# where the last statement resets the counter to accord with the added
# lines.
def wrap_into_ert(string, src, dst):
- " Wrap a something into an ERT"
+ '''Within string, replace occurrences of src with dst, wrapped into ERT
+ E.g.: wrap_into_ert('sch\"on', "\\", "\\backslash") is:
+ sch<ERT>\\backslash</ERT>"on'''
return string.replace(src, '\n\\begin_inset ERT\nstatus collapsed\n\\begin_layout Standard\n'
+ dst + '\n\\end_layout\n\\end_inset\n')
+def put_cmd_in_ert(string):
+ string = string.replace('\\', "\\backslash\n")
+ string = "\\begin_inset ERT\nstatus collapsed\n\\begin_layout Standard\n" \
+ + string + "\n\\end_layout\n\\end_inset"
+ return string
+
def add_to_preamble(document, text):
""" Add text to the preamble if it is not already there.
Only the first line is checked!"""
document.preamble.extend(text)
+def insert_to_preamble(index, document, text):
+ """ Insert text to the preamble at a given line"""
+
+ document.preamble.insert(index, text)
+
# Convert a LyX length into a LaTeX length
def convert_len(len):
units = {"text%":"\\backslash\ntextwidth", "col%":"\\backslash\ncolumnwidth",
return l
+def read_unicodesymbols():
+ " Read the unicodesymbols list of unicode characters and corresponding commands."
+ pathname = os.path.abspath(os.path.dirname(sys.argv[0]))
+ fp = open(os.path.join(pathname.strip('lyx2lyx'), 'unicodesymbols'))
+ spec_chars = []
+ # Two backslashes, followed by some non-word character, and then a character
+ # in brackets. The idea is to check for constructs like: \"{u}, which is how
+ # they are written in the unicodesymbols file; but they can also be written
+ # as: \"u.
+ r = re.compile(r'\\\\(\W)\{(\w)\}')
+ for line in fp.readlines():
+ if line[0] != '#' and line.strip() != "":
+ line=line.replace(' "',' ') # remove all quotation marks with spaces before
+ line=line.replace('" ',' ') # remove all quotation marks with spaces after
+ line=line.replace(r'\"','"') # replace \" by " (for characters with diaeresis)
+ try:
+ [ucs4,command,dead] = line.split(None,2)
+ if command[0:1] != "\\":
+ continue
+ spec_chars.append([command, unichr(eval(ucs4))])
+ except:
+ continue
+ m = r.match(command)
+ if m != None:
+ command = "\\\\"
+ # If the character is a double-quote, then we need to escape it, too,
+ # since it is done that way in the LyX file.
+ if m.group(1) == "\"":
+ command += "\\"
+ command += m.group(1) + m.group(2)
+ spec_chars.append([command, unichr(eval(ucs4))])
+ fp.close()
+ return spec_chars
+
+
+def extract_argument(line):
+ 'Extracts a LaTeX argument from the start of line. Returns (arg, rest).'
+
+ if not line:
+ return (None, "")
+
+ bracere = re.compile("(\s*)(.*)")
+ n = bracere.match(line)
+ whitespace = n.group(1)
+ stuff = n.group(2)
+ brace = stuff[:1]
+ if brace != "[" and brace != "{":
+ return (None, line)
+
+ # find closing brace
+ remain = stuff[1:]
+ pos = 0
+ num = 1
+ term = "}"
+ if brace == "[":
+ term = "]"
+ skip = False
+ for c in remain:
+ if skip:
+ skip = False
+ elif c == "\\":
+ skip = True
+ elif c == brace:
+ num += 1
+ elif c == term:
+ num -= 1
+ if c == 0:
+ break
+ pos += 1
+ if num != 0:
+ # We never found the matching brace
+ # So, to be on the safe side, let's just return everything
+ # which will then get wrapped as ERT
+ return (line, "")
+ return (line[:pos + 1], line[pos + 1:])
+
+
+def latex2ert(line):
+ '''Converts LaTeX commands into ERT. line may well be a multi-line
+ string when it is returned.'''
+ if not line:
+ return line
+
+ retval = ""
+ ## FIXME Escaped \ ??
+ # This regex looks for a LaTeX command---i.e., something of the form
+ # "\alPhaStuFF", or "\X", where X is any character---where the command
+ # may also be preceded by an additional backslash, which is how it would
+ # appear (e.g.) in an InsetIndex.
+ labelre = re.compile(r'(.*?)\\?(\\(?:[a-zA-Z]+|.))(.*)')
+
+ m = labelre.match(line)
+ while m != None:
+ retval += m.group(1)
+ cmd = m.group(2)
+ end = m.group(3)
+
+ while True:
+ (arg, rest) = extract_argument(end)
+ if arg == None:
+ break
+ cmd += arg
+ end = rest
+ # If we wanted to put labels into an InsetLabel, for example, then we
+ # would just need to test here for cmd == "label" and then take some
+ # appropriate action, i.e., to use arg to get the content and then
+ # wrap it appropriately.
+ cmd = put_cmd_in_ert(cmd)
+ retval += "\n" + cmd + "\n"
+ line = end
+ m = labelre.match(line)
+ retval += line
+ return retval
+
+
+#Bug 5022....
+#Might should do latex2ert first, then deal with stuff that DOESN'T
+#end up inside ERT. That routine could be modified so that it returned
+#a list of lines, and we could then skip ERT bits and only deal with
+#the other bits.
+def latex2lyx(data):
+ '''Takes a string, possibly multi-line, and returns the result of
+ converting LaTeX constructs into LyX constructs. Returns a list of
+ lines, suitable for insertion into document.body.'''
+
+ retval = []
+
+ # Convert LaTeX to Unicode
+ reps = read_unicodesymbols()
+ # Commands of this sort need to be checked to make sure they are
+ # followed by a non-alpha character, lest we replace too much.
+ hardone = re.compile(r'^\\\\[a-zA-Z]+$')
+
+ for rep in reps:
+ if hardone.match(rep[0]):
+ pos = 0
+ while True:
+ pos = data.find(rep[0], pos)
+ if pos == -1:
+ break
+ nextpos = pos + len(rep[0])
+ if nextpos < len(data) and data[nextpos].isalpha():
+ # not the end of that command
+ pos = nextpos
+ continue
+ data = data[:pos] + rep[1] + data[nextpos:]
+ pos = nextpos
+ else:
+ data = data.replace(rep[0], rep[1])
+
+ # Generic, \" -> ":
+ data = wrap_into_ert(data, r'\"', '"')
+
+ # Math:
+ mathre = re.compile('^(.*?)(\$.*?\$)(.*)')
+ lines = data.split('\n')
+ for line in lines:
+ #document.warning("LINE: " + line)
+ #document.warning(str(i) + ":" + document.body[i])
+ #document.warning("LAST: " + document.body[-1])
+ g = line
+ m = mathre.match(g)
+ while m != None:
+ s = m.group(1)
+ f = m.group(2).replace('\\\\', '\\')
+ g = m.group(3)
+ if s:
+ # this is non-math!
+ s = latex2ert(s)
+ subst = s.split('\n')
+ retval += subst
+ retval.append("\\begin_inset Formula " + f)
+ retval.append("\\end_inset")
+ m = mathre.match(g)
+ # Handle whatever is left, which is just text
+ g = latex2ert(g)
+ subst = g.split('\n')
+ retval += subst
+ return retval
+
+
+def lyx2latex(document, lines):
+ 'Convert some LyX stuff into corresponding LaTeX stuff, as best we can.'
+ # clean up multiline stuff
+ content = ""
+ ert_end = 0
+ reps = read_unicodesymbols()
+
+ for curline in range(len(lines)):
+ line = lines[curline]
+ if line.startswith("\\begin_inset ERT"):
+ # We don't want to replace things inside ERT, so figure out
+ # where the end of the inset is.
+ ert_end = find_end_of_inset(lines, curline + 1)
+ continue
+ elif line.startswith("\\begin_inset Formula"):
+ line = line[20:]
+ elif line.startswith("\\begin_inset Quotes"):
+ # For now, we do a very basic reversion. Someone who understands
+ # quotes is welcome to fix it up.
+ qtype = line[20:].strip()
+ # lang = qtype[0]
+ side = qtype[1]
+ dbls = qtype[2]
+ if side == "l":
+ if dbls == "d":
+ line = "``"
+ else:
+ line = "`"
+ else:
+ if dbls == "d":
+ line = "''"
+ else:
+ line = "'"
+ elif line.isspace() or \
+ line.startswith("\\begin_layout") or \
+ line.startswith("\\end_layout") or \
+ line.startswith("\\begin_inset") or \
+ line.startswith("\\end_inset") or \
+ line.startswith("\\lang") or \
+ line.strip() == "status collapsed" or \
+ line.strip() == "status open":
+ #skip all that stuff
+ continue
+
+ # this needs to be added to the preamble because of cases like
+ # \textmu, \textbackslash, etc.
+ add_to_preamble(document, ['% added by lyx2lyx for converted index entries',
+ '\\@ifundefined{textmu}',
+ ' {\\usepackage{textcomp}}{}'])
+ # a lossless reversion is not possible
+ # try at least to handle some common insets and settings
+ if ert_end >= curline:
+ line = line.replace(r'\backslash', r'\\')
+ else:
+ line = line.replace('&', '\\&{}')
+ line = line.replace('#', '\\#{}')
+ line = line.replace('^', '\\^{}')
+ line = line.replace('%', '\\%{}')
+ line = line.replace('_', '\\_{}')
+ line = line.replace('$', '\\${}')
+
+ # Do the LyX text --> LaTeX conversion
+ for rep in reps:
+ line = line.replace(rep[1], rep[0] + "{}")
+ line = line.replace(r'\backslash', r'\textbackslash{}')
+ line = line.replace(r'\series bold', r'\bfseries{}').replace(r'\series default', r'\mdseries{}')
+ line = line.replace(r'\shape italic', r'\itshape{}').replace(r'\shape smallcaps', r'\scshape{}')
+ line = line.replace(r'\shape slanted', r'\slshape{}').replace(r'\shape default', r'\upshape{}')
+ line = line.replace(r'\emph on', r'\em{}').replace(r'\emph default', r'\em{}')
+ line = line.replace(r'\noun on', r'\scshape{}').replace(r'\noun default', r'\upshape{}')
+ line = line.replace(r'\bar under', r'\underbar{').replace(r'\bar default', r'}')
+ line = line.replace(r'\family sans', r'\sffamily{}').replace(r'\family default', r'\normalfont{}')
+ line = line.replace(r'\family typewriter', r'\ttfamily{}').replace(r'\family roman', r'\rmfamily{}')
+ line = line.replace(r'\InsetSpace ', r'').replace(r'\SpecialChar ', r'')
+ content += line
+ return content
+
+
####################################################################
def convert_ltcaption(document):
i = find_token(document.body, "\\begin_inset CharStyle", i)
if i == -1:
return
- document.body[i] = document.body[i].replace("CharStyle CharStyle:", "CharStyle")
+ document.body[i] = document.body[i].replace("CharStyle CharStyle:", "CharStyle ")
i += 1
setupstart = ""
setupend = ""
# write the preamble
- add_to_preamble(document,
- ['% Commands inserted by lyx2lyx for PDF properties',
- '\\usepackage[unicode=true'
+ # babel must be loaded before hyperref and hyperref the first part
+ # of the preamble, like in LyX 1.6
+ insert_to_preamble(0, document,
+ '% Commands inserted by lyx2lyx for PDF properties\n'
+ + '\\usepackage{babel}\n'
+ + '\\usepackage[unicode=true'
+ bookmarks
+ breaklinks
+ pdfborder
+ colorlinks
+ pagemode
+ ']\n'
- ' {hyperref}\n'
+ + ' {hyperref}\n'
+ setupstart
+ title
+ author
+ subject
+ keywords
+ otheroptions
- + setupend])
+ + setupend)
def remove_inzip_options(document):
"Revert optional options for wrap floats (wrapfig)."
i = 0
while True:
- i = find_token(document.body, "lines", i)
+ i = find_token(document.body, "\\begin_inset Wrap figure", i)
if i == -1:
return
- j = find_token(document.body, "overhang", i+1)
- if j != i + 2 and j != -1:
- document.warning("Malformed LyX document: Couldn't find overhang parameter of wrap float.")
+ j = find_end_of_inset(document.body, i)
if j == -1:
- return
- del document.body[i]
- del document.body[j-1]
- i = i + 1
-
+ document.warning("Can't find end of Wrap inset at line " + str(i))
+ i += 1
+ continue
+ k = find_default_layout(document, i, j)
+ if k == -1:
+ document.warning("Can't find default layout for Wrap figure!")
+ i = j
+ continue
+ # Options should be between i and k now
+ l = find_token(document.body, "lines", i, k)
+ if l == -1:
+ document.warning("Can't find lines option for Wrap figure!")
+ i = k
+ continue
+ m = find_token(document.body, "overhang", i + 1, k)
+ if m == -1:
+ document.warning("Malformed LyX document: Couldn't find overhang parameter of wrap float!")
+ i = k
+ continue
+ # Do these in reverse order
+ del document.body[m]
+ del document.body[l]
+ i = k
-# To convert and revert indices, we need to convert between LaTeX
-# strings and LyXText. Here we do a minimal conversion to prevent
-# crashes and data loss. Manual patch-up may be needed.
-replacements = [
- [r'\\\"a', u'ä'],
- [r'\\\"o', u'ö'],
- [r'\\\"u', u'ü'],
- [r'\\\'a', u'á'],
- [r'\\\'e', u'é'],
- [r'\\\'i', u'í'],
- [r'\\\'o', u'ó'],
- [r'\\\'u', u'ú']
-]
def convert_latexcommand_index(document):
"Convert from LatexCommand form to collapsable form."
i = 0
+ r1 = re.compile('name "(.*)"')
while True:
i = find_token(document.body, "\\begin_inset CommandInset index", i)
if i == -1:
return
if document.body[i + 1] != "LatexCommand index": # Might also be index_print
return
- fullcontent = document.body[i + 2][5:]
- fullcontent.strip()
- fullcontent = fullcontent[1:-1]
- document.body[i:i + 3] = ["\\begin_inset Index",
- "status collapsed",
- "\\begin_layout Standard"]
- i += 3
- # We are now on the blank line preceding "\end_inset"
- # We will write the content here, into the inset.
-
- # Do the LaTeX --> LyX text conversion
- for rep in replacements:
- fullcontent = fullcontent.replace(rep[0], rep[1])
- # Generic, \" -> ":
- fullcontent = wrap_into_ert(fullcontent, r'\"', '"')
- # Math:
- r = re.compile('^(.*?)(\$.*?\$)(.*)')
- lines = fullcontent.split('\n')
- for line in lines:
- #document.warning("LINE: " + line)
- #document.warning(str(i) + ":" + document.body[i])
- #document.warning("LAST: " + document.body[-1])
- g = line
- while r.match(g):
- m = r.match(g)
- s = m.group(1)
- f = m.group(2).replace('\\\\', '\\')
- g = m.group(3)
- if s:
- # this is non-math!
- s = wrap_into_ert(s, r'\\', '\\backslash')
- s = wrap_into_ert(s, '{', '{')
- s = wrap_into_ert(s, '}', '}')
- subst = s.split('\n')
- document.body[i:i] = subst
- i += len(subst)
- document.body.insert(i + 1, "\\begin_inset Formula " + f)
- document.body.insert(i + 2, "\\end_inset")
+ j = find_end_of_inset(document.body, i + 2)
+ if j == -1:
+ document.warning("Unable to find end of index inset at line " + i + "!")
i += 2
- # Generic, \\ -> \backslash:
- g = wrap_into_ert(g, r'\\', '\\backslash')
- g = wrap_into_ert(g, '{', '{')
- g = wrap_into_ert(g, '}', '}')
- subst = g.split('\n')
- document.body[i+1:i+1] = subst
- i += len(subst)
- document.body.insert(i + 1, "\\end_layout")
+ continue
+ m = r1.match(document.body[i + 2])
+ if m == None:
+ document.warning("Unable to match: " + document.body[i+2])
+ # this can happen with empty index insets!
+ linelist = [""]
+ else:
+ fullcontent = m.group(1)
+ linelist = latex2lyx(fullcontent)
+ #document.warning(fullcontent)
+
+ linelist = ["\\begin_inset Index", "status collapsed", "\\begin_layout Standard", ""] + \
+ linelist + ["\\end_layout"]
+ document.body[i : j] = linelist
+ i += len(linelist) - (j - i)
def revert_latexcommand_index(document):
j = find_end_of_inset(document.body, i + 1)
if j == -1:
return
- del document.body[j - 1]
- del document.body[j - 2] # \end_layout
- document.body[i] = "\\begin_inset CommandInset index"
- document.body[i + 1] = "LatexCommand index"
- # clean up multiline stuff
- content = ""
- ert_end = 0
- for k in range(i + 3, j - 2):
- line = document.body[k]
- if line.startswith("\\begin_inset ERT"):
- ert_end = find_end_of_inset(document.body, k + 1)
- line = line[16:]
- if line.startswith("\\begin_inset Formula"):
- line = line[20:]
- if line.startswith("\\begin_layout Standard"):
- line = line[22:]
- if line.startswith("\\begin_layout Plain Layout"):
- line = line[26:]
- if line.startswith("\\end_layout"):
- line = line[11:]
- if line.startswith("\\end_inset"):
- line = line[10:]
- if line.startswith("status collapsed"):
- line = line[16:]
- if line.startswith("status open"):
- line = line[11:]
- # a lossless reversion is not possible
- # try at least to handle some common insets and settings
- # do not replace inside ERTs
- if ert_end < k:
- # Do the LyX text --> LaTeX conversion
- for rep in replacements:
- line = line.replace(rep[1], rep[0])
- line = line.replace(r'\backslash', r'\textbackslash{}')
- line = line.replace(r'\series bold', r'\bfseries{}').replace(r'\series default', r'\mdseries{}')
- line = line.replace(r'\shape italic', r'\itshape{}').replace(r'\shape smallcaps', r'\scshape{}')
- line = line.replace(r'\shape slanted', r'\slshape{}').replace(r'\shape default', r'\upshape{}')
- line = line.replace(r'\emph on', r'\em{}').replace(r'\emph default', r'\em{}')
- line = line.replace(r'\noun on', r'\scshape{}').replace(r'\noun default', r'\upshape{}')
- line = line.replace(r'\bar under', r'\underbar{').replace(r'\bar default', r'}')
- line = line.replace(r'\family sans', r'\sffamily{}').replace(r'\family default', r'\normalfont{}')
- line = line.replace(r'\family typewriter', r'\ttfamily{}').replace(r'\family roman', r'\rmfamily{}')
- line = line.replace(r'\InsetSpace ', r'').replace(r'\SpecialChar ', r'')
- else:
- line = line.replace(r'\backslash', r'\\')
- content = content + line;
- document.body[i + 3] = "name " + '"' + content + '"'
- for k in range(i + 4, j - 2):
- del document.body[i + 4]
- document.body.insert(i + 4, "")
- del document.body[i + 2] # \begin_layout standard
- i = i + 5
+
+ content = lyx2latex(document, document.body[i:j])
+ # escape quotes
+ content = content.replace('"', r'\"')
+ document.body[i:j] = ["\\begin_inset CommandInset index", "LatexCommand index",
+ "name " + '"' + content + '"', ""]
+ i += 5
def revert_wraptable(document):
j = j + 1
+def convert_japanese_cjk(document):
+ "Set language japanese to japanese-cjk"
+ # Set document language from japanese-plain to japanese
+ i = 0
+ if document.language == "japanese":
+ document.language = "japanese-cjk"
+ i = find_token(document.header, "\\language", 0)
+ if i != -1:
+ document.header[i] = "\\language japanese-cjk"
+ j = 0
+ while True:
+ j = find_token(document.body, "\\lang japanese", j)
+ if j == -1:
+ return
+ document.body[j] = document.body[j].replace("\\lang japanese", "\\lang japanese-cjk")
+ j = j + 1
+
+
def revert_japanese(document):
"Set language japanese-plain to japanese"
# Set document language from japanese-plain to japanese
j = j + 1
+def revert_japanese_cjk(document):
+ "Set language japanese-cjk to japanese"
+ # Set document language from japanese-plain to japanese
+ i = 0
+ if document.language == "japanese-cjk":
+ document.language = "japanese"
+ i = find_token(document.header, "\\language", 0)
+ if i != -1:
+ document.header[i] = "\\language japanese"
+ j = 0
+ while True:
+ j = find_token(document.body, "\\lang japanese-cjk", j)
+ if j == -1:
+ return
+ document.body[j] = document.body[j].replace("\\lang japanese-cjk", "\\lang japanese")
+ j = j + 1
+
+
def revert_japanese_encoding(document):
"Set input encoding form EUC-JP-plain to EUC-JP etc."
# Set input encoding form EUC-JP-plain to EUC-JP etc.
return
m = r.match(document.body[i])
if m == None:
- document.warning("Weirdly formed \\begin_layout at line %d of body!" % i)
+ # This is an empty layout
+ # document.warning("Weirdly formed \\begin_layout at line %d of body!" % i)
i += 1
continue
m = m.group(1)
i = i + 2
def revert_url(document):
- 'Reverts Flex URL insets to old-style URL insets'
- i = 0
- while True:
- i = find_token(document.body, "\\begin_inset Flex URL", i)
- if i == -1:
- return
- j = find_end_of_inset(document.body, i)
- if j == -1:
- document.warning("Can't find end of inset in revert_url!")
- return
- k = find_default_layout(document, i, j)
- if k == -1:
- document.warning("Can't find default layout in revert_url!")
- i = j
- continue
- l = find_end_of(document.body, k, "\\begin_layout", "\\end_layout")
- if l == -1 or l >= j:
- document.warning("Can't find end of default layout in revert_url!")
- i = j
- continue
- # OK, so the inset's data is between lines k and l.
- data = " ".join(document.body[k+1:l])
- data = data.strip()
- newinset = ["\\begin_inset LatexCommand url", "target \"" + data + "\"",\
- "", "\\end_inset"]
- document.body[i:j+1] = newinset
- i = i + len(newinset)
-
-
+ 'Reverts Flex URL insets to old-style URL insets'
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset Flex URL", i)
+ if i == -1:
+ return
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Can't find end of inset in revert_url!")
+ return
+ k = find_default_layout(document, i, j)
+ if k == -1:
+ document.warning("Can't find default layout in revert_url!")
+ i = j
+ continue
+ l = find_end_of(document.body, k, "\\begin_layout", "\\end_layout")
+ if l == -1 or l >= j:
+ document.warning("Can't find end of default layout in revert_url!")
+ i = j
+ continue
+ # OK, so the inset's data is between lines k and l.
+ data = " ".join(document.body[k+1:l])
+ data = data.strip()
+ newinset = ["\\begin_inset LatexCommand url", "target \"" + data + "\"",\
+ "", "\\end_inset"]
+ document.body[i:j+1] = newinset
+ i = i + len(newinset)
+
def convert_include(document):
'Converts include insets to new format.'
def revert_include(document):
'Reverts include insets to old format.'
i = 0
+ r0 = re.compile('preview.*')
r1 = re.compile('LatexCommand (.+)')
- r2 = re.compile('filename (.+)')
- r3 = re.compile('options (.*)')
+ r2 = re.compile('filename "(.+)"')
+ r3 = re.compile('lstparams "(.*)"')
while True:
i = find_token(document.body, "\\begin_inset CommandInset include", i)
if i == -1:
return
- previewline = document.body[i + 1]
- m = r1.match(document.body[i + 2])
+ nextline = i + 1
+ m = r1.match(document.body[nextline])
if m == None:
document.warning("Malformed LyX document: No LatexCommand line for `" +
document.body[i] + "' on line " + str(i) + ".")
i += 1
continue
cmd = m.group(1)
- m = r2.match(document.body[i + 3])
+ nextline += 1
+ if r0.match(document.body[nextline]):
+ previewline = document.body[nextline]
+ nextline += 1
+ else:
+ previewline = ""
+ m = r2.match(document.body[nextline])
if m == None:
document.warning("Malformed LyX document: No filename line for `" + \
document.body[i] + "' on line " + str(i) + ".")
i += 2
continue
fn = m.group(1)
+ nextline += 1
options = ""
- numlines = 4
if (cmd == "lstinputlisting"):
- m = r3.match(document.body[i + 4])
+ m = r3.match(document.body[nextline])
if m != None:
options = m.group(1)
numlines = 5
+ nextline += 1
newline = "\\begin_inset Include \\" + cmd + "{" + fn + "}"
if options:
newline += ("[" + options + "]")
- insertion = [newline, previewline]
- document.body[i : i + numlines] = insertion
+ insertion = [newline]
+ if previewline != "":
+ insertion.append(previewline)
+ document.body[i : nextline] = insertion
i += 2
'position "t"',
'hor_pos "c"',
'has_inner_box 0',
- 'inner_pos "t"',
+ 'inner_pos "t"',
'use_parbox 0',
'width "100col%"',
'special "none"',
#Returns number of lines added/removed
def revert_nocite_key(body, start, end):
- 'key "..." -> \nocite{...}'
+ 'key "..." -> \nocite{...}'
r = re.compile(r'^key "(.*)"')
i = start
j = end
subst = ['\\begin_layout Standard',
'\\begin_inset ERT',
'status collapsed', '',
- '\\begin_layout Standard', '', '',
+ '\\begin_layout Standard', '', '',
'\\backslash', '',
'end{sideways' + floattype + '}',
'\\end_layout', '', '\\end_inset']
document.body[j : j+1] = subst
addedLines = len(subst) - 1
del document.body[i+1 : l]
- addedLines -= (l-1) - (i+1)
+ addedLines -= (l-1) - (i+1)
subst = ['\\begin_inset ERT', 'status collapsed', '',
- '\\begin_layout Standard', '', '', '\\backslash',
- 'begin{sideways' + floattype + '}',
+ '\\begin_layout Standard', '', '', '\\backslash',
+ 'begin{sideways' + floattype + '}',
'\\end_layout', '', '\\end_inset', '',
'\\end_layout', '']
document.body[i : i+1] = subst
if l == -1:
document.warning("Malformed LyX document: Missing `\\begin_layout' in Float inset.")
return
- subst = ['\\begin_layout Standard', '\\begin_inset ERT',
- 'status collapsed', '',
+ subst = ['\\begin_layout Standard', '\\begin_inset ERT',
+ 'status collapsed', '',
'\\begin_layout Standard', '', '', '\\backslash',
- 'end{sideways' + floattype + '*}',
+ 'end{sideways' + floattype + '*}',
'\\end_layout', '', '\\end_inset']
document.body[j : j+1] = subst
addedLines = len(subst) - 1
revert_inset_embedding(document, 'External')
-# FIXME This code can still be cleaned up a fair bit.
def convert_subfig(document):
" Convert subfigures to subfloats. "
i = 0
continue
k = find_token(document.body, '\tsubcaption', i, endInset)
if k == -1:
- i += 1
+ i = endInset
continue
l = find_token(document.body, '\tsubcaptionText', i, endInset)
+ if l == -1:
+ document.warning("Malformed lyx document: Can't find subcaptionText!")
+ i = endInset
+ continue
caption = document.body[l][16:].strip('"')
- savestr = document.body[i]
- laststr = document.body[endInset]
del document.body[l]
del document.body[k]
addedLines = -2
- # savestr should no longer be needed here.
- subst = ['\\begin_inset Float figure', 'wide false', 'sideways false',
- 'status open', '', '\\begin_layout Plain Layout', '\\begin_inset Caption',
- '', '\\begin_layout Plain Layout',
- caption, '\\end_layout', '', '\\end_inset', '',
- '\\end_layout', '', '\\begin_layout Plain Layout', savestr]
- document.body[i : i+1] = subst
- addedLines += len(subst) - 1
+ subst = ['\\begin_inset Float figure', 'wide false', 'sideways false',
+ 'status open', '', '\\begin_layout Plain Layout', '\\begin_inset Caption',
+ '', '\\begin_layout Plain Layout'] + latex2lyx(caption) + \
+ [ '\\end_layout', '', '\\end_inset', '',
+ '\\end_layout', '', '\\begin_layout Plain Layout']
+ document.body[i : i] = subst
+ addedLines += len(subst)
endInset += addedLines
- # There should be an easier way to do this.
- subst = ['', '\\end_inset', '', '\\end_layout', laststr]
- document.body[endInset : endInset+1] = subst
- addedLines += len(subst) - 1
+ subst = ['', '\\end_inset', '', '\\end_layout']
+ document.body[endInset : endInset] = subst
+ addedLines += len(subst)
i += addedLines + 1
insertion = insertion.split('\n')
document.body[k : k + 1] = insertion
addedLines += len(insertion) - 1
- add_to_preamble(document,
- ['\\usepackage{subfig}\n'])
+ add_to_preamble(document, ['\\usepackage{subfig}\n'])
i += addedLines + 1
" Revert placement options wrap floats (wrapfig). "
i = 0
while True:
- i = find_token(document.body, "lines", i)
+ i = find_token(document.body, "\\begin_inset Wrap figure", i)
if i == -1:
return
- j = find_token(document.body, "placement", i+1)
- if j != i + 1:
+ e = find_end_of_inset(document.body, i)
+ j = find_token(document.body, "placement", i + 1, e)
+ if j == -1:
document.warning("Malformed LyX document: Couldn't find placement parameter of wrap float.")
- return
- document.body[j] = document.body[j].replace("placement O", "placement o")
- document.body[j] = document.body[j].replace("placement I", "placement i")
- document.body[j] = document.body[j].replace("placement L", "placement l")
- document.body[j] = document.body[j].replace("placement R", "placement r")
- i = i + 1
+ i += 1
+ continue
+ r = re.compile("placement (o|i|l|r)")
+ m = r.match(document.body[j])
+ if m == None:
+ document.warning("Malformed LyX document: Placement option isn't O|I|R|L!")
+ document.body[j] = "placement " + m.group(1).lower()
+ i = j
def remove_extra_embedded_files(document):
def convert_plain_layout(document):
- " Convert 'PlainLayout' to 'Plain Layout'"
+ " Convert 'PlainLayout' to 'Plain Layout'"
i = 0
while True:
i = find_token(document.body, '\\begin_layout PlainLayout', i)
def revert_plain_layout(document):
- " Convert 'PlainLayout' to 'Plain Layout'"
+ " Convert 'PlainLayout' to 'Plain Layout'"
i = 0
while True:
i = find_token(document.body, '\\begin_layout Plain Layout', i)
def revert_plainlayout(document):
- " Convert 'PlainLayout' to 'Plain Layout'"
+ " Convert 'PlainLayout' to 'Plain Layout'"
i = 0
while True:
i = find_token(document.body, '\\begin_layout PlainLayout', i)
j = j + 1
+def revert_removed_modules(document):
+ i = 0
+ while True:
+ i = find_token(document.header, "\\begin_remove_modules", i)
+ if i == -1:
+ return
+ j = find_end_of(document.header, i, "\\begin_remove_modules", "\\end_remove_modules")
+ if j == -1:
+ # this should not happen
+ break
+ document.header[i : j + 1] = []
+
+
+def add_plain_layout(document):
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_layout", i)
+ if i == -1:
+ return
+ if len(document.body[i].split()) == 1:
+ document.body[i] = "\\begin_layout Plain Layout"
+ i += 1
+
+
+def revert_tabulators(document):
+ "Revert tabulators to 4 spaces"
+ i = 0
+ while True:
+ i = find_token(document.body, "\t", i)
+ if i == -1:
+ return
+ document.body[i] = document.body[i].replace("\t", " ")
+ i += 1
+
+
+def revert_tabsize(document):
+ "Revert the tabsize parameter of listings"
+ i = 0
+ j = 0
+ while True:
+ # either it is the only parameter
+ i = find_token(document.body, 'lstparams "tabsize=4"', i)
+ if i != -1:
+ del document.body[i]
+ # or the last one
+ j = find_token(document.body, "lstparams", j)
+ if j == -1:
+ return
+ pos = document.body[j].find(",tabsize=")
+ document.body[j] = document.body[j][:pos] + '"'
+ i += 1
+ j += 1
+
+
+def revert_mongolian(document):
+ "Set language Mongolian to English"
+ i = 0
+ if document.language == "mongolian":
+ document.language = "english"
+ i = find_token(document.header, "\\language", 0)
+ if i != -1:
+ document.header[i] = "\\language english"
+ j = 0
+ while True:
+ j = find_token(document.body, "\\lang mongolian", j)
+ if j == -1:
+ return
+ document.body[j] = document.body[j].replace("\\lang mongolian", "\\lang english")
+ j = j + 1
+
+
+def revert_default_options(document):
+ ' Remove param use_default_options '
+ i = find_token(document.header, "\\use_default_options", 0)
+ if i != -1:
+ del document.header[i]
+
+
+def convert_default_options(document):
+ ' Add param use_default_options and set it to false '
+ i = find_token(document.header, "\\textclass", 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Missing `\\textclass'.")
+ return
+ document.header.insert(i, '\\use_default_options false')
+
+
##
# Conversion hub
#
[289, [convert_latexcommand_index]],
[290, []],
[291, []],
- [292, []],
+ [292, [convert_japanese_cjk]],
[293, []],
[294, [convert_pdf_options]],
[295, [convert_htmlurl, convert_url]],
[336, []],
[337, [convert_display_enum]],
[338, []],
+ [339, []],
+ [340, [add_plain_layout]],
+ [341, []],
+ [342, []],
+ [343, [convert_default_options]]
]
-revert = [[337, [revert_polytonicgreek]],
+revert = [[342, [revert_default_options]],
+ [341, [revert_mongolian]],
+ [340, [revert_tabulators, revert_tabsize]],
+ [339, []],
+ [338, [revert_removed_modules]],
+ [337, [revert_polytonicgreek]],
[336, [revert_display_enum]],
[335, [remove_fontsCJK]],
[334, [revert_InsetSpace]],
[294, [revert_href, revert_url]],
[293, [revert_pdf_options_2]],
[292, [revert_inset_info]],
- [291, [revert_japanese, revert_japanese_encoding]],
+ [291, [revert_japanese, revert_japanese_encoding, revert_japanese_cjk]],
[290, [revert_vietnamese]],
[289, [revert_wraptable]],
[288, [revert_latexcommand_index]],
projects / lyx.git / blobdiff