-#LyX 2.1 created this file. For more info see http://www.lyx.org/
-\lyxformat 474
+#LyX 2.2 created this file. For more info see http://www.lyx.org/
+\lyxformat 487
\begin_document
\begin_header
\textclass article
\html_latex_end </span>
\author -1379302345 "Julien Rioux" jrioux@lyx.org
\author -712698321 "Jürgen Spitzmüller"
+\author -195340706 "Georg Baum"
+\author 155139281 "Jrgen Spitzmller"
\end_header
\begin_body
\begin_layout Title
-Inventory of your LaTeX configuration
+Inventory of your \SpecialChar LaTeX
+ configuration
\end_layout
\begin_layout Author
-Automatically generated by LyX (do not edit).
+Automatically generated by \SpecialChar LyX
+ (do not edit).
\end_layout
\begin_layout Standard
-This file describes the different LaTeX add-ons that LyX can handle.
+This file describes the different \SpecialChar LaTeX
+ add-ons that \SpecialChar LyX
+ can handle.
Below you'll find six sections:
\end_layout
\begin_layout Enumerate
-Some basic details about your LaTeX installation.
- In particular, you should make sure that your version of LaTeX is recent
- enough.
+Some basic details about your \SpecialChar LaTeX
+ installation.
+ In particular, you should make sure that your version of \SpecialChar LaTeX
+ is recent enough.
\end_layout
\begin_layout Enumerate
-Some common fonts that LyX knows about.
+Some common fonts that \SpecialChar LyX
+ knows about.
This is rather sparse at the moment.
\end_layout
\begin_layout Enumerate
-The document classes that should be standard on any LaTeX implementation.
+The document classes that should be standard on any \SpecialChar LaTeX
+ implementation.
This section is only here for completeness.
\end_layout
\begin_layout Enumerate
-Some optional document classes that LyX knows about.
+Some optional document classes that \SpecialChar LyX
+ knows about.
If one of these is marked as missing (the
\begin_inset Quotes eld
\end_inset
status collapsed
\begin_layout Plain Layout
-The participating hosts in the Comprehensive TeX Archive Network are:
+The participating hosts in the Comprehensive \SpecialChar TeX
+ Archive Network are:
\end_layout
\begin_layout LyX-Code
item.
Note that only detected document classes can be selected as document layouts
- in LyX.
+ in \SpecialChar LyX
+.
\end_layout
\begin_layout Enumerate
\begin_inset Quotes erd
\end_inset
- by the LaTeX maintainers.
+ by the \SpecialChar LaTeX
+ maintainers.
These ones should definitely be present, but you may not have some of them
- if your LaTeX distribution is a bit old.
+ if your \SpecialChar LaTeX
+ distribution is a bit old.
\end_layout
\begin_layout Enumerate
-Some packages that LyX uses when you try to change the margins of your document.
+Some packages that \SpecialChar LyX
+ uses when you try to change the margins of your document.
The detection of these items does not yet affect the options available
- inside LyX.
+ inside \SpecialChar LyX
+.
\end_layout
\begin_layout Enumerate
-Some common LaTeX packages that you might need with LyX, and you might also
- want to add to your LaTeX installation.
+Some common \SpecialChar LaTeX
+ packages that you might need with \SpecialChar LyX
+, and you might also want
+ to add to your \SpecialChar LaTeX
+ installation.
The detection of these items does not yet affect the options available
- inside LyX.
+ inside \SpecialChar LyX
+.
\end_layout
\begin_layout Standard
-Note that most of these packages will be available if you use a modern TeX
- distribution such as TeXLive and MiKTeX.
- If you decide to install one of the missing items, you should tell LyX
- about it.
+Note that most of these packages will be available if you use a modern \SpecialChar TeX
+
+ distribution such as \SpecialChar TeX
+Live and MiK\SpecialChar TeX
+.
+ If you decide to install one of the missing items, you should tell \SpecialChar LyX
+ about
+ it.
After the installation, please use the menu entry
\family sans
-Tools\SpecialChar \menuseparator
+Tools\SpecialChar menuseparator
Reconfigure
\family default
and reload this file to see if the new package was recognized.
\begin_inset Quotes erd
\end_inset
-, it means that LyX could not do the inventory of your LaTeX configuration
- for some reason.
+, it means that \SpecialChar LyX
+ could not do the inventory of your \SpecialChar LaTeX
+ configuration for some
+ reason.
In most cases, you only have forgotten to update the file name database
(texhash).
- Check the documentation of your LaTeX distribution for how this is done
- properly.
+ Check the documentation of your \SpecialChar LaTeX
+ distribution for how this is done properly.
\end_layout
\begin_layout Section
\family sans
AE
\family default
- package provide virtual PostScript versions of LaTeX's standard font (
+ package provide virtual PostScript versions of \SpecialChar LaTeX
+'s standard font (
\emph on
Computer Modern
\emph default
\emph on
Bera Mono
\emph default
- (a matching monospaced\SpecialChar \slash{}
+ (a matching monospaced\SpecialChar breakableslash
typewriter font).
\end_layout
\emph on
Computer Modern
\emph default
- family that were the default TeX fonts.
+ family that were the default \SpecialChar TeX
+ fonts.
The
\emph on
EC
Computer Modern
\emph default
.
- With modern LaTeX distributions, the EC fonts are used automatically as
- a default (or if you select
+ With modern \SpecialChar LaTeX
+ distributions, the EC fonts are used automatically as a default
+ (or if you select
\emph on
Computer Modern
\emph default
\family sans
eco
\family default
- package is used by LyX to access the old style numerals of the
+ package is used by \SpecialChar LyX
+ to access the old style numerals of the
\emph on
-Computer Modern\SpecialChar \slash{}
+Computer Modern\SpecialChar breakableslash
EC
\emph default
font family.
feyn
\family default
provides a font for in-text Feynman diagrams.
- It is used by LyX if you insert such diagrams in formulas (LaTeX command
-
+ It is used by \SpecialChar LyX
+ if you insert such diagrams in formulas (\SpecialChar LaTeX
+ command
\family typewriter
\backslash
\family default
provides access to your Operating System's OpenType, TrueType and PostScript
fonts.
- The package needs either the XeTeX or the LuaTeX engine for this.
- Note that LuaTeX is only supported as of fontspec version 2.0 (2010/07/11).
+ The package needs either the Xe\SpecialChar TeX
+ or the Lua\SpecialChar TeX
+ engine for this.
+ Note that Lua\SpecialChar TeX
+ is only supported as of fontspec version 2.0 (2010/07/11).
\end_layout
\begin_layout Subsection
\family sans
Latin Modern
\family default
- fonts are PostScript versions of LaTeX's standard font (
+ fonts are PostScript versions of \SpecialChar LaTeX
+'s standard font (
\emph on
Computer Modern
\emph default
\family default
package provides access to three popular roman fonts and extends them with
matching math fonts.
- If you select one of the following roman fonts in LyX via
+ If you select one of the following roman fonts in \SpecialChar LyX
+ via
\family sans
\size normal
-Layout\SpecialChar \menuseparator
-Document\SpecialChar \menuseparator
+Layout\SpecialChar menuseparator
+Document\SpecialChar menuseparator
Fonts
\family default
\size default
\end_layout
\begin_layout Standard
-If you only want the text fonts and retain LaTeX's default math font, select
+If you only want the text fonts and retain \SpecialChar LaTeX
+'s default math font, select
a non-mathdesign variant of the respective font instead or select
\emph on
Class Default
\emph default
in
\family sans
-Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
-Fonts\SpecialChar \menuseparator
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Fonts\SpecialChar menuseparator
Math
\family default
.
\family sans
psnfss
\family default
- bundle allows you to change the fonts used by LyX to some of the 35 classical
+ bundle allows you to change the fonts used by \SpecialChar LyX
+ to some of the 35 classical
fonts available on PostScript printers.
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_deeper
\family default
provide different font packages.
Some packages are declared obsolete and were replaced by newer ones.
- Even if LyX supports the deprecated packages as well, we strongly recommend
+ Even if \SpecialChar LyX
+ supports the deprecated packages as well, we strongly recommend
that you take care to have the newest ones installed (which are then preferred
- by LyX).
+ by \SpecialChar LyX
+).
A recent
\family sans
psnfss
\begin_layout Standard
Note that some of these fonts automatically select a matching math font.
- If you only want the text fonts and retain LaTeX's default math font, select
+ If you only want the text fonts and retain \SpecialChar LaTeX
+'s default math font, select
\emph on
Class Default
\emph default
in
\family sans
-Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
-Fonts\SpecialChar \menuseparator
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Fonts\SpecialChar menuseparator
Math
\family default
.
\end_deeper
\begin_layout Subsection
-The TeX Gyre collection of fonts
+The \SpecialChar TeX
+ Gyre collection of fonts
\end_layout
\begin_layout Description
psnfss
\family default
fonts.
- The fonts have specifically been designed for the use with LaTeX.
- The following fonts are currently available and natively supported by LyX:
+ The fonts have specifically been designed for the use with \SpecialChar LaTeX
+.
+ The following fonts are currently available and natively supported by \SpecialChar LyX
+:
\end_layout
\begin_layout Itemize
\family default
(
\emph on
-TeX Gyre Adventor
+\SpecialChar TeX
+ Gyre Adventor
\emph default
): A sans serif font based on
\emph on
\family default
(
\emph on
-TeX Gyre Bonum
+\SpecialChar TeX
+ Gyre Bonum
\emph default
): A roman font based on
\emph on
\family default
(
\emph on
-TeX Gyre Chorus
+\SpecialChar TeX
+ Gyre Chorus
\emph default
): A roman (script) font based on
\emph on
\family default
(
\emph on
-TeX Gyre Cursor
+\SpecialChar TeX
+ Gyre Cursor
\emph default
): A monospaced font based on
\emph on
\family default
(
\emph on
-TeX Gyre Heros
+\SpecialChar TeX
+ Gyre Heros
\emph default
): A sans serif font based on
\emph on
\family default
(
\emph on
-TeX Gyre Pagella
+\SpecialChar TeX
+ Gyre Pagella
\emph default
): A roman font based on
\emph on
\family default
(
\emph on
-TeX Gyre Schola
+\SpecialChar TeX
+ Gyre Schola
\emph default
): A roman font based on
\emph on
\family default
(
\emph on
-TeX Gyre Termes
+\SpecialChar TeX
+ Gyre Termes
\emph default
): A roman font based on
\emph on
(IPA).
The input of these symbols is provided via
\family sans
-Insert\SpecialChar \menuseparator
-Special Character\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
+Special Character\SpecialChar menuseparator
Phonetic Symbols
\family default
-, by LyX's math editor and via the
+, by \SpecialChar LyX
+'s math editor and via the
\family sans
-Insert\SpecialChar \menuseparator
-Special Character\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
+Special Character\SpecialChar menuseparator
Symbols
\family default
dialog.
Times Roman
\emph default
with math support.
- In LyX, only the monospaced shape (
+ In \SpecialChar LyX
+, only the monospaced shape (
\emph on
TXTT
\emph default
sans serif face designed by Hermann Zapf.
The fonts are available for non-commercial use under the Aladdin Free Public
License.
- Under TeX Live the font needs to be installed via the 'getnonfreefonts-sys'
+ Under \SpecialChar TeX
+ Live the font needs to be installed via the 'getnonfreefonts-sys'
utility.
\end_layout
package provides access to the URW Garamond fonts.
These fonts are available for non-commercial use under the Aladdin Free
Public License.
- Under TeX Live the fonts needs to be installed, separately from the package
+ Under \SpecialChar TeX
+ Live the fonts needs to be installed, separately from the package
itself, via the 'getnonfreefonts-sys' utility (installed:
\begin_inset Info
type "package"
\end_layout
\begin_layout Section
-Standard LaTeX document classes
+Standard \SpecialChar LaTeX
+ document classes
\end_layout
\begin_layout Standard
The document classes presented in this section are the basic document classes
- provided by LaTeX.
- In particular, they are all present on your system as long as LaTeX2e is
- installed.
+ provided by \SpecialChar LaTeX
+.
+ In particular, they are all present on your system as long as \SpecialChar LaTeX2e
+ is installed.
When the text indicates that a particular class has not been found, this
means the layout file supporting this particular class has not been found.
\end_layout
article
\family default
is used to type articles or short texts.
- It is the basic LaTeX document class.
+ It is the basic \SpecialChar LaTeX
+ document class.
\end_layout
\begin_layout Subsection
slides
\family default
is intended to produce transparencies.
- It is not very well supported by LyX.
+ It is not very well supported by \SpecialChar LyX
+.
It is advised to use
\family sans
foils
article
\family default
.
- It is part of the AMS-LaTeX package and is used for typesetting of mathematics
+ It is part of the AMS-\SpecialChar LaTeX
+ package and is used for typesetting of mathematics
with a look the American Mathematical Society has developed.
They recommend it for the preparation of manuscripts intended for publication
both in the Society's books and journals, and also in other mathematical
literature.
- The Society requests that published documents prepared with AMS-LaTeX include
+ The Society requests that published documents prepared with AMS-\SpecialChar LaTeX
+ include
an acknowledgment of its use.
- LyX support is still limited.
+ \SpecialChar LyX
+ support is still limited.
\end_layout
\begin_layout Section
Additional document classes
\end_layout
+\begin_layout Subsection
+
+\change_inserted -712698321 1404301980
+a0poster
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404301976
+Found:
+\begin_inset Info
+type "textclass"
+arg "a0poster"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404302030
+CTAN:
+\family typewriter
+/macros/latex/contrib/a0poster
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404302077
+Notes: The document class
+\family sans
+a0poster
+\family default
+ provides support for conference posters on large paper.
+\end_layout
+
\begin_layout Subsection
aa
\end_layout
.
Please read carefully
\family typewriter
-AEA-LaTeX-AuthorGuide.pdf
+AEA-\SpecialChar LaTeX
+-AuthorGuide.pdf
\family default
and Information for Authors on the web
\begin_inset Flex URL
Journal of Geophysical Research
\emph default
, published by the American Geophysical Union.
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_deeper
\end_layout
\begin_layout Description
-Notes: A LaTeX class for producing presentations and slides.
+Notes: A \SpecialChar LaTeX
+ class for producing presentations and slides.
+\change_inserted -712698321 1404302092
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1404302096
+beamerposter
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404302093
+Found:
+\begin_inset Info
+type "textclass"
+arg "beamerposter"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404302107
+CTAN:
+\family typewriter
+/macros/latex/contrib/beamerposter
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404302191
+Notes: The document class
+\family sans
+beamerposter
+\family default
+ provides support for conference posters on large paper, thereby using the
+ boxes and design features provided by the
+\family sans
+beamer
+\family default
+ presentation class.
+\change_unchanged
+
\end_layout
\begin_layout Subsection
\family typewriter
tex/
\family default
- subdirectory of LyX source distribution)
+ subdirectory of \SpecialChar LyX
+ source distribution)
\end_layout
\begin_layout Description
broadway
\family default
is for writing plays.
- It is not an existing LaTeX document class, but a new one which is distributed
- with LyX.
+ It is not an existing \SpecialChar LaTeX
+ document class, but a new one which is distributed
+ with \SpecialChar LyX
+.
\end_layout
\begin_layout Subsection
\family sans
docbook
\family default
- is not a LaTeX document class.
+ is not a \SpecialChar LaTeX
+ document class.
It is designed to produce Docbook SGML documents, which, in turn, can be
exported as HTML, RTF, text, or dvi (through
\family typewriter
\family sans
dtk
\family default
- can be used to write articles for the Journal of the German TeX User Group
+ can be used to write articles for the Journal of the German \SpecialChar TeX
+ User Group
\begin_inset Quotes eld
\end_inset
-Die TeXnische Komödie
+Die \SpecialChar TeX
+nische Komödie
\begin_inset Quotes erd
\end_inset
europecv
\family default
document class is intended to provide curriculum vitaes (resumes) according
- to the official guidelines of the european community (europass).
- It therefore supports the european language self-assessment.
+ to the official guidelines of the
+\change_deleted -712698321 1426498553
+e
+\change_inserted -712698321 1426498553
+E
+\change_unchanged
+uropean community (
+\change_deleted -712698321 1426499033
+e
+\change_inserted -712698321 1426499033
+E
+\change_unchanged
+uropass).
+ It therefore supports the
+\change_deleted -712698321 1426498556
+e
+\change_inserted -712698321 1426499063
+E
+\change_unchanged
+uropean language self-assessment.
An example curriculum vitae created using this document class can be found
in the examples.
+
+\change_inserted -712698321 1426499129
+ This class follows the 2002 version of the guidelines (see
+\family sans
+europasscv
+\family default
+ for an implementation of the 2013 version).
+
+\change_unchanged
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1426498490
+europasscv
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1426498486
+Found:
+\begin_inset Info
+type "textclass"
+arg "europasscv"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1426498670
+CTAN:
+\family typewriter
+macros/latex/contrib/europasscv
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1426499137
+Notes: The
+\family sans
+europasscv
+\family default
+ document class is another unofficial \SpecialChar LaTeX
+ implementation of the Europass CV,
+ the standard model for curriculum vitae as recommended by the European
+ Commission.
+ As opposed to the
+\family sans
+europecv
+\family default
+ document class, it includes the major style updates that came out in 2013,
+ featuring a neater, more compact and somewhat fancier layout.
+\change_unchanged
+
\end_layout
\begin_layout Subsection
\family sans
book
\family default
-, \SpecialChar \ldots{}
+, \SpecialChar ldots
) with additional document-wide font sizes.
\end_layout
\family sans
foils
\family default
- (aka FoilTeX) provides an alternative to the standard
+ (aka Foil\SpecialChar TeX
+) provides an alternative to the standard
\family sans
slides
\family default
\family sans
seminar
\family default
- class, which is not currently supported by LyX.
+ class, which is not currently supported by \SpecialChar LyX
+.
Note that, due to its somewhat restrictive license, it is not included
- in free TeX distributions like teTeX.
+ in free \SpecialChar TeX
+ distributions like te\SpecialChar TeX
+.
\end_layout
\begin_layout Subsection
g-brief
\family default
.
- A template document using this document class is shipped with LyX.
+ A template document using this document class is shipped with \SpecialChar LyX
+.
\end_layout
\begin_layout Subsection
\family typewriter
tex/
\family default
- subdirectory of LyX source distribution)
+ subdirectory of \SpecialChar LyX
+ source distribution)
\end_layout
\begin_layout Description
\family default
can be used to type spec scripts for the U.S.
film industry.
- It is not an existing LaTeX document class, but a new one which is distributed
- with LyX.
+ It is not an existing \SpecialChar LaTeX
+ document class, but a new one which is distributed
+ with \SpecialChar LyX
+.
\end_layout
\begin_layout Subsection
\family sans
.cls
\family default
- file for use with LyX as the
+ file for use with \SpecialChar LyX
+ as the
\family sans
.sty
\family default
- file is for LaTeX 2.09 only.
+ file is for \SpecialChar LaTeX
+ 2.09 only.
Also note that if your
\family sans
ieeetran.cls
\family default
- is in lowercase like this example LyX will not find it and you should upgrade
+ is in lowercase like this example \SpecialChar LyX
+ will not find it and you should upgrade
to a newer version which has IEEE in capitals.
\end_layout
\end_layout
\begin_layout Description
-Notes: These document classes provide different versions of the base LaTeX
- document classes
+Notes: These document classes provide different versions of the base \SpecialChar LaTeX
+ document
+ classes
\family sans
article
\family default
\end_layout
\begin_layout Description
-Notes: These document classes provide different versions of the base LaTeX
- document classes
+Notes: These document classes provide different versions of the base \SpecialChar LaTeX
+ document
+ classes
\family sans
article
\family default
\end_layout
\begin_layout Description
-Notes: These document classes provide different versions of the base LaTeX
- document classes
+Notes: These document classes provide different versions of the base \SpecialChar LaTeX
+ document
+ classes
\family sans
article
\family default
\end_inset
).
- LyX provides layouts for both the old (now unsupported)
+ \SpecialChar LyX
+ provides layouts for both the old (now unsupported)
\family sans
scrlettr
\family default
\family sans
latex8
\family default
- is actually a LaTeX style file that adds some extra features to the
+ is actually a \SpecialChar LaTeX
+ style file that adds some extra features to the
\family sans
article
\family default
document class.
It produces documents suitable for submission to IEEE Conferences.
- The LaTeX files (including BibTeX style file) are distributed with the
- Author Kit for IEEE sponsored conferences.
+ The \SpecialChar LaTeX
+ files (including Bib\SpecialChar TeX
+ style file) are distributed with the Author Kit
+ for IEEE sponsored conferences.
\end_layout
\begin_layout Subsection
\family sans
linuxdoc
\family default
- is not a LaTeX document class.
+ is not a \SpecialChar LaTeX
+ document class.
It is designed to produce LinuxDoc-SGML documents, which, in turn, can
be exported as HTML, RTF, text or...
- LaTeX.
+ \SpecialChar LaTeX
+.
You need to have the
\family sans
sgml-tools
\end_inset
.
- LaTeX documents are available from Springer's ftp site on the following
- URL:
+ \SpecialChar LaTeX
+ documents are available from Springer's ftp site on the following URL:
\begin_inset Newline newline
\end_inset
.
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_deeper
\begin_layout Standard
-The LyX layout file for this document class is still insufficiently tested.
+The \SpecialChar LyX
+ layout file for this document class is still insufficiently tested.
\end_layout
\end_deeper
\end_layout
\begin_layout Description
-Notes: These document classes provide different versions of the base LaTeX
- document classes
+Notes: These document classes provide different versions of the base \SpecialChar LaTeX
+ document
+ classes
\family sans
article
\family default
\end_layout
\begin_layout Description
-Notes: A LaTeX class for producing presentations and slides.
+Notes: A \SpecialChar LaTeX
+ class for producing presentations and slides.
+\change_inserted -712698321 1404302204
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1404302208
+sciposter
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404302205
+Found:
+\begin_inset Info
+type "textclass"
+arg "sciposter"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404302219
+CTAN:
+\family typewriter
+/macros/latex/contrib/sciposter
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404302251
+Notes: The document class
+\family sans
+sciposter
+\family default
+ provides support for conference posters on of ISO A3 size and larger.
+\change_unchanged
+
\end_layout
\begin_layout Subsection
\family sans
spie.cls
\family default
- is a LaTeX class for submissions to the Proceedings of SPIE--The International
+ is a \SpecialChar LaTeX
+ class for submissions to the Proceedings of SPIE–The International
Society for Optical Engineering.More info on submitting a manuscript can
be found at the SPIE website under
\begin_inset Flex URL
\end_layout
\begin_layout Subsection
-REVTeX
+REV\SpecialChar TeX
+
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notes: This class, which used the REVTeX 3 class, has been superseded by
- the
+Notes: This class, which used the REV\SpecialChar TeX
+ 3 class, has been superseded by the
+
\family sans
revtex4
\family default
\family typewriter
tex/
\family default
- subdirectory of LyX source distribution.
+ subdirectory of \SpecialChar LyX
+ source distribution.
\end_layout
\begin_layout Subsection
-REVTeX 4
+REV\SpecialChar TeX
+ 4
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notes: REVTeX 4 is a class used for submitting manuscripts to journals including
+Notes: REV\SpecialChar TeX
+ 4 is a class used for submitting manuscripts to journals including
APS (Physical Review A-E and Letters, Reviews in Modern Physics, Special
- Topics---Accelerators and Beams), the American Institute of Physics, the
+ Topics—Accelerators and Beams), the American Institute of Physics, the
Optical Society of America, and the Society for Exploration Geophysicists.
Also see
\begin_inset Flex URL
\end_layout
\begin_layout Subsection
-SIAMLTeX
+SIAML\SpecialChar TeX
+
\end_layout
\begin_layout Description
\begin_layout Description
Notes: The Society for Industrial and Applied Mathematics, Philadelphia,
Pennsylvania, wants to ensure quality typesetting according to SIAM style
- standards by providing this LaTeX style.
+ standards by providing this \SpecialChar LaTeX
+ style.
\end_layout
\begin_layout Subsection
\family sans
cv
\family default
- class that has been available with LyX for a long time.
+ class that has been available with \SpecialChar LyX
+ for a long time.
The change of name has been made necessary by the existence of another
\family sans
\family sans
ltugboat
\family default
- can be used to write articles for the Journal of the TeX User Group
+ can be used to write articles for the Journal of the \SpecialChar TeX
+ User Group
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- by the LaTeX maintainers.
- You should really consider upgrading your LaTeX setup if one of them is
- not detected.
+ by the \SpecialChar LaTeX
+ maintainers.
+ You should really consider upgrading your \SpecialChar LaTeX
+ setup if one of them is not
+ detected.
\end_layout
\begin_layout Subsection
\family sans
amstext
\family default
- is needed by LyX to correctly size unicode symbols used as super or subscripts
+ is needed by \SpecialChar LyX
+ to correctly size unicode symbols used as super or subscripts
in math.
\end_layout
\family sans
array
\family default
- is needed by LyX to be able to output vertical alignment other then ''top''
+ is needed by \SpecialChar LyX
+ to be able to output vertical alignment other then ''top''
for tabulars.
\end_layout
allows you to customize your document for your favorite language (see the
\family sans
-Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
Language
\family default
popup).
.
This package is not needed if you only plan to write in English, except
if you want to use non-English quotes.
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_deeper
\begin_layout Standard
-Your LaTeX installation has hyphenation patterns for the following languages:
+Your \SpecialChar LaTeX
+ installation has hyphenation patterns for the following languages:
\begin_inset Info
type "package"
\end_layout
\begin_layout Standard
-If a language you use is not on this list, you should reconfigure your LaTeX
+If a language you use is not on this list, you should reconfigure your \SpecialChar LaTeX
+
installation to include it.
- For teTeX, this means running
+ For te\SpecialChar TeX
+, this means running
\family typewriter
texconfig
\family default
\family sans
booktabs
\family default
- is needed by LyX to be able to output correctly formal tables.
+ is needed by \SpecialChar LyX
+ to be able to output correctly formal tables.
\end_layout
\begin_layout Subsection
\family sans
calc
\family default
- is needed by LyX to process lengths and counters.
+ is needed by \SpecialChar LyX
+ to process lengths and counters.
\end_layout
\begin_layout Subsection
\family sans
color
\family default
- is needed by LyX to handle colored text.
+ is needed by \SpecialChar LyX
+ to handle colored text.
These colors will not show in the DVI preview window, but will be correct
on the printed output or with a PostScript previewer.
This package is bundled with the
\family sans
float
\family default
- is needed by LyX to create non-standard floating objects.
+ is needed by \SpecialChar LyX
+ to create non-standard floating objects.
Also, it provides the
\begin_inset Quotes eld
\end_inset
\family sans
graphicx
\family default
- is needed by LyX to insert PostScript figures (using the new graphics inset).
+ is needed by \SpecialChar LyX
+ to insert PostScript figures (using the new graphics inset).
You will also need
\family typewriter
\size normal
\family sans
hyperref
\family default
- is needed by LyX to be able to set PDF properties for your document and
- to create hyperlinks.
+ is needed by \SpecialChar LyX
+ to be able to set PDF properties for your document and to
+ create hyperlinks.
\end_layout
\begin_layout Subsection
\family sans
longtable
\family default
- is needed by LyX to be able to output correctly multipage tables.
+ is needed by \SpecialChar LyX
+ to be able to output correctly multipage tables.
\end_layout
\begin_layout Subsection
\family sans
textcomp
\family default
- is needed by LyX to output some special symbols like the EURO currency
- sign.
- The package is part of the LaTeX base distribution and should already be
- installed on your system.
+ is needed by \SpecialChar LyX
+ to output some special symbols like the EURO currency sign.
+ The package is part of the \SpecialChar LaTeX
+ base distribution and should already be installed
+ on your system.
\end_layout
\begin_layout Subsection
\begin_layout Standard
Changing the margins of a document is one thing people like to do.
- While LaTeX offers built-in options to set the margins of the documents,
- some people feel that these margins are too large and want to set them
- up differently.
+ While \SpecialChar LaTeX
+ offers built-in options to set the margins of the documents, some
+ people feel that these margins are too large and want to set them up differentl
+y.
You can use the package
\family sans
geometry
Chicago Manual of Style
\emph default
.
- It can be used with basic LaTeX or together with
+ It can be used with basic \SpecialChar LaTeX
+ or together with
\family sans
natbib
\family default
\family default
provides citation styles closely following the recommendations of the American
Psychological Association.
- It can be used with basic LaTeX or together with
+ It can be used with basic \SpecialChar LaTeX
+ or together with
\family sans
natbib
\family default
\family default
provides a citation style loosely following the recommendations of the
American Psychological Association.
- It can be used with basic LaTeX or with
+ It can be used with basic \SpecialChar LaTeX
+ or with
\family sans
natbib
\family default
\family default
provides citation styles following the guidelines of the journal Astronomy
and Astrophysics.
- It can be used with basic LaTeX or with
+ It can be used with basic \SpecialChar LaTeX
+ or with
\family sans
natbib
\family default
Chicago Manual of Style
\emph default
.
- It can be used with basic LaTeX or with
+ It can be used with basic \SpecialChar LaTeX
+ or with
\family sans
natbib
\family default
\family sans
bibtopic
\family default
- is used to split BibTeX created bibliographies into sections.
+ is used to split Bib\SpecialChar TeX
+ created bibliographies into sections.
\end_layout
\begin_layout Subsection
Chicago Manual of Style
\emph default
.
- It can be used with basic LaTeX or with
+ It can be used with basic \SpecialChar LaTeX
+ or with
\family sans
natbib
\family default
Publications
\emph default
.
- It can be used with basic LaTeX or with
+ It can be used with basic \SpecialChar LaTeX
+ or with
\family sans
natbib
\family default
\family sans
natbib
\family default
-, to get flexible bibliographic styles with LyX.
+, to get flexible bibliographic styles with \SpecialChar LyX
+.
It supports cite styles which are common in human sciences and law studies,
footcites, ibidems, and more.
You'll need to have jurabib version 0.6 at least.
\family default
provides a citation style approximately following the recommendations of
the American Psychological Association.
- It can be used with basic LaTeX or with
+ It can be used with basic \SpecialChar LaTeX
+ or with
\family sans
natbib
\family default
named
\family default
provides an author-year citation style following undocumented guidelines.
- It can be used with basic LaTeX or with
+ It can be used with basic \SpecialChar LaTeX
+ or with
\family sans
natbib
\family default
\family sans
natbib
\family default
- is needed by LyX to produce a flexible interface to most of the available
+ is needed by \SpecialChar LyX
+ to produce a flexible interface to most of the available
bibliographic styles (you can also use
\family sans
jurabib
braille
\family default
makes it possible to typeset Braille, a character system for blind people.
+\change_inserted -712698321 1409487964
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1409487969
+FIXME module
+\end_layout
+
+\begin_layout Subsubsection
+
+\change_inserted -712698321 1409487975
+fixme
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1409487965
+Found:
+\begin_inset Info
+type "package"
+arg "fixme"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1409487990
+CTAN:
+\family typewriter
+macros/latex/contrib/fixme/
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1409488012
+Notes: The package
+\family sans
+fixme
+\family default
+\color none
+ is used to insert
+\begin_inset Quotes eld
+\end_inset
+
+FIXME
+\begin_inset Quotes erd
+\end_inset
+
+ notes into documents.
+\change_unchanged
+
\end_layout
\begin_layout Subsection
itemize, description).
It is used by the Linguistics module to fine tune the appearance of numbered
subexamples.
+\change_inserted 155139281 1429547340
+
+\end_layout
+
+\begin_layout Subsubsection
+
+\change_inserted 155139281 1429547345
+forest
+\end_layout
+
+\begin_layout Description
+
+\change_inserted 155139281 1429547341
+Found:
+\begin_inset Info
+type "package"
+arg "forest"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted 155139281 1429547356
+CTAN:
+\family typewriter
+macros/latex/contrib/forest/
+\end_layout
+
+\begin_layout Description
+
+\change_inserted 155139281 1429547385
+Notes: The package
+\family sans
+forest
+\family default
+ provides support for generating linguistic structure trees.
+\change_inserted -712698321 1426533959
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1426533969
+Multilingual Captions module
+\end_layout
+
+\begin_layout Subsubsection
+
+\change_inserted -712698321 1426533976
+bicaption
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1426533959
+Found:
+\begin_inset Info
+type "package"
+arg "bicaption"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1426533992
+CTAN:
+\family typewriter
+macros/latex/contrib/caption/
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1426534118
+Notes: The package
+\family sans
+bicaption
+\family default
+ enables pairs of captions (in different languages), with control of other
+ options similar to that provided by the caption package.
+ Languages to be used are selected using
+\family sans
+babel
+\family default
+.
+ This package is part of the
+\family sans
+caption
+\family default
+ bundle.
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1404379473
+PDF Comments module
+\end_layout
+
+\begin_layout Subsubsection
+
+\change_inserted -712698321 1404379477
+pdfcomment
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404379467
+Found:
+\begin_inset Info
+type "package"
+arg "pdfcomment"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404379548
+CTAN:
+\family typewriter
+macros/latex/contrib/pdfcomment/
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1404379579
+Notes: The package
+\family sans
+pdfcomment
+\family default
+\color none
+ is used to insert annotations into PDF documents via pdflatex.
+\change_unchanged
+
\end_layout
\begin_layout Subsection
sectionbox
\family default
\color none
- is a LaTeX package for putting fancy colored boxes around sections, subsections
-, and subsubsections, especially for use in posters, etc.
+ is a \SpecialChar LaTeX
+ package for putting fancy colored boxes around sections, subsections,
+ and subsubsections, especially for use in posters, etc.
It was designed with the
\family sans
\color inherit
\begin_layout Description
-\change_inserted -712698321 1404300960
+\change_inserted -712698321 1409489193
Notes: The package
\family sans
tcolorbox
\family default
\color none
is used to produce fancy boxes.
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1409489213
+TODO Notes module
+\end_layout
+
+\begin_layout Subsubsection
+
+\change_inserted -712698321 1409489210
+todonotes
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1409489194
+Found:
+\begin_inset Info
+type "package"
+arg "todonotes"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1409489226
+CTAN:
+\family typewriter
+macros/latex/contrib/todonotes/
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -712698321 1409489236
+Notes: The package
+\family sans
+todonotes
+\family default
+\color none
+ is used to insert
+\begin_inset Quotes eld
+\end_inset
+
+TODO
+\begin_inset Quotes erd
+\end_inset
+
+ notes into documents.
\change_unchanged
\end_layout
\family sans
arabi
\family default
- is needed by LyX to output documents in the languages Arabic or Farsi.
+ is needed by \SpecialChar LyX
+ to output documents in the languages Arabic or Farsi.
\end_layout
\begin_layout Subsection
\family sans
bidi
\family default
- is needed by LyX to output documents in languages written right-to-left
- such as Arabic, Divehi, Farsi, Hebrew, Syriac or Urdu.
+ is needed by \SpecialChar LyX
+ to output documents in languages written right-to-left such
+ as Arabic, Divehi, Farsi, Hebrew, Syriac or Urdu.
\end_layout
\begin_layout Subsection
\family sans
japanese
\family default
- is needed by LyX to be able to output section headings and dates in Japanese
+ is needed by \SpecialChar LyX
+ to be able to output section headings and dates in Japanese
when the document language is
\begin_inset Quotes eld
\end_inset
\end_inset
.
- To use this option, the Japanese TeX system pTeX (CTAN:
+ To use this option, the Japanese \SpecialChar TeX
+ system p\SpecialChar TeX
+ (CTAN:
\family typewriter
language/japanese/ptex/
\family default
\family sans
lithuanian
\family default
- is needed by LyX to be able to output documents with the document language
+ is needed by \SpecialChar LyX
+ to be able to output documents with the document language
Lithuanian.
\end_layout
\family sans
mongolian-babel
\family default
- is needed by LyX to be able to output documents with the document language
+ is needed by \SpecialChar LyX
+ to be able to output documents with the document language
Mongolian.
\end_layout
\family sans
polyglossia
\family default
- provides a language interface specifically for XeTeX.
+ provides a language interface specifically for Xe\SpecialChar TeX
+.
It aims to supersede the
\family sans
babel
\family default
- package by using XeTeX's mutlilingual and multiscript facilities.
+ package by using Xe\SpecialChar TeX
+'s mutlilingual and multiscript facilities.
If installed,
\family sans
polyglossia
\family sans
babel
\family default
- when XeTeX is used as output format.
+ when Xe\SpecialChar TeX
+ is used as output format.
\end_layout
\begin_layout Subsection
\family sans
turkmen
\family default
- is needed by LyX to be able to output documents with the document language
+ is needed by \SpecialChar LyX
+ to be able to output documents with the document language
Turkmen.
\end_layout
\family sans
accents
\family default
- is needed by LyX to correctly typeset unicode symbols with under accents
- in math.
+ is needed by \SpecialChar LyX
+ to correctly typeset unicode symbols with under accents in
+ math.
\end_layout
\begin_layout Subsection
\family sans
algorithm
\family default
- is needed by LyX to be able to output
+ is needed by \SpecialChar LyX
+ to be able to output
\begin_inset Quotes eld
\end_inset
in
\family sans
-Document\SpecialChar \menuseparator
-Settings\SpecialChar \ldots{}
-\SpecialChar \menuseparator
+Document\SpecialChar menuseparator
+Settings\SpecialChar ldots
+\SpecialChar menuseparator
Modules
\family default
.
\family sans
bibtopic
\family default
- is used to split BibTeX created bibliographies into sections.
+ is used to split Bib\SpecialChar TeX
+ created bibliographies into sections.
\end_layout
\begin_layout Subsection
\family sans
CJK
\family default
- bundle) merges base LaTeX's and CJK's UTF-8 support.
+ bundle) merges base \SpecialChar LaTeX
+'s and CJK's UTF-8 support.
It is needed to produce proper output with the combination of CJK, utf-8
encoding, and hyperref.
\end_layout
\family sans
dvipost
\family default
- is a post-processor for DVI files created by LaTeX and TeX.
- It is needed by LyX to generate DVI or Postscript output of change tracking
+ is a post-processor for DVI files created by \SpecialChar LaTeX
+ and \SpecialChar TeX
+.
+ It is needed by \SpecialChar LyX
+ to generate DVI or Postscript output of change tracking
marks.
To work properly,
\family sans
dvipost
\family default
- needs teTeX version 2 or newer.
+ needs te\SpecialChar TeX
+ version 2 or newer.
\end_layout
\begin_layout Subsection
\family sans
fancybox
\family default
- is needed to draw frames around boxes (menu Insert\SpecialChar \menuseparator
+ is needed to draw frames around boxes (menu Insert\SpecialChar menuseparator
Box).
\end_layout
\family sans
fixltx2e
\family default
- fixes some bugs in the LaTeX kernel.
+ fixes some bugs in the \SpecialChar LaTeX
+ kernel.
It can be used by including the
\family sans
fixltx2e
\family default
module.
+\change_inserted -195340706 1415992274
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -195340706 1415992274
+footmisc
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -195340706 1415992274
+Found:
+\begin_inset Info
+type "package"
+arg "footmisc"
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -195340706 1415992274
+CTAN:
+\family typewriter
+macros/latex/contrib/supported/footmisc/footmisc.sty
+\end_layout
+
+\begin_layout Description
+
+\change_inserted -195340706 1415992274
+Notes: The package
+\family sans
+footmisc
+\family default
+is needed to support stable footnotes in chapter titles.
+\change_unchanged
+
\end_layout
\begin_layout Subsection
\emph on
\color inherit
-\SpecialChar \ldots{}
- then \SpecialChar \ldots{}
+\SpecialChar ldots
+ then \SpecialChar ldots
else
\emph default
\color none
-) for LaTeX documents.
+) for \SpecialChar LaTeX
+ documents.
This functionality is needed by some classes and modules.
\end_layout
\family sans
natbib
\family default
-, to get flexible bibliographic styles with LyX.
+, to get flexible bibliographic styles with \SpecialChar LyX
+.
It supports cite styles which are common in human sciences and law studies,
footcites, ibidems, and more.
You'll need to have jurabib version 0.6 at least.
listings
\family default
\color none
- is used by LyX to display program listings (source code snippets).
+ is used by \SpecialChar LyX
+ to display program listings (source code snippets).
It supports many program languages, syntax highlighting, line numbers,
etc.
\end_layout
luainputenc
\family default
\color none
- reimplements input encoding features for LuaTeX.
- It is needed if LuaTeX is used as output format with tex fonts.
+ reimplements input encoding features for Lua\SpecialChar TeX
+.
+ It is needed if Lua\SpecialChar TeX
+ is used as output format with tex fonts.
\end_layout
\begin_layout Subsection
\family sans
mathrsfs
\family default
- is used by LyX to output the math font style
+ is used by \SpecialChar LyX
+ to output the math font style
\begin_inset Quotes eld
\end_inset
\family sans
mathdots
\family default
- is used by LyX to parse the math command
+ is used by \SpecialChar LyX
+ to parse the math command
\family sans
\backslash
\family sans
mathtools
\family default
- is used by LyX for some unicode symbols.
+ is used by \SpecialChar LyX
+ for some unicode symbols.
\end_layout
\begin_layout Subsection
\family sans
mhchem
\family default
- is needed by LyX to produce chemical formulas and reaction equations in
- math.
+ is needed by \SpecialChar LyX
+ to produce chemical formulas and reaction equations in math.
\end_layout
\begin_layout Subsection
\family sans
multirow
\family default
- is needed by LyX to merge table cells over several rows, as well as supporting
+ is needed by \SpecialChar LyX
+ to merge table cells over several rows, as well as supporting
the spreadsheet external inset.
\end_layout
\family sans
natbib
\family default
- is needed by LyX to produce a flexible interface to most of the available
+ is needed by \SpecialChar LyX
+ to produce a flexible interface to most of the available
bibliographic styles (you can also use
\family sans
jurabib
\family sans
nicefrac
\family default
- is needed by LyX to create fractions in text size (like
+ is needed by \SpecialChar LyX
+ to create fractions in text size (like
\begin_inset Quotes eld
\end_inset
\family sans
nomencl
\family default
- is needed by LyX to produce a nomenclature.
+ is needed by \SpecialChar LyX
+ to produce a nomenclature.
\end_layout
\begin_layout Subsection
\family sans
pdfpages
\family default
- is used by LyX to include multi-page PDF files via
+ is used by \SpecialChar LyX
+ to include multi-page PDF files via
\family sans
-Insert\SpecialChar \menuseparator
-File\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
+File\SpecialChar menuseparator
External Material
\family default
.
prettyref
\family default
provides a command to identify reference labels by a prefix.
- LyX uses labels in the form
+ \SpecialChar LyX
+ uses labels in the form
\begin_inset Quotes eld
\end_inset
\family sans
preview
\family default
- is needed by LyX to preview LaTeX constructs; especially for math formulas
- when you use the option ``Instant Preview'' in Tools->Preferences->Look
- and feel->Graphics.
+ is needed by \SpecialChar LyX
+ to preview \SpecialChar LaTeX
+ constructs; especially for math formulas when
+ you use the option ``Instant Preview'' in Tools->Preferences->Look and
+ feel->Graphics.
\end_layout
\begin_layout Subsection
\family sans
rotating
\family default
- is needed by LyX to change the orientation of some parts of your documents.
+ is needed by \SpecialChar LyX
+ to change the orientation of some parts of your documents.
Note that it only really works with a PostScript compatible printer.
\end_layout
\family sans
rotfloat
\family default
- is needed by LyX to rotate floats sideways.
+ is needed by \SpecialChar LyX
+ to rotate floats sideways.
Note that it only really works with a PostScript compatible printer.
\end_layout
\family sans
slashed
\family default
- is needed by LyX to correctly typeset unicode symbols with slashes in math.
+ is needed by \SpecialChar LyX
+ to correctly typeset unicode symbols with slashes in math.
\end_layout
\begin_layout Subsection
\family sans
splitidx
\family default
- is needed by LyX to generate multiple and subdivided indices.
+ is needed by \SpecialChar LyX
+ to generate multiple and subdivided indices.
Note that you also need to install one of the included
\family sans
splitindex
\family sans
stackrel
\family default
- is needed by LyX to be able to output formulas using the
+ is needed by \SpecialChar LyX
+ to be able to output formulas using the
\backslash
stackrel command with subscript.
\end_layout
\family sans
stmaryrd
\family default
- is needed by LyX to be able to output additional characters that come from
+ is needed by \SpecialChar LyX
+ to be able to output additional characters that come from
the St Mary's Road symbol font.
\end_layout
\family sans
subfig
\family default
- is used by LyX to produce subfloats (i.
+ is used by \SpecialChar LyX
+ to produce subfloats (i.
\begin_inset space \thinspace{}
\end_inset
\family sans
subscript
\family default
- is needed by LyX to output subscript text with some document classes.
- In TeX distributions it is usually part of the
+ is needed by \SpecialChar LyX
+ to output subscript text with some document classes.
+ In \SpecialChar TeX
+ distributions it is usually part of the
\family sans
fragments
\family default
\family sans
setspace
\family default
- is needed by LyX to change the line spacing of your document.
+ is needed by \SpecialChar LyX
+ to change the line spacing of your document.
\end_layout
\begin_layout Subsection
\family default
provides various types of underlining, striking through and emphasizing
that can stretch between words and be broken across lines.
- It is needed by LyX to output struck out text in change tracked documents
+ It is needed by \SpecialChar LyX
+ to output struck out text in change tracked documents
to PDF.
\end_layout
utilde
\family default
command.
- It is needed by LyX to underline symbols with a tilde in formulas.
+ It is needed by \SpecialChar LyX
+ to underline symbols with a tilde in formulas.
\end_layout
\begin_layout Subsection
\family sans
units
\family default
- is needed by LyX to properly typeset units in formulas.
+ is needed by \SpecialChar LyX
+ to properly typeset units in formulas.
\end_layout
\begin_layout Subsection
\family sans
url
\family default
- is needed by LyX to be able to output urls correctly.
+ is needed by \SpecialChar LyX
+ to be able to output urls correctly.
\end_layout
\begin_layout Subsection
\family sans
wasysym
\family default
- is needed by LyX to be able to output additional characters that come from
+ is needed by \SpecialChar LyX
+ to be able to output additional characters that come from
the wasy fonts.
\end_layout
\family sans
wrapfig
\family default
- is used by LyX if you insert text wrap floats (menu
+ is used by \SpecialChar LyX
+ if you insert text wrap floats (menu
\family sans
-Insert\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
Float)
\family default
.
\family sans
xargs
\family default
- is used by LyX if you insert math macros with optional arguments.
+ is used by \SpecialChar LyX
+ if you insert math macros with optional arguments.
\end_layout
\begin_layout Subsection
\family sans
xcolor
\family default
- provides advanced color features that are not covered by LaTeX's standard
-
+ provides advanced color features that are not covered by \SpecialChar LaTeX
+'s standard
\family sans
color
\family default
package.
- LyX uses it to output colored change tracking marks.
+ \SpecialChar LyX
+ uses it to output colored change tracking marks.
\end_layout
\end_body
projects / lyx.git / blobdiff