import unicodedata
import sys, os
-from parser_tools import find_token, find_end_of, find_tokens, get_value, get_value_string
+from parser_tools import find_token, find_end_of, find_tokens, \
+ find_end_of_inset, find_end_of_layout, get_value, get_value_string
+
+from lyx2lyx_tools import add_to_preamble, insert_to_preamble, \
+ put_cmd_in_ert, lyx2latex, latex_length, revert_flex_inset, \
+ revert_font_attrs, revert_layout_command, hex2ratio
####################################################################
# Private helper functions
def remove_option(document, m, option):
+ ''' removes option from line m. returns whether we did anything '''
l = document.body[m].find(option)
- if l != -1:
- val = document.body[m][l:].split('"')[1]
- document.body[m] = document.body[m][:l - 1] + document.body[m][l+len(option + '="' + val + '"'):]
- return l
-
-def find_end_of_inset(lines, i):
- " Find end of inset, where lines[i] is included."
- return find_end_of(lines, i, "\\begin_inset", "\\end_inset")
-
-
-# Note that text can be either a list of lines or a single line.
-def add_to_preamble(document, text):
- """ Add text to the preamble if it is not already there.
- Only the first line is checked!"""
-
- if not type(text) is list:
- # split on \n just in case
- # it'll give us the one element list we want
- # if there's no \n, too
- text = text.split('\n')
-
- if find_token(document.preamble, text[0], 0) != -1:
- return
-
- document.preamble.extend(text)
-
-
-def insert_to_preamble(index, document, text):
- """ Insert text to the preamble at a given line"""
-
- document.preamble.insert(index, text)
-
-
-def read_unicodesymbols():
- " Read the unicodesymbols list of unicode characters and corresponding commands."
- pathname = os.path.abspath(os.path.dirname(sys.argv[0]))
- fp = open(os.path.join(pathname.strip('lyx2lyx'), 'unicodesymbols'))
- spec_chars = []
- # Two backslashes, followed by some non-word character, and then a character
- # in brackets. The idea is to check for constructs like: \"{u}, which is how
- # they are written in the unicodesymbols file; but they can also be written
- # as: \"u or even \" u.
- r = re.compile(r'\\\\(\W)\{(\w)\}')
- for line in fp.readlines():
- if line[0] != '#' and line.strip() != "":
- line=line.replace(' "',' ') # remove all quotation marks with spaces before
- line=line.replace('" ',' ') # remove all quotation marks with spaces after
- line=line.replace(r'\"','"') # replace \" by " (for characters with diaeresis)
- try:
- [ucs4,command,dead] = line.split(None,2)
- if command[0:1] != "\\":
- continue
- spec_chars.append([command, unichr(eval(ucs4))])
- except:
- continue
- m = r.match(command)
- if m != None:
- command = "\\\\"
- # If the character is a double-quote, then we need to escape it, too,
- # since it is done that way in the LyX file.
- if m.group(1) == "\"":
- command += "\\"
- commandbl = command
- command += m.group(1) + m.group(2)
- commandbl += m.group(1) + ' ' + m.group(2)
- spec_chars.append([command, unichr(eval(ucs4))])
- spec_chars.append([commandbl, unichr(eval(ucs4))])
- fp.close()
- return spec_chars
-
-
-unicode_reps = read_unicodesymbols()
+ if l == -1:
+ return False
+ val = document.body[m][l:].split('"')[1]
+ document.body[m] = document.body[m][:l - 1] + document.body[m][l+len(option + '="' + val + '"'):]
+ return True
# DO NOT USE THIS ROUTINE ANY MORE. Better yet, replace the uses that
return string
-# This routine wraps some content in an ERT inset.
-#
-# NOTE: The function accepts either a single string or a LIST of strings as
-# argument. But it returns a LIST of strings, split on \n, so that it does
-# not have embedded newlines.
-#
-# This is how lyx2lyx represents a LyX document: as a list of strings,
-# each representing a line of a LyX file. Embedded newlines confuse
-# lyx2lyx very much.
-#
-# A call to this routine will often go something like this:
-# i = find_token('\\begin_inset FunkyInset', ...)
-# ...
-# j = find_end_of_inset(document.body, i)
-# content = ...extract content from insets
-# # that could be as simple as:
-# # content = lyx2latex(document[i:j + 1])
-# ert = put_cmd_in_ert(content)
-# document.body[i:j] = ert
-# Now, before we continue, we need to reset i appropriately. Normally,
-# this would be:
-# i += len(ert)
-# That puts us right after the ERT we just inserted.
-#
-def put_cmd_in_ert(arg):
- ret = ["\\begin_inset ERT", "status collapsed", "\\begin_layout Plain Layout", ""]
- # Despite the warnings just given, it will be faster for us to work
- # with a single string internally. That way, we only go through the
- # unicode_reps loop once.
- if type(arg) is list:
- s = "\n".join(arg)
- else:
- s = arg
- for rep in unicode_reps:
- s = s.replace(rep[1], rep[0].replace('\\\\', '\\'))
- s = s.replace('\\', "\\backslash\n")
- ret += s.splitlines()
- ret += ["\\end_layout", "\\end_inset"]
- return ret
-
-
-def lyx2latex(document, lines):
- 'Convert some LyX stuff into corresponding LaTeX stuff, as best we can.'
- # clean up multiline stuff
- content = ""
- ert_end = 0
- note_end = 0
- hspace = ""
-
- for curline in range(len(lines)):
- line = lines[curline]
- if line.startswith("\\begin_inset Note Note"):
- # We want to skip LyX notes, so remember where the inset ends
- note_end = find_end_of_inset(lines, curline + 1)
- continue
- elif note_end >= curline:
- # Skip LyX notes
- continue
- elif line.startswith("\\begin_inset ERT"):
- # We don't want to replace things inside ERT, so figure out
- # where the end of the inset is.
- ert_end = find_end_of_inset(lines, curline + 1)
- continue
- elif line.startswith("\\begin_inset Formula"):
- line = line[20:]
- elif line.startswith("\\begin_inset Quotes"):
- # For now, we do a very basic reversion. Someone who understands
- # quotes is welcome to fix it up.
- qtype = line[20:].strip()
- # lang = qtype[0]
- side = qtype[1]
- dbls = qtype[2]
- if side == "l":
- if dbls == "d":
- line = "``"
- else:
- line = "`"
- else:
- if dbls == "d":
- line = "''"
- else:
- line = "'"
- elif line.startswith("\\begin_inset space"):
- line = line[18:].strip()
- if line.startswith("\\hspace"):
- # Account for both \hspace and \hspace*
- hspace = line[:-2]
- continue
- elif line == "\\space{}":
- line = "\\ "
- elif line == "\\thinspace{}":
- line = "\\,"
- elif hspace != "":
- # The LyX length is in line[8:], after the \length keyword
- # latex_length returns "bool,length"
- length = latex_length(line[8:]).split(",")[1]
- line = hspace + "{" + length + "}"
- hspace = ""
- elif line.isspace() or \
- line.startswith("\\begin_layout") or \
- line.startswith("\\end_layout") or \
- line.startswith("\\begin_inset") or \
- line.startswith("\\end_inset") or \
- line.startswith("\\lang") or \
- line.strip() == "status collapsed" or \
- line.strip() == "status open":
- #skip all that stuff
- continue
-
- # this needs to be added to the preamble because of cases like
- # \textmu, \textbackslash, etc.
- add_to_preamble(document, ['% added by lyx2lyx for converted index entries',
- '\\@ifundefined{textmu}',
- ' {\\usepackage{textcomp}}{}'])
- # a lossless reversion is not possible
- # try at least to handle some common insets and settings
- if ert_end >= curline:
- line = line.replace(r'\backslash', '\\')
- else:
- # No need to add "{}" after single-nonletter macros
- line = line.replace('&', '\\&')
- line = line.replace('#', '\\#')
- line = line.replace('^', '\\textasciicircum{}')
- line = line.replace('%', '\\%')
- line = line.replace('_', '\\_')
- line = line.replace('$', '\\$')
-
- # Do the LyX text --> LaTeX conversion
- for rep in unicode_reps:
- line = line.replace(rep[1], rep[0] + "{}")
- line = line.replace(r'\backslash', r'\textbackslash{}')
- line = line.replace(r'\series bold', r'\bfseries{}').replace(r'\series default', r'\mdseries{}')
- line = line.replace(r'\shape italic', r'\itshape{}').replace(r'\shape smallcaps', r'\scshape{}')
- line = line.replace(r'\shape slanted', r'\slshape{}').replace(r'\shape default', r'\upshape{}')
- line = line.replace(r'\emph on', r'\em{}').replace(r'\emph default', r'\em{}')
- line = line.replace(r'\noun on', r'\scshape{}').replace(r'\noun default', r'\upshape{}')
- line = line.replace(r'\bar under', r'\underbar{').replace(r'\bar default', r'}')
- line = line.replace(r'\family sans', r'\sffamily{}').replace(r'\family default', r'\normalfont{}')
- line = line.replace(r'\family typewriter', r'\ttfamily{}').replace(r'\family roman', r'\rmfamily{}')
- line = line.replace(r'\InsetSpace ', r'').replace(r'\SpecialChar ', r'')
- content += line
- return content
-
-
-def latex_length(string):
- 'Convert lengths to their LaTeX representation.'
- i = 0
- percent = False
- # the string has the form
- # ValueUnit+ValueUnit-ValueUnit or
- # ValueUnit+-ValueUnit
- # the + and - (glue lengths) are optional
- # the + always precedes the -
-
- # Convert relative lengths to LaTeX units
- units = {"text%":"\\textwidth", "col%":"\\columnwidth",
- "page%":"\\paperwidth", "line%":"\\linewidth",
- "theight%":"\\textheight", "pheight%":"\\paperheight"}
- for unit in units.keys():
- i = string.find(unit)
- if i != -1:
- percent = True
- minus = string.rfind("-", 1, i)
- plus = string.rfind("+", 0, i)
- latex_unit = units[unit]
- if plus == -1 and minus == -1:
- value = string[:i]
- value = str(float(value)/100)
- end = string[i + len(unit):]
- string = value + latex_unit + end
- if plus > minus:
- value = string[plus + 1:i]
- value = str(float(value)/100)
- begin = string[:plus + 1]
- end = string[i+len(unit):]
- string = begin + value + latex_unit + end
- if plus < minus:
- value = string[minus + 1:i]
- value = str(float(value)/100)
- begin = string[:minus + 1]
- string = begin + value + latex_unit
-
- # replace + and -, but only if the - is not the first character
- string = string[0] + string[1:].replace("+", " plus ").replace("-", " minus ")
- # handle the case where "+-1mm" was used, because LaTeX only understands
- # "plus 1mm minus 1mm"
- if string.find("plus minus"):
- lastvaluepos = string.rfind(" ")
- lastvalue = string[lastvaluepos:]
- string = string.replace(" ", lastvalue + " ")
- if percent == False:
- return "False," + string
- else:
- return "True," + string
-
-
-def revert_flex_inset(document, name, LaTeXname, position):
- " Convert flex insets to TeX code "
- i = position
- while True:
- i = find_token(document.body, '\\begin_inset Flex ' + name, i)
- if i == -1:
- return
- z = find_end_of_inset(document.body, i)
- if z == -1:
- document.warning("Malformed LyX document: Can't find end of Flex " + name + " inset.")
- return
- # remove the \end_inset
- document.body[z - 2:z + 1] = put_cmd_in_ert("}")
- # we need to reset character layouts if necessary
- j = find_token(document.body, '\\emph on', i)
- k = find_token(document.body, '\\noun on', i)
- l = find_token(document.body, '\\series', i)
- m = find_token(document.body, '\\family', i)
- n = find_token(document.body, '\\shape', i)
- o = find_token(document.body, '\\color', i)
- p = find_token(document.body, '\\size', i)
- q = find_token(document.body, '\\bar under', i)
- r = find_token(document.body, '\\uuline on', i)
- s = find_token(document.body, '\\uwave on', i)
- t = find_token(document.body, '\\strikeout on', i)
- if j != -1 and j < z:
- document.body.insert(z - 2, "\\emph default")
- if k != -1 and k < z:
- document.body.insert(z - 2, "\\noun default")
- if l != -1 and l < z:
- document.body.insert(z - 2, "\\series default")
- if m != -1 and m < z:
- document.body.insert(z - 2, "\\family default")
- if n != -1 and n < z:
- document.body.insert(z - 2, "\\shape default")
- if o != -1 and o < z:
- document.body.insert(z - 2, "\\color inherit")
- if p != -1 and p < z:
- document.body.insert(z - 2, "\\size default")
- if q != -1 and q < z:
- document.body.insert(z - 2, "\\bar default")
- if r != -1 and r < z:
- document.body.insert(z - 2, "\\uuline default")
- if s != -1 and s < z:
- document.body.insert(z - 2, "\\uwave default")
- if t != -1 and t < z:
- document.body.insert(z - 2, "\\strikeout default")
- document.body[i:i + 4] = put_cmd_in_ert(LaTeXname + "{")
- i += 1
-
-
-def revert_charstyles(document, name, LaTeXname, changed):
- " Reverts character styles to TeX code "
- i = 0
- while True:
- i = find_token(document.body, name + ' on', i)
- if i == -1:
- return changed
- j = find_token(document.body, name + ' default', i)
- k = find_token(document.body, name + ' on', i + 1)
- # if there is no default set, the style ends with the layout
- # assure hereby that we found the correct layout end
- if j != -1 and (j < k or k == -1):
- document.body[j:j + 1] = put_cmd_in_ert("}")
- else:
- j = find_token(document.body, '\\end_layout', i)
- document.body[j:j] = put_cmd_in_ert("}")
- document.body[i:i + 1] = put_cmd_in_ert(LaTeXname + "{")
- changed = True
- i += 1
-
-
-def revert_layout_command(document, name, LaTeXname, position):
- " Reverts a command from a layout to TeX code "
- i = position
- while True:
- i = find_token(document.body, '\\begin_layout ' + name, i)
- if i == -1:
- return
- k = -1
- # find the next layout
- j = i + 1
- while k == -1:
- j = find_token(document.body, '\\begin_layout', j)
- l = len(document.body)
- # if nothing was found it was the last layout of the document
- if j == -1:
- document.body[l - 4:l - 4] = put_cmd_in_ert("}")
- k = 0
- # exclude plain layout because this can be TeX code or another inset
- elif document.body[j] != '\\begin_layout Plain Layout':
- document.body[j - 2:j - 2] = put_cmd_in_ert("}")
- k = 0
- else:
- j += 1
- document.body[i] = '\\begin_layout Standard'
- document.body[i + 1:i + 1] = put_cmd_in_ert(LaTeXname + "{")
- i += 1
-
-
-####################################################################
-
+###############################################################################
+###
+### Conversion and reversion routines
+###
+###############################################################################
def revert_swiss(document):
" Set language german-ch to ngerman "
" Revert the tabular valign option "
i = 0
while True:
- i = find_token(document.body, "\\begin_inset Tabular", i)
- if i == -1:
- return
- j = find_token(document.body, "</cell>", i)
- if j == -1:
- document.warning("Malformed LyX document: Could not find end of tabular cell.")
- i = j
- continue
- # don't set a box for longtables, only delete tabularvalignment
- # the alignment is 2 lines below \\begin_inset Tabular
- p = document.body[i + 2].find("islongtable")
- if p > -1:
- q = document.body[i + 2].find("tabularvalignment")
- if q > -1:
- document.body[i + 2] = document.body[i + 2][:q - 1]
- document.body[i + 2] = document.body[i + 2] + '>'
- i = i + 1
-
- # when no longtable
- if p == -1:
- tabularvalignment = 'c'
- # which valignment is specified?
- m = document.body[i + 2].find('tabularvalignment="top"')
- if m > -1:
- tabularvalignment = 't'
- m = document.body[ i+ 2].find('tabularvalignment="bottom"')
- if m > -1:
- tabularvalignment = 'b'
- # delete tabularvalignment
- q = document.body[i + 2].find("tabularvalignment")
- if q > -1:
- document.body[i + 2] = document.body[i + 2][:q - 1]
- document.body[i + 2] = document.body[i + 2] + '>'
-
- # don't add a box when centered
- if tabularvalignment == 'c':
- i = j
- continue
- subst = ['\\end_layout', '\\end_inset']
- document.body[j:j] = subst # just inserts those lines
- subst = ['\\begin_inset Box Frameless',
- 'position "' + tabularvalignment +'"',
- 'hor_pos "c"',
- 'has_inner_box 1',
- 'inner_pos "c"',
- 'use_parbox 0',
- # we don't know the width, assume 50%
- 'width "50col%"',
- 'special "none"',
- 'height "1in"',
- 'height_special "totalheight"',
- 'status open',
- '',
- '\\begin_layout Plain Layout']
- document.body[i:i] = subst # this just inserts the array at i
- i += len(subst) + 2 # adjust i to save a few cycles
+ i = find_token(document.body, "\\begin_inset Tabular", i)
+ if i == -1:
+ return
+ end = find_end_of_inset(document.body, i)
+ if end == -1:
+ document.warning("Can't find end of inset at line " + str(i))
+ i += 1
+ continue
+ fline = find_token(document.body, "<features", i, end)
+ if fline == -1:
+ document.warning("Can't find features for inset at line " + str(i))
+ i += 1
+ continue
+ p = document.body[fline].find("islongtable")
+ if p != -1:
+ q = document.body[fline].find("tabularvalignment")
+ if q != -1:
+ # FIXME
+ # This seems wrong: It removes everything after
+ # tabularvalignment, too.
+ document.body[fline] = document.body[fline][:q - 1] + '>'
+ i += 1
+ continue
+
+ # no longtable
+ tabularvalignment = 'c'
+ # which valignment is specified?
+ m = document.body[fline].find('tabularvalignment="top"')
+ if m != -1:
+ tabularvalignment = 't'
+ m = document.body[fline].find('tabularvalignment="bottom"')
+ if m != -1:
+ tabularvalignment = 'b'
+ # delete tabularvalignment
+ q = document.body[fline].find("tabularvalignment")
+ if q != -1:
+ # FIXME
+ # This seems wrong: It removes everything after
+ # tabularvalignment, too.
+ document.body[fline] = document.body[fline][:q - 1] + '>'
+
+ # don't add a box when centered
+ if tabularvalignment == 'c':
+ i = end
+ continue
+ subst = ['\\end_layout', '\\end_inset']
+ document.body[end:end] = subst # just inserts those lines
+ subst = ['\\begin_inset Box Frameless',
+ 'position "' + tabularvalignment +'"',
+ 'hor_pos "c"',
+ 'has_inner_box 1',
+ 'inner_pos "c"',
+ 'use_parbox 0',
+ # we don't know the width, assume 50%
+ 'width "50col%"',
+ 'special "none"',
+ 'height "1in"',
+ 'height_special "totalheight"',
+ 'status open',
+ '',
+ '\\begin_layout Plain Layout']
+ document.body[i:i] = subst # this just inserts the array at i
+ # since there could be a tabular inside a tabular, we cannot
+ # jump to end
+ i += len(subst)
-def revert_phantom(document):
+def revert_phantom_types(document, ptype, cmd):
" Reverts phantom to ERT "
i = 0
- j = 0
while True:
- i = find_token(document.body, "\\begin_inset Phantom Phantom", i)
+ i = find_token(document.body, "\\begin_inset Phantom " + ptype, i)
if i == -1:
return
- substi = document.body[i].replace('\\begin_inset Phantom Phantom', \
- '\\begin_inset ERT\nstatus collapsed\n\n' \
- '\\begin_layout Plain Layout\n\n\n\\backslash\n' \
- 'phantom{\n\\end_layout\n\n\\end_inset\n')
- substi = substi.split('\n')
- document.body[i:i + 4] = substi
- i += len(substi)
- j = find_token(document.body, "\\end_layout", i)
- if j == -1:
- document.warning("Malformed LyX document: Could not find end of Phantom inset.")
- return
- substj = document.body[j].replace('\\end_layout', \
- '\\size default\n\n\\begin_inset ERT\nstatus collapsed\n\n' \
- '\\begin_layout Plain Layout\n\n' \
- '}\n\\end_layout\n\n\\end_inset\n')
- substj = substj.split('\n')
- document.body[j:j + 4] = substj
- i += len(substj)
+ end = find_end_of_inset(document.body, i)
+ if end == -1:
+ document.warning("Can't find end of inset at line " + str(i))
+ i += 1
+ continue
+ blay = find_token(document.body, "\\begin_layout Plain Layout", i, end)
+ if blay == -1:
+ document.warning("Can't find layout for inset at line " + str(i))
+ i = end
+ continue
+ bend = find_token(document.body, "\\end_layout", blay, end)
+ if bend == -1:
+ document.warning("Malformed LyX document: Could not find end of Phantom inset's layout.")
+ i = end
+ continue
+ substi = ["\\begin_inset ERT", "status collapsed", "",
+ "\\begin_layout Plain Layout", "", "", "\\backslash",
+ cmd + "{", "\\end_layout", "", "\\end_inset"]
+ substj = ["\\size default", "", "\\begin_inset ERT", "status collapsed", "",
+ "\\begin_layout Plain Layout", "", "}", "\\end_layout", "", "\\end_inset"]
+ # do the later one first so as not to mess up the numbering
+ document.body[bend:end + 1] = substj
+ document.body[i:blay + 1] = substi
+ i = end + len(substi) + len(substj) - (end - bend) - (blay - i) - 2
+def revert_phantom(document):
+ revert_phantom_types(document, "Phantom", "phantom")
+
def revert_hphantom(document):
- " Reverts hphantom to ERT "
- i = 0
- j = 0
- while True:
- i = find_token(document.body, "\\begin_inset Phantom HPhantom", i)
- if i == -1:
- return
- substi = document.body[i].replace('\\begin_inset Phantom HPhantom', \
- '\\begin_inset ERT\nstatus collapsed\n\n' \
- '\\begin_layout Plain Layout\n\n\n\\backslash\n' \
- 'hphantom{\n\\end_layout\n\n\\end_inset\n')
- substi = substi.split('\n')
- document.body[i:i + 4] = substi
- i += len(substi)
- j = find_token(document.body, "\\end_layout", i)
- if j == -1:
- document.warning("Malformed LyX document: Could not find end of HPhantom inset.")
- return
- substj = document.body[j].replace('\\end_layout', \
- '\\size default\n\n\\begin_inset ERT\nstatus collapsed\n\n' \
- '\\begin_layout Plain Layout\n\n' \
- '}\n\\end_layout\n\n\\end_inset\n')
- substj = substj.split('\n')
- document.body[j:j + 4] = substj
- i += len(substj)
-
+ revert_phantom_types(document, "HPhantom", "hphantom")
def revert_vphantom(document):
- " Reverts vphantom to ERT "
- i = 0
- j = 0
- while True:
- i = find_token(document.body, "\\begin_inset Phantom VPhantom", i)
- if i == -1:
- return
- substi = document.body[i].replace('\\begin_inset Phantom VPhantom', \
- '\\begin_inset ERT\nstatus collapsed\n\n' \
- '\\begin_layout Plain Layout\n\n\n\\backslash\n' \
- 'vphantom{\n\\end_layout\n\n\\end_inset\n')
- substi = substi.split('\n')
- document.body[i:i + 4] = substi
- i += len(substi)
- j = find_token(document.body, "\\end_layout", i)
- if j == -1:
- document.warning("Malformed LyX document: Could not find end of VPhantom inset.")
- return
- substj = document.body[j].replace('\\end_layout', \
- '\\size default\n\n\\begin_inset ERT\nstatus collapsed\n\n' \
- '\\begin_layout Plain Layout\n\n' \
- '}\n\\end_layout\n\n\\end_inset\n')
- substj = substj.split('\n')
- document.body[j:j + 4] = substj
- i += len(substj)
+ revert_phantom_types(document, "VPhantom", "vphantom")
def revert_xetex(document):
def revert_backgroundcolor(document):
" Reverts background color to preamble code "
- i = 0
- colorcode = ""
- while True:
- i = find_token(document.header, "\\backgroundcolor", i)
- if i == -1:
- return
- colorcode = get_value(document.header, '\\backgroundcolor', 0)
- del document.header[i]
- # don't clutter the preamble if backgroundcolor is not set
- if colorcode == "#ffffff":
- continue
- # the color code is in the form #rrggbb where every character denotes a hex number
- # convert the string to an int
- red = string.atoi(colorcode[1:3],16)
- # we want the output "0.5" for the value "127" therefore add here
- if red != 0:
- red = red + 1
- redout = float(red) / 256
- green = string.atoi(colorcode[3:5],16)
- if green != 0:
- green = green + 1
- greenout = float(green) / 256
- blue = string.atoi(colorcode[5:7],16)
- if blue != 0:
- blue = blue + 1
- blueout = float(blue) / 256
- # write the preamble
- insert_to_preamble(0, document,
- '% Commands inserted by lyx2lyx to set the background color\n'
- + '\\@ifundefined{definecolor}{\\usepackage{color}}{}\n'
- + '\\definecolor{page_backgroundcolor}{rgb}{'
- + str(redout) + ', ' + str(greenout)
- + ', ' + str(blueout) + '}\n'
- + '\\pagecolor{page_backgroundcolor}\n')
+ i = find_token(document.header, "\\backgroundcolor", 0)
+ if i == -1:
+ return
+ colorcode = get_value(document.header, '\\backgroundcolor', i)
+ del document.header[i]
+ # don't clutter the preamble if backgroundcolor is not set
+ if colorcode == "#ffffff":
+ return
+ red = hex2ratio(colorcode[1:3])
+ green = hex2ratio(colorcode[3:5])
+ blue = hex2ratio(colorcode[5:7])
+ insert_to_preamble(0, document,
+ '% Commands inserted by lyx2lyx to set the background color\n'
+ + '\\@ifundefined{definecolor}{\\usepackage{color}}{}\n'
+ + '\\definecolor{page_backgroundcolor}{rgb}{'
+ + red + ',' + green + ',' + blue + '}\n'
+ + '\\pagecolor{page_backgroundcolor}\n')
def revert_splitindex(document):
return
indices = get_value(document.header, "\\use_indices", i)
preamble = ""
- if indices == "true":
+ useindices = (indices == "true")
+ if useindices:
preamble += "\\usepackage{splitidx}\n"
del document.header[i]
+
+ # deal with index declarations in the preamble
i = 0
while True:
i = find_token(document.header, "\\index", i)
if k == -1:
document.warning("Malformed LyX document: Missing \\end_index.")
return
- line = document.header[i]
- l = re.compile(r'\\index (.*)$')
- m = l.match(line)
- iname = m.group(1)
- ishortcut = get_value(document.header, '\\shortcut', i, k)
- if ishortcut != "" and indices == "true":
- preamble += "\\newindex[" + iname + "]{" + ishortcut + "}\n"
+ if useindices:
+ line = document.header[i]
+ l = re.compile(r'\\index (.*)$')
+ m = l.match(line)
+ iname = m.group(1)
+ ishortcut = get_value(document.header, '\\shortcut', i, k)
+ if ishortcut != "":
+ preamble += "\\newindex[" + iname + "]{" + ishortcut + "}\n"
del document.header[i:k + 1]
- i = 0
if preamble != "":
insert_to_preamble(0, document, preamble)
+
+ # deal with index insets
+ # these need to have the argument removed
i = 0
while True:
i = find_token(document.body, "\\begin_inset Index", i)
else:
k = find_end_of_inset(document.body, i)
if k == -1:
- return
+ document.warning("Can't find end of index inset!")
+ i += 1
+ continue
content = lyx2latex(document, document.body[i:k])
# escape quotes
content = content.replace('"', r'\"')
- subst = [old_put_cmd_in_ert("\\sindex[" + itype + "]{" + content + "}")]
+ subst = put_cmd_in_ert("\\sindex[" + itype + "]{" + content + "}")
document.body[i:k + 1] = subst
i = i + 1
+
+ # deal with index_print insets
i = 0
while True:
i = find_token(document.body, "\\begin_inset CommandInset index_print", i)
if ptype == "idx":
j = find_token(document.body, "type", i, k)
del document.body[j]
- elif indices == "false":
+ elif not useindices:
del document.body[i:k + 1]
else:
- subst = [old_put_cmd_in_ert("\\printindex[" + ptype + "]{}")]
+ subst = put_cmd_in_ert("\\printindex[" + ptype + "]{}")
document.body[i:k + 1] = subst
i = i + 1
document.warning("Malformed LyX document: Missing \\use_indices.")
return
indices = get_value(document.header, "\\use_indices", i)
+ useindices = (indices == "true")
i = 0
while True:
i = find_token(document.body, "\\begin_inset CommandInset index_print", i)
k = find_end_of_inset(document.body, i)
ctype = get_value(document.body, 'LatexCommand', i, k)
if ctype != "printsubindex":
- i = i + 1
+ i = k + 1
continue
ptype = get_value(document.body, 'type', i, k).strip('"')
- if indices == "false":
+ if not useindices:
del document.body[i:k + 1]
else:
- subst = [old_put_cmd_in_ert("\\printsubindex[" + ptype + "]{}")]
+ subst = put_cmd_in_ert("\\printsubindex[" + ptype + "]{}")
document.body[i:k + 1] = subst
i = i + 1
document.warning("Malformed LyX document: Missing \\use_indices.")
return
indices = get_value(document.header, "\\use_indices", i)
+ useindices = (indices == "true")
i = 0
while True:
i = find_token(document.body, "\\begin_inset CommandInset index_print", i)
k = find_end_of_inset(document.body, i)
ctype = get_value(document.body, 'LatexCommand', i, k)
if ctype != "printindex*" and ctype != "printsubindex*":
- i = i + 1
+ i = k
continue
- if indices == "false":
+ if not useindices:
del document.body[i:k + 1]
else:
- subst = [old_put_cmd_in_ert("\\" + ctype + "{}")]
+ subst = put_cmd_in_ert("\\" + ctype + "{}")
document.body[i:k + 1] = subst
i = i + 1
def revert_strikeout(document):
- " Reverts \\strikeout character style "
- changed = False
- changed = revert_charstyles(document, "\\uuline", "\\uuline", changed)
- changed = revert_charstyles(document, "\\uwave", "\\uwave", changed)
- changed = revert_charstyles(document, "\\strikeout", "\\sout", changed)
+ " Reverts \\strikeout font attribute "
+ changed = revert_font_attrs(document, "\\uuline", "\\uuline")
+ changed = revert_font_attrs(document, "\\uwave", "\\uwave") or changed
+ changed = revert_font_attrs(document, "\\strikeout", "\\sout") or changed
if changed == True:
insert_to_preamble(0, document,
'% Commands inserted by lyx2lyx for proper underlining\n'
def revert_ulinelatex(document):
- " Reverts \\uline character style "
+ " Reverts \\uline font attribute "
i = find_token(document.body, '\\bar under', 0)
if i == -1:
return
i = find_token(document.header, '\\bibtex_command', 0)
if i == -1:
document.warning("Malformed LyX document: Missing \\bibtex_command.")
- return
- del document.header[i]
+ else:
+ del document.header[i]
i = find_token(document.header, '\\index_command', 0)
if i == -1:
document.warning("Malformed LyX document: Missing \\index_command.")
- return
- del document.header[i]
+ else:
+ del document.header[i]
def convert_nomencl_width(document):
i = j
continue
del document.body[l]
- i = i + 1
+ i = j - 1
def revert_nomencl_cwidth(document):
j = find_end_of_inset(document.body, i)
l = find_token(document.body, "width", i, j)
if l == -1:
- #Can't find width option for nomencl_print
- i = j
- continue
+ document.warning("Can't find width option for nomencl_print!")
+ i = j
+ continue
width = get_value(document.body, "width", i, j).strip('"')
del document.body[l]
add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
add_to_preamble(document, ["\\setlength{\\nomlabelwidth}{" + width + "}"])
- i = i + 1
+ i = j - 1
def revert_applemac(document):
" Revert applemac encoding to auto "
- i = 0
- if document.encoding == "applemac":
- document.encoding = "auto"
- i = find_token(document.header, "\\encoding", 0)
- if i != -1:
- document.header[i] = "\\encoding auto"
+ if document.encoding != "applemac":
+ return
+ document.encoding = "auto"
+ i = find_token(document.header, "\\encoding", 0)
+ if i != -1:
+ document.header[i] = "\\encoding auto"
def revert_longtable_align(document):
" Remove longtable alignment setting "
i = 0
- j = 0
while True:
i = find_token(document.body, "\\begin_inset Tabular", i)
if i == -1:
break
- # the alignment is 2 lines below \\begin_inset Tabular
- j = document.body[i + 2].find("longtabularalignment")
+ end = find_end_of_inset(document.body, i)
+ if end == -1:
+ document.warning("Can't find end of inset at line " + str(i))
+ i += 1
+ continue
+ fline = find_token(document.body, "<features", i, end)
+ if fline == -1:
+ document.warning("Can't find features for inset at line " + str(i))
+ i += 1
+ continue
+ j = document.body[fline].find("longtabularalignment")
if j == -1:
- break
- document.body[i + 2] = document.body[i + 2][:j - 1]
- document.body[i + 2] = document.body[i + 2] + '>'
- i = i + 1
+ i += 1
+ continue
+ # FIXME Is this correct? It wipes out everything after the
+ # one we found.
+ document.body[fline] = document.body[fline][:j - 1] + '>'
+ # since there could be a tabular inside this one, we
+ # cannot jump to end.
+ i += 1
def revert_branch_filename(document):
def revert_paragraph_indentation(document):
" Revert custom paragraph indentation to preamble code "
- i = 0
- while True:
- i = find_token(document.header, "\\paragraph_indentation", i)
- if i == -1:
- break
- # only remove the preamble line if default
- # otherwise also write the value to the preamble
- length = get_value(document.header, "\\paragraph_indentation", i)
- if length == "default":
- del document.header[i]
- break
- else:
- # handle percent lengths
- # latex_length returns "bool,length"
- length = latex_length(length).split(",")[1]
- add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
- add_to_preamble(document, ["\\setlength{\\parindent}{" + length + "}"])
- del document.header[i]
- i = i + 1
+ i = find_token(document.header, "\\paragraph_indentation", 0)
+ if i == -1:
+ return
+ length = get_value(document.header, "\\paragraph_indentation", i)
+ # we need only remove the line if indentation is default
+ if length != "default":
+ # handle percent lengths
+ length = latex_length(length)[1]
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, ["\\setlength{\\parindent}{" + length + "}"])
+ del document.header[i]
def revert_percent_skip_lengths(document):
" Revert relative lengths for paragraph skip separation to preamble code "
- i = 0
- while True:
- i = find_token(document.header, "\\defskip", i)
- if i == -1:
- break
- length = get_value(document.header, "\\defskip", i)
- # only revert when a custom length was set and when
- # it used a percent length
- if length not in ('smallskip', 'medskip', 'bigskip'):
- # handle percent lengths
- length = latex_length(length)
- # latex_length returns "bool,length"
- percent = length.split(",")[0]
- length = length.split(",")[1]
- if percent == "True":
- add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
- add_to_preamble(document, ["\\setlength{\\parskip}{" + length + "}"])
- # set defskip to medskip as default
- document.header[i] = "\\defskip medskip"
- i = i + 1
+ i = find_token(document.header, "\\defskip", 0)
+ if i == -1:
+ return
+ length = get_value(document.header, "\\defskip", i)
+ # only revert when a custom length was set and when
+ # it used a percent length
+ if length in ('smallskip', 'medskip', 'bigskip'):
+ return
+ # handle percent lengths
+ percent, length = latex_length(length)
+ if percent:
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, ["\\setlength{\\parskip}{" + length + "}"])
+ # set defskip to medskip as default
+ document.header[i] = "\\defskip medskip"
def revert_percent_vspace_lengths(document):
break
# only revert if a custom length was set and if
# it used a percent length
- line = document.body[i]
r = re.compile(r'\\begin_inset VSpace (.*)$')
- m = r.match(line)
+ m = r.match(document.body[i])
length = m.group(1)
- if length not in ('defskip', 'smallskip', 'medskip', 'bigskip', 'vfill'):
- # check if the space has a star (protected space)
- protected = (document.body[i].rfind("*") != -1)
+ if length in ('defskip', 'smallskip', 'medskip', 'bigskip', 'vfill'):
+ i += 1
+ continue
+ # check if the space has a star (protected space)
+ protected = (document.body[i].rfind("*") != -1)
+ if protected:
+ length = length.rstrip('*')
+ # handle percent lengths
+ percent, length = latex_length(length)
+ # revert the VSpace inset to ERT
+ if percent:
if protected:
- length = length.rstrip('*')
- # handle percent lengths
- length = latex_length(length)
- # latex_length returns "bool,length"
- percent = length.split(",")[0]
- length = length.split(",")[1]
- # revert the VSpace inset to ERT
- if percent == "True":
- if protected:
- subst = [old_put_cmd_in_ert("\\vspace*{" + length + "}")]
- else:
- subst = [old_put_cmd_in_ert("\\vspace{" + length + "}")]
- document.body[i:i + 2] = subst
- i = i + 1
+ subst = put_cmd_in_ert("\\vspace*{" + length + "}")
+ else:
+ subst = put_cmd_in_ert("\\vspace{" + length + "}")
+ document.body[i:i + 2] = subst
+ i += 1
def revert_percent_hspace_lengths(document):
i = find_token(document.body, "\\begin_inset space \\hspace", i)
if i == -1:
break
- protected = (document.body[i].find("\\hspace*{}") != -1)
- # only revert if a custom length was set and if
- # it used a percent length
- length = get_value(document.body, '\\length', i + 1)
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Can't find end of inset at line " + str(i))
+ i += 1
+ continue
+ # only revert if a custom length was set...
+ length = get_value(document.body, '\\length', i + 1, j)
if length == '':
document.warning("Malformed lyx document: Missing '\\length' in Space inset.")
- return
- # handle percent lengths
- length = latex_length(length)
- # latex_length returns "bool,length"
- percent = length.split(",")[0]
- length = length.split(",")[1]
+ i = j
+ continue
+ protected = ""
+ if document.body[i].find("\\hspace*{}") != -1:
+ protected = "*"
+ # ...and if it used a percent length
+ percent, length = latex_length(length)
# revert the HSpace inset to ERT
- if percent == "True":
- if protected:
- subst = [old_put_cmd_in_ert("\\hspace*{" + length + "}")]
- else:
- subst = [old_put_cmd_in_ert("\\hspace{" + length + "}")]
- document.body[i:i + 3] = subst
- i = i + 2
+ if percent:
+ subst = put_cmd_in_ert("\\hspace" + protected + "{" + length + "}")
+ document.body[i:j + 1] = subst
+ # if we did a substitution, this will still be ok
+ i = j
def revert_hspace_glue_lengths(document):
i = find_token(document.body, "\\begin_inset space \\hspace", i)
if i == -1:
break
- protected = (document.body[i].find("\\hspace*{}") != -1)
- length = get_value(document.body, '\\length', i + 1)
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Can't find end of inset at line " + str(i))
+ i += 1
+ continue
+ length = get_value(document.body, '\\length', i + 1, j)
if length == '':
document.warning("Malformed lyx document: Missing '\\length' in Space inset.")
- return
+ i = j
+ continue
+ protected = ""
+ if document.body[i].find("\\hspace*{}") != -1:
+ protected = "*"
# only revert if the length contains a plus or minus at pos != 0
- glue = re.compile(r'.+[\+-]')
- if glue.search(length):
+ if length.find('-',1) != -1 or length.find('+',1) != -1:
# handle percent lengths
- # latex_length returns "bool,length"
- length = latex_length(length).split(",")[1]
+ length = latex_length(length)[1]
# revert the HSpace inset to ERT
- if protected:
- subst = [old_put_cmd_in_ert("\\hspace*{" + length + "}")]
- else:
- subst = [old_put_cmd_in_ert("\\hspace{" + length + "}")]
- document.body[i:i + 3] = subst
- i = i + 2
+ subst = put_cmd_in_ert("\\hspace" + protected + "{" + length + "}")
+ document.body[i:j+1] = subst
+ i = j
+
def convert_author_id(document):
" Add the author_id to the \\author definition and make sure 0 is not used"
i = 0
- j = 1
+ anum = 1
+ re_author = re.compile(r'(\\author) (\".*\")\s*(.*)$')
+
while True:
i = find_token(document.header, "\\author", i)
if i == -1:
break
-
- r = re.compile(r'(\\author) (\".*\")\s?(.*)$')
- m = r.match(document.header[i])
- if m != None:
+ m = re_author.match(document.header[i])
+ if m:
name = m.group(2)
-
- email = ''
- if m.lastindex == 3:
- email = m.group(3)
- document.header[i] = "\\author %i %s %s" % (j, name, email)
- j = j + 1
- i = i + 1
+ email = m.group(3)
+ document.header[i] = "\\author %i %s %s" % (anum, name, email)
+ # FIXME Should this really be incremented if we didn't match?
+ anum += 1
+ i += 1
- k = 0
+ i = 0
while True:
- k = find_token(document.body, "\\change_", k)
- if k == -1:
+ i = find_token(document.body, "\\change_", i)
+ if i == -1:
break
-
- change = document.body[k].split(' ');
+ change = document.body[i].split(' ');
if len(change) == 3:
type = change[0]
author_id = int(change[1])
time = change[2]
- document.body[k] = "%s %i %s" % (type, author_id + 1, time)
- k = k + 1
+ document.body[i] = "%s %i %s" % (type, author_id + 1, time)
+ i += 1
+
def revert_author_id(document):
" Remove the author_id from the \\author definition "
i = 0
- j = 0
+ anum = 0
+ rx = re.compile(r'(\\author)\s+(\d+)\s+(\".*\")\s*(.*)$')
idmap = dict()
+
while True:
i = find_token(document.header, "\\author", i)
if i == -1:
break
-
- r = re.compile(r'(\\author) (\d+) (\".*\")\s?(.*)$')
- m = r.match(document.header[i])
- if m != None:
+ m = rx.match(document.header[i])
+ if m:
author_id = int(m.group(2))
- idmap[author_id] = j
+ idmap[author_id] = anum
name = m.group(3)
-
- email = ''
- if m.lastindex == 4:
- email = m.group(4)
+ email = m.group(4)
document.header[i] = "\\author %s %s" % (name, email)
- i = i + 1
- j = j + 1
+ i += 1
+ # FIXME Should this be incremented if we didn't match?
+ anum += 1
- k = 0
+ i = 0
while True:
- k = find_token(document.body, "\\change_", k)
- if k == -1:
+ i = find_token(document.body, "\\change_", i)
+ if i == -1:
break
-
- change = document.body[k].split(' ');
+ change = document.body[i].split(' ');
if len(change) == 3:
type = change[0]
author_id = int(change[1])
time = change[2]
- document.body[k] = "%s %i %s" % (type, idmap[author_id], time)
- k = k + 1
+ document.body[i] = "%s %i %s" % (type, idmap[author_id], time)
+ i += 1
def revert_suppress_date(document):
" Revert suppressing of default document date to preamble code "
- i = 0
- while True:
- i = find_token(document.header, "\\suppress_date", i)
- if i == -1:
- break
- # remove the preamble line and write to the preamble
- # when suppress_date was true
- date = get_value(document.header, "\\suppress_date", i)
- if date == "true":
- add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
- add_to_preamble(document, ["\\date{}"])
- del document.header[i]
- i = i + 1
+ i = find_token(document.header, "\\suppress_date", 0)
+ if i == -1:
+ return
+ # remove the preamble line and write to the preamble
+ # when suppress_date was true
+ date = get_value(document.header, "\\suppress_date", i)
+ if date == "true":
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, ["\\date{}"])
+ del document.header[i]
def revert_mhchem(document):
"Revert mhchem loading to preamble code"
- i = 0
- j = 0
- k = 0
+
mhchem = "off"
- i = find_token(document.header, "\\use_mhchem 1", 0)
- if i != -1:
+ i = find_token(document.header, "\\use_mhchem", 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Could not find mhchem setting.")
mhchem = "auto"
else:
- i = find_token(document.header, "\\use_mhchem 2", 0)
- if i != -1:
+ val = get_value(document.header, "\\use_mhchem", i)
+ if val == "1":
+ mhchem = "auto"
+ elif val == "2":
mhchem = "on"
+ del document.header[i]
+
if mhchem == "auto":
- j = find_token(document.body, "\\cf{", 0)
- if j != -1:
- mhchem = "on"
- else:
- j = find_token(document.body, "\\ce{", 0)
- if j != -1:
- mhchem = "on"
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset Formula", i)
+ if i == -1:
+ break
+ line = document.body[i]
+ if line.find("\\ce{") != -1 or line.find("\\cf{") != 1:
+ mhchem = "on"
+ break
+ i += 1
+
if mhchem == "on":
- add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
- add_to_preamble(document, ["\\PassOptionsToPackage{version=3}{mhchem}"])
- add_to_preamble(document, ["\\usepackage{mhchem}"])
- k = find_token(document.header, "\\use_mhchem", 0)
- if k == -1:
- document.warning("Malformed LyX document: Could not find mhchem setting.")
- return
- del document.header[k]
+ pre = ["% lyx2lyx mhchem commands",
+ "\\PassOptionsToPackage{version=3}{mhchem}",
+ "\\usepackage{mhchem}"]
+ add_to_preamble(document, pre)
def revert_fontenc(document):
return
j = find_end_of(document.header, i, "\\begin_includeonly", "\\end_includeonly")
if j == -1:
- # this should not happen
+ document.warning("Unable to find end of includeonly section!!")
break
document.header[i : j + 1] = []
def revert_multirow(document):
- " Revert multirow cells in tables "
+ " Revert multirow cells in tables to TeX-code"
i = 0
multirow = False
while True:
multirow = True
# remove the multirow tag, set the valignment to top
# and remove the bottom line
+ # FIXME Are we sure these always have space around them?
document.body[i] = document.body[i].replace(' multirow="3" ', ' ')
document.body[i] = document.body[i].replace('valignment="middle"', 'valignment="top"')
document.body[i] = document.body[i].replace(' bottomline="true" ', ' ')
# write ERT to create the multirow cell
# use 2 rows and 2cm as default with because the multirow span
# and the column width is only hardly accessible
- subst = [old_put_cmd_in_ert("\\multirow{2}{2cm}{")]
- document.body[i + 4:i + 4] = subst
- i = find_token(document.body, "</cell>", i)
- if i == -1:
- document.warning("Malformed LyX document: Could not find end of tabular cell.")
- break
- subst = [old_put_cmd_in_ert("}")]
- document.body[i - 3:i - 3] = subst
- # cell type 4 is multirow part cell
- i = find_token(document.body, '<cell multirow="4"', i)
- if i == -1:
- break
- # remove the multirow tag, set the valignment to top
- # and remove the top line
- document.body[i] = document.body[i].replace(' multirow="4" ', ' ')
- document.body[i] = document.body[i].replace('valignment="middle"', 'valignment="top"')
- document.body[i] = document.body[i].replace(' topline="true" ', ' ')
- i = i + 1
+ cend = find_token(document.body, "</cell>", i)
+ if cend == -1:
+ document.warning("Malformed LyX document: Could not find end of tabular cell.")
+ i += 1
+ continue
+ blay = find_token(document.body, "\\begin_layout", i, cend)
+ if blay == -1:
+ document.warning("Can't find layout for cell!")
+ i = j
+ continue
+ bend = find_end_of_layout(document.body, blay)
+ if blay == -1:
+ document.warning("Can't find end of layout for cell!")
+ i = cend
+ continue
+
+ # do the later one first, so as not to mess up the numbering
+ # we are wrapping the whole cell in this ert
+ # so before the end of the layout...
+ document.body[bend:bend] = put_cmd_in_ert("}")
+ # ...and after the beginning
+ document.body[blay+1:blay+1] = put_cmd_in_ert("\\multirow{2}{2cm}{")
+
+ while True:
+ # cell type 4 is multirow part cell
+ k = find_token(document.body, '<cell multirow="4"', cend)
+ if k == -1:
+ break
+ # remove the multirow tag, set the valignment to top
+ # and remove the top line
+ # FIXME Are we sure these always have space around them?
+ document.body[k] = document.body[k].replace(' multirow="4" ', ' ')
+ document.body[k] = document.body[k].replace('valignment="middle"', 'valignment="top"')
+ document.body[k] = document.body[k].replace(' topline="true" ', ' ')
+ k += 1
+ # this will always be ok
+ i = cend
+
if multirow == True:
- add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
- add_to_preamble(document, ["\\usepackage{multirow}"])
+ add_to_preamble(document,
+ ["% lyx2lyx multirow additions ", "\\usepackage{multirow}"])
def convert_math_output(document):
return
rgx = re.compile(r'\\html_use_mathml\s+(\w+)')
m = rgx.match(document.header[i])
- if rgx:
- newval = "0" # MathML
- val = m.group(1)
- if val != "true":
- newval = "2" # Images
- document.header[i] = "\\html_math_output " + newval
+ newval = "0" # MathML
+ if m:
+ val = m.group(1)
+ if val != "true":
+ newval = "2" # Images
+ else:
+ document.warning("Can't match " + document.header[i])
+ document.header[i] = "\\html_math_output " + newval
def revert_math_output(document):
rgx = re.compile(r'\\html_math_output\s+(\d)')
m = rgx.match(document.header[i])
newval = "true"
- if rgx:
+ if m:
val = m.group(1)
if val == "1" or val == "2":
newval = "false"
def revert_inset_preview(document):
" Dissolves the preview inset "
i = 0
- j = 0
- k = 0
while True:
i = find_token(document.body, "\\begin_inset Preview", i)
if i == -1:
return
- j = find_end_of_inset(document.body, i)
- if j == -1:
+ iend = find_end_of_inset(document.body, i)
+ if iend == -1:
document.warning("Malformed LyX document: Could not find end of Preview inset.")
- return
- #If the layout is Standard we need to remove it, otherwise there
- #will be paragraph breaks that shouldn't be there.
- k = find_token(document.body, "\\begin_layout Standard", i)
- if k == i + 2:
- del document.body[i:i + 3]
- del document.body[j - 5:j - 2]
- i -= 6
- else:
+ i += 1
+ continue
+
+ # This has several issues.
+ # We need to do something about the layouts inside InsetPreview.
+ # If we just leave the first one, then we have something like:
+ # \begin_layout Standard
+ # ...
+ # \begin_layout Standard
+ # and we get a "no \end_layout" error. So something has to be done.
+ # Ideally, we would check if it is the same as the layout we are in.
+ # If so, we just remove it; if not, we end the active one. But it is
+ # not easy to know what layout we are in, due to depth changes, etc,
+ # and it is not clear to me how much work it is worth doing. In most
+ # cases, the layout will probably be the same.
+ #
+ # For the same reason, we have to remove the \end_layout tag at the
+ # end of the last layout in the inset. Again, that will sometimes be
+ # wrong, but it will usually be right. To know what to do, we would
+ # again have to know what layout the inset is in.
+
+ blay = find_token(document.body, "\\begin_layout", i, iend)
+ if blay == -1:
+ document.warning("Can't find layout for preview inset!")
+ # always do the later one first...
+ del document.body[iend]
+ del document.body[i]
+ # deletions mean we do not need to reset i
+ continue
+
+ # This is where we would check what layout we are in.
+ # The check for Standard is definitely wrong.
+ #
+ # lay = document.body[blay].split(None, 1)[1]
+ # if lay != oldlayout:
+ # # record a boolean to tell us what to do later....
+ # # better to do it later, since (a) it won't mess up
+ # # the numbering and (b) we only modify at the end.
+
+ # we want to delete the last \\end_layout in this inset, too.
+ # note that this may not be the \\end_layout that goes with blay!!
+ bend = find_end_of_layout(document.body, blay)
+ while True:
+ tmp = find_token(document.body, "\\end_layout", bend + 1, iend)
+ if tmp == -1:
+ break
+ bend = tmp
+ if bend == blay:
+ document.warning("Unable to find last layout in preview inset!")
+ del document.body[iend]
del document.body[i]
- del document.body[j - 1]
- i -= 2
+ # deletions mean we do not need to reset i
+ continue
+ # always do the later one first...
+ del document.body[iend]
+ del document.body[bend]
+ del document.body[i:blay + 1]
+ # we do not need to reset i
def revert_equalspacing_xymatrix(document):
" Revert a Formula with xymatrix@! to an ERT inset "
i = 0
- j = 0
has_preamble = False
has_equal_spacing = False
+
while True:
- found = -1
i = find_token(document.body, "\\begin_inset Formula", i)
if i == -1:
break
j = find_end_of_inset(document.body, i)
if j == -1:
document.warning("Malformed LyX document: Could not find end of Formula inset.")
- break
-
+ i += 1
+ continue
+
for curline in range(i,j):
found = document.body[curline].find("\\xymatrix@!")
if found != -1:
content += document.body[i + 1:j]
subst = put_cmd_in_ert(content)
document.body[i:j + 1] = subst
- i += len(subst)
+ i += len(subst) - (j - i) + 1
else:
for curline in range(i,j):
l = document.body[curline].find("\\xymatrix")
has_preamble = True;
break;
i = j + 1
+
if has_equal_spacing and not has_preamble:
- add_to_preamble(document, ['\\usepackage[all]{xy}'])
+ add_to_preamble(document, ['% lyx2lyx xymatrix addition', '\\usepackage[all]{xy}'])
def revert_notefontcolor(document):
" Reverts greyed-out note font color to preamble code "
- i = 0
- colorcode = ""
- while True:
- i = find_token(document.header, "\\notefontcolor", i)
- if i == -1:
- return
- colorcode = get_value(document.header, '\\notefontcolor', 0)
- del document.header[i]
- # the color code is in the form #rrggbb where every character denotes a hex number
- # convert the string to an int
- red = string.atoi(colorcode[1:3],16)
- # we want the output "0.5" for the value "127" therefore increment here
- if red != 0:
- red = red + 1
- redout = float(red) / 256
- green = string.atoi(colorcode[3:5],16)
- if green != 0:
- green = green + 1
- greenout = float(green) / 256
- blue = string.atoi(colorcode[5:7],16)
- if blue != 0:
- blue = blue + 1
- blueout = float(blue) / 256
- # write the preamble
- insert_to_preamble(0, document,
- '% Commands inserted by lyx2lyx to set the font color\n'
- '% for greyed-out notes\n'
- + '\\@ifundefined{definecolor}{\\usepackage{color}}{}\n'
- + '\\definecolor{note_fontcolor}{rgb}{'
- + str(redout) + ', ' + str(greenout)
- + ', ' + str(blueout) + '}\n'
- + '\\renewenvironment{lyxgreyedout}\n'
- + ' {\\textcolor{note_fontcolor}\\bgroup}{\\egroup}\n')
+
+ i = find_token(document.header, "\\notefontcolor", 0)
+ if i == -1:
+ return
+
+ # are there any grey notes?
+ if find_token(document.body, "\\begin_inset Note Greyedout", 0) == -1:
+ # no need to do anything, and \renewcommand will throw an error
+ # since lyxgreyedout will not exist.
+ return
+
+ colorcode = get_value(document.header, '\\notefontcolor', i)
+ del document.header[i]
+ # the color code is in the form #rrggbb where every character denotes a hex number
+ red = hex2ratio(colorcode[1:3])
+ green = hex2ratio(colorcode[3:5])
+ blue = hex2ratio(colorcode[5:7])
+ # write the preamble
+ insert_to_preamble(0, document,
+ ['% Commands inserted by lyx2lyx to set the font color',
+ '% for greyed-out notes',
+ '\\@ifundefined{definecolor}{\\usepackage{color}}{}'
+ '\\definecolor{note_fontcolor}{rgb}{%s,%s,%s}' % (red, green, blue),
+ '\\renewenvironment{lyxgreyedout}',
+ ' {\\textcolor{note_fontcolor}\\bgroup}{\\egroup}'])
def revert_turkmen(document):
"Set language Turkmen to English"
- i = 0
+
if document.language == "turkmen":
document.language = "english"
i = find_token(document.header, "\\language", 0)
if i != -1:
document.header[i] = "\\language english"
+
j = 0
while True:
j = find_token(document.body, "\\lang turkmen", j)
if j == -1:
return
document.body[j] = document.body[j].replace("\\lang turkmen", "\\lang english")
- j = j + 1
+ j += 1
def revert_fontcolor(document):
" Reverts font color to preamble code "
- i = 0
- colorcode = ""
- while True:
- i = find_token(document.header, "\\fontcolor", i)
- if i == -1:
- return
- colorcode = get_value(document.header, '\\fontcolor', 0)
- del document.header[i]
- # don't clutter the preamble if backgroundcolor is not set
- if colorcode == "#000000":
- continue
- # the color code is in the form #rrggbb where every character denotes a hex number
- # convert the string to an int
- red = string.atoi(colorcode[1:3],16)
- # we want the output "0.5" for the value "127" therefore add here
- if red != 0:
- red = red + 1
- redout = float(red) / 256
- green = string.atoi(colorcode[3:5],16)
- if green != 0:
- green = green + 1
- greenout = float(green) / 256
- blue = string.atoi(colorcode[5:7],16)
- if blue != 0:
- blue = blue + 1
- blueout = float(blue) / 256
- # write the preamble
- insert_to_preamble(0, document,
- '% Commands inserted by lyx2lyx to set the font color\n'
- + '\\@ifundefined{definecolor}{\\usepackage{color}}{}\n'
- + '\\definecolor{document_fontcolor}{rgb}{'
- + str(redout) + ', ' + str(greenout)
- + ', ' + str(blueout) + '}\n'
- + '\\color{document_fontcolor}\n')
+ i = find_token(document.header, "\\fontcolor", 0)
+ if i == -1:
+ return
+ colorcode = get_value(document.header, '\\fontcolor', i)
+ del document.header[i]
+ # don't clutter the preamble if font color is not set
+ if colorcode == "#000000":
+ return
+ # the color code is in the form #rrggbb where every character denotes a hex number
+ red = hex2ratio(colorcode[1:3])
+ green = hex2ratio(colorcode[3:5])
+ blue = hex2ratio(colorcode[5:7])
+ # write the preamble
+ insert_to_preamble(0, document,
+ ['% Commands inserted by lyx2lyx to set the font color',
+ '\\@ifundefined{definecolor}{\\usepackage{color}}{}',
+ '\\definecolor{document_fontcolor}{rgb}{%s,%s,%s}' % (red, green, blue),
+ '\\color{document_fontcolor}'])
+
def revert_shadedboxcolor(document):
" Reverts shaded box color to preamble code "
- i = 0
- colorcode = ""
- while True:
- i = find_token(document.header, "\\boxbgcolor", i)
- if i == -1:
- return
- colorcode = get_value(document.header, '\\boxbgcolor', 0)
- del document.header[i]
- # the color code is in the form #rrggbb where every character denotes a hex number
- # convert the string to an int
- red = string.atoi(colorcode[1:3],16)
- # we want the output "0.5" for the value "127" therefore increment here
- if red != 0:
- red = red + 1
- redout = float(red) / 256
- green = string.atoi(colorcode[3:5],16)
- if green != 0:
- green = green + 1
- greenout = float(green) / 256
- blue = string.atoi(colorcode[5:7],16)
- if blue != 0:
- blue = blue + 1
- blueout = float(blue) / 256
- # write the preamble
- insert_to_preamble(0, document,
- '% Commands inserted by lyx2lyx to set the color\n'
- '% of boxes with shaded background\n'
- + '\\@ifundefined{definecolor}{\\usepackage{color}}{}\n'
- + '\\definecolor{shadecolor}{rgb}{'
- + str(redout) + ', ' + str(greenout)
- + ', ' + str(blueout) + '}\n')
+ i = find_token(document.header, "\\boxbgcolor", 0)
+ if i == -1:
+ return
+ colorcode = get_value(document.header, '\\boxbgcolor', i)
+ del document.header[i]
+ # the color code is in the form #rrggbb
+ red = hex2ratio(colorcode[1:3])
+ green = hex2ratio(colorcode[3:5])
+ blue = hex2ratio(colorcode[5:7])
+ # write the preamble
+ insert_to_preamble(0, document,
+ ['% Commands inserted by lyx2lyx to set the color of boxes with shaded background',
+ '\\@ifundefined{definecolor}{\\usepackage{color}}{}',
+ "\\definecolor{shadecolor}{rgb}{%s,%s,%s}" % (red, green, blue)])
def revert_lyx_version(document):
return
j = find_end_of_inset(document.body, i + 1)
if j == -1:
- # should not happen
document.warning("Malformed LyX document: Could not find end of Info inset.")
+ i += 1
+ continue
+
# We expect:
# \begin_inset Info
# type "lyxinfo"
length = document.body[l][7:]
# remove trailing '"'
length = length[:-1]
- # latex_length returns "bool,length"
- length = latex_length(length).split(",")[1]
+ length = latex_length(length)[1]
subst = "\\makebox[" + length + "][" \
+ align + "]{"
document.body[i:y + 1] = put_cmd_in_ert(subst)
del document.body[i:j + 1]
+def convert_prettyref(document):
+ " Converts prettyref references to neutral formatted refs "
+ re_ref = re.compile("^\s*reference\s+\"(\w+):(\S+)\"")
+ nm_ref = re.compile("^\s*name\s+\"(\w+):(\S+)\"")
+
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset CommandInset ref", i)
+ if i == -1:
+ break
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: No end of InsetRef!")
+ i += 1
+ continue
+ k = find_token(document.body, "LatexCommand prettyref", i)
+ if k != -1 and k < j:
+ document.body[k] = "LatexCommand formatted"
+ i = j + 1
+ document.header.insert(-1, "\\use_refstyle 0")
+
+
+def revert_refstyle(document):
+ " Reverts neutral formatted refs to prettyref "
+ re_ref = re.compile("^reference\s+\"(\w+):(\S+)\"")
+ nm_ref = re.compile("^\s*name\s+\"(\w+):(\S+)\"")
+
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset CommandInset ref", i)
+ if i == -1:
+ break
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: No end of InsetRef")
+ i += 1
+ continue
+ k = find_token(document.body, "LatexCommand formatted", i)
+ if k != -1 and k < j:
+ document.body[k] = "LatexCommand prettyref"
+ i = j + 1
+ i = find_token(document.header, "\\use_refstyle", 0)
+ if i != -1:
+ document.header.pop(i)
+
+
def revert_nameref(document):
" Convert namerefs to regular references "
cmds = ["Nameref", "nameref"]
i += 1
+def convert_flexnames(document):
+ "Convert \\begin_inset Flex Custom:Style to \\begin_inset Flex Style and similarly for CharStyle and Element."
+
+ i = 0
+ rx = re.compile(r'^\\begin_inset Flex (?:Custom|CharStyle|Element):(.+)$')
+ while True:
+ i = find_token(document.body, "\\begin_inset Flex", i)
+ if i == -1:
+ return
+ m = rx.match(document.body[i])
+ if m:
+ document.body[i] = "\\begin_inset Flex " + m.group(1)
+ i += 1
+
+
+flex_insets = [
+ ["Alert", "CharStyle:Alert"],
+ ["Code", "CharStyle:Code"],
+ ["Concepts", "CharStyle:Concepts"],
+ ["E-Mail", "CharStyle:E-Mail"],
+ ["Emph", "CharStyle:Emph"],
+ ["Expression", "CharStyle:Expression"],
+ ["Initial", "CharStyle:Initial"],
+ ["Institute", "CharStyle:Institute"],
+ ["Meaning", "CharStyle:Meaning"],
+ ["Noun", "CharStyle:Noun"],
+ ["Strong", "CharStyle:Strong"],
+ ["Structure", "CharStyle:Structure"],
+ ["ArticleMode", "Custom:ArticleMode"],
+ ["Endnote", "Custom:Endnote"],
+ ["Glosse", "Custom:Glosse"],
+ ["PresentationMode", "Custom:PresentationMode"],
+ ["Tri-Glosse", "Custom:Tri-Glosse"]
+]
+
+flex_elements = [
+ ["Abbrev", "Element:Abbrev"],
+ ["CCC-Code", "Element:CCC-Code"],
+ ["Citation-number", "Element:Citation-number"],
+ ["City", "Element:City"],
+ ["Code", "Element:Code"],
+ ["CODEN", "Element:CODEN"],
+ ["Country", "Element:Country"],
+ ["Day", "Element:Day"],
+ ["Directory", "Element:Directory"],
+ ["Dscr", "Element:Dscr"],
+ ["Email", "Element:Email"],
+ ["Emph", "Element:Emph"],
+ ["Filename", "Element:Filename"],
+ ["Firstname", "Element:Firstname"],
+ ["Fname", "Element:Fname"],
+ ["GuiButton", "Element:GuiButton"],
+ ["GuiMenu", "Element:GuiMenu"],
+ ["GuiMenuItem", "Element:GuiMenuItem"],
+ ["ISSN", "Element:ISSN"],
+ ["Issue-day", "Element:Issue-day"],
+ ["Issue-months", "Element:Issue-months"],
+ ["Issue-number", "Element:Issue-number"],
+ ["KeyCap", "Element:KeyCap"],
+ ["KeyCombo", "Element:KeyCombo"],
+ ["Keyword", "Element:Keyword"],
+ ["Literal", "Element:Literal"],
+ ["MenuChoice", "Element:MenuChoice"],
+ ["Month", "Element:Month"],
+ ["Orgdiv", "Element:Orgdiv"],
+ ["Orgname", "Element:Orgname"],
+ ["Postcode", "Element:Postcode"],
+ ["SS-Code", "Element:SS-Code"],
+ ["SS-Title", "Element:SS-Title"],
+ ["State", "Element:State"],
+ ["Street", "Element:Street"],
+ ["Surname", "Element:Surname"],
+ ["Volume", "Element:Volume"],
+ ["Year", "Element:Year"]
+]
+
+
+def revert_flexnames(document):
+ if document.backend == "latex":
+ flexlist = flex_insets
+ else:
+ flexlist = flex_elements
+
+ rx = re.compile(r'^\\begin_inset Flex\s+(.+)$')
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset Flex", i)
+ if i == -1:
+ return
+ m = rx.match(document.body[i])
+ if not m:
+ document.warning("Illegal flex inset: " + document.body[i])
+ i += 1
+ continue
+
+ style = m.group(1)
+ for f in flexlist:
+ if f[0] == style:
+ document.body[i] = "\\begin_inset Flex " + f[1]
+ break
+
+ i += 1
+
+
def convert_mathdots(document):
" Load mathdots automatically "
while True:
def revert_mathdots(document):
" Load mathdots if used in the document "
+ i = 0
+ ddots = re.compile(r'\\begin_inset Formula .*\\ddots', re.DOTALL)
+ vdots = re.compile(r'\\begin_inset Formula .*\\vdots', re.DOTALL)
+ iddots = re.compile(r'\\begin_inset Formula .*\\iddots', re.DOTALL)
+ mathdots = find_token(document.header, "\\use_mathdots" , 0)
+ no = find_token(document.header, "\\use_mathdots 0" , 0)
+ auto = find_token(document.header, "\\use_mathdots 1" , 0)
+ yes = find_token(document.header, "\\use_mathdots 2" , 0)
+ if mathdots != -1:
+ del document.header[mathdots]
while True:
- i = find_token(document.header, "\\use_mathdots" , 0)
- if i != -1:
- # use \@ifundefined to catch also the "auto" case
- add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
- add_to_preamble(document, ["\\@ifundefined{iddots}{\\usepackage{mathdots}}\n"])
- del document.header[i]
- break
+ i = find_token(document.body, '\\begin_inset Formula', i)
+ if i == -1:
+ return
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: Can't find end of Formula inset.")
+ return
+ k = ddots.search("\n".join(document.body[i:j]))
+ l = vdots.search("\n".join(document.body[i:j]))
+ m = iddots.search("\n".join(document.body[i:j]))
+ if (yes == -1) and ((no != -1) or (not k and not l and not m) or (auto != -1 and not m)):
+ i += 1
+ continue
+ # use \@ifundefined to catch also the "auto" case
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, ["\\@ifundefined{iddots}{\\usepackage{mathdots}}\n"])
+ return
def convert_rule(document):
i = 0
while True:
i = find_token(document.body, "\\lyxline" , i)
- if i != -1:
- j = find_token(document.body, "\\color" , i - 2)
- if j == i - 2:
- color = document.body[j] + '\n'
- else:
- color = ''
- k = find_token(document.body, "\\begin_layout Standard" , i - 4)
- # we need to handle the case that \lyxline is in a separate paragraph and that it is colored
- # the result is then an extra empty paragraph which we get by adding an empty ERT inset
- if k == i - 4 and j == i - 2 and document.body[i - 1] == '':
- layout = '\\begin_inset ERT\nstatus collapsed\n\n\\begin_layout Plain Layout\n\n\n\\end_layout\n\n\\end_inset\n' \
- + '\\end_layout\n\n' \
- + '\\begin_layout Standard\n'
- elif k == i - 2 and document.body[i - 1] == '':
- layout = ''
- else:
- layout = '\\end_layout\n\n' \
- + '\\begin_layout Standard\n'
- l = find_token(document.body, "\\begin_layout Standard" , i + 4)
- if l == i + 4 and document.body[i + 1] == '':
- layout2 = ''
- else:
- layout2 = '\\end_layout\n' \
- + '\n\\begin_layout Standard\n'
- subst = layout \
- + '\\noindent\n\n' \
- + color \
- + '\\begin_inset CommandInset line\n' \
- + 'LatexCommand rule\n' \
- + 'offset "0.5ex"\n' \
- + 'width "100line%"\n' \
- + 'height "1pt"\n' \
- + '\n\\end_inset\n\n\n' \
- + layout2
- document.body[i] = subst
- i += 1
- else:
+ if i == -1:
return
+
+ j = find_token(document.body, "\\color" , i - 2)
+ if j == i - 2:
+ color = document.body[j] + '\n'
+ else:
+ color = ''
+ k = find_token(document.body, "\\begin_layout Standard" , i - 4)
+ # we need to handle the case that \lyxline is in a separate paragraph and that it is colored
+ # the result is then an extra empty paragraph which we get by adding an empty ERT inset
+ if k == i - 4 and j == i - 2 and document.body[i - 1] == '':
+ layout = '\\begin_inset ERT\nstatus collapsed\n\n\\begin_layout Plain Layout\n\n\n\\end_layout\n\n\\end_inset\n' \
+ + '\\end_layout\n\n' \
+ + '\\begin_layout Standard\n'
+ elif k == i - 2 and document.body[i - 1] == '':
+ layout = ''
+ else:
+ layout = '\\end_layout\n\n' \
+ + '\\begin_layout Standard\n'
+ l = find_token(document.body, "\\begin_layout Standard" , i + 4)
+ if l == i + 4 and document.body[i + 1] == '':
+ layout2 = ''
+ else:
+ layout2 = '\\end_layout\n' \
+ + '\n\\begin_layout Standard\n'
+ subst = layout \
+ + '\\noindent\n\n' \
+ + color \
+ + '\\begin_inset CommandInset line\n' \
+ + 'LatexCommand rule\n' \
+ + 'offset "0.5ex"\n' \
+ + 'width "100line%"\n' \
+ + 'height "1pt"\n' \
+ + '\n\\end_inset\n\n\n' \
+ + layout2
+ document.body[i] = subst
+ i += 1
def revert_rule(document):
i = 0
while 1:
i = find_token(document.body, "\\begin_inset CommandInset line" , i)
- if i != -1:
- # find end of inset
- j = find_token(document.body, "\\end_inset" , i)
- # assure we found the end_inset of the current inset
- if j > i + 6 or j == -1:
- document.warning("Malformed LyX document: Can't find end of line inset.")
- return
- # determine the optional offset
- k = find_token(document.body, 'offset', i)
- if k != -1 and k < j:
- offset = document.body[k][8:]
- else:
- offset = '0"'
- # determine the width
- l = find_token(document.body, 'width', k + 1)
- width = document.body[l][7:]
- # determine the height
- m = find_token(document.body, 'height', l + 1)
- height = document.body[m][8:]
- # remove trailing '"'
- offset = offset[:-1]
- width = width[:-1]
- height = height[:-1]
- # output the \rule command
- if offset <> "0":
- subst = "\\rule[" + offset + "]{" + width + "}{" + height + "}"
- else:
- subst = "\\rule{" + width + "}{" + height + "}"
- document.body[i:j + 1] = put_cmd_in_ert(subst)
- i += 1
- else:
+ if i == -1:
+ return
+ # find end of inset
+ j = find_token(document.body, "\\end_inset" , i)
+ # assure we found the end_inset of the current inset
+ if j > i + 6 or j == -1:
+ document.warning("Malformed LyX document: Can't find end of line inset.")
return
+ # determine the optional offset
+ k = find_token(document.body, 'offset', i, j)
+ if k != -1:
+ offset = document.body[k][8:-1]
+ else:
+ offset = ""
+ # determine the width
+ l = find_token(document.body, 'width', i, j)
+ if l != -1:
+ width = document.body[l][7:-1]
+ else:
+ width = "100col%"
+ # determine the height
+ m = find_token(document.body, 'height', i, j)
+ if m != -1:
+ height = document.body[m][8:-1]
+ else:
+ height = "1pt"
+ # output the \rule command
+ if offset:
+ subst = "\\rule[" + offset + "]{" + width + "}{" + height + "}"
+ else:
+ subst = "\\rule{" + width + "}{" + height + "}"
+ document.body[i:j + 1] = put_cmd_in_ert(subst)
+ i += 1
+
def revert_diagram(document):
+ " Add the feyn package if \\Diagram is used in math "
i = 0
re_diagram = re.compile(r'\\begin_inset Formula .*\\Diagram', re.DOTALL)
while True:
return
j = find_end_of_inset(document.body, i)
if j == -1:
- document.warning("Malformed LyX document: Can't find end of line inset.")
+ document.warning("Malformed LyX document: Can't find end of Formula inset.")
return
m = re_diagram.search("\n".join(document.body[i:j]))
if not m:
i += 1
continue
- add_to_preamble(document, "\\use_package{feyn}")
+ add_to_preamble(document, ["% this command was inserted by lyx2lyx"])
+ add_to_preamble(document, "\\usepackage{feyn}")
# only need to do it once!
return
+def convert_bibtex_clearpage(document):
+ " insert a clear(double)page bibliographystyle if bibtotoc option is used "
+
+ i = find_token(document.header, '\\papersides', 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Can't find papersides definition.")
+ return
+ sides = int(document.header[i][12])
+
+ j = 0
+ while True:
+ j = find_token(document.body, "\\begin_inset CommandInset bibtex", j)
+ if j == -1:
+ return
+
+ k = find_end_of_inset(document.body, j)
+ if k == -1:
+ document.warning("Can't find end of Bibliography inset at line " + str(j))
+ j += 1
+ continue
+
+ # only act if there is the option "bibtotoc"
+ m = find_token(document.body, 'options', j, k)
+ if m == -1:
+ document.warning("Can't find options for bibliography inset at line " + str(j))
+ j = k
+ continue
+
+ optline = document.body[m]
+ idx = optline.find("bibtotoc")
+ if idx == -1:
+ j = k
+ continue
+
+ # so we want to insert a new page right before the paragraph that
+ # this bibliography thing is in. we'll look for it backwards.
+ lay = j - 1
+ while lay >= 0:
+ if document.body[lay].startswith("\\begin_layout"):
+ break
+ lay -= 1
+
+ if lay < 0:
+ document.warning("Can't find layout containing bibliography inset at line " + str(j))
+ j = k
+ continue
+
+ subst1 = '\\begin_layout Standard\n' \
+ + '\\begin_inset Newpage clearpage\n' \
+ + '\\end_inset\n\n\n' \
+ + '\\end_layout\n'
+ subst2 = '\\begin_layout Standard\n' \
+ + '\\begin_inset Newpage cleardoublepage\n' \
+ + '\\end_inset\n\n\n' \
+ + '\\end_layout\n'
+ if sides == 1:
+ document.body.insert(lay, subst1)
+ document.warning(subst1)
+ else:
+ document.body.insert(lay, subst2)
+ document.warning(subst2)
+
+ j = k
+
##
# Conversion hub
[389, [convert_html_quotes]],
[390, []],
[391, []],
- [392, [convert_beamer_args]],
+ [392, []],
[393, [convert_optarg]],
[394, [convert_use_makebox]],
[395, []],
[398, []],
[399, [convert_mathdots]],
[400, [convert_rule]],
- [401, []]
- ]
-
-revert = [[400, [revert_diagram]],
+ [401, []],
+ [402, [convert_bibtex_clearpage]],
+ [403, [convert_flexnames]],
+ [404, [convert_prettyref]]
+]
+
+revert = [[403, [revert_refstyle]],
+ [402, [revert_flexnames]],
+ [401, []],
+ [400, [revert_diagram]],
[399, [revert_rule]],
[398, [revert_mathdots]],
[397, [revert_mathrsfs]],
projects / lyx.git / blobdiff