-#LyX 1.6.6svn created this file. For more info see http://www.lyx.org/
-\lyxformat 345
+#LyX 2.2 created this file. For more info see http://www.lyx.org/
+\lyxformat 503
\begin_document
\begin_header
+\origin unavailable
\textclass scrbook
\begin_preamble
-% if pdflatex is used
-\usepackage{ifpdf}
-\ifpdf
-
-% set fonts for nicer pdf view
-\IfFileExists{lmodern.sty}
- {\usepackage{lmodern}}{}
-
-\fi % end if pdflatex is used
-
% that links to image floats jumps
% to the beginning of the float and
% not to its caption
\mainmatter }
% provides caption formatting
-\usepackage[labelfont={bf,sf}, tableposition=top]{caption}[2004/07/16]
+\usepackage[labelfont={bf,sf}]{caption}[2004/07/16]
% provides commands to set caption
% beside tables/images
-\usepackage{sidecap}
-
-\newcommand{\TabBesBeg}{%
+\newcommand{\TabBesBeg}[1][1.0]{%
\let\MyTable\table
\let\MyEndtable\endtable
- \renewenvironment{table}{\begin{SCtable}}{\end{SCtable}}}
+ \renewenvironment{table}[1]{\begin{SCtable}[#1]##1}{\end{SCtable}}}
\newcommand{\TabBesEnd}{%
\let\table\MyTable
\let\endtable\MyEndtable}
-\newcommand{\FigBesBeg}{%
+\newcommand{\FigBesBeg}[1][1.0]{%
\let\MyFigure\figure
\let\MyEndfigure\endfigure
- \renewenvironment{figure}{\begin{SCfigure}}{\end{SCfigure}}}
+ \renewenvironment{figure}[1]{\begin{SCfigure}[#1]##1}{\end{SCfigure}}}
\newcommand{\FigBesEnd}{%
\let\figure\MyFigure
% enables calculation of values,
\usepackage{calc}
-% provides special table cell alignments
-\usepackage{dcolumn}
-
% increase the bottom float placement fraction
\renewcommand{\bottomfraction}{0.5}
% speed up the longtable calculation
\setcounter{LTchunksize}{100}
-% used for scaled and rotated boxes
-\@ifundefined{rotatebox}{\usepackage{graphicx}}{}
-
% used for colored tables
\@ifundefined{textcolor}
{\usepackage{color}}{}
\setboolean{colortbl}{true}}
{\setboolean{colortbl}{false}}
-% used for multirows
-\usepackage{multirow}
-%\renewcommand{\multirowsetup}{\centering}
-
-% used for book-style tables
-\usepackage{booktabs}
-
% used to have extra space in table cells
\@ifundefined{extrarowheight}
{\usepackage{array}}{}
% number algorithm floats within chapters
\numberwithin{algorithm}{chapter}
-% redefine the greyed out note
-\renewenvironment{lyxgreyedout}
- {\textcolor{blue}\bgroup}{\egroup}
-
% ------------------------------------
% used to check for needed LaTeX packages
\usepackage{ifthen}
\setboolean{sidecap}{true}}
{\setboolean{sidecap}{false}}
-% redefine the \LyX macro for PDF bookmarks
-\def\LyX{\texorpdfstring{%
- L\kern-.1667em\lower.25em\hbox{Y}\kern-.125emX\@}
- {LyX}}
+% check for picinpar
+% used for surrounded fixed objects
+\newboolean{picinpar}
+\IfFileExists{picinpar.sty}
+ {\usepackage{picinpar}
+ \setboolean{picinpar}{true}}
+ {\setboolean{picinpar}{false}}
+
+% check for lettrine
+\newboolean{lettrine}
+\IfFileExists{lettrine.sty}
+ {\usepackage{lettrine}
+ \setboolean{lettrine}{true}}
+ {\setboolean{lettrine}{false}}
+
+% check for diagbox
+\newboolean{diagbox}
+\IfFileExists{diagbox.sty}
+ {\usepackage{diagbox}
+ \setboolean{diagbox}{true}}
+ {\setboolean{diagbox}{false}}
\end_preamble
-\options fleqn,liststotoc,bibtotoc,idxtotoc,BCOR7.5mm,titlepage,tablecaptionabove
+\options bibliography=totoc,index=totoc,BCOR7.5mm,titlepage,captions=tableheading,usenames,dvipsnames,table
\use_default_options false
+\begin_modules
+initials
+graphicboxes
+\end_modules
+\maintain_unincluded_children false
\language english
+\language_package default
\inputencoding auto
-\font_roman default
-\font_sans default
-\font_typewriter default
+\fontencoding global
+\font_roman "lmodern" "default"
+\font_sans "lmss" "default"
+\font_typewriter "lmtt" "default"
+\font_math "auto" "auto"
\font_default_family default
+\use_non_tex_fonts false
\font_sc false
\font_osf false
-\font_sf_scale 100
-\font_tt_scale 100
-
+\font_sf_scale 100 100
+\font_tt_scale 100 100
\graphics default
+\default_output_format pdf2
+\output_sync 0
+\bibtex_command default
+\index_command default
\paperfontsize 12
\spacing single
\use_hyperref true
\pdf_colorlinks true
\pdf_backref false
\pdf_pdfusetitle false
-\pdf_quoted_options " linkcolor=black, citecolor=black, urlcolor=blue, filecolor=blue, pdfpagelayout=OneColumn, pdfnewwindow=true, pdfstartview=XYZ, plainpages=false"
+\pdf_quoted_options "linkcolor=black, citecolor=black, urlcolor=blue, filecolor=blue, pdfpagelayout=OneColumn, pdfnewwindow=true, pdfstartview=XYZ, plainpages=false"
\papersize default
\use_geometry false
-\use_amsmath 2
-\use_esint 0
+\use_package amsmath 2
+\use_package amssymb 2
+\use_package cancel 0
+\use_package esint 0
+\use_package mathdots 1
+\use_package mathtools 0
+\use_package mhchem 1
+\use_package stackrel 0
+\use_package stmaryrd 0
+\use_package undertilde 0
\cite_engine basic
+\cite_engine_type default
+\biblio_style plain
\use_bibtopic false
+\use_indices false
\paperorientation portrait
+\suppress_date false
+\justification true
+\use_refstyle 0
+\notefontcolor #0000ff
+\index Index
+\shortcut idx
+\color #008000
+\end_index
\secnumdepth 3
\tocdepth 3
\paragraph_separation skip
\papercolumns 1
\papersides 2
\paperpagestyle default
-\bullet 1 1 34 -1
-\bullet 2 2 35 -1
-\bullet 3 2 7 -1
\tracking_changes false
\output_changes false
-\author ""
-\author ""
+\html_math_output 0
+\html_css_as_file 0
+\html_be_strict false
\end_header
\begin_body
\begin_layout Title
-LyX's detailed Figure, Table, Floats, Notes, Boxes and External Material
- manual
+\SpecialChar LyX
+'s detailed Figure, Table, Floats, Notes, Boxes and External Material manual
\end_layout
\begin_layout Author
-by the LyX Team
+by the \SpecialChar LyX
+ Team
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
\noindent
-If you have comments or error corrections, please send them to the LyX Documenta
-tion mailing list:
+If you have comments or error corrections, please send them to the \SpecialChar LyX
+ Documentatio
+n mailing list:
\begin_inset CommandInset href
LatexCommand href
name "lyx-docs@lists.lyx.org"
\family sans
-Version 1.6.x
+Version 2.2.x
\end_layout
\begin_layout Standard
status open
\begin_layout Plain Layout
-To export all parts of this document to PDF, PS, or DVI the LaTeX-packages
-
+To export all parts of this document to PDF, PS, or DVI the \SpecialChar LaTeX
+-packages
\series bold
arydshln
\series default
\series default
,
\series bold
-marginnote
+diagbox, lettrine, marginnote, picinpar
\series default
-, and
+ and
\series bold
sidecap
\series default
\begin_layout Chapter
Figures
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Section
Graphics Dialog
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
To insert an image into your document, place the cursor at the text position
you want and click on the toolbar icon
-\begin_inset Graphics
- filename ../images/dialog-show-new-inset_graphics.png
- scale 85
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
\end_inset
or use the menu
\family sans
-Insert\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
Graphics
\family default
.
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
You can rotate images counter-clockwise by setting a rotation angle and
a rotation origin.
- The image will also be rotated inside LyX.
+ The image will also be rotated inside \SpecialChar LyX
+.
\begin_inset Newline newline
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
Images can be opened in a program of your choice by right-clicking on it
- choosing the entry
+ and choosing the entry
\family sans
Edit
\begin_inset space ~
externally
\family default
- in the appearing context menu.
+ in the context menu.
The program can be set for every image format in the file format settings
- in LyX's preferences.
+ in \SpecialChar LyX
+'s preferences.
\end_layout
\begin_layout Description
box
\family default
will only print the image region within the given coordinates.
- Normally you don't need to take care about image coordinates and can ignore
+ Normally you don't need to worry about image coordinates and can ignore
this tab.
\end_layout
options
\family default
- In this tab you can modify the appearance of the image within LyX and LaTeX
- experts can specify additional LaTeX options.
+ In this tab you can modify the appearance of the image within \SpecialChar LyX
+ and \SpecialChar LaTeX
+ experts
+ can specify additional \SpecialChar LaTeX
+ options.
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-The
+In the section
\family sans
-Don't
-\begin_inset space ~
-\end_inset
-
-unzip
-\begin_inset space ~
-\end_inset
-
-on
-\begin_inset space ~
-\end_inset
-
-export
-\family default
- option only affects zipped EPS-graphics, e.
-\begin_inset space \thinspace{}
-\end_inset
-
-g.
-\begin_inset space \space{}
-\end_inset
-
-
-\emph on
-x.eps.gz
-\emph default
-.
- When the option is used the images will not be unzipped on export, since
- LaTeX can handle them as they are.
-\begin_inset Newline newline
-\end_inset
-
-Zipped EPS-graphics are useful to save disk space when you choose PostScript
- as output format, see appendix
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:PostScript"
-
-\end_inset
-
-.
- To zip EPS-graphics, use the following commands in a UNIX-shell or a Windows
- console:
-\begin_inset Newline newline
-\end_inset
-
-
-\series bold
-gzip x.eps
-\series default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\series bold
-zgrep %%Bounding x.eps.gz > x.eps.bb
-\series default
-
-\begin_inset Newline newline
-\end_inset
-
-The second command creates the bounding box file
-\begin_inset Quotes eld
-\end_inset
-
-x.eps.bb
-\begin_inset Quotes erd
-\end_inset
-
- that is needed by LaTeX for zipped graphics.
-\begin_inset Newline newline
-\end_inset
-
-The field
-\family sans
-Initialize
+Graphics
\begin_inset space ~
\end_inset
Group
-\begin_inset space ~
-\end_inset
-
-Name
\family default
- allows you define or join an image settings group.
-\begin_inset Index
+ you can define or join an image settings group.
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
within a separate, horizontally centered paragraph:
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_layout Standard
\begin_layout Standard
This is the same image like the one above but in draft mode:
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_layout Standard
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
The toolbar button
-\begin_inset Graphics
- filename ../images/float-insert_figure.png
- scale 85
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "float-insert figure"
\end_inset
and the menu
\family sans
-Insert\SpecialChar \menuseparator
-Float\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
+Float\SpecialChar menuseparator
Figure
\family default
inserts a float with a caption that has the label
\end_inset
.
- More about the caption placement is described in section
+ More about caption placement is described in section
\begin_inset space ~
\end_inset
\end_layout
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
\end_layout
\begin_layout Standard
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
Figures can be referenced in the text by referencing their label.
To do this insert a label in the caption using the menu
\family sans
-Insert\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
Label
\family default
or the toolbar button
-\begin_inset Graphics
- filename ../images/label-insert.png
- scale 85
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "label-insert"
\end_inset
.
You can now refer to the label using the menu
\family sans
-Insert\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
Cross
\begin_inset space ~
\end_inset
reference
\family default
or the toolbar button
-\begin_inset Graphics
- filename ../images/dialog-show-new-inset_ref.png
- scale 85
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset ref"
\end_inset
.
\begin_inset Quotes erd
\end_inset
-, because as LaTeX will reposition the floats in the final document, it
- might not be
+, because \SpecialChar LaTeX
+ will reposition the floats in the final document and it might
+ not be
\begin_inset Quotes eld
\end_inset
status collapsed
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
status collapsed
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
\end_layout
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-, every output document format allows only a few image formats.
- LyX uses therefore the program
+, each output document format allows only a few image formats.
+ \SpecialChar LyX
+ uses therefore the program
\family typewriter
ImageMagick
\family default
in the background to convert the images to the right format.
To increase your work flow by avoiding these conversions in the background,
- you can use only the image formats that can directly be embedded in the
- output file format.
+ you could choose to use only the image formats that can directly be embedded
+ in the output file format.
The output file formats are explained in appendix
\begin_inset space ~
\end_inset
\end_inset
images consist of pixel values, often in a compressed form.
- They are therefore not fully scalable and look pixeled in large zooms.
+ They are therefore not fully scalable and look pixelated in large zooms.
Well-known bitmap image formats are
\begin_inset Quotes eld
\end_inset
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
)
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
, because you can convert any bitmap image to a PDF or EPS-image and the
result will still be a bitmap image.
- In this cases only a header with the image properties is added to the original
+ In such cases only a header with the image properties is added to the original
image
\begin_inset Foot
status collapsed
\begin_layout Chapter
Tables
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Section
Introduction
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
You can insert a table using either the toolbar button
-\begin_inset Graphics
- filename ../images/tabular-insert.png
- scale 85
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "tabular-insert"
\end_inset
or the menu
\family sans
-Insert\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
Table
\family default
.
- The toolbar button offers you a graphical selection: Move the mouse to
+ The toolbar button offers you a graphical selection: move the mouse to
set the column/row number of the table that should be created and then
press a mouse button.
When you use the menu to create a table, a dialog will appear, asking you
\begin_inset Newline newline
\end_inset
- The default table has lines around any cell and the first row appears separated
+The default table has lines around any cell and the first row appears separated
from the rest of the table.
This separation occurs due to a double line: The cells of the first row
have a line below them and the cells of the second row have a line above
them.
Here is an example table:
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="4">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Section
Table Dialog
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
You can alter a table by clicking on it with the right mouse button, which
- brings up the table dialog.
- Here you can adjust the settings of that cell and row/column respectively
- where the cursor is currently placed.
+ brings up the context menu.
+ Under the menu entry
+\family sans
+More
+\family default
+ you can adjust the settings of that cell and row/column respectively where
+ the cursor is currently placed.
+ The context menu
+\family sans
+More\SpecialChar menuseparator
+Settings
+\family default
+ opens the table dialog where you can adjust more things.
Most of the dialog options also work on selections.
This means if you select more cells, columns or rows, the action is done
for the whole selection.
contents
\emph default
of the cell, and the cell itself.
- You can alter tables with the following tabs of the table dialog:
+\begin_inset Newline newline
+\end_inset
+
+With the dialog option
+\family sans
+Immediate
+\begin_inset space ~
+\end_inset
+
+Apply
+\family default
+ every change you make in the dialog is directly applied.
+ If you move the cursor to another table cell the dialog will then also
+ be updated with the parameters of the new cell.
+ If you change length values in the dialog you must press
+\family sans
+Return
+\family default
+ to get the change applied.
+\begin_inset Newline newline
+\end_inset
+
+You can alter tables with the following tabs of the table dialog:
\end_layout
\begin_layout Description
Settings
\family default
- Here you can set the horizontal alignment and the width of the current
- column.
+ Here you can set the table width
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table ! Width
+\end_layout
+
+\end_inset
+
+, and the horizontal alignment and the width of the current column.
+ The alignment
+\family sans
+At
+\begin_inset space ~
+\end_inset
+
+Decimal
+\begin_inset space ~
+\end_inset
+
+Separator
+\family default
+ is described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Special-Cell-Alignment"
+
+\end_inset
+
+.
When you have set a width you can also adjust the vertical alignment of
the current row.
A given width will allow the cell to have line breaks and multiple paragraphs
- of text, see section
-\begin_inset space ~
+ of text, see sec.
+\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Multiple-Lines-in"
+reference "subsec:Multiple-Lines-in"
\end_inset
.
- If you set no width, the column is as wide as their widest cell content
- is.
+ If you set no width, the column is as wide as the content of its widest
+ cell.
\begin_inset Newline newline
\end_inset
Furthermore, you can mark one or multiple cells of one row as a multicolumn
- cell, see section
-\begin_inset space ~
+ cell, see sec.
+\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Multicolumns"
+reference "subsec:Multicolumns"
+
+\end_inset
+
+ or the cells of one column as multirow cell, see sec.
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Multirows"
\end_inset
\begin_inset Newline newline
\end_inset
-The rotate check boxes rotates the current cell, a selection, or the whole
- table counter-clockwise by 90°.
- The rotation is not shown within LyX, only in the output.
+The rotate check boxes rotate the current cell, a selection, or the whole
+ table counter-clockwise by 90
+\begin_inset space \thinspace{}
+\end_inset
+
+°.
+ The rotation is not shown within \SpecialChar LyX
+, only in the output.
+ For more information see sec.
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Rotated-Table-Cells"
+
+\end_inset
+
+.
\begin_inset Newline newline
\end_inset
\begin_inset Newline newline
\end_inset
-It is also possible to enter a LaTeX-argument which is needed for special
- table formattings, see section
-\begin_inset space ~
+The table-wide vertical alignment is used for tables within text lines:
+\begin_inset Newline newline
+\end_inset
+
+A line with tables with different alignments:
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="top">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+A
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+A
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="bottom">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+A
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+It is also possible to enter a \SpecialChar LaTeX
+-argument which is needed for special table
+ formattings, see sec.
+\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Multicolumn-Calculations"
+reference "subsec:Multicolumn-Calculations"
\end_inset
\family sans
Formal
\family default
- will convert the table to a formal table as described in section
-\begin_inset space ~
+ will convert the table to a formal table as described in sec.
+\begin_inset space \thinspace{}
\end_inset
\begin_inset Newline newline
\end_inset
-You can also add here space to table rows as decribed in section
-\begin_inset space ~
+You can also add space here to table rows as described in sec.
+\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Row-Spacing"
+reference "subsec:Row-Spacing"
\end_inset
\end_inset
that can run over several pages.
- Section
+ Sections
\begin_inset space ~
\end_inset
describe the longtable features in detail.
\end_layout
-\begin_layout Standard
-When the table dialog is open, you can move the cursor with the arrow keys
- from cell to cell and the property of the current cell will immediately
- be displayed in the dialog.
-\end_layout
-
\begin_layout Section
Table Toolbar
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
The table toolbar is an alternative to the table dialog to be able to alter
tables faster.
- It should normally appear at the bottom of LyX's main window when the cursor
+ It should normally appear at the bottom of \SpecialChar LyX
+'s main window when the cursor
is inside a table.
You can alternatively switch it on to appear always, by right-clicking
- in LyX's main menu bar.
+ in \SpecialChar LyX
+'s main menu bar.
\end_layout
\begin_layout Standard
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_append-row.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular append-row"
\end_inset
adds a row below the current cell or selection
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_append-column.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular append-column"
\end_inset
adds a column right beside the current cell or selection
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_delete-row.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular delete-row"
\end_inset
deletes the current row or selection
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_delete-column.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular delete-column"
\end_inset
deletes the current column or selection
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_toggle-line-top.png
- scaleBeforeRotation
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular move-row-up"
+\end_inset
+
+ moves the row up
+\end_layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular move-column-left"
\end_inset
- adds a line at the top of the current cell / row or of a selection
+ moves the column to the left
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_toggle-line-bottom.png
- scaleBeforeRotation
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular move-row-down"
+\end_inset
+ moves the row down
+\end_layout
+
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular move-column-right"
\end_inset
- adds a line at the bottom of the current cell / row or of a selection
+ moves the column to the right
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_toggle-line-left.png
- scaleBeforeRotation
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular toggle-line-top"
+\end_inset
+
+ adds a line at the top of the current cell / row or of a selection
+\end_layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular toggle-line-bottom"
\end_inset
- adds a line at the left side of the current cell / row or of a selection
+ adds a line at the bottom of the current cell / row or of a selection
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_toggle-line-right.png
- scaleBeforeRotation
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular toggle-line-left"
+\end_inset
+
+ adds a line at the left side of the current cell / row or of a selection
+\end_layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular toggle-line-right"
\end_inset
adds a line at the right side of the current cell / row or of a selection
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_set-all-lines.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular set-all-lines"
\end_inset
adds lines around the current or selected cells - if the current cell no
- multicolumn this also affects the current row and column
+ multicolumn cell this also affects the current row and column
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_unset-all-lines.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular unset-all-lines"
\end_inset
deletes all lines of the current or selected cells - if the current cell
- no multicolumn this also affects the current row and column
+ no multicolumn cell this also affects the current row and column
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_m-align-left.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular m-align-left"
\end_inset
left-aligns the content of the current cell / column
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_m-align-center.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular m-align-center"
\end_inset
centers the content of the current cell / column horizontally
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_m-align-right.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular m-align-right"
\end_inset
right-aligns the content of the current cell / column
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_m-valign-top.png
- scaleBeforeRotation
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular align-decimal"
+\end_inset
+ aligns the content of the current column at a character
+\end_layout
+
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular m-valign-top"
\end_inset
aligns the content of the current cell vertically to the top
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_m-valign-middle.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular m-valign-middle"
\end_inset
centers the content of the current cell vertically
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_m-valign-bottom.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular m-valign-bottom"
\end_inset
aligns the content of the current cell vertically to the bottom
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_set-rotate-cell.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular set-rotate-cell"
\end_inset
rotates the current cell or selection counter-clockwise by 90°
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_set-rotate-tabular.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular set-rotate-tabular"
\end_inset
rotates the whole table counter-clockwise by 90°
\begin_layout Labeling
\labelwidthstring 00.00.0000
-\begin_inset Graphics
- filename ../images/tabular-feature_multicolumn.png
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular multicolumn"
\end_inset
sets the current cell or selection as a multicolumn
\end_layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular multirow"
+\end_inset
+
+ sets the current cell or selection as a multirow
+\end_layout
+
\begin_layout Standard
\begin_inset Note Greyedout
status open
\begin_layout Section
Edit Table Menu
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-Additionally to the table dialog and toolbar, the menu
+In addition to the table dialog and toolbar, the menu
\family sans
-Edit\SpecialChar \menuseparator
+Edit\SpecialChar menuseparator
Table
\family default
allows you to add and delete border lines for the current row/column and
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
\color none
\begin_inset Formula $\left[\begin{array}{cc}
a & b\\
-c & d\end{array}\right]$
+c & d
+\end{array}\right]$
\end_inset
\begin_layout Standard
Table floats can be inserted using the menu
\family sans
-Insert\SpecialChar \menuseparator
-Float\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
+Float\SpecialChar menuseparator
Table
\family default
or the toolbar button
-\begin_inset Graphics
- filename ../images/float-insert_table.png
- scale 85
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "float-insert table"
\end_inset
.
\end_inset
(# is the actual table number).
- You can insert tables to the float above or below the caption.
+ You can insert tables in the float above or below the caption.
\end_layout
\begin_layout Standard
\begin_layout Standard
Having the caption above the table is the common rule that is unfortunately
- not supported in LaTeX's standard classes.
- That means if you are using the document classes
+ not supported in \SpecialChar LaTeX
+'s standard classes.
+ This means that, if you are using the document classes
\family sans
article
\family default
\family sans
report
\family default
- there will be no space between the caption and the table.
+, there will be no space between the caption and the table.
To insert the needed space, add the following option to the load command
- of the LaTeX-package
+ of the \SpecialChar LaTeX
+-package
\series bold
caption
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! caption
+\SpecialChar LaTeX
+-packages ! caption
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
Tables can be cross-referenced in the text by referencing their label.
To do this insert a label in the caption using the menu
\family sans
-Insert\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
Label
\family default
or the toolbar button
-\begin_inset Graphics
- filename ../images/label-insert.png
- scale 85
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "label-insert"
\end_inset
.
You can now refer to the label using the menu
\family sans
-Insert\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
Cross
\begin_inset space ~
\end_inset
reference
\family default
or the toolbar button
-\begin_inset Graphics
- filename ../images/dialog-show-new-inset_ref.png
- scale 85
- scaleBeforeRotation
-
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset ref"
\end_inset
.
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
header
\family default
is defined.
- This therefore called the main header.
+ This is therefore called the main header.
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-footer: The current row is defined to be a footer row that appear on the
+footer: The current row is defined to be a footer row that appears on the
last page of the longtable.
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Longtable-Captions"
+reference "subsec:Longtable-Captions"
\end_inset
\begin_layout Standard
You can also specify a row where the table is split.
See the following longtable to see how it works:
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="69" columns="3">
-<features islongtable="true">
+<features islongtable="true" longtabularalignment="center">
<column alignment="left" valignment="top" width="0cm">
<column alignment="left" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Longtable-Captions"
+reference "subsec:Longtable-Captions"
\end_inset
Footnotes in Longtables
\begin_inset CommandInset label
LatexCommand label
-name "sub:Footnotes-in-Longtables"
+name "subsec:Footnotes-in-Longtables"
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Subsection
Longtable Alignment
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-Longtables are by default centered.
- In contrary to the alignment of the table columns and row, the table alignment
- can currently not be changed in the table dialog.
- To change the alignment of longtables you have to change the value of the
- lengths
+The horizontal alignment of longtables can be set in the table settings
+ dialog.
+ For left- and right-alignment the table will be directly at the page border.
+ To add space between the table and the border one has to set the alignment
+ to center and change the value of the \SpecialChar LaTeX
+-lengths
\series bold
\backslash
LTleft
\series default
-and
+or
\series bold
\backslash
LTright
\series default
- by inserting this line as TeX-Code before the corresponding longtable:
+ by inserting this line as \SpecialChar TeX
+ Code before the longtable:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-Where the value can have any of the units listed in Table
+The value can have any of the units listed in Table
\begin_inset space ~
\end_inset
\backslash
fill
\series default
-, which is in this case the same as an horizontal fill in LyX.
+, which is in this case the same as an horizontal fill in \SpecialChar LyX
+.
\end_layout
\begin_layout Standard
-The following longtable was left-aligned by setting
+The following longtable was centered and
\series bold
\backslash
LTleft
\series default
- to 0
-\begin_inset space \thinspace{}
-\end_inset
-
-pt.
+ set to
+\family sans
+0.1
+\backslash
+columnwidth
+\family default
+:
\begin_inset ERT
status collapsed
\backslash
setlength{
\backslash
-LTleft}{0pt}
+LTleft}{0.1
+\backslash
+columnwidth}
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="5" columns="5">
-<features islongtable="true">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<features islongtable="true" longtabularalignment="center">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Longtable-Captions"
+reference "subsec:Longtable-Captions"
\end_inset
\begin_layout Subsection
Longtable Captions
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "sub:Longtable-Captions"
+name "subsec:Longtable-Captions"
\end_inset
A longtable cannot be put into a table float because floats can only be
on one page.
But the caption environment of floats can also be used for longtables when
- you use for a table row the longtable option
+ you use the longtable option
\family sans
Caption
\family default
\end_inset
.
- Only one table row can contain the caption.
+ Only one table row should contain a caption, either a header or a footer
+ row.
\end_layout
\begin_layout Standard
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="5">
-<features islongtable="true">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row caption="true">
+<features islongtable="true" longtabularalignment="center">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row endfirsthead="true" caption="true">
<cell multicolumn="1" alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
Longtable with caption
-\begin_inset OptArg
+\begin_inset Argument 1
status open
\begin_layout Plain Layout
1:
\series default
- The table number is increased for every longtable, also if you didn't set
- a caption for it.
+ The table number is increased for every longtable, even if you did not
+ set a caption for it.
For this reason you could have the case that e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space ~
\end_inset
-2.4 follows on Table
+2.4 follows Table
\begin_inset space ~
\end_inset
2.1 in the list of tables if there are two longtables without captions.
- To avoid this you can add the following command in TeX-Code behind every
- longtable without a caption:
+ To avoid this you can add the following command in \SpecialChar TeX
+ Code after every longtable
+ without a caption:
\end_layout
\begin_layout Plain Layout
\end_layout
\begin_layout Plain Layout
-This is not needed when none of your longtables have a caption and you add
+This is not needed when none of your longtables has a caption and you add
the following code to the document preamble:
\end_layout
hyperref
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! hyperref
+\SpecialChar LaTeX
+-packages ! hyperref
\end_layout
\end_inset
\begin_layout Subsubsection
References to Longtables
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="5">
-<features islongtable="true">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row caption="true">
+<features islongtable="true" longtabularalignment="center">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row endfirsthead="true" caption="true">
<cell multicolumn="1" alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
Referenced longtable
\begin_layout Standard
The caption layout can be set together with all other captions of your document
- using the LaTeX-package
+ using the \SpecialChar LaTeX
+-package
\series bold
caption
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! caption
+\SpecialChar LaTeX
+-packages ! caption
\end_layout
\end_inset
\begin_layout Subsubsection
Caption Width
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-The maximal width of of caption lines is defined by the length
+The maximal width of caption lines is defined by the length
\series bold
\backslash
in.
To change it add the following command to your document preamble or as
- TeX-Code into your document before the longtable that should be affected
+ \SpecialChar TeX
+ Code into your document before the longtable that should be affected
\end_layout
\begin_layout Standard
\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="5">
-<features islongtable="true">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row caption="true">
+<features islongtable="true" longtabularalignment="center">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row endfirsthead="true" caption="true">
<cell multicolumn="1" alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
long full title with default width long full title with default width long
full title with default width
-\begin_inset OptArg
+\begin_inset Argument 1
status collapsed
\begin_layout Plain Layout
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="5">
-<features islongtable="true">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row caption="true">
+<features islongtable="true" longtabularalignment="center">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row endfirsthead="true" caption="true">
<cell multicolumn="1" alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
long full title with width set to 5
\end_inset
cm
-\begin_inset OptArg
+\begin_inset Argument 1
status collapsed
\begin_layout Plain Layout
\series bold
Note:
\series default
- When the LaTeX-package
+ When the \SpecialChar LaTeX
+-package
\series bold
caption
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! caption
+\SpecialChar LaTeX
+-packages ! caption
\end_layout
\end_inset
\begin_inset space \thinspace{}
\end_inset
-in, or the LaTeX-command
+in, or the \SpecialChar LaTeX
+-command
\series bold
\backslash
\begin_layout Subsubsection
Different Captions for Table Pages
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
When the table captions for the following pages should differ from the one
- of the first table page, insert a caption with the TeX code command
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-caption*{caption text}
-\backslash
-
-\backslash
-%
-\end_layout
+ of the first table page, mark a empty row as header which contains a caption.
+ Then right-click on the caption and select in the context menu
+\family sans
+Caption
+\begin_inset space ~
+\end_inset
-\begin_layout Standard
-in a dummy caption row that is marked as header.
+(LongTableNoNumber)
+\family default
+.
Table
\begin_inset space ~
\end_inset
\end_inset
- is an example for a longtable with different heading where the second caption
- doesn't include the table number.
+ is an example of a longtable with different heading where the second caption
+ does not include the table number.
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="59" columns="3">
-<features islongtable="true" lastFootEmpty="true">
+<features islongtable="true" longtabularalignment="center">
<column alignment="left" valignment="top" width="0cm">
<column alignment="left" valignment="top" width="0pt">
<column alignment="center" valignment="top" width="0pt">
-<row caption="true">
+<row endfirsthead="true" caption="true">
<cell multicolumn="1" alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
Example Phone List
\end_inset
-\begin_inset OptArg
+\begin_inset Argument 1
status collapsed
\begin_layout Plain Layout
\end_inset
</cell>
</row>
-<row endhead="true">
-<cell alignment="left" valignment="top" leftline="true" usebox="none">
+<row endhead="true" caption="true">
+<cell multicolumn="1" alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset ERT
-status open
+\begin_inset Caption LongTableNoNumber
\begin_layout Plain Layout
-
-
-\backslash
-caption*{Continued Example Phone List}
-\backslash
-
-\backslash
-%
+Continued Example Phone List
\end_layout
\end_inset
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell multicolumn="2" alignment="left" valignment="top" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell multicolumn="2" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="right" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" bottomline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" bottomline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\begin_layout Subsection
Longtable Calculation
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-LaTeX calculates the height of table pages and their page breaks using so
- called chunks.
- Chunks are pieces of the tables that are at once in LaTeX's memory.
- The default value is historically set to only 20 table rows.
+\SpecialChar LaTeX
+ calculates the height of table pages and their page breaks using so called
+ chunks.
+ Chunks are parts of tables that held at the same time in \SpecialChar LaTeX
+'s memory.
+ The default value was historically set to only 20 table rows.
If you are using longtables with many pages this may slow down the creation
of your document.
You can safely increase the chunk size to values of 100-1000 by adding
\begin_layout Subsection
Floats and Longtables
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_layout Standard
There might be problems when a float appears on the same page where a longtable
starts.
- To avoid such situation, add the command
-\series bold
+ To avoid such a situation, insert a
+\begin_inset Quotes eld
+\end_inset
-\backslash
-clearpage
-\series default
- as TeX-Code before your longtable.
+clear page
+\begin_inset Quotes erd
+\end_inset
+
+ (menu
+\family sans
+Insert\SpecialChar menuseparator
+Formatting\SpecialChar menuseparator
+Clear
+\begin_inset space ~
+\end_inset
+
+Page
+\family default
+) before your longtable.
\end_layout
\begin_layout Subsection
Forced Page Breaks
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\begin_inset Quotes erd
\end_inset
- as TeX-Code at this point of the cell where it can be broken.
+ as \SpecialChar TeX
+ Code at the point of the cell where it can be broken.
Before the
\series bold
\backslash
\series default
- command you have to insert in TeX-Code so many
+ command you have to insert in \SpecialChar TeX
+ Code as many
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- characters like the number of the following table columns.
+ characters as the number of the following table columns.
The
\series bold
&
\series default
is the character to separate table cells.
- Write in TeX-Code after each
+ Write in \SpecialChar TeX
+ Code after each
\series bold
&
\series default
\begin_inset Newline newline
\end_inset
-Behind the the
+After the
\series bold
\backslash
\backslash
\series default
- command, insert so many
+ command, insert as many
\series bold
&
\series default
- characters like the number of table columns before the current column.
+ characters as the number of table columns before the current column.
In Table
\begin_inset space ~
\end_inset
the cell that should be broken is in the second column followed by another
column.
- Therefore the following command was inserted in the cell as TeX-Code behind
+ Therefore the following command was inserted in the cell as \SpecialChar TeX
+ Code after
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- in the third columns of the row was deleted.
+ in the third column of the row was deleted.
\series bold
\backslash
newpage
\series default
- is only needed when a page break should definitively occur at this position,
- otherwise it is only a possibility to break.
+ is only needed when a page break should definitely occur at this position,
+ otherwise it would be a conditional break.
If your footer row of the longtable has for a certain reason no upper line
but you would have a horizontal line where the cell is broken, use this
command instead:
\end_layout
\begin_layout Standard
-must be inserted as TeX-Code at the beginning of the cell.
- This assures that the part of the cell that will be displayed on the new
+must be inserted as \SpecialChar TeX
+ Code at the beginning of the cell.
+ This ensures that the part of the cell that will be displayed on the new
page appears with the full width.
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="38" columns="3">
-<features islongtable="true" lastFootEmpty="true">
+<features islongtable="true" lastFootEmpty="true" longtabularalignment="center">
<column alignment="left" valignment="top" width="0cm">
<column alignment="left" valignment="top" width="3cm">
<column alignment="center" valignment="top" width="0pt">
-<row caption="true">
+<row endfirsthead="true" caption="true">
<cell multicolumn="1" alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
Table with forced page break in table cell
\end_inset
-\begin_inset OptArg
+\begin_inset Argument 1
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Section
-Multiple Lines Columns and Rows
+Multiple Lines, Columns and Rows
\end_layout
\begin_layout Subsection
Multiple Lines in Table Cells
\begin_inset CommandInset label
LatexCommand label
-name "sub:Multiple-Lines-in"
+name "subsec:Multiple-Lines-in"
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="middle" width="2.5cm">
-<column alignment="center" valignment="middle" width="0">
-<column alignment="center" valignment="middle" width="0">
+<column alignment="center" valignment="middle">
+<column alignment="center" valignment="middle">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\end_layout
\begin_layout Standard
-Adjusting a fixed width for a column, enables to enter text as a paragraph
- with multiple lines and hyphenations.
+Setting a fixed width for a column enables you to enter text as a paragraph
+ with multiple lines and hyphenation.
\end_layout
\begin_layout Standard
cm and choose centered for the vertical and horizontal alignment.
The vertical alignment is used for all cells of the row.
- As our text is smaller than than 2.5
+ As our text is smaller than 2.5
\begin_inset space \thinspace{}
\end_inset
\begin_layout Standard
If you have a long word in a cell with a fixed width, it cannot be hyphenated
- by LaTeX if it is the first entry.
- Therefore you need to insert something, to make the word not being the
+ by \SpecialChar LaTeX
+ if it is the first entry.
+ Therefore you need to insert something to prevent the word not being the
first entry.
So add a horizontal space of 0
\begin_inset space \thinspace{}
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="middle" width="2.5cm">
-<column alignment="center" valignment="middle" width="0">
-<column alignment="center" valignment="middle" width="0">
+<column alignment="center" valignment="middle">
+<column alignment="center" valignment="middle">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="middle" width="2.5cm">
-<column alignment="center" valignment="middle" width="0">
-<column alignment="center" valignment="middle" width="0">
+<column alignment="center" valignment="middle">
+<column alignment="center" valignment="middle">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
Multicolumns
\begin_inset CommandInset label
LatexCommand label
-name "sub:Multicolumns"
+name "subsec:Multicolumns"
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-To span a cell over multiple columns, mark as much cells within a line that
- should be one spanned cell and use either the table-toolbar button
-\begin_inset Graphics
- filename ../images/tabular-feature_multicolumn.png
- scale 85
- scaleBeforeRotation
-
+To merge cells over multiple columns, select as many cells within a row
+ as you want to merge and use either the table-toolbar button
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular multicolumn"
\end_inset
, or the menu
\family sans
-Edit\SpecialChar \menuseparator
-Table\SpecialChar \menuseparator
+Edit\SpecialChar menuseparator
+Table\SpecialChar menuseparator
Multicolumn
\family default
-, or right click on the marked cells and choose multicolumn in the appearing
- table dialog under the tab
+, or right click on the marked cells and choose
\family sans
-Table Settings
+Multicolumn
\family default
-.
+ in the context menu.
\end_layout
\begin_layout Standard
the multicolumn.
Here is an example table with a multicolumn cell in the first row and one
in the last row without the upper border:
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="4">
-<features firstHeadTopDL="true" firstHeadBottomDL="true">
+<features firstHeadTopDL="true" firstHeadBottomDL="true" tabularvalignment="middle">
<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="middle" width="0">
+<column alignment="center" valignment="middle">
<column alignment="center" valignment="top" width="0in">
<column alignment="center" valignment="top" width="0pt">
<row>
Multicolumn Calculations
\begin_inset CommandInset label
LatexCommand label
-name "sub:Multicolumn-Calculations"
+name "subsec:Multicolumn-Calculations"
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-LyX supports multicolumns directly, but we have to take notice of the cell
+\SpecialChar LyX
+ supports multicolumns directly, but we have to take account of the cell
width of the columns spanned by the multicolumn cell.
\end_layout
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
Table with centered multicolumn text above two columns that have exactly
half the width of the multicolumn cell
-\begin_inset OptArg
+\begin_inset Argument 1
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="middle" width="0" special=">{\centering}m{1.25cm-6.2pt}">
-<column alignment="center" valignment="middle" width="0">
-<column alignment="center" valignment="top" width="0">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="middle" special=">{\centering}m{1.25cm-6.2pt}">
+<column alignment="center" valignment="middle">
+<column alignment="center" valignment="top">
<row>
<cell multicolumn="1" alignment="center" valignment="middle" topline="true" leftline="true" usebox="none" special=">{\centering}m{2.5cm}">
\begin_inset Text
\end_inset
cm in the table dialog.
- The spanned columns should have exactly half the width of the multicolumn
- cell, so that you would adjust a width of 1.25
+ The merged columns should have exactly half the width of the multicolumn
+ cell, so that you would set a width of 1.25
\begin_inset space \thinspace{}
\end_inset
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
\end_inset
-Table where the spanned table columns have not exactly half the width of
+Table where the spanned table columns are not exactly half the width of
the multicolumn cell
-\begin_inset OptArg
+\begin_inset Argument 1
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
+<features tabularvalignment="middle">
<column alignment="center" valignment="top" width="1.25cm">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none" width="2.5cm">
\begin_inset Text
\end_layout
\begin_layout Standard
-You can see that the first column has not the half width of the multicolumn
+You can see that the first column is not half the width of the multicolumn
cell, it is a bit bigger.
- The reason is that the given width of a cell
+ The reason is that the specified width of a cell
\begin_inset Formula $W_{g}$
\end_inset
\begin_inset Formula $W_{\mathrm{tot}}$
\end_inset
- because a cell is always a bit larger than its given width.
+ because a cell is always a bit larger than specified.
Appendix
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
-LatexCommand eqref
+LatexCommand ref
reference "cha:Explanation-of-Equation"
\end_inset
- explains it in detail.
+ explains this in detail.
\end_layout
\begin_layout Standard
-The needed given width
-\begin_inset Formula $W_{g\, n}$
+The width
+\begin_inset Formula $W_{g\,n}$
\end_inset
- when
+ which the user needs to set when
\emph on
n
\emph default
columns are spanned can be calculated, so that each column has a total
width of
-\begin_inset Formula $W_{\mathrm{tot\, multicolumn}}/n$
+\begin_inset Formula $W_{\mathrm{tot\,multicolumn}}/n$
\end_inset
:
-\begin_inset Formula \begin{equation}
-W_{g\, n}=(W_{g\,\mathrm{multicolumn}}+(1-n)\cdot(12.4\,\mathrm{pt}))/n\label{eq:Wgn}\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{g\,n}=(W_{g\,\mathrm{multicolumn}}+(1-n)\cdot(12.4\,\mathrm{pt}))/n\label{eq:Wgn}
+\end{equation}
\end_inset
\end_inset
becomes
-\begin_inset Formula \begin{equation}
-W_{g\,2}=1.25\,\mathrm{cm}-6.2\,\mathrm{pt}\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{g\,2}=1.25\,\mathrm{cm}-6.2\,\mathrm{pt}
+\end{equation}
\end_inset
\end_layout
\begin_layout Standard
-To enable calculations in LaTeX, the LaTeX-package
+To enable calculations in \SpecialChar LaTeX
+, the \SpecialChar LaTeX
+-package
\series bold
calc
\series default
must be loaded with the document preamble line
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! calc
+\SpecialChar LaTeX
+-packages ! calc
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-LyX does not allow to calculate lengths in the width-field of the table
+\SpecialChar LyX
+ does not allow you to calculate lengths in the
+\family sans
+Width
+\family default
+ field of the table dialog.
+ Therefore you have to format the column by inserting a \SpecialChar LaTeX
+-argument in the
dialog.
- Therefore you have to format the column by inserting a LaTeX-argument in
- the dialog.
Here is an overview about the arguments:
\end_layout
\end_layout
\begin_layout Standard
-By entering a LaTeX-argument, all cell settings set in the table dialog
- are overwritten.
+By entering a \SpecialChar LaTeX
+-argument, all cell settings set in the table dialog are overwritt
+en.
\end_layout
\begin_layout Standard
\series bold
Note:
\series default
- Due to a bug, LyX shows the overwritten settings anyway.
+ Due to a bug, \SpecialChar LyX
+ shows the overwritten settings anyway.
\end_layout
\end_inset
centering
\series default
is added.
- You can now enter the following LaTeX-argument for the first spanned column:
+ You can now enter the following \SpecialChar LaTeX
+-argument for the first spanned column:
\end_layout
\begin_layout Standard
\begin_layout Standard
Although we have chosen centered alignment for the text of the multicolumn
cell, it is still left aligned.
- This is because LyX only applies the alignment to single columns.
- So we have to use for the multicolumn the LaTeX-argument
+ This is because \SpecialChar LyX
+ only applies the alignment to single columns.
+ So for the multicolumn cell we have to use the \SpecialChar LaTeX
+-argument
\end_layout
\begin_layout Standard
\begin_layout Subsection
Multirows
-\begin_inset Index
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Multirows"
+
+\end_inset
+
+
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_inset
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-In contrary to multicolumns multirows are not yet supported by LyX so a
- bit of TeX-Code needs to be used.
- To use multirows load the LaTeX-package
-\series bold
+To merge cells over multiple rows, select as many cells within a column
+ as you want to merge and use either the table-toolbar button
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular multirow"
+\end_inset
+
+, or the menu
+\family sans
+Edit\SpecialChar menuseparator
+Table\SpecialChar menuseparator
+Multirow
+\family default
+, or right click on the marked cells and choose
+\family sans
+Multirow
+\family default
+ in the context menu.
+\end_layout
+
+\begin_layout Standard
+Here is an example table with a multirow in the first column:
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+a long cell entry
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+b
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+c
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell multirow="3" alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
multirow
-\series default
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! multirow
+e
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+f
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell multirow="4" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+h
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+i
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
- in your document preamble with the command
\end_layout
\begin_layout Standard
+The width of multirow cells is set by setting the width and alignment for
+ the whole column.
+ The
+\family sans
+Vertical Offset
+\family default
+ shifts the content of the multirow up/down if the offset is positive/negative.
+\end_layout
+\begin_layout Standard
+If the column of a multirow cell has no explicit width, the multirow cell
+ inherits the alignment of the column.
+ Otherwise it is by default left-aligned.
+ To override the default, renew the command
\series bold
\backslash
-usepackage{multirow}
+multirowsetup
+\series default
+ with the command
\end_layout
\begin_layout Standard
-Multirows are created with the command
+
+\series bold
+
+\backslash
+renewcommand{
+\backslash
+multirowsetup}{
+\backslash
+centering}
\end_layout
\begin_layout Standard
+in the document preamble.
+ Then all entries of multirow cells in the document are centered.
+ If centering is only needed for several tables, you can renew the command
+ in a \SpecialChar TeX
+ Code box just before the table instead of the preamble.
+ If the text should be right-aligned, replace
+\series bold
+
+\backslash
+centering
+\series default
+ by
+\series bold
+\backslash
+raggedleft
+\series default
+.
+ To return to left-alignment
\series bold
\backslash
-multirow{number of rows}{cell width}{cell entry}
+raggedright
+\series default
+ is used.
\end_layout
\begin_layout Standard
-To create the following table:
+This is an example table with a right-aligned multirow cell that has a vertical
+ offset of -4
+\begin_inset space \thinspace{}
+\end_inset
+
+mm and is in a 3
+\begin_inset space \thinspace{}
+\end_inset
+
+cm wide column:
+\begin_inset Separator parbreak
+\end_inset
+
+
\end_layout
\begin_layout Standard
+\noindent
\align center
\begin_inset ERT
status collapsed
\backslash
multirowsetup}{
\backslash
-centering}
+raggedleft}
\end_layout
\end_inset
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="4" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="3cm">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-a
+a long cell entry
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+t
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-multirow{2}{2.5cm}{
+\begin_layout Plain Layout
+n
\end_layout
\end_inset
-
-multirow entry
-\begin_inset ERT
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-}
+m
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell multirow="3" mroffset="-4mm" alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+multirow
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+<cell multirow="4" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-create a 3×3 table.
- Unset the upper border of the last cell in the first column.
- The multirow is now created in the second row of the first column by inserting
- there the command
-\end_layout
+To start a new line in a multirow you can use a forced line break (shortcut
+
+\begin_inset Info
+type "shortcut"
+arg "newline-insert newline"
+\end_inset
-\begin_layout Standard
+) but this will not respect the cell lines as demonstrated in this table:
+\begin_inset Separator parbreak
+\end_inset
-\series bold
-\backslash
-multirow{2}{2.5cm}{
\end_layout
\begin_layout Standard
-as TeX-Code.
- According to the command parameters the multirow spans now two rows and
- has a width of 2.5
-\begin_inset space \thinspace{}
-\end_inset
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="2">
+<features tabularvalignment="middle">
+<column alignment="left" valignment="middle" width="2cm">
+<column alignment="center" valignment="top">
+<row>
+<cell multirow="3" alignment="left" valignment="middle" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-cm.
- The content of the multirow cell follows outside the TeX-Code box and the
- command is finished with a right brace
-\series bold
-}
-\series default
- in another TeX-Code-box behind the text.
-\end_layout
+\begin_layout Plain Layout
+aaa
+\begin_inset Newline newline
+\end_inset
-\begin_layout Standard
+aaa
+\begin_inset Newline newline
+\end_inset
-\series bold
+wrong cell
+\end_layout
-\backslash
-multirow
-\series default
- left-aligns its content by default.
- To override the default, renew the command
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-multirowsetup
-\series default
- with the command
+\begin_layout Plain Layout
+ccc
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+</row>
+<row>
+<cell multirow="4" alignment="left" valignment="middle" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\series bold
+\begin_layout Plain Layout
-\backslash
-renewcommand{
-\backslash
-multirowsetup}{
-\backslash
-centering}
\end_layout
-\begin_layout Standard
-in TeX-Code in the document preamble.
- Then all entries of multirow cells in the document are centered.
- If centering is only needed for several tables, you can renew the command
- in an TeX-Code box just before the table instead of the preamble.
- If the text should be right-aligned, replace
-\series bold
-
-\backslash
-centering
-\series default
- by
-\series bold
-
-\backslash
-raggedleft
-\series default
-.
- To return to left-alignment
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-raggedright
-\series default
- is used.
+\begin_layout Plain Layout
+ddd
\end_layout
-\begin_layout Section
-Formal Tables
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Formal-Tables"
-
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+bbb
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Table ! Formal
+eee
\end_layout
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
\end_inset
\end_layout
\begin_layout Standard
-Tables are often typeset in books similar to Table
-\begin_inset space ~
-\end_inset
+Therefore be careful with forced line breaks.
+\end_layout
+
+\begin_layout Subsection
+Cells with diagonal line(s)
+\end_layout
+\begin_layout Standard
+To tell the reader what is meant by column and row headings in a table,
+ it is helpful to split the first cell of the table by one or two diagonal
+ lines.
+ This can be achieved by loading the \SpecialChar LaTeX
+ package
+\series bold
+diagbox
+\series default
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Example-booktabs-table"
+\begin_inset Index idx
+status collapsed
-\end_inset
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! picinpar
+\end_layout
-.
- This kind of tables is called
-\begin_inset Quotes eld
\end_inset
+ in the document preamble.
+ The package provides the command
+\series bold
-\emph on
-formal
-\emph default
-
-\begin_inset Quotes erd
+\backslash
+diagbox
+\series default
+ that is inserted as \SpecialChar TeX
+ Code and that can take 2 or 3
+\begin_inset space ~
\end_inset
-.
- To make a table a formal table use the option
-\family sans
-Formal
-\family default
- in the
-\family sans
-Borders
-\family default
- tab of the table dialog.
+arguments:
\end_layout
\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
-\begin_layout Plain Layout
-\begin_inset Caption
+\series bold
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Example-booktabs-table"
+\backslash
+diagbox[options]{lower left}{upper right}
+\end_layout
-\end_inset
+\begin_layout Standard
-Example booktabs-table
+\series bold
+
+\backslash
+diagbox[options]{lower left}{upper left}{upper right}
\end_layout
+\begin_layout Standard
+The first scheme divides the cell by a single diagonal line and the arguments
+ are placed below and above this line.
+ The second scheme divides the cell by 2
+\begin_inset space ~
\end_inset
-
+lines.
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="8" columns="4">
-<features booktabs="true">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-System
+
+
+\backslash
+ifdiagbox
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-Medipix
-\begin_inset space \thinspace{}
-\end_inset
-1
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following section will only be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+diagbox
+\series default
+ is installed.
\end_layout
\end_inset
-</cell>
-<cell multicolumn="1" alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-Medipix
-\begin_inset space \thinspace{}
-\end_inset
-2
\end_layout
+\begin_layout Standard
+Here is an example table where
+\series bold
+
+\backslash
+diagbox
+\series default
+is used in the 2-argument scheme in the first cell:
+\begin_inset VSpace medskip
\end_inset
-</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
\end_layout
-\end_inset
-</cell>
-</row>
+\begin_layout Standard
+\noindent
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="4">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\backslash
-cmidrule(r){2-2}
+diagbox{
\end_layout
\end_inset
-
+Name
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
+}{
+\end_layout
-\backslash
-cmidrule(l){3-4}
+\end_inset
+
+Parameter
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
\end_inset
-Detector thickness [µm]
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-300
+Thickness in nm
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-300
+Transparency in %
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-700
+Hardness in MPa
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Edge angle [°]
+Perfect Green
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-3.55
+45
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-2.71
+80
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-7.99
+504
\end_layout
\end_inset
</cell>
</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Spatial resolution [µm]
+Dark Multi-P
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-4.26
+60
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-10.17
+72
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-10.56
+982
\end_layout
\end_inset
</cell>
</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-MTF at
-\begin_inset Formula $f_{\mathrm{max}}$
-\end_inset
-
-
+Crystal Clear Pro
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-0.53
+18
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-0.37
+86
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-0.39
+374
\end_layout
\end_inset
</cell>
</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset VSpace medskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The 3-argument scheme is for example useful for cross-tables of sports leagues
+ or distances:
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="4">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\backslash
-cmidrule(l{10pt}){1-1}
+diagbox{
\end_layout
\end_inset
-LSF-spatial resolution
+Team home
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Result
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
+
+\end_inset
+
+Team away
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+Tigers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+Panthers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+Falcons
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+Tigers
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+—
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+1:3
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+0:1
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-in µm
+Panthers
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-129.7
+3:1
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-52.75
+—
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-50.78
+0:0
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-in % of pixel size
+Falcons
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-76.3
+1:0
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-95.9
+0:0
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-92.3
+—
\end_layout
\end_inset
\end_layout
+\begin_layout Standard
+For larger cross-tables one might use split cells in 2 or every corner of
+ the table like in this example:
+\begin_inset Separator parbreak
\end_inset
\end_layout
\begin_layout Standard
-Spaces to table rows can be added using the
-\family sans
-Borders
-\family default
- tab of the table dialog as described in section
-\begin_inset space ~
-\end_inset
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="5" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\begin_inset ERT
+status open
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Row-Spacing"
+\begin_layout Plain Layout
-\end_inset
-.
+\backslash
+diagbox{
\end_layout
-\begin_layout Standard
-In contrary to normal tables, formal tables have no vertical table lines.
- The horizontal table lines can be set like for normal tables but they appear
- with different width in the output:
-\begin_inset Newline newline
\end_inset
-The first and the last table line have a default width of 0.08
-\begin_inset space \thinspace{}
-\end_inset
+Team home
+\begin_inset ERT
+status collapsed
-em while the other lines have a default width of 0.05
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
-em.
+}{
\end_layout
-\begin_layout Standard
-The default widths can be changed with the following preamble lines
+\end_inset
+
+Result
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
+Team away
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
-\backslash
-let
-\backslash
-mytoprule
-\backslash
-toprule
-\begin_inset Newline newline
\end_inset
-\backslash
-renewcommand{
-\backslash
-toprule}{
-\backslash
-mytoprule[width]}
\end_layout
-\begin_layout Standard
-This example is for the first line, the so called
-\series bold
-toprule
-\series default
-.
- If you want to change the width for the last line, replace
-\series bold
-toprule
-\series default
- by
-\series bold
-bottomrule
-\series default
-.
- To change the width for the other lines replace
-\series bold
-toprule
-\series default
- by
-\series bold
-midrule
-\series default
-.
- You can use all units listed in appendix
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "cha:Units-available-in"
+\begin_layout Plain Layout
+Tigers
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
- to set the width.
+\begin_layout Plain Layout
+Panthers
\end_layout
-\begin_layout Standard
-Lines that don't span over all table columns can be created by setting a
- table line for multicolumn cells.
- LyX will then internally use the command
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-cmidrule
-\series default
- to create this line.
- Its full scheme is
+\begin_layout Plain Layout
+Falcons
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-cmidrule[width](trim){startcol-endcol}
-\end_layout
+\begin_layout Plain Layout
+\begin_inset ERT
+status open
-\begin_layout Standard
-The options of
-\series bold
+\begin_layout Plain Layout
-\backslash
-cmidrule
-\series default
- are are currently not supported by LyX so you have to use TeX-Code to be
- able to use them.
-
-\series bold
\backslash
-cmidrule
-\series default
-s can manually be created by inserting the command as TeX-Code as first
- cell entry of the first cell of a row.
- The line is then drawn in the output above the current row.
+diagbox[dir=NE]{
\end_layout
-\begin_layout Standard
-The default for the width is 0.03
-\begin_inset space \thinspace{}
\end_inset
-em.
- Startcol is the number of the column where the line starts and endcol the
- column number where the line ends.
- The endcol always needs to be specified, also when the line should span
- only one column.
- The optional parameter trim could be either
-\emph on
-l{trimwidth}
-\emph default
-, or
-\emph on
-r{trimwidth}
-\emph default
- where the trimwidth is also optional.
- Using for example the parameter
-\emph on
-l{2pt}
-\emph default
- means that the line is trimmed from its left end by 2
-\begin_inset space \thinspace{}
-\end_inset
+Team home
+\begin_inset ERT
+status collapsed
-pt.
- If you don't specify the trimwidth the lines are trimmed by the default
- of 0.5
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
-em.
+}{
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Example-booktabs-table"
-
\end_inset
- was created using the commands
-\end_layout
-
-\begin_layout Standard
-
-\series bold
+Result
+\begin_inset ERT
+status collapsed
-\backslash
-cmidrule(r){2-2}
-\backslash
-cmidrule(l){3-4}
-\end_layout
+\begin_layout Plain Layout
-\begin_layout Standard
-at the beginning of the in the second row and
+}{
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
+Team away
+\begin_inset ERT
+status collapsed
-\backslash
-cmidrule(l{10pt}){1-1}
-\end_layout
+\begin_layout Plain Layout
-\begin_layout Standard
-in the sixth row.
+}
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
\end_layout
-\begin_layout Standard
-You might want to have overlapping
-\series bold
-
-\backslash
-cmidrule
-\series default
-s like in Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Special-booktabs-table"
-
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-.
- This can be achieved with the TeX-Code command
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-morecmidrules
+\begin_layout Plain Layout
+Tigers
\end_layout
-\begin_layout Standard
-The command that was used for the second row of Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Special-booktabs-table"
-
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
- is
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-cmidrule(r){2-2}
-\backslash
-cmidrule(l){3-4}
-\backslash
-morecmidrules
-\backslash
-cmidrule{2-4}
-\end_layout
-
-\begin_layout Standard
-The command for the sixth row is
+\begin_layout Plain Layout
+—
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-midrule
-\backslash
-morecmidrules
-\backslash
-cmidrule{3-4}
+\begin_layout Plain Layout
+1:3
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-
-\end_layout
-
-\begin_layout Standard
-If you are anyway not satisfied with the border line spacing, you can use
- the following command to produce lines that span over all table columns
-\series bold
-:
+\begin_layout Plain Layout
+0:1
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-specialrule{width}{space above}{space below}
+\begin_layout Plain Layout
+Tigers
\end_layout
-\begin_layout Standard
-For more information about these specialties, we refer to the manual of
- the LaTeX-package
-\series bold
-booktabs
-\series default
-
-\begin_inset CommandInset citation
-LatexCommand cite
-key "booktabs"
-
\end_inset
-
-.
-\begin_inset Index
-status collapsed
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! booktabs
+Panthers
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+3:1
\end_layout
-\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Special-booktabs-table"
+—
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-Special booktabs-table
+\begin_layout Plain Layout
+0:0
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+Panthers
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="8" columns="4">
-<features booktabs="true">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+\end_inset
+</cell>
+</row>
<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-System
+Falcons
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Medipix
-\begin_inset space \thinspace{}
-\end_inset
-
-1
+1:0
\end_layout
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Medipix
-\begin_inset space \thinspace{}
+0:0
+\end_layout
+
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-2
+\begin_layout Plain Layout
+—
\end_layout
\end_inset
</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+Falcons
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\begin_inset ERT
-status collapsed
+status open
\begin_layout Plain Layout
\backslash
-cmidrule(r){2-2}
+diagbox[dir=SW]{
\end_layout
\end_inset
-
+Team home
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-
-\backslash
-cmidrule(l){3-4}
+}{
\end_layout
\end_inset
-
+Result
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-
-\backslash
-morecmidrules
+}{
\end_layout
\end_inset
-
+Team away
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-
-\backslash
-cmidrule{2-4}
+}
\end_layout
\end_inset
-Detector thickness [µm]
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-300
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-300
+Tigers
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-700
+Panthers
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Edge angle [°]
+Falcons
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-3.55
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
+\begin_inset ERT
+status open
\begin_layout Plain Layout
-2.71
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-7.99
+\backslash
+diagbox[dir=SE]{
\end_layout
\end_inset
-</cell>
-</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+
+Team home
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-Spatial resolution [µm]
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+
+Result
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-4.26
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+
+Team away
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-10.17
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-10.56
+
\end_layout
\end_inset
</cell>
</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+</lyxtabular>
-\begin_layout Plain Layout
-MTF at
-\begin_inset Formula $f_{\mathrm{max}}$
\end_inset
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-0.53
+\begin_layout Standard
+To rotate the diagonal lines, the command option
+\series bold
+dir=direction
+\series default
+ is used.
+
+\emph on
+direction
+\emph default
+ is either
+\series bold
+NE
+\series default
+,
+\series bold
+DE
+\series default
+,
+\series bold
+SW
+\series default
+ or
+\series bold
+NW
+\series default
+ and represent a point of a compass.
+
+\series bold
+SW
+\series default
+ is for example the south-west corner.
+ Thus in the lower left cell of the above table the command
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+\begin_layout Standard
-\begin_layout Plain Layout
-0.37
+\series bold
+
+\backslash
+diagbox[dir=SW]{Team home}{Result}{Team away}
+\end_layout
+
+\begin_layout Standard
+is used.
+ If no direction is given, it will be NW.
\end_layout
+\begin_layout Standard
+The necessary width of split cells is automatically calculated.
+ Thus if you set a fixed column width smaller than the calculated one, the
+ cell's content will protrude the cell borders:
+\begin_inset Separator parbreak
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-0.39
+
\end_layout
-\end_inset
-</cell>
-</row>
+\begin_layout Standard
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="3cm">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\backslash
-morecmidrules
+diagbox{
\end_layout
\end_inset
-
+Name
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-
-\backslash
-cmidrule{3-4}
+}{
\end_layout
\end_inset
-LSF-spatial resolution
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
+Parameter
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+Thickness in nm
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-in µm
+Perfect Green
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-129.7
+45
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-52.75
-\end_layout
+</row>
+</lyxtabular>
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-50.78
+
\end_layout
+\begin_layout Standard
+If you need a certain width for columns with a split cell, use the command
+ option
+\series bold
+width=3cm
+\series default
+ (replace '3cm' by the width you need).
+ In the following table the width of the first column is set to 4
+\begin_inset space \thinspace{}
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-in % of pixel size
-\end_layout
+cm.
+ For
+\series bold
+\backslash
+diagbox
+\series default
+ a width of 4
+\begin_inset space \thinspace{}
\end_inset
-</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-76.3
-\end_layout
+cm + 2
+\begin_inset space \thinspace{}
\end_inset
-</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-95.9
-\end_layout
+\backslash
+tabcolsep is necessary because the overall width is the width for the text
+ (in this case the 4
+\begin_inset space \thinspace{}
\end_inset
-</cell>
-<cell alignment="center" valignment="top" bottomline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-92.3
-\end_layout
-
-\end_inset
-</cell>
-</row>
-</lyxtabular>
+cm) plus two times the separation of the text and the cell border.
+ The calculation of the width cannot be done in the command option of
+\series bold
-\end_inset
+\backslash
+diagbox
+\series default
+ so one needs to create a new length which can be used later.
+ This is done with the \SpecialChar TeX
+ Code commands
+\end_layout
+\begin_layout Standard
-\end_layout
+\series bold
+\backslash
+newlength{
+\backslash
+diagtest}
+\begin_inset Newline newline
\end_inset
+\backslash
+setlength{
+\backslash
+diagtest}{4cm+2
+\backslash
+tabcolsep}
\end_layout
-\begin_layout Section
-Vertical Table Alignment
-\begin_inset Index
+\begin_layout Standard
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Table ! Alignment
-\end_layout
-
-\end_inset
+\backslash
+newlength{
+\backslash
+diagtest}
\end_layout
-\begin_layout Standard
-To align tables vertically in a text line the table must be inside a box.
- The box can then be vertically aligned as described in section
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Box-Dialog"
+\backslash
+setlength{
+\backslash
+diagtest}{4cm+2
+\backslash
+tabcolsep}
+\end_layout
\end_inset
-.
+
\end_layout
\begin_layout Standard
-In the following example the tables are inside a minipage
-\begin_inset Foot
+To enable calculations in \SpecialChar LaTeX
+ one needs to load the package
+\series bold
+calc
+\series default
+
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Minipages are described in section
-\begin_inset space ~
+\SpecialChar LaTeX
+-packages ! calc
+\end_layout
+
\end_inset
+ in the document preamble.
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Minipages"
+\begin_layout Standard
+In this table you can now use the command
+\end_layout
-\end_inset
+\begin_layout Standard
-.
+\series bold
+
+\backslash
+diagbox[width=
+\backslash
+diagtest]{A}{B}
\end_layout
+\begin_layout Standard
+in the first cell:
+\begin_inset Separator parbreak
\end_inset
- box that has a width of 15
-\begin_inset space \thinspace{}
-\end_inset
-col%:
\end_layout
-\begin_layout Itemize
-test
-\begin_inset Box Frameless
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "15col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
-
-\begin_layout Plain Layout
+\begin_layout Standard
+\noindent
+\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="4cm">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-a
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_inset ERT
+status open
\begin_layout Plain Layout
-d
+
+
+\backslash
+diagbox[width=
+\backslash
+diagtest]{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+A
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-g
+
+}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+B
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-b
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-e
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-h
+Thickness in nm
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-c
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-f
+Perfect Green
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-i
+45
\end_layout
\end_inset
\end_layout
+\begin_layout Standard
+Note that the split cell needs to be the widest one in the column.
+ Otherwise the length of the diagonal line cannot be calculated correctly
+ like in this table:
+\begin_inset Separator parbreak
\end_inset
- test
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-raisebox{0.85
-\backslash
-baselineskip}{
+diagbox{
\end_layout
\end_inset
-
-\begin_inset Box Frameless
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "15col%"
-special "none"
-height "1in"
-height_special "totalheight"
+A
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-a
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-d
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+B
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-g
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-b
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-e
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-h
+Thickness in nm
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-c
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-f
+Perfect Green
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-i
+45
\end_layout
\end_inset
\end_layout
-\end_inset
-
-
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+\begin_layout Standard
+In this case use the
+\series bold
+width
+\series default
+ option of the
+\series bold
-}
-\end_layout
+\backslash
+diagbox
+\series default
+ command.
+ It is then not necessary to add 2
+\backslash
+tabcolsep because the cell width is now the width of the column.
+ In this table a width of 3
+\begin_inset space \thinspace{}
+\end_inset
+cm is used:
+\begin_inset Separator parbreak
\end_inset
\end_layout
-\begin_layout Itemize
-test
-\begin_inset Box Frameless
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "15col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
-
-\begin_layout Plain Layout
+\begin_layout Standard
+\noindent
+\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-a
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_inset ERT
+status open
\begin_layout Plain Layout
-d
+
+
+\backslash
+diagbox[width=3cm]{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+A
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-g
+
+}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+B
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-b
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-e
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-h
+Thickness in nm
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-c
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-f
+Perfect Green
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-i
+45
\end_layout
\end_inset
\end_layout
-\end_inset
+\begin_layout Standard
+For multiple text lines in split cells one needs some extra height to fit
+ the text to the cell.
+ This can be achieved with the
+\series bold
+
+\backslash
+diagbox
+\series default
+ option
+\series bold
+height=3cm
+\series default
+ (replace '3cm' by the height you need).
+ In the following table the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+diagbox[width=3cm,height=1.4cm]{A
+\backslash
+\backslash
+B}{C
+\backslash
+\backslash
+D}
\end_layout
-\begin_layout Itemize
-test
-\begin_inset Box Frameless
-position "b"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "15col%"
-special "none"
-height "1in"
-height_special "totalheight"
+\begin_layout Standard
+is used in the first cell.
+ The command
+\series bold
+
+\backslash
+
+\backslash
+
+\series default
+ creates hereby the line break.
+\begin_inset Foot
status collapsed
\begin_layout Plain Layout
+Breaking lines with
+\family sans
+Ctrl+Return
+\family default
+ is only possible when the column has a fixed width.
+\end_layout
+
+\end_inset
+
+
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-a
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
+
+
+\backslash
+diagbox[width=3cm,height=1.4cm]{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+A
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-d
+
+
+\backslash
+
+\backslash
+
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+B
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-g
+
+}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+C
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-b
+
+
+\backslash
+
+\backslash
+
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+D
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-e
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-h
+
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-c
+Thickness in nm
\end_layout
\end_inset
</cell>
+</row>
+<row>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-f
+Perfect Green
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-i
+45
\end_layout
\end_inset
\end_layout
-\end_inset
-
- test
+\begin_layout Standard
\begin_inset ERT
status collapsed
\backslash
-raisebox{-0.32
-\backslash
-baselineskip}{
+else
\end_layout
\end_inset
-\begin_inset Box Frameless
-position "b"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "15col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
+\begin_inset Note Note
+status open
\begin_layout Plain Layout
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+The following will be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+diagbox
+\series default
+ is not installed:
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+You need to install the \SpecialChar LaTeX
+-package
+\series bold
+diagbox
+\series default
+ to see the following part of this section in the output.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-a
+
+
+\backslash
+fi
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-d
+
\end_layout
+\begin_layout Standard
+For more info about the \SpecialChar LaTeX
+-package
+\series bold
+diagbox
+\series default
+, see its documentation,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "diagbox"
+
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-g
+.
\end_layout
+\begin_layout Section
+Formal Tables
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Formal-Tables"
+
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-b
+Table ! Formal
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-e
+
\end_layout
+\begin_layout Standard
+Tables are often typeset in books similar to Table
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Example-booktabs-table"
+
+\end_inset
+
+.
+ This kind of tables is called
+\begin_inset Quotes eld
+\end_inset
+
+
+\emph on
+formal
+\emph default
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+ To make a table a formal table use the option
+\family sans
+Formal
+\family default
+ in the
+\family sans
+Borders
+\family default
+ tab of the table dialog.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float table
+placement h
+wide false
+sideways false
+status open
\begin_layout Plain Layout
-h
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Example-booktabs-table"
+
+\end_inset
+
+Example booktabs-table
\end_layout
\end_inset
-</cell>
-</row>
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="8" columns="4">
+<features booktabs="true" tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-c
+System
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-f
+Chip
+\begin_inset space \thinspace{}
+\end_inset
+
+1
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-i
+Chip
+\begin_inset space \thinspace{}
+\end_inset
+
+2
\end_layout
\end_inset
</cell>
-</row>
-</lyxtabular>
-
-\end_inset
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+
+\backslash
+cmidrule(r){2-2}
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Standard
-As you can see, the content of the first and last table row is not correctly
- aligned with the text line where the table is in.
- To get this alignment, the minipage box must be set into a raisebox
-\begin_inset Foot
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Raiseboxes are described in section
-\begin_inset space ~
-\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Vertical-Alignment"
+\backslash
+cmidrule(l){3-4}
+\end_layout
\end_inset
-.
+Detector thickness in µm
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-.
- In the example above the second table in the first item is aligned using
- the TeX-Code-command
+\begin_layout Plain Layout
+300
\end_layout
-\begin_layout Standard
-
-\series bold
-
-\backslash
-raisebox{0.85
-\backslash
-baselineskip}{
-\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-\begin_layout Standard
-before the box.
- Behind the box the closing brace
-\series bold
-}
-\series default
- is inserted as TeX-Code.
- For the second table in the last item the command
+\begin_layout Plain Layout
+300
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-\backslash
-raisebox{-0.32
-\backslash
-baselineskip}{
+\begin_layout Plain Layout
+700
\end_layout
-\begin_layout Standard
-is used.
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+Edge angle in °
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+3.55
+\end_layout
-\series bold
-Note:
-\series default
- The alignment of the table row content to the surrounding text line is
- not exact.
- The needed factor of the
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
-\backslash
-raisebox
-\series default
- command for this alignment depends on the document font, the font size,
- and the table line thickness.
+\begin_layout Plain Layout
+2.71
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+7.99
\end_layout
-\begin_layout Section
-Colored Tables
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Colored-Tables"
-
\end_inset
+</cell>
+</row>
+<row topspace="default">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+Spatial resolution in µm
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Table ! Color
+4.26
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+10.17
\end_layout
-\begin_layout Subsection
-Colored Cells
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Table Color ! for Cells
+10.56
\end_layout
\end_inset
+</cell>
+</row>
+<row topspace="default">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+MTF at
+\begin_inset Formula $f_{\mathrm{max}}$
+\end_inset
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-Color ! for Table Cells
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+0.53
\end_layout
-\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+0.37
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Table-colored-without"
+0.39
+\end_layout
\end_inset
+</cell>
+</row>
+<row topspace="default">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
-Table colored without using the package
-\series bold
-colortbl
-\series default
-
-\begin_inset OptArg
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Table without colortbl
-\end_layout
-
-\end_inset
+\backslash
+cmidrule[2pt](l{10pt}){1-1}
\end_layout
\end_inset
-
+LSF-spatial resolution
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\color green
-a
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\color red
-b
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\color red
-c
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
-\color green
-d
+in µm
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
-\color blue
-e
+129.7
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+52.75
+\end_layout
-\color blue
-f
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+50.78
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
-\color green
-g
+in % of pixel size
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
-\color blue
-h
+76.3
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+95.9
+\end_layout
-\color blue
-i
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+92.3
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-If you only need colored text, mark the cells and choose a color in the
- menu
+Spaces to table rows can be added using the
\family sans
-Edit\SpecialChar \menuseparator
-Text
-\begin_inset space ~
-\end_inset
-
-Style
+Borders
\family default
-.
- This was used to create Table
+ tab of the table dialog as described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Table-colored-without"
+reference "subsec:Row-Spacing"
\end_inset
.
- In any other case you have to use the LaTeX-package
-\series bold
-colortbl
-\series default
-.
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-LaTeX-packages ! colortbl
-\end_layout
-
-\end_inset
-
-
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-ifcolortbl
-\end_layout
-
+Unlike normal tables, formal tables have no vertical table lines.
+ The horizontal table lines can be set as for normal tables but they appear
+ with different widths in the output:
+\begin_inset Newline newline
\end_inset
-
-\begin_inset Note Note
-status open
-
-\begin_layout Plain Layout
-The following section part will only be displayed when the LaTeX-package
-
-\series bold
-colortbl
-\series default
- is installed.
-\end_layout
-
+The first and the last table line have a default width of 0.08
+\begin_inset space \thinspace{}
\end_inset
+em while the other lines have a default width of 0.05
+\begin_inset space \thinspace{}
+\end_inset
+em.
\end_layout
\begin_layout Standard
-To create colored tables,
-\series bold
-colortbl
-\series default
- must be loaded in the preamble with the line
+The default widths can be changed with the following preamble lines
\end_layout
\begin_layout Standard
\series bold
\backslash
-usepackage{colortbl}
-\end_layout
-
-\begin_layout Standard
-The color of a column is adjusted with the command
-\end_layout
-
-\begin_layout Standard
+let
+\backslash
+mytoprule
+\backslash
+toprule
+\begin_inset Newline newline
+\end_inset
-\series bold
\backslash
-columncolor{name of color}
+renewcommand{
+\backslash
+toprule}{
+\backslash
+mytoprule[width]}
\end_layout
\begin_layout Standard
-inside the command
+This example is for the first line, the so called
\series bold
->{ }
+toprule
\series default
.
- More about the command
+ If you want to change the width for the last line, replace
\series bold
->{}
+toprule
\series default
- is described in section
+ by
+\series bold
+bottomrule
+\series default
+.
+ To change the width for the other lines replace
+\series bold
+toprule
+\series default
+ by
+\series bold
+midrule
+\series default
+.
+ You can use all units listed in appendix
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Multicolumn-Calculations"
+reference "cha:Units-available-in"
\end_inset
-.
-\end_layout
-
-\begin_layout Standard
-The following color names are predefined:
-\end_layout
-
-\begin_layout Standard
-
-\family sans
-red
-\family default
-,
-\family sans
-green
-\family default
-,
-\family sans
-yellow
-\family default
-,
-\family sans
-blue
-\family default
-,
-\family sans
-cyan
-\family default
-,
-\family sans
-magenta
-\family default
-,
-\family sans
-black
-\family default
- and
-\family sans
-white
+ to set the width.
\end_layout
\begin_layout Standard
-\begin_inset VSpace medskip
-\end_inset
-
-
-\end_layout
+Lines that do not span all table columns can be created by setting a table
+ line for multicolumn cells.
+ \SpecialChar LyX
+ will then internally use the command
+\series bold
-\begin_layout Standard
-You can also define your own color with the command
+\backslash
+cmidrule
+\series default
+ to create this line.
+ Its full scheme is
\end_layout
\begin_layout Standard
\series bold
\backslash
-definecolor{color name}{color model}{color values}
+cmidrule[height](trim){startcol-endcol}
\end_layout
\begin_layout Standard
-The color model can be
-\end_layout
-
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-cmyk: cyan, magenta, yellow, black
-\end_layout
-
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-rgb: red, green blue
-\end_layout
+The options of
+\series bold
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-gray gray
-\end_layout
+\backslash
+cmidrule
+\series default
+ are currently not supported by \SpecialChar LyX
+ so you have to use \SpecialChar TeX
+ Code to be able to
+ use them.
+
+\series bold
-\begin_layout Standard
-and the color values are comma separated numbers between 0 and 1 describing
- the factor for the corresponding color of the color model.
+\backslash
+cmidrule
+\series default
+s can manually be created by inserting the command as \SpecialChar TeX
+ Code as the first
+ cell entry of the first cell of a row.
+ The line is then drawn in the output above the current row.
\end_layout
\begin_layout Standard
-You can e.
+The default for the optional
+\series bold
+height
+\series default
+ is 0.03
\begin_inset space \thinspace{}
\end_inset
-g.
-\begin_inset space \space{}
+em.
+
+\series bold
+startcol
+\series default
+ is the number of the column where the line starts and
+\series bold
+endcol
+\series default
+ the column number where the line ends.
+ The
+\series bold
+endcol
+\series default
+ always needs to be specified, also when the line should span only one column.
+ The optional parameter
+\series bold
+trim
+\series default
+ could either be
+\emph on
+l{trimwidth}
+\emph default
+ or
+\emph on
+r{trimwidth}
+\emph default
+ where the
+\emph on
+trimwidth
+\emph default
+ is also optional.
+ Using for example the parameter
+\emph on
+l{2pt}
+\emph default
+ means that the line is trimmed from its left end by 2
+\begin_inset space \thinspace{}
\end_inset
-define the color "
+pt.
+ If you don't specify the
\emph on
-darkgreen
+trimwidth
\emph default
-" in the preamble with
-\end_layout
-
-\begin_layout Standard
-
-\series bold
+ the line is trimmed by the default of 0.5
+\begin_inset space \thinspace{}
+\end_inset
-\backslash
-definecolor{darkgreen}{cmyk}{0.5, 0, 1, 0.5}
+em.
\end_layout
\begin_layout Standard
-and the color "
-\emph on
-lightgray
-\emph default
-" with
-\end_layout
+\begin_inset VSpace bigskip
+\end_inset
-\begin_layout Standard
+Table
+\begin_inset space ~
+\end_inset
-\series bold
-\backslash
-definecolor{lightgray}{gray}{0.8}
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Example-booktabs-table"
-\begin_layout Standard
-\begin_inset VSpace medskip
\end_inset
-
-\end_layout
-
-\begin_layout Standard
-Lines are colored with the command
+ was created using the commands
\end_layout
\begin_layout Standard
\series bold
\backslash
-rowcolor{name of color}
+cmidrule(r){2-2}
+\backslash
+cmidrule(l){3-4}
\end_layout
\begin_layout Standard
-and cells are colored with the command
+at the beginning of the second row and
\end_layout
\begin_layout Standard
\series bold
\backslash
-cellcolor{name of color}
+cmidrule[2pt](l{10pt}){1-1}
\end_layout
\begin_layout Standard
-Both commands are inserted at the beginning of a cell as TeX-Code.
+in the sixth row.
\end_layout
\begin_layout Standard
-To color characters in the table, mark the cells and use the LyX menu
-\family sans
-Edit\SpecialChar \menuseparator
-Text
-\begin_inset space ~
+\begin_inset VSpace bigskip
\end_inset
-Style
-\family default
-.
- If a cell contains TeX-Code mark only the characters, otherwise the colored
- TeX-Code will cause LaTeX-errors.
+
\end_layout
\begin_layout Standard
-\begin_inset Note Greyedout
-status open
-
-\begin_layout Plain Layout
-
+You might want to have overlapping
\series bold
-Note:
-\series default
- Not all DVI-viewers are able to display self-defined colors.
-\end_layout
+\backslash
+cmidrule
+\series default
+s as in in Table
+\begin_inset space ~
\end_inset
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Special-booktabs-table"
+
+\end_inset
+
+.
+ This can be achieved with the \SpecialChar TeX
+ Code command
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
+\series bold
+\backslash
+morecmidrules
\end_layout
\begin_layout Standard
-To create Table
+The command that was used for the second row of Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Table-colored-using"
+reference "tab:Special-booktabs-table"
\end_inset
- do the following: The color of the first column should be
-\emph on
-darkgreen
-\emph default
-.
- So insert
+ is
\end_layout
\begin_layout Standard
\series bold
->{
+
\backslash
-columncolor{darkgreen}
+cmidrule(r){2-2}
\backslash
-centering}c
+cmidrule(l){3-4}
+\backslash
+morecmidrules
+\backslash
+cmidrule{2-4}
\end_layout
\begin_layout Standard
-as LaTeX-argument for this column.
- The first row should be blue, therefore the TeX-Code command
+The command for the sixth row is
\end_layout
\begin_layout Standard
\series bold
\backslash
-rowcolor{cyan}
+midrule
+\backslash
+morecmidrules
+\backslash
+cmidrule{3-4}
\end_layout
\begin_layout Standard
-is inserted to the first cell of this row.
- Note that this overwrites the column color for the first cell.
- The last cell of the last row is colored magenta by inserting the TeX-Code
- command
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+If you are in any way not satisfied with the border line spacing, you can
+ use the following command to produce lines that span over all table columns
+\series bold
+:
\end_layout
\begin_layout Standard
\series bold
\backslash
-cellcolor{magenta}
+specialrule{width}{space above}{space below}
\end_layout
\begin_layout Standard
-The characters could now be colored using the menu
-\family sans
-Edit\SpecialChar \menuseparator
-Text
-\begin_inset space ~
+For more information about these features, refer to the manual of the \SpecialChar LaTeX
+-package
+
+\series bold
+booktabs
+\series default
+
+\begin_inset CommandInset citation
+LatexCommand cite
+key "booktabs"
+
\end_inset
-Style
-\family default
.
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! booktabs
+\end_layout
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Table-colored-using"
+name "tab:Special-booktabs-table"
\end_inset
-Table colored using the package
-\series bold
-colortbl
-\series default
+Special booktabs-table
+\end_layout
-\begin_inset OptArg
-status collapsed
+\end_inset
+
+
+\end_layout
\begin_layout Plain Layout
-Table with colortbl
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="8" columns="4">
+<features booktabs="true" tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+System
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+Chip
+\begin_inset space \thinspace{}
+\end_inset
+1
\end_layout
\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+Chip
+\begin_inset space \thinspace{}
+\end_inset
+2
\end_layout
+\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0" special=">{\columncolor{darkgreen}\centering}c">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
<row>
<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\backslash
-rowcolor{cyan}
+cmidrule(r){2-2}
\end_layout
\end_inset
-\color magenta
-a
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+cmidrule(l){3-4}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\color red
-b
+
+\backslash
+morecmidrules
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\color red
-c
+
+\backslash
+cmidrule{2-4}
+\end_layout
+
+\end_inset
+
+Detector thickness in µm
\end_layout
\end_inset
</cell>
-</row>
-<row>
<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
-\color yellow
-d
+300
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
-\color blue
-e
+300
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
-\color blue
-f
+700
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
-\color yellow
-g
+Edge angle in °
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
-\color blue
-h
+3.55
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-cellcolor{magenta}
+2.71
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
-
-\color green
-i
+\begin_layout Plain Layout
+7.99
\end_layout
\end_inset
</cell>
</row>
-</lyxtabular>
+<row topspace="default">
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-\end_inset
+\begin_layout Plain Layout
+Spatial resolution in µm
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+4.26
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+10.17
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+10.56
\end_layout
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+</row>
+<row topspace="default">
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+MTF at
+\begin_inset Formula $f_{\mathrm{max}}$
+\end_inset
-\backslash
-else
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+0.53
+\end_layout
-\begin_inset Note Note
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-The following will be displayed when the LaTeX-package
-\series bold
-colortbl
-\series default
- is not installed:
+0.37
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+0.39
\end_layout
-\begin_layout Standard
-You need to install the package
-\series bold
-colortbl
-\series default
- to see the content of this section in the output.
-\end_layout
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
-\begin_layout Standard
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-fi
+morecmidrules
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Subsection
-Colored Lines
-\begin_inset Index
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Table Color ! for Lines
-\end_layout
-\end_inset
+\backslash
+cmidrule{3-4}
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
-\begin_layout Plain Layout
-Color ! for Table Lines
+LSF-spatial resolution
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\end_layout
-\begin_layout Standard
-As described in section
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Line-Thickness"
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
-, the line thickness for all lines in a table can be adjusted with the length
-
-\series bold
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+in µm
+\end_layout
-\backslash
-arrayrulewidth
-\series default
-.
- It is set to 1.5
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-pt for all tables of this section.
-\begin_inset ERT
-status collapsed
+\begin_layout Plain Layout
+129.7
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+52.75
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-\backslash
-setlength{
-\backslash
-arrayrulewidth}{1.5pt}
+\begin_layout Plain Layout
+50.78
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+in % of pixel size
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+76.3
\end_layout
-\begin_layout Standard
-To color vertical lines for example with green, create the following column
- format in the document preamble, according to the description in section
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+95.9
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Customized-Format"
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+92.3
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
\end_inset
-:
+
\end_layout
-\begin_layout Standard
+\end_inset
+
+
+\end_layout
+
+\begin_layout Section
+Vertical Table Alignment
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table ! Alignment
+\end_layout
+
+\end_inset
-\series bold
-\backslash
-newcolumntype{W}{!{
-\backslash
-color{green}
-\backslash
-vline}}
\end_layout
\begin_layout Standard
-For Table
+To align tables vertically in a text line, the table must be inside a box.
+ The box can then be vertically aligned as described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Table-with-vertical-colored"
+reference "sec:Box-Dialog"
\end_inset
- the LaTeX-argument
-\series bold
- WcW
-\series default
- was used for the last column and
-\series bold
- Wc
-\series default
- for the other columns.
-\end_layout
-
-\begin_layout Standard
-If you want to have several colors, define more column formats.
+.
\end_layout
\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
+In the following example the tables are inside a minipage
+\begin_inset Foot
+status collapsed
\begin_layout Plain Layout
-\begin_inset Caption
+Minipages are described in section
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Table-with-vertical-colored"
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Minipages"
\end_inset
-Table with colored vertical lines
+.
\end_layout
\end_inset
+ box that has a width of 15
+\begin_inset space \thinspace{}
+\end_inset
+col%:
\end_layout
+\begin_layout Itemize
+test
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "15col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
\begin_layout Plain Layout
-\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0" special="Wc">
-<column alignment="center" valignment="top" width="0" special="Wc">
-<column alignment="center" valignment="top" width="0" special="WcW">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+a
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+d
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+g
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+b
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+e
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+h
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+c
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+f
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+i
\end_layout
\end_inset
\end_inset
-
-\end_layout
-
-\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-To color horizontal lines for example with red, like in Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Table-with-horizontal-colored"
-
-\end_inset
-
-, insert these commands in TeX-Code before the table or table float:
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-let
-\backslash
-myHlineC
-\backslash
-hline
-\begin_inset Newline newline
-\end_inset
-
-
-\backslash
-renewcommand{
-\backslash
-hline}
-\begin_inset Newline newline
-\end_inset
-
-
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-hphantom{ }
-\end_layout
-
-\end_inset
-
-{
-\backslash
-arrayrulecolor{red}
-\backslash
-myHlineC
-\backslash
-arrayrulecolor{black}}
-\end_layout
-
-\begin_layout Standard
+ test
\begin_inset ERT
status collapsed
\backslash
-let
-\backslash
-myHlineC
-\backslash
-hline
-\end_layout
-
-\begin_layout Plain Layout
-
-
-\backslash
-renewcommand{
-\backslash
-hline}
-\end_layout
-
-\begin_layout Plain Layout
-
- {
-\backslash
-arrayrulecolor{red}
-\backslash
-myHlineC
+raisebox{0.85
\backslash
-arrayrulecolor{black}}
-\end_layout
-
-\end_inset
-
-
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Table-with-horizontal-colored"
-
-\end_inset
-
-Table with colored horizontal lines
+baselineskip}{
\end_layout
\end_inset
-\end_layout
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "15col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
\begin_layout Plain Layout
-\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+a
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
+d
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
+g
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
+b
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-sd
+e
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
+h
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
+c
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
+f
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-sd
+i
\end_layout
\end_inset
\end_inset
-\end_layout
-
-\begin_layout Standard
-To return to the default line color black, insert this command in TeX-Code
- behind the table or table float:
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-renewcommand{
-\backslash
-hline}{
-\backslash
-myHlineC}
-\end_layout
-
-\begin_layout Standard
-Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Table-with-colored"
-
-\end_inset
-
- is an example with colored vertical and horizontal lines.
-\end_layout
-
-\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Table-with-colored"
-
-\end_inset
-Table with colored lines
+}
\end_layout
\end_inset
\end_layout
+\begin_layout Itemize
+test
+\begin_inset Box Frameless
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "15col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
\begin_layout Plain Layout
-\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0" special="Wc">
-<column alignment="center" valignment="top" width="0" special="Wc">
-<column alignment="center" valignment="top" width="0" special="WcW">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+a
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+d
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+g
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+b
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+e
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+h
\end_layout
\end_inset
</cell>
</row>
-<row topspace="default">
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+c
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+f
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+i
\end_layout
\end_inset
\end_layout
-\begin_layout Standard
-\begin_inset ERT
+\begin_layout Itemize
+test
+\begin_inset Box Frameless
+position "b"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "15col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
status collapsed
\begin_layout Plain Layout
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
-\backslash
-renewcommand{
-\backslash
-hline}{
-\backslash
-myHlineC}
+\begin_layout Plain Layout
+a
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+d
\end_layout
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-
-\backslash
-setlength{
-\backslash
-arrayrulewidth}{0.4pt}
-\end_layout
+g
+\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+b
\end_layout
-\begin_layout Section
-Table Customization
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Table Customization
+e
\end_layout
\end_inset
-
-
-\begin_inset Index
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Table ! Customization
+h
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+c
\end_layout
-\begin_layout Subsection
-Row Spacing
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Row-Spacing"
-
\end_inset
-
-
-\begin_inset Index
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Table Customization ! Row Spacing
+f
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-
-\end_layout
-
-\begin_layout Standard
-You can add vertical space to table rows in the
-\family sans
-Borders
-\family default
- tab of the table dialog.
- You find there three possibilities:
+\begin_layout Plain Layout
+i
\end_layout
-\begin_layout Description
-Top
-\begin_inset space ~
-\end_inset
-
-of
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+</lyxtabular>
-row will add space above the characters of the table row.
- If the table is a formal table
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-Formal tables are explained in section
-\begin_inset space ~
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Formal-Tables"
-
-\end_inset
-
-.
\end_layout
\end_inset
- LyX will insert as default 0.5
-\begin_inset space \thinspace{}
-\end_inset
-
-em space.
- For normal tables the inserted space will unfortunately destroy the vertical
- table lines as in the following table:
-\begin_inset VSpace medskip
-\end_inset
+ test
+\begin_inset ERT
+status collapsed
+\begin_layout Plain Layout
-\begin_inset Newline newline
-\end_inset
+\backslash
+raisebox{-0.32
+\backslash
+baselineskip}{
+\end_layout
-\begin_inset space \hspace*{}
-\length 0pt
\end_inset
-\begin_inset space \hfill{}
-\end_inset
-
+\begin_inset Box Frameless
+position "b"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "15col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+\begin_layout Plain Layout
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="1">
-<features>
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-A
+a
\end_layout
\end_inset
</cell>
-</row>
-<row topspace="3mm">
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-3
-\begin_inset space \thinspace{}
-\end_inset
-
-mm space top of row
+d
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-C
+g
\end_layout
\end_inset
</cell>
</row>
-</lyxtabular>
-
-\end_inset
-
-
-\begin_inset space \hfill{}
-\end_inset
-
-
-\begin_inset space \hspace*{}
-\length 0pt
-\end_inset
-
-
-\begin_inset VSpace medskip
-\end_inset
-
-
-\begin_inset Newline newline
-\end_inset
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-So inserting space to the top of row for normal tables is only useful when
- you don't have vertical lines.
+\begin_layout Plain Layout
+b
\end_layout
-\begin_layout Description
-Bottom
-\begin_inset space ~
-\end_inset
-
-of
-\begin_inset space ~
-\end_inset
-
-row will add space below the characters of the table row.
- If the table is a formal table LyX will insert as default 0.5
-\begin_inset space \thinspace{}
-\end_inset
-
-em space, for normal tables the default size is 2
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-pt.
+\begin_layout Plain Layout
+e
\end_layout
-\begin_layout Description
-Between
-\begin_inset space ~
-\end_inset
-
-rows adds space between the current and the following row.
- If the table is a formal table LyX will insert as default 0.5
-\begin_inset space \thinspace{}
-\end_inset
-
-em space.
- For normal tables the inserted space will unfortunately destroy the vertical
- table lines as in the following table:
-\begin_inset VSpace medskip
-\end_inset
-
-
-\begin_inset Newline newline
-\end_inset
-
-
-\begin_inset space \hspace*{}
-\length 0pt
-\end_inset
-
-
-\begin_inset space \hfill{}
\end_inset
-
-
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="1">
-<features>
-<column alignment="center" valignment="top" width="0">
-<row>
+</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-A
+h
\end_layout
\end_inset
</cell>
</row>
-<row interlinespace="3mm">
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Formula $\downarrow$
-\end_inset
-
- 3
-\begin_inset space \thinspace{}
-\end_inset
+c
+\end_layout
-mm space between row
-\begin_inset Formula $\downarrow$
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+f
\end_layout
\end_inset
</cell>
-</row>
-<row>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Formula $\uparrow$
-\end_inset
+i
+\end_layout
- 3
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+</row>
+</lyxtabular>
-mm space between row
-\begin_inset Formula $\uparrow$
\end_inset
\end_layout
\end_inset
-</cell>
-</row>
-</lyxtabular>
-\end_inset
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
-\begin_inset space \hfill{}
\end_inset
-\begin_inset space \hspace*{}
-\length 0pt
+\end_layout
+
+\begin_layout Standard
+As you will see, the content of the first and last table row is not correctly
+ aligned.
+ To get this alignment, the minipage box must be set into a raisebox.
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+Raiseboxes are described in section
+\begin_inset space ~
\end_inset
-\begin_inset VSpace medskip
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Vertical-Alignment"
+
\end_inset
+.
+\end_layout
-\begin_inset Newline newline
\end_inset
-So inserting space between rows for normal tables is only useful when you
- don't have vertical lines.
+ In the example above the second table in the first item is aligned using
+ the \SpecialChar TeX
+ Code command
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-When you want to add extra height to all cells of all tables, you can do
- this with the following preamble lines:
+\series bold
+
+\backslash
+raisebox{0.85
+\backslash
+baselineskip}{
+\end_layout
+
+\begin_layout Standard
+before the box.
+ After the box the closing brace
+\series bold
+}
+\series default
+ is inserted as \SpecialChar TeX
+ Code.
+ For the second table in the last item the command
\end_layout
\begin_layout Standard
\series bold
\backslash
-@ifundefined{extrarowheight}
-\begin_inset Newline newline
-\end_inset
+raisebox{-0.32
+\backslash
+baselineskip}{
+\end_layout
+\begin_layout Standard
+is used.
+\end_layout
-\begin_inset ERT
-status collapsed
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
\begin_layout Plain Layout
+\series bold
+Note:
+\series default
+ The alignment of the table row content to the surrounding text line is
+ not exact.
+ The required value for the
+\series bold
\backslash
-hphantom{ }
+raisebox
+\series default
+ command for this alignment depends on the document font, the font size,
+ and the table line thickness.
\end_layout
\end_inset
-{
-\backslash
-usepackage{array}}{}
-\begin_inset Newline newline
+
+\end_layout
+
+\begin_layout Section
+Colored Tables
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Colored-Tables"
+
\end_inset
-\backslash
-setlength{
-\backslash
-extrarowheight}{height}
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table ! Color
\end_layout
-\begin_layout Standard
-But this has the disadvantage that the cell texts are no longer exactly
- vertically centered.
- (The package
-\series bold
-array
-\series default
- will be loaded automatically by LyX when you use self defined table formats.
- To avoid that it is loaded twice the command
-\series bold
+\end_inset
+
-\backslash
-@ifundefined
-\series default
- is used in the above command.)
\end_layout
-\begin_layout Standard
-In case you are using font sizes larger than the normal size, the table
- borders are often too close to the letters.
- This can be corrected by inserting the command
-\series bold
+\begin_layout Subsection
+Colored Cells
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table Color ! for Cells
+\end_layout
-\backslash
-strut
-\series default
- in TeX code at the beginning of a table row.
- Table
-\begin_inset space ~
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Vertical-alignment-of"
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Color ! for Table Cells
+\end_layout
\end_inset
- visualizes the effect.
+
\end_layout
\begin_layout Standard
-\noindent
\begin_inset Float table
placement h
wide false
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Vertical-alignment-of"
+name "tab:Table-colored-without"
\end_inset
-Vertical alignment of text with large font sizes.
-\end_layout
-
-\end_inset
+Table colored without using the package
+\series bold
+colortbl
+\series default
+\begin_inset Argument 1
+status collapsed
+\begin_layout Plain Layout
+Table without colortbl
\end_layout
-\begin_layout Plain Layout
-\begin_inset space \hfill{}
\end_inset
-\begin_inset Float table
-wide false
-sideways false
-status collapsed
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-Normal table.
\end_layout
\end_inset
\end_layout
\begin_layout Plain Layout
-\noindent
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="6" columns="1">
-<features>
-<column alignment="left" valignment="top" width="0">
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-Normal, g
+
+\color green
+a
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\size large
-Large
+\color red
+b
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\size larger
-Larger
+\color red
+c
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\size largest
-Largest
+\color green
+d
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\size huge
-Huge
+\color blue
+e
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-\size huge
-Huger
+\color blue
+f
\end_layout
\end_inset
</cell>
</row>
-</lyxtabular>
-
-\end_inset
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\color green
+g
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+
+\color blue
+h
+\end_layout
-\begin_inset space \hfill{}
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
-\begin_inset Float table
-wide false
-sideways false
-status collapsed
+\color blue
+i
+\end_layout
-\begin_layout Plain Layout
-\begin_inset Caption
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
-\begin_layout Plain Layout
-Table using the command
-\series bold
-\backslash
-strut
-\series default
-.
\end_layout
\end_inset
\end_layout
-\begin_layout Plain Layout
-\noindent
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="6" columns="1">
-<features>
-<column alignment="left" valignment="top" width="0">
-<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+If you only need colored text, mark the cells and choose a color in the
+
+\family sans
+Text
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-Normal, g
-\end_layout
+Style
+\family default
+ dialog (toolbar button
+\begin_inset Info
+type "icon"
+arg "dialog-show character"
+\end_inset
+).
+ This was used to create Table
+\begin_inset space ~
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\size large
-\begin_inset ERT
-status collapsed
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-colored-without"
-\begin_layout Plain Layout
+\end_inset
+.
+ In any other case you have to use the \SpecialChar LaTeX
+-package
+\series bold
+colortbl
+\series default
+.
+\begin_inset Index idx
+status collapsed
-\backslash
-strut
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! colortbl
\end_layout
\end_inset
-Large
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
+\end_layout
-\size larger
+\begin_layout Standard
\begin_inset ERT
status collapsed
\backslash
-strut
+ifcolortbl
\end_layout
\end_inset
-Larger
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following section part will only be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+colortbl
+\series default
+ is installed.
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\size largest
-\begin_inset ERT
-status collapsed
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+To create colored tables,
+\series bold
+colortbl
+\series default
+ must be loaded in the preamble with the line
+\end_layout
+
+\begin_layout Standard
+\series bold
\backslash
-strut
+usepackage{colortbl}
\end_layout
-\end_inset
+\begin_layout Standard
+The color of a column is adjusted with the command
+\end_layout
-Largest
+\begin_layout Standard
+
+\series bold
+
+\backslash
+columncolor{name of color}
\end_layout
+\begin_layout Standard
+inside the command
+\series bold
+>{ }
+\series default
+.
+ More about the command
+\series bold
+>{}
+\series default
+ is contained in section
+\begin_inset space ~
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\size huge
-\begin_inset ERT
-status collapsed
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Multicolumn-Calculations"
-\begin_layout Plain Layout
+\end_inset
+.
+\end_layout
-\backslash
-strut
+\begin_layout Standard
+The following color names are predefined:
\end_layout
-\end_inset
+\begin_layout Standard
-Huge
+\family sans
+red
+\family default
+,
+\family sans
+green
+\family default
+,
+\family sans
+yellow
+\family default
+,
+\family sans
+blue
+\family default
+,
+\family sans
+cyan
+\family default
+,
+\family sans
+magenta
+\family default
+,
+\family sans
+black
+\family default
+ and
+\family sans
+white
\end_layout
+\begin_layout Standard
+\begin_inset VSpace medskip
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\size giant
-\begin_inset ERT
-status collapsed
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+If you add the options
+\end_layout
+\begin_layout Standard
-\backslash
-strut
+\series bold
+usenames,dvipsnames
\end_layout
+\begin_layout Standard
+to the document class options in the document settings, you can additionally
+ use further 61
+\begin_inset space ~
+\end_inset
+
+colors.
+ These colors are listed in appendix
+\begin_inset space ~
\end_inset
-\size huge
-Huger
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "chap:List-of-dvips-colornames"
\end_inset
-</cell>
-</row>
-</lyxtabular>
+.
+ One of these colors,
+\family sans
+Maroon
+\family default
+, is used as example in Table
+\begin_inset space ~
\end_inset
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-colored-using"
\end_inset
+.
+\end_layout
-\begin_inset space \hfill{}
+\begin_layout Standard
+\begin_inset VSpace medskip
\end_inset
\end_layout
-\end_inset
+\begin_layout Standard
+You can also define your own color with the command
+\end_layout
+
+\begin_layout Standard
+\series bold
+\backslash
+definecolor{color name}{color model}{color values}
\end_layout
-\begin_layout Subsection
-Special Cell Alignment
-\begin_inset Index
-status collapsed
+\begin_layout Standard
+The color model can be
+\end_layout
-\begin_layout Plain Layout
-Table Customization ! Special Cell Alignment
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+cmyk: cyan, magenta, yellow, black
\end_layout
-\end_inset
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+rgb: red, green blue
+\end_layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+gray gray
+\end_layout
+\begin_layout Standard
+and the color values are comma separated numbers between 0 and 1 describing
+ the factor for the corresponding color of the color model.
\end_layout
\begin_layout Standard
-Sometimes it looks better when the cell entries of a column are aligned
- with a special character, e.
+You can e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \space{}
\end_inset
-with the decimal separator as in Table
-\begin_inset space ~
-\end_inset
+define the color "
+\emph on
+darkgreen
+\emph default
+" in the preamble with
+\end_layout
+\begin_layout Standard
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Table-cells-of"
+\series bold
-\end_inset
+\backslash
+definecolor{darkgreen}{cmyk}{0.5, 0, 1, 0.5}
+\end_layout
-.
+\begin_layout Standard
+and the color "
+\emph on
+lightgray
+\emph default
+" with
\end_layout
\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
-\begin_layout Plain Layout
-\begin_inset Caption
+\series bold
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Table-cells-of"
+\backslash
+definecolor{lightgray}{gray}{0.8}
+\end_layout
+\begin_layout Standard
+\begin_inset VSpace medskip
\end_inset
-Table cells of a column aligned with the decimal separator.
+
\end_layout
-\end_inset
+\begin_layout Standard
+Lines are colored with the command
+\end_layout
+\begin_layout Standard
-\end_layout
+\series bold
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="4" columns="2">
-<features>
-<column alignment="right" valignment="top" width="0">
-<column alignment="left" valignment="top" width="0" special="@{}l">
-<row>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none">
-\begin_inset Text
+\backslash
+rowcolor{name of color}
+\end_layout
-\begin_layout Plain Layout
-heading
+\begin_layout Standard
+and cells are colored with the command
\end_layout
-\end_inset
-</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
-\begin_layout Plain Layout
+\series bold
+\backslash
+cellcolor{name of color}
\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-12.
+\begin_layout Standard
+Both commands are inserted at the beginning of a cell as \SpecialChar TeX
+ Code.
\end_layout
+\begin_layout Standard
+To color characters in the table, mark the cells and use the
+\family sans
+Text
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-6
+Style
+\family default
+ dialog.
+ If a cell contains \SpecialChar TeX
+ Code mark only the characters, otherwise the colored
+ \SpecialChar TeX
+ Code will cause \SpecialChar LaTeX
+ errors.
\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
\begin_layout Plain Layout
-0.
+
+\series bold
+Note:
+\series default
+ Not all DVI-viewers are able to display self-defined colors.
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-68
+
\end_layout
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
--123.
+
\end_layout
+\begin_layout Standard
+To create Table
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-0
-\end_layout
-\end_inset
-</cell>
-</row>
-</lyxtabular>
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-colored-using"
\end_inset
-
+ do the following: The color of the first column should be
+\emph on
+darkgreen
+\emph default
+.
+ So insert
\end_layout
-\end_inset
-
+\begin_layout Standard
+\series bold
+>{
+\backslash
+columncolor{darkgreen}
+\backslash
+centering}c
\end_layout
\begin_layout Standard
-This table was created with a 4×2 table.
- The heading is a centered multicolumn.
- The first column is right-aligned and contains the digits before the decimal
- point and the decimal point.
- The second column is left aligned and contains the digits after the decimal
- point.
- To omit the space that is normally between two table columns, use the following
- LaTeX-argument for the second column:
+as \SpecialChar LaTeX
+-argument for this column.
+ The first row should be light blue, therefore the \SpecialChar TeX
+ Code command
\end_layout
\begin_layout Standard
\series bold
-@{}l
+
+\backslash
+rowcolor{cyan}
\end_layout
\begin_layout Standard
-Table
-\begin_inset space ~
-\end_inset
+is inserted to the first cell of this row.
+ Note that this overwrites the column color for the first cell.
+ The last cell of the last row is colored maroon by inserting the \SpecialChar TeX
+ Code
+ command
+\end_layout
+\begin_layout Standard
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Several-table-cell"
+\series bold
+
+\backslash
+cellcolor{Maroon}
+\end_layout
+\begin_layout Standard
+The characters could now be colored using the menu
+\family sans
+Edit\SpecialChar menuseparator
+Text
+\begin_inset space ~
\end_inset
- shows some example alignments.
- For the alignment with the relation sign, you must add the second smallest
- math-space at the beginning of the last column to get the correct space
- surrounding the relation sign.
+Style
+\family default
+.
\end_layout
\begin_layout Standard
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Several-table-cell"
+name "tab:Table-colored-using"
\end_inset
-Several table cell alignments.
+Table colored using the package
+\series bold
+colortbl
+\series default
+
+\begin_inset Argument 1
+status collapsed
+
+\begin_layout Plain Layout
+Table with colortbl
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="4" columns="6">
-<features>
-<column alignment="right" valignment="top" width="0">
-<column alignment="left" valignment="top" width="0" special="@{}l">
-<column alignment="right" valignment="top" width="0">
-<column alignment="left" valignment="top" width="0" special="@{}l">
-<column alignment="right" valignment="top" width="0">
-<column alignment="left" valignment="top" width="0" special="@{}l">
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" special=">{\columncolor{darkgreen}\centering}c">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-units
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+rowcolor{cyan}
+\end_layout
+
+\end_inset
+
+
+\color magenta
+a
\end_layout
\end_inset
</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+\color red
+b
\end_layout
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-exponents
+
+\color red
+c
\end_layout
\end_inset
</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+\color yellow
+d
\end_layout
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-relations
+
+\color blue
+e
\end_layout
\end_inset
</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+\color blue
+f
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-12×
+
+\color yellow
+g
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-24
-\begin_inset space \thinspace{}
-\end_inset
-bottles
+\color blue
+h
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Formula $10\cdot$
-\end_inset
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+\backslash
+cellcolor{Maroon}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-\begin_inset Formula $10^{\mbox{-}17}$
-\end_inset
+\color green
+i
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+</row>
+</lyxtabular>
-\begin_layout Plain Layout
-\begin_inset Formula $\Gamma(t)\propto$
\end_inset
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-\begin_inset Formula $\:\Upsilon(t)$
-\end_inset
\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-1024×
+
+
+\backslash
+else
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-768
-\begin_inset space \thinspace{}
-\end_inset
-Pixels
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following will be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+colortbl
+\series default
+ is not installed:
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\begin_inset Formula $5.78\cdot$
-\end_inset
+\end_layout
+\begin_layout Standard
+You need to install the package
+\series bold
+colortbl
+\series default
+ to see the content of this section in the output.
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\begin_inset Formula $10^{7}$
-\end_inset
+\backslash
+fi
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\begin_inset Formula $A\ne$
-\end_inset
+\end_layout
+
+\begin_layout Subsection
+Colored Rows
+\begin_inset Index idx
+status collapsed
+\begin_layout Plain Layout
+Table Color ! for Rows
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-\begin_inset Formula $\: B_{\mathrm{red}}$
+Color ! for Table Rows
+\end_layout
+
\end_inset
\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+In case every second table row needs to be colored there is an alternative
+ to the method described in the previous section: One loads the package
+
+\series bold
+xcolor
+\series default
+
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-32×
+\SpecialChar LaTeX
+-packages ! xcolor
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+vspace{4mm}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-6
-\begin_inset space \thinspace{}
-\end_inset
-cm
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
--
-\begin_inset Formula $33.5\cdot$
-\end_inset
+ in the document preamble with the command
+\end_layout
+\begin_layout Standard
+
+\series bold
+\backslash
+usepackage[table]{xcolor}
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
-\begin_layout Plain Layout
-\begin_inset Formula $10^{4}$
-\end_inset
+\series bold
+xcolor
+\series default
+ automatically loads also the package
+\series bold
+colortbl
+\series default
+\begin_inset Index idx
+status collapsed
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! colortbl
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
+
+, so
+\series bold
+colortbl
+\series default
+ must be installed in your \SpecialChar LaTeX
+-distribution, otherwise you get \SpecialChar LaTeX
+-errors.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\begin_inset Formula $\sin(\alpha)\ge$
-\end_inset
+\backslash
+ifcolortbl
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\begin_inset Formula $\:\sin(\beta)$
-\end_inset
+\begin_inset Note Note
+status open
+\begin_layout Plain Layout
+The following section part will only be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+colortbl
+\series default
+ is installed.
\end_layout
\end_inset
-</cell>
-</row>
-</lyxtabular>
-\end_inset
+\end_layout
+\begin_layout Standard
+The table rows are colored with the command
\end_layout
-\end_inset
+\begin_layout Standard
+\series bold
+\backslash
+rowcolors[commands]{row number}{odd row color}{even row color}
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
+that is either inserted in the document preamble or as \SpecialChar TeX
+ Code before the
+ first table to be colored.
+ row
+\begin_inset space ~
\end_inset
-There is also the LaTeX-package
-\series bold
-dcolumn
-\series default
+number is the number of the first row which should be colored according
+ to the odd row color.
+ commands can be additional commands that are executed before every table
+ row.
+ So for example the command
+\end_layout
-\begin_inset Index
-status collapsed
+\begin_layout Standard
-\begin_layout Plain Layout
-LaTeX-packages ! dcolumn
-\end_layout
+\series bold
-\end_inset
+\backslash
+rowcolors{1}{white}{lightgray}
+\end_layout
- that provides table cell alignments.
- But this unfortunately treats the cell entries as math and does not allow
- formulas in table cells: The first column of Table
+\begin_layout Standard
+leads to the coloring scheme of Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Several-table-cell"
+reference "tab:Table-rowcolors"
\end_inset
- will look with
+.
+ The command
+\end_layout
+
+\begin_layout Standard
+
\series bold
-dcolumn
-\series default
- like the first column in Table
+
+\backslash
+rowcolors[
+\backslash
+hline]{1}{lightgray}{cyan}
+\end_layout
+
+\begin_layout Standard
+leads to the coloring scheme of Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Alignments-when"
+reference "tab:Table-rowcolors-2"
\end_inset
- and only with some tricks like the expected.
- The alignment of the second and third column of Table
+.
+ If odd
\begin_inset space ~
\end_inset
+row
+\begin_inset space ~
+\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Several-table-cell"
+color and/or even
+\begin_inset space ~
+\end_inset
+row
+\begin_inset space ~
\end_inset
- is not possible with
+color are left empty, no color will be used so that the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+rowcolors{1}{}{}
+\end_layout
+
+\begin_layout Standard
+deletes all colors.
+
\series bold
-dcolumn
+
+\backslash
+rowcolors
\series default
-.
+ affects all tables following that command.
\end_layout
\begin_layout Standard
-\begin_inset Newpage newpage
+\begin_inset ERT
+status open
+
+\begin_layout Plain Layout
+
+
+\backslash
+rowcolors{1}{white}{lightgray}
+\end_layout
+
\end_inset
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Alignments-when"
+name "tab:Table-rowcolors"
\end_inset
-Alignments when LaTeX-package dcolumn is used.
- For all column alignments tricks have to be used to get the output.
+Table where every second row is colored light gray.
\end_layout
\end_inset
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0" special="D{x}{\times}{-1}">
-<column alignment="center" valignment="top" width="0" special="D{x}{\times}{4.9}">
-<column alignment="center" valignment="top" width="0" special="D{+}{\,}{9.7}">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
<row>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-units
+X
\end_layout
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-units
+Y
\end_layout
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-units
+Z
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-12x24
-\begin_inset space \thinspace{}
-\end_inset
-
-bottles
+1
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-12x24
-\begin_inset space \thinspace{}
-\end_inset
-
+2
+\end_layout
-\begin_inset Formula $\mbox{bottles}$
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+3
\end_layout
\end_inset
</cell>
+</row>
+<row>
<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-12
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-times
+4
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-24+
-\begin_inset Formula $\mbox{bottles}$
-\end_inset
+\begin_layout Plain Layout
+5
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+6
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-1024x768
-\begin_inset space \thinspace{}
+7
+\end_layout
+
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-Pixels
+\begin_layout Plain Layout
+8
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-1024x768
-\begin_inset space \thinspace{}
-\end_inset
+9
+\end_layout
+\end_inset
+</cell>
+</row>
+</lyxtabular>
-\begin_inset Formula $\mbox{Pixels}$
\end_inset
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-1024
+
+\end_layout
+
+\begin_layout Standard
\begin_inset ERT
-status collapsed
+status open
\begin_layout Plain Layout
\backslash
-times
+rowcolors[
+\backslash
+hline]{1}{lightgray}{cyan}
\end_layout
\end_inset
-768+
-\begin_inset Formula $\mbox{Pixels}$
-\end_inset
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float table
+placement h
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Table-rowcolors-2"
+
+\end_inset
+Table where every second row is colored cyan and at which there is a line
+ between each row.
\end_layout
\end_inset
-</cell>
-</row>
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top" width="0pt">
<row>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-32x6
-\begin_inset space \thinspace{}
+X
+\end_layout
+
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-cm
+\begin_layout Plain Layout
+Y
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-32x6
-\begin_inset space \thinspace{}
+Z
+\end_layout
+
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+1
+\end_layout
-\begin_inset Formula $\mbox{cm}$
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+2
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+3
\end_layout
\end_inset
</cell>
+</row>
+<row>
<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-32
-\begin_inset ERT
-status collapsed
+4
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+5
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-\backslash
-times
+\begin_layout Plain Layout
+6
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+7
+\end_layout
-6+
-\begin_inset Formula $\mbox{cm}$
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+8
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+9
\end_layout
\end_inset
\end_layout
-\begin_layout Subsection
-Customized Cell/Column Format
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Customized-Format"
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+rowcolors{1}{}{}
+\end_layout
\end_inset
-\begin_inset Index
+\begin_inset Note Note
status collapsed
\begin_layout Plain Layout
-Table Customization ! Cell/Column Format
+turns off the row coloring
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Calculating the needed width for spanned columns like in section
-\begin_inset space ~
-\end_inset
-
+\begin_inset ERT
+status collapsed
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Multicolumn-Calculations"
+\begin_layout Plain Layout
-\end_inset
- is very annoying if you have several tables with multicolumn cells.
- To make life easier, you can define a cell/column format in the preamble,
- so that it can be used in all tables of the document.
- The format is defined with the command
+\backslash
+else
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-newcolumntype{name of format}[number of arguments]{commands}
-\end_layout
+\begin_inset Note Note
+status open
-\begin_layout Standard
-The format name may only consist of one letter.
- The letters
-\emph on
-b
-\emph default
-,
-\emph on
-c
-\emph default
-,
-\emph on
-l
-\emph default
-,
-\emph on
-m
-\emph default
-,
-\emph on
-p
-\emph default
- and
-\emph on
-r
-\emph default
- are predefined and cannot be used.
- But all letters are allowed as capitals.
+\begin_layout Plain Layout
+The following will be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+colortbl
+\series default
+ is not installed:
\end_layout
-\begin_layout Standard
-\begin_inset VSpace medskip
\end_inset
\end_layout
\begin_layout Standard
-For vertically and horizontally centered multicolumn cells with a fixed
- width you can define the cell format
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-newcolumntype{M}[1]{>{
-\backslash
-centering
-\backslash
-hspace{0pt}}m{#1}}
-\end_layout
-
-\begin_layout Standard
-where
+You need to install the package
\series bold
-
-\backslash
-hspace{0pt}
+colortbl
\series default
- avoids the problem of hyphenating the first word, as described in section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Multiple-Lines-in"
-
-\end_inset
-
-.
- Now you can simply enter
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-M{width}
-\end_layout
-
-\begin_layout Standard
-as LaTeX-argument in the table dialog to create a multicolumn.
-\end_layout
-
-\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-For cells spanned by a multicolumn cell, you can define the format
+ to see the content of this section in the output.
\end_layout
\begin_layout Standard
-
-\series bold
-
-\backslash
-newcolumntype{S}[2]{>{
-\backslash
-centering
-\backslash
-hspace{0pt}}
-\begin_inset Newline newline
-\end_inset
-
-
\begin_inset ERT
status collapsed
\backslash
-phantom{
+fi
\end_layout
\end_inset
-\backslash
-newcolumntype
-\begin_inset ERT
+\end_layout
+
+\begin_layout Subsection
+Colored Lines
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-}
+Table Color ! for Lines
\end_layout
\end_inset
-m{(#1+(2
-\backslash
-tabcolsep+
-\backslash
-arrayrulewidth)*(1-#2))/#2}}
-\end_layout
-
-\begin_layout Standard
-This format uses equation
-\begin_inset CommandInset ref
-LatexCommand eqref
-reference "eq:Wgn"
-
-\end_inset
- to calculate the needed width so that each spanned cell has the same width.
-\end_layout
+\begin_inset Index idx
+status collapsed
-\begin_layout Standard
-You can now enter
+\begin_layout Plain Layout
+Color ! for Table Lines
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-S{width of multicolumn cell}{number of spanned columns}
-\end_layout
-\begin_layout Standard
-as LaTeX-argument of the column.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
+As described in section
+\begin_inset space ~
\end_inset
-\end_layout
-
-\begin_layout Standard
-For colored columns, you can define
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Line-Thickness"
-\begin_layout Standard
+\end_inset
+, the line thickness for all lines in a table can be adjusted with the length
+
\series bold
\backslash
-newcolumntype{K}[1]{>{
-\backslash
-columncolor{#1}
-\backslash
-hspace{0pt}}c}
-\end_layout
-
-\begin_layout Standard
-The
-\begin_inset Quotes eld
-\end_inset
-
-c
-\begin_inset Quotes erd
+arrayrulewidth
+\series default
+.
+ It is set to 1.5
+\begin_inset space \thinspace{}
\end_inset
- at the end creates a column with a flexible width whose text is horizontally
- centered.
- You can now enter
-\end_layout
+pt for all tables of this section.
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
+\begin_layout Plain Layout
-\series bold
-K{color name}
-\end_layout
-\begin_layout Standard
-as LaTeX-argument.
+\backslash
+setlength{
+\backslash
+arrayrulewidth}{1.5pt}
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
\end_layout
\begin_layout Standard
-To create Table
+To color vertical lines for example with green, create the following column
+ format in the document preamble, according to the description in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Table-using-user-defined"
+reference "subsec:Customized-Format"
\end_inset
- use the LaTeX-arguments
+:
\end_layout
\begin_layout Standard
\series bold
-M{2.5cm}
-\end_layout
-\begin_layout Standard
-for the first column and the multicolumn,
+\backslash
+newcolumntype{W}{!{
+\backslash
+color{green}
+\backslash
+vline}}
\end_layout
\begin_layout Standard
+For Table
+\begin_inset space ~
+\end_inset
-\series bold
-K{red}
-\end_layout
-\begin_layout Standard
-for the the last column, and
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-with-vertical-colored"
-\begin_layout Standard
+\end_inset
+ the \SpecialChar LaTeX
+-argument
\series bold
-S{2.5cm}{2}
+ WcW
+\series default
+ was used for the last column and
+\series bold
+ Wc
+\series default
+ for the other columns.
\end_layout
\begin_layout Standard
-for the cells in the second column.
+If you want to have several colors, define more column formats.
\end_layout
\begin_layout Standard
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Table-using-user-defined"
+name "tab:Table-with-vertical-colored"
\end_inset
-Table using user-defined table formats
+Table with colored vertical lines
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="4">
-<features>
-<column alignment="center" valignment="middle" width="2.5cm" special="M{2.5cm}">
-<column alignment="center" valignment="middle" width="0" special="S{2.5cm}{2}">
-<column alignment="center" valignment="middle" width="0">
-<column alignment="center" valignment="middle" width="0" special="K{red}">
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" special="Wc">
+<column alignment="center" valignment="top" special="Wc">
+<column alignment="center" valignment="top" special="WcW">
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-verylongtablecellword
-\end_layout
-
-\end_inset
-</cell>
-<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none" special="M{2.5cm}">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-multiple lines multicolumn
+sd
\end_layout
\end_inset
</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-c
+
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-d
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-e
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-f
+sd
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-g
+
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-h
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-i
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-j
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-k
+sd
\end_layout
\end_inset
\end_layout
-\begin_layout Subsection
-Line Thickness
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Line-Thickness"
-
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
+To color horizontal lines for example with red, as in Table
+\begin_inset space ~
+\end_inset
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-Table Customization ! Line Thickness
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-with-horizontal-colored"
\end_inset
-
+, insert these commands in \SpecialChar TeX
+ Code before the table or table float:
\end_layout
\begin_layout Standard
-The line thickness for all lines in a table can be adjusted with the length
-
+
\series bold
\backslash
-arrayrulewidth
-\series default
-.
- To set for example a line thickness of 1.5
-\begin_inset space \thinspace{}
+let
+\backslash
+myHlineC
+\backslash
+hline
+\begin_inset Newline newline
\end_inset
-pt, like in Table
+
+\backslash
+renewcommand{
+\backslash
+hline}
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+
+\series bold
\begin_inset space ~
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Table-with-1.5"
+\end_layout
\end_inset
-, insert the command
+{
+\backslash
+arrayrulecolor{red}
+\backslash
+myHlineC
+\backslash
+arrayrulecolor{black}}
\end_layout
\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
-\series bold
\backslash
-setlength{
+let
\backslash
-arrayrulewidth}{1.5pt}
+myHlineC
+\backslash
+hline
\end_layout
-\begin_layout Standard
-in TeX-Code before the table or table float.
- The changed thickness is valid for all following tables.
- To use the default value again, set
-\series bold
+\begin_layout Plain Layout
-\backslash
-arrayrulewidth
-\series default
- to 0.4
-\begin_inset space \thinspace{}
-\end_inset
-pt in TeX-Code behind the table or table float.
+\backslash
+renewcommand{
+\backslash
+hline}
\end_layout
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
\begin_layout Plain Layout
-
+ {
\backslash
-setlength{
+arrayrulecolor{red}
\backslash
-arrayrulewidth}{1.5pt}
+myHlineC
+\backslash
+arrayrulecolor{black}}
\end_layout
\end_inset
\begin_inset Float table
+placement h
wide false
sideways false
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Table-with-1.5"
-
-\end_inset
+name "tab:Table-with-horizontal-colored"
-Table with 1.5
-\begin_inset space \thinspace{}
\end_inset
-pt thick lines
+Table with colored horizontal lines
\end_layout
\end_inset
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\end_inset
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-setlength{
-\backslash
-arrayrulewidth}{0.4pt}
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-To set the line thickness to 1.5
-\begin_inset space \thinspace{}
-\end_inset
-
-pt only for horizontal lines, like in Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Table-with-horizontal"
-
-\end_inset
-
-, insert these commands in TeX-Code before the table or table float:
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-
-\backslash
-let
-\backslash
-myHline
-\backslash
-hline
-\begin_inset Newline newline
-\end_inset
-
-
-\backslash
-renewcommand{
-\backslash
-hline}
-\begin_inset Newline newline
-\end_inset
-
- {
-\backslash
-noalign{
-\backslash
-global
-\backslash
-arrayrulewidth 1.5pt}
-\begin_inset Newline newline
-\end_inset
-
-
-\backslash
-myHline
-\backslash
-noalign{
-\backslash
-global
-\backslash
-arrayrulewidth 0.4pt}}
\end_layout
\begin_layout Standard
-To return to the default line thickness, insert this command in TeX-Code
- behind the table or table float:
+To return to the default line color black, insert this command in \SpecialChar TeX
+ Code
+ after the table or table float:
\end_layout
\begin_layout Standard
\backslash
hline}{
\backslash
-myHline}
+myHlineC}
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-let
-\backslash
-myHline
-\backslash
-hline
-\end_layout
-
-\begin_layout Plain Layout
-
-
-\backslash
-renewcommand{
-\backslash
-hline}
-\end_layout
-
-\begin_layout Plain Layout
-
- {
-\backslash
-noalign{
-\backslash
-global
-\backslash
-arrayrulewidth 1.5pt}
-\end_layout
+Table
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-
-\backslash
-myHline
-\backslash
-noalign{
-\backslash
-global
-\backslash
-arrayrulewidth 0.4pt}}
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-with-colored"
\end_inset
+ is an example with colored vertical and horizontal lines.
+\end_layout
+\begin_layout Standard
\begin_inset Float table
+placement h
wide false
sideways false
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Table-with-horizontal"
-
-\end_inset
+name "tab:Table-with-colored"
-Table with 1.5
-\begin_inset space \thinspace{}
\end_inset
-pt thick horizontal lines
+Table with colored lines
\end_layout
\end_inset
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" special="Wc">
+<column alignment="center" valignment="top" special="Wc">
+<column alignment="center" valignment="top" special="WcW">
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<row topspace="default">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
+\end_layout
+
+\begin_layout Standard
\begin_inset ERT
status collapsed
\backslash
hline}{
\backslash
-myHline}
+myHlineC}
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-To set the line thickness to 1.5
-\begin_inset space \thinspace{}
-\end_inset
+\begin_inset ERT
+status collapsed
-pt only for vertical lines, create the following column format in the document
- preamble, according to the description in section
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Customized-Format"
+\backslash
+setlength{
+\backslash
+arrayrulewidth}{0.4pt}
+\end_layout
\end_inset
-:
+
\end_layout
-\begin_layout Standard
+\begin_layout Section
+Rotated Table Cells
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Rotated-Table-Cells"
-\series bold
+\end_inset
-\backslash
-newcolumntype{V}{!{
-\backslash
-vrule width 1.5pt}}
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table ! Rotated Cells
\end_layout
-\begin_layout Standard
-For Table
-\begin_inset space ~
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Table-with-vertical"
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Rotated Material
+\end_layout
\end_inset
- the LaTeX-argument
+
\end_layout
\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
\series bold
-VcV
+Note:
+\series default
+ Not all DVI-viewers are able to display rotations.
\end_layout
-\begin_layout Standard
-was used for the last column and
-\end_layout
+\end_inset
-\begin_layout Standard
-\series bold
-Vc
\end_layout
\begin_layout Standard
-for the other columns.
+Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-with-rotated-multi"
+
+\end_inset
+
+ is an example where 3
+\begin_inset space ~
+\end_inset
+
+cells were rotated by 45
+\begin_inset space \thinspace{}
+\end_inset
+
+°.
\end_layout
\begin_layout Standard
\begin_inset Float table
+placement h
wide false
sideways false
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Table-with-vertical"
-
-\end_inset
+name "tab:Table-with-rotated"
-Table with 1.5
-\begin_inset space \thinspace{}
\end_inset
-pt thick vertical lines
+Table with rotated cells in the first row.
\end_layout
\end_inset
\end_layout
\begin_layout Plain Layout
+\noindent
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0" special="Vc">
-<column alignment="center" valignment="top" width="0" special="Vc">
-<column alignment="center" valignment="top" width="0" special="VcV">
+<lyxtabular version="3" rows="2" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" rotate="45" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+cups
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" rotate="45" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+plates
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" rotate="45" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+saucers
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+45
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-sd
+33
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+21
\end_layout
\end_inset
</cell>
</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
+</lyxtabular>
+
+\end_inset
-\begin_layout Plain Layout
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
\begin_layout Plain Layout
-sd
-\end_layout
-
-\end_inset
-</cell>
-</row>
-</lyxtabular>
+\series bold
+Note:
+\series default
+ Line breaks (shortcut
+\begin_inset Info
+type "shortcut"
+arg "newline-insert newline"
\end_inset
-
+) are not allowed in rotated cells.
\end_layout
\end_inset
\end_layout
-\begin_layout Subsection
-Dashed Lines
-\begin_inset Index
+\begin_layout Standard
+If you want to rotate table cells containing line breaks, you have to put
+ the cell content into a minipage or a parbox.
+\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-Table Customization ! Dashed Lines
-\end_layout
-
+For more about these boxes see sec.
+\begin_inset space \thinspace{}
\end_inset
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Minipages"
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
+\end_inset
-\begin_layout Plain Layout
+ and
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Parboxes"
+\end_inset
-\backslash
-ifarydshln
+.
\end_layout
\end_inset
+ If you rotate this cell by 90
+\begin_inset space \thinspace{}
+\end_inset
-\begin_inset Note Note
-status open
+° the width of the box is the height of the cell.
+ Table
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-The following section will only be displayed when the LaTeX-package
-\series bold
-arydshln
-\series default
- is installed.
-\end_layout
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-with-rotated-multi"
\end_inset
+ is an example for a rotated multiline cell where the box width was set
+ to 3
+\begin_inset space \thinspace{}
+\end_inset
+cm.
\end_layout
\begin_layout Standard
\begin_inset Float table
-placement H
wide false
sideways false
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Table-with-dashed"
+name "tab:Table-with-rotated-multi"
\end_inset
-Table with dashed lines
+Table with rotated multiline cell.
\end_layout
\end_inset
\end_layout
\begin_layout Plain Layout
+\noindent
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="5" columns="5">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0" special=":c">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="2" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rotate="90" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-b
-\end_layout
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "3cm"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+\begin_layout Plain Layout
+rotated cell
+\begin_inset Newline newline
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-c
+with line break
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-d
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-f
+b
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-g
+c
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-h
+d
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+</row>
+</lyxtabular>
+
+\end_inset
+
-\begin_layout Plain Layout
-i
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-j
+
\end_layout
+\begin_layout Section
+Table Width Calculation
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Table-Width-Calculation"
+
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\begin_inset ERT
-status collapsed
-\begin_layout Plain Layout
+\end_layout
+
+\begin_layout Standard
+For wide tables it is sometimes difficult to assure that the table does
+ not protrude over the page margin.
+ Setting a fixed width for every column of the table is the solution, but
+ what amount of space is needed for each column?
+\end_layout
+\begin_layout Standard
+The table width
+\begin_inset Formula $W_{\mathrm{table}}$
+\end_inset
+
+ can be calculated: Every column has the width of the specified column width
+
+\begin_inset Formula $W_{\mathrm{column}}$
+\end_inset
+ (that the content of the column can consume) plus two times the separation
+ between the column content and the column border (\SpecialChar LaTeX
+ length
+\series bold
+
\backslash
-hdashline
-\end_layout
+tabcolsep
+\series default
+, default 6
+\begin_inset space \thinspace{}
+\end_inset
+
+pt) plus the width of a border line (\SpecialChar LaTeX
+ length
+\series bold
+\backslash
+arrayrulewidth
+\series default
+, default 0.4
+\begin_inset space \thinspace{}
\end_inset
-k
-\end_layout
+pt): So if all
+\begin_inset Formula $n$
+\end_inset
+
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-l
-\end_layout
+columns have the same width, the table width is
+\begin_inset Formula
+\begin{equation}
+W_{\mathrm{table}}=n\left(W_{\mathrm{column}}+2\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}\right)+\backslash\mbox{arrayrulewidth}
+\end{equation}
\end_inset
-</cell>
-<cell alignment="center" valignment="top" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-m
+
\end_layout
+\begin_layout Standard
+The available width for a table is the space between the page margins or
+ the width of a text column (for a two-column document) (\SpecialChar LaTeX
+ length
+\series bold
+
+\backslash
+columnwidth
+\series default
+).
+ If all table columns should have the same width and
+\begin_inset Formula $W_{\mathrm{table}}$
\end_inset
-</cell>
-<cell alignment="center" valignment="top" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-n
-\end_layout
+ should be 1
+\begin_inset space \thinspace{}
+\end_inset
+
+\backslash
+columnwidth,
+\begin_inset Formula $W_{\mathrm{column}}$
\end_inset
-</cell>
-<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-o
+ can easily be calculated.
\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+To be able to perform calculations you need to load the \SpecialChar LaTeX
+-package
+\series bold
+calc
+\series default
-\begin_layout Plain Layout
-\begin_inset ERT
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! calc
+\end_layout
+
+\end_inset
+
+ in the document preamble.
+ To set the width in the table dialog you have to use the field
+\family sans
+\SpecialChar LaTeX
+ argument
+\family default
+.
+ The command scheme for this field is the same that is explained in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Multicolumn-Calculations"
+
+\end_inset
+.
+ For a table with 5
+\begin_inset space \thinspace{}
+\end_inset
+
+columns with an uniform width and centered text, enter there for each column
+ the command
+\end_layout
+
+\begin_layout Standard
+\series bold
+>{
\backslash
-cdashline{4-5}
+centering}p{(1
+\backslash
+columnwidth-62.4pt)/5}
\end_layout
+\begin_layout Standard
+For a table with 5
+\begin_inset space \thinspace{}
\end_inset
-p
+columns where 2 should have 0.75
+\begin_inset space ~
+\end_inset
+
+times the width than the 3 others, the calculation is
+\begin_inset Formula
+\begin{align}
+\backslash\mbox{columnwidth} & =3\,W_{\mathrm{column}}+2\cdot0.75\,W_{\mathrm{column}}+\backslash\mbox{arrayrulewidth}\nonumber \\
+ & \phantom{=\,}+5\left(2\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}\right)\nonumber \\
+ & =4.5\,W_{\mathrm{column}}+62.4\,\mathrm{pt}\nonumber \\
+W_{\mathrm{column}} & =\frac{\backslash\mbox{columnwidth}-62.4\,\mathrm{pt}}{4.5}
+\end{align}
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+In the table therefore the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+>{
+\backslash
+centering}p{(1
+\backslash
+columnwidth-62.4pt)/
+\backslash
+real{4.5}}
+\end_layout
+
+\begin_layout Standard
+is used for the wider columns and
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+>{
+\backslash
+centering}p{(1
+\backslash
+columnwidth-62.4pt)/
+\backslash
+real{4.5}*
+\backslash
+real{0.75}}
+\end_layout
+
+\begin_layout Standard
+for the smaller ones:
+\end_layout
+
+\begin_layout Standard
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}">
+<column alignment="center" valignment="top" width="0pt" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}*\real{0.75}}">
+<column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}">
+<column alignment="center" valignment="top" width="0pt" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}*\real{0.75}}">
+<column alignment="center" valignment="top" width="20col%" special=">{\centering}p{(1\columnwidth-62.4pt)/\real{4.5}}">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+1
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-q
+2
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none" special="c:">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-r
+3
\end_layout
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none" special="c:">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-s
+4
\end_layout
\end_inset
</cell>
-<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-
+5
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-t
+111111 1111111 111111 111111111 11111 11111 1111
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-u
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-v
+2222 22222 222222 222222222 2222222 22 22222
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-w
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-x
+333333 333333 333333 33333 3333333 333
\end_layout
\end_inset
\end_layout
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-LyX doesn't natively support dashed lines, so you have to use TeX-Code.
- As prerequisite the LaTeX-package
-\series bold
-arydshln
-\series default
-
-\begin_inset Index
+\begin_layout Section
+Table Customization
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! arydshln
+Table Customization
\end_layout
\end_inset
- must be loaded in the document preamble with the command
-\end_layout
-
-\begin_layout Standard
-\series bold
+\begin_inset Index idx
+status collapsed
-\backslash
-usepackage{arydshln}
+\begin_layout Plain Layout
+Table ! Customization
\end_layout
-\begin_layout Standard
-To make a vertical line dashed, enter the colon
-\begin_inset Quotes eld
-\end_inset
-
-:
-\begin_inset Quotes erd
\end_inset
- together with the character for the horizontal alignment as LaTeX-argument
- in the table cell dialog.
-\end_layout
-\begin_layout Standard
-For a horizontal dashed line add the command
\end_layout
-\begin_layout Standard
+\begin_layout Subsection
+Row Spacing
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Row-Spacing"
-\series bold
+\end_inset
-\backslash
-hdashline
-\end_layout
-\begin_layout Standard
-in TeX-Code as first element of the first cell in the table row.
-\end_layout
+\begin_inset Index idx
+status collapsed
-\begin_layout Standard
-For dashed multicolumn lines use the command
+\begin_layout Plain Layout
+Table Customization ! Row Spacing
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-cdashline{line number
-\series default
-}
\end_layout
\begin_layout Standard
-in TeX-Code as first element of the first cell in the table row.
- If you have for example a multicolumn spanning over columns 2 to 4 and
- you want to have a dashed line above, add the command
+You can add vertical space to table rows in the
+\family sans
+Borders
+\family default
+ tab of the table dialog.
+ You find there three possibilities:
\end_layout
-\begin_layout Standard
+\begin_layout Description
+Top
+\begin_inset space ~
+\end_inset
-\series bold
-
-\backslash
-cdashline{2-4}
-\end_layout
-
-\begin_layout Standard
-as first element of the first cell in the row of the multicolumn.
-\end_layout
-
-\begin_layout Standard
-\begin_inset VSpace bigskip
+of
+\begin_inset space ~
\end_inset
+row will add space above the characters of the table row.
+ If the table is a formal table
+\begin_inset Foot
+status collapsed
-\end_layout
-
-\begin_layout Standard
-Table
+\begin_layout Plain Layout
+Formal tables are explained in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Table-with-dashed"
+reference "sec:Formal-Tables"
\end_inset
- was created using
-\begin_inset Quotes eld
-\end_inset
+.
+\end_layout
+\end_inset
-\series bold
-:c
-\series default
+ \SpecialChar LyX
+ will insert as default 0.5
+\begin_inset space \thinspace{}
+\end_inset
-\begin_inset Quotes erd
+em space.
+ For normal tables the inserted space will unfortunately destroy the vertical
+ table lines as in the following table:
+\begin_inset VSpace medskip
\end_inset
- as LaTeX-argument of the third column.
- The TeX-Code command
-\series bold
-\backslash
-hdashline
-\series default
- was inserted to the first cell of the third row and the the TeX-Code command
\begin_inset Newline newline
\end_inset
-
-\series bold
-\backslash
-cdashline{4-5}
-\series default
- was inserted to the first cell of the fourth row.
-\end_layout
+\begin_inset space \hspace*{}
+\length 0pt
+\end_inset
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
-\begin_layout Plain Layout
+\begin_inset space \hfill{}
+\end_inset
-\series bold
-Note:
-\series default
- The used LaTeX-package
-\series bold
-arydshln
-\series default
- is apparently not compatible with the LaTeX-package
-\series bold
-colortbl
-\series default
-\begin_inset Index
-status collapsed
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="1">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! colortbl
+A
\end_layout
\end_inset
+</cell>
+</row>
+<row topspace="3mm">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
- that is used for colored tables in section
-\begin_inset space ~
+\begin_layout Plain Layout
+3
+\begin_inset space \thinspace{}
\end_inset
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Colored-Tables"
+mm space top of row
+\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-.
- That means colored tables cannot have dashed lines.
+\begin_layout Plain Layout
+C
\end_layout
\end_inset
+</cell>
+</row>
+</lyxtabular>
+\end_inset
-\end_layout
-
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+\begin_inset space \hfill{}
+\end_inset
-\backslash
-else
-\end_layout
+\begin_inset space \hspace*{}
+\length 0pt
\end_inset
-\begin_inset Note Note
-status open
+\begin_inset VSpace medskip
+\end_inset
-\begin_layout Plain Layout
-The following will be displayed when the LaTeX-package
-\series bold
-arydshln
-\series default
- is not installed:
-\end_layout
+\begin_inset Newline newline
\end_inset
-
+So inserting space in the top of row for normal tables is only useful when
+ you don't have vertical lines.
\end_layout
-\begin_layout Standard
-You need to install the package
-\series bold
-arydshln
-\series default
- to see the content of this section in the output.
-\end_layout
+\begin_layout Description
+Bottom
+\begin_inset space ~
+\end_inset
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
+of
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
+row will add space below the characters of the table row.
+ If the table is a formal table \SpecialChar LyX
+ will insert as default 0.5
+\begin_inset space \thinspace{}
+\end_inset
+em space, for normal tables the default size is 2
+\begin_inset space \thinspace{}
+\end_inset
-\backslash
-fi
+pt.
\end_layout
+\begin_layout Description
+Between
+\begin_inset space ~
\end_inset
+rows adds space between the current and the following row.
+ If the table is a formal table \SpecialChar LyX
+ will insert as default 0.5
+\begin_inset space \thinspace{}
+\end_inset
-\end_layout
-
-\begin_layout Chapter
-Floats
-\begin_inset Index
-status collapsed
+em space.
+ For normal tables the inserted space will unfortunately destroy the vertical
+ table lines as in the following table:
+\begin_inset VSpace medskip
+\end_inset
-\begin_layout Plain Layout
-Floats
-\end_layout
+\begin_inset Newline newline
\end_inset
-\end_layout
+\begin_inset space \hspace*{}
+\length 0pt
+\end_inset
-\begin_layout Section
-Introduction
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:FloatIntroduction"
+\begin_inset space \hfill{}
\end_inset
-\begin_inset Index
-status collapsed
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="1">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Floats ! Introduction
+A
\end_layout
\end_inset
+</cell>
+</row>
+<row interlinespace="3mm">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $\downarrow$
+\end_inset
+
+ 3
+\begin_inset space \thinspace{}
+\end_inset
+
+mm space between row
+\begin_inset Formula $\downarrow$
+\end_inset
\end_layout
-\begin_layout Standard
-A float is a block of text associated with some sort of label, which doesn't
- have a fixed location.
- It can
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-float
-\begin_inset Quotes erd
+\begin_layout Plain Layout
+\begin_inset Formula $\uparrow$
\end_inset
- forward or backward a page or two, to wherever it fits best.
-
-\family sans
-Footnotes
-\family default
- and
-\family sans
-Margin
-\begin_inset space ~
+ 3
+\begin_inset space \thinspace{}
\end_inset
-Notes
-\family default
- are also floats, because they can float to the next page when there are
- too many notes at the page.
+mm space between row
+\begin_inset Formula $\uparrow$
+\end_inset
+
+
\end_layout
-\begin_layout Standard
-Floats allow a high quality layout.
- Images and tables can evenly be spread to the pages to avoid white space
- and pages without text.
- As the floating often destroys the context between the text and the image/table
-, every float can be referenced in the text.
- Floats are therefore numbered.
- Referencing is described in section
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+</lyxtabular>
+\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Referencing-Floats"
+\begin_inset space \hfill{}
\end_inset
-.
-\end_layout
-\begin_layout Standard
-To insert a float, use the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Float
-\family default
-.
- This inserts the
-\family sans
-Caption
-\family default
- inset, a box with a label.
- The label will automatically be translated to the document language in
- the output.
- Behind the label you can insert the caption text.
- The image or table is inserted above or below the caption in a separate
- paragraph within the float.
- More about the caption placement is described in section
-\begin_inset space ~
+\begin_inset space \hspace*{}
+\length 0pt
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Caption-Placement"
-
+\begin_inset VSpace medskip
\end_inset
-.
- To keep your LyX-document readable, you can open and close the float box
- by left-clicking on the box label.
- A closed float box looks like this:
-\begin_inset Graphics
- filename clipart/floatQt4.png
- scale 70
- scaleBeforeRotation
+\begin_inset Newline newline
\end_inset
- – a gray button with a red label.
+So inserting space between rows for normal tables is only useful when you
+ don't have vertical lines.
\end_layout
\begin_layout Standard
-It is recommended to insert floats as a separate paragraph to avoid possible
- LaTeX-errors that can occur when the surrounding text is specially formatted.
+\begin_inset VSpace bigskip
+\end_inset
+
+When you want to add extra height to all cells of all tables, you can do
+ this with the following preamble lines:
\end_layout
\begin_layout Standard
-Existing figures or tables can be put into a float by marking them and then
- pressing the corresponding toolbar button for a new float.
-\end_layout
-\begin_layout Section
-Float Types
-\end_layout
+\series bold
-\begin_layout Standard
-Besides figure and table floats that are described in section
-\begin_inset space ~
+\backslash
+@ifundefined{extrarowheight}
+\begin_inset Newline newline
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Figure-Floats"
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\series bold
+\begin_inset space ~
\end_inset
- and
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Table-Floats"
+\end_layout
+
+\end_inset
+
+{
+\backslash
+usepackage{array}}{}
+\begin_inset Newline newline
\end_inset
-, respectively, LyX offers the float types
+
+\backslash
+setlength{
+\backslash
+extrarowheight}{height}
+\end_layout
+
+\begin_layout Standard
+But this has the disadvantage that the cell texts are no longer exactly
+ vertically centered.
+ (The package
\series bold
-Algorithm
+array
\series default
- and
+ will be loaded automatically by \SpecialChar LyX
+ when you use self defined table formats.
+ To avoid that it being loaded twice the command
\series bold
-Wrap
+
+\backslash
+@ifundefined
\series default
-.
+ is used in the above command.)
\end_layout
-\begin_layout Subsection
-Algorithm Floats
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Floats ! Algorithms
-\end_layout
+\begin_layout Standard
+If you are using font sizes larger than the normal size, the table borders
+ are often too close to the letters.
+ This can be corrected by inserting the command
+\series bold
+\backslash
+strut
+\series default
+ in \SpecialChar TeX
+ Code at the beginning of a table row.
+ Table
+\begin_inset space ~
\end_inset
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Vertical-alignment-of"
+
+\end_inset
+
+ illustrates the effect.
\end_layout
\begin_layout Standard
-\begin_inset Float algorithm
+\noindent
+\begin_inset Float table
placement h
wide false
sideways false
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "alg:Example-Algorithm-float"
+name "tab:Vertical-alignment-of"
\end_inset
-Example Algorithm float
+Vertical alignment of text with large font sizes.
\end_layout
\end_inset
\end_layout
-\begin_layout LyX-Code
-for I in 1..N loop
-\begin_inset Newline newline
+\begin_layout Plain Layout
+\begin_inset space \hfill{}
\end_inset
- Sum:= Sum + A(I); /*comment*/
-\begin_inset Newline newline
-\end_inset
-end loop
-\begin_inset VSpace -4mm
-\end_inset
+\begin_inset Float table
+wide false
+sideways false
+status collapsed
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+\begin_layout Plain Layout
+Normal table.
\end_layout
\end_inset
\end_layout
-\begin_layout Standard
-This float type is inserted with the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Floats\SpecialChar \menuseparator
-Algorithm
-\family default
-.
- It is used for program codes and descriptions of algorithms and can be
- seen as an alternative to program code listings that are explained in chapter
-\begin_inset space ~
-\end_inset
-
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="6" columns="1">
+<features tabularvalignment="middle">
+<column alignment="left" valignment="top">
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "cha:Program-Code-Listings"
+\begin_layout Plain Layout
+Normal, g
+\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\size large
+Large
+\end_layout
-.
- A possible environment for algorithms is the
-\family sans
-LyX-Code
-\family default
-, described in LyX's
-\emph on
-Userguide
-\emph default
-.
- Algorithm
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "alg:Example-Algorithm-float"
+\size larger
+Larger
+\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
- is an example of an algorithm float where -4
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
-mm vertical space was added at the end of the float to have the bottom rule
- exactly below the last text line.
+\size largest
+Largest
\end_layout
-\begin_layout Standard
-The float label is not automatically translated into the document language.
- If your document is not in English, you have to do this manually by adding
- the following line to the document preamble
-\series bold
-:
-\end_layout
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\begin_layout Standard
+\begin_layout Plain Layout
-\series bold
+\size huge
+Huge
+\end_layout
-\backslash
-floatname{algorithm}{your
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-name}
+\begin_layout Plain Layout
+
+\size huge
+Huger
\end_layout
-\begin_layout Standard
-where
-\family sans
-your
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+</lyxtabular>
-name
-\family default
- is the word
-\begin_inset Quotes eld
\end_inset
-\emph on
-algorithm
-\emph default
+\end_layout
-\begin_inset Quotes erd
\end_inset
- in your language.
-\end_layout
-\begin_layout Standard
-To insert the list of algorithms you can use the menu
-\family sans
-Insert\SpecialChar \menuseparator
-List
-\begin_inset space \thinspace{}
+\begin_inset space \hfill{}
\end_inset
-/
-\begin_inset space \thinspace{}
-\end_inset
-TOC\SpecialChar \menuseparator
-List of Algorithms
-\family default
- when your document has the same language as LyX's menu names.
- In other cases use this command in TeX-Code instead:
-\end_layout
+\begin_inset Float table
+wide false
+sideways false
+status collapsed
-\begin_layout Standard
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+\begin_layout Plain Layout
+Table using the command
\series bold
\backslash
-listof{algorithm}{your
-\begin_inset space ~
-\end_inset
-
-name}
+strut
+\series default
+.
\end_layout
-\begin_layout Standard
-where
-\family sans
-your
-\begin_inset space ~
\end_inset
-name
-\family default
- is the word
-\begin_inset Quotes eld
-\end_inset
+\end_layout
-\emph on
-List of Algorithm
-\emph default
-s
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="6" columns="1">
+<features tabularvalignment="middle">
+<column alignment="left" valignment="top">
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
- in your language.
+\begin_layout Plain Layout
+Normal, g
\end_layout
-\begin_layout Standard
-Algorithm floats are not by default numbered in the scheme
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-chapter.algorithm
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
- like it is the case for table and figure floats in many document-classes.
- To number algorithm floats in the same scheme, add this command to your
- document preamble:
-\end_layout
+\size large
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
+\begin_layout Plain Layout
-\series bold
\backslash
-numberwithin{algorithm}{chapter}
+strut
\end_layout
-\begin_layout Standard
-To be able to use the command
-\series bold
-
-\backslash
-numberwithin
-\series default
-, set in the tab
-\family sans
-Math
-\begin_inset space ~
-\end_inset
-
-Options
-\family default
- in the document settings the option
-\family sans
-Use
-\begin_inset space ~
\end_inset
-AMS
-\begin_inset space ~
-\end_inset
+Large
+\end_layout
-math
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-package
-\family default
-.
-\end_layout
+\begin_layout Plain Layout
-\begin_layout Subsection
-Wrap Floats
-\begin_inset Index
+\size larger
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Floats ! Wrap Floats
-\end_layout
-
-\end_inset
+\backslash
+strut
\end_layout
-\begin_layout Standard
-\begin_inset Wrap figure
-lines 0
-placement l
-overhang 1cm
-width "40col%"
-status open
-
-\begin_layout Plain Layout
-\begin_inset Graphics
- filename clipart/mobius.eps
- width 40col%
- scaleBeforeRotation
- rotateOrigin center
-
\end_inset
-
+Larger
\end_layout
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
\begin_layout Plain Layout
-\begin_inset Caption
+
+\size largest
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "fig:This-is-a"
-\end_inset
-This is a figure wrap float.
+\backslash
+strut
\end_layout
\end_inset
-
+Largest
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
- This float type is used if you want to wrap text around a figure or table
- so that it only occupies some fraction of the column width.
- It can be inserted using the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Floats\SpecialChar \menuseparator
-Figure
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-Wrap
-\begin_inset space ~
-\end_inset
+\size huge
+\begin_inset ERT
+status collapsed
-Float
-\family default
- or
-\family sans
-Table
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
+
+
+\backslash
+strut
+\end_layout
-Wrap
-\begin_inset space ~
\end_inset
-Float
-\family default
- if the LaTeX-package
-\series bold
-wrapfig
-\series default
+Huge
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! wrapfig
+
+\size giant
\begin_inset ERT
status collapsed
\backslash
-vspace{4mm}
+strut
\end_layout
\end_inset
+\size huge
+Huger
\end_layout
\end_inset
+</cell>
+</row>
+</lyxtabular>
- is installed.
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-Installing a LaTeX-package is explained it in the
-\emph on
-LaTeX
-\begin_inset space ~
\end_inset
-Configuration
-\emph default
- manual.
+
\end_layout
\end_inset
- The settings of the float can be modified by right-clicking on the float
- box.
- The mandatory settings are the float
-\family sans
-Placement
-\family default
- and its
-\family sans
-Width
-\family default
-.
- Optional are the
-\family sans
-Overhang
-\family default
- that specifies how much the float is set into the paragraph
-\begin_inset space \thinspace{}
-\end_inset
-/
-\begin_inset space \thinspace{}
+\begin_inset space \hfill{}
\end_inset
-page margin, and the
-\family sans
-Line
-\begin_inset space ~
-\end_inset
-span
-\family default
- that specifies how many text lines the float will approximately need.
- The line span is often hard to be approximated, so better only use it when
- you encounter float placement problems.
- You can furthermore decide if LaTeX is allowed to let the float float within
- the paragraph or to surrounding paragraphs.
- Figure
-\begin_inset space ~
+\end_layout
+
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "fig:This-is-a"
+\end_layout
+
+\begin_layout Subsection
+Special Cell Alignment
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Special-Cell-Alignment"
\end_inset
- is an example text wrap float with a width of 40
-\begin_inset space \thinspace{}
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table Customization ! Special Cell Alignment
+\end_layout
+
\end_inset
-col%, 1
+
+\end_layout
+
+\begin_layout Standard
+Sometimes it looks better when the cell entries of a column are aligned
+ with a special character, e.
\begin_inset space \thinspace{}
\end_inset
-cm overhang, set to the left.
-\begin_inset Foot
-status collapsed
+g.
+\begin_inset space \space{}
+\end_inset
-\begin_layout Plain Layout
-Available units are explained in appendix
+with the decimal separator as in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "cha:Units-available-in"
+reference "tab:Table-cells-align"
\end_inset
.
-\end_layout
+ This alignment is achieved by setting the cursor into the column and then
+ either pressing the toolbar button
+\begin_inset Info
+type "icon"
+arg "inset-modify tabular align-decimal"
+\end_inset
+ or setting the alignment in the table settings to
+\family sans
+At
+\begin_inset space ~
\end_inset
+Decimal
+\begin_inset space ~
+\end_inset
+Separator
+\family default
+.
+ The alignment character can be a character of your choice and is specified
+ in the table settings.
\end_layout
\begin_layout Standard
-\begin_inset Note Greyedout
+\begin_inset Float table
+placement h
+wide false
+sideways false
status open
\begin_layout Plain Layout
+\begin_inset Caption Standard
-\series bold
-Note:
-\series default
- Text
-\begin_inset space ~
-\end_inset
-
-wrap float floats are fragile! E.
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Table-cells-align"
-g.
-\begin_inset space \space{}
\end_inset
-having a figure too close to the bottom of the page can mess things up in
- the way that the float doesn't appear in the output or that it is placed
- over some other text.
+Table cells of a column aligned with the decimal separator.
\end_layout
\end_inset
\end_layout
-\begin_layout Standard
-In general:
-\end_layout
-
-\begin_layout Itemize
-Wrap floats should not be placed in paragraphs that run over a page break.
- That means that wrap floats should better be inserted to the exact place
- when the document is nearly finished and you are able to estimate where
- page breaks will appear.
-\end_layout
-
-\begin_layout Itemize
-Wrap floats should either be placed in an own paragraph before the paragraph
- where they should wrap into or within a paragraph.
-\end_layout
-
-\begin_layout Itemize
-Wrap floats in consecutive paragraphs may cause troubles, so assure that
- there is a text paragraph between them as separator.
-\end_layout
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="1">
+<features booktabs="true" tabularvalignment="middle">
+<column alignment="decimal" decimal_point="." valignment="top" width="0pt">
+<row>
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\begin_layout Itemize
-Wrap floats are not allowed in section headings or tables.
+\begin_layout Plain Layout
+heading
\end_layout
-\begin_layout Section
-Float Numbering
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Floats ! Numbering
+12.6
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+0.68
\end_layout
-\begin_layout Standard
-Floats are usually numbered either independent from the sections the floats
- are in, or in the scheme
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-chapter.number
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
+-123.0
+\end_layout
- or
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+</lyxtabular>
-section.number
-\begin_inset Quotes erd
\end_inset
-.
- This depends on the used document class.
-\end_layout
-\begin_layout Standard
-To change the section independent numbering, you can use this command in
- the document preamble:
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-renewcommand{
-\backslash
-thetable}{
-\backslash
-roman{table}}
\end_layout
\begin_layout Standard
+\begin_inset Float table
+placement h
+wide false
+sideways false
+status open
-\series bold
+\begin_layout Plain Layout
+\begin_inset Caption Standard
-\backslash
-thetable
-\series default
- is the command that prints the table number, for figure floats, the command
- would be
-\series bold
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Table-align-operator"
-\backslash
-thefigure
-\series default
-.
- The command
-\series bold
+\end_inset
-\backslash
-roman
-\series default
- prints in the command above the table number as small roman number.
+Table cells of a column aligned with the operators.
\end_layout
-\begin_layout Standard
-To change the numbering scheme for example to
-\begin_inset Quotes eld
\end_inset
-subsection.number
-\begin_inset Quotes erd
-\end_inset
-, use this command in the preamble:
\end_layout
-\begin_layout Standard
-
-\series bold
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="2">
+<features booktabs="true" tabularvalignment="middle">
+<column alignment="right" valignment="top" width="0pt">
+<column alignment="left" valignment="top" width="0pt" special="@{}l">
+<row>
+<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
-\backslash
-numberwithin{table}{subsection}
+\begin_layout Plain Layout
+heading
\end_layout
-\begin_layout Standard
-To be able to use the command
-\series bold
-
-\backslash
-numberwithin
-\series default
-, set in the tab
-\family sans
-Math
-\begin_inset space ~
\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-Options
-\family default
- in the document settings the option
-\family sans
-Use
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
+
+\end_layout
-AMS
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-math
-\begin_inset space ~
+\begin_layout Plain Layout
+\begin_inset Formula $12\,+$
\end_inset
-package
-\family default
-.
+
\end_layout
-\begin_layout Standard
-Please also have a look at section
-\begin_inset space ~
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $\,6$
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Footnote-Numbering"
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\begin_inset Formula $0\,-$
\end_inset
- for the details and important notes about the numbering commands.
+
\end_layout
-\begin_layout Section
-Referencing Floats
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Referencing-Floats"
-
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\begin_inset Formula $\,68$
+\end_inset
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-Floats ! References
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\begin_inset Formula $-123\,/$
+\end_inset
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-References ! to Floats
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $\,0$
+\end_inset
\end_layout
-\begin_layout Standard
-To reference a float, insert a label into its caption using the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Label
-\family default
- or the toolbar button
-\begin_inset Graphics
- filename ../images/label-insert.png
- scale 85
- scaleBeforeRotation
+\end_inset
+</cell>
+</row>
+</lyxtabular>
\end_inset
-.
- A grey label box like this one:
-\begin_inset Graphics
- filename clipart/labelQt4.png
- scale 85
- scaleBeforeRotation
-\end_inset
+\end_layout
- will be inserted and the label window pops up asking for the label text.
- LyX offers as text the first words of the caption with a prefix.
- The prefix depends on the float type, e.
-\begin_inset space \thinspace{}
\end_inset
-g.
-\begin_inset space \space{}
-\end_inset
-for figure floats the prefix will be "
-\family sans
-fig:
-\family default
-".
\end_layout
\begin_layout Standard
-The label is used as anchor and name for the reference.
- You can refer to the label using the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Cross-reference
-\family default
- or the toolbar button
-\begin_inset Graphics
- filename ../images/dialog-show-new-inset_ref.png
- scale 85
- scaleBeforeRotation
-
+For alignments at characters in formulas this method does not work because
+ the field to specify the alignment character does not allow formulas.
+ In this case one need to use the method from Table
+\begin_inset space ~
\end_inset
-.
- A grey cross-reference box like this one:
-\begin_inset Graphics
- filename clipart/referenceQt4.png
- scale 85
- scaleBeforeRotation
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-align-operator"
\end_inset
- will be inserted and the cross-reference window appear showing all labels
- of the document.
- If you have multiple LyX-documents opened, choose the one you are working
- on from the drop-list at the top of the dialog.
- You can now sort the labels alphabetically and then choose one.
- At the position of the cross-reference box the float number will appear
- in the output.
+.
+ This table was created with a 4×2 table.
+ The heading is a centered multicolumn.
+ The first column is right-aligned and contains the first part including
+ the operator.
+ The second column is left aligned and contains the rest.
+ A small space was added at the beginning of each cell of the second column
+ to get the space that is usually around operators.
+ To omit the space that is normally between two table columns, the following
+ \SpecialChar LaTeX
+-argument was used for the second column:
\end_layout
\begin_layout Standard
-It is recommended to use a protected space between the cross-reference name
- and its number to avoid line breaks between them.
- If a cross-reference refers to a non-existing label, you will see two question
- marks in the output instead of the reference.
-\end_layout
-\begin_layout Standard
-You can change labels at any time by clicking on the label box.
- References to the changed label will automatically change its link to the
- new label text, so that you don't need to take care about this.
+\series bold
+@{}l
\end_layout
\begin_layout Standard
-The button
-\family sans
-Go
+Table
\begin_inset space ~
\end_inset
-to
-\begin_inset space ~
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Several-table-cell"
+
\end_inset
-Label
-\family default
- in the cross-reference window sets the cursor before the referred label.
- The button text changes then to Go
+ shows some example alignments.
+ For the alignment with the relation sign, a small space was added like
+ for the second column of Table
\begin_inset space ~
\end_inset
-Back and you can use it to set the cursor back to the cross-reference.
- Right-clicking on a cross-reference box also sets the cursor before the
- referenced label but without a possibility to go back.
-\end_layout
-\begin_layout Subsection
-Cross-Reference Formats
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Cross-Reference-Formats"
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-align-operator"
\end_inset
+.
+\end_layout
-\begin_inset Index
-status collapsed
+\begin_layout Standard
+\begin_inset Float table
+placement h
+wide false
+sideways false
+status open
\begin_layout Plain Layout
-References ! Formats
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Several-table-cell"
+
+\end_inset
+
+Several table cell alignments.
\end_layout
\end_inset
\end_layout
-\begin_layout Standard
-There are six varieties of cross-references:
-\end_layout
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="6">
+<features tabularvalignment="middle">
+<column alignment="right" valignment="top">
+<column alignment="left" valignment="top" special="@{}l">
+<column alignment="right" valignment="top">
+<column alignment="left" valignment="top" special="@{}l">
+<column alignment="right" valignment="top">
+<column alignment="left" valignment="top" special="@{}l">
+<row>
+<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
-\begin_layout Description
-<reference>: prints the float number, this is the default:
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "fig:Two-distorted-images"
+\begin_layout Plain Layout
+units
+\end_layout
\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\end_layout
-\begin_layout Description
-(<reference>): prints the float number within two parentheses, this is the
- style normally used to reference formulas, especially when the reference
- name
-\begin_inset Quotes eld
\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+exponents
+\end_layout
-Equation
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
- is omitted:
-\begin_inset CommandInset ref
-LatexCommand eqref
-reference "eq:Wgn"
+\begin_layout Plain Layout
-\end_inset
+\end_layout
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+relations
\end_layout
-\begin_layout Description
-<page>: prints the page number: Page
-\begin_inset space ~
\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand pageref
-reference "fig:Two-distorted-images"
+\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+12×
\end_layout
-\begin_layout Description
-on
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
-page
-\begin_inset space ~
+\begin_layout Plain Layout
+24
+\begin_inset space \thinspace{}
\end_inset
-<page>: prints the text "on page" and the page number:
-\begin_inset CommandInset ref
-LatexCommand vpageref
-reference "fig:Two-distorted-images"
+bottles
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\begin_inset Formula $10\cdot$
\end_inset
\end_layout
-\begin_layout Description
-<reference>
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
-on
-\begin_inset space ~
+\begin_layout Plain Layout
+\begin_inset Formula $10^{\mbox{-}17}$
\end_inset
-page
-\begin_inset space ~
-\end_inset
-<page>: prints the float number, the text "on page", and the page number:
-
-\begin_inset CommandInset ref
-LatexCommand vref
-reference "fig:Two-distorted-images"
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\begin_inset Formula $\Gamma(t)\propto$
\end_inset
\end_layout
-\begin_layout Description
-Formatted
-\begin_inset space ~
\end_inset
-
-reference: prints a self defined cross-reference format.
-
-\begin_inset Note Greyedout
-status open
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+\begin_inset Formula $\:\Upsilon(t)$
+\end_inset
+
-\series bold
-Note:
-\series default
- This feature is only available when you have the LaTeX-package
-\series bold
-prettyref
-\series default
- installed.
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+1024×
\end_layout
-\begin_layout Standard
-Note that the style <page> won't print the page number if the label is on
- the previous, the same, or the next page.
- You will e.
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+768
\begin_inset space \thinspace{}
\end_inset
-g.
-\begin_inset space \space{}
+Pixels
+\end_layout
+
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-see the text
-\begin_inset Quotes eld
+\begin_layout Plain Layout
+\begin_inset Formula $5.78\cdot$
\end_inset
-\family sans
-on this page
-\family default
+\end_layout
-\begin_inset Quotes erd
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $10^{7}$
\end_inset
- instead.
-\end_layout
-\begin_layout Standard
-The number and current page of the referred document part in the output,
- is automatically calculated by LaTeX.
- The varieties are adjusted in the field
-\family sans
-Format
-\family default
- of the cross-reference window, that appear when you click on the cross-referenc
-e box.
\end_layout
-\begin_layout Subsection
-Automatic Reference Naming
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-References ! Automatic Reference Naming
+\begin_inset Formula $A\ne$
+\end_inset
+
+
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $\:B_{\mathrm{red}}$
+\end_inset
\end_layout
-\begin_layout Standard
-The LaTeX-package
-\series bold
-hyperref
-\series default
-
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! hyperref
+32×
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
-, that is enabled in the
-\family sans
-PDF Properties
-\family default
- of the
-\family sans
-Document Settings
-\family default
- dialog, provides a very useful feature that cross-references automatically
- include the name of the referenced floats (or text parts like
-\emph on
-section
-\emph default
-).
- So you will save to write e.
+\begin_layout Plain Layout
+6
\begin_inset space \thinspace{}
\end_inset
-g.
-\begin_inset space \space{}
-\end_inset
+cm
+\end_layout
-the name
-\begin_inset Quotes eld
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-Figure
-\begin_inset Quotes erd
+\begin_layout Plain Layout
+-
+\begin_inset Formula $33.5\cdot$
\end_inset
- before every reference to a figure.
- To use this feature, enable
-\series bold
-hyperref
-\series default
- and insert this line to the LaTeX preamble:
+
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $10^{4}$
+\end_inset
-\series bold
-\backslash
-AtBeginDocument{
-\backslash
-renewcommand{
-\backslash
-ref}[1]{
-\backslash
-mbox{
-\backslash
-autoref{#1}}}}
\end_layout
-\begin_layout Standard
-When you prefer other reference names than the default ones, for example
- you want instead of
-\begin_inset Quotes eld
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-section
-\begin_inset Quotes erd
+\begin_layout Plain Layout
+\begin_inset Formula $\sin(\alpha)\ge$
\end_inset
- the name
-\begin_inset Quotes eld
+
+\end_layout
+
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-sec.
-\begin_inset space \thinspace{}
+\begin_layout Plain Layout
+\begin_inset Formula $\:\sin(\beta)$
\end_inset
-\begin_inset Quotes eld
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
\end_inset
-, you can redefine the name by inserting this to the preamble:
+
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-addto
-\backslash
-extrasenglish{
-\backslash
-renewcommand{
-\backslash
-sectionautorefname}
-\begin_inset Newline newline
+\end_layout
+
+\begin_layout Subsection
+Customized Cell/Column Format
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Customized-Format"
+
\end_inset
-\begin_inset ERT
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-
-\backslash
-hphantom{ }
+Table Customization ! Cell/Column Format
\end_layout
\end_inset
-{sec.
-\backslash
-negthinspace}}
+
\end_layout
\begin_layout Standard
-When you are using another document language than English, replace
-\begin_inset Newline newline
+Calculating the required width for normal columns as described in section
+\begin_inset space ~
\end_inset
-\series bold
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Table-Width-Calculation"
-\backslash
-extrasenglish
-\series default
- by
-\series bold
+\end_inset
-\backslash
-extras***
-\series default
-, where *** is the name of the used language.
-\end_layout
+ or for spanned columns as described in section
+\begin_inset space ~
+\end_inset
-\begin_layout Standard
-To get automatic names, but not for certain reference types, for example
- not for equations, use this preamble code:
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Multicolumn-Calculations"
+
+\end_inset
+
+ is very annoying if you have several tables where a calculation is necessary.
+ To make life easier, you can define a cell/column format in the preamble,
+ that can be used in all tables of the document.
+ The format is defined with the command
\end_layout
\begin_layout Standard
\series bold
\backslash
-newlength{
-\backslash
-abc}
-\begin_inset Newline newline
-\end_inset
+newcolumntype{name of format}[number of arguments]{commands}
+\end_layout
+\begin_layout Standard
+The format name may only consist of one letter.
+ The letters
+\emph on
+b
+\emph default
+,
+\emph on
+c
+\emph default
+,
+\emph on
+l
+\emph default
+,
+\emph on
+m
+\emph default
+,
+\emph on
+p
+\emph default
+ and
+\emph on
+r
+\emph default
+ are predefined and cannot be used.
+ But all letters are allowed as capitals.
+\end_layout
-\backslash
-settowidth{
-\backslash
-abc}{
-\backslash
-space}
-\begin_inset Newline newline
+\begin_layout Standard
+\begin_inset VSpace medskip
\end_inset
+\end_layout
+
+\begin_layout Standard
+For vertically and horizontally centered multicolumn cells with a fixed
+ width you can define the cell format
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
\backslash
-addto
+newcolumntype{M}[1]{>{
\backslash
-extrasenglish{
+centering
\backslash
-renewcommand{
+hspace{0pt}}m{#1}}
+\end_layout
+
+\begin_layout Standard
+where
+\series bold
+
\backslash
-equationautorefname}
-\begin_inset Newline newline
+hspace{0pt}
+\series default
+ avoids the problem of hyphenating the first word, as described in section
+\begin_inset space ~
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Multiple-Lines-in"
-\begin_layout Plain Layout
+\end_inset
+
+.
+ Now you can simply enter
+\end_layout
+\begin_layout Standard
-\backslash
-hphantom{ }
+\series bold
+M{width}
+\end_layout
+
+\begin_layout Standard
+as
+\family sans
+\SpecialChar LaTeX
+-argument
+\family default
+ in the table dialog to create a multicolumn.
\end_layout
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
-{
-\backslash
-hspace{-
-\backslash
-abc}}
+
\end_layout
\begin_layout Standard
-More about this topic can be found in
+For cells spanned by a multicolumn cell, you can define the format
+\end_layout
+
+\begin_layout Standard
+
\series bold
-hyperref
-\series default
-'s documentation
-\begin_inset CommandInset citation
-LatexCommand cite
-key "hyperref"
+\backslash
+newcolumntype{S}[2]{>{
+\backslash
+centering
+\backslash
+hspace{0pt}}
+\begin_inset Newline newline
\end_inset
-.
-\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
+\begin_inset Phantom HPhantom
status open
\begin_layout Plain Layout
\series bold
-Note:
-\series default
- Automatic reference naming cannot be used when you use cross-references
- in the
-\family sans
-Formatted
-\begin_inset space ~
-\end_inset
-reference
-\family default
- style, as described in section
-\begin_inset space ~
+\backslash
+newcolumntype
+\end_layout
+
\end_inset
+m{(#1+(2
+\backslash
+tabcolsep+
+\backslash
+arrayrulewidth)*(1-#2))/#2}}
+\end_layout
+\begin_layout Standard
+This format uses equation
\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Cross-Reference-Formats"
+LatexCommand eqref
+reference "eq:Wgn"
\end_inset
-.
+ to calculate the required width so that each spanned cell has the same
+ width.
\end_layout
-\end_inset
+\begin_layout Standard
+You can now enter
+\end_layout
+\begin_layout Standard
+\series bold
+S{width of multicolumn cell}{number of spanned columns}
\end_layout
\begin_layout Standard
-The
-\emph on
-Math
-\emph default
- manual is an example where automatic reference naming is used.
+as \SpecialChar LaTeX
+-argument of the column.
\end_layout
-\begin_layout Subsection
-Reference Position
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Reference-Position"
-
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
-\begin_inset Index
-status collapsed
+\end_layout
-\begin_layout Plain Layout
-References ! Reference Position
+\begin_layout Standard
+For colored columns, you can define
\end_layout
-\end_inset
+\begin_layout Standard
+\series bold
+\backslash
+newcolumntype{K}[1]{>{
+\backslash
+columncolor{#1}
+\backslash
+hspace{0pt}}c}
\end_layout
\begin_layout Standard
-If you use
-\series bold
-hyperref
-\series default
+The
+\begin_inset Quotes eld
+\end_inset
-\begin_inset Index
-status collapsed
+c
+\begin_inset Quotes erd
+\end_inset
-\begin_layout Plain Layout
-LaTeX-packages ! hyperref
+ at the end creates a column with a flexible width whose text is horizontally
+ centered.
+ You can now enter
\end_layout
-\end_inset
+\begin_layout Standard
- in the
-\family sans
-PDF Properties
-\family default
- of the
-\family sans
-Document Settings
-\family default
- dialog to link cross-references in the output, you will see that clicking
- on an image float reference jumps to the image label.
- The caption will be the first text part on the screen, so that you cannot
- see the image without scrolling.
- This is because the reference link anchor is placed at the position of
- the label.
- With the use of the package
\series bold
-hypcap
-\series default
+K{color name}
+\end_layout
+
+\begin_layout Standard
+as \SpecialChar LaTeX
+-argument.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-LaTeX-packages ! hypcap
\end_layout
+\begin_layout Standard
+To create Table
+\begin_inset space ~
\end_inset
-, which is part of the LaTeX-package
-\series bold
-oberdiek
-\series default
-\begin_inset Index
-status collapsed
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-using-user-defined"
-\begin_layout Plain Layout
-LaTeX-packages ! oberdiek
+\end_inset
+
+ use the \SpecialChar LaTeX
+-arguments
\end_layout
-\end_inset
+\begin_layout Standard
-, the link anchor is placed at the beginning of a float.
- To use this feature for figure floats, load
\series bold
-hypcap
-\series default
- in the document preamble with the line
+M{2.5cm}
+\end_layout
+
+\begin_layout Standard
+for the first column and the multicolumn,
\end_layout
\begin_layout Standard
\series bold
+K{red}
+\end_layout
-\backslash
-usepackage[figure]{hypcap}
+\begin_layout Standard
+for the last column, and
\end_layout
\begin_layout Standard
-You can also use
-\series bold
-hypcap
-\series default
- for all float types but this is not recommended for stability reasons.
- For more information, have a look at
-\series bold
-hypcap
-\series default
-'s manual
-\begin_inset CommandInset citation
-LatexCommand cite
-key "hypcap"
-\end_inset
+\series bold
+S{2.5cm}{2}
+\end_layout
-.
+\begin_layout Standard
+for the cells in the second column.
\end_layout
\begin_layout Standard
-\begin_inset Note Greyedout
+\begin_inset Float table
+placement h
+wide false
+sideways false
status open
\begin_layout Plain Layout
+\begin_inset Caption Standard
-\series bold
-Note:
-\series default
-
-\series bold
-hypcap
-\series default
- has no effect for references to subfigures.
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Table-using-user-defined"
+
+\end_inset
+
+Table using user-defined table formats
\end_layout
\end_inset
\end_layout
-\begin_layout Section
-Float Placement
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Float-Placement"
-
-\end_inset
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="4">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="middle" width="2.5cm" special="M{2.5cm}">
+<column alignment="center" valignment="middle" special="S{2.5cm}{2}">
+<column alignment="center" valignment="middle">
+<column alignment="center" valignment="middle" special="K{red}">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+verylongtablecellword
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none" special="M{2.5cm}">
+\begin_inset Text
\begin_layout Plain Layout
-Floats ! Placement
+multiple lines multicolumn
\end_layout
\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\end_layout
-\begin_layout Standard
-Right-clicking on a float-box opens a dialog where you can alter the placement
- options that LaTeX uses for positioning the float.
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+c
+\end_layout
-The option
-\family sans
-Span
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+d
+\end_layout
-columns
-\family default
- is only useful for two-column documents: If you select it, the float will
- span across both columns on the page instead of being confined to just
- one.
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+e
+\end_layout
-The option
-\family sans
-Rotate
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-sideways
-\family default
- is used to rotate floats, see section
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Rotated-Floats"
+\begin_layout Plain Layout
+f
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-.
+\begin_layout Plain Layout
+g
\end_layout
-\begin_layout Standard
-You can use one ore more of the following options in the float dialog to
- set the placement for a particular float when you uncheck the option
-\family sans
-Use
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+h
+\end_layout
-default
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-placement
-\family default
-:
+\begin_layout Plain Layout
+i
\end_layout
-\begin_layout Description
-Here
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+j
+\end_layout
-if
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-possible try to place the float on the position where it is inserted
+\begin_layout Plain Layout
+k
\end_layout
-\begin_layout Description
-Top
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+</lyxtabular>
-of
-\begin_inset space ~
\end_inset
-page try to place the float on the top of the current page
+
\end_layout
-\begin_layout Description
-Bottom
-\begin_inset space ~
\end_inset
-of
-\begin_inset space ~
-\end_inset
-page try to place the float on the bottom of the current page
\end_layout
-\begin_layout Description
-Page
-\begin_inset space ~
+\begin_layout Subsection
+Line Thickness
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Line-Thickness"
+
\end_inset
-of
-\begin_inset space ~
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table Customization ! Line Thickness
+\end_layout
+
\end_inset
-floats try to place the float on an own page
+
\end_layout
\begin_layout Standard
-The order of the above option is
-\emph on
-always
-\emph default
- used by LaTeX.
- That means, if you use the default placement, LaTeX will first try out
+The line thickness for all lines in a table can be adjusted with the length
-\family sans
-Here
-\begin_inset space ~
-\end_inset
+\series bold
-if
-\begin_inset space ~
+\backslash
+arrayrulewidth
+\series default
+.
+ To set for example a line thickness of 1.5
+\begin_inset space \thinspace{}
\end_inset
-possible
-\family default
-, then
-\family sans
-Top
+pt, as in Table
\begin_inset space ~
\end_inset
-of
-\begin_inset space ~
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-with-1.5"
+
\end_inset
-page
-\family default
-, and then the others.
- If you don't use the default, LaTeX will try only the checked options but
- in the same order.
- If none of the 4 placements are possible the procedure is internally repeated
- but it is tried to put the float on the following page.
+, insert the command
\end_layout
\begin_layout Standard
-By default, each option has its own rules:
-\end_layout
-
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-\family sans
-Top
-\begin_inset space ~
-\end_inset
-
-of
-\begin_inset space ~
-\end_inset
+\series bold
-page
-\family default
- only floats occupying less than 70
-\begin_inset space \thinspace{}
-\end_inset
+\backslash
+setlength{
+\backslash
+arrayrulewidth}{1.5pt}
+\end_layout
-% of the page can be placed at the top of a page (
+\begin_layout Standard
+in \SpecialChar TeX
+ Code before the table or table float.
+ The changed thickness is valid for all subsequent tables.
+ To use the default value again, set
\series bold
\backslash
-topfraction
+arrayrulewidth
\series default
-)
-\end_layout
-
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-
-\family sans
-Bottom
-\begin_inset space ~
-\end_inset
-
-of
-\begin_inset space ~
-\end_inset
-
-page
-\family default
-: only floats occupying less than 30
+ to 0.4
\begin_inset space \thinspace{}
\end_inset
-% of the page can be placed at the bottom of a page.
- (
-\series bold
-
-\backslash
-bottomfraction
-\series default
-)
+pt in \SpecialChar TeX
+ Code after the table or table float.
\end_layout
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-
-\family sans
-Page
-\begin_inset space ~
-\end_inset
-
-of
-\begin_inset space ~
-\end_inset
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
-floats
-\family default
-: only if more than 50
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
-% of the page are occupied by floats, several floats can be set together
- on a page.
- (
-\series bold
\backslash
-floatpagefraction
-\series default
-)
+setlength{
+\backslash
+arrayrulewidth}{1.5pt}
\end_layout
-\begin_layout Standard
-If you don't like these rules, you can ignore them by using the additional
- option
-\family sans
-Ignore
-\begin_inset space ~
-\end_inset
-
-LaTeX
-\begin_inset space ~
-\end_inset
-
-rules
-\family default
-.
-\begin_inset Newline newline
\end_inset
-You can also redefine the rules with LaTeX-commands that are given in parenthese
-s behind the rules description above.
- To increase for example the often too small default of the bottom-rule
- to 50
-\begin_inset space \thinspace{}
-\end_inset
-
-% of the page, add this line to your document preamble:
-\end_layout
-
-\begin_layout Standard
-\series bold
+\begin_inset Float table
+wide false
+sideways false
+status open
-\backslash
-renewcommand{
-\backslash
-bottomfraction}{0.5}
-\end_layout
+\begin_layout Plain Layout
+\begin_inset Caption Standard
-\begin_layout Standard
-Sometimes you might need, under all circumstances, a float to be placed
- exactly at the position where it is inserted.
- For this case you can use the option
-\family sans
-Here
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Table-with-1.5"
-definitely
-\family default
-.
- Use this option very rarely and only if the document is nearly ready to
- be printed.
- Because the float is then no longer able to
-\begin_inset Quotes eld
\end_inset
-float
-\begin_inset Quotes erd
+Table with 1.5
+\begin_inset space \thinspace{}
\end_inset
- when you change your document and this will often destroy the page layout.
+pt thick lines
\end_layout
-\begin_layout Standard
-There are no placement options for text wrap floats, because they are always
- surrounded by the text of a certain paragraph.
-\begin_inset VSpace bigskip
\end_inset
\end_layout
-\begin_layout Standard
-Sometimes you have the problem that a float is placed at the top of a page
- while its corresponding section starts at the middle of the page, so that
- the reader could think the float is part of the previous section.
- To avoid this the LaTeX-command
-\series bold
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-suppressfloats
-\series default
- can be used.
- It suppresses a given float placement for the page where it is inserted
- and can therefore be used to avoid that floats could be set before a section
- starts.
- To get this, add these commands to your document preamble:
+\begin_layout Plain Layout
+sd
\end_layout
-\begin_layout Standard
-
-\series bold
-
-\backslash
-let
-\backslash
-mySection
-\backslash
-section
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
-\backslash
-renewcommand{
-\backslash
-section}{
-\backslash
-suppressfloats[t]
-\backslash
-mySection}
-\end_layout
-
-\begin_layout Standard
-You can define the same for all section headings, like chapters and subsections.
- This definition is not recommended to be used for small text parts like
- subsubsections because LaTeX may then have problems to find a suitable
- placement.
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-
-In some cases it is required to have all figures/tables at the end of the
- document.
- For this purpose the LaTeX-package
-\series bold
-endfloat
-\series default
-
-\begin_inset Index
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! endfloat
-\end_layout
-\end_inset
+\end_layout
- was developed.
- It puts all figure and table floats at the end of the document into own
- sections.
- At the original float position a text hint like
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
-\family sans
-[Figure
-\begin_inset space ~
-\end_inset
-
-3.2 about here.]
-\family default
+\end_layout
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
- is inserted.
- The endfloat-package is loaded in the preamble with the line
+\begin_layout Plain Layout
+sd
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\series bold
+\begin_layout Plain Layout
-\backslash
-usepackage[options]{endfloat}
\end_layout
-\begin_layout Standard
-There are various package options to format the created figure/table sections.
- For more information we refer to the
-\series bold
-endfloat
-\series default
- documentation
-\begin_inset CommandInset citation
-LatexCommand cite
-key "endfloat"
-
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-.
-\begin_inset Newline newline
-\end_inset
+\begin_layout Plain Layout
+\end_layout
-\begin_inset Note Greyedout
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\series bold
-Note: endfloat
-\series default
- doesn't provide an automatic translation for the text hint, you have to
- do this manually, see section
-\begin_inset space ~
-\end_inset
-
-4 in
-\begin_inset CommandInset citation
-LatexCommand cite
-key "endfloat"
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-.
+\begin_layout Plain Layout
+sd
\end_layout
\end_inset
+</cell>
+</row>
+</lyxtabular>
-
-\begin_inset Newline newline
\end_inset
-\begin_inset Note Greyedout
-status open
-
-\begin_layout Plain Layout
+\end_layout
-\series bold
-Note:
-\series default
- There is currently a bug in
-\series bold
-endfloat
-\series default
- when the caption contains a German
-\begin_inset Quotes eld
\end_inset
-ß
-\begin_inset Quotes erd
-\end_inset
-.
- Use in this case the command
-\begin_inset Quotes eld
-\end_inset
+\begin_inset ERT
+status collapsed
+\begin_layout Plain Layout
-\series bold
\backslash
-ss
-\series default
-
-\begin_inset Quotes erd
-\end_inset
-
- in TeX-Code instead of
-\begin_inset Quotes eld
-\end_inset
-
-ß
-\begin_inset Quotes erd
-\end_inset
-
-.
+setlength{
+\backslash
+arrayrulewidth}{0.4pt}
\end_layout
\end_inset
\begin_inset VSpace bigskip
\end_inset
-For more details about float placements, have a look at LaTeX books,
-\begin_inset CommandInset citation
-LatexCommand cite
-key "latexcompanion,latexguide,latexbook"
+To set the line thickness to 1.5
+\begin_inset space \thinspace{}
+\end_inset
+pt only for horizontal lines, as in Table
+\begin_inset space ~
\end_inset
-.
-\end_layout
-\begin_layout Section
-Rotated Floats
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Rotated-Floats"
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-with-horizontal"
\end_inset
+, insert these commands in \SpecialChar TeX
+ Code before the table or table float:
+\end_layout
-\begin_inset Index
-status collapsed
+\begin_layout Standard
-\begin_layout Plain Layout
-Floats ! Rotating
-\end_layout
+\series bold
+\backslash
+let
+\backslash
+myHline
+\backslash
+hline
+\begin_inset Newline newline
\end_inset
-\end_layout
+\backslash
+renewcommand{
+\backslash
+hline}
+\begin_inset Newline newline
+\end_inset
-\begin_layout Standard
-Especially for wide tables you might have floats rotated.
- To rotate a whole float including the caption, right-click on the float-box
- and use the option
-\family sans
-Rotate
-\begin_inset space ~
+ {
+\backslash
+noalign{
+\backslash
+global
+\backslash
+arrayrulewidth 1.5pt}
+\begin_inset Newline newline
\end_inset
-sideways
-\family default
-.
+
+\backslash
+myHline
+\backslash
+noalign{
+\backslash
+global
+\backslash
+arrayrulewidth 0.4pt}}
+\end_layout
+
+\begin_layout Standard
+To return to the default line thickness, insert this command in \SpecialChar TeX
+ Code after
+ the table or table float:
\end_layout
\begin_layout Standard
-Rotated floats are always placed on its own page (or column, in case you
- have a multi-column document).
- You can let them span several columns using the float settings option
-\family sans
-Span
-\begin_inset space ~
-\end_inset
-columns
-\family default
-.
- Floats are rotated so that you can read them from the outside margin.
- To force a certain rotation direction for all pages, you can add either
- the option
-\series bold
-figuresleft
-\series default
- or
\series bold
-figuresright
-\series default
- to the document class options.
+
+\backslash
+renewcommand{
+\backslash
+hline}{
+\backslash
+myHline}
\end_layout
\begin_layout Standard
-Referencing rotated floats is the same like for normal floats, the caption
- format is also the same: Table
-\begin_inset space ~
-\end_inset
+\begin_inset ERT
+status collapsed
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Rotated-table"
-\end_inset
+\backslash
+let
+\backslash
+myHline
+\backslash
+hline
+\end_layout
- is an example of a rotated table float.
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+hline}
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\begin_layout Plain Layout
+
+ {
+\backslash
+noalign{
+\backslash
+global
+\backslash
+arrayrulewidth 1.5pt}
+\end_layout
\begin_layout Plain Layout
-\series bold
-Note:
-\series default
- Not all DVI-viewers are able to display rotated floats.
+
+\backslash
+myHline
+\backslash
+noalign{
+\backslash
+global
+\backslash
+arrayrulewidth 0.4pt}}
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Standard
\begin_inset Float table
wide false
-sideways true
+sideways false
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Rotated-table"
+name "tab:Table-with-horizontal"
\end_inset
- Rotated table
+Table with 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+pt thick horizontal lines
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="1" columns="5">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-test
+sd
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-b
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-c
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-d
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-e
+sd
\end_layout
\end_inset
</cell>
-</row>
-</lyxtabular>
-
-\end_inset
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\end_layout
-\begin_layout Section
-Subfloats
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Floats ! Subfloats
+
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+sd
\end_layout
-\begin_layout Standard
-Subfloats are for example used when a figure consists of several images.
- They are created by inserting a float to an existing float.
- The placement of the subfloats can be controlled like for paragraphs as
- shown in table
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+</lyxtabular>
+\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Two-subtables-side"
+
+\end_layout
\end_inset
- and
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Two-subtables-upon"
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+hline}{
+\backslash
+myHline}
+\end_layout
\end_inset
-.
+
\end_layout
\begin_layout Standard
-Referencing subfloats works as for normal floats: Table
+\begin_inset VSpace bigskip
+\end_inset
+
+To set the line thickness to 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+pt only for vertical lines, create the following column format in the document
+ preamble, according to the description in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:This-is-subtable-a"
+reference "subsec:Customized-Format"
\end_inset
- and
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:This-is-subtable-b"
+:
+\end_layout
-\end_inset
+\begin_layout Standard
- are subtables of table
+\series bold
+
+\backslash
+newcolumntype{V}{!{
+\backslash
+vrule width 1.5pt}}
+\end_layout
+
+\begin_layout Standard
+For Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Two-subtables-side"
+reference "tab:Table-with-vertical"
\end_inset
-.
+ the \SpecialChar LaTeX
+-argument
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+VcV
+\end_layout
+
+\begin_layout Standard
+was used for the last column and
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+Vc
+\end_layout
+
+\begin_layout Standard
+for the other columns.
\end_layout
\begin_layout Standard
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:Two-subtables-side"
+name "tab:Table-with-vertical"
\end_inset
-Two subtables placed side by side.
+Table with 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+pt thick vertical lines
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
-\begin_inset space \hfill{}
-\end_inset
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" special="Vc">
+<column alignment="center" valignment="top" special="Vc">
+<column alignment="center" valignment="top" special="VcV">
+<row>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+sd
+\end_layout
-\begin_inset Float table
-wide false
-sideways false
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:This-is-subtable-a"
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
-This is subtable a.
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="1" columns="5">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-test
+sd
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-b
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-c
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-d
+
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-e
+sd
\end_layout
\end_inset
\end_inset
-\begin_inset space \hfill{}
+\end_layout
+
+\begin_layout Subsection
+Dashed Lines
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table Customization ! Dashed Lines
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+ifarydshln
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following section will only be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+arydshln
+\series default
+ is installed.
+\end_layout
+
\end_inset
+\end_layout
+
+\begin_layout Standard
\begin_inset Float table
+placement H
wide false
sideways false
-status collapsed
+status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:This-is-subtable-b"
+name "tab:Table-with-dashed"
\end_inset
-This is subtable b.
+Table with dashed lines
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="1" columns="5">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="5" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top" special=":c">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-e
+a
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-d
+b
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\begin_inset Text
\begin_layout Plain Layout
-b
+d
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-test
+e
\end_layout
\end_inset
</cell>
</row>
-</lyxtabular>
-
-\end_inset
-
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+f
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
-\begin_inset space \hfill{}
-\end_inset
-
-
+\begin_layout Plain Layout
+g
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+h
\end_layout
-\begin_layout Standard
-\begin_inset Float table
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Two-subtables-upon"
+i
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-Two subtables placed one upon the other.
- (a) table with 4 cells, (b) table with 5 cells.
+\begin_layout Plain Layout
+j
\end_layout
\end_inset
-
-
-\end_layout
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\align center
-\begin_inset Float table
-wide false
-sideways false
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-\begin_inset Caption
-\begin_layout Plain Layout
+\backslash
+hdashline
\end_layout
\end_inset
-
+k
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="1" columns="4">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-test
+l
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-test
+m
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-test
+n
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-test
+o
\end_layout
\end_inset
</cell>
</row>
-</lyxtabular>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\end_inset
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+\backslash
+cdashline{4-5}
\end_layout
\end_inset
-
+p
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Float table
-wide false
-sideways false
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+q
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none" special="c:">
+\begin_inset Text
\begin_layout Plain Layout
+r
+\end_layout
+
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+s
\end_layout
\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="1" columns="5">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+\end_inset
+</cell>
+</row>
<row>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-a
+t
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-b
+u
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-c
+v
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-d
+w
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-e
+x
\end_layout
\end_inset
\end_layout
-\end_inset
-
-
-\end_layout
+\begin_layout Standard
+\SpecialChar LyX
+ does not natively support dashed lines, so you have to use \SpecialChar TeX
+ Code.
+ As a prerequisite the \SpecialChar LaTeX
+ package
+\series bold
+arydshln
+\series default
-\begin_layout Section
-Floats Side by Side
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Floats ! Side by side
+\SpecialChar LaTeX
+-packages ! arydshln
\end_layout
\end_inset
-
+ must be loaded in the document preamble with the command
\end_layout
\begin_layout Standard
-To place floats side by side, like for Figure
-\begin_inset space ~
-\end_inset
+\series bold
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "fig:Float-left"
+\backslash
+usepackage{arydshln}
+\end_layout
+\begin_layout Standard
+To make a vertical line dashed, enter the colon
+\begin_inset Quotes eld
\end_inset
- and
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "fig:Float-right"
-
+:
+\begin_inset Quotes erd
\end_inset
-, only
-\emph on
-one
-\emph default
- float is used.
- In it two minipage boxes are inserted.
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-Minipages are explained in section
-\begin_inset space ~
-\end_inset
+ together with the character for the horizontal alignment as \SpecialChar LaTeX
+ argument in
+ the table cell dialog.
+\end_layout
+\begin_layout Standard
+For a horizontal dashed line add the command
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Minipages"
+\begin_layout Standard
-\end_inset
+\series bold
-.
+\backslash
+hdashline
\end_layout
-\end_inset
+\begin_layout Standard
+in \SpecialChar TeX
+ Code as first element of the first cell in the table row.
+\end_layout
- The width is set to 45
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Standard
+For dashed multicolumn lines use the command
+\end_layout
--50
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Standard
-column% and the box alignment to
-\family sans
-Bottom
-\family default
- for each minipage.
- The minipage boxes contain the image and the caption in the same way as
- they are in a float.
- The only difference is that the image unit
-\family sans
-Column
-\begin_inset space ~
-\end_inset
+\series bold
-Width
-\begin_inset space ~
-\end_inset
+\backslash
+cdashline{line number
+\series default
+}
+\end_layout
-%
-\family default
- is now calculated according to the width of the minipage boxes.
+\begin_layout Standard
+in \SpecialChar TeX
+ Code as the first element of the first cell in the table row.
+ If you have for example a multicolumn spanning columns 2 to 4 and you want
+ to have a dashed line above, add the command
\end_layout
\begin_layout Standard
-\begin_inset Float figure
-wide false
-sideways false
-status open
-\begin_layout Plain Layout
-\begin_inset Box Frameless
-position "b"
-hor_pos "c"
-has_inner_box 1
-inner_pos "t"
-use_parbox 0
-width "45col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
+\series bold
-\begin_layout Plain Layout
-\align center
-\begin_inset Graphics
- filename clipart/mobius.eps
- lyxscale 50
- width 100col%
- scaleBeforeRotation
+\backslash
+cdashline{2-4}
+\end_layout
+
+\begin_layout Standard
+as the first element of the first cell in the row of the multicolumn.
+\end_layout
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
\end_layout
-\begin_layout Plain Layout
-\begin_inset Caption
+\begin_layout Standard
+Table
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "fig:Float-left"
-\end_inset
-
-Float on the left side.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
-\begin_inset space \hfill{}
-\end_inset
-
-
-\begin_inset Box Frameless
-position "b"
-hor_pos "c"
-has_inner_box 1
-inner_pos "t"
-use_parbox 0
-width "45col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
-
-\begin_layout Plain Layout
-\align center
-\begin_inset Graphics
- filename clipart/platypus.eps
- lyxscale 50
- width 100col%
- scaleBeforeRotation
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "fig:Float-right"
-
-\end_inset
-
-Float on the right side.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Section
-Caption Formatting
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Caption ! Formatting
-\end_layout
-
-\end_inset
-
-
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Floats ! Caption Formatting
-\end_layout
-
-\end_inset
-
-
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Caption-Formatting"
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-The
-\family sans
-Caption
-\family default
- environment is the default paragraph environment for
-\family sans
-Floats
-\family default
-.
- On the LyX screen captions appear as label, e.
-\begin_inset space \thinspace{}
-\end_inset
-
-g.
-\begin_inset space \space{}
-\end_inset
-
-
-\begin_inset Quotes eld
-\end_inset
-
-
-\family sans
-Figure #:
-\family default
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Table-with-dashed"
-\begin_inset Quotes erd
\end_inset
- followed by the caption text.
-
+ was created using
\begin_inset Quotes eld
\end_inset
-#
-\begin_inset Quotes erd
-\end_inset
-
- is the actual reference number.
- By default the label and the number are in the same font as the caption
- text and a colon follows the number to divide the label from the text.
- This caption format is not suitable for all document formats.
-
-\end_layout
-\begin_layout Standard
-To change the default caption format, load the LaTeX-package
\series bold
-caption
+:c
\series default
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-LaTeX-packages ! caption
-\end_layout
-
+\begin_inset Quotes erd
\end_inset
- in the document preamble with this line:
-\end_layout
-
-\begin_layout Standard
-
+ as \SpecialChar LaTeX
+ argument of the third column.
+ The \SpecialChar TeX
+ Code command
\series bold
\backslash
-usepackage[format definition]{caption}
-\end_layout
-
-\begin_layout Standard
-To have for example the label and the number in sans-serif bold font and
- the table captions always above the table like in this document, use the
- following command:
-\end_layout
-
-\begin_layout Standard
+hdashline
+\series default
+ was inserted in the first cell of the third row and the \SpecialChar TeX
+ Code command
+\begin_inset Newline newline
+\end_inset
+
\series bold
\backslash
-usepackage[labelfont={bf,sf}, tableposition=top]{caption}
-\end_layout
-
-\begin_layout Standard
-You can also define different caption formats for the different float types.
- In this case load the
-\series bold
-caption
+cdashline{4-5}
\series default
- package without format specific options and define the different formats
- with the help of the command
+ was inserted in the first cell of the fourth row.
\end_layout
\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
-\series bold
-\backslash
-captionsetup[float type]{format definition}
\end_layout
\begin_layout Standard
-in the document preamble.
- For example the caption formats of Figure
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "fig:This-is-an-fig"
-
-\end_inset
-
- and Table
+Tables with dashed lines can also be colored as shown by Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:This-is-an-tab"
+reference "tab:Colored-table-with"
\end_inset
- can be created using these commands in the document preamble:
+.
\end_layout
\begin_layout Standard
-
-\series bold
-
-\backslash
-usepackage[tableposition=top]{caption}
-\series default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\series bold
-
-\backslash
-captionsetup[figure]{labelfont={tt}, textfont=it, indention=1cm,%
-\begin_inset Newline newline
-\end_inset
-
-
\begin_inset ERT
status collapsed
\backslash
-hphantom{
-\backslash
-
-\backslash
-captionsetup[figure]
+setlength{
\backslash
-{}
+arrayrulewidth}{1pt}
\end_layout
\end_inset
- labelsep=period}
-\begin_inset Newline newline
-\end_inset
-
-
-\backslash
-captionsetup[table]{labelfont={bf,sf}}
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
-
-\begin_layout Plain Layout
-
-\series bold
-Note:
-\series default
- The option
-\series bold
-tableposition=top
-\series default
- has no effect when a
-\series bold
-KOMA-script
-\series default
-\begin_inset Index
+\begin_inset Note Note
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! KOMA-script
-\end_layout
-
-\end_inset
-
- document class is used.
- In this case the document class option
-\series bold
-tablecaptionabove
-\series default
- must be used.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-For more information about the package
-\series bold
-caption
-\series default
- we refer to its documentation
-\begin_inset CommandInset citation
-LatexCommand cite
-key "caption"
-
-\end_inset
-
-.
+thicker lines for better visualization of the line color
\end_layout
-\begin_layout Standard
-To change the label name from e.
-\begin_inset space \thinspace{}
-\end_inset
-
-g.
-\begin_inset space \space{}
-\end_inset
-
-
-\begin_inset Quotes eld
-\end_inset
-
-Figure
-\begin_inset Quotes erd
-\end_inset
-
- to
-\begin_inset Quotes eld
\end_inset
-Image
-\begin_inset Quotes erd
-\end_inset
- use this preamble command:
\end_layout
\begin_layout Standard
+\begin_inset ERT
+status collapsed
-\series bold
-
-\backslash
-renewcommand{
-\backslash
-fnum@figure}{Image~
-\backslash
-thefigure}
-\end_layout
+\begin_layout Plain Layout
-\begin_layout Standard
-where
-\series bold
\backslash
-thefigure
-\series default
- inserts the figure number and
-\series bold
-
-\begin_inset Quotes eld
-\end_inset
-
-~
-\series default
-
-\begin_inset Quotes erd
-\end_inset
-
- creates a protected space.
+dashgapcolor{green}
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-If you are using a
-\series bold
-KOMA-script
-\series default
-\begin_inset Index
+\begin_inset Note Note
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! KOMA-script
+color gaps between dashes green
\end_layout
\end_inset
- document class (
-\family sans
-article (KOMA-script)
-\family default
-,
-\family sans
-book (KOMA-script)
-\family default
-,
-\family sans
-letter (KOMA-script)
-\family default
-, or
-\family sans
-report (KOMA-script)
-\family default
-
-\begin_inset space \thinspace{}
-\end_inset
-
-), you can alternatively to the
-\series bold
-caption
-\series default
- package use
-\series bold
-KOMA-script
-\series default
-'s built-in command
-\series bold
-\backslash
-setkomafont
-\series default
-.
- For example, to have the caption label in bold, add this command to your
- document preamble:
\end_layout
\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
-\series bold
\backslash
-setkomafont{captionlabel}{
+let
\backslash
-bfseries}
+myHdashline
+\backslash
+hdashline
\end_layout
-\begin_layout Standard
-For more information about
-\series bold
-
-\backslash
-setkomafont
-\series default
- we refer to the
-\series bold
-KOMA-script
-\series default
- documentation
-\begin_inset CommandInset citation
-LatexCommand cite
-key "KOMA-script"
+\begin_layout Plain Layout
-\end_inset
-.
+\backslash
+renewcommand{
+\backslash
+hdashline}
\end_layout
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
\begin_layout Plain Layout
-
+ {
\backslash
-captionsetup[figure]{labelfont={tt}, textfont=it, indention=1cm, labelsep=period
-}
+arrayrulecolor{red}
+\backslash
+myHdashline
+\backslash
+arrayrulecolor{black}}
\end_layout
\end_inset
\begin_inset Note Note
-status open
+status collapsed
\begin_layout Plain Layout
-The caption format is changed only for this example.
+color horizontal, dashed lines red
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset Float figure
-placement !p
-wide false
-sideways false
-status open
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\align center
-\begin_inset Graphics
- filename clipart/mobius.eps
- lyxscale 50
- scale 50
- scaleBeforeRotation
-
-\end_inset
+\backslash
+let
+\backslash
+myCdashline
+\backslash
+cdashline
\end_layout
\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "fig:This-is-an-fig"
-\end_inset
-This is an example figure caption that is longer than one line to show the
- different caption format.
- Here a self-defined caption format is used.
+\backslash
+renewcommand{
+\backslash
+cdashline}[1]
\end_layout
-\end_inset
-
+\begin_layout Plain Layout
+ {
+\backslash
+arrayrulecolor{yellow}
+\backslash
+myCdashline{#1}
+\backslash
+arrayrulecolor{black}}
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Standard
-\begin_inset ERT
+\begin_inset Note Note
status collapsed
\begin_layout Plain Layout
-
-
-\backslash
-captionsetup[figure]{labelfont={bf,sf}, textfont=rm, indention=0cm, labelsep=col
-on}
+color partial horizontal, dashed lines yellow
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float table
-placement !p
+placement h
wide false
sideways false
status open
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "tab:This-is-an-tab"
+name "tab:Colored-table-with"
\end_inset
-This is an example table caption that is longer than one line to show the
- different caption format.
- Here the standard caption format for tables in this document is used.
+Colored table with dashed lines
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="1" columns="5">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="5" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt" special=">{\columncolor{darkgreen}\centering}c">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt" special=":c">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
</row>
-</lyxtabular>
-
-\end_inset
-
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+f
\end_layout
\end_inset
-
-
-\end_layout
-
-\begin_layout Section
-Caption Placement
-\begin_inset Index
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Caption ! Placement
+g
\end_layout
\end_inset
-
-
-\begin_inset Index
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Floats ! Caption Placement
+h
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Caption-Placement"
-
-\end_inset
-
-
+\begin_layout Plain Layout
+i
\end_layout
-\begin_layout Standard
-The common caption placement rule is:
-\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\begin_layout Description
-Figure: Caption is set below the figure
+\begin_layout Plain Layout
+j
\end_layout
-\begin_layout Description
-Table: Caption is set above the table
-\end_layout
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
-\begin_layout Standard
-Having the caption above the table is unfortunately not supported in LaTeX's
- standard classes.
- That means if you are using the document classes
-\family sans
-article
-\family default
-,
-\family sans
-book
-\family default
-,
-\family sans
-letter
-\family default
-, or
-\family sans
-report
-\family default
- there will be no space between the caption and the table.
- To insert the needed space, add the following option to the load command
- of the LaTeX-package
-\series bold
-caption
-\series default
- in your document preamble
-\begin_inset Foot
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-See section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Caption-Formatting"
-\end_inset
- for more information of the package
-\series bold
-caption
-\series default
-.
+\backslash
+hdashline
\end_layout
\end_inset
-:
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-tableposition=top
-\end_layout
-
-\begin_layout Standard
-If you are using a
-\series bold
-KOMA-script
-\series default
-\begin_inset Index
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! KOMA-script
-\end_layout
-\end_inset
- document class (
-\family sans
-article (KOMA-script)
-\family default
-,
-\family sans
-book (KOMA-script)
-\family default
-,
-\family sans
-letter (KOMA-script)
-\family default
-, or
-\family sans
-report (KOMA-script)
-\family default
+\backslash
+rowcolor{Gray}
+\end_layout
-\begin_inset space \thinspace{}
\end_inset
-), you can alternatively to the
-\series bold
-caption
-\series default
- package set the document class option
-\series bold
-tablecaptionabove
-\series default
-.
+k
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
+</cell>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
-It is also possible to set the caption beside a figure or table.
- To get this the LaTeX-package
-\series bold
-sidecap
-\series default
+\begin_layout Plain Layout
+l
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! sidecap
+m
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
- has to be loaded in the document preamble with the line
+\begin_layout Plain Layout
+n
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-usepackage[option]{sidecap}
+\begin_layout Plain Layout
+o
\end_layout
-\begin_layout Standard
-If you set no option, the caption is placed on the side of the outer page
- margin – to the right on odd pages, to the left on even pages.
- You can change the placement to inner margin with the option
-\series bold
-innercaption
-\series default
-.
- To force the placement always to the right or left, use the option
-\series bold
-rightcaption
-\series default
- or
-\series bold
-leftcaption
-\series default
-, respectively.
-\end_layout
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\begin_layout Standard
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-ifsidecap
+cdashline{4-5}
\end_layout
\end_inset
+p
+\end_layout
-\begin_inset Note Note
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-The following section will only be displayed when the LaTeX-package
-\series bold
-sidecap
-\series default
- is installed.
+q
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none" special="c:">
+\begin_inset Text
-
+\begin_layout Plain Layout
+r
\end_layout
-\begin_layout Standard
-To place in LyX the caption of a float on the side, it is necessary to add
- these commands to the document preamble:
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+s
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+<cell multicolumn="2" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\lyxline
+\begin_layout Plain Layout
\end_layout
-\begin_layout Standard
-
-\series bold
-
-\backslash
-newcommand{
-\backslash
-TabBesBeg}{%
-\begin_inset Newline newline
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+t
+\end_layout
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+u
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
+\begin_inset Text
-\backslash
-hphantom{ }
+\begin_layout Plain Layout
+v
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+w
+\end_layout
-\backslash
-let
-\backslash
-MyTable
-\backslash
-table
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-hphantom{ }
+cellcolor{Maroon}
\end_layout
\end_inset
+i
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
-\backslash
-let
-\backslash
-MyEndtable
-\backslash
-endtable
-\begin_inset Newline newline
\end_inset
-\begin_inset ERT
-status collapsed
+\end_layout
-\begin_layout Plain Layout
+\end_inset
-\backslash
-hphantom{ }
\end_layout
-\end_inset
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
\backslash
-renewenvironment{table}{
+renewcommand{
\backslash
-begin{SCtable}}{
+hdashline}{
\backslash
-end{SCtable}}}
+myHdashline}
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-newcommand{
-\backslash
-TabBesEnd}{%
-\begin_inset Newline newline
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+reset to default
+\end_layout
+
\end_inset
+\end_layout
+
+\begin_layout Standard
\begin_inset ERT
status collapsed
\backslash
-hphantom{ }
+renewcommand{
+\backslash
+cdashline}{
+\backslash
+myCdashline}
\end_layout
\end_inset
-\backslash
-let
-\backslash
-table
-\backslash
-MyTable
-\begin_inset Newline newline
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+reset to default
+\end_layout
+
\end_inset
+\end_layout
+
+\begin_layout Standard
\begin_inset ERT
status collapsed
\backslash
-hphantom{ }
+nodashgapcolor
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+reset to default
\end_layout
\end_inset
-\backslash
-let
-\backslash
-endtable
-\backslash
-MyEndtable
\end_layout
\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
-\series bold
\backslash
-newcommand{
+setlength{
\backslash
-FigBesBeg}{%
-\begin_inset Newline newline
+arrayrulewidth}{0.4pt}
+\end_layout
+
\end_inset
-\begin_inset ERT
+\begin_inset Note Note
status collapsed
\begin_layout Plain Layout
+reset to default
+\end_layout
+
+\end_inset
-\backslash
-hphantom{ }
\end_layout
+\begin_layout Standard
+The coloring of lines, columns and lines works as decribed in section
+\begin_inset space ~
\end_inset
-\backslash
-let
-\backslash
-MyFigure
-\backslash
-figure
-\begin_inset Newline newline
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Colored-Tables"
+
\end_inset
+.
+ Coloring horizontal lines works analogically as described there as well,
+ one only needs to replace in the commands
+\series bold
-\begin_inset ERT
-status collapsed
+\backslash
+myHlineC
+\series default
+ by
+\series bold
-\begin_layout Plain Layout
+\backslash
+myHdashline
+\series default
+ and
+\backslash
+\series bold
+hline
+\series default
+ by
+\series bold
\backslash
-hphantom{ }
+hdashline
+\series default
+; so one uses the command
\end_layout
-\end_inset
+\begin_layout Standard
+\series bold
\backslash
let
\backslash
-MyEndfigure
+myHdashline
\backslash
-endfigure
+hdashline
\begin_inset Newline newline
\end_inset
-\begin_inset ERT
-status collapsed
+\backslash
+renewcommand{
+\backslash
+hdashline}
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
-\backslash
-hphantom{ }
\end_layout
\end_inset
-
+{
\backslash
-renewenvironment{figure}{
+arrayrulecolor{red}
\backslash
-begin{SCfigure}}{
+myHdashline
\backslash
-end{SCfigure}}}
+arrayrulecolor{black}}
\end_layout
\begin_layout Standard
-
+To color
\series bold
\backslash
-newcommand{
-\backslash
-FigBesEnd}{%
-\begin_inset Newline newline
-\end_inset
-
-
-\begin_inset ERT
-status collapsed
+cdashline
+\series default
+, the command is
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+\series bold
\backslash
-hphantom{ }
-\end_layout
-
+let
+\backslash
+myCdashline
+\backslash
+cdashline
+\begin_inset Newline newline
\end_inset
\backslash
-let
-\backslash
-figure
+renewcommand{
\backslash
-MyFigure
+cdashline}[1]
\begin_inset Newline newline
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
-\backslash
-hphantom{ }
\end_layout
\end_inset
-
+{
\backslash
-let
+arrayrulecolor{red}
\backslash
-endfigure
+myCdashline{#1}
\backslash
-MyEndfigure}
+arrayrulecolor{black}}
\end_layout
\begin_layout Standard
-
-\lyxline
-
+To get back the black line color, one needs to insert the following commands
+ as \SpecialChar TeX
+ Code behind the table:
\end_layout
\begin_layout Standard
-The commands allow you to redefine the floats so that the caption is set
- on the side.
- For figure floats use the command
+For
+\series bold
+
+\backslash
+hdashline
\end_layout
\begin_layout Standard
\series bold
\backslash
-FigBesBeg
+renewcommand{
+\backslash
+hdashline}{
+\backslash
+myHdashline}
\end_layout
\begin_layout Standard
-in TeX-Code before the float.
- Behind the float insert the command
+and for
+\series bold
+
+\backslash
+cdashline
\end_layout
\begin_layout Standard
\series bold
\backslash
-FigBesEnd
+renewcommand{
+\backslash
+cdashline}{
+\backslash
+myCdashline}
\end_layout
\begin_layout Standard
-in TeX-Code to get back to the original float definition.
+To color the gaps between the dashes the command
\end_layout
\begin_layout Standard
-For table floats use the corresponding commands
+
+\series bold
+
+\backslash
+dashgapcolor{color}
+\end_layout
+
+\begin_layout Standard
+can be used in front of a table as \SpecialChar TeX
+ Code.
+ color is hereby the name of a defined color.
+ The command
\end_layout
\begin_layout Standard
\series bold
\backslash
-TabBesBeg
-\series default
- and
+nodashgapcolor
+\end_layout
+
+\begin_layout Standard
+unsets the changes made by
\series bold
\backslash
-TabBesEnd
+dashgapcolor
+\series default
+.
\end_layout
\begin_layout Standard
-Figure
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+\color none
+Note
+\series default
+: If there are multiple commands in a cell, the command of
+\series bold
+arydshln
+\series default
+ needs to be the first one in the cell.
+ Therefore in cell
+\emph on
+k
+\emph default
+ of Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "fig:cap-beside-fig"
+reference "tab:Colored-table-with"
\end_inset
- and Table
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:cap-beside-tab"
-
-\end_inset
-
- are examples where the caption is set beside.
-\end_layout
-
-\begin_layout Standard
-You can see in the examples that the caption text appears at the top of
- the floats for table floats and at the bottom for figure floats.
- To change this, you can use the command
-\end_layout
-
-\begin_layout Standard
-
-\series bold
+ the command
+\series bold
\backslash
-sidecaptionvpos{float type}{placement}
-\end_layout
-
-\begin_layout Standard
-in the document preamble or in TeX-Code before the float.
- The float type is either
-\family sans
-figure
-\family default
- or
-\family sans
-table
-\family default
-, the placement can be
-\begin_inset Quotes eld
-\end_inset
-
-
-\family sans
-t
-\family default
-
-\begin_inset Quotes erd
-\end_inset
-
- for top,
-\begin_inset Quotes eld
-\end_inset
-
-
-\family sans
-c
-\family default
-
-\begin_inset Quotes erd
-\end_inset
-
- for center, or
-\begin_inset Quotes eld
-\end_inset
-
-
-\family sans
-b
-\family default
-
-\begin_inset Quotes erd
-\end_inset
-
- for bottom.
- To have for example the caption of figure floats vertically centered, use
- the command
-\end_layout
-
-\begin_layout Standard
-
+hdashline
+\series default
+ is before
\series bold
\backslash
-sidecaptionvpos{figure}{c}
-\end_layout
-
-\begin_layout Standard
-This was used for Figure
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "fig:cap-beside-fig-2"
-
-\end_inset
-
+rowcolor
+\series default
.
\end_layout
-\begin_layout Standard
-\begin_inset VSpace medskip
\end_inset
-For more information about the package
-\series bold
-sidecap
-\series default
- we refer to its documentation
-\begin_inset CommandInset citation
-LatexCommand cite
-key "sidecap"
-
-\end_inset
-.
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
\series bold
+\color none
Note:
\series default
- The LaTeX-package
+ The \SpecialChar LaTeX
+-package
\series bold
-hypcap
+arydshln
+\series default
+ must be loaded in the document preamble before the \SpecialChar LaTeX
+-package
+\series bold
+colortbl
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! hypcap
+\SpecialChar LaTeX
+-packages ! colortbl
\end_layout
\end_inset
-, described in section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Reference-Position"
-
-\end_inset
-
-, has no effect on floats with the caption set beside.
+.
\end_layout
\end_inset
\backslash
-FigBesBeg
+else
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Standard
-\begin_inset Float figure
-wide false
-sideways false
+\begin_inset Note Note
status open
\begin_layout Plain Layout
-\begin_inset Graphics
- filename clipart/escher-lsd.eps
- scale 75
- scaleBeforeRotation
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "fig:cap-beside-fig"
-
-\end_inset
-
-This is a caption beside a figure.
+The following will be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+arydshln
+\series default
+ is not installed:
\end_layout
\end_inset
\end_layout
-\end_inset
-
-
+\begin_layout Standard
+You need to install the package
+\series bold
+arydshln
+\series default
+ to see the content of this section in the output.
\end_layout
\begin_layout Standard
\backslash
-TabBesBeg
+fi
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset Float table
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:cap-beside-tab"
+For more information about dashed lines see the documentation of
+\series bold
+arydshln
+\series default
+,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "arydshln"
\end_inset
-This is a caption beside a table.
+.
\end_layout
-\end_inset
+\begin_layout Chapter
+Floats
+\begin_inset CommandInset label
+LatexCommand label
+name "chap:Floats"
+\end_inset
-\end_layout
-\begin_layout Plain Layout
-\begin_inset Tabular
-<lyxtabular version="3" rows="4" columns="5">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-a
+Floats
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-b
-\end_layout
+\begin_layout Section
+Introduction
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:FloatIntroduction"
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-c
+Floats ! Introduction
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
\end_layout
+\begin_layout Standard
+A float is a block of text associated with some sort of label, which doesn't
+ have a fixed location.
+ It can
+\begin_inset Quotes eld
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-d
-\end_layout
+float
+\begin_inset Quotes erd
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\end_layout
+ forward or backward a page or two, to wherever it fits best.
+
+\family sans
+Footnotes
+\family default
+ and
+\family sans
+Margin
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-e
+Notes
+\family default
+ are also floats because they can float to the next page when there are
+ too many notes on the page.
\end_layout
+\begin_layout Standard
+Floats allow a high quality layout.
+ Images and tables can be spread evenly among the pages to avoid white space
+ and pages without text.
+ As the floating often destroys the context between the text and the image/table
+, every float can be referenced in the text.
+ Floats are therefore numbered.
+ Referencing is described in section
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Referencing-Floats"
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-f
+.
\end_layout
+\begin_layout Standard
+To insert a float, use the menu
+\family sans
+Insert\SpecialChar menuseparator
+Float
+\family default
+ (toolbar button
+\begin_inset Info
+type "icon"
+arg "float-insert figure"
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\end_layout
+ or
+\begin_inset Info
+type "icon"
+arg "float-insert table"
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-g
-\end_layout
+).
+ This inserts the
+\family sans
+Caption
+\family default
+ inset, a box with a label.
+ The label will automatically be translated to the document language in
+ the output.
+ After the label you can insert the caption text.
+ The image or table is inserted above or below the caption in a separate
+ paragraph within the float.
+ More about the caption placement is contained in section
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Caption-Placement"
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-h
-\end_layout
+.
+ To keep your \SpecialChar LyX
+ document readable, you can open and close the float box by
+ left-clicking on the box label.
+ A closed float box looks like this:
+\begin_inset Graphics
+ filename clipart/floatQt4.png
+ scale 70
+ scaleBeforeRotation
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
+ – a gray button with a red label.
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-i
+\begin_layout Standard
+It is recommended that you insert floats as separate standard paragraphs
+ to avoid possible \SpecialChar LaTeX
+-errors that can occur when the surrounding text is specially
+ formatted.
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
+\begin_layout Standard
+Existing figures or tables can be put into a float by highlighting them
+ and then pressing the corresponding toolbar button for a new float.
+\end_layout
+\begin_layout Section
+Float Types
\end_layout
+\begin_layout Standard
+Besides figure and table floats that are described in sections
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-j
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Figure-Floats"
-\begin_layout Plain Layout
+\end_inset
-\end_layout
+ and
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Table-Floats"
\end_inset
-</cell>
-</row>
-</lyxtabular>
+ respectively, \SpecialChar LyX
+ offers the float types
+\family sans
+Algorithm
+\family default
+ and
+\family sans
+Wrap
+\family default
+.
+ The latter are explained in sec.
+\begin_inset space \thinspace{}
\end_inset
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Wrap-Floats"
\end_inset
-
+.
\end_layout
-\begin_layout Standard
-\begin_inset ERT
+\begin_layout Subsection
+Algorithm Floats
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-
-\backslash
-TabBesEnd
+Floats ! Algorithms
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-sidecaptionvpos{figure}{c}
-\end_layout
-
-\end_inset
-
-
-\begin_inset Float figure
+\begin_inset Float algorithm
+placement h
wide false
sideways false
status open
\begin_layout Plain Layout
-\begin_inset Graphics
- filename clipart/escher-lsd.eps
- scale 75
- scaleBeforeRotation
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset Caption Standard
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "fig:cap-beside-fig-2"
+name "alg:Example-Algorithm-float"
\end_inset
-This is a vertically centered caption beside a figure.
+Example Algorithm float
\end_layout
\end_inset
\end_layout
+\begin_layout LyX-Code
+for I in 1..N loop
+\begin_inset Newline newline
\end_inset
+ Sum:= Sum + A(I); /*comment*/
+\begin_inset Newline newline
+\end_inset
-\end_layout
-
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+end loop
+\begin_inset VSpace -4mm
+\end_inset
-\backslash
-FigBesEnd
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
+This float type is inserted with the menu
+\family sans
+Insert\SpecialChar menuseparator
+Float\SpecialChar menuseparator
+Algorithm
+\family default
+.
+ It is used for program codes and descriptions of algorithms and can be
+ seen as an alternative to program code listings that are explained in chapter
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "cha:Program-Code-Listings"
-\backslash
-else
-\end_layout
+\end_inset
+.
+ A possible environment for algorithms is the
+\family sans
+\SpecialChar LyX
+ Code
+\family default
+, described in \SpecialChar LyX
+'s
+\emph on
+Userguide
+\emph default
+.
+ Algorithm
+\begin_inset space ~
\end_inset
-\begin_inset Note Note
-status open
-
-\begin_layout Plain Layout
-The following will be displayed when the LaTeX-package
-\series bold
-sidecap
-\series default
- is not installed:
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "alg:Example-Algorithm-float"
\end_inset
+ is an example of an algorithm float where -4
+\begin_inset space \thinspace{}
+\end_inset
+mm vertical space was added at the end of the float to have the bottom rule
+ exactly below the last text line.
\end_layout
\begin_layout Standard
-You need to install the LaTeX-package
+The float label is not automatically translated into the document language.
+ If your document is not in English, you have to do this manually by adding
+ the following line to the document preamble
\series bold
-sidecap
-\series default
- to see the following part of this section in the output.
+:
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+\series bold
\backslash
-fi
+floatname{algorithm}{your
+\begin_inset space ~
+\end_inset
+
+name}
\end_layout
+\begin_layout Standard
+where
+\family sans
+your
+\begin_inset space ~
\end_inset
+name
+\family default
+ is the word
+\begin_inset Quotes eld
+\end_inset
-\end_layout
-
-\begin_layout Section
-Listings of Floats
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-Floats ! Float Lists
-\end_layout
+\emph on
+algorithm
+\emph default
+\begin_inset Quotes erd
\end_inset
-
+ in your language.
\end_layout
\begin_layout Standard
-Similar to the the table of contents where the sections of the document
- are listed, there are listings for all float types, like the figures of
- the documents.
- You can insert them via the
+To insert the list of algorithms you can use the menu
\family sans
-Insert\SpecialChar \menuseparator
+Insert\SpecialChar menuseparator
List
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
/
-\begin_inset space ~
+\begin_inset space \thinspace{}
\end_inset
-TOC
+TOC\SpecialChar menuseparator
+List of Algorithms
\family default
- sub menus.
-\end_layout
-
-\begin_layout Standard
-The list entries are the float captions or its short title, the float number,
- and the page number where they appear in the document.
+ when your document has the same language as \SpecialChar LyX
+'s menu names.
+ In other cases use this command in \SpecialChar TeX
+ Code instead:
\end_layout
\begin_layout Standard
-You can find the list of figures and tables at the end of this document.
-\end_layout
-
-\begin_layout Chapter
-Notes
-\end_layout
-
-\begin_layout Section
-LyX Notes
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-Notes ! LyX Notes
-\end_layout
+\series bold
+\backslash
+listof{algorithm}{your
+\begin_inset space ~
\end_inset
-
+name}
\end_layout
\begin_layout Standard
-Notes are inserted with the toolbar button
-\begin_inset Graphics
- filename ../images/note-insert.png
- scale 85
- scaleBeforeRotation
-
-\end_inset
-
- or the menu
+where
\family sans
-Insert\SpecialChar \menuseparator
-Note
-\family default
-.
- There are three types of notes:
-\end_layout
-
-\begin_layout Description
-LyX
+your
\begin_inset space ~
\end_inset
-Note This note type is for internal notes that won't appear in the output.
- Its note-box looks like this:
-\begin_inset Newline newline
+name
+\family default
+ is the word
+\begin_inset Quotes eld
\end_inset
-\begin_inset Newline newline
+\emph on
+List of Algorithm
+\emph default
+s
+\begin_inset Quotes erd
\end_inset
+ in your language.
+\end_layout
-\begin_inset Graphics
- filename clipart/LyXNoteImageQt4.png
- display false
- scale 85
- scaleBeforeRotation
-
+\begin_layout Standard
+Algorithm floats are not by default numbered in the scheme
+\begin_inset Quotes eld
\end_inset
-
-\begin_inset Note Note
-status open
+chapter.algorithm
+\begin_inset Quotes erd
+\end_inset
-\begin_layout Plain Layout
-This is text in a note box that doesn't appear in the output.
+ as is the case for table and figure floats in many document-classes.
+ To number algorithm floats in the same scheme, add this command to your
+ document preamble:
\end_layout
-\end_inset
+\begin_layout Standard
+\series bold
+\backslash
+numberwithin{algorithm}{chapter}
\end_layout
-\begin_layout Description
-Comment This note also doesn't appear in the output but it appears as LaTeX-comm
-ent, when you export the document to LaTeX via the menu
+\begin_layout Standard
+To be able to use the command
+\series bold
+
+\backslash
+numberwithin
+\series default
+, set in the tab
\family sans
-File\SpecialChar \menuseparator
-Export\SpecialChar \menuseparator
-LaTeX (pdflatex) / (plain)
-\family default
-.
- Its note-box looks like this:
-\begin_inset Newline newline
+Math
+\begin_inset space ~
\end_inset
-
-\begin_inset Newline newline
+Options
+\family default
+ in the document settings the option
+\family sans
+Use
+\begin_inset space ~
\end_inset
+AMS
+\begin_inset space ~
+\end_inset
-\begin_inset Graphics
- filename clipart/CommentNoteImageQt4.png
- display false
- scale 85
- scaleBeforeRotation
-
+math
+\begin_inset space ~
\end_inset
-
-\begin_inset Note Comment
-status open
+package
+\family default
+.
+\end_layout
+
+\begin_layout Section
+Float Numbering
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-This is text in a note box that only appears as comment in LaTeX-files.
+Floats ! Numbering
\end_layout
\end_inset
\end_layout
-\begin_layout Description
-Greyed
-\begin_inset space ~
-\end_inset
-
-Out This note will appear in the output as grey text.
- Its note-box looks like this:
-\begin_inset Newline newline
+\begin_layout Standard
+Floats are usually numbered either independently from the sections the floats
+ are in, or in the scheme
+\begin_inset Quotes eld
\end_inset
-
-\begin_inset Newline newline
+chapter.number
+\begin_inset Quotes erd
\end_inset
-
-\begin_inset Graphics
- filename clipart/GreyedOutNoteImageQt4.png
- display false
- scale 85
- scaleBeforeRotation
-
+ or
+\begin_inset Quotes eld
\end_inset
-
-\begin_inset Newline newline
+section.number
+\begin_inset Quotes erd
\end_inset
+.
+ This depends on the document class used.
+\end_layout
-\begin_inset ERT
-status collapsed
+\begin_layout Standard
+To change section-independent numbering, you can use this command in the
+ document preamble:
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+\series bold
\backslash
-renewenvironment{lyxgreyedout}
+renewcommand{
+\backslash
+thetable}{
+\backslash
+roman{table}}
\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+
+\series bold
-{
\backslash
-textcolor[gray]{0.8}
+thetable
+\series default
+ is the command that prints the table number.
+ For figure floats, the command would be
+\series bold
+
\backslash
-bgroup}{
+thefigure
+\series default
+.
+
+\series bold
+
\backslash
-egroup}
+roman
+\series default
+ in the command above prints the table number as a small roman number.
\end_layout
+\begin_layout Standard
+To change the numbering scheme for example to
+\begin_inset Quotes eld
\end_inset
+subsection.number
+\begin_inset Quotes erd
+\end_inset
-\begin_inset Note Greyedout
-status open
+, use this command in the preamble:
+\end_layout
-\begin_layout Plain Layout
-This is text
-\begin_inset Foot
-status open
+\begin_layout Standard
-\begin_layout Plain Layout
-This is an example footnote within a greyed out note.
+\series bold
+
+\backslash
+numberwithin{table}{subsection}
\end_layout
+\begin_layout Standard
+To be able to use the command
+\series bold
+
+\backslash
+numberwithin
+\series default
+, set in the tab
+\family sans
+Math
+\begin_inset space ~
\end_inset
- of a comment that appears in the output as grey text.
-\end_layout
+Options
+\family default
+ in the document settings the option
+\family sans
+Use
+\begin_inset space ~
+\end_inset
+AMS
+\begin_inset space ~
\end_inset
+math
+\begin_inset space ~
+\end_inset
-\begin_inset ERT
-status collapsed
+package
+\family default
+.
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+Please also have a look at section
+\begin_inset space ~
+\end_inset
-\backslash
-renewenvironment{lyxgreyedout}
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Footnote-Numbering"
-\begin_layout Plain Layout
+\end_inset
-{
-\backslash
-textcolor{blue}
-\backslash
-bgroup}{
-\backslash
-egroup}
+ for the details and important notes about the numbering commands.
\end_layout
+\begin_layout Section
+Referencing Floats
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Referencing-Floats"
+
\end_inset
-\begin_inset Note Note
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-The greyed out note is here redefined to show it with the original LyX definitio
-n because greyed out notes are redefined in the preamble of this document,
- as described below, to have blue text.
+Floats ! References
\end_layout
\end_inset
-\begin_inset Newline newline
-\end_inset
+\begin_inset Index idx
+status collapsed
+\begin_layout Plain Layout
+References ! to Floats
+\end_layout
-\begin_inset Newline newline
\end_inset
-As you can see in the example, the first line of greyed out notes is a bit
- indented and greyed out notes can have footnotes.
+
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
+To reference a float, insert a label into its caption using the menu
+\family sans
+Insert\SpecialChar menuseparator
+Label
+\family default
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "label-insert"
\end_inset
-When you use the toolbar button
+.
+ A grey label box like this one:
\begin_inset Graphics
- filename ../images/note-insert.png
+ filename clipart/labelQt4.png
scale 85
scaleBeforeRotation
\end_inset
- to insert notes, a
-\family sans
-LyX
-\begin_inset space ~
+ will be inserted and the label window pops up asking for the label text.
+ \SpecialChar LyX
+ offers as text the first words of the caption with a prefix.
+ The prefix depends on the float type, e.
+\begin_inset space \thinspace{}
\end_inset
-Note
-\family default
- is inserted.
- You can switch between the five note types by right-clicking on the note-box.
-
-\family roman
-\series medium
-\bar no
-If you want to turn existing text into a note, mark it and click on the
- note
+g.
+\begin_inset space \space{}
+\end_inset
+
+for figure floats the prefix will be "
+\family sans
+fig:
\family default
-\series default
-\bar default
- toolbar
-\family roman
-\series medium
-\bar no
-button
+".
+\end_layout
+
+\begin_layout Standard
+The label is used as anchor and name for the reference.
+ You can refer to the label using the menu
+\family sans
+Insert\SpecialChar menuseparator
+Cross-reference
\family default
-\series default
-\bar default
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset ref"
+\end_inset
+
.
- To change a note to text, press the backspace key when the cursor is in
- the first position of a note, or press the deletey key when the cursor
- is in the very last position of the note, respectively.
+ The cross-reference window appears showing all labels of the document.
+ If you have multiple \SpecialChar LyX
+ documents opened, choose the one you are working
+ on from the drop-list at the top of the dialog.
+ You can now sort the labels alphabetically and then choose one.
+ A grey cross-reference box like this one:
+\begin_inset Graphics
+ filename clipart/referenceQt4.png
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+
+ will be inserted.
+ At the position of the cross-reference box the float number will appear
+ in the output.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
+It is recommended that you use a protected space between the cross-reference
+ name and its number to avoid line breaks between them.
+ If a cross-reference refers to a non-existing label, you will see two question
+ marks in the output instead of the reference.
+\end_layout
-You can change the text color of the greyed out notes in the preamble with
- the following command:
+\begin_layout Standard
+You can change labels at any time by clicking on the label box.
+ References to the changed label will automatically update their links to
+ the new label text.
\end_layout
\begin_layout Standard
+The button
+\family sans
+Go
+\begin_inset space ~
+\end_inset
-\series bold
+to
+\begin_inset space ~
+\end_inset
-\backslash
-renewenvironment{lyxgreyedout}
-\begin_inset Newline newline
+Label
+\family default
+ in the cross-reference window sets the cursor before the referred label.
+ The button text changes then to Go
+\begin_inset space ~
\end_inset
+Back and you can use it to set the cursor back to the cross-reference.
+\end_layout
-\begin_inset ERT
-status collapsed
+\begin_layout Subsection
+Cross-Reference Formats
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Cross-Reference-Formats"
-\begin_layout Plain Layout
+\end_inset
-\backslash
-hphantom{ }
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+References ! Formats
\end_layout
\end_inset
-{
-\backslash
-textcolor{color}
-\backslash
-bgroup}{
-\backslash
-egroup}
+
\end_layout
\begin_layout Standard
-The available colors and the method to define own colors is explained in
- section
-\begin_inset space ~
-\end_inset
-
+There are six varieties of cross-references:
+\end_layout
+\begin_layout Description
+<reference>: prints the float number, this is the default:
\begin_inset CommandInset ref
LatexCommand ref
-reference "sec:Colored-Tables"
+reference "fig:Two-distorted-images"
\end_inset
-.
-\end_layout
-\begin_layout Standard
-Notes that appear in blue in this document are set using greyed out notes
- with blue text.
\end_layout
-\begin_layout Section
-Footnotes
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Footnotes"
+\begin_layout Description
+(<reference>): prints the float number within two parentheses, this is the
+ style normally used to reference formulas, especially when the reference
+ name
+\begin_inset Quotes eld
+\end_inset
+Equation
+\begin_inset Quotes erd
\end_inset
+ is omitted:
+\begin_inset CommandInset ref
+LatexCommand eqref
+reference "eq:Wgn"
+
+\end_inset
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-Notes ! Footnotes
\end_layout
+\begin_layout Description
+<page>: prints the page number: Page
+\begin_inset space ~
\end_inset
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Footnotes
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand pageref
+reference "fig:Two-distorted-images"
\end_inset
\end_layout
-\begin_layout Standard
-Footnotes can be inserted using the toolbar button
-\begin_inset Graphics
- filename ../images/footnote-insert.png
- scale 85
- scaleBeforeRotation
+\begin_layout Description
+on
+\begin_inset space ~
+\end_inset
+page
+\begin_inset space ~
\end_inset
- or the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Footnote
-\family default
-.
-
-\family roman
-\series medium
-\bar no
-You'll see
-\family default
-\series default
-\bar default
- then the following footnote-box:
-\begin_inset Graphics
- filename clipart/footnoteQt4.png
- scale 80
- scaleBeforeRotation
+<page>: prints the text "on page" and the page number:
+\begin_inset CommandInset ref
+LatexCommand vpageref
+reference "fig:Two-distorted-images"
\end_inset
-
-\family roman
-\series medium
-\bar no
-where you can enter the footnote text.
- If you want to turn existing text into a footnote, mark it and click on
- the footnote
-\family default
-\series default
-\bar default
- toolbar
-\family roman
-\series medium
-\bar no
-button
-\family default
-\series default
-\bar default
-.
- To change a
-\family roman
-\series medium
-\bar no
-footnote
-\family default
-\series default
-\bar default
- to text, press the Backspace key when the cursor is in the first position
- of a
-\family roman
-\series medium
-\bar no
-footnote
-\family default
-\series default
-\bar default
-, or press the Delete key when the cursor is in the very last position of
- the
-\family roman
-\series medium
-\bar no
-footnote
-\family default
-\series default
-\bar default
-, respectively.
+
\end_layout
-\begin_layout Standard
-Here is an example footnote:
-\family roman
-\series medium
-\bar no
+\begin_layout Description
+<reference>
+\begin_inset space ~
+\end_inset
-\begin_inset Foot
-status open
+on
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "foot:This-is-an"
+page
+\begin_inset space ~
+\end_inset
+
+<page>: prints the float number, the text "on page", and the page number:
+
+\begin_inset CommandInset ref
+LatexCommand vref
+reference "fig:Two-distorted-images"
\end_inset
-This is an example footnote.
+
\end_layout
+\begin_layout Description
+Formatted
+\begin_inset space ~
\end_inset
+reference: prints a self-defined cross-reference format.
+\begin_inset Newline newline
+\end_inset
-\family default
-\series default
-\bar default
-\begin_inset ERT
-status collapsed
+\begin_inset Note Greyedout
+status open
\begin_layout Plain Layout
+\series bold
+Note:
+\series default
+ This feature is only available when you have the \SpecialChar LaTeX
+-package
+\series bold
+prettyref
+\series default
+ or
+\series bold
+refstyle
+\series default
-\backslash
-newcounter{MyRepeatFoot}
-\end_layout
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-
-
-\backslash
-setcounter{MyRepeatFoot}{
-\backslash
-thefootnote}
+\SpecialChar LaTeX
+-packages ! prettyref
\end_layout
\end_inset
-\end_layout
+\begin_inset Index idx
+status collapsed
-\begin_layout Standard
-The footnote will appear in the output as a superscript number at the text
- position where the footnote box is placed.
- The footnote text is placed at the bottom of the current page.
- The footnote number is calculated by LaTeX, the numbers are consecutive.
- It depends on your document-class, if the footnote number is reset for
- every chapter.
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! refstyle
\end_layout
-\begin_layout Standard
-Footnotes can be referenced like floats: Insert a label into the footnote
- and cross-reference this label in the text as described in section
-\begin_inset space ~
\end_inset
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Referencing-Floats"
+ installed.
+\end_layout
\end_inset
-.
-\begin_inset Newline newline
-\end_inset
-This is a cross-reference of Footnote
-\begin_inset space ~
+\begin_inset Newline newline
\end_inset
+You can select which \SpecialChar LaTeX
+-package should be used for this feature by setting
+ the option
+\family sans
+Use refstyle (not prettyref) for cross-references
+\family default
+ in the menu
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Document Class
+\family default
+.
+ The format is specified by adding the command
+\series bold
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "foot:This-is-an"
+\backslash
+newrefformat
+\series default
+ (prettyref) or
+\series bold
+\backslash
+newref
+\series default
+ (refstyle) to the preamble of the document.
+ For example redefining all references to figures (which have the label
+ shortcut
+\begin_inset Quotes eld
\end_inset
-.
-\end_layout
-\begin_layout Standard
-\begin_inset VSpace defskip
+\family sans
+fig
+\family default
+
+\begin_inset Quotes erd
\end_inset
-To use footnotes within tables, you have to use minipages, see section
-\begin_inset space ~
+) can be done with this command
+\begin_inset Newline newline
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Minipages"
+\series bold
+
+\backslash
+newref{fig}{refcmd={Image on page
+\backslash
+pageref{#1}}}
+\series default
+
+\begin_inset Newline newline
+\end_inset
+
+For more information about the format, have a look at the package documentations
+,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "prettyref,refstyle"
\end_inset
.
- Footnotes within longtables are described in section
+\end_layout
+
+\begin_layout Description
+Textual
\begin_inset space ~
\end_inset
-
+reference: prints the caption of the reference:
\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Footnotes-in-Longtables"
+LatexCommand nameref
+reference "fig:Two-distorted-images"
\end_inset
-.
+
\end_layout
\begin_layout Standard
-\begin_inset VSpace defskip
-\end_inset
-To create only a mark for a footnote, use the command
-\series bold
+\family sans
+<page>
+\family default
+ will not print the page number if the label is on the previous, the same,
+ or the next page.
+ You will e.
+\begin_inset space \thinspace{}
+\end_inset
-\backslash
-footnotemark[number]
-\series default
- in TeX-Code.
- This is used when you have the same annotation several times in a text
- but doesn't want to print the footnote text every time.
-\begin_inset Newline newline
+g.
+\begin_inset space \space{}
\end_inset
-As you don't know the number of the repeating footnote while you are writing
- the text, you have to store its number.
- For the following footnote mark example, these commands were inserted in
- TeX-Code behind Footnote
-\begin_inset space ~
+see the text
+\begin_inset Quotes eld
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "foot:This-is-an"
+\family sans
+on this page
+\family default
+\begin_inset Quotes erd
\end_inset
- to store the footnote number:
+ instead.
+ The style
+\family sans
+<reference> on page <page>
+\family default
+ will not print anything about the page if the label is on the same page.
\end_layout
\begin_layout Standard
+The number and current page of the part of the document referred to in the
+ output is automatically calculated by \SpecialChar LaTeX
+.
+ The varieties are adjusted in the field
+\family sans
+Format
+\family default
+ of the cross-reference window that appears when you click on the cross-referenc
+e box.
+\end_layout
-\series bold
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
-\backslash
-newcounter{MyRepeatFoot}
-\begin_inset Newline newline
-\end_inset
+\begin_layout Plain Layout
+\series bold
+Note:
+\series default
+ It is recommended to use the \SpecialChar LaTeX
+-package
+\series bold
+refstyle
+\series default
-\backslash
-setcounter{MyRepeatFoot}{
-\backslash
-thefootnote}
-\end_layout
+\begin_inset Index idx
+status collapsed
-\begin_layout Standard
-The footnote mark was then created with this command:
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! refstyle
\end_layout
-\begin_layout Standard
+\end_inset
+ because
\series bold
+prettyref
+\series default
-\backslash
-footnotemark[
-\backslash
-theMyRepeatFoot]
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! prettyref
\end_layout
-\begin_layout Standard
-Here is an example footnote mark:
-\family roman
-\series medium
-\bar no
+\end_inset
-\begin_inset ERT
+ does not know all of \SpecialChar LyX
+'s possible label shortcuts
+\begin_inset Foot
status collapsed
\begin_layout Plain Layout
+\begin_inset Quotes eld
+\end_inset
+fig:
+\begin_inset Quotes erd
+\end_inset
-\backslash
-footnotemark[
-\backslash
-theMyRepeatFoot]
+ is for example \SpecialChar LyX
+'s shortcut for labels in figure captions.
\end_layout
\end_inset
-
+ and is not internationalized.
\end_layout
-\begin_layout Subsection
-Footnote Numbering
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Footnote-Numbering"
-
\end_inset
-\begin_inset Index
+\end_layout
+
+\begin_layout Subsection
+Automatic Reference Naming
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Footnotes ! Numbering
+References ! Automatic Reference Naming
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To reset the footnote number back to 1 after each section
-\family roman
-, add this command to your document preamble:
+The \SpecialChar LaTeX
+-package
+\series bold
+hyperref
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! hyperref
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
+, that is enabled in the
+\family sans
+PDF Properties
+\family default
+ of the
+\family sans
+Document Settings
+\family default
+ dialog, provides a very useful feature that cross-references automatically
+ include the name of the referenced floats (or text parts like
+\emph on
+section
+\emph default
+).
+ So you will save having to write e.
+\begin_inset space \thinspace{}
+\end_inset
-\backslash
-@addtoreset{footnote}{section}
-\end_layout
+g.
+\begin_inset space \space{}
+\end_inset
-\begin_layout Standard
-\begin_inset VSpace bigskip
+the name
+\begin_inset Quotes eld
\end_inset
-The following preamble command changes the footnote numbering style to small
- roman numerals:
+Figure
+\begin_inset Quotes erd
+\end_inset
+
+ before every reference to a figure.
+ To use this feature, enable
+\series bold
+hyperref
+\series default
+ and insert this line to the \SpecialChar LaTeX
+ preamble:
\end_layout
\begin_layout Standard
\series bold
+\backslash
+AtBeginDocument{
\backslash
renewcommand{
\backslash
-thefootnote}{
+ref}[1]{
\backslash
-roman{footnote}}
+mbox{
+\backslash
+autoref{#1}}}}
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
+When you prefer other reference names than the default ones, for example
+ you want instead of
+\begin_inset Quotes eld
+\end_inset
-\begin_layout Plain Layout
+section
+\begin_inset Quotes erd
+\end_inset
+
+ the name
+\begin_inset Quotes eld
+\end_inset
+
+sec.
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+, you can redefine the name by inserting this in the preamble:
+\end_layout
+\begin_layout Standard
+
+\series bold
\backslash
-renewcommand{
+addto
\backslash
-thefootnote}{
+extrasenglish{
\backslash
-roman{footnote}}
-\end_layout
-
+renewcommand{
+\backslash
+sectionautorefname}
+\begin_inset Newline newline
\end_inset
- This is a footnote with roman numbering:
-\begin_inset Foot
+
+\begin_inset Phantom HPhantom
status open
\begin_layout Plain Layout
-This is an example footnote with roman numbering.
-\end_layout
+\series bold
+\begin_inset space ~
\end_inset
\end_layout
-\begin_layout Standard
-To change the numbering style to capital roman numerals replace in the command
- above
-\series bold
+\end_inset
+{sec.
\backslash
-roman
-\series default
- by
-\series bold
+negthinspace}}
+\end_layout
-\backslash
-Roman
-\series default
-.
- To
-\begin_inset Quotes eld
+\begin_layout Standard
+When you are using another document language than English, replace
+\begin_inset Newline newline
\end_inset
-number
-\begin_inset Quotes erd
-\end_inset
- footnotes with capital or small Latin letters use
\series bold
\backslash
-Alph
+extrasenglish
\series default
- or
+ by
\series bold
\backslash
-alph
+extras***
\series default
-, respectively.
- To
-\begin_inset Quotes eld
-\end_inset
+, where *** is the name of the language used.
+\end_layout
-number
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Standard
+To get automatic names, but not for certain reference types, for example
+ not for equations, use this preamble code:
+\end_layout
+
+\begin_layout Standard
- footnotes with symbols use
\series bold
\backslash
-fnsymbol
+addto
+\backslash
+extrasenglish{
+\backslash
+renewcommand*{
+\backslash
+equationautorefname}[1]{}}
+\end_layout
+
+\begin_layout Standard
+More about this topic can be found in
+\series bold
+hyperref
\series default
+'s documentation
+\begin_inset CommandInset citation
+LatexCommand cite
+key "hyperref"
+
+\end_inset
+
.
\end_layout
\series bold
Note:
\series default
- You can only number 26 footnotes with Latin letters, because this numbering
- is limited to single letters.
+ Automatic reference naming cannot be used when you use cross-references
+ in the
+\family sans
+Formatted
+\begin_inset space ~
+\end_inset
+
+reference
+\family default
+ style, as described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Cross-Reference-Formats"
+
+\end_inset
+
+.
\end_layout
\end_inset
-\begin_inset Newline newline
+\end_layout
+
+\begin_layout Standard
+The
+\emph on
+Math
+\emph default
+ manual is an example where automatic reference naming is used.
+\end_layout
+
+\begin_layout Subsection
+Reference Position
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Reference-Position"
+
\end_inset
-\begin_inset Note Greyedout
-status open
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-
-\series bold
-Note:
-\series default
- You can only number 9 footnotes with symbols.
+References ! Reference Position
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To return to the default numbering style when you changed to another one,
- use
+If you use
\series bold
-
-\backslash
-arabic
+hyperref
\series default
- instead of
-\series bold
-\backslash
-roman
-\series default
- in the command above.
-\begin_inset ERT
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! hyperref
+\end_layout
+\end_inset
-\backslash
-renewcommand{
-\backslash
-thefootnote}{
-\backslash
-arabic{footnote}}
+ in the
+\family sans
+PDF Properties
+\family default
+ of the
+\family sans
+Document Settings
+\family default
+ dialog to link cross-references in the output, you will see that clicking
+ on an image float reference jumps to the image label.
+ The caption will be the first text part on the screen, so that you cannot
+ see the image without scrolling.
+ This is because the reference link anchor is placed at the position of
+ the label.
+ With the use of the package
+\series bold
+hypcap
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! hypcap
\end_layout
\end_inset
+, which is part of the \SpecialChar LaTeX
+-package
+\series bold
+oberdiek
+\series default
+
+\begin_inset Index idx
+status collapsed
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! oberdiek
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
+, the link anchor is placed at the beginning of a float.
+ To use this feature for figure floats, load
+\series bold
+hypcap
+\series default
+ in the document preamble with the line
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+\backslash
+usepackage[figure]{hypcap}
\end_layout
\begin_layout Standard
-If you want to have footnotes numbered in the scheme
-\begin_inset Quotes eld
-\end_inset
+You can also use
+\series bold
+hypcap
+\series default
+ for all float types but this is not recommended for stability reasons.
+ For more information, have a look at
+\series bold
+hypcap
+\series default
+'s manual
+\begin_inset CommandInset citation
+LatexCommand cite
+key "hypcap"
-chapter.footnote
-\begin_inset Quotes erd
\end_inset
-, add the following command to your document preamble:
+.
\end_layout
\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
\series bold
+Note:
+\series default
+
+\series bold
+hypcap
+\series default
+ has no effect on references to subfigures.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Section
+Float Placement
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Float-Placement"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Floats ! Placement
+\end_layout
+
+\end_inset
+
-\backslash
-numberwithin{footnote}{chapter}
\end_layout
\begin_layout Standard
-To be able to use the command
-\series bold
+Right-clicking on a float-box and clicking on
+\family sans
+Settings
+\family default
+ opens a dialog where you can alter the placement options that \SpecialChar LaTeX
+ uses for
+ positioning the float.
+\begin_inset Newline newline
+\end_inset
-\backslash
-numberwithin
-\series default
-, set in the tab
+The option
\family sans
-Math
+Span
\begin_inset space ~
\end_inset
-Options
+columns
\family default
- in the document settings the option
+ is only useful for two-column documents: If you select it, the float will
+ span both columns on the page instead of being confined to just one.
+\begin_inset Newline newline
+\end_inset
+
+The option
\family sans
-Use
+Rotate
\begin_inset space ~
\end_inset
-AMS
+sideways
+\family default
+ is used to rotate floats, see section
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Rotated-Floats"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+You can use one or more of the following options in the float dialog to
+ set the placement for a particular float when you uncheck the option
+\family sans
+Use
\begin_inset space ~
\end_inset
-math
+default
\begin_inset space ~
\end_inset
-package
+placement
\family default
-.
+:
\end_layout
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+\begin_layout Description
+Here
+\begin_inset space ~
+\end_inset
+if
+\begin_inset space ~
+\end_inset
-\backslash
-numberwithin{footnote}{chapter}
+possible try to place the float on the position where it has been inserted
\end_layout
+\begin_layout Description
+Top
+\begin_inset space ~
\end_inset
-This is another example footnote:
-\series bold
+of
+\begin_inset space ~
+\end_inset
-\begin_inset Foot
-status open
+page try to place the float at the top of the current page
+\end_layout
-\begin_layout Plain Layout
-This is a footnote numbered in the scheme
-\begin_inset Quotes eld
+\begin_layout Description
+Bottom
+\begin_inset space ~
\end_inset
-chapter.footnote
-\begin_inset Quotes erd
+of
+\begin_inset space ~
\end_inset
-.
+page try to place the float at the bottom of the current page
\end_layout
+\begin_layout Description
+Page
+\begin_inset space ~
\end_inset
+of
+\begin_inset space ~
+\end_inset
-\series default
-
-\begin_inset ERT
-status collapsed
+floats try to place the float on its own page
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+The order of the above option is
+\emph on
+always
+\emph default
+ used by \SpecialChar LaTeX
+.
+ That means, if you use the default placement, \SpecialChar LaTeX
+ will first try out
+\family sans
+Here
+\begin_inset space ~
+\end_inset
+if
+\begin_inset space ~
+\end_inset
-\backslash
-renewcommand{
-\backslash
-thefootnote}{
-\backslash
-arabic{footnote}}
-\end_layout
+possible
+\family default
+, then
+\family sans
+Top
+\begin_inset space ~
+\end_inset
+of
+\begin_inset space ~
\end_inset
+page
+\family default
+, and then the others.
+ If you do not use the default, \SpecialChar LaTeX
+ will try only the checked options but in
+ the same order.
+ If none of the 4
+\begin_inset space ~
+\end_inset
+placements is possible the procedure is internally repeated trying to put
+ the float on the following page.
\end_layout
\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+By default, each option has its own rules:
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
-\series bold
-Note:
-\series default
-
+\family sans
+Top
+\begin_inset space ~
+\end_inset
+
+of
+\begin_inset space ~
+\end_inset
+
+page
+\family default
+ only floats occupying less than 70
+\begin_inset space \thinspace{}
+\end_inset
+
+% of the page can be placed at the top of a page (
\series bold
\backslash
-numberwithin
+topfraction
\series default
- always prints out the footnote number as arabic number; previous redefinitions
- to get non-arabic numbers are overwritten.
+)
\end_layout
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+
+\family sans
+Bottom
+\begin_inset space ~
+\end_inset
+
+of
+\begin_inset space ~
+\end_inset
+
+page
+\family default
+: only floats occupying less than 30
+\begin_inset space \thinspace{}
\end_inset
+% of the page can be placed at the bottom of a page.
+ (
+\series bold
+\backslash
+bottomfraction
+\series default
+)
\end_layout
-\begin_layout Standard
-So to get for example the scheme
-\begin_inset Quotes eld
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+
+\family sans
+Page
+\begin_inset space ~
\end_inset
-chapter.
-\backslash
-Roman{footnote}
-\begin_inset Quotes erd
+of
+\begin_inset space ~
\end_inset
-, use this command instead of
+floats
+\family default
+: only if more than 50
+\begin_inset space \thinspace{}
+\end_inset
+
+% of the page is occupied by floats, several floats can be set together
+ on a page.
+ (
\series bold
\backslash
-numberwithin
+floatpagefraction
\series default
-:
+)
+\end_layout
+
+\begin_layout Standard
+If you don't like these rules, you can ignore them by using the additional
+ option
+\family sans
+Ignore
+\begin_inset space ~
+\end_inset
+
+\SpecialChar LaTeX
+
+\begin_inset space ~
+\end_inset
+
+rules
+\family default
+.
+\begin_inset Newline newline
+\end_inset
+
+You can also redefine the rules with \SpecialChar LaTeX
+-commands that are given in parentheses
+ after the rules description above.
+ To increase for example the often too small default of the bottom-rule
+ to 50
+\begin_inset space \thinspace{}
+\end_inset
+
+% of the page, add this line to your document preamble:
\end_layout
\begin_layout Standard
\backslash
renewcommand{
\backslash
-thefootnote}{
-\backslash
-thechapter.
-\backslash
-Roman{footnote}}
+bottomfraction}{0.5}
\end_layout
-\begin_layout Subsection
-Footnote Placement
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Footnotes ! Placement
-\end_layout
+\begin_layout Standard
+Sometimes you might need, under all circumstances, a float to be placed
+ exactly at the position where it is inserted.
+ For this case you can use the option
+\family sans
+Here
+\begin_inset space ~
+\end_inset
+definitely
+\family default
+.
+ Use this option very rarely and only if the document is almost ready to
+ be printed, because the float is then no longer able to
+\begin_inset Quotes eld
\end_inset
+float
+\begin_inset Quotes erd
+\end_inset
+ when you change your document and this will often destroy the page layout.
\end_layout
\begin_layout Standard
-If you have several footnotes in one page, they appear without vertical
- space between them at the bottom of the page.
- To make them better readable you can e.
-\begin_inset space \thinspace{}
+There are no placement options for text wrap floats, because they are always
+ surrounded by the text of a certain paragraph.
+\begin_inset VSpace bigskip
\end_inset
-g.
-\begin_inset space \space{}
-\end_inset
-add 1.5
-\begin_inset space \thinspace{}
-\end_inset
+\end_layout
-mm space with the following preamble command:
+\begin_layout Standard
+Sometimes you have the problem that a float is placed at the top of a page
+ while its corresponding section starts at the middle of the page, so that
+ the reader could think the float is part of the previous section.
+ To avoid this the \SpecialChar LaTeX
+-command
+\series bold
+
+\backslash
+suppressfloats
+\series default
+ can be used.
+ It suppresses a given float placement for the page where it is inserted
+ and can therefore be used to avoid floats being set before a section starts.
+ To get this, add these commands to your document preamble:
\end_layout
\begin_layout Standard
\backslash
let
\backslash
-myFoot
+mySection
\backslash
-footnote
+section
\begin_inset Newline newline
\end_inset
\backslash
renewcommand{
\backslash
-footnote}[1]{
+section}{
\backslash
-myFoot{#1
+suppressfloats[t]
\backslash
-vspace{1.5mm}}}
+mySection}
+\end_layout
+
+\begin_layout Standard
+You can define the same for all section headings, like chapters and subsections.
+ This definition is not recommended to be used for small text parts like
+ subsubsections because \SpecialChar LaTeX
+ may then have problems finding a suitable placement.
\end_layout
\begin_layout Standard
\begin_inset VSpace bigskip
\end_inset
-In a two-column document the footnotes appear at the bottom of every column,
- see Figure
-\begin_inset space ~
-\end_inset
+In some cases it is required to have all figures/tables at the end of the
+ document.
+ For this purpose the \SpecialChar LaTeX
+-package
+\series bold
+endfloat
+\series default
+\begin_inset Index idx
+status collapsed
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "fig:Standard-footnote-placement"
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! endfloat
+\end_layout
\end_inset
-.
- If the footnotes should only appear at the bottom of the right column,
- as in Figure
-\begin_inset space ~
+ was developed.
+ It puts all figure and table floats at the end of the document into their
+ own sections.
+ At the original float position a text hint like
+\begin_inset Quotes eld
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "fig:Footnote-placement-in"
-
+\family sans
+[Figure
+\begin_inset space ~
\end_inset
-, use the LaTeX-package
-\series bold
-ftnright
-\series default
-
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-LaTeX-packages ! ftnright
-\end_layout
+3.2 about here.]
+\family default
+\begin_inset Quotes erd
\end_inset
- with this command in the document preamble:
+ is inserted.
+ The endfloat-package is loaded in the preamble with the line
\end_layout
\begin_layout Standard
\series bold
\backslash
-usepackage{ftnright}
+usepackage[options]{endfloat}
\end_layout
\begin_layout Standard
-\begin_inset Float figure
-placement !h
-wide false
-sideways false
+There are various package options to format the created figure/table sections.
+ For more information we refer you to the
+\series bold
+endfloat
+\series default
+ documentation
+\begin_inset CommandInset citation
+LatexCommand cite
+key "endfloat"
+
+\end_inset
+
+.
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Note Greyedout
status open
\begin_layout Plain Layout
-\begin_inset ERT
-status collapsed
-\begin_layout Plain Layout
+\series bold
+Note: endfloat
+\series default
+ doesn't provide an automatic translation for the text hint, you have to
+ do this manually, see section
+\begin_inset space ~
+\end_inset
+
+4 in
+\begin_inset CommandInset citation
+LatexCommand cite
+key "endfloat"
+\end_inset
-\backslash
-framebox{
+.
\end_layout
\end_inset
-\begin_inset Graphics
- filename clipart/without_fntright.pdf
- width 100col%
- scaleBeforeRotation
-
+\begin_inset Newline newline
\end_inset
-\begin_inset ERT
-status collapsed
+\begin_inset Note Greyedout
+status open
\begin_layout Plain Layout
-}
-\end_layout
+\series bold
+Note:
+\series default
+ There is currently a bug in
+\series bold
+endfloat
+\series default
+ when the caption contains a German
+\begin_inset Quotes eld
+\end_inset
+ß
+\begin_inset Quotes erd
\end_inset
+.
+ Use in this case the command
+\begin_inset Quotes eld
+\end_inset
-\end_layout
-\begin_layout Plain Layout
-\begin_inset Caption
+\series bold
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "fig:Standard-footnote-placement"
+\backslash
+ss
+\series default
+\begin_inset Quotes erd
\end_inset
-Standard footnote placement in two-column documents.
-\end_layout
-
+ in \SpecialChar TeX
+ Code instead of
+\begin_inset Quotes eld
\end_inset
+ß
+\begin_inset Quotes erd
+\end_inset
+.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset Float figure
-placement !h
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
+\begin_inset VSpace bigskip
+\end_inset
-\backslash
-framebox{
-\end_layout
+For more details about float placements, have a look at \SpecialChar LaTeX
+ books,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "latexcompanion,latexguide,latexbook"
\end_inset
+.
+\end_layout
-\begin_inset Graphics
- filename clipart/with_fntright.pdf
- width 100col%
- scaleBeforeRotation
+\begin_layout Section
+Rotated Floats
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Rotated-Floats"
\end_inset
-\begin_inset ERT
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-}
+Floats ! Rotating
\end_layout
\end_inset
\end_layout
-\begin_layout Plain Layout
-\begin_inset Caption
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "fig:Footnote-placement-in"
-
-\end_inset
-
-Footnote placement in two-column documents when the LaTeX-package
-\series bold
-ftnright
-\series default
- is used.
-\end_layout
-
+\begin_layout Standard
+Especially for wide tables you might have floats rotated.
+ To rotate a whole float including the caption, right-click on the float-box
+ and use the option
+\family sans
+Rotate
+\begin_inset space ~
\end_inset
-
+sideways
+\family default
+.
\end_layout
+\begin_layout Standard
+Rotated floats are always placed on a page of their own (or column of their
+ own; in case you have a multi-column document).
+ You can let them span several columns using the float settings option
+\family sans
+Span
+\begin_inset space ~
\end_inset
-
+columns
+\family default
+.
+ Floats are rotated so that you can read them from the outside margin.
+ To force a certain rotation direction for all pages, you can add either
+ the option
+\series bold
+figuresleft
+\series default
+ or
+\series bold
+figuresright
+\series default
+ to the document class options.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-In some scientific literature it is usual to collect the footnotes and print
- them in a separate paragraph at the the end of a section, like in Figure
+Referencing rotated floats is the same as for normal floats, the caption
+ format is also the same: Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "fig:Endnotes"
-
-\end_inset
-
-.
- They are then so called
-\begin_inset Quotes eld
-\end_inset
+reference "tab:Rotated-table"
-endnotes
-\begin_inset Quotes erd
\end_inset
-.
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Endnotes
+ is an example of a rotated table float.
\end_layout
-\end_inset
-
- To use endnotes instead of footnotes in your document, load in the menu
-
-\family sans
-Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
-Modules
-\family default
-the module
-\family sans
-Foot
-\begin_inset space ~
-\end_inset
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
-to
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-End
-\family default
-.
- To insert the collected footnotes, insert the command
+\series bold
+Note:
+\series default
+ Not all DVI-viewers are able to display rotated floats.
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
-\backslash
-theendnotes
-\end_layout
-\begin_layout Standard
-in TeX-Code at the the end of a section or chapter.
\end_layout
\begin_layout Standard
-\begin_inset Float figure
+\begin_inset Float table
wide false
-sideways false
+sideways true
status open
\begin_layout Plain Layout
-\align center
-\begin_inset ERT
-status collapsed
+\begin_inset Caption Standard
\begin_layout Plain Layout
-
-
-\backslash
-framebox{
-\end_layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Rotated-table"
\end_inset
-
-\begin_inset Graphics
- filename clipart/endnotes.pdf
- scaleBeforeRotation
+ Rotated table
+\end_layout
\end_inset
-\begin_inset ERT
-status collapsed
+\end_layout
\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="1" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-}
+\begin_layout Plain Layout
+test
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+b
\end_layout
-\begin_layout Plain Layout
-\begin_inset Caption
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "fig:Endnotes"
+c
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-Endnotes – footnotes are printed in a separate paragraph at the end of sections
- or chapters.
+\begin_layout Plain Layout
+d
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+e
\end_layout
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
\end_inset
\end_layout
-\begin_layout Standard
-\begin_inset VSpace medskip
-\end_inset
-
-The paragraph heading for the endnotes isn't automatically translated into
- the document language, this must be done manually.
- The following preamble command translate the default English name
-\begin_inset Quotes eld
\end_inset
-Notes
-\begin_inset Quotes erd
-\end_inset
- to the German translation
-\begin_inset Quotes eld
-\end_inset
+\end_layout
-Anmerkungen
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Section
+Subfloats
+\begin_inset Index idx
+status collapsed
-:
+\begin_layout Plain Layout
+Floats ! Subfloats
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-renewcommand{
-\backslash
-notesname}{Anmerkungen}
\end_layout
\begin_layout Standard
-\begin_inset VSpace medskip
-\end_inset
-
-The numbering of endnotes can be changed like the footnote numbering as
- described in section
+Subfloats are for example used when a figure consists of several images.
+ They are created by inserting a float into an existing float.
+ The placement of the subfloats can be controlled in the same way as for
+ paragraphs as shown in table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Footnote-Numbering"
+reference "tab:Two-subtables-side"
\end_inset
-; just replace the command
-\series bold
+ and
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Two-subtables-upon"
-\backslash
-thefootnote
-\series default
- by
-\series bold
+\end_inset
-\backslash
-theendnote
-\series default
.
- To reset the endnote number use the command
-\series bold
+\end_layout
-\backslash
-@addtoreset
-\series default
- as described in section
+\begin_layout Standard
+Referencing subfloats works as for normal floats: Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sub:Footnote-Numbering"
+reference "tab:This-is-subtable-a"
\end_inset
- and replace the command parameter
-\series bold
-footnote
-\series default
- by
-\series bold
-endnote
-\series default
-.
-\end_layout
-
-\begin_layout Standard
-To create only a mark for an endnote, use the command
-\series bold
+ and
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:This-is-subtable-b"
-\backslash
-endnotemark[number]
-\series default
- similar to the command
-\series bold
+\end_inset
-\backslash
-footnotemark
-\series default
-, described in section
+ are subtables of table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sec:Footnotes"
+reference "tab:Two-subtables-side"
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-Footnotes can also be placed in the page margin and the footnote text alignment
- can be changed, see the LaTeX-package
-\series bold
-footmisc
-\series default
+\begin_inset Float table
+wide false
+sideways false
+status open
-\begin_inset Index
-status collapsed
+\begin_layout Plain Layout
+\begin_inset Caption Standard
\begin_layout Plain Layout
-LaTeX-packages ! footmisc
-\end_layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Two-subtables-side"
\end_inset
-,
-\begin_inset CommandInset citation
-LatexCommand cite
-key "footmisc"
+Two subtables placed side by side.
+\end_layout
\end_inset
- for more information about this.
-\end_layout
-\begin_layout Standard
-For various further footnote formatting issues have a look at LaTeX-books,
-
-\begin_inset CommandInset citation
-LatexCommand cite
-key "latexcompanion,latexguide,latexbook"
+\end_layout
+\begin_layout Plain Layout
+\align center
+\begin_inset space \hfill{}
\end_inset
-.
-\end_layout
-\begin_layout Section
-Margin Notes
-\begin_inset Index
+\begin_inset Float table
+wide false
+sideways false
status collapsed
\begin_layout Plain Layout
-Notes ! Margin Notes
-\end_layout
-
-\end_inset
-
+\begin_inset Caption Standard
-\end_layout
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:This-is-subtable-a"
-\begin_layout Standard
-Margin notes look and behave in LyX like footnotes.
- They are inserted via the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Marginal
-\begin_inset space ~
\end_inset
-Note
-\family default
- or the toolbar button
-\begin_inset Graphics
- filename ../images/marginalnote-insert.png
- scale 85
- scaleBeforeRotation
-
-\end_inset
+This is subtable a.
+\end_layout
-.
- A grey
-\family roman
-\series medium
-box with the
-\family default
-\series default
- red
-\family roman
-\series medium
-label
-\begin_inset Quotes eld
\end_inset
-margin
-\begin_inset Quotes erd
-\end_inset
- appears where you can enter the text of the margin note.
\end_layout
-\begin_layout Standard
-At the side is an example margin note.
-
-\family roman
-\series medium
-
-\begin_inset Marginal
-status open
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="1" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-This is a margin note.
+test
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-
-\end_layout
-
-\begin_layout Standard
-Margin notes appear at the right side in single-sided documents.
- In double-sided documents they appear in the outer margin – left on even
- pages, right on odd pages.
- The text of margin notes is aligned opposite to the outer margin – right-aligne
-d when the note appears in the left margin.
- The first line of the margin note is placed at the position of the text
- line where it is inserted in the document.
+\begin_layout Plain Layout
+b
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-To place the margin note in the inner margin, add the command
+\begin_layout Plain Layout
+c
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-reversemarginpar
+\begin_layout Plain Layout
+d
\end_layout
-\begin_layout Standard
-in TeX-Code before a margin note.
- The new placement is valid for all following margin notes.
-
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-
-\backslash
-reversemarginpar
+e
\end_layout
\end_inset
+</cell>
+</row>
+</lyxtabular>
+\end_inset
-\begin_inset Marginal
-status open
-\begin_layout Plain Layout
-This is a margin note in the inner margin.
\end_layout
\end_inset
-\series bold
-
-\begin_inset Newline newline
+\begin_inset space \hfill{}
\end_inset
-\series default
+\begin_inset Float table
+wide false
+sideways false
+status collapsed
-\begin_inset Note Greyedout
-status open
+\begin_layout Plain Layout
+\begin_inset Caption Standard
\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:This-is-subtable-b"
-\series bold
-Note:
-\series default
- There is often not enough space in the inner margin so that the notes are
- not correctly displayed in the output.
+\end_inset
+
+This is subtable b.
\end_layout
\end_inset
\end_layout
-\begin_layout Standard
-To return to the default placement insert the command
-\end_layout
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="1" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\begin_layout Standard
+\begin_layout Plain Layout
+e
+\end_layout
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-normalmarginpar
+\begin_layout Plain Layout
+d
\end_layout
-\begin_layout Standard
-in TeX-Code.
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+c
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-normalmarginpar
+\begin_layout Plain Layout
+b
\end_layout
\end_inset
-
-
-\begin_inset Note Greyedout
-status open
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+test
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
-\series bold
-Note:
-\series default
- The command is ignored when it is within a paragraph where also the command
-
-\series bold
-\backslash
-reversemarginpar
-\series default
- is inserted.
\end_layout
\end_inset
+\begin_inset space \hfill{}
+\end_inset
+
+
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-\family roman
-\series medium
+\end_layout
-\begin_inset Marginal
+\begin_layout Standard
+\begin_inset Float table
+wide false
+sideways false
status open
\begin_layout Plain Layout
-AVeryLongMarginParWord that isn't hyphenated.
-\end_layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Two-subtables-upon"
\end_inset
+Two subtables placed one above the other.
+ (a) table with 4 cells, (b) table with 5 cells.
+\end_layout
-\family default
-\series default
- Similar to the case described in section
-\begin_inset space ~
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Multiple-Lines-in"
-
-\end_inset
+\end_layout
-, long words cannot be hyphenated when they are the first word in a margin
- note.
- To avoid this, insert 0
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
+\align center
+\begin_inset Float table
+wide false
+sideways false
+status collapsed
-pt horizontal space before the word
-\family roman
-\series medium
-.
-
-\begin_inset Marginal
-status open
+\begin_layout Plain Layout
+\begin_inset Caption Standard
\begin_layout Plain Layout
-\begin_inset space \hspace*{}
-\length 0pt
-\end_inset
-AVeryLongMarginParWord that is hyphenated.
\end_layout
\end_inset
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="1" columns="4">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+test
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+test
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+test
+\end_layout
-\series bold
-Note:
-\series default
- Margin notes can normally not be used inside tables, floats, and footnotes.
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+test
\end_layout
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
\end_inset
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
\end_layout
-\begin_layout Standard
-\begin_inset ERT
+\begin_layout Plain Layout
+\align center
+\begin_inset Float table
+wide false
+sideways false
status collapsed
\begin_layout Plain Layout
+\begin_inset Caption Standard
+\begin_layout Plain Layout
-\backslash
-ifmarginnote
\end_layout
\end_inset
-\begin_inset Note Note
-status open
+\end_layout
\begin_layout Plain Layout
-The following section will only be displayed when the LaTeX-package
-\series bold
-marginnote
-\series default
- is installed.
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="1" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+a
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+b
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+c
\end_layout
-\begin_layout Standard
-This restriction can be evaded by using the LaTeX-package
-\series bold
-marginnote
-\series default
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\begin_inset Index
-status collapsed
+\begin_layout Plain Layout
+d
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! marginnote
+e
\end_layout
\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
-.
- By adding these two lines to your document preamble, the command used by
- LyX for margin notes is redefined to use the command provided by the
-\series bold
-marginnote
-\series default
--package:
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-usepackage{marginnote}
-\begin_inset Newline newline
+\end_layout
+
\end_inset
-\backslash
-let
-\backslash
-marginpar
-\backslash
-marginnote
\end_layout
-\begin_layout Standard
-This is also used in this document because
-\series bold
-marginnote
-\series default
- has another useful feature: You can set a vertical offset for the note.
- This is often needed when too many margin notes are too close together
- or for a better page layout.
- The offset is set in LyX as TeX-Code directly behind the margin note in
- the scheme
+\begin_layout Section
+Floats Side by Side
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Floats ! Side by side
\end_layout
-\begin_layout Standard
+\end_inset
+
-\series bold
-[offset]
\end_layout
\begin_layout Standard
-where the offset is a length with one of the units listed in Table
+To place floats side by side, as in Figures
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Units"
+reference "fig:Float-left"
\end_inset
-.
- A negative value shifts the note up, a positive value shifts it down.
-
-\family roman
-\series medium
-For example the margin note beside this text line is shifted up 1.5
-\begin_inset space \thinspace{}
-\end_inset
+ and
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:Float-right"
-cm with the TeX-Code-command
-\begin_inset Quotes eld
\end_inset
+, only
+\emph on
+one
+\emph default
+ float is used.
+ In it two minipage boxes are inserted.
+\begin_inset Foot
+status collapsed
-\family default
-\series bold
-[-1.5cm]
-\family roman
-\series medium
-
-\begin_inset Quotes erd
+\begin_layout Plain Layout
+Minipages are explained in section
+\begin_inset space ~
\end_inset
-\begin_inset Marginal
-status open
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Minipages"
-\begin_layout Plain Layout
-This margin note is shifted up 1.5
-\begin_inset space \thinspace{}
\end_inset
-cm from its original position.
+.
\end_layout
\end_inset
-
-\family default
-\series default
-
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-[-1.5cm]
-\end_layout
-
+ The width is set to 45
+\begin_inset space \thinspace{}
\end_inset
+-50
+\begin_inset space \thinspace{}
+\end_inset
-\end_layout
+column% and the box alignment to
+\family sans
+Bottom
+\family default
+ for each minipage.
+ The minipage boxes contain the image and the caption in the same way as
+ they are in a float.
+ The only difference is that the image unit
+\family sans
+Column
+\begin_inset space ~
+\end_inset
-\begin_layout Standard
-\begin_inset VSpace medskip
+Width
+\begin_inset space ~
\end_inset
-With
-\series bold
-marginnote
-\series default
- you can also change the alignment of the text in the margin note.
- For example the commands
+%
+\family default
+ is now calculated according to the width of the minipage boxes.
\end_layout
\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
-\series bold
+\begin_layout Plain Layout
+\begin_inset Box Frameless
+position "b"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "45col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Graphics
+ filename clipart/mobius.eps
+ lyxscale 50
+ width 100col%
+ scaleBeforeRotation
-\backslash
-renewcommand*{
-\backslash
-raggedleftmarginnote}{
-\backslash
-centering}
-\begin_inset Newline newline
\end_inset
-\backslash
-renewcommand*{
-\backslash
-raggedrightmarginnote}{
-\backslash
-centering}
\end_layout
-\begin_layout Standard
-set the alignment to centered.
-
-\series bold
-
-\backslash
-raggedleftmarginnote
-\series default
- denotes margin notes that appear at the left side.
-\family roman
-\series medium
-
-\begin_inset ERT
-status collapsed
+\begin_layout Plain Layout
+\begin_inset Caption Standard
\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:Float-left"
+\end_inset
-\backslash
-renewcommand*{
-\backslash
-raggedleftmarginnote}{
-\backslash
-centering}
+Float on the left side.
\end_layout
-\begin_layout Plain Layout
+\end_inset
-\backslash
-renewcommand*{
-\backslash
-raggedrightmarginnote}{
-\backslash
-centering}
\end_layout
\end_inset
-\begin_inset Marginal
+\begin_inset space \hfill{}
+\end_inset
+
+
+\begin_inset Box Frameless
+position "b"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "45col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
status open
\begin_layout Plain Layout
-The text of this margin note is centered.
-\end_layout
+\align center
+\begin_inset Graphics
+ filename clipart/platypus.eps
+ lyxscale 50
+ width 100col%
+ scaleBeforeRotation
\end_inset
-\family default
-\series default
- The default is
\end_layout
-\begin_layout Standard
+\begin_layout Plain Layout
+\begin_inset Caption Standard
-\series bold
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:Float-right"
-\backslash
-renewcommand*{
-\backslash
-raggedleftmarginnote}{
-\backslash
-raggedleft}
-\begin_inset Newline newline
\end_inset
+Float on the right side.
+\end_layout
-\backslash
-renewcommand*{
-\backslash
-raggedrightmarginnote}{
-\backslash
-raggedright}
-\family roman
-\series medium
-
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+\end_inset
-\backslash
-renewcommand*{
-\backslash
-raggedleftmarginnote}{
-\backslash
-raggedleft}
\end_layout
-\begin_layout Plain Layout
+\end_inset
-\backslash
-renewcommand*{
-\backslash
-raggedrightmarginnote}{
-\backslash
-raggedright}
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-\begin_inset VSpace medskip
+An alternative and simpler solution is to use the module
+\family sans
+Variable-width Minipages
+\family default
+, see sec.
+\begin_inset space \thinspace{}
\end_inset
-For the other features of
-\series bold
-marginnote
-\series default
- we refer to its documentation
-\begin_inset CommandInset citation
-LatexCommand cite
-key "marginnote"
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Minipages"
\end_inset
.
+ Variable-width minipages adapt automatically to the width of the figures
+ and tables.
+ They do not require an explicit width to be given, and they improve the
+ horizontal alignment of the figures.
+ The LyX example file
+\emph on
+varwidth-floats-side-by-side
+\emph default
+ gives examples of how to do this.
+\end_layout
+
+\begin_layout Section
+Caption Formatting
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Caption ! Formatting
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Floats ! Caption Formatting
+\end_layout
+
+\end_inset
+
+
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Caption-Formatting"
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
+The
+\family sans
+Caption
+\family default
+ environment is the default paragraph environment for
+\family sans
+Floats
+\family default
+.
+ On the \SpecialChar LyX
+ screen captions appear as a label, e.
+\begin_inset space \thinspace{}
\end_inset
-You can adjust the layout of margin notes by changing its definition.
- To create for example a header for all margin notes with the underlined,
- sans-serif, and bold header text
+g.
+\begin_inset space \space{}
+\end_inset
+
+
\begin_inset Quotes eld
\end_inset
\family sans
-\series bold
-\bar under
-Attention!
+Figure #:
\family default
-\series default
-\bar default
\begin_inset Quotes erd
\end_inset
-, add this to your document preamble:
+ followed by the caption text.
+
+\begin_inset Quotes eld
+\end_inset
+
+#
+\begin_inset Quotes erd
+\end_inset
+
+ is the actual reference number.
+ By default the label and the number are in the same font as the caption
+ text and a colon follows the number to divide the label from the text.
+ This caption format is suitable for many but not all documents.
+
\end_layout
\begin_layout Standard
-
+To change the default caption format, load the \SpecialChar LaTeX
+-package
\series bold
+caption
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! caption
+\end_layout
-\backslash
-let
-\backslash
-myMarginpar
-\backslash
-marginpar
-\begin_inset Newline newline
\end_inset
+ in the document preamble with this line:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
\backslash
-renewcommand{
-\backslash
-marginpar}[1]{
-\backslash
-myMarginpar{%
-\begin_inset Newline newline
-\end_inset
+usepackage[format definition]{caption}
+\end_layout
+
+\begin_layout Standard
+To have for example the label and the number in sans-serif, bold font and
+ the table captions always above the table as in this document, use the
+ following command:
+\end_layout
+\begin_layout Standard
-\begin_inset ERT
-status collapsed
+\series bold
-\begin_layout Plain Layout
+\backslash
+usepackage[labelfont={bf,sf}, tableposition=top]{caption}
+\end_layout
+
+\begin_layout Standard
+You can also define different caption formats for the different float types.
+ In this case load the
+\series bold
+caption
+\series default
+ package without format specific options and define the different formats
+ with the help of the command
+\end_layout
+
+\begin_layout Standard
+\series bold
\backslash
-hphantom{ }
+captionsetup[float type]{format definition}
\end_layout
+\begin_layout Standard
+in the document preamble.
+ For example the caption formats of Figure
+\begin_inset space ~
\end_inset
-\backslash
-hspace{0pt}
-\backslash
-textsf{
-\backslash
-textbf{
-\backslash
-underbar{Attention!}}}%
-\begin_inset Newline newline
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:This-is-an-fig"
+
\end_inset
+ and Table
+\begin_inset space ~
+\end_inset
-\begin_inset ERT
-status collapsed
-\begin_layout Plain Layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:This-is-an-tab"
+\end_inset
-\backslash
-hphantom{ }
+ can be created using these commands in the document preamble:
\end_layout
-\end_inset
+\begin_layout Standard
+\series bold
\backslash
-vspace{1.5mm}
-\backslash
+usepackage[tableposition=top]{caption}
+\series default
+
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
\backslash
-#1}}
-\end_layout
+captionsetup[figure]{labelfont={tt}, textfont=it, indention=1cm,%
+\begin_inset Newline newline
+\end_inset
-\begin_layout Standard
-\family roman
-\series medium
-\begin_inset ERT
-status collapsed
+\begin_inset Phantom HPhantom
+status open
\begin_layout Plain Layout
+\series bold
\backslash
-let
-\backslash
-myMarginpar
-\backslash
-marginpar
+captionsetup[figure]{
\end_layout
-\begin_layout Plain Layout
+\end_inset
+
+labelsep=period}
+\begin_inset Newline newline
+\end_inset
\backslash
-renewcommand{
-\backslash
-marginpar}[1]{
-\backslash
-myMarginpar{%
+captionsetup[table]{labelfont={bf,sf}}
\end_layout
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
\begin_layout Plain Layout
-
-\backslash
-textsf{
-\backslash
-textbf{
-\backslash
-underbar{Attention!}}}%
-\end_layout
+\series bold
+Note:
+\series default
+ The option
+\series bold
+tableposition=top
+\series default
+ has no effect when a
+\series bold
+KOMA-Script
+\series default
+
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! KOMA-Script
+\end_layout
-
-\backslash
-vspace{1.5mm}
-\backslash
+\end_inset
-\backslash
-#1}}
+ document class is used.
+ In this case the document class option
+\series bold
+captions=tableheading
+\series default
+ must be used.
\end_layout
\end_inset
-\begin_inset Marginal
-status open
-
-\begin_layout Plain Layout
-This is a margin note with a defined heading.
\end_layout
+\begin_layout Standard
+For more information about the package
+\series bold
+caption
+\series default
+ we refer to its documentation
+\begin_inset CommandInset citation
+LatexCommand cite
+key "caption"
+
\end_inset
+.
+\end_layout
-\family default
-\series default
+\begin_layout Standard
+To change the label name from e.
+\begin_inset space \thinspace{}
+\end_inset
-\begin_inset ERT
-status collapsed
+g.
+\begin_inset space \space{}
+\end_inset
-\begin_layout Plain Layout
-[-1.5cm]
-\end_layout
+\begin_inset Quotes eld
+\end_inset
+Figure
+\begin_inset Quotes erd
\end_inset
+ to
+\begin_inset Quotes eld
+\end_inset
-\family roman
-\series medium
+Image
+\begin_inset Quotes erd
+\end_inset
-\begin_inset ERT
-status collapsed
+ use this preamble command:
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+\series bold
\backslash
renewcommand{
\backslash
-marginpar}[1]{
+fnum@figure}{Image~
\backslash
-myMarginpar{#1}}
+thefigure}
\end_layout
-\end_inset
+\begin_layout Standard
+where
+\series bold
+\backslash
+thefigure
+\series default
+ inserts the figure number and
+\series bold
+
+\begin_inset Quotes eld
+\end_inset
-\family default
+~
\series default
-\begin_inset Note Note
-status collapsed
+\begin_inset Quotes erd
+\end_inset
-\begin_layout Plain Layout
-The margin note format is changed only for this example.
+ creates a protected space.
\end_layout
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
+If you are using a
+\series bold
+KOMA-Script
+\series default
-\end_layout
-
-\begin_layout Standard
-\begin_inset ERT
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-
-\backslash
-else
+\SpecialChar LaTeX
+-packages ! KOMA-Script
\end_layout
\end_inset
+ document class (
+\family sans
+article (KOMA-Script)
+\family default
+,
+\family sans
+book (KOMA-Script)
+\family default
+,
+\family sans
+letter (KOMA-Script)
+\family default
+, or
+\family sans
+report (KOMA-Script)
+\family default
-\begin_inset Note Note
-status open
+\begin_inset space \thinspace{}
+\end_inset
-\begin_layout Plain Layout
-The following will be displayed when the LaTeX-package
+), you can alternatively to the
\series bold
-marginnote
+caption
\series default
- is not installed:
+ package use
+\series bold
+KOMA-Script
+\series default
+'s built-in command
+\series bold
+
+\backslash
+setkomafont
+\series default
+.
+ For example, to have the caption label in bold, add this command to your
+ document preamble:
\end_layout
-\end_inset
+\begin_layout Standard
+\series bold
+\backslash
+setkomafont{captionlabel}{
+\backslash
+bfseries}
\end_layout
\begin_layout Standard
-You need to install the LaTeX-package
+For more information about
\series bold
-marginnote
+
+\backslash
+setkomafont
\series default
- to see the following part of this section in the output.
+ we refer to the
+\series bold
+KOMA-Script
+\series default
+ documentation
+\begin_inset CommandInset citation
+LatexCommand cite
+key "KOMA-Script"
+
+\end_inset
+
+.
\end_layout
\begin_layout Standard
\backslash
-fi
+captionsetup[figure]{labelfont={tt}, textfont=it, indention=1cm, labelsep=period
+}
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Chapter
-Boxes
-\end_layout
-
-\begin_layout Section
-Introduction
-\begin_inset Index
-status collapsed
+\begin_inset Note Note
+status open
\begin_layout Plain Layout
-Boxes ! Introduction
+The caption format is changed only for this example.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Boxes are used to format a block of text.
- Boxes can be used to write documents with multiple languages, see section
-\begin_inset space ~
-\end_inset
-
+\begin_inset Float figure
+placement !p
+wide false
+sideways false
+status open
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Minipages"
+\begin_layout Plain Layout
+\align center
+\begin_inset Graphics
+ filename clipart/mobius.eps
+ lyxscale 50
+ scale 50
+ scaleBeforeRotation
\end_inset
-, to frame texts, see section
-\begin_inset space ~
-\end_inset
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Decoration"
+\begin_layout Plain Layout
+\begin_inset Caption Standard
-\end_inset
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:This-is-an-fig"
-, to prevent words to be hyphenated, see section
-\begin_inset space ~
\end_inset
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Prevent-Hyphenation"
+This is an example figure caption that is longer than one line to show the
+ different caption format.
+ Here a self-defined caption format is used.
+\end_layout
\end_inset
-, to align text, see section
-\begin_inset space ~
+
+\end_layout
+
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Vertical-Alignment"
+\end_layout
-\end_inset
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
-, or to set the background color of texts, see section
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Colored-Boxes"
+\backslash
+captionsetup[figure]{labelfont={bf,sf}, textfont=rm, indention=0cm, labelsep=col
+on}
+\end_layout
\end_inset
-.
+
\end_layout
\begin_layout Standard
-Boxes can be inserted with the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Box
-\family default
- or the toolbar button
-\begin_inset Graphics
- filename ../images/box-insert.png
- scale 85
- scaleBeforeRotation
+\begin_inset Float table
+placement !p
+wide false
+sideways false
+status open
-\end_inset
+\begin_layout Plain Layout
+\begin_inset Caption Standard
-.
- A grey box with the label
-\family sans
-Box (Minipage)
-\family default
-:
-\begin_inset Graphics
- filename clipart/BoxInsetDefaultQt4.png
- scale 85
- scaleBeforeRotation
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:This-is-an-tab"
\end_inset
- will be inserted.
- The box type can be specified by right-clicking on the box.
- The appearing box dialog offers the
-\family sans
-Inner
-\begin_inset space ~
+This is an example table caption that is longer than one line to show the
+ different caption format.
+ Here the standard caption format for tables in this document is used.
+\end_layout
+
\end_inset
-Box
-\family default
- types
-\family sans
-Parbox
-\family default
- and
-\family sans
-Minipage
-\family default
-.
- The type
-\family sans
-Minipage
-\family default
- is the default for new boxes and is explained in section
-\begin_inset space ~
+
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="1" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+a
+\end_layout
+
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+b
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Minipages"
+\begin_layout Plain Layout
+c
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+d
+\end_layout
-; the type
-\family sans
-Parbox
-\family default
- is described in section
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+e
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Parboxes"
+\end_inset
+</cell>
+</row>
+</lyxtabular>
\end_inset
-.
+
\end_layout
-\begin_layout Standard
-Boxes are not numbered and can therefore not be referenced like floats or
- footnotes.
+\end_inset
+
+
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\begin_layout Section
+Caption Placement
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
+Caption ! Placement
+\end_layout
-\series bold
-Note:
-\series default
- Boxes must not be the item in an
-\family sans
-Itemize
-\family default
- or
-\family sans
-Description
-\family default
- environment.
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Floats ! Caption Placement
\end_layout
\end_inset
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Caption-Placement"
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+The common caption placement rule is:
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Description
+Figure: Caption is set below the figure
+\end_layout
-\series bold
-Note:
-\series default
- For an unknown reason you can only set the
-\family sans
-Inner
-\begin_inset space ~
-\end_inset
+\begin_layout Description
+Table: Caption is set above the table
+\end_layout
-Box
+\begin_layout Standard
+Having the caption above the table is unfortunately not supported in \SpecialChar LaTeX
+'s
+ standard classes.
+ That means if you are using the document classes
+\family sans
+article
\family default
- type to
+,
\family sans
-None
+book
\family default
- when you use a framed box.
- Boxes without an
+,
\family sans
-Inner
-\begin_inset space ~
+letter
+\family default
+, or
+\family sans
+report
+\family default
+ there will be no space between the caption and the table.
+ To insert the necessary space, load the \SpecialChar LaTeX
+-package
+\series bold
+caption
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! caption
+\end_layout
+
\end_inset
-Box
-\family default
- type and without frames are explained in section
+ in your document preamble with the option
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+See section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sec:Prevent-Hyphenation"
+reference "sec:Caption-Formatting"
\end_inset
+ for more information of the package
+\series bold
+caption
+\series default
.
\end_layout
\end_layout
-\begin_layout Section
-Box Dialog
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Box-Dialog"
+\begin_layout Standard
-\end_inset
+\series bold
+tableposition=top
+\end_layout
+\begin_layout Standard
+If you are using a
+\series bold
+KOMA-Script
+\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Boxes ! Box Dialog
+\SpecialChar LaTeX
+-packages ! KOMA-Script
\end_layout
\end_inset
+ document class (
+\family sans
+article (KOMA-Script)
+\family default
+,
+\family sans
+book (KOMA-Script)
+\family default
+,
+\family sans
+letter (KOMA-Script)
+\family default
+, or
+\family sans
+report (KOMA-Script)
+\family default
-\end_layout
+\begin_inset space \thinspace{}
+\end_inset
-\begin_layout Subsection
-Size
-\begin_inset Index
+), you can alternatively to the
+\series bold
+caption
+\series default
+ package set the document class option
+\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-Boxes ! Size
+That option is used in this document.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-In the box dialog you can adjust the box geometry in the fields
-\family sans
-Width
-\family default
- and
-\family sans
-Height
-\family default
-.
- The available units for the geometry are explained in Table
+
+\series bold
+captions=tableheading
+\end_layout
+
+\begin_layout Standard
+In documents with a KOMA-Script document class you can also right-click
+ on a caption and mark in the context menu if this should be a caption above
+ or below the table/figure.
+ This way you can override the document-wide caption placement for certain
+ captions.
+ Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Units"
+reference "tab:A-caption-marked"
\end_inset
-.
- The field
-\family sans
-Height
-\family default
- offers the following additional sizes:
-\end_layout
-
-\begin_layout Description
-Depth This is the plain text
-\begin_inset Quotes eld
+ is an example where the caption is marked a being below the table while
+ it is above.
+ For comparison the caption in Table
+\begin_inset space ~
\end_inset
-height
-\begin_inset Quotes erd
-\end_inset
-.
- It ignores the total depth when there are multiple text lines in the box:
-\begin_inset Newline newline
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:A-standard-table"
+
\end_inset
+ is not marked.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float table
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption Below
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:A-caption-marked"
-\begin_inset Newline newline
\end_inset
+A caption marked as being below the table.
+\end_layout
-\begin_inset Newline newline
\end_inset
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "12col%"
-special "none"
-height "1in"
-height_special "depth"
-status collapsed
+\end_layout
\begin_layout Plain Layout
\align center
-Box height set to 1
-\begin_inset space \thinspace{}
-\end_inset
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-Depth
+\begin_layout Plain Layout
+1
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+2
+\end_layout
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+3
+\end_layout
-\begin_inset Newline newline
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+Joe
\end_layout
-\begin_layout Description
-Height This is the height of the text that is inside the box.
- A value of e.
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-g.
-\begin_inset space \space{}
-\end_inset
+\begin_layout Plain Layout
+Mary
+\end_layout
-2 for this size will set the box height to 2
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-times the text height:
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "20col%"
-special "none"
-height "2in"
-height_special "height"
-status collapsed
+\begin_layout Plain Layout
+Ted
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\align center
-Box height set to 2
-\begin_inset space \thinspace{}
+\begin_inset Formula $\int x^{2}dx$
\end_inset
-Height
+
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $\left[\begin{array}{cc}
+a & b\\
+c & d
+\end{array}\right]$
+\end_inset
\end_layout
-\begin_layout Description
-Total
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-Height This is the Height
-\begin_inset space \thinspace{}
+\begin_layout Plain Layout
+\begin_inset Formula $1+1=2$
\end_inset
-+
-\begin_inset space \thinspace{}
-\end_inset
-Depth:
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "20col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
+\end_layout
-\begin_layout Plain Layout
-\align center
-Box height set to 1
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+</row>
+</lyxtabular>
-Total
-\begin_inset space ~
\end_inset
-Height
+
\end_layout
\end_inset
\end_layout
-\begin_layout Description
-Width This sets the width of the box as height:
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "12col%"
-special "none"
-height "1in"
-height_special "width"
-status collapsed
+\begin_layout Standard
+\begin_inset Float table
+wide false
+sideways false
+status open
\begin_layout Plain Layout
-\align center
-Box height set to 1
-\begin_inset space \thinspace{}
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:A-standard-table"
+
\end_inset
-Width
+A standard table caption.
\end_layout
\end_inset
\end_layout
-\begin_layout Subsection
-Alignment
-\begin_inset Index
-status collapsed
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Boxes ! Alignment
+1
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+2
+\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+3
\end_layout
-\begin_layout Standard
-When you have chosen an
-\family sans
-Inner
-\begin_inset space ~
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-Box
-\family default
-, the vertical box alignment can be:
+\begin_layout Plain Layout
+Joe
\end_layout
-\begin_layout Description
-Top This is an example text line.
-
-\begin_inset Box Boxed
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "12col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\align center
-This box is top-aligned.
+Mary
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
- This is an example text line.
+\begin_layout Plain Layout
+Ted
\end_layout
-\begin_layout Description
-Middle This is an example text line.
-
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $\int x^{2}dx$
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $\left[\begin{array}{cc}
+a & b\\
+c & d
+\end{array}\right]$
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Formula $1+1=2$
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+It is also possible to set the caption beside a figure or table.
+ To get this the \SpecialChar LaTeX
+-package
+\series bold
+sidecap
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! sidecap
+\end_layout
+
+\end_inset
+
+ has to be loaded in the document preamble with the line
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+usepackage[option]{sidecap}
+\end_layout
+
+\begin_layout Standard
+If you set no option, the caption is placed on the side of the outer page
+ margin – to the right on odd pages, to the left on even pages.
+ You can change the placement to inner margin with the option
+\series bold
+innercaption
+\series default
+.
+ To force the placement always to the right or left, use the option
+\series bold
+rightcaption
+\series default
+ or
+\series bold
+leftcaption
+\series default
+, respectively.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+ifsidecap
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following section will only be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+sidecap
+\series default
+ is installed.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To place in \SpecialChar LyX
+ the caption of a float on the side, it is necessary to add
+ these commands to the document preamble:
+\end_layout
+
+\begin_layout Standard
+\noindent
+\begin_inset CommandInset line
+LatexCommand rule
+offset "0.5ex"
+width "100line%"
+height "1pt"
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+newcommand{
+\backslash
+TabBesBeg}[1][1.0]{%
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+let
+\backslash
+MyTable
+\backslash
+table
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+
+\series medium
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+let
+\backslash
+MyEndtable
+\backslash
+endtable
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+
+\series medium
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+renewenvironment{table}[1]{
+\backslash
+begin{SCtable}[#1]##1}{
+\backslash
+end{SCtable}}}
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+newcommand{
+\backslash
+TabBesEnd}{%
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+let
+\backslash
+table
+\backslash
+MyTable
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+let
+\backslash
+endtable
+\backslash
+MyEndtable
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+newcommand{
+\backslash
+FigBesBeg}[1][1.0]{%
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+let
+\backslash
+MyFigure
+\backslash
+figure
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+let
+\backslash
+MyEndfigure
+\backslash
+endfigure
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+renewenvironment{figure}[1]{
+\backslash
+begin{SCfigure}[#1]##1}{
+\backslash
+end{SCfigure}}}
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+newcommand{
+\backslash
+FigBesEnd}{%
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+let
+\backslash
+figure
+\backslash
+MyFigure
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+let
+\backslash
+endfigure
+\backslash
+MyEndfigure}
+\end_layout
+
+\begin_layout Standard
+\noindent
+\begin_inset CommandInset line
+LatexCommand rule
+offset "0.5ex"
+width "100line%"
+height "1pt"
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The commands allow you to redefine the floats so that the caption is set
+ on the side.
+ For figure floats use the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+FigBesBeg
+\end_layout
+
+\begin_layout Standard
+in \SpecialChar TeX
+ Code before the float.
+ And insert the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+FigBesEnd
+\end_layout
+
+\begin_layout Standard
+in \SpecialChar TeX
+ Code at the point where you want to get back to the original float definitio
+n.
+\end_layout
+
+\begin_layout Standard
+For table floats use the corresponding commands
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+TabBesBeg
+\series default
+ and
+\series bold
+
+\backslash
+TabBesEnd
+\end_layout
+
+\begin_layout Standard
+Figure
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:cap-beside-fig"
+
+\end_inset
+
+ and Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:cap-beside-tab"
+
+\end_inset
+
+ are examples where the caption is set beside.
+\end_layout
+
+\begin_layout Standard
+You can see in the examples that the caption text appears at the top of
+ the floats for table floats and at the bottom for figure floats.
+ To change this, you can use the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+sidecaptionvpos{float type}{placement}
+\end_layout
+
+\begin_layout Standard
+in the document preamble or in \SpecialChar TeX
+ Code before the float.
+ The float type is either
+\family sans
+figure
+\family default
+ or
+\family sans
+table
+\family default
+, the placement can be
+\begin_inset Quotes eld
+\end_inset
+
+
+\family sans
+t
+\family default
+
+\begin_inset Quotes erd
+\end_inset
+
+ for top,
+\begin_inset Quotes eld
+\end_inset
+
+
+\family sans
+c
+\family default
+
+\begin_inset Quotes erd
+\end_inset
+
+ for center, or
+\begin_inset Quotes eld
+\end_inset
+
+
+\family sans
+b
+\family default
+
+\begin_inset Quotes erd
+\end_inset
+
+ for bottom.
+ To have for example the caption of figure floats vertically centered, use
+ the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+sidecaptionvpos{figure}{c}
+\end_layout
+
+\begin_layout Standard
+This was used for Figure
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:cap-beside-fig-2"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace medskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The default caption width is the width of the image/table.
+ For thin image/tables, like in Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:cap-beside-tab"
+
+\end_inset
+
+, this leads to captions that are too thin.
+ You can increase the width by specifying a factor that will be multiplied
+ with the image/table width to get the caption width.
+ The caption width will automatically be recalculated in case it would protrude
+ over the page or column margin due to the specified width.
+ The
+\emph on
+factor
+\emph default
+ can either be given as optional argument for
+\series bold
+
+\backslash
+FigBesBeg
+\series default
+:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+FigBesBeg[factor]
+\end_layout
+
+\begin_layout Standard
+or in the definition of
+\series bold
+
+\backslash
+FigBesBeg
+\series default
+ by replacing the
+\series bold
+1.0
+\series default
+ with another value.
+ If you do the latter, your factor will be the default if
+\series bold
+
+\backslash
+FigBesBeg
+\series default
+ is used without an argument.
+ For Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:cap-beside-tab-wider"
+
+\end_inset
+
+ the factor 5 was used.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ For floats with captions set beside, you cannot use the float placement
+ option
+\family sans
+Here
+\begin_inset space ~
+\end_inset
+
+definitely
+\family default
+ because it is not supported by
+\series bold
+sidecap
+\series default
+.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace medskip
+\end_inset
+
+For more information about the package
+\series bold
+sidecap
+\series default
+ we refer to its documentation
+\begin_inset CommandInset citation
+LatexCommand cite
+key "sidecap"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ The \SpecialChar LaTeX
+-package
+\series bold
+hypcap
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! hypcap
+\end_layout
+
+\end_inset
+
+, described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Reference-Position"
+
+\end_inset
+
+, has no effect on floats with the caption set beside.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+FigBesBeg
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Graphics
+ filename clipart/escher-lsd.eps
+ scale 75
+ scaleBeforeRotation
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:cap-beside-fig"
+
+\end_inset
+
+This is a caption beside a figure.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+FigBesEnd
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+TabBesBeg
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float table
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:cap-beside-tab"
+
+\end_inset
+
+This is a caption beside a table.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+a
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+b
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+c
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+d
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+e
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+f
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+g
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+h
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+i
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+j
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+TabBesEnd
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+FigBesBeg
+\end_layout
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+sidecaptionvpos{figure}{c}
+\end_layout
+
+\end_inset
+
+
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Graphics
+ filename clipart/escher-lsd.eps
+ scale 75
+ scaleBeforeRotation
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:cap-beside-fig-2"
+
+\end_inset
+
+This is a vertically centered caption beside a figure.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+FigBesEnd
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+TabBesBeg[5]
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float table
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:cap-beside-tab-wider"
+
+\end_inset
+
+This caption is wider than the one in Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:cap-beside-tab"
+
+\end_inset
+
+.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="5">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+a
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+b
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+c
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+d
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+e
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+f
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+g
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+h
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+i
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+j
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+TabBesEnd
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+else
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following will be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+sidecap
+\series default
+ is not installed:
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+You need to install the \SpecialChar LaTeX
+-package
+\series bold
+sidecap
+\series default
+ to see the following part of this section in the output.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fi
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Section
+Listings of Floats
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Floats ! Float Lists
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Similar to the table of contents where the sections of the document are
+ listed, there are listings for all float types, like the figures of the
+ documents.
+ You can insert them via the
+\family sans
+Insert\SpecialChar menuseparator
+List
+\begin_inset space ~
+\end_inset
+
+/
+\begin_inset space ~
+\end_inset
+
+TOC
+\family default
+ sub menus.
+\end_layout
+
+\begin_layout Standard
+The list entries are the float captions or its short title, the float number,
+ and the page number where they appear in the document.
+\end_layout
+
+\begin_layout Standard
+You can find the list of figures and tables at the end of this document.
+\end_layout
+
+\begin_layout Chapter
+Notes
+\end_layout
+
+\begin_layout Section
+\SpecialChar LyX
+ Notes
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Notes ! \SpecialChar LyX
+ Notes
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Notes are inserted with the toolbar button
+\begin_inset Info
+type "icon"
+arg "note-insert"
+\end_inset
+
+ or the menu
+\family sans
+Insert\SpecialChar menuseparator
+Note
+\family default
+.
+ There are three types of notes:
+\end_layout
+
+\begin_layout Description
+\SpecialChar LyX
+
+\begin_inset space ~
+\end_inset
+
+Note This note type is for internal notes that won't appear in the output.
+ Its note-box looks like this:
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Graphics
+ filename clipart/LyXNoteImageQt4.png
+ display false
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+This is text in a note box that doesn't appear in the output.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Comment This note also doesn't appear in the output but it appears as \SpecialChar LaTeX
+-comment,
+ when you export the document to \SpecialChar LaTeX
+ via the menu
+\family sans
+File\SpecialChar menuseparator
+Export\SpecialChar menuseparator
+\SpecialChar LaTeX
+ (pdflatex) / (plain)
+\family default
+.
+ Its note-box looks like this:
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Graphics
+ filename clipart/CommentNoteImageQt4.png
+ display false
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+
+
+\begin_inset Note Comment
+status open
+
+\begin_layout Plain Layout
+This is text in a note box that only appears as comment in \SpecialChar LaTeX
+-files.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Greyed
+\begin_inset space ~
+\end_inset
+
+Out This note will appear in the output as grey text.
+ Its note-box looks like this:
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Graphics
+ filename clipart/GreyedOutNoteImageQt4.png
+ display false
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewenvironment{lyxgreyedout}
+\end_layout
+
+\begin_layout Plain Layout
+
+{
+\backslash
+textcolor[gray]{0.8}
+\backslash
+bgroup}{
+\backslash
+egroup}
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+This is text
+\begin_inset Foot
+status open
+
+\begin_layout Plain Layout
+This is an example footnote within a greyed out note.
+\end_layout
+
+\end_inset
+
+ of a comment that appears in the output as grey text.
+\end_layout
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewenvironment{lyxgreyedout}
+\end_layout
+
+\begin_layout Plain Layout
+
+{
+\backslash
+textcolor{blue}
+\backslash
+bgroup}{
+\backslash
+egroup}
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+The greyed out note is here redefined to show it with the original \SpecialChar LyX
+ definition
+ because greyed out notes are redefined in the preamble of this document,
+ as described below, to have blue text.
+\end_layout
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+As you can see in the example, the first line of greyed out notes is a bit
+ indented and greyed out notes can have footnotes.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+When you use the toolbar button
+\begin_inset Info
+type "icon"
+arg "note-insert"
+\end_inset
+
+ to insert notes, a
+\family sans
+\SpecialChar LyX
+
+\begin_inset space ~
+\end_inset
+
+Note
+\family default
+ is inserted.
+ You can switch between the three note types by right-clicking on the note-box.
+
+\family roman
+\series medium
+\bar no
+If you want to turn existing text into a note, mark it and click on the
+ note
+\family default
+\series default
+\bar default
+ toolbar
+\family roman
+\series medium
+\bar no
+button
+\family default
+\series default
+\bar default
+.
+ To change a note to text, press the backspace key when the cursor is in
+ the first position of a note, or press the delete key when the cursor is
+ in the very last position of the note, respectively.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+You can change the text color of the greyed out notes in the menu
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Colors
+\family default
+.
+\end_layout
+
+\begin_layout Section
+Footnotes
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Footnotes"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Notes ! Footnotes
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Footnotes
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Footnotes can be inserted using the toolbar button
+\begin_inset Info
+type "icon"
+arg "footnote-insert"
+\end_inset
+
+ or the menu
+\family sans
+Insert\SpecialChar menuseparator
+Footnote
+\family default
+.
+ You will then see the following footnote-box:
+\begin_inset Graphics
+ filename clipart/footnoteQt4.png
+ scale 80
+ scaleBeforeRotation
+
+\end_inset
+
+
+\family roman
+\series medium
+\bar no
+where you can enter the footnote text.
+ If you want to turn existing text into a footnote, mark it and click on
+ the footnote
+\family default
+\series default
+\bar default
+ toolbar
+\family roman
+\series medium
+\bar no
+button
+\family default
+\series default
+\bar default
+.
+ To change a
+\family roman
+\series medium
+\bar no
+footnote
+\family default
+\series default
+\bar default
+ to text, press the
+\family sans
+Backspace
+\family default
+ key when the cursor is in the first position of a
+\family roman
+\series medium
+\bar no
+footnote
+\family default
+\series default
+\bar default
+, or press the
+\family sans
+Delete
+\family default
+ key when the cursor is in the very last position of the
+\family roman
+\series medium
+\bar no
+footnote
+\family default
+\series default
+\bar default
+, respectively.
+\end_layout
+
+\begin_layout Standard
+Here is an example footnote:
+\family roman
+\series medium
+\bar no
+
+\begin_inset Foot
+status open
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "foot:This-is-an"
+
+\end_inset
+
+This is an example footnote.
+\end_layout
+
+\end_inset
+
+
+\family default
+\series default
+\bar default
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+newcounter{MyRepeatFoot}
+\end_layout
+
+\begin_layout Plain Layout
+
+
+\backslash
+setcounter{MyRepeatFoot}{
+\backslash
+thefootnote}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The footnote will appear in the output as a superscript number at the text
+ position where the footnote box is placed.
+ The footnote text is placed at the bottom of the current page.
+ The footnote number is calculated by \SpecialChar LaTeX
+; the numbers are consecutive.
+ Whether the footnote number is reset for every chapter depends on your
+ document class.
+\end_layout
+
+\begin_layout Standard
+Footnotes can be referenced like floats: Insert a label into the footnote
+ and cross-reference this label in the text as described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Referencing-Floats"
+
+\end_inset
+
+.
+\begin_inset Newline newline
+\end_inset
+
+This is a cross-reference of Footnote
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "foot:This-is-an"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace defskip
+\end_inset
+
+Footnotes in title environments are usually not numbered with symbols and
+ they cannot contain several paragraphs.
+ See for example the footnote in the titling of this document.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace defskip
+\end_inset
+
+Footnotes in tables are not printed by \SpecialChar LaTeX
+ due to technical reasons.
+ However there exists another method to print them: Instead of the footnote
+ the command
+\series bold
+
+\backslash
+footnotemark{}
+\series default
+ is inserted as \SpecialChar TeX
+ code.
+ The text of the footnote is entered as an argument of the \SpecialChar TeX
+ code command
+
+\series bold
+
+\backslash
+footnotetext
+\series default
+ after the table.
+\begin_inset Newline newline
+\end_inset
+
+This was done for the following table with the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+footnotetext{
+\series default
+Printed table footnote.
+\series bold
+}
+\end_layout
+
+\begin_layout Standard
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="1">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+This an example text.
+\begin_inset Foot
+status open
+
+\begin_layout Plain Layout
+This footnote will not be printed!
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+This an example text.
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+footnotemark{}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+footnotetext{
+\end_layout
+
+\end_inset
+
+Printed table footnote.
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Footnotes in longtables are described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Footnotes-in-Longtables"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+Footnotes in minipage boxes are printed, but inside the box and with a different
+ numbering because a minipage box is like a page inside a page.
+ (For more about minipages, see section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Minipages"
+
+\end_inset
+
+.) To get a footnote in the minipage that is output at the bottom of the
+ page like normal footnotes, also use the method of
+\series bold
+
+\backslash
+footnotemark{}
+\series default
+ and
+\series bold
+
+\backslash
+footnotetext
+\series default
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "100col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+This an example text in a minipage.
+\begin_inset Foot
+status open
+
+\begin_layout Plain Layout
+Footnote in the minipage.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+This an example text in a minipage.
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+footnotemark{}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+footnotetext{
+\end_layout
+
+\end_inset
+
+Footnote outside the minipage.
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace defskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To refer to the same footnote several times without printing the footnote
+ text every time, use the command
+\series bold
+
+\backslash
+footnotemark[number]
+\series default
+ in \SpecialChar TeX
+ code.
+\begin_inset Newline newline
+\end_inset
+
+As you do not know the number of the repeating footnote while you are writing
+ the text, you have to store its number.
+ For the following footnote mark example, these commands were inserted in
+ \SpecialChar TeX
+ code after Footnote
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "foot:This-is-an"
+
+\end_inset
+
+ to store the footnote number:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+newcounter{MyRepeatFoot}
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+setcounter{MyRepeatFoot}{
+\backslash
+thefootnote}
+\end_layout
+
+\begin_layout Standard
+The footnote mark was then created with this command:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+footnotemark[
+\backslash
+theMyRepeatFoot]
+\end_layout
+
+\begin_layout Standard
+Here is a repeated footnote:
+\family roman
+\series medium
+\bar no
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+footnotemark[
+\backslash
+theMyRepeatFoot]
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+If you want to repeat the previous footnote, you can omit the storage of
+ the footnote number and just use this command instead:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+footnotemark[
+\backslash
+thefootnote]
+\end_layout
+
+\begin_layout Standard
+Here is another repeated footnote:
+\family roman
+\series medium
+\bar no
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+footnotemark[
+\backslash
+thefootnote]
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Footnote Numbering
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Footnote-Numbering"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Footnotes ! Numbering
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To reset the footnote number back to 1 after each section
+\family roman
+, add this command to your document preamble:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+@addtoreset{footnote}{section}
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+The following preamble command changes the footnote numbering style to small
+ roman numerals:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+renewcommand{
+\backslash
+thefootnote}{
+\backslash
+roman{footnote}}
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+thefootnote}{
+\backslash
+roman{footnote}}
+\end_layout
+
+\end_inset
+
+ This is a footnote with roman numbering:
+\begin_inset Foot
+status open
+
+\begin_layout Plain Layout
+This is an example footnote with roman numbering.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To change the numbering style to capital roman numerals replace in the command
+ above
+\series bold
+
+\backslash
+roman
+\series default
+ by
+\series bold
+
+\backslash
+Roman
+\series default
+.
+ To
+\begin_inset Quotes eld
+\end_inset
+
+number
+\begin_inset Quotes erd
+\end_inset
+
+ footnotes with capital or small Latin letters use
+\series bold
+
+\backslash
+Alph
+\series default
+ or
+\series bold
+
+\backslash
+alph
+\series default
+, respectively.
+ To
+\begin_inset Quotes eld
+\end_inset
+
+number
+\begin_inset Quotes erd
+\end_inset
+
+ footnotes with symbols use
+\series bold
+
+\backslash
+fnsymbol
+\series default
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ You can only number 26 footnotes with Latin letters, because this numbering
+ is limited to single letters.
+\end_layout
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ You can only number 9 footnotes with symbols.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To return to the default numbering style after you have changed to another
+ one, use
+\series bold
+
+\backslash
+arabic
+\series default
+ instead of
+\series bold
+
+\backslash
+roman
+\series default
+ in the command above.
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+thefootnote}{
+\backslash
+arabic{footnote}}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+If you want to have footnotes numbered in the scheme
+\begin_inset Quotes eld
+\end_inset
+
+chapter.footnote
+\begin_inset Quotes erd
+\end_inset
+
+, add the following command to your document preamble:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+numberwithin{footnote}{chapter}
+\end_layout
+
+\begin_layout Standard
+To be able to use the command
+\series bold
+
+\backslash
+numberwithin
+\series default
+, set in the tab
+\family sans
+Math
+\begin_inset space ~
+\end_inset
+
+Options
+\family default
+ in the document settings the option
+\family sans
+Use
+\begin_inset space ~
+\end_inset
+
+AMS
+\begin_inset space ~
+\end_inset
+
+math
+\begin_inset space ~
+\end_inset
+
+package
+\family default
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+numberwithin{footnote}{chapter}
+\end_layout
+
+\end_inset
+
+This is another example footnote:
+\series bold
+
+\begin_inset Foot
+status open
+
+\begin_layout Plain Layout
+This is a footnote numbered in the scheme
+\begin_inset Quotes eld
+\end_inset
+
+chapter.footnote
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\end_inset
+
+
+\series default
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+thefootnote}{
+\backslash
+arabic{footnote}}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+
+\series bold
+
+\backslash
+numberwithin
+\series default
+ always prints out the footnote number as arabic number; previous redefinitions
+ to get non-arabic numbers are overwritten.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+So to get for example the scheme
+\begin_inset Quotes eld
+\end_inset
+
+chapter.
+\backslash
+Roman{footnote}
+\begin_inset Quotes erd
+\end_inset
+
+, use this command instead of
+\series bold
+
+\backslash
+numberwithin
+\series default
+:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+renewcommand{
+\backslash
+thefootnote}{
+\backslash
+thechapter.
+\backslash
+Roman{footnote}}
+\end_layout
+
+\begin_layout Subsection
+Footnote Placement
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Footnotes ! Placement
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+If you have several footnotes in one page, they appear without vertical
+ space between them at the bottom of the page.
+ To make them more readable you can e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+add 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+mm space with the following preamble command:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+let
+\backslash
+myFoot
+\backslash
+footnote
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+renewcommand{
+\backslash
+footnote}[1]{
+\backslash
+myFoot{#1
+\backslash
+vspace{1.5mm}}}
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+In a two-column document the footnotes appear at the bottom of every column,
+ see Figure
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:Standard-footnote-placement"
+
+\end_inset
+
+.
+ If the footnotes should only appear at the bottom of the right column,
+ as in Figure
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:Footnote-placement-in"
+
+\end_inset
+
+, use the \SpecialChar LaTeX
+-package
+\series bold
+ftnright
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! ftnright
+\end_layout
+
+\end_inset
+
+ with this command in the document preamble:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+usepackage{ftnright}
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+placement !h
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+framebox{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Graphics
+ filename clipart/without_fntright.pdf
+ width 100col%
+ scaleBeforeRotation
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:Standard-footnote-placement"
+
+\end_inset
+
+Standard footnote placement in two-column documents.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+placement !h
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+framebox{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Graphics
+ filename clipart/with_fntright.pdf
+ width 100col%
+ scaleBeforeRotation
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:Footnote-placement-in"
+
+\end_inset
+
+Footnote placement in two-column documents when the \SpecialChar LaTeX
+-package
+\series bold
+ftnright
+\series default
+ is used.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+In some scientific literature it is usual to collect the footnotes and print
+ them in a separate paragraph at the end of a section, as in Figure
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:Endnotes"
+
+\end_inset
+
+.
+ They are then called
+\begin_inset Quotes eld
+\end_inset
+
+endnotes
+\begin_inset Quotes erd
+\end_inset
+
+.
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Endnotes
+\end_layout
+
+\end_inset
+
+ To use endnotes instead of footnotes in your document, load in the menu
+
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Modules
+\family default
+the module
+\family sans
+Foot
+\begin_inset space ~
+\end_inset
+
+to
+\begin_inset space ~
+\end_inset
+
+End
+\family default
+.
+ To insert the collected footnotes, insert the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+theendnotes
+\end_layout
+
+\begin_layout Standard
+in \SpecialChar TeX
+ Code at the end of a section or chapter.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Float figure
+wide false
+sideways false
+status open
+
+\begin_layout Plain Layout
+\align center
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+framebox{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Graphics
+ filename clipart/endnotes.pdf
+ scaleBeforeRotation
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:Endnotes"
+
+\end_inset
+
+Endnotes – footnotes are printed in a separate paragraph at the end of sections
+ or chapters.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace medskip
+\end_inset
+
+The paragraph heading for the endnotes isn't automatically translated into
+ the document language, this must be done manually.
+ The following preamble command translates the default English
+\begin_inset Quotes eld
+\end_inset
+
+Notes
+\begin_inset Quotes erd
+\end_inset
+
+ into the German
+\begin_inset Quotes eld
+\end_inset
+
+Anmerkungen
+\begin_inset Quotes erd
+\end_inset
+
+:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+renewcommand{
+\backslash
+notesname}{Anmerkungen}
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace medskip
+\end_inset
+
+The numbering of endnotes can be changed like the footnote numbering as
+ described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Footnote-Numbering"
+
+\end_inset
+
+; just replace the command
+\series bold
+
+\backslash
+thefootnote
+\series default
+ by
+\series bold
+
+\backslash
+theendnote
+\series default
+.
+ To reset the endnote number use the command
+\series bold
+
+\backslash
+@addtoreset
+\series default
+ as described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Footnote-Numbering"
+
+\end_inset
+
+ and replace the command parameter
+\series bold
+footnote
+\series default
+ by
+\series bold
+endnote
+\series default
+.
+\end_layout
+
+\begin_layout Standard
+For endnotes there is the command
+\series bold
+
+\backslash
+endnotemark[number]
+\series default
+ similar to the command
+\series bold
+
+\backslash
+footnotemark
+\series default
+, that is described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Footnotes"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+Footnotes can also be placed in the page margin and the footnote text alignment
+ can be changed, see the \SpecialChar LaTeX
+-package
+\series bold
+footmisc
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! footmisc
+\end_layout
+
+\end_inset
+
+,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "footmisc"
+
+\end_inset
+
+ for more information about this.
+\end_layout
+
+\begin_layout Standard
+For various further footnote formatting issues have a look at \SpecialChar LaTeX
+-books,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "latexcompanion,latexguide,latexbook"
+
+\end_inset
+
+.
+ If you are using a
+\series bold
+KOMA-Script
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! KOMA-Script
+\end_layout
+
+\end_inset
+
+ document class, you can adjust all footnote settings using class-specific
+ commands, see
+\begin_inset CommandInset citation
+LatexCommand cite
+key "KOMA-Script"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Section
+Margin Notes
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Notes ! Margin Notes
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Margin notes look and behave in \SpecialChar LyX
+ like footnotes.
+ They are inserted via the menu
+\family sans
+Insert\SpecialChar menuseparator
+Marginal
+\begin_inset space ~
+\end_inset
+
+Note
+\family default
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "marginalnote-insert"
+\end_inset
+
+.
+ A grey
+\family roman
+\series medium
+box with the
+\family default
+\series default
+ red
+\family roman
+\series medium
+label
+\begin_inset Quotes eld
+\end_inset
+
+margin
+\begin_inset Quotes erd
+\end_inset
+
+ appears where you can enter the text of the margin note.
+\end_layout
+
+\begin_layout Standard
+At the side is an example margin note.
+
+\family roman
+\series medium
+
+\begin_inset Marginal
+status open
+
+\begin_layout Plain Layout
+This is a margin note.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Margin notes appear at the right side in single-sided documents.
+ In double-sided documents they appear in the outer margin – left on even
+ pages, right on odd pages.
+ The text of margin notes is aligned opposite to the outer margin – right-aligne
+d when the note appears in the left margin.
+ The first line of the margin note is placed at the position of the text
+ line where it is inserted in the document.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+To place the margin note in the inner margin, add the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+reversemarginpar
+\end_layout
+
+\begin_layout Standard
+in \SpecialChar TeX
+ Code before a margin note.
+ The new placement is valid for all subsequent margin notes.
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+reversemarginpar
+\end_layout
+
+\end_inset
+
+
+\begin_inset Marginal
+status open
+
+\begin_layout Plain Layout
+This is a margin note in the inner margin.
+\end_layout
+
+\end_inset
+
+
+\series bold
+
+\begin_inset Newline newline
+\end_inset
+
+
+\series default
+
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ There is often not enough space in the inner margin so that the notes are
+ not correctly displayed in the output.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To return to the default placement insert the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+normalmarginpar
+\end_layout
+
+\begin_layout Standard
+in \SpecialChar TeX
+ Code.
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+normalmarginpar
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ The command is ignored when it is within a paragraph where also the command
+
+\series bold
+
+\backslash
+reversemarginpar
+\series default
+ is inserted.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\family roman
+\series medium
+
+\begin_inset Marginal
+status open
+
+\begin_layout Plain Layout
+AVeryLongMarginParWord that isn't hyphenated.
+\end_layout
+
+\end_inset
+
+
+\family default
+\series default
+ Similar to the case described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Multiple-Lines-in"
+
+\end_inset
+
+, long words cannot be hyphenated when they are the first word in a margin
+ note.
+ To avoid this, insert 0
+\begin_inset space \thinspace{}
+\end_inset
+
+pt horizontal space before the word
+\family roman
+\series medium
+.
+
+\begin_inset Marginal
+status open
+
+\begin_layout Plain Layout
+\begin_inset space \hspace*{}
+\length 0pt
+\end_inset
+
+AVeryLongMarginParWord that is hyphenated.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ Margin notes can normally not be used inside tables, floats, and footnotes.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+ifmarginnote
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following section will only be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+marginnote
+\series default
+ is installed.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+This restriction can be evaded by using the \SpecialChar LaTeX
+-package
+\series bold
+marginnote
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! marginnote
+\end_layout
+
+\end_inset
+
+.
+ By adding these two lines to your document preamble, the command used by
+ \SpecialChar LyX
+ for margin notes is redefined to use the command provided by the
+\series bold
+marginnote
+\series default
+-package:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+usepackage{marginnote}
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+let
+\backslash
+marginpar
+\backslash
+marginnote
+\end_layout
+
+\begin_layout Standard
+This is also used in this document because
+\series bold
+marginnote
+\series default
+ has another useful feature: You can set a vertical offset for the note.
+ This is often needed when too many margin notes are too close together
+ or for a better page layout.
+ The offset is set in \SpecialChar LyX
+ as \SpecialChar TeX
+ Code directly after the margin note in the scheme
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+[offset]
+\end_layout
+
+\begin_layout Standard
+where the offset is a length with one of the units listed in Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Units"
+
+\end_inset
+
+.
+ A negative value shifts the note up, a positive value shifts it down.
+
+\family roman
+\series medium
+For example the margin note beside this text line is shifted up 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+cm with the \SpecialChar TeX
+ Code command
+\begin_inset Quotes eld
+\end_inset
+
+
+\family default
+\series bold
+[-1.5cm]
+\family roman
+\series medium
+
+\begin_inset Quotes erd
+\end_inset
+
+
+\begin_inset Marginal
+status open
+
+\begin_layout Plain Layout
+This margin note is shifted up 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+cm from its original position.
+\end_layout
+
+\end_inset
+
+
+\family default
+\series default
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+[-1.5cm]
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace medskip
+\end_inset
+
+With
+\series bold
+marginnote
+\series default
+ you can also change the alignment of the text in the margin note.
+ For example the commands
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+renewcommand*{
+\backslash
+raggedleftmarginnote}{
+\backslash
+centering}
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+renewcommand*{
+\backslash
+raggedrightmarginnote}{
+\backslash
+centering}
+\end_layout
+
+\begin_layout Standard
+set the alignment to centered.
+
+\series bold
+
+\backslash
+raggedleftmarginnote
+\series default
+ denotes margin notes that appear at the left side.
+\family roman
+\series medium
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand*{
+\backslash
+raggedleftmarginnote}{
+\backslash
+centering}
+\end_layout
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand*{
+\backslash
+raggedrightmarginnote}{
+\backslash
+centering}
+\end_layout
+
+\end_inset
+
+
+\begin_inset Marginal
+status open
+
+\begin_layout Plain Layout
+The text of this margin note is centered.
+\end_layout
+
+\end_inset
+
+
+\family default
+\series default
+ The default is
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+renewcommand*{
+\backslash
+raggedleftmarginnote}{
+\backslash
+raggedleft}
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+renewcommand*{
+\backslash
+raggedrightmarginnote}{
+\backslash
+raggedright}
+\family roman
+\series medium
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand*{
+\backslash
+raggedleftmarginnote}{
+\backslash
+raggedleft}
+\end_layout
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand*{
+\backslash
+raggedrightmarginnote}{
+\backslash
+raggedright}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace medskip
+\end_inset
+
+For the other features of
+\series bold
+marginnote
+\series default
+ refer to its documentation
+\begin_inset CommandInset citation
+LatexCommand cite
+key "marginnote"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+You can adjust the layout of margin notes by changing its definition.
+ To create for example a header for all margin notes with the underlined,
+ sans-serif, and bold header text
+\begin_inset Quotes eld
+\end_inset
+
+
+\family sans
+\series bold
+\bar under
+Attention!
+\family default
+\series default
+\bar default
+
+\begin_inset Quotes erd
+\end_inset
+
+, add this to your document preamble:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+let
+\backslash
+myMarginpar
+\backslash
+marginpar
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+renewcommand{
+\backslash
+marginpar}[1]{
+\backslash
+myMarginpar{%
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+hspace{0pt}
+\backslash
+textsf{
+\backslash
+textbf{
+\backslash
+underbar{Attention!}}}%
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\backslash
+vspace{1.5mm}
+\backslash
+
+\backslash
+#1}}
+\end_layout
+
+\begin_layout Standard
+
+\family roman
+\series medium
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+let
+\backslash
+myMarginpar
+\backslash
+marginpar
+\end_layout
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+marginpar}[1]{
+\backslash
+myMarginpar{%
+\end_layout
+
+\begin_layout Plain Layout
+
+
+\backslash
+textsf{
+\backslash
+textbf{
+\backslash
+underbar{Attention!}}}%
+\end_layout
+
+\begin_layout Plain Layout
+
+
+\backslash
+vspace{1.5mm}
+\backslash
+
+\backslash
+#1}}
+\end_layout
+
+\end_inset
+
+
+\begin_inset Marginal
+status open
+
+\begin_layout Plain Layout
+This is a margin note with a defined heading.
+\end_layout
+
+\end_inset
+
+
+\family default
+\series default
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+[-1.5cm]
+\end_layout
+
+\end_inset
+
+
+\family roman
+\series medium
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+renewcommand{
+\backslash
+marginpar}[1]{
+\backslash
+myMarginpar{#1}}
+\end_layout
+
+\end_inset
+
+
+\family default
+\series default
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+The margin note format is changed only for this example.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+else
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following will be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+marginnote
+\series default
+ is not installed:
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+You need to install the \SpecialChar LaTeX
+-package
+\series bold
+marginnote
+\series default
+ to see the following part of this section in the output.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fi
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Chapter
+Boxes
+\end_layout
+
+\begin_layout Section
+Introduction
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Introduction
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Boxes are used to format a block of text.
+ Boxes can be used to write documents with multiple languages, see section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Minipages"
+
+\end_inset
+
+, to frame texts, see section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Decoration"
+
+\end_inset
+
+, to prevent words from being hyphenated, see section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Prevent-Hyphenation"
+
+\end_inset
+
+, to align text, see section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Vertical-Alignment"
+
+\end_inset
+
+, or to set the background color of texts, see section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Colored-Boxes"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+Boxes can be inserted with the menu
+\family sans
+Insert\SpecialChar menuseparator
+Box
+\family default
+ or the toolbar button
+\begin_inset Info
+type "icon"
+arg "box-insert Frameless"
+\end_inset
+
+.
+ A grey box with the label
+\family sans
+Box (Minipage)
+\family default
+:
+\begin_inset Graphics
+ filename clipart/BoxInsetDefaultQt4.png
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+
+ will be inserted.
+ The box type can be specified by right-clicking on the box and selecting
+
+\family sans
+Settings
+\family default
+.
+ The box dialog offers the
+\family sans
+Inner
+\begin_inset space ~
+\end_inset
+
+Box
+\family default
+ types
+\family sans
+Makebox
+\family default
+,
+\family sans
+Parbox
+\family default
+ and
+\family sans
+Minipage
+\family default
+.
+ The type
+\family sans
+Minipage
+\family default
+ is the default for new boxes and is explained in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Minipages"
+
+\end_inset
+
+; the type
+\family sans
+Parbox
+\family default
+ is described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Parboxes"
+
+\end_inset
+
+ and the type
+\family sans
+Makebox
+\family default
+ in
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Prevent-Hyphenation"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+Boxes are not numbered and can therefore not be referenced like floats or
+ footnotes.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ Boxes must not be the item in an
+\family sans
+Itemize
+\family default
+ or
+\family sans
+Description
+\family default
+ environment.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ For an unknown reason you can only set the
+\family sans
+Inner
+\begin_inset space ~
+\end_inset
+
+Box
+\family default
+ type to
+\family sans
+None
+\family default
+ when you use a framed box.
+ Boxes without an
+\family sans
+Inner
+\begin_inset space ~
+\end_inset
+
+Box
+\family default
+ type and without frames are explained in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Prevent-Hyphenation"
+
+\end_inset
+
+.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Section
+Box Dialog
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Box-Dialog"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Box Dialog
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Size
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Size
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+In the box dialog you can adjust the box geometry in the fields
+\family sans
+Width
+\family default
+ and
+\family sans
+Height
+\family default
+.
+ The available units for the geometry are explained in Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Units"
+
+\end_inset
+
+.
+ The field
+\family sans
+Height
+\family default
+ offers the following additional sizes:
+\end_layout
+
+\begin_layout Description
+Depth This is the plain text
+\begin_inset Quotes eld
+\end_inset
+
+height
+\begin_inset Quotes erd
+\end_inset
+
+.
+ It ignores the total depth when there are multiple text lines in the box:
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1in"
+height_special "depth"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Box height set to 1
+\begin_inset space \thinspace{}
+\end_inset
+
+Depth
+\end_layout
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Height This is the height of the text that is inside the box.
+ A value of e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+2 for this size will set the box height to 2
+\begin_inset space ~
+\end_inset
+
+times the text height:
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "20col%"
+special "none"
+height "2in"
+height_special "height"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Box height set to 2
+\begin_inset space \thinspace{}
+\end_inset
+
+Height
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Total
+\begin_inset space ~
+\end_inset
+
+Height This is the Height
+\begin_inset space \thinspace{}
+\end_inset
+
++
+\begin_inset space \thinspace{}
+\end_inset
+
+Depth:
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "20col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Box height set to 1
+\begin_inset space \thinspace{}
+\end_inset
+
+Total
+\begin_inset space ~
+\end_inset
+
+Height
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Width This sets the width of the box as height:
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1in"
+height_special "width"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Box height set to 1
+\begin_inset space \thinspace{}
+\end_inset
+
+Width
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Alignment
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Alignment
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+When you have chosen an
+\family sans
+Inner
+\begin_inset space ~
+\end_inset
+
+Box
+\family default
+, the vertical box alignment can be:
+\end_layout
+
+\begin_layout Description
+Top This is an example text line.
+
+\begin_inset Box Boxed
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+This box is top-aligned.
+\end_layout
+
+\end_inset
+
+ This is an example text line.
+\end_layout
+
+\begin_layout Description
+Middle This is an example text line.
+
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+This box is middle-aligned.
+\end_layout
+
+\end_inset
+
+ This is an example text line.
+\end_layout
+
+\begin_layout Description
+Bottom This is an example text line.
+
+\begin_inset Box Boxed
+position "b"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+This box is bottom-aligned.
+\end_layout
+
+\end_inset
+
+ This is an example text line.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ The vertical box alignment can be lost in the output when you have two
+ boxes in a line and one has e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+a shadow and the other one not.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The horizontal box alignment can be set via \SpecialChar LyX
+'s paragraph dialog when you
+ set the box into its own paragraph.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+When you have chosen an
+\family sans
+Inner
+\begin_inset space ~
+\end_inset
+
+Box
+\family default
+, the box content can be aligned vertically to:
+\end_layout
+
+\begin_layout Description
+top This is an example text line.
+
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1.5in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+This box text is top-aligned.
+\end_layout
+
+\end_inset
+
+ This is an example text line.
+\end_layout
+
+\begin_layout Description
+middle This is an example text line.
+
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1.5in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+This box text is middle-aligned.
+\end_layout
+
+\end_inset
+
+ This is an example text line.
+\end_layout
+
+\begin_layout Description
+bottom This is an example text line.
+
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "b"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1.5in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+This box text is bottom-aligned.
+\end_layout
+
+\end_inset
+
+ This is an example text line.
+\end_layout
+
+\begin_layout Description
+stretch This is an example text line.
+
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "s"
+use_parbox 0
+use_makebox 0
+width "12col%"
+special "none"
+height "1.5in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+This box
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+text is
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+stretched.
+\end_layout
+
+\end_inset
+
+ This is an example text line.
+\end_layout
+
+\begin_layout Standard
+To stretch the box content, it must consist of more than one paragraph.
+ In the example above every text line is in an own paragraph.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+To align the box content horizontally you can use \SpecialChar LyX
+'s paragraph dialog when
+ you have chosen an
+\family sans
+Inner
+\begin_inset space ~
+\end_inset
+
+Box
+\family default
+.
+\end_layout
+
+\begin_layout Standard
+\align center
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "s"
+use_parbox 0
+use_makebox 0
+width "15col%"
+special "none"
+height "1.25in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align left
+This box
+\end_layout
+
+\begin_layout Plain Layout
+\align center
+text is
+\end_layout
+
+\begin_layout Plain Layout
+\align right
+stretched.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+If you have not set an
+\family sans
+Inner
+\begin_inset space ~
+\end_inset
+
+Box
+\family default
+, you can align the box content horizontally in the box dialog.
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\align center
+\begin_inset Box Boxed
+position "c"
+hor_pos "s"
+has_inner_box 0
+inner_pos "s"
+use_parbox 0
+use_makebox 0
+width "90col%"
+special "none"
+height "1.25in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+This box text is horizontally stretched.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Decoration
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Decoration"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Decoration
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The type of the box can be specified in the box dialog in the drop-down
+ list
+\family sans
+Decoration
+\family default
+.
+ The following types are possible:
+\end_layout
+
+\begin_layout Description
+No
+\begin_inset space ~
+\end_inset
+
+frame Nothing is drawn.
+\end_layout
+
+\begin_layout Description
+Simple
+\begin_inset space ~
+\end_inset
+
+rectangular
+\begin_inset space ~
+\end_inset
+
+frame This draws a rectangular frame around the box.
+ The frame line thickness can be specified.
+
+\begin_inset Box Boxed
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "20col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Rectangular box
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Oval
+\begin_inset space ~
+\end_inset
+
+box,
+\begin_inset space ~
+\end_inset
+
+thin This draws an oval frame around the box.
+ The frame line thickness has the size 0.4
+\begin_inset space \thinspace{}
+\end_inset
+
+pt.
+
+\begin_inset Box ovalbox
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "20col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Oval box, thin
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Oval
+\begin_inset space ~
+\end_inset
+
+box,
+\begin_inset space ~
+\end_inset
+
+thick This draws an oval frame around the box.
+ The frame line thickness has the size 0.8
+\begin_inset space \thinspace{}
+\end_inset
+
+pt.
+
+\begin_inset Box Ovalbox
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "20col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Oval box, thick
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Drop
+\begin_inset space ~
+\end_inset
+
+shadow This draws a rectangular frame with a shadow around the box.
+ The frame line thickness and the shadow can be specified.
+
+\begin_inset Box Shadowbox
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "20col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Shadow box
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Shaded
+\begin_inset space ~
+\end_inset
+
+background This draws a box with a red background.
+ Unlike colored boxes
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+see sec.
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Colored-Boxes"
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+, it always uses the whole column width and the box is set as its own paragraph.
+
+\begin_inset Box Shaded
+position "t"
+hor_pos "c"
+has_inner_box 0
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "50col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+Shaded background box
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Double
+\begin_inset space ~
+\end_inset
+
+rectangular
+\begin_inset space ~
+\end_inset
+
+frame This draws a double-line rectangular frame around the box.
+ The line thickness of the inner frame is 0.75
+\begin_inset space \thinspace{}
+\end_inset
+
+line
+\begin_inset space ~
+\end_inset
+
+thickness, the thickness of the outer frame is 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+line
+\begin_inset space ~
+\end_inset
+
+thickness.
+ The distance between the lines is 1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+line
+\begin_inset space ~
+\end_inset
+
+thickness
+\begin_inset space \thinspace{}
+\end_inset
+
++
+\begin_inset space \thinspace{}
+\end_inset
+
+0.5
+\begin_inset space \thinspace{}
+\end_inset
+
+pt.
+
+\begin_inset Box Doublebox
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "20col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+\align center
+Double rectangular box
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+\SpecialChar LyX
+'s box label will reflect the different frame types.
+ To be able to use all types, the \SpecialChar LaTeX
+-package
+\series bold
+fancybox
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! fancybox
+\end_layout
+
+\end_inset
+
+ must be installed.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+When you use the decoration
+\family sans
+simple rectangular frame
+\family default
+ and no inner box, you can allow page breaks within a box.
+ Note that then, unlike other framed boxes, the frame always uses the whole
+ column width and the box is set as its own paragraph:
+\begin_inset Box Framed
+position "t"
+hor_pos "c"
+has_inner_box 0
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "100col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+Allow page break box
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Section
+Box Customization
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Customization
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The diameter of the round corners of the oval boxes can be set with the
+ command
+\series bold
+
+\backslash
+cornersize
+\series default
+.
+ The command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+cornersize*{1cm}
+\end_layout
+
+\begin_layout Standard
+sets the diameter to 1
+\begin_inset space \thinspace{}
+\end_inset
+
+cm.
+ The command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+cornersize{num}
+\end_layout
+
+\begin_layout Standard
+sets the diameter to
+\family sans
+num
+\begin_inset space \thinspace{}
+\end_inset
+
+×
+\begin_inset space \thinspace{}
+\end_inset
+
+minimum(width and height of box)
+\family default
+.
+ The default is
+\series bold
+
+\backslash
+cornersize{0.5}
+\series default
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+cornersize*{1.5cm}
+\end_layout
+
+\end_inset
+
+
+\begin_inset Box Ovalbox
+position "c"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "25col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+\align center
+Oval box with
+\series bold
+
+\backslash
+cornersize
+\series default
+
+\begin_inset space \thinspace{}
+\end_inset
+
+=
+\begin_inset space \thinspace{}
+\end_inset
+
+1.5
+\begin_inset space \thinspace{}
+\end_inset
+
+cm
+\end_layout
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+cornersize{0.5}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The default background color red of
+\family sans
+shaded background
+\family default
+ boxes can either be changed locally with the command
+\series bold
+
+\backslash
+definecolor{shadecolor}
+\series default
+ or globally with the menu
+\family sans
+Tools\SpecialChar menuseparator
+Preferences\SpecialChar menuseparator
+Colors\SpecialChar menuseparator
+shaded
+\begin_inset space ~
+\end_inset
+
+box
+\family default
+.
+ The scheme of the
+\series bold
+
+\backslash
+definecolor
+\series default
+ command is explained in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Colored-Tables"
+
+\end_inset
+
+.
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+Note that
+\series bold
+
+\backslash
+definecolor
+\series default
+ requires the \SpecialChar LaTeX
+-package
+\series bold
+color
+\series default
+ in the preamble, see section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Colored-Boxes"
+
+\end_inset
+
+.
+\end_layout
+
+\end_inset
+
+ For example the appearance of the following shaded background box is set
+ with the \SpecialChar TeX
+ Code command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+definecolor{shadecolor}{cmyk}{0.5,0,1,0.5}
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+definecolor{shadecolor}{cmyk}{0.5,0,1,0.5}
+\end_layout
+
+\end_inset
+
+
+\begin_inset Box Shaded
+position "t"
+hor_pos "c"
+has_inner_box 0
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width "100col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+
+\color yellow
+This is yellow text in a
+\color none
+
+\family sans
+\color yellow
+shaded background
+\family default
+\color none
+
+\color yellow
+box with dark green background.
+\end_layout
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+definecolor{shadecolor}{rgb}{1,0,0}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+Manually changed sizes and colors are valid for all boxes following the
+ commands that change them.
+\end_layout
+
+\begin_layout Section
+Minipages
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Minipages"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Minipages
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Minipages are treated by \SpecialChar LaTeX
+ as pages within pages and can therefore for example
+ have their own footnotes.
+\end_layout
+
+\begin_layout Standard
+Minipages are useful when you write documents with different languages.
+\end_layout
+
+\begin_layout Standard
+Below are two example minipages side by side.
+ Their width is set to 45
+\begin_inset space \thinspace{}
+\end_inset
+
+col% and they are separated by a horizontal fill, that was inserted via
+ the menu
+\family sans
+Insert\SpecialChar menuseparator
+Special
+\begin_inset space ~
+\end_inset
+
+Formatting\SpecialChar menuseparator
+Horizontal
+\begin_inset space ~
+\end_inset
+
+Fill
+\family default
+.
+\begin_inset Newpage newpage
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "45col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+
+\lang ngerman
+Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+
+\lang ngerman
+Dies ist eine deutsche Fußnote.
+\end_layout
+
+\end_inset
+
+.
+ Dies ist ein deutscher Text.
+ Dies ist ein deutscher Text.
+\end_layout
+
+\end_inset
+
+
+\begin_inset space \hfill{}
+\end_inset
+
+
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "c"
+use_parbox 0
+use_makebox 0
+width "45col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+ This is an English Text.
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+This is an English footnote.
+\end_layout
+
+\end_inset
+
+ This is an English Text.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+The document-wide paragraph settings are ignored within minipages.
+ That means that there will be no space between paragraphs in minipages
+ although you set it to e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+
+\family sans
+MedSkip
+\family default
+ in the document settings.
+\end_layout
+
+\begin_layout Standard
+Minipages can also be used to set a background color for text parts, see
+ section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Colored-Boxes"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ You cannot have floats or margin notes inside minipages but minipages can
+ be used inside tables, floats, and other boxes.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\SpecialChar LyX
+ has also basic support for minipages whose size is automatically determined
+ by the width of their contents, via the module
+\family sans
+Variable-width Minipages
+\family default
+.
+ The \SpecialChar LyX
+ example file
+\emph on
+varwidth-floats-side-by-side
+\emph default
+ gives examples of variable-width minipages used for placing two floats
+ side-by-side.
+\end_layout
+
+\begin_layout Section
+Parboxes
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Parboxes"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Parboxes
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Parboxes are very similar to minipages with the difference that they cannot
+ have footnotes.
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\align center
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 1
+use_makebox 0
+width "33col%"
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+This a text within a parbox.
+ This a text within a parbox.
+\end_layout
+
+\begin_layout Plain Layout
+This footnote won't appear:
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+This footnote is inside a parbox and will therefore not appear.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Section
+Boxes for Words and Characters
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! for Characters
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Prevent Hyphenation
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Prevent-Hyphenation"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! to Prevent Hyphenation
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+You can use the box type
+\family sans
+Makebox
+\family default
+ to prevent words or text from being hyphenated.
+\begin_inset Newline newline
+\end_inset
+
+Here is an example text:
+\end_layout
+
+\begin_layout Standard
+This line is an example to show how you can prevent the hyphenation of
+\begin_inset Quotes eld
+\end_inset
+
+veryverylongword
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+To prevent the hyphenation of the word
+\begin_inset Quotes eld
+\end_inset
+
+veryverylongword
+\begin_inset Quotes erd
+\end_inset
+
+, put the word into a box, set the
+\family sans
+Inner
+\begin_inset space ~
+\end_inset
+
+box
+\family default
+ to
+\family sans
+Makebox
+\family default
+ and use no explicit width.
+\end_layout
+
+\begin_layout Standard
+This is the result:
+\end_layout
+
+\begin_layout Standard
+This line is an example to show how you can prevent the hyphenation of
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 1
+width ""
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+\begin_inset Quotes eld
+\end_inset
+
+veryverylongword
+\begin_inset Quotes erd
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+You can alternatively set the command
+\begin_inset Quotes eld
+\end_inset
+
+
+\series bold
+
+\backslash
+-
+\series default
+
+\begin_inset Quotes grd
+\end_inset
+
+ as \SpecialChar TeX
+ Code directly before the word:
+\end_layout
+
+\begin_layout Standard
+This line is an example to show how you can prevent the hyphenation of
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+-
+\end_layout
+
+\end_inset
+
+veryverylongword
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+Of course the word now protrudes over the side margin.
+ To avoid this, add via the menu
+\family sans
+Insert\SpecialChar menuseparator
+Formatting\SpecialChar menuseparator
+Ragged
+\begin_inset space ~
+\end_inset
+
+Line
+\begin_inset space ~
+\end_inset
+
+Break
+\family default
+ (shortcut
+\begin_inset Info
+type "shortcut"
+arg "newline-insert newline"
+\end_inset
+
+) a line break before the word:
+\end_layout
+
+\begin_layout Standard
+This line is an example to show how you can prevent the hyphenation of
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 1
+width ""
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status open
+
+\begin_layout Plain Layout
+\begin_inset Quotes eld
+\end_inset
+
+veryverylongword
+\begin_inset Quotes erd
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Subsection
+Vertical Alignment
+\begin_inset CommandInset label
+LatexCommand label
+name "subsec:Vertical-Alignment"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! for Vertical Alignment
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Raiseboxes
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+With the help of the command
+\series bold
+
+\backslash
+raisebox
+\series default
+ you can align words, characters or other boxes vertically relative to the
+ surrounding text.
+
+\series bold
+
+\backslash
+raisebox
+\series default
+ is used with the following scheme:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+raisebox{lift}[height][depth]{box content}
+\end_layout
+
+\begin_layout Standard
+The lift can be a positive value to raise the box or a negative value to
+ lower the box.
+\end_layout
+
+\begin_layout Standard
+To align for example the word
+\begin_inset Quotes eld
+\end_inset
+
+preventing
+\begin_inset Quotes erd
+\end_inset
+
+ so that the bottom of the
+\begin_inset Quotes eld
+\end_inset
+
+deepest
+\begin_inset Quotes erd
+\end_inset
+
+ character
+\begin_inset Quotes eld
+\end_inset
+
+p
+\begin_inset Quotes erd
+\end_inset
+
+ is at the baseline, insert the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+raisebox{
+\backslash
+depth}{
+\end_layout
+
+\begin_layout Standard
+in \SpecialChar TeX
+ Code before the word.
+ After the word insert a closing brace
+\begin_inset Quotes eld
+\end_inset
+
+
+\series bold
+}
+\series default
+
+\begin_inset Quotes erd
+\end_inset
+
+ in \SpecialChar TeX
+ Code.
+\begin_inset Newline newline
+\end_inset
+
+This is the result:
+\end_layout
+
+\begin_layout Standard
+This is a text line with the word
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+raisebox{
+\backslash
+depth}{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+preventing
+\begin_inset Quotes erd
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+ as a raised word.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+When you raise or lower characters in a line, the line distance will be
+ spread:
+\end_layout
+
+\begin_layout Standard
+This is a text line with the word
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+raisebox{-
+\backslash
+depth}{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+preventing
+\begin_inset Quotes erd
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+ as a lowered word.
+\begin_inset Newline newline
+\end_inset
+
+This is a text line with the word
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+raisebox{0.5cm}{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+testing
+\begin_inset Quotes erd
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+ as a raised word.
+\end_layout
+
+\begin_layout Standard
+If you want to prevent this for a certain reason, set the box height to
+ a zero value.
+ For example use
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+raisebox{-
+\backslash
+depth}[0pt]{
+\end_layout
+
+\begin_layout Standard
+This is a text line with the word
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+raisebox{-
+\backslash
+depth}[0pt]{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+preventing
+\begin_inset Quotes erd
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+ as a lowered word.
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+This is a text line with the word
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+raisebox{0.5cm}[0pt]{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+testing
+\begin_inset Quotes erd
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+ as a raised word.
+\end_layout
+
+\begin_layout Section
+Colored Boxes
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Colored-Boxes"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! Color
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To color the background of a box just select the color you like in the box
+ dialog.
+ This is for example a box with orange background:
+\begin_inset Box Frameless
+position "t"
+hor_pos "c"
+has_inner_box 1
+inner_pos "t"
+use_parbox 0
+use_makebox 1
+width ""
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "orange"
+status open
+
+\begin_layout Plain Layout
+Box with orange background
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+If you use the decoration
+\family sans
+Simple
+\begin_inset space ~
+\end_inset
+
+rectangular
+\begin_inset space ~
+\end_inset
+
+frame
+\family default
+ you can set a frame color.
+ In this case you must also specify a background color (LyX sets white as
+ default).
+ Here is an example:
+\begin_inset Box Boxed
+position "t"
+hor_pos "c"
+has_inner_box 0
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width ""
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "teal"
+backgroundcolor "yellow"
+status open
+
+\begin_layout Plain Layout
+Box with teal frame color and yellow background color
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+Of course you can also have colored text inside a colored box:
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Box Boxed
+position "t"
+hor_pos "c"
+has_inner_box 0
+inner_pos "t"
+use_parbox 0
+use_makebox 0
+width ""
+special "none"
+height "1in"
+height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "cyan"
+backgroundcolor "magenta"
+status open
+
+\begin_layout Plain Layout
+
+\color yellow
+This is colored text within a colored, framed box
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+If you need another color than the predefined ones, you can define your
+ own color as described in section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Colored-Tables"
+
+\end_inset
+
+.
+ To use your own color you must typeset the box by using TeX code:
+\end_layout
+
+\begin_layout Standard
+Colored boxes without frame are created with the command
+\series bold
+
+\backslash
+colorbox
+\series default
+.
+ It has the following scheme:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+colorbox{color}{box content}
+\end_layout
+
+\begin_layout Standard
+The box content can also be a box and colored boxes can also be within other
+ boxes.
+ To have e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+a darkgreen background for a word, insert the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+colorbox{darkgreen}{
+\end_layout
+
+\begin_layout Standard
+before the word in \SpecialChar TeX
+ Code.
+ After the word insert a closing brace
+\begin_inset Quotes eld
+\end_inset
+
+
+\series bold
+}
+\series default
+
+\begin_inset Quotes erd
+\end_inset
+
+ in \SpecialChar TeX
+ Code.
+\begin_inset Newline newline
+\end_inset
+
+This is the result:
+\end_layout
+
+\begin_layout Standard
+This is a line where the word
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+colorbox{darkgreen}{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+Attention!
+\begin_inset Quotes erd
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+ has a darkgreen background.
+\end_layout
+
+\begin_layout Standard
+Framed, colored boxes are created with the command
+\series bold
+
+\backslash
+fcolorbox
+\series default
+.
+ It has the following scheme:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+fcolorbox{frame color}{box color}{box content}
+\end_layout
+
+\begin_layout Section
+Rotated and Scaled Boxes
+\end_layout
+
+\begin_layout Standard
+To use the boxes described in this section, the module
+\family sans
+GraphicBoxes
+\family default
+ must be loaded in the document settings.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ Not all DVI viewers are able to display rotated or scaled material.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ Floats are not allowed inside a rotated or scaled box.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Rotated Boxes
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! rotated
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Rotated Material
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To rotate material, you can put it into a
+\family sans
+Rotatebox
+\family default
+.
+ Such a box is inserted via the menu
+\family sans
+Insert\SpecialChar menuseparator
+Custom Insets\SpecialChar menuseparator
+Rotatebox
+\family default
+.
+\end_layout
+
+\begin_layout Standard
+The rotation origin can be specified via the inset
+\family sans
+Origin
+\family default
+ (menu
+\family sans
+Insert\SpecialChar menuseparator
+Origin
+\family default
+) in the form
+\series bold
+origin=position
+\series default
+.
+ The following positions are possible:
+\emph on
+c
+\emph default
+ (center),
+\emph on
+l
+\emph default
+ (left),
+\emph on
+r
+\emph default
+ (right),
+\emph on
+b
+\emph default
+ (bottom),
+\emph on
+t
+\emph default
+ (top), along with meaningful combinations of the four base positions.
+ For example
+\emph on
+lt
+\emph default
+ means that the rotation origin is at the top left corner of the box.
+ When no rotation origin is specified, the position
+\emph on
+l
+\emph default
+ will be used.
+ The rotation angle is a number that can be negative that specifies the
+ angle in degrees.
+ The rotation direction is counterclockwise.
+\end_layout
+
+\begin_layout Standard
+In the following example
+\series bold
+origin=c
+\series default
+ was inserted to the
+\family sans
+Option
+\family default
+ inset and
+\series bold
+60
+\series default
+ was inserted to the
+\family sans
+Angle
+\family default
+ inset.
+\end_layout
+
+\begin_layout Standard
+This is a line
+\begin_inset Flex Rotatebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+origin=c
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+60
+\end_layout
+
+\end_inset
+
+with rotated
+\end_layout
+
+\end_inset
+
+ text.
+\end_layout
+
+\begin_layout Standard
+The box content can also be another box or an inline formula:
+\end_layout
+
+\begin_layout Standard
+This is a line
+\begin_inset Flex Rotatebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+origin=r
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+-60
+\end_layout
+
+\end_inset
+
+
+\begin_inset Box Doublebox
+position "c"
+hor_pos "c"
+has_inner_box 0
+inner_pos "c"
use_parbox 0
-width "12col%"
-special "none"
+use_makebox 0
+width "1in"
+special "width"
height "1in"
height_special "totalheight"
+thickness "0.4pt"
+separation "3pt"
+shadowsize "4pt"
+framecolor "black"
+backgroundcolor "none"
+status collapsed
+
+\begin_layout Plain Layout
+with rotated
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+ framed text
+\begin_inset Flex Rotatebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+origin=lb
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+60
+\end_layout
+
+\end_inset
+
+
+\begin_inset Formula $\int A\,\mathrm{d}x=B$
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+ and a formula.
+\end_layout
+
+\begin_layout Standard
+or an image or table:
+\end_layout
+
+\begin_layout Standard
+This is a line
+\begin_inset Flex Rotatebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+origin=lb
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+90
+\end_layout
+
+\end_inset
+
+
+\begin_inset Graphics
+ filename clipart/platypus.eps
+ lyxscale 50
+ width 25col%
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+ with a rotated image
+\begin_inset Flex Rotatebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+-90
+\end_layout
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+q
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+w
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+e
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+r
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+ and table.
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Figures ! rotated
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table Customization ! Rotating
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ If the
+\family sans
+Angle
+\family default
+ inset is empty or contains other characters than numbers you will get \SpecialChar LaTeX
+
+ errors when viewing/exporting the document.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Scaled Boxes
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Boxes ! scaled
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Scaled Material
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To scale material put it into a
+\family sans
+Scalebox
+\family default
+.
+ Such a box is inserted via the menu
+\family sans
+Insert\SpecialChar menuseparator
+Custom Insets\SpecialChar menuseparator
+Scalebox
+\family default
+.
+\end_layout
+
+\begin_layout Standard
+The
+\family sans
+Scalebox
+\family default
+ inset has the mandatory inset
+\family sans
+H-Factor
+\family default
+ and the optional inset
+\family sans
+V-Factor
+\family default
+ (inserted via the menu
+\family sans
+Insert\SpecialChar menuseparator
+V-Factor)
+\family default
+.
+ Input there there horizontal and vertical scale factor, respectively.
+ If no
+\family sans
+V-Factor
+\family default
+ inset is used, the horizontal factor will also be used as the vertical
+ one.
+\end_layout
+
+\begin_layout Standard
+To get for example the double text size, compared to the document text size,
+ insert
+\series bold
+2
+\series default
+ into the
+\family sans
+H-Factor
+\family default
+ inset.
+ An example:
+\begin_inset Flex Scalebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+2
+\end_layout
+
+\end_inset
+
+Hello
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+2
+\series default
+ as
+\family sans
+H-Factor
+\family default
+ and
+\series bold
+1
+\series default
+ as
+\family sans
+V-Factor
+\family default
+ distorts the
+\begin_inset Flex Scalebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+2
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+1
+\end_layout
+
+\end_inset
+
+Hello
+\end_layout
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+If the scaling factor is negative, the box content will be mirrored.
+ Therefore
+\series bold
+-1
+\series default
+ as
+\family sans
+H-Factor
+\family default
+ and
+\series bold
+1
+\series default
+ as
+\family sans
+V-Factor
+\family default
+ can be used to create mirror writing:
+\begin_inset Flex Scalebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+-1
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+1
+\end_layout
+
+\end_inset
+
+Hello
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+-1
+\series default
+ as
+\family sans
+H-Factor
+\family default
+ and
+\series bold
+1
+\series default
+ as
+\family sans
+V-Factor
+\family default
+ reflects the
+\begin_inset Flex Scalebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+1
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+-1
+\end_layout
+
+\end_inset
+
+Hello
+\end_layout
+
+\end_inset
+
+ at the base line.
+\end_layout
+
+\begin_layout Standard
+The
+\family sans
+Reflectbox
+\family default
+ (menu
+\family sans
+Insert\SpecialChar menuseparator
+Custom Insets\SpecialChar menuseparator
+Reflectbox
+\family default
+) is equivalent to
+\series bold
+-1
+\series default
+ as
+\family sans
+H-Factor
+\family default
+ and
+\series bold
+1
+\series default
+ as
+\family sans
+V-Factor
+\family default
+for a
+\family sans
+Scalebox
+\family default
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ If the
+\family sans
+H-Factor
+\family default
+ inset is empty or contains other characters than numbers you will get LaTeX
+ errors when viewing/exporting the document.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+The
+\family sans
+Resizebox
+\family default
+ (menu
+\family sans
+Insert\SpecialChar menuseparator
+Custom Insets\SpecialChar menuseparator
+Resizebox
+\family default
+) is used to scale the content to a defined width and height.
+ The
+\family sans
+Resizebox
+\family default
+ inset has the mandatory inset
+\family sans
+Width
+\family default
+ and the optional inset
+\family sans
+Height
+\family default
+ (inserted via the menu
+\family sans
+Insert\SpecialChar menuseparator
+Height)
+\family default
+.
+ Input there there width and height, respectively, as value with a unit.
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Units"
+
+\end_inset
+
+ lists the possible units.
+ If there is an exclamation mark
+\series bold
+!
+\series default
+ in of of the two insets, the size is set so that the aspect ratio of the
+ box content is kept.
+ If no
+\family sans
+Height
+\family default
+ inset is used an exclamation mark will internally be used for the height.
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+2cm
+\series default
+ as
+\family sans
+Width
+\family default
+ and
+\series bold
+1cm
+\series default
+ as
+\family sans
+Height
+\family default
+ produces:
+\begin_inset Flex Resizebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+2cm
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+1cm
+\end_layout
+
+\end_inset
+
+Hello
+\end_layout
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
+2cm
+\series default
+ as
+\family sans
+Width
+\family default
+ and
+\series bold
+!
+\series default
+ as
+\family sans
+Height
+\family default
+ (or no
+\family sans
+Height
+\family default
+) produces:
+\begin_inset Flex Resizebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+2cm
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+!
+\end_layout
+
+\end_inset
+
+Hello
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ If the
+\family sans
+Width
+\family default
+ inset is empty or contains an invalid unit you will get LaTeX errors when
+ viewing/exporting the document.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The boxes can be combined in any order.
+ As example a
+\family sans
+Reflectbox
+\family default
+ inside a
+\family sans
+Resizebox
+\family default
+ which is in turn inside a
+\family sans
+Rotatebox
+\family default
+:
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+\begin_inset Flex Rotatebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+origin=c
+\end_layout
+
+\end_inset
+
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+-45
+\end_layout
+
+\end_inset
+
+
+\begin_inset Flex Resizebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+2cm
+\end_layout
+
+\end_inset
+
+
+\begin_inset Flex Reflectbox
+status open
+
+\begin_layout Plain Layout
+Hello
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+Images, tables, and inline formulas are allowed as box content:
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+\begin_inset Flex Resizebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+2cm
+\end_layout
+
+\end_inset
+
+
+\begin_inset Flex Reflectbox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Graphics
+ filename clipart/platypus.eps
+ lyxscale 50
+ width 25col%
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\begin_inset Flex Resizebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+2cm
+\end_layout
+
+\end_inset
+
+
+\begin_inset Flex Reflectbox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+q
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+w
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+e
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+r
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\begin_inset Flex Resizebox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Argument 1
+status open
+
+\begin_layout Plain Layout
+3cm
+\end_layout
+
+\end_inset
+
+
+\begin_inset Flex Reflectbox
+status open
+
+\begin_layout Plain Layout
+\begin_inset Formula $\int A\,\mathrm{d}x=B$
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Figures ! scaled
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Table Customization ! Scaling
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+When the global formula style
+\series bold
+fleqn
+\series default
+ is used in the document
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+When
+\begin_inset Quotes eld
+\end_inset
+
+fleqn
+\begin_inset Quotes erd
+\end_inset
+
+ is added to the document class options.
+\end_layout
+
+\end_inset
+
+, display style formulas can also be scaled.
+\end_layout
+
+\begin_layout Chapter
+Objects Surrounded by Text
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Surrounded by text
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Section
+Wrap Floats
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Wrap-Floats"
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Floats ! Wrap Floats
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Surrounded by text ! Wrap Floats
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset Wrap figure
+lines 0
+placement l
+overhang 1cm
+width "40col%"
+status open
+
+\begin_layout Plain Layout
+\begin_inset Graphics
+ filename clipart/mobius.eps
+ width 40col%
+ scaleBeforeRotation
+ rotateOrigin center
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Plain Layout
+\begin_inset Caption Standard
+
+\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "fig:This-is-a"
+
+\end_inset
+
+This is a figure wrap float.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+ This float type is used if you want to wrap text around a figure or table
+ so that it only occupies some fraction of the column width.
+ It can be inserted using the menu
+\family sans
+Insert\SpecialChar menuseparator
+Floats\SpecialChar menuseparator
+Figure
+\begin_inset space ~
+\end_inset
+
+Wrap
+\begin_inset space ~
+\end_inset
+
+Float
+\family default
+ or
+\family sans
+Table
+\begin_inset space ~
+\end_inset
+
+Wrap
+\begin_inset space ~
+\end_inset
+
+Float
+\family default
+ if the \SpecialChar LaTeX
+-package
+\series bold
+wrapfig
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! wrapfig
+\end_layout
+
+\end_inset
+
+ is installed.
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+Installing a \SpecialChar LaTeX
+-package is explained it in the
+\emph on
+\SpecialChar LaTeX
+
+\begin_inset space ~
+\end_inset
+
+Configuration
+\emph default
+ manual.
+\end_layout
+
+\end_inset
+
+ The settings of the float can be modified by right-clicking on the float
+ box.
+ The mandatory settings are the float
+\family sans
+Placement
+\family default
+ and its
+\family sans
+Width
+\family default
+.
+ Optional are the
+\family sans
+Overhang
+\family default
+ that specifies how much the float is set into the paragraph
+\begin_inset space \thinspace{}
+\end_inset
+
+/
+\begin_inset space \thinspace{}
+\end_inset
+
+page margin, and the
+\family sans
+Line
+\begin_inset space ~
+\end_inset
+
+span
+\family default
+ that specifies how many text lines the float will approximately need.
+ The line span is often hard to approximate; so it is better only to use
+ it when you encounter float placement problems.
+ You can furthermore decide if \SpecialChar LaTeX
+ is allowed to let the float float within
+ the paragraph or to surrounding paragraphs.
+ Figure
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "fig:This-is-a"
+
+\end_inset
+
+ is an example text wrap float with a width of 40
+\begin_inset space \thinspace{}
+\end_inset
+
+col%, 1
+\begin_inset space \thinspace{}
+\end_inset
+
+cm overhang, set to the left.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+\series default
+ Text
+\begin_inset space ~
+\end_inset
+
+wrap float floats are fragile! E.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+having a figure too close to the bottom of the page can mess things up in
+ such a way that the float does not appear in the output or that it is placed
+ over some other text.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+In general, the following applies for wrap floats:
+\end_layout
+
+\begin_layout Itemize
+They should not be placed in paragraphs that run over a page break.
+ That means that wrap floats are better inserted in their exact place when
+ the document is almost finished and you are able to estimate where page
+ breaks will appear.
+\end_layout
+
+\begin_layout Itemize
+They should either be placed in their own paragraph before the paragraph
+ where they should wrap into or within a paragraph.
+\end_layout
+
+\begin_layout Itemize
+In consecutive paragraphs they may cause troubles, so ensure that there
+ is a text paragraph between them as separator.
+\end_layout
+
+\begin_layout Itemize
+They are not allowed in section headings or tables.
+\end_layout
+
+\begin_layout Itemize
+Their numbering and referencing works as described in chap.
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "chap:Floats"
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Section
+Surrounded Fixed Objects
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Surrounded by text ! Fixed objects
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The wrap floats described in sec.
+\begin_inset space \thinspace{}
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Wrap-Floats"
+
+\end_inset
+
+ have these positions in the paragraph:
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+ or
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To get an object exactly at the position where it is inserted, for example
+ to get one of these positions:
+\begin_inset VSpace defskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="2">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset Info
+type "icon"
+arg "dialog-show-new-inset graphics"
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" bottomline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+text
+\end_layout
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\noindent
+you can use the \SpecialChar LaTeX
+-package
+\series bold
+picinpar
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! picinpar
+\end_layout
+
+\end_inset
+
+.
+ Here is an example:
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+ifpicinpar
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following section will only be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+picinpar
+\series default
+ is installed.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+begin{window}[2,c,{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Graphics
+ filename clipart/mobius.eps
+ lyxscale 60
+ width 40col%
+ scaleBeforeRotation
+ rotateOrigin center
+
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+},]
+\end_layout
+
+\begin_layout Plain Layout
+
+{}
+\end_layout
+
+\end_inset
+
+
+\size small
+It was in the spring of the year 1894 that all London was interested, and
+ the fashionable world dismayed, by the murder of the Honourable Ronald
+ Adair under most unusual and inexplicable circumstances.
+ The public has already learned those particulars of the crime which
+\size default
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+footnotemark{}
+\end_layout
+
+\end_inset
+
+
+\size small
+ came out in the police investigation, but a good deal was suppressed upon
+ that occasion, since the case for the prosecution was so overwhelmingly
+ strong that it was not necessary to bring forward all the facts.
+ Only now, at the end of nearly ten years, am I allowed to supply those
+ missing links which make up the whole of that remarkable chain.
+\size default
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+end{window}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+footnotetext{
+\end_layout
+
+\end_inset
+
+Footnote of the paragraph with the fixed object.
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-\align center
-This box is middle-aligned.
+
+}
\end_layout
\end_inset
- This is an example text line.
+
\end_layout
-\begin_layout Description
-Bottom This is an example text line.
-
-\begin_inset Box Boxed
-position "b"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "12col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
+\begin_layout Standard
+Surrounded fixed objects are used to let text float around them, at which
+ the object's position in the paragraph can be determined by the number
+ of lines above it.
+ In contrary to floats is it not possible to have a numbered caption.
+\end_layout
-\begin_layout Plain Layout
-\align center
-This box is bottom-aligned.
+\begin_layout Standard
+A fixed object is inserted by adding the command
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+begin{window}[2,c,{
\end_layout
+\begin_layout Standard
+as \SpecialChar TeX
+ Code at the beginning of the paragraph.
+ The first parameter in the bracket, here '2', defines the number of lines
+ above the object, the second, here 'c', the position of the object.
+ The positions 'l', 'c' and 'r' (for left, center, right) are possible.
+ Behind the command you insert the object.
+ In this example an image with a width of 40
+\begin_inset space \thinspace{}
\end_inset
- This is an example text line.
+% of the text column width was inserted.
+ The object can also be a table, a box or an equation.
+ Behind the object the command
\end_layout
\begin_layout Standard
-\begin_inset Note Greyedout
-status open
-\begin_layout Plain Layout
+\series bold
+},description text]
+\begin_inset Newline newline
+\end_inset
+
+{}
+\end_layout
+
+\begin_layout Standard
+is inserted.
+ Note that the
+\begin_inset Quotes eld
+\end_inset
+
\series bold
-Note:
+{}
\series default
- The vertical box alignment can be lost in the output when you have two
- boxes in a line and one has e.
+
+\begin_inset Quotes erd
+\end_inset
+
+ is in the second line.
+ The description text is optional.
+ The text surrounding the object must be in the same paragraph as the object,
+ so it must begin directly after the
+\series bold
+{}
+\series default
+.
+ At the end of the paragraph insert the command:
+\end_layout
+
+\begin_layout Standard
+
+\series bold
+
+\backslash
+end{window}
+\end_layout
+
+\begin_layout Standard
+Within a paragraph with a fixed object, you cannot insert footnotes in the
+ normal way.
+ You have to use instead the command
+\series bold
+
+\backslash
+footnotemark
+\series default
+ inside the paragraph and outside the command
+\series bold
+
+\backslash
+footnotetext
+\series default
+ as described in sec.
\begin_inset space \thinspace{}
\end_inset
-g.
-\begin_inset space \space{}
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Footnotes"
+
\end_inset
-a shadow and the other one not.
+.
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+else
+\end_layout
+
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following will be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+picinpar
+\series default
+ is not installed:
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The horizontal box alignment can be set via LyX's paragraph dialog when
- you set the box into its own paragraph.
+You need to install the \SpecialChar LaTeX
+-package
+\series bold
+picinpar
+\series default
+ to see the following part of this section in the output.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fi
+\end_layout
+
\end_inset
-When you have chosen an
+
+\end_layout
+
+\begin_layout Section
+Initials
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Initials
+\end_layout
+
+\end_inset
+
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Surrounded by text ! Initials
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+To use initials, you must have the \SpecialChar LaTeX
+-package
+\series bold
+lettrine
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! lettrine
+\end_layout
+
+\end_inset
+
+ installed and use the module
\family sans
-Inner
+Initials
+\family default
+ in your document (menu
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Modules
+\family default
+).
+ To insert an initial, use the style
+\family sans
+Initial
+\family default
+.
+ This style has a mandatory and two optional arguments.
+ The arguments are inserted via the
+\family sans
+Insert
+\family default
+ menu.
+ The mandatory argument
+\family sans
+Initial
+\family default
+ contains the letter(s) that is the initial, the argument
+\family sans
+Rest
\begin_inset space ~
\end_inset
-Box
+of
+\begin_inset space ~
+\end_inset
+
+Initial
\family default
-, the box content can be aligned vertically to:
+ contains the rest of the word or text of the initial letter(s).
+ The argument
+\family sans
+Options
+\family default
+ contains parameters to modify the initial.
+ For more information about the possible parameters see the documentation
+ of
+\series bold
+lettrine
+\series default
+,
+\begin_inset CommandInset citation
+LatexCommand cite
+key "lettrine"
+
+\end_inset
+
+.
+ The style itself contains the text that is surrounding the initial.
+ The usual style is hereby that the word whose first letter is the initial,
+ is printed with
+\shape smallcaps
+small caps
+\shape default
+.
\end_layout
-\begin_layout Description
-top This is an example text line.
-
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "t"
-use_parbox 0
-width "12col%"
-special "none"
-height "1.5in"
-height_special "totalheight"
+\begin_layout Standard
+Here are some examples:
+\end_layout
+
+\begin_layout Standard
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-\align center
-This box text is top-aligned.
+
+
+\backslash
+iflettrine
\end_layout
\end_inset
- This is an example text line.
+
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+The following section will only be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+lettrine
+\series default
+ is installed.
\end_layout
-\begin_layout Description
-middle This is an example text line.
-
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "12col%"
-special "none"
-height "1.5in"
-height_special "totalheight"
-status collapsed
+\end_inset
+
+
+\end_layout
+
+\begin_layout Enumerate
+No optional argument, the initial is the letter 'I' in the math font
+\begin_inset Formula $\mathfrak{Fraktur}$
+\end_inset
+
+:
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_deeper
+\begin_layout Initial
+\begin_inset Argument 2
+status open
\begin_layout Plain Layout
-\align center
-This box text is middle-aligned.
+\begin_inset Formula $\mathfrak{I}$
+\end_inset
+
+
\end_layout
\end_inset
- This is an example text line.
+
+\begin_inset Argument 3
+status open
+
+\begin_layout Plain Layout
+t
\end_layout
-\begin_layout Description
-bottom This is an example text line.
-
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "b"
-use_parbox 0
-width "12col%"
-special "none"
-height "1.5in"
-height_special "totalheight"
-status collapsed
+\end_inset
+
+ was in the spring of the year 1894 that all London was interested, and
+ the fashionable world dismayed, by the murder of the Honourable Ronald
+ Adair under most unusual and inexplicable circumstances.
+ The public has already learned those particulars of the crime which came
+ out in the police investigation, but a good deal was suppressed upon that
+ occasion, since the case for the prosecution was so overwhelmingly strong
+ that it was not necessary to bring forward all the facts.
+\begin_inset Newpage newpage
+\end_inset
+
+
+\end_layout
+
+\end_deeper
+\begin_layout Enumerate
+Only one line is surrounding the initial, which is formed by two letters
+ in standard font and no text is printed in small caps:
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_deeper
+\begin_layout Initial
+\begin_inset Argument 1
+status open
\begin_layout Plain Layout
-\align center
-This box text is bottom-aligned.
+lines=1
\end_layout
\end_inset
- This is an example text line.
+
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+It
\end_layout
-\begin_layout Description
-stretch This is an example text line.
-
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "s"
-use_parbox 0
-width "12col%"
-special "none"
-height "1.5in"
-height_special "totalheight"
+\end_inset
+
+ was in the spring of the year 1894 that all London was interested, and
+ the fashionable world dismayed, by the murder of the Honourable Ronald
+ Adair under most unusual and inexplicable circumstances.
+ The public has already learned those particulars of the crime which came
+ out in the police investigation, but a good deal was suppressed upon that
+ occasion, since the case for the prosecution was so overwhelmingly strong
+ that it was not necessary to bring forward all the facts.
+\end_layout
+
+\end_deeper
+\begin_layout Enumerate
+Magenta, hanging initial over 3
+\begin_inset space ~
+\end_inset
+
+lines in the math font
+\begin_inset Formula $\mathcal{CALLIGRAPHIC}$
+\end_inset
+
+, the text
+\begin_inset Quotes eld
+\end_inset
+
+t was in the spring
+\begin_inset Quotes erd
+\end_inset
+
+ is in
+\shape smallcaps
+small caps
+\shape default
+; to color the initial, you must insert this command before the initial:
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
+
+\backslash
+renewcommand{
+\backslash
+LettrineFontHook}{
+\backslash
+color{color}}
+\series default
+
+\begin_inset Newline newline
+\end_inset
+
+where the second
+\emph on
+color
+\emph default
+ can be
+\begin_inset Quotes eld
+\end_inset
+
+red
+\begin_inset Quotes erd
+\end_inset
+
+,
+\begin_inset Quotes eld
+\end_inset
+
+blue
+\begin_inset Quotes erd
+\end_inset
+
+,
+\begin_inset Quotes eld
+\end_inset
+
+green
+\begin_inset Quotes erd
+\end_inset
+
+,
+\begin_inset Quotes eld
+\end_inset
+
+yellow
+\begin_inset Quotes erd
+\end_inset
+
+,
+\begin_inset Quotes eld
+\end_inset
+
+cyan
+\begin_inset Quotes erd
+\end_inset
+
+,
+\begin_inset Quotes eld
+\end_inset
+
+magenta
+\begin_inset Quotes erd
+\end_inset
+
+,
+\begin_inset Quotes eld
+\end_inset
+
+black
+\begin_inset Quotes erd
+\end_inset
+
+ or
+\begin_inset Quotes eld
+\end_inset
+
+white
+\begin_inset Quotes erd
+\end_inset
+
+, and add this command to the document preamble:
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
+
+\backslash
+@ifundefined{textcolor}
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset space ~
+\end_inset
+
+{
+\backslash
+usepackage{color}}{}
+\series default
+
+\begin_inset Separator parbreak
+\end_inset
+
+
+\end_layout
+
+\begin_deeper
+\begin_layout Standard
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-\align center
-This box
+
+
+\backslash
+renewcommand{
+\backslash
+LettrineFontHook}{
+\backslash
+color{magenta}}
\end_layout
+\end_inset
+
+
+\begin_inset Note Note
+status collapsed
+
\begin_layout Plain Layout
-\align center
-text is
+makes the initial magenta
+\end_layout
+
+\end_inset
+
+
\end_layout
+\begin_layout Initial
+\begin_inset Argument 1
+status open
+
\begin_layout Plain Layout
-\align center
-stretched.
+lines=3, lhang=0.33, loversize=0.25
\end_layout
\end_inset
- This is an example text line.
-\end_layout
-\begin_layout Standard
-To stretch the box content, it must consist of more than one paragraph.
- In the example above every text line is in an own paragraph.
+\begin_inset Argument 2
+status open
+
+\begin_layout Plain Layout
+\begin_inset Formula $\mathcal{I}$
+\end_inset
+
+
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-To align the box content horizontally you can use LyX's paragraph dialog
- when you have chosen an
-\family sans
-Inner
-\begin_inset space ~
+
+\begin_inset Argument 3
+status open
+
+\begin_layout Plain Layout
+t was in the spring
+\end_layout
+
\end_inset
-Box
-\family default
-.
+ of the year 1894 that all London was interested, and the fashionable world
+ dismayed, by the murder of the Honourable Ronald Adair under most unusual
+ and inexplicable circumstances.
+ The public has already learned those particulars of the crime which came
+ out in the police investigation, but a good deal was suppressed upon that
+ occasion, since the case for the prosecution was so overwhelmingly strong
+ that it was not necessary to bring forward all the facts.
\end_layout
+\end_deeper
\begin_layout Standard
-\align center
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "s"
-use_parbox 0
-width "15col%"
-special "none"
-height "1.25in"
-height_special "totalheight"
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-\align left
-This box
-\end_layout
-\begin_layout Plain Layout
-\align center
-text is
+
+\backslash
+else
\end_layout
+\end_inset
+
+
+\begin_inset Note Note
+status open
+
\begin_layout Plain Layout
-\align right
-stretched.
+The following will be displayed when the \SpecialChar LaTeX
+-package
+\series bold
+lettrine
+\series default
+ is not installed:
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-If you have not set an
-\family sans
-Inner
-\begin_inset space ~
-\end_inset
-
-Box
-\family default
-, you can align the box content horizontally in the box dialog.
+You need to install the \SpecialChar LaTeX
+-package
+\series bold
+lettrine
+\series default
+ to see the following part of this section in the output.
\end_layout
\begin_layout Standard
-\align center
-\begin_inset Box Boxed
-position "c"
-hor_pos "s"
-has_inner_box 0
-inner_pos "s"
-use_parbox 0
-width "90col%"
-special "none"
-height "1.25in"
-height_special "totalheight"
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-\align left
-This box text is horizontally stretched.
-\end_layout
-
-\end_inset
+\backslash
+fi
\end_layout
-\begin_layout Subsection
-Decoration
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Decoration"
-
\end_inset
-\begin_inset Index
+\end_layout
+
+\begin_layout Chapter
+External Document Parts
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Boxes ! Decoration
+External Document Parts
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The type of the box can be specified in the box dialog in the drop-down
- list
+With the menu
\family sans
-Decoration
+Insert\SpecialChar menuseparator
+File
\family default
-.
- The following types are possible:
+ you can insert external material into your document.
+ This can be:
\end_layout
\begin_layout Description
-Simple
+LyX
\begin_inset space ~
\end_inset
-rectangular
+Document Another \SpecialChar LyX
+ document; its content is directly inserted to your document.
+\end_layout
+
+\begin_layout Description
+Plain
\begin_inset space ~
\end_inset
-frame This draws a rectangular frame around the box.
- The frame line thickness has the size of
-\series bold
-
-\backslash
-fboxrule
-\series default
-.
-
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "20col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
-
-\begin_layout Plain Layout
-\align center
-Rectangular box
+Text A text document; each line is inserted in your document as a separate
+ paragraph.
\end_layout
+\begin_layout Description
+Plain
+\begin_inset space ~
+\end_inset
+
+Text,
+\begin_inset space ~
\end_inset
+Join
+\begin_inset space ~
+\end_inset
+Lines A text document; text lines are inserted in your document continuously
+ but an empty text line creates a new paragraph.
\end_layout
\begin_layout Description
-Allow
+External
\begin_inset space ~
\end_inset
-page
+Material Files in various formats.
+\end_layout
+
+\begin_layout Description
+Child
\begin_inset space ~
\end_inset
-break When you use the decoration
-\family sans
-simple rectangular frame
-\family default
- and no inner box, you can allow page breaks within a box.
- Note that then, in contrary to other framed boxes, the frame always uses
- the whole column width, the box is set as its own paragraph, and
-\series bold
-
-\backslash
-fboxrule
-\series default
- and
-\series bold
-
-\backslash
-fboxsep
-\series default
- have no effect on this box type.
- The frame line thickness has the size of
-\series bold
+Document \SpecialChar LyX
+ or \SpecialChar LaTeX
+ documents.
+\end_layout
-\backslash
-FrameRule
-\series default
-.
-
-\begin_inset Box Framed
-position "t"
-hor_pos "c"
-has_inner_box 0
-inner_pos "t"
-use_parbox 0
-width "100col%"
-special "none"
-height "1in"
-height_special "totalheight"
+\begin_layout Section
+External Material
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-Allow page break box
+External Document Parts ! External Material
\end_layout
\end_inset
\end_layout
-\begin_layout Description
-Oval
+\begin_layout Standard
+The external material feature allows you to insert files into your document
+ without converting them to a format that can be read by the document output
+ format.
+ \SpecialChar LyX
+ takes care of the necessary conversions.
+ This is similar to images that can be inserted in various image formats
+ in \SpecialChar LyX
+ documents.
+ When you have enabled Instant Preview in \SpecialChar LyX
+'s preferences under
+\family sans
+Look
\begin_inset space ~
\end_inset
-box,
+and
\begin_inset space ~
\end_inset
-thin This draws an oval frame around the box.
- The frame line thickness has the size 0.4
-\begin_inset space \thinspace{}
-\end_inset
+feel\SpecialChar menuseparator
+Graphics
+\family default
+, the external material types Dia and Xfig are directly shown in \SpecialChar LyX
+.
+\end_layout
-pt.
-
-\begin_inset Box ovalbox
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "20col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
+\begin_layout Standard
+External material can be inserted via the
+\family sans
+External Material
+\family default
+ dialog that is accessible with the menu
+\family sans
+Insert\SpecialChar menuseparator
+File\SpecialChar menuseparator
+External
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-\align center
-Oval box, thin
+Material
+\family default
+.
+ Currently the following file types (
+\family sans
+Templates
+\family default
+) are allowed:
\end_layout
+\begin_layout Description
+ChessDiagram This template supports chess position diagrams made with the
+ program
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "XBoard"
+target "http://en.wikipedia.org/wiki/XBoard"
+
\end_inset
+\series default
+.
\end_layout
\begin_layout Description
-Oval
-\begin_inset space ~
+Date This inserts the date in the form
+\emph on
+Day-Month-Year
+\emph default
+.
+ This is a date inserted as external material:
+\begin_inset External
+ template Date
+ filename .
+
\end_inset
-box,
+
\begin_inset space ~
\end_inset
-thick This draws an oval frame around the box.
- The frame line thickness has the size 0.8
-\begin_inset space \thinspace{}
-\end_inset
-pt.
-
-\begin_inset Box Ovalbox
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "20col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
+\begin_inset Note Note
+status open
\begin_layout Plain Layout
-\align center
-Oval box, thick
+Remove the protected space when bug 4398 is fixed!
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Description
-Drop
-\begin_inset space ~
+\begin_inset Newline newline
\end_inset
-shadow This draws a rectangular frame with a shadow around the box.
- The frame line thickness has the size of
+The date is not shown within \SpecialChar LyX
+, only in the output.
+ There are two other methods of inserting a date: Via menu
+\family sans
+Insert\SpecialChar menuseparator
+Date
+\family default
+ and with the \SpecialChar LaTeX
+ command
\series bold
\backslash
-fboxrule
+today
\series default
-, the shadow has a width of 4
-\begin_inset space \thinspace{}
+ as \SpecialChar TeX
+ Code.
+ The different methods are compared in Table
+\begin_inset space ~
\end_inset
-pt.
-
-\begin_inset Box Shadowbox
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "20col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
-\begin_layout Plain Layout
-\align center
-Shadow box
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Comparison-of-the"
+
+\end_inset
+
+.
\end_layout
+\begin_layout Description
+Dia This template supports diagrams created with the program
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "Dia"
+target "http://en.wikipedia.org/wiki/Dia_(software)"
+
\end_inset
+\series default
+.
\end_layout
\begin_layout Description
-Shaded
-\begin_inset space ~
+GnumericSpreadsheet With this template you can insert spreadsheets
+\begin_inset space \thinspace{}
\end_inset
-background This draws a box with red background color.
- In contrary to colored boxes
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-see sec.
+/
\begin_inset space \thinspace{}
\end_inset
+tables in the format of
+\series bold
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Colored-Boxes"
+\begin_inset CommandInset href
+LatexCommand href
+name "Gnumeric"
+target "http://en.wikipedia.org/wiki/Gnumeric"
\end_inset
-\end_layout
+\series default
+,
+\begin_inset CommandInset href
+LatexCommand href
+name "OpenDocument"
+target "http://en.wikipedia.org/wiki/OpenDocument"
\end_inset
-, it always uses the whole column width and the box is set as its own paragraph.
-
-\begin_inset Box Shaded
-position "t"
-hor_pos "c"
-has_inner_box 0
-inner_pos "t"
-use_parbox 0
-width "50col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
-
-\begin_layout Plain Layout
-Shaded background box
-\end_layout
+,
+\begin_inset CommandInset href
+LatexCommand href
+name "Microsoft Office XML"
+target "http://en.wikipedia.org/wiki/Microsoft_Office_XML_formats"
\end_inset
+ and
+\begin_inset CommandInset href
+LatexCommand href
+name "Office Open XML"
+target "http://en.wikipedia.org/wiki/Office_Open_XML"
+
+\end_inset
+.
+ For this feature \SpecialChar LyX
+ must have found the program
+\family typewriter
+ssconvert
+\family default
+ during its configuration.
+ This program is part of Gnumeric, so that you must have Gnumeric installed,
+ also if you don't have tables in the Gnumeric format.
+ For examples and possible limitations have a look at \SpecialChar LyX
+'s example file
+\emph on
+spreadsheet.lyx
+\emph default
+.
\end_layout
\begin_layout Description
-Double
-\begin_inset space ~
+LilyPond This template is used for music notation typeset with the program
+\begin_inset Newline linebreak
\end_inset
-rectangular
-\begin_inset space ~
+
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "LilyPond"
+target "http://en.wikipedia.org/wiki/LilyPond"
+
\end_inset
-frame This draws a double-line rectangular frame around the box.
- The line thickness of the inner frame is 0.75
+
+\series default
+.
+ For \SpecialChar LyX
+'s extended support for LilyPond have a look at \SpecialChar LyX
+'s example file
+\emph on
+lilypond.lyx
+\emph default
+.
+\end_layout
+
+\begin_layout Description
+PDFPages With this template you can insert PDF documents to your document.
+ To specify the range of pages that should be included, use the option
+\series bold
+pages
+\series default
+ in the
+\family sans
+Option
+\family default
+ field in the
+\family sans
+LaTeX and LyX options
+\family default
+ tab.
+ The argument of this option is a comma separated list, containing page
+ numbers (insert as option
+\series bold
+pages={3,5,6,8}
+\series default
+), ranges of page numbers (
+\series bold
+pages={4-9}
+\series default
+) or any combination.
+ To insert empty pages use {}.
+ E.
\begin_inset space \thinspace{}
\end_inset
+g.
+\begin_inset space ~
+\end_inset
+
\series bold
+pages={3,{},8-11,15}
+\series default
+ will insert page 3, an empty page, and pages 8, 9, 10, 11 and 15.
+ Page ranges are specified in the syntax
+\emph on
+start
+\emph default
+-
+\emph on
+stop
+\emph default
+.
+ This selects all pages from
+\emph on
+start
+\emph default
+ to
+\emph on
+stop
+\emph default
+.
+ Omitting
+\emph on
+start
+\emph default
+ defaults to the first page; omitting
+\emph on
+stop
+\emph default
+ defaults to the last page of the document.
+ The last page can also be selected with the keyword
+\series bold
+last
+\series default
+.
+ (This is only permitted in a page range.) So
+\series bold
+pages=-
+\series default
+ will insert all pages of the document and
+\series bold
+pages=last-1
+\series default
+ will insert all pages in reverse order.
+ If the pages option is not specified, only the first page of the PDF is
+ inserted.
+\begin_inset Newline newline
+\end_inset
-\backslash
-fboxrule
+The option
+\series bold
+noautoscale
\series default
-, the thickness of the outer frame is 1.5
+ inserts the pages with their original size, if this option is not given,
+ the pages will be resized to fith the width of the page of your document.
+ In the tab
+\family sans
+Size and Rotation
+\family default
+ you can specify the width and height of the input pages and their rotation.
+ If another width than 100
\begin_inset space \thinspace{}
\end_inset
-
+Scale% is used, the option
\series bold
-
-\backslash
-fboxrule
+noautoscale
+\series default
+ will be overwritten.
+ For more info and possible options, have a look into the documentation
+ of the \SpecialChar LaTeX
+-package
+\series bold
+pdfpages
\series default
+
+\begin_inset CommandInset citation
+LatexCommand cite
+key "pdfpages"
+
+\end_inset
+
.
- The distance between the lines is 1.5
-\begin_inset space \thinspace{}
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! pdfpages
+\end_layout
+
\end_inset
+\begin_inset Newline newline
+\end_inset
+
+To use this template in a
+\family sans
+Beamer
+\family default
+ presentation you need to first insert an
+\family sans
+EndFrame
+\family default
+ environment and in a subsequent paragraph a \SpecialChar TeX
+ Code box containing the command
+
\series bold
\backslash
-fboxrule
+setbeamertemplate{background canvas}{}
\series default
+.
+ Then you can insert as many paragraphs containing the PDFPages template
+ as you wish.
+ Behind the included PDF pages you can resume the Beamer presentation by
+ beginning a new frame or by starting a new section.
+ To avoid stray blank pages prior to the PDF pages, make sure to use the
+
+\family sans
+Default
+\family default
+ alignment for the paragraph containing the template.
+\begin_inset Newline newline
+\end_inset
+
+Here is an included PDF which is rotated by -5°:
+\begin_inset External
+ template PDFPages
+ filename clipart/Abstract.pdf
+ extra LaTeX "noautoscale, pages=-"
+ rotateAngle -5
+ rotateOrigin bottomleft
-\begin_inset space \thinspace{}
\end_inset
-+
-\begin_inset space \thinspace{}
+
+\end_layout
+
+\begin_layout Description
+RasterImage This can be used for bitmap images.
+ The image can be treated in the
+\family sans
+External material
+\family default
+ dialog like the images that are usually included via the
+\family sans
+Graphics
+\family default
+ dialog as described in section
+\begin_inset space ~
\end_inset
-0.5
-\begin_inset space \thinspace{}
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Graphics-Dialog"
+
+\end_inset
+
+.
+ The difference to the normal image input is that only raster images are
+ allowed; that means that PDF and EPS-images are not supported.
+ Here is an inserted raster image:
+\begin_inset External
+ template RasterImage
+ filename clipart/ToolbarEnvBox.png
+
\end_inset
-pt.
-
-\begin_inset Box Doublebox
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "20col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
-\begin_layout Plain Layout
-\align center
-Double rectangular box
\end_layout
+\begin_layout Description
+XFig This template supports images created with the program
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "Xfig"
+target "http://en.wikipedia.org/wiki/Xfig"
+
\end_inset
+\series default
+.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-LyX's box label will reflect the different frame types.
- To be able to use all types, the LaTeX-package
-\series bold
-fancybox
-\series default
+\begin_inset Float table
+placement !h
+wide false
+sideways false
+status open
-\begin_inset Index
-status collapsed
+\begin_layout Plain Layout
+\begin_inset Caption Standard
\begin_layout Plain Layout
-LaTeX-packages ! fancybox
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Comparison-of-the"
+
+\end_inset
+
+Comparison of the date input methods.
\end_layout
\end_inset
- must be installed.
+
\end_layout
-\begin_layout Section
-Box Customization
-\begin_inset Index
-status collapsed
+\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="4">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Boxes ! Customization
+Document format
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\family sans
+External Material\SpecialChar menuseparator
+Date
\end_layout
-\begin_layout Standard
-The default value for the size
-\series bold
-
-\backslash
-fboxrule
-\series default
- is 0.4
-\begin_inset space \thinspace{}
-\end_inset
-
-pt.
- It can be changed with the following command in TeX-Code to e.
-\begin_inset space \thinspace{}
-\end_inset
-
-g.
-\begin_inset space \space{}
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-2
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
-pt:
+\family sans
+Insert\SpecialChar menuseparator
+Date
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+command
\series bold
\backslash
-setlength{
-\backslash
-fboxrule}{2pt}
+today
\end_layout
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+\SpecialChar LyX
-
-\backslash
-setlength{
-\backslash
-fboxrule}{2pt}
\end_layout
\end_inset
-
-
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "25col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\align center
-Rectangular box with
-\series bold
-
-\backslash
-fboxrule
-\series default
+as inset box
+\end_layout
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-=
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
+as date
+\end_layout
-2
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-pt
+\begin_layout Plain Layout
+as \SpecialChar TeX
+ Code inset box
\end_layout
\end_inset
-
-
-\begin_inset ERT
-status collapsed
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+\SpecialChar LaTeX
-
-\backslash
-setlength{
-\backslash
-fboxrule}{0.4pt}
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+as date
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
-
-The space between the frame and the box content is for all frame styles
- by default 3
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-pt.
- You can change it by setting the length
-\series bold
-
-\backslash
-fboxsep
-\series default
- to another value.
- For example the command
+\begin_layout Plain Layout
+as date
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-setlength{
-\backslash
-fboxsep}{10pt}
+\begin_layout Plain Layout
+as command
\end_layout
-\begin_layout Standard
-sets the value to 10
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-pt, like for the following box:
+\begin_layout Plain Layout
+DVI, PDF, PS
\end_layout
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-
-\backslash
-setlength{
-\backslash
-fboxsep}{10pt}
+as date
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+as date
+\end_layout
-\begin_inset Box Boxed
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "25col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\align center
-Rectangular box with
-\series bold
-
-\backslash
-fboxsep
-\series default
+as date
+\end_layout
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+</row>
+</lyxtabular>
-=
-\begin_inset space \thinspace{}
\end_inset
-10
-\begin_inset space \thinspace{}
-\end_inset
-pt
\end_layout
\end_inset
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-setlength{
-\backslash
-fboxsep}{3pt}
\end_layout
+\begin_layout Standard
+When you use the option
+\family sans
+Draft
+\family default
+ in the
+\family sans
+File
+\family default
+ tab of the
+\family sans
+External Material
+\family default
+ dialog, only the path to the inserted file is shown in the output.
+\begin_inset Newline newline
\end_inset
+External material is displayed in \SpecialChar LyX
+ either as a box like this:
+\begin_inset Graphics
+ filename clipart/ExternalMaterialQt4.png
+ scale 85
+ scaleBeforeRotation
+
+\end_inset
+ or as image, depending on the option
+\family sans
+Show in LyX
+\family default
+ in the
+\family sans
+LaTeX and LyX options
+\family default
+ tab of the dialog.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
+The
+\family sans
+\emph on
+Customization
+\family default
+\emph default
+ manual explains how you can define your own templates.
+\end_layout
+
+\begin_layout Section
+Child Documents
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Child-Documents"
+
\end_inset
-The diameter of the round corners of the oval boxes can be set with the
- command
-\series bold
-\backslash
-cornersize
-\series default
-.
- The command
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+External Document Parts ! Child Documents
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-cornersize*{1cm}
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+Files ! Include
\end_layout
-\begin_layout Standard
-sets the diameter to 1
-\begin_inset space \thinspace{}
\end_inset
-cm.
- The command
+
\end_layout
\begin_layout Standard
+Child documents are used if you have a long document consisting of several
+ larger parts or sections.
+ For maintenance it is often useful and sometimes even required to split
+ the document into several files that can be revised separately.
+ The different documents are then the so called
+\begin_inset Quotes eld
+\end_inset
-\series bold
+child documents
+\begin_inset Quotes erd
+\end_inset
-\backslash
-cornersize{num}
+, and a master document connects them to print the full document or parts
+ of it.
+ A child document inherits elements from its master, for example the \SpecialChar LaTeX
+ preamble,
+ the bibliography, and labels for cross-references.
\end_layout
\begin_layout Standard
-sets the diameter to
+To be able to work on child documents without the need to open their master,
+ specify in the child document the master in the menu
\family sans
-num
-\begin_inset space \thinspace{}
-\end_inset
-
-×
-\begin_inset space \thinspace{}
+ Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Document
+\begin_inset space ~
\end_inset
-minimum(width and heigth of box)
+Class
\family default
.
- The default is
-\series bold
-
-\backslash
-cornersize{0.5}
-\series default
-.
+ This master document will then be used in the background by \SpecialChar LyX
+ when you edit
+ the child document.
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
+Included documents are displayed in \SpecialChar LyX
+ as a box like this:
+\begin_inset Graphics
+ filename clipart/ChildDocumentQt4.png
+ scale 85
+ scaleBeforeRotation
-\begin_layout Plain Layout
+\end_inset
+ To include child documents in a master document use the menu
+\family sans
+Insert\SpecialChar menuseparator
+File\SpecialChar menuseparator
+Child
+\begin_inset space ~
+\end_inset
-\backslash
-cornersize*{1.5cm}
+Documents
+\family default
+.
+ A dialog pops up where you can choose between four include methods:
\end_layout
+\begin_layout Description
+Include You can include \SpecialChar LyX
+ and \SpecialChar LaTeX
+ documents.
+ When you press the
+\family sans
+Edit
+\family default
+ button in the
+\family sans
+Child Document
+\family default
+ dialog, the included document will be opened in \SpecialChar LyX
+ in a new file tab so that
+ you can modify it.
+\begin_inset Newline newline
\end_inset
-\begin_inset Box Ovalbox
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "25col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
-
-\begin_layout Plain Layout
-\align center
-Oval box with
-\series bold
-
-\backslash
-cornersize
-\series default
+\end_layout
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Standard
+Here is a child document inserted using
+\family sans
+Include
+\family default
+:
+\begin_inset CommandInset include
+LatexCommand include
+filename "DummyDocument1.lyx"
-=
-\begin_inset space \thinspace{}
\end_inset
-1.5
-\begin_inset space \thinspace{}
-\end_inset
-cm
\end_layout
+\begin_layout Standard
+The section numbering includes the sections of the included files in the
+ order they are inserted in the master document.
+ The included example document has for example a subsection that is numbered
+ as a subsection of this section.
+ Labels of included documents can be referenced: Subsection
+\begin_inset space ~
\end_inset
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-cornersize{0.5}
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:External-Subsection-1"
\end_inset
+.
+\end_layout
+\begin_layout Standard
+The preamble of the child document is ignored; only the preamble of the
+ master document is used.
+ Branches in child documents will be ignored by the master document when
+ the master document does not have a branch with the same name.
+ Included documents are inserted starting on a new page and ending with
+ a page break.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
+\begin_inset Note Greyedout
+status open
-The size of the shadow can be adjusted by changing the length
-\series bold
+\begin_layout Plain Layout
-\backslash
-shadowsize
+\series bold
+Note:
\series default
-.
- It it set to 2
-\begin_inset space \thinspace{}
-\end_inset
-
-pt for the following box by this command:
+ If you have included a \SpecialChar LyX
+ or \SpecialChar LaTeX
+ file, you are warned when you export/view the
+ document in case the child document uses another document class than the
+ master document as this will lead to unexpected outputs.
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-setlength{
-\backslash
-shadowsize}{2pt}
\end_layout
-\begin_layout Standard
-\begin_inset ERT
-status collapsed
+\begin_layout Description
+Input This method is very similar to the Include method.
+ The differences are:
+\begin_inset Separator parbreak
+\end_inset
-\begin_layout Plain Layout
+\end_layout
-\backslash
-setlength{
-\backslash
-shadowsize}{2pt}
+\begin_deeper
+\begin_layout Itemize
+Input files don't start with a new page and don't end with a page break.
\end_layout
+\begin_layout Itemize
+Input files can be previewed in \SpecialChar LyX
+ when
+\family sans
+Instant
+\begin_inset space ~
\end_inset
+Preview
+\family default
+ is enabled in \SpecialChar LyX
+'s preferences under
+\family sans
+Look
+\begin_inset space ~
+\end_inset
-\begin_inset Box Shadowbox
-position "c"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "25col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
+and
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-\align center
-Shadow box with
-\series bold
+feel\SpecialChar menuseparator
+Graphics
+\family default
+.
+\end_layout
-\backslash
-shadowsize
-\series default
+\begin_layout Itemize
+You cannot exclude Input files via the menu
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Child Documents
+\family default
+.
+\end_layout
-\begin_inset space \thinspace{}
-\end_inset
+\end_deeper
+\begin_layout Standard
+Here is a child document inserted using
+\family sans
+Input
+\family default
+:
+\begin_inset CommandInset include
+LatexCommand input
+filename "DummyDocument2.lyx"
-=
-\begin_inset space \thinspace{}
\end_inset
-2
-\begin_inset space \thinspace{}
-\end_inset
-pt
\end_layout
+\begin_layout Description
+Verbatim With this method any text file can be included.
+ The file is shown in the output with its source code; no command used in
+ the text is invoked.
+ You can use the option
+\family sans
+Mark spaces in output
+\family default
+ that displays the character
+\begin_inset Quotes eld
\end_inset
\backslash
-setlength{
-\backslash
-shadowsize}{4pt}
+textvisiblespace
\end_layout
\end_inset
-\end_layout
-
-\begin_layout Standard
-\begin_inset VSpace bigskip
+\begin_inset Quotes erd
\end_inset
+ for every space character in the source code.
+ The difference from the method via the menu
+\family sans
+Insert\SpecialChar menuseparator
+File\SpecialChar menuseparator
+Plain
+\begin_inset space ~
+\end_inset
+Text
+\family default
+ is that the document content is not shown in \SpecialChar LyX
+.
\end_layout
\begin_layout Standard
-The default value for the size
-\series bold
+Here is a child document inserted as Verbatim:
+\begin_inset CommandInset include
+LatexCommand verbatiminput
+filename "DummyTextDocument.txt"
-\backslash
-FrameRule
-\series default
- is 0.4
-\begin_inset space \thinspace{}
\end_inset
-pt.
- The default space between the note content and the frame is 9
-\begin_inset space \thinspace{}
-\end_inset
-pt and can be changed with the value of
-\series bold
+\begin_inset VSpace bigskip
+\end_inset
-\backslash
-FrameSep
-\series default
-.
- For example the frame appearance of the following
+ Here is a child document inserted as Verbatim using the
\family sans
-box
+Mark spaces in output
\family default
- is set with the TeX-Code commands
-\end_layout
-
-\begin_layout Standard
-
-\series bold
+ option:
+\begin_inset CommandInset include
+LatexCommand verbatiminput*
+filename "DummyTextDocument.txt"
-\backslash
-setlength{
-\backslash
-FrameRule}{5pt}
-\begin_inset Newline newline
\end_inset
-\backslash
-setlength{
-\backslash
-FrameSep}{0.5cm}
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-setlength{
-\backslash
-FrameRule}{5pt}
-\end_layout
-
-\begin_layout Plain Layout
+\begin_inset VSpace bigskip
+\end_inset
-\backslash
-setlength{
-\backslash
-FrameSep}{0.5cm}
\end_layout
-\end_inset
-
-
-\begin_inset Box Framed
-position "t"
-hor_pos "c"
-has_inner_box 0
-inner_pos "t"
-use_parbox 0
-width "100col%"
-special "none"
-height "1in"
-height_special "totalheight"
+\begin_layout Standard
+\begin_inset Note Greyedout
status open
\begin_layout Plain Layout
-This is text in an
+
+\series bold
+Note:
+\series default
+ As you can see in the examples above, the text of the documents included
+ as
\family sans
-allow page break
+verbatim
\family default
- box.
+ is not broken at the end of the document lines.
\end_layout
\end_inset
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+\end_layout
+\begin_layout Description
+Listings This type is described in chapter
+\begin_inset space ~
+\end_inset
-\backslash
-setlength{
-\backslash
-FrameRule}{0.4pt}
-\end_layout
-\begin_layout Plain Layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "cha:Program-Code-Listings"
+\end_inset
-\backslash
-setlength{
-\backslash
-FrameSep}{9pt}
+.
\end_layout
-\end_inset
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
+\begin_layout Plain Layout
+\series bold
+Note:
+\series default
+ Including the same document twice in a document using different methods
+ could cause \SpecialChar LaTeX
+-problems.
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
\end_layout
\begin_layout Standard
-For
+If you want to view/export only selected children of your master document,
+ either because you want to save compiling time or because you want to distribut
+e single chapters of the book you are just writing, you can exclude children
+ from the output.
+ This is done via the menu
\family sans
-shaded background
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Child Documents
\family default
- boxes the default space between the box content and the box border is 3
-\begin_inset space \thinspace{}
+.
+ You can exclude\SpecialChar breakableslash
+include children by double-clicking on the
+\family sans
+include to output
+\family default
+ column of the respective child document in the list (note that this only
+ works for documents embedded via
+\begin_inset Quotes eld
\end_inset
-pt and can be changed with the value of
-\series bold
+Include
+\begin_inset Quotes erd
+\end_inset
-\backslash
-fboxsep
-\series default
-.
- The default background color red can either be changed locally with the
- command
-\series bold
+, not with
+\begin_inset Quotes eld
+\end_inset
-\backslash
-definecolor{shadebox}
-\series default
- or globally with the menu
-\family sans
-Tools\SpecialChar \menuseparator
-Preferences\SpecialChar \menuseparator
-Colors\SpecialChar \menuseparator
-shaded
-\begin_inset space ~
+Input
+\begin_inset Quotes erd
\end_inset
-box
+).
+ If the option
+\family sans
+Maintain counters and references
\family default
-.
- The scheme of the
-\series bold
-
-\backslash
-definecolor
-\series default
- command is explained in section
+ is enabled, \SpecialChar LyX
+ will assure that all page numbers, references etc.
\begin_inset space ~
\end_inset
+are correct as if the whole document was processed.
+ This is useful if you want the selected sub-documents to look exactly as
+ in the context of the whole document.
+ However, \SpecialChar LyX
+ needs to process the whole document in the background for this
+ feature.
+ So if you want to save compile time and if counters and references do not
+ need to be correct, disable this checkbox.
+\end_layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Colored-Tables"
-
-\end_inset
-
-.
+\begin_layout Standard
+Alternatively, you can put each included file into a branch.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-Note that
-\series bold
-
-\backslash
-definecolor
-\series default
- requires the LaTeX-package
-\series bold
-color
-\series default
- in the preamble, see section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Colored-Boxes"
-
-\end_inset
-
+Branches are described in section
+\emph on
+Branches
+\emph default
+ of the \SpecialChar LyX
+
+\emph on
+Userguide
+\emph default
.
\end_layout
\end_inset
- For example the appearance of the following shaded background box is set
- with the TeX-Code commands
+ By enabling\SpecialChar breakableslash
+disabling branches you can decide which included files will
+ appear in the output.
+ This has the advantage that it also works with Input'ed sub-documents.
+ However, counters and references will not be maintained with this approach.
\end_layout
-\begin_layout Standard
-
-\series bold
-
-\backslash
-setlength{
-\backslash
-fboxsep}{0.5cm}
-\series default
+\begin_layout Chapter
+Program Code Listings
+\begin_inset CommandInset label
+LatexCommand label
+name "cha:Program-Code-Listings"
-\begin_inset Newline newline
\end_inset
-\series bold
-
-\backslash
-definecolor{shadecolor}{cmyk}{0.5,0,1,0.5}
-\end_layout
-
-\begin_layout Standard
-\begin_inset ERT
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-
-\backslash
-setlength{
-\backslash
-fboxsep}{0.5cm}
-\end_layout
-
-\begin_layout Plain Layout
-
-
-\backslash
-definecolor{shadecolor}{cmyk}{0.5,0,1,0.5}
+Listings
\end_layout
\end_inset
-\begin_inset Box Shaded
-position "t"
-hor_pos "c"
-has_inner_box 0
-inner_pos "t"
-use_parbox 0
-width "100col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
+\begin_inset Index idx
+status collapsed
\begin_layout Plain Layout
-
-\color yellow
-This is yellow text in a
-\color none
-
-\family sans
-\color yellow
-shaded background
-\family default
-\color none
-
-\color yellow
-box with dark green background.
+Program Code
\end_layout
\end_inset
-\begin_inset ERT
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
+Floats ! Listings
+\end_layout
+
+\end_inset
-\backslash
-setlength{
-\backslash
-fboxsep}{3pt}
\end_layout
-\begin_layout Plain Layout
+\begin_layout Standard
+To include and typeset program code you can use the
+\family sans
+Listings
+\family default
+ inset that can be inserted via the menu
+\family sans
+Insert\SpecialChar menuseparator
+Program Listing
+\family default
+.
+ The \SpecialChar LaTeX
+-package
+\series bold
+listings
+\series default
+\begin_inset Index idx
+status collapsed
-\backslash
-definecolor{shadecolor}{rgb}{1,0,0}
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! listings
\end_layout
\end_inset
+ provides a powerful and flexible way to insert program source code into
+ your document.
+\end_layout
+\begin_layout Standard
+Right-clicking on a listings inset opens the context menu containing where
+ you can set the listings format.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
+By default, a listing starts a new paragraph in the output.
+ The placement option
+\family sans
+Inline
+\begin_inset space ~
\end_inset
-Changed lengths and widths are valid for all boxes following the commands
- that change them.
+listing
+\family default
+ prints the listing inline like this:
+\begin_inset listings
+lstparams "language={C++}"
+inline true
+status open
+
+\begin_layout Plain Layout
+
+int a=5;
\end_layout
-\begin_layout Section
-Minipages
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Minipages"
+\end_inset
+
+\begin_inset Newline newline
\end_inset
+The option
+\family sans
+Float
+\family default
+ creates a listings float where you can specify the placement options
+\begin_inset Quotes eld
+\end_inset
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-Boxes ! Minipages
-\end_layout
+\family sans
+h
+\family default
+\begin_inset Quotes erd
\end_inset
+,
+\begin_inset Quotes eld
+\end_inset
-\end_layout
-\begin_layout Standard
-Minipages are treated by LaTeX as pages within pages and can therefore for
- example have their own footnotes.
-\end_layout
+\family sans
+t
+\family default
-\begin_layout Standard
-Minipages are useful when you write documents with different languages.
-\end_layout
+\begin_inset Quotes erd
+\end_inset
-\begin_layout Standard
-Below are two example minipages side by side.
- Their width is set to 45
-\begin_inset space \thinspace{}
+,
+\begin_inset Quotes eld
\end_inset
-col% and they are separated by a horizontal fill, that was inserted via
- the menu
+
\family sans
-Insert\SpecialChar \menuseparator
-Special
-\begin_inset space ~
+b
+\family default
+
+\begin_inset Quotes erd
\end_inset
-Formatting\SpecialChar \menuseparator
-Horizontal
-\begin_inset space ~
+, and
+\begin_inset Quotes eld
\end_inset
-Fill
+
+\family sans
+p
\family default
-.
-\begin_inset Newpage newpage
+
+\begin_inset Quotes erd
\end_inset
+ corresponding to the float placement options described in section
+\begin_inset space ~
+\end_inset
-\end_layout
-\begin_layout Standard
-\begin_inset Box Frameless
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "45col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Float-Placement"
-\begin_layout Plain Layout
+\end_inset
-\lang german
-Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text
-\begin_inset Foot
-status collapsed
+.
+ The placement options can be mixed and are inserted without any separation,
+ e.
+\begin_inset space \thinspace{}
+\end_inset
-\begin_layout Plain Layout
+g.
+\begin_inset space \space{}
+\end_inset
-\lang german
-Dies ist eine deutsche Fußnote.
-\end_layout
+\begin_inset Quotes eld
\end_inset
-.
- Dies ist ein deutscher Text.
- Dies ist ein deutscher Text.
-\end_layout
+\family sans
+htbp
+\family default
+
+\begin_inset Quotes erd
\end_inset
+.
+ The option
+\begin_inset Quotes eld
+\end_inset
-\begin_inset space \hfill{}
+h
+\begin_inset Quotes erd
\end_inset
+ has sometimes no effect, but you don't need to use the
+\family sans
+Float
+\family default
+ option in this case as also non-float listings can have captions and be
+ referenced.
+\end_layout
-\begin_inset Box Frameless
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "45col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
+\begin_layout Standard
+You can add captions to listings with the menu
+\family sans
+Insert\SpecialChar menuseparator
+Caption
+\family default
+.
+ Listings can be referenced like floats: Listing
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
- This is an English Text.
-\begin_inset Foot
-status collapsed
-\begin_layout Plain Layout
-This is an English footnote.
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "lst:Example-Listing"
\end_inset
- This is an English Text.
-
-\end_layout
-
+.
+ A list of listings which contains all listings with captions can be created
+ via the menu
+\family sans
+Insert\SpecialChar menuseparator
+List
+\begin_inset space ~
\end_inset
-
-\end_layout
-
-\begin_layout Standard
-\begin_inset VSpace bigskip
+/
+\begin_inset space ~
\end_inset
-Another application for minipages are footnotes within tables.
- Due to a LaTeX restriction footnotes within tables doesn't appear at the
- bottom of the current page.
- But when you put the table with the footnote to a minipage, the footnote
- will appear at its bottom, numbered with Latin letters.
- The footnote number is reset to 1 in every minipage but not outside the
- minipages.
+TOC\SpecialChar menuseparator
+List of Listings
+\family default
+.
+ The list entries are the listing caption and the listing number.
\end_layout
\begin_layout Standard
-The footnote of this table doesn't appear:
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="4">
-<features>
-<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="top" width="0pt">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_inset listings
+lstparams "language=Python"
+inline false
+status open
\begin_layout Plain Layout
-1
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_inset Caption Standard
\begin_layout Plain Layout
-2
-\end_layout
+\begin_inset CommandInset label
+LatexCommand label
+name "lst:Example-Listing"
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-3
-\begin_inset Foot
-status collapsed
-\begin_layout Plain Layout
-This is a footnote within a table.
+Example Listing float
\end_layout
\end_inset
-
+# Example listing float
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
\begin_layout Plain Layout
-4
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-a
+def func(param):
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
\begin_layout Plain Layout
-b
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+ 'this is a python function'
+\end_layout
\begin_layout Plain Layout
-c
+
+ pass
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-d
+
\end_layout
+\begin_layout Standard
+When you have set a programming language in the listings dialog, the keywords
+ of this language will be recognized and specially typeset in the output.
+ In the example listings the Python keyword
+\begin_inset Quotes eld
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-e
-\end_layout
+def
+\begin_inset Quotes erd
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-f
+ is recognized and printed bold in the output.
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset Note Greyedout
+status open
\begin_layout Plain Layout
-g
+
+\series bold
+Note:
+\series default
+ If you don't get bold keywords when using typewriter fonts, your
+\family typewriter
+typewriter
+\family default
+ font probably doesn't provide a bold shape.
+ In this case select a different one in the menu
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Fonts
+\family default
+.
+ (The fonts
+\emph on
+LuxiMono, BeraMono
+\emph default
+ and
+\emph on
+Courier
+\emph default
+ provide bold shapes.)
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-h
+
\end_layout
+\begin_layout Standard
+In section
+\family sans
+Line
+\begin_inset space ~
\end_inset
-</cell>
-</row>
-</lyxtabular>
+numbering
+\family default
+ of the listings dialog you can specify the line numbering style.
+ You can insert a number to specify which lines are numbered in the field
+
+\family sans
+Step
+\family default
+.
+ When you insert e.
+\begin_inset space \thinspace{}
\end_inset
+g.
+\begin_inset space \space{}
+\end_inset
-\end_layout
-\begin_layout Standard
-\align center
-\begin_inset Box Frameless
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "c"
-use_parbox 0
-width "30col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status open
+\begin_inset Quotes eld
+\end_inset
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="4">
-<features>
-<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="top" width="0pt">
-<column alignment="center" valignment="top" width="0pt">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+3
+\begin_inset Quotes erd
+\end_inset
-\begin_layout Plain Layout
-1
+, only every 3rd line will be numbered.
\end_layout
+\begin_layout Standard
+You can furthermore specify a range of lines; only these will then appear
+ in the output.
+ The option
+\family sans
+Extended character table
+\family default
+ should be used when you use national characters like the German umlauts
+ in the listing.
+\begin_inset Newline newline
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-2
-\end_layout
+Here is an example listing with left line numbering, step
+\begin_inset Quotes eld
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
3
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-This is a footnote within a table.
-\end_layout
+\begin_inset Quotes erd
+\end_inset
+, language
+\begin_inset Quotes eld
\end_inset
+Python
+\begin_inset Quotes erd
+\end_inset
-\end_layout
+, options
+\begin_inset Quotes eld
+\end_inset
+Extended character table
+\begin_inset Quotes erd
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-4
-\end_layout
+ and
+\begin_inset Quotes eld
+\end_inset
+Space
+\begin_inset space ~
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-a
-\end_layout
+as
+\begin_inset space ~
+\end_inset
+symbol
+\begin_inset Quotes erd
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-b
-\end_layout
+, range lines 3
+\begin_inset space \thinspace{}
+\end_inset
+-
+\begin_inset space \thinspace{}
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-c
+8:
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+\begin_inset listings
+lstparams "extendedchars=true,firstline=3,language=Python,lastline=8,numbers=left,showspaces=true,stepnumber=3"
+inline false
+status open
\begin_layout Plain Layout
-d
-\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
+def func(param):
+\end_layout
\begin_layout Plain Layout
-e
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
+ 'this is a python function'
+\end_layout
\begin_layout Plain Layout
-f
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
+ pass
+\end_layout
\begin_layout Plain Layout
-g
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+def func(param):
+\end_layout
\begin_layout Plain Layout
-h
+
+'This is a German word: Tschüß'
\end_layout
-\end_inset
-</cell>
-</row>
-</lyxtabular>
+\begin_layout Plain Layout
-\end_inset
+pass
+\end_layout
+\begin_layout Plain Layout
+def func(param):
\end_layout
-\end_inset
-
+\begin_layout Plain Layout
+'this is a python function'
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
-\end_inset
+\begin_layout Plain Layout
-The document-wide paragraph settings are ignored within minipages.
- That means that there will be no space between paragraphs in minipages
- although you set it to e.
-\begin_inset space \thinspace{}
-\end_inset
+pass
+\end_layout
-g.
-\begin_inset space \space{}
\end_inset
-\family sans
-MedSkip
-\family default
- in the document settings.
\end_layout
\begin_layout Standard
-Minipages can also be used to set a background color for text parts, see
- section
+When you have tabulators in your listing, you can specify the number of
+ characters that are spanned by a tabulator in the field
+\family sans
+Tabulator
\begin_inset space ~
\end_inset
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:Color-for-Paragraphs"
-
-\end_inset
-
+size
+\family default
.
\end_layout
\series bold
Note:
\series default
- You cannot have floats or margin notes inside minipages but minipages can
- be used inside tables, floats, and other boxes.
-\end_layout
-
-\end_inset
-
-
+ Due to a bug in the
+\series bold
+listings
+\series default
+ package the line numbering is shifted by a line by every previous listing.
+ That's the reason why the lines 2 and 5 are numbered in the above listing
+ and not the lines 3 and 6.
\end_layout
-\begin_layout Section
-Parboxes
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Parboxes"
-
\end_inset
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Boxes ! Parboxes
\end_layout
+\begin_layout Standard
+\begin_inset VSpace bigskip
\end_inset
\end_layout
\begin_layout Standard
-Parboxes are very similar to minipages with the difference that they cannot
- have footnotes.
- The main difference to minipages is that minipages are in contrary to parboxes
- no real boxes but LaTeX-environments.
-\end_layout
-
-\begin_layout Standard
-\align center
-\begin_inset Box Frameless
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "t"
-use_parbox 1
-width "33col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
-
-\begin_layout Plain Layout
-This a text within a parbox.
- This a text within a parbox.
-\end_layout
-
-\begin_layout Plain Layout
-This footnote won't appear:
+It is also possible to print lines from a file as listing.
+ To do this, use the menu
+\family sans
+Insert\SpecialChar menuseparator
+File\SpecialChar menuseparator
+Child Document
+\family default
+ and choose the type
+\family sans
+Listings
+\family default
+.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-This footnote is inside a parbox and will therefore not appear.
-\end_layout
-
+The other child document types are described in section
+\begin_inset space ~
\end_inset
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Child-Documents"
\end_inset
-
+.
\end_layout
-\begin_layout Section
-Boxes for Words and Characters
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Boxes ! for Characters
-\end_layout
+\end_inset
+ In the child document dialog you can specify the listing parameters in
+ a text box.
+ To show a list of all available parameters, type in a question mark
+\begin_inset Quotes eld
\end_inset
+?
+\begin_inset Quotes erd
+\end_inset
+ in the text box.
\end_layout
-\begin_layout Subsection
-Prevent Hyphenation
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Prevent-Hyphenation"
+\begin_layout Standard
+To reference child document listings, write a label text into the corresponding
+ field of the child document dialog.
+ The label can then be referenced using the menu
+\family sans
+Insert\SpecialChar menuseparator
+Cross-Reference
+\family default
+.
+\end_layout
+\begin_layout Standard
+Listing
+\begin_inset space ~
\end_inset
-\begin_inset Index
-status collapsed
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "lst:file-listing"
-\begin_layout Plain Layout
-Boxes ! to Prevent Hyphenation
-\end_layout
+\end_inset
+ is an example for a listing of a file; there the lines 10
+\begin_inset space \thinspace{}
\end_inset
+-
+\begin_inset space \thinspace{}
+\end_inset
+15 of this \SpecialChar LyX
+ file are listed.
\end_layout
\begin_layout Standard
-You can use a special kind of boxes to prevent words or text to be hyphenated.
-\begin_inset Newline newline
+\begin_inset CommandInset include
+LatexCommand lstinputlisting
+filename "EmbeddedObjects.lyx"
+lstparams "breaklines=true,caption={Lines 10 - 15 of this LyX file},extendedchars=true,firstline=10,label={lst:file-listing},language={[LaTeX]TeX},lastline=15"
+
\end_inset
-Here is an example text:
+
\end_layout
\begin_layout Standard
-This line is an example to show how you can prevent the hyphenation of
-\begin_inset Quotes eld
+\begin_inset VSpace bigskip
\end_inset
-veryverylongword
-\begin_inset Quotes erd
-\end_inset
-.
\end_layout
\begin_layout Standard
-To prevent the hyphenation of the word
-\begin_inset Quotes eld
+Inserting a formula into a listing can be done the following way:
+\end_layout
+
+\begin_layout Enumerate
+Open the listings dialog and add
+\begin_inset Newline newline
\end_inset
-veryverylongword
-\begin_inset Quotes erd
+
+\family sans
+mathescape=true
+\family default
+
+\begin_inset Newline newline
\end_inset
-, add the command
+to the field of the
+\family sans
+Advanced
+\family default
+ tab.
\end_layout
-\begin_layout Standard
+\begin_layout Enumerate
+Create a formula outside the listing
+\end_layout
-\series bold
+\begin_layout Enumerate
+Copy the content of the formula (not the formula inset) to the clipboard
+ (shortcut
+\begin_inset Info
+type "shortcut"
+arg "copy"
+\end_inset
-\backslash
-mbox{
+)
\end_layout
-\begin_layout Standard
-in TeX-Code before the word.
- Behind the word insert a closing brace
+\begin_layout Enumerate
+In the listing write
\begin_inset Quotes eld
\end_inset
-\series bold
-}
-\series default
+\family sans
+$$
+\family default
\begin_inset Quotes erd
\end_inset
- in TeX-Code.
-\end_layout
+ and copy from the clipboard between the dollar-signs (shortcut
+\begin_inset Info
+type "shortcut"
+arg "paste"
+\end_inset
-\begin_layout Standard
-This is the result:
+)
\end_layout
\begin_layout Standard
-This line is an example to show how you can prevent the hyphenation of
-\begin_inset ERT
-status collapsed
+\begin_inset listings
+lstparams "language=Python,mathescape=true"
+inline false
+status open
\begin_layout Plain Layout
+\begin_inset Caption Standard
-\backslash
-mbox{
+\begin_layout Plain Layout
+Example Listing float containing a formula
\end_layout
\end_inset
+# Example listing float
+\end_layout
-\begin_inset Quotes eld
-\end_inset
+\begin_layout Plain Layout
-veryverylongword
-\begin_inset Quotes erd
-\end_inset
+def func(param):
+\end_layout
-.
-\begin_inset ERT
-status collapsed
+\begin_layout Plain Layout
+
+ # $
+\backslash
+prod_{n=1}^{
+\backslash
+infty}
+\backslash
+,
+\backslash
+frac{1}{x^{2}}$
+\end_layout
\begin_layout Plain Layout
-}
+ pass
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-You can alternatively set the command
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+Global listings settings can be set in the
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Listings
+\family default
+ dialog.
+ To get there a list of available options, type in a question mark
\begin_inset Quotes eld
\end_inset
+?
+\begin_inset Quotes erd
+\end_inset
-\series bold
+.
+\end_layout
-\backslash
--
+\begin_layout Standard
+For more information about the
+\series bold
+listings
\series default
+ package, we refer to its documentation
+\begin_inset CommandInset citation
+LatexCommand cite
+key "listings"
-\begin_inset Quotes grd
\end_inset
- as TeX-Code directly before the word:
+.
\end_layout
\begin_layout Standard
-This line is an example to show how you can prevent the hyphenation of
-\begin_inset Quotes eld
+\begin_inset Newpage newpage
\end_inset
-\begin_inset ERT
-status collapsed
+\end_layout
-\begin_layout Plain Layout
+\begin_layout Chapter
+\start_of_appendix
+Units available in \SpecialChar LyX
+\begin_inset Index idx
+status collapsed
-\backslash
--
+\begin_layout Plain Layout
+Units
\end_layout
\end_inset
-veryverylongword
-\begin_inset Quotes erd
+
+\begin_inset CommandInset label
+LatexCommand label
+name "cha:Units-available-in"
+
\end_inset
-.
+
\end_layout
\begin_layout Standard
-Of course the word now protrudes over the side margin.
- To avoid this, add via the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Special
+To understand the units described in this documentation, Table
\begin_inset space ~
\end_inset
-Formatting\SpecialChar \menuseparator
-Line
-\begin_inset space ~
-\end_inset
-Break
-\family default
- (shortcut
-\begin_inset Info
-type "shortcut"
-arg "newline-insert newline"
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Units"
+
\end_inset
-) a line break before the word:
+ explains all units available in \SpecialChar LyX
+.
\end_layout
\begin_layout Standard
-This line is an example to show how you can prevent the hyphenation of
-\begin_inset Newline newline
-\end_inset
-
+\begin_inset Float table
+placement h
+wide false
+sideways false
+status open
-\begin_inset ERT
-status collapsed
+\begin_layout Plain Layout
+\begin_inset Caption Standard
\begin_layout Plain Layout
+\begin_inset CommandInset label
+LatexCommand label
+name "tab:Units"
+\end_inset
-\backslash
-mbox{
+Units
\end_layout
\end_inset
-\begin_inset Quotes eld
-\end_inset
+\end_layout
-veryverylongword
-\begin_inset Quotes erd
+\begin_layout Plain Layout
+\begin_inset VSpace medskip
\end_inset
-.
-\begin_inset ERT
-status collapsed
+
+\end_layout
\begin_layout Plain Layout
+\align center
+\begin_inset Tabular
+<lyxtabular version="3" rows="20" columns="3">
+<features tabularvalignment="middle">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<column alignment="center" valignment="top">
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-}
+\begin_layout Plain Layout
+unit
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+name/description
\end_layout
-\begin_layout Subsection
-Vertical Alignment
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Vertical-Alignment"
-
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+ command
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Boxes ! for Vertical Alignment
+mm
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+millimeter
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Boxes ! Raiseboxes
+-
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+cm
\end_layout
-\begin_layout Standard
-With the help of the command
-\series bold
-
-\backslash
-raisebox
-\series default
- you can align words, characters or other boxes vertically to the surrounding
- text.
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-raisebox
-\series default
- is used with the following scheme:
+\begin_layout Plain Layout
+centimeter
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-raisebox{lift}[height][depth]{box content}
+\begin_layout Plain Layout
+-
\end_layout
-\begin_layout Standard
-The lift can be a positive value to raise the box or a negative value to
- lower the box.
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+in
\end_layout
-\begin_layout Standard
-To align for example the word
-\begin_inset Quotes eld
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+inch
+\end_layout
-preventing
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+-
+\end_layout
- so that the bottom of the
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+pt
+\end_layout
-deepest
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
- character
-\begin_inset Quotes eld
+\begin_layout Plain Layout
+point (72.27
+\begin_inset space \thinspace{}
\end_inset
-p
-\begin_inset Quotes erd
+pt = 1
+\begin_inset space \thinspace{}
\end_inset
- is at the baseline, insert the command
+in)
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-\backslash
-raisebox{
-\backslash
-depth}{
+\begin_layout Plain Layout
+-
\end_layout
-\begin_layout Standard
-in TeX-Code before the word.
- Behind the word insert a closing brace
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+pc
+\end_layout
-\series bold
-}
-\series default
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\begin_inset Quotes erd
+\begin_layout Plain Layout
+pica (1
+\begin_inset space \thinspace{}
\end_inset
- in TeX-Code.
-\begin_inset Newline newline
+pc = 12
+\begin_inset space \thinspace{}
\end_inset
-This is the result:
+pt)
\end_layout
-\begin_layout Standard
-This is a text line with the word
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+-
+\end_layout
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-raisebox{
-\backslash
-depth}{
+\begin_layout Plain Layout
+sp
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
-\begin_inset Quotes eld
+\begin_layout Plain Layout
+scaled point (65536
+\begin_inset space \thinspace{}
\end_inset
-preventing
-\begin_inset Quotes erd
+sp = 1
+\begin_inset space \thinspace{}
\end_inset
+pt)
+\end_layout
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-}
+-
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
- as raised word.
+\begin_layout Plain Layout
+bp
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-When you raise or lower characters in a line, the line distance will be
- spread:
+\begin_layout Plain Layout
+big point (72
+\begin_inset space \thinspace{}
+\end_inset
+
+bp = 1
+\begin_inset space \thinspace{}
+\end_inset
+
+in)
\end_layout
-\begin_layout Standard
-This is a text line with the word
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+-
+\end_layout
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-raisebox{-
-\backslash
-depth}{
+\begin_layout Plain Layout
+dd
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+didot (1
+\begin_inset space \thinspace{}
+\end_inset
-\begin_inset Quotes eld
+dd
+\begin_inset Formula $\approx$
\end_inset
-preventing
-\begin_inset Quotes erd
+ 0.376
+\begin_inset space \thinspace{}
\end_inset
+mm)
+\end_layout
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-}
+-
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
- as lowered word.
-\begin_inset Newline newline
-\end_inset
+\begin_layout Plain Layout
+cc
+\end_layout
-This is a text line with the word
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+cicero (1
+\begin_inset space \thinspace{}
+\end_inset
+cc = 12
+\begin_inset space \thinspace{}
+\end_inset
-\backslash
-raisebox{0.5cm}{
+dd)
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+-
+\end_layout
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+Scale Graphics %
+\end_layout
-testing
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+% of original image width
+\end_layout
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-}
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
- as raised word.
-\end_layout
-
-\begin_layout Standard
-If you want to prevent this for a certain reason, set the box height to
- a zero value.
- For example use
+\begin_layout Plain Layout
+Text Width %
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-raisebox{-
-\backslash
-depth}[0pt]{
+\begin_layout Plain Layout
+% of text width
\end_layout
-\begin_layout Standard
-This is a text line with the word
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-\backslash
-raisebox{-
\backslash
-depth}[0pt]{
+textwidth
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+Column Width %
+\end_layout
-\begin_inset Quotes eld
-\end_inset
-
-preventing
-\begin_inset Quotes erd
\end_inset
-
-
-\begin_inset ERT
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
-}
+% of column width
\end_layout
\end_inset
-
- as lowered word.
-\begin_inset Newline newline
-\end_inset
-
-This is a text line with the word
-\begin_inset ERT
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
\backslash
-raisebox{0.5cm}[0pt]{
+columnwidth
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+Page Width %
+\end_layout
-\begin_inset Quotes eld
-\end_inset
-
-testing
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+% of paper width
+\end_layout
-\begin_inset ERT
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-}
+\backslash
+paperwidth
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
- as raised word.
+\begin_layout Plain Layout
+Line Width %
\end_layout
-\begin_layout Section
-Colored Boxes
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Colored-Boxes"
-
\end_inset
-
-
-\begin_inset Index
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Boxes ! Color
+% of line width
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\backslash
+linewidth
\end_layout
-\begin_layout Subsection
-Color for Text
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-Color ! for Text
+Text Height %
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
+% of text height
\end_layout
-\begin_layout Standard
-To color the background of text the text must be put into a so called
-\begin_inset Quotes eld
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-colorbox
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
-.
- This requires that the LaTeX-package
-\series bold
-color
-\series default
+\backslash
+textheight
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-LaTeX-packages ! color
+Page Height %
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
- is loaded in the document preamble with the command
+\begin_layout Plain Layout
+% of paper height
\end_layout
-\begin_layout Standard
-
-\series bold
-
-\backslash
-@ifundefined{textcolor}
-\begin_inset Newline newline
\end_inset
-
-
-\begin_inset ERT
-status collapsed
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-
\backslash
-hphantom{ }
+paperheight
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-{
-\backslash
-usepackage{color}}{}
+\begin_layout Plain Layout
+ex
\end_layout
-\begin_layout Standard
-The package
-\series bold
-color
-\series default
- will be loaded automatically by LyX when you color text
-\begin_inset Foot
-status collapsed
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-To avoid that it is loaded twice the command
-\series bold
-
-\backslash
-@ifundefined
-\series default
- is used.
+height of letter
+\emph on
+x
+\emph default
+ in current font
\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-.
+\begin_layout Plain Layout
+-
\end_layout
-\begin_layout Standard
-\begin_inset VSpace medskip
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-Colorboxes are created with the command
-\series bold
-
-\backslash
-colorbox
-\series default
-.
- This will be used with the following scheme:
+\begin_layout Plain Layout
+em
\end_layout
-\begin_layout Standard
-
-\series bold
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\backslash
-colorbox{color}{box content}
+\begin_layout Plain Layout
+width of letter
+\emph on
+M
+\emph default
+ in current font
\end_layout
-\begin_layout Standard
-The box content can also be a box and colorboxes can also be within other
- boxes.
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+-
\end_layout
-\begin_layout Standard
-The following colors are predefined:
-\begin_inset Newline newline
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+mu
+\end_layout
-\family sans
-black
-\family default
-,
-\family sans
-blue
-\family default
-,
-\family sans
-cyan
-\family default
-\series bold
-,
-\series default
-
-\family sans
-green
-\family default
-,
-\family sans
-magenta
-\family default
-,
-\family sans
-red
-\family default
-,
-\family sans
-white
-\family default
-, and
-\family sans
-yellow
-\family default
-.
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
-You can also define your own color as described in section
-\begin_inset space ~
+\begin_layout Plain Layout
+math unit (1
+\begin_inset space \thinspace{}
\end_inset
+mu = 1/18
+\begin_inset space \thinspace{}
+\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Colored-Tables"
+em)
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
-.
+\begin_layout Plain Layout
+-
\end_layout
-\begin_layout Standard
-To have e.
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+</row>
+</lyxtabular>
-g.
-\begin_inset space \space{}
\end_inset
-a red background for a word, insert the command
-\end_layout
-
-\begin_layout Standard
-
-\series bold
-\backslash
-colorbox{red}{
\end_layout
-\begin_layout Standard
-before the word in TeX-Code.
- Behind the word insert a closing brace
-\begin_inset Quotes eld
\end_inset
-\series bold
-}
-\series default
+\end_layout
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Chapter
+Output File Formats with Graphics
+\begin_inset CommandInset label
+LatexCommand label
+name "cha:Output-File-Formats"
- in TeX-Code.
-\begin_inset Newline newline
\end_inset
-This is the result:
+
\end_layout
-\begin_layout Standard
-This is a line where the word
-\begin_inset ERT
+\begin_layout Section
+DVI
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-
-\backslash
-colorbox{red}{
+File Formats ! DVI
\end_layout
\end_inset
-\begin_inset Quotes eld
-\end_inset
-
-Attention!
-\begin_inset Quotes erd
-\end_inset
-
+\begin_inset Index idx
+status collapsed
+\begin_layout Plain Layout
+DVI|see
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+{
\end_layout
\end_inset
- has a red background.
+File Formats
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-If you would have the box frame in a different color, you can use the command
-
-\series bold
-\backslash
-fcolorbox
-\series default
- with the following scheme:
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-fcolorbox{frame color}{box color}{box content}
\end_layout
\begin_layout Standard
+This file type has the extension
+\begin_inset Quotes eld
+\end_inset
-\series bold
-
-\backslash
-fcolorbox
-\series default
- is an extension to
-\series bold
-
-\backslash
-colorbox
-\series default
-.
- The frame thickness and the space between the frame and the box content
- can be adjusted with the lengths
-\series bold
-\backslash
-fboxrule
-\series default
- and
-\series bold
+\family typewriter
+.dvi
+\family default
-\backslash
-fboxsep
-\series default
-, respectively, as described in section
-\begin_inset space ~
+\begin_inset Quotes erd
\end_inset
+.
+ It is called
+\begin_inset Quotes eld
+\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Decoration"
-
+device-independent
+\begin_inset Quotes erd
\end_inset
-.
+ (DVI), because it is completely portable; you can move them from one machine
+ to another without needing to do any sort of conversion.
+ At the time when this file-format was developed, this was no matter of
+ course.
+ DVIs are used for quick previews and as pre-stage for other output formats,
+ like PostScript.
\end_layout
\begin_layout Standard
-For the following example the command
-\end_layout
+\begin_inset Note Greyedout
+status open
-\begin_layout Standard
+\begin_layout Plain Layout
\series bold
+Note:
+\series default
+ DVI-files do not contain images; they will only be a linked.
+\end_layout
-\backslash
-fcolorbox{cyan}{magenta}{
+\end_inset
+
+ So don't forget this, if you move your
+\family typewriter
+.dvi
+\family default
+ file to another computer.
+ This property can also slow down your computer when you view the DVI, because
+ the DVI-viewer has to convert the image in the background to make it visible
+ when you scroll in the DVI.
+ So it is recommended that you use PDF for files with many images.
\end_layout
\begin_layout Standard
-was used.
+You can export your document to DVI by using the menu
+\family sans
+File\SpecialChar menuseparator
+Export\SpecialChar menuseparator
+DVI
+\family default
+.
+ You can view your document as DVI via the
+\family sans
+View
+\family default
+ menu.
\end_layout
-\begin_layout Standard
-Here is an example where the frame line thickness was set to 1
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Section
+PostScript
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+File Formats ! PostScript
+\end_layout
-mm:
-\begin_inset Newline newline
\end_inset
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+PostScript|see
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
+{
+\end_layout
+
+\end_inset
+
+File Formats
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
-\backslash
-fboxrule 1mm
-\backslash
-fboxsep 1mm
\end_layout
+\begin_layout Standard
+This file type has the extension
+\begin_inset Quotes eld
\end_inset
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+\family typewriter
+.ps
+\family default
+\begin_inset Quotes erd
+\end_inset
-\backslash
-fcolorbox{cyan}{magenta}{
-\end_layout
+.
+ PostScript was developed by the company
+\family typewriter
+Adobe
+\family default
+ as a printer language.
+ The file therefore contains commands that the printer uses to print the
+ file.
+ PostScript can be seen as a
+\begin_inset Quotes eld
+\end_inset
+programming language
+\begin_inset Quotes erd
\end_inset
-This is text within a colored, framed box.
-\begin_inset ERT
+; you can calculate with it and draw diagrams and images
+\begin_inset Foot
status collapsed
\begin_layout Plain Layout
+If you are interested to learn more about this, have a look at the \SpecialChar LaTeX
+-package
+
+\series bold
+PSTricks
+\series default
+
+\begin_inset CommandInset citation
+LatexCommand cite
+key "pstricks"
-}
+\end_inset
+
+.
\end_layout
\end_inset
-
+.
+ Due to this ability, the files are often bigger than PDFs.
\end_layout
\begin_layout Standard
-\begin_inset VSpace bigskip
+PostScript can only contain images in the format
+\begin_inset Quotes eld
\end_inset
-Of course you can also have colored text inside a colorbox:
-\begin_inset Newline newline
+Encapsulated PostScript
+\begin_inset Quotes erd
\end_inset
+ (EPS, file extension
+\begin_inset Quotes eld
+\end_inset
-\begin_inset ERT
-status collapsed
-\begin_layout Plain Layout
+\family typewriter
+.eps
+\family default
+\begin_inset Quotes erd
+\end_inset
-\backslash
-fcolorbox{cyan}{magenta}{
-\end_layout
+).
+ As \SpecialChar LyX
+ allows you to use any known image format in your document, it has to
+ convert images in the background to EPS.
+ If you have e.g.
+\begin_inset space ~
+\end_inset
+50
+\begin_inset space ~
\end_inset
+images in your document, \SpecialChar LyX
+ has to do 50
+\begin_inset space ~
+\end_inset
-\color yellow
-This is colored text within a colored, framed box.
-\color none
+conversions whenever you view or export your document.
+ This will slow down your work flow with \SpecialChar LyX
+ drastically.
+ So if you plan to use PostScript, you can insert your images directly as
+ EPS to avoid this problem.
+\end_layout
-\begin_inset ERT
+\begin_layout Standard
+You can export your document to PostScript using the menu
+\family sans
+File\SpecialChar menuseparator
+Export\SpecialChar menuseparator
+Postscript
+\family default
+.
+ You can view your document as PostScript via the
+\family sans
+View
+\family default
+ menu.
+\end_layout
+
+\begin_layout Section
+PDF
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-}
+File Formats ! PDF
\end_layout
\end_inset
-\begin_inset ERT
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-
-
-\backslash
-fboxrule 0.4pt
-\backslash
-fboxsep 3pt
+PDF
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-
-\series bold
-\begin_inset VSpace medskip
+This file type has the extension
+\begin_inset Quotes eld
\end_inset
-\end_layout
+\family typewriter
+.pdf
+\family default
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\begin_inset Quotes erd
+\end_inset
-\begin_layout Plain Layout
+.
+ The
+\begin_inset Quotes eld
+\end_inset
-\series bold
-Note:
-\series default
- Text in colorboxes cannot have line breaks.
- To color multiple text lines or paragraphs, use a box inside a colorbox
- as described in the following.
-\end_layout
+Portable Document Format
+\begin_inset Quotes erd
+\end_inset
+ (PDF) was developed by
+\family typewriter
+Adobe
+\family default
+ as a derivative of PostScript.
+ It is more compressed and it uses fewer commands than PostScript.
+ As the name
+\begin_inset Quotes eld
\end_inset
+portable
+\begin_inset Quotes erd
+\end_inset
+ implies, it can be processed at any computer system and the printed output
+ looks exactly the same.
\end_layout
-\begin_layout Subsection
-Color for Paragraphs
-\begin_inset CommandInset label
-LatexCommand label
-name "sub:Color-for-Paragraphs"
+\begin_layout Standard
+PDF can contain images in its own PDF format, in the format
+\begin_inset Quotes eld
+\end_inset
+Joint Photographic Experts Group
+\begin_inset Quotes erd
\end_inset
+ (JPG, file extension
+\begin_inset Quotes eld
+\end_inset
-\begin_inset Index
-status collapsed
-\begin_layout Plain Layout
-Color ! for Paragraphs
-\end_layout
+\family typewriter
+.jpg
+\family default
+\begin_inset Quotes erd
\end_inset
+ or
+\begin_inset Quotes eld
+\end_inset
-\end_layout
-
-\begin_layout Standard
-To set the background color for more than one text line, put the text into
- a minipage.
- Before the minipage insert the
-\series bold
-\backslash
-colorbox
-\series default
- command
-\end_layout
+\family typewriter
+.jpeg
+\family default
-\begin_layout Standard
+\begin_inset Quotes erd
+\end_inset
-\series bold
+), and in the format
+\begin_inset Quotes eld
+\end_inset
-\backslash
-colorbox{color}{
-\end_layout
+Portable Network Graphics
+\begin_inset Quotes erd
+\end_inset
-\begin_layout Standard
-in TeX-Code.
- Behind the minipage insert a closing brace
+ (PNG, file extension
\begin_inset Quotes eld
\end_inset
-\series bold
-}
-\series default
+\family typewriter
+.png
+\family default
\begin_inset Quotes erd
\end_inset
- in TeX-Code.
+).
+ Nevertheless you can use any other image format, because \SpecialChar LyX
+ converts them
+ in the background to one of these formats.
+ But as described in the section about PostScript, the image conversion
+ will slow down your work flow.
+ So it is recommended that you use images in one of the three mentioned
+ formats.
\end_layout
\begin_layout Standard
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+You can export your document to PDF via the menu
+\family sans
+File\SpecialChar menuseparator
+Export
+\family default
+ in three different ways:
+\end_layout
+\begin_layout Description
+PDF
+\begin_inset space ~
+\end_inset
-\backslash
-colorbox{lightgrey}{
+(ps2pdf) This uses the program
+\family typewriter
+ps2pdf
+\family default
+ that creates a PDF from a PostScript-version of your file.
+ The PostScript-version is produced by the program
+\family typewriter
+dvips
+\family default
+ which uses a DVI-version as intermediate step.
+ So this export variant consists of three conversions.
\end_layout
+\begin_layout Description
+PDF
+\begin_inset space ~
\end_inset
+(dvipdfm) This uses the program
+\family typewriter
+dvipdfm
+\family default
+ that converts your file in the background to DVI and in a second step to
+ PDF.
+\end_layout
-\begin_inset Box Frameless
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "t"
-use_parbox 0
-width "100col%"
-special "none"
-height "1in"
-height_special "totalheight"
-status collapsed
+\begin_layout Description
+PDF
+\begin_inset space ~
+\end_inset
-\begin_layout Plain Layout
-This is text with background color.
- This is text with background color.
+(pdflatex) This uses the program
+\family typewriter
+pdftex
+\family default
+ that converts your file directly to PDF.
\end_layout
-\begin_layout Plain Layout
-\begin_inset VSpace defskip
+\begin_layout Standard
+It is recommended that you use
+\family sans
+PDF
+\begin_inset space ~
\end_inset
-The text can have footnotes
-\begin_inset Foot
-status collapsed
+(pdflatex)
+\family default
+ because
+\family typewriter
+pdftex
+\family default
+ supports all features of actual PDF-versions, is quick and works stable.
+ The program
+\family typewriter
+dvipdfm
+\family default
+ is not under development and therefore a bit outdated.
+\end_layout
-\begin_layout Plain Layout
-Another example footnote
+\begin_layout Standard
+You can view your document as PDF via the
+\family sans
+View
+\family default
+ menu or by using a toolbar button.
\end_layout
+\begin_layout Chapter
+List of dvips color names
+\begin_inset CommandInset label
+LatexCommand label
+name "chap:List-of-dvips-colornames"
+
\end_inset
- and can include tables and figures.
+
\end_layout
-\begin_layout Plain Layout
-\align center
+\begin_layout Standard
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
+<lyxtabular version="3" rows="17" columns="4">
+<features tabularvalignment="middle">
+<column alignment="left" valignment="top" width="0pt">
+<column alignment="left" valignment="top" width="0pt">
+<column alignment="left" valignment="top" width="0pt">
+<column alignment="left" valignment="top" width="0pt">
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-a
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-!
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-3
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-<
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+white
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-b2
-\begin_inset Quotes erd
-\end_inset
-|
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
->
-\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
+Color
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-1
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-§
+ Color name
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-c
-\end_layout
-
-\end_inset
-</cell>
-</row>
-</lyxtabular>
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-
+white
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+}{
\end_layout
\end_inset
-
-\end_layout
-
-\begin_layout Section
-Rotated and Scaled Boxes
-\end_layout
-
-\begin_layout Standard
-To use the the commands described in this section, the LaTeX-package
-\series bold
-graphicx
-\series default
-
-\begin_inset Index
+Color
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! graphicx
+
+}
\end_layout
\end_inset
- needs to be loaded in the document preamble with the command
+ Color name
\end_layout
-\begin_layout Standard
-
-\series bold
-
-\backslash
-@ifundefined{rotatebox}
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-hphantom{ }
+fcolorbox{black}{
\end_layout
\end_inset
-{
-\backslash
-usepackage{graphicx}}{}
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+white
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\series bold
-Note:
-\series default
- Some DVI-viewers can't display rotated or scaled material.
+}{
\end_layout
\end_inset
-
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+Color
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\series bold
-Note:
-\series default
- Floats mustn't be inside a rotated or scaled box.
+}
\end_layout
\end_inset
-
-\end_layout
-
-\begin_layout Subsection
-Rotated Boxes
-\begin_inset Index
-status collapsed
-
-\begin_layout Plain Layout
-Boxes ! rotated
+ Color name
\end_layout
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-
-\begin_inset Index
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Rotated material
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-
-\begin_inset Index
+white
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Figures ! rotated
+
+}{
\end_layout
\end_inset
-
-\begin_inset Index
+Color
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Table Customization ! Rotating
+
+}
\end_layout
\end_inset
-
+ Color name
\end_layout
-\begin_layout Standard
-To rotate material, you can put it into a rotated box.
- Such a box is created using the command
-\series bold
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-\backslash
-rotatebox
-\series default
- in TeX-Code with the following scheme:
-\end_layout
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
+\begin_layout Plain Layout
-\series bold
\backslash
-rotatebox[rotation origin]{rotation angle}{box content}
-\end_layout
-
-\begin_layout Standard
-The rotation origin is specified in the form
-\series bold
-origin=position
-\series default
-.
- The following positions are possible:
-\emph on
-c
-\emph default
- (center),
-\emph on
-l
-\emph default
- (left),
-\emph on
-r
-\emph default
- (right),
-\emph on
-b
-\emph default
- (bottom),
-\emph on
-t
-\emph default
- (top), and also expedient combinations of the four base positions.
- For example
-\emph on
-lt
-\emph default
- means, that the rotation origin is at the top left corner of the box.
- When no rotation origin is specified, the position
-\emph on
-l
-\emph default
- will be used.
- The rotation angle is a number that can be negative that specifies the
- angle in degrees.
- The rotation direction is counterclockwise.
+fcolorbox{black}{
\end_layout
-\begin_layout Standard
-In the following example the command
-\series bold
-
-\backslash
-rotatebox[origin=c]{60}{
-\series default
- was inserted as TeX-Code before the text
-\begin_inset Quotes eld
\end_inset
-with rotated
-\begin_inset Quotes erd
-\end_inset
+Apricot
+\begin_inset ERT
+status collapsed
-; after the text the box was closed by a closing brace
-\series bold
-}
-\series default
- in TeX-Code.
+\begin_layout Plain Layout
+
+}{
\end_layout
-\begin_layout Standard
-This is a line
-\begin_inset ERT
-status collapsed
+\end_inset
-\begin_layout Plain Layout
+\begin_inset Phantom Phantom
+status open
-\backslash
-rotatebox[origin=c]{60}{
+\begin_layout Plain Layout
+W
\end_layout
\end_inset
-with rotated
+
\begin_inset ERT
status collapsed
\end_inset
- text.
+ Apricot
\end_layout
-\begin_layout Standard
-The box content can also be another box or an inline formula:
-\end_layout
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-\begin_layout Standard
-This is a line
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-rotatebox[origin=r]{-60}{
+fcolorbox{black}{
\end_layout
\end_inset
-
-\begin_inset Box Doublebox
-position "c"
-hor_pos "c"
-has_inner_box 0
-inner_pos "c"
-use_parbox 0
-width "1in"
-special "width"
-height "1in"
-height_special "totalheight"
+Aquamarine
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-with rotated
+
+}{
+\end_layout
+
+\end_inset
+
+
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
\end_inset
\end_inset
- framed text
+ Aquamarine
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-rotatebox[origin=lb]{60}{
+fcolorbox{black}{
\end_layout
\end_inset
-
-\begin_inset Formula $\int A\,\mathrm{d}x=B$
-\end_inset
-
-
+Bittersweet
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+}{
\end_layout
\end_inset
- and a formula.
-\end_layout
-\begin_layout Standard
-or an image or table:
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-This is a line
+\end_inset
+
+
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-
-\backslash
-rotatebox[origin=lb]{90}{
+}
\end_layout
\end_inset
-
-\begin_inset Graphics
- filename clipart/platypus.eps
- lyxscale 50
- width 25col%
+ Bittersweet
+\end_layout
\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
- with a rotated image
+BlueGreen
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-
-\backslash
-rotatebox[origin=l]{-90}{
+}{
\end_layout
\end_inset
-\begin_inset Tabular
-<lyxtabular version="3" rows="2" columns="2">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-q
+W
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-w
+
+}
+\end_layout
+
+\end_inset
+
+ BlueGreen
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-e
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+BlueViolet
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-r
+
+}{
\end_layout
\end_inset
-</cell>
-</row>
-</lyxtabular>
+
+
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
+\end_layout
\end_inset
\end_inset
- and table.
+ BlueViolet
\end_layout
-\begin_layout Subsection
-Scaled Boxes
-\begin_inset Index
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Boxes ! scaled
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-
-\begin_inset Index
+BrickRed
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Scaled material
+
+}{
\end_layout
\end_inset
-\begin_inset Index
-status collapsed
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-Figures ! scaled
+W
\end_layout
\end_inset
-\begin_inset Index
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Table Customization ! Scaling
+
+}
\end_layout
\end_inset
-
+ BrickRed
\end_layout
-\begin_layout Standard
-To scale material the commands
-\series bold
-
-\backslash
-scalebox
-\series default
- and
-\series bold
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-\backslash
-resizebox
-\series default
- can be used as TeX-Code.
-\end_layout
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
+\begin_layout Plain Layout
-\series bold
\backslash
-scalebox
-\series default
- is used with the following scheme:
+fcolorbox{black}{
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
+Brown
+\begin_inset ERT
+status collapsed
-\backslash
-scalebox{horizontal}[vertical]{box content}
-\end_layout
+\begin_layout Plain Layout
-\begin_layout Standard
-Horizontal and vertical are the corresponding scaling factors.
- If no vertical scaling factor is given, the horizontal factor will also
- be used as vertical one.
+}{
\end_layout
-\begin_layout Standard
-The command
-\series bold
-
-\backslash
-scalebox{2}{Hello}
-\series default
- creates for example a double size
-\begin_inset ERT
-status collapsed
+\end_inset
-\begin_layout Plain Layout
+\begin_inset Phantom Phantom
+status open
-\backslash
-scalebox{2}{
+\begin_layout Plain Layout
+W
\end_layout
\end_inset
-Hello
+
\begin_inset ERT
status collapsed
\end_inset
-, compared to the document text size.
+ Brown
\end_layout
-\begin_layout Standard
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
-\series bold
\backslash
-scalebox{2}[1]{Hello}
-\series default
- in contrary distorts the
+fcolorbox{black}{
+\end_layout
+
+\end_inset
+
+BurntOrange
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
+}{
+\end_layout
-\backslash
-scalebox{2}[1]{
+\end_inset
+
+
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
\end_inset
-Hello
+
\begin_inset ERT
status collapsed
\end_inset
-.
+ BurntOrange
\end_layout
-\begin_layout Standard
-If a the scaling factor is negative, the box content will be mirrored.
- Therefore the command
-\series bold
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-\backslash
-scalebox{-1}[1]{Hello}
-\series default
- can be used to create mirror writing:
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-scalebox{-1}[1]{
+fcolorbox{black}{
\end_layout
\end_inset
-Hello
+CadetBlue
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+}{
\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
+\end_inset
-\series bold
-\backslash
-scalebox{1}[-1]{Hello}
-\series default
- reflects the
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
+}
+\end_layout
+
+\end_inset
-\backslash
-scalebox{1}[-1]{
+ CadetBlue
\end_layout
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-Hello
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
- at the base line.
-\end_layout
+CarnationPink
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
-Equivalent to
-\series bold
+\begin_layout Plain Layout
+
+}{
+\end_layout
-\backslash
-scalebox{-1}[1]{box content}
-\series default
- there exists the command
-\begin_inset Newline newline
\end_inset
-\series bold
+\begin_inset Phantom Phantom
+status open
-\backslash
-reflectbox{box content}
-\series default
-.
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-The command
-\series bold
-
-\backslash
-resizebox
-\series default
- is used to scale the box to a defined width and height.
- The command scheme is:
-\end_layout
-\begin_layout Standard
+\begin_inset ERT
+status collapsed
-\series bold
+\begin_layout Plain Layout
-\backslash
-resizebox{width}{height}{box content}
+}
\end_layout
-\begin_layout Standard
-Is one of the two command arguments given as exclamation mark
-\series bold
-!
-\series default
-, the size is set so that the aspect ratio of the box content is kept.
+\end_inset
+
+ CarnationPink
\end_layout
-\begin_layout Standard
-The command
-\series bold
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-\backslash
-resizebox{2cm}{1cm}{Hello}
-\series default
- produces:
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-resizebox{2cm}{1cm}{
+fcolorbox{black}{
\end_layout
\end_inset
-Hello
+Cerulean
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+}{
\end_layout
\end_inset
-\begin_inset Newline newline
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
+\end_layout
+
\end_inset
-The command
-\series bold
-\backslash
-resizebox{2cm}{!}{Hello}
-\series default
- produces:
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
+}
+\end_layout
-\backslash
-resizebox{2cm}{!}{
+\end_inset
+
+ Cerulean
\end_layout
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-Hello
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+CornflowerBlue
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-\begin_inset Note Greyedout
+\begin_inset Phantom Phantom
status open
\begin_layout Plain Layout
+W
+\end_layout
-\series bold
-Note:
-\series default
- When arguments of
-\series bold
+\end_inset
-\backslash
-scalebox
-\series default
- or
-\series bold
-\backslash
-resizebox
-\series default
- are set to zero, no LaTeX-errors occur when exporting the document but
- the exported files can not or only partly be displayed.
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
\end_inset
-
+ CornflowerBlue
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Standard
-The boxes can be combined in any order.
- E.
-\begin_inset space \thinspace{}
\end_inset
-g.
-\begin_inset space \space{}
-\end_inset
+Dandelion
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
-the command
-\begin_inset Newline newline
\end_inset
-\series bold
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
+\end_layout
-\backslash
-rotatebox[origin=c]{-45}{
-\backslash
-resizebox{2cm}{!}{
-\backslash
-reflectbox{Hello}}}
-\begin_inset Newline newline
\end_inset
-\series default
-produces:
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Standard
-\align center
+\end_inset
+
+ Dandelion
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-rotatebox[origin=c]{-45}{
-\backslash
-resizebox{2cm}{!}{
-\backslash
-reflectbox{
+fcolorbox{black}{
\end_layout
\end_inset
-Hello
+DarkOrchid
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}}}
+}{
\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-\noindent
-Images, tables, and inline formulas are allowed as box content:
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Standard
-\align center
+\end_inset
+
+ DarkOrchid
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-rotatebox[origin=c]{-30}{
-\backslash
-resizebox{2cm}{!}{
-\backslash
-reflectbox{
+fcolorbox{black}{
+\end_layout
+
+\end_inset
+
+Emerald
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
\end_layout
\end_inset
-\begin_inset Graphics
- filename clipart/platypus.eps
- lyxscale 50
- width 25col%
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
+\end_layout
\end_inset
\begin_layout Plain Layout
-}}}
+}
\end_layout
\end_inset
+ Emerald
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\backslash
-rotatebox[origin=c]{-45}{
-\backslash
-resizebox{2cm}{!}{
-\backslash
-reflectbox{
+fcolorbox{black}{
\end_layout
\end_inset
-
-\begin_inset Tabular
-<lyxtabular version="3" rows="2" columns="2">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+ForestGreen
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-q
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-w
+W
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-e
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-r
+ ForestGreen
\end_layout
\end_inset
</cell>
-</row>
-</lyxtabular>
-
-\end_inset
-
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}}}
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-
+Fuchsia
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-
-\backslash
-rotatebox[origin=c]{-45}{
-\backslash
-resizebox{2cm}{!}{
-\backslash
-reflectbox{
+}{
\end_layout
\end_inset
-\begin_inset Formula $\int A\,\mathrm{d}x=B$
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
+\end_layout
+
\end_inset
\begin_layout Plain Layout
-}}}
+}
\end_layout
\end_inset
-
+ Fuchsia
\end_layout
-\begin_layout Standard
-When the global formula style
-\series bold
-fleqn
-\series default
- is used in the document
-\begin_inset Foot
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-When
-\begin_inset Quotes eld
-\end_inset
-fleqn
-\begin_inset Quotes erd
-\end_inset
- is added to the document class options.
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-, also display formulas can be scaled.
-\end_layout
-
-\begin_layout Chapter
-External Document Parts
-\begin_inset Index
+Goldenrod
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-External Document Parts
+
+}{
\end_layout
\end_inset
-\end_layout
+\begin_inset Phantom Phantom
+status open
-\begin_layout Standard
-With the menu
-\family sans
-Insert\SpecialChar \menuseparator
-File
-\family default
- you can insert external material to your document.
- This can be:
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Description
-LyX
-\begin_inset space ~
\end_inset
-Document Another LyX document; its content is directly inserted to your
- document.
-\end_layout
-\begin_layout Description
-Plain
-\begin_inset space ~
-\end_inset
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
-Text A text document; every of its text lines is inserted to your document
- as own paragraph.
+}
\end_layout
-\begin_layout Description
-Plain
-\begin_inset space ~
\end_inset
-Text,
-\begin_inset space ~
-\end_inset
+ Goldenrod
+\end_layout
-Join
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-Lines A text document; its text lines are inserted as they are.
- Empty text lines creates a new paragraph in your document.
-\end_layout
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\begin_layout Description
-External
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
-Material Files in various formats.
+
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Description
-Child
-\begin_inset space ~
\end_inset
-Document LyX or LaTeX-documents.
-\end_layout
-
-\begin_layout Section
-External Material
-\begin_inset Index
+Gray
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-External Document Parts ! External Material
+
+}{
\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-The external material feature allows you to insert files to your document
- without converting them previously to a format that can be read by the
- document output format because LyX takes care of needed conversions.
- This is similar to images that can be inserted in various image formats
- to LyX documents.
- When you have enabled Instant Preview in LyX's preferences under
-\family sans
-Look
-\begin_inset space ~
\end_inset
-and
-\begin_inset space ~
-\end_inset
-feel\SpecialChar \menuseparator
-Graphics
-\family default
-, the external material types Dia and Xfig is directly shown in LyX.
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Standard
-External material can be inserted via the
-\family sans
-External Material
-\family default
- dialog that is accessible with the menu
-\family sans
-Insert\SpecialChar \menuseparator
-File\SpecialChar \menuseparator
-External
-\begin_inset space ~
\end_inset
-Material
-\family default
-.
- Currently the following file types (
-\family sans
-Templates
-\family default
-) are allowed:
+ Gray
\end_layout
-\begin_layout Description
-ChessDiagram This template supports chess position diagrams made with the
- program
-\series bold
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-\begin_inset CommandInset href
-LatexCommand href
-name "XBoard"
-target "http://en.wikipedia.org/wiki/XBoard"
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
-\series default
-.
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Description
-Date This inserts the date in the form
-\emph on
-Day-Month-Year
-\emph default
-.
- This is a date inserted as external material:
-\begin_inset External
- template Date
- filename .
-
\end_inset
+GreenYellow
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
-\begin_inset space ~
\end_inset
-\begin_inset Note Note
+\begin_inset Phantom Phantom
status open
\begin_layout Plain Layout
-Remove the protected space when bug 4398 is fixed!
+W
\end_layout
\end_inset
-\begin_inset Newline newline
-\end_inset
-
-The date is not shown within LyX, only in the output.
- There are two other methods of inserting a date: Via menu
-\family sans
-Insert\SpecialChar \menuseparator
-Date
-\family default
- and with the LaTeX command
-\series bold
-
-\backslash
-today
-\series default
- as TeX-Code.
- The different methods are compared in Table
-\begin_inset space ~
-\end_inset
+\begin_inset ERT
+status collapsed
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Comparison-of-the"
+}
+\end_layout
\end_inset
-.
+ GreenYellow
\end_layout
-\begin_layout Description
-Dia This template supports diagrams created with the program
-\series bold
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
-\begin_inset CommandInset href
-LatexCommand href
-name "Dia"
-target "http://en.wikipedia.org/wiki/Dia_(software)"
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
-\series default
-.
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Description
-LilyPond This template is used for music notation typeset with the program
-\begin_inset Newline linebreak
\end_inset
+JungleGreen
+\begin_inset ERT
+status collapsed
-\series bold
+\begin_layout Plain Layout
-\begin_inset CommandInset href
-LatexCommand href
-name "LilyPond"
-target "http://en.wikipedia.org/wiki/LilyPond"
+}{
+\end_layout
\end_inset
-\series default
-.
-\end_layout
+\begin_inset Phantom Phantom
+status open
-\begin_layout Description
-PDFPages With this template you can insert PDF documents to your document.
- To insert certain or all pages of a PDF, use the
-\emph on
-pages
-\emph default
- option in the
-\family sans
-Option
-\family default
- field in the
-\family sans
-LaTeX and LyX options
-\family default
- tab according to the template description in the dialog.
- When no
-\emph on
-pages
-\emph default
- option is given, only the first page of the PDF will be inserted.
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Description
-RasterImage This can be used for bitmap images.
- Nearly all popular image formats are supported.
- The image can be treated in the
-\family sans
-External material
-\family default
- dialog like the images that are usually included via the
-\family sans
-Graphics
-\family default
- dialog as described in section
-\begin_inset space ~
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Graphics-Dialog"
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
-.
- The difference is that only raster images are allowed, that means that
- PDF and EPS-images are not supported.
+}
\end_layout
-\begin_layout Description
-XFig This template supports images created with the program
-\series bold
-
-\begin_inset CommandInset href
-LatexCommand href
-name "Xfig"
-target "http://en.wikipedia.org/wiki/Xfig"
-
\end_inset
-
-\series default
-.
+ JungleGreen
\end_layout
-\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Comparison-of-the"
-\end_inset
-Comparison of the date input methods.
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+Lavender
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="4" columns="4">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\end_inset
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-Document format
+W
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\family sans
-External Material\SpecialChar \menuseparator
-Date
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-\family sans
-Insert\SpecialChar \menuseparator
-Date
+ Lavender
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-command
-\series bold
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
\backslash
-today
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+LimeGreen
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-LyX
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-as inset box
+W
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-as date
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-as TeX-Code inset box
+ LimeGreen
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-LaTeX
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+Mahogany
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-as date
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-as date
+W
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-as command
+
+}
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-DVI, PDF, PS
+ Mahogany
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-as date
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+Mahogany
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-as date
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-as date
+W
\end_layout
\end_inset
-</cell>
-</row>
-</lyxtabular>
-\end_inset
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}
\end_layout
\end_inset
-
+ Mahogany
\end_layout
-\begin_layout Standard
-When you use the option
-\family sans
-Draft
-\family default
- in the
-\family sans
-File
-\family default
- tab of the
-\family sans
-External Material
-\family default
- dialog, only the path to the inserted file is shown in the output.
-\begin_inset Newline newline
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-External material is displayed in LyX either as box like this:
-\begin_inset Graphics
- filename clipart/ExternalMaterialQt4.png
- scale 85
- scaleBeforeRotation
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
- or as image, depending on the option
-\family sans
-Show in LyX
-\family default
- in the
-\family sans
-LaTeX and LyX options
-\family default
- tab of the dialog.
-\end_layout
-\begin_layout Standard
-The
-\family sans
-\emph on
-Customization
-\family default
-\emph default
- manual explains how you can define your own templates.
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Section
-Child Documents
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:Child-Documents"
+\end_inset
+
+Maroon
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
\end_inset
-\begin_inset Index
-status collapsed
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-External Document Parts ! Child Documents
+W
\end_layout
\end_inset
-\begin_inset Index
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Files ! Include
+
+}
\end_layout
\end_inset
-
+ Maroon
\end_layout
-\begin_layout Standard
-Child documents are used when you have a long document consisting of several
- larger parts or sections.
- For maintenance it is often useful and sometimes even required to split
- the document in several files that can be revised separately.
- The different documents are then the so called child documents and a master
- document connects them to print the full document or parts of it.
- A child documents inherits contents of its master, for example the LaTeX
- preamble, the bibliography, and labels for cross-references.
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Standard
-To be able to work on child documents without the need to open its master,
- specify in the child document the master in the menu
-\family sans
- Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
-Document
-\begin_inset space ~
\end_inset
-Class
-\family default
-.
- This master document will then be used in the background by LyX when you
- edit the child document.
-\end_layout
+Melon
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
-Included documents are displayed in LyX as a box like this:
-\begin_inset Graphics
- filename clipart/ChildDocumentQt4.png
- scale 85
- scaleBeforeRotation
+\begin_layout Plain Layout
-\end_inset
+}{
+\end_layout
- To include child documents to a master document use the menu
-\family sans
-Insert\SpecialChar \menuseparator
-File\SpecialChar \menuseparator
-Child
-\begin_inset space ~
\end_inset
-Documents
-\family default
-.
- A dialog pops up where you can choose between four include methods:
+
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Description
-Include You can include LyX and LaTeX-documents.
- When you press the
-\family sans
-Load
-\family default
- button in the
-\family sans
-Child Document
-\family default
- dialog, the included documents will be opened in LyX in a new file tab
- so that you can modify it.
-\begin_inset Newline newline
\end_inset
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Standard
-Here is a child document inserted using
-\family sans
-Include
-\family default
-:
-\begin_inset CommandInset include
-LatexCommand include
-filename "DummyDocument1.lyx"
+\end_inset
+
+ Melon
+\end_layout
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Standard
-The section numbering includes the sections of the included files in the
- order they are inserted in the master document.
- The included example document has for example a subsection that is numbered
- as subsection of this section.
- Labels of included documents can be referenced: Subsection
-\begin_inset space ~
\end_inset
+MidnightBlue
+\begin_inset ERT
+status collapsed
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sub:External-Subsection-1"
+\begin_layout Plain Layout
+
+}{
+\end_layout
\end_inset
-\end_layout
+\begin_inset Phantom Phantom
+status open
-\begin_layout Standard
-The preamble of the child document is ignored, only the preamble of the
- master document is used.
- Branches in child documents will be ignored by the master document when
- the master document does not have a branch with the same name.
- Included documents are inserted starting on a new page and end with a page
- break.
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-In case you are only working on a certain chapter of a large document and
- want to save compiling time, you can put each included file into a branch.
-\begin_inset Foot
+\end_inset
+
+
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Branches are described in section
-\emph on
-Branches
-\emph default
- of the LyX
-\emph on
-Userguide
-\emph default
-.
+
+}
\end_layout
\end_inset
- By enabling/disabling branches you can decide what included files will
- appear in the output.
+ MidnightBlue
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\series bold
-Note:
-\series default
- Due to a bug in LyX the LaTeX command
-\series bold
\backslash
-includeonly
-\series default
- can currently not be used as alternative to decide what files should be
- included.
+fcolorbox{black}{
\end_layout
\end_inset
+Mulberry
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
+\end_inset
+
+
+\begin_inset Phantom Phantom
status open
\begin_layout Plain Layout
-
-\series bold
-Note:
-\series default
- When you have included a LyX- or LaTeX-file, you are warned when you export/vie
-w the document in case that the child document uses another document class
- than the master document as this will lead to unexpected outputs.
+W
\end_layout
\end_inset
-\end_layout
+\begin_inset ERT
+status collapsed
-\begin_layout Description
-Input This method is very similar to the Include method.
- The differences are:
-\end_layout
+\begin_layout Plain Layout
-\begin_deeper
-\begin_layout Itemize
-Input files don't start with a new page and don't end with a page break.
+}
\end_layout
-\begin_layout Itemize
-Input files can be previewed in LyX when
-\family sans
-Instant
-\begin_inset space ~
\end_inset
-Preview
-\family default
- is enabled in LyX's preferences under
-\family sans
-Look
-\begin_inset space ~
-\end_inset
+ Mulberry
+\end_layout
-and
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-feel\SpecialChar \menuseparator
-Graphics
-\family default
-.
-\end_layout
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
-\begin_layout Itemize
-The LaTeX-command
-\series bold
\backslash
-includeonly
-\series default
- cannot be used.
+fcolorbox{black}{
\end_layout
-\end_deeper
-\begin_layout Standard
-Here is a child document inserted using
-\family sans
-Input
-\family default
-:
-\begin_inset CommandInset include
-LatexCommand input
-filename "DummyDocument2.lyx"
+\end_inset
+
+NavyBlue
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
+\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Description
-Verbatim With this method every text file can be included.
- The file is shown in the output with its source code, no command used in
- the text is invoked.
- You can use the option
-\family sans
-Mark spaces in output
-\family default
- that displays the character
-\begin_inset Quotes eld
\end_inset
\begin_layout Plain Layout
-
-\backslash
-textvisiblespace
+}
\end_layout
\end_inset
+ NavyBlue
+\end_layout
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
- for every space character in the source code.
- The difference to the method via the menu
-\family sans
-Insert\SpecialChar \menuseparator
-File\SpecialChar \menuseparator
-Plain
-\begin_inset space ~
-\end_inset
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-Text
-\family default
- is that the document content is not shown in LyX.
-\end_layout
+\begin_layout Plain Layout
-\begin_layout Standard
-Here is a child document inserted as Verbatim:
-\begin_inset CommandInset include
-LatexCommand verbatiminput
-filename "DummyTextDocument.txt"
+
+\backslash
+fcolorbox{black}{
+\end_layout
\end_inset
+OliveGreen
+\begin_inset ERT
+status collapsed
-\begin_inset VSpace bigskip
-\end_inset
+\begin_layout Plain Layout
-Here is a child document inserted as Verbatim using the
-\family sans
-Mark spaces in output
-\family default
- option:
-\begin_inset CommandInset include
-LatexCommand verbatiminput*
-filename "DummyTextDocument.txt"
+}{
+\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-\end_layout
-
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\series bold
-Note:
-\series default
- As you can see in the examples above, the text of the documents included
- as
-\family sans
-verbatim
-\family default
- is not broken at the end of the document lines.
+}
\end_layout
\end_inset
-
+ OliveGreen
\end_layout
-\begin_layout Description
-Listings This type is described in chapter
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "cha:Program-Code-Listings"
+\begin_layout Plain Layout
-\end_inset
-.
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\end_inset
+
+Orange
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\series bold
-Note:
-\series default
- Including the same document twice in a document using different methods
- could cause LaTeX-problems.
+}{
\end_layout
\end_inset
-\end_layout
+\begin_inset Phantom Phantom
+status open
-\begin_layout Chapter
-Program Code Listings
-\begin_inset CommandInset label
-LatexCommand label
-name "cha:Program-Code-Listings"
+\begin_layout Plain Layout
+W
+\end_layout
\end_inset
-\begin_inset Index
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Listings
+
+}
\end_layout
\end_inset
+ Orange
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-\begin_inset Index
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Program Code
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-
-\begin_inset Index
+OrangeRed
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Floats ! Listings
+
+}{
\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-To include and typeset program code you can use the
-\family sans
-Listings
-\family default
- inset that can be inserted via the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Program Listing
-\family default
-.
- The LaTeX-package
-\series bold
-listings
-\series default
+\end_inset
+
-\begin_inset Index
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! listings
+
+}
\end_layout
\end_inset
- provides a powerful and flexible way to insert program source code to your
- document.
-\end_layout
-
-\begin_layout Standard
-Right-clicking on a listings inset opens the context menu containing where
- you can set the listings format.
+ OrangeRed
\end_layout
-\begin_layout Standard
-By default, a listing starts a new paragraph in the output.
- The placement option
-\family sans
-Inline
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-listing
-\family default
- prints the listing inline like this:
-\begin_inset listings
-lstparams "language={C++}"
-inline true
-status open
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-int a=5;
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+Orchid
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
-\begin_inset Newline newline
-\end_inset
+}{
+\end_layout
-The option
-\family sans
-Float
-\family default
- creates a listings float where you can specify the placement options
-\begin_inset Quotes eld
\end_inset
-\family sans
-h
-\family default
+\begin_inset Phantom Phantom
+status open
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
+W
+\end_layout
-,
-\begin_inset Quotes eld
\end_inset
-\family sans
-t
-\family default
+\begin_inset ERT
+status collapsed
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
-,
-\begin_inset Quotes eld
-\end_inset
+}
+\end_layout
+\end_inset
-\family sans
-b
-\family default
+ Orchid
+\end_layout
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-, and
-\begin_inset Quotes eld
-\end_inset
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+\begin_layout Plain Layout
-\family sans
-p
-\family default
-\begin_inset Quotes erd
-\end_inset
+\backslash
+fcolorbox{black}{
+\end_layout
- corresponding to the float placement options described in section
-\begin_inset space ~
\end_inset
+Peach
+\begin_inset ERT
+status collapsed
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Float-Placement"
+\begin_layout Plain Layout
-\end_inset
+}{
+\end_layout
-.
- The placement options can be mixed and are inserted without any separation,
- e.
-\begin_inset space \thinspace{}
\end_inset
-g.
-\begin_inset space \space{}
-\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
+\end_layout
-\begin_inset Quotes eld
\end_inset
-\family sans
-htbp
-\family default
+\begin_inset ERT
+status collapsed
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
-.
- The option
-\begin_inset Quotes eld
-\end_inset
+}
+\end_layout
-h
-\begin_inset Quotes erd
\end_inset
- has sometimes no effect, but you don't need to use the
-\family sans
-Float
-\family default
- option in this case as also non-float listings can have captions and be
- referenced.
+ Peach
\end_layout
-\begin_layout Standard
-You can add captions to listings with the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Caption
-\family default
-.
- Listings can be referenced like floats: Listing
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+\begin_layout Plain Layout
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "lst:Example-Listing"
+
+\backslash
+fcolorbox{black}{
+\end_layout
\end_inset
+Periwinkle
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Standard
-\begin_inset listings
-lstparams "language=Python"
-inline false
+\end_inset
+
+
+\begin_inset Phantom Phantom
status open
\begin_layout Plain Layout
+W
+\end_layout
+
+\end_inset
+
-\begin_inset Caption
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "lst:Example-Listing"
+
+}
+\end_layout
\end_inset
-Example Listing float
+ Periwinkle
\end_layout
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-# Example listing float
-\end_layout
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-def func(param):
+
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Plain Layout
+\end_inset
- 'this is a python function'
-\end_layout
+PineGreen
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
- pass
+}{
\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-When you have set a programming language in the listings dialog, the keywords
- of this language will be recognized and specially typeset in the output.
- In the example listings the Python keyword
-\begin_inset Quotes eld
\end_inset
-def
-\begin_inset Quotes erd
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
+
\end_inset
- is recognized and printed bold in the output.
+ PineGreen
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
-status open
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\series bold
-Note:
-\series default
- If you don't get bold keywords when using typewriter fonts, your
-\family typewriter
-typewriter
-\family default
- font probably doesn't provide a bold shape.
- In this case select a different one in the menu
-\family sans
-Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
-Fonts
-\family default
-.
- (The fonts
-\emph on
-LuxiMono, BeraMono
-\emph default
- and
-\emph on
-Courier
-\emph default
- provide bold shapes.)
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+Plum
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Standard
-In section
-\family sans
-Line
-\begin_inset space ~
\end_inset
-numbering
-\family default
- of the listings dialog you can specify the line numbering style.
- You can insert a number to specify which lines are numbered to the field
-
-\family sans
-Step
-\family default
-.
- When you insert e.
-\begin_inset space \thinspace{}
-\end_inset
-g.
-\begin_inset space \space{}
-\end_inset
+\begin_inset Phantom Phantom
+status open
+\begin_layout Plain Layout
+W
+\end_layout
-\begin_inset Quotes eld
\end_inset
-3
-\begin_inset Quotes erd
-\end_inset
-, only every 3rd line will be numbered.
-\end_layout
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
-You can furthermore specify a range of lines, only these will then appear
- in the output.
- The option
-\family sans
-Extended character table
-\family default
- should be used when you use national characters like the German umlauts
- in the listing.
-\begin_inset Newline newline
-\end_inset
+\begin_layout Plain Layout
-Here is an example listing with left line numbering, step
-\begin_inset Quotes eld
-\end_inset
+}
+\end_layout
-3
-\begin_inset Quotes erd
\end_inset
-, language
-\begin_inset Quotes eld
-\end_inset
+ Plum
+\end_layout
-Python
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-, options
-\begin_inset Quotes eld
-\end_inset
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-Extended character table
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
- and
-\begin_inset Quotes eld
-\end_inset
-Space
-\begin_inset space ~
-\end_inset
+\backslash
+fcolorbox{black}{
+\end_layout
-as
-\begin_inset space ~
\end_inset
-symbol
-\begin_inset Quotes erd
-\end_inset
+ProcessBlue
+\begin_inset ERT
+status collapsed
-, range lines 3
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
+
+}{
+\end_layout
--
-\begin_inset space \thinspace{}
\end_inset
-8:
-\end_layout
-\begin_layout Standard
-\begin_inset listings
-lstparams "extendedchars=true,firstline=3,language=Python,lastline=8,numbers=left,showspaces=true,stepnumber=3"
-inline false
+\begin_inset Phantom Phantom
status open
\begin_layout Plain Layout
-
-def func(param):
+W
\end_layout
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
\begin_layout Plain Layout
- 'this is a python function'
+}
\end_layout
-\begin_layout Plain Layout
+\end_inset
- pass
+ ProcessBlue
\end_layout
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
\begin_layout Plain Layout
-def func(param):
+
+\backslash
+fcolorbox{black}{
\end_layout
+\end_inset
+
+Purple
+\begin_inset ERT
+status collapsed
+
\begin_layout Plain Layout
-'This is a German word: Tschüß'
+}{
\end_layout
-\begin_layout Plain Layout
+\end_inset
-pass
+
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
\begin_layout Plain Layout
-def func(param):
+}
\end_layout
-\begin_layout Plain Layout
+\end_inset
-'this is a python function'
+ Purple
\end_layout
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
\begin_layout Plain Layout
-pass
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+RawSienna
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Standard
-When you have tabulators in your listing, you can specify the number of
- characters that are spanned by a tabulator in the field
-\family sans
-Tabulator
-\begin_inset space ~
\end_inset
-size
-\family default
-.
-\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
+\begin_inset Phantom Phantom
status open
\begin_layout Plain Layout
-
-\series bold
-Note:
-\series default
- Due to a bug in the
-\series bold
-listings
-\series default
- package the line numbering is shifted by a line by every previous listing.
- That's the reason why the lines 2 and 5 are numbered in the above listing
- and not the lines 3 and 6.
+W
\end_layout
\end_inset
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
-
+ RawSienna
\end_layout
-\begin_layout Standard
-It is also possible to print lines from a file as listing.
- To do this, use the menu
-\family sans
-Insert\SpecialChar \menuseparator
-File\SpecialChar \menuseparator
-Child Document
-\family default
- and choose the type
-\family sans
-Listings
-\family default
-.
-\begin_inset Foot
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-The other child document types are described in section
-\begin_inset space ~
-\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Child-Documents"
+\backslash
+fcolorbox{black}{
+\end_layout
\end_inset
-.
-\end_layout
+RedOrange
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
- In the child document dialog you can specify the listing parameters in
- a text box.
- To show a list of all available parameters, type in a question mark
-\begin_inset Quotes eld
-\end_inset
+}{
+\end_layout
-?
-\begin_inset Quotes erd
\end_inset
- in the text box.
-\end_layout
-\begin_layout Standard
-To reference child document listings, write a label text into the corresponding
- field of the child document dialog.
- The label can then be referenced using the menu
-\family sans
-Insert\SpecialChar \menuseparator
-Cross-Reference
-\family default
-.
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-Listing
-\begin_inset space ~
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "lst:file-listing"
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
- is an example for a listing of a file; there the lines 10
-\begin_inset space \thinspace{}
-\end_inset
+}
+\end_layout
--
-\begin_inset space \thinspace{}
\end_inset
-15 of this LyX file are listed.
+ RedOrange
\end_layout
-\begin_layout Standard
-\begin_inset CommandInset include
-LatexCommand lstinputlisting
-filename "EmbeddedObjects.lyx"
-lstparams "breaklines=true,caption={Lines 10 - 15 of this LyX file},extendedchars=true,firstline=10,label={lst:file-listing},language={[LaTeX]TeX},lastline=15"
-
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+\backslash
+fcolorbox{black}{
\end_layout
-\begin_layout Standard
-\begin_inset VSpace bigskip
\end_inset
+RedViolet
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Standard
-Global listings settings can be set in the
-\family sans
-Document\SpecialChar \menuseparator
-Settings\SpecialChar \menuseparator
-Text Layout
-\family default
- dialog.
- To get there a list of available options, type in a question mark
-\begin_inset Quotes eld
\end_inset
-?
-\begin_inset Quotes erd
-\end_inset
- in the
-\family sans
-Listings
-\begin_inset space ~
-\end_inset
+\begin_inset Phantom Phantom
+status open
-settings
-\family default
- field.
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-For more information about the
-\series bold
-listings
-\series default
- package, we refer to its documentation
-\begin_inset CommandInset citation
-LatexCommand cite
-key "listings"
-
\end_inset
-.
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Standard
-\begin_inset Newpage newpage
\end_inset
-
+ RedViolet
\end_layout
-\begin_layout Chapter
-\start_of_appendix
-Units available in LyX
-\begin_inset Index
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-Units
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+Rhodamine
+\begin_inset ERT
+status collapsed
-\begin_inset CommandInset label
-LatexCommand label
-name "cha:Units-available-in"
+\begin_layout Plain Layout
+
+}{
+\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-To understand the units described in this documentation, Table
-\begin_inset space ~
\end_inset
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "tab:Units"
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
+\end_layout
\end_inset
- explains all units available in LyX.
+ Rhodamine
\end_layout
-\begin_layout Standard
-\begin_inset Float table
-placement h
-wide false
-sideways false
-status open
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Caption
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Units"
-\end_inset
-Units
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+RoyalBlue
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Plain Layout
-\begin_inset VSpace medskip
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="20" columns="2">
-<features>
-<column alignment="center" valignment="top" width="0">
-<column alignment="center" valignment="top" width="0">
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-unit
+}
+\end_layout
+
+\end_inset
+
+ RoyalBlue
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-name/description
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+RoyalPurple
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-mm
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-millimeter
+W
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-cm
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-centimeter
+ RoyalPurple
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-in
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+RubineRed
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-inch
+
+}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-pt
+W
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-point (72.27
-\begin_inset space \thinspace{}
-\end_inset
-pt = 1
-\begin_inset space \thinspace{}
+}
+\end_layout
+
\end_inset
-in)
+ RubineRed
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-pc
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-pica (1
-\begin_inset space \thinspace{}
-\end_inset
+Salmon
+\begin_inset ERT
+status collapsed
-pc = 12
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
-pt)
+}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-sp
+W
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-scaled point (65536
-\begin_inset space \thinspace{}
-\end_inset
-sp = 1
-\begin_inset space \thinspace{}
+}
+\end_layout
+
\end_inset
-pt)
+ Salmon
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-bp
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-big point (72
-\begin_inset space \thinspace{}
-\end_inset
-bp = 1
-\begin_inset space \thinspace{}
-\end_inset
-in)
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+SeaGreen
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-dd
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-didot (1
-\begin_inset space \thinspace{}
-\end_inset
+W
+\end_layout
-dd
-\begin_inset Formula $\approx$
\end_inset
- 0.376
-\begin_inset space \thinspace{}
-\end_inset
-mm)
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-cc
+ SeaGreen
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-cicero (1
-\begin_inset space \thinspace{}
-\end_inset
+\begin_inset ERT
+status collapsed
-cc = 12
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
-dd)
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+Sepia
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-Scale%
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-% of original image width
+W
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-text%
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-% of text width
+ Sepia
\end_layout
\end_inset
</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-col%
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+SkyBlue
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-% of column width
+
+}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-page%
+W
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-% of paper width
+
+}
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-line%
+ SkyBlue
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-% of line width
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+SpringGreen
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-theight%
+
+}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-% of text height
+W
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-pheight%
+
+}
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-% of paper height
+ SpringGreen
\end_layout
\end_inset
</cell>
</row>
<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-ex
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+Tan
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-height of letter
-\emph on
-x
-\emph default
- in current font
+
+}{
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-em
+W
\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+
+
+\begin_inset ERT
+status collapsed
\begin_layout Plain Layout
-width of letter
-\emph on
-M
-\emph default
- in current font
+
+}
\end_layout
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-mu
+ Tan
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="left" valignment="top" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-math unit (1
-\begin_inset space \thinspace{}
-\end_inset
+\begin_inset ERT
+status collapsed
-mu = 1/18
-\begin_inset space \thinspace{}
-\end_inset
+\begin_layout Plain Layout
-em)
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-</cell>
-</row>
-</lyxtabular>
-\end_inset
+TealBlue
+\begin_inset ERT
+status collapsed
+\begin_layout Plain Layout
+}{
\end_layout
\end_inset
-\end_layout
+\begin_inset Phantom Phantom
+status open
-\begin_layout Chapter
-Output File Formats with Graphics
-\begin_inset CommandInset label
-LatexCommand label
-name "cha:Output-File-Formats"
+\begin_layout Plain Layout
+W
+\end_layout
\end_inset
-\end_layout
-
-\begin_layout Section
-DVI
-\begin_inset Index
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-File Formats ! DVI
+
+}
\end_layout
\end_inset
+ TealBlue
+\end_layout
-\begin_inset Index
-status collapsed
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
\begin_layout Plain Layout
-DVI|see
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-{
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-File Formats
+Thistle
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+}{
\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
\end_inset
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Standard
-This file type has the extension
-\begin_inset Quotes eld
\end_inset
+ Thistle
+\end_layout
-\family typewriter
-.dvi
-\family default
-
-\begin_inset Quotes erd
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-.
- It is called
-\begin_inset Quotes eld
-\end_inset
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+
+\backslash
+fcolorbox{black}{
+\end_layout
-device-independent
-\begin_inset Quotes erd
\end_inset
- (DVI), because it is completely portable; you can move them from one machine
- to another without needing to do any sort of conversion.
- At the time when this file-format was developed, this was no matter of
- course.
- DVIs are used for quick previews and as pre-stage for other output formats,
- like PostScript.
+Turquoise
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}{
\end_layout
-\begin_layout Standard
-\begin_inset Note Greyedout
+\end_inset
+
+
+\begin_inset Phantom Phantom
status open
\begin_layout Plain Layout
+W
+\end_layout
-\series bold
-Note:
-\series default
- DVI-files doesn't contain images, they will only be a linked.
+\end_inset
+
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
\end_inset
- So don't forget this, if you move your
-\family typewriter
-.dvi
-\family default
- file to another computer.
- This property can also slow down your computer when you view the DVI.
- Because the DVI-viewer has to convert the image in the background to make
- it visible when you scroll in the DVI.
- So we recommend to use PDF for files with many images.
+ Turquoise
\end_layout
-\begin_layout Standard
-You can export your document to DVI by using the menu
-\family sans
-File\SpecialChar \menuseparator
-Export\SpecialChar \menuseparator
-DVI
-\family default
-.
- You can view your document as DVI via the
-\family sans
-View
-\family default
- menu or by using the toolbar button
-\begin_inset Graphics
- filename ../images/buffer-view_dvi.png
- scale 85
- scaleBeforeRotation
+\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Plain Layout
-.
-\end_layout
-\begin_layout Section
-PostScript
-\begin_inset CommandInset label
-LatexCommand label
-name "sec:PostScript"
+\backslash
+fcolorbox{black}{
+\end_layout
\end_inset
-
-\begin_inset Index
+Violet
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-File Formats ! PostScript
+
+}{
\end_layout
\end_inset
-\begin_inset Index
-status collapsed
+\begin_inset Phantom Phantom
+status open
\begin_layout Plain Layout
-PostScript|see
+W
+\end_layout
+
+\end_inset
+
+
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-{
+}
\end_layout
\end_inset
-File Formats
+ Violet
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-}
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+VioletRed
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
\end_inset
+\begin_inset Phantom Phantom
+status open
+
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-This file type has the extension
-\begin_inset Quotes eld
\end_inset
-\family typewriter
-.ps
-\family default
+\begin_inset ERT
+status collapsed
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
+
+}
+\end_layout
-.
- PostScript was developed by the company
-\family typewriter
-Adobe
-\family default
- as printer language.
- The file contains therefore commands that the printer uses to print the
- file.
- PostScript can be seen as
-\begin_inset Quotes eld
\end_inset
-programming language
-\begin_inset Quotes erd
+ VioletRed
+\end_layout
+
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-; you can calculate with it and draw diagrams and images
-\begin_inset Foot
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-If you are interested to learn more about this, have a look at the LaTeX-package
-
-\series bold
-PSTricks
-\series default
-
-\begin_inset CommandInset citation
-LatexCommand cite
-key "pstricks"
-\end_inset
-.
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
-.
- Due to this ability, the files are often bigger than PDFs.
-\end_layout
+WildStrawberry
+\begin_inset ERT
+status collapsed
-\begin_layout Standard
-PostScript can only contain images in the format
-\begin_inset Quotes eld
-\end_inset
+\begin_layout Plain Layout
-Encapsulated PostScript
-\begin_inset Quotes erd
-\end_inset
+}{
+\end_layout
- (EPS, file extension
-\begin_inset Quotes eld
\end_inset
-\family typewriter
-.eps
-\family default
-
-\begin_inset Quotes erd
-\end_inset
+\begin_inset Phantom Phantom
+status open
-).
- As LyX allows you to use any known image format in your document, it has
- to convert images in the background to EPS.
- If you have e.g 50 images in your document, LyX has to do 50 conversions
- whenever you view or export your document.
- This will slow down your work flow with LyX drastically.
- So if you plan to use PostScript, you can insert your images directly as
- EPS to avoid this problem.
+\begin_layout Plain Layout
+W
\end_layout
-\begin_layout Standard
-You can export your document to PostScript using the menu
-\family sans
-File\SpecialChar \menuseparator
-Export\SpecialChar \menuseparator
-Postscript
-\family default
-.
- You can view your document as PostScript via the
-\family sans
-View
-\family default
- menu or by using the toolbar button
-\begin_inset Graphics
- filename ../images/buffer-view_ps.png
- scale 85
- scaleBeforeRotation
-
\end_inset
-.
-\end_layout
-\begin_layout Section
-PDF
-\begin_inset Index
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-File Formats ! PDF
+
+}
\end_layout
\end_inset
+ WildStrawberry
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-\begin_inset Index
+\begin_layout Plain Layout
+\begin_inset ERT
status collapsed
\begin_layout Plain Layout
-PDF
+
+
+\backslash
+fcolorbox{black}{
\end_layout
\end_inset
+YellowGreen
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+}{
\end_layout
-\begin_layout Standard
-This file type has the extension
-\begin_inset Quotes eld
\end_inset
-\family typewriter
-.pdf
-\family default
+\begin_inset Phantom Phantom
+status open
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
+W
+\end_layout
-.
- The
-\begin_inset Quotes eld
\end_inset
-Portable Document Format
-\begin_inset Quotes erd
-\end_inset
- (PDF) is developed by
-\family typewriter
-Adobe
-\family default
- as derivative from PostScript.
- It is more compressed and it uses much less commands than PostScript.
- As the name
-\begin_inset Quotes eld
-\end_inset
+\begin_inset ERT
+status collapsed
-portable
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
- implies, it can be processed at any computer system and the printed output
- looks exactly the same.
+}
\end_layout
-\begin_layout Standard
-PDF can contain images in its own PDF format, in the format
-\begin_inset Quotes eld
\end_inset
-Joint Photographic Experts Group
-\begin_inset Quotes erd
-\end_inset
+ YellowGreen
+\end_layout
- (JPG, file extension
-\begin_inset Quotes eld
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+\begin_layout Plain Layout
+\begin_inset ERT
+status collapsed
-\family typewriter
-.jpg
-\family default
+\begin_layout Plain Layout
-\begin_inset Quotes erd
-\end_inset
- or
-\begin_inset Quotes eld
-\end_inset
+\backslash
+fcolorbox{black}{
+\end_layout
+\end_inset
-\family typewriter
-.jpeg
-\family default
+YellowOrange
+\begin_inset ERT
+status collapsed
-\begin_inset Quotes erd
-\end_inset
+\begin_layout Plain Layout
-), and in the format
-\begin_inset Quotes eld
-\end_inset
+}{
+\end_layout
-Portable Network Graphics
-\begin_inset Quotes erd
\end_inset
- (PNG, file extension
-\begin_inset Quotes eld
-\end_inset
+\begin_inset Phantom Phantom
+status open
-\family typewriter
-.png
-\family default
+\begin_layout Plain Layout
+W
+\end_layout
-\begin_inset Quotes erd
\end_inset
-).
- Nevertheless you can use any other image format, because LyX converts them
- in the background to one of these formats.
- But as described in the section about PostScript, the image conversion
- will slow down your work flow.
- So it is recommended to use images in one of the three mentioned formats.
-\end_layout
-\begin_layout Standard
-You can export your document to PDF via the menu
-\family sans
-File\SpecialChar \menuseparator
-Export
-\family default
- in three different ways:
+\begin_inset ERT
+status collapsed
+
+\begin_layout Plain Layout
+
+}
\end_layout
-\begin_layout Description
-PDF
-\begin_inset space ~
\end_inset
-(ps2pdf) This uses the program
-\family typewriter
-ps2pdf
-\family default
- that creates a PDF from a PostScript-version of your file.
- The PostScript-version is produced by the program
-\family typewriter
-dvips
-\family default
- which uses a DVI-version as intermediate step.
- So this export variant consist of three conversions.
+ YellowOrange
\end_layout
-\begin_layout Description
-PDF
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
-(dvipdfm) This uses the program
-\family typewriter
-dvipdfm
-\family default
- that converts your file in the background to DVI and in a second step to
- PDF.
\end_layout
-\begin_layout Description
-PDF
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
-(pdflatex) This uses the program
-\family typewriter
-pdftex
-\family default
- that converts your file directly to PDF.
\end_layout
-\begin_layout Standard
-It is recommended to use
-\family sans
-PDF
-\begin_inset space ~
\end_inset
+</cell>
+<cell alignment="left" valignment="top" usebox="none">
+\begin_inset Text
-(pdflatex)
-\family default
- because
-\family typewriter
-pdftex
-\family default
- supports all features of actual PDF-versions, is quick and works stable
- without problems.
- The program
-\family typewriter
-dvipdfm
-\family default
- is not under development and therefore a bit outdated.
-\end_layout
+\begin_layout Plain Layout
-\begin_layout Standard
-You can view your document as PDF via the
-\family sans
-View
-\family default
- menu or by using the toolbar button
-\begin_inset Graphics
- filename ../images/buffer-view_pdf2.png
- scale 85
- scaleBeforeRotation
+\end_layout
\end_inset
+</cell>
+</row>
+</lyxtabular>
-
-\family sans
-(
-\family default
-that uses
-\family sans
-PDF
-\begin_inset space ~
\end_inset
-(pdflatex)
-\family default
-).
+
\end_layout
\begin_layout Chapter
\begin_inset space ~
\end_inset
-
+(
\begin_inset CommandInset ref
-LatexCommand eqref
+LatexCommand ref
reference "eq:Wgn"
\end_inset
-
+)
\begin_inset CommandInset label
LatexCommand label
name "cha:Explanation-of-Equation"
\end_layout
\begin_layout Standard
-The total width of
+We can calculate the total width of
\emph on
n
\emph default
table cells
-\begin_inset Formula $W_{\mathrm{tot\, n}}$
+\begin_inset Formula $W_{\mathrm{tot\,n}}$
\end_inset
- can be calculated to
-\end_layout
-
-\begin_layout Standard
-\begin_inset Formula \begin{equation}
-W_{\mathrm{tot}\, n}=n\cdot(W_{g\, n}+2\cdot\backslash\mbox{tabcolsep})+(n+1)\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_n}\end{equation}
+ as follows:
+\begin_inset Formula
+\begin{equation}
+W_{\mathrm{tot}\,n}=n\cdot(W_{g\,n}+2\cdot\backslash\mbox{tabcolsep})+(n+1)\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_n}
+\end{equation}
\end_inset
-
-\end_layout
-
-\begin_layout Standard
-Where
-\begin_inset Formula $W_{g\, n}$
+where
+\begin_inset Formula $W_{g\,n}$
\end_inset
- is the given width of all cells.
-
+ is the given width of all cells,
\series bold
\backslash
tabcolsep
\series default
- is the LaTeX-length between the cell text and the cell border, its default
- value is 6
+ is the \SpecialChar LaTeX
+-length between the cell text and the cell border (its default value
+ is 6
\begin_inset space \thinspace{}
\end_inset
-pt.
+pt).
\series bold
\end_inset
, the total width of a multicolumn
-\begin_inset Formula $W_{\mathrm{tot\, mult}}$
+\begin_inset Formula $W_{\mathrm{tot\,mult}}$
\end_inset
is
-\end_layout
-
-\begin_layout Standard
-\begin_inset Formula \begin{equation}
-W_{\mathrm{tot\, mult}}=W_{g\,\mathrm{mult}}+2\cdot\backslash\mbox{tabcolsep}+2\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_mult}\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{\mathrm{tot\,mult}}=W_{g\,\mathrm{mult}}+2\cdot\backslash\mbox{tabcolsep}+2\cdot\backslash\mbox{arrayrulewidth}\label{eq:Wtot_mult}
+\end{equation}
\end_inset
\end_inset
equal we can calculate the needed given width
-\begin_inset Formula $W_{g\, n}$
+\begin_inset Formula $W_{g\,n}$
\end_inset
when
n
\emph default
columns are spanned, so that each column has a total width of
-\begin_inset Formula $W_{\mathrm{tot\, mult}}/n$
+\begin_inset Formula $W_{\mathrm{tot\,mult}}/n$
\end_inset
:
-\end_layout
-
-\begin_layout Standard
-\begin_inset Formula \begin{equation}
-W_{g\, n}=(W_{g\,\mathrm{mult}}+(1-n)\cdot(2\cdot\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}))/n\end{equation}
+\begin_inset Formula
+\begin{equation}
+W_{g\,n}=\frac{W_{g\,\mathrm{mult}}+(1-n)\cdot(2\cdot\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth})}{n}
+\end{equation}
\end_inset
Frank Mittelbach and Michel Goossens:
\emph on
-The LaTeX Companion Second Edition.
+The \SpecialChar LaTeX
+ Companion Second Edition.
\emph default
Addison-Wesley, 2004
Helmut Kopka and Patrick W.
Daly:
\emph on
-A Guide to LaTeX Fourth Edition.
+A Guide to \SpecialChar LaTeX
+ Fourth Edition.
\emph default
Addison-Wesley, 2003
Leslie Lamport:
\emph on
-LaTeX: A Document Preparation System.
+\SpecialChar LaTeX
+: A Document Preparation System.
\emph default
Addison-Wesley, second edition, 1994
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "booktabs"
+key "arydshln"
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "booktabs"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/booktabs/booktabs.pdf"
+name "arydshln"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/arydshln/arydshln.pdf"
\end_inset
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! booktabs
+\SpecialChar LaTeX
+-packages ! arydshln
\end_layout
\end_inset
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "caption"
+key "booktabs"
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "caption"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/caption/caption.pdf"
+name "booktabs"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/booktabs/booktabs.pdf"
\end_inset
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! caption
+\SpecialChar LaTeX
+-packages ! booktabs
\end_layout
\end_inset
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "endfloat"
+key "caption"
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "endfloat"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/endfloat/endfloat.pdf"
+name "caption"
+target "http://mirrors.ctan.org/macros/latex/contrib/caption/caption-eng.pdf"
\end_inset
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! endfloat
+\SpecialChar LaTeX
+-packages ! caption
\end_layout
\end_inset
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "wrapfig"
+key "diagbox"
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "wrapfig"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/wrapfig/wrapfig.sty"
+name "diagbox"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/diagbox/diagbox.pdf"
\end_inset
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! wrapfig
-\begin_inset ERT
-status collapsed
+\SpecialChar LaTeX
+-packages ! diagbox
+\end_layout
-\begin_layout Plain Layout
+\end_inset
-\backslash
-vspace{4mm}
\end_layout
+\begin_layout Bibliography
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "endfloat"
+
+\end_inset
+
+Documentation of the \SpecialChar LaTeX
+-package
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "endfloat"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/endfloat/endfloat.pdf"
+
\end_inset
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! endfloat
\end_layout
\end_inset
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! footmisc
+\SpecialChar LaTeX
+-packages ! footmisc
\end_layout
\end_inset
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! hyperref
+\SpecialChar LaTeX
+-packages ! hyperref
\end_layout
\end_inset
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
\series default
-\begin_inset Index
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! hyperref
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Bibliography
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "KOMA-Script"
+
+\end_inset
+
+Documentation of the \SpecialChar LaTeX
+-package
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "KOMA-Script"
+target "http://mirror.ctan.org/macros/latex/contrib/koma-script/doc/scrguien.pdf"
+
+\end_inset
+
+
+\series default
+
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! hyperref
+\SpecialChar LaTeX
+-packages ! KOMA-Script
\end_layout
\end_inset
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "KOMA-script"
+key "lettrine"
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "KOMA-script"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/koma-script/scrguien.pdf"
+name "lettrine"
+target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/lettrine.pdf"
\end_inset
\series default
+ and an
+\begin_inset CommandInset href
+LatexCommand href
+name "example"
+target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/demo.pdf"
-\begin_inset Index
+\end_inset
+
+
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! KOMA-script
+\SpecialChar LaTeX
+-packages ! lettrine
\end_layout
\end_inset
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! listings
+\SpecialChar LaTeX
+-packages ! listings
\end_layout
\end_inset
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! marginnote
+\SpecialChar LaTeX
+-packages ! marginnote
\end_layout
\end_inset
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "pstricks"
+key "pdfpages"
\end_inset
-Web page of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "PSTricks"
-target "http://tug.org/PSTricks/"
+name "pdfpages"
+target "http://www.ctan.org/tex-archive/macros/latex/contrib/pdfpages/pdfpages.pdf"
\end_inset
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! PSTricks
+\SpecialChar LaTeX
+-packages ! pdfpages
\end_layout
\end_inset
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "sidecap"
+key "prettyref"
\end_inset
-Documentation of the LaTeX-package
+Documentation of the \SpecialChar LaTeX
+-package
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "sidecap"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/sidecap/sidecap.pdf"
+name "prettyref"
+target "http://www.ctan.org/tex-archive/macros/latex/contrib/prettyref/prettyref.pdf"
\end_inset
\series default
-\begin_inset Index
+\begin_inset Index idx
status collapsed
\begin_layout Plain Layout
-LaTeX-packages ! sidecap
+\SpecialChar LaTeX
+-packages ! prettyref
\end_layout
\end_inset
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "NewInLyX16"
+key "pstricks"
\end_inset
+Web page of the \SpecialChar LaTeX
+-package
+\series bold
\begin_inset CommandInset href
LatexCommand href
-name "Wiki page"
-target "http://wiki.lyx.org/LyX/NewInLyX16"
+name "PSTricks"
+target "http://tug.org/PSTricks/"
\end_inset
- about new features in
-\family sans
-LyX 1.6.0
-\family default
-.
+
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! PSTricks
\end_layout
-\begin_layout Standard
-\begin_inset CommandInset index_print
-LatexCommand printindex
+\end_inset
+
+
+\end_layout
+
+\begin_layout Bibliography
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "refstyle"
+
+\end_inset
+
+Documentation of the \SpecialChar LaTeX
+-package
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "refstyle"
+target "http://mirrors.ctan.org/macros/latex/contrib/refstyle/refstyle.pdf"
+
+\end_inset
+
+
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! refstyle
+\end_layout
\end_inset
\end_layout
-\begin_layout Standard
-\begin_inset FloatList figure
+\begin_layout Bibliography
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "sidecap"
+
+\end_inset
+
+Documentation of the \SpecialChar LaTeX
+-package
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "sidecap"
+target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/sidecap/sidecap.pdf"
\end_inset
+\series default
+
+\begin_inset Index idx
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+-packages ! sidecap
\end_layout
-\begin_layout Standard
-\begin_inset FloatList table
+\end_inset
+
+
+\end_layout
+
+\begin_layout Bibliography
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "NewInLyX20"
\end_inset
+\begin_inset CommandInset href
+LatexCommand href
+name "Wiki page"
+target "http://wiki.lyx.org/LyX/NewInLyX20"
+
+\end_inset
+
+ about new features in
+\family sans
+\SpecialChar LyX
+ 2.0
+\family default
+.
\end_layout
\begin_layout Standard
-\begin_inset FloatList algorithm
+\begin_inset CommandInset index_print
+LatexCommand printindex
+type "idx"
\end_inset
projects / lyx.git / blobdiff