\html_math_output 0
\html_css_as_file 0
\html_be_strict true
-\author 5863208 "ab"
\end_header
\begin_body
Also check the appropriate section of this manual for more details.
\end_layout
-\end_deeper
-\begin_layout Enumerate
-Tables
-\end_layout
-
-\begin_deeper
-\begin_layout Standard
-
-\emph on
-Single click
-\emph default
- the right mouse button to open a dialog that will allow you to manipulate
- the table.
-\end_layout
-
\end_deeper
\begin_layout Section
Navigating
\family default
There is no such thing as a tab stop in LyX.
- If you don't understand this, go read sections
+ If you do not understand this, go read sections
\begin_inset space ~
\end_inset
\end_deeper
\begin_layout Standard
-You'll learn more and more key bindings and short-cut keys as you use LyX,
- because most actions will prompt a small message in the status bar at the
- bottom of LyX's main window which describe the name of the action, you've
- just triggered, and any existing key bindings for that action.
+You will learn more and more key bindings and short-cut keys as you use
+ LyX, because most actions will prompt a small message in the status bar
+ at the bottom of LyX's main window which describe the name of the action,
+ you've just triggered, and any existing key bindings for that action.
The LyX menus also list the defined key bindings.
The notation for the key bindings is very similar to the notation used
in this documentation, so you should not have any problems understanding
\family default
under
\family sans
-Editing\SpecialChar \menuseparator
+Edit\SpecialChar \menuseparator
Shortcuts
\family default
as explained in sec.
\begin_layout Subsubsection
Local Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "sub:Local-Layout"
+
+\end_inset
+
+
\begin_inset Index idx
status collapsed
\end_inset
.
- See chapter 5 of the Customization manual for information on how to use
- it.
+ See section
+\emph on
+Local Layout
+\emph default
+ of the
+\emph on
+Customization
+\emph default
+ manual for information on how to use it.
\end_layout
\begin_layout Subsubsection
\family sans
Fancy
\family default
- This allows you to create fully customizable headers and footers if you
- have the
+ This allows you to define fully customizable headers and footers if you
+ have the LaTeX-package
\series bold
fancyhdr
\series default
\end_inset
- package installed.
- At the moment, support in LyX is limited to this setting.
- To use the full power of this package, you have to add code to your document
- preamble.
- Check the documentation for the
-\series bold
-fancyhdr
-\series default
- package for more details,
-\begin_inset CommandInset citation
-LatexCommand cite
-key "fancyhdr"
+ installed.
+ How they are defined is explained in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Customized-Page-Headers"
\end_inset
\end_layout
\begin_layout Standard
-The
-\family sans
-Separation
-\family default
- of paragraphs is described in section
+The separation of paragraphs is described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sec:Par-indent-intro"
+reference "sub:Paragraph-Separation"
\end_inset
\begin_inset CommandInset label
LatexCommand label
-name "sub:Paper-Size,-Orientation,"
+name "sub:Paper-Size,-Orientation"
\end_inset
Layout
\family default
- of the dialog of the
+ of the
\family sans
Document\SpecialChar \menuseparator
Settings
\family default
- menu:
+ dialog:
\family sans
\begin_inset Index idx
\family sans
Orientation
\family default
- Two toggle buttons choose whether to print the output as
+ To choose whether to output as
\family sans
Landscape
\family default
all
\emph default
of these pre-coded spacings.
- We'll explain more later.
+ We will explain more later.
\end_layout
\begin_layout Subsection
Paragraph Separation
+\begin_inset CommandInset label
+LatexCommand label
+name "sub:Paragraph-Separation"
+
+\end_inset
+
+
\begin_inset Index idx
status collapsed
\end_layout
\begin_layout Standard
-There are 5 types of unnumbered section headings.
- They are:
-\end_layout
-
-\begin_layout Enumerate
-
-\family sans
-Part*
-\end_layout
-
-\begin_layout Enumerate
-
-\family sans
-Chapter*
-\end_layout
-
-\begin_layout Enumerate
-
-\family sans
-Section*
-\end_layout
-
-\begin_layout Enumerate
-
-\family sans
-Subsection*
-\end_layout
-
-\begin_layout Enumerate
-
-\family sans
-Subsubsection*
-\end_layout
-
-\begin_layout Standard
-The
+The unnumbered section headings have a
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- after each name means that these headings are not numbered.
- They work the same as their numbered counterparts but won't appear in the
- table of contents, see section
+ at the end of their name.
+ They work the same as their numbered counterparts but will not appear in
+ the table of contents, see section
\begin_inset space ~
\end_inset
\end_layout
\begin_layout Itemize
-You can't use
+You cannot use
\begin_inset Info
type "shortcut"
arg "newline-insert newline"
\end_layout
\begin_layout Standard
-Here's an example:
+Here is an example:
\end_layout
\begin_layout LyX-Code
\end_inset
+ For longer parts of programming code, use the listings inset that is described
+ in the chapter
+\emph on
+Program Code Listings
+\emph default
+ of the
+\emph on
+Embedded
+\begin_inset space ~
+\end_inset
+Objects
+\emph default
+ manual.
\end_layout
\begin_layout Section
\family typewriter
-Computer Modern
+Computer
+\begin_inset space ~
+\end_inset
+
+Modern
\family default
\begin_inset Quotes erd
\begin_layout Itemize
select the
-\family typewriter
-Latin Modern
-\family default
- (
-\family typewriter
-lm
+\family sans
+Latin
+\begin_inset space ~
+\end_inset
+
+Modern
\family default
-) fonts, which is the recommended choice if you want to keep the look of
+ fonts, which is the recommended choice if you want to keep the look of
\family typewriter
cm
\family default
.
-\family typewriter
-Latin Modern
+\family sans
+Latin
+\begin_inset space ~
+\end_inset
+
+Modern
\family default
was developed for the LaTeX community in order to replace
\family typewriter
as the default font.
It covers a huge range of glyphs and several font shapes.
Except for some details, where the appearance was improved,
-\family typewriter
-lm
+\family sans
+Latin
+\begin_inset space ~
+\end_inset
+
+Modern
\family default
looks identical to
\family typewriter
cm
\family default
-;
+.;
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-One difference is improved kerning for the
-\family typewriter
-lm
-\family default
- fonts.
+One difference is improved kerning.
\end_layout
\end_inset
\end_layout
\begin_layout Itemize
-select the
-\family typewriter
+or select the
+\family sans
AE
+\begin_inset space ~
+\end_inset
+
+(Almost
+\begin_inset space ~
+\end_inset
+
+European)
\family default
- (
-\family typewriter
-Almost European
-\family default
-) fonts in (the rare) case that
-\family typewriter
-Latin Modern
+ fonts in (the rare) case that
+\family sans
+Latin
+\begin_inset space ~
+\end_inset
+
+Modern
\family default
is not available to you or does not work, and you still want to emulate
the look of
\end_inset
-\family sans
-Times Roman
+\family typewriter
+Times
+\begin_inset space ~
+\end_inset
+
+Roman
\family default
or
\family typewriter
-
-\family sans
-Palatino
+ Palatino
\family default
.
Most roman vector fonts will automatically select matching sans
g.,
\family sans
-Times Roman
+Times
+\begin_inset space ~
+\end_inset
+
+Roman
\family default
selects
\family sans
-Helvetiva
+Helvetica
\family default
- for sans serif text), and sometimes, e.
+ for sans serif text), or different shapes of the same font, i.
\begin_inset space \thinspace{}
\end_inset
-g.
- with
-\family typewriter
-Latin Modern
-\family default
- or
-\family typewriter
-Computer Modern
-\family default
-, different shapes of the same font, i.
-\begin_inset space \thinspace{}
+e.
+\begin_inset space \space{}
\end_inset
-e.
- a real font
+a real font
\emph on
family
\emph default
-.
+ (e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+in case of
+\family sans
+Latin
+\begin_inset space ~
+\end_inset
+
+Modern
+\family default
+ oder
+\family sans
+Computer
+\begin_inset space ~
+\end_inset
+
+Modern
+\family default
+).
\end_layout
\end_inset
serif
\family default
-, and
+ and
\family typewriter
typewriter
\family default
\end_inset
The font
-\family typewriter
-Times Roman
+\family sans
+Times
+\begin_inset space ~
+\end_inset
+
+Roman
\family default
was originally designed for newspapers.
That means its glyphs are smaller than the ones from other fonts to fit
into the small newspaper columns.
Therefore
-\family typewriter
-Times Roman
+\family sans
+Times
+\begin_inset space ~
+\end_inset
+
+Roman
\family default
is not the optimal choice for larger documents like books.
-\begin_inset VSpace bigskip
-\end_inset
+\end_layout
+\begin_layout Standard
For the font size there are generally four possible values:
\family sans
Default, 10
\family sans
11
\family default
-, and
+ and
\family sans
12
\family default
\end_inset
Style\SpecialChar \menuseparator
-Customized\SpecialChar \ldots{}
-
+Customized
\family default
dialog.
There are several boxes on this dialog, each corresponding to a different
\end_inset
images in your document, LyX has to do 50
-\begin_inset space \thinspace{}
+\begin_inset space ~
\end_inset
conversions whenever you view or export your document.
\end_inset
).
- It is particularly good at typesetting different scripts.
+ It is particularly good at typesetting different scripts, for example verticall
+y written Japanese.
\end_layout
\begin_layout Description
).
LuaTeX is still work in progress, but it might develop into the next standard
- tex processor.
+ TeX processor.
\end_layout
\begin_layout Standard
It does not itself contain images and the like but only links them, and
when LyX produces XHTML, it also generates corresponding images in formats
suitable for the purpose.
- Math is output as MathML, which renders nicely in browsers that support
- it, but not all do.
+ For the math output you can choose in the menu
+\family sans
+Document\SpecialChar \menuseparator
+Settings\SpecialChar \menuseparator
+Output
+\family default
+ between different formats, that are described in section
+\emph on
+Math Output in XHTML
+\emph default
+ of the
+\emph on
+Additional
+\begin_inset space ~
+\end_inset
+
+Features
+\emph default
+ manual.
\end_layout
\begin_layout Standard
, and not all LyX features are supported yet.
See the chapter
-\begin_inset Quotes eld
-\end_inset
-
+\emph on
LyX and the World Wide Web
-\begin_inset Quotes erd
-\end_inset
-
+\emph default
, in the
\emph on
Additional Features
\family sans
File\SpecialChar \menuseparator
Export\SpecialChar \menuseparator
-LyX-HTML
+LyXHTML
\family default
.
\end_layout
.
A viewing program will pop up showing the output in the defined default
output format, which is globally set in the preferences (see sec.
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
) and can also be altered for single documents in the document settings
(see sec.
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Standard
-Words aren't hyphenated within LyX but automatically in the output.
+Words are not hyphenated within LyX but automatically in the output.
Hyphenation is done by the LaTeX-package
\series bold
babel
\end_inset
.
- If LaTeX can't break a word correctly, you can set hyphenation points manually.
+ If LaTeX cannot break a word correctly, you can set hyphenation points
+ manually.
This is done with the menu
\family sans
Insert\SpecialChar \menuseparator
of the
\emph on
-EmbeddedObjects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
\begin_layout Standard
There's no way we can go into how TeX and LaTeX decide to break a page,
or how you can tweak that behavior.
- Some LaTeX books listed in the bibliography [such as
+ Some LaTeX books listed in the bibliography (such as
\begin_inset space ~
\end_inset
\end_inset
-] may have more information.
+) may have more information.
You will almost never need to worry about this, however.
\end_layout
\begin_layout Standard
The issues of this chapter are described in detail in the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
There you'll also find tips and tricks for special cases.
\begin_inset space ~
\end_inset
-Note This note type is for internal notes that won't appear in the output.
+Note This note type is for internal notes that will not appear in the output.
\begin_inset Newline newline
\end_inset
In this document the greyed out note color is redefined to blue.
How this can be done is explained in the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
\bar no
\begin_inset Foot
-status open
+status collapsed
\begin_layout Plain Layout
To close a footnote, click on the footnote box label.
\family default
ey are described in the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
\family default
is explained in the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual in section
\emph on
\begin_inset CommandInset ref
LatexCommand ref
-reference "sec:Figure-Floats"
+reference "sub:Figure-Floats"
\end_inset
This separation appears due to a double line: The cells of the first row
have a line below them and the cells of the second row have a line above
them.
- Here's an example table:
+ Here is an example table:
\end_layout
\begin_layout Standard
\end_layout
+\begin_layout Subsection
+Introduction
+\end_layout
+
\begin_layout Standard
A float is a block of text associated with some sort of label, which doesn't
have a fixed location.
Floats
\family default
.
- A box with a caption that has e.
-\begin_inset space \thinspace{}
-\end_inset
-
-g.
-\begin_inset space \space{}
-\end_inset
-
-the label
-\begin_inset Quotes eld
-\end_inset
-
-Figure
-\begin_inset space ~
-\end_inset
-
-#:
-\begin_inset Quotes erd
-\end_inset
-
- (# is the actual number) will be inserted into your document.
+ A box with a caption will be inserted into your document.
The label will automatically be translated to the document language in
the output.
After the label you can insert the caption text.
\end_layout
\begin_layout Subsection
-Float Types
+Examples
\end_layout
\begin_layout Subsubsection
Figure Floats
+\begin_inset CommandInset label
+LatexCommand label
+name "sub:Figure-Floats"
+
+\end_inset
+
+
\begin_inset Index idx
status collapsed
\end_inset
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Figure-Floats"
+\end_layout
+\begin_layout Standard
+Figure
+\begin_inset space ~
\end_inset
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "cap:Platypus"
-\begin_layout Standard
-The menu
+\end_inset
+
+ was created using the menu
\family sans
Insert\SpecialChar \menuseparator
Float\SpecialChar \menuseparator
Figure
\family default
- inserts a float with the label
-\begin_inset Quotes eld
-\end_inset
-
-
-\series bold
-Figure
-\begin_inset space ~
-\end_inset
-
-#:
-\series default
-
-\begin_inset Quotes erd
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "float-insert figure"
\end_inset
.
- Set the cursor above this label (or before it and press enter) and insert
- the image as described above to get the caption printed below the image.
- This is what we did for Figure
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "cap:Platypus"
-
+ The image was inserted by setting the cursor above the caption label and
+ using the menu
+\family sans
+Insert\SpecialChar \menuseparator
+Graphics
+\family default
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
\end_inset
.
- If you want the caption to be above the image, set the cursor at the end
- of the caption, press enter and insert the image.
- This was done in Figure
+ The image in the float was horizontally centered by putting the cursor
+ in front of or behind the image and using the menu
+\family sans
+Edit\SpecialChar \menuseparator
+Paragraph
\begin_inset space ~
\end_inset
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "cap:Escher"
-
+Settings
+\family default
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "layout-paragraph"
\end_inset
.
\align center
\begin_inset Graphics
filename clipart/platypus.eps
+ lyxscale 50
width 50col%
\end_inset
\end_inset
-\end_layout
-
-\begin_layout Standard
-\begin_inset Float figure
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "cap:Escher"
-
-\end_inset
-
-M.C.
- Escher on acid.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\align center
-\begin_inset Graphics
- filename clipart/escher-lsd.eps
- scale 80
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
\end_layout
\begin_layout Standard
Insert\SpecialChar \menuseparator
Label
\family default
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "label-insert"
+\end_inset
+
and refer to it using the menu
\family sans
Insert\SpecialChar \menuseparator
Cross-Reference
\family default
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset ref"
+\end_inset
+
.
It is important to use references to figure floats, rather than using vague
references like
Normally only one image is inserted in a figure float, but sometimes you
might want to use two images with separate subcaptions.
This can be done by inserting image floats into existing image floats.
- Note that only the main caption of the float is added to the List of Figures.
+ Note that only the main caption of the float is added to the List of Figures
+ as described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:List-of-Figures"
+
+\end_inset
+
+.
Figure
\begin_inset space ~
\end_inset
\begin_inset Float figure
wide false
sideways false
-status open
+status collapsed
\begin_layout Plain Layout
\begin_inset Caption
\begin_inset Float figure
wide false
sideways false
-status open
+status collapsed
\begin_layout Plain Layout
\begin_inset Caption
\end_layout
-\begin_layout Standard
-Note that the caption is added to the
-\family sans
-List
-\begin_inset space ~
-\end_inset
-
-of
-\begin_inset space ~
-\end_inset
-
-Figures
-\family default
- as described in section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:List-of-Figures"
-
-\end_inset
-
-.
-\end_layout
-
\begin_layout Subsubsection
Table Floats
\begin_inset Index idx
Float\SpecialChar \menuseparator
Table
\family default
+ or the toolbar botton
+\begin_inset Info
+type "icon"
+arg "float-insert table"
+\end_inset
+
.
They have the same properties as figure floats except for the different
label.
\end_inset
- is an example of a table float.
+ is a table float.
\end_layout
\begin_layout Standard
\end_inset
-A table float.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features tabularvalignment="middle">
-<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="top" width="0pt">
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-1
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-2
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-3
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-Joe
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-Mary
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-Ted
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-\begin_inset Formula $\int x^{2}dx$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-\begin_inset Formula $\left[\begin{array}{cc}
-a & b\\
-c & d
-\end{array}\right]$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\family roman
-\series medium
-\shape up
-\size normal
-\emph off
-\bar no
-\noun off
-\color none
-\begin_inset Formula $1+1=2$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-</row>
-</lyxtabular>
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Subsubsection
-Algorithm Floats
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-Floats ! Algorithm floats
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-This float type is inserted with the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Float\SpecialChar \menuseparator
-Algorithm
-\family default
-.
- It is used for program codes and descriptions of algorithms.
- A possible environment for algorithms is the
-\family sans
-LyX-Code
-\family default
-, described in section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:LyX-Code"
-
-\end_inset
-
-.
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
-
-\begin_layout Plain Layout
-
-\series bold
-Note:
-\series default
- that the float label is not automatically translated into the document
- language.
-\end_layout
-
-\end_inset
-
- You have to do this manually by adding the following line
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-floatname{algorithm}{your
-\begin_inset space ~
-\end_inset
-
-name}
-\end_layout
-
-\begin_layout Standard
-to the document preamble (menu
-\family sans
-Document\SpecialChar \menuseparator
-Settings
-\family default
-).
-
-\series bold
-your
-\begin_inset space ~
-\end_inset
-
-name
-\series default
- is the word
-\begin_inset Quotes eld
-\end_inset
-
-
-\emph on
-algorithm
-\emph default
-
-\begin_inset Quotes erd
-\end_inset
-
- in your language.
-\end_layout
-
-\begin_layout Subsubsection
-Wrap Floats
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-Floats ! Text Wrap Floats
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-\begin_inset Wrap figure
-lines 0
-placement l
-overhang 0in
-width "40col%"
-status open
-
-\begin_layout Plain Layout
-\begin_inset Graphics
- filename clipart/mobius.eps
- width 40col%
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "cap:Wrapped-figure"
-
-\end_inset
-
-This is a wrapped figure.
-\begin_inset VSpace medskip
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-This float type is used if you want to
-\begin_inset Quotes eld
-\end_inset
-
-wrap
-\begin_inset Quotes erd
-\end_inset
-
- text around a figure so that it only occupies some fraction of the column
- width.
- It can be inserted using the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Float\SpecialChar \menuseparator
-Wrap
-\begin_inset space ~
-\end_inset
-
-Float
-\family default
- if the LaTeX-package
-\series bold
-wrapfig
-\series default
-
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-LaTeX-packages ! wrapfig
-\end_layout
-
-\end_inset
-
- is installed.
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-Installing a LaTeX-package is explained it in the
-\emph on
-LaTeX
-\begin_inset space ~
-\end_inset
-
-Configuration
-\emph default
- manual.
-\end_layout
-
-\end_inset
-
- The width and placement of the float is adjusted by right-clicking on the
- float box.
- Figure
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "cap:Wrapped-figure"
-
-\end_inset
-
- is for example a figure wrap float with a width of 40
-\begin_inset space \thinspace{}
-\end_inset
-
-col%.
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-Available units are explained in Appendix
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "cha:Units-available-in"
-
-\end_inset
-
-.
-\end_layout
-
-\end_inset
-
- Some space was added under the caption to separate it better from the surroundi
-ng text.
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
-
-\begin_layout Plain Layout
-
-\series bold
-Note:
-\series default
- Wrap floats might be fragile! E.
-\begin_inset space \thinspace{}
-\end_inset
-
-g.
-\begin_inset space \space{}
-\end_inset
-
-having a figure too close to the bottom of the page can mess things up so
- that the float doesn't appear in the output or that it is placed over some
- other text.
-\end_layout
-
-\end_inset
-
- In general:
-\end_layout
-
-\begin_layout Itemize
-Wrap floats should not be placed in paragraphs that run over a page break.
- That means that wrap floats should preferably be inserted in the exact
- place when the document is nearly ready and you are able to estimate where
- page breaks will appear.
-\end_layout
-
-\begin_layout Itemize
-Wrap floats should either be placed in their own paragraph before the paragraph
- where they should wrap into, or within a paragraph.
-\end_layout
-
-\begin_layout Itemize
-Wrap floats in consecutive paragraphs may cause trouble, so make sure that
- there is a text paragraph between them as separator.
-\end_layout
-
-\begin_layout Itemize
-Wrap floats are not allowed in section headings or tables.
-\end_layout
-
-\begin_layout Subsection
-Rotated Floats
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Rotated-Floats"
-
-\end_inset
-
-
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-Floats ! Rotating
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-Especially for wide tables you might have floats rotated.
- To rotate a whole float including the caption, right-click on the float-box
- and use the option
-\family sans
-Rotate
-\begin_inset space ~
-\end_inset
-
-sideways
-\family default
-.
-\end_layout
-
-\begin_layout Standard
-Rotated floats are always placed on their own pages (or columns, when you
- have a multicolumn document).
- You can let them span several columns using the float settings option
-\family sans
-Span
-\begin_inset space ~
-\end_inset
-
-columns
-\family default
-.
- Floats are rotated so that you can read them from the outside margin.
- Forcing the rotation direction is explained in the
-\emph on
-Embedded Objects
-\emph default
- manual.
-\end_layout
-
-\begin_layout Standard
-Referencing rotated floats is the same like for normal floats; the caption
- format is also the same: Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "cap:Rotated-table"
-
-\end_inset
-
- is an example of a rotated table float.
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
-
-\begin_layout Plain Layout
-
-\series bold
-Note:
-\series default
- Not all DVI-viewers are able to display rotated floats.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-\begin_inset Float table
-wide false
-sideways true
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "cap:Rotated-table"
-
-\end_inset
-
- Rotated table
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="1" columns="5">
-<features tabularvalignment="middle">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-test
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-b
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-c
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-d
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-e
-\end_layout
-
-\end_inset
-</cell>
-</row>
-</lyxtabular>
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Subsection
-Float Placement
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Float-Placement"
-
-\end_inset
-
-
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-Floats ! Placement
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-Right-clicking on a float-box opens a dialog where you can alter the placement
- options that LaTeX uses for positioning the float.
-\begin_inset Newline newline
-\end_inset
-
-The option
-\family sans
-Span
-\begin_inset space ~
-\end_inset
-
-columns
-\family default
- is only useful for two-column documents: If you select it, the float will
- span both columns on the page instead of being confined to just one.
-\begin_inset Newline newline
-\end_inset
+A table float.
+\end_layout
-The option
-\family sans
-Rotate
-\begin_inset space ~
\end_inset
-sideways
-\family default
- is used to rotate floats, see section
-\begin_inset space ~
-\end_inset
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Rotated-Floats"
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\end_inset
+\begin_layout Plain Layout
-.
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
\end_layout
-\begin_layout Standard
-You can use one ore more of the following options in the float dialog to
- set the placement for a particular float when you uncheck the option
-\family sans
-Use
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-default
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-placement
-\family default
-:
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+2
\end_layout
-\begin_layout Description
-Here
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-if
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-possible: try to place the float at the position where it is inserted
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+3
\end_layout
-\begin_layout Description
-Top
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-of
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-page: try to place the float at the top of the current page
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+Joe
\end_layout
-\begin_layout Description
-Bottom
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-of
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-page: try to place the float at the bottom of the current page
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+Mary
\end_layout
-\begin_layout Description
-Page
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-of
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-floats: try to place the float at an own page
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+Ted
\end_layout
-\begin_layout Standard
-The order of the above option is
-\emph on
-always
-\emph default
- used by LaTeX.
- That means, if you use the default placement, LaTeX will first try out
-
-\family sans
-Here
-\begin_inset space ~
-\end_inset
-
-if
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-possible
-\family default
-, then
-\family sans
-Top
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-of
-\begin_inset space ~
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+\begin_inset Formula $\int x^{2}dx$
\end_inset
-page
-\family default
-, and then the others.
- If you don't use the default, LaTeX will try only the checked options but
- in the same order.
- If none of the 4 placements are possible the procedure is internally repeated
- but it is tried to put the float on the following page.
-\end_layout
-\begin_layout Standard
-By default, each option has its own rules:
\end_layout
-\begin_layout Standard
-
-\family sans
-Top
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-of
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-page
-\family default
- only floats occupying less than 70
-\begin_inset space \thinspace{}
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+\begin_inset Formula $\left[\begin{array}{cc}
+a & b\\
+c & d
+\end{array}\right]$
\end_inset
-% of the page can be placed at the top of a page
-\end_layout
-\begin_layout Standard
+\end_layout
-\family sans
-Bottom
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-of
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-page
-\family default
-: only floats occupying less than 30
-\begin_inset space \thinspace{}
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+\begin_inset Formula $1+1=2$
\end_inset
-% of the page can be placed at the bottom of a page.
-\end_layout
-\begin_layout Standard
+\end_layout
-\family sans
-Page
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+</lyxtabular>
-of
-\begin_inset space ~
\end_inset
-floats
-\family default
-: only if more than 50
-\begin_inset space \thinspace{}
-\end_inset
-% of the page are occupied by floats, several floats can be set together
- on a page.
\end_layout
-\begin_layout Standard
-If you don't like these rules, you can ignore them by using the additional
- option
-\family sans
-Ignore
-\begin_inset space ~
\end_inset
-LaTeX
-\begin_inset space ~
-\end_inset
-rules
-\family default
-.
\end_layout
-\begin_layout Standard
-Sometimes you might need, under all circumstances, a float to be placed
- exactly at the position where it is inserted.
- For this case you can use the option
-\family sans
-Here
-\begin_inset space ~
-\end_inset
+\begin_layout Subsection
+More Information
+\begin_inset Index idx
+status collapsed
-definitely
-\family default
-.
- Use this option very rarely and only if the document is nearly ready to
- be printed.
- Because the float is then no longer able to
-\begin_inset Quotes eld
-\end_inset
+\begin_layout Plain Layout
+Floats ! Details
+\end_layout
-float
-\begin_inset Quotes erd
\end_inset
- when you change your document, this will often destroy the page layout.
-\end_layout
-\begin_layout Standard
-There are no placement options for text wrap floats, because they are always
- surrounded by the text of a certain paragraph.
\end_layout
\begin_layout Standard
-For more details about float placements, have a look at LaTeX books like
+LyX offers you further float types as well as rotated floats.
+ It also allows you to change the float numbering scheme, to control the
+ float placement and to change the formatting and placement of the float
+ caption.
+ All these features are explained in detail with many examples in chapter
-\begin_inset CommandInset citation
-LatexCommand cite
-key "latexcompanion,latexguide,latexbook"
-
+\emph on
+Floats
+\emph default
+ of the the
+\emph on
+Embedded
+\begin_inset space ~
\end_inset
-.
+Objects
+\emph default
+ manual.
\end_layout
\begin_layout Section
\emph default
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
\end_inset
+\begin_inset Newline newline
+\end_inset
+
+You can select which LaTeX-package should be used for this feature by setting
+ the option
+\family sans
+Use refstyle (not prettyref) for cross-references
+\family default
+ in the menu
+\family sans
+Document\SpecialChar \menuseparator
+Settings\SpecialChar \menuseparator
+Document Class
+\family default
+.
+ The format is specified by adding the command
+\series bold
+
+\backslash
+newrefformat
+\series default
+ (prettyref) or
+\series bold
+
+\backslash
+newref
+\series default
+ (refstyle) to the preamble of the document.
+ For example redefining all references to figures (which have the label
+ shortcut
+\begin_inset Quotes eld
+\end_inset
+
+
+\family sans
+fig
+\family default
+
+\begin_inset Quotes erd
+\end_inset
+
+) can be done with this command
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
+
+\backslash
+newref{fig}{refcmd={Image on page
+\backslash
+pageref{#1}}}
+\series default
+
+\begin_inset Newline newline
+\end_inset
+
+For more information about the format, have a look at the package documentations
+,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "prettyref,refstyle"
+
+\end_inset
+
+.
\end_layout
\begin_layout Description
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
status collapsed
\begin_layout Plain Layout
-They are also useful simply for keeping a database of articles and notes
- concerning them.
+They are also useful for keeping a database of articles and notes concerning
+ them.
Most of the database programs mentioned below allow you to store annotations
and reviews along with bibliographical information.
\end_layout
\begin_inset CommandInset href
LatexCommand href
-target "http://www.ctan.org/get/biblio/bibtex/contrib/doc/btxhak.pdf"
+target "http://mirrors.ctan.org/biblio/bibtex/contrib/doc/btxhak.pdf"
\end_inset
\begin_layout Standard
To generate the bibliography from a database, LyX uses the program BibTeX.
- This program can be controlled with options that you can add in LyX's preferenc
-es dialog under
+ You can choose which of its variants should be used by LyX as processor;
+ either in the document settings under
+\family sans
+Bibliography
+\family default
+ or in LyX's preferences under
\family sans
-Outputs\SpecialChar \menuseparator
+Output\SpecialChar \menuseparator
LaT
\begin_inset ERT
status collapsed
eX
\family default
- in the
-\family sans
-BibT
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-{}
+.
+ The following variants are possible:
\end_layout
+\begin_layout Description
+biber provides full Unicode support, unlimited memory, does not work with
+ other bibliography packages (like e.
+\begin_inset space \thinspace{}
\end_inset
-eX
+g.
\begin_inset space ~
\end_inset
-command
+
+\series bold
+natbib
+\series default
+), only with the package
+\series bold
+biblatex
+\series default
+; recommended for multilingual texts and for languages that don't use Latin
+ letters
+\end_layout
+
+\begin_layout Description
+bibtex the standard; does not allow special characters in bibliography entries
+ that are not possible to encode in a 7-bit encoding, limited memory, works
+ with all bibliography packages, except of
+\series bold
+biblatex
+\end_layout
+
+\begin_layout Description
+bibtex8 allows all characters that are possible to encode in a 8-bit encoding,
+ larger memory than
+\family sans
+bibtex
\family default
- field.
+, works with all.bibliography packages
+\end_layout
+
+\begin_layout Standard
+BibTeX can be controlled with options that you can add below the specification
+ of the variants.
Before adding options, it is strongly recommended to read the manual of
\family sans
Normally an index entry will appear with the page number of the indexed
section.
But sometimes you want to index more pages under the same entry.
- E.g if we want to index the paragraph environments, we create an index entry
+ E.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+if we want to index the paragraph environments, we create an index entry
in section
\begin_inset space ~
\end_inset
xindy
\family default
, however, this won't work for anything other than bold or italic text.
- This is because xindy requires you
-\change_deleted 5863208 1304031984
-
-\change_unchanged
- to define semantic elements before they can be used, see
+ This is because xindy requires you to define semantic elements before they
+ can be used, see
\begin_inset CommandInset citation
LatexCommand cite
after "p. 678 ff."
or the options in
\family sans
Document\SpecialChar \menuseparator
-Settings\SpecialChar \ldots{}
-\SpecialChar \menuseparator
+Settings\SpecialChar \menuseparator
Indexes
\family default
.
To set up LyX for the use of multiple indexes, go to
\family sans
Document\SpecialChar \menuseparator
-Settings\SpecialChar \ldots{}
-\SpecialChar \menuseparator
+Settings\SpecialChar \menuseparator
Indexes
\family default
and select
\begin_layout Section
Customized Page Headers and Footers
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Customized-Page-Headers"
+
+\end_inset
+
+
\begin_inset Index idx
status collapsed
\begin_inset CommandInset ref
LatexCommand ref
-reference "cha:The-Document-Settings"
+reference "chap:The-Document-Settings"
\end_inset
File
\family default
menu are the basic operations in addition to some more advanced operations.
- At the end of the menu the four last opened documents are listed.
\end_layout
\begin_layout Subsection
\family sans
CJK
+\family default
+
\begin_inset space ~
\end_inset
-LyX
-\family default
-format of the special LyX 1.4.x versions for Chinese, Japanese, and Korean
- (CJK)
+L
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+yX format of the special LyX
+\begin_inset space ~
+\end_inset
+
+1.4.x versions for Chinese, Japanese and Korean (CJK)
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
+DocBook text file with code in the language SGML that is used for the markup
+ language
+\family typewriter
+DocBook
+\end_layout
+
+\begin_layout Description
+DocBook
+\begin_inset space ~
+\end_inset
+
+(XML) text file with code in the language XML that is used for the markup
+ language
+\family typewriter
+DocBook
+\end_layout
+\begin_layout Description
+DraftDVI LaTeX's native DVI-format.
+ This format is not suitable if you have special characters or spaces in
+ files paths or file names in your document.
+ LyX use this format internally as a pre-stage to export to
\family sans
DVI
\family default
- DVI-format
+.
+\end_layout
+
+\begin_layout Description
+DVI DVI-format that also allows to use special characters or spaces in files
+ paths or file names
+\end_layout
+
+\begin_layout Description
+DVI
+\begin_inset space ~
+\end_inset
+
+(LuaT
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+eX) DVI-format using the program
+\family typewriter
+LuaTeX
+\family default
+; supports Unicode and the usage of non-TeX fonts;
+\series bold
+
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ not all DVI-viewers are currently able to display this output format properly.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Graphviz
+\begin_inset space ~
+\end_inset
+
+Dot text file with code in the programming language
+\family typewriter
+Dot
+\family default
+ that is used to draw visualizations of graphs via the program
+\family typewriter
+Graphviz
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
+(
+\family default
+LuaT
+\family sans
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+
+\family default
+eX
+\family sans
+)
+\family default
+text file with the LaTeX source that it is compilable with the program
+\family typewriter
+LuaTeX
+\end_layout
+
+\begin_layout Description
+
+\family sans
+LaT
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+eX
+\begin_inset space ~
+\end_inset
+
(pdflatex)
\family default
text file with the LaTeX source, additionally all images used in the document
\end_layout
\begin_layout Description
-LyX
+
+\family sans
+LaT
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+eX
+\begin_inset space ~
+\end_inset
+
+(
+\family default
+XeT
+\family sans
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+
+\family default
+eX
+\family sans
+)
+\family default
+text file with the LaTeX source that it is compilable with the program
+\family typewriter
+XeTeX
+\end_layout
+
+\begin_layout Description
+LilyPond
+\begin_inset space ~
+\end_inset
+
+book
+\begin_inset space ~
+\end_inset
+
+(La
+\family sans
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+
+\family default
+TeX) text file with the LaTeX source and also code in the syntax of the
+ music notation software
+\family typewriter
+LilyPond
+\end_layout
+
+\begin_layout Description
+L
+\family sans
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+
+\family default
+yX
+\begin_inset space ~
+\end_inset
+
+Archive
\begin_inset space ~
\end_inset
-1.y.x LyX-document in a format readable by the LyX versions 1.y.x (
+(zip) creates a zip-archive file that contains your document and all files
+ that are necessary to compile it (images, child documents, BibTeX files,
+ etc.)
+\end_layout
+
+\begin_layout Description
+L
+\family sans
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+
+\family default
+yX
+\begin_inset space ~
+\end_inset
+
+z.y.x LyX-Document in a format readable by the LyX versions z.y.x (
+\begin_inset Quotes eld
+\end_inset
+
+z
+\begin_inset Quotes erd
+\end_inset
+
+ and
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- is replaced by the version number)
+ represent the version number)
\end_layout
\begin_layout Description
-LyXHTML HTML-format, using LyX's internal XHTML engine
+L
+\family sans
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+
+\family default
+yXHTML HTML-format using LyX's internal XHTML engine
\end_layout
\begin_layout Description
-OpenDocument OpenDocument-formatted text file, to be opened with
+NoWeb text file with code in the format of the literate programming language
+\family typewriter
+ NoWeb
+\end_layout
+
+\begin_layout Description
+OpenDocument OpenDocument-formatted file, to be opened with
\family sans
OpenOffice
\family default
PDF-format using the program
\family typewriter
dvipdfm
+\family default
+, produces internally a DVI-file which is then converted to a PDF-file
+\end_layout
+
+\begin_layout Description
+
+\family sans
+PDF
+\begin_inset space ~
+\end_inset
+
+(LuaT
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+eX)
+\family default
+ PDF-format using the program
+\family typewriter
+LuaTeX
+\family default
+, produces PDF-files directly
\end_layout
\begin_layout Description
PDF-format using the program
\family typewriter
pdflatex
+\family default
+, produces PDF-files directly
\end_layout
\begin_layout Description
PDF-format using the program
\family typewriter
ps2pdf
+\family default
+, produces internally a PostScript-file which is then converted to a PDF-file
+\end_layout
+
+\begin_layout Description
+
+\family sans
+PDF
+\begin_inset space ~
+\end_inset
+
+(XeT
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+eX)
+\family default
+ PDF-format using the program
+\family typewriter
+XeTeX
+\family default
+, produces PDF-files directly
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-
-\family sans
-Custom
+Sweave text file with the LaTeX source and also code in the statistical
+ programming language
+\family typewriter
+R
\family default
- custom format
-\end_layout
-
-\begin_layout Standard
-The program
+.
+ Using the
\family typewriter
-dvipdfm
+R
\family default
- produces internally a DVI-file which is then converted to a PDF-file.
- It is a bit out of date and therefore the output could look different from
- what you want.
-
+-function
\family typewriter
-pdflatex
+Sweave
\family default
- produces PDF-files directly and supports the latest PDF-file formats.
+ it is possible to use
+\family typewriter
+R
+\family default
+-commands in LaTeX
\end_layout
\begin_layout Standard
\end_layout
-\begin_layout Standard
-The menu
-\family sans
-Custom
-\family default
- allows you to export your file by using special command line options for
- the export program.
-\end_layout
-
\begin_layout Subsection
Print
\end_layout
\end_layout
\begin_layout Subsection
-Find & Replace
+Find & Replace (Quick)
\end_layout
\begin_layout Standard
.
\end_layout
+\begin_layout Subsection
+Find & Replace (Advanced)
+\end_layout
+
+\begin_layout Standard
+Described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Advanced-Find-and"
+
+\end_inset
+
+.
+\end_layout
+
\begin_layout Subsection
Move Paragraph Up/Down
\end_layout
\begin_layout Standard
This menu entry generates the output you have specified as default output
format either in the preferences (see sec.
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
\end_inset
) or in the document settings (see sec.
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
\end_inset
-), for instance PDF, and opens it in an appropriate viewer.
+) and opens it in an appropriate viewer.
+ The default output format is
+\family sans
+PDF
+\begin_inset space ~
+\end_inset
+
+(pdflatex)
+\family default
+.
\end_layout
\begin_layout Subsection
\emph default
in the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual for more information on this topic).
This item allows you to view the master document from within its child.
\begin_layout Standard
The format used by this function is the default output format as specified
in the preferences (see sec.
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
\end_inset
) or in the document settings (see sec.
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
\emph default
in the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual for more information on this topic).
This item allows you to update the view of a master document from within
\begin_layout Standard
The format used by this function is the default output format as specified
in the preferences (see sec.
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
\end_inset
) or in the document settings (see sec.
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Description
-Hyphenation
-\begin_inset space ~
-\end_inset
-
-Point Inserts a hyphenation point, see section
+Phantom Inserts Phantom space, see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Hyphenation"
+reference "sub:Phantom-Space"
\end_inset
\end_layout
\begin_layout Description
-Phantom Inserts Phantom space, see section
+Hyphenation
+\begin_inset space ~
+\end_inset
+
+Point Inserts a hyphenation point, see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Phantom-Space"
+reference "sub:Hyphenation"
\end_inset
\emph default
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
\emph default
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
\emph default
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
\emph default
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
\emph default
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
on a cross-reference box.
\end_layout
+\begin_layout Subsection
+Forward Search
+\end_layout
+
+\begin_layout Standard
+This feature allows you to directly jump to the corresponding text part
+ in the output, see section
+\emph on
+Forward
+\begin_inset space ~
+\end_inset
+
+search
+\emph default
+ in the
+\emph on
+Additional
+\begin_inset space ~
+\end_inset
+
+Features
+\emph default
+ manual for a detailed description.
+\end_layout
+
\begin_layout Section
The Document Menu
\begin_inset Index idx
\begin_inset CommandInset ref
LatexCommand ref
-reference "cha:The-Document-Settings"
+reference "chap:The-Document-Settings"
\end_inset
\end_layout
\begin_layout Standard
-Counts the number of words and characters in the actual document or the
- highlighted document part.
+Counts the words and characters in the actual document or the highlighted
+ document part.
\end_layout
\begin_layout Subsection
\begin_inset CommandInset ref
LatexCommand ref
-reference "cha:The-Preferences-dialog"
+reference "chap:The-Preferences-dialog"
\end_inset
\end_layout
\begin_layout Standard
-This menu opens the documentation files of LyX in the language of LyX's
+This menu lists the documentation files of LyX in the language of LyX's
menus.
+ Is a file not available in this language, the English version will be listed.
\end_layout
\begin_layout Standard
in the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual, the math macro toolbar
\begin_inset Index idx
The Document Settings
\begin_inset CommandInset label
LatexCommand label
-name "cha:The-Document-Settings"
+name "chap:The-Document-Settings"
\end_inset
and you can decide to use them or not.
If you don't exactly know what the default class options are for, it is
recommended not to touch them.
- The graphics driver is used for LaTeX's graphics, color and page layout
- packages.
+ The
+\family sans
+Graphics driver
+\family default
+ is used for LaTeX's graphics, color and page layout packages.
When using
\family sans
Default
status collapsed
\begin_layout Plain Layout
-When you want one of the following drivers
+When you want to use one of the following drivers
\begin_inset Newline newline
\end_inset
+
+\family sans
dvi2ps, dvialw, dvilaser, dvitops, psprint, pubps, ln
+\family default
+
\begin_inset Newline newline
\end_inset
2 in
\begin_inset CommandInset href
LatexCommand href
-target "http://tug.ctan.org/get/macros/latex/required/graphics/grfguide.pdf"
+target "http://mirrors.ctan.org/macros/latex/required/graphics/grfguide.pdf"
\end_inset
\emph default
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual.
\end_layout
+\begin_layout Standard
+There is also an option to suppress the date and one to use the LaTeX-package
+
+\series bold
+refstyle
+\series default
+ instead of
+\series bold
+prettyref
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! prettyref
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! refstyle
+\end_layout
+
+\end_inset
+
+ for cross-references, see sec.
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Cross-References"
+
+\end_inset
+
+.
+\end_layout
+
\begin_layout Section
Child Documents
\end_layout
This submenu is only visible when your document includes child documents.
Please refer to the section
\emph on
-Child Documents
+Child
+\begin_inset space ~
+\end_inset
+
+Documents
\emph default
of the
\emph on
-Embedded Objects
+Embedded
+\begin_inset space ~
+\end_inset
+
+Objects
\emph default
manual for details.
\end_layout
.
\end_layout
+\begin_layout Section
+Local Layout
+\end_layout
+
+\begin_layout Standard
+See section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Local-Layout"
+
+\end_inset
+
+ for a description.
+\end_layout
+
\begin_layout Section
Fonts
\end_layout
\end_layout
\begin_layout Standard
-Note that LyX won't show two columns or the set up line spacing on screen.
- That's impractical, often unreadable, and not part of the WYSIWYM concept.
+Note that LyX will not show two columns or the set up line spacing on screen.
+ That is impractical, often unreadable, and not part of the WYSIWYM concept.
However, it will be as you specified it in the output.
\end_layout
-\begin_layout Standard
-The listings settings are explained in the corresponding section in the
-
-\emph on
-Embedded Objects
-\emph default
- manual.
-\end_layout
-
\begin_layout Section
Page Layout
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Paper-Size,-Orientation,"
+reference "sub:Paper-Size,-Orientation"
\end_inset
\begin_layout Section
Language
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Language-encodings"
+
+\end_inset
+
+
\begin_inset Index idx
status collapsed
status collapsed
\begin_layout Plain Layout
-The known commands are defined in a text file.
+The known commands are defined in a text file (
+\emph on
+unicodesymbols
+\emph default
+).
You can add commands for unknown symbols to that file yourself, see the
\emph on
(LuaTeX)
\family default
-; see section
+, see section
\begin_inset space ~
\end_inset
\end_inset
-), so if the above options fail, you might try out one of these new engines.
+).
+ So if you are using many special or accented characters and
+\family sans
+Language Default
+\family default
+ fails, you might try out one of these new engines.
+\end_layout
+
+\begin_layout Standard
+The
+\family sans
+Language
+\begin_inset space ~
+\end_inset
+
+package
+\family default
+ determines the LaTeX-package that is used for hyphenation and the translation
+ of strings like
+\begin_inset Quotes eld
+\end_inset
+
+Part
+\begin_inset Quotes erd
+\end_inset
+
+.
+ The possible settings are:
+\end_layout
+
+\begin_layout Description
+Default is the package
+\series bold
+babel
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! babel
+\end_layout
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+Automatic selects the most suitable language package for the view/export
+ format you will use.
+ For example for the XeTeX formats the package
+\series bold
+polyglossia
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! polyglossia
+\end_layout
+
+\end_inset
+
+ will be used instead of
+\series bold
+babel
+\series default
+.
+\end_layout
+
+\begin_layout Description
+Always
+\begin_inset space ~
+\end_inset
+
+Babel uses in every case
+\series bold
+babel
+\series default
+.
+\end_layout
+
+\begin_layout Description
+Custom allows you to specify a language package command of your choice.
+ For example if you want to use a language-specific package like
+\series bold
+ngerman
+\series default
+ (for German texts), type in
+\series bold
+
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+usepackage{ngerman}
+\end_layout
+
+\begin_layout Description
+None will not use a language package.
+ This necessary for some document classes for scientific articles.
\end_layout
\begin_layout Standard
\end_inset
-, you can enable subdivided bibliographies using the LaTeX package
+.
+ You can enable subdivided bibliographies using the LaTeX package
\series bold
bibtopic
\series default
\end_inset
- and
+,
\series bold
esint
\series default
\end_inset
- or to use them automatically when they are needed.
+, mathdots
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! mathdots
\end_layout
-\begin_layout Standard
+\end_inset
+ und
\series bold
-amsmath
+mhchem
\series default
- is needed for many constructs, so when you get LaTeX-errors in formulas,
- ensure that you have enabled AMS.
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! mhchem
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-esint
-\series default
- is used for special integral characters.
+ or to use them automatically when they are needed.
+\end_layout
+
+\begin_layout Description
+amsmath is needed for many constructs, so when you get LaTeX-errors in formulas,
+ ensure that you have enabled
+\family sans
+AMS
+\begin_inset space ~
+\end_inset
+
+math
+\family default
+.
+\end_layout
+
+\begin_layout Description
+esint is used for special integral characters, see section
+\emph on
+Big
+\begin_inset space ~
+\end_inset
+
+Operators
+\emph default
+ of the
+\emph on
+Math
+\emph default
+ manual.
+\end_layout
+
+\begin_layout Description
+mathdots is used for special ellipses, see section
+\emph on
+Ellipses
+\emph default
+ of the
+\emph on
+Math
+\emph default
+ manual.
+\end_layout
+
+\begin_layout Description
+mhchem is used for chemical equations, see section
+\emph on
+Chemical Symbols and Equations
+\emph default
+ of the
+\emph on
+Math
+\emph default
+ manual.
\end_layout
\begin_layout Section
\end_layout
\begin_layout Standard
-The float placement options are described in section
+The float placement options are described in section
+\emph on
+Float
\begin_inset space ~
\end_inset
+Placement
+\emph default
+ of the
+\emph on
+Embedded
+\begin_inset space ~
+\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Float-Placement"
+Objects
+\emph default
+ manual.
+\end_layout
+
+\begin_layout Section
+Listings
+\end_layout
+\begin_layout Standard
+The listings settings are explained in chapter
+\emph on
+Program Code Listings
+\emph default
+ of the
+\emph on
+Embedded
+\begin_inset space ~
\end_inset
-.
+Objects
+\emph default
+ manual.
\end_layout
\begin_layout Section
\family sans
Tools\SpecialChar \menuseparator
Preferences\SpecialChar \menuseparator
-File Formats; see
+File Formats
\family default
+, see sec.
+\begin_inset space \thinspace{}
+\end_inset
+
\begin_inset CommandInset ref
LatexCommand formatted
\end_inset
-
+.
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-Output
-\begin_inset Note Note
-status open
-
-\begin_layout Plain Layout
-TODO!
-\end_layout
-
+Output settings for the menu
+\family sans
+Navigate\SpecialChar \menuseparator
+Forward
+\begin_inset space ~
\end_inset
+search
+\family default
+.
+ For a detailed description see section
+\emph on
+Reverse DVI/PDF search
+\emph default
+ of the
+\emph on
+Additional
+\begin_inset space ~
+\end_inset
+Features
+\emph default
+ manual.
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-Options
-\begin_inset Note Note
-status open
+Options settings for the export format
+\family sans
+LyXHTML
+\family default
+.
+
+\family sans
+Strict XHTML
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-TODO!
-\end_layout
+1.1
+\family default
+ will assure that the output follows exactly version
+\begin_inset space ~
+\end_inset
+1.1 of the XHTML standard.
+ The different
+\family sans
+Math
+\begin_inset space ~
\end_inset
+output
+\family default
+ settings are described in detail in section
+\emph on
+Math Output in XHTML
+\emph default
+ of the
+\emph on
+Additional
+\begin_inset space ~
+\end_inset
+Features
+\emph default
+ manual.
+ The scaling is used for the size of equations in the output.
\end_layout
\begin_layout Section
Dialog
\begin_inset CommandInset label
LatexCommand label
-name "cha:The-Preferences-dialog"
+name "chap:The-Preferences-dialog"
\end_inset
\family default
setting.
You can also change the font zoom outside the preferences dialog for the
- current LyX session by pressing Ctrl and scrolling the mouse wheel.
+ current LyX session by pressing
+\family sans
+Ctrl
+\family default
+ and scrolling the mouse wheel.
\end_layout
\begin_layout Standard
\family typewriter
JabRef
\family default
- bearbeiten.
+.
In
\family typewriter
JabRef
\series bold
babel
\series default
-, it's the default language package in classic LaTeX.
- However, more recent typesetting engines such as XeTeX and LuaTeX come
- with an alternative language package (
-\series bold
-polyglossia
-\series default
-) that is more suited for the multi-script support of these engines.
- Furthermore, there are also specific language packages for languages not
- covered by babel.
-\begin_inset Newline newline
-\end_inset
-The available selections are:
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! babel
\end_layout
-\begin_deeper
-\begin_layout Itemize
-\noindent
+\end_inset
+, it is the default language package in classic LaTeX.
+ However, more recent typesetting engines such as XeTeX and LuaTeX come
+ with the alternative language package
\series bold
-Automatic
-\series default
-:
-\series bold
-
+polyglossia
\series default
-Selects the most appropriate language package for the current typesetting
- engine (default)
-\end_layout
-\begin_layout Itemize
-\noindent
+\begin_inset Index idx
+status collapsed
-\series bold
-Always babel:
-\series default
-Uses always babel, even if another package (such as polyglossia) would have
- been preferred by automatic setting; this essentially allows to select
- babel instead of polyglossia with XeTeX and LuaTeX
+\begin_layout Plain Layout
+LaTeX-packages ! polyglossia
\end_layout
-\begin_layout Itemize
-\noindent
+\end_inset
-\series bold
-Custom:
-\series default
-Lets you load some other language package (via
-\family typewriter
+ that is more suited for the multi-script support of these engines.
+ Furthermore, there are also specific language packages for languages not
+ covered by babel.
+ The available selections are described in sec.
+\begin_inset space \thinspace{}
+\end_inset
-\backslash
-usepackage
-\series bold
-{
-\series default
-packagename}
-\family default
-)
-\end_layout
-\begin_layout Itemize
-\noindent
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Language-encodings"
-\series bold
-None:
-\series default
-Loads no language package at all
+\end_inset
+
+.
\end_layout
-\end_deeper
\begin_layout Description
Default
\begin_inset space ~
\end_layout
-\begin_layout Description
-Adapt
-\begin_inset space ~
-\end_inset
-
-output
-\begin_inset space ~
-\end_inset
-
-to
-\begin_inset space ~
-\end_inset
-
-printer This option works only for the
-\family sans
-Printer command
-\family default
-
-\begin_inset Quotes eld
-\end_inset
-
-
-\family sans
-dvips
-\family default
-
-\begin_inset Quotes erd
-\end_inset
-
-.
- It activates a configuration file for dvips.
- This is an option only for dvips experts.
-\end_layout
-
\begin_layout Description
Printer
\begin_inset space ~
you are using.
\end_layout
+\begin_layout Description
+Adapt
+\begin_inset space ~
+\end_inset
+
+output
+\begin_inset space ~
+\end_inset
+
+to
+\begin_inset space ~
+\end_inset
+
+printer This option works only for the
+\family sans
+Printer command
+\family default
+
+\begin_inset Quotes eld
+\end_inset
+
+
+\family sans
+dvips
+\family default
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+ It activates a configuration file for dvips.
+ This is an option only for dvips experts.
+\end_layout
+
\begin_layout Subsection
Date Format
\begin_inset Index idx
\end_inset
+\end_layout
+
+\begin_layout Bibliography
+\labelwidthstring Literaturverzeichnis
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "prettyref"
+
+\end_inset
+
+
+\begin_inset CommandInset href
+LatexCommand href
+name "Documentation"
+target "http://www.ctan.org/tex-archive/macros/latex/contrib/prettyref/prettyref.pdf"
+
+\end_inset
+
+ of the LaTeX-package
+\series bold
+prettyref
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! prettyref
+\end_layout
+
+\end_inset
+
+:
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://www.ctan.org/tex-archive/macros/latex/contrib/prettyref/prettyref.pdf
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Bibliography
+\labelwidthstring Literaturverzeichnis
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "refstyle"
+
+\end_inset
+
+
+\begin_inset CommandInset href
+LatexCommand href
+name "Documentation"
+target "http://mirrors.ctan.org/macros/latex/contrib/refstyle/refstyle.pdf"
+
+\end_inset
+
+ of the LaTeX-package
+\series bold
+refstyle
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! refstyle
+\end_layout
+
+\end_inset
+
+:
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Flex URL
+status collapsed
+
+\begin_layout Plain Layout
+
+http://mirrors.ctan.org/macros/latex/contrib/refstyle/refstyle.pdf
+\end_layout
+
+\end_inset
+
+
\end_layout
\begin_layout Bibliography