-#LyX 1.6.7 created this file. For more info see http://www.lyx.org/
-\lyxformat 345
+#LyX 2.0 created this file. For more info see http://www.lyx.org/
+\lyxformat 413
\begin_document
\begin_header
\textclass scrbook
\mainmatter }
% provides caption formatting
-\usepackage[labelfont={bf,sf}, tableposition=top]{caption}[2004/07/16]
+\usepackage[labelfont={bf,sf}]{caption}[2004/07/16]
% provides commands to set caption
% beside tables/images
% enables calculation of values,
\usepackage{calc}
-% provides special table cell alignments
-\usepackage{dcolumn}
-
% increase the bottom float placement fraction
\renewcommand{\bottomfraction}{0.5}
\setboolean{colortbl}{true}}
{\setboolean{colortbl}{false}}
-% used for multirows
-\usepackage{multirow}
-%\renewcommand{\multirowsetup}{\centering}
-
% used for book-style tables
\usepackage{booktabs}
% number algorithm floats within chapters
\numberwithin{algorithm}{chapter}
-% redefine the greyed out note
-\renewenvironment{lyxgreyedout}
- {\textcolor{blue}\bgroup}{\egroup}
-
% ------------------------------------
% used to check for needed LaTeX packages
\usepackage{ifthen}
L\kern-.1667em\lower.25em\hbox{Y}\kern-.125emX\@}
{LyX}}
\end_preamble
-\options fleqn,liststotoc,bibtotoc,idxtotoc,BCOR7.5mm,titlepage,tablecaptionabove
+\options fleqn,bibliography=totoc,index=totoc,BCOR7.5mm,titlepage,captions=tableheading
\use_default_options false
+\maintain_unincluded_children false
\language english
+\language_package default
\inputencoding auto
+\fontencoding global
\font_roman default
\font_sans default
\font_typewriter default
\font_default_family default
+\use_non_tex_fonts false
\font_sc false
\font_osf false
\font_sf_scale 100
\font_tt_scale 100
\graphics default
+\default_output_format default
+\output_sync 0
+\bibtex_command default
+\index_command default
\paperfontsize 12
\spacing single
\use_hyperref true
\use_geometry false
\use_amsmath 2
\use_esint 0
+\use_mhchem 1
+\use_mathdots 1
\cite_engine basic
\use_bibtopic false
+\use_indices false
\paperorientation portrait
+\suppress_date false
+\use_refstyle 0
+\notefontcolor #0000ff
+\index Index
+\shortcut idx
+\color #008000
+\end_index
\secnumdepth 3
\tocdepth 3
\paragraph_separation skip
\bullet 3 2 7 -1
\tracking_changes false
\output_changes false
-\author ""
-\author ""
+\html_math_output 0
+\html_css_as_file 0
+\html_be_strict false
\end_header
\begin_body
\family sans
-Version 1.6.x
+Version 2.0.x
\end_layout
\begin_layout Standard
\begin_layout Chapter
Figures
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Section
Graphics Dialog
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
Name
\family default
allows you define or join an image settings group.
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
+
+\begin_inset CommandInset label
+LatexCommand label
+name "fig2:Two-distorted-images-2"
+
+\end_inset
+
Two distorted images.
Both images are in the image settings group named
\begin_inset Quotes eld
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Chapter
Tables
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Section
Introduction
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="4">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Section
Table Dialog
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
contents
\emph default
of the cell, and the cell itself.
- You can alter tables with the following tabs of the table dialog:
+\begin_inset Newline newline
+\end_inset
+
+With the dialog option
+\family sans
+Immediate
+\begin_inset space ~
+\end_inset
+
+Apply
+\family default
+ every change you make in the dialog is directly applied.
+ If you move the cursor to another table cell the dialog will then also
+ be updated with the parameters of the new cell.
+ If you change length values in the dialog you must press return to get
+ the change applied.
+\begin_inset Newline newline
+\end_inset
+
+You can alter tables with the following tabs of the table dialog:
\end_layout
\begin_layout Description
Settings
\family default
- Here you can set the horizontal alignment and the width of the current
- column.
+ Here you can set the table width
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table ! Width
+\end_layout
+
+\end_inset
+
+, and the horizontal alignment and the width of the current column.
+ The alignment
+\family sans
+At
+\begin_inset space ~
+\end_inset
+
+Decimal
+\begin_inset space ~
+\end_inset
+
+Separator
+\family default
+ is described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Special-Cell-Alignment"
+
+\end_inset
+
+.
When you have set a width you can also adjust the vertical alignment of
the current row.
A given width will allow the cell to have line breaks and multiple paragraphs
\end_inset
.
- If you set no width, the column is as wide as the content of the widest
+ If you set no width, the column is as wide as the content of its widest
cell.
\begin_inset Newline newline
\end_inset
LatexCommand ref
reference "sub:Multicolumns"
+\end_inset
+
+ or the cells of one column as multirow cell, see section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Multirows"
+
\end_inset
.
\end_inset
+\begin_inset Newline newline
+\end_inset
+
+The table-wide vertical alignment is used for tables within text lines:
+\begin_inset Newline newline
+\end_inset
+
+A line with tables with different alignments:
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="top">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+A
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+A
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="bottom">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+A
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
\begin_inset Newline newline
\end_inset
describe the longtable features in detail.
\end_layout
-\begin_layout Standard
-When the table dialog is open, you can move the cursor with the arrow keys
- from cell to cell and the property of the current cell will immediately
- be displayed in the dialog.
-\end_layout
-
\begin_layout Section
Table Toolbar
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
right-aligns the content of the current cell / column
\end_layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Graphics
+ filename ../images/tabular-feature_align-decimal.png
+ scaleBeforeRotation
+
+\end_inset
+
+ aligns the content of the current column at a character
+\end_layout
+
\begin_layout Labeling
\labelwidthstring 00.00.0000
\begin_inset Graphics
sets the current cell or selection as a multicolumn
\end_layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Graphics
+ filename ../images/tabular-feature_multirow.png
+ scaleBeforeRotation
+
+\end_inset
+
+ sets the current cell or selection as a multirow
+\end_layout
+
\begin_layout Standard
\begin_inset Note Greyedout
status open
\begin_layout Section
Edit Table Menu
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
\color none
\begin_inset Formula $\left[\begin{array}{cc}
a & b\\
-c & d\end{array}\right]$
+c & d
+\end{array}\right]$
\end_inset
caption
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="69" columns="3">
-<features islongtable="true">
+<features islongtable="true" longtabularalignment="center">
<column alignment="left" valignment="top" width="0cm">
<column alignment="left" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Longtable Alignment
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-Longtables are by default centered.
- Unlike the alignment of the table columns and rows, the table alignment
- can currently not be changed in the table dialog.
- To change the alignment of longtables you have to change the value of the
- lengths
+The horizontal alignment of longtables can be set in the table settings
+ dialog.
+ For left- and right-alignment the table will be directly at the page border.
+ To add space between the table and the border one has to set the alignment
+ to center and change the value of the LaTeX-lengths
\series bold
\backslash
LTleft
\series default
-and
+or
\series bold
\backslash
LTright
\series default
- by inserting this line as TeX-Code before the corresponding longtable:
+ by inserting this line as TeX-Code before the longtable:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-where the value can have any of the units listed in Table
+The value can have any of the units listed in Table
\begin_inset space ~
\end_inset
\end_layout
\begin_layout Standard
-The following longtable was left-aligned by setting
+The following longtable was centered and
\series bold
\backslash
LTleft
\series default
- to 0
-\begin_inset space \thinspace{}
-\end_inset
-
-pt.
+ set to
+\family sans
+0.1
+\backslash
+columnwidth
+\family default
+:
\begin_inset ERT
status collapsed
\backslash
setlength{
\backslash
-LTleft}{0pt}
+LTleft}{0.1
+\backslash
+columnwidth}
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="5" columns="5">
-<features islongtable="true">
-<column alignment="center" valignment="top" width="0">
+<features islongtable="true" longtabularalignment="center">
<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Subsection
Longtable Captions
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="5">
-<features islongtable="true">
+<features islongtable="true" longtabularalignment="center">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Plain Layout
Longtable with caption
-\begin_inset OptArg
+\begin_inset Argument
status open
\begin_layout Plain Layout
hyperref
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsubsection
References to Longtables
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="5">
-<features islongtable="true">
+<features islongtable="true" longtabularalignment="center">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
caption
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsubsection
Caption Width
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="5">
-<features islongtable="true">
+<features islongtable="true" longtabularalignment="center">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Plain Layout
long full title with default width long full title with default width long
full title with default width
-\begin_inset OptArg
+\begin_inset Argument
status collapsed
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="5">
-<features islongtable="true">
+<features islongtable="true" longtabularalignment="center">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\end_inset
cm
-\begin_inset OptArg
+\begin_inset Argument
status collapsed
\begin_layout Plain Layout
caption
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsubsection
Different Captions for Table Pages
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="59" columns="3">
-<features islongtable="true" lastFootEmpty="true">
+<features islongtable="true" lastFootEmpty="true" longtabularalignment="center">
<column alignment="left" valignment="top" width="0cm">
<column alignment="left" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
\end_inset
-\begin_inset OptArg
+\begin_inset Argument
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Longtable Calculation
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Floats and Longtables
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Forced Page Breaks
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="38" columns="3">
-<features islongtable="true" lastFootEmpty="true">
+<features islongtable="true" lastFootEmpty="true" longtabularalignment="center">
<column alignment="left" valignment="top" width="0cm">
<column alignment="left" valignment="top" width="3cm">
<column alignment="center" valignment="top" width="0pt">
\end_inset
-\begin_inset OptArg
+\begin_inset Argument
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="middle" width="2.5cm">
<column alignment="center" valignment="middle" width="0">
<column alignment="center" valignment="middle" width="0">
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="middle" width="2.5cm">
<column alignment="center" valignment="middle" width="0">
<column alignment="center" valignment="middle" width="0">
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="middle" width="2.5cm">
<column alignment="center" valignment="middle" width="0">
<column alignment="center" valignment="middle" width="0">
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\family sans
Multicolumn
\family default
- in the appearing context menu.
+ in the context menu.
\end_layout
\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="4">
-<features firstHeadTopDL="true" firstHeadBottomDL="true">
+<features firstHeadTopDL="true" firstHeadBottomDL="true" tabularvalignment="middle">
<column alignment="center" valignment="top" width="0pt">
<column alignment="center" valignment="middle" width="0">
<column alignment="center" valignment="top" width="0in">
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
Table with centered multicolumn text above two columns that have exactly
half the width of the multicolumn cell
-\begin_inset OptArg
+\begin_inset Argument
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="middle" width="0" special=">{\centering}m{1.25cm-6.2pt}">
<column alignment="center" valignment="middle" width="0">
<column alignment="center" valignment="top" width="0">
Table where the spanned table columns are not exactly half the width of
the multicolumn cell
-\begin_inset OptArg
+\begin_inset Argument
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="1.25cm">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\end_inset
:
-\begin_inset Formula \begin{equation}
-W_{g\, n}=(W_{g\,\mathrm{multicolumn}}+(1-n)\cdot(12.4\,\mathrm{pt}))/n\label{eq:Wgn}\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{g\, n}=(W_{g\,\mathrm{multicolumn}}+(1-n)\cdot(12.4\,\mathrm{pt}))/n\label{eq:Wgn}
+\end{equation}
\end_inset
\end_inset
becomes
-\begin_inset Formula \begin{equation}
-W_{g\,2}=1.25\,\mathrm{cm}-6.2\,\mathrm{pt}\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{g\,2}=1.25\,\mathrm{cm}-6.2\,\mathrm{pt}
+\end{equation}
\end_inset
calc
\series default
must be loaded with the document preamble line
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Multirows
-\begin_inset Index
+\begin_inset CommandInset label
+LatexCommand label
+name "sub:Multirows"
+
+\end_inset
+
+
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-Unlike multicolumns multirows are not yet supported by LyX; so a bit of
- TeX-Code needs to be used.
- To use multirows load the LaTeX-package
-\series bold
+To merge cells over multiple rows, select as many cells within a column
+ as you want to merge and use either the table-toolbar button
+\begin_inset Graphics
+ filename ../images/tabular-feature_multirow.png
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+
+, or the menu
+\family sans
+Edit\SpecialChar \menuseparator
+Table\SpecialChar \menuseparator
+Multirow
+\family default
+, or right click on the marked cells and choose
+\family sans
+Multirow
+\family default
+ in the context menu.
+\end_layout
+
+\begin_layout Standard
+Here is an example table with a multirow in the first column:
+\end_layout
+
+\begin_layout Standard
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" width="0">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+a long cell entry
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+b
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+c
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell multirow="3" alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
multirow
-\series default
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! multirow
+e
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+f
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell multirow="4" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+h
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+i
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
- in your document preamble with the command
\end_layout
\begin_layout Standard
+The width of multirow cells is set by setting the width and alignment for
+ the whole column.
+ The
+\family sans
+Vertical Offset
+\family default
+ shifts the content of the multirow up/down if the offset is positive/negative.
+\end_layout
+\begin_layout Standard
+If the column of a multirow cell has no explicit width, the multirow cell
+ inherits the alignment of the column.
+ Otherwise it is by default left-aligned.
+ To override the default, renew the command
\series bold
\backslash
-usepackage{multirow}
+multirowsetup
+\series default
+ with the command
\end_layout
\begin_layout Standard
-Multirows are created with the command
+
+\series bold
+
+\backslash
+renewcommand{
+\backslash
+multirowsetup}{
+\backslash
+centering}
\end_layout
\begin_layout Standard
+in the document preamble.
+ Then all entries of multirow cells in the document are centered.
+ If centering is only needed for several tables, you can renew the command
+ in a TeX-Code box just before the table instead of the preamble.
+ If the text should be right-aligned, replace
+\series bold
+\backslash
+centering
+\series default
+ by
\series bold
\backslash
-multirow{number of rows}{cell width}{cell entry}
+raggedleft
+\series default
+.
+ To return to left-alignment
+\series bold
+
+\backslash
+raggedright
+\series default
+ is used.
\end_layout
\begin_layout Standard
-To create the following table:
+This is an example table with a right-aligned multirow cell that has a vertical
+ offset of -4
+\begin_inset space \thinspace{}
+\end_inset
+
+mm and is in a 3
+\begin_inset space \thinspace{}
+\end_inset
+
+cm wide column:
\end_layout
\begin_layout Standard
+\noindent
\align center
\begin_inset ERT
status collapsed
\backslash
multirowsetup}{
\backslash
-centering}
+raggedleft}
\end_layout
\end_inset
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="4" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="3cm">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<row>
\begin_inset Text
\begin_layout Plain Layout
-a
+a long cell entry
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+t
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-multirow{2}{2.5cm}{
+\begin_layout Plain Layout
+n
\end_layout
\end_inset
-
-multirow entry
-\begin_inset ERT
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-}
+m
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell multirow="3" mroffset="-4mm" alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+multirow
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+<cell multirow="4" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_layout
-\begin_layout Standard
-create a 3×3 table.
- Unset the upper border of the last cell in the first column.
- The multirow is now created in the second row of the first column by inserting
- there the command
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-multirow{2}{2.5cm}{
-\end_layout
-
-\begin_layout Standard
-as TeX-Code.
- According to the command parameters the multirow spans now two rows and
- has a width of 2.5
-\begin_inset space \thinspace{}
-\end_inset
-
-cm.
- The content of the multirow cell follows outside the TeX-Code box and the
- command is finished with a right brace
-\series bold
-}
-\series default
- in another TeX-Code-box after the text.
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-multirow
-\series default
- left-aligns its content by default.
- To override the default, renew the command
-\series bold
-
-\backslash
-multirowsetup
-\series default
- with the command
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-renewcommand{
-\backslash
-multirowsetup}{
-\backslash
-centering}
-\end_layout
-
-\begin_layout Standard
-in TeX-Code in the document preamble.
- Then all entries of multirow cells in the document are centered.
- If centering is only needed for several tables, you can renew the command
- in a TeX-Code box just before the table instead of the preamble.
- If the text should be right-aligned, replace
-\series bold
-
-\backslash
-centering
-\series default
- by
-\series bold
-
-\backslash
-raggedleft
-\series default
-.
- To return to left-alignment
-\series bold
-
-\backslash
-raggedright
-\series default
- is used.
-\end_layout
-
\begin_layout Section
Formal Tables
\begin_inset CommandInset label
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="8" columns="4">
-<features booktabs="true">
+<features booktabs="true" tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_inset Text
\begin_layout Plain Layout
-Medipix
+Chip
\begin_inset space \thinspace{}
\end_inset
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" usebox="none">
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Medipix
+Chip
\begin_inset space \thinspace{}
\end_inset
\end_inset
-Detector thickness [µm]
+Detector thickness in µm
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Edge angle [°]
+Edge angle in °
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Spatial resolution [µm]
+Spatial resolution in µm
\end_layout
\end_inset
\end_inset
.
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="8" columns="4">
-<features booktabs="true">
+<features booktabs="true" tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_inset Text
\begin_layout Plain Layout
-Medipix
+Chip
\begin_inset space \thinspace{}
\end_inset
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" usebox="none">
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Medipix
+Chip
\begin_inset space \thinspace{}
\end_inset
\end_inset
-Detector thickness [µm]
+Detector thickness in µm
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Edge angle [°]
+Edge angle in °
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Spatial resolution [µm]
+Spatial resolution in µm
\end_layout
\end_inset
\begin_layout Section
Vertical Table Alignment
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "15col%"
special "none"
height "1in"
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "15col%"
special "none"
height "1in"
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "15col%"
special "none"
height "1in"
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "15col%"
special "none"
height "1in"
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "15col%"
special "none"
height "1in"
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Colored Cells
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
colortbl
\series default
-\begin_inset OptArg
+\begin_inset Argument
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
colortbl
\series default
.
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
colortbl
\series default
-\begin_inset OptArg
+\begin_inset Argument
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0" special=">{\columncolor{darkgreen}\centering}c">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Subsection
Colored Lines
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0" special="Wc">
<column alignment="center" valignment="top" width="0" special="Wc">
<column alignment="center" valignment="top" width="0" special="WcW">
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0" special="Wc">
<column alignment="center" valignment="top" width="0" special="Wc">
<column alignment="center" valignment="top" width="0" special="WcW">
\begin_layout Section
Table Customization
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="1">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="1">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="1">
-<features>
+<features tabularvalignment="middle">
<column alignment="left" valignment="top" width="0">
<row>
<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="1">
-<features>
+<features tabularvalignment="middle">
<column alignment="left" valignment="top" width="0">
<row>
<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_layout Subsection
Special Cell Alignment
-\begin_inset Index
+\begin_inset CommandInset label
+LatexCommand label
+name "sub:Special-Cell-Alignment"
+
+\end_inset
+
+
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Table-cells-of"
+reference "tab:Table-cells-align"
\end_inset
.
+ This alignment is achieved by setting the cursor into the column and then
+ either pressing the toolbar button
+\begin_inset Graphics
+ filename ../images/tabular-feature_align-decimal.png
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+
+ or setting the alignment in the table settings to
+\family sans
+At
+\begin_inset space ~
+\end_inset
+
+Decimal
+\begin_inset space ~
+\end_inset
+
+Separator
+\family default
+.
+ The alignment character can be a character of your choice and is specified
+ in the table settings.
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Table-cells-of"
+name "tab:Table-cells-align"
\end_inset
\end_inset
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="1">
+<features booktabs="true" tabularvalignment="middle">
+<column alignment="decimal" decimal_point="." valignment="top" width="0pt">
+<row>
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+heading
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+12.6
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+0.68
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+-123.0
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float table
+placement h
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Table-align-operator"
+
+\end_inset
+
+Table cells of a column aligned with the operators.
+\end_layout
+
+\end_inset
+
+
\end_layout
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="2">
-<features>
-<column alignment="right" valignment="top" width="0">
-<column alignment="left" valignment="top" width="0" special="@{}l">
+<features booktabs="true" tabularvalignment="middle">
+<column alignment="right" valignment="top" width="0pt">
+<column alignment="left" valignment="top" width="0pt" special="@{}l">
<row>
<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none">
\begin_inset Text
\begin_inset Text
\begin_layout Plain Layout
-12.
+\begin_inset Formula $12\,+$
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-6
+\begin_inset Formula $\,6$
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-0.
+\begin_inset Formula $0\,-$
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-68
+\begin_inset Formula $\,68$
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
--123.
+\begin_inset Formula $-123\,/$
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-0
+\begin_inset Formula $\,0$
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-This table was created with a 4×2 table.
+For alignments at characters in formulas this method does not work because
+ the field to specify the alignment character does not allow formulas.
+ In this case one need to use the method from Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-align-operator"
+
+\end_inset
+
+.
+ This table was created with a 4×2 table.
The heading is a centered multicolumn.
- The first column is right-aligned and contains the digits before the decimal
- point and the decimal point.
- The second column is left aligned and contains the digits after the decimal
- point.
+ The first column is right-aligned and contains the first part including
+ the operator.
+ The second column is left aligned and contains the rest.
+ A small space was added at the beginning of each cell of the second column
+ to get the space that is usually around operators.
To omit the space that is normally between two table columns, the following
LaTeX-argument was used for the second column:
\end_layout
\end_inset
shows some example alignments.
- For the alignment with the relation sign, you must add the second smallest
- math-space at the beginning of the last column to get the correct space
- surrounding the relation sign.
+ For the alignment with the relation sign, a small space was added like
+ for the second column of Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-align-operator"
+
+\end_inset
+
+.
\end_layout
\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="6">
-<features>
+<features tabularvalignment="middle">
<column alignment="right" valignment="top" width="0">
<column alignment="left" valignment="top" width="0" special="@{}l">
<column alignment="right" valignment="top" width="0">
\end_inset
-\end_layout
-
-\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-There is also the LaTeX-package
-\series bold
-dcolumn
-\series default
-
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-LaTeX-packages ! dcolumn
-\end_layout
-
-\end_inset
-
- that provides table cell alignments.
- But this unfortunately treats the cell entries as math and does not allow
- formulas in table cells: The first column of Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Several-table-cell"
-
-\end_inset
-
- will look with
-\series bold
-dcolumn
-\series default
- like the first column in Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Alignments-when"
-
-\end_inset
-
- and only with some tricks as you would want.
- The alignment of the second and third column of Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Several-table-cell"
-
-\end_inset
-
- is not possible with
-\series bold
-dcolumn
-\series default
-.
-\end_layout
-
-\begin_layout Standard
-\begin_inset Newpage newpage
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Alignments-when"
-
-\end_inset
-
-Alignments when LaTeX-package dcolumn is used.
- For all column alignments tricks have to be used to get the output.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="4" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0" special="D{x}{\times}{-1}">
-<column alignment="center" valignment="top" width="0" special="D{x}{\times}{4.9}">
-<column alignment="center" valignment="top" width="0" special="D{+}{\,}{9.7}">
-<row>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-units
-\end_layout
-
-\end_inset
-</cell>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-units
-\end_layout
-
-\end_inset
-</cell>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-units
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-12x24
-\begin_inset space \thinspace{}
-\end_inset
-
-bottles
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-12x24
-\begin_inset space \thinspace{}
-\end_inset
-
-
-\begin_inset Formula $\mbox{bottles}$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-12
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-times
-\end_layout
-
-\end_inset
-
-24+
-\begin_inset Formula $\mbox{bottles}$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-1024x768
-\begin_inset space \thinspace{}
-\end_inset
-
-Pixels
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-1024x768
-\begin_inset space \thinspace{}
-\end_inset
-
-
-\begin_inset Formula $\mbox{Pixels}$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-1024
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-times
-\end_layout
-
-\end_inset
-
-768+
-\begin_inset Formula $\mbox{Pixels}$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-32x6
-\begin_inset space \thinspace{}
-\end_inset
-
-cm
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-32x6
-\begin_inset space \thinspace{}
-\end_inset
-
-
-\begin_inset Formula $\mbox{cm}$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-32
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-times
-\end_layout
-
-\end_inset
-
-6+
-\begin_inset Formula $\mbox{cm}$
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-</row>
-</lyxtabular>
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
\end_layout
\begin_layout Subsection
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
-
-\backslash
-phantom{
-\end_layout
-
-\end_inset
-
+\series bold
\backslash
newcolumntype
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="4">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="middle" width="2.5cm" special="M{2.5cm}">
<column alignment="center" valignment="middle" width="0" special="S{2.5cm}{2}">
<column alignment="center" valignment="middle" width="0">
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0" special="Vc">
<column alignment="center" valignment="top" width="0" special="Vc">
<column alignment="center" valignment="top" width="0" special="VcV">
\begin_layout Subsection
Dashed Lines
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="5" columns="5">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0" special=":c">
arydshln
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
colortbl
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Chapter
Floats
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Algorithm Floats
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Wrap Floats
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
wrapfig
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Section
Float Numbering
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_inset space ~
\end_inset
-reference: prints a self defined cross-reference format.
+reference: prints a self-defined cross-reference format.
\begin_inset Newline newline
\end_inset
This feature is only available when you have the LaTeX-package
\series bold
prettyref
+\series default
+ or
+\series bold
+refstyle
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
LaTeX-packages ! prettyref
\end_layout
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! refstyle
+\end_layout
+
\end_inset
installed.
\end_inset
+\begin_inset Newline newline
+\end_inset
+
+You can select which LaTeX-package should be used for this feature by setting
+ the option
+\family sans
+Use refstyle (not prettyref) for cross-references
+\family default
+ in the menu
+\family sans
+Document\SpecialChar \menuseparator
+Settings\SpecialChar \menuseparator
+Document Class
+\family default
+.
+ The format is specified by adding the command
+\series bold
+
+\backslash
+newrefformat
+\series default
+ (prettyref) or
+\series bold
+
+\backslash
+newref
+\series default
+ (refstyle) to the preamble of the document.
+ For example redefining all references to figures (which have the label
+ shortcut
+\begin_inset Quotes eld
+\end_inset
+
+
+\family sans
+fig
+\family default
+
+\begin_inset Quotes erd
+\end_inset
+
+) can be done with this command
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
+
+\backslash
+newref{fig}{refcmd={Image on page
+\backslash
+pageref{#1}}}
+\series default
+
+\begin_inset Newline newline
+\end_inset
+
+For more information about the format, have a look at the package documentations
+,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "prettyref,refstyle"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+Textual
+\begin_inset space ~
+\end_inset
+
+reference: prints the caption of the reference:
+\begin_inset CommandInset ref
+LatexCommand nameref
+reference "fig:Two-distorted-images"
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
\series bold
Note:
\series default
- The LaTeX-package
+ It is recommended to use the LaTeX-package
+\series bold
+refstyle
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+LaTeX-packages ! refstyle
+\end_layout
+
+\end_inset
+
+ because
\series bold
prettyref
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
and is not internationalized.
- To find out how to tell
-\series bold
-prettyref
-\series default
- new shortcuts and translations, have a look at its documentation
-\begin_inset CommandInset citation
-LatexCommand cite
-key "prettyref"
-
-\end_inset
-
-.
\end_layout
\end_inset
\begin_layout Subsection
Automatic Reference Naming
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
hyperref
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
hyperref
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
hypcap
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
oberdiek
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
endfloat
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="1" columns="5">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Section
Subfloats
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="1" columns="5">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="1" columns="5">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="1" columns="4">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="1" columns="5">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Section
Floats Side by Side
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
has_inner_box 1
inner_pos "t"
use_parbox 0
+use_makebox 0
width "45col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "t"
use_parbox 0
+use_makebox 0
width "45col%"
special "none"
height "1in"
\begin_layout Section
Caption Formatting
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
caption
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
\backslash
-hphantom{
-\backslash
-
-\backslash
-captionsetup[figure]
-\backslash
-{}
+captionsetup[figure]{
\end_layout
\end_inset
- labelsep=period}
+labelsep=period}
\begin_inset Newline newline
\end_inset
KOMA-Script
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
document class is used.
In this case the document class option
\series bold
-tablecaptionabove
+captions=tableheading
\series default
must be used.
\end_layout
KOMA-Script
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="1" columns="5">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Section
Caption Placement
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
KOMA-Script
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\series default
package set the document class option
\series bold
-tablecaptionabove
+captions=tableheading
\series default
.
\end_layout
sidecap
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
+\noindent
+\begin_inset CommandInset line
+LatexCommand rule
+offset "0.5ex"
+width "100line%"
+height "1pt"
+
+\end_inset
-\lyxline
\end_layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_layout
\begin_layout Standard
+\noindent
+\begin_inset CommandInset line
+LatexCommand rule
+offset "0.5ex"
+width "100line%"
+height "1pt"
+
+\end_inset
-\lyxline
\end_layout
hypcap
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="5">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_layout Section
Listings of Floats
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Section
LyX Notes
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="2" columns="1">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
has_inner_box 1
inner_pos "t"
use_parbox 0
+use_makebox 0
width "100col%"
special "none"
height "1in"
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Footnote Placement
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
ftnright
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
.
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
footmisc
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Section
Margin Notes
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
marginnote
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\begin_layout Section
Introduction
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-, to prevent words to be hyphenated, see section
+, to prevent words from being hyphenated, see section
\begin_inset space ~
\end_inset
\end_inset
will be inserted.
- The box type can be specified by right-clicking on the box.
- The appearing box dialog offers the
+ The box type can be specified by right-clicking on the box and selecting
+
+\family sans
+Settings
+\family default
+.
+ The box dialog offers the
\family sans
Inner
\begin_inset space ~
\family default
types
\family sans
+Makebox
+\family default
+,
+\family sans
Parbox
\family default
and
LatexCommand ref
reference "sec:Parboxes"
+\end_inset
+
+ and the type
+\family sans
+Makebox
+\family default
+ in
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Prevent-Hyphenation"
+
\end_inset
.
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Size
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "20col%"
special "none"
height "2in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "20col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1in"
\begin_layout Subsection
Alignment
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "t"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1.5in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1.5in"
has_inner_box 1
inner_pos "b"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1.5in"
has_inner_box 1
inner_pos "s"
use_parbox 0
+use_makebox 0
width "12col%"
special "none"
height "1.5in"
has_inner_box 1
inner_pos "s"
use_parbox 0
+use_makebox 0
width "15col%"
special "none"
height "1.25in"
has_inner_box 0
inner_pos "s"
use_parbox 0
+use_makebox 0
width "90col%"
special "none"
height "1.25in"
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
The following types are possible:
\end_layout
+\begin_layout Description
+No
+\begin_inset space ~
+\end_inset
+
+frame Nothing is drawn.
+\end_layout
+
\begin_layout Description
Simple
\begin_inset space ~
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "20col%"
special "none"
height "1in"
\end_inset
-\end_layout
-
-\begin_layout Description
-Allow
-\begin_inset space ~
-\end_inset
-
-page
-\begin_inset space ~
-\end_inset
-
-break When you use the decoration
-\family sans
-simple rectangular frame
-\family default
- and no inner box, you can allow page breaks within a box.
- Note that then, in contrary to other framed boxes, the frame always uses
- the whole column width, the box is set as its own paragraph, and
-\series bold
-
-\backslash
-fboxrule
-\series default
- and
-\series bold
-
-\backslash
-fboxsep
-\series default
- have no effect on this box type.
- The frame line thickness has the size of
-\series bold
-
-\backslash
-FrameRule
-\series default
-.
-
-\begin_inset Box Framed
-position "t"
-hor_pos "c"
-has_inner_box 0
-inner_pos "t"
-use_parbox 0
-width "100col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
-
-\begin_layout Plain Layout
-Allow page break box
-\end_layout
-
-\end_inset
-
-
\end_layout
\begin_layout Description
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "20col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "20col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "20col%"
special "none"
height "1in"
\begin_inset space ~
\end_inset
-background This draws a box with red background color.
- In contrary to colored boxes
+background This draws a box with a red background.
+ Unlike colored boxes
\begin_inset Foot
status collapsed
has_inner_box 0
inner_pos "t"
use_parbox 0
+use_makebox 0
width "50col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "20col%"
special "none"
height "1in"
fancybox
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
must be installed.
\end_layout
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+When you use the decoration
+\family sans
+simple rectangular frame
+\family default
+ and no inner box, you can allow page breaks within a box.
+ Note that then, unlike other framed boxes, the frame always uses the whole
+ column width, the box is set as its own paragraph, and
+\series bold
+
+\backslash
+fboxrule
+\series default
+ and
+\series bold
+
+\backslash
+fboxsep
+\series default
+ have no effect on this box type.
+ The frame line thickness has the size of
+\series bold
+
+\backslash
+FrameRule
+\series default
+.
+
+\begin_inset Box Framed
+position "t"
+hor_pos "c"
+has_inner_box 0
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "100col%"
+special "none"
+height "1in"
+height_special "totalheight"
+status collapsed
+
+\begin_layout Plain Layout
+Allow page break box
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
\begin_layout Section
Box Customization
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "25col%"
special "none"
height "1in"
\begin_inset space \thinspace{}
\end_inset
-pt, like for the following box:
+pt, as with the following box:
\end_layout
\begin_layout Standard
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "25col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "25col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "25col%"
special "none"
height "1in"
has_inner_box 0
inner_pos "t"
use_parbox 0
+use_makebox 0
width "100col%"
special "none"
height "1in"
has_inner_box 0
inner_pos "t"
use_parbox 0
+use_makebox 0
width "100col%"
special "none"
height "1in"
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "45col%"
special "none"
height "1in"
has_inner_box 1
inner_pos "c"
use_parbox 0
+use_makebox 0
width "45col%"
special "none"
height "1in"
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
Parboxes are very similar to minipages with the difference that they cannot
have footnotes.
- The main difference to minipages is that minipages are in contrary to parboxes
- no real boxes but LaTeX-environments.
\end_layout
\begin_layout Standard
has_inner_box 1
inner_pos "t"
use_parbox 1
+use_makebox 0
width "33col%"
special "none"
height "1in"
\begin_layout Section
Boxes for Words and Characters
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-You can use a special kind of boxes to prevent words or text to be hyphenated.
+You can use the box type
+\family sans
+Makebox
+\family default
+ to prevent words or text from being hyphenated.
\begin_inset Newline newline
\end_inset
\begin_inset Quotes erd
\end_inset
-, add the command
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-mbox{
-\end_layout
-
-\begin_layout Standard
-in TeX-Code before the word.
- Behind the word insert a closing brace
-\begin_inset Quotes eld
+, put the word into a box, set the
+\family sans
+Inner
+\begin_inset space ~
\end_inset
-
-\series bold
-}
-\series default
-
-\begin_inset Quotes erd
+box
+\family default
+ to
+\family sans
+Makebox
+\family default
+ and its width to 1
+\begin_inset space \thinspace{}
\end_inset
- in TeX-Code.
+Width.
\end_layout
\begin_layout Standard
\begin_layout Standard
This line is an example to show how you can prevent the hyphenation of
-\begin_inset ERT
-status collapsed
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 1
+width "1in"
+special "width"
+height "1in"
+height_special "totalheight"
+status open
\begin_layout Plain Layout
-
-
-\backslash
-mbox{
-\end_layout
-
-\end_inset
-
-
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-.
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-}
\end_layout
\end_inset
-
+.
\end_layout
\begin_layout Standard
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 1
+width "1in"
+special "width"
+height "1in"
+height_special "totalheight"
+status open
\begin_layout Plain Layout
-
-
-\backslash
-mbox{
-\end_layout
-
-\end_inset
-
-
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-.
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-}
\end_layout
\end_inset
-
+.
\end_layout
\begin_layout Subsection
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\backslash
raisebox
\series default
- you can align words, characters or other boxes vertically to the surrounding
- text.
+ you can align words, characters or other boxes vertically relative to the
+ surrounding text.
\series bold
\begin_layout Standard
in TeX-Code before the word.
- Behind the word insert a closing brace
+ After the word insert a closing brace
\begin_inset Quotes eld
\end_inset
\end_inset
- as raised word.
+ as a raised word.
\end_layout
\begin_layout Standard
\end_inset
- as lowered word.
+ as a lowered word.
\begin_inset Newline newline
\end_inset
\end_inset
- as raised word.
+ as a raised word.
\end_layout
\begin_layout Standard
\end_inset
- as lowered word.
+ as a lowered word.
\begin_inset Newline newline
\end_inset
\end_inset
- as raised word.
+ as a raised word.
\end_layout
\begin_layout Section
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Color for Text
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
color
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\series bold
color
\series default
- will be loaded automatically by LyX when you color text
+ will be loaded automatically by LyX when you color text.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-To avoid that it is loaded twice the command
+To avoid it being loaded twice the command
\series bold
\backslash
\end_inset
-.
+
\end_layout
\begin_layout Standard
\begin_layout Standard
before the word in TeX-Code.
- Behind the word insert a closing brace
+ After the word insert a closing brace
\begin_inset Quotes eld
\end_inset
\begin_inset VSpace bigskip
\end_inset
-If you would have the box frame in a different color, you can use the command
+If you would like the box frame in a different color, you can use the command
\series bold
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
in TeX-Code.
- Behind the minipage insert a closing brace
+ After the minipage insert a closing brace
\begin_inset Quotes eld
\end_inset
has_inner_box 1
inner_pos "t"
use_parbox 0
+use_makebox 0
width "100col%"
special "none"
height "1in"
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
graphicx
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
+\end_inset
+
-\backslash
-hphantom{ }
\end_layout
\end_inset
\begin_layout Subsection
Rotated Boxes
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\emph on
t
\emph default
- (top), and also expedient combinations of the four base positions.
+ (top), along with meaningful combinations of the four base positions.
For example
\emph on
lt
\emph default
- means, that the rotation origin is at the top left corner of the box.
+ means that the rotation origin is at the top left corner of the box.
When no rotation origin is specified, the position
\emph on
l
has_inner_box 0
inner_pos "c"
use_parbox 0
+use_makebox 0
width "1in"
special "width"
height "1in"
\begin_inset Tabular
<lyxtabular version="3" rows="2" columns="2">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<row>
\begin_layout Subsection
Scaled Boxes
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
Horizontal and vertical are the corresponding scaling factors.
If no vertical scaling factor is given, the horizontal factor will also
- be used as vertical one.
+ be used as the vertical one.
\end_layout
\begin_layout Standard
\end_inset
-, compared to the document text size.
+, compared with the document text size.
\end_layout
\begin_layout Standard
\backslash
scalebox{2}[1]{Hello}
\series default
- in contrary distorts the
+ on the other hand distorts the
\begin_inset ERT
status collapsed
\end_layout
\begin_layout Standard
-If a the scaling factor is negative, the box content will be mirrored.
+If the scaling factor is negative, the box content will be mirrored.
Therefore the command
\series bold
\end_layout
\begin_layout Standard
-Is one of the two command arguments given as exclamation mark
+If one of the two command arguments given is an exclamation mark
\series bold
!
\series default
\begin_inset Tabular
<lyxtabular version="3" rows="2" columns="2">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<row>
\end_inset
-, also display formulas can be scaled.
+, display style formulas can also be scaled.
\end_layout
\begin_layout Chapter
External Document Parts
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_inset space ~
\end_inset
-Text A text document; every of its text lines is inserted to your document
- as own paragraph.
+Text A text document; each line is inserted in your document as a separate
+ paragraph.
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-Lines A text document; its text lines are inserted as they are.
- Empty text lines creates a new paragraph in your document.
+Lines A text document; text lines are inserted in your document continuously
+ but an empty text line creates a new paragraph.
\end_layout
\begin_layout Description
\begin_layout Section
External Material
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-The external material feature allows you to insert files to your document
- without converting them previously to a format that can be read by the
- document output format because LyX takes care of needed conversions.
+The external material feature allows you to insert files in to your document
+ without converting them to a format that can be read by the document output
+ format.
+ LyX takes care of the necessary conversions.
This is similar to images that can be inserted in various image formats
- to LyX documents.
+ in LyX documents.
When you have enabled Instant Preview in LyX's preferences under
\family sans
Look
feel\SpecialChar \menuseparator
Graphics
\family default
-, the external material types Dia and Xfig is directly shown in LyX.
+, the external material types Dia and Xfig are directly shown in LyX.
\end_layout
\begin_layout Standard
\end_inset
.
- The difference is that only raster images are allowed, that means that
+ The difference is that only raster images are allowed; that means that
PDF and EPS-images are not supported.
\end_layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="4">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
\begin_inset Newline newline
\end_inset
-External material is displayed in LyX either as box like this:
+External material is displayed in LyX either as a box like this:
\begin_inset Graphics
filename clipart/ExternalMaterialQt4.png
scale 85
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-Child documents are used when you have a long document consisting of several
+Child documents are used if you have a long document consisting of several
larger parts or sections.
For maintenance it is often useful and sometimes even required to split
- the document in several files that can be revised separately.
- The different documents are then the so called child documents and a master
- document connects them to print the full document or parts of it.
- A child documents inherits contents of its master, for example the LaTeX
+ the document into several files that can be revised separately.
+ The different documents are then the so called
+\begin_inset Quotes eld
+\end_inset
+
+child documents
+\begin_inset Quotes erd
+\end_inset
+
+, and a master document connects them to print the full document or parts
+ of it.
+ A child document inherits elements of its master, for example the LaTeX
preamble, the bibliography, and labels for cross-references.
\end_layout
\begin_layout Standard
-To be able to work on child documents without the need to open its master,
+To be able to work on child documents without the need to open their master,
specify in the child document the master in the menu
\family sans
Document\SpecialChar \menuseparator
\end_inset
- To include child documents to a master document use the menu
+ To include child documents in a master document use the menu
\family sans
Insert\SpecialChar \menuseparator
File\SpecialChar \menuseparator
\end_layout
\begin_layout Description
-Include You can include LyX and LaTeX-documents.
+Include You can include LyX- and LaTeX-documents.
When you press the
\family sans
Load
Child Document
\family default
dialog, the included documents will be opened in LyX in a new file tab
- so that you can modify it.
+ so that you can modify them.
\begin_inset Newline newline
\end_inset
The section numbering includes the sections of the included files in the
order they are inserted in the master document.
The included example document has for example a subsection that is numbered
- as subsection of this section.
+ as a subsection of this section.
Labels of included documents can be referenced: Subsection
\begin_inset space ~
\end_inset
\end_inset
-
+.
\end_layout
\begin_layout Standard
-The preamble of the child document is ignored, only the preamble of the
+The preamble of the child document is ignored; only the preamble of the
master document is used.
Branches in child documents will be ignored by the master document when
the master document does not have a branch with the same name.
- Included documents are inserted starting on a new page and end with a page
- break.
-\end_layout
-
-\begin_layout Standard
-In case you are only working on a certain chapter of a large document and
- want to save compiling time, you can put each included file into a branch.
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-Branches are described in section
-\emph on
-Branches
-\emph default
- of the LyX
-\emph on
-Userguide
-\emph default
-.
-\end_layout
-
-\end_inset
-
- By enabling/disabling branches you can decide what included files will
- appear in the output.
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
-
-\begin_layout Plain Layout
-
-\series bold
-Note:
-\series default
- Due to a bug in LyX the LaTeX command
-\series bold
-
-\backslash
-includeonly
-\series default
- can currently not be used as alternative to decide what files should be
- included.
-\end_layout
-
-\end_inset
-
-
+ Included documents are inserted starting on a new page and ending with
+ a page break.
\end_layout
\begin_layout Standard
\series bold
Note:
\series default
- When you have included a LyX- or LaTeX-file, you are warned when you export/vie
-w the document in case that the child document uses another document class
- than the master document as this will lead to unexpected outputs.
+ If you have included a LyX- or LaTeX-file, you are warned when you export/view
+ the document in case the child document uses another document class than
+ the master document as this will lead to unexpected outputs.
\end_layout
\end_inset
\end_layout
\begin_layout Itemize
-The LaTeX-command
-\series bold
-
-\backslash
-includeonly
-\series default
- cannot be used.
+You cannot exclude Input files via the menu
+\family sans
+Document\SpecialChar \menuseparator
+Settings\SpecialChar \menuseparator
+Child Documents
+\family default
+.
\end_layout
\end_deeper
\end_layout
\begin_layout Description
-Verbatim With this method every text file can be included.
- The file is shown in the output with its source code, no command used in
+Verbatim With this method any text file can be included.
+ The file is shown in the output with its source code; no command used in
the text is invoked.
You can use the option
\family sans
\end_inset
for every space character in the source code.
- The difference to the method via the menu
+ The difference from the method via the menu
\family sans
Insert\SpecialChar \menuseparator
File\SpecialChar \menuseparator
\begin_inset VSpace bigskip
\end_inset
-Here is a child document inserted as Verbatim using the
+ Here is a child document inserted as Verbatim using the
\family sans
Mark spaces in output
\family default
\end_layout
+\begin_layout Standard
+If you want to view/export only selected children of your master document,
+ either because you want to save compiling time or because you want to distribut
+e single chapters of the book you are just writing, you can exclude children
+ from the output.
+ This is done via the menu
+\family sans
+Document\SpecialChar \menuseparator
+Settings\SpecialChar \menuseparator
+Child Documents
+\family default
+.
+ You can exclude\SpecialChar \slash{}
+include children by double-clicking on the
+\family sans
+include to output
+\family default
+ column of the respective child document in the list (note that this only
+ works for documents embedded via
+\begin_inset Quotes eld
+\end_inset
+
+Include
+\begin_inset Quotes erd
+\end_inset
+
+, not with
+\begin_inset Quotes eld
+\end_inset
+
+Input
+\begin_inset Quotes erd
+\end_inset
+
+).
+ If the option
+\family sans
+Maintain counters and references
+\family default
+ is enabled, LyX will assure that all page numbers, references etc.
+\begin_inset space ~
+\end_inset
+
+are correct as if the whole document was processed.
+ This is useful if you want the selected sub-documents to look exactly as
+ in the context of the whole document.
+ However, LyX needs to process the whole document in the background for
+ this feature.
+ So if you want to save compile time and if counters and references do not
+ need to be correct, disable this checkbox.
+\end_layout
+
+\begin_layout Standard
+Alternatively, you can put each included file into a branch.
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+Branches are described in section
+\emph on
+Branches
+\emph default
+ of the LyX
+\emph on
+Userguide
+\emph default
+.
+\end_layout
+
+\end_inset
+
+ By enabling\SpecialChar \slash{}
+disabling branches you can decide which included files will
+ appear in the output.
+ This has the advantage that it also works with Input'ed sub-documents.
+ However, counters and references will not be maintained with this approach.
+\end_layout
+
\begin_layout Chapter
Program Code Listings
\begin_inset CommandInset label
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
listings
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
- provides a powerful and flexible way to insert program source code to your
- document.
+ provides a powerful and flexible way to insert program source code into
+ your document.
\end_layout
\begin_layout Standard
numbering
\family default
of the listings dialog you can specify the line numbering style.
- You can insert a number to specify which lines are numbered to the field
+ You can insert a number to specify which lines are numbered in the field
\family sans
Step
\end_layout
\begin_layout Standard
-You can furthermore specify a range of lines, only these will then appear
+You can furthermore specify a range of lines; only these will then appear
in the output.
The option
\family sans
\end_inset
+\end_layout
+
+\begin_layout Standard
+Inserting a formula into a listing can be done the following way:
+\end_layout
+
+\begin_layout Enumerate
+Open the listings dialog and add
+\begin_inset Newline newline
+\end_inset
+
+
+\family sans
+mathescape=true
+\family default
+
+\begin_inset Newline newline
+\end_inset
+
+to the field of the
+\family sans
+Advanced
+\family default
+ tab.
+\end_layout
+
+\begin_layout Enumerate
+Create a formula outside the listing
+\end_layout
+
+\begin_layout Enumerate
+Copy the content of the formula (not the formula inset) to the clipboard
+ (shortcut
+\begin_inset Info
+type "shortcut"
+arg "copy"
+\end_inset
+
+)
+\end_layout
+
+\begin_layout Enumerate
+In the listing write
+\begin_inset Quotes eld
+\end_inset
+
+
+\family sans
+$$
+\family default
+
+\begin_inset Quotes erd
+\end_inset
+
+ and copy from the clipboard between the dollar-signs (shortcut
+\begin_inset Info
+type "shortcut"
+arg "paste"
+\end_inset
+
+)
+\end_layout
+
+\begin_layout Standard
+\begin_inset listings
+lstparams "language=Python,mathescape=true"
+inline false
+status open
+
+\begin_layout Plain Layout
+
+\begin_inset Caption
+
+\begin_layout Plain Layout
+Example Listing float containing a formula
+\end_layout
+
+\end_inset
+
+# Example listing float
+\end_layout
+
+\begin_layout Plain Layout
+
+def func(param):
+\end_layout
+
+\begin_layout Plain Layout
+
+ # $
+\backslash
+prod_{n=1}^{
+\backslash
+infty}
+\backslash
+,
+\backslash
+frac{1}{x^{2}}$
+\end_layout
+
+\begin_layout Plain Layout
+
+ pass
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
\end_layout
\begin_layout Standard
\family sans
Document\SpecialChar \menuseparator
Settings\SpecialChar \menuseparator
-Text Layout
+Listings
\family default
dialog.
To get there a list of available options, type in a question mark
\begin_inset Quotes erd
\end_inset
- in the
-\family sans
-Listings
-\begin_inset space ~
-\end_inset
-
-settings
-\family default
- field.
+.
\end_layout
\begin_layout Standard
\begin_layout Chapter
\start_of_appendix
Units available in LyX
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="20" columns="2">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" width="0">
<row>
\begin_layout Section
DVI
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\series bold
Note:
\series default
- DVI-files doesn't contain images, they will only be a linked.
+ DVI-files do not contain images; they will only be a linked.
\end_layout
\end_inset
.dvi
\family default
file to another computer.
- This property can also slow down your computer when you view the DVI.
- Because the DVI-viewer has to convert the image in the background to make
- it visible when you scroll in the DVI.
- So we recommend to use PDF for files with many images.
+ This property can also slow down your computer when you view the DVI, because
+ the DVI-viewer has to convert the image in the background to make it visible
+ when you scroll in the DVI.
+ So it is recommended that you use PDF for files with many images.
\end_layout
\begin_layout Standard
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\family typewriter
Adobe
\family default
- as printer language.
- The file contains therefore commands that the printer uses to print the
+ as a printer language.
+ The file therefore contains commands that the printer uses to print the
file.
- PostScript can be seen as
+ PostScript can be seen as a
\begin_inset Quotes eld
\end_inset
).
As LyX allows you to use any known image format in your document, it has
to convert images in the background to EPS.
- If you have e.g 50 images in your document, LyX has to do 50 conversions
- whenever you view or export your document.
+ If you have e.g.
+\begin_inset space ~
+\end_inset
+
+50
+\begin_inset space ~
+\end_inset
+
+images in your document, LyX has to do 50
+\begin_inset space ~
+\end_inset
+
+conversions whenever you view or export your document.
This will slow down your work flow with LyX drastically.
So if you plan to use PostScript, you can insert your images directly as
EPS to avoid this problem.
\begin_layout Section
PDF
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_inset Quotes erd
\end_inset
- (PDF) is developed by
+ (PDF) was developed by
\family typewriter
Adobe
\family default
- as derivative from PostScript.
- It is more compressed and it uses much less commands than PostScript.
+ as a derivative of PostScript.
+ It is more compressed and it uses fewer commands than PostScript.
As the name
\begin_inset Quotes eld
\end_inset
in the background to one of these formats.
But as described in the section about PostScript, the image conversion
will slow down your work flow.
- So it is recommended to use images in one of the three mentioned formats.
+ So it is recommended that you use images in one of the three mentioned
+ formats.
\end_layout
\begin_layout Standard
dvips
\family default
which uses a DVI-version as intermediate step.
- So this export variant consist of three conversions.
+ So this export variant consists of three conversions.
\end_layout
\begin_layout Description
\end_layout
\begin_layout Standard
-It is recommended to use
+It is recommended that you use
\family sans
PDF
\begin_inset space ~
\family typewriter
pdftex
\family default
- supports all features of actual PDF-versions, is quick and works stable
- without problems.
+ supports all features of actual PDF-versions, is quick and works stable.
The program
\family typewriter
dvipdfm
\begin_inset space ~
\end_inset
-
+(
\begin_inset CommandInset ref
-LatexCommand eqref
+LatexCommand ref
reference "eq:Wgn"
\end_inset
-
+)
\begin_inset CommandInset label
LatexCommand label
name "cha:Explanation-of-Equation"
\end_layout
\begin_layout Standard
-The total width of
+We can calculate the total width of
\emph on
n
\emph default
\begin_inset Formula $W_{\mathrm{tot\, n}}$
\end_inset
- can be calculated to
+ as follows:
\end_layout
\begin_layout Standard
-\begin_inset Formula \begin{equation}
-W_{\mathrm{tot}\, n}=n\cdot(W_{g\, n}+2\cdot\backslash\mbox{tabcolsep})+(n+1)\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_n}\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{\mathrm{tot}\, n}=n\cdot(W_{g\, n}+2\cdot\backslash\mbox{tabcolsep})+(n+1)\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_n}
+\end{equation}
\end_inset
-
-\end_layout
-
-\begin_layout Standard
-Where
+where
\begin_inset Formula $W_{g\, n}$
\end_inset
- is the given width of all cells.
-
+ is the given width of all cells,
\series bold
\backslash
tabcolsep
\series default
- is the LaTeX-length between the cell text and the cell border, its default
+ is the LaTeX-length between the cell text and the cell border (its default
value is 6
\begin_inset space \thinspace{}
\end_inset
-pt.
+pt).
\series bold
\end_layout
\begin_layout Standard
-\begin_inset Formula \begin{equation}
-W_{\mathrm{tot\, mult}}=W_{g\,\mathrm{mult}}+2\cdot\backslash\mbox{tabcolsep}+2\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_mult}\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{\mathrm{tot\, mult}}=W_{g\,\mathrm{mult}}+2\cdot\backslash\mbox{tabcolsep}+2\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_mult}
+\end{equation}
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset Formula \begin{equation}
-W_{g\, n}=(W_{g\,\mathrm{mult}}+(1-n)\cdot(2\cdot\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}))/n\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{g\, n}=(W_{g\,\mathrm{mult}}+(1-n)\cdot(2\cdot\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}))/n
+\end{equation}
\end_inset
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "latexcompanion"
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "latexguide"
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "latexbook"
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "booktabs"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "caption"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "endfloat"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "wrapfig"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "footmisc"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "hypcap"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "hyperref"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "KOMA-Script"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "listings"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "marginnote"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "pstricks"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "sidecap"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "prettyref"
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Bibliography
+\labelwidthstring Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "NewInLyX16"
+key "refstyle"
\end_inset
+Documentation of the LaTeX-package
+\series bold
\begin_inset CommandInset href
LatexCommand href
-name "Wiki page"
-target "http://wiki.lyx.org/LyX/NewInLyX16"
+name "refstyle"
+target "http://www.ctan.org/tex-archive/macros/latex/contrib/refstyle/doc/latex/refstyle/refstyle.pdf"
\end_inset
- about new features in
-\family sans
-LyX 1.6.0
-\family default
-.
-\end_layout
-
-\begin_layout Standard
-\begin_inset CommandInset index_print
-LatexCommand printindex
-\end_inset
+\series default
+\begin_inset Index idx
+status collapsed
+\begin_layout Plain Layout
+LaTeX-packages ! refstyle
\end_layout
-\begin_layout Standard
-\begin_inset FloatList figure
-
\end_inset
\end_layout
-\begin_layout Standard
-\begin_inset FloatList table
+\begin_layout Bibliography
+\labelwidthstring Bibliography
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "NewInLyX20"
\end_inset
+\begin_inset CommandInset href
+LatexCommand href
+name "Wiki page"
+target "http://wiki.lyx.org/LyX/NewInLyX20"
+
+\end_inset
+
+ about new features in
+\family sans
+LyX 2.0
+\family default
+.
\end_layout
\begin_layout Standard
-\begin_inset FloatList algorithm
+\begin_inset CommandInset index_print
+LatexCommand printindex
+type "idx"
\end_inset
projects / lyx.git / blobdiff