-#LyX 2.3 created this file. For more info see http://www.lyx.org/
-\lyxformat 518
+#LyX 2.4 created this file. For more info see https://www.lyx.org/
+\lyxformat 614
\begin_document
\begin_header
\save_transient_properties true
% not to its caption
\usepackage[figure]{hypcap}
-% the pages of the TOC is numbered roman
+% the pages of the TOC are numbered roman
% and a PDF-bookmark for the TOC is added
\let\myTOC\tableofcontents
\renewcommand\tableofcontents{%
{\usepackage{diagbox}
\setboolean{diagbox}{true}}
{\setboolean{diagbox}{false}}
+% Added by lyx2lyx
+\setlength{\parskip}{\medskipamount}
+\setlength{\parindent}{0pt}
\end_preamble
\options bibliography=totoc,index=totoc,BCOR7.5mm,titlepage,captions=tableheading,dvipsnames,table
\use_default_options false
\begin_modules
initials
graphicboxes
+varwidth
\end_modules
-\maintain_unincluded_children false
+\maintain_unincluded_children no
\language english
\language_package default
-\inputencoding auto
-\fontencoding global
+\inputencoding utf8
+\fontencoding auto
\font_roman "lmodern" "default"
\font_sans "lmss" "default"
\font_typewriter "lmtt" "default"
\font_default_family default
\use_non_tex_fonts false
\font_sc false
-\font_osf false
+\font_roman_osf false
+\font_sans_osf false
+\font_typewriter_osf false
\font_sf_scale 100 100
\font_tt_scale 100 100
\use_microtype false
+\use_dash_ligatures true
\graphics default
\default_output_format pdf2
\output_sync 0
\bibtex_command default
-\index_command default
+\index_command makeindex
\paperfontsize 12
\spacing single
\use_hyperref true
\pdf_quoted_options "linkcolor=black, citecolor=black, urlcolor=blue, filecolor=blue, pdfpagelayout=OneColumn, pdfnewwindow=true, pdfstartview=XYZ, plainpages=false"
\papersize default
\use_geometry false
-\use_package amsmath 2
-\use_package amssymb 2
-\use_package cancel 0
-\use_package esint 0
+\use_package amsmath 1
+\use_package amssymb 1
+\use_package cancel 1
+\use_package esint 1
\use_package mathdots 1
-\use_package mathtools 0
+\use_package mathtools 1
\use_package mhchem 1
-\use_package stackrel 0
-\use_package stmaryrd 0
-\use_package undertilde 0
+\use_package stackrel 1
+\use_package stmaryrd 1
+\use_package undertilde 1
\cite_engine basic
\cite_engine_type default
\biblio_style plain
\suppress_date false
\justification true
\use_refstyle 0
+\use_minted 0
+\use_lineno 0
\notefontcolor #0000ff
\index Index
\shortcut idx
\end_index
\secnumdepth 3
\tocdepth 3
-\paragraph_separation skip
-\defskip medskip
-\quotes_language english
+\paragraph_separation indent
+\paragraph_indentation default
+\is_math_indent 0
+\math_numbering_side default
+\quotes_style english
+\dynamic_quotes 0
\papercolumns 1
\papersides 2
\paperpagestyle default
+\tablestyle default
\tracking_changes true
\output_changes false
+\change_bars false
+\postpone_fragile_content false
\html_math_output 0
\html_css_as_file 0
\html_be_strict false
-\author 227574939 "Kyttj"
-\author 2047637253 "Guillaume Munch"
+\docbook_table_output 0
+\docbook_mathml_prefix 1
+\author -1382599118 "Daniel"
+\author -712698321 "Jürgen Spitzmüller"
+\author 177693 "x"
+\author 274215730 "scott"
+\author 630872221 "Jean-Pierre Chrétien" jeanpierre.chretien@free.fr
\end_header
\begin_body
\begin_layout Title
\SpecialChar LyX
-'s detailed Figure, Table, Floats, Notes, Boxes and External Material manual
+'s detailed Figure,
+ Table,
+ Floats,
+ Notes,
+ Boxes and External Material manual
\end_layout
\begin_layout Author
\begin_layout Plain Layout
\noindent
-If you have comments or error corrections, please send them to the \SpecialChar LyX
- Documentatio
-n mailing list:
+If you have comments or error corrections,
+ please send them to the \SpecialChar LyX
+ Documentation mailing list:
+
\begin_inset CommandInset href
LatexCommand href
name "lyx-docs@lists.lyx.org"
target "lyx-docs@lists.lyx.org?subject=EmbeddedObjects manual"
type "mailto:"
+literal "false"
\end_inset
\begin_inset Note Note
-status collapsed
+status open
\begin_layout Plain Layout
-author: Uwe Stöhr
+author:
+ Uwe Stöhr
\end_layout
\end_inset
\family sans
-Version 2.2.x
+Version 2.4.x
\end_layout
\begin_layout Standard
status open
\begin_layout Plain Layout
-To export all parts of this document to PDF, PS, or DVI the \SpecialChar LaTeX
--packages
+To export all parts of this document to PDF,
+ PS,
+ or DVI the \SpecialChar LaTeX
+ packages
\series bold
arydshln
\series default
-,
+,
+
\series bold
colortbl
\series default
-,
+,
+
\series bold
-diagbox, lettrine, marginnote, picinpar
+diagbox,
+ lettrine,
+ marginnote,
+ picinpar
\series default
and
\series bold
sidecap
\series default
must be installed.
- If they are not installed you can export the document anyway but the sections
- where the packages are required won't appear in the output.
+ If they are not installed you can export the document anyway but the sections where the packages are required won't appear in the output.
\end_layout
\begin_layout Plain Layout
\series bold
-http://wiki.lyx.org/LyX/Manuals#EmbeddedObjects
+https://wiki.lyx.org/LyX/Manuals#EmbeddedObjects
\end_layout
\end_inset
\begin_layout Chapter
Figures
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Graphics|see
-\begin_inset ERT
-status collapsed
+Graphics
+\begin_inset IndexMacro see
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Figures
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\begin_layout Section
Graphics Dialog
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Figures ! Graphics Dialog
+Figures
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Graphics Dialog
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To insert an image into your document, place the cursor at the text position
- you want and click on the toolbar icon
+To insert an image into your document,
+ place the cursor at the text position you want and click on the toolbar icon
\begin_inset Info
type "icon"
arg "dialog-show-new-inset graphics"
\family default
.
Then a dialog will appear to choose the file to load.
- The image will appear in the output exactly at the position where it is
- in the text.
+ The image will appear in the output exactly at the position where it is in the text.
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Units-available-in"
+nolink "false"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Figures ! rotated
+Figures
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+rotated
\end_layout
\end_inset
-You can rotate images counter-clockwise by setting a rotation angle and
- a rotation origin.
+
+\end_layout
+
+\end_inset
+
+You can rotate images counter-clockwise by setting a rotation angle and a rotation origin.
The image will also be rotated inside \SpecialChar LyX
.
\begin_inset Newline newline
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Figures ! scaled
+Figures
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+scaled
\end_layout
\end_inset
-Images can be scaled by using a percentage value or by setting the width
- and height explicitly.
- If you set only the width or only the height, the other size will be determined
- automatically.
- If you set both, then the image will be transformed to the given size,
+
+\end_layout
+
+\end_inset
+
+Images can be scaled by using a percentage value or by setting the width and height explicitly.
+ If you set only the width or only the height,
+ the other size will be determined automatically.
+ If you set both,
+ then the image will be transformed to the given size,
possibly distorting it.
- To prevent the image from distortion, use the option
+ To prevent the image from distortion,
+ use the option
\family sans
Maintain aspect ratio
\family default
.
- The image will then be scaled so that its width and height don't exceed
- the specified dimensions.
+ The image will then be scaled so that its width and height don't exceed the specified dimensions.
\begin_inset Newline newline
\end_inset
-Images can be opened in a program of your choice by right-clicking on it
- and choosing the entry
+Images can be opened in a program of your choice by right-clicking on it and choosing the entry
\family sans
Edit
\begin_inset space ~
externally
\family default
in the context menu.
- The program can be set for every image format in the file format settings
- in \SpecialChar LyX
+ The program can be set for every image format in the file format settings in \SpecialChar LyX
's preferences.
\end_layout
\begin_layout Description
\family sans
+Coordinates
+\begin_inset space ~
+\end_inset
+
+and
+\begin_inset space ~
+\end_inset
+
Clipping
\family default
- Alternatively to the usage of scaling units it is possible to set image
- coordinates to adjust the height and width of the image in the output.
- The coordinates can also be calculated automatically by pressing the button
-
+ Alternatively to the usage of scaling units it is possible to set image coordinates to adjust the height and width of the image in the output.
+ The coordinates can also be calculated automatically by pressing the button
\family sans
Get
\begin_inset space ~
box
\family default
will only print the image region within the given coordinates.
- Normally you don't need to worry about image coordinates and can ignore
- this tab.
+ Normally you don't need to worry about image coordinates and can ignore this tab.
\end_layout
\begin_layout Description
\family default
In this tab you can modify the appearance of the image within \SpecialChar LyX
and \SpecialChar LaTeX
- experts
- can specify additional \SpecialChar LaTeX
+ experts can specify additional \SpecialChar LaTeX
options.
\begin_inset Newline newline
\end_inset
mode
\family default
- makes the image appear in the output only as a frame with the size of the
- image.
+ makes the image appear in the output only as a frame with the size of the image.
\begin_inset Newline newline
\end_inset
\family default
you can define or join an image settings group.
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Figures ! Settings grouping
+Figures
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Settings grouping
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
- Images within such a group share their settings, so adjusting one image
- of the group automatically also adjusts all other images of the group in
- the same way.
- So you can for example change the size for a bunch of images without the
- need to manually change each of them.
- Joining an existing group can also be done using the context menu of the
- image by checking the name of the desired group.
+ Images within such a group share their settings,
+ so adjusting one image of the group automatically also adjusts all other images of the group in the same way.
+ So you can for example change the size for a bunch of images without the need to manually change each of them.
+ Joining an existing group can also be done using the context menu of the image by checking the name of the desired group.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-This is an example image in EPS format
+This is an example image in PDF format
\begin_inset Foot
status collapsed
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Image-Formats"
+nolink "false"
\end_inset
\end_inset
- within a separate, horizontally centered paragraph:
+ within a separate,
+ horizontally centered paragraph:
\end_layout
\begin_layout Standard
\align center
\begin_inset Graphics
- filename clipart/mobius.eps
- scale 70
+ filename clipart/2D-intensity-plot.pdf
scaleBeforeRotation
rotateOrigin center
\begin_layout Standard
\align center
\begin_inset Graphics
- filename clipart/mobius.eps
- scale 70
+ filename clipart/2D-intensity-plot.pdf
draft
scaleBeforeRotation
rotateOrigin center
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Figures
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Figures
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Figures ! Floats
+Figures
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Floats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-For general explanations about floats, have a look at section
+For general explanations about floats,
+ have a look at section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:FloatIntroduction"
+nolink "false"
\end_inset
\end_inset
(# is the actual number).
- You can insert the image above the caption, like in Figure
+ You can insert the image above the caption,
+ like in Figure
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "fig:kill-plat"
+reference "fig:A-star-in"
+nolink "false"
\end_inset
- or below the caption, like in Figure
+ or below the caption,
+ like in Figure
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "fig:escher"
+reference "fig:A-3D-object"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Caption-Placement"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status open
\begin_layout Plain Layout
\align center
\begin_inset Graphics
- filename clipart/platypus.eps
+ filename clipart/Star-structure.pdf
+ lyxscale 60
width 50col%
scaleBeforeRotation
rotateOrigin center
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "fig:kill-plat"
+name "fig:A-star-in"
\end_inset
-A severely distorted platypus in a float.
+A star in a float.
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status open
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "fig:escher"
+name "fig:A-3D-object"
\end_inset
-M.C.
- Escher on acid.
+A 3D object.
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
\begin_inset Graphics
- filename clipart/escher-lsd.eps
+ filename clipart/3D-structure-distort.pdf
+ lyxscale 60
scale 80
scaleBeforeRotation
rotateOrigin center
\begin_layout Standard
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-References ! to Figures
+References
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+to Figures
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "fig:kill-plat"
+reference "fig:A-star-in"
+nolink "false"
\end_inset
and
\begin_inset CommandInset ref
LatexCommand ref
-reference "fig:escher"
+reference "fig:A-3D-object"
+nolink "false"
\end_inset
\end_inset
.
- It is important to use references to floats, rather than using vague references
- like
+ It is important to use references to floats,
+ rather than using vague references like
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, because \SpecialChar LaTeX
- will reposition the floats in the final document and it might
- not be
+,
+ because \SpecialChar LaTeX
+ will reposition the floats in the final document and it might not be
\begin_inset Quotes eld
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Referencing-Floats"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-Normally only one image is inserted to a figure float, but sometimes you
- might want to use two images with separate subcaptions.
+Normally only one image is inserted to a figure float,
+ but sometimes you might want to use two images with separate subcaptions.
This can be done by inserting image floats into existing image floats.
Note that only the main caption of the float is added to the List of Figures.
Figure
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:Two-distorted-images"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "fig:Undefinable-structure"
+reference "fig:Pink-object"
+nolink "false"
\end_inset
and
\begin_inset CommandInset ref
LatexCommand ref
-reference "fig:A-Platypus"
+reference "fig:A-star"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status open
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status collapsed
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "fig:Undefinable-structure"
+name "fig:Pink-object"
\end_inset
-Undefinable structure.
+Pink object.
\end_layout
\end_inset
\begin_layout Plain Layout
\begin_inset Graphics
- filename clipart/escher-lsd.eps
+ filename clipart/3D-structure-distort.pdf
width 45col%
scaleBeforeRotation
groupId distorted
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status collapsed
\begin_layout Plain Layout
\begin_inset CommandInset label
LatexCommand label
-name "fig:A-Platypus"
+name "fig:A-star"
\end_inset
-A Platypus.
+A star.
\end_layout
\end_inset
\begin_layout Plain Layout
\begin_inset Graphics
- filename clipart/platypus.eps
+ filename clipart/Star-structure.pdf
width 45col%
scaleBeforeRotation
groupId distorted
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Figures ! Image Formats
+Figures
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Image Formats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Output-File-Formats"
+nolink "false"
\end_inset
-, each output document format allows only a few image formats.
+,
+ each output document format allows only a few image formats.
\SpecialChar LyX
uses therefore the program
\family typewriter
\family default
in the background to convert the images to the right format.
To increase your work flow by avoiding these conversions in the background,
- you could choose to use only the image formats that can directly be embedded
- in the output file format.
+ you could choose to use only the image formats that can directly be embedded in the output file format.
The output file formats are explained in appendix
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Output-File-Formats"
+nolink "false"
\end_inset
\begin_inset space ~
\end_inset
-images consist of pixel values, often in a compressed form.
+images consist of pixel values,
+ often in a compressed form.
They are therefore not fully scalable and look pixelated in large zooms.
Well-known bitmap image formats are
\begin_inset Quotes eld
\begin_inset Quotes erd
\end_inset
- (GIF, file extension
+ (GIF,
+ file extension
\begin_inset Quotes eld
\end_inset
)
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-GIF|see
-\begin_inset ERT
-status collapsed
+GIF
+\begin_inset IndexMacro see
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Image formats
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- (PNG, file extension
+ (PNG,
+ file extension
\begin_inset Quotes eld
\end_inset
)
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-PNG|see
-\begin_inset ERT
-status collapsed
+PNG
+\begin_inset IndexMacro see
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Image formats
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- (JPG, file extension
+ (JPG,
+ file extension
\begin_inset Quotes eld
\end_inset
)
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-JPG|see
-\begin_inset ERT
-status collapsed
+JPG
+\begin_inset IndexMacro see
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Image formats
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\begin_inset space ~
\end_inset
-images consist of vectors and can therefore be scaled to any size without
- data loss.
- The scaling ability is necessary if you want to create presentations, because
- presentations are always scaled by the video projector.
+images consist of vectors and can therefore be scaled to any size without data loss.
+ The scaling ability is necessary if you want to create presentations,
+ because presentations are always scaled by the video projector.
Scaling is also useful for online documents to let the user zoom into diagrams.
\begin_inset Newline newline
\end_inset
\begin_inset Quotes erd
\end_inset
- (SVG, file extension
+ (SVG,
+ file extension
\begin_inset Quotes eld
\end_inset
)
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-SVG|see
-\begin_inset ERT
-status collapsed
+SVG
+\begin_inset IndexMacro see
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Image formats
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- (EPS, file extension
+ (EPS,
+ file extension
\begin_inset Quotes eld
\end_inset
)
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-EPS|see
-\begin_inset ERT
-status collapsed
+EPS
+\begin_inset IndexMacro see
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Image formats
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- (PDF, file extension
+ (PDF,
+ file extension
\begin_inset Quotes eld
\end_inset
)
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- (WMF, file extension
+ (WMF,
+ file extension
\begin_inset Quotes eld
\end_inset
)
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-SVG|see
-\begin_inset ERT
-status collapsed
+WMF
+\begin_inset IndexMacro see
+status open
\begin_layout Plain Layout
-
-{
-\end_layout
-
-\end_inset
-
Image formats
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
\end_layout
\end_inset
\begin_inset Quotes erd
\end_inset
-, because you can convert any bitmap image to a PDF or EPS-image and the
- result will still be a bitmap image.
- In such cases only a header with the image properties is added to the original
- image
+,
+ because you can convert any bitmap image to a PDF or EPS-image and the result will still be a bitmap image.
+ In such cases only a header with the image properties is added to the original image
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-In the case of PDF, the original image is additionally compressed.
+In the case of PDF,
+ the original image is additionally compressed.
\end_layout
\end_inset
\begin_layout Standard
Normally it is not possible to convert a bitmap image into a scalable one,
only vice versa.
- Only the image formats PDF and EPS can directly be embedded to PDF and
- PostScript output files, respectively.
- SVG and WMF-images are recalculated to bitmaps when the output file is
- generated because there is currently no adequate WMF/SVG
+ Only the image formats PDF and EPS can directly be embedded to PDF and PostScript output files,
+ respectively.
+ SVG and WMF-images are recalculated to bitmaps when the output file is generated because there is currently no adequate WMF/SVG
\begin_inset Formula $\to$
\end_inset
\begin_layout Chapter
Tables
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_layout Section
Introduction
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Introduction
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Introduction
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
Table
\family default
.
- The toolbar button offers you a graphical selection: move the mouse to
- set the column/row number of the table that should be created and then
- press a mouse button.
- When you use the menu to create a table, a dialog will appear, asking you
- for the number of rows and columns.
+ The toolbar button offers you a graphical selection:
+ move the mouse to set the column/row number of the table that should be created and then press a mouse button.
+ When you use the menu to create a table,
+ a dialog will appear,
+ asking you for the number of rows and columns
+\change_inserted -712698321 1554289643
+,
+ and you can select a specific (border) style
+\change_unchanged
+.
+\change_deleted -712698321 1554289644
+
\begin_inset Newline newline
\end_inset
-The default table has lines around any cell and the first row appears separated
- from the rest of the table.
- This separation occurs due to a double line: The cells of the first row
- have a line below them and the cells of the second row have a line above
- them.
+
+\change_inserted -712698321 1554289645
+
+\end_layout
+
+\begin_layout Standard
+The default table has lines around any cell and the first row appears separated from the rest of the table.
+ This separation occurs due to a double line:
+ The cells of the first row have a line below them and the cells of the second row have a line above them.
Here is an example table:
\end_layout
\end_layout
+\begin_layout Standard
+
+\change_inserted -712698321 1554289664
+This corresponds to the
+\begin_inset Quotes eld
+\end_inset
+
+Grid with Head
+\begin_inset Quotes erd
+\end_inset
+
+ table style listed in the style selection.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1554289664
+Other available styles include:
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted -712698321 1554289664
+A
+\begin_inset Quotes eld
+\end_inset
+
+simple grid
+\begin_inset Quotes erd
+\end_inset
+
+ which looks line the above table,
+ but without the first row being separated via double line,
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted -712698321 1554289664
+a border-less table with no lines at all,
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted -712698321 1554289664
+and a so-called
+\begin_inset Quotes eld
+\end_inset
+
+formal table
+\begin_inset Quotes erd
+\end_inset
+
+ as often used in professional publishing with horizontal lines only and bold top/bottom lines (see
+\emph on
+Embedded Objects
+\emph default
+ manual,
+ section
+\emph on
+Formal Tables
+\emph default
+).
+
+\change_inserted 630872221 1622640694
+ It is also possible to have an horizontal (thin) Footline above the last line.
+\change_unchanged
+
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1554289664
+The default style used in the dialog as well as the style used by the toolbar button can be changed in
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Text Layout
+\family default
+.
+ So if the default style above is not the one you need,
+ you should alter this setting.
+\end_layout
+
\begin_layout Section
Table Dialog
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Dialog
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Dialog
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-You can alter a table by clicking on it with the right mouse button, which
- brings up the context menu.
+You can alter a table by clicking on it with the right mouse button,
+ which brings up the context menu.
Under the menu entry
\family sans
More
\family default
- you can adjust the settings of that cell and row/column respectively where
- the cursor is currently placed.
+ you can adjust the settings of that cell and row/column respectively where the cursor is currently placed.
The context menu
\family sans
More\SpecialChar menuseparator
\family default
opens the table dialog where you can adjust more things.
Most of the dialog options also work on selections.
- This means if you select more cells, columns or rows, the action is done
- for the whole selection.
+ This means if you select more cells,
+ columns or rows,
+ the action is done for the whole selection.
Note that there is a difference between selecting the
\emph on
contents
\emph default
- of the cell, and the cell itself.
+ of the cell,
+ and the cell itself.
\begin_inset Newline newline
\end_inset
Apply
\family default
every change you make in the dialog is directly applied.
- If you move the cursor to another table cell the dialog will then also
- be updated with the parameters of the new cell.
+ If you move the cursor to another table cell the dialog will then also be updated with the parameters of the new cell.
If you change length values in the dialog you must press
\family sans
Return
Settings Here you can set the table width
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Width
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Width
\end_layout
\end_inset
-, and the horizontal alignment and the width of the current column.
+
+\end_layout
+
+\end_inset
+
+,
+ and the horizontal alignment and the width of the current column.
The alignment
\family sans
At
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Special-Cell-Alignment"
+nolink "false"
\end_inset
.
- When you have set a width you can also adjust the vertical alignment of
- the current row.
- A given width will allow the cell to have line breaks and multiple paragraphs
- of text, see sec.
+ When you have set a width you can also adjust the vertical alignment of the current row.
+ A given width will allow the cell to have line breaks and multiple paragraphs of text,
+ see sec.
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multiple-Lines-in"
+nolink "false"
\end_inset
.
- If you set no width, the column is as wide as the content of its widest
- cell.
+ If you set no width,
+ the column is as wide as the content of its widest cell.
\begin_inset Newline newline
\end_inset
-Furthermore, you can mark one or multiple cells of one row as a multicolumn
- cell, see sec.
+Furthermore,
+ you can mark one or multiple cells of one row as a multicolumn cell,
+ see sec.
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multicolumns"
+nolink "false"
\end_inset
- or the cells of one column as multirow cell, see sec.
+ or the cells of one column as multirow cell,
+ see sec.
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multirows"
+nolink "false"
\end_inset
\begin_inset Newline newline
\end_inset
-The rotate check boxes rotate the current cell, a selection, or the whole
- table counter-clockwise by 90
+The rotate check boxes rotate the current cell,
+ a selection,
+ or the whole table counter-clockwise by 90
\begin_inset space \thinspace{}
\end_inset
°.
The rotation is not shown within \SpecialChar LyX
-, only in the output.
+,
+ only in the output.
For more information see sec.
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Rotated-Table-Cells"
+nolink "false"
\end_inset
\series bold
Note:
+
\series default
Not all DVI-viewers are able to display rotations.
\end_layout
\begin_inset Newline newline
\end_inset
-A line with tables with different alignments:
+A line with tables with different alignments:
+
\begin_inset Tabular
<lyxtabular version="3" rows="2" columns="2">
<features tabularvalignment="top">
\end_inset
It is also possible to enter a \SpecialChar LaTeX
--argument which is needed for special table
- formattings, see sec.
+-argument which is needed for special table formattings,
+ see sec.
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multicolumn-Calculations"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Colored-Tables"
+nolink "false"
\end_inset
\end_layout
\begin_layout Description
-Borders In this tab you can add and delete border lines for the current
- row/column.
+Borders In this tab you can add and delete border lines for the current row/column.
\begin_inset Newline newline
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Formal-Tables"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Row-Spacing"
+nolink "false"
\end_inset
\begin_inset space ~
\end_inset
-table This tab is to make a table a multi-page table that can run over several
- pages.
+table This tab is to make a table a multi-page table that can run over several pages.
Sections
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Multi-page-Tables"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Special-Longtable-Issues"
+nolink "false"
\end_inset
\begin_layout Section
Table Toolbar
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Toolbar
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Toolbar
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The table toolbar is an alternative to the table dialog to be able to alter
- tables faster.
+The table toolbar is an alternative to the table dialog to be able to alter tables faster.
It should normally appear at the bottom of \SpecialChar LyX
-'s main window when the cursor
- is inside a table.
- You can alternatively switch it on to appear always, by right-clicking
- in \SpecialChar LyX
+'s main window when the cursor is inside a table.
+ You can alternatively switch it on to appear always,
+ by right-clicking in \SpecialChar LyX
's main menu bar.
\end_layout
arg "tabular-feature toggle-line-top"
\end_inset
- adds a line at the top of the current cell / row or of a selection
+
+\change_deleted -1382599118 1647157945
+adds
+\change_inserted -1382599118 1647157946
+toggles
+\change_unchanged
+ a line at the top of
+\change_inserted -1382599118 1647158116
+ every cell for
+\change_unchanged
+ the current
+\change_inserted -1382599118 1647157889
+ly
+\change_deleted -1382599118 1647157917
+ cell / row or of a
+\change_unchanged
+ select
+\change_deleted -1382599118 1647157923
+ion
+\change_inserted -1382599118 1647157925
+ed cells
+\change_unchanged
+
\end_layout
\begin_layout Labeling
arg "tabular-feature toggle-line-bottom"
\end_inset
- adds a line at the bottom of the current cell / row or of a selection
+
+\change_deleted -1382599118 1647157963
+adds
+\change_inserted -1382599118 1647157964
+toggles
+\change_unchanged
+ a line at the bottom of
+\change_inserted -1382599118 1647158114
+every cell for
+\change_unchanged
+the current
+\change_inserted -1382599118 1647157991
+ly
+\change_deleted -1382599118 1647158003
+ cell / row or of a
+\change_unchanged
+ select
+\change_deleted -1382599118 1647158007
+ion
+\change_inserted -1382599118 1647158009
+ed cells
+\change_unchanged
+
\end_layout
\begin_layout Labeling
arg "tabular-feature toggle-line-left"
\end_inset
- adds a line at the left side of the current cell / row or of a selection
+
+\change_deleted -1382599118 1647157971
+adds
+\change_inserted -1382599118 1647157972
+toggles
+\change_unchanged
+ a line at the left side of
+\change_inserted -1382599118 1647158111
+every cell for
+\change_unchanged
+the current
+\change_inserted -1382599118 1647158027
+ly
+\change_deleted -1382599118 1647158069
+ cell / row or of a
+\change_unchanged
+ select
+\change_deleted -1382599118 1647158043
+ion
+\change_inserted -1382599118 1647158044
+ed cells
+\change_unchanged
+
\end_layout
\begin_layout Labeling
arg "tabular-feature toggle-line-right"
\end_inset
- adds a line at the right side of the current cell / row or of a selection
+
+\change_deleted -1382599118 1647157974
+adds
+\change_inserted -1382599118 1647157975
+toggles
+\change_unchanged
+ a line at the right side of
+\change_inserted -1382599118 1647158109
+every cell for
+\change_unchanged
+the current
+\change_inserted -1382599118 1647158061
+ly
+\change_deleted -1382599118 1647158072
+ cell / row or of a
+\change_unchanged
+ select
+\change_deleted -1382599118 1647158078
+ion
+\change_inserted -1382599118 1647158082
+ed cells
+\change_inserted -712698321 1554289731
+
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
+
+\change_inserted -712698321 1554289910
\begin_inset Info
type "icon"
-arg "tabular-feature set-all-lines"
+arg "tabular-feature toggle-border-lines"
\end_inset
- adds lines around the current or selected cells - if the current cell no
- multicolumn cell this also affects the current row and column
+
+\change_deleted -1382599118 1647157966
+adds
+\change_inserted -1382599118 1647157967
+toggles
+\change_inserted -712698321 1554289910
+ a border around the currently selected cells
+\change_inserted -1382599118 1647040213
+
+\end_layout
+
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+
+\change_inserted -1382599118 1647158092
+\begin_inset Info
+type "icon"
+arg "tabular-feature toggle-inner-lines"
+\end_inset
+
+ toggles inner lines for the currently selected cells
+\change_unchanged
+
+\end_layout
+
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+\begin_inset Info
+type "icon"
+arg "tabular-feature toggle-all-lines"
+\end_inset
+
+ adds lines around the current or selected cells - if the current cell is not a multicolumn cell this also affects the current row and column
\end_layout
\begin_layout Labeling
arg "tabular-feature unset-all-lines"
\end_inset
- deletes all lines of the current or selected cells - if the current cell
- no multicolumn cell this also affects the current row and column
+ deletes all lines of the current or selected cells - if the current cell is not a multicolumn cell this also affects the current row and column
+\change_inserted -712698321 1554289920
+
+\end_layout
+
+\begin_layout Labeling
+\labelwidthstring 00.00.0000
+
+\change_inserted -712698321 1554292586
+\begin_inset Info
+type "icon"
+arg "tabular-feature reset-formal-default"
+\end_inset
+
+ If using a formal table,
+ this resets the border to its default (only horizontal lines in top and bottom rows)
+\change_unchanged
+
\end_layout
\begin_layout Labeling
\series bold
Note:
+
\series default
- For the output the vertical alignment of the first cell in a row is used
- for all following cells in the row.
+ For the output the vertical alignment of the first cell in a row is used for all following cells in the row.
\end_layout
\end_inset
\begin_layout Section
Edit Table Menu
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Edit Menu
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Edit Menu
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-In addition to the table dialog and toolbar, the menu
+In addition to the table dialog and toolbar,
+ the menu
\family sans
Edit\SpecialChar menuseparator
Table
\family default
- allows you to add and delete border lines for the current row/column and
- to set the current selection as multicolumn.
+ allows you to add and delete border lines for the current row/column and to set the current selection as multicolumn.
The menu is only available when the cursor is inside a table.
\end_layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Tables
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Tables
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Floats
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Floats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-For general explanations about floats, have a look at section
+For general explanations about floats,
+ have a look at section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:FloatIntroduction"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_layout
\begin_layout Standard
-The float appears as a collapsible box with a caption that has the label
-
+The float appears as a collapsible box with a caption that has the label
\begin_inset Quotes eld
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:a table float"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-Having the caption above the table is the common rule that is unfortunately
- not supported in \SpecialChar LaTeX
+Having the caption above the table is the common rule that is unfortunately not supported in \SpecialChar LaTeX
's standard classes.
- This means that, if you are using the document classes
+ This means that,
+ if you are using the document classes
\family sans
article
\family default
-,
+,
+
\family sans
book
\family default
-,
+,
+
\family sans
letter
\family default
-, or
+,
+ or
\family sans
report
\family default
-, there will be no space between the caption and the table.
- To insert the needed space, add the following option to the load command
- of the \SpecialChar LaTeX
+,
+ there will be no space between the caption and the table.
+ To insert the needed space,
+ add the following option to the load command of the \SpecialChar LaTeX
-package
\series bold
caption
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! caption
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+caption
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Caption-Placement"
+nolink "false"
\end_inset
\series bold
caption
\series default
-, which is described in section
+,
+ which is described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Caption-Formatting"
+nolink "false"
\end_inset
-, is used to adjust the caption format.
+,
+ is used to adjust the caption format.
\end_layout
\begin_layout Standard
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-References ! to Tables
+References
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+to Tables
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Referencing-Floats"
+nolink "false"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-If the table is too long to fit on one page, you can use the option
+If the table is too long to fit on one page,
+ you can use the option
\family sans
Use
\begin_inset space ~
\end_layout
\begin_layout Description
-Header: The current row is defined to be a header row that appears on all
- pages of the multi-page table; except for the first page, if
+Header:
+ The current row is defined to be a header row that appears on all pages of the multi-page table;
+ except for the first page,
+ if
\family sans
First
\begin_inset space ~
\begin_inset space ~
\end_inset
-header: The current row is defined to be a header row that appears on the
- first page of the multi-page table.
+header:
+ The current row is defined to be a header row that appears on the first page of the multi-page table.
\end_layout
\begin_layout Description
-Footer: The current row is defined to be a footer row that appears on all
- pages of the multi-page table; except for the last page, if
+Footer:
+ The current row is defined to be a footer row that appears on all pages of the multi-page table;
+ except for the last page,
+ if
\family sans
Last
\begin_inset space ~
\begin_inset space ~
\end_inset
-footer: The current row is defined to be a footer row that appears on the
- last page of the multi-page table.
+footer:
+ The current row is defined to be a footer row that appears on the last page of the multi-page table.
\end_layout
\begin_layout Description
-Caption: The current row contains the table caption.
+Caption:
+ The current row contains the table caption.
The row is reset as single column and a caption is inserted.
More about multi-page table captions is explained in sec.
\begin_inset space \thinspace{}
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multi-page-Table-Captions"
+nolink "false"
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-111, 222
+111,
+ 222
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-555, 222
+555,
+ 222
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multi-page-Table-Captions"
+nolink "false"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! Footnotes
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Footnotes
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
Footnotes can be inserted to every Multi-page table cell.
- They appear at the bottom of the page where the table cell with the footnote
- appears.
+ They appear at the bottom of the page where the table cell with the footnote appears.
Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:DiffCaptions"
+nolink "false"
\end_inset
\begin_layout Subsection
Multi-page Table Alignment
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! Alignment
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Alignment
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The horizontal alignment of multi-page tables can be set in the table settings
- dialog.
+The horizontal alignment of multi-page tables can be set in the table settings dialog.
For left- and right-alignment the table will be directly at the page border.
- To add space between the table and the border one has to set the alignment
- to center and change the value of the \SpecialChar LaTeX
+ To add space between the table and the border one has to set the alignment to center and change the value of the \SpecialChar LaTeX
-lengths
\series bold
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Units"
+nolink "false"
\end_inset
\backslash
LTleft
\series default
- controls the horizontal distance from the left page border to the multi-page
- table,
+ controls the horizontal distance from the left page border to the multi-page table,
+
\series bold
\backslash
\backslash
fill
\series default
-, which is in this case the same as an horizontal fill in \SpecialChar LyX
+,
+ which is in this case the same as an horizontal fill in \SpecialChar LyX
.
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multi-page-Table-Captions"
+nolink "false"
\end_inset
\begin_layout Subsection
Multi-page Table Captions
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! Captions
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Captions
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-A multi-page table cannot be put into a table float because floats can only
- be on one page.
- But the caption environment of floats can also be used for multi-page tables
- when you use the multi-page table option
+A multi-page table cannot be put into a table float because floats can only be on one page.
+ But the caption environment of floats can also be used for multi-page tables when you use the multi-page table option
\family sans
Caption
\family default
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Multi-page-Tables"
+nolink "false"
\end_inset
.
- Only one table row should contain a caption, either a header or a footer
- row.
+ Only one table row should contain a caption,
+ either a header or a footer row.
\end_layout
\begin_layout Standard
\end_inset
1:
+
\series default
- The table number is increased for every multi-page table, even if you did
- not set a caption for it.
+ The table number is increased for every multi-page table,
+ even if you did not set a caption for it.
For this reason you could have the case that e.
\begin_inset space \thinspace{}
\end_inset
2.1 in the list of tables if there are two multi-page tables without captions.
To avoid this you can add the following command in \SpecialChar TeX
- Code after every multi-page
- table without a caption:
+ Code after every multi-page table without a caption:
\end_layout
\begin_layout Plain Layout
\end_layout
\begin_layout Plain Layout
-This is not needed when none of your multi-page tables has a caption and
- you add the following code to the document preamble:
+This is not needed when none of your multi-page tables has a caption and you add the following code to the document preamble:
\end_layout
\begin_layout Plain Layout
\end_inset
2:
+
\series default
If you are using
\series bold
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! hyperref
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+hyperref
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\family sans
Document Settings
\family default
- dialog to link cross-references, the link to a multi-page table caption
- will always point to the beginning of the document.
+ dialog to link cross-references,
+ the link to a multi-page table caption will always point to the beginning of the document.
\end_layout
\end_inset
\begin_layout Subsubsection
References to multi-page tables
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! References
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+References
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To reference a multi-page table, insert a label into the caption.
+To reference a multi-page table,
+ insert a label into the caption.
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Referenced-multi-page-table"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-The caption layout can be set together with all other captions of your document
- using the \SpecialChar LaTeX
+The caption layout can be set together with all other captions of your document using the \SpecialChar LaTeX
-package
\series bold
caption
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! caption
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+caption
\end_layout
\end_inset
-, see section
+
+\end_layout
+
+\end_inset
+
+,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Caption-Formatting"
+nolink "false"
\end_inset
\begin_layout Subsubsection
Caption Width
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! Caption Width
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Caption Width
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_inset
in.
- To change it add the following command to your document preamble or as
- \SpecialChar TeX
+ To change it add the following command to your document preamble or as \SpecialChar TeX
Code into your document before the multi-page table that should be affected
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Units-available-in"
+nolink "false"
\end_inset
\begin_inset Caption Standard
\begin_layout Plain Layout
-Long full title with default width long full title with default width long
- full title with default width
+Long full title with default width long full title with default width long full title with default width
\begin_inset Argument 1
status collapsed
\series bold
Note:
+
\series default
When the \SpecialChar LaTeX
-package
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! caption
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+caption
\end_layout
\end_inset
- is used, as in this document, the full page width is used for the caption
- when you use the default value of 4
+
+\end_layout
+
+\end_inset
+
+ is used,
+ as in this document,
+ the full page width is used for the caption when you use the default value of 4
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \thinspace{}
\end_inset
-in wide caption, you can either use a value slightly different from 4.0
+in wide caption,
+ you can either use a value slightly different from 4.0
\begin_inset space \thinspace{}
\end_inset
-in, e.
+in,
+ e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \thinspace{}
\end_inset
-in, or the \SpecialChar LaTeX
+in,
+ or the \SpecialChar LaTeX
-command
\series bold
\begin_layout Subsubsection
Different Captions for Table Pages
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! Different Captions for Pages
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Different Captions for Pages
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-When the table captions for the following pages should differ from the one
- of the first table page, mark a empty row as header which contains a caption.
+When the table captions for the following pages should differ from the one of the first table page,
+ mark a empty row as header which contains a caption.
Then right-click on the caption and select in the context menu
\family sans
Caption
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:DiffCaptions"
+nolink "false"
\end_inset
- is an example of a multi-page table with different heading where the second
- caption does not include the table number.
+ is an example of a multi-page table with different heading where the second caption does not include the table number.
\end_layout
\begin_layout Standard
\begin_inset Text
\begin_layout Plain Layout
-111, 222
+111,
+ 222
\end_layout
\end_inset
\begin_layout Subsection
Multi-page Table Calculation
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! Calculation
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Calculation
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
\SpecialChar LaTeX
- calculates the height of table pages and their page breaks using so called
- chunks.
+ calculates the height of table pages and their page breaks using so called chunks.
Chunks are parts of tables that held at the same time in \SpecialChar LaTeX
's memory.
The default value was historically set to only 20
\end_inset
table rows.
- If you are using multi-page tables with many pages this may slow down the
- creation of your document.
+ If you are using multi-page tables with many pages this may slow down the creation of your document.
You can safely increase the chunk size to values of 100
\begin_inset space \thinspace{}
\end_inset
\begin_layout Subsection
Floats and Multi-page Tables
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! Floats
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Floats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-There might be problems when a float appears on the same page where a multi-page
- table starts.
- To avoid such a situation, insert a
+There might be problems when a float appears on the same page where a multi-page table starts.
+ To avoid such a situation,
+ insert a
\begin_inset Quotes eld
\end_inset
\begin_layout Subsection
Forced Page Breaks
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multi-page Table ! Forced Page Breaks
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multi-page Table
+\end_layout
+
+\end_inset
+
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Forced Page Breaks
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
By default tables are only broken between rows.
- If you have a cell with multiples lines and want to have a page break within
- the cell, insert the new line command
+ If you have a cell with multiples lines and want to have a page break within the cell,
+ insert the new line command
\begin_inset Quotes eld
\end_inset
\series bold
&
\series default
- the content of the corresponding following cell and delete the content
- of these cells.
+ the content of the corresponding following cell and delete the content of these cells.
\begin_inset Newline newline
\end_inset
\backslash
\series default
- command, insert as many
+ command,
+ insert as many
\series bold
&
\series default
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:ForcedPagebreak"
+nolink "false"
\end_inset
- the cell that should be broken is in the second column followed by another
- column.
+ the cell that should be broken is in the second column followed by another column.
Therefore the following command was inserted in the cell as \SpecialChar TeX
- Code after
-
+ Code after
\begin_inset Quotes eld
\end_inset
\series default
is only needed when a page break should definitely occur at this position,
otherwise it would be a conditional break.
- If your footer row of the multi-page table has for a certain reason no
- upper line but you would have a horizontal line where the cell is broken,
+ If your footer row of the multi-page table has for a certain reason no upper line but you would have a horizontal line where the cell is broken,
use this command instead:
\end_layout
\end_layout
\begin_layout Standard
-When the cell to be broken is in the last column, the command
+When the cell to be broken is in the last column,
+ the command
\end_layout
\begin_layout Standard
\begin_layout Standard
must be inserted as \SpecialChar TeX
Code at the beginning of the cell.
- This ensures that the part of the cell that will be displayed on the new
- page appears with the full width.
+ This ensures that the part of the cell that will be displayed on the new page appears with the full width.
\end_layout
\begin_layout Standard
\begin_inset Text
\begin_layout Plain Layout
-111, 222
+111,
+ 222
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Paolo, 11.
- Fürst von Montecompatri, 11.
- Fürst von Sulmona und Vivaro, 10.
- Fürst von Rossano, 5.
- Herzog von Canemorte, 11.
- Herzog von Palombara, 5.
+Paolo,
+ 11.
+ Fürst von Montecompatri,
+ 11.
+ Fürst von Sulmona und Vivaro,
+ 10.
+ Fürst von Rossano,
+ 5.
+ Herzog von Canemorte,
+ 11.
+ Herzog von Palombara,
+ 5.
Herzog von Castelchiodato,
\begin_inset ERT
status open
\end_inset
11.
- Herzog von Poggionativo, 11.
- Markis von Mentana, Norma, Civitella, Pratica, Moricone und Percille, 11.
- Graf von Valinfreda, 11.
- Baron von Cropalati, 11.
- Herr von Scarpa, Edelmann von Rom, Patrizier von Venedig, Neapel und Genua
+ Herzog von Poggionativo,
+ 11.
+ Markis von Mentana,
+ Norma,
+ Civitella,
+ Pratica,
+ Moricone und Percille,
+ 11.
+ Graf von Valinfreda,
+ 11.
+ Baron von Cropalati,
+ 11.
+ Herr von Scarpa,
+ Edelmann von Rom,
+ Patrizier von Venedig,
+ Neapel und Genua
\end_layout
\end_inset
\end_layout
\begin_layout Section
-Multiple Lines, Columns and Rows
+Multiple Lines,
+ Columns and Rows
\end_layout
\begin_layout Subsection
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Linebreaks
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Linebreaks
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\noindent
\begin_inset Float table
placement H
+alignment document
wide false
sideways false
status open
\end_layout
\begin_layout Standard
-Setting a fixed width for a column enables you to enter text as a paragraph
- with multiple lines and hyphenation.
+Setting a fixed width for a column enables you to enter text as a paragraph with multiple lines and hyphenation.
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-multiple"
+nolink "false"
\end_inset
-, create a 3×3 table, mark the first cell and right-click on it.
+,
+ create a 3×3 table,
+ mark the first cell and right-click on it.
In the appearing table dialog we set a cell width of 2.5
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \thinspace{}
\end_inset
-cm, only one line will appear.
- To get two lines, a justified line break (shortcut
+cm,
+ only one line will appear.
+ To get two lines,
+ a justified line break (shortcut
\begin_inset Info
type "shortcut"
arg "newline-insert linebreak"
\end_inset
) was added.
- If the text is wider than the set cell width, it will automatically be
- broken to several lines.
+ If the text is wider than the set cell width,
+ it will automatically be broken to several lines.
\end_layout
\begin_layout Standard
-If you have a long word in a cell with a fixed width, it cannot be hyphenated
- by \SpecialChar LaTeX
+If you have a long word in a cell with a fixed width,
+ it cannot be hyphenated by \SpecialChar LaTeX
if it is the first entry.
- Therefore you need to insert something to prevent the word not being the
- first entry.
+ Therefore you need to insert something to prevent the word not being the first entry.
So add a horizontal space of 0
\begin_inset space \thinspace{}
\end_inset
pt before the word.
- As the space is zero, it doesn't change the output.
+ As the space is zero,
+ it doesn't change the output.
Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-and"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multicolumns
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multicolumns
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To merge cells over multiple columns, select as many cells within a row
- as you want to merge and use either the table-toolbar button
+To merge cells over multiple columns,
+ select as many cells within a row as you want to merge and use either the table-toolbar button
\begin_inset Info
type "icon"
arg "tabular-feature multicolumn"
\end_inset
-, or the menu
+,
+ or the menu
\family sans
Edit\SpecialChar menuseparator
Table\SpecialChar menuseparator
Multicolumn
\family default
-, or right click on the marked cells and choose
+,
+ or right click on the marked cells and choose
\family sans
Multicolumn
\family default
\begin_layout Standard
Multicolumns have their own cell settings.
- That means changing cell borders, cell alignment, and the width only affects
- the multicolumn.
- Here is an example table with a multicolumn cell in the first row and one
- in the last row without the upper border:
+ That means changing cell borders,
+ cell alignment,
+ and the width only affects the multicolumn.
+ Here is an example table with a multicolumn cell in the first row and one in the last row without the upper border:
\end_layout
\begin_layout Standard
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Multicolumns ! Calculations
+Multicolumns
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Calculations
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
\SpecialChar LyX
- supports multicolumns directly, but we have to take account of the cell
- width of the columns spanned by the multicolumn cell.
+ supports multicolumns directly,
+ but we have to take account of the cell width of the columns spanned by the multicolumn cell.
\end_layout
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_inset
-Table with centered multicolumn text above two columns that have exactly
- half the width of the multicolumn cell
+Table with centered multicolumn text above two columns that have exactly half the width of the multicolumn cell
\begin_inset Argument 1
status collapsed
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-centered"
+nolink "false"
\end_inset
-, mark the first two cells in the first row of a 3×3 table and right-click
- on them.
+,
+ mark the first two cells in the first row of a 3×3 table and right-click on them.
Now choose for this cell
\emph on
multicolumn
\emph default
-,
+,
+
\emph on
centered alignment
\emph default
\end_inset
cm in the table dialog.
- The merged columns should have exactly half the width of the multicolumn
- cell, so that you would set a width of 1.25
+ The merged columns should have exactly half the width of the multicolumn cell,
+ so that you would set a width of 1.25
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-without-half"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\end_inset
-Table where the spanned table columns are not exactly half the width of
- the multicolumn cell
+Table where the spanned table columns are not exactly half the width of the multicolumn cell
\begin_inset Argument 1
status collapsed
\end_layout
\begin_layout Standard
-You can see that the first column is not half the width of the multicolumn
- cell, it is a bit bigger.
+You can see that the first column is not half the width of the multicolumn cell,
+ it is a bit bigger.
The reason is that the specified width of a cell
\begin_inset Formula $W_{g}$
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Explanation-of-Equation"
+nolink "false"
\end_inset
\emph on
n
\emph default
- columns are spanned can be calculated, so that each column has a total
- width of
+ columns are spanned can be calculated,
+ so that each column has a total width of
\begin_inset Formula $W_{\mathrm{tot\,multicolumn}}/n$
\end_inset
\begin_inset Formula $n=2$
\end_inset
-,
+,
+
\begin_inset Formula $W_{g\,\mathrm{multicolumn}}=2.5\,$
\end_inset
-cm and the default values for the lengths, so that equation
+cm and the default values for the lengths,
+ so that equation
\begin_inset CommandInset ref
LatexCommand ref
reference "eq:Wgn"
+nolink "false"
\end_inset
\begin_layout Standard
To enable calculations in \SpecialChar LaTeX
-, the \SpecialChar LaTeX
+,
+ the \SpecialChar LaTeX
-package
\series bold
calc
\series default
must be loaded with the document preamble line
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! calc
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+calc
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\family default
field of the table dialog.
Therefore you have to format the column by inserting a \SpecialChar LaTeX
--argument in the
- dialog.
+-argument in the dialog.
Here is an overview about the arguments:
\end_layout
\series bold
p{width}
\series default
- creates cell with a fixed width, its text is vertically top-aligned
+ creates cell with a fixed width,
+ its text is vertically top-aligned
\end_layout
\begin_layout Itemize
\series bold
m{width}
\series default
- creates cell with a fixed width, its text is vertically centered
+ creates cell with a fixed width,
+ its text is vertically centered
\end_layout
\begin_layout Itemize
\series bold
b{width}
\series default
- creates cell with a fixed width, its text is vertically bottom-aligned
+ creates cell with a fixed width,
+ its text is vertically bottom-aligned
\end_layout
\begin_layout Standard
By entering a \SpecialChar LaTeX
--argument, all cell settings set in the table dialog are overwritt
-en.
+-argument,
+ all cell settings set in the table dialog are overwritten.
\end_layout
\begin_layout Standard
\series bold
Note:
+
\series default
- Due to a bug, \SpecialChar LyX
+ Due to a bug,
+ \SpecialChar LyX
shows the overwritten settings anyway.
\end_layout
\end_layout
\begin_layout Standard
-As the text should be horizontally centered, the command
+As the text should be horizontally centered,
+ the command
\series bold
\backslash
\series bold
>{ }
\series default
- means, that the commands inside the braces are applied before the cell
- is created.
+ means,
+ that the commands inside the braces are applied before the cell is created.
\end_layout
\begin_layout Standard
-Although we have chosen centered alignment for the text of the multicolumn
- cell, it is still left aligned.
+Although we have chosen centered alignment for the text of the multicolumn cell,
+ it is still left aligned.
This is because \SpecialChar LyX
only applies the alignment to single columns.
So for the multicolumn cell we have to use the \SpecialChar LaTeX
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Multirows
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Multirows
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To merge cells over multiple rows, select as many cells within a column
- as you want to merge and use either the table-toolbar button
+To merge cells over multiple rows,
+ select as many cells within a column as you want to merge and use either the table-toolbar button
\begin_inset Info
type "icon"
arg "tabular-feature multirow"
\end_inset
-, or the menu
+,
+ or the menu
\family sans
Edit\SpecialChar menuseparator
Table\SpecialChar menuseparator
Multirow
\family default
-, or right click on the marked cells and choose
+,
+ or right click on the marked cells and choose
\family sans
Multirow
\family default
\end_layout
\begin_layout Standard
-The width of multirow cells is set by setting the width and alignment for
- the whole column.
+The width of multirow cells is set by setting the width and alignment for the whole column.
The
\family sans
Vertical Offset
\end_layout
\begin_layout Standard
-If the column of a multirow cell has no explicit width, the multirow cell
- inherits the alignment of the column.
+If the column of a multirow cell has no explicit width,
+ the multirow cell inherits the alignment of the column.
Otherwise it is by default left-aligned.
- To override the default, renew the command
+ To override the default,
+ renew the command
\series bold
\backslash
\begin_layout Standard
in the document preamble.
Then all entries of multirow cells in the document are centered.
- If centering is only needed for several tables, you can renew the command
- in a \SpecialChar TeX
+ If centering is only needed for several tables,
+ you can renew the command in a \SpecialChar TeX
Code box just before the table instead of the preamble.
- If the text should be right-aligned, replace
+ If the text should be right-aligned,
+ replace
\series bold
\backslash
\end_layout
\begin_layout Standard
-This is an example table with a right-aligned multirow cell that has a vertical
- offset of -4
+This is an example table with a right-aligned multirow cell that has a vertical offset of -4
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Standard
-To start a new line in a multirow you can use a forced line break (shortcut
-
+To start a new line in a multirow you can use a forced line break (shortcut
\begin_inset Info
type "shortcut"
arg "newline-insert newline"
\begin_layout Standard
To tell the reader what is meant by column and row headings in a table,
- it is helpful to split the first cell of the table by one or two diagonal
- lines.
+ it is helpful to split the first cell of the table by one or two diagonal lines.
This can be achieved by loading the \SpecialChar LaTeX
package
\series bold
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! picinpar
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+picinpar
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The first scheme divides the cell by a single diagonal line and the arguments
- are placed below and above this line.
+The first scheme divides the cell by a single diagonal line and the arguments are placed below and above this line.
The second scheme divides the cell by 2
\begin_inset space ~
\end_inset
\end_layout
\begin_layout Standard
-The 3-argument scheme is for example useful for cross-tables of sports leagues
- or distances:
+The 3-argument scheme is for example useful for cross-tables of sports leagues or distances:
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
—
+
\end_layout
\end_inset
\begin_layout Plain Layout
—
+
\end_layout
\end_inset
\begin_layout Plain Layout
—
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-For larger cross-tables one might use split cells in 2 or every corner of
- the table like in this example:
+For larger cross-tables one might use split cells in 2 or every corner of the table like in this example:
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
—
+
\end_layout
\end_inset
\begin_layout Plain Layout
—
+
\end_layout
\end_inset
\begin_layout Plain Layout
—
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To rotate the diagonal lines, the command option
+To rotate the diagonal lines,
+ the command option
\series bold
dir=direction
\series default
\series bold
NE
\series default
-,
+,
+
\series bold
SE
\series default
-,
+,
+
\series bold
SW
\series default
\begin_layout Standard
is used.
- If no direction is given, it will be NW.
+ If no direction is given,
+ it will be NW.
\end_layout
\begin_layout Standard
The necessary width of split cells is automatically calculated.
- Thus if you set a fixed column width smaller than the calculated one, the
- cell's content will protrude the cell borders:
+ Thus if you set a fixed column width smaller than the calculated one,
+ the cell's content will protrude the cell borders:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-If you need a certain width for columns with a split cell, use the command
- option
+If you need a certain width for columns with a split cell,
+ use the command option
\series bold
width=3cm
\series default
\backslash
-tabcolsep is necessary because the overall width is the width for the text
- (in this case the 4
+tabcolsep is necessary because the overall width is the width for the text (in this case the 4
\begin_inset space \thinspace{}
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! calc
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+calc
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
Note that the split cell needs to be the widest one in the column.
- Otherwise the length of the diagonal line cannot be calculated correctly
- like in this table:
+ Otherwise the length of the diagonal line cannot be calculated correctly like in this table:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-For multiple text lines in split cells one needs some extra height to fit
- the text to the cell.
+For multiple text lines in split cells one needs some extra height to fit the text to the cell.
This can be achieved with the
\series bold
\series bold
diagbox
\series default
-, see its documentation,
+,
+ see its documentation,
+
\begin_inset CommandInset citation
LatexCommand cite
key "diagbox"
+literal "true"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Formal
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Formal
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Example-booktabs-table"
+nolink "false"
\end_inset
\end_inset
.
- To make a table a formal table use the option
+ To make a table a formal table
+\change_inserted -712698321 1554290084
+,
+ select the table style
+\begin_inset Quotes eld
+\end_inset
+
+Formal
+\change_deleted 630872221 1622707670
+ Table
+\change_inserted 630872221 1622707670
+\SpecialChar ldots
+
+\change_inserted -712698321 1554290084
+
+\begin_inset Quotes erd
+\end_inset
+
+ in the Table Creation dialog or
+\change_unchanged
+ use the option
\family sans
Formal
\family default
\family sans
Borders
\family default
- tab of the table dialog.
+ tab of the table dialog
+\change_inserted -712698321 1554290131
+ (if you additionally check the option
+\family sans
+Use Default Formal Style
+\family default
+,
+ the border lines are adapted to a sensible default)
+\change_unchanged
+.
\end_layout
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_inset
-Example booktabs-table
+Example
+\change_deleted -712698321 1554292310
+booktabs-
+\change_inserted -712698321 1554292311
+formal
+\change_unchanged
+table
\end_layout
\end_inset
<lyxtabular version="3" rows="8" columns="4">
<features booktabs="true" tabularvalignment="middle">
<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
+
+\change_deleted -712698321 1554290161
\begin_inset ERT
status collapsed
\end_inset
+
+\change_unchanged
Detector thickness in µm
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" toplinertrim="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" toplineltrim="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\begin_inset Text
\begin_layout Plain Layout
+
+\change_deleted -712698321 1554290260
\begin_inset ERT
status collapsed
\end_inset
+
+\change_unchanged
LSF-spatial resolution
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Row-Spacing"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-Unlike normal tables, formal tables have no vertical table lines.
- The horizontal table lines can be set as for normal tables but they appear
- with different widths in the output:
+Unlike normal tables,
+ formal tables have no vertical table lines.
+ The horizontal table lines can be set as for normal tables but they appear with different widths in the output:
\begin_inset Newline newline
\end_inset
\end_layout
\begin_layout Standard
-This example is for the first line, the so called
+This example is for the first line,
+ the so called
\series bold
toprule
\series default
.
- If you want to change the width for the last line, replace
+ If you want to change the width for the last line,
+ replace
\series bold
toprule
\series default
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Units-available-in"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-Lines that do not span all table columns can be created by setting a table
- line for multicolumn cells.
+
+\change_deleted -712698321 1554290929
+Lines that do not span all table columns can be created by setting a table line for multicolumn cells.
\SpecialChar LyX
will then internally use the command
\series bold
\series default
to create this line.
Its full scheme is
+\change_inserted -712698321 1554291959
+As in table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Example-booktabs-table"
+nolink "false"
+
+\end_inset
+
+,
+ formal tables often use shortened lines to group columns.
+ This can be done in the borders widget of the table dialog.
+ With formal tables,
+ the top and bottom borders have to small offset lines to the left and the right.
+ Clicking on these will trim the line respectively.
+\change_unchanged
+
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1554291403
+If you need to adjust the length of the trimming or the height of the rules,
+ you have to resort to \SpecialChar TeX
+ Code.
+ The respective command (which is also used for the trimmed mid rules) is this:
+\change_unchanged
+
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
+
+\change_deleted -712698321 1554292020
The options of
\series bold
\series default
are currently not supported by \SpecialChar LyX
so you have to use \SpecialChar TeX
- Code to be able to
- use them.
+ Code to be able to use them.
\series bold
cmidrule
\series default
s can manually be created by inserting the command as \SpecialChar TeX
- Code as the first
- cell entry of the first cell of a row.
+ Code as the first cell entry of the first cell of a row.
The line is then drawn in the output above the current row.
+\change_unchanged
+
\end_layout
\begin_layout Standard
\series bold
endcol
\series default
- always needs to be specified, also when the line should span only one column.
+ always needs to be specified,
+ also when the line should span only one column.
The optional parameter
\series bold
trim
\begin_inset space \thinspace{}
\end_inset
-em.
+em
+\change_inserted -712698321 1554291561
+ (this is what is done if you use trimming from the dialog)
+\change_unchanged
+.
+\change_inserted -712698321 1554292039
+
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1554292207
+The
+\emph on
+height
+\emph default
+ option of
+\series bold
+
+\backslash
+cmidrule
+\series default
+ is currently not supported by \SpecialChar LyX
+,
+ and neither are the
+\emph on
+trimwidth
+\emph default
+ parameters.
+ If you need this you can manually insert a
+\series bold
+
+\backslash
+cmidrule
+\series default
+ with the respective settings as \SpecialChar TeX
+ Code as the first cell entry of the first cell of a row.
+ The line is then drawn in the output above the current row.
+ Table
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "tab:Special-booktabs-table"
+nolink "false"
+
+\end_inset
+
+ exemplifies this (in the sixth row).
+\change_unchanged
+
\end_layout
\begin_layout Standard
+
+\change_deleted -712698321 1554291078
\begin_inset VSpace bigskip
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Example-booktabs-table"
+nolink "false"
\end_inset
\begin_layout Standard
+\change_deleted -712698321 1554291077
+
\series bold
\backslash
\end_layout
\begin_layout Standard
+
+\change_deleted -712698321 1554291077
at the beginning of the second row and
\end_layout
\begin_layout Standard
+\change_deleted -712698321 1554291077
+
\series bold
\backslash
\end_layout
\begin_layout Standard
+
+\change_deleted -712698321 1554291077
in the sixth row.
+\change_unchanged
+
\end_layout
\begin_layout Standard
+
+\change_deleted -712698321 1554292212
\begin_inset VSpace bigskip
\end_inset
+\change_unchanged
+
\end_layout
\begin_layout Standard
-You might want to have overlapping
+You
+\change_inserted -712698321 1554291573
+also
+\change_unchanged
+might want to have overlapping
\series bold
\backslash
cmidrule
\series default
-s as in in Table
+s as
+\change_deleted -712698321 1554296804
+in
+\change_inserted -712698321 1554296808
+exemplified as well
+\change_unchanged
+ in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Special-booktabs-table"
+nolink "false"
\end_inset
+
+\change_inserted -712698321 1554291601
+,
+ even though this is considered bad style (so only use it if you really need to)
+\change_unchanged
.
This can be achieved with the \SpecialChar TeX
Code command
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Special-booktabs-table"
+nolink "false"
\end_inset
\begin_layout Standard
+\change_deleted -712698321 1554291798
+
\series bold
\backslash
cmidrule(r){2-2}
\backslash
cmidrule(l){3-4}
+\change_unchanged
+
\backslash
morecmidrules
\backslash
\begin_layout Standard
+\change_deleted -712698321 1554291810
+
\series bold
\backslash
midrule
+\change_unchanged
+
\backslash
morecmidrules
\backslash
\end_layout
\begin_layout Standard
-If you are in any way not satisfied with the border line spacing, you can
- use the following command to produce lines that span over all table columns
+If you are in any way not satisfied with the border line spacing,
+ you can use the following command to produce lines that span over all table columns
\series bold
:
\end_layout
\end_layout
\begin_layout Standard
-For more information about these features, refer to the manual of the \SpecialChar LaTeX
--package
-
+For more information about these features,
+ refer to the manual of the \SpecialChar LaTeX
+-package
\series bold
booktabs
\series default
\begin_inset CommandInset citation
LatexCommand cite
key "booktabs"
+literal "true"
\end_inset
.
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! booktabs
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+booktabs
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_inset
-Special booktabs-table
+Special
+\change_inserted -712698321 1554292295
+(ugly)
+\change_deleted -712698321 1554292304
+booktabs
+\change_inserted -712698321 1554292305
+formal
+\change_deleted -712698321 1554292300
+-
+\change_unchanged
+table
\end_layout
\end_inset
<lyxtabular version="3" rows="8" columns="4">
<features booktabs="true" tabularvalignment="middle">
<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
+<column alignment="center" valignment="top" width="0pt">
<row>
<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" bottomlinertrim="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\begin_inset Text
\begin_layout Plain Layout
+
+\change_deleted -712698321 1554291732
\begin_inset ERT
status collapsed
\end_inset
+\change_unchanged
+
\begin_inset ERT
status collapsed
\begin_inset ERT
-status collapsed
+status open
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" toplineltrim="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" usebox="none">
+<cell alignment="center" valignment="top" topline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
\begin_inset ERT
-status collapsed
+status open
\begin_layout Plain Layout
\backslash
-cmidrule{3-4}
+cmidrule
+\change_inserted -712698321 1554291896
+[2pt](l{7pt})
+\change_unchanged
+{3-4}
\end_layout
\end_inset
\begin_layout Section
Vertical Table Alignment
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Alignment
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Alignment
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To align tables vertically in a text line, the table must be inside a box.
+To align tables vertically in a text line,
+ the table must be inside a box.
The box can then be vertically aligned as described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Box-Dialog"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Minipages"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-As you will see, the content of the first and last table row is not correctly
- aligned.
- To get this alignment, the minipage box must be set into a raisebox.
+As you will see,
+ the content of the first and last table row is not correctly aligned.
+ To get this alignment,
+ the minipage box must be set into a raisebox.
\begin_inset Foot
status collapsed
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Vertical-Alignment"
+nolink "false"
\end_inset
\end_inset
- In the example above the second table in the first item is aligned using
- the \SpecialChar TeX
+ In the example above the second table in the first item is aligned using the \SpecialChar TeX
Code command
\end_layout
\series bold
Note:
+
\series default
- The alignment of the table row content to the surrounding text line is
- not exact.
+ The alignment of the table row content to the surrounding text line is not exact.
The required value for the
\series bold
\backslash
raisebox
\series default
- command for this alignment depends on the document font, the font size,
+ command for this alignment depends on the document font,
+ the font size,
and the table line thickness.
\end_layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Color
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Color
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Subsection
Colored Cells
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Color ! for Cells
+Table Color
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+for Cells
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Color ! for Table Cells
+Color
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+for Table Cells
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_layout
\begin_layout Standard
-If you only need colored text, mark the cells and choose a color in the
-
+If you only need colored text,
+ mark the cells and choose a color in the
\family sans
Text
\begin_inset space ~
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-colored-without"
+nolink "false"
\end_inset
\series default
.
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! colortbl
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+colortbl
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To create colored tables,
+To create colored tables,
+
\series bold
colortbl
\series default
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multicolumn-Calculations"
+nolink "false"
\end_inset
\family sans
red
\family default
-,
+,
+
\family sans
green
\family default
-,
+,
+
\family sans
yellow
\family default
-,
+,
+
\family sans
blue
\family default
-,
+,
+
\family sans
cyan
\family default
-,
+,
+
\family sans
magenta
\family default
-,
+,
+
\family sans
black
\family default
\end_layout
\begin_layout Standard
-to the document class options in the document settings, you can additionally
- use further 61
+to the document class options in the document settings,
+ you can additionally use further 61
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "chap:List-of-dvips-colornames"
+nolink "false"
\end_inset
.
- One of these colors,
+ One of these colors,
+
\family sans
Maroon
\family default
-, is used as example in Table
+,
+ is used as example in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-colored-using"
+nolink "false"
\end_inset
\begin_layout Labeling
\labelwidthstring 00.00.0000
-cmyk: cyan, magenta, yellow, black
+cmyk:
+ cyan,
+ magenta,
+ yellow,
+ black
\end_layout
\begin_layout Labeling
\labelwidthstring 00.00.0000
-rgb: red, green blue
+rgb:
+ red,
+ green blue
\end_layout
\begin_layout Labeling
\end_layout
\begin_layout Standard
-and the color values are comma separated numbers between 0 and 1 describing
- the factor for the corresponding color of the color model.
+and the color values are comma separated numbers between 0 and 1 describing the factor for the corresponding color of the color model.
\end_layout
\begin_layout Standard
\series bold
\backslash
-definecolor{darkgreen}{cmyk}{0.5, 0, 1, 0.5}
+definecolor{darkgreen}{cmyk}{0.5,
+ 0,
+ 1,
+ 0.5}
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-To color characters in the table, mark the cells and use the
+To color characters in the table,
+ mark the cells and use the
\family sans
Text
\begin_inset space ~
\family default
dialog.
If a cell contains \SpecialChar TeX
- Code mark only the characters, otherwise the colored
- \SpecialChar TeX
+ Code mark only the characters,
+ otherwise the colored \SpecialChar TeX
Code will cause \SpecialChar LaTeX
errors.
\end_layout
\series bold
Note:
+
\series default
Not all DVI-viewers are able to display self-defined colors.
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-colored-using"
+nolink "false"
\end_inset
- do the following: The color of the first column should be
+ do the following:
+ The color of the first column should be
\emph on
darkgreen
\emph default
\begin_layout Standard
as \SpecialChar LaTeX
-argument for this column.
- The first row should be light blue, therefore the \SpecialChar TeX
+ The first row should be light blue,
+ therefore the \SpecialChar TeX
Code command
\end_layout
is inserted to the first cell of this row.
Note that this overwrites the column color for the first cell.
The last cell of the last row is colored maroon by inserting the \SpecialChar TeX
- Code
- command
+ Code command
\end_layout
\begin_layout Standard
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_layout Subsection
Colored Rows
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Color ! for Rows
+Table Color
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+for Rows
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Color ! for Table Rows
+Color
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+for Table Rows
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-In case every second table row needs to be colored there is an alternative
- to the method described in the previous section: One loads the package
-
+In case every second table row needs to be colored there is an alternative to the method described in the previous section:
+ One loads the package
\series bold
xcolor
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! xcolor
-\begin_inset ERT
-status collapsed
+ packages
+\begin_inset IndexMacro subentry
+status open
\begin_layout Plain Layout
-
-
-\backslash
-vspace{4mm}
+xcolor
\end_layout
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! colortbl
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+colortbl
\end_layout
\end_inset
-, so
+
+\end_layout
+
+\end_inset
+
+,
+ so
\series bold
colortbl
\series default
must be installed in your \SpecialChar LaTeX
--distribution, otherwise you get \SpecialChar LaTeX
+-distribution,
+ otherwise you get \SpecialChar LaTeX
-errors.
\end_layout
\begin_layout Standard
that is either inserted in the document preamble or as \SpecialChar TeX
- Code before the
- first table to be colored.
+ Code before the first table to be colored.
row
\begin_inset space ~
\end_inset
-number is the number of the first row which should be colored according
- to the odd row color.
- commands can be additional commands that are executed before every table
- row.
+number is the number of the first row which should be colored according to the odd row color.
+ commands can be additional commands that are executed before every table row.
So for example the command
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-rowcolors"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-rowcolors-2"
+nolink "false"
\end_inset
\begin_inset space ~
\end_inset
-color are left empty, no color will be used so that the command
+color are left empty,
+ no color will be used so that the command
\end_layout
\begin_layout Standard
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_inset
-Table where every second row is colored cyan and at which there is a line
- between each row.
+Table where every second row is colored cyan and at which there is a line between each row.
\end_layout
\end_inset
\begin_layout Subsection
Colored Lines
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Color ! for Lines
+Table Color
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+for Lines
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Color ! for Table Lines
+Color
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+for Table Lines
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Line-Thickness"
+nolink "false"
\end_inset
-, the line thickness for all lines in a table can be adjusted with the length
-
+,
+ the line thickness for all lines in a table can be adjusted with the length
\series bold
\backslash
\end_layout
\begin_layout Standard
-To color vertical lines for example with green, create the following column
- format in the document preamble, according to the description in section
+To color vertical lines for example with green,
+ create the following column format in the document preamble,
+ according to the description in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Customized-Format"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-vertical-colored"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-If you want to have several colors, define more column formats.
+If you want to have several colors,
+ define more column formats.
\end_layout
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_inset VSpace bigskip
\end_inset
-To color horizontal lines for example with red, as in Table
+To color all horizontal lines for example with red,
+ as in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-horizontal-colored"
+nolink "false"
\end_inset
-, insert these commands in \SpecialChar TeX
- Code before the table or table float:
+,
+ insert these commands in \SpecialChar TeX
+ code before the table or table float:
\end_layout
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_layout
\begin_layout Standard
-To return to the default line color black, insert this command in \SpecialChar TeX
- Code
- after the table or table float:
+To return to the default line color black,
+ insert this command in \SpecialChar TeX
+ code after the table or table float:
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-colored"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_layout Standard
To color only some of the table lines another strategy is necessary.
- To color all following horizontal lines, insert this command as TeX code
- as last thing in the row that should be above the first colored line:
+ To color all following horizontal lines,
+ insert this command as \SpecialChar TeX
+ code as last thing in the row that should be above the first colored line:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-To go back to black lines, add this command as first thing in the row that
- is above the black lines:
+To go back to black lines,
+ add this command as first thing in the row that is above the black lines:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-With this one can color tables like the one in Table
+With this one can color table lines like in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-different-hor"
+nolink "false"
\end_inset
.
- However, with this method it is not possible to color the line above the
- first row of a table.
+ However,
+ with this method it is not possible to color the line above the first row of a table.
\end_layout
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\end_layout
\begin_layout Standard
-To change the color of vertical lines within a row, like in Table
+To change the color of vertical lines within a row,
+ like in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-different-ver"
+nolink "false"
\end_inset
-, one needs to use multicolumns.
- At first one needs to remove all vertical lines that don't run along the
- whole column.
+,
+ one needs to use multicolumns.
+ At first one needs to remove all vertical lines that don't run along the whole column.
Now one colors all lines using the command
\end_layout
\begin_layout Standard
as above.
- Finally one inserts this command as TeX code to ever cell in the row where
- one needs a vertical line in a different color:
+ Finally one inserts this command as \SpecialChar TeX
+ code to every cell in the row where one needs a vertical line in a different color:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-This adds a vertical line to both sides of the table.
- The left one will be green, the right one red.
+This adds a vertical line to both sides of the cell.
+ The left one will be green,
+ the right one red.
If no color change is necessary one can omit the
\series bold
\end_layout
\begin_layout Standard
-After this command insert the cell content the normal way and end the cell
- with a closing brace
+After this command insert the cell content the normal way and end the cell with a closing brace
\series bold
}
\series default
- in TeX code.
+ in \SpecialChar TeX
+ code.
\end_layout
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Rotated Cells
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Rotated Cells
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\series bold
Note:
+
\series default
Not all DVI-viewers are able to display rotations.
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
-reference "tab:Table-with-rotated-multi"
+reference "tab:Table-with-rotated"
+plural "false"
+caps "false"
+noprefix "false"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\series bold
Note:
+
\series default
Line breaks (shortcut
\begin_inset Info
\end_layout
\begin_layout Standard
-If you want to rotate table cells containing line breaks, you have to put
- the cell content into a minipage or a parbox.
+If you want to rotate table cells containing line breaks,
+ you have to put the cell content into a minipage or a parbox.
\begin_inset Foot
status collapsed
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Minipages"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Parboxes"
+nolink "false"
\end_inset
\end_inset
° the width of the box is the height of the cell.
+ To avoid to estimate a suitable box width one can use a minipage with a variable width.
+ Such a box is inserted by loading the module
+\family sans
+Variable-width
+\begin_inset space ~
+\end_inset
+
+Minipages
+\family default
+ in the document settings.
+ Then one can use the menu
+\family sans
+Insert\SpecialChar menuseparator
+Custom
+\begin_inset space ~
+\end_inset
+
+Insets\SpecialChar menuseparator
+Minipage
+\begin_inset space ~
+\end_inset
+
+
+\family default
+(Var.
+\begin_inset space ~
+\end_inset
+
+Width).
Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-rotated-multi"
+nolink "false"
\end_inset
- is an example for a rotated multiline cell where the box width was set
- to 3
-\begin_inset space \thinspace{}
-\end_inset
-
-cm.
+ is an example for a rotated multiline cell where a variable width minipage is used.
\end_layout
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_inset Text
\begin_layout Plain Layout
-\begin_inset Box Frameless
-position "t"
-hor_pos "c"
-has_inner_box 1
-inner_pos "t"
-use_parbox 0
-use_makebox 0
-width "3cm"
-special "none"
-height "1in"
-height_special "totalheight"
-thickness "0.4pt"
-separation "3pt"
-shadowsize "4pt"
-framecolor "black"
-backgroundcolor "none"
+\begin_inset Flex Minipage (Var. Width)
status open
\begin_layout Plain Layout
\end_inset
with line break
+\begin_inset space ~
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-For wide tables it is sometimes difficult to assure that the table does
- not protrude over the page margin.
- Setting a fixed width for every column of the table is the solution, but
- what amount of space is needed for each column?
+For wide tables it is sometimes difficult to assure that the table does not protrude over the page margin.
+ Setting a fixed width for every column of the table is the solution,
+ but what amount of space is needed for each column?
\end_layout
\begin_layout Standard
\begin_inset Formula $W_{\mathrm{table}}$
\end_inset
- can be calculated: Every column has the width of the specified column width
-
+ can be calculated:
+ Every column has the width of the specified column width
\begin_inset Formula $W_{\mathrm{column}}$
\end_inset
- (that the content of the column can consume) plus two times the separation
- between the column content and the column border (\SpecialChar LaTeX
+ (that the content of the column can consume) plus two times the separation between the column content and the column border (\SpecialChar LaTeX
length
\series bold
\backslash
tabcolsep
\series default
-, default 6
+,
+ default 6
\begin_inset space \thinspace{}
\end_inset
\backslash
arrayrulewidth
\series default
-, default 0.4
+,
+ default 0.4
\begin_inset space \thinspace{}
\end_inset
-pt): So if all
+pt):
+ So if all
\begin_inset Formula $n$
\end_inset
\begin_inset space ~
\end_inset
-columns have the same width, the table width is
+columns have the same width,
+ the table width is
\begin_inset Formula
\begin{equation}
W_{\mathrm{table}}=n\left(W_{\mathrm{column}}+2\backslash\mbox{tabcolsep}+\backslash\mbox{arrayrulewidth}\right)+\backslash\mbox{arrayrulewidth}
\end_layout
\begin_layout Standard
-The available width for a table is the space between the page margins or
- the width of a text column (for a two-column document) (\SpecialChar LaTeX
+The available width for a table is the space between the page margins or the width of a text column (for a two-column document) (\SpecialChar LaTeX
length
\series bold
\backslash
-columnwidth,
+columnwidth,
+
\begin_inset Formula $W_{\mathrm{column}}$
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! calc
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+calc
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multicolumn-Calculations"
+nolink "false"
\end_inset
\begin_inset space \thinspace{}
\end_inset
-columns with an uniform width and centered text, enter there for each column
- the command
+columns with an uniform width and centered text,
+ enter there for each column the command
\end_layout
\begin_layout Standard
\begin_inset space ~
\end_inset
-times the width than the 3 others, the calculation is
+times the width than the 3 others,
+ the calculation is
\begin_inset Formula
\begin{align}
\backslash\mbox{columnwidth} & =3\,W_{\mathrm{column}}+2\cdot0.75\,W_{\mathrm{column}}+\backslash\mbox{arrayrulewidth}\nonumber \\
\begin_layout Section
Table Customization
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table ! Customization
+Table
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Customization
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Customization ! Row Spacing
+Table Customization
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Row Spacing
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Formal-Tables"
+nolink "false"
\end_inset
\end_inset
em space.
- For normal tables the inserted space will unfortunately destroy the vertical
- table lines as in the following table:
+ For normal tables the inserted space will unfortunately destroy the vertical table lines as in the following table:
\begin_inset VSpace medskip
\end_inset
\begin_inset Newline newline
\end_inset
-So inserting space in the top of row for normal tables is only useful when
- you don't have vertical lines.
+So inserting space in the top of row for normal tables is only useful when you don't have vertical lines.
\end_layout
\begin_layout Description
\begin_inset space \thinspace{}
\end_inset
-em space, for normal tables the default size is 2
+em space,
+ for normal tables the default size is 2
\begin_inset space \thinspace{}
\end_inset
\end_inset
em space.
- For normal tables the inserted space will unfortunately destroy the vertical
- table lines as in the following table:
+ For normal tables the inserted space will unfortunately destroy the vertical table lines as in the following table:
\begin_inset VSpace medskip
\end_inset
\begin_inset Newline newline
\end_inset
-So inserting space between rows for normal tables is only useful when you
- don't have vertical lines.
+So inserting space between rows for normal tables is only useful when you don't have vertical lines.
\end_layout
\begin_layout Standard
\begin_inset VSpace bigskip
\end_inset
-When you want to add extra height to all cells of all tables, you can do
- this with the following preamble lines:
+When you want to add extra height to all cells of all tables,
+ you can do this with the following preamble lines:
\end_layout
\begin_layout Standard
\series default
will be loaded automatically by \SpecialChar LyX
when you use self defined table formats.
- To avoid that it being loaded twice the command
+ To avoid that it is loaded twice the command
\series bold
\backslash
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Units-available-in"
+nolink "false"
\end_inset
.
- But this has the disadvantage that the cell texts are no longer exactly
- vertically centered.
+ But this has the disadvantage that the cell texts are no longer exactly vertically centered.
\end_layout
\begin_layout Standard
-If you are using font sizes larger than the normal size, the table borders
- are often too close to the letters.
+If you are using font sizes larger than the normal size,
+ the table borders are often too close to the letters.
This can be corrected by inserting the command
\series bold
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Vertical-alignment-of"
+nolink "false"
\end_inset
\noindent
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status collapsed
\begin_inset Text
\begin_layout Plain Layout
-Normal, g
+Normal,
+ g
\end_layout
\end_inset
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status collapsed
\begin_inset Text
\begin_layout Plain Layout
-Normal, g
+Normal,
+ g
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Customization ! Special Cell Alignment
+Table Customization
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Special Cell Alignment
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Sometimes it looks better when the cell entries of a column are aligned
- with a special character, e.
+Sometimes it looks better when the cell entries of a column are aligned with a special character,
+ e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-cells-align"
+nolink "false"
\end_inset
.
- This alignment is achieved by setting the cursor into the column and then
- either pressing the toolbar button
+ This alignment is achieved by setting the cursor into the column and then either pressing the toolbar button
\begin_inset Info
type "icon"
arg "tabular-feature align-decimal"
Separator
\family default
.
- The alignment character can be a character of your choice and is specified
- in the table settings.
+ The alignment character can be a character of your choice and is specified in the table settings.
\end_layout
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_layout
\begin_layout Standard
-For alignments at characters in formulas this method does not work because
- the field to specify the alignment character does not allow formulas.
+For alignments at characters in formulas this method does not work because the field to specify the alignment character does not allow formulas.
In this case one need to use the method from Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-align-operator"
+nolink "false"
\end_inset
.
This table was created with a 4×2 table.
The heading is a centered multicolumn.
- The first column is right-aligned and contains the first part including
- the operator.
+ The first column is right-aligned and contains the first part including the operator.
The second column is left aligned and contains the rest.
- A small space was added at the beginning of each cell of the second column
- to get the space that is usually around operators.
- To omit the space that is normally between two table columns, the following
- \SpecialChar LaTeX
+ A small space was added at the beginning of each cell of the second column to get the space that is usually around operators.
+ To omit the space that is normally between two table columns,
+ the following \SpecialChar LaTeX
-argument was used for the second column:
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Several-table-cell"
+nolink "false"
\end_inset
shows some example alignments.
- For the alignment with the relation sign, a small space was added like
- for the second column of Table
+ For the alignment with the relation sign,
+ a small space was added like for the second column of Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-align-operator"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Customization ! Cell/Column Format
+Table Customization
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Cell/Column Format
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Table-Width-Calculation"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multicolumn-Calculations"
+nolink "false"
\end_inset
is very annoying if you have several tables where a calculation is necessary.
- To make life easier, you can define a cell/column format in the preamble,
+ To make life easier,
+ you can define a cell/column format in the preamble,
that can be used in all tables of the document.
The format is defined with the command
\end_layout
\emph on
b
\emph default
-,
+,
+
\emph on
c
\emph default
-,
+,
+
\emph on
l
\emph default
-,
+,
+
\emph on
m
\emph default
-,
+,
+
\emph on
p
\emph default
\end_layout
\begin_layout Standard
-For vertically and horizontally centered multicolumn cells with a fixed
- width you can define the cell format
+For vertically and horizontally centered multicolumn cells with a fixed width you can define the cell format
\end_layout
\begin_layout Standard
\backslash
hspace{0pt}
\series default
- avoids the problem of hyphenating the first word, as described in section
+ avoids the problem of hyphenating the first word,
+ as described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multiple-Lines-in"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-For cells spanned by a multicolumn cell, you can define the format
+For cells spanned by a multicolumn cell,
+ you can define the format
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand eqref
reference "eq:Wgn"
+nolink "false"
\end_inset
- to calculate the required width so that each spanned cell has the same
- width.
+ to calculate the required width so that each spanned cell has the same width.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-For colored columns, you can define
+For colored columns,
+ you can define
\end_layout
\begin_layout Standard
\begin_inset Quotes erd
\end_inset
- at the end creates a column with a flexible width whose text is horizontally
- centered.
+ at the end creates a column with a flexible width whose text is horizontally centered.
You can now enter
\end_layout
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-using-user-defined"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-for the last column, and
+for the last column,
+ and
\end_layout
\begin_layout Standard
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Customization ! Line Thickness
+Table Customization
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Line Thickness
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The line thickness for all lines in a table can be adjusted with the length
-
+The line thickness for all lines in a table can be adjusted with the length
\series bold
\backslash
\begin_inset space \thinspace{}
\end_inset
-pt, as in Table
+pt,
+ as in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-1.5"
+nolink "false"
\end_inset
-, insert the command
+,
+ insert the command
\end_layout
\begin_layout Standard
in \SpecialChar TeX
Code before the table or table float.
The changed thickness is valid for all subsequent tables.
- To use the default value again, set
+ To use the default value again,
+ set
\series bold
\backslash
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_inset space \thinspace{}
\end_inset
-pt only for horizontal lines, as in Table
+pt only for horizontal lines,
+ as in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-horizontal"
+nolink "false"
\end_inset
-, insert these commands in \SpecialChar TeX
+,
+ insert these commands in \SpecialChar TeX
Code before the table or table float:
\end_layout
\end_layout
\begin_layout Standard
-To return to the default line thickness, insert this command in \SpecialChar TeX
- Code after
- the table or table float:
+To return to the default line thickness,
+ insert this command in \SpecialChar TeX
+ Code after the table or table float:
\end_layout
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_inset space \thinspace{}
\end_inset
-pt only for vertical lines, create the following column format in the document
- preamble, according to the description in section
+pt only for vertical lines,
+ create the following column format in the document preamble,
+ according to the description in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Customized-Format"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-vertical"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_layout Subsection
Dashed Lines
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Customization ! Dashed Lines
+Table Customization
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Dashed Lines
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float table
placement H
+alignment document
wide false
sideways false
status open
\begin_layout Standard
\SpecialChar LyX
- does not natively support dashed lines, so you have to use \SpecialChar TeX
+ does not natively support dashed lines,
+ so you have to use \SpecialChar TeX
Code.
As a prerequisite the \SpecialChar LaTeX
package
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! arydshln
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+arydshln
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To make a vertical line dashed, enter the colon
+To make a vertical line dashed,
+ enter the colon
\begin_inset Quotes eld
\end_inset
\end_inset
together with the character for the horizontal alignment as \SpecialChar LaTeX
- argument in
- the table cell dialog.
+ argument in the table cell dialog.
\end_layout
\begin_layout Standard
\begin_layout Standard
in \SpecialChar TeX
Code as the first element of the first cell in the table row.
- If you have for example a multicolumn spanning columns 2 to 4 and you want
- to have a dashed line above, add the command
+ If you have for example a multicolumn spanning columns 2 to 4 and you want to have a dashed line above,
+ add the command
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Table-with-dashed"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Colored-table-with"
+nolink "false"
\end_inset
status collapsed
\begin_layout Plain Layout
-color horizontal, dashed lines red
+color horizontal,
+ dashed lines red
\end_layout
\end_inset
status collapsed
\begin_layout Plain Layout
-color partial horizontal, dashed lines yellow
+color partial horizontal,
+ dashed lines yellow
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\end_layout
\begin_layout Standard
-The coloring of lines, columns and lines works as decribed in section
+The coloring of lines,
+ columns and lines works as decribed in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Colored-Tables"
+nolink "false"
\end_inset
\backslash
hdashline
\series default
-; so one uses the command
+;
+ so one uses the command
\end_layout
\begin_layout Standard
\backslash
cdashline
\series default
-, the command is
+,
+ the command is
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-To get back the black line color, one needs to insert the following commands
- as \SpecialChar TeX
+To get back the black line color,
+ one needs to insert the following commands as \SpecialChar TeX
Code behind the table:
\end_layout
\color none
Note
\series default
-: If there are multiple commands in a cell, the command of
+:
+ If there are multiple commands in a cell,
+ the command of
\series bold
arydshln
\series default
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Colored-table-with"
+nolink "false"
\end_inset
\series bold
\color none
Note:
+
\series default
The \SpecialChar LaTeX
-package
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! colortbl
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+colortbl
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\series bold
arydshln
\series default
-,
+,
+
\begin_inset CommandInset citation
LatexCommand cite
key "arydshln"
+literal "true"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Introduction
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Introduction
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-A float is a block of text associated with some sort of label, which doesn't
- have a fixed location.
+A float is a block of text associated with some sort of label,
+ which doesn't have a fixed location.
It can
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- forward or backward a page or two, to wherever it fits best.
+ forward or backward a page or two,
+ to wherever it fits best.
\family sans
Footnotes
Notes
\family default
- are also floats because they can float to the next page when there are
- too many notes on the page.
+ are also floats because they can float to the next page when there are too many notes on the page.
\end_layout
\begin_layout Standard
Floats allow a high quality layout.
- Images and tables can be spread evenly among the pages to avoid white space
- and pages without text.
- As the floating often destroys the context between the text and the image/table
-, every float can be referenced in the text.
+ Images and tables can be spread evenly among the pages to avoid white space and pages without text.
+ As the floating often destroys the context between the text and the image/table,
+ every float can be referenced in the text.
Floats are therefore numbered.
Referencing is described in section
\begin_inset space ~
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Referencing-Floats"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-To insert a float, use the menu
+To insert a float,
+ use the menu
\family sans
Insert\SpecialChar menuseparator
Float
\family sans
Caption
\family default
- inset, a box with a label.
- The label will automatically be translated to the document language in
- the output.
+ inset,
+ a box with a label.
+ The label will automatically be translated to the document language in the output.
After the label you can insert the caption text.
- The image or table is inserted above or below the caption in a separate
- paragraph within the float.
+ The image or table is inserted above or below the caption in a separate paragraph within the float.
More about the caption placement is contained in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Caption-Placement"
+nolink "false"
\end_inset
.
To keep your \SpecialChar LyX
- document readable, you can open and close the float box by
- left-clicking on the box label.
- A closed float box looks like this:
+ document readable,
+ you can open and close the float box by left-clicking on the box label.
+ A closed float box looks like this:
+
\begin_inset Graphics
filename clipart/float.png
- scale 70
+ scale 95
scaleBeforeRotation
\end_inset
\end_layout
\begin_layout Standard
-It is recommended that you insert floats as separate standard paragraphs
- to avoid possible \SpecialChar LaTeX
--errors that can occur when the surrounding text is specially
- formatted.
+It is recommended that you insert floats as separate standard paragraphs to avoid possible \SpecialChar LaTeX
+-errors that can occur when the surrounding text is specially formatted.
\end_layout
\begin_layout Standard
-Existing figures or tables can be put into a float by highlighting them
- and then pressing the corresponding toolbar button for a new float.
+Existing figures or tables can be put into a float by highlighting them and then pressing the corresponding toolbar button for a new float.
\end_layout
\begin_layout Section
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Figure-Floats"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Table-Floats"
+nolink "false"
\end_inset
- respectively, \SpecialChar LyX
+ respectively,
+ \SpecialChar LyX
offers the float types
\family sans
Algorithm
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Wrap-Floats"
+nolink "false"
\end_inset
\begin_layout Subsection
Algorithm Floats
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Algorithms
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Algorithms
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float algorithm
placement h
+alignment document
wide false
sideways false
status open
\begin_inset Newline newline
\end_inset
- Sum:= Sum + A(I); /*comment*/
+ Sum := Sum + A(I);
+ /* comment */
\begin_inset Newline newline
\end_inset
Algorithm
\family default
.
- It is used for program codes and descriptions of algorithms and can be
- seen as an alternative to program code listings that are explained in chapter
+ It is used for program codes and descriptions of algorithms and can be seen as an alternative to program code listings that are explained in chapter
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Program-Code-Listings"
+nolink "false"
\end_inset
\SpecialChar LyX
Code
\family default
-, described in \SpecialChar LyX
+,
+ described in \SpecialChar LyX
's
\emph on
Userguide
\begin_inset CommandInset ref
LatexCommand ref
reference "alg:Example-Algorithm-float"
+nolink "false"
\end_inset
\begin_inset space \thinspace{}
\end_inset
-mm vertical space was added at the end of the float to have the bottom rule
- exactly below the last text line.
+mm vertical space was added at the end of the float to have the bottom rule exactly below the last text line.
\end_layout
\begin_layout Standard
The float label is not automatically translated into the document language.
- If your document is not in English, you have to do this manually by adding
- the following line to the document preamble
+ If your document is not in English,
+ you have to do this manually by adding the following line to the document preamble
\series bold
:
\end_layout
\end_inset
as is the case for table and figure floats in many document-classes.
- To number algorithm floats in the same scheme, add this command to your
- document preamble:
+ To number algorithm floats in the same scheme,
+ add this command to your document preamble:
\end_layout
\begin_layout Standard
\backslash
numberwithin
\series default
-, set in the tab
+,
+ set in the tab
\family sans
Math
\begin_inset space ~
\begin_layout Section
Float Numbering
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Numbering
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Numbering
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Floats are usually numbered either independently from the sections the floats
- are in, or in the scheme
+Floats are usually numbered either independently from the sections the floats are in,
+ or in the scheme
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Standard
-To change section-independent numbering, you can use this command in the
- document preamble:
+To change section-independent numbering,
+ you can use this command in the document preamble:
\end_layout
\begin_layout Standard
thetable
\series default
is the command that prints the table number.
- For figure floats, the command would be
+ For figure floats,
+ the command would be
\series bold
\backslash
\begin_inset Quotes erd
\end_inset
-, use this command in the preamble:
+,
+ use this command in the preamble:
\end_layout
\begin_layout Standard
\backslash
numberwithin
\series default
-, set in the tab
+,
+ set in the tab
\family sans
Math
\begin_inset space ~
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Footnote-Numbering"
+nolink "false"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! References
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+References
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-References ! to Floats
+References
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+to Floats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To reference a float, insert a label into its caption using the menu
+To reference a float,
+ insert a label into its caption using the menu
\family sans
Insert\SpecialChar menuseparator
Label
\end_inset
.
- A grey label box like this one:
+ A grey label box like this one:
+
\begin_inset Graphics
filename clipart/label.png
scaleBeforeRotation
will be inserted and the label window pops up asking for the label text.
\SpecialChar LyX
offers as text the first words of the caption with a prefix.
- The prefix depends on the float type, e.
+ The prefix depends on the float type,
+ e.
\begin_inset space \thinspace{}
\end_inset
.
The cross-reference window appears showing all labels of the document.
If you have multiple \SpecialChar LyX
- documents opened, choose the one you are working
- on from the drop-list at the top of the dialog.
+ documents opened,
+ choose the one you are working on from the drop-list at the top of the dialog.
You can now sort the labels alphabetically and then choose one.
- A grey cross-reference box like this one:
+ A grey cross-reference box like this one:
+
\begin_inset Graphics
filename clipart/reference.png
scaleBeforeRotation
\end_inset
will be inserted.
- At the position of the cross-reference box the float number will appear
- in the output.
+ At the position of the cross-reference box the float number will appear in the output.
\end_layout
\begin_layout Standard
-It is recommended that you use a protected space between the cross-reference
- name and its number to avoid line breaks between them.
- If a cross-reference refers to a non-existing label, you will see two question
- marks in the output instead of the reference.
+It is recommended that you use a
+\change_deleted 177693 1654669168
+protected
+\change_inserted 177693 1654669170
+non-breaking
+\change_unchanged
+ space between the cross-reference name and its number to avoid line breaks between them.
+ If a cross-reference refers to a non-existing label,
+ you will see two question marks in the output instead of the reference.
\end_layout
\begin_layout Standard
You can change labels at any time by clicking on the label box.
- References to the changed label will automatically update their links to
- the new label text.
+ References to the changed label will automatically update their links to the new label text.
\end_layout
\begin_layout Standard
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-References ! Formats
+References
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Formats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Description
-<reference>: prints the float number, this is the default:
+<reference>:
+ prints the float number,
+ this is the default:
+
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:Two-distorted-images"
+nolink "false"
\end_inset
\end_layout
\begin_layout Description
-(<reference>): prints the float number within two parentheses, this is the
- style normally used to reference formulas, especially when the reference
- name
+(<reference>):
+ prints the float number within two parentheses,
+ this is the style normally used to reference formulas,
+ especially when the reference name
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- is omitted:
+ is omitted:
+
\begin_inset CommandInset ref
LatexCommand eqref
reference "eq:Wgn"
+nolink "false"
\end_inset
\end_layout
\begin_layout Description
-<page>: prints the page number: Page
+<page>:
+ prints the page number:
+ Page
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand pageref
reference "fig:Two-distorted-images"
+nolink "false"
\end_inset
\begin_inset space ~
\end_inset
-<page>: prints the text "on page" and the page number:
+<page>:
+ prints the text "on page" and the page number:
+
\begin_inset CommandInset ref
LatexCommand vpageref
reference "fig:Two-distorted-images"
+nolink "false"
\end_inset
\begin_inset space ~
\end_inset
-<page>: prints the float number, the text "on page", and the page number:
+<page>:
+ prints the float number,
+ the text "on page",
+ and the page number:
\begin_inset CommandInset ref
LatexCommand vref
reference "fig:Two-distorted-images"
+nolink "false"
\end_inset
\begin_inset space ~
\end_inset
-reference: prints a self-defined cross-reference format.
+reference:
+ prints a self-defined cross-reference format.
\begin_inset Newline newline
\end_inset
\series bold
Note:
+
\series default
This feature is only available when you have the \SpecialChar LaTeX
-package
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! prettyref
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+prettyref
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! refstyle
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+refstyle
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_inset
You can select which \SpecialChar LaTeX
--package should be used for this feature by setting
- the option
+-package should be used for this feature by setting the option
\family sans
Use refstyle (not prettyref) for cross-references
\family default
newref
\series default
(refstyle) to the preamble of the document.
- For example redefining all references to figures (which have the label
- shortcut
+ For example redefining all references to figures (which have the label prefix
\begin_inset Quotes eld
\end_inset
\begin_inset Newline newline
\end_inset
-For more information about the format, have a look at the package documentations
-,
+For more information about the format,
+ have a look at the package documentations,
+
\begin_inset CommandInset citation
LatexCommand cite
key "prettyref,refstyle"
+literal "true"
+
+\end_inset
+
+.
+\begin_inset Newline newline
+\end_inset
+
+The options
+\family sans
+Plural
+\family default
+ and
+\family sans
+Capitalized
+\family default
+ are only available if you use the \SpecialChar LaTeX
+-package
+\series bold
+refstyle
+\series default
+.
+
+\family sans
+Plural
+\family default
+ adds an
+\emph on
+s
+\emph default
+ to the name,
+ e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+figures
+\begin_inset Quotes erd
+\end_inset
+
+;
+
+\family sans
+Capitalized
+\family default
+ outputs the name capitalized,
+ e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+\begin_inset Quotes eld
+\end_inset
+
+Figure
+\begin_inset Quotes erd
+\end_inset
+
+.
+ Both options can be combined to get e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+
+\begin_inset Quotes eld
+\end_inset
+
+Figures
+\begin_inset Quotes erd
\end_inset
.
\begin_inset space ~
\end_inset
-reference: prints the caption of the reference:
+reference:
+ prints the caption of the reference:
+
\begin_inset CommandInset ref
LatexCommand nameref
reference "fig:Two-distorted-images"
+nolink "false"
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Description
+Label
+\begin_inset space ~
+\end_inset
+
+only:
+ prints only the \SpecialChar LaTeX
+ label for the reference:
+
+\begin_inset CommandInset ref
+LatexCommand labelonly
+reference "fig:Two-distorted-images"
+plural "false"
+caps "false"
+noprefix "false"
+nolink "false"
+
+\end_inset
+
+
+\begin_inset Newline newline
+\end_inset
+
+This allows to use the label for commands in \SpecialChar TeX
+ code.
+ With the option
+\family sans
+No Prefix
+\family default
+ one can omit the prefix of the label name:
+
+\begin_inset CommandInset ref
+LatexCommand labelonly
+reference "fig:Two-distorted-images"
+plural "false"
+caps "false"
+noprefix "true"
+nolink "false"
\end_inset
\family sans
<page>
\family default
- will not print the page number if the label is on the previous, the same,
+ will not print the page number if the label is on the previous,
+ the same,
or the next page.
You will e.
\begin_inset space \thinspace{}
\end_layout
\begin_layout Standard
-The number and current page of the part of the document referred to in the
- output is automatically calculated by \SpecialChar LaTeX
+The number and current page of the part of the document referred to in the output is automatically calculated by \SpecialChar LaTeX
.
The varieties are adjusted in the field
\family sans
Format
\family default
- of the cross-reference window that appears when you click on the cross-referenc
-e box.
+ of the cross-reference window that appears when you click on the cross-reference box.
\end_layout
\begin_layout Standard
\series bold
Note:
+
\series default
It is recommended to use the \SpecialChar LaTeX
-package
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! refstyle
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+refstyle
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! prettyref
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+prettyref
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Subsection
Automatic Reference Naming
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-References ! Automatic Reference Naming
+References
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Automatic Reference Naming
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! hyperref
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+hyperref
\end_layout
\end_inset
-, that is enabled in the
+
+\end_layout
+
+\end_inset
+
+,
+ that is enabled in the
\family sans
PDF Properties
\family default
\family sans
Document Settings
\family default
- dialog, provides a very useful feature that cross-references automatically
- include the name of the referenced floats (or text parts like
+ dialog,
+ provides a very useful feature that cross-references automatically include the name of the referenced floats (or text parts like
\emph on
section
\emph default
\end_inset
before every reference to a figure.
- To use this feature, enable
+ To use this feature,
+ enable
\series bold
hyperref
\series default
\end_layout
\begin_layout Standard
-When you prefer other reference names than the default ones, for example
- you want instead of
+When you prefer other reference names than the default ones,
+ for example you want instead of
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes eld
\end_inset
-, you can redefine the name by inserting this in the preamble:
+,
+ you can redefine the name by inserting this in the preamble:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-When you are using another document language than English, replace
+When you are using another document language than English,
+ replace
\begin_inset Newline newline
\end_inset
\backslash
extras***
\series default
-, where *** is the name of the language used.
+,
+ where *** is the name of the language used.
\end_layout
\begin_layout Standard
-To get automatic names, but not for certain reference types, for example
- not for equations, use this preamble code:
+To get automatic names,
+ but not for certain reference types,
+ for example not for equations,
+ use this preamble code:
\end_layout
\begin_layout Standard
\begin_inset CommandInset citation
LatexCommand cite
key "hyperref"
+literal "true"
\end_inset
\series bold
Note:
+
\series default
- Automatic reference naming cannot be used when you use cross-references
- in the
+ Automatic reference naming cannot be used when you use cross-references in the
\family sans
Formatted
\begin_inset space ~
reference
\family default
- style, as described in section
+ style,
+ as described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Cross-Reference-Formats"
+nolink "false"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-References ! Reference Position
+References
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Reference Position
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! hyperref
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+hyperref
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\family sans
Document Settings
\family default
- dialog to link cross-references in the output, you will see that clicking
- on an image float reference jumps to the image label.
- The caption will be the first text part on the screen, so that you cannot
- see the image without scrolling.
- This is because the reference link anchor is placed at the position of
- the label.
+ dialog to link cross-references in the output,
+ you will see that clicking on an image float reference jumps to the image label.
+ The caption will be the first text part on the screen,
+ so that you cannot see the image without scrolling.
+ This is because the reference link anchor is placed at the position of the label.
With the use of the package
\series bold
hypcap
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! hypcap
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+hypcap
\end_layout
\end_inset
-, which is part of the \SpecialChar LaTeX
+
+\end_layout
+
+\end_inset
+
+,
+ which is part of the \SpecialChar LaTeX
-package
\series bold
oberdiek
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! oberdiek
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+oberdiek
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
-, the link anchor is placed at the beginning of a float.
- To use this feature for figure floats, load
+,
+ the link anchor is placed at the beginning of a float.
+ To use this feature for figure floats,
+ load
\series bold
hypcap
\series default
hypcap
\series default
for all float types but this is not recommended for stability reasons.
- For more information, have a look at
+ For more information,
+ have a look at
\series bold
hypcap
\series default
\begin_inset CommandInset citation
LatexCommand cite
key "hypcap"
+literal "true"
\end_inset
\series bold
Note:
+
\series default
\series bold
\end_layout
\begin_layout Section
-Float Placement
+Float
+\change_deleted -712698321 1526031763
+Placement
+\change_inserted -712698321 1526031765
+Settings
+\change_unchanged
+
\begin_inset CommandInset label
LatexCommand label
-name "sec:Float-Placement"
+name "sec:Float-Settings"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Placement
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+
+\change_deleted -712698321 1526031841
+Placement
+\change_inserted -712698321 1526031842
+Settings
+\change_unchanged
+
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Right-clicking on a float-box and clicking on
+
+\change_inserted -712698321 1526033385
+Float Settings can be adjusted at two places in \SpecialChar LyX
+:
+
+\change_inserted 630872221 1622709604
+i
+\change_deleted 630872221 1622709603
+I
+\change_inserted -712698321 1526033385
+n
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar ldots
+\SpecialChar menuseparator
+Float Settings
+\family default
+,
+ you can set some options that are used by default for all floats of the document (placement on page and alignment of contents),
+ unless you modify the local settings of a float.
+\change_unchanged
+
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1526032513
+The latter can be done by
+\change_deleted -712698321 1526032513
+R
+\change_inserted -712698321 1526032513
+r
+\change_unchanged
+ight-clicking on a float-box and clicking on
\family sans
Settings
+\change_inserted -712698321 1526033387
+\SpecialChar ldots
+
+\change_unchanged
+
\family default
- opens a dialog where you can alter the placement options that \SpecialChar LaTeX
- uses for
- positioning the float.
+
+\change_inserted -712698321 1526032520
+This
+\change_unchanged
+opens a dialog where you can
+\change_inserted -712698321 1526032584
+,
+ now only for the given float,
+
+\change_unchanged
+ alter the
+\change_inserted -712698321 1526033452
+global
+\change_unchanged
+placement
+\change_deleted -712698321 1526033439
+options that \SpecialChar LaTeX
+ uses for positioning the float
+\change_inserted -712698321 1526033493
+ and alignment options,
+ and adapt some other options that are only available for single floats
+\change_unchanged
+.
+
+\change_inserted -712698321 1526032658
+ All these options,
+ both for
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Float Settings
+\family default
+ and for local
+\family sans
+Float Settings
+\family default
+,
+ are described in turn.
+\change_deleted -712698321 1526031652
+
\begin_inset Newline newline
\end_inset
columns
\family default
- is only useful for two-column documents: If you select it, the float will
- span both columns on the page instead of being confined to just one.
+ is only useful for two-column documents:
+ If you select it,
+ the float will span both columns on the page instead of being confined to just one.
\begin_inset Newline newline
\end_inset
sideways
\family default
- is used to rotate floats, see section
+ is used to rotate floats,
+ see section
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Rotated-Floats"
+nolink "false"
\end_inset
.
+\change_unchanged
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1526031775
+Float Placement
+\begin_inset CommandInset label
+LatexCommand label
+name "sec:Float-Placement"
+
+\end_inset
+
+
+\begin_inset Index idx
+range none
+pageformat default
+status collapsed
+
+\begin_layout Plain Layout
+
+\change_inserted -712698321 1526031775
+Floats
+\change_unchanged
+
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+
+\change_inserted -712698321 1526031775
+Placement
+\change_unchanged
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\change_unchanged
+
\end_layout
\begin_layout Standard
-You can use one or more of the following options in the float dialog to
- set the placement for a particular float when you uncheck the option
+
+\change_inserted -712698321 1526032697
+Both in
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Float Settings
+\family default
+ and in the local
+\family sans
+Float Settings
+\family default
+ dialog,
+ you can
+\change_deleted -712698321 1526032811
+You can use one or more of the following options in the float dialog to set
+\change_inserted -712698321 1526032812
+modify
+\change_unchanged
+ the placement
+\change_inserted -712698321 1526033558
+algorithm that \SpecialChar LaTeX
+ uses for positioning floats on the page,
+ either
+\change_unchanged
+for
+\change_inserted -712698321 1526033535
+all floats (
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Float Settings
+\family default
+) or
+\change_unchanged
+a particular float
+\change_inserted -712698321 1526033570
+ (local
+\family sans
+Float Settings
+\family default
+ dialog).
+ This is done via
+\family sans
+Placement Settings
+\family default
+.
+ By default,
+ this is set to
+\change_unchanged
+
+\change_inserted -712698321 1526033604
+
+\family sans
+Class Default
+\family default
+ in
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Float Settings
+\family default
+ (meaning that the default placement algorithm of the document class is used) or
+\family sans
+Document Default
+\family default
+ in the local
+\family sans
+Float Settings
+\family default
+ dialog (meaning that the settings in
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Float Settings
+\family default
+ are used,
+ which are the Class Defaults by default).
+ If you want to change this,
+
+\change_deleted -712698321 1526033009
+when you uncheck
+\change_inserted -712698321 1526033535
+select
+\change_unchanged
+
+\change_deleted -712698321 1526031920
+the option
+\change_inserted -712698321 1526033535
+
+\family sans
+Placement Settings:
+
+\change_unchanged
+
+\family default
+
+\change_inserted -712698321 1526033535
+
\family sans
+Custom.
+\change_deleted -712698321 1526031908
Use
\begin_inset space ~
\end_inset
\end_inset
placement
+\change_inserted -712698321 1526033535
+
\family default
+ This allows you to select one or more from
+\change_unchanged
:
\end_layout
\end_inset
possible try to place the float on the position where it has been inserted
+\change_inserted 630872221 1622713522
+
+\end_layout
+
+\begin_layout Description
+
+\change_inserted 630872221 1622713704
+Here,
+\begin_inset space ~
+\end_inset
+
+definitely forces the placement of the float on the position where it has been inserted
+\change_unchanged
+
\end_layout
\begin_layout Description
\emph default
used by \SpecialChar LaTeX
.
- That means, if you use the default placement, \SpecialChar LaTeX
+ That means,
+ if you use the default placement,
+ \SpecialChar LaTeX
will first try out
\family sans
Here
possible
\family default
-, then
+,
+ then
\family sans
Top
\begin_inset space ~
page
\family default
-, and then the others.
- If you do not use the default, \SpecialChar LaTeX
- will try only the checked options but in
- the same order.
+,
+ and then the others.
+ If you do not use the default,
+ \SpecialChar LaTeX
+ will try only the checked options but in the same order.
If none of the 4
\begin_inset space ~
\end_inset
-placements is possible the procedure is internally repeated trying to put
- the float on the following page.
+placements is possible the procedure is internally repeated trying to put the float on the following page.
\end_layout
\begin_layout Standard
-By default, each option has its own rules:
+By default,
+ each option has its own rules:
\end_layout
\begin_layout Labeling
page
\family default
-: only floats occupying less than 30
+:
+ only floats occupying less than 30
\begin_inset space \thinspace{}
\end_inset
floats
\family default
-: only if more than 50
+:
+ only if more than 50
\begin_inset space \thinspace{}
\end_inset
-% of the page is occupied by floats, several floats can be set together
- on a page.
+% of the page is occupied by floats,
+ several floats can be set together on a page.
(
\series bold
\end_layout
\begin_layout Standard
-If you don't like these rules, you can ignore them by using the additional
- option
+If you don't like these rules,
+ you can ignore them by using the additional option
\family sans
Ignore
\begin_inset space ~
\end_inset
You can also redefine the rules with \SpecialChar LaTeX
--commands that are given in parentheses
- after the rules description above.
- To increase for example the often too small default of the bottom-rule
- to 50
+-commands that are given in parentheses after the rules description above.
+ To increase for example the often too small default of the bottom-rule to 50
\begin_inset space \thinspace{}
\end_inset
-% of the page, add this line to your document preamble:
+% of the page,
+ add this line to your document preamble:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-Sometimes you might need, under all circumstances, a float to be placed
- exactly at the position where it is inserted.
+Sometimes you might need,
+ under all circumstances,
+ a float to be placed exactly at the position where it is inserted.
For this case you can use the option
\family sans
Here
definitely
\family default
.
- Use this option very rarely and only if the document is almost ready to
- be printed, because the float is then no longer able to
+ Use this option very rarely and only if the document is almost ready to be printed,
+ because the float is then no longer able to
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Standard
-There are no placement options for text wrap floats, because they are always
- surrounded by the text of a certain paragraph.
+There are no placement options for text wrap floats,
+ because they are always surrounded by the text of a certain paragraph.
\begin_inset VSpace bigskip
\end_inset
\end_layout
\begin_layout Standard
-Sometimes you have the problem that a float is placed at the top of a page
- while its corresponding section starts at the middle of the page, so that
- the reader could think the float is part of the previous section.
+Sometimes you have the problem that a float is placed at the top of a page while its corresponding section starts at the middle of the page,
+ so that the reader could think the float is part of the previous section.
To avoid this the \SpecialChar LaTeX
-command
\series bold
suppressfloats
\series default
can be used.
- It suppresses a given float placement for the page where it is inserted
- and can therefore be used to avoid floats being set before a section starts.
- To get this, add these commands to your document preamble:
+ It suppresses a given float placement for the page where it is inserted and can therefore be used to avoid floats being set before a section starts.
+ To get this,
+ add these commands to your document preamble:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-You can define the same for all section headings, like chapters and subsections.
- This definition is not recommended to be used for small text parts like
- subsubsections because \SpecialChar LaTeX
+You can define the same for all section headings,
+ like chapters and subsections.
+ This definition is not recommended to be used for small text parts like subsubsections because \SpecialChar LaTeX
may then have problems finding a suitable placement.
\end_layout
\begin_inset VSpace bigskip
\end_inset
-In some cases it is required to have all figures/tables at the end of the
- document.
+In some cases it is required to have all figures/tables at the end of the document.
For this purpose the \SpecialChar LaTeX
-package
\series bold
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! endfloat
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+endfloat
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
was developed.
- It puts all figure and table floats at the end of the document into their
- own sections.
+ It puts all figure and table floats at the end of the document into their own sections.
At the original float position a text hint like
\begin_inset Quotes eld
\end_inset
\begin_inset CommandInset citation
LatexCommand cite
key "endfloat"
+literal "true"
\end_inset
\begin_layout Plain Layout
\series bold
-Note: endfloat
+Note:
+ endfloat
\series default
- doesn't provide an automatic translation for the text hint, you have to
- do this manually, see section
+ doesn't provide an automatic translation for the text hint,
+ you have to do this manually,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset citation
LatexCommand cite
key "endfloat"
+literal "true"
\end_inset
\series bold
Note:
+
\series default
There is currently a bug in
\series bold
\begin_inset VSpace bigskip
\end_inset
-For more details about float placements, have a look at \SpecialChar LaTeX
- books,
+For more details about float placements,
+ have a look at \SpecialChar LaTeX
+ books,
+
\begin_inset CommandInset citation
LatexCommand cite
key "latexcompanion,latexguide,latexbook"
+literal "true"
\end_inset
.
+\change_inserted -712698321 1526030561
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1526031989
+Alignment of Float Contents
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1526032316
+In this list of options,
+ you can define how the contents of a float (or all floats by default,
+ if selected from
+\family sans
+Document\SpecialChar menuseparator
+Settings
+\family default
+) are aligned.
+
+\family sans
+Class Default
+\family default
+ means that the alignment of the class,
+ or the default alignment of \SpecialChar LaTeX
+,
+ is used.
+
+\family sans
+Document Default
+\family default
+ (only visible in the
+\family sans
+Float Settings
+\family default
+ dialog,
+ not in
+\family sans
+Document\SpecialChar menuseparator
+Settings
+\family default
+) takes the setting specified in
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Float Settings
+\family default
+.
+ The other three options,
+
+\family sans
+Left
+\family default
+,
+
+\family sans
+Center
+\family default
+,
+ or
+\family sans
+Right
+\family default
+,
+ are self-explanatory.
+ If one of these is selected in
+\family sans
+Document\SpecialChar menuseparator
+Settings\SpecialChar menuseparator
+Float Settings
+\family default
+,
+ all floats of the document will have this setting by default (so it is fairly easy,
+ for instance,
+ to center all floats).
+\change_unchanged
+
+\end_layout
+
+\begin_layout Subsection
+
+\change_inserted -712698321 1526030571
+Other Float Options
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1526035716
+These two options are only visible in the local
+\family sans
+Float Settings
+\family default
+ dialog,
+ not in
+\family sans
+Document\SpecialChar menuseparator
+Settings.
+\change_unchanged
+
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1526033931
+The option
+\family sans
+Span
+\begin_inset space ~
+\end_inset
+
+columns
+\family default
+ is useful for two-column documents:
+ If you select it,
+ the float will span both columns on the page instead of being confined to just one.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1526030572
+The option
+\family sans
+Rotate
+\begin_inset space ~
+\end_inset
+
+sideways
+\family default
+ is used to rotate floats,
+ see section
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Rotated-Floats"
+nolink "false"
+
+\end_inset
+
+.
+\change_unchanged
+
\end_layout
\begin_layout Section
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Rotating
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Rotating
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
Especially for wide tables you might have floats rotated.
- To rotate a whole float including the caption, right-click on the float-box
- and use the option
+ To rotate a whole float including the caption,
+ right-click on the float-box and use the option
\family sans
Rotate
\begin_inset space ~
\end_layout
\begin_layout Standard
-Rotated floats are always placed on a page of their own (or column of their
- own; in case you have a multi-column document).
+Rotated floats are always placed on a page of their own (or column of their own;
+ in case you have a multi-column document).
You can let them span several columns using the float settings option
\family sans
Span
\family default
.
Floats are rotated so that you can read them from the outside margin.
- To force a certain rotation direction for all pages, you can add either
- the option
+ To force a certain rotation direction for all pages,
+ you can add either the option
\series bold
figuresleft
\series default
\end_layout
\begin_layout Standard
-Referencing rotated floats is the same as for normal floats, the caption
- format is also the same: Table
+Referencing rotated floats is the same as for normal floats,
+ the caption format is also the same:
+ Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Rotated-table"
+nolink "false"
\end_inset
\series bold
Note:
+
\series default
Not all DVI-viewers are able to display rotated floats.
\end_layout
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways true
status open
\begin_layout Section
Subfloats
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Subfloats
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Subfloats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
Subfloats are for example used when a figure consists of several images.
They are created by inserting a float into an existing float.
- The placement of the subfloats can be controlled in the same way as for
- paragraphs as shown in table
+ The placement of the subfloats can be controlled in the same way as for paragraphs as shown in table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Two-subtables-side"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Two-subtables-upon"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-Referencing subfloats works as for normal floats: Table
+Referencing subfloats works as for normal floats:
+ Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:This-is-subtable-a"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:This-is-subtable-b"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Two-subtables-side"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status collapsed
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status collapsed
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\end_inset
Two subtables placed one above the other.
- (a) table with 4 cells, (b) table with 5 cells.
+ (a) table with 4 cells,
+ (b) table with 5 cells.
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status collapsed
\begin_layout Plain Layout
\align center
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status collapsed
\begin_layout Section
Floats Side by Side
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Side by side
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Side by side
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To place floats side by side, as in Figures
+To place floats side by side,
+ as in Figures
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:Float-left"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:Float-right"
+nolink "false"
\end_inset
-, only
+,
+ only
\emph on
one
\emph default
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Minipages"
+nolink "false"
\end_inset
Bottom
\family default
for each minipage.
- The minipage boxes contain the image and the caption in the same way as
- they are in a float.
+ The minipage boxes contain the image and the caption in the same way as they are in a float.
The only difference is that the image unit
\family sans
Column
\begin_layout Standard
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status open
\begin_layout Plain Layout
\align center
\begin_inset Graphics
- filename clipart/mobius.eps
- lyxscale 50
+ filename clipart/2D-intensity-plot.pdf
width 100col%
scaleBeforeRotation
\begin_layout Plain Layout
\align center
\begin_inset Graphics
- filename clipart/platypus.eps
- lyxscale 50
+ filename clipart/Star-structure.pdf
width 100col%
scaleBeforeRotation
\family sans
Variable-width Minipages
\family default
-, see sec.
+,
+ see sec.
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Minipages"
+nolink "false"
\end_inset
.
- Variable-width minipages adapt automatically to the width of the figures
- and tables.
- They do not require an explicit width to be given, and they improve the
- horizontal alignment of the figures.
+ Variable-width minipages adapt automatically to the width of the figures and tables.
+ They do not require an explicit width to be given,
+ and they improve the horizontal alignment of the figures.
The LyX example file
\emph on
varwidth-floats-side-by-side
\begin_layout Section
Caption Formatting
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Caption ! Formatting
+Caption
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Formatting
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Caption Formatting
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Caption Formatting
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\family default
.
On the \SpecialChar LyX
- screen captions appear as a label, e.
+ screen captions appear as a label,
+ e.
\begin_inset space \thinspace{}
\end_inset
\end_inset
is the actual reference number.
- By default the label and the number are in the same font as the caption
- text and a colon follows the number to divide the label from the text.
+ By default the label and the number are in the same font as the caption text and a colon follows the number to divide the label from the text.
This caption format is suitable for many but not all documents.
\end_layout
\begin_layout Standard
-To change the default caption format, load the \SpecialChar LaTeX
+To change the default caption format,
+ load the \SpecialChar LaTeX
-package
\series bold
caption
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! caption
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+caption
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To have for example the label and the number in sans-serif, bold font and
- the table captions always above the table as in this document, use the
- following command:
+To have for example the label and the number in sans-serif,
+ bold font and the table captions always above the table as in this document,
+ use the following command:
\end_layout
\begin_layout Standard
\series bold
\backslash
-usepackage[labelfont={bf,sf}, tableposition=top]{caption}
+usepackage[labelfont={bf,sf},
+ tableposition=top]{caption}
\end_layout
\begin_layout Standard
\series bold
caption
\series default
- package without format specific options and define the different formats
- with the help of the command
+ package without format specific options and define the different formats with the help of the command
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:This-is-an-fig"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:This-is-an-tab"
+nolink "false"
\end_inset
\series bold
\backslash
-captionsetup[figure]{labelfont={tt}, textfont=it, indention=1cm,%
+captionsetup[figure]{labelfont={tt},
+ textfont=it,
+ indention=1cm,%
\begin_inset Newline newline
\end_inset
\series bold
Note:
+
\series default
The option
\series bold
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! KOMA-Script
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+KOMA-Script
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset citation
LatexCommand cite
key "caption"
+literal "true"
\end_inset
\begin_inset Quotes erd
\end_inset
- creates a protected space.
+ creates a
+\change_deleted 177693 1654669177
+protected
+\change_inserted 177693 1654669179
+non-breaking
+\change_unchanged
+ space.
\end_layout
\begin_layout Standard
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! KOMA-Script
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+KOMA-Script
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\family sans
article (KOMA-Script)
\family default
-,
+,
+
\family sans
book (KOMA-Script)
\family default
-,
+,
+
\family sans
letter (KOMA-Script)
\family default
-, or
+,
+ or
\family sans
report (KOMA-Script)
\family default
\begin_inset space \thinspace{}
\end_inset
-), you can alternatively to the
+),
+ you can alternatively to the
\series bold
caption
\series default
setkomafont
\series default
.
- For example, to have the caption label in bold, add this command to your
- document preamble:
+ For example,
+ to have the caption label in bold,
+ add this command to your document preamble:
\end_layout
\begin_layout Standard
\begin_inset CommandInset citation
LatexCommand cite
key "KOMA-Script"
+literal "true"
\end_inset
\backslash
-captionsetup[figure]{labelfont={tt}, textfont=it, indention=1cm, labelsep=period
-}
+captionsetup[figure]{labelfont={tt},
+ textfont=it,
+ indention=1cm,
+ labelsep=period}
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float figure
placement !p
+alignment document
wide false
sideways false
status open
\begin_layout Plain Layout
\align center
\begin_inset Graphics
- filename clipart/mobius.eps
- lyxscale 50
- scale 50
+ filename clipart/2D-intensity-plot.pdf
scaleBeforeRotation
\end_inset
\end_inset
-This is an example figure caption that is longer than one line to show the
- different caption format.
+This is an example figure caption that is longer than one line to show the different caption format.
Here a self-defined caption format is used.
\end_layout
\backslash
-captionsetup[figure]{labelfont={bf,sf}, textfont=rm, indention=0cm, labelsep=col
-on}
+captionsetup[figure]{labelfont={bf,sf},
+ textfont=rm,
+ indention=0cm,
+ labelsep=colon}
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float table
placement !p
+alignment document
wide false
sideways false
status open
\end_inset
-This is an example table caption that is longer than one line to show the
- different caption format.
+This is an example table caption that is longer than one line to show the different caption format.
Here the standard caption format for tables in this document is used.
\end_layout
\begin_layout Section
Caption Placement
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Caption ! Placement
+Caption
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Placement
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Caption Placement
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Caption Placement
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Description
-Figure: Caption is set below the figure
+Figure:
+ Caption is set below the figure
\end_layout
\begin_layout Description
-Table: Caption is set above the table
+Table:
+ Caption is set above the table
\end_layout
\begin_layout Standard
Having the caption above the table is unfortunately not supported in \SpecialChar LaTeX
-'s
- standard classes.
+'s standard classes.
That means if you are using the document classes
\family sans
article
\family default
-,
+,
+
\family sans
book
\family default
-,
+,
+
\family sans
letter
\family default
-, or
+,
+ or
\family sans
report
\family default
there will be no space between the caption and the table.
- To insert the necessary space, load the \SpecialChar LaTeX
+ To insert the necessary space,
+ load the \SpecialChar LaTeX
-package
\series bold
caption
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! caption
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+caption
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Caption-Formatting"
+nolink "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! KOMA-Script
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+KOMA-Script
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\family sans
article (KOMA-Script)
\family default
-,
+,
+
\family sans
book (KOMA-Script)
\family default
-,
+,
+
\family sans
letter (KOMA-Script)
\family default
-, or
+,
+ or
\family sans
report (KOMA-Script)
\family default
\begin_inset space \thinspace{}
\end_inset
-), you can alternatively to the
+),
+ you can alternatively to the
\series bold
caption
\series default
\end_layout
\begin_layout Standard
-In documents with a KOMA-Script document class you can also right-click
- on a caption and mark in the context menu if this should be a caption above
- or below the table/figure.
- This way you can override the document-wide caption placement for certain
- captions.
+In documents with a KOMA-Script document class you can also right-click on a caption and mark in the context menu if this should be a caption above or below the table/figure.
+ This way you can override the document-wide caption placement for certain captions.
Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:A-caption-marked"
+nolink "false"
\end_inset
- is an example where the caption is marked a being below the table while
- it is above.
+ is an example where the caption is marked a being below the table while it is above.
For comparison the caption in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:A-standard-table"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! sidecap
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+sidecap
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-If you set no option, the caption is placed on the side of the outer page
- margin – to the right on odd pages, to the left on even pages.
+If you set no option,
+ the caption is placed on the side of the outer page margin – to the right on odd pages,
+ to the left on even pages.
You can change the placement to inner margin with the option
\series bold
innercaption
\series default
.
- To force the placement always to the right or left, use the option
+ To force the placement always to the right or left,
+ use the option
\series bold
rightcaption
\series default
\series bold
leftcaption
\series default
-, respectively.
+,
+ respectively.
\end_layout
\begin_layout Standard
\begin_layout Standard
To place in \SpecialChar LyX
- the caption of a float on the side, it is necessary to add
- these commands to the document preamble:
+ the caption of a float on the side,
+ it is necessary to add these commands to the document preamble:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-The commands allow you to redefine the floats so that the caption is set
- on the side.
+The commands allow you to redefine the floats so that the caption is set on the side.
For figure floats use the command
\end_layout
\begin_layout Standard
in \SpecialChar TeX
- Code at the point where you want to get back to the original float definitio
-n.
+ Code at the point where you want to get back to the original float definition.
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:cap-beside-fig"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:cap-beside-tab"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-You can see in the examples that the caption text appears at the top of
- the floats for table floats and at the bottom for figure floats.
- To change this, you can use the command
+You can see in the examples that the caption text appears at the top of the floats for table floats and at the bottom for figure floats.
+ To change this,
+ you can use the command
\end_layout
\begin_layout Standard
\family sans
table
\family default
-, the placement can be
+,
+ the placement can be
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- for top,
+ for top,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- for center, or
+ for center,
+ or
\begin_inset Quotes eld
\end_inset
\end_inset
for bottom.
- To have for example the caption of figure floats vertically centered, use
- the command
+ To have for example the caption of figure floats vertically centered,
+ use the command
\end_layout
\begin_layout Standard
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:cap-beside-fig-2"
+nolink "false"
\end_inset
\begin_layout Standard
The default caption width is the width of the image/table.
- For thin image/tables, like in Table
+ For thin image/tables,
+ like in Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:cap-beside-tab"
+nolink "false"
\end_inset
-, this leads to captions that are too thin.
- You can increase the width by specifying a factor that will be multiplied
- with the image/table width to get the caption width.
- The caption width will automatically be recalculated in case it would protrude
- over the page or column margin due to the specified width.
+,
+ this leads to captions that are too thin.
+ You can increase the width by specifying a factor that will be multiplied with the image/table width to get the caption width.
+ The caption width will automatically be recalculated in case it would protrude over the page or column margin due to the specified width.
The
\emph on
factor
1.0
\series default
with another value.
- If you do the latter, your factor will be the default if
+ If you do the latter,
+ your factor will be the default if
\series bold
\backslash
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:cap-beside-tab-wider"
+nolink "false"
\end_inset
\series bold
Note:
+
\series default
- For floats with captions set beside, you cannot use the float placement
- option
+ For floats with captions set beside,
+ you cannot use the float placement option
\family sans
Here
\begin_inset space ~
\begin_inset CommandInset citation
LatexCommand cite
key "sidecap"
+literal "true"
\end_inset
\series bold
Note:
+
\series default
The \SpecialChar LaTeX
-package
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! hypcap
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+hypcap
\end_layout
\end_inset
-, described in section
+
+\end_layout
+
+\end_inset
+
+,
+ described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Reference-Position"
+nolink "false"
\end_inset
-, has no effect on floats with the caption set beside.
+,
+ has no effect on floats with the caption set beside.
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status open
\begin_layout Plain Layout
\begin_inset Graphics
- filename clipart/escher-lsd.eps
- scale 75
+ filename clipart/3D-structure-distort.pdf
+ scale 50
scaleBeforeRotation
\end_inset
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status open
\begin_layout Plain Layout
\begin_inset Graphics
- filename clipart/escher-lsd.eps
- scale 75
+ filename clipart/3D-structure-distort.pdf
+ scale 50
scaleBeforeRotation
\end_inset
\begin_layout Standard
\begin_inset Float table
+placement document
+alignment document
wide false
sideways false
status open
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:cap-beside-tab"
+nolink "false"
\end_inset
\begin_layout Section
Listings of Floats
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Float Lists
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Float Lists
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Similar to the table of contents where the sections of the document are
- listed, there are listings for all float types, like the figures of the
- documents.
+Similar to the table of contents where the sections of the document are listed,
+ there are listings for all float types,
+ like the figures of the documents.
You can insert them via the
\family sans
Insert\SpecialChar menuseparator
\end_layout
\begin_layout Standard
-The list entries are the float captions or its short title, the float number,
+The list entries are the float captions or its short title,
+ the float number,
and the page number where they appear in the document.
\end_layout
\SpecialChar LyX
Notes
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Notes ! \SpecialChar LyX
+Notes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+\SpecialChar LyX
Notes
\end_layout
\end_inset
+\end_layout
+
+\end_inset
+
+
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
The greyed out note is here redefined to show it with the original \SpecialChar LyX
- definition
- because greyed out notes are redefined in the preamble of this document,
- as described below, to have blue text.
+ definition because greyed out notes are redefined in the preamble of this document,
+ as described below,
+ to have blue text.
\end_layout
\end_inset
\begin_inset Newline newline
\end_inset
-As you can see in the example, the first line of greyed out notes is a bit
- indented and greyed out notes can have footnotes.
+As you can see in the example,
+ the first line of greyed out notes is a bit indented and greyed out notes can have footnotes.
\end_layout
\begin_layout Standard
arg "note-insert"
\end_inset
- to insert notes, a
+ to insert notes,
+ a
\family sans
\SpecialChar LyX
\family roman
\series medium
\bar no
-If you want to turn existing text into a note, mark it and click on the
- note
+If you want to turn existing text into a note,
+ mark it and click on the note
\family default
\series default
\bar default
\series default
\bar default
.
- To change a note to text, press the backspace key when the cursor is in
- the first position of a note, or press the delete key when the cursor is
- in the very last position of the note, respectively.
+ To change a note to text,
+ press the backspace key when the cursor is in the first position of a note,
+ or press the delete key when the cursor is in the very last position of the note,
+ respectively.
\end_layout
\begin_layout Standard
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Notes ! Footnotes
+Notes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Footnotes
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
Footnote
\family default
.
- You will then see the following footnote-box:
+ You will then see the following footnote-box:
+
\begin_inset Graphics
filename clipart/footnote.png
- scale 80
+ scale 95
scaleBeforeRotation
\end_inset
\series medium
\bar no
where you can enter the footnote text.
- If you want to turn existing text into a footnote, mark it and click on
- the footnote
+ If you want to turn existing text into a footnote,
+ mark it and click on the footnote
\family default
\series default
\bar default
\family default
\series default
\bar default
- to text, press the
+ to text,
+ press the
\family sans
Backspace
\family default
\family default
\series default
\bar default
-, or press the
+,
+ or press the
\family sans
Delete
\family default
\family default
\series default
\bar default
-, respectively.
+,
+ respectively.
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-The footnote will appear in the output as a superscript number at the text
- position where the footnote box is placed.
+The footnote will appear in the output as a superscript number at the text position where the footnote box is placed.
The footnote text is placed at the bottom of the current page.
The footnote number is calculated by \SpecialChar LaTeX
-; the numbers are consecutive.
- Whether the footnote number is reset for every chapter depends on your
- document class.
+;
+ the numbers are consecutive.
+ Whether the footnote number is reset for every chapter depends on your document class.
\end_layout
\begin_layout Standard
-Footnotes can be referenced like floats: Insert a label into the footnote
- and cross-reference this label in the text as described in section
+Footnotes can be referenced like floats:
+ Insert a label into the footnote and cross-reference this label in the text as described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Referencing-Floats"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "foot:This-is-an"
+nolink "false"
\end_inset
\begin_inset VSpace defskip
\end_inset
-Footnotes in title environments are usually not numbered with symbols and
- they cannot contain several paragraphs.
+Footnotes in title environments are usually not numbered with symbols and they cannot contain several paragraphs.
See for example the footnote in the titling of this document.
\end_layout
\begin_layout Standard
-\begin_inset VSpace defskip
+Footnotes in multi-page tables are described in section
+\begin_inset space ~
\end_inset
-Footnotes in tables are not printed by \SpecialChar LaTeX
- due to technical reasons.
- However there exists another method to print them: Instead of the footnote
- the command
-\series bold
-\backslash
-footnotemark{}
-\series default
- is inserted as \SpecialChar TeX
- code.
- The text of the footnote is entered as an argument of the \SpecialChar TeX
- code command
-
-\series bold
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "subsec:Footnotes-in-Multi-page"
+nolink "false"
-\backslash
-footnotetext
-\series default
- after the table.
-\begin_inset Newline newline
\end_inset
-This was done for the following table with the command
+.
\end_layout
\begin_layout Standard
+\begin_inset VSpace defskip
+\end_inset
-\series bold
-\backslash
-footnotetext{
-\series default
-Printed table footnote.
-\series bold
-}
\end_layout
\begin_layout Standard
-\begin_inset Tabular
-<lyxtabular version="3" rows="2" columns="1">
-<features tabularvalignment="middle">
-<column alignment="center" valignment="top">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-This an example text.
-\begin_inset Foot
-status open
-
-\begin_layout Plain Layout
-This footnote will not be printed!
-\end_layout
-
+Footnotes in minipage boxes are printed,
+ but inside the box and with a different numbering because a minipage box is like a page inside a page.
+ (For more about minipages,
+ see section
+\begin_inset space ~
\end_inset
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Minipages"
+nolink "false"
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-This an example text.
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
+.) To get a footnote in the minipage that is output at the bottom of the page like normal footnotes use this method:
+ Instead of the footnote the command
+\series bold
\backslash
footnotemark{}
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\end_inset
-</cell>
-</row>
-</lyxtabular>
-
-\end_inset
-
-
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
+\series default
+ is inserted as \SpecialChar TeX
+ code.
+ The text of the footnote is entered as an argument of the \SpecialChar TeX
+ code command
+\series bold
\backslash
-footnotetext{
-\end_layout
-
-\end_inset
-
-Printed table footnote.
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-}
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-Footnotes in multi-page tables are described in section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "subsec:Footnotes-in-Multi-page"
-
+footnotetext
+\series default
+ after the minipage.
+\begin_inset Newline newline
\end_inset
-.
+This was done for the following minipage with the command
\end_layout
\begin_layout Standard
-Footnotes in minipage boxes are printed, but inside the box and with a different
- numbering because a minipage box is like a page inside a page.
- (For more about minipages, see section
-\begin_inset space ~
-\end_inset
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Minipages"
-
-\end_inset
-
-.) To get a footnote in the minipage that is output at the bottom of the
- page like normal footnotes, also use the method of
\series bold
\backslash
-footnotemark{}
+footnotetext{
\series default
- and
+Footnote outside the minipage.
\series bold
-
-\backslash
-footnotetext
-\series default
-.
+}
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-To refer to the same footnote several times without printing the footnote
- text every time, use the command
+To refer to the same footnote several times without printing the footnote text every time,
+ use the command
\series bold
\backslash
\begin_inset Newline newline
\end_inset
-As you do not know the number of the repeating footnote while you are writing
- the text, you have to store its number.
- For the following footnote mark example, these commands were inserted in
- \SpecialChar TeX
+As you do not know the number of the repeating footnote while you are writing the text,
+ you have to store its number.
+ For the following footnote mark example,
+ these commands were inserted in \SpecialChar TeX
code after Footnote
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "foot:This-is-an"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-If you want to repeat the previous footnote, you can omit the storage of
- the footnote number and just use this command instead:
+If you want to repeat the previous footnote,
+ you can omit the storage of the footnote number and just use this command instead:
\end_layout
\begin_layout Standard
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Footnotes ! Numbering
+Footnotes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Numbering
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
To reset the footnote number back to 1 after each section
\family roman
-, add this command to your document preamble:
+,
+ add this command to your document preamble:
\end_layout
\begin_layout Standard
\begin_inset VSpace bigskip
\end_inset
-The following preamble command changes the footnote numbering style to small
- roman numerals:
+The following preamble command changes the footnote numbering style to small roman numerals:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-To change the numbering style to capital roman numerals replace in the command
- above
+To change the numbering style to capital roman numerals replace in the command above
\series bold
\backslash
\backslash
alph
\series default
-, respectively.
+,
+ respectively.
To
\begin_inset Quotes eld
\end_inset
\series bold
Note:
+
\series default
- You can only number 26 footnotes with Latin letters, because this numbering
- is limited to single letters.
+ You can only number 26 footnotes with Latin letters,
+ because this numbering is limited to single letters.
\end_layout
\end_inset
\series bold
Note:
+
\series default
You can only number 9 footnotes with symbols.
\end_layout
\end_layout
\begin_layout Standard
-To return to the default numbering style after you have changed to another
- one, use
+To return to the default numbering style after you have changed to another one,
+ use
\series bold
\backslash
\begin_inset Quotes erd
\end_inset
-, add the following command to your document preamble:
+,
+ add the following command to your document preamble:
\end_layout
\begin_layout Standard
\backslash
numberwithin
\series default
-, set in the tab
+,
+ set in the tab
\family sans
Math
\begin_inset space ~
\series bold
Note:
+
\series default
\series bold
\backslash
numberwithin
\series default
- always prints out the footnote number as arabic number; previous redefinitions
- to get non-arabic numbers are overwritten.
+ always prints out the footnote number as arabic number;
+ previous redefinitions to get non-arabic numbers are overwritten.
\end_layout
\end_inset
\begin_inset Quotes erd
\end_inset
-, use this command instead of
+,
+ use this command instead of
\series bold
\backslash
\begin_layout Subsection
Footnote Placement
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Footnotes ! Placement
+Footnotes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Placement
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-If you have several footnotes in one page, they appear without vertical
- space between them at the bottom of the page.
+If you have several footnotes in one page,
+ they appear without vertical space between them at the bottom of the page.
To make them more readable you can e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:Standard-footnote-placement"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:Footnote-placement-in"
+nolink "false"
\end_inset
-, use the \SpecialChar LaTeX
+,
+ use the \SpecialChar LaTeX
-package
\series bold
ftnright
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! ftnright
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+ftnright
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
\begin_inset Float figure
placement !h
+alignment document
wide false
sideways false
status open
\begin_layout Standard
\begin_inset Float figure
placement !h
+alignment document
wide false
sideways false
status open
\begin_inset VSpace bigskip
\end_inset
-In some scientific literature it is usual to collect the footnotes and print
- them in a separate paragraph at the end of a section, as in Figure
+In some scientific literature it is usual to collect the footnotes and print them in a separate paragraph at the end of a section,
+ as in Figure
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:Endnotes"
+nolink "false"
\end_inset
.
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\end_inset
- To use endnotes instead of footnotes in your document, load in the menu
-
+ To use endnotes instead of footnotes in your document,
+ load in the menu
\family sans
Document\SpecialChar menuseparator
Settings\SpecialChar menuseparator
End
\family default
.
- To insert the collected footnotes, insert the command
+ To insert the collected footnotes,
+ insert the command
\end_layout
\begin_layout Standard
\begin_layout Standard
\begin_inset Float figure
+placement document
+alignment document
wide false
sideways false
status open
\end_inset
-Endnotes – footnotes are printed in a separate paragraph at the end of sections
- or chapters.
+Endnotes – footnotes are printed in a separate paragraph at the end of sections or chapters.
\end_layout
\end_inset
\begin_inset VSpace medskip
\end_inset
-The paragraph heading for the endnotes isn't automatically translated into
- the document language, this must be done manually.
+The paragraph heading for the endnotes isn't automatically translated into the document language,
+ this must be done manually.
The following preamble command translates the default English
\begin_inset Quotes eld
\end_inset
\begin_inset VSpace medskip
\end_inset
-The numbering of endnotes can be changed like the footnote numbering as
- described in section
+The numbering of endnotes can be changed like the footnote numbering as described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Footnote-Numbering"
+nolink "false"
\end_inset
-; just replace the command
+;
+ just replace the command
\series bold
\backslash
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Footnote-Numbering"
+nolink "false"
\end_inset
\backslash
footnotemark
\series default
-, that is described in section
+,
+ that is described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Footnotes"
+nolink "false"
\end_inset
\begin_inset VSpace bigskip
\end_inset
-Footnotes can also be placed in the page margin and the footnote text alignment
- can be changed, see the \SpecialChar LaTeX
+Footnotes can also be placed in the page margin and the footnote text alignment can be changed,
+ see the \SpecialChar LaTeX
-package
\series bold
footmisc
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! footmisc
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+footmisc
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
-,
+,
+
\begin_inset CommandInset citation
LatexCommand cite
key "footmisc"
+literal "true"
\end_inset
\begin_layout Standard
For various further footnote formatting issues have a look at \SpecialChar LaTeX
--books,
+-books,
+
\begin_inset CommandInset citation
LatexCommand cite
key "latexcompanion,latexguide,latexbook"
+literal "true"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! KOMA-Script
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+KOMA-Script
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
- document class, you can adjust all footnote settings using class-specific
- commands, see
+ document class,
+ you can adjust all footnote settings using class-specific commands,
+ see
\begin_inset CommandInset citation
LatexCommand cite
key "KOMA-Script"
+literal "true"
\end_inset
\begin_layout Section
Margin Notes
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Notes ! Margin Notes
+Notes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Margin Notes
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
Margin notes appear at the right side in single-sided documents.
- In double-sided documents they appear in the outer margin – left on even
- pages, right on odd pages.
- The text of margin notes is aligned opposite to the outer margin – right-aligne
-d when the note appears in the left margin.
- The first line of the margin note is placed at the position of the text
- line where it is inserted in the document.
+ In double-sided documents they appear in the outer margin – left on even pages,
+ right on odd pages.
+ The text of margin notes is aligned opposite to the outer margin – right-aligned when the note appears in the left margin.
+ The first line of the margin note is placed at the position of the text line where it is inserted in the document.
\end_layout
\begin_layout Standard
\begin_inset VSpace bigskip
\end_inset
-To place the margin note in the inner margin, add the command
+To place the margin note in the inner margin,
+ add the command
\end_layout
\begin_layout Standard
\series bold
Note:
+
\series default
- There is often not enough space in the inner margin so that the notes are
- not correctly displayed in the output.
+ There is often not enough space in the inner margin so that the notes are not correctly displayed in the output.
\end_layout
\end_inset
\series bold
Note:
+
\series default
- The command is ignored when it is within a paragraph where also the command
-
+ The command is ignored when it is within a paragraph where also the command
\series bold
\backslash
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Multiple-Lines-in"
+nolink "false"
\end_inset
-, long words cannot be hyphenated when they are the first word in a margin
- note.
- To avoid this, insert 0
+,
+ long words cannot be hyphenated when they are the first word in a margin note.
+ To avoid this,
+ insert 0
\begin_inset space \thinspace{}
\end_inset
\series bold
Note:
+
\series default
- Margin notes can normally not be used inside tables, floats, and footnotes.
+ Margin notes can normally not be used inside tables,
+ floats,
+ and footnotes.
\end_layout
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! marginnote
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+marginnote
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
.
- By adding these two lines to your document preamble, the command used by
- \SpecialChar LyX
+ By adding these two lines to your document preamble,
+ the command used by \SpecialChar LyX
for margin notes is redefined to use the command provided by the
\series bold
marginnote
\series bold
marginnote
\series default
- has another useful feature: You can set a vertical offset for the note.
- This is often needed when too many margin notes are too close together
- or for a better page layout.
+ has another useful feature:
+ You can set a vertical offset for the note.
+ This is often needed when too many margin notes are too close together or for a better page layout.
The offset is set in \SpecialChar LyX
as \SpecialChar TeX
Code directly after the margin note in the scheme
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Units"
+nolink "false"
\end_inset
.
- A negative value shifts the note up, a positive value shifts it down.
+ A negative value shifts the note up,
+ a positive value shifts it down.
\family roman
\series medium
\begin_inset CommandInset citation
LatexCommand cite
key "marginnote"
+literal "true"
\end_inset
You can adjust the layout of margin notes by changing its definition.
To create for example a header for all margin notes with the underlined,
- sans-serif, and bold header text
+ sans-serif,
+ and bold header text
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, add this to your document preamble:
+,
+ add this to your document preamble:
\end_layout
\begin_layout Standard
\begin_layout Section
Introduction
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Introduction
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Introduction
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
Boxes are used to format a block of text.
- Boxes can be used to write documents with multiple languages, see section
+ Boxes can be used to write documents with multiple languages,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Minipages"
+nolink "false"
\end_inset
-, to frame texts, see section
+,
+ to frame texts,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Decoration"
+nolink "false"
\end_inset
-, to prevent words from being hyphenated, see section
+,
+ to prevent words from being hyphenated,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Prevent-Hyphenation"
+nolink "false"
\end_inset
-, to align text, see section
+,
+ to align text,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:Vertical-Alignment"
+nolink "false"
\end_inset
-, or to set the background color of texts, see section
+,
+ or to set the background color of texts,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Colored-Boxes"
+nolink "false"
\end_inset
\family sans
Box (Minipage)
\family default
-:
+:
+
\begin_inset Graphics
filename clipart/BoxInsetDefault.png
- scale 85
+ scale 95
scaleBeforeRotation
\end_inset
will be inserted.
- The box type can be specified by right-clicking on the box and selecting
-
+ The box type can be specified by right-clicking on the box and selecting
\family sans
Settings
\family default
\family sans
Makebox
\family default
-,
+,
+
\family sans
Parbox
\family default
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Minipages"
+nolink "false"
\end_inset
-; the type
+;
+ the type
\family sans
Parbox
\family default
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Parboxes"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Prevent-Hyphenation"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-Boxes are not numbered and can therefore not be referenced like floats or
- footnotes.
+Boxes are not numbered and can therefore not be referenced like floats or footnotes.
\end_layout
\begin_layout Standard
\series bold
Note:
+
\series default
Boxes must not be the item in an
\family sans
\series bold
Note:
+
\series default
For an unknown reason you can only set the
\family sans
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Prevent-Hyphenation"
+nolink "false"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Box Dialog
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Box Dialog
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Subsection
Size
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Size
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Size
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Units"
+nolink "false"
\end_inset
\begin_inset space ~
\end_inset
-times the text height:
+times the text height:
+
\begin_inset Box Boxed
position "c"
hor_pos "c"
\begin_inset space \thinspace{}
\end_inset
-Depth:
+Depth:
+
\begin_inset Box Boxed
position "c"
hor_pos "c"
\end_layout
\begin_layout Description
-Width This sets the width of the box as height:
+Width This sets the width of the box as height:
+
\begin_inset Box Boxed
position "c"
hor_pos "c"
\begin_layout Subsection
Alignment
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Alignment
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Alignment
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
Box
\family default
-, the vertical box alignment can be:
+,
+ the vertical box alignment can be:
\end_layout
\begin_layout Description
\series bold
Note:
+
\series default
- The vertical box alignment can be lost in the output when you have two
- boxes in a line and one has e.
+ The vertical box alignment can be lost in the output when you have two boxes in a line and one has e.
\begin_inset space \thinspace{}
\end_inset
\begin_layout Standard
The horizontal box alignment can be set via \SpecialChar LyX
-'s paragraph dialog when you
- set the box into its own paragraph.
+'s paragraph dialog when you set the box into its own paragraph.
\end_layout
\begin_layout Standard
Box
\family default
-, the box content can be aligned vertically to:
+,
+ the box content can be aligned vertically to:
\end_layout
\begin_layout Description
\end_layout
\begin_layout Standard
-To stretch the box content, it must consist of more than one paragraph.
+To stretch the box content,
+ it must consist of more than one paragraph.
In the example above every text line is in an own paragraph.
\end_layout
\end_inset
To align the box content horizontally you can use \SpecialChar LyX
-'s paragraph dialog when
- you have chosen an
+'s paragraph dialog when you have chosen an
\family sans
Inner
\begin_inset space ~
Box
\family default
-, you can align the box content horizontally in the box dialog.
+,
+ you can align the box content horizontally in the box dialog.
\end_layout
\begin_layout Standard
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Decoration
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Decoration
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The type of the box can be specified in the box dialog in the drop-down
- list
+The type of the box can be specified in the box dialog in the drop-down list
\family sans
Decoration
\family default
\begin_layout Plain Layout
\align center
-Oval box, thin
+Oval box,
+ thin
\end_layout
\end_inset
\begin_layout Plain Layout
\align center
-Oval box, thick
+Oval box,
+ thick
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Colored-Boxes"
+nolink "false"
\end_inset
\end_inset
-, it always uses the whole column width and the box is set as its own paragraph.
+,
+ it always uses the whole column width and the box is set as its own paragraph.
\begin_inset Box Shaded
position "t"
\begin_inset space ~
\end_inset
-thickness, the thickness of the outer frame is 1.5
+thickness,
+ the thickness of the outer frame is 1.5
\begin_inset space \thinspace{}
\end_inset
\SpecialChar LyX
's box label will reflect the different frame types.
- To be able to use all types, the \SpecialChar LaTeX
+ To be able to use all types,
+ the \SpecialChar LaTeX
-package
\series bold
fancybox
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! fancybox
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+fancybox
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\family sans
simple rectangular frame
\family default
- and no inner box, you can allow page breaks within a box.
- Note that then, unlike other framed boxes, the frame always uses the whole
- column width and the box is set as its own paragraph:
+ and no inner box,
+ you can allow page breaks within a box.
+ Note that then,
+ unlike other framed boxes,
+ the frame always uses the whole column width and the box is set as its own paragraph:
+
\begin_inset Box Framed
position "t"
hor_pos "c"
\begin_layout Section
Box Customization
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Customization
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Customization
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The diameter of the round corners of the oval boxes can be set with the
- command
+The diameter of the round corners of the oval boxes can be set with the command
\series bold
\backslash
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Colored-Tables"
+nolink "false"
\end_inset
\series bold
color
\series default
- in the preamble, see section
+ in the preamble,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Colored-Boxes"
+nolink "false"
\end_inset
\end_inset
- For example the appearance of the following shaded background box is set
- with the \SpecialChar TeX
+ For example the appearance of the following shaded background box is set with the \SpecialChar TeX
Code command
\end_layout
\begin_inset VSpace bigskip
\end_inset
-Manually changed sizes and colors are valid for all boxes following the
- commands that change them.
+Manually changed sizes and colors are valid for all boxes following the commands that change them.
\end_layout
\begin_layout Section
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Minipages
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Minipages
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Standard
Minipages are treated by \SpecialChar LaTeX
- as pages within pages and can therefore for example
- have their own footnotes.
+ as pages within pages and can therefore for example have their own footnotes.
\end_layout
\begin_layout Standard
\begin_inset space \thinspace{}
\end_inset
-col% and they are separated by a horizontal fill, that was inserted via
- the menu
+col% and they are separated by a horizontal fill,
+ that was inserted via the menu
\family sans
Insert\SpecialChar menuseparator
Special
\end_inset
The document-wide paragraph settings are ignored within minipages.
- That means that there will be no space between paragraphs in minipages
- although you set it to e.
+ That means that there will be no space between paragraphs in minipages although you set it to e.
\begin_inset space \thinspace{}
\end_inset
\end_layout
\begin_layout Standard
-Minipages can also be used to set a background color for text parts, see
- section
+Minipages can also be used to set a background color for text parts,
+ see section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Colored-Boxes"
+nolink "false"
\end_inset
\series bold
Note:
+
\series default
- You cannot have floats or margin notes inside minipages but minipages can
- be used inside tables, floats, and other boxes.
+ You cannot have floats or margin notes inside minipages but minipages can be used inside tables,
+ floats,
+ and other boxes.
\end_layout
\end_inset
\begin_layout Standard
\SpecialChar LyX
- has also basic support for minipages whose size is automatically determined
- by the width of their contents, via the module
+ has also basic support for minipages whose size is automatically determined by the width of their contents,
+ via the module
\family sans
Variable-width Minipages
\family default
\emph on
varwidth-floats-side-by-side
\emph default
- gives examples of variable-width minipages used for placing two floats
- side-by-side.
+ gives examples of variable-width minipages used for placing two floats side-by-side.
\end_layout
\begin_layout Section
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Parboxes
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Parboxes
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Parboxes are very similar to minipages with the difference that they cannot
- have footnotes.
+Parboxes are very similar to minipages with the difference that they cannot have footnotes.
\end_layout
\begin_layout Standard
\begin_layout Section
Boxes for Words and Characters
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! for Characters
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+for Characters
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! to Prevent Hyphenation
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+to Prevent Hyphenation
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Quotes erd
\end_inset
-, put the word into a box, set the
+,
+ put the word into a box,
+ set the
\family sans
Inner
\begin_inset space ~
\begin_layout Standard
Of course the word now protrudes over the side margin.
- To avoid this, add via the menu
+ To avoid this,
+ add via the menu
\family sans
Insert\SpecialChar menuseparator
Formatting\SpecialChar menuseparator
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! for Vertical Alignment
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+for Vertical Alignment
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Raiseboxes
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Raiseboxes
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\backslash
raisebox
\series default
- you can align words, characters or other boxes vertically relative to the
- surrounding text.
+ you can align words,
+ characters or other boxes vertically relative to the surrounding text.
\series bold
\end_layout
\begin_layout Standard
-The lift can be a positive value to raise the box or a negative value to
- lower the box.
+The lift can be a positive value to raise the box or a negative value to lower the box.
\end_layout
\begin_layout Standard
\begin_inset Quotes erd
\end_inset
- is at the baseline, insert the command
+ is at the baseline,
+ insert the command
\end_layout
\begin_layout Standard
\begin_inset VSpace bigskip
\end_inset
-When you raise or lower characters in a line, the line distance will be
- spread:
+When you raise or lower characters in a line,
+ the line distance will be spread:
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-If you want to prevent this for a certain reason, set the box height to
- a zero value.
+If you want to prevent this for a certain reason,
+ set the box height to a zero value.
For example use
\end_layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! Color
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Color
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To color the background of a box just select the color you like in the box
- dialog.
- This is for example a box with orange background:
+To color the background of a box just select the color you like in the box dialog.
+ This is for example a box with orange background:
+
\begin_inset Box Frameless
position "t"
hor_pos "c"
frame
\family default
you can set a frame color.
- In this case you must also specify a background color (LyX sets white as
- default).
- Here is an example:
+ In this case you must also specify a background color (LyX sets white as default).
+ Here is an example:
+
\begin_inset Box Boxed
position "t"
hor_pos "c"
\begin_layout Plain Layout
\color yellow
-This is colored text within a colored, framed box
+This is colored text within a colored,
+ framed box
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-If you need another color than the predefined ones, you can define your
- own color as described in section
+If you need another color than the predefined ones,
+ you can define your own color as described in section
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Colored-Tables"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-The box content can also be a box and colored boxes can also be within other
- boxes.
+The box content can also be a box and colored boxes can also be within other boxes.
To have e.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \space{}
\end_inset
-a darkgreen background for a word, insert the command
+a darkgreen background for a word,
+ insert the command
\end_layout
\begin_layout Standard
\end_layout
\begin_layout Standard
-Framed, colored boxes are created with the command
+Framed,
+ colored boxes are created with the command
\series bold
\backslash
\end_layout
\begin_layout Standard
-To use the boxes described in this section, the module
+To use the boxes described in this section,
+ the module
\family sans
GraphicBoxes
\family default
\series bold
Note:
+
\series default
Not all DVI viewers are able to display rotated or scaled material.
\end_layout
\series bold
Note:
+
\series default
Floats are not allowed inside a rotated or scaled box.
\end_layout
\begin_layout Subsection
Rotated Boxes
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! rotated
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+rotated
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-To rotate material, you can put it into a
+To rotate material,
+ you can put it into a
\family sans
Rotatebox
\family default
origin=position
\series default
.
- The following positions are possible:
+ The following positions are possible:
+
\emph on
c
\emph default
- (center),
+ (center),
+
\emph on
l
\emph default
- (left),
+ (left),
+
\emph on
r
\emph default
- (right),
+ (right),
+
\emph on
b
\emph default
- (bottom),
+ (bottom),
+
\emph on
t
\emph default
- (top), along with meaningful combinations of the four base positions.
+ (top),
+ along with meaningful combinations of the four base positions.
For example
\emph on
lt
\emph default
means that the rotation origin is at the top left corner of the box.
- When no rotation origin is specified, the position
+ When no rotation origin is specified,
+ the position
\emph on
l
\emph default
will be used.
- The rotation angle is a number that can be negative that specifies the
- angle in degrees.
+ The rotation angle is a number that can be negative that specifies the angle in degrees.
The rotation direction is counterclockwise.
\end_layout
\begin_inset Graphics
- filename clipart/platypus.eps
+ filename clipart/Star-structure.pdf
lyxscale 50
width 25col%
and table.
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Figures ! rotated
+Figures
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+rotated
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Customization ! Rotating
+Table Customization
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Rotating
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\series bold
Note:
+
\series default
If the
\family sans
Angle
\family default
inset is empty or contains other characters than numbers you will get \SpecialChar LaTeX
-
errors when viewing/exporting the document.
\end_layout
\begin_layout Subsection
Scaled Boxes
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Boxes ! scaled
+Boxes
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+scaled
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
V-Factor)
\family default
.
- Input there the horizontal and vertical scale factor, respectively.
+ Input there the horizontal and vertical scale factor,
+ respectively.
If no
\family sans
V-Factor
\family default
- inset is used, the horizontal factor will also be used as the vertical
- one.
+ inset is used,
+ the horizontal factor will also be used as the vertical one.
\end_layout
\begin_layout Standard
-To get for example the double text size, compared to the document text size,
+To get for example the double text size,
+ compared to the document text size,
insert
\series bold
2
H-Factor
\family default
inset.
- An example:
+ An example:
+
\begin_inset Flex Scalebox
status open
\end_layout
\begin_layout Standard
-If the scaling factor is negative, the box content will be mirrored.
+If the scaling factor is negative,
+ the box content will be mirrored.
Therefore
\series bold
-1
\family sans
V-Factor
\family default
- can be used to create mirror writing:
+ can be used to create mirror writing:
+
\begin_inset Flex Scalebox
status open
\series bold
Note:
+
\series default
If the
\family sans
H-Factor
\family default
- inset is empty or contains other characters than numbers you will get LaTeX
- errors when viewing/exporting the document.
+ inset is empty or contains other characters than numbers you will get LaTeX errors when viewing/exporting the document.
\end_layout
\end_inset
Height)
\family default
.
- Input there the width and height, respectively, as value with a unit.
+ Input there the width and height,
+ respectively,
+ as value with a unit.
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Units"
+nolink "false"
\end_inset
If there is an exclamation mark
\series bold
!
+
\series default
- in of of the two insets, the size is set so that the aspect ratio of the
- box content is kept.
+ in one of the two insets,
+ the size is set so that the aspect ratio of the box content is kept.
If no
\family sans
Height
\family sans
Height
\family default
- produces:
+ produces:
+
\begin_inset Flex Resizebox
status open
and
\series bold
!
+
\series default
as
\family sans
\family sans
Height
\family default
-) produces:
+) produces:
+
\begin_inset Flex Resizebox
status open
\series bold
Note:
+
\series default
If the
\family sans
Width
\family default
- inset is empty or contains an invalid unit you will get LaTeX errors when
- viewing/exporting the document.
+ inset is empty or contains an invalid unit you will get LaTeX errors when viewing/exporting the document.
\end_layout
\end_inset
\begin_layout Standard
\noindent
-Images, tables, and inline formulas are allowed as box content:
+Images,
+ tables,
+ and inline formulas are allowed as box content:
\end_layout
\begin_layout Standard
\begin_layout Plain Layout
\begin_inset Graphics
- filename clipart/platypus.eps
+ filename clipart/Star-structure.pdf
lyxscale 50
width 25col%
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Figures ! scaled
+Figures
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+scaled
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Table Customization ! Scaling
+Table Customization
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Scaling
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_inset
-, display style formulas can also be scaled.
+,
+ display style formulas can also be scaled.
\end_layout
\begin_layout Chapter
Objects Surrounded by Text
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Wrap Floats
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Wrap Floats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Surrounded by text ! Wrap Floats
+Surrounded by text
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Wrap Floats
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Plain Layout
\begin_inset Graphics
- filename clipart/mobius.eps
+ filename clipart/2D-intensity-plot.pdf
width 40col%
scaleBeforeRotation
rotateOrigin center
\end_inset
-This is a figure wrap float.
+This is a
+\change_deleted 274215730 1669306080
+figure wrap
+\change_inserted 274215730 1669306089
+wrapped figure
+\change_unchanged
+ float.
\end_layout
\end_inset
\end_inset
- This float type is used if you want to wrap text around a figure or table
- so that it only occupies some fraction of the column width.
+ This float type is used if you want to wrap text around a figure or table so that it only occupies some fraction of the column width.
It can be inserted using the menu
\family sans
Insert\SpecialChar menuseparator
Floats\SpecialChar menuseparator
+
+\change_inserted 274215730 1669306057
+Wrapped
+\begin_inset space ~
+\end_inset
+
+Figure
+\change_deleted 274215730 1669306060
Figure
\begin_inset space ~
\end_inset
\end_inset
Float
+\change_unchanged
+
\family default
or
+\change_deleted 274215730 1669306067
+
\family sans
Table
\begin_inset space ~
\end_inset
Float
+\change_inserted 274215730 1669306070
+Wrapped
+\begin_inset space ~
+\end_inset
+
+Table
+\change_unchanged
+
\family default
if the \SpecialChar LaTeX
-package
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! wrapfig
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+wrapfig
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_inset
- The settings of the float can be modified by right-clicking on the float
- box.
+ The settings of the float can be modified by right-clicking on the float box.
The mandatory settings are the float
\family sans
Placement
\begin_inset space \thinspace{}
\end_inset
-page margin, and the
+page margin,
+ and the
\family sans
Line
\begin_inset space ~
span
\family default
that specifies how many text lines the float will approximately need.
- The line span is often hard to approximate; so it is better only to use
- it when you encounter float placement problems.
+ The line span is often hard to approximate;
+ so it is better only to use it when you encounter float placement problems.
You can furthermore decide if \SpecialChar LaTeX
- is allowed to let the float float within
- the paragraph or to surrounding paragraphs.
+ is allowed to let the float float within the paragraph or to surrounding paragraphs.
Figure
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "fig:This-is-a"
+nolink "false"
\end_inset
\begin_inset space \thinspace{}
\end_inset
-col%, 1
+col%,
+ 1
\begin_inset space \thinspace{}
\end_inset
-cm overhang, set to the left.
+cm overhang,
+ set to the left.
\end_layout
\begin_layout Standard
\series bold
Note:
+
\series default
Text
\begin_inset space ~
\end_inset
-wrap float floats are fragile! E.
+wrap float floats are fragile!
+ E.
\begin_inset space \thinspace{}
\end_inset
\begin_inset space \space{}
\end_inset
-having a figure too close to the bottom of the page can mess things up in
- such a way that the float does not appear in the output or that it is placed
- over some other text.
+having a figure too close to the bottom of the page can mess things up in such a way that the float does not appear in the output or that it is placed over some other text.
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-In general, the following applies for wrap floats:
+In general,
+ the following applies for wrap floats:
\end_layout
\begin_layout Itemize
They should not be placed in paragraphs that run over a page break.
- That means that wrap floats are better inserted in their exact place when
- the document is almost finished and you are able to estimate where page
- breaks will appear.
+ That means that wrap floats are better inserted in their exact place when the document is almost finished and you are able to estimate where page breaks will appear.
\end_layout
\begin_layout Itemize
-They should either be placed in their own paragraph before the paragraph
- where they should wrap into or within a paragraph.
+They should either be placed in their own paragraph before the paragraph where they should wrap into or within a paragraph.
\end_layout
\begin_layout Itemize
-In consecutive paragraphs they may cause troubles, so ensure that there
- is a text paragraph between them as separator.
+In consecutive paragraphs they may cause troubles,
+ so ensure that there is a text paragraph between them as separator.
\end_layout
\begin_layout Itemize
\begin_inset CommandInset ref
LatexCommand ref
reference "chap:Floats"
+nolink "false"
\end_inset
\begin_layout Section
Surrounded Fixed Objects
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Surrounded by text ! Fixed objects
+Surrounded by text
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Fixed objects
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Wrap-Floats"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-To get an object exactly at the position where it is inserted, for example
- to get one of these positions:
+To get an object exactly at the position where it is inserted,
+ for example to get one of these positions:
\begin_inset VSpace defskip
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! picinpar
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+picinpar
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Graphics
- filename clipart/mobius.eps
+ filename clipart/2D-intensity-plot.pdf
lyxscale 60
width 40col%
scaleBeforeRotation
\size small
-It was in the spring of the year 1894 that all London was interested, and
- the fashionable world dismayed, by the murder of the Honourable Ronald
- Adair under most unusual and inexplicable circumstances.
+It was in the spring of the year 1894 that all London was interested,
+ and the fashionable world dismayed,
+ by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances.
The public has already learned those particulars of the crime which
\size default
\size small
- came out in the police investigation, but a good deal was suppressed upon
- that occasion, since the case for the prosecution was so overwhelmingly
- strong that it was not necessary to bring forward all the facts.
- Only now, at the end of nearly ten years, am I allowed to supply those
- missing links which make up the whole of that remarkable chain.
+ came out in the police investigation,
+ but a good deal was suppressed upon that occasion,
+ since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts.
+ Only now,
+ at the end of nearly ten years,
+ am I allowed to supply those missing links which make up the whole of that remarkable chain.
\size default
\begin_inset ERT
\end_layout
\begin_layout Standard
-Surrounded fixed objects are used to let text float around them, at which
- the object's position in the paragraph can be determined by the number
- of lines above it.
+Surrounded fixed objects are used to let text float around them,
+ at which the object's position in the paragraph can be determined by the number of lines above it.
In contrary to floats is it not possible to have a numbered caption.
\end_layout
\begin_layout Standard
as \SpecialChar TeX
Code at the beginning of the paragraph.
- The first parameter in the bracket, here '2', defines the number of lines
- above the object, the second, here 'c', the position of the object.
- The positions 'l', 'c' and 'r' (for left, center, right) are possible.
+ The first parameter in the bracket,
+ here '2',
+ defines the number of lines above the object,
+ the second,
+ here 'c',
+ the position of the object.
+ The positions 'l',
+ 'c' and 'r' (for left,
+ center,
+ right) are possible.
Behind the command you insert the object.
In this example an image with a width of 40
\begin_inset space \thinspace{}
\end_inset
% of the text column width was inserted.
- The object can also be a table, a box or an equation.
+ The object can also be a table,
+ a box or an equation.
Behind the object the command
\end_layout
\end_layout
\begin_layout Standard
-Within a paragraph with a fixed object, you cannot insert footnotes in the
- normal way.
+Within a paragraph with a fixed object,
+ you cannot insert footnotes in the normal way.
You have to use instead the command
\series bold
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Footnotes"
+nolink "false"
\end_inset
\begin_layout Section
Initials
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Surrounded by text ! Initials
+Surrounded by text
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Initials
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-To use initials, you must have the \SpecialChar LaTeX
+To use initials,
+ you must have the \SpecialChar LaTeX
-package
\series bold
lettrine
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! lettrine
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+lettrine
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
Modules
\family default
).
- To insert an initial, use the style
+ To insert an initial,
+ use the style
\family sans
Initial
\family default
\family sans
Initial
\family default
- contains the letter(s) that is the initial, the argument
+ contains the letter(s) that is the initial,
+ the argument
\family sans
Rest
\begin_inset space ~
Options
\family default
contains parameters to modify the initial.
- For more information about the possible parameters see the documentation
- of
+ For more information about the possible parameters see the documentation of
\series bold
lettrine
\series default
-,
+,
+
\begin_inset CommandInset citation
LatexCommand cite
key "lettrine"
+literal "true"
\end_inset
\end_layout
\begin_layout Enumerate
-No optional argument, the initial is the letter 'I' in the math font
+No optional argument,
+ the initial is the letter 'I' in the math font
\begin_inset Formula $\mathfrak{Fraktur}$
\end_inset
\end_inset
- was in the spring of the year 1894 that all London was interested, and
- the fashionable world dismayed, by the murder of the Honourable Ronald
- Adair under most unusual and inexplicable circumstances.
- The public has already learned those particulars of the crime which came
- out in the police investigation, but a good deal was suppressed upon that
- occasion, since the case for the prosecution was so overwhelmingly strong
- that it was not necessary to bring forward all the facts.
+ was in the spring of the year 1894 that all London was interested,
+ and the fashionable world dismayed,
+ by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances.
+ The public has already learned those particulars of the crime which came out in the police investigation,
+ but a good deal was suppressed upon that occasion,
+ since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts.
\begin_inset Newpage newpage
\end_inset
\end_deeper
\begin_layout Enumerate
-Only one line is surrounding the initial, which is formed by two letters
- in standard font and no text is printed in small caps:
+Only one line is surrounding the initial,
+ which is formed by two letters in standard font and no text is printed in small caps:
\end_layout
\begin_deeper
\end_inset
- was in the spring of the year 1894 that all London was interested, and
- the fashionable world dismayed, by the murder of the Honourable Ronald
- Adair under most unusual and inexplicable circumstances.
- The public has already learned those particulars of the crime which came
- out in the police investigation, but a good deal was suppressed upon that
- occasion, since the case for the prosecution was so overwhelmingly strong
- that it was not necessary to bring forward all the facts.
+ was in the spring of the year 1894 that all London was interested,
+ and the fashionable world dismayed,
+ by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances.
+ The public has already learned those particulars of the crime which came out in the police investigation,
+ but a good deal was suppressed upon that occasion,
+ since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts.
\end_layout
\end_deeper
\begin_layout Enumerate
-Magenta, hanging initial over 3
+Magenta,
+ hanging initial over 3
\begin_inset space ~
\end_inset
\begin_inset Formula $\mathcal{CALLIGRAPHIC}$
\end_inset
-, the text
+,
+ the text
\begin_inset Quotes eld
\end_inset
\shape smallcaps
small caps
\shape default
-; to color the initial, you must insert this command before the initial:
+;
+ to color the initial,
+ you must insert this command before the initial:
\begin_inset Newline newline
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and add this command to the document preamble:
+,
+ and add this command to the document preamble:
\begin_inset Newline newline
\end_inset
status open
\begin_layout Plain Layout
-lines=3, lhang=0.33, loversize=0.25
+lines=3,
+ lhang=0.33,
+ loversize=0.25
\end_layout
\end_inset
\end_inset
- of the year 1894 that all London was interested, and the fashionable world
- dismayed, by the murder of the Honourable Ronald Adair under most unusual
- and inexplicable circumstances.
- The public has already learned those particulars of the crime which came
- out in the police investigation, but a good deal was suppressed upon that
- occasion, since the case for the prosecution was so overwhelmingly strong
- that it was not necessary to bring forward all the facts.
+ of the year 1894 that all London was interested,
+ and the fashionable world dismayed,
+ by the murder of the Honourable Ronald Adair under most unusual and inexplicable circumstances.
+ The public has already learned those particulars of the crime which came out in the police investigation,
+ but a good deal was suppressed upon that occasion,
+ since the case for the prosecution was so overwhelmingly strong that it was not necessary to bring forward all the facts.
\end_layout
\end_deeper
\begin_layout Chapter
External Document Parts
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\end_inset
Document Another \SpecialChar LyX
- document; its content is directly inserted to your document.
+ document;
+ its content is directly inserted to your document.
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-Text A text document; each line is inserted in your document as a separate
- paragraph.
+Text A text document;
+ each line is inserted in your document as a separate paragraph.
\end_layout
\begin_layout Description
\begin_inset space ~
\end_inset
-Lines A text document; text lines are inserted in your document continuously
- but an empty text line creates a new paragraph.
+Lines A text document;
+ text lines are inserted in your document continuously but an empty text line creates a new paragraph.
\end_layout
\begin_layout Description
\begin_layout Section
External Material
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-External Document Parts ! External Material
+External Document Parts
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+External Material
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-The external material feature allows you to insert files into your document
- without converting them to a format that can be read by the document output
- format.
+The external material feature allows you to insert files into your document without converting them to a format that can be read by the document output format.
\SpecialChar LyX
takes care of the necessary conversions.
- This is similar to images that can be inserted in various image formats
- in \SpecialChar LyX
+ This is similar to images that can be inserted in various image formats in \SpecialChar LyX
documents.
When you have enabled Instant Preview in \SpecialChar LyX
's preferences under
feel\SpecialChar menuseparator
Graphics
\family default
-, the external material types Dia and Xfig are directly shown in \SpecialChar LyX
+,
+ the external material types Dia and Xfig are directly shown in \SpecialChar LyX
.
\end_layout
\begin_inset space ~
\end_inset
-diagram This template supports chess position diagrams made with the program
-
+diagram This template supports chess position diagrams made with the program
\series bold
\begin_inset CommandInset href
LatexCommand href
name "XBoard"
-target "http://en.wikipedia.org/wiki/XBoard"
+target "https://en.wikipedia.org/wiki/XBoard"
+literal "false"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "Dia"
-target "http://en.wikipedia.org/wiki/Dia_(software)"
+target "https://en.wikipedia.org/wiki/Dia_(software)"
+literal "false"
\end_inset
\end_layout
\begin_layout Description
-Spreadsheet With this template you can insert spreadsheets
-\begin_inset space \thinspace{}
-\end_inset
-
-/
-\begin_inset space \thinspace{}
+Inkscape
+\begin_inset space ~
\end_inset
-tables in the format of
+figure This template supports specific scalable images derived from scalable vector graphics (SVG),
+ in which the contained text is replaced by a version typeset by \SpecialChar LaTeX
+ (and hence in the current document font).
+ It relies on a feature of the program
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "Gnumeric"
-target "http://en.wikipedia.org/wiki/Gnumeric"
+name "Inkscape"
+target "https://inkscape.org/"
+literal "false"
\end_inset
\series default
-,
-\begin_inset CommandInset href
-LatexCommand href
-name "OpenDocument"
-target "http://en.wikipedia.org/wiki/OpenDocument"
+ which creates a special PDF or EPS and \SpecialChar LaTeX
+ file from a given SVG file (in
+\noun on
+Inkscape
+\noun default
+ itself,
+ the feature is available via the option
+\family sans
+Omit text in PDF and create LaTeX file
+\family default
+ when saving a drawing as PDF or EPS).
+ The benefit of such files is a uniform text style throughout the whole document.
+\begin_inset Newline newline
+\end_inset
+The external template reads SVG files and uses a converter program to generate the respective PDF\SpecialChar breakableslash
+EPS and \SpecialChar LaTeX
+ files (via
+\noun on
+
+\noun default
+Inkscape
+\noun on
+)
+\noun default
+ on the fly,
+ so you don't have to export those files yourself.
+ If you prefer the latter and want use given
+\family typewriter
+*.pdf
+\family default
+ and
+\family typewriter
+*.pdf_tex
+\family default
+ or
+\family typewriter
+*.eps
+\family default
+ and
+\family typewriter
+*.eps_tex
+\family default
+ files instead,
+ simply input the respective
+\family typewriter
+*.pdf_tex
+\family default
+ or
+\family typewriter
+*.eps_tex
+\family default
+ file via the
+\family sans
+Child Documents
+\family default
+ dialog (see sec.
+\begin_inset space ~
\end_inset
-,
-\begin_inset CommandInset href
-LatexCommand href
-name "Microsoft Office XML"
-target "http://en.wikipedia.org/wiki/Microsoft_Office_XML_formats"
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Child-Documents"
+nolink "false"
\end_inset
- and
-\begin_inset CommandInset href
-LatexCommand href
-name "Office Open XML"
-target "http://en.wikipedia.org/wiki/Office_Open_XML"
+) rather than using this template.
+\begin_inset Newline newline
+\end_inset
+
+You can use \SpecialChar TeX
+ code commands such as
+\series bold
+
+\backslash
+Large
+\series default
+,
+
+\series bold
+\backslash
+small
+\series default
+,
+ etc.
+\begin_inset space \space{}
\end_inset
-.
- For this feature \SpecialChar LyX
- must have found the program
-\family typewriter
-ssconvert
-\family default
- during its configuration.
- This program is part of Gnumeric, so that you must have Gnumeric installed,
- also if you don't have tables in the Gnumeric format.
- For examples and possible limitations have a look at \SpecialChar LyX
-'s example file
-\emph on
-spreadsheet.lyx
-\emph default
-.
+in the text of the SVG.
+ The size of the font will be taken from the settings of the \SpecialChar LyX
+ document.
+ Please refer to
+\begin_inset CommandInset citation
+LatexCommand cite
+key "Inkscape"
+literal "false"
+
+\end_inset
+
+ for more information and examples.
\end_layout
\begin_layout Description
\begin_inset CommandInset href
LatexCommand href
name "LilyPond"
-target "http://en.wikipedia.org/wiki/LilyPond"
+target "https://en.wikipedia.org/wiki/LilyPond"
+literal "false"
\end_inset
\end_inset
pages With this template you can insert PDF documents to your document.
- To specify the range of pages that should be included, use the option
+ To specify the range of pages that should be included,
+ use the option
\series bold
pages
\series default
LaTeX and LyX options
\family default
tab.
- The argument of this option is a comma separated list, containing page
- numbers (insert as option
+ The argument of this option is a comma separated list,
+ containing page numbers (insert as option
\series bold
pages={3,5,6,8}
\series default
-), ranges of page numbers (
+),
+ ranges of page numbers (
\series bold
pages={4-9}
\series default
\series bold
pages={3,{},8-11,15}
\series default
- will insert page 3, an empty page, and pages 8, 9, 10, 11 and 15.
+ will insert page 3,
+ an empty page,
+ and pages 8,
+ 9,
+ 10,
+ 11 and 15.
Page ranges are specified in the syntax
\emph on
start
\emph on
start
\emph default
- defaults to the first page; omitting
+ defaults to the first page;
+ omitting
\emph on
stop
\emph default
pages=last-1
\series default
will insert all pages in reverse order.
- If the pages option is not specified, only the first page of the PDF is
- inserted.
+ If the pages option is not specified,
+ only the first page of the PDF is inserted.
\begin_inset Newline newline
\end_inset
\series bold
noautoscale
\series default
- inserts the pages with their original size, if this option is not given,
+ inserts the pages with their original size,
+ if this option is not given,
the pages will be resized to fith the width of the page of your document.
In the tab
\family sans
\begin_inset space \thinspace{}
\end_inset
-Scale% is used, the option
+Scale% is used,
+ the option
\series bold
noautoscale
\series default
will be overwritten.
- For more info and possible options, have a look into the documentation
- of the \SpecialChar LaTeX
+ For more info and possible options,
+ have a look into the documentation of the \SpecialChar LaTeX
-package
\series bold
pdfpages
\begin_inset CommandInset citation
LatexCommand cite
key "pdfpages"
+literal "true"
\end_inset
.
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! pdfpages
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+pdfpages
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
EndFrame
\family default
environment and in a subsequent paragraph a \SpecialChar TeX
- Code box containing the command
-
+ Code box containing the command
\series bold
\backslash
setbeamertemplate{background canvas}{}
\series default
.
- Then you can insert as many paragraphs containing the PDFPages template
- as you wish.
- Behind the included PDF pages you can resume the Beamer presentation by
- beginning a new frame or by starting a new section.
- To avoid stray blank pages prior to the PDF pages, make sure to use the
-
+ Then you can insert as many paragraphs containing the PDFPages template as you wish.
+ Behind the included PDF pages you can resume the Beamer presentation by beginning a new frame or by starting a new section.
+ To avoid stray blank pages prior to the PDF pages,
+ make sure to use the
\family sans
Default
\family default
\begin_inset Newline newline
\end_inset
-Here is an included PDF which is rotated by -5°:
+Here is an included PDF which is rotated by -5°:
+
\begin_inset External
template PDFPages
filename clipart/Abstract.pdf
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Graphics-Dialog"
+nolink "false"
\end_inset
.
- Here is an inserted raster image:
+ Here is an inserted raster image:
+
\begin_inset External
template RasterImage
filename clipart/ToolbarEnvBox.png
\end_layout
\begin_layout Description
-Vector
-\begin_inset space ~
-\end_inset
-
-graphics This can be used for vector graphics.
- The image can be treated in the
-\family sans
-External material
-\family default
- dialog like the images that are usually included via the
-\family sans
-Graphics
-\family default
- dialog as described in section
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "sec:Graphics-Dialog"
-
-\end_inset
-
-.
- Here is an inserted vector graphics:
-\begin_inset External
- template VectorGraphics
- filename clipart/SVG-Drawing.svg
- scale 33
-
+Spreadsheet With this template you can insert spreadsheets
+\begin_inset space \thinspace{}
\end_inset
-
-\end_layout
-
-\begin_layout Description
-Xfig
-\begin_inset space ~
+/
+\begin_inset space \thinspace{}
\end_inset
-figure This template supports images created with the program
+tables in the format of
\series bold
\begin_inset CommandInset href
LatexCommand href
-name "Xfig"
-target "http://en.wikipedia.org/wiki/Xfig"
+name "Gnumeric"
+target "https://en.wikipedia.org/wiki/Gnumeric"
+literal "false"
\end_inset
\series default
-.
-\change_inserted 227574939 1473131626
-
-\end_layout
-
-\begin_layout Description
-
-\change_inserted 227574939 1473131628
-Inkscape
-\begin_inset space ~
-\end_inset
-
-figure This experimental template supports
-\change_inserted 2047637253 1475533187
-SVG
-\change_inserted 227574939 1473131628
-images
-\change_inserted 2047637253 1475533525
- that contain text written in \SpecialChar LaTeX
-.
-
-\change_inserted 227574939 1473131628
+,
-\change_inserted 2047637253 1475533551
-It relies on the PDF/PS+\SpecialChar LaTeX
- option of
-\change_deleted 2047637253 1475533556
-created with
-\change_inserted 227574939 1473131628
-the program
\begin_inset CommandInset href
LatexCommand href
-name "Inkscape"
-target "https://en.wikipedia.org/wiki/Inkscape"
+name "OpenDocument"
+target "https://en.wikipedia.org/wiki/OpenDocument"
+literal "false"
\end_inset
-.
-
-\change_inserted 2047637253 1475534005
-As described by the CTAN demonstration package
-\emph on
-svg-inkscape
-\emph default
,
-\end_layout
-
-\begin_deeper
-\begin_layout Quote
-
-\change_inserted 2047637253 1475534064
-
-\emph on
-using the
-\begin_inset Quotes eld
-\end_inset
+
+\begin_inset CommandInset href
+LatexCommand href
+name "Microsoft Office XML"
+target "https://en.wikipedia.org/wiki/Microsoft_Office_XML_formats"
+literal "false"
-PDF+\SpecialChar LaTeX
- output
-\begin_inset Quotes erd
\end_inset
- option of Inkscape, it is possible to include SVG in documents, in which
- \SpecialChar LaTeX
- typesets the text.
- This results in uniform text style throughout the document, including text
- in images; moreover, \SpecialChar LaTeX
- commands may be used in the image’s text, providing
- such things as mathematics and references.
-\end_layout
-
-\begin_layout Standard
-
-\change_inserted 2047637253 1475534692
-With Inkscape, even the size of the font is taken from the surrounding \SpecialChar LaTeX
+ and
+\begin_inset CommandInset href
+LatexCommand href
+name "Office Open XML"
+target "https://en.wikipedia.org/wiki/Office_Open_XML"
+literal "false"
- document.
- Of course, you can always embed \SpecialChar LaTeX
- modifiers like
-\family typewriter
+\end_inset
-\backslash
-Large
-\family default
-,
+.
+ For this feature \SpecialChar LyX
+ must have found the program
\family typewriter
-
-\backslash
-small
+ssconvert
\family default
-, etc.
- into your figure text strings.
- Refer to the
+ during its configuration.
+ This program is part of Gnumeric,
+ so that you must have Gnumeric installed,
+ also if you don't have tables in the Gnumeric format.
+ For examples and possible limitations have a look at \SpecialChar LyX
+'s example file
\emph on
-svg-inkscape
+spreadsheet.lyx
\emph default
- documentation package for more information and examples.
-\end_layout
-
-\begin_layout Standard
-
-\change_inserted 2047637253 1475534902
-It should be noted that while the image takes into account the surrounding
- font, its preview in \SpecialChar LyX
- does not.
- Wrapping the external inset in a preview inset gives better results in
- this regard.
-\end_layout
-
-\begin_layout Standard
-
-\change_deleted 2047637253 1475534821
-It
-\change_inserted 2047637253 1475534913
-The template
-\change_inserted 227574939 1473131628
- works very similarly to Xfig support, except that Inkscape is a more modern
- image editor than Xfig, which uses Scalable Vector Graphics (SVG) as its
- native format.
-
-\change_unchanged
-
-\change_inserted 227574939 1473131628
-LyX will process the image file in much the same way as it does an Xfig
- image, extracting the text into a separate TeX file for the text strings,
- and a PDF file for the rest.
+.
\end_layout
\begin_layout Description
-
-\change_inserted 227574939 1473131628
-Warning: Unfortunately the latest version of Inkscape, 0.91, contains a bug:
- with multi-page PDFs, the TeX file will sometimes reference more pages
- than the PDF file contains.
- This is the version that ships with Ubuntu 16.04.
- Its use with LyX can therefore not be recommended, until the bug is fixed
-\begin_inset Foot
-status open
-
-\begin_layout Plain Layout
-
-\change_inserted 227574939 1473131628
-A workaround for those who have already SVG figures in their document is,
- to manually do the LaTeX+PDF output from Inkscape, edit the
-\family typewriter
-.pdf_tex
-\family default
- file to remove the erroneous references, and
-\family typewriter
-
-\backslash
-input
-\family default
- it directly into LyX, i.e., not use the external-template mechanism:
-\end_layout
-
-\begin_layout Plain Layout
-
-\change_inserted 227574939 1473131628
-\begin_inset Graphics
- filename clipart/workaround.png
- scale 50
-
+Vector
+\begin_inset space ~
\end_inset
-
-\end_layout
-
-\begin_layout Plain Layout
-
-\change_inserted 227574939 1473131628
-Here, the child document input inset (
+graphics This can be used for vector graphics.
+ The image can be treated in the
\family sans
-Insert\SpecialChar menuseparator
-File\SpecialChar menuseparator
-Child Document
-\family default
-) was used, which allows you do directly edit the
-\family typewriter
-.pdf_tex
-\family default
- file in a text editor.
- The LaTeX output is based on this edited snippet as re-generation from
- the SVG file has been commented out.
-\end_layout
-
-\end_inset
-
-.
-\change_deleted 2047637253 1475534230
-
-\end_layout
-
-\begin_layout Standard
-
-\change_deleted 2047637253 1475534225
-The reason why we would use this complicated process at all, like in the
- case of Xfig, is that it makes the text strings inside the figure of the
- same font type and attributes as the surrounding text, which looks so much
- more professional.
- With Inkscape, even the
-\emph on
-size
-\emph default
- of the font is taken from the surrounding LaTeX document – in Xfig, you
- have to set it by hand to be the same.
- Of course you can always embed LaTeX modifiers like
-\family typewriter
-
-\backslash
-Large
-\family default
-,
-\family typewriter
-
-\backslash
-small
+External material
\family default
-, etc.
- into your figure text strings.
-\change_inserted 227574939 1473131628
-
-\end_layout
-
-\end_deeper
-\begin_layout Standard
-\begin_inset Float table
-placement !h
-wide false
-sideways false
-status open
-
-\begin_layout Plain Layout
-\begin_inset Caption Standard
-
-\begin_layout Plain Layout
-\begin_inset CommandInset label
-LatexCommand label
-name "tab:Comparison-of-the"
-
-\end_inset
-
-Comparison of the date input methods.
-\end_layout
-
-\end_inset
-
-
-\end_layout
-
-\begin_layout Plain Layout
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="4" columns="3">
-<features tabularvalignment="middle">
-<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Document format
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
+ dialog like the images that are usually included via the
\family sans
-Insert\SpecialChar menuseparator
-Date
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-command
-\series bold
-
-\backslash
-today
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-\SpecialChar LyX
-
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-as date
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-as \SpecialChar TeX
- Code inset box
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-\SpecialChar LaTeX
-
-\end_layout
-
+Graphics
+\family default
+ dialog as described in section
+\begin_inset space ~
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-as date
-\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-as command
-\end_layout
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sec:Graphics-Dialog"
+nolink "false"
\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-DVI, PDF, PS
-\end_layout
+.
+ Here is an inserted vector graphics:
+
+\begin_inset External
+ template VectorGraphics
+ filename clipart/SVG-Drawing.svg
+ lyxscale 50
+ scale 33
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-as date
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\begin_layout Plain Layout
-as date
\end_layout
+\begin_layout Description
+Xfig
+\begin_inset space ~
\end_inset
-</cell>
-</row>
-</lyxtabular>
-
-\end_inset
-
-\end_layout
+figure This template supports images created with the program
+\begin_inset CommandInset href
+LatexCommand href
+name "Xfig"
+target "https://en.wikipedia.org/wiki/Xfig"
+literal "false"
\end_inset
-
+.
\end_layout
\begin_layout Standard
\family sans
External Material
\family default
- dialog, only the path to the inserted file is shown in the output.
+ dialog,
+ only the path to the inserted file is shown in the output.
\begin_inset Newline newline
\end_inset
External material is displayed in \SpecialChar LyX
- either as a box like this:
+ either as a box like this:
+
\begin_inset Graphics
filename clipart/ExternalMaterial.png
- scale 75
+ scale 95
scaleBeforeRotation
\end_inset
- or as image, depending on the option
+ or as image,
+ depending on the option
\family sans
Show in LyX
\family default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-External Document Parts ! Child Documents
+External Document Parts
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Child Documents
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Files ! Include
+Files
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Include
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\end_layout
\begin_layout Standard
-Child documents are used if you have a long document consisting of several
- larger parts or sections.
- For maintenance it is often useful and sometimes even required to split
- the document into several files that can be revised separately.
+Child documents are used if you have a long document consisting of several larger parts or sections.
+ For maintenance it is often useful and sometimes even required to split the document into several files that can be revised separately.
The different documents are then the so called
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and a master document connects them to print the full document or parts
- of it.
- A child document inherits elements from its master, for example the \SpecialChar LaTeX
+,
+ and a master document connects them to print the full document or parts of it.
+ A child document inherits elements from its master,
+ for example the \SpecialChar LaTeX
preamble,
- the bibliography, and labels for cross-references.
+ the bibliography,
+ and labels for cross-references.
\end_layout
\begin_layout Standard
\family default
.
This master document will then be used in the background by \SpecialChar LyX
- when you edit
- the child document.
+ when you edit the child document.
\end_layout
\begin_layout Standard
Included documents are displayed in \SpecialChar LyX
- as a box like this:
+ as a box like this:
+
\begin_inset Graphics
filename clipart/ChildDocument.png
+ scale 95
scaleBeforeRotation
\end_inset
\family sans
Child Document
\family default
- dialog, the included document will be opened in \SpecialChar LyX
- in a new file tab so that
- you can modify it.
+ dialog,
+ the included document will be opened in \SpecialChar LyX
+ in a new file tab so that you can modify it.
\begin_inset Newline newline
\end_inset
\family sans
Include
\family default
-:
+:
+
\begin_inset CommandInset include
LatexCommand include
filename "DummyDocument1.lyx"
+literal "true"
\end_inset
\end_layout
\begin_layout Standard
-The section numbering includes the sections of the included files in the
- order they are inserted in the master document.
- The included example document has for example a subsection that is numbered
- as a subsection of this section.
- Labels of included documents can be referenced: Subsection
+The section numbering includes the sections of the included files in the order they are inserted in the master document.
+ The included example document has for example a subsection that is numbered as a subsection of this section.
+ Labels of included documents can be referenced:
+ Subsection
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "subsec:External-Subsection-1"
+nolink "false"
\end_inset
\end_layout
\begin_layout Standard
-The preamble of the child document is ignored; only the preamble of the
- master document is used.
- Branches in child documents will be ignored by the master document when
- the master document does not have a branch with the same name.
- Included documents are inserted starting on a new page and ending with
- a page break.
+The preamble of the child document is ignored;
+ only the preamble of the master document is used.
+ Branches in child documents will be ignored by the master document when the master document does not have a branch with the same name.
+ Included documents are inserted starting on a new page and ending with a page break.
\end_layout
\begin_layout Standard
\series bold
Note:
+
\series default
If you have included a \SpecialChar LyX
or \SpecialChar LaTeX
- file, you are warned when you export/view the
- document in case the child document uses another document class than the
- master document as this will lead to unexpected outputs.
+ file,
+ you are warned when you export/view the document in case the child document uses another document class than the master document as this will lead to unexpected outputs.
\end_layout
\end_inset
\family sans
Input
\family default
-:
+:
+
\begin_inset CommandInset include
LatexCommand input
filename "DummyDocument2.lyx"
+literal "true"
\end_inset
\begin_layout Description
Verbatim With this method any text file can be included.
- The file is shown in the output with its source code; no command used in
- the text is invoked.
+ The file is shown in the output with its source code;
+ no command used in the text is invoked.
You can use the option
\family sans
Mark spaces in output
\end_layout
\begin_layout Standard
-Here is a child document inserted as Verbatim:
+Here is a child document inserted as Verbatim:
+
\begin_inset CommandInset include
LatexCommand verbatiminput
filename "DummyTextDocument.txt"
+literal "true"
\end_inset
\family sans
Mark spaces in output
\family default
- option:
+ option:
+
\begin_inset CommandInset include
LatexCommand verbatiminput*
filename "DummyTextDocument.txt"
+literal "true"
\end_inset
\series bold
Note:
+
\series default
- As you can see in the examples above, the text of the documents included
- as
+ As you can see in the examples above,
+ the text of the documents included as
\family sans
verbatim
\family default
\begin_inset CommandInset ref
LatexCommand ref
reference "cha:Program-Code-Listings"
+nolink "false"
\end_inset
\series bold
Note:
+
\series default
- Including the same document twice in a document using different methods
- could cause \SpecialChar LaTeX
+ Including the same document twice in a document using different methods could cause \SpecialChar LaTeX
-problems.
\end_layout
\begin_layout Standard
If you want to view/export only selected children of your master document,
- either because you want to save compiling time or because you want to distribut
-e single chapters of the book you are just writing, you can exclude children
- from the output.
+ either because you want to save compiling time or because you want to distribute single chapters of the book you are just writing,
+ you can exclude children from the output.
This is done via the menu
\family sans
Document\SpecialChar menuseparator
\family sans
include to output
\family default
- column of the respective child document in the list (note that this only
- works for documents embedded via
+ column of the respective child document in the list (note that this only works for documents embedded via
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, not with
+,
+ not with
\begin_inset Quotes eld
\end_inset
\end_inset
).
- If the option
+
+\change_inserted -712698321 1584102244
+
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -712698321 1584102427
+In the section
+\family sans
+Global Counters & References
+\family default
+ you can set how page numbers,
+ references,
+ section counters etc.
+ are handled.
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted -712698321 1584102377
+With the option
+\family sans
+Strictly maintain
+\family default
+,
+
+\change_deleted -712698321 1584102385
+If the option
\family sans
Maintain counters and references
\family default
- is enabled, \SpecialChar LyX
- will assure that all page numbers, references etc.
+ is enabled,
+
+\change_unchanged
+\SpecialChar LyX
+ will assure that all page numbers,
+ references etc.
\begin_inset space ~
\end_inset
-are correct as if the whole document was processed.
- This is useful if you want the selected sub-documents to look exactly as
- in the context of the whole document.
- However, \SpecialChar LyX
- needs to process the whole document in the background for this
- feature.
- So if you want to save compile time and if counters and references do not
- need to be correct, disable this checkbox.
+are correct as if the whole document was
+\change_deleted -712698321 1584108508
+processed
+\change_inserted -712698321 1584108509
+output
+\change_unchanged
+.
+ This is useful if you want the selected sub-documents to look exactly as in the context of the whole document.
+ However,
+ \SpecialChar LyX
+ needs to process the whole document in the background for this feature
+\change_inserted -712698321 1584102406
+,
+ which can take a long time
+\change_unchanged
+.
+
+\change_deleted -712698321 1584103026
+
+\change_inserted -712698321 1584102447
+
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted -712698321 1584102489
+With the option
+\family sans
+Do not maintain
+\family default
+,
+
+\change_unchanged
+\SpecialChar LyX
+
+\change_inserted -712698321 1584103270
+ only compiles the master and the included documents.
+ Thus the counters will differ from the complete document,
+ and references to excluded child documents will not be resolved.
+
+\change_deleted -712698321 1584102517
+So i
+\change_inserted -712698321 1584102518
+I
+\change_unchanged
+f you want to save compile time and if counters and references do not need to be correct,
+
+\change_deleted -712698321 1584102523
+disable this checkbox
+\change_inserted -712698321 1584102546
+use this option as this is the fastest one
+\change_unchanged
+.
+\change_inserted -712698321 1584102550
+
+\end_layout
+
+\begin_layout Itemize
+
+\change_inserted -712698321 1584109486
+The option
+\family sans
+Maintain mostly
+\family default
+ is somewhat in-between the above two.
+ If this is selected,
+ \SpecialChar LyX
+ will compile the whole document at the first output,
+ which sets up counters and references correctly.
+ In subsequent outputs,
+ it will compile the whole document only if a change has been made in an excluded child document.
+ As long as you only edit the included files,
+ this approach is as fast as the second one,
+ while giving you more or less correct counters and references.
+ They are only more or less correct since the change of size of included documents obviously also changes the pagination of excluded documents,
+ but this change cannot be tracked with this method.
+\change_unchanged
+
\end_layout
\begin_layout Standard
-Alternatively, you can put each included file into a branch.
+Alternatively,
+ you can put each included file into a branch.
\begin_inset Foot
status collapsed
\end_inset
By enabling\SpecialChar breakableslash
-disabling branches you can decide which included files will
- appear in the output.
+disabling branches you can decide which included files will appear in the output.
This has the advantage that it also works with Input'ed sub-documents.
- However, counters and references will not be maintained with this approach.
+ However,
+ counters and references will not be maintained with this approach.
\end_layout
\begin_layout Chapter
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-Floats ! Listings
+Floats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+Listings
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\family default
.
The \SpecialChar LaTeX
--package
+ packages
\series bold
listings
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! listings
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+listings
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+ or
+\series bold
+minted
+\series default
+
+\begin_inset Index idx
+range none
+pageformat default
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+minted
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+ provide a powerful and flexible way to insert program source code into your document.
+ One can only use one of these packages in a document.
+
+\series bold
+listings
+\series default
+ is used by default.
+\end_layout
+
+\begin_layout Standard
+\begin_inset Note Note
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+
+\series default
+ \SpecialChar LyX
+ does NOT want to encourage users to add the
+\family typewriter
+-shell-escape
+\family default
+ option to converter definitions.
+ It works,
+ but it is a huge security risk.
+ There is an active discussion about how to handle this.
+ Once that's been resolved,
+ this can be updated appropriately.
+\end_layout
+
+\begin_layout Plain Layout
+=====
+\end_layout
+
+\begin_layout Plain Layout
+In order to use
+\series bold
+minted
+\series default
+,
+ you need to select it as the syntax highlighting package in the document settings under
+\family sans
+Listings
+\family default
+.
+
+\series bold
+minted
+\series default
+ requires also additionally the module
+\family sans
+pygments
+\family default
+ of the software
+\noun on
+Python
+\noun default
+
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+Under \SpecialChar LyX
+ for Windows
+\family sans
+pygments
+\family default
+ is already installed.
+\end_layout
+
+\end_inset
+
+ and the option
+\family typewriter
+-shell-escape
+\family default
+ for the \SpecialChar LaTeX
+ processor.
+ If you want for example view or export your document as the format
+\family sans
+PDF
+\begin_inset space ~
+\end_inset
+
+(pdflatex)
+\family default
+,
+ go to the \SpecialChar LyX
+ preferences and there to the section
+\family sans
+File
+\begin_inset space ~
+\end_inset
+
+Handling\SpecialChar menuseparator
+Converters
+\family default
+.
+ There go to the entry
+\family sans
+LaTeX
+\begin_inset space ~
+\end_inset
+
+(pdflatex) -> PDF
+\begin_inset space ~
+\end_inset
+
+(pdflatex)
+\family default
+ and look at the field
+\family sans
+Converter
+\family default
+.
+ There you see by default the content
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
+pdflatex $$i
+\series default
+
+\begin_inset Newline newline
+\end_inset
+
+Now change it to
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
+pdflatex $$i -shell-escape
+\begin_inset Newline newline
+\end_inset
+
+
+\series default
+and press the
+\family sans
+Modify
+\family default
+ button and subsequently
+\family sans
+Apply
+\family default
+ or
+\family sans
+Save
+\family default
+.
+ The same can be done for the output formats
+\family sans
+PDF
+\begin_inset space ~
+\end_inset
+
+(LuaTeX)
+\family default
+ and
+\family sans
+PDF
+\begin_inset space ~
+\end_inset
+
+(XeTeX)
+\family default
+.
\end_layout
\end_inset
- provides a powerful and flexible way to insert program source code into
- your document.
+
\end_layout
\begin_layout Standard
-Right-clicking on a listings inset opens the context menu containing where
- you can set the listings format.
+Right-clicking on a listings inset opens the context menu containing where you can set the listings format.
\end_layout
\begin_layout Standard
-By default, a listing starts a new paragraph in the output.
+By default,
+ a listing starts a new paragraph in the output.
The placement option
\family sans
Inline
listing
\family default
- prints the listing inline like this:
+ prints the listing inline like this:
+
\begin_inset listings
lstparams "language={C++}"
inline true
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-,
+,
+
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, and
+,
+ and
\begin_inset Quotes eld
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
-reference "sec:Float-Placement"
+reference "sec:Float-Settings"
+nolink "false"
\end_inset
\begin_inset Quotes erd
\end_inset
- has sometimes no effect, but you don't need to use the
+ has sometimes no effect,
+ but you don't need to use the
\family sans
Float
\family default
- option in this case as also non-float listings can have captions and be
- referenced.
+ option in this case as also non-float listings can have captions and be referenced.
\end_layout
\begin_layout Standard
-You can add captions to listings with the menu
+You can add captions to listings that are not inline with the menu
\family sans
Insert\SpecialChar menuseparator
Caption
\family default
.
- Listings can be referenced like floats: Listing
+ Listings can be referenced like floats:
+ Listing
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "lst:Example-Listing"
+nolink "false"
\end_inset
.
- A list of listings which contains all listings with captions can be created
- via the menu
+ A list of listings which contains all listings with captions can be created via the menu
\family sans
Insert\SpecialChar menuseparator
List
\end_layout
\begin_layout Standard
-When you have set a programming language in the listings dialog, the keywords
- of this language will be recognized and specially typeset in the output.
+\begin_inset Note Greyedout
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+Note:
+
+\series default
+The
+\series bold
+listings
+\series default
+ package places captions before the listing by default.
+\begin_inset Newline newline
+\end_inset
+
+The
+\series bold
+minted
+\series default
+ package places them after the listing by default if it is floating.
+ If it is not floating,
+ caption will be typeset before the listing if it is inserted to its first line,
+ otherwise it will be typeset after the listing.
+ If you want to force the placement in every case before the listing,
+ you have to add the following lines as last thing to the preamble:
+\begin_inset Newline newline
+\end_inset
+
+
+\series bold
+
+\backslash
+@ifundefined{newfloat}
+\begin_inset Newline newline
+\end_inset
+
+
+\begin_inset Phantom HPhantom
+status open
+
+\begin_layout Plain Layout
+
+\series bold
+\begin_inset space ~
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+{
+\backslash
+usepackage{float}}{}
+\begin_inset Newline newline
+\end_inset
+
+
+\backslash
+floatstyle{plaintop}
+\series default
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Plain Layout
+The package
+\series bold
+float
+\series default
+ will be loaded automatically by \SpecialChar LyX
+ when you use special document-wide float placement settings.
+ To avoid that it is loaded twice the command
+\series bold
+
+\backslash
+@ifundefined
+\series default
+ is used in the above command.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+When you have set a programming language in the listings dialog,
+ the keywords of this language will be recognized and specially typeset in the output.
In the example listings the Python keyword
\begin_inset Quotes eld
\end_inset
\series bold
Note:
+
\series default
- If you don't get bold keywords when using typewriter fonts, your
+ If you don't get bold keywords when using typewriter fonts,
+ your
\family typewriter
typewriter
\family default
.
(The fonts
\emph on
-LuxiMono, BeraMono
+LuxiMono,
+ BeraMono
\emph default
and
\emph on
numbering
\family default
of the listings dialog you can specify the line numbering style.
- You can insert a number to specify which lines are numbered in the field
-
+ You can insert a number to specify which lines are numbered in the field
\family sans
Step
\family default
\begin_inset Quotes erd
\end_inset
-, only every 3rd line will be numbered.
+,
+ only every 3rd line will be numbered.
\end_layout
\begin_layout Standard
-You can furthermore specify a range of lines; only these will then appear
- in the output.
+You can furthermore specify a range of lines;
+ only these will then appear in the output.
The option
\family sans
Extended character table
\family default
- should be used when you use national characters like the German umlauts
- in the listing.
+ is only meaningful for the
+\series bold
+listings
+\series default
+ package and should be used when you use national characters like the German umlauts in the listing.
\begin_inset Newline newline
\end_inset
-Here is an example listing with left line numbering, step
+Here is an example listing with left line numbering,
+ step
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, language
+,
+ language
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, options
+,
+ options
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-, range lines 3
+,
+ range lines 3
\begin_inset space \thinspace{}
\end_inset
\begin_layout Plain Layout
-'This is a German word: Tschüß'
+'This is a German word:
+ Tschüß'
\end_layout
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-When you have tabulators in your listing, you can specify the number of
- characters that are spanned by a tabulator in the field
+When you have tabulators in your listing,
+ you can specify the number of characters that are spanned by a tabulator in the field
\family sans
Tabulator
\begin_inset space ~
\series bold
Note:
+
\series default
Due to a bug in the
\series bold
listings
\series default
package the line numbering is shifted by a line by every previous listing.
- That's the reason why the lines 2 and 5 are numbered in the above listing
- and not the lines 3 and 6.
+ That's the reason why the lines 2 and 5 are numbered in the above listing and not the lines 3 and 6.
\end_layout
\end_inset
\begin_layout Standard
It is also possible to print lines from a file as listing.
- To do this, use the menu
+ To do this,
+ use the menu
\family sans
Insert\SpecialChar menuseparator
File\SpecialChar menuseparator
\begin_inset CommandInset ref
LatexCommand ref
reference "sec:Child-Documents"
+nolink "false"
\end_inset
\end_inset
- In the child document dialog you can specify the listing parameters in
- a text box.
- To show a list of all available parameters, type in a question mark
+ In the child document dialog you can specify the listing parameters in a text box.
+ To show a list of all available parameters,
+ type in a question mark
\begin_inset Quotes eld
\end_inset
\end_layout
\begin_layout Standard
-To reference child document listings, write a label text into the corresponding
- field of the child document dialog.
+To reference child document listings,
+ write a label text into the corresponding field of the child document dialog.
The label can then be referenced using the menu
\family sans
Insert\SpecialChar menuseparator
\begin_inset CommandInset ref
LatexCommand ref
reference "lst:file-listing"
+nolink "false"
\end_inset
- is an example for a listing of a file; there the lines 10
+ is an example for a listing of a file;
+ there the lines 10
\begin_inset space \thinspace{}
\end_inset
LatexCommand lstinputlisting
filename "EmbeddedObjects.lyx"
lstparams "breaklines=true,caption={Lines 10 - 15 of this LyX file},extendedchars=true,firstline=10,label={lst:file-listing},language={[LaTeX]TeX},lastline=15"
+literal "true"
\end_inset
\end_layout
\begin_layout Enumerate
-Copy the content of the formula (not the formula inset) to the clipboard
- (shortcut
+Copy the content of the formula (not the formula inset) to the clipboard (shortcut
\begin_inset Info
type "shortcut"
arg "copy"
Listings
\family default
dialog.
- To get there a list of available options, type in a question mark
+ To get there a list of available options,
+ type in a question mark
\begin_inset Quotes eld
\end_inset
\series bold
listings
\series default
- package, we refer to its documentation
+ and
+\series bold
+minted
+\series default
+ packages,
+ we refer to their documentation
\begin_inset CommandInset citation
LatexCommand cite
-key "listings"
+key "listings,minted"
+literal "true"
\end_inset
Units available in \SpecialChar LyX
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\end_layout
\begin_layout Standard
-To understand the units described in this documentation, Table
+To understand the units described in this documentation,
+ Table
\begin_inset space ~
\end_inset
\begin_inset CommandInset ref
LatexCommand ref
reference "tab:Units"
+nolink "false"
\end_inset
\begin_layout Standard
\begin_inset Float table
placement h
+alignment document
wide false
sideways false
status open
\begin_layout Plain Layout
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="20" columns="3">
+<lyxtabular version="3" rows="21" columns="3">
<features tabularvalignment="middle">
<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
+<column alignment="center" valignment="middle" width="50col%">
<column alignment="center" valignment="top">
<row>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
-mm
+bp
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-millimeter
+big point (72
+\begin_inset space \thinspace{}
+\end_inset
+
+bp = 1
+\begin_inset space \thinspace{}
+\end_inset
+
+in)
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-cm
+cc
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-centimeter
+cicero (1
+\begin_inset space \thinspace{}
+\end_inset
+
+cc = 12
+\begin_inset space \thinspace{}
+\end_inset
+
+dd)
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-in
+cm
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-inch
+centimeter
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-pt
+dd
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-point (72.27
+didot (1
\begin_inset space \thinspace{}
\end_inset
-pt = 1
+dd
+\begin_inset Formula $\approx$
+\end_inset
+
+ 0.376
\begin_inset space \thinspace{}
\end_inset
-in)
+mm)
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-pc
+em
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-pica (1
-\begin_inset space \thinspace{}
-\end_inset
-
-pc = 12
-\begin_inset space \thinspace{}
-\end_inset
-
-pt)
+width of letter
+\emph on
+M
+\emph default
+ in current font
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-sp
+ex
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-scaled point (65536
-\begin_inset space \thinspace{}
-\end_inset
-
-sp = 1
-\begin_inset space \thinspace{}
-\end_inset
-
-pt)
+height of letter
+\emph on
+x
+\emph default
+ in current font
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-bp
+in
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-big point (72
-\begin_inset space \thinspace{}
+inch
+\end_layout
+
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+-
+\end_layout
-bp = 1
-\begin_inset space \thinspace{}
\end_inset
+</cell>
+</row>
+<row>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-in)
+\begin_layout Plain Layout
+mm
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Plain Layout
+millimeter
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-dd
+mu
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-didot (1
+math unit (1
\begin_inset space \thinspace{}
\end_inset
-dd
-\begin_inset Formula $\approx$
-\end_inset
-
- 0.376
+mu = 1/18
\begin_inset space \thinspace{}
\end_inset
-mm)
+em)
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-cc
+pt
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-cicero (1
+point (72.27
\begin_inset space \thinspace{}
\end_inset
-cc = 12
+pt = 1
\begin_inset space \thinspace{}
\end_inset
-dd)
+in)
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Scale Graphics %
+pc
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-% of original image width
+pica (1
+\begin_inset space \thinspace{}
+\end_inset
+
+pc = 12
+\begin_inset space \thinspace{}
+\end_inset
+
+pt)
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
+-
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Text Width %
+sp
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-% of text width
+scaled point (65536
+\begin_inset space \thinspace{}
+\end_inset
+
+sp = 1
+\begin_inset space \thinspace{}
+\end_inset
+
+pt)
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-
-\backslash
-textwidth
+-
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Page Width %
+Line Distance %
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-% of paper width
+% of height between baselines of two subsequent text lines
\end_layout
\end_inset
\begin_layout Plain Layout
\backslash
-paperwidth
+baselineskip
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Text Height %
+Page Height %
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-% of text height
+% of paper height
\end_layout
\end_inset
\begin_layout Plain Layout
\backslash
-textheight
+paperheight
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-Page Height %
+Page Width %
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-% of paper height
+% of paper width
\end_layout
\end_inset
\begin_layout Plain Layout
\backslash
-paperheight
+paperwidth
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-ex
+Scale Graphics %
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-height of letter
-\emph on
-x
-\emph default
- in current font
+% of original image width
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
--
+
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-em
+Text Height %
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-width of letter
-\emph on
-M
-\emph default
- in current font
+% of text height
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
--
+
+\backslash
+textheight
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-mu
+Text Width %
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
-math unit (1
-\begin_inset space \thinspace{}
-\end_inset
-
-mu = 1/18
-\begin_inset space \thinspace{}
-\end_inset
-
-em)
+% of text width
\end_layout
\end_inset
\begin_inset Text
\begin_layout Plain Layout
--
+
+\backslash
+textwidth
\end_layout
\end_inset
\begin_layout Section
DVI
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-File Formats ! DVI
+File Formats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+DVI
\end_layout
\end_inset
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-DVI|see
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-{
\end_layout
\end_inset
-File Formats
-\begin_inset ERT
-status collapsed
+
+\begin_inset Index idx
+range none
+pageformat default
+status open
\begin_layout Plain Layout
+DVI
+\begin_inset IndexMacro see
+status open
-}
+\begin_layout Plain Layout
+File Formats
\end_layout
\end_inset
\begin_inset Quotes erd
\end_inset
- (DVI), because it is completely portable; you can move them from one machine
- to another without needing to do any sort of conversion.
- At the time when this file-format was developed, this was no matter of
- course.
+ (DVI),
+ because it is completely portable;
+ you can move them from one machine to another without needing to do any sort of conversion.
+ At the time when this file-format was developed,
+ this was no matter of course.
DVIs are used for quick previews and as pre-stage for other output formats,
like PostScript.
\end_layout
\series bold
Note:
+
\series default
- DVI-files do not contain images; they will only be a linked.
+ DVI-files do not contain images;
+ they will only be a linked.
\end_layout
\end_inset
- So don't forget this, if you move your
+ So don't forget this,
+ if you move your
\family typewriter
.dvi
\family default
file to another computer.
- This property can also slow down your computer when you view the DVI, because
- the DVI-viewer has to convert the image in the background to make it visible
- when you scroll in the DVI.
+ This property can also slow down your computer when you view the DVI,
+ because the DVI-viewer has to convert the image in the background to make it visible when you scroll in the DVI.
So it is recommended that you use PDF for files with many images.
\end_layout
\begin_layout Section
PostScript
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-File Formats ! PostScript
+File Formats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+PostScript
\end_layout
\end_inset
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-PostScript|see
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-{
\end_layout
\end_inset
-File Formats
-\begin_inset ERT
+
+\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
+PostScript
+\begin_inset IndexMacro see
+status open
-}
+\begin_layout Plain Layout
+File Formats
\end_layout
\end_inset
Adobe
\family default
as a printer language.
- The file therefore contains commands that the printer uses to print the
- file.
+ The file therefore contains commands that the printer uses to print the file.
PostScript can be seen as a
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-; you can calculate with it and draw diagrams and images.
+;
+ you can calculate with it and draw diagrams and images.
\begin_inset Foot
status collapsed
\begin_layout Plain Layout
-If you are interested to learn more about this, have a look at the \SpecialChar LaTeX
--package
-
+If you are interested to learn more about this,
+ have a look at the \SpecialChar LaTeX
+-package
\series bold
PSTricks
\series default
\begin_inset CommandInset citation
LatexCommand cite
key "pstricks"
+literal "true"
\end_inset
\end_inset
- Due to this ability, the files are often bigger than PDFs.
+ Due to this ability,
+ the files are often bigger than PDFs.
\end_layout
\begin_layout Standard
\begin_inset Quotes erd
\end_inset
- (EPS, file extension
+ (EPS,
+ file extension
\begin_inset Quotes eld
\end_inset
).
As \SpecialChar LyX
- allows you to use any known image format in your document, it has to
- convert images in the background to EPS.
+ allows you to use any known image format in your document,
+ it has to convert images in the background to EPS.
If you have e.g.
\begin_inset space ~
\end_inset
\begin_inset space ~
\end_inset
-images in your document, \SpecialChar LyX
+images in your document,
+ \SpecialChar LyX
has to do 50
\begin_inset space ~
\end_inset
conversions whenever you view or export your document.
This will slow down your work flow with \SpecialChar LyX
drastically.
- So if you plan to use PostScript, you can insert your images directly as
- EPS to avoid this problem.
+ So if you plan to use PostScript,
+ you can insert your images directly as EPS to avoid this problem.
\end_layout
\begin_layout Standard
\begin_layout Section
PDF
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
-File Formats ! PDF
+File Formats
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+PDF
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\begin_inset Quotes erd
\end_inset
- implies, it can be processed at any computer system and the printed output
- looks exactly the same.
+ implies,
+ it can be processed at any computer system and the printed output looks exactly the same.
\end_layout
\begin_layout Standard
-PDF can contain images in its own PDF format, in the format
+PDF can contain images in its own PDF format,
+ in the format
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- (JPG, file extension
+ (JPG,
+ file extension
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
-), and in the format
+),
+ and in the format
\begin_inset Quotes eld
\end_inset
\begin_inset Quotes erd
\end_inset
- (PNG, file extension
+ (PNG,
+ file extension
\begin_inset Quotes eld
\end_inset
\end_inset
).
- Nevertheless you can use any other image format, because \SpecialChar LyX
- converts them
- in the background to one of these formats.
- But as described in the section about PostScript, the image conversion
- will slow down your work flow.
- So it is recommended that you use images in one of the three mentioned
- formats.
+ Nevertheless you can use any other image format,
+ because \SpecialChar LyX
+ converts them in the background to one of these formats.
+ But as described in the section about PostScript,
+ the image conversion will slow down your work flow.
+ So it is recommended that you use images in one of the three mentioned formats.
\end_layout
\begin_layout Standard
\family typewriter
dvipdfm
\family default
- that converts your file in the background to DVI and in a second step to
- PDF.
+ that converts your file in the background to DVI and in a second step to PDF.
\end_layout
\begin_layout Description
\family typewriter
pdftex
\family default
- supports all features of actual PDF-versions, is quick and works stable.
+ supports all features of actual PDF-versions,
+ is quick and works stable.
The program
\family typewriter
dvipdfm
\begin_inset CommandInset ref
LatexCommand ref
reference "eq:Wgn"
+nolink "false"
\end_inset
\begin_inset Formula $W_{g\,n}$
\end_inset
- is the given width of all cells,
+ is the given width of all cells,
+
\series bold
\backslash
tabcolsep
\series default
is the \SpecialChar LaTeX
--length between the cell text and the cell border (its default value
- is 6
+-length between the cell text and the cell border (its default value is 6
\begin_inset space \thinspace{}
\end_inset
\backslash
arrayrulewidth
\series default
- is the thickness of the cell border line, the default is 0.4
+ is the thickness of the cell border line,
+ the default is 0.4
\begin_inset space \thinspace{}
\end_inset
\begin_inset CommandInset ref
LatexCommand eqref
reference "eq:Wtot_n"
+nolink "false"
\end_inset
-, the total width of a multicolumn
+,
+ the total width of a multicolumn
\begin_inset Formula $W_{\mathrm{tot\,mult}}$
\end_inset
\begin_inset CommandInset ref
LatexCommand eqref
reference "eq:Wtot_n"
+nolink "false"
\end_inset
\begin_inset CommandInset ref
LatexCommand eqref
reference "eq:Wtot_mult"
+nolink "false"
\end_inset
\emph on
n
\emph default
- columns are spanned, so that each column has a total width of
+ columns are spanned,
+ so that each column has a total width of
\begin_inset Formula $W_{\mathrm{tot\,mult}}/n$
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "latexcompanion"
+literal "true"
\end_inset
-Frank Mittelbach and Michel Goossens:
+Frank Mittelbach and Michel Goossens:
+
\emph on
The \SpecialChar LaTeX
Companion Second Edition.
\emph default
- Addison-Wesley, 2004
+ Addison-Wesley,
+ 2004
\end_layout
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "latexguide"
+literal "true"
\end_inset
Helmut Kopka and Patrick W.
- Daly:
+ Daly:
+
\emph on
A Guide to \SpecialChar LaTeX
Fourth Edition.
\emph default
- Addison-Wesley, 2003
+ Addison-Wesley,
+ 2003
\end_layout
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "latexbook"
+literal "true"
\end_inset
-Leslie Lamport:
+Leslie Lamport:
+
\emph on
\SpecialChar LaTeX
-: A Document Preparation System.
+:
+ A Document Preparation System.
\emph default
- Addison-Wesley, second edition, 1994
+ Addison-Wesley,
+ second edition,
+ 1994
\end_layout
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "arydshln"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "arydshln"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/arydshln/arydshln.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//arydshln/arydshln.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! arydshln
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+arydshln
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "booktabs"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "booktabs"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/booktabs/booktabs.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//booktabs/booktabs.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! booktabs
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+booktabs
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "caption"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "caption"
-target "http://mirrors.ctan.org/macros/latex/contrib/caption/caption-eng.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib/caption/caption-eng.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! caption
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+caption
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "diagbox"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "diagbox"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/diagbox/diagbox.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//diagbox/diagbox.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! diagbox
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+diagbox
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "endfloat"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "endfloat"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/endfloat/endfloat.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//endfloat/endfloat.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! endfloat
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+endfloat
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "footmisc"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "footmisc"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/footmisc/footmisc.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//footmisc/footmisc.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! footmisc
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+footmisc
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "hypcap"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "hypcap"
-target "http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/hypcap.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/hypcap.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! hyperref
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+hyperref
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "hyperref"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "hyperref"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/hyperref/hyperref.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//hyperref/hyperref.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! hyperref
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+hyperref
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "KOMA-Script"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "KOMA-Script"
-target "http://mirror.ctan.org/macros/latex/contrib/koma-script/doc/scrguien.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib/koma-script/doc/scrguien.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! KOMA-Script
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+KOMA-Script
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "lettrine"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "lettrine"
-target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/lettrine.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib/lettrine/doc/lettrine.pdf"
+literal "false"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "example"
-target "http://mirrors.ctan.org/macros/latex/contrib/lettrine/doc/demo.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib/lettrine/doc/demo.pdf"
+literal "false"
\end_inset
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! lettrine
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+lettrine
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "listings"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "listings"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/listings/listings.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//listings/listings.pdf"
+literal "false"
+
+\end_inset
+
+
+\series default
+
+\begin_inset Index idx
+range none
+pageformat default
+status collapsed
+
+\begin_layout Plain Layout
+\SpecialChar LaTeX
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+listings
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Bibliography
+\begin_inset CommandInset bibitem
+LatexCommand bibitem
+key "minted"
+literal "false"
+
+\end_inset
+
+Documentation of the \SpecialChar LaTeX
+-package
+\series bold
+
+\begin_inset CommandInset href
+LatexCommand href
+name "minted"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//minted/minted.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! listings
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+minted
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "marginnote"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "marginnote"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/marginnote/marginnote.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//marginnote/marginnote.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! marginnote
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+marginnote
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "pdfpages"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "pdfpages"
-target "http://www.ctan.org/tex-archive/macros/latex/contrib/pdfpages/pdfpages.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib/pdfpages/pdfpages.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! pdfpages
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+pdfpages
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "prettyref"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "prettyref"
-target "http://www.ctan.org/tex-archive/macros/latex/contrib/prettyref/prettyref.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib/prettyref/prettyref.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! prettyref
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+prettyref
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "pstricks"
+literal "true"
\end_inset
LatexCommand href
name "PSTricks"
target "http://tug.org/PSTricks/"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! PSTricks
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+PSTricks
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "refstyle"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "refstyle"
-target "http://www.ctan.org/tex-archive/macros/latex/contrib/refstyle/refstyle.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib/refstyle/refstyle.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! refstyle
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+refstyle
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_inset CommandInset bibitem
LatexCommand bibitem
key "sidecap"
+literal "true"
\end_inset
\begin_inset CommandInset href
LatexCommand href
name "sidecap"
-target "ftp://tug.ctan.org/pub/tex-archive/macros/latex/contrib/sidecap/sidecap.pdf"
+target "https://www.ctan.org/tex-archive/macros/latex/contrib//sidecap/sidecap.pdf"
+literal "false"
\end_inset
\series default
\begin_inset Index idx
+range none
+pageformat default
status collapsed
\begin_layout Plain Layout
\SpecialChar LaTeX
--packages ! sidecap
+ packages
+\begin_inset IndexMacro subentry
+status open
+
+\begin_layout Plain Layout
+sidecap
+\end_layout
+
+\end_inset
+
+
\end_layout
\end_inset
\begin_layout Bibliography
\begin_inset CommandInset bibitem
LatexCommand bibitem
-key "NewInLyX20"
+key "Inkscape"
+literal "true"
\end_inset
+Documentation of the option
+\begin_inset CommandInset href
+LatexCommand href
+name "Omit text in PDF"
+target "https://www.ctan.org/tex-archive/info/svg-inkscape/InkscapePDFLaTeX.pdf"
+literal "false"
+
+\end_inset
+
+ of the program
+\noun on
\begin_inset CommandInset href
LatexCommand href
-name "Wiki page"
-target "http://wiki.lyx.org/LyX/NewInLyX20"
+name "Inkscape"
+target "https://inkscape.org"
+literal "false"
\end_inset
- about new features in
-\family sans
-\SpecialChar LyX
- 2.0
-\family default
-.
+
\end_layout
\begin_layout Standard
\begin_inset CommandInset index_print
LatexCommand printindex
type "idx"
+name "Index"
+literal "false"
\end_inset
projects / lyx.git / blobdiff