# -*- coding: utf-8 -*-
# This file is part of lyx2lyx
# -*- coding: utf-8 -*-
-# Copyright (C) 2010 The LyX team
+# Copyright (C) 2011 The LyX team
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
""" Convert files to the file format generated by lyx 2.0"""
return True
-# DO NOT USE THIS ROUTINE ANY MORE. Better yet, replace the uses that
-# have been made of it with uses of put_cmd_in_ert.
-def old_put_cmd_in_ert(string):
- for rep in unicode_reps:
- string = string.replace(rep[1], rep[0].replace('\\\\', '\\'))
- string = string.replace('\\', "\\backslash\n")
- string = "\\begin_inset ERT\nstatus collapsed\n\\begin_layout Plain Layout\n" \
- + string + "\n\\end_layout\n\\end_inset"
- return string
-
-
###############################################################################
###
### Conversion and reversion routines
# 2.) check font settings
# defaults
- roman = sans = typew = default
+ roman = sans = typew = "default"
osf = False
sf_scale = tt_scale = 100.0
sf += 'Scale=' + str(sf_scale / 100.0) + ','
sf += 'Mapping=tex-text]{' + sans + '}'
pretext.append(sf)
- if typewriter != "default":
+ if typew != "default":
tw = '\\setmonofont'
if tt_scale != 100.0:
tw += '[Scale=' + str(tt_scale / 100.0) + ']'
- tw += '{' + typewriter + '}'
+ tw += '{' + typew + '}'
pretext.append(tw)
if osf:
pretext.append('\\defaultfontfeatures{Numbers=OldStyle}')
" Remove the author_id from the \\author definition "
i = 0
anum = 0
- rx = re.compile(r'(\\author)\s+(\d+)\s+(\".*\")\s*(.*)$')
+ rx = re.compile(r'(\\author)\s+(-?\d+)\s+(\".*\")\s*(.*)$')
idmap = dict()
while True:
del document.header[i]
+def convert_mhchem(document):
+ "Set mhchem to off for versions older than 1.6.x"
+ if document.start < 277:
+ # LyX 1.5.x and older did never load mhchem.
+ # Therefore we must switch it off: Documents that use mhchem have
+ # a manual \usepackage anyway, and documents not using mhchem but
+ # custom macros with the same names as mhchem commands might get
+ # corrupted if mhchem is automatically loaded.
+ mhchem = 0 # off
+ else:
+ # LyX 1.6.x did always load mhchem automatically.
+ mhchem = 1 # auto
+ i = find_token(document.header, "\\use_esint", 0)
+ if i == -1:
+ # pre-1.5.x document
+ i = find_token(document.header, "\\use_amsmath", 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Could not find amsmath os esint setting.")
+ return
+ document.header.insert(i + 1, "\\use_mhchem %d" % mhchem)
+
+
def revert_mhchem(document):
"Revert mhchem loading to preamble code"
add_to_preamble(document, ["\\usepackage{multirow}"])
begin_table = 0
- mrstarts = []
while True:
# find begin/end of table
begin_table = find_token(document.body, '<lyxtabular version=', begin_table)
numrows = int(numrows)
numcols = int(numcols)
except:
- document.warning(numrows)
document.warning("Unable to determine rows and columns!")
begin_table = end_table
continue
-
+
+ mrstarts = []
multirows = []
# collect info on rows and columns of this table.
begin_row = begin_table
multirows[row][column][2] = 4 # in multirow
begin_cell = end_cell
begin_row = end_row
- # end for loops
- begin_table = end_table
+ # end of table info collection
+
+ # work from the back to avoid messing up numbering
+ mrstarts.reverse()
+ for m in mrstarts:
+ row = m[0]
+ col = m[1]
+ # get column width
+ col_width = get_option_value(document.body[begin_table + 2 + col], "width")
+ # "0pt" means that no width is specified
+ if not col_width or col_width == "0pt":
+ col_width = "*"
+ # determine the number of cells that are part of the multirow
+ nummrs = 1
+ for r in range(row + 1, numrows):
+ if multirows[r][col][2] != 4:
+ break
+ nummrs += 1
+ # take the opportunity to revert this line
+ lineno = multirows[r][col][0]
+ document.body[lineno] = document.body[lineno].\
+ replace(' multirow="4" ', ' ').\
+ replace('valignment="middle"', 'valignment="top"').\
+ replace(' topline="true" ', ' ')
+ # remove bottom line of previous multirow-part cell
+ lineno = multirows[r-1][col][0]
+ document.body[lineno] = document.body[lineno].replace(' bottomline="true" ', ' ')
+ # revert beginning cell
+ bcell = multirows[row][col][0]
+ ecell = multirows[row][col][1]
+ document.body[bcell] = document.body[bcell].\
+ replace(' multirow="3" ', ' ').\
+ replace('valignment="middle"', 'valignment="top"')
+ blay = find_token(document.body, "\\begin_layout", bcell, ecell)
+ if blay == -1:
+ document.warning("Can't find layout for cell!")
+ continue
+ bend = find_end_of_layout(document.body, blay)
+ if bend == -1:
+ document.warning("Can't find end of layout for cell!")
+ continue
+ # do the later one first, so as not to mess up the numbering
+ # we are wrapping the whole cell in this ert
+ # so before the end of the layout...
+ document.body[bend:bend] = put_cmd_in_ert("}")
+ # ...and after the beginning
+ document.body[blay + 1:blay + 1] = \
+ put_cmd_in_ert("\\multirow{" + str(nummrs) + "}{" + col_width + "}{")
- # work from the back to avoid messing up numbering
- mrstarts.reverse()
- for m in mrstarts:
- row = m[0]
- col = m[1]
- # get column width
- col_width = get_option_value(document.body[begin_table + 2 + col], "width")
- # "0pt" means that no width is specified
- if not col_width or col_width == "0pt":
- col_width = "*"
- # determine the number of cells that are part of the multirow
- nummrs = 1
- for r in range(row + 1, numrows):
- if multirows[r][col][2] != 4:
- break
- nummrs += 1
- # take the opportunity to revert this line
- lineno = multirows[r][col][0]
- document.body[lineno] = document.body[lineno].\
- replace(' multirow="4" ', ' ').\
- replace('valignment="middle"', 'valignment="top"').\
- replace(' topline="true" ', ' ')
- # remove bottom line of previous multirow-part cell
- lineno = multirows[r-1][col][0]
- document.body[lineno] = document.body[lineno].replace(' bottomline="true" ', ' ')
- # revert beginning cell
- bcell = multirows[row][col][0]
- ecell = multirows[row][col][1]
- document.body[bcell] = document.body[bcell].\
- replace(' multirow="3" ', ' ').\
- replace('valignment="middle"', 'valignment="top"')
- blay = find_token(document.body, "\\begin_layout", bcell, ecell)
- if blay == -1:
- document.warning("Can't find layout for cell!")
- continue
- bend = find_end_of_layout(document.body, blay)
- if bend == -1:
- document.warning("Can't find end of layout for cell!")
- continue
- # do the later one first, so as not to mess up the numbering
- # we are wrapping the whole cell in this ert
- # so before the end of the layout...
- document.body[bend:bend] = put_cmd_in_ert("}")
- # ...and after the beginning
- document.body[blay + 1:blay + 1] = \
- put_cmd_in_ert("\\multirow{" + str(nummrs) + "}{" + col_width + "}{")
+ begin_table = end_table
def convert_math_output(document):
i = z
continue
document.body.insert(k + 1, "use_makebox 0")
- i = z + 1
+ i = blay + 1 # not z + 1 (box insets may be nested)
def revert_IEEEtran(document):
def convert_mathdots(document):
" Load mathdots automatically "
- i = find_token(document.header, "\\use_esint" , 0)
- if i != -1:
- document.header.insert(i + 1, "\\use_mathdots 1")
+ i = find_token(document.header, "\\use_mhchem" , 0)
+ if i == -1:
+ i = find_token(document.header, "\\use_esint" , 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Can't find \\use_mhchem.")
+ return;
+ j = find_token(document.preamble, "\\usepackage{mathdots}", 0)
+ if j == -1:
+ document.header.insert(i + 1, "\\use_mathdots 0")
+ else:
+ document.header.insert(i + 1, "\\use_mathdots 2")
+ del document.preamble[j]
def revert_mathdots(document):
mathdots = find_token(document.header, "\\use_mathdots" , 0)
if mathdots == -1:
- document.warning("No \\usemathdots line. Assuming auto.")
+ document.warning("No \\use_mathdots line. Assuming auto.")
else:
val = get_value(document.header, "\\use_mathdots", mathdots)
del document.header[mathdots]
return
if usedots == 2:
# force load case
- add_to_preamble(["\\usepackage{mathdots}"])
+ add_to_preamble(document, ["\\usepackage{mathdots}"])
return
# so we are in the auto case. we want to load mathdots if \iddots is used.
# only need to do it once!
return
+chapters = ("amsbook", "book", "docbook-book", "elsart", "extbook", "extreport",
+ "jbook", "jreport", "jsbook", "literate-book", "literate-report", "memoir",
+ "mwbk", "mwrep", "recipebook", "report", "scrbook", "scrreprt", "svmono",
+ "svmult", "tbook", "treport", "tufte-book")
def convert_bibtex_clearpage(document):
" insert a clear(double)page bibliographystyle if bibtotoc option is used "
+ if document.textclass not in chapters:
+ return
+
i = find_token(document.header, '\\papersides', 0)
sides = 0
if i == -1:
document.warning("Can't find end of layout at line " + str(beg))
beg += 1
continue
+
# we are now going to replace newline insets within this layout
# by new instances of this layout. so we have repeated layouts
# instead of newlines.
+
+ # if the paragraph has any customization, however, we do not want to
+ # do the replacement.
+ if document.body[beg + 1].startswith("\\"):
+ beg = end + 1
+ continue
+
ns = beg
while True:
ns = find_token(document.body, "\\begin_inset Newline newline", ns, end)
# do ns properly, too
newlines = (ne - ns) - len(subst)
ns += newlines + 2
- end += newlines + 1
+ end += newlines + 2
+
# ok, we now want to find out if the next layout is the
# same as this one. if so, we will insert an extra copy of it
didit = False
" Revert multirow cells with offset in tables to TeX-code"
# this routine is the same as the revert_multirow routine except that
# it checks additionally for the offset
- i = 0
- begin_table = 0
- bottom_index = 0
- multirowOffset = False
- # cell type 3 is multirow begin cell
- i = find_token(document.body, '<cell multirow="3" mroffset=', i)
+
+ # first, let's find out if we need to do anything
+ i = find_token(document.body, '<cell multirow="3" mroffset=', 0)
if i == -1:
return
- # a multirow cell with offset was found
- multirowOffset = True
+
+ add_to_preamble(document, ["\\usepackage{multirow}"])
+
+ rgx = re.compile(r'mroffset="[^"]+?"')
+ begin_table = 0
+
while True:
- # find begin/end of table
- begin_table = find_token(document.body, '<lyxtabular version=', begin_table)
- if begin_table == -1:
- break
- end_table = find_token(document.body, '</lyxtabular>', begin_table)
- if end_table == -1:
- document.warning("Malformed LyX document: Could not find end of table.")
- break
- # store the number of rows
- begin = document.body[begin_table].find('rows="')
- end = document.body[begin_table].find('" ', begin)
- rows = document.body[begin_table][begin + 6:end]
- # store the number of columns
- begin = document.body[begin_table].find('columns="')
- end = document.body[begin_table].find('">', begin)
- columns = document.body[begin_table][begin + 9:end]
- # find column number of the multirows with offset
- begin_row = begin_table
- for row in range(int(rows)):
- begin_row = find_token(document.body, '<row>', begin_row)
- begin_cell = begin_row
- for column in range(int(columns)):
- begin_cell = find_token(document.body, '<cell ', begin_cell)
- i = document.body[begin_cell].find('multirow="3" mroffset=')
- if i <> -1:
- # we found a multirow in column number column - 1
- # store column width
- begin = document.body[begin_table + 2 + column].find('width="')
- end = document.body[begin_table + 2 + column].find('">', begin)
- col_width = document.body[begin_table + 2 + column][begin + 7:end]
+ # find begin/end of table
+ begin_table = find_token(document.body, '<lyxtabular version=', begin_table)
+ if begin_table == -1:
+ break
+ end_table = find_end_of(document.body, begin_table, '<lyxtabular', '</lyxtabular>')
+ if end_table == -1:
+ document.warning("Malformed LyX document: Could not find end of table.")
+ begin_table += 1
+ continue
+ # does this table have multirow?
+ i = find_token(document.body, '<cell multirow="3"', begin_table, end_table)
+ if i == -1:
+ begin_table = end_table
+ continue
+
+ # store the number of rows and columns
+ numrows = get_option_value(document.body[begin_table], "rows")
+ numcols = get_option_value(document.body[begin_table], "columns")
+ try:
+ numrows = int(numrows)
+ numcols = int(numcols)
+ except:
+ document.warning("Unable to determine rows and columns!")
+ begin_table = end_table
+ continue
+
+ mrstarts = []
+ multirows = []
+ # collect info on rows and columns of this table.
+ begin_row = begin_table
+ for row in range(numrows):
+ begin_row = find_token(document.body, '<row>', begin_row, end_table)
+ if begin_row == -1:
+ document.warning("Can't find row " + str(row + 1))
+ break
+ end_row = find_end_of(document.body, begin_row, '<row>', '</row>')
+ if end_row == -1:
+ document.warning("Can't find end of row " + str(row + 1))
+ break
+ begin_cell = begin_row
+ multirows.append([])
+ for column in range(numcols):
+ begin_cell = find_token(document.body, '<cell ', begin_cell, end_row)
+ if begin_cell == -1:
+ document.warning("Can't find column " + str(column + 1) + \
+ "in row " + str(row + 1))
+ break
+ # NOTE
+ # this will fail if someone puts "</cell>" in a cell, but
+ # that seems fairly unlikely.
+ end_cell = find_end_of(document.body, begin_cell, '<cell', '</cell>')
+ if end_cell == -1:
+ document.warning("Can't find end of column " + str(column + 1) + \
+ "in row " + str(row + 1))
+ break
+ multirows[row].append([begin_cell, end_cell, 0])
+ if document.body[begin_cell].find('multirow="3" mroffset=') != -1:
+ multirows[row][column][2] = 3 # begin multirow
+ mrstarts.append([row, column])
+ elif document.body[begin_cell].find('multirow="4"') != -1:
+ multirows[row][column][2] = 4 # in multirow
+ begin_cell = end_cell
+ begin_row = end_row
+ # end of table info collection
+
+ # work from the back to avoid messing up numbering
+ mrstarts.reverse()
+ for m in mrstarts:
+ row = m[0]
+ col = m[1]
+ # get column width
+ col_width = get_option_value(document.body[begin_table + 2 + col], "width")
# "0pt" means that no width is specified
- if col_width == "0pt":
+ if not col_width or col_width == "0pt":
col_width = "*"
# determine the number of cells that are part of the multirow
- begin_row2 = begin_table
- # we have the multirow begin cell as minimal span
- span = 1
- # go one row behind the row where we found the multirow begin
- row2 = -1
- while row2 < row:
- begin_row2 = find_token(document.body, '<row>', begin_row2)
- row2 += 1
- begin_row2 += 1
- # step now through all rows until we reach the last table row
- rows2 = row
- while row2 < rows:
- begin_row2 = find_token(document.body, '<row>', begin_row2)
- begin_cell2 = begin_row2
- # look now for the column-th cell in the row
- column2 = 0
- while column2 < column:
- begin_cell2 = find_token(document.body, '<cell ', begin_cell2)
- column2 += 1
- begin_cell2 += 1
- # cell type 4 is multirow-part cell
- begin_cell2 = find_token(document.body, '<cell ', begin_cell2)
- j = document.body[begin_cell2].find('multirow="4"')
- if j <> -1:
- span += 1
+ nummrs = 1
+ for r in range(row + 1, numrows):
+ if multirows[r][col][2] != 4:
+ break
+ nummrs += 1
+ # take the opportunity to revert this line
+ lineno = multirows[r][col][0]
+ document.body[lineno] = document.body[lineno].\
+ replace(' multirow="4" ', ' ').\
+ replace('valignment="middle"', 'valignment="top"').\
+ replace(' topline="true" ', ' ')
# remove bottom line of previous multirow-part cell
- if span > 1:
- document.body[bottom_index] = document.body[bottom_index].replace(' bottomline="true" ', ' ')
- # save index to be later able to remove bottom line
- bottom_index = begin_cell2
- # remove the multirow tag, set the valignment to top
- # and remove the top line
- document.body[begin_cell2] = document.body[begin_cell2].replace(' multirow="4" ', ' ')
- document.body[begin_cell2] = document.body[begin_cell2].replace('valignment="middle"', 'valignment="top"')
- document.body[begin_cell2] = document.body[begin_cell2].replace(' topline="true" ', ' ')
- else:
- break
- begin_row2 = find_token(document.body, '</row>', begin_row2)
- # remove the multirow tag, set the valignment to top,
- # remove the the bottom line and offset
- document.body[begin_cell] = document.body[begin_cell].replace(' multirow="3" ', ' ')
- document.body[begin_cell] = document.body[begin_cell].replace('valignment="middle"', 'valignment="top"')
- # only remove the bottom line if it is not a single cell as multirow
- if span > 1:
- document.body[begin_cell] = document.body[begin_cell].replace(' bottomline="true" ', ' ')
- document.body[begin_cell] = document.body[begin_cell].replace(' mroffset=', '')
- # store the offset and remove it
- begin = document.body[begin_cell].find('"')
- end = document.body[begin_cell].find('" ', begin)
- offset = document.body[begin_cell][begin + 1:end]
- document.body[begin_cell] = document.body[begin_cell].replace(document.body[begin_cell][begin:end + 1], '')
- # write ERT to create the multirow cell
- cend = find_token(document.body, "</cell>", begin_cell)
- if cend == -1:
- document.warning("Malformed LyX document: Could not find end of tabular cell.")
- i += 1
- continue
- blay = find_token(document.body, "\\begin_layout", begin_cell, cend)
+ lineno = multirows[r-1][col][0]
+ document.body[lineno] = document.body[lineno].replace(' bottomline="true" ', ' ')
+ # revert beginning cell
+ bcell = multirows[row][col][0]
+ ecell = multirows[row][col][1]
+ offset = get_option_value(document.body[bcell], "mroffset")
+ document.body[bcell] = document.body[bcell].\
+ replace(' multirow="3" ', ' ').\
+ replace('valignment="middle"', 'valignment="top"')
+ # remove mroffset option
+ document.body[bcell] = rgx.sub('', document.body[bcell])
+
+ blay = find_token(document.body, "\\begin_layout", bcell, ecell)
if blay == -1:
document.warning("Can't find layout for cell!")
- i = j
continue
bend = find_end_of_layout(document.body, blay)
if bend == -1:
document.warning("Can't find end of layout for cell!")
- i = cend
continue
# do the later one first, so as not to mess up the numbering
# we are wrapping the whole cell in this ert
# so before the end of the layout...
document.body[bend:bend] = put_cmd_in_ert("}")
# ...and after the beginning
- document.body[blay + 1:blay + 1] = put_cmd_in_ert("\\multirow{" + str(span) + "}{" + col_width + "}[" + offset + "]{")
- # set index to end of current cell (that is now much bigger due to the ERT addition)
- begin_cell = find_token(document.body, '</cell>', begin_cell) + 1
- begin_row = find_token(document.body, '</row>', begin_row) + 1
+ document.body[blay + 1:blay + 1] = \
+ put_cmd_in_ert("\\multirow{" + str(nummrs) + "}{" + col_width + "}[" \
+ + offset + "]{")
+
+ # on to the next table
+ begin_table = end_table
+
+
+def revert_script(document):
+ " Convert subscript/superscript inset to TeX code "
+ i = 0
+ foundsubscript = False
+ while 1:
+ i = find_token(document.body, '\\begin_inset script', i)
+ if i == -1:
+ break
+ z = find_end_of_inset(document.body, i)
+ if z == -1:
+ document.warning("Malformed LyX document: Can't find end of script inset.")
+ i += 1
+ continue
+ blay = find_token(document.body, "\\begin_layout", i, z)
+ if blay == -1:
+ document.warning("Malformed LyX document: Can't find layout in script inset.")
+ i = z
+ continue
+
+ if check_token(document.body[i], "\\begin_inset script subscript"):
+ subst = '\\textsubscript{'
+ foundsubscript = True
+ elif check_token(document.body[i], "\\begin_inset script superscript"):
+ subst = '\\textsuperscript{'
+ else:
+ document.warning("Malformed LyX document: Unknown type of script inset.")
+ i = z
+ continue
+ bend = find_end_of_layout(document.body, blay)
+ if bend == -1 or bend > z:
+ document.warning("Malformed LyX document: Can't find end of layout in script inset.")
+ i = z
+ continue
+ # remove the \end_layout \end_inset pair
+ document.body[bend:z + 1] = put_cmd_in_ert("}")
+ document.body[i:blay + 1] = put_cmd_in_ert(subst)
+ i += 1
+ # these classes provide a \textsubscript command:
+ # FIXME: Would be nice if we could use the information of the .layout file here
+ classes = ["memoir", "scrartcl", "scrbook", "scrlttr2", "scrreprt"]
+ if foundsubscript and find_token_exact(classes, document.textclass, 0) == -1:
+ add_to_preamble(document, ['\\usepackage{subscript}'])
+
+
+def convert_use_xetex(document):
+ " convert \\use_xetex to \\use_non_tex_fonts "
+ i = 0
+ i = find_token(document.header, "\\use_xetex", 0)
+ if i == -1:
+ return
+
+ val = get_value(document.header, "\\use_xetex", 0)
+ document.header[i] = "\\use_non_tex_fonts " + val
+
+
+def revert_use_xetex(document):
+ " revert \\use_non_tex_fonts to \\use_xetex "
+ i = 0
+ i = find_token(document.header, "\\use_non_tex_fonts", 0)
+ if i == -1:
+ document.warning("Malformed document. No \\use_non_tex_fonts param!")
+ return
+
+ val = get_value(document.header, "\\use_non_tex_fonts", 0)
+ document.header[i] = "\\use_xetex " + val
+
+
+def revert_labeling(document):
+ koma = ("scrartcl", "scrarticle-beamer", "scrbook", "scrlettr",
+ "scrlttr2", "scrreprt")
+ if document.textclass in koma:
+ return
+ i = 0
+ while True:
+ i = find_token_exact(document.body, "\\begin_layout Labeling", i)
+ if i == -1:
+ return
+ document.body[i] = "\\begin_layout List"
+
+
+def revert_langpack(document):
+ " revert \\language_package parameter "
+ i = 0
+ i = find_token(document.header, "\\language_package", 0)
+ if i == -1:
+ document.warning("Malformed document. No \\language_package param!")
+ return
+
+ del document.header[i]
+
+
+def convert_langpack(document):
+ " Add \\language_package parameter "
+ i = find_token(document.header, "\language" , 0)
+ if i == -1:
+ document.warning("Malformed document. No \\language defined!")
+ return
+
+ document.header.insert(i + 1, "\\language_package default")
- # go to the next table
- begin_table = end_table + 1
- if multirowOffset == True:
- add_to_preamble(document, ["\\usepackage{multirow}"])
+def revert_tabularwidth(document):
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset Tabular", i)
+ if i == -1:
+ return
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Unable to find end of Tabular inset at line " + str(i))
+ i += 1
+ continue
+ i += 1
+ features = find_token(document.body, "<features", i, j)
+ if features == -1:
+ document.warning("Can't find any features in Tabular inset at line " + str(i))
+ i = j
+ continue
+ if document.body[features].find('alignment="tabularwidth"') != -1:
+ remove_option(document.body, features, 'tabularwidth')
+
+def revert_html_css_as_file(document):
+ if not del_token(document.header, '\\html_css_as_file', 0):
+ document.warning("Malformed LyX document: Missing \\html_css_as_file.")
##
[368, []],
[369, [convert_author_id]],
[370, []],
- [371, []],
+ [371, [convert_mhchem]],
[372, []],
[373, [merge_gbrief]],
[374, []],
[404, [convert_prettyref]],
[405, []],
[406, [convert_passthru]],
- [407, []]
+ [407, []],
+ [408, []],
+ [409, [convert_use_xetex]],
+ [410, []],
+ [411, [convert_langpack]],
+ [412, []],
+ [413, []]
]
-revert = [[406, [revert_multirowOffset]],
+revert = [[412, [revert_html_css_as_file]],
+ [411, [revert_tabularwidth]],
+ [410, [revert_langpack]],
+ [409, [revert_labeling]],
+ [408, [revert_use_xetex]],
+ [407, [revert_script]],
+ [406, [revert_multirowOffset]],
[405, [revert_passthru]],
[404, []],
[403, [revert_refstyle]],
projects / lyx.git / blobdiff