reqno")
- # add the math_number_before tag
+ # add the math_number_before tag
regexp = re.compile(r'(\\math_numbering_side default)')
i = find_re(document.header, regexp, 0)
if i != -1: