#LyX 2.4 created this file. For more info see https://www.lyx.org/
-\lyxformat 609
+\lyxformat 614
\begin_document
\begin_header
\save_transient_properties true
\font_default_family default
\use_non_tex_fonts false
\font_sc false
-\font_roman_osf false
\font_sans_osf false
\font_typewriter_osf false
+\font_roman_osf false
\font_sf_scale 100 100
\font_tt_scale 100 100
-\use_microtype false
-\use_dash_ligatures true
+\use_microtype 0
\graphics default
\default_output_format default
\output_sync 0
\is_math_indent 0
\math_numbering_side default
\quotes_style english
-\dynamic_quotes 0
\papercolumns 1
\papersides 1
\paperpagestyle default
-\tablestyle default
\tracking_changes false
-\output_changes false
-\change_bars false
\postpone_fragile_content false
+\output_changes false
\html_math_output 0
\html_css_as_file 0
\html_be_strict false
-\docbook_table_output 0
-\docbook_mathml_prefix 1
\end_header
\begin_body
These are commands that are used to make \SpecialChar LyX
perform specific actions.
\SpecialChar LyX
- itself uses these functions internally, and every internal action is bound
- to an LFUN.
+ itself uses these functions internally, and every internal action is
+ bound to an LFUN.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Description
-Params outer: If this is given, LyX will split the outermost environment
- in the current nesting hierarchy.
+Params outer: If this is given, LyX will split the outermost environment in the current nesting hierarchy.
\begin_inset Newline newline
\end_inset
-previous: If this is given, LyX will split the environment in the previous
- paragraph (if there is one).
+previous: If this is given, LyX will split the environment in the previous paragraph (if there is one).
\begin_inset Newline newline
\end_inset
-before: If this is given, the new environment will be appended rather
- than prepended.
+before: If this is given, the new environment will be appended rather than prepended.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Reloads all layout information for the current buffer from disk,
- thus recognizing any changes that have been made to layout files on the
- fly.
- This is intended to be used only by layout developers and should not be
- used when one is trying to do actual work.
+Notion Reloads all layout information for the current buffer from disk, thus recognizing any changes that have been made to layout files on the fly. This is intended to be used only by layout developers and should not be used when one is trying to do actual work.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Contrary to `layout', this function resets the current (or selection)
- layout to the standard layout it already has the correct layout.
- Useful for toolbar icons.
+Notion Contrary to `layout', this function resets the current (or selection) layout to the standard layout it already has the correct layout. Useful for toolbar icons.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TEXTCLASS>: the textclass to set.
- Note that this must be the filename, minus the ".layout" extension.
+Params <TEXTCLASS>: the textclass to set. Note that this must be the filename, minus the ".layout" extension.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Params <TEXTCLASS>: the textclass to load.
- Note that this must be the filename, minus the ".layout" extension.
+Params <TEXTCLASS>: the textclass to load. Note that this must be the filename, minus the ".layout" extension.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Notion These properties are stored via LFUN_TEXTSTYLE_UPDATE, which is automatic
-ally triggered when using Text Style dialog.
+Notion These properties are stored via LFUN_TEXTSTYLE_UPDATE, which is automatically triggered when using Text Style dialog.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <NUM>: number of the selection in the internal freefonts stack to
- be applied.
+Params <NUM>: number of the selection in the internal freefonts stack to be applied.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Apply text style and update the settings to be used by LFUN_TEXTSTYLE_APP
-LY.
+Action Apply text style and update the settings to be used by LFUN_TEXTSTYLE_APPLY.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FONT_INFO>: specifies font attributes, e.g.
- family, series, shape, size, emph, noun, underbar, number, color, language,
- toggleall.
+Params <FONT_INFO>: specifies font attributes, e.g. family, series, shape, size, emph, noun, underbar, number, color, language, toggleall.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Notion Reject does not work recursively; the user may have to repeat the
- operation.
+Notion Reject does not work recursively; the user may have to repeat the operation.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Databases are added to the first BibTeX inset (Inset->List/TOC->BibTeX
- bibliography) found from the cursor position.
+Notion Databases are added to the first BibTeX inset (Inset->List/TOC->BibTeX bibliography) found from the cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Databases are deleted from the first BibTeX inset (Inset->List/TOC->BibTe
-X bibliography) found from the cursor position.
+Notion Databases are deleted from the first BibTeX inset (Inset->List/TOC->BibTeX bibliography) found from the cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor to the numbered bookmark, opening the file if necessary.
- Note that bookmarks are saved per-session, not per file.
+Action Moves the cursor to the numbered bookmark, opening the file if necessary. Note that bookmarks are saved per-session, not per file.
\end_layout
\begin_layout Description
-Notion Bookmark 0 has a special purpose.
- It is automatically set
+Notion Bookmark 0 has a special purpose. It is automatically set
\begin_inset Newline newline
\end_inset
-1.
- to the paragraph you are currently editing
+1. to the paragraph you are currently editing
\begin_inset Newline newline
\end_inset
-2.
- to the paragraph from where you are jumping to the last-edited position
- (jump-back feature)
+2. to the paragraph from where you are jumping to the last-edited position (jump-back feature)
\begin_inset Newline newline
\end_inset
-3.
- when jumping from crossreference to the requested label by LFUN_LABEL_GOTO.
+3. when jumping from crossreference to the requested label by LFUN_LABEL_GOTO.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Saves a numbered bookmark to the sessions file.
- The number must be between 1 and 9, inclusive.
- Note that bookmarks are saved per-session, not per file.
+Notion Saves a numbered bookmark to the sessions file. The number must be between 1 and 9, inclusive. Note that bookmarks are saved per-session, not per file.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action For debug purposes only.
- Convert all [a-zA-Z0-1] characters to single character.
- Useful when submitting docs to list or bugzilla.
+Action For debug purposes only. Convert all [a-zA-Z0-1] characters to single character. Useful when submitting docs to list or bugzilla.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the beginning of the document adding the traversed
- text to the selection.
+Action Move the cursor to the beginning of the document adding the traversed text to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the end of the document adding the traversed text
- to the selection.
+Action Move the cursor to the end of the document adding the traversed text to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Splits cell and shifts right part to the next cell (inside the math
- grid).
+Action Splits cell and shifts right part to the next cell (inside the math grid).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor to the position of the next change of the change
- tracking records.
+Action Moves the cursor to the position of the next change of the change tracking records.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor to the position of the previous change of the change
- tracking records.
+Action Moves the cursor to the position of the previous change of the change tracking records.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Open change tracking dialog for merging and moves the cursor to the
- position of the next change.
+Action Open change tracking dialog for merging and moves the cursor to the position of the next change.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion This is not the action which should be bound to the arrow keys, because
- backwards may be left or right, depending on the language.
- The arrow keys should be bound to LFUN_CHAR_LEFT or LFUN_CHAR_RIGHT actions,
- which in turn may employ this one.
+Notion This is not the action which should be bound to the arrow keys, because backwards may be left or right, depending on the language. The arrow keys should be bound to LFUN_CHAR_LEFT or LFUN_CHAR_RIGHT actions, which in turn may employ this one.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor one position logically backwards, adding traversed
- position to the selection.
+Action Moves the cursor one position logically backwards, adding traversed position to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Deletes one character in the backward direction (usually the "BackSpace"
- key).
+Action Deletes one character in the backward direction (usually the "BackSpace" key).
\end_layout
\begin_layout Description
-Syntax char-delete-backward [force]
+Syntax char-delete-backward [confirm]
\end_layout
\begin_layout Description
-Params force: Delete big insets, do not only select them.
+Params confirm: Select big insets, do not directly delete them.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Action Deletes one character in the backward direction (usually the "Delete"
- key).
+Action Deletes one character in the backward direction (usually the "Delete" key).
\end_layout
\begin_layout Description
-Syntax char-delete-forward [force]
+Syntax char-delete-forward [confirm]
\end_layout
\begin_layout Description
-Params force: Delete big insets, do not only select them.
+Params confirm: Select big insets, do not directly delete them.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Notion This is not the action which should be bound to the arrow keys, because
- forward may be left or right, depending on the language.
- The arrow keys should be bound to LFUN_CHAR_LEFT or LFUN_CHAR_RIGHT actions,
- which in turn may employ this one.
+Notion This is not the action which should be bound to the arrow keys, because forward may be left or right, depending on the language. The arrow keys should be bound to LFUN_CHAR_LEFT or LFUN_CHAR_RIGHT actions, which in turn may employ this one.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor one position logically forward, adding traversed
- position to the selection.
+Action Moves the cursor one position logically forward, adding traversed position to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion This is the action which should be taken when the "left" key is pressed.
- Generally, it moves the cursor one position to the left.
- However, in Bidi text this become slightly more complicated, and there
- are different modes of cursor movement.
- In "visual mode", this moves left, plain and simple.
- In "logical mode", movement is logically forward in RTL paragraphs, and
- logically backwards in LTR paragraphs.
+Notion This is the action which should be taken when the "left" key is pressed. Generally, it moves the cursor one position to the left. However, in Bidi text this become slightly more complicated, and there are different modes of cursor movement. In "visual mode", this moves left, plain and simple. In "logical mode", movement is logically forward in RTL paragraphs, and logically backwards in LTR paragraphs.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor one position "to the left", adding traversed position
- to the selection.
+Action Moves the cursor one position "to the left", adding traversed position to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion This is the action which should be taken when the "right" key is
- pressed.
- Generally, it moves the cursor one position to the right.
- However, in Bidi text this become slightly more complicated, and there
- are different modes of cursor movement.
- In "visual mode", this moves right, plain and simple.
- In "logical mode", movement is logically forward in LTR paragraphs, and
- logically backwards in RTL paragraphs.
+Notion This is the action which should be taken when the "right" key is pressed. Generally, it moves the cursor one position to the right. However, in Bidi text this become slightly more complicated, and there are different modes of cursor movement. In "visual mode", this moves right, plain and simple. In "logical mode", movement is logically forward in LTR paragraphs, and logically backwards in RTL paragraphs.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor one position "to the right", adding traversed position
- to the selection.
+Action Moves the cursor one position "to the right", adding traversed position to the selection.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
- and launching viewer.
- In this case TARGET consists of author and year
+ and launching viewer. In this case TARGET consists of author and year
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Pastes text from the active clipboard (retains formatting if the
- clipboard contains formatted text).
- Pastes plain text if plain text is on the clipboard, but tries to interpret
- it in special ways for certain insets, e.g.
- converting csv data to rows and columns if the paste happens in a tabular
- inset.
+Action Pastes text from the active clipboard (retains formatting if the clipboard contains formatted text). Pastes plain text if plain text is on the clipboard, but tries to interpret it in special ways for certain insets, e.g. converting csv data to rows and columns if the paste happens in a tabular inset.
\end_layout
\begin_layout Description
-Notion Historically, LFUN_CLIPBOARD_PASTE was introduced as a counterpart
- of LFUN_PRIMARY_SELECTION_PASTE: It behaved exactly the same, but the source
- is the clipboard, not the selection.
+Notion Historically, LFUN_CLIPBOARD_PASTE was introduced as a counterpart of LFUN_PRIMARY_SELECTION_PASTE: It behaved exactly the same, but the source is the clipboard, not the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ARG>: "paragraph" will cause pasting as one paragraph, i.e.
- "Join lines".
+Params <ARG>: "paragraph" will cause pasting as one paragraph, i.e. "Join lines".
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Pastes plain text from the active clipboard even if formatted LyX
- content is in the clipboard.
- Pastes plain text if plain text is on the clipboard, without trying to
- interpret it in special ways for certain insets, e.g.
- converting csv data to rows and columns if the paste happens in a tabular
- inset.
+Action Pastes plain text from the active clipboard even if formatted LyX content is in the clipboard. Pastes plain text if plain text is on the clipboard, without trying to interpret it in special ways for certain insets, e.g. converting csv data to rows and columns if the paste happens in a tabular inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ARG>: "paragraph" will cause pasting as one paragraph, i.e.
- "Join lines".
+Params <ARG>: "paragraph" will cause pasting as one paragraph, i.e. "Join lines".
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Action Switches the focus to the minibuffer so that the user can type in
- there.
- If necessary, it opens the minibuffer toolbar.
+Action Switches the focus to the minibuffer so that the user can type in there. If necessary, it opens the minibuffer toolbar.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Decrease the nesting depth of the (selected) paragraph(s) inside
- lists.
+Action Decrease the nesting depth of the (selected) paragraph(s) inside lists.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Increase the nesting depth of the (selected) paragraph(s) inside
- lists.
+Action Increase the nesting depth of the (selected) paragraph(s) inside lists.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Hides showed dialog.
- Counterpart to LFUN_DIALOG_SHOW .
+Action Hides showed dialog. Counterpart to LFUN_DIALOG_SHOW .
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Shows hidden dialog or creates new one for a given function/inset
- settings etc.
+Action Shows hidden dialog or creates new one for a given function/inset settings etc.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-compare|counter|document|errorlist|ert|external|file|findreplace|findreplaceadv|
-float|
+compare|counter|document|errorlist|ert|external|file|findreplace|findreplaceadv|float|
\begin_inset Newline newline
\end_inset
-graphics|href|include|index|index_print|info|label|line|listings|log|mathdelimit
-er|
+graphics|href|include|index|index_print|info|label|line|listings|log|mathdelimiter|
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-<DATA>: data, usually settings for the given dialog.
- Use debug mode for the details.
+<DATA>: data, usually settings for the given dialog. Use debug mode for the details.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Shows hidden dialog or create new one for a given inset settings
- etc.
+Action Shows hidden dialog or create new one for a given inset settings etc.
\end_layout
\begin_layout Description
-Notion Internally uses LFUN_DIALOG_SHOW with processed data for a given
- inset.
+Notion Internally uses LFUN_DIALOG_SHOW with processed data for a given inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor one line in downward direction adding the current
- position to the selection.
+Action Moves the cursor one line in downward direction adding the current position to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Clears the selection.
- If no text is selected call LFUN_FINISHED_FORWARD.
- Inside math mode jumps out of the math inset.
+Action Clears the selection. If no text is selected call LFUN_FINISHED_FORWARD. Inside math mode jumps out of the math inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FILE>: Filename to be inserted.
- ignorelang: If given, the (main) language of the inserted file is ignored
- (the context language is used).
+Params <FILE>: Filename to be inserted. ignorelang: If given, the (main) language of the inserted file is ignored (the context language is used).
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Action Inserts plain text file as paragraph (i.e.
- join lines).
+Action Inserts plain text file as paragraph (i.e. join lines).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Look into the Customization manual for more information about these
- elements.
+Notion Look into the Customization manual for more information about these elements.
\begin_inset Newline newline
\end_inset
-To make this command enabled the layout file for the document class you're
- using has to load the character styles.
- There are a few contained in the Logical Markup module.
- You can also of course create some yourself.
+To make this command enabled the layout file for the document class you're using has to load the character styles. There are a few contained in the Logical Markup module. You can also of course create some yourself.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Params Name: This name must be defined either in your layout file or imported
- by some module.
- The definition is InsetLayout Name or InsetLayout <Flex:Name>.
- The Flex: prefix is optional.
+Params Name: This name must be defined either in your layout file or imported by some module. The definition is InsetLayout Name or InsetLayout <Flex:Name>. The Flex: prefix is optional.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TYPE>: type of float depends on the used textclass.
- Usually "algorithm", "table", "figure" parameters can be given.
+Params <TYPE>: type of float depends on the used textclass. Usually "algorithm", "table", "figure" parameters can be given.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TYPE>: type of float depends on the used textclass.
- Usually "algorithm", "table", "figure" parameters can be given.
+Params <TYPE>: type of float depends on the used textclass. Usually "algorithm", "table", "figure" parameters can be given.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TYPE>: type of float depends on the used textclass.
- Usually "algorithm", "table", "figure" parameters can be given.
+Params <TYPE>: type of float depends on the used textclass. Usually "algorithm", "table", "figure" parameters can be given.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <GROUP>: Id for an existing group.
- In case the Id is an empty string, the graphics inset is removed from the
- current group.
+Params <GROUP>: Id for an existing group. In case the Id is an empty string, the graphics inset is removed from the current group.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <GROUP>: Id for an existing group.
- In case the Id is an empty string, the group Id from the first graphics
- inset will be used.
+Params <GROUP>: Id for an existing group. In case the Id is an empty string, the group Id from the first graphics inset will be used.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Dummy function which is only active in a IPA inset.
- It's used to toggle the IPA toolbar if the cursor moves into an IPA inset.
+Notion Dummy function which is only active in a IPA inset. It's used to toggle the IPA toolbar if the cursor moves into an IPA inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TYPE:Name>: name of the index, if multiple indices are defined.
- With an empty argument, the default index is selected.
+Params <TYPE:Name>: name of the index, if multiple indices are defined. With an empty argument, the default index is selected.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TYPE:Name>: name of the index, if multiple indices are defined.
- With an empty argument, the default index is selected.
+Params <TYPE:Name>: name of the index, if multiple indices are defined. With an empty argument, the default index is selected.
\end_layout
\begin_layout Description
Origin Lgb, 27 Feb 1997
\end_layout
+\begin_layout Subsection*
+index-tag-all
+\end_layout
+
+\begin_layout Description
+Action Tags all occurrences of the word before the cursor with the index inset at cursor.
+\end_layout
+
+\begin_layout Description
+Notion It automatically takes the word on the cursor position.
+\end_layout
+
+\begin_layout Description
+Syntax index-tag-all
+\end_layout
+
+\begin_layout Description
+Origin spitz, 5 Nov 2022
+\end_layout
+
+\begin_layout Subsection*
+indexmacro-insert
+\end_layout
+
+\begin_layout Description
+Action Inserts special Index macros into the document.
+\end_layout
+
+\begin_layout Description
+Syntax indexmacro-insert <type>
+\end_layout
+
+\begin_layout Description
+Params <type>: see, seealso, subentry, sortkey.
+\end_layout
+
+\begin_layout Description
+Origin spitz, 20 Feb 2022
+\end_layout
+
\begin_layout Subsection*
info-insert
\end_layout
\begin_layout Description
-Action Displays shortcuts, lyxrc, package and textclass availability and
- menu information in a non-editable boxed InsetText.
+Action Displays shortcuts, lyxrc, package and textclass availability and menu information in a non-editable boxed InsetText.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-1.
- input the type and argument of this inset, e.g.
- "menu paste", in the work area.
+1. input the type and argument of this inset, e.g. "menu paste", in the work area.
\begin_inset Newline newline
\end_inset
-2.
- select the text and run info-insert lfun.
+2. select the text and run info-insert lfun.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TYPE>: date|moddate|fixdate|time|modtime|fixtime|shortcut|shortcuts|lyxr
-c| lyxinfo|package|textclass|menu|l7n|icon|buffer|vcs
+Params <TYPE>: date|moddate|fixdate|time|modtime|fixtime|shortcut|shortcuts|lyxrc| lyxinfo|package|textclass|menu|l7n|icon|buffer|vcs
\begin_inset Newline newline
\end_inset
-<ARG>: argument for a given type.
- Look into InsetInfo.h for detailed description.
+<ARG>: argument for a given type. Look into InsetInfo.h for detailed description.
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-lyxrc: name of rc_entry (e.g.
- bind_file)
+lyxrc: name of rc_entry (e.g. bind_file)
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-package: name of latex package (e.g.
- listings)
+package: name of latex package (e.g. listings)
\begin_inset Newline newline
\end_inset
-textclass: name of textclass (e.g.
- article)
+textclass: name of textclass (e.g. article)
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-buffer: "name"|"name-noext"|"path"|"class" vcs: "tree-revision"|"revision"|"auth
-or"|"date"|"time"
+buffer: "name"|"name-noext"|"path"|"class" vcs: "tree-revision"|"revision"|"author"|"date"|"time"
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion LFUN_INSET_APPLY is sent from the dialogs when the data should be
- applied.
- This is either changed to LFUN_INSET_MODIFY or LFUN_INSET_INSERT depending
- on the context where it is called.
+Notion LFUN_INSET_APPLY is sent from the dialogs when the data should be applied. This is either changed to LFUN_INSET_MODIFY or LFUN_INSET_INSERT depending on the context where it is called.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the beginning of the current inset if it is not
- already there.
- If the cursor is already at the beginning of the current inset, move it
- to the beginning of the enclosing inset or the main work area, respectively,
- if there is no enclosing inset.
+Action Move the cursor to the beginning of the current inset if it is not already there. If the cursor is already at the beginning of the current inset, move it to the beginning of the enclosing inset or the main work area, respectively, if there is no enclosing inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the beginning of the current inset if it is not
- already there.
- If the cursor is already at the beginning of the current inset, move it
- to the beginning of the enclosing inset or the main work area, respectively,
- if there is no enclosing inset (adding the traversed text to the selection).
+Action Move the cursor to the beginning of the current inset if it is not already there. If the cursor is already at the beginning of the current inset, move it to the beginning of the enclosing inset or the main work area, respectively, if there is no enclosing inset (adding the traversed text to the selection).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Currently used only for InsetInfo where its content is copied as
- a text.
+Notion Currently used only for InsetInfo where its content is copied as a text.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <INSET>: this can be used to make sure the right kind of inset is
- dissolved.
- For example "dissolve" entry in the charstyles sub-menu should only dissolve
- the charstyle inset, even if the cursor is inside several nested insets
- of different type.
+Params <INSET>: this can be used to make sure the right kind of inset is dissolved. For example "dissolve" entry in the charstyles sub-menu should only dissolve the charstyle inset, even if the cursor is inside several nested insets of different type.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Edit the inset at cursor with an external application, if one is
- attributed.
- If the inset is file based, the referenced file is edited.
- Otherwise, the inset contents is written to a temporary file, the inset
- is locked, and the temporary file is edited.
- In this case, LFUN_INSET_END_EDIT must be called to overtake the changes
- and unlock the inset after editing is finished.
+Action Edit the inset at cursor with an external application, if one is attributed. If the inset is file based, the referenced file is edited. Otherwise, the inset contents is written to a temporary file, the inset is locked, and the temporary file is edited. In this case, LFUN_INSET_END_EDIT must be called to overtake the changes and unlock the inset after editing is finished.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the end of the current inset if it is not already
- there.
- If the cursor is already at the end of the current inset, move it to the
- end of the enclosing inset or the main work area, respectively, if there
- is no enclosing inset.
+Action Move the cursor to the end of the current inset if it is not already there. If the cursor is already at the end of the current inset, move it to the end of the enclosing inset or the main work area, respectively, if there is no enclosing inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action End editing the inset at cursor with an external application.
- This replaces the inset contents with the contents of the temporary file,
- deletes the file and unlocks the inset.
+Action End editing the inset at cursor with an external application. This replaces the inset contents with the contents of the temporary file, deletes the file and unlocks the inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the end of the current inset if it is not already
- there.
- If the cursor is already at the end of the current inset, move it to the
- end of the enclosing inset or the main work area, respectively, if there
- is no enclosing inset (adding the traversed text to the selection).
+Action Move the cursor to the end of the current inset if it is not already there. If the cursor is already at the end of the current inset, move it to the end of the enclosing inset or the main work area, respectively, if there is no enclosing inset (adding the traversed text to the selection).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion WARNING: use at your own risks; this function gives you too many
- ways of shooting yourself in the foot.
- A typical example is inset-forall Note note-insert which starts an infinite
- loop.
- This is mitigated by the fact that the number of actions is arbitrarily
- limited to 100000.
- Note also that inset-forall does not update metrics between iterations,
- which can lead to bugs.
- This has to be eventually fixed.
+Notion WARNING: use at your own risks; this function gives you too many ways of shooting yourself in the foot. A typical example is inset-forall Note note-insert which starts an infinite loop. This is mitigated by the fact that the number of actions is arbitrarily limited to 100000. Note also that inset-forall does not update metrics between iterations, which can lead to bugs. This has to be eventually fixed.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-<NAME>: Type of Inset.
- If <NAME> is *, all insets are matched.
- The name is used like for InsetLayout in layout files: "Note" matches all
- note insets, while "Note:Note" only matches LyX yellow note insets.
+<NAME>: Type of Inset. If <NAME> is *, all insets are matched. The name is used like for InsetLayout in layout files: "Note" matches all note insets, while "Note:Note" only matches LyX yellow note insets.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-inset-forall Index char-delete-forward force
+inset-forall Index char-delete-forward
\begin_inset Newline newline
\end_inset
-Close all Notes (also works for a particular branch, for example):
+Close all Notes:
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
+Open all branch insets of branch "myBranch":
+\begin_inset Newline newline
+\end_inset
+
+inset-forall Branch:myBranch inset-toggle open
+\begin_inset Newline newline
+\end_inset
+
Transform all yellow notes to comments
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-<ARGS>: depends on the given inset.
- Use "lyx -dbg action" to explore.
+<ARGS>: depends on the given inset. Use "lyx -dbg action" to explore.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-where <label name> is the name of the referenced label and <Format> is one
- of the following:
+where <label name> is the name of the referenced label and <Format> is one of the following:
\begin_inset Newline newline
\end_inset
formatted -- Formatted reference
\end_layout
+\begin_layout Subsection*
+inset-insert-copy
+\end_layout
+
+\begin_layout Description
+Action Inserts the inset's content (in ToC pane) at the position of the cursor.
+\end_layout
+
+\begin_layout Description
+Syntax inset-insert-copy
+\end_layout
+
+\begin_layout Description
+Origin spitz, 1 Nov 2022
+\end_layout
+
\begin_layout Subsection*
inset-modify
\end_layout
\end_layout
\begin_layout Description
-Notion Used for argument, bibitem, bibtex, box, branch, caption, citation,
- command, ert, external, float, graphics, include, index, info, label, line,
- listings, newline, newpage, nomencl, note, phantom, quotes, ref, script,
- separator, space, tabular, vspace and wrap insets.
+Notion Used for argument, bibitem, bibtex, box, branch, caption, citation, command, ert, external, float, graphics, include, index, info, label, line, listings, newline, newpage, nomencl, note, phantom, quotes, ref, script, separator, space, tabular, vspace and wrap insets.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-Change a quotation mark to e[nglish style], l[eft side = opening], s[ingle
- = inner, secondary]
+Change a quotation mark to e[nglish style], l[eft side = opening], s[ingle = inner, secondary]
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-Change only the style of a quotation mark, maintaining the other aspects
- (.
- = wildcard)
+Change only the style of a quotation mark, maintaining the other aspects (. = wildcard)
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Notion There are 3 successive levels: select current cell, select all cells
- of inset, select the inset from outside (in the enclosing inset).
+Notion There are 3 successive levels: select current cell, select all cells of inset, select the inset from outside (in the enclosing inset).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Used for bibitem, bibtex, box, branch, citation, ert, external, float,
- graphics, href, include, index, index_print, label, line, listings, note,
- phantom, ref, space, tabular, vspace, wrap insets.
+Notion Used for bibitem, bibtex, box, branch, citation, ert, external, float, graphics, href, include, index, index_print, label, line, listings, note, phantom, ref, space, tabular, vspace, wrap insets.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <INSET>: this can be used to make sure the right kind of inset is
- dissolved.
- For example "split" entry in the charstyles sub-menu should only dissolve
- the charstyle inset, even if the cursor is inside several nested insets
- of different type.
+Params <INSET>: this can be used to make sure the right kind of inset is dissolved. For example "split" entry in the charstyles sub-menu should only dissolve the charstyle inset, even if the cursor is inside several nested insets of different type.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Toggles the collapsible inset at cursor position, or the inset we
- are currently in.
+Action Toggles the collapsible inset at cursor position, or the inset we are currently in.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-open/close/toggle are for collapsible insets.
- toggle is used when no argument is given.
+open/close/toggle are for collapsible insets. toggle is used when no argument is given.
\begin_inset Newline newline
\end_inset
-assign synchronize the branch-inset with activation status of the branch.
- Used for global toggling when changed activation.
+assign synchronize the branch-inset with activation status of the branch. Used for global toggling when changed activation.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <CHAR>: tone-falling, tone-rising, tone-high-rising, tone-low-rising,
- tone-high-rising-falling, deco bottomtiebar, deco toptiebar.
+Params <CHAR>: tone-falling, tone-rising, tone-high-rising, tone-low-rising, tone-high-rising-falling, deco bottomtiebar, deco toptiebar.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Maps were widely used in past, when X-windows didn't have nowadays
- keyboard support.
- They can be still used to maintain uniform keyboard layout across the various
- platforms.
+Notion Maps were widely used in past, when X-windows didn't have nowadays keyboard support. They can be still used to maintain uniform keyboard layout across the various platforms.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Copies the label at the cursor as a cross-reference to be pasted
- elsewhere.
+Action Copies the label at the cursor as a cross-reference to be pasted elsewhere.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <LABEL>: Requested label.
- If no label is given and reference is on cursor position, Bookmark 0 is
- saved and cursor moves to the position of referenced label.
+Params <LABEL>: Requested label. If no label is given and reference is on cursor position, Bookmark 0 is saved and cursor moves to the position of referenced label.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <LABEL>: Requested label.
- If no label is given dialog requesting name will be opened.
+Params <LABEL>: Requested label. If no label is given dialog requesting name will be opened.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Action Inserts the label (in ToC pane) as a cross-reference at the position
- of the cursor.
+Action Inserts the label (in ToC pane) as a cross-reference at the position of the cursor.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <LANG>: Requested language.
- Look in lib/languages for the list.
- "language reset" or "language" (without param) reset to the document language.
- set: If used, the language will be set to the specified language.
- Otherwise, the language will be toggled (i.e., if the current language is
- LANG, switch to the document language or the default language, if LANG
- is the document language).
+Params <LANG>: Requested language. Look in lib/languages for the list. "language reset" or "language" (without param) reset to the document language. set: If used, the language will be set to the specified language. Otherwise, the language will be toggled (i.e., if the current language is LANG, switch to the document language or the default language, if LANG is the document language).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the beginning of the (screen) line adding the
- traversed text to the selection.
+Action Move the cursor to the beginning of the (screen) line adding the traversed text to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Deletes the letters to the end of the (screen) line or deletes the
- selection.
+Action Deletes the letters to the end of the (screen) line or deletes the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the end of the (screen) line adding the traversed
- text to the selection.
+Action Move the cursor to the end of the (screen) line adding the traversed text to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion It automatically takes the word on the cursor position if no symbol
- is given.
+Notion It automatically takes the word on the cursor position if no symbol is given.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Inserts Note on the current cursor position, move selection inside
- the inset.
+Action Inserts Note on the current cursor position, move selection inside the inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the current group in the downward direction in the structure
- of the document.
+Action Move the current group in the downward direction in the structure of the document.
\end_layout
\begin_layout Description
-Notion The "group" can be Part/Chapter/Section/etc.
- It moves the whole substructure of the group.
+Notion The "group" can be Part/Chapter/Section/etc. It moves the whole substructure of the group.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the current group in the downward direction in the hierarchy
- of the document structure.
+Action Moves the current group in the downward direction in the hierarchy of the document structure.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the current group in the upward direction in the hierarchy
- of the document structure.
+Action Moves the current group in the upward direction in the hierarchy of the document structure.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the current group in the upward direction in the structure of
- the document.
+Action Move the current group in the upward direction in the structure of the document.
\end_layout
\begin_layout Description
-Notion The "group" can be Part/Chapter/Section/etc.
- It moves the whole substructure of the group.
+Notion The "group" can be Part/Chapter/Section/etc. It moves the whole substructure of the group.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <LAYOUT>: "inverse" - decreases depth by one (or change layout to
- default layout) when the cursor is at the end of the line.
+Params <LAYOUT>: "inverse" - decreases depth by one (or change layout to default layout) when the cursor is at the end of the line.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Move the cursor to the next paragraph (or beginning of the current
- one) in downward direction.
+Action Move the cursor to the next paragraph (or beginning of the current one) in downward direction.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor and select the text to the next paragraph (or beginning
- of the current one) in downward direction.
+Action Move the cursor and select the text to the next paragraph (or beginning of the current one) in downward direction.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Jump to a paragraph given by its id number and optionally the desired
- position within the paragraph.
- If given four arguments id_start, pos_start, id_end, pos_end, perform a
- selection from start to end.
+Action Jump to a paragraph given by its id number and optionally the desired position within the paragraph. If given four arguments id_start, pos_start, id_end, pos_end, perform a selection from start to end.
\end_layout
\begin_layout Description
-Notion Note that id number of paragraph is not the sequential number of
- paragraph seen on the screen.
- Moreover the id is unique for all opened buffers (documents).
- Both ids must belong to the same buffer.
+Notion Note that id number of paragraph is not the sequential number of paragraph seen on the screen. Moreover the id is unique for all opened buffers (documents). Both ids must belong to the same buffer.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Movement through the document will possibly break the paragraph-depth
- (e.g.
- itemize structure).
+Notion Movement through the document will possibly break the paragraph-depth (e.g. itemize structure).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Modifies the current paragraph, or currently selected paragraphs.
- This function only modifies, and does not override, existing settings.
- Note that the "leftindent" indent setting is deprecated.
+Notion Modifies the current paragraph, or currently selected paragraphs. This function only modifies, and does not override, existing settings. Note that the "leftindent" indent setting is deprecated.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Overwrite all nonspecified settings to the default ones.
- Use paragraph-params lfun if you don't want to overwrite others settings.
+Notion Overwrite all nonspecified settings to the default ones. Use paragraph-params lfun if you don't want to overwrite others settings.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move cursor to beginning of current paragraph and select to the end
- in downward direction
+Action Move cursor to beginning of current paragraph and select to the end in downward direction
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor to the next paragraph (or beginning of the current
- one) in upward direction.
+Action Move the cursor to the next paragraph (or beginning of the current one) in upward direction.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Move the cursor and select the text to the next paragraph (or beginning
- of the current one) in upward direction.
+Action Move the cursor and select the text to the next paragraph (or beginning of the current one) in upward direction.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Inserts phantom on the current cursor position, move selection inside
- the inset.
+Action Inserts phantom on the current cursor position, move selection inside the inset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Primary selection mechanism is linux-only thing.
+Notion Primary selection mechanism is X11/Wayland-only thing.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ARG>: "paragraph" will cause pasting as one paragraph, i.e.
- "Join lines".
+Params <ARG>: "paragraph" will cause pasting as one paragraph, i.e. "Join lines".
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Params <LEVEL>: 'inner' for (i.e., secondary, usually single) quotes, otherwise
- outer (i.e., primary, usually double) quotes will be used.
+Params <LEVEL>: 'inner' for (i.e., secondary, usually single) quotes, otherwise outer (i.e., primary, usually double) quotes will be used.
\begin_inset Newline newline
\end_inset
-<SIDE>: 'opening' for opening quotes, 'closing' for closing quotes, otherwise
- the side will be guessed from the context.
+<SIDE>: 'opening' for opening quotes, 'closing' for closing quotes, otherwise the side will be guessed from the context.
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-'frenchin' for <<frenchin>> quote style (with <<inner quotation>>) ["in"
- = Imprimerie Nationale]
+'frenchin' for <<frenchin>> quote style (with <<inner quotation>>) ["in" = Imprimerie Nationale]
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-'swedishg' for >>swedishg>> quote style (with 'inner quotation') ["g" =
- Guillemets]
+'swedishg' for >>swedishg>> quote style (with 'inner quotation') ["g" = Guillemets]
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-'dynamic' for Dynamic quotation marks which inherit the global document
- style
+'dynamic' for Dynamic quotation marks which inherit the global document style
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Moves the cursor one screen in downward direction adding the current
- position to the selection.
+Action Moves the cursor one screen in downward direction adding the current position to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor one page in upward direction adding the current
- position to the selection.
+Action Moves the cursor one page in upward direction adding the current position to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <DATA>: string to search for.
- If no parameter is given, use (word under) selection.
+Params <DATA>: string to search for. If no parameter is given, use (word under) selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Created in order to have middle mouse button pasting correct (bound
- to command-alternatives selection-paste ; primary-selection-paste paragraph).
+Notion Created in order to have middle mouse button pasting correct (bound to command-alternatives selection-paste ; primary-selection-paste paragraph).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <NAME>: normal, protected, visible, thin, quad, qquad, enspace, enskip,
- negthinspace, negmedspace, negthickspace, hfill, hfill*, dotfill, hrulefill,
- hspace, hspace*
+Params <NAME>: normal, protected, visible, thin, quad, qquad, enspace, enskip, negthinspace, negmedspace, negthickspace, hfill, hfill*, dotfill, hrulefill, hspace, hspace*
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Params <CHAR>: hyphenation, allowbreak, ligature-break, slash, nobreakdash,
- dots, end-of-sentence, menu-separator, lyx, tex, latex, latex2e.
+Params <CHAR>: hyphenation, allowbreak, ligature-break, slash, nobreakdash, dots, end-of-sentence, menu-separator, lyx, tex, latex, latex2e.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Add the word under the cursor to the respective spell checker dictionary.
- The default for the language is retrieved from the cursor position.
+Action Add the word under the cursor to the respective spell checker dictionary. The default for the language is retrieved from the cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Add the word under the cursor to the document's local spell checker
- dictionary.
- The default for the language is retrieved from the cursor position.
+Action Add the word under the cursor to the document's local spell checker dictionary. The default for the language is retrieved from the cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Let the spell checker ignore the word under the cursor in the current
- session for the given language.
- The default for the language is retrieved from the cursor position.
+Action Let the spell checker ignore the word under the cursor in the current session for the given language. The default for the language is retrieved from the cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Remove the word under the cursor from the respective spell checker
- dictionary.
- The default for the language is retrieved from the cursor position.
+Action Remove the word under the cursor from the respective spell checker dictionary. The default for the language is retrieved from the cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Remove the word under the cursor from the document's local spell
- checker dictionary.
- The default for the language is retrieved from the cursor position.
+Action Remove the word under the cursor from the document's local spell checker dictionary. The default for the language is retrieved from the cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Delete a tab or up to an equivalent amount of spaces from a listings
- inset.
+Action Delete a tab or up to an equivalent amount of spaces from a listings inset.
\end_layout
\begin_layout Description
-Notion It also works on a selection - it removes a tab or spaces from the
- beginning of each line spanned by the selection.
- This is useful if you want to indent/unindent multiple lines in one action.
+Notion It also works on a selection - it removes a tab or spaces from the beginning of each line spanned by the selection. This is useful if you want to indent/unindent multiple lines in one action.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-reset-formal-default|set-all-lines|unset-all-lines|toggle-longtabular|
+reset-formal-default|set-all-lines|toggle-all-lines|unset-all-lines|
\begin_inset Newline newline
\end_inset
-set-longtabular|unset-longtabular|set-pwidth|
+toggle-longtabular|set-longtabular|unset-longtabular|set-pwidth|
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-set-interline-space|set-border-lines|tabular-valign-top|
+set-interline-space|tabular-valign-top|tabular-valign-middle|
\begin_inset Newline newline
\end_inset
-tabular-valign-middle|tabular-valign-bottom|set-tabular-width|
+tabular-valign-bottom|set-tabular-width|toggle-varwidth-column|
\begin_inset Newline newline
\end_inset
-toggle-varwidth-column Various math-environment features are handled as
- well, e.g.
- add-vline-left/right for
+set-border-lines|toggle-border-lines|set-inner-lines|toggle-inner-lines Various math-environment features are handled as well, e.g. add-vline-left/right for
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-<ARG>: additional argument for some commands, use debug mode to explore
- its values.
+<ARG>: additional argument for some commands, use debug mode to explore its values.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion See LFUN_TABULAR_FEATURE for some more details about tabular modification
-s.
+Notion See LFUN_TABULAR_FEATURE for some more details about tabular modifications.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion See LFUN_TABULAR_FEATURE for some more details about tabular
- modifications.
+Notion See LFUN_TABULAR_FEATURE for some more details about tabular modifications.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params Valid styles are the names of the files in lib/tabletemplates, minus
- _1x<n> and .lyx suffix.
+Params Valid styles are the names of the files in lib/tabletemplates, minus _1x<n> and .lyx suffix.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor one line in upward direction adding the current
- position to the selection.
+Action Moves the cursor one line in upward direction adding the current position to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion This is not the action which should be bound to the arrow keys, because
- backwards may be left or right, depending on the language.
- The arrow keys should be bound to LFUN_WORD_LEFT or LFUN_WORD_RIGHT actions,
- which in turn may employ this one.
+Notion This is not the action which should be bound to the arrow keys, because backwards may be left or right, depending on the language. The arrow keys should be bound to LFUN_WORD_LEFT or LFUN_WORD_RIGHT actions, which in turn may employ this one.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor to the logically previous beginning of a word, adding
- the logically traversed text to the selection.
+Action Moves the cursor to the logically previous beginning of a word, adding the logically traversed text to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Capitalizes the words in the selection (i.e.
- the first letters) or the first letter of word at cursor position.
+Action Capitalizes the words in the selection (i.e. the first letters) or the first letter of word at cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <SEL_TYPE>: if this is equal to "partial", then the default word
- starts at cursor position (emacs-style).
- Otherwise, the whole word is considered.
+Params <SEL_TYPE>: if this is equal to "partial", then the default word starts at cursor position (emacs-style). Otherwise, the whole word is considered.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Action Deletes characters to the beginning of the word (usually the "C+BackSpace
-" key).
+Action Deletes characters to the beginning of the word (usually the "C+BackSpace" key).
\end_layout
\begin_layout Description
-Syntax word-delete-backward [force]
+Syntax word-delete-backward [confirm]
\end_layout
\begin_layout Description
-Params force: Delete big insets, do not only select them.
+Params confirm: Select big insets, do not directly delete them.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Action Deletes characters to the end of the word (usually the "C+Delete"
- key).
+Action Deletes characters to the end of the word (usually the "C+Delete" key).
\end_layout
\begin_layout Description
-Syntax word-delete-forward [force]
+Syntax word-delete-forward [confirm]
\end_layout
\begin_layout Description
-Params force: Delete big insets, do not only select them.
+Params confirm: Select big insets, do not directly delete them.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Params <DATA>: data encoded from Find dialog (see lyx::find2string()).
- If no parameter is given, search with last find-dialog data is used for
- search (i.e.
- find-next).
+Params <DATA>: data encoded from Find dialog (see lyx::find2string()). If no parameter is given, search with last find-dialog data is used for search (i.e. find-next).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Case sensitive, match words.
- If no argument given, last search repeated.
+Notion Case sensitive, match words. If no argument given, last search repeated.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Case sensitive, match words.
- If no argument given, last search repeated.
+Notion Case sensitive, match words. If no argument given, last search repeated.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <DATA>: data encoded from FindAdv dialog (see lyx::findadv2string()).
- If no parameter is given, search with last find-dialog data is used for
- search (i.e.
- find-next).
+Params <DATA>: data encoded from FindAdv dialog (see lyx::findadv2string()). If no parameter is given, search with last find-dialog data is used for search (i.e. find-next).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion This is not the action which should be bound to the arrow keys, because
- forward may be left or right, depending on the language.
- The arrow keys should be bound to LFUN_WORD_LEFT or LFUN_WORD_RIGHT actions,
- which in turn may employ this one.
+Notion This is not the action which should be bound to the arrow keys, because forward may be left or right, depending on the language. The arrow keys should be bound to LFUN_WORD_LEFT or LFUN_WORD_RIGHT actions, which in turn may employ this one.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor to the logically next beginning of a word, adding
- the logically traversed text to the selection.
+Action Moves the cursor to the logically next beginning of a word, adding the logically traversed text to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion This is the action which should be taken when the (e.g., ctrl-) "left"
- key is pressed.
- Generally, it moves the cursor to the next beginning of a word on the left.
- However, in Bidi text this become slightly more complicated, and there
- are different modes of cursor movement.
- In "visual mode", this moves left, plain and simple.
- In "logical mode", movement is logically forward in RTL paragraphs, and
- logically backwards in LTR paragraphs.
+Notion This is the action which should be taken when the (e.g., ctrl-) "left" key is pressed. Generally, it moves the cursor to the next beginning of a word on the left. However, in Bidi text this become slightly more complicated, and there are different modes of cursor movement. In "visual mode", this moves left, plain and simple. In "logical mode", movement is logically forward in RTL paragraphs, and logically backwards in LTR paragraphs.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor to the next beginning of a word "on the left", adding
- *logically* traversed text to the selection.
+Action Moves the cursor to the next beginning of a word "on the left", adding *logically* traversed text to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Change the words in the selection or word at cursor position to lower
- case.
+Action Change the words in the selection or word at cursor position to lower case.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <SEL_TYPE>: if this is equal to "partial", then the default word
- starts at cursor position (emacs-style).
- Otherwise, the whole word is considered.
+Params <SEL_TYPE>: if this is equal to "partial", then the default word starts at cursor position (emacs-style). Otherwise, the whole word is considered.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Notion This is the action which should be taken when the (e.g., ctrl-) "right"
- key is pressed.
- Generally, it moves the cursor to the next beginning of a word on the right.
- However, in Bidi text this become slightly more complicated, and there
- are different modes of cursor movement.
- In "visual mode", this moves right, plain and simple.
- In "logical mode", movement is logically forward in LTR paragraphs, and
- logically backwards in RTL paragraphs.
+Notion This is the action which should be taken when the (e.g., ctrl-) "right" key is pressed. Generally, it moves the cursor to the next beginning of a word on the right. However, in Bidi text this become slightly more complicated, and there are different modes of cursor movement. In "visual mode", this moves right, plain and simple. In "logical mode", movement is logically forward in LTR paragraphs, and logically backwards in RTL paragraphs.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Moves the cursor to the next beginning of a word "on the right",
- adding *logically* traversed text to the selection.
+Action Moves the cursor to the next beginning of a word "on the right", adding *logically* traversed text to the selection.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Change the words in the selection or word at cursor position to upper
- case.
+Action Change the words in the selection or word at cursor position to upper case.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <SEL_TYPE>: if this is equal to "partial", then the default word
- starts at cursor position (emacs-style).
- Otherwise, the whole word is considered.
+Params <SEL_TYPE>: if this is equal to "partial", then the default word starts at cursor position (emacs-style). Otherwise, the whole word is considered.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Notion Dummy function which is only active in a Math Macro definition.
- It's used to toggle the Math Macro toolbar if the cursor moves into a Math
- Macro definition.
+Notion Dummy function which is only active in a Math Macro definition. It's used to toggle the Math Macro toolbar if the cursor moves into a Math Macro definition.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <DECORATION>: Decoration determines the LaTeX name of the matrix
- that should be created.
- Possible values include pmatrix, bmatrix, Bmatrix, vmatrix, Vmatrix, smallmatri
-x, and matrix.
- The default is 'matrix'.
+Params <DECORATION>: Decoration determines the LaTeX name of the matrix that should be created. Possible values include pmatrix, bmatrix, Bmatrix, vmatrix, Vmatrix, smallmatrix, and matrix. The default is 'matrix'.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Inserts math fixed size delimiters (e.g.
- parentheses, brackets) enclosing expression.
+Action Inserts math fixed size delimiters (e.g. parentheses, brackets) enclosing expression.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-<L/RDELIM>: TeX code for delimiter.
- See Delimiter dialog for delimiters to be used.
+<L/RDELIM>: TeX code for delimiter. See Delimiter dialog for delimiters to be used.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Inserts math delimiters (e.g.
- parentheses, brackets) enclosing expression.
+Action Inserts math delimiters (e.g. parentheses, brackets) enclosing expression.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <LEFT/RIGHT>: Delimiters to be used.
- Each delimiter can be specified by either a LaTeX name or a valid character.
- ( is the default letter.
+Params <LEFT/RIGHT>: Delimiters to be used. Each delimiter can be specified by either a LaTeX name or a valid character. ( is the default letter.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Creates a new displayed equation in text mode.
- Toggles inlined/display formula in math mode.
+Action Creates a new displayed equation in text mode. Toggles inlined/display formula in math mode.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ARG>: this argument will be passed to LFUN_MATH_INSERT when creating
- new equation from the text mode.
+Params <ARG>: this argument will be passed to LFUN_MATH_INSERT when creating new equation from the text mode.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Calls external program and passes the current expression/equation
- as an argument for the calculation in the format appropriate to the given
- language.
+Action Calls external program and passes the current expression/equation as an argument for the calculation in the format appropriate to the given language.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-where "script" stands for the external script (normalized expression will
- be passed)
+where "script" stands for the external script (normalized expression will be passed)
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion When <ARG> is a _single_ math inset with more than one cell (such
- as "x_y^z" or "
+Notion When <ARG> is a _single_ math inset with more than one cell (such as "x_y^z" or "
\backslash
-frac{x}{y}"), the content of cell(0) is replaced by the current selection
- (only works if the selection is in mathed).
- As an example, if "abc" is selected in mathed, "math-insert
+frac{x}{y}"), the content of cell(0) is replaced by the current selection (only works if the selection is in mathed). As an example, if "abc" is selected in mathed, "math-insert
\backslash
frac{x}{y}" replaces "abc" with "
\backslash
-frac{abc}{y}", and "math-insert x_y^z" replaces "abc" with "abc_y^z".
- If nothing is selected (or the selection is not in mathed), math-insert
- works as expected.
+frac{abc}{y}", and "math-insert x_y^z" replaces "abc" with "abc_y^z". If nothing is selected (or the selection is not in mathed), math-insert works as expected.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Toggles the position of the limits from above/below to the right
- side an vice versa in integral symbol, a limit, a summation, etc.
+Action Toggles the position of the limits from above/below to the right side an vice versa in integral symbol, a limit, a summation, etc.
\end_layout
\begin_layout Description
-Notion Put the cursor before the symbol with the limits and then invoke
- math-limits.
+Notion Put the cursor before the symbol with the limits and then invoke math-limits.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <NAME>: The name of the macro, e.g.
- "mymacro".
+Params <NAME>: The name of the macro, e.g. "mymacro".
\begin_inset Newline newline
\end_inset
-<NARGS>: The number of parameters of the macro.
- Default is 0.
- "def": Has no effect anymore, just for compatibility with former LyX versions.
+<NARGS>: The number of parameters of the macro. Default is 0. "def": Has no effect anymore, just for compatibility with former LyX versions.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Add a greedy optional parameter which eats the value from the following
- cells in mathed which are in the [value] format.
+Notion Add a greedy optional parameter which eats the value from the following cells in mathed which are in the [value] format.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Insert an optional parameter just behind the already existing optional
- parameters.
+Notion Insert an optional parameter just behind the already existing optional parameters.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <NUM>: The number of the parameter behind which the new one will
- be added (1 for the first, i.e.
- use 0 for add a parameter at the left), defaults to the last one.
+Params <NUM>: The number of the parameter behind which the new one will be added (1 for the first, i.e. use 0 for add a parameter at the left), defaults to the last one.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Append a greedy parameter to a Math Macro which eats the following
- mathed cell in every instance of the macro in the buffer.
+Notion Append a greedy parameter to a Math Macro which eats the following mathed cell in every instance of the macro in the buffer.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Fold the Math Macro the cursor is in if it was unfolded, i.e.
- displayed as
+Notion Fold the Math Macro the cursor is in if it was unfolded, i.e. displayed as
\backslash
foo before.
\end_layout
\end_layout
\begin_layout Description
-Notion Turn the last optional parameter of a Math Macro into a non-optional
- parameter.
- The default value is remembered to be reused later if the user changes
- his mind.
+Notion Turn the last optional parameter of a Math Macro into a non-optional parameter. The default value is remembered to be reused later if the user changes his mind.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Turn the first non-optional parameter of a Math Macro into an optional
- parameter with a default value.
+Notion Turn the first non-optional parameter of a Math Macro into an optional parameter with a default value.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Remove a greedy parameter of a Math Macro and spit out the values
- of it in every instance of the macro in the buffer.
- If it is an optional parameter the [valud] format is used.
+Notion Remove a greedy parameter of a Math Macro and spit out the values of it in every instance of the macro in the buffer. If it is an optional parameter the [valud] format is used.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Remove the last optional parameter of a Math Macro and remove it
- in all the instances of the macro in the buffer.
+Notion Remove the last optional parameter of a Math Macro and remove it in all the instances of the macro in the buffer.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Remove the last parameter of a Math Macro and remove its value in
- all instances of the macro in the buffer.
+Notion Remove the last parameter of a Math Macro and remove its value in all instances of the macro in the buffer.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <NUM>: The number of the parameter to be deleted (1 for the first),
- defaults to the last one.
+Params <NUM>: The number of the parameter to be deleted (1 for the first), defaults to the last one.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Unfold the Math Macro the cursor is in, i.e.
- display it as
+Notion Unfold the Math Macro the cursor is in, i.e. display it as
\backslash
foo.
\end_layout
\end_layout
\begin_layout Description
-Params <ALIGN>: Alignment is a word composed of the vertical alignment (b,
- c or t) (i.e.
- 1 char) and the horizontal alignments (l, c or r) (i.e.
- <COL> chars).
+Params <ALIGN>: Alignment is a word composed of the vertical alignment (b, c or t) (i.e. 1 char) and the horizontal alignments (l, c or r) (i.e. <COL> chars).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action In text mode enters math mode (i.e.
- puts math insets on the current cursor position), in math mode enters text
- mode inside math expression.
+Action In text mode enters math mode (i.e. puts math insets on the current cursor position), in math mode enters text mode inside math expression.
\end_layout
\begin_layout Description
-Notion If there is some selected text, it puts the text inside created math
- box.
+Notion If there is some selected text, it puts the text inside created math box.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ARG>: eventual argument (LaTeX code) is passed to LFUN_MATH_INSERT
- .
+Params <ARG>: eventual argument (LaTeX code) is passed to LFUN_MATH_INSERT .
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Params <TYPE>: none|simple|equation|eqnarray|align|alignat|xalignat|xxalignat|
- multline|gather|flalign
+Params <TYPE>: none|simple|equation|eqnarray|align|alignat|xalignat|xxalignat| multline|gather|flalign
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-Note that ! is equivalent to negthinspace, , = thinspace, : = medspace,
- and ; = thickspace.
+Note that ! is equivalent to negthinspace, , = thinspace, : = medspace, and ; = thickspace.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Enters regexp mode (i.e., puts regexp insets on the current cursor
- position).
- Used by the advanced search dialog.
+Action Enters regexp mode (i.e., puts regexp insets on the current cursor position). Used by the advanced search dialog.
\end_layout
\begin_layout Description
-Notion If there is any selected text, then it is moved inside the created
- regexp inset.
+Notion If there is any selected text, then it is moved inside the created regexp inset.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-could be used to export a pdf with the answers branch included without one's
- having to open LyX and activate the branch manually.
+could be used to export a pdf with the answers branch included without one's having to open LyX and activate the branch manually.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <NAME>: Branch name.
- If it is not specified, you will be asked.
+Params <NAME>: Branch name. If it is not specified, you will be asked.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-could be used to export a pdf with the answers branch included without one's
- having to open LyX and activate the branch manually.
+could be used to export a pdf with the answers branch included without one's having to open LyX and activate the branch manually.
\end_layout
\begin_layout Description
Origin spitz, 30 Sep 2012
\end_layout
+\begin_layout Subsection*
+branch-sync-all
+\end_layout
+
+\begin_layout Description
+Action Open/close all insets of selected branch (depending on its activation status).
+\end_layout
+
+\begin_layout Description
+Syntax branch-sync-all
+\end_layout
+
+\begin_layout Description
+Origin sanda, 15 April 2022
+\end_layout
+
\begin_layout Subsection*
branches-rename
\end_layout
\end_layout
\begin_layout Description
-Params <OLDNAME>: Current name of the branch to be renamed <NEWNAME>: New
- name of the branch
+Params <OLDNAME>: Current name of the branch to be renamed <NEWNAME>: New name of the branch
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Saves the current buffer to a file named "#filename#".
- This LFUN is called automatically by LyX, to "autosave" the current buffer.
+Notion Saves the current buffer to a file named "#filename#". This LFUN is called automatically by LyX, to "autosave" the current buffer.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FILE>: Filename of the child.
- The directory of the parent is assumed by default.
+Params <FILE>: Filename of the child. The directory of the parent is assumed by default.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Closes the current buffer, asking whether to save it, etc, if the
- buffer has been modified.
+Notion Closes the current buffer, asking whether to save it, etc, if the buffer has been modified.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Closes all buffers, asking whether to save it, etc, if a buffer has
- been modified.
+Notion Closes all buffers, asking whether to save it, etc, if a buffer has been modified.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FORMAT> is either "custom" or one of the formats which you can find
- in Tools->Preferences->File formats->Format.
- Usual format you will enter is "pdf2" (pdflatex), "pdflatex" (plain tex
- for pdflatex) or "ps" for postscript.
+Params <FORMAT> is either "custom" or one of the formats which you can find in Tools->Preferences->File formats->Format. Usual format you will enter is "pdf2" (pdflatex), "pdflatex" (plain tex for pdflatex) or "ps" for postscript.
\begin_inset Newline newline
\end_inset
-In case of "custom" you will be asked for a format you want to start from
- and for the command that you want to apply to this format.
- Internally the control is then passed to LFUN_BUFFER_EXPORT_CUSTOM.
+In case of "custom" you will be asked for a format you want to start from and for the command that you want to apply to this format. Internally the control is then passed to LFUN_BUFFER_EXPORT_CUSTOM.
\begin_inset Newline newline
\end_inset
-If absent or "default", then the default output format of the document is
- used.
+If absent or "default", then the default output format of the document is used.
\begin_inset Newline newline
\end_inset
-<DEST> If present, this argument provides the export destination filename.
- Its containing folder will also be the destination folder, where all the
- needed external files will be copied.
+<DEST> If present, this argument provides the export destination filename. Its containing folder will also be the destination folder, where all the needed external files will be copied.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FORMAT> is the export format initially selected in the dialog.
- You can pass any of the formats which you can find in Tools->Preferences->File
- formats->Format, provided it has the "document" flag set.
- If no format is specified the dialog will start with the default output
- format of the current document.
+Params <FORMAT> is the export format initially selected in the dialog. You can pass any of the formats which you can find in Tools->Preferences->File formats->Format, provided it has the "document" flag set. If no format is specified the dialog will start with the default output format of the current document.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Exports the current buffer (document) from the given format using
- the given command on it.
+Action Exports the current buffer (document) from the given format using the given command on it.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FORMAT> format to start from (LyX will care to produce such intermediate
- file).
+Params <FORMAT> format to start from (LyX will care to produce such intermediate file).
\begin_inset Newline newline
\end_inset
-<COMMAND> this command will be launched on the file.
- Note that you can use "$$FName" string to qualify the intermediate file.
+<COMMAND> this command will be launched on the file. Note that you can use "$$FName" string to qualify the intermediate file.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion a buffer is `hidden' if it is internally open in LyX, but not visible
- in any window.
+Notion a buffer is `hidden' if it is internally open in LyX, but not visible in any window.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Sample Close all Notes in buffers:
+Sample Close all Notes in all buffers:
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Notion File can be imported iff lyx file format is (transitively) reachable
- via defined converters in preferences.
- Look in the File->Import menu to get an idea of the currently active import
- formats.
+Notion File can be imported iff lyx file format is (transitively) reachable via defined converters in preferences. Look in the File->Import menu to get an idea of the currently active import formats.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <LANG>: language name.
- See lib/languages for list.
+Params <LANG>: language name. See lib/languages for list.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Path for new files and templates can be set in Preferences dialog.
- Template will be asked for via Open-dialog.
+Notion Path for new files and templates can be set in Preferences dialog. Template will be asked for via Open-dialog.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FILE>: filename of created file with absolute path.
- If empty or "newfile", a file with appropriate name is generated.
- <TEMPLATE FILE>: filename of template with absolute path.
- If empty, a dialog is opened to select the new file.
+Params <FILE>: filename of created file with absolute path. If empty or "newfile", a file with appropriate name is generated. <TEMPLATE FILE>: filename of template with absolute path. If empty, a dialog is opened to select the new file.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Notion Note that this does not necessarily mean next in tabbar (for full
- list see View menu).
+Notion Note that this does not necessarily mean next in tabbar (for full list see View menu).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ARGS>: contains the particular settings to be saved.
- They obey the syntax you can find in document header of usual .lyx file.
+Params <ARGS>: contains the particular settings to be saved. They obey the syntax you can find in document header of usual .lyx file.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params dump: do not ask for any confirmation, just reload.
- All changes will be lost.
+Params dump: do not ask for any confirmation, just reload. All changes will be lost.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Removes the auxiliary file before next export to assure export is
- done afresh.
+Action Removes the auxiliary file before next export to assure export is done afresh.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ARGS>: contains the particular settings to be saved.
- They obey the syntax you can find in document header of usual .lyx file.
+Params <ARGS>: contains the particular settings to be saved. They obey the syntax you can find in document header of usual .lyx file.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <BUFFER>: path and filename of already opened (but possibly hidden)
- document which is to be shown.
+Params <BUFFER>: path and filename of already opened (but possibly hidden) document which is to be shown.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Action Toggle editing mode of the current document between read/write and
- read-only.
+Action Toggle editing mode of the current document between read/write and read-only.
\end_layout
\begin_layout Description
-Notion This function is not allowed if the file is under version control,
- since read-only flag is often used in version control file locking.
+Notion This function is not allowed if the file is under version control, since read-only flag is often used in version control file locking.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Exports the current document and put the result into the temporary
- directory.
+Action Exports the current document and put the result into the temporary directory.
\end_layout
\begin_layout Description
-Notion In case you are already viewing the exported document (see LFUN_BUFFER_VI
-EW) the output will be rewritten - updated.
- This is useful in case your viewer is able to detect such changes (e.g.
- ghostview for postscript).
+Notion In case you are already viewing the exported document (see LFUN_BUFFER_VIEW) the output will be rewritten - updated. This is useful in case your viewer is able to detect such changes (e.g. ghostview for postscript).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FORMAT>: The format to display, where this is one of the formats
- defined (in the current GUI) in the Tools>Preferences>File Formats dialog.
- If no format is given, the default format as specified in the same dialog
- is used.
+Params <FORMAT>: The format to display, where this is one of the formats defined in the Tools>Preferences>File Formats dialog, use the "Short name" field. If no format is given, the default format as specified in the same dialog is used.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Displays the contents of the current buffer in the chosen format,
- for example, PDF or DVI.
- This runs the necessary converter, calls the defined viewer, and so forth.
+Notion Displays the contents of the current buffer in the chosen format, for example, PDF or DVI. This runs the necessary converter, calls the defined viewer, and so forth.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FORMAT>: The format to display, where this is one of the formats
- defined (in the current GUI) in the Tools>Preferences>File Formats dialog.
- If no format is given, the default format as specified in the same dialog
- is used.
+Params <FORMAT>: The format to display, where this is one of the formats defined (in the current GUI) in the Tools>Preferences>File Formats dialog. If no format is given, the default format as specified in the same dialog is used.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Notion This LFUN is called by the "Show Output Anyway" button in the LaTeX
- Errors dialog.
- It can also be called by the user, which is useful if the document takes
- a long time to compile, and you just want to see the last previewed version.
+Notion This LFUN is called by the "Show Output Anyway" button in the LaTeX Errors dialog. It can also be called by the user, which is useful if the document takes a long time to compile, and you just want to see the last previewed version.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Saves the current buffer to disk, using the filename that is already
- associated with the buffer, asking for one if none is yet assigned.
+Notion Saves the current buffer to disk, using the filename that is already associated with the buffer, asking for one if none is yet assigned.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params force: write even if buffer is clean.
+Params force: write even if buffer is not marked as modified.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Params <FILENAME>: New name of the buffer/file.
- A relative path is with respect to the original location of the buffer/file.
+Params <FILENAME>: New name of the buffer/file. A relative path is with respect to the original location of the buffer/file.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Params <FILENAME>: New name of the buffer/file.
- A relative path is with respect to the original location of the
- buffer/file.
+Params <FILENAME>: New name of the buffer/file. A relative path is with respect to the original location of the buffer/file.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Params <ZOOM>: The target zoom value in %; the default is the default zoom
- as saved in preferences.
+Params <ZOOM>: The target zoom value in %; the default is the default zoom as saved in preferences.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ZOOM>: The zoom value addition in % (neg.
- or pos.); the default is 10% of the default zoom as saved in preferences.
+Params <ZOOM>: The zoom value addition in % (neg. or pos.); the default is 10% of the default zoom as saved in preferences.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <ZOOM>: The zoom value abstraction in % (neg.
- or pos.); the default is 10% of the default zoom as saved in preferences.
+Params <ZOOM>: The zoom value abstraction in % (neg. or pos.); the default is 10% of the default zoom as saved in preferences.
\end_layout
\begin_layout Description
\begin_layout Description
Notion Latex file with extension
\backslash
-literate_extension is generated.
- Then LyX invokes
+literate_extension is generated. Then LyX invokes
\backslash
build_command (with a default of ``make'') to generate the code and
\backslash
\begin_inset Newline newline
\end_inset
-In case you want to process your literate file with a script, or some other
- program, just insert in your lyxrc file an entry with:
+In case you want to process your literate file with a script, or some other program, just insert in your lyxrc file an entry with:
\begin_inset Newline newline
\end_inset
\backslash
build_error_filter differs from the
\backslash
-literate_error_filter only in that the former will identify error messages
- from your compiler.
+literate_error_filter only in that the former will identify error messages from your compiler.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <SIZE> : the icon size in px or one of the logical settings small|normal|
-big|huge|giant, the default is normal (whose size in px is icon set dependent).
+Params <SIZE> : the icon size in px or one of the logical settings small|normal|big|huge|giant, the default is normal (whose size in px is icon set dependent).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion In a buffer, the function will be disabled if the buffer has no master
- or children.
- It thus allows to enable actions only in documents with master/children
+Notion In a buffer, the function will be disabled if the buffer has no master or children. It thus allows to enable actions only in documents with master/children
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Terminates the current LyX instance, asking whether to save modified
- documents, etc.
+Notion Terminates the current LyX instance, asking whether to save modified documents, etc.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Open lyxfiles (templates/examples).
- Create a view if he have none.
+Action Open lyxfiles (templates/examples). Create a view if he have none.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TYPE>: templates or examples.
- Default is templates.
+Params <TYPE>: templates or examples. Default is templates.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FORMAT> is one of the formats which you can find in Tools->Preferences->
-File formats->Format.
- Usual format you will enter is "pdf2" (pdflatex), "pdflatex" (plain tex
- for pdflatex) or "ps" for postscript.
+Params <FORMAT> is one of the formats which you can find in Tools->Preferences->File formats->Format. Usual format you will enter is "pdf2" (pdflatex), "pdflatex" (plain tex for pdflatex) or "ps" for postscript.
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-If absent or "default", then the default output format of the document is
- used.
+If absent or "default", then the default output format of the document is used.
\begin_inset Newline newline
\end_inset
-<DEST> If present, this argument provides the export destination filename.
- Its containing folder will also be the destination folder, where all the
- needed external files will be copied.
+<DEST> If present, this argument provides the export destination filename. Its containing folder will also be the destination folder, where all the needed external files will be copied.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Applies a command to a buffer and all it children, starting from
- the master.
+Action Applies a command to a buffer and all it children, starting from the master.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Update (export) the document built from the master buffer, if the
- current buffer is part of a master/child document.
+Action Update (export) the document built from the master buffer, if the current buffer is part of a master/child document.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FORMAT>: The format to display, where this is one of the formats
- defined (in the current GUI) in the Tools>Preferences>File Formats dialog.
- If no format is given, the default format as specified in the same dialog
- is used.
+Params <FORMAT>: The format to display, where this is one of the formats defined (in the current GUI) in the Tools>Preferences>File Formats dialog. If no format is given, the default format as specified in the same dialog is used.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Show a preview built from the master buffer, if available.
- if the current buffer is part of a master/child document.
+Action Show a preview built from the master buffer, if available. if the current buffer is part of a master/child document.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FORMAT>: The format to display, where this is one of the formats
- defined (in the current GUI) in the Tools>Preferences>File Formats dialog.
- If no format is given, the default format as specified in the same dialog
- is used.
+Params <FORMAT>: The format to display, where this is one of the formats defined (in the current GUI) in the Tools>Preferences>File Formats dialog. If no format is given, the default format as specified in the same dialog is used.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <NAME>: menu name.
- See various .inc files in lib/ui for candidates.
+Params <NAME>: menu name. See various .inc files in lib/ui for candidates.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Notion This only closes the work areas, not the buffers themselves.
- The still opened buffers can be visualized in another tab group.
+Notion This only closes the work areas, not the buffers themselves. The still opened buffers can be visualized in another tab group.
\end_layout
\begin_layout Description
Origin Abdel, 21 Feb 2008
\end_layout
+\begin_layout Subsection*
+tab-group-next
+\end_layout
+
+\begin_layout Description
+Action Switch to the next tab group in split view.
+\end_layout
+
+\begin_layout Description
+Syntax tab-group-next
+\end_layout
+
+\begin_layout Subsection*
+tab-group-previous
+\end_layout
+
+\begin_layout Description
+Action Switch to the previous tab group in split view.
+\end_layout
+
+\begin_layout Description
+Syntax tab-group-previous
+\end_layout
+
\begin_layout Subsection*
toolbar-movable
\end_layout
\end_layout
\begin_layout Description
-Params <NAME>: *|standard|extra|table|math|mathmacrotemplate| minibuffer|review|
-view/update|math_panels|vcs| view-others|update-others
+Params <NAME>: *|standard|extra|table|math|mathmacrotemplate| minibuffer|review|view/update|math_panels|vcs| view-others|update-others
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
- minibuffer|review|view/update|math_panels|vcs| view-others|upd
-ate-others
+ minibuffer|review|view/update|math_panels|vcs| view-others|update-others
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params statusbar : Toggle visibility of the statusbar.
+Params statusbar : Toggle visibility of the statusbar.
+\begin_inset Newline newline
+\end_inset
+
+menubar : Toggle visibility of the menubar.
+\begin_inset Newline newline
+\end_inset
+
+scrollbar : Toggle visibility of the scrollbar.
+\begin_inset Newline newline
+\end_inset
+
+frame : Toggle visibility of the frames around editing window.
\begin_inset Newline newline
\end_inset
-menubar : Toggle visibility of the menubar.
+zoomslider : Toggle visibility of the zoom slider in statusbar.
\begin_inset Newline newline
\end_inset
-scrollbar : Toggle visibility of the scrollbar.
+zoomlevel : Toggle visibility of the zoom level display in statusbar.
\begin_inset Newline newline
\end_inset
-frame : Toggle visibility of the frames around editing window.
+statistics-w : Toggle visibility of the document word count in statusbar.
\begin_inset Newline newline
\end_inset
-fullscreen : Toggle fullscreen mode.
- This also covers calling the previous functions.
- However LFUN_TOOLBAR_TOGGLE for the custom tweaks of the toolbars should
- be used.
+statistics-cb : Toggle visibility of the document character count (incl. blanks) in statusbar.
+\begin_inset Newline newline
+\end_inset
+
+statistics-c : Toggle visibility of the document character count (excl. blanks) in statusbar.
+\begin_inset Newline newline
+\end_inset
+
+fullscreen : Toggle fullscreen mode. This also covers calling the previous functions. However LFUN_TOOLBAR_TOGGLE for the custom tweaks of the toolbars should be used.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Close the current work area.
- If no other work areas are showing the buffer, then close the associated
- buffer as well.
+Notion Close the current work area. If no other work areas are showing the buffer, then close the associated buffer as well.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Already opened documents from the previous window can be found under
- View menu.
+Notion Already opened documents from the previous window can be found under View menu.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <GEOMETRY>: pass the geometry of the window.
- This parameter is currently accepted only on Windows platform.
+Params <GEOMETRY>: pass the geometry of the window. This parameter is currently accepted only on Windows platform.
\end_layout
\begin_layout Description
System Functions (Preferences, LyX Server etc.)
\end_layout
+\begin_layout Subsection*
+bibtex-database-list
+\end_layout
+
+\begin_layout Description
+Action Lists the available databases (separated by path separator common on the used OS).
+\end_layout
+
+\begin_layout Description
+Notion Used by bibliographic managers
+\end_layout
+
+\begin_layout Description
+Syntax bibtex-database-list
+\end_layout
+
+\begin_layout Description
+Origin bpiwowar, 18 December 2022
+\end_layout
+
\begin_layout Subsection*
buffer-toggle-output-sync
\end_layout
\begin_layout Description
-Action Toggles including of resources for forward/reverse search of the
- given document.
+Action Toggles including of resources for forward/reverse search of the given document.
\end_layout
\begin_layout Description
-Notion When toggled on, SyncTeX is invoked for PDF, while srcltx package
- is used for DVI.
- Custom LaTeX macro can be defined in preferences.
+Notion When toggled on, SyncTeX is invoked for PDF, while srcltx package is used for DVI. Custom LaTeX macro can be defined in preferences.
\end_layout
\begin_layout Description
A .def file allows to define a command with
\backslash
-define "<NAME>" "<LFUN>" where <NAME> is the name of the new command and
- <LFUN> is the lfun code to be executed (see e.g.
- LFUN_COMMAND_SEQUENCE).
-
+define "<NAME>" "<LFUN>" where <NAME> is the name of the new command and <LFUN> is the lfun code to be executed (see e.g. LFUN_COMMAND_SEQUENCE).
\backslash
def_file "FileName" allows to include another .def file.
\begin_inset Newline newline
\end_inset
-This is particularly useful in connection with toolbar buttons: Since the
- name of the button image for this lfun is lib/images/commands/<NAME>.png
- this is the way to assign an image to a complex command-sequence.
+This is particularly useful in connection with toolbar buttons: Since the name of the button image for this lfun is lib/images/commands/<NAME>.png this is the way to assign an image to a complex command-sequence.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion This can be used to bind multiple functions to a single key, and
- then which one is used will depend upon the context.
+Notion This can be used to bind multiple functions to a single key, and then which one is used will depend upon the context.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Determine whether to keep cursor inside the editing window regardless
- of the scrollbar movement.
+Action Determine whether to keep cursor inside the editing window regardless of the scrollbar movement.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <LEVEL>: comma separated list of levels or the correspondent number
- of their combination.
- 0 is equivalent to disabling all debug events.
- See lyx -dbg for the current list of debug levels and their numbers.
+Params <LEVEL>: comma separated list of levels or the correspondent number of their combination. 0 is equivalent to disabling all debug events. See lyx -dbg for the current list of debug levels and their numbers.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion in so called "devel" mode, the information given in the status bar
- is more precise, and the help documents are open in editing mode.
+Notion in so called "devel" mode, the information given in the status bar is more precise, and the help documents are open in editing mode.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Sets the cursor position in the previewed (dvi/pdf) file based on
- the row number in LyX window.
+Action Sets the cursor position in the previewed (dvi/pdf) file based on the row number in LyX window.
\end_layout
\begin_layout Description
-Notion The external program used for forward search call can be specified
- in LyX Output preferences.
- See Additional manual for details of these settings.
+Notion The external program used for forward search call can be specified in LyX Output preferences. See Additional manual for details of these settings.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <SETTINGS>: settings which are to be set.
- Take a look into ~/.lyx/preferences to get an idea which commands to use
- and their syntax.
- lyx::LyXRC::LyXRCTags has the list of possible commands.
+Params <SETTINGS>: settings which are to be set. Take a look into ~/.lyx/preferences to get an idea which commands to use and their syntax. lyx::LyXRC::LyXRCTags has the list of possible commands.
\end_layout
\begin_layout Subsection*
\end_layout
\begin_layout Description
-Params <type>: language|color|sectioning|font|series|shape|family|markup|underli
-ne|strike|deleted
+Params <type>: language|color|sectioning|font|series|shape|family|markup|underline|strike|deleted|non-output-content
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Returns the current layout (that is environment) name on the cursor
- position.
+Action Returns the current layout (that is environment) name on the cursor position.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Returns the statistics (number of words and characters) in the document
- or in the given selection.
+Action Returns the statistics (number of words and characters) in the document or in the given selection.
\end_layout
\begin_layout Description
-Notion Note that this function gives the number of words/chars written,
- not the number of characters which will be typeset.
+Notion Note that this function gives the number of words/chars written, not the number of characters which will be typeset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <TYPE>: <words|chars|chars-space> The requested count; if not specified,
- the three values are returned, separated by a space.
+Params <TYPE>: <words|chars|chars-space> The requested count; if not specified, the three values are returned, separated by a space.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Action Sets the cursor position in LyX based on the row number of generated
- TeX file.
+Action Sets the cursor position in LyX based on the row number of generated TeX file.
\end_layout
\begin_layout Description
-Notion This can be useful for DVI inverse-search or detection of the problematic
- line from LaTeX compilation.
- Note that before this function can be used export to LaTeX output must
- occur (in order to map the row numbers).
+Notion This can be useful for DVI inverse-search or detection of the problematic line from LaTeX compilation. Note that before this function can be used export to LaTeX output must occur (in order to map the row numbers).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params <FILE>: the path and filename.
- Environment variables are expanded in the path.
- In case this LFUN does not work make sure you are giving correct path to
- the file.
+Params <FILE>: the path and filename. Environment variables are expanded in the path. In case this LFUN does not work make sure you are giving correct path to the file.
\begin_inset Newline newline
\end_inset
-If the file is located inside LyX temporary directory it will be mapped
- back into the appropriate opened buffer (e.g.
- for the case of generated .tex file).
+If the file is located inside LyX temporary directory it will be mapped back into the appropriate opened buffer (e.g. for the case of generated .tex file).
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Notion This can be used to grab last key-sequence used inside the LyX window.
- See also Debug extensions section in Additional features manual.
+Notion This can be used to grab last key-sequence used inside the LyX window. See also Debug extensions section in Additional features manual.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Sets the cursor position based on the editing area coordinates (similar
- to clicking on that point with left mouse button).
+Action Sets the cursor position based on the editing area coordinates (similar to clicking on that point with left mouse button).
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Set the given LyX color to the color defined by the X11 name given,
- and optionally a specific color for dark mode.
+Action Set the given LyX color to the color defined by the X11 name given, and optionally a specific color for dark mode.
\end_layout
\begin_layout Description
-Notion A new color entry is created if the color is unknown.
- Color names can be stored as a part of user settings.
+Notion A new color entry is created if the color is unknown. Color names can be stored as a part of user settings.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Count the statistics (number of words and characters) in the document
- or in the given selection and display it in a dialog box.
+Action Count the statistics (number of words and characters) in the document or in the given selection and display it in a dialog box.
\end_layout
\begin_layout Description
-Notion Note that this function gives the number of words/chars written,
- not the number of characters which will be typeset.
+Notion Note that this function gives the number of words/chars written, not the number of characters which will be typeset.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Executes external command.
- This command is intended to support additional VCS commands.
+Action Executes external command. This command is intended to support additional VCS commands.
\end_layout
\begin_layout Description
\begin_inset Newline newline
\end_inset
-R - Reload - ensure that the document is saved and reload it after command
- execution
+R - Reload - ensure that the document is saved and reload it after command execution
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-<PATH>: path where to start.
- $$p will be replaced by the current document path.
+<PATH>: path where to start. $$p will be replaced by the current document path.
\begin_inset Newline newline
\end_inset
-<COMMAND>: command to execute.
- $$i/$$p/$$m will be replaced by the current document(with absolute path)/path/m
-essage.
+<COMMAND>: command to execute. $$i/$$p/$$m will be replaced by the current document(with absolute path)/path/message.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Params Revision number either points directly to commit in history or if
- negative number -x it points to (last commit - x).
+Params Revision number either points directly to commit in history or if negative number -x it points to (last commit - x).
\begin_inset Newline newline
\end_inset
-In RCS we subtract only in the last number of revision specification.
- Special case "0" is reserved for the last committed revision.
+In RCS we subtract only in the last number of revision specification. Special case "0" is reserved for the last committed revision.
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-<REV2>: Newer file.
- Used only if REV1 > 0.
+<REV2>: Newer file. Used only if REV1 > 0.
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Description
-Notion Copying with revision history is only supported by SVN.
- For RCS and CVS it is simulated by adding the document under a new name.
- Disabled if uncommitted changes exist.
+Notion Copying with revision history is only supported by SVN. For RCS and CVS it is simulated by adding the document under a new name. Disabled if uncommitted changes exist.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion File is registered inside cvs, svn or rcs repository acording to
- the existence of cvs/svn/rcs entries in the document's directory.
+Notion File is registered inside cvs, svn or rcs repository acording to the existence of cvs/svn/rcs entries in the document's directory.
\begin_inset Newline newline
\end_inset
-See LyX Additional Features Manual (Version Control Chapter) for additional
- information.
+See LyX Additional Features Manual (Version Control Chapter) for additional information.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Renaming with revision history is only supported by SVN.
- For CVS it is simulated by adding the document under a new name and deleting
- the old one.
- For RCS it is not supported.
- Disabled if uncommitted changes exist.
+Notion Renaming with revision history is only supported by SVN. For CVS it is simulated by adding the document under a new name and deleting the old one. For RCS it is not supported. Disabled if uncommitted changes exist.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Action Update the local archive directory in which resides the current document
- with the remote repository.
+Action Update the local archive directory in which resides the current document with the remote repository.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion On Linux and Mac OS, this action brings the LyX window into focus.
- Such behavior is not allowed by Windows OS so instead the color of the
- taskbar entry is changed to indicate that the window has changed in some
- way.
- This action is useful in combination with reverse search.
+Notion On Linux and Mac OS, this action brings the LyX window into focus. Such behavior is not allowed by Windows OS so instead the color of the taskbar entry is changed to indicate that the window has changed in some way. This action is useful in combination with reverse search.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Automatically replace the currently selected text.
- Depends on lyxrc settings "auto_region_delete".
+Notion Automatically replace the currently selected text. Depends on lyxrc settings "auto_region_delete".
\end_layout
\begin_layout Description
\end_layout
\begin_layout Description
-Notion Brings the LyX window to the front.
- Such behavior is allowed on Windows only when no other application has
- focus.
- This action is used when LyX is in single instance mode.
+Notion Brings the LyX window to the front. Such behavior is allowed on Windows only when no other application has focus. This action is used when LyX is in single instance mode.
\end_layout
\begin_layout Description
projects / lyx.git / blobdiff