for rep in unicode_reps:
string = string.replace(rep[1], rep[0].replace('\\\\', '\\'))
string = string.replace('\\', "\\backslash\n")
- string = "\\begin_inset ERT\nstatus collapsed\n\\begin_layout Standard\n" \
+ string = "\\begin_inset ERT\nstatus collapsed\n\\begin_layout Plain Layout\n" \
+ string + "\n\\end_layout\n\\end_inset"
return string
return content
+def latex_length(string):
+ 'Convert lengths to their LaTeX representation.'
+ i = 0
+ percent = False
+ # the string has the form
+ # ValueUnit+ValueUnit-ValueUnit or
+ # ValueUnit+-ValueUnit
+ # the + and - (glue lengths) are optional
+ # the + always precedes the -
+
+ # Convert relative lengths to LaTeX units
+ units = {"text%":"\\textwidth", "col%":"\\columnwidth",
+ "page%":"\\pagewidth", "line%":"\\linewidth",
+ "theight%":"\\textheight", "pheight%":"\\pageheight"}
+ for unit in units.keys():
+ i = string.find(unit)
+ if i != -1:
+ percent = True
+ minus = string.rfind("-", 1, i)
+ plus = string.rfind("+", 0, i)
+ latex_unit = units[unit]
+ if plus == -1 and minus == -1:
+ value = string[:i]
+ value = str(float(value)/100)
+ end = string[i + len(unit):]
+ string = value + latex_unit + end
+ if plus > minus:
+ value = string[plus+1:i]
+ value = str(float(value)/100)
+ begin = string[:plus+1]
+ end = string[i+len(unit):]
+ string = begin + value + latex_unit + end
+ if plus < minus:
+ value = string[minus+1:i]
+ value = str(float(value)/100)
+ begin = string[:minus+1]
+ string = begin + value + latex_unit
+
+ # replace + and -, but only if the - is not the first character
+ string = string[0] + string[1:].replace("+", " plus ").replace("-", " minus ")
+ # handle the case where "+-1mm" was used, because LaTeX only understands
+ # "plus 1mm minus 1mm"
+ if string.find("plus minus"):
+ lastvaluepos = string.rfind(" ")
+ lastvalue = string[lastvaluepos:]
+ string = string.replace(" ", lastvalue + " ")
+ if percent == False:
+ return "False," + string
+ else:
+ return "True," + string
+
+
####################################################################
document.warning("Malformed LyX document: Could not find end of tabular.")
i = j
continue
+ # don't set a box for longtables, only delete tabularvalignment
+ # the alignment is 2 lines below \\begin_inset Tabular
+ p = document.body[i+2].find("islongtable")
+ if p > -1:
+ q = document.body[i+2].find("tabularvalignment")
+ if q > -1:
+ document.body[i+2] = document.body[i+2][:q-1]
+ document.body[i+2] = document.body[i+2] + '>'
+ i = i + 1
- k = find_token(document.body, "<features tabularvalignment=", i)
- if k == -1:
- i = j
- continue
-
- # which valignment is specified?
- tabularvalignment_re = re.compile(r'<features tabularvalignment="(top|bottom)">')
- m = tabularvalignment_re.match(document.body[k])
- if not m:
- i = j
- continue
+ # when no longtable
+ if p == -1:
+ tabularvalignment = 'c'
+ # which valignment is specified?
+ m = document.body[i+2].find('tabularvalignment="top"')
+ if m > -1:
+ tabularvalignment = 't'
+ m = document.body[i+2].find('tabularvalignment="bottom"')
+ if m > -1:
+ tabularvalignment = 'b'
+ # delete tabularvalignment
+ q = document.body[i+2].find("tabularvalignment")
+ if q > -1:
+ document.body[i+2] = document.body[i+2][:q-1]
+ document.body[i+2] = document.body[i+2] + '>'
- tabularvalignment = m.group(1)
-
- subst = ['\\end_layout', '\\end_inset']
- document.body[j+1:j+1] = subst # just inserts those lines
- subst = ['\\begin_inset Box Frameless',
- 'position "' + tabularvalignment[0] +'"',
- 'hor_pos "c"',
- 'has_inner_box 1',
- 'inner_pos "c"',
- 'use_parbox 0',
- 'width "0col%"',
- 'special "none"',
- 'height "1in"',
- 'height_special "totalheight"',
- 'status open',
- '',
- '\\begin_layout Plain Layout']
- document.body[i:i] = subst # this just inserts the array at i
- i += len(subst) + 2 # adjust i to save a few cycles
+ # don't add a box when centered
+ if tabularvalignment == 'c':
+ i = j
+ continue
+ subst = ['\\end_layout', '\\end_inset']
+ document.body[j+1:j+1] = subst # just inserts those lines
+ subst = ['\\begin_inset Box Frameless',
+ 'position "' + tabularvalignment +'"',
+ 'hor_pos "c"',
+ 'has_inner_box 1',
+ 'inner_pos "c"',
+ 'use_parbox 0',
+ # we don't know the width, assume 50%
+ 'width "50col%"',
+ 'special "none"',
+ 'height "1in"',
+ 'height_special "totalheight"',
+ 'status open',
+ '',
+ '\\begin_layout Plain Layout']
+ document.body[i:i] = subst # this just inserts the array at i
+ i += len(subst) + 2 # adjust i to save a few cycles
def revert_phantom(document):
return
colorcode = get_value(document.header, '\\backgroundcolor', 0)
del document.header[i]
+ # don't clutter the preamble if backgroundcolor is not set
+ if colorcode == "#ffffff":
+ continue
# the color code is in the form #rrggbb where every character denotes a hex number
# convert the string to an int
red = string.atoi(colorcode[1:3],16)
i = i + 1
+def revert_printindexall(document):
+ " Reverts \\print[sub]index* CommandInset types "
+ i = find_token(document.header, '\\use_indices', 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Missing \\use_indices.")
+ return
+ indices = get_value(document.header, "\\use_indices", i)
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset CommandInset index_print", i)
+ if i == -1:
+ return
+ k = find_end_of_inset(document.body, i)
+ ctype = get_value(document.body, 'LatexCommand', i, k)
+ if ctype != "printindex*" and ctype != "printsubindex*":
+ i = i + 1
+ continue
+ if indices == "false":
+ del document.body[i:k+1]
+ else:
+ subst = [put_cmd_in_ert("\\" + ctype + "{}")]
+ document.body[i:k+1] = subst
+ i = i + 1
+
+
+def revert_strikeout(document):
+ " Reverts \\strikeout character style "
+ while True:
+ i = find_token(document.body, '\\strikeout', 0)
+ if i == -1:
+ return
+ del document.body[i]
+
+
+def revert_uulinewave(document):
+ " Reverts \\uuline, and \\uwave character styles "
+ while True:
+ i = find_token(document.body, '\\uuline', 0)
+ if i == -1:
+ break
+ del document.body[i]
+ while True:
+ i = find_token(document.body, '\\uwave', 0)
+ if i == -1:
+ return
+ del document.body[i]
+
+
+def revert_ulinelatex(document):
+ " Reverts \\uline character style "
+ i = find_token(document.body, '\\bar under', 0)
+ if i == -1:
+ return
+ insert_to_preamble(0, document,
+ '% Commands inserted by lyx2lyx for proper underlining\n'
+ + '\\PassOptionsToPackage{normalem}{ulem}\n'
+ + '\\usepackage{ulem}\n'
+ + '\\let\\cite@rig\\cite\n'
+ + '\\newcommand{\\b@xcite}[2][\\%]{\\def\\def@pt{\\%}\\def\\pas@pt{#1}\n'
+ + ' \\mbox{\\ifx\\def@pt\\pas@pt\\cite@rig{#2}\\else\\cite@rig[#1]{#2}\\fi}}\n'
+ + '\\renewcommand{\\underbar}[1]{{\\let\\cite\\b@xcite\\uline{#1}}}\n')
+
+
+def revert_custom_processors(document):
+ " Remove bibtex_command and index_command params "
+ i = find_token(document.header, '\\bibtex_command', 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Missing \\bibtex_command.")
+ return
+ del document.header[i]
+ i = find_token(document.header, '\\index_command', 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Missing \\index_command.")
+ return
+ del document.header[i]
+
+
+def convert_nomencl_width(document):
+ " Add set_width param to nomencl_print "
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset CommandInset nomencl_print", i)
+ if i == -1:
+ break
+ document.body.insert(i + 2, "set_width \"none\"")
+ i = i + 1
+
+
+def revert_nomencl_width(document):
+ " Remove set_width param from nomencl_print "
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset CommandInset nomencl_print", i)
+ if i == -1:
+ break
+ j = find_end_of_inset(document.body, i)
+ l = find_token(document.body, "set_width", i, j)
+ if l == -1:
+ document.warning("Can't find set_width option for nomencl_print!")
+ i = j
+ continue
+ del document.body[l]
+ i = i + 1
+
+
+def revert_nomencl_cwidth(document):
+ " Remove width param from nomencl_print "
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset CommandInset nomencl_print", i)
+ if i == -1:
+ break
+ j = find_end_of_inset(document.body, i)
+ l = find_token(document.body, "width", i, j)
+ if l == -1:
+ document.warning("Can't find width option for nomencl_print!")
+ i = j
+ continue
+ width = get_value(document.body, "width", i, j).strip('"')
+ del document.body[l]
+ add_to_preamble(document, ["\\setlength{\\nomlabelwidth}{" + width + "}"])
+ i = i + 1
+
+
+def revert_applemac(document):
+ " Revert applemac encoding to auto "
+ i = 0
+ if document.encoding == "applemac":
+ document.encoding = "auto"
+ i = find_token(document.header, "\\encoding", 0)
+ if i != -1:
+ document.header[i] = "\\encoding auto"
+
+
+def revert_longtable_align(document):
+ " Remove longtable alignment setting "
+ i = 0
+ j = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset Tabular", i)
+ if i == -1:
+ break
+ # the alignment is 2 lines below \\begin_inset Tabular
+ j = document.body[i+2].find("longtabularalignment")
+ if j == -1:
+ break
+ document.body[i+2] = document.body[i+2][:j-1]
+ document.body[i+2] = document.body[i+2] + '>'
+ i = i + 1
+
+
+def revert_branch_filename(document):
+ " Remove \\filename_suffix parameter from branches "
+ i = 0
+ while True:
+ i = find_token(document.header, "\\filename_suffix", i)
+ if i == -1:
+ return
+ del document.header[i]
+
+
+def revert_paragraph_indentation(document):
+ " Revert custom paragraph indentation to preamble code "
+ i = 0
+ while True:
+ i = find_token(document.header, "\\paragraph_indentation", i)
+ if i == -1:
+ break
+ # only remove the preamble line if default
+ # otherwise also write the value to the preamble
+ length = get_value(document.header, "\\paragraph_indentation", i)
+ if length == "default":
+ del document.header[i]
+ break
+ else:
+ # handle percent lengths
+ # latex_length returns "bool,length"
+ length = latex_length(length).split(",")[1]
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, ["\\setlength{\\parindent}{" + length + "}"])
+ del document.header[i]
+ i = i + 1
+
+
+def revert_percent_skip_lengths(document):
+ " Revert relative lengths for paragraph skip separation to preamble code "
+ i = 0
+ while True:
+ i = find_token(document.header, "\\defskip", i)
+ if i == -1:
+ break
+ length = get_value(document.header, "\\defskip", i)
+ # only revert when a custom length was set and when
+ # it used a percent length
+ if length not in ('smallskip', 'medskip', 'bigskip'):
+ # handle percent lengths
+ length = latex_length(length)
+ # latex_length returns "bool,length"
+ percent = length.split(",")[0]
+ length = length.split(",")[1]
+ if percent == "True":
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, ["\\setlength{\\parskip}{" + length + "}"])
+ # set defskip to medskip as default
+ document.header[i] = "\\defskip medskip"
+ i = i + 1
+
+
+def revert_percent_vspace_lengths(document):
+ " Revert relative VSpace lengths to ERT "
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset VSpace", i)
+ if i == -1:
+ break
+ # only revert if a custom length was set and if
+ # it used a percent length
+ line = document.body[i]
+ r = re.compile(r'\\begin_inset VSpace (.*)$')
+ m = r.match(line)
+ length = m.group(1)
+ if length not in ('defskip', 'smallskip', 'medskip', 'bigskip', 'vfill'):
+ # check if the space has a star (protected space)
+ protected = (document.body[i].rfind("*") != -1)
+ if protected:
+ length = length.rstrip('*')
+ # handle percent lengths
+ length = latex_length(length)
+ # latex_length returns "bool,length"
+ percent = length.split(",")[0]
+ length = length.split(",")[1]
+ # revert the VSpace inset to ERT
+ if percent == "True":
+ if protected:
+ subst = [put_cmd_in_ert("\\vspace*{" + length + "}")]
+ else:
+ subst = [put_cmd_in_ert("\\vspace{" + length + "}")]
+ document.body[i:i+2] = subst
+ i = i + 1
+
+
+def revert_percent_hspace_lengths(document):
+ " Revert relative HSpace lengths to ERT "
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset space \\hspace", i)
+ if i == -1:
+ break
+ protected = (document.body[i].find("\\hspace*{}") != -1)
+ # only revert if a custom length was set and if
+ # it used a percent length
+ length = get_value(document.body, '\\length', i+1)
+ if length == '':
+ document.warning("Malformed lyx document: Missing '\\length' in Space inset.")
+ return
+ # handle percent lengths
+ length = latex_length(length)
+ # latex_length returns "bool,length"
+ percent = length.split(",")[0]
+ length = length.split(",")[1]
+ # revert the HSpace inset to ERT
+ if percent == "True":
+ if protected:
+ subst = [put_cmd_in_ert("\\hspace*{" + length + "}")]
+ else:
+ subst = [put_cmd_in_ert("\\hspace{" + length + "}")]
+ document.body[i:i+3] = subst
+ i = i + 2
+
+
+def revert_hspace_glue_lengths(document):
+ " Revert HSpace glue lengths to ERT "
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset space \\hspace", i)
+ if i == -1:
+ break
+ protected = (document.body[i].find("\\hspace*{}") != -1)
+ length = get_value(document.body, '\\length', i+1)
+ if length == '':
+ document.warning("Malformed lyx document: Missing '\\length' in Space inset.")
+ return
+ # only revert if the length contains a plus or minus at pos != 0
+ glue = re.compile(r'.+[\+-]')
+ if glue.search(length):
+ # handle percent lengths
+ # latex_length returns "bool,length"
+ length = latex_length(length).split(",")[1]
+ # revert the HSpace inset to ERT
+ if protected:
+ subst = [put_cmd_in_ert("\\hspace*{" + length + "}")]
+ else:
+ subst = [put_cmd_in_ert("\\hspace{" + length + "}")]
+ document.body[i:i+3] = subst
+ i = i + 2
+
+def convert_author_id(document):
+ " Add the author_id to the \\author definition and make sure 0 is not used"
+ i = 0
+ j = 1
+ while True:
+ i = find_token(document.header, "\\author", i)
+ if i == -1:
+ break
+
+ r = re.compile(r'(\\author) (\".*\")\s?(.*)$')
+ m = r.match(document.header[i])
+ if m != None:
+ name = m.group(2)
+
+ email = ''
+ if m.lastindex == 3:
+ email = m.group(3)
+ document.header[i] = "\\author %i %s %s" % (j, name, email)
+ j = j + 1
+ i = i + 1
+
+ k = 0
+ while True:
+ k = find_token(document.body, "\\change_", k)
+ if k == -1:
+ break
+
+ change = document.body[k].split(' ');
+ if len(change) == 3:
+ type = change[0]
+ author_id = int(change[1])
+ time = change[2]
+ document.body[k] = "%s %i %s" % (type, author_id + 1, time)
+ k = k + 1
+
+def revert_author_id(document):
+ " Remove the author_id from the \\author definition "
+ i = 0
+ j = 0
+ idmap = dict()
+ while True:
+ i = find_token(document.header, "\\author", i)
+ if i == -1:
+ break
+
+ r = re.compile(r'(\\author) (\d+) (\".*\")\s?(.*)$')
+ m = r.match(document.header[i])
+ if m != None:
+ author_id = int(m.group(2))
+ idmap[author_id] = j
+ name = m.group(3)
+
+ email = ''
+ if m.lastindex == 4:
+ email = m.group(4)
+ document.header[i] = "\\author %s %s" % (name, email)
+ i = i + 1
+ j = j + 1
+
+ k = 0
+ while True:
+ k = find_token(document.body, "\\change_", k)
+ if k == -1:
+ break
+
+ change = document.body[k].split(' ');
+ if len(change) == 3:
+ type = change[0]
+ author_id = int(change[1])
+ time = change[2]
+ document.body[k] = "%s %i %s" % (type, idmap[author_id], time)
+ k = k + 1
+
+
+def revert_suppress_date(document):
+ " Revert suppressing of default document date to preamble code "
+ i = 0
+ while True:
+ i = find_token(document.header, "\\suppress_date", i)
+ if i == -1:
+ break
+ # remove the preamble line and write to the preamble
+ # when suppress_date was true
+ date = get_value(document.header, "\\suppress_date", i)
+ if date == "true":
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, ["\\date{}"])
+ del document.header[i]
+ i = i + 1
+
+
+def revert_mhchem(document):
+ "Revert mhchem loading to preamble code"
+ i = 0
+ j = 0
+ k = 0
+ i = find_token(document.header, "\\use_mhchem 1", 0)
+ if i != -1:
+ mhchem = "auto"
+ else:
+ i = find_token(document.header, "\\use_mhchem 2", 0)
+ if i != -1:
+ mhchem = "on"
+ if mhchem == "auto":
+ j = find_token(document.body, "\\cf{", 0)
+ if j != -1:
+ mhchem = "on"
+ else:
+ j = find_token(document.body, "\\ce{", 0)
+ if j != -1:
+ mhchem = "on"
+ if mhchem == "on":
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, ["\\PassOptionsToPackage{version=3}{mhchem}"])
+ add_to_preamble(document, ["\\usepackage{mhchem}"])
+ k = find_token(document.header, "\\use_mhchem", 0)
+ if k == -1:
+ document.warning("Malformed LyX document: Could not find mhchem setting.")
+ return
+ del document.header[k]
+
+
##
# Conversion hub
#
[350, []],
[351, []],
[352, [convert_splitindex]],
- [353, []]
+ [353, []],
+ [354, []],
+ [355, []],
+ [356, []],
+ [357, []],
+ [358, []],
+ [359, [convert_nomencl_width]],
+ [360, []],
+ [361, []],
+ [362, []],
+ [363, []],
+ [364, []],
+ [365, []],
+ [366, []],
+ [367, []],
+ [368, []],
+ [369, [convert_author_id]],
+ [370, []],
+ [371, []]
]
-revert = [[352, [revert_subindex]],
+revert = [[370, [revert_mhchem]],
+ [369, [revert_suppress_date]],
+ [368, [revert_author_id]],
+ [367, [revert_hspace_glue_lengths]],
+ [366, [revert_percent_vspace_lengths, revert_percent_hspace_lengths]],
+ [365, [revert_percent_skip_lengths]],
+ [364, [revert_paragraph_indentation]],
+ [363, [revert_branch_filename]],
+ [362, [revert_longtable_align]],
+ [361, [revert_applemac]],
+ [360, []],
+ [359, [revert_nomencl_cwidth]],
+ [358, [revert_nomencl_width]],
+ [357, [revert_custom_processors]],
+ [356, [revert_ulinelatex]],
+ [355, [revert_uulinewave]],
+ [354, [revert_strikeout]],
+ [353, [revert_printindexall]],
+ [352, [revert_subindex]],
[351, [revert_splitindex]],
[350, [revert_backgroundcolor]],
[349, [revert_outputformat]],
projects / lyx.git / blobdiff