\setboolean{lettrine}{true}}
{\setboolean{lettrine}{false}}
+% check for diagbox
+\newboolean{diagbox}
+\IfFileExists{diagbox.sty}
+ {\usepackage{diagbox}
+ \setboolean{diagbox}{true}}
+ {\setboolean{diagbox}{false}}
+
% use normal list environments also in French documents
\frenchbsetup{StandardLayout}
\end_preamble
\begin_body
\begin_layout Title
-Manuel détaillé pour les Figures, les Tableaux, les Flottants, les Notes,
- les Boîtes et les Objets Externes de LyX
+Manuel détaillé pour les figures, les tableaux, les flottants, les notes,
+ les boîtes et les objets externes de LyX
\end_layout
\begin_layout Author
\end_layout
\begin_layout Plain Layout
-version 1.6.x janvier 2010
+version 2.0.x novembre 2011
\end_layout
\end_inset
\series default
,
\series bold
-lettrine, marginnote, picinpar
+diagbox, lettrine, marginnote, picinpar
\series default
, et
\series bold
\end_layout
\begin_layout Section
-La fenêtre de dialogue Graphique
+La fenêtre de dialogue graphique
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Section
-Figures Flottantes
+Figures flottantes
\begin_inset CommandInset label
LatexCommand label
name "sec:Figure-Floats"
\end_layout
\begin_layout Section
-Les Formats d'images
+Les formats d'images
\begin_inset CommandInset label
LatexCommand label
name "sec:Image-Formats"
\end_inset
-,
-\lang english
-
-\lang french
-chaque format pour la sortie du document ne va accepter qu'un petit nombre
+, chaque format pour la sortie du document ne va accepter qu'un petit nombre
de formats d'images.
Pour s'en sortir LyX utilise le programme
\family typewriter
en arrière plan pour convertir les formats que vous utilisez dans un des
formats acceptés par le format de sortie.
Ces conversions prenant forcément du temps, vous pouvez accélérer vos exportati
-ons en n'utilisant que les formats listés dans les sous sections de
-\lang english
-
-\lang french
-l'appendice
+ons en n'utilisant que les formats listés dans les sous sections de l'appendice
\begin_inset space ~
\end_inset
.
En fait vous pouvez convertir n'importe quel format matriciel en PDF ou
en EPS, mais le résultat ne sera pas redimensionnable.
- Dans ce cas seul une en-tête est réellement ajoutée à l'image initiale
+ Dans ce cas seul une en-tête est réellement ajoutée à l'image initiale.
\begin_inset Foot
-status open
+status collapsed
\begin_layout Plain Layout
Dans le cas du PDF l'image initiale est aussi compressée.
\end_inset
-.
+
\end_layout
\begin_layout Standard
\begin_layout Standard
En principe il est quasiment impossible de convertir une image matricielle
en graphique vectoriel, seul le contraire est possible.
-
-\lang english
-
-\lang french
-Seuls les formats d'image PDF et EPS peuvent être directement incorporés
+ Seuls les formats d'image PDF et EPS peuvent être directement incorporés
dans respectivement un fichier de sortie PDF ou PostScript.
Les images en SVG ou en WMF sont recalculées sous forme de bitmaps quand
la sortie est générée puisqu'il n'existe pas actuellement de convertisseurs
\begin_layout Section
La fenêtre
\family sans
-Tableau
+tableau
\family default
\begin_inset Index idx
\family default
supprime toutes les lignes autour de la cellule ou de la sélection de cellules
- courante- si la cellule courante n'est pas multi-colonnes cela affecte
+ courante - si la cellule courante n'est pas multi-colonnes cela affecte
aussi la colonne et la ligne courante
\end_layout
\family default
- transforme en multiligne la cellule ou la sélection courante
+ transforme en multi-ligne la cellule ou la sélection courante
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Section
-Le Menu Éditer Tableau
+Le menu éditer tableau
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Section
-Flottant de Tableau
+Flottant de tableau
\begin_inset CommandInset label
LatexCommand label
name "sec:Table-Floats"
\end_layout
\begin_layout Subsection
-Notes de Bas de Page dans les Tableaux Longs
+Notes de bas de page dans les tableaux longs
\begin_inset CommandInset label
LatexCommand label
name "sub:Notes-dans-tableau-long"
\end_layout
\begin_layout Subsection
-Alignement des Tableaux Longs
+Alignement des tableaux longs
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Subsection
-Légendes et Tableaux longs
+Légendes et tableaux longs
\begin_inset Index idx
status collapsed
\begin_layout Standard
Vous ne pouvez pas placer un tableau long dans un flottant de tableau puisque
les flottants ne peuvent pas être sur plusieurs pages, mais l'environnement
- de légende des flottants de tableau peut aussi être utilisé pour les Tableaux
- Longs quand on utilise pour une ligne l'option de tableau long
+ de légende des flottants de tableau peut aussi être utilisé pour les tableaux
+ longs quand on utilise pour une ligne l'option de tableau long
\family sans
Légende
\family default
\end_layout
\begin_layout Subsubsection
-Des Légendes différentes sur chaque page d'un tableau
+Des légendes différentes sur chaque page d'un tableau
\begin_inset Argument
status collapsed
\end_layout
\begin_layout Subsection
-Les Flottants et les Tableaux Longs
+Les flottants et les tableaux longs
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Subsubsection
-Les Bases des Multicolonnes
+Les bases des multi-colonnes
\end_layout
\begin_layout Standard
\begin_layout Standard
LyX gère directement les multi-colonnes, mais nous devons faire attention
- à la largeur des cellules couvertes par la cellule multicolonne.
+ à la largeur des cellules couvertes par la cellule multi-colonne.
\end_layout
\begin_layout Standard
\end_inset
-Tableau avec un texte centré dans une case multicolonne au-dessus de deux
+Tableau avec un texte centré dans une case multi-colonne au-dessus de deux
colonnes qui ont exactement la moitié de la largeur de la case multicolonne.
\begin_inset Argument
status open
\begin_inset Text
\begin_layout Plain Layout
-multicolonne sur plusieurs lignes
+multi-colonne sur plusieurs lignes
\end_layout
\end_inset
\emph default
dans la fenêtre de dialogue de tableau,
\emph on
-multicolonne
+multi-colonne
\emph default
,
\emph on
cm.
Les colonnes couvertes doivent avoir exactement la moitié de la largeur
- de la cellule multicolonne, vous devez donc donner une largeur de 1.25
+ de la cellule multi-colonne, vous devez donc donner une largeur de 1.25
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \thinspace{}
\end_inset
-cm (la largeur de la multicolonne moins la largeur de la première colonne).
+cm (la largeur de la multi-colonne moins la largeur de la première colonne).
C'est ce qui a été fait pour le tableau
\begin_inset space ~
\end_inset
\end_inset
Tableau où la largeur de colonnes couvertes n'est pas exactement la moitié
- de la largeur de la cellule multicolonne.
+ de la largeur de la cellule multi-colonne.
\begin_inset Argument
status open
\begin_layout Plain Layout
-Tableau avec multicolonne pas parfaite
+Tableau avec multi-colonne pas parfaite
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-multicolonne sur plusieurs lignes
+multi-colonne sur plusieurs lignes
\end_layout
\end_inset
\begin_layout Standard
Vous pouvez voir que la première colonne n'a pas la moitié de la largeur
- de la cellule multicolonne, elle est un peu plus large.
+ de la cellule multi-colonne, elle est un peu plus large.
La raison est que la taille que l'on donne à une cellule,
\begin_inset Formula $W_{g}$
\end_inset
\begin_layout Standard
Bien que nous ayons choisi un alignement centré pour le texte de la cellule
- multicolonne, il est toujours aligné à gauche.
+ multi-colonne, il est toujours aligné à gauche.
Cela vient du fait que LyX applique l'alignement seulement à des colonnes
isolées.
- Nous devons donc utiliser le paramètre LaTeX suivant pour la multicolonne
+ Nous devons donc utiliser le paramètre LaTeX suivant pour la multi-colonne
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-Voici un exemple de tableau avec une cellule multiligne en première colonne:
+Voici un exemple de tableau avec une cellule multi-ligne en première colonne:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-La largeur de la cellule multiligne est déterminée par la largeur de toute
+La largeur de la cellule multi-ligne est déterminée par la largeur de toute
la colonne.
L'
\family sans
\end_layout
\begin_layout Standard
-Voici un exemple de tableau avec une cellule multiligne alignée à droite
- avec un décalage vertical de of -4
+Voici un exemple de tableau avec une cellule multi-ligne alignée à droite
+ avec un décalage vertical de -4
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Standard
+Pour commencer une nouvelle ligne dans une cellule multi-ligne vous pouvez
+ utiliser un saut de ligne forcé (
+\begin_inset space ~
+\end_inset
-\lang english
-To start a new line in a multirow you can use a forced line break (shortcut
-
-\begin_inset Info
-type "shortcut"
-arg "newline-insert newline"
+raccourci
+\family sans
+Ctrl+Entrée
+\family default
+
+\begin_inset space ~
\end_inset
-) but this will not respect the cell lines as demonstrated in this table:
+) mais dans ce cas les limites de cellules ne seront pas respectées comme
+ on le voit dans ce tableau :
\end_layout
\begin_layout Standard
\noindent
\align center
-
-\lang english
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="2">
<features tabularvalignment="middle">
\begin_inset Text
\begin_layout Plain Layout
-
-\lang english
aaa
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-wrong cell
+mauvaise cellule
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
-\lang english
ccc
\end_layout
\begin_inset Text
\begin_layout Plain Layout
-
-\lang english
ddd
\end_layout
\begin_inset Text
\begin_layout Plain Layout
-
-\lang english
bbb
\end_layout
\begin_inset Text
\begin_layout Plain Layout
-
-\lang english
eee
\end_layout
\end_layout
\begin_layout Standard
+Vous devez donc faire attention avec les saut de lignes forcés.
+\end_layout
+
+\begin_layout Subsection
\lang english
-Therefore be careful with forced line breaks.
+Cells with diagonal line(s)
\end_layout
-\begin_layout Section
-Les Tableaux Formels
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Tableaux-Formels"
-
-\end_inset
+\begin_layout Standard
+\lang english
+To tell the reader what is meant by column and row headings in a table,
+ it is helpful to split the first cell of the table by one or two diagonal
+ lines.
+ This can be achieved by loading the LaTeX-package
+\series bold
+diagbox
+\series default
+\lang french
\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Tableau ! Formel
+Paquetages LaTeX ! diagbox
\end_layout
\end_inset
+
+\lang english
+in the document preamble.
+ The package provides the command
+\series bold
-\end_layout
-
-\begin_layout Standard
-Dans les livres les tableaux sont souvent mis en forme d'une façon semblable
- à celle du tableau
+\backslash
+diagbox
+\series default
+ that is inserted as TeX-Code and that can take 2 or 3
\begin_inset space ~
\end_inset
+arguments:
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Exemple-tableau-booktabs"
+\begin_layout Standard
-\end_inset
+\series bold
+\lang english
-.
- Ce genre de tableau est appelé
-\begin_inset Quotes eld
-\end_inset
+\backslash
+diagbox[options]{lower left}{upper right}
+\end_layout
+\begin_layout Standard
-\emph on
-formel
-\emph default
+\series bold
+\lang english
-\begin_inset Quotes erd
-\end_inset
+\backslash
+diagbox[options]{lower left}{upper left}{upper right}
+\end_layout
-.
- Pour transformer un tableau en tableau formel, utilisez l'option
-\family sans
-Formel
-\family default
- de l'onglet
-\family sans
-Bordures
-\family default
- de la fenêtre de dialogue
-\family sans
-Paramètres
-\begin_inset space ~
-\end_inset
+\begin_layout Standard
-du
+\lang english
+The first scheme divides the cell by a single diagonal line and the arguments
+ are placed below and above this line.
+ The second scheme divides the cell by 2
\begin_inset space ~
\end_inset
-tableau
-\family default
-.
+lines.
\end_layout
\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Exemple-tableau-booktabs"
-\end_inset
-Exemple de tableau formel
+\backslash
+ifdiagbox
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="8" columns="4">
-<features booktabs="true" tabularvalignment="middle">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_inset Note Note
+status open
\begin_layout Plain Layout
-Système
+La section suivante ne s'affichera que si vous avez installé le paquetage
+ LaTeX
+\series bold
+diagbox
+\series default
+.
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-Chip
-\begin_inset space \thinspace{}
-\end_inset
-1
\end_layout
-\end_inset
-</cell>
-<cell multicolumn="1" alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Chip
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Standard
-2
-\end_layout
+\lang english
+Here is an example table where
+\series bold
+\backslash
+diagbox
+\series default
+is used in the 2-argument scheme in the first cell:
+\begin_inset VSpace medskip
\end_inset
-</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
\end_layout
-\end_inset
-</cell>
-</row>
+\begin_layout Standard
+\noindent
+
+\lang english
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="4">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+
+\lang english
\begin_inset ERT
status collapsed
\backslash
-cmidrule(r){2-2}
+diagbox{
\end_layout
\end_inset
-
+Name
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
+}{
+\end_layout
-\backslash
-cmidrule(l){3-4}
+\end_inset
+
+Parameter
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
\end_inset
-Épaisseur du capteur en µm
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-300
+
+\lang english
+Thickness in nm
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-300
+
+\lang english
+Transparency in %
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-700
+
+\lang english
+Hardness in MPa
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Angle du biseau en °
+
+\lang english
+Perfect Green
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-3.55
+
+\lang english
+45
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-2.71
+
+\lang english
+80
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-7.99
+
+\lang english
+504
\end_layout
\end_inset
</cell>
</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Résolution spatiale en µm
+
+\lang english
+Dark Multi-P
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-4.26
+
+\lang english
+60
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-10.17
+
+\lang english
+72
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-10.56
+
+\lang english
+982
\end_layout
\end_inset
</cell>
</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-MTF à
-\begin_inset Formula $f_{\mathrm{max}}$
-\end_inset
-
+\lang english
+Crystal Clear Pro
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-0.53
+
+\lang english
+18
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-0.37
+
+\lang english
+86
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-0.39
+
+\lang english
+374
\end_layout
\end_inset
</cell>
</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset VSpace medskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+The 3-argument scheme is for example useful for cross-tables of sports leagues
+ or distances:
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+
+\lang english
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="4">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+
+\lang english
\begin_inset ERT
status collapsed
\backslash
-cmidrule(l{10pt}){1-1}
+diagbox{
\end_layout
\end_inset
-résolution spatiale LSF
+Team home
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Result
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Team away
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+\lang english
+Tigers
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+\lang english
+Panthers
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+\lang english
+Falcons
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-en µm
+
+\lang english
+Tigers
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-129.7
+
+\lang english
+---
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-52.75
+
+\lang english
+1:3
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-50.78
+
+\lang english
+0:1
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-en % de la taille des pixels
+
+\lang english
+Panthers
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-76.3
+
+\lang english
+3:1
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-95.9
+
+\lang english
+---
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-92.3
+
+\lang english
+0:0
\end_layout
\end_inset
</cell>
</row>
-</lyxtabular>
-
-\end_inset
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\lang english
+Falcons
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\lang english
+1:0
\end_layout
-\begin_layout Standard
-De l'espace vertical peut être ajouté entre les lignes en utilisant l'onglet
-
-\family sans
-Bordures
-\family default
- de la fenêtre de dialogue
-\family sans
-Paramètres
-\begin_inset space ~
-\end_inset
-
-du
-\begin_inset space ~
-\end_inset
-
-tableau
-\family default
- comme c'est décrit dans la section
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Espacement-lignes"
+\lang english
+0:0
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-.
+\begin_layout Plain Layout
+
+\lang english
+---
\end_layout
-\begin_layout Standard
-Au contraire des tableaux normaux, les tableaux formels n'ont pas de lignes
- verticales.
- Les lignes horizontales peuvent être mise en place comme pour les tableaux
- normaux mais elles apparaissent avec des épaisseurs différentes dans la
- sortie imprimée :
-\begin_inset Newline newline
\end_inset
+</cell>
+</row>
+</lyxtabular>
-La première et la dernière ligne ont implicitement une épaisseur de 0.08
-\begin_inset space \thinspace{}
\end_inset
-em alors que les autres lignes ont implicite une épaisseur de 0.05
-\begin_inset space \thinspace{}
-\end_inset
-em.
\end_layout
\begin_layout Standard
-Les épaisseurs prises implicitement peuvent être modifiées en utilisant
- les lignes de préambule suivantes :
+
+\lang english
+For larger cross-tables one might use split cells in 2 or every corner of
+ the table like in this example:
\end_layout
\begin_layout Standard
+\noindent
+\align center
-\series bold
+\lang english
+\begin_inset Tabular
+<lyxtabular version="3" rows="5" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-let
-\backslash
-mytoprule
-\backslash
-toprule
-\begin_inset Newline newline
-\end_inset
+\begin_layout Plain Layout
+
+\lang english
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
\backslash
-renewcommand{
-\backslash
-toprule}{
-\backslash
-mytoprule[width]}
+diagbox{
\end_layout
-\begin_layout Standard
+\end_inset
+
+Team home
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Result
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Team away
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Tigers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Panthers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Falcons
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox[dir=NE]{
+\end_layout
+
+\end_inset
+
+Team home
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Result
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Team away
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Tigers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+---
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+1:3
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+0:1
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Tigers
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Panthers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+3:1
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+---
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+0:0
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Panthers
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Falcons
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+1:0
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+0:0
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+---
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Falcons
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox[dir=SW]{
+\end_layout
+
+\end_inset
+
+Team home
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Result
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Team away
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Tigers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Panthers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Falcons
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox[dir=SE]{
+\end_layout
+
+\end_inset
+
+Team home
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Result
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Team away
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+To rotate the diagonal lines, the command option
+\series bold
+dir=direction
+\series default
+ is used.
+
+\emph on
+direction
+\emph default
+ is either
+\series bold
+NE
+\series default
+,
+\series bold
+DE
+\series default
+,
+\series bold
+SW
+\series default
+ or
+\series bold
+NW
+\series default
+ and represent a point of a compass.
+
+\series bold
+SW
+\series default
+ is for example the south-west corner.
+ Thus in the lower left cell of the above table the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+\lang english
+
+\backslash
+diagbox[dir=SW]{Team home}{Result}{Team away}
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+is used.
+ If no direction is given, it will be NW.
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+The necessary width of split cells is automatically calculated.
+ Thus if you set a fixed column width smaller than the calculated one, the
+ cell's content will protrude the cell borders:
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+
+\lang english
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="3cm">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox{
+\end_layout
+
+\end_inset
+
+Name
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Parameter
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Thickness in nm
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Perfect Green
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+45
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+If you need a certain width for columns with a split cell, use the command
+ option
+\series bold
+width=3cm
+\series default
+ (replace '3cm' by the width you need).
+ In the following table the width of the first column is set to 4
+\begin_inset space \thinspace{}
+\end_inset
+
+cm.
+ For
+\series bold
+
+\backslash
+diagbox
+\series default
+ a width of 4
+\begin_inset space \thinspace{}
+\end_inset
+
+cm + 2
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\backslash
+tabcolsep is necessary because the overall width is the width for the text
+ (in this case the 4
+\begin_inset space \thinspace{}
+\end_inset
+
+cm) plus two times the separation of the text and the cell border.
+ The calculation of the width cannot be done in the command option of
+\series bold
+
+\backslash
+diagbox
+\series default
+ so one needs to create a new length which can be used later.
+ This is done with the TeX-Code commands
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+newlength{
+\backslash
+diagtest}
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+setlength{
+\backslash
+diagtest}{4cm+2
+\backslash
+tabcolsep}
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+newlength{
+\backslash
+diagtest}
+\end_layout
+
+\begin_layout Plain Layout
+
+
+\backslash
+setlength{
+\backslash
+diagtest}{4cm+2
+\backslash
+tabcolsep}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+To enable calculations in LaTeX one needs to load the package
+\series bold
+calc
+\series default
+\lang french
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Paquetages LaTeX ! calc
+\end_layout
+
+\end_inset
+
+
+\lang english
+in the document preamble.
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+In this table you can now use the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+diagbox[width=
+\backslash
+diagtest]{A}{B}
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+in the first cell:
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+
+\lang english
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="4cm">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox[width=
+\backslash
+diagtest]{
+\end_layout
+
+\end_inset
+
+A
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+B
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Thickness in nm
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Perfect Green
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+45
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+Note that the split cell needs to be the widest one in the column.
+ Otherwise the length of the diagonal line cannot be calculated correctly
+ like in this table:
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+
+\lang english
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox{
+\end_layout
+
+\end_inset
+
+A
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+B
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Thickness in nm
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Perfect Green
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+45
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+In this case use the
+\series bold
+width
+\series default
+ option of the
+\series bold
+
+\backslash
+diagbox
+\series default
+ command.
+ It is then not necessary to add 2
+\backslash
+tabcolsep because the cell width is now the width of the column.
+ In this table a width of 3
+\begin_inset space \thinspace{}
+\end_inset
+
+cm is used:
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+
+\lang english
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox[width=3cm]{
+\end_layout
+
+\end_inset
+
+A
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+B
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Thickness in nm
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Perfect Green
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+45
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+For multiple text lines in split cells one needs some extra height to fit
+ the text to the cell.
+ This can be achieved with the
+\series bold
+
+\backslash
+diagbox
+\series default
+ option
+\series bold
+height=3cm
+\series default
+ (replace '3cm' by the height you need).
+ In the following table the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+diagbox[width=3cm,height=1.4cm]{A
+\backslash
+
+\backslash
+B}{C
+\backslash
+
+\backslash
+D}
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+is used in the first cell.
+ The command
+\series bold
+
+\backslash
+
+\backslash
+
+\series default
+ creates hereby the line break.
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+
+\lang english
+Breaking lines with
+\family sans
+Ctrl+Return
+\family default
+ is only possible when the column has a fixed width.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+
+\lang english
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox[width=3cm,height=1.4cm]{
+\end_layout
+
+\end_inset
+
+A
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+
+\backslash
+
+\end_layout
+
+\end_inset
+
+B
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+C
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+
+\backslash
+
+\end_layout
+
+\end_inset
+
+D
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Thickness in nm
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+Perfect Green
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\lang english
+45
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+else
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+Ce qui suit sera affiché si le paquetage LaTeX
+\series bold
+diagbox
+\series default
+ n'est pas installé :
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Vous devez installer le paquetage LaTeX
+\series bold
+diagbox
+\series default
+ pour voir le contenu des cette section dans la sortie imprimée.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fi
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+For more info about the LaTeX-package
+\series bold
+diagbox
+\series default
+, see its documentation
+\lang french
+,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "diagbox"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Section
+Les tableaux formels
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Tableaux-Formels"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Tableau ! Formel
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Dans les livres les tableaux sont souvent mis en forme d'une façon semblable
+ à celle du tableau
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Exemple-tableau-booktabs"
+
+\end_inset
+
+.
+ Ce genre de tableau est appelé
+\begin_inset Quotes fld
+\end_inset
+
+
+\emph on
+formel
+\emph default
+
+\begin_inset Quotes frd
+\end_inset
+
+.
+ Pour transformer un tableau en tableau formel, utilisez l'option
+\family sans
+Formel
+\family default
+ de l'onglet
+\family sans
+Bordures
+\family default
+ de la fenêtre de dialogue
+\family sans
+Paramètres
+\begin_inset space ~
+\end_inset
+
+du
+\begin_inset space ~
+\end_inset
+
+tableau
+\family default
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float table
+placement h
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Exemple-tableau-booktabs"
+
+\end_inset
+
+Exemple de tableau formel
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="8" columns="4">
+<features booktabs="true" tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+Système
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+Chip
+\begin_inset space \thinspace{}
+\end_inset
+
+1
+\end_layout
+
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+Chip
+\begin_inset space \thinspace{}
+\end_inset
+
+2
+\end_layout
+
+\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+cmidrule(r){2-2}
+\end_layout
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+cmidrule(l){3-4}
+\end_layout
+
+\end_inset
+
+Épaisseur du capteur en µm
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+300
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+300
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+700
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+Angle du biseau en °
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+3.55
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+2.71
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+7.99
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row topspace="default">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+Résolution spatiale en µm
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+4.26
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+10.17
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+10.56
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row topspace="default">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+MTF à
+\begin_inset Formula $f_{\mathrm{max}}$
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+0.53
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+0.37
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+0.39
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row topspace="default">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+cmidrule(l{10pt}){1-1}
+\end_layout
+
+\end_inset
+
+résolution spatiale LSF
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+en µm
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+129.7
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+52.75
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+50.78
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+en % de la taille des pixels
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+76.3
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+95.9
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+92.3
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+De l'espace vertical peut être ajouté entre les lignes en utilisant l'onglet
+
+\family sans
+Bordures
+\family default
+ de la fenêtre de dialogue
+\family sans
+Paramètres
+\begin_inset space ~
+\end_inset
+
+du
+\begin_inset space ~
+\end_inset
+
+tableau
+\family default
+ comme c'est décrit dans la section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Espacement-lignes"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+Au contraire des tableaux normaux, les tableaux formels n'ont pas de lignes
+ verticales.
+ Les lignes horizontales peuvent être mise en place comme pour les tableaux
+ normaux mais elles apparaissent avec des épaisseurs différentes dans la
+ sortie imprimée :
+\begin_inset Newline newline
+\end_inset
+
+La première et la dernière ligne ont implicitement une épaisseur de 0.08
+\begin_inset space \thinspace{}
+\end_inset
+
+em alors que les autres lignes ont implicite une épaisseur de 0.05
+\begin_inset space \thinspace{}
+\end_inset
+
+em.
+\end_layout
+
+\begin_layout Standard
+Les épaisseurs prises implicitement peuvent être modifiées en utilisant
+ les lignes de préambule suivantes :
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+let
+\backslash
+mytoprule
+\backslash
+toprule
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+renewcommand{
+\backslash
+toprule}{
+\backslash
+mytoprule[width]}
+\end_layout
+
+\begin_layout Standard
Cet exemple concerne la première ligne, appelée
\series bold
toprule
\begin_layout Standard
On peut aussi créer des lignes qui ne font pas toute la largeur du tableau
- en mettant une ligne pour une cellule multi colonne.
+ en mettant une ligne pour une cellule multi-colonne.
LyX va utiliser en interne la commande
\series bold
\end_layout
\begin_layout Section
-Alignement Vertical des Tableaux
+Alignement vertical des tableaux
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Section
-Tableaux Colorés
+Tableaux colorés
\begin_inset CommandInset label
LatexCommand label
name "sec:Tableaux-Colorés"
\end_layout
\begin_layout Subsection
-Cellules Colorées
+Cellules colorées
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Standard
-
-\lang english
-If you add the options
+Si vous ajoutez les options
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-
-\lang english
-to the document class options in the document settings, you can additionally
- use further 61
+aux options de la classe de document dans les paramètres du document, vous
+ pouvez utiliser 61
\begin_inset space ~
\end_inset
-colors.
- These colors are listed in appendix
+couleurs supplémentaires.
+ Ces couleurs sont listées dans l'appendice
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "chap:List-of-dvips-colornames"
+reference "chap:Liste-de-noms-de-couleur-dvips"
\end_inset
.
- One of these colors,
+ Une de ces couleurs,
\family sans
Maroon
\family default
-, is used as example in Table
-\lang french
-
+, est utilisée comme exemple dans le tableau
\begin_inset space ~
\end_inset
\begin_layout Labeling
\labelwidthstring 00.00.0000
-cmyk: cyan, magenta, jaune (yellow), noir (black)
+cmyk
+\begin_inset space ~
+\end_inset
+
+: cyan, magenta, jaune (yellow), noir (black)
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-rgb: red, vert (green), bleu (blue)
+rgb
+\begin_inset space ~
+\end_inset
+
+: rouge (red), vert (green), bleu (blue)
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-gray dégradé de gris (gray)
+gray
+\begin_inset space ~
+\end_inset
+
+: dégradé de gris (gray)
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Section
-Personnalisation des Tableaux
+
+\lang english
+Table Width Calculation
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Table-Width-Calculation"
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+For wide tables it is sometimes difficult to assure that the table does
+ not protrude over the page margin.
+ Setting a fixed width for every column of the table is the solution, but
+ what amount of space is needed for each column?
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+The table width
+\begin_inset Formula $W_{\mathrm{table}}$
+\end_inset
+
+ can be calculated: Every column has the width of the specified column width
+
+\begin_inset Formula $W_{\mathrm{column}}$
+\end_inset
+
+ (that the content of the column can consume) plus two times the separation
+ between the column content and the column border (LaTeX length
+\series bold
+
+\backslash
+tabcolsep
+\series default
+, default 6
+\begin_inset space \thinspace{}
+\end_inset
+
+pt) plus the width of a border line (LaTeX length
+\series bold
+
+\backslash
+arrayrulewidth
+\series default
+, default 0.4
+\begin_inset space \thinspace{}
+\end_inset
+
+pt): So if all
+\begin_inset Formula $n$
+\end_inset
+
+
+\begin_inset space ~
+\end_inset
+
+columns have the same width, the table width is
+\lang french
+
+\begin_inset Formula
+\begin{equation}
+W_{\mathrm{table}}=n\left(W_{\mathrm{column}}+2\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}\right)+\backslash\mbox{arrayrulewidth}
+\end{equation}
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+The available width for a table is the space between the page margins or
+ the width of a text column (for a two-column document) (LaTeX length
+\series bold
+
+\backslash
+columnwidth
+\series default
+).
+ If all table columns should have the same width and
+\begin_inset Formula $W_{\mathrm{table}}$
+\end_inset
+
+ should be 1
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\backslash
+columnwidth,
+\begin_inset Formula $W_{\mathrm{column}}$
+\end_inset
+
+ can easily be calculated.
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+To be able to perform calculations you need to load the LaTeX-package
+\series bold
+calc
+\series default
+\lang french
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Paquetages LaTeX ! calc
+\end_layout
+
+\end_inset
+
+
+\lang english
+ in the document preamble.
+ To set the width in the table dialog you have to use the field
+\family sans
+LaTeX argument
+\family default
+.
+ The command scheme for this field is the same that is explained in section
+\begin_inset space ~
+\end_inset
+
+
+\lang french
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Calculs-multicolonnes"
+
+\end_inset
+
+
+\lang english
+.
+ For a table with 5
+\begin_inset space \thinspace{}
+\end_inset
+
+columns with an uniform width and centered text, enter there for each column
+ the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+>{
+\backslash
+centering}p{(1
+\backslash
+columnwidth-62.4pt)/5}
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+For a table with 5
+\begin_inset space \thinspace{}
+\end_inset
+
+columns where 2 should have 0.75
+\begin_inset space ~
+\end_inset
+
+times the width than the 3 others, the calculation is
+\end_layout
+
+\begin_layout Standard
+\begin_inset Formula
+\begin{align}
+\backslash\mbox{columnwidth} & =3\, W_{\mathrm{column}}+2\cdot0.75\, W_{\mathrm{column}}+\backslash\mbox{arrayrulewidth}\nonumber \\
+ & \phantom{=\,}+5\left(2\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}\right)\nonumber \\
+ & =4.5\, W_{\mathrm{column}}+62.4\,\mathrm{pt}\nonumber \\
+W_{\mathrm{column}} & =\frac{\backslash\mbox{columnwidth}-62.4\,\mathrm{pt}}{4.5}
+\end{align}
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+In the table therefore the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+>{
+\backslash
+centering}p{(1
+\backslash
+columnwidth-62.4pt)/
+\backslash
+real{4.5}}
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+is used for the wider columns and
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+>{
+\backslash
+centering}p{(1
+\backslash
+columnwidth-62.4pt)/
+\backslash
+real{4.5}*
+\backslash
+real{0.75}}
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+for the smaller ones:
+\end_layout
+
+\begin_layout Standard
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}">
+<column alignment="center" valignment="top" width="0pt" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}*\real{0.75}}">
+<column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}">
+<column alignment="center" valignment="top" width="0pt" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}*\real{0.75}}">
+<column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+1
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+2
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+3
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+4
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+5
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+111111 1111111 111111 111111111 11111 11111 1111
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+2222 22222 222222 222222222 2222222 22 22222
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+333333 333333 333333 33333 3333333 333
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Section
+Personnalisation des tableaux
\begin_inset Index idx
status collapsed
\series default
en code TeX au debut d'une ligne du tableau.
Le tableau
-\lang english
-
\begin_inset space ~
\end_inset
\end_inset
-
-\lang french
montre l'effet de cette commande.
\end_layout
.
Ce tableau a été créé comme un tableau 4×2.
- L'en-tête est une cellule multicolonne centrée.
+ L'en-tête est une cellule multi-colonne centrée.
La première colonne est alignée à droite et contient la première partie
et inclue l'opérateur.
La seconde colonne contient le reste de la cellule aligné à gauche.
- Un petit espace a été ajouté au début de toutes les celleules de la deuxième
+ Un petit espace a été ajouté au début de toutes les cellules de la deuxième
colonne pour obtenir l'espace que l'on a d'habitude autour d'un opérateur.
Pour éviter l'espace qui est normalement placé entre deux colonnes d'un
tableau, le paramètre LaTeX suivant a été utilisé pour la deuxième colonne
\end_layout
\begin_layout Standard
-Calculer la largeur nécessaire pour des colonnes couvertes par un cellule
- multicolonne comme dans la section
+Calculer la largeur nécessaire pour colonnes normales comme dans la section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Table-Width-Calculation"
+
+\end_inset
+
+ et pour des colonnes couvertes par un cellule multi-colonne comme dans
+ la section
\begin_inset space ~
\end_inset
\end_inset
- peut devenir très pénible si vous avez plusieurs tableaux avec des cellules
- multicolonnes.
+ peut devenir très pénible si vous avez plusieurs tableaux.
Pour vous rendre la vie plus facile, vous pouvez définir dans le préambule
un format de cellule/colonne, qui puisse être utilisé dans tous les tableaux
du document.
\end_layout
\begin_layout Standard
-Pour de cellules multicolonnes centrées verticalement et horizontalement
+Pour de cellules multi-colonnes centrées verticalement et horizontalement
avec une largeur donnée, vous pouvez définir le format de cellule suivant
:
\end_layout
\begin_layout Standard
comme paramètre LaTeX dans la fenêtre de dialogue de tableau pour créer
- une multicolonne.
+ une multi-colonne.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-Pour les cellules qui sont couvertes par la cellule multicolonne, vous pouvez
- définir le format
+Pour les cellules qui sont couvertes par la cellule multi-colonne, vous
+ pouvez définir le format
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
-\series bold
-
-\backslash
-newcolumntype{S}[2]
+\series bold
+
+\backslash
+newcolumntype{S}[2]
+\end_layout
+
+\end_inset
+
+m{(#1+(2
+\backslash
+tabcolsep+
+\backslash
+arrayrulewidth)*(1-#2))/#2}}
+\end_layout
+
+\begin_layout Standard
+Ce format utilise l'équation
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand eqref
+reference "eq:Wgn"
+
+\end_inset
+
+ pour calculer la largeur que doit avoir chacune des cellules couverte par
+ la cellule multi-colonne pour qu'elles aient toutes la même largeur.
+\end_layout
+
+\begin_layout Standard
+Ensuite, vous pouvez entrer
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+S{largeur de la cellule multi-colonne}{nombre de colonnes couvertes}
+\end_layout
+
+\begin_layout Standard
+comme paramètre LaTeX de la colonne.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Pour des colonnes colorées, vous pouvez définir
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+newcolumntype{K}[1]{>{
+\backslash
+columncolor{#1}
+\backslash
+hspace{0pt}}c}
+\end_layout
+
+\begin_layout Standard
+Le
+\begin_inset Quotes eld
+\end_inset
+
+c
+\begin_inset Quotes erd
+\end_inset
+
+ à la fin crée une colonne de largeur variable dont le texte est centré
+ horizontalement.
+ Vous pouvez maintenant entrer
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+K{nom de couleur}
+\end_layout
+
+\begin_layout Standard
+comme paramètre LaTeX.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Pour créer le tableau
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Tableau-formats-personnalisés"
+
+\end_inset
+
+ utilisez les paramètres LaTeX
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+M{2.5cm}
+\end_layout
+
+\begin_layout Standard
+pour la première colonne et la multi-colonne,
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+K{red}
+\end_layout
+
+\begin_layout Standard
+pour la dernière colonne, et
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+S{2.5cm}{2}
+\end_layout
+
+\begin_layout Standard
+pour les cellules de la deuxième colonne.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float table
+placement h
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Tableau-formats-personnalisés"
+
+\end_inset
+
+Tableau utilisant des formats personnalisés
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="4">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="middle" width="2.5cm" special="M{2.5cm}">
+<column alignment="center" valignment="middle" width="0" special="S{2.5cm}{2}">
+<column alignment="center" valignment="middle" width="0">
+<column alignment="center" valignment="middle" width="0" special="K{red}">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+motTrèsLongDansUneCellule
+\end_layout
+
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none" special="M{2.5cm}">
+\begin_inset Text
+
+\begin_layout Plain Layout
+multi-colonne avec multi-ligne
+\end_layout
+
+\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+c
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+d
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+e
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+f
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+g
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+h
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+i
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+j
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+k
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Épaisseur des filets
+\begin_inset CommandInset label
+LatexCommand label
+name "sub:Epaisseur-filets"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Personnalisation des tableaux ! Épaisseur filets
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+L'épaisseur de tous les filets d'un tableau peut être modifiée avec la variable
+
+\series bold
+
+\backslash
+arrayrulewidth
+\series default
+.
+ Pour mettre, par exemple, une épaisseur de filet de 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+pt, comme pour le tableau
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Tableau-filets-1.5pt"
+
+\end_inset
+
+, insérez la commande
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+setlength{
+\backslash
+arrayrulewidth}{1.5pt}
+\end_layout
+
+\begin_layout Standard
+en code TeX avant le tableau ou le flottant de tableau.
+ La nouvelle épaisseur de filet reste valable pour tous les tableaux qui
+ suivent.
+ pour revenir aux valeurs implicites, mettez
+\series bold
+
+\backslash
+arrayrulewidth
+\series default
+ à 0.4
+\begin_inset space \thinspace{}
+\end_inset
+
+pt en utilisant du code LaTeX après le tableau ou le flottant de tableau.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+setlength{
+\backslash
+arrayrulewidth}{1.5pt}
+\end_layout
+
+\end_inset
+
+
+\begin_inset Float table
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Tableau-filets-1.5pt"
+
+\end_inset
+
+Tableau avec des filets de 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+pt
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+sd
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+sd
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
-m{(#1+(2
-\backslash
-tabcolsep+
-\backslash
-arrayrulewidth)*(1-#2))/#2}}
\end_layout
-\begin_layout Standard
-Ce format utilise l'équation
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand eqref
-reference "eq:Wgn"
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
- pour calculer la largeur que doit avoir chacune des cellules couverte par
- la cellule multicolonne pour qu'elles aient toutes la même largeur.
+\begin_layout Plain Layout
+sd
\end_layout
-\begin_layout Standard
-Ensuite, vous pouvez entrer
-\end_layout
+\end_inset
+</cell>
+</row>
+</lyxtabular>
-\begin_layout Standard
+\end_inset
-\series bold
-S{largeur de la cellule multicolonne}{nombre de colonnes couvertes}
-\end_layout
-\begin_layout Standard
-comme paramètre LaTeX de la colonne.
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-\end_layout
-
-\begin_layout Standard
-Pour des colonnes colorées, vous pouvez définir
-\end_layout
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
+\begin_layout Plain Layout
-\series bold
\backslash
-newcolumntype{K}[1]{>{
-\backslash
-columncolor{#1}
+setlength{
\backslash
-hspace{0pt}}c}
+arrayrulewidth}{0.4pt}
\end_layout
-\begin_layout Standard
-Le
-\begin_inset Quotes eld
-\end_inset
-
-c
-\begin_inset Quotes erd
\end_inset
- à la fin crée une colonne de largeur variable dont le texte est centré
- horizontalement.
- Vous pouvez maintenant entrer
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-K{nom de couleur}
-\end_layout
-\begin_layout Standard
-comme paramètre LaTeX.
\end_layout
\begin_layout Standard
\begin_inset VSpace bigskip
\end_inset
+Pour que seuls les filets horizontaux aient une épaisseur de 1.5
+\begin_inset space \thinspace{}
+\end_inset
-\end_layout
-
-\begin_layout Standard
-Pour créer le tableau
+pt, comme dans le tableau
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Tableau-formats-personnalisés"
+reference "tab:Tableau-filets-horizontaux-1.5pt"
\end_inset
- utilisez les paramètres LaTeX
+, insérez les commandes suivantes en code TeX avant le tableau ou le flottant
+ de tableau :
\end_layout
\begin_layout Standard
\series bold
-M{2.5cm}
+
+\backslash
+let
+\backslash
+myHline
+\backslash
+hline
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+renewcommand{
+\backslash
+hline}
+\begin_inset Newline newline
+\end_inset
+
+ {
+\backslash
+noalign{
+\backslash
+global
+\backslash
+arrayrulewidth 1.5pt}
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+myHline
+\backslash
+noalign{
+\backslash
+global
+\backslash
+arrayrulewidth 0.4pt}}
\end_layout
\begin_layout Standard
-pour la première colonne et la multicolonne,
+Pour revenir à l'épaisseur de filet implicite, insérez les commandes suivantes
+ en code TeX après le tableau ou le flottant de tableau :
\end_layout
\begin_layout Standard
\series bold
-K{red}
+
+\backslash
+renewcommand{
+\backslash
+hline}{
+\backslash
+myHline}
\end_layout
\begin_layout Standard
-pour la dernière colonne, et
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+let
+\backslash
+myHline
+\backslash
+hline
\end_layout
-\begin_layout Standard
+\begin_layout Plain Layout
-\series bold
-S{2.5cm}{2}
+
+\backslash
+renewcommand{
+\backslash
+hline}
\end_layout
-\begin_layout Standard
-pour les cellules de la deuxième colonne.
+\begin_layout Plain Layout
+
+ {
+\backslash
+noalign{
+\backslash
+global
+\backslash
+arrayrulewidth 1.5pt}
\end_layout
-\begin_layout Standard
+\begin_layout Plain Layout
+
+
+\backslash
+myHline
+\backslash
+noalign{
+\backslash
+global
+\backslash
+arrayrulewidth 0.4pt}}
+\end_layout
+
+\end_inset
+
+
\begin_inset Float table
-placement h
wide false
sideways false
status open
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Tableau-formats-personnalisés"
+name "tab:Tableau-filets-horizontaux-1.5pt"
\end_inset
-Tableau utilisant des formats personnalisés
+Tableau avec des filets horizontaux de 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+pt
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="4">
+<lyxtabular version="3" rows="3" columns="3">
<features tabularvalignment="middle">
-<column alignment="center" valignment="middle" width="2.5cm" special="M{2.5cm}">
-<column alignment="center" valignment="middle" width="0" special="S{2.5cm}{2}">
-<column alignment="center" valignment="middle" width="0">
-<column alignment="center" valignment="middle" width="0" special="K{red}">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-motTrèsLongDansUneCellule
-\end_layout
-
-\end_inset
-</cell>
-<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none" special="M{2.5cm}">
-\begin_inset Text
-
-\begin_layout Plain Layout
-multicolonne avec multiligne
+sd
\end_layout
\end_inset
</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\begin_inset Text
\begin_layout Plain Layout
-c
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-d
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-e
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-f
+sd
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-g
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-h
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-i
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-j
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-k
+sd
\end_layout
\end_inset
\end_inset
-\end_layout
-
-\begin_layout Subsection
-Épaisseur des filets
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Epaisseur-filets"
-
-\end_inset
-
-
-\begin_inset Index idx
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Personnalisation des tableaux ! Épaisseur filets
+
+
+\backslash
+renewcommand{
+\backslash
+hline}{
+\backslash
+myHline}
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-L'épaisseur de tous les filets d'un tableau peut être modifiée avec la variable
-
-\series bold
+\begin_inset VSpace bigskip
+\end_inset
-\backslash
-arrayrulewidth
-\series default
-.
- Pour mettre, par exemple, une épaisseur de filet de 1.5
+Pour que seuls les filets verticaux aient une épaisseur de 1.5
\begin_inset space \thinspace{}
\end_inset
-pt, comme pour le tableau
+pt, créez le format de colonne suivant dans le préambule, en suivant la
+ description de la section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Tableau-filets-1.5pt"
+reference "sub:Formats-personnalisés"
\end_inset
-, insérez la commande
+:
\end_layout
\begin_layout Standard
\series bold
\backslash
-setlength{
+newcolumntype{V}{!{
\backslash
-arrayrulewidth}{1.5pt}
+vrule width 1.5pt}}
\end_layout
\begin_layout Standard
-en code TeX avant le tableau ou le flottant de tableau.
- La nouvelle épaisseur de filet reste valable pour tous les tableaux qui
- suivent.
- pour revenir aux valeurs implicites, mettez
-\series bold
+Pour le tableau
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Tableau-filets-verticaux-1.5pt"
-\backslash
-arrayrulewidth
-\series default
- à 0.4
-\begin_inset space \thinspace{}
\end_inset
-pt en utilisant du code LaTeX après le tableau ou le flottant de tableau.
+ le paramètre LaTeX
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+\series bold
+VcV
+\end_layout
-\backslash
-setlength{
-\backslash
-arrayrulewidth}{1.5pt}
+\begin_layout Standard
+a été utilisé pour la dernière colonne et
\end_layout
-\end_inset
+\begin_layout Standard
+
+\series bold
+Vc
+\end_layout
+\begin_layout Standard
+pour les autres colonnes.
+\end_layout
+\begin_layout Standard
\begin_inset Float table
wide false
sideways false
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Tableau-filets-1.5pt"
+name "tab:Tableau-filets-verticaux-1.5pt"
\end_inset
-Tableau avec des filets de 1.5
+Tableau avec des filets verticaux de 1.5
\begin_inset space \thinspace{}
\end_inset
-pt
+pt
\end_layout
\end_inset
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
<features tabularvalignment="middle">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0" special="Vc">
+<column alignment="center" valignment="top" width="0" special="Vc">
+<column alignment="center" valignment="top" width="0" special="VcV">
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
+\end_layout
+
+\begin_layout Subsection
+Filets à traits interrompus
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Personnalisation des tableaux ! Filets à traits interrompus
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
\begin_inset ERT
status collapsed
\backslash
-setlength{
-\backslash
-arrayrulewidth}{0.4pt}
+ifarydshln
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+La section suivante ne s'affichera que si vous avez installé le paquetage
+ LaTeX
+\series bold
+arydshln
+\series default
+.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
+\begin_inset Float table
+placement H
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Tableau-filets-tirets"
-Pour que seuls les filets horizontaux aient une épaisseur de 1.5
-\begin_inset space \thinspace{}
\end_inset
-pt, comme dans le tableau
-\begin_inset space ~
+Tableau avec des filets à traits interrompus
+\end_layout
+
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Tableau-filets-horizontaux-1.5pt"
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="5" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0" special=":c">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+a
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-, insérez les commandes suivantes en code TeX avant le tableau ou le flottant
- de tableau :
+\begin_layout Plain Layout
+b
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+\begin_inset Text
-\series bold
+\begin_layout Plain Layout
+c
+\end_layout
-\backslash
-let
-\backslash
-myHline
-\backslash
-hline
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+d
+\end_layout
-\backslash
-renewcommand{
-\backslash
-hline}
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+e
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+f
+\end_layout
- {
-\backslash
-noalign{
-\backslash
-global
-\backslash
-arrayrulewidth 1.5pt}
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
-\backslash
-myHline
-\backslash
-noalign{
-\backslash
-global
-\backslash
-arrayrulewidth 0.4pt}}
+\begin_layout Plain Layout
+g
\end_layout
-\begin_layout Standard
-Pour revenir à l'épaisseur de filet implicite, insérez les commandes suivantes
- en code TeX après le tableau ou le flottant de tableau :
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+h
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\series bold
+\begin_layout Plain Layout
+i
+\end_layout
-\backslash
-renewcommand{
-\backslash
-hline}{
-\backslash
-myHline}
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+j
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-let
-\backslash
-myHline
-\backslash
-hline
+hdashline
\end_layout
-\begin_layout Plain Layout
-
+\end_inset
-\backslash
-renewcommand{
-\backslash
-hline}
+k
\end_layout
-\begin_layout Plain Layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
- {
-\backslash
-noalign{
-\backslash
-global
-\backslash
-arrayrulewidth 1.5pt}
+\begin_layout Plain Layout
+l
\end_layout
-\begin_layout Plain Layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-
-\backslash
-myHline
-\backslash
-noalign{
-\backslash
-global
-\backslash
-arrayrulewidth 0.4pt}}
+\begin_layout Plain Layout
+m
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+n
+\end_layout
-\begin_inset Float table
-wide false
-sideways false
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+o
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Tableau-filets-horizontaux-1.5pt"
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
-Tableau avec des filets horizontaux de 1.5
-\begin_inset space \thinspace{}
-\end_inset
-pt
+\backslash
+cdashline{4-5}
\end_layout
\end_inset
-
+p
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features tabularvalignment="middle">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
+\end_inset
+</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+q
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none" special="c:">
\begin_inset Text
\begin_layout Plain Layout
-
+r
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell multicolumn="1" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+s
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+t
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+u
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+v
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
+w
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-sd
+x
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
+\end_layout
+
+\begin_layout Standard
+LyX ne gère pas de façon native les filets à lignes interrompues, vous devez
+ donc employer du code TeX.
+ Mais avant il faut charger le paquetage LaTeX
+\series bold
+arydshln
+\series default
+
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
+Paquetages LaTeX ! arydshln
+\end_layout
+\end_inset
-\backslash
-renewcommand{
-\backslash
-hline}{
-\backslash
-myHline}
+ dans le préambule du document avec la commande
\end_layout
-\end_inset
+\begin_layout Standard
+\series bold
+\backslash
+usepackage{arydshln}
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-Pour que seuls les filets verticaux aient une épaisseur de 1.5
-\begin_inset space \thinspace{}
+Pour faire un filet vertical avec un trait interrompu, mettez deux points
+
+\begin_inset Quotes eld
\end_inset
-pt, créez le format de colonne suivant dans le préambule, en suivant la
- description de la section
-\begin_inset space ~
+:
+\begin_inset Quotes erd
\end_inset
+ avec le caractère décrivant l'alignement horizontal comme paramètre LaTeX
+ dans la fenêtre de dialogue de paramètre du tableau.
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Formats-personnalisés"
-
-\end_inset
-
-:
+\begin_layout Standard
+Pour un trait horizontal interrompu, ajoutez la commande
\end_layout
\begin_layout Standard
\series bold
\backslash
-newcolumntype{V}{!{
-\backslash
-vrule width 1.5pt}}
+hdashline
\end_layout
\begin_layout Standard
-Pour le tableau
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Tableau-filets-verticaux-1.5pt"
-
-\end_inset
+en code TeX comme premier élément de la première cellule de la ligne de
+ tableau.
+\end_layout
- le paramètre LaTeX
+\begin_layout Standard
+Pour des filets interrompus avec des cellules multi-colonnes, utilisez la
+ commande
\end_layout
\begin_layout Standard
\series bold
-VcV
+
+\backslash
+cdashline{
+\series default
+numéros de colonnes}
\end_layout
\begin_layout Standard
-a été utilisé pour la dernière colonne et
+en code TeX comme premier élément de la première cellule de la ligne.
+ Si par exemple, vous avez une cellule multi-colonne qui couvre les colonnes
+ 2 à 4 et que vous voulez un filet interrompu au dessus, ajoutez la commande
\end_layout
\begin_layout Standard
\series bold
-Vc
+
+\backslash
+cdashline{2-4}
\end_layout
\begin_layout Standard
-pour les autres colonnes.
+comme premier élément de la première cellule de la ligne contenant la multi-colo
+nne.
\end_layout
\begin_layout Standard
-\begin_inset Float table
-wide false
-sideways false
-status open
+\begin_inset VSpace bigskip
+\end_inset
-\begin_layout Plain Layout
-\begin_inset Caption
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Tableau-filets-verticaux-1.5pt"
+\end_layout
+\begin_layout Standard
+Le tableau
+\begin_inset space ~
\end_inset
-Tableau avec des filets verticaux de 1.5
-\begin_inset space \thinspace{}
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Tableau-filets-tirets"
+
\end_inset
-pt
-\end_layout
+ a été créé en utilisant
+\begin_inset Quotes eld
+\end_inset
+
+
+\series bold
+:c
+\series default
+\begin_inset Quotes erd
\end_inset
+ comme paramètre LaTeX pour la troisième colonne.
+ La commande en code TeX
+\series bold
+
+\backslash
+hdashline
+\series default
+ a été insérée dans la première cellule de la troisième ligne et la commande
+ en code TeX
+\series bold
+\backslash
+cdashline{4-5}
+\series default
+ a été insérée dans la première cellule de la quatrième ligne.
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features tabularvalignment="middle">
-<column alignment="center" valignment="top" width="0" special="Vc">
-<column alignment="center" valignment="top" width="0" special="Vc">
-<column alignment="center" valignment="top" width="0" special="VcV">
-<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
-\begin_layout Plain Layout
-sd
\end_layout
+\begin_layout Standard
+
+\lang english
+Tables with dashed lines can also be colored as shown by
+\lang french
+ tableau
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Colored-table-with"
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
+
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
+
+\backslash
+setlength{
+\backslash
+arrayrulewidth}{1pt}
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
+
+
+\lang english
+
+\begin_inset Note Note
+status collapsed
\begin_layout Plain Layout
+\lang english
+thicker lines for better visualization of the line color
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-sd
+
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
+
+\backslash
+dashgapcolor{green}
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
+
+
+\lang english
+
+\begin_inset Note Note
+status collapsed
\begin_layout Plain Layout
+\lang english
+color gaps between dashes green
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-sd
+
+
+\backslash
+let
+\backslash
+myHdashline
+\backslash
+hdashline
\end_layout
-\end_inset
-</cell>
-</row>
-</lyxtabular>
+\begin_layout Plain Layout
-\end_inset
+\backslash
+renewcommand{
+\backslash
+hdashline}
+\end_layout
+
+\begin_layout Plain Layout
+ {
+\backslash
+arrayrulecolor{red}
+\backslash
+myHdashline
+\backslash
+arrayrulecolor{black}}
\end_layout
\end_inset
-\end_layout
+\lang english
-\begin_layout Subsection
-Filets à traits interrompus
-\begin_inset Index idx
+\begin_inset Note Note
status collapsed
\begin_layout Plain Layout
-Personnalisation des tableaux ! Filets à traits interrompus
+
+\lang english
+color horizontal, dashed lines red
\end_layout
\end_inset
\backslash
-ifarydshln
+let
+\backslash
+myCdashline
+\backslash
+cdashline
+\end_layout
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+cdashline}[1]
+\end_layout
+
+\begin_layout Plain Layout
+
+ {
+\backslash
+arrayrulecolor{yellow}
+\backslash
+myCdashline{#1}
+\backslash
+arrayrulecolor{black}}
\end_layout
\end_inset
+\lang english
+
\begin_inset Note Note
-status open
+status collapsed
\begin_layout Plain Layout
-La section suivante ne s'affichera que si vous avez installé le paquetage
- LaTeX
-\series bold
-arydshln
-\series default
-.
+
+\lang english
+color partial horizontal, dashed lines yellow
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float table
-placement H
+placement h
wide false
sideways false
status open
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Tableau-filets-tirets"
+name "tab:Colored-table-with"
\end_inset
-Tableau avec des filets à traits interrompus
+
+\lang english
+Colored table with dashed lines
\end_layout
\end_inset
\begin_inset Tabular
<lyxtabular version="3" rows="5" columns="5">
<features tabularvalignment="middle">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0" special=":c">
+<column alignment="center" valignment="top" width="0pt" special=">{\columncolor{darkgreen}\centering}c">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt" special=":c">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+rowcolor{Gray}
+\end_layout
+
+\end_inset
+
k
\end_layout
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none" special="c:">
+<cell multicolumn="1" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\begin_inset Text
\begin_layout Plain Layout
-x
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+cellcolor{Maroon}
+\end_layout
+
+\end_inset
+
+i
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-LyX ne gère pas de façon native les filets à lignes interrompues, vous devez
- donc employer du code TeX.
- Mais avant il faut charger le paquetage LaTeX
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+hdashline}{
+\backslash
+myHdashline}
+\end_layout
+
+\end_inset
+
+
+\lang english
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+
+\lang english
+reset to default
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+cdashline}{
+\backslash
+myCdashline}
+\end_layout
+
+\end_inset
+
+
+\lang english
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+
+\lang english
+reset to default
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+nodashgapcolor
+\end_layout
+
+\end_inset
+
+
+\lang english
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+
+\lang english
+reset to default
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+setlength{
+\backslash
+arrayrulewidth}{0.4pt}
+\end_layout
+
+\end_inset
+
+
+\lang english
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+
+\lang english
+reset to default
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\lang english
+The coloring of lines, columns and lines works as decribed in section
+\begin_inset space ~
+\end_inset
+
+
+\lang french
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Tableaux-Colorés"
+
+\end_inset
+
+
+\lang english
+.
+ Coloring horizontal lines works analogically as described there as well,
+ one only needs to replace in the commands
\series bold
-arydshln
+
+\backslash
+myHlineC
\series default
+ by
+\series bold
-\begin_inset Index idx
-status collapsed
+\backslash
+myHdashline
+\series default
+ and
+\backslash
+
+\series bold
+hline
+\series default
+ by
+\series bold
+
+\backslash
+hdashline
+\series default
+; so one uses the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+let
+\backslash
+myHdashline
+\backslash
+hdashline
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+renewcommand{
+\backslash
+hdashline}
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
-Paquetages LaTeX ! arydshln
+\begin_inset space ~
+\end_inset
+
+
\end_layout
\end_inset
- dans le préambule du document avec la commande
+{
+\backslash
+arrayrulecolor{red}
+\backslash
+myHdashline
+\backslash
+arrayrulecolor{black}}
\end_layout
\begin_layout Standard
+\lang english
+To color
\series bold
\backslash
-usepackage{arydshln}
+cdashline
+\series default
+, the command is
\end_layout
\begin_layout Standard
-Pour faire un filet vertical avec un trait interrompu, mettez deux points
-
-\begin_inset Quotes eld
+
+\series bold
+
+\backslash
+let
+\backslash
+myCdashline
+\backslash
+cdashline
+\begin_inset Newline newline
\end_inset
-:
-\begin_inset Quotes erd
+
+\backslash
+renewcommand{
+\backslash
+cdashline}[1]
+\begin_inset Newline newline
\end_inset
- avec le caractère décrivant l'alignement horizontal comme paramètre LaTeX
- dans la fenêtre de dialogue de paramètre du tableau.
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+{
+\backslash
+arrayrulecolor{red}
+\backslash
+myCdashline{#1}
+\backslash
+arrayrulecolor{black}}
\end_layout
\begin_layout Standard
-Pour un trait horizontal interrompu, ajoutez la commande
+
+\lang english
+To get back the black line color, one needs to insert the following commands
+ as TeX-Code behind the table:
\end_layout
\begin_layout Standard
+\lang english
+For
\series bold
\backslash
\end_layout
\begin_layout Standard
-en code TeX comme premier élément de la première cellule de la ligne de
- tableau.
+
+\series bold
+
+\backslash
+renewcommand{
+\backslash
+hdashline}{
+\backslash
+myHdashline}
\end_layout
\begin_layout Standard
-Pour des filets interrompus avec des cellules multicolonnes, utilisez la
- commande
+
+\lang english
+and for
+\series bold
+
+\backslash
+cdashline
\end_layout
\begin_layout Standard
\series bold
\backslash
-cdashline{
-\series default
-numéros de colonnes}
+renewcommand{
+\backslash
+cdashline}{
+\backslash
+myCdashline}
\end_layout
\begin_layout Standard
-en code TeX comme premier élément de la première cellule de la ligne.
- Si par exemple, vous avez une cellule multicolonne qui couvre les colonnes
- 2 à 4 et que vous voulez un filet interrompu au dessus, ajoutez la commande
+
+\lang english
+To color the gaps between the dashes the command
\end_layout
\begin_layout Standard
\series bold
+\lang english
\backslash
-cdashline{2-4}
+dashgapcolor{color}
\end_layout
\begin_layout Standard
-comme premier élément de la première cellule de la ligne contenant la multicolon
-ne.
+
+\lang english
+can be used in front of a table as TeX-Code.
+ color is hereby the name of a defined color.
+ The command
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
+\series bold
+\backslash
+nodashgapcolor
\end_layout
\begin_layout Standard
-Le tableau
-\begin_inset space ~
-\end_inset
+\lang english
+unsets the changes made by
+\series bold
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Tableau-filets-tirets"
+\backslash
+dashgapcolor
+\series default
+.
+\end_layout
-\end_inset
+\begin_layout Standard
- a été créé en utilisant
-\begin_inset Quotes eld
-\end_inset
+\lang english
+\begin_inset Note Greyedout
+status open
+\begin_layout Plain Layout
\series bold
-:c
+\color none
+\lang english
+Note
\series default
+: If there are multiple commands in a cell, the command of
+\series bold
+arydshln
+\series default
+ needs to be the first one in the cell.
+ Therefore in cell
+\emph on
+k
+\emph default
+ of Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Colored-table-with"
-\begin_inset Quotes erd
\end_inset
- comme paramètre LaTeX pour la troisième colonne.
- La commande en code TeX
+ the command
\series bold
\backslash
hdashline
\series default
- a été insérée dans la première cellule de la troisième ligne et la commande
- en code TeX
+ is before
\series bold
\backslash
-cdashline{4-5}
+rowcolor
\series default
- a été insérée dans la première cellule de la quatrième ligne.
+.
+\end_layout
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
+
+\lang english
\begin_inset Note Greyedout
status open
\begin_layout Plain Layout
\series bold
+\color none
+\lang english
Note:
\series default
- Le paquetage LaTeX
+ The LaTeX-package
\series bold
arydshln
\series default
- qui a été utilisé n'est apparemment pas compatible avec le paquetage LaTeX
+ must be loaded in the document preamble before the LaTeX-package
+\lang french
\series bold
colortbl
\series default
+\color inherit
\begin_inset Index idx
status collapsed
\end_inset
- qui est utilisé pour avoir des tableaux colorés dans la section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Tableaux-Colorés"
-
-\end_inset
+\color none
.
- Cela signifie que les tableaux colorés ne peuvent pas avoir de filets à
- traits interrompus.
\end_layout
\end_inset
\end_layout
+\begin_layout Standard
+
+\lang english
+For more information about dashed lines see the documentation of
+\lang french
+
+\series bold
+arydshln
+\series default
+,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "arydshln"
+
+\end_inset
+
+.
+\end_layout
+
\begin_layout Chapter
Flottants
\begin_inset CommandInset label
\end_layout
\begin_layout Section
-Les Types de Flottants
+Les types de flottants
\end_layout
\begin_layout Standard
Enrobage
\family default
.
-
-\lang english
-The latter are explained in sec.
-\lang french
-
+ Ces derniers sont expliques dans la section
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Standard
-Les flottant sont soit numérotés indépendemment des sections dans lesquelles
+Les flottant sont soit numérotés indépendamment des sections dans lesquelles
ils se trouvent, soit en utilisant un format du genre
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Section
-Faire Référence à des Flottants
+Faire référence à des flottants
\begin_inset CommandInset label
LatexCommand label
name "sec:Referencer-les-Flottants"
\family default
de la barre d'outils.
+ La fenêtre de référence croisée va s'ouvrir et montrer toutes les étiquettes
+ définies dans votre document.
+ Si vous avez plusieurs documents LyX ouverts, vous pouvez choisir celui
+ que vous voulez utiliser avec la liste déroulante qui se trouve en haut
+ de la fenêtre de dialogue.
+ Vous pouvez trier les étiquettes par ordre alphabétique et ensuite en choisir
+ une.
Une boîte grise de référence croisée comme celle-ci :
\begin_inset Graphics
filename ../clipart/referenceQt4.png
\end_inset
- va être insérée et la fenêtre de référence croisée va s'ouvrir et montrer
- toutes les étiquettes définies dans votre document.
- Si vous avez plusieurs documents LyX ouverts, vous pouvez choisir celui
- que vous voulez utiliser avec la liste déroulante qui se trouve en haut
- de la fenêtre de dialogue.
- Vous pouvez trier les étiquettes par ordre alphabétique et ensuite en choisir
- une.
+ va être insérée.
Dans la sortie imprimée, le numéro du flottant apparaîtra à la position
de la référence croisée.
\end_layout
Revenir
\family default
et vous pouvez l'utiliser pour remettre le curseur sur la référence croisée.
- Si vous faites un clic droit sur la boîte d'une référence croisée, le curseur
- est aussi placé devant l'étiquette concernée, mais vous ne pouvez pas revenir
- à votre point de départ.
\end_layout
\begin_layout Subsection
-Formats de Références Croisées
+Formats de références croisées
\begin_inset CommandInset label
LatexCommand label
name "sub:Formats-Références-Croisées"
\begin_inset Newline newline
\end_inset
-Pour plus d'information sur le format, jetez un oeil dur la documentation
+Pour plus d'information sur le format, jetez un œil sur la documentation
du paquetage,
\begin_inset CommandInset citation
LatexCommand cite
\end_inset
- est recommendée parce que
+ est recommandée parce que
\series bold
prettyref
\series default
\backslash
addto
\backslash
-extrasenglish{
+extrasfrench{
\backslash
renewcommand{
\backslash
\end_layout
\begin_layout Standard
-Si vous utilisez une autre langue que l'anglais, remplacez
+Si vous utilisez une autre langue que le français, remplacez
\series bold
\backslash
-extrasenglish
+extrasfrench
\series default
par
\series bold
\series bold
-\backslash
-newlength{
-\backslash
-abc}
-\begin_inset Newline newline
-\end_inset
-
-
-\backslash
-settowidth{
-\backslash
-abc}{
-\backslash
-space}
-\begin_inset Newline newline
-\end_inset
-
-
\backslash
addto
\backslash
-extrasenglish{
-\backslash
-renewcommand{
-\backslash
-equationautorefname}
-\begin_inset Newline newline
-\end_inset
-
-
-\begin_inset Phantom HPhantom
-status open
-
-\begin_layout Plain Layout
-
-\series bold
-\begin_inset space ~
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-{
+extrasfrench{
\backslash
-hspace{-
+renewcommand*{
\backslash
-abc}}
+equationautorefname}[1]{}}
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Subsection
-Positionnement des Références
+Positionnement des références
\begin_inset CommandInset label
LatexCommand label
name "sub:Reference-Position"
\end_layout
\begin_layout Standard
-En faisant un clic droit sur la boîte d'un flottant, on ouvre la fenêtre
- de dialogue
+En faisant un clic droit sur la boîte d'un flottant et
+\lang english
+clicking on
\family sans
-Paramètre
-\begin_inset space ~
-\end_inset
-
-de
-\begin_inset space ~
-\end_inset
-
-Flottant
+Settings
\family default
- dans laquelle vous pouvez modifier le paramètres de placement que LaTeX
- utilise pour déterminer où placer le flottant.
+\lang french
+ on ouvre une fenêtre de dialogue dans laquelle vous pouvez modifier le
+ paramètres de placement que LaTeX utilise pour déterminer où placer le
+ flottant.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Section
-Flottants Renversés
+Flottants renversés
\begin_inset CommandInset label
LatexCommand label
name "sec:Flottants-renversés"
\end_layout
\begin_layout Section
-Mise en Forme de la Légende
+Mise en forme de la légende
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Standard
-en code TeX
-\lang english
-at the point where you want to
-\lang french
- revenir à la définition originale du flottant.
+en code TeX à l'endroit où vous voulez revenir à la définition originale
+ du flottant.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-
-\lang english
-The default caption width is the width of the image/table.
- For thin image/tables, like in
-\lang french
- tableau
+La largeur de légende par défaut est celle de l'image ou du tableau.
+ Pour des images ou des tableaux étroits, comme le tableau
\begin_inset space ~
\end_inset
\end_inset
-,
-\lang english
-this leads to captions that are too thin.
- You can increase the width by specifying a factor that will be multiplied
- with the image/table width to get the caption width.
- The caption width will automatically be recalculated in case it would protrude
- over the page or column margin due to the specified width.
- The
+, cela donne des légendes trop étroites.
+ Vous pouvez augmenter la largeur en précisant un facteur qui sera multiplié
+ à la largeur de l'image ou du tableau pour obtenir la largeur de la légende.
+ La largeur de la légende sera automatiquement recalculée dans le cas où
+ cette dernière déborderait dans la marge de la page ou de la colonne à
+ cause de la largeur indiquée.
+ Le
\emph on
-factor
+facteur
\emph default
- can either be given as optional argument for
+peut soit être donné comme argument pour
\series bold
\backslash
\begin_layout Standard
\series bold
-\lang english
\backslash
-FigBesBeg[factor]
+FigBesBeg[facteur]
\end_layout
\begin_layout Standard
-
-\lang english
-or in the definition of
+ou dans la définition de
\series bold
\backslash
-FigBesBeg
+FigBesBeg
\series default
- by replacing the
+en remplaçant le
\series bold
-1.0
+ 1.0
\series default
- with another value.
- If you do the latter, your factor will be the default if
+par une autre valeur.
+ Si vous utilisez cette dernière méthode, votre facteur sera utilisé de
+ façon implicite quand
\series bold
\backslash
FigBesBeg
\series default
- is used without an argument.
- For
-\lang french
- tableau
+ est utilisé sans argument.
+ Pour le tableau
\begin_inset space ~
\end_inset
\end_inset
-
-\lang english
-the factor 5 was used.
+ on a utilisé 5 comme facteur.
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
\series bold
-\lang english
Note:
\series default
- For floats with captions set beside, you cannot use the float placement
- option
+ Pour les flottants qui ont leur légende sur le côté, vous ne pouvez pas
+ utiliser l'option de placement,
\family sans
-Here
+Ici
+\begin_inset space ~
+\end_inset
+
+à
+\begin_inset space ~
+\end_inset
+
+tout
\begin_inset space ~
\end_inset
-definitely
+prix
\family default
- because it is not supported by
+ parce qu'elle n'est pas gérée par
\series bold
sidecap
\series default
\end_layout
\begin_layout Section
-Les Listes de Flottants
+Les listes de flottants
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Section
-Les Notes de LyX
+Les notes de LyX
\begin_inset Index idx
status collapsed
\end_inset
-
-\lang english
-\lang french
-
\begin_inset Note Comment
status open
\begin_layout Description
Grisée Ce type de note apparaît à l'impression sous forme de texte grisé.
La boîte de cette note ressemble à ceci :
-\lang english
-
\begin_inset Newline newline
\end_inset
-\lang french
-
\begin_inset Newline newline
\end_inset
\begin_inset Note Note
-status open
+status collapsed
\begin_layout Plain Layout
Ici, on a redéfini la note grisée pour qu'elle apparaisse avec la définition
LyX
\family default
.
+
+\lang english
+You can switch between the three note types by right-clicking on the note-box.
+
+\lang french
Si vous voulez transformer une portion de texte existant en note, sélectionnez-
la et cliquez sur le bouton d'insertion de note.
Pour retransformer une note en texte, appuyez sur la touche
\end_inset
-\lang english
-You can change the text color of the greyed out notes in the menu
+\end_layout
+
+\begin_layout Standard
+Vous pouvez changer la couleur des notes grisées dans le menu
\family sans
Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
-Colors
+Paramètres\SpecialChar \menuseparator
+Couleurs
\family default
.
\end_layout
\begin_layout Section
-Notes en Bas de Page
+Notes en bas de page
\begin_inset CommandInset label
LatexCommand label
name "sec:Notes-bas-de-page"
\end_inset
-Note de bas de page en denors de la minipage.
+Note de bas de page en dehors de la minipage.
\begin_inset ERT
status collapsed
\end_layout
\begin_layout Standard
-La note de bas de page a été créee avec la commande
+La note de bas de page a été créée avec la commande
\begin_inset space ~
\end_inset
:
\begin_inset ERT
-status open
+status collapsed
\begin_layout Plain Layout
:
\begin_inset ERT
-status open
+status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Subsection
-Numérotation de Notes de Bas de Page
+Numérotation de notes de bas de page
\begin_inset CommandInset label
LatexCommand label
name "sub:Numerotation-notes-bas-de-page"
\begin_layout Plain Layout
Cette note est numérotée en suivant le schéma
-\begin_inset Quotes eld
+\begin_inset Quotes fld
\end_inset
chapitre.note
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
.
\end_layout
\begin_layout Section
-Notes en Marge
+Notes en marge
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Chapter
-Les Boîtes
+Les boîtes
\end_layout
\begin_layout Section
, elle utilise toujours toute la largeur de la colonne et la boîte constitue
son propre paragraphe.
-\lang english
-
\begin_inset Box Shaded
position "t"
hor_pos "c"
special "none"
height "1in"
height_special "totalheight"
-status collapsed
+status open
\begin_layout Plain Layout
Boîte avec fond ombré
\end_layout
\begin_layout Standard
-
-\lang english
\begin_inset VSpace bigskip
\end_inset
\end_layout
\begin_layout Standard
-
-\lang english
\begin_inset VSpace bigskip
\end_inset
\end_layout
\begin_layout Standard
-
-\end_layout
-
-\begin_layout Standard
-
-\lang english
\begin_inset Box Frameless
position "t"
hor_pos "c"
\begin_layout Plain Layout
-\lang german
+\lang ngerman
Dies ist ein deutscher Text.
Dies ist ein deutscher Text.
Dies ist ein deutscher Text.
\begin_layout Plain Layout
-\lang german
+\lang ngerman
Dies ist eine deutsche Fußnote.
\end_layout
\end_inset
This is an English Text.
-
\end_layout
\end_inset
\end_layout
\begin_layout Section
-Les Parboxes
+Les parboxes
\begin_inset CommandInset label
LatexCommand label
name "sec:Parboxes"
\end_layout
\begin_layout Standard
-\begin_inset Note Note
-status collapsed
-
-\begin_layout Plain Layout
-
-\lang english
-En attendant une traduction de parbox (NdT)
-\end_layout
-
-\end_inset
-
Les parboxes ressemblent beaucoup aux minipages à la différence qu'elles
ne peuvent avoir de note de bas de page.
\end_layout
special "none"
height "1in"
height_special "totalheight"
-status collapsed
+status open
\begin_layout Plain Layout
Ceci est un texte à l'intérieur d'une parbox.
\end_layout
\begin_layout Section
-Des Boîtes pour les Mots et les Caractères
+Des boîtes pour les mots et les caractères
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Subsection
-Empêcher la Césure
+Empêcher la césure
\begin_inset CommandInset label
LatexCommand label
name "sec:Empêcher-césure"
\end_layout
\begin_layout Subsection
-Alignement Vertical
+Alignement vertical
\begin_inset CommandInset label
LatexCommand label
name "sub:Alignement-Vertical"
\end_layout
\begin_layout Section
-Boîtes Colorées
+Boîtes colorées
\begin_inset CommandInset label
LatexCommand label
name "sec:Boîtes-colorées"
\end_layout
\begin_layout Chapter
-
-\lang english
-Objects Surrounded by Text
+Objets entourés par du texte
\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-\lang english
-Surrounded by text
+Entourés par du texte
\end_layout
\end_inset
\end_inset
-\lang english
-
\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-\lang english
-Surrounded by text !
-\lang french
-Flottants d'enrobage
+Entourés par du texte ! Flottants d'enrobage
\end_layout
\end_inset
\end_layout
\begin_layout Itemize
-
-\lang english
-Their numbering and referencing works as described in chap.
-\lang french
-
-\begin_inset space \thinspace{}
+Leur numérotation et leur référencement fonctionnent comme décrit dans le
+ chapitre
+\begin_inset space ~
\end_inset
\end_layout
\begin_layout Section
-
-\lang english
-Surrounded Fixed Objects
+Objets fixes entourés par du texte
\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-\lang english
-Surrounded by text ! Fixed objects
+Entouré par du texte ! Objets fixes
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-
-\lang english
-The wrap floats described in sec.
-\lang french
-
+Les flottants d'enrobage décrits dans la section
\begin_inset space \thinspace{}
\end_inset
\end_inset
-
-\lang english
- have these positions in the paragraph:
+ prennent les positions suivantes dans le paragraphe :
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-
-\lang english
-To get an object exactly at the position where it is inserted, for example
- to get one of these positions:
-\lang french
-
+Pour avoir un objet exactement à la position à laquelle il a été inséré,
+ par exemple pour avoir une de ces positions :
\begin_inset VSpace defskip
\end_inset
\end_layout
+\begin_layout Standard
+vous pouvez utiliser la paquetage LaTeX
+\end_layout
+
\begin_layout Standard
\noindent
-\lang english
-you can use the LaTeX-package
-\lang french
-
\series bold
picinpar
\series default
\end_inset
.
-
-\lang english
-Here is an example
-\lang french
-:
+ Voici un exemple :
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-
-\lang english
\begin_inset ERT
status collapsed
\end_inset
-Footnote of the paragraph with the fixed object.
+Note de pied de page du paragraphe avec objet fixe.
\begin_inset ERT
status collapsed
\end_layout
\begin_layout Standard
-
-\lang english
-Surrounded fixed objects are used to let text float around them, at which
- the object's position in the paragraph can be determined by the number
- of lines above it.
- In contrary to floats is it not possible to have a numbered caption.
+Les objets fixes enrobés sont utilisés pour laisser le texte s'écouler autour
+ d'eux et leur position est déterminée par le nombre de lignes de texte
+ situées audessus d'eux.
+ Contrairement aux flottants d'enrobage, on ne peut pas avoir de légende
+ numérotée.
\end_layout
\begin_layout Standard
-
-\lang english
-A fixed object is inserted by adding the command
+Un objet fixe enrobé est inséré en ajoutant la commande
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-
-\lang english
-as TeX Code at the beginning of the paragraph.
- The first parameter in the bracket, here '2', defines the number of lines
- above the object, the second, here 'c', the position of the object.
- The positions 'l', 'c' and 'r' (for left, center, right) are possible.
- Behind the command you insert the object.
- In this example an image with a width of 40
+en code TeX au debut du paragraphe.
+ Le premier paramètre du crochet, ici '2', définit le nombre de lignes au
+ dessus de l'objet, le second, ici 'c', la position de l'objet.
+ Les positions 'l', 'c' et 'r' ( respectivement pour gauche, centré et droite
+ ) sont possibles.
+ Après la commande, vous insérez votre objet.
+ Dans cet exemple, c'est une image avec une largeur de 40
\begin_inset space \thinspace{}
\end_inset
-% of the text column width was inserted.
- The object can also be a table, a box or an equation.
- Behind the object the command
+% de la colonne de texte qui a été insérée.
+ L'objet peut aussi être un tableau, une boîte ou une équation.
+ Après l'objet, on insère la commande
\end_layout
\begin_layout Standard
\series bold
-},description text]
+},texte de description ]
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Standard
-
-\lang english
-is inserted.
- Note that the
-\begin_inset Quotes eld
+Notez que le
+\begin_inset Quotes fld
\end_inset
{}
\series default
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
- is in the second line.
- The description text is optional.
- The text surrounding the object must be in the same paragraph as the object,
- so it must begin directly after the
+ est sur la deuxième ligne.
+ Le texte de description est facultatif.
+ Le texte entourant l'objet doit être dans le même paragraphe que celui-ci,
+ il doit donc commence juste après le
\series bold
{}
\series default
.
- At the end of the paragraph insert the command:
+ A la fin du paragraphe on insère la commande :
\end_layout
\begin_layout Standard
\series bold
-\lang english
\backslash
end{window}
\end_layout
\begin_layout Standard
-
-\lang english
-Within a paragraph with a fixed object, you cannot insert footnotes in the
- normal way.
- You have to use instead the command
+A l'intérieur d'un paragraphe contenant un objet fixe, vous ne pouvez pas
+ ajouter des notes de pied de page de la façon habituelle.
+ Vous devez utiliser la commande
\series bold
\backslash
footnotemark
\series default
- inside the paragraph and outside the command
+ à l'intérieur du paragraphe et la commande
\series bold
\backslash
footnotetext
\series default
- as described in sec.
-\lang french
-
+ à l'extérieur, comme décrit dans la section
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Section
-
-\lang english
-Initials
+Lettrines
\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-\lang english
-Initials
+Lettrines
\end_layout
\end_inset
status collapsed
\begin_layout Plain Layout
-
-\lang english
-Surrounded by text ! Initials
+Entouré par du texte ! Lettrines
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-
-\lang english
-To use initials, you must have the LaTeX package
-\lang french
-
+Pour utiliser des lettrines, le paquetage LaTeX
\series bold
lettrine
\series default
\end_inset
-
-\lang english
-installed and use the module
-\family sans
-Initials
-\family default
- in your document (menu
+ doit être installé et vous devez utiliser le module Initiales (
+\begin_inset space ~
+\end_inset
+
+menu
\family sans
Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
+Paramètres\SpecialChar \menuseparator
Modules
\family default
+
+\begin_inset space ~
+\end_inset
+
).
- To insert an initial, use the style
+ Pour insérer une lettrine, utilisez le style
\family sans
Initial
\family default
.
- This style has a mandatory and an optional argument.
- The mandatory argument is inserted via the menu
+ Ce dernier a un paramètre obligatoire et un autre facultatif.
+ Le paramètre obligatoire est inséré avec le menu
\family sans
-Insert\SpecialChar \menuseparator
-Short
+Insérer\SpecialChar \menuseparator
+Titre
\begin_inset space ~
\end_inset
-Title
+court
\family default
- and contains the letter that is the initial.
- To use the also the optional argument, insert another argument in front
- of the mandatory argument.
- This one contains parameters to modify the initial.
- For more information about the possible parameters see the documentation
- of
-\lang french
-
+ et contient la lettre qui sert d'initiale.
+ Pour utiliser aussi le paramètre facultatif, ajoutez un autre paramètre
+ avant le paramètre obligatoire.
+ Ce paramètre sert à modifier la lettrine.
+ Pour plus d'informations sur les paramètres possibles, voyez la documentation
+ du paquetage
\series bold
lettrine
\series default
\end_inset
.
-
-\lang english
-The style itself contains the text that is surrounding the initial.
- The usual style is hereby that the word whose first letter is the initial,
- is printed with
+ Le style lui-même contient le texte qui doit entourer la lettrine.
+ Le style habituel est par conséquent que le mot dont la première lettre
+ est l'initiale soit en
\shape smallcaps
-small caps
+petites capitales
\shape default
.
- To tell LaTeX where this word is finished, add a closing brace '
-\series bold
-}
-\series default
-' as TeX Code behind it.
- At the end of the style there must be an opening brace '
-\series bold
-{
-\series default
-' as TeX Code.
+ Pour indiquer à LaTeX où ce mot se termine, ajoutez une accolade fermante
+ '}' en code TeX juste après.
+ A la fin du style on doit placer une accolade ouvrante '{' en code TeX.
\end_layout
\begin_layout Standard
+\begin_inset Newpage pagebreak
+\end_inset
-\lang english
-Here are some examples:
+
+\end_layout
+
+\begin_layout Standard
+Voici quelques exemples
+\begin_inset space ~
+\end_inset
+
+:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Enumerate
-
-\lang english
-No optional argument, the initial is the letter 'I' in the math font
+Pas de paramètre optionnel, la lettre initiale est un 'I' dans la police
+ mathématique
\begin_inset Formula $\mathfrak{Fraktur}$
\end_inset
-
-\lang french
:
\end_layout
\end_deeper
\begin_layout Enumerate
+L'initiale est entourée par une seule ligne et est formée de deux lettres
+ dans la police standard ; aucun texte n'est écrit en petites capitales
+\begin_inset space ~
+\end_inset
-\lang english
-Only one line is surrounding the initial, which is formed by two letters
- in standard font and no text is printed in small caps:
+:
\end_layout
\begin_deeper
\end_deeper
\begin_layout Enumerate
-
-\lang english
-Magenta, hanging initial over 3
+Initiale descendante sur 3
\begin_inset space ~
\end_inset
-lines in the math font
+lignes en magenta en police mathématique
\begin_inset Formula $\mathcal{CALLIGRAPHIC}$
\end_inset
-, the text
-\begin_inset Quotes eld
+, le texte
+\begin_inset Quotes fld
\end_inset
+
+\lang english
t was in the spring
-\begin_inset Quotes erd
+\lang french
+
+\begin_inset Quotes frd
\end_inset
- is in
+ est en
\shape smallcaps
-small caps
+petites capitales
\shape default
-; to color the initial, you must insert this command before the initial:
+ ; pour colorer la lettrine, il faut insérer la commande suivante juste
+ avant l'initiale
+\begin_inset space ~
+\end_inset
+
+:
\begin_inset Newline newline
\end_inset
\series bold
-\lang french
\backslash
renewcommand{
\backslash
LettrineFontHook}{
\backslash
-color{color}}
+color{couleur}}
\series default
-\lang english
\begin_inset Newline newline
\end_inset
-where the second
+où la
\emph on
-color
+couleur
\emph default
- can be
-\begin_inset Quotes eld
+ peut être
+\begin_inset Quotes fld
\end_inset
red
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
,
-\begin_inset Quotes eld
+\begin_inset Quotes fld
\end_inset
blue
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
,
-\begin_inset Quotes eld
+\begin_inset Quotes fld
\end_inset
green
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
,
-\begin_inset Quotes eld
+\begin_inset Quotes fld
\end_inset
yellow
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
,
-\begin_inset Quotes eld
+\begin_inset Quotes fld
\end_inset
cyan
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
,
-\begin_inset Quotes eld
+\begin_inset Quotes fld
\end_inset
magenta
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
,
-\begin_inset Quotes eld
+\begin_inset Quotes fld
\end_inset
black
-\begin_inset Quotes erd
+\begin_inset Quotes frd
\end_inset
- or
-\begin_inset Quotes eld
+ ou
+\begin_inset Quotes fld
\end_inset
white
-\begin_inset Quotes erd
+\begin_inset Quotes frd
+\end_inset
+
+.
+ On doit aussi ajouter la commande suivante au préambule du document
+\begin_inset space ~
\end_inset
-, and add this command to the document preamble
-\lang french
:
\begin_inset Newline newline
\end_inset
\end_inset
-\lang english
-
\begin_inset Note Note
status collapsed
\begin_layout Plain Layout
-
-\lang english
-makes the initial magenta
+colore la lettrine en magenta
\end_layout
\end_inset
\lang english
t was in the spring
-\lang french
-
\begin_inset ERT
status collapsed
\end_inset
-
-\lang english
-of the year 1894 that all London was interested, and the fashionable world
+ of the year 1894 that all London was interested, and the fashionable world
dismayed, by the murder of the Honourable Ronald Adair under most unusual
and inexplicable circumstances.
The public has already learned those particulars of the crime which came
\end_layout
\begin_layout Chapter
-Trucs Externes
+Trucs externes
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Section
-Objets Externes
+Objets externes
\begin_inset Index idx
status collapsed
\begin_inset Note Note
-status open
+status collapsed
\begin_layout Plain Layout
Retirer l'espace protégé quand le bug 4398 sera résolu !
\end_layout
\begin_layout Description
-
-\lang english
-GnumericSpreadsheet With this template you can insert spreadsheets
-\begin_inset space \thinspace{}
-\end_inset
-
-/
-\begin_inset space \thinspace{}
-\end_inset
-
-tables in the format of
+TableurGnumeric Avec ce modèle vous pouvez insérer des feuilles de calcul
+ ou des tableaux dans le format de
\series bold
\begin_inset CommandInset href
\end_inset
- and
+ et
\begin_inset CommandInset href
LatexCommand href
name "Office Open XML"
\end_inset
.
- For this feature LyX must have found the program
+ Pour cette fonction, LyX doit pouvoir trouver le programme
\family typewriter
ssconvert
\family default
- during its configuration.
- This program is part of Gnumeric, so that you must have Gnumeric installed,
- also if you don't have tables in the Gnumeric format.
- For examples and possible limitations have a look at LyX's example file
-
+ au cours de sa configuration.
+ Ce programme fait partie de gnumeric, vous devez donc aussi installer gnumeric,
+ même si vous n'avez pas de tableaux au format gnumeric.
+ Pour des exemples et les limitations possibles, jetez un œil au fichier
+ LyX d'exemple,
\emph on
spreadsheet.lyx
\emph default
\series default
.
-
-\lang english
-For LyX's extended support for LilyPond have a look at LyX's example file
-
+ Pour plus d'information sur la gestion étendue de LilyPond, jetez un oeil
+ au fichier LyX d'exemple
\emph on
lilypond.lyx
\emph default
Options LaTeX et LyX
\family default
.
-
-\lang english
-The argument of this option is a comma separated list, containing page numbers
- (insert as option
+ L'argument de cette option est une liste d'éléments séparés par des virgules,
+ contenant des numéros de pages (
+\begin_inset space ~
+\end_inset
+
+insérez comme option
\series bold
pages={3,5,6,8}
\series default
-), ranges of page numbers (
+
+\begin_inset space ~
+\end_inset
+
+), des plages de numéros de pages (
\series bold
+
+\begin_inset space ~
+\end_inset
+
pages={4-9}
\series default
-) or any combination.
- To insert empty pages use {}.
- E.
-\begin_inset space \thinspace{}
+
+\begin_inset space ~
\end_inset
-g.
+) ou n'importe quelle combinaison des deux.
+ Pour insérer des pages vides, utilisez
+\series bold
+{}
+\series default
+.
+ Par exemple
\begin_inset space ~
\end_inset
\series bold
pages={3,{},8-11,15}
\series default
- will insert page 3, an empty page, and pages 8, 9, 10, 11 and 15.
- Page ranges are specified in the syntax
+ va insérer la page 3, puis une page vide, puis les pages 8, 9, 10, 11 et
+ 15.
+ Les plages de pages sont décrites avec la syntaxe
\emph on
-start
+début-fin
\emph default
--
+ qui sélectionne toutes les pages de
\emph on
-stop
+début
\emph default
-.
- This selects all pages from
+ jusqu'à
\emph on
-start
-\emph default
- to
-\emph on
-stop
+fin
\emph default
.
- Omitting
+ Si on omet
\emph on
-start
+début
\emph default
- defaults to the first page; omitting
+, on commence implicitement à la première page ; de même, omettre
\emph on
-stop
+fin
\emph default
- defaults to the last page of the document.
- The last page can also be selected with the keyword
+ termine implicitement à la dernière page du document.
+ La dernière page du document peut aussi être désignée par le mot-clé
\series bold
last
\series default
-.
- (This is only permitted in a page range.) So
+ (
+\begin_inset space ~
+\end_inset
+
+ce dernier n'est accepté que pour une plage de pages
+\begin_inset space ~
+\end_inset
+
+).
+ Donc
\series bold
pages=-
\series default
- will insert all pages of the document and
+ va insérer toutes les pages du document et
\series bold
pages=last-1
\series default
- will insert all pages in reverse order.
-
-\lang french
+ va insérer toutes les pages dans l'ordre inverse.
Si on ne donne pas d'option pages, seule la première page du PDF sera insérée.
\begin_inset Newline newline
\end_inset
-
-\lang english
-The option
+L'option
\series bold
noautoscale
\series default
- inserts the pages with their original size, if this option is not given,
- the pages will be resized to fith the width of the page of your document.
- In the tab
+ insère les pages avec leur taille d'origine, si cette option n'est pas
+ donnée, les pages seront redimensionnées
+\begin_inset space \space{}
+\end_inset
+
+pour tenir dans la largeur de page de votre document.
+ Dans l'onglet
\family sans
-Size and Rotation
+Taille
+\begin_inset space ~
+\end_inset
+
+et
+\begin_inset space ~
+\end_inset
+
+rotation
\family default
- you can specify the width and height of the input pages and their rotation.
- If another width than 100
+ vous pouvez préciser la largeur et la hauteur des pages incorporées ainsi
+ qu'une éventuelle rotation.
+ Si vous utilisez une autre largeur que 100
\begin_inset space \thinspace{}
\end_inset
-Scale% is used, the option
+Échelle%, l'option
\series bold
noautoscale
\series default
- will be overwritten.
- For more info and possible options, have a look into the documentation
- of the LaTeX-package
+ sera neutralisée.
+ Pour plus d'information sur les options possibles, jetez un œil sur la
+ documentation du paquetage LaTeX
\series bold
pdfpages
\series default
-\lang french
\begin_inset CommandInset citation
LatexCommand cite
\begin_inset Newline newline
\end_inset
-
-\lang english
-To use this template in a
+Pour utiliser ce modèle dans une présentation
\family sans
Beamer
\family default
- presentation you need to first insert an
+ vous devez d'abord insérer un environnement
\family sans
-EndFrame
+FinCadre
\family default
- environment and in a subsequent paragraph a TeX Code box containing the
- command
+ et dans la suite, dans un paragraphe, une boîte de code TeX contenant la
+ commande
\series bold
\backslash
setbeamertemplate{background canvas}{}
\series default
.
- Then you can insert as many paragraphs containing the PDFPages template
- as you wish.
- Behind the included PDF pages you can resume the Beamer presentation by
- beginning a new frame or by starting a new section.
- To avoid stray blank pages prior to the PDF pages, make sure to use the
-
-\family sans
-Default
-\family default
- alignment for the paragraph containing the template.
+ Ensuite vous pouvez insérer autant de paragraphes contenant le modèle PDFPages
+ que vous voulez.
+ Après les pages PDF incorporées, vous pouvez reprendre la présentation
+ Beamer en commençant une nouvelle diapositive ou en commençant une nouvelle
+ section.
+ Pour éviter des pages blanches indésirables avant les pages PDF, n'oubliez
+ pas d'utiliser un alignement Implicite pour le paragraphe qui contient
+ le modèle.
\begin_inset Newline newline
\end_inset
-Here is an included PDF which is rotated by -5°:
-\lang french
-
+Voici un PDF incorporé basculé de -5°
+\begin_inset space ~
+\end_inset
+
+°:
\begin_inset External
template PDFPages
filename ../clipart/Abstract.pdf
\end_inset
.
- La différence
-\lang english
-to the normal image input
-\lang french
- est que seules les images matricielles sont autorisées, ce qui veut dire
- que les images PDF et EPS ne sont pas acceptées.
-
-\lang english
-Here is an inserted raster image:
-\lang french
-
+ La différence avec l'insertion normale d'image est que seules les images
+ matricielles sont autorisées, ce qui veut dire que les images PDF et EPS
+ ne sont pas acceptées.
+ Voici un exemple d'insertion d'image matricielle
+\begin_inset space ~
+\end_inset
+
+
\begin_inset External
template RasterImage
filename ../clipart/ToolbarEnvBox.png
(include) Vous pouvez inclure des documents LyX et LaTeX.
Quand vous cliquez sur le bouton
\family sans
-Charger
+Modifier
\family default
dans la fenêtre de dialogue
\family sans
.
En activant ou désactivant une branche, vous pouvez décider les fichiers
inclus qui doivent apparaître dans la sortie imprimée.
- Cette méthode à l'avantage qu'elle peut aussi s'apliquer aux sous documents
+ Cette méthode à l'avantage qu'elle peut aussi s’appliquer aux sous documents
\begin_inset Quotes fld
\end_inset
\end_layout
\begin_layout Chapter
-Listings de Code Source
+Listings de code source
\begin_inset CommandInset label
LatexCommand label
name "cha:Program-Code-Listings"
\end_layout
\begin_layout Chapter
-
-\lang english
-List of dvips color names
+Liste de noms de couleur pour dvips
\begin_inset CommandInset label
LatexCommand label
-name "chap:List-of-dvips-colornames"
+name "chap:Liste-de-noms-de-couleur-dvips"
\end_inset
\end_inset
-
-\lang english
-Color
-\lang french
-
+Couleur
\begin_inset ERT
status collapsed
\end_inset
-
-\lang english
-Color name
+ Nom
\end_layout
\end_inset
\end_inset
-
-\lang english
-Color
-\lang french
-
+Couleur
\begin_inset ERT
status collapsed
\end_inset
-
-\lang english
-Color name
+ Nom
\end_layout
\end_inset
\end_inset
-
-\lang english
-Color
-\lang french
-
+Couleur
\begin_inset ERT
status collapsed
\end_inset
-
-\lang english
-Color name
+ Nom
\end_layout
\end_inset
\end_inset
-
-\lang english
-Color
-\lang french
-
+Couleur
\begin_inset ERT
status collapsed
\end_inset
-
-\lang english
-Color name
+ Nom
\end_layout
\end_inset
\end_layout
\begin_layout Chapter
-Explication de l' Ã\89quation
+Explication de l' équation
\begin_inset space ~
\end_inset
Addison-Wesley, second edition, 1994
\end_layout
+\begin_layout Bibliography
+\labelwidthstring Bibliographie
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "arydshln"
+
+\end_inset
+
+Documentation du paquetage LaTeX
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "arydshln"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/arydshln/arydshln.pdf"
+
+\end_inset
+
+
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Paquetages LaTeX ! arydshln
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
\begin_layout Bibliography
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
\end_inset
+\end_layout
+
+\begin_layout Bibliography
+\labelwidthstring Bibliographie
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "diagbox"
+
+\end_inset
+
+Documentation du paquetage LaTeX
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "diagbox"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/diagbox/diagbox.pdf"
+
+\end_inset
+
+
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Paquetages LaTeX ! diagbox
+\end_layout
+
+\end_inset
+
+
\end_layout
\begin_layout Bibliography
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "listings"
+key "lettrine"
\end_inset
\begin_inset CommandInset href
LatexCommand href
-name "listings"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/listings/listings.pdf"
+name "lettrine"
+target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/lettrine.pdf"
\end_inset
\series default
+ et un
+\begin_inset CommandInset href
+LatexCommand href
+name "exemple"
+target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/demo.pdf"
+
+\end_inset
+
\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Paquetages LaTeX ! listings
+Paquetages LaTeX ! lettrine
\end_layout
\end_inset
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "marginnote"
+key "listings"
\end_inset
\begin_inset CommandInset href
LatexCommand href
-name "marginnote"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/marginnote/marginnote.pdf"
+name "listings"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/listings/listings.pdf"
\end_inset
status collapsed
\begin_layout Plain Layout
-Paquetages LaTeX ! marginnote
+Paquetages LaTeX ! listings
\end_layout
\end_inset
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "lettrine"
+key "marginnote"
\end_inset
\begin_inset CommandInset href
LatexCommand href
-name "lettrine"
-target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/lettrine.pdf"
+name "marginnote"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/marginnote/marginnote.pdf"
\end_inset
\series default
- et un
-\begin_inset CommandInset href
-LatexCommand href
-name "exemple"
-target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/demo.pdf"
-
-\end_inset
-
\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Paquetages LaTeX ! lettrine
+Paquetages LaTeX ! marginnote
\end_layout
\end_inset
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "pstricks"
+key "pdfpages"
\end_inset
-Page Web du paquetage LaTeX
+Documentation du paquetage LaTeX
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "PSTricks"
-target "http://tug.org/PSTricks/"
+name "pdfpages"
+target "http://www.ctan.org/tex-archive/macros/latex/contrib/pdfpages/pdfpages.pdf"
\end_inset
status collapsed
\begin_layout Plain Layout
-Paquetages LaTeX ! PSTricks
+Paquetages LaTeX ! pdfpages
\end_layout
\end_inset
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "sidecap"
+key "prettyref"
\end_inset
-Documentation du paquetage LaTeX
+Documentation du paquetage LaTeX
\series bold
-
+
\begin_inset CommandInset href
LatexCommand href
-name "sidecap"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/sidecap/sidecap.pdf"
+name "prettyref"
+target "http://www.ctan.org/tex-archive/macros/latex/contrib/prettyref/prettyref.pdf"
\end_inset
status collapsed
\begin_layout Plain Layout
-Paquetages LaTeX ! sidecap
+Paquetages LaTeX ! prettyref
\end_layout
\end_inset
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "pdfpages"
+key "pstricks"
\end_inset
-Documentation du paquetage LaTeX
+Page Web du paquetage LaTeX
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "pdfpages"
-target "http://www.ctan.org/tex-archive/macros/latex/contrib/pdfpages/pdfpages.pdf"
+name "PSTricks"
+target "http://tug.org/PSTricks/"
\end_inset
status collapsed
\begin_layout Plain Layout
-Paquetages LaTeX ! pdfpages
+Paquetages LaTeX ! PSTricks
\end_layout
\end_inset
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "prettyref"
+key "refstyle"
\end_inset
\begin_inset CommandInset href
LatexCommand href
-name "prettyref"
-target "http://www.ctan.org/tex-archive/macros/latex/contrib/prettyref/prettyref.pdf"
+name "refstyle"
+target "http://mirrors.ctan.org/macros/latex/contrib/refstyle/refstyle.pdf"
\end_inset
status collapsed
\begin_layout Plain Layout
-Paquetages LaTeX ! prettyref
+Paquetages LaTeX ! refstyle
\end_layout
\end_inset
\labelwidthstring Bibliographie
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "refstyle"
+key "sidecap"
\end_inset
-Documentation du paquetage LaTeX
+Documentation du paquetage LaTeX
\series bold
-
+
\begin_inset CommandInset href
LatexCommand href
-name "refstyle"
-target "http://mirrors.ctan.org/macros/latex/contrib/refstyle/refstyle.pdf"
+name "sidecap"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/sidecap/sidecap.pdf"
\end_inset
status collapsed
\begin_layout Plain Layout
-Paquetages LaTeX ! refstyle
+Paquetages LaTeX ! sidecap
\end_layout
\end_inset