set dummy $ac_prog ; ac_word=$[2]
if test -n "$ac_word"; then
MSG_CHECKING([for \"$ac_word\"],[+])
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -x [$ac_dir/$ac_word]; then
if test -n "[$]$2"; then
ac_result=yes
+ ifelse($4,,,[$4])
else
ac_result=no
fi
- ifelse($4,,,[$4])
MSG_RESULT($ac_result)
test -n "[$]$2" && break
fi
])dnl
dnl
dnl
+dnl LYXRC_VAR(VARIABLE_NAME, VALUE)
+define(LYXRC_VAR,[dnl
+rc_entries="$rc_entries
+$1 \"$2\""])
+dnl
+dnl
+dnl LYXRC_PROG(FEATURE-DESCRIPTION,VARIABLE-NAME,PROGRAMS-LIST,
+dnl ACTION-IF-FOUND,ACTION-IF-NOT-FOUND)
+define(LYXRC_PROG,[dnl
+SEARCH_PROG($1,prog,$3,$4,$5)
+LYXRC_VAR($2,$prog)])
+dnl
+dnl
dnl PROVIDE_DEFAULT_FILE(FILE, DEFAULT-VALUE)
dnl
define(PROVIDE_DEFAULT_FILE,[dnl
-# if $1 does not exist (because LaTeX did not run),
+# if $1 does not exist (because LaTeX did not run),
# then provide a standard version.
if test ! -f $1 ; then
cat >$1 <<EOF
dnl ######### End M4 macros #############################################
+# Be Bourne compatible (taken from autoconf 2.53)
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+
+
+
####some configuration variables
+outfile=lyxrc.defaults
+rc_entries=
lyx_check_config=yes
lyx_keep_temps=no
srcdir=
+version_suffix=
#### Parse the command line
for ac_option do
case "$ac_option" in
-help | --help | -h)
cat << EOF
-Usage: configure [options]
-Options:
+Usage: configure [options]
+Options:
--help show this help lines
--keep-temps keep temporary files (for debug. purposes)
--without-latex-config do not run LaTeX to determine configuration
+ --with-version-suffix=suffix suffix of binary installed files
EOF
exit 0;;
--without-latex-config)
lyx_check_config=no ;;
--keep-temps)
lyx_keep_temps=yes ;;
- esac
+ --with-version-suffix*)
+ version_suffix=`echo "$ac_option" | sed 's,--with-version-suffix=,,'`
+ esac
done
changequote([,])dnl
ac_prog=[$]0
changequote(,)dnl
-srcdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+srcdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
test "x$srcdir" = "x$ac_prog" && srcdir=.
if test ! -r ${srcdir}/chkconfig.ltx ; then
exit 1
fi
+#### Adjust PATH for Win32 (Cygwin)
+case `uname -s` in
+ CYGWIN*)
+ tmpfname="/tmp/x$$.ltx";
+ echo "\\documentstyle{article}" > $tmpfname
+ echo "\\begin{document}\\end{document}" >> $tmpfname
+ inpname=`cygpath -w $tmpfname | tr '\\\\' /`
+ echo "\\input{$inpname}" > wrap_temp$$.ltx
+ check_err=`latex wrap_temp$$.ltx 2>&1 < /dev/null | grep Error`
+ rm -f wrap_temp$$.* /tmp/x$$.*
+ if [ x"$check_err" = "x" ]
+ then
+ echo "configure: cygwin detected; path correction"
+ srcdir=`cygpath -w "${srcdir}" | tr '\\\\' /`
+ echo "srcdir=${srcdir}"
+ else
+ echo "configure: cygwin detected; path correction is not needed"
+ fi
+ ;;
+esac
#### Create the build directories if necessary
-for dir in bind clipart doc examples images kbd layouts reLyX \
- scripts templates ui ; do
+for dir in bind clipart doc examples help images kbd layouts reLyX \
+ scripts templates ui xfonts; do
test ! -d $dir && mkdir $dir
done
\\@@end
EOF
if eval ${LATEX} chklatex.ltx </dev/null 2>/dev/null \
- | grep 'ThisIsLaTeX2e' >/dev/null; then
+ | grep 'ThisIsLaTeX2e' >/dev/null; then
:
else
LATEX=
rm -f chklatex.ltx chklatex.log])dnl
dnl
# Search LaTeX2e
-SEARCH_PROG([for a LaTeX2e program],LATEX,latex latex2e,CHECKLATEX2E,dnl
+SEARCH_PROG([for a LaTeX2e program],LATEX,pplatex latex2e latex,CHECKLATEX2E,dnl
[lyx_check_config=no])
-if test x$lyx_check_config != x ; then
-SEARCH_PROG([for the pdflatex program],PDFLATEX,pdflatex,CHECKLATEX2E)
+latex_to_dvi=$LATEX
+test -z "$latex_to_dvi" && latex_to_dvi="none"
+
+# Search for pdflatex
+if test ${lyx_check_config} = no ; then
+ latex_to_pdf=none
+else
+ SEARCH_PROG([for the pdflatex program],latex_to_pdf,pdflatex)
fi
+test $latex_to_dvi != "none" && latex_to_dvi="$latex_to_dvi \$\$i"
+test $latex_to_pdf != "none" && latex_to_pdf="$latex_to_pdf \$\$i"
+
+SEARCH_PROG([for a TGIF viewer and editor], TGIF_EDITOR, tgif)
+TGIF_VIEWER="$TGIF_EDITOR"
+
+SEARCH_PROG([for a FIG viewer and editor], FIG_EDITOR, xfig)
+FIG_VIEWER="$FIG_EDITOR"
+
+SEARCH_PROG([for a FEN viewer and editor], FEN_EDITOR, xboard)
+test "$FEN" = "xboard" && FEN_EDITOR="xboard -lpf \$\$i -mode EditPosition"
+FEN_VIEWER="$FEN_EDITOR"
+
+SEARCH_PROG([for a raster image viewer], RASTERIMAGE_VIEWER, xv kview gimp)
+
+SEARCH_PROG([for a raster image editor], RASTERIMAGE_EDITOR, gimp)
+
# Search for an installed reLyX or a ready-to-install one
save_PATH=${PATH}
PATH=${PATH}:./reLyX/
SEARCH_PROG([for a LaTeX -> LyX converter],tex_to_lyx_command,reLyX)
PATH=${save_PATH}
-test $tex_to_lyx_command = "reLyX" && tex_to_lyx_command="reLyX -f \$\$FName"
+test $tex_to_lyx_command = "reLyX" && tex_to_lyx_command="reLyX -f \$\$i"
+tex_to_lyx_command=`echo $tex_to_lyx_command | sed "s,reLyX,reLyX$version_suffix,"`
SEARCH_PROG([for a Noweb -> LyX converter],literate_to_lyx_command,noweb2lyx)
-test $literate_to_lyx_command = "noweb2lyx" && literate_to_lyx_command="noweb2lyx \$\$FName \$\$OutName"
+test $literate_to_lyx_command = "noweb2lyx" && literate_to_lyx_command="noweb2lyx \$\$i \$\$o"
+literate_to_lyx_command=`echo $literate_to_lyx_command | sed "s,noweb2lyx,noweb2lyx$version_suffix,"`
# Search something to process a literate document
SEARCH_PROG([for a Noweb -> LaTeX converter],literate_to_tex_command,noweave)
-test $literate_to_tex_command = "noweave" && literate_to_tex_command="noweave -delay -index \$\$FName > \$\$OutName"
+test $literate_to_tex_command = "noweave" && literate_to_tex_command="noweave -delay -index \$\$i > \$\$o"
SEARCH_PROG([for a HTML -> Latex converter],html_to_latex_command,html2latex)
-test $html_to_latex_command = "html2latex" && html_to_latex_command="html2latex \$\$FName"
+test $html_to_latex_command = "html2latex" && html_to_latex_command="html2latex \$\$i"
-SEARCH_PROG([for Image converter],image_command,convert)
-test $image_command = "convert" && image_command="convert \$\$FName \$\$OutName"
+SEARCH_PROG([for a MSWord -> Latex converter],word_to_latex_command,wvCleanLatex word2x)
+test "$word_to_latex_command" = "wvCleanLatex" && word_to_latex_command="wvCleanLatex \$\$i \$\$o"
+test "$word_to_latex_command" = "word2x" && word_to_latex_command="word2x -f latex \$\$i"
-# Search for a Postscript interpreter
-SEARCH_PROG([for a Postscript interpreter],GS, gs)
+SEARCH_PROG([for Image converter],image_command,convert)
+test $image_command = "convert" && image_command="convert \$\$i \$\$o"
# Search something to preview postscript
-SEARCH_PROG([for a Postscript previewer],GHOSTVIEW,gv ghostview)
+SEARCH_PROG([for a Postscript previewer],GHOSTVIEW,gsview32 gv ghostview)
+case $GHOSTVIEW in
+ gv|ghostview) PS_VIEWER="$GHOSTVIEW -swap" ;;
+ *) PS_VIEWER="$GHOSTVIEW";;
+esac
+EPS_VIEWER=$GHOSTVIEW
# Search for a program to preview pdf
-SEARCH_PROG([for a PDF preview],PDF_VIEWER,acroread gv ghostview xpdf)
+SEARCH_PROG([for a PDF preview],PDF_VIEWER, acrobat acrord32 gsview32 acroread gv ghostview xpdf)
# Search something to preview dvi
-SEARCH_PROG([for a DVI previewer],DVI_VIEWER, xdvi)
+SEARCH_PROG([for a DVI previewer],DVI_VIEWER, xdvi windvi yap)
# Search something to preview html
-SEARCH_PROG([for a HTML previewer],HTML_VIEWER, netscape)
+SEARCH_PROG([for a HTML previewer],HTML_VIEWER, "mozilla file://\$\$p\$\$i" netscape)
# Search for a program to convert ps to pdf
SEARCH_PROG([for a PS to PDF converter],ps_to_pdf_command,ps2pdf)
-test $ps_to_pdf_command = "ps2pdf" && ps_to_pdf_command="ps2pdf \$\$FName"
+test $ps_to_pdf_command = "ps2pdf" && ps_to_pdf_command="ps2pdf -dCompatibilityLevel=1.3 \$\$i"
# Search for a program to convert dvi to ps
SEARCH_PROG([for a DVI to PS converter],dvi_to_ps_command,dvips)
-test $dvi_to_ps_command = "dvips" && dvi_to_ps_command="dvips -o \$\$OutName \$\$FName"
+test $dvi_to_ps_command = "dvips" && dvi_to_ps_command="dvips -o \$\$o \$\$i"
+
+# Search for a program to convert dvi to pdf
+SEARCH_PROG([for a DVI to PDF converter],dvi_to_pdf_command,dvipdfm)
+test $dvi_to_pdf_command = "dvipdfm" && dvi_to_pdf_command="dvipdfm \$\$i"
+
+# We have a script to convert previewlyx to ppm
+lyxpreview_to_bitmap_command='$$s/lyxpreview2bitmap.sh'
# Search a *roff program (used to translate tables in ASCII export)
-SEARCH_PROG([for a *roff formatter],ROFF,groff nroff)
-ascii_roff_command=$ROFF
-test $ROFF = "groff" && ascii_roff_command="groff -t -Tlatin1 \$\$FName"
-test $ROFF = "nroff" && ascii_roff_command="tbl \$\$FName | nroff"
+LYXRC_PROG([for a *roff formatter], \ascii_roff_command, dnl
+ 'groff -t -Tlatin1 $$FName' nroff,dnl
+ test "$prog" = "nroff" && prog='tbl $$FName | nroff')
# Search the ChkTeX program
-SEARCH_PROG([for ChkTeX],CHKTEX,chktex)
-chktex_command=$CHKTEX
-test $CHKTEX = "chktex" && chktex_command="$CHKTEX -n1 -n3 -n6 -n9 -n22 -n25 -n30 -n38"
+LYXRC_PROG([for ChkTeX], \chktex_command,dnl
+ "chktex -n1 -n3 -n6 -n9 -n22 -n25 -n30 -n38")
# Search for a spellchecker
-SEARCH_PROG([for a spell-checker], SPELL,ispell)
-
-# Search a Fax handling program
-SEARCH_PROG([for a fax driver], FAX, sendfax faxsend fax)
-if test $FAX = sendfax ; then
- fax_command="sendfax -n -h '\$\$Host' -c '\$\$Comment' -x '\$\$Enterprise' -d '\$\$Name'@'\$\$Phone' '\$\$FName'"
-elif test $FAX = faxsend ; then
- fax_command="faxsend '\$\$Phone' '\$\$FName'"
-elif test $FAX = fax ; then
- fax_command="fax send '\$\$Phone' '\$\$FName'"
-else
- fax_command="none"
-fi
+LYXRC_PROG([for a spell-checker], \spell_command, ispell)
+
+# Search for computer algebra systems
+SEARCH_PROG([for Octave],OCTAVE,octave)
+SEARCH_PROG([for Maple],MAPLE,maple)
+
+dnl # Search a Fax handling program
+dnl SEARCH_PROG([for a fax driver], FAX, sendfax faxsend fax)
+dnl if test $FAX = sendfax ; then
+dnl fax_command="sendfax -n -h '\$\$Host' -c '\$\$Comment' -x '\$\$Enterprise' -d '\$\$Name'@'\$\$Phone' '\$\$FName'"
+dnl elif test $FAX = faxsend ; then
+dnl fax_command="faxsend '\$\$Phone' '\$\$FName'"
+dnl elif test $FAX = fax ; then
+dnl fax_command="fax send '\$\$Phone' '\$\$FName'"
+dnl else
+dnl fax_command="none"
+dnl fi
+
+# Search a GUI Fax program
+SEARCH_PROG([for a fax program], fax_command, kdeprintfax ksendfax)
+test $fax_command != "none" && fax_command="$fax_command \$\$i"
# Search for LinuxDoc support
SEARCH_PROG([for SGML-tools 1.x (LinuxDoc)], LINUXDOC, sgml2lyx)
-chk_linuxdoc=no
if test $LINUXDOC != none; then
chk_linuxdoc=yes
+ bool_linuxdoc=true
linuxdoc_cmd="\\def\\haslinuxdoc{yes}"
+else
+ chk_linuxdoc=no
+ bool_linuxdoc=false
fi
case $LINUXDOC in
sgml2lyx)
- linuxdoc_to_latex_command="sgml2latex \$\$FName"
- linuxdoc_to_dvi_command="sgml2latex -o dvi \$\$FName"
- linuxdoc_to_html_command="sgml2html \$\$FName"
- linuxdoc_to_lyx_command="sgml2lyx \$\$FName";;
+ linuxdoc_to_latex_command="sgml2latex \$\$i"
+ linuxdoc_to_dvi_command="sgml2latex -o dvi \$\$i"
+ linuxdoc_to_html_command="sgml2html \$\$i"
+ linuxdoc_to_lyx_command="sgml2lyx \$\$i";;
none)
linuxdoc_to_latex_command="none"
linuxdoc_to_dvi_command="none"
# Search for DocBook support
SEARCH_PROG([for SGML-tools 2.x (DocBook) or db2x scripts], DOCBOOK, sgmltools db2dvi)
-chk_docbook=no
if test $DOCBOOK != none; then
chk_docbook=yes
+ bool_docbook=true
docbook_cmd="\\def\\hasdocbook{yes}"
+else
+ chk_docbook=no
+ bool_docbook=false
fi
case $DOCBOOK in
sgmltools)
- docbook_to_dvi_command="sgmltools -b dvi \$\$FName"
- docbook_to_html_command="sgmltools -b html \$\$FName";;
+ docbook_to_dvi_command="sgmltools -b dvi \$\$i"
+ docbook_to_html_command="sgmltools -b html \$\$i";;
db2dvi)
- docbook_to_dvi_command="db2dvi \$\$FName"
- docbook_to_html_command="db2html \$\$FName";;
+ docbook_to_dvi_command="db2dvi \$\$i"
+ docbook_to_html_command="db2html \$\$i";;
none)
docbook_to_dvi_command="none"
docbook_to_html_command="none";;
esac
# Search for a spool command
-SEARCH_PROG([for a spool command], LPR, lp lpr)
-case $LPR in
- lp) print_spool_command=lp
- print_spool_printerprefix="-d ";;
- lpr) print_spool_command=lpr
- print_spool_printerprefix="-P";;
+LYXRC_PROG([for a spool command], \print_spool_command, lp lpr)
+case $prog in
+ lp) print_spool_printerprefix="-d ";;
+ lpr) print_spool_printerprefix="-P";;
*) :;; # leave to empty values
esac
+LYXRC_VAR(\print_spool_printerprefix, $print_spool_printerprefix)
SEARCH_PROG([for a LaTeX -> HTML converter], TOHTML, tth latex2html hevea)
-latex_to_html_command = $TOHTML
+latex_to_html_command=$TOHTML
case $TOHTML in
- tth) latex_to_html_command="tth -t -e2 -L\$\$BaseName < \$\$FName > \$\$OutName";;
- latex2html) latex_to_html_command="latex2html -no_subdir -split 0 -show_section_numbers \$\$FName";;
- hevea) latex_to_html_command="hevea -s \$\$FName";;
+ tth) latex_to_html_command="tth -t -e2 -L\$\$b < \$\$i > \$\$o";;
+ latex2html) latex_to_html_command="latex2html -no_subdir -split 0 -show_section_numbers \$\$i";;
+ hevea) latex_to_html_command="hevea -s \$\$i";;
esac
#### Explore the LaTeX configuration
rm -f textclass.lst packages.lst chkconfig.sed
if test ${lyx_check_config} = no ; then
MSG_RESULT(default values)
+ MSG_CHECKING(list of textclasses,+)
+ cat >textclass.lst <<EOF
+# This file declares layouts and their associated definition files
+# (include dir. relative to the place where this file is).
+# It contains only default values, since chkconfig.ltx could not be run
+# for some reason. Run ./configure if you need to update it after a
+# configuration change.
+EOF
+ # build the list of available layout files and convert it to commands
+ # for chkconfig.ltx
+ for file in ./layouts/*.layout ${srcdir}/layouts/*.layout ; do
+ case $file in
+ */\*.layout) ;;
+ *) if test -r "$file" ; then
+ class=`echo $file | sed -e 's%^.*layouts/\(.*\)\.layout$%\1%'`
+ cleanclass=`echo $class | tr ' -' '__'`
+changequote([,])dnl
+ # make sure the same class is not considered twice
+ if test x`[eval] echo $ac_n '${found_'$cleanclass'}'` = x ; then
+ [eval] "found_$cleanclass=yes"
+changequote(,)dnl
+ # The sed commands below are a bit scary. Here is what they do:
+ # 1-3: remove the \DeclareFOO macro and add the correct boolean
+ # at the end of the line telling whether the class is
+ # available
+ # 4: if the macro had an optional argument with several
+ # parameters, only keep the first one
+ # 5: if the macro did not have an optional argument, provide one
+ # (equal to the class name)
+ # 6: remove brackets and replace with correctly quoted entries
+ grep '\\Declare\(LaTeX\|DocBook\|LinuxDoc\)Class' "$file" \
+ | sed -e 's/^.*\DeclareLaTeXClass *\(.*\)/\1 "false"/' \
+ -e 's/^.*\DeclareDocBookClass *\(.*\)/\1 "'$bool_docbook'"/' \
+ -e 's/^.*\DeclareLinuxDocClass *\(.*\)/\1 "'$bool_linuxdoc'"/' \
+ -e 's/\[\([^,]*\),[^]]*\]/[\1]/' \
+ -e 's/^{/['$class']{/' \
+ -e 's/\[\([^]]*\)\] *{\([^}]*\)}/"'$class'" "\1" "\2"/' \
+ >>textclass.lst
+ fi
+ fi ;;
+ esac
+ done
+ MSG_RESULT(done)
else
MSG_RESULT(auto)
rm -f wrap_chkconfig.ltx chkconfig.vars chkconfig.classes chklayouts.tex
\\input{${srcdir}/chkconfig.ltx}
EOF
## Construct the list of classes to test for.
- # build the list of available layout files and convert it to commands
- # for chkconfig.ltx
- for file in ./layouts/*.layout ${srcdir}/layouts/*.layout ; do
+ # build the list of available layout files and convert it to commands
+ # for chkconfig.ltx
+ for file in ./layouts/*.layout ${srcdir}/layouts/*.layout ; do
case $file in
*/\*.layout) ;;
*) test -r "$file" && echo $file ;;
esac
done | sed -e 's%^.*layouts/\(.*\)\.layout$%\\TestDocClass{\1}%'\
- > chklayouts.tex
+ > chklayouts.tex
changequote([,])dnl
[eval] ${LATEX} wrap_chkconfig.ltx 2>/dev/null | grep '^\+'
[eval] `cat chkconfig.vars | sed 's/-/_/g'`
# Do we have all the files we need? Useful if latex did not run
changequote([,])dnl
-echo creating textclass.lst
-PROVIDE_DEFAULT_FILE(textclass.lst,dnl
-[# This file declares layouts and their associated definition files
-# (include dir. relative to the place where this file is).
-# It contains only default values, since chkconfig.ltx could not be run
-# for some reason. Run ./configure if you need to update it after a
-# configuration change.
-article article article
-report report report
-book book book
-linuxdoc linuxdoc linuxdoc
-letter letter letter])
PROVIDE_DEFAULT_FILE(chkconfig.sed,[s/@.*@/???/g])
-echo creating packages.lst
+echo "creating packages.lst"
PROVIDE_DEFAULT_FILE(packages.lst,dnl
[# This file should contain the list of LaTeX packages that have been
# recognized by LyX. Unfortunately, since configure could not find
])
changequote(,)dnl
-echo creating doc/LaTeXConfig.lyx
+echo "creating doc/LaTeXConfig.lyx"
echo "s/@chk_linuxdoc@/$chk_linuxdoc/g" >> chkconfig.sed
echo "s/@chk_docbook@/$chk_docbook/g" >> chkconfig.sed
sed -f chkconfig.sed ${srcdir}/doc/LaTeXConfig.lyx.in >doc/LaTeXConfig.lyx
-echo creating lyxrc.defaults
-rm -f lyxrc.defaults
-cat >lyxrc.defaults <<EOF
+echo "creating $outfile"
+cat >$outfile <<EOF
# This file has been automatically generated by LyX' lib/configure
# script. It contains default settings that have been determined by
# examining your system. PLEASE DO NOT MODIFY ANYTHING HERE! If you
# want to customize LyX, make a copy of the file LYXDIR/lyxrc as
# ~/.lyx/lyxrc and edit this file instead. Any setting in lyxrc will
# override the values given here.
-\\Format latex tex LaTeX L
-\\Format dvi dvi DVI D
-\\Format ps ps Postscript t
-\\Format pdf pdf PDF P
-\\Format html html HTML H
-\\Format text txt ASCII A
-\\Format literate nw NoWeb W
-\\Format linuxdoc sgml LinuxDoc x
-\\Format docbook sgml DocBook B
-\\Format program run Program r
-
-\\converter latex lyx "$tex_to_lyx_command" ""
-\\converter latex dvi "$LATEX" "latex,disable=linuxdoc&docbook"
-\\converter latex pdf "$PDFLATEX" "latex,disable=linuxdoc&docbook"
-\\converter latex html "$latex_to_html_command"
- "originaldir,needaux,disable=linuxdoc&docbook"
-\\converter literate lyx "$literate_to_lyx_command" ""
-\\converter literate latex "$literate_to_tex_command" ""
-\\converter dvi ps "$dvi_to_ps_command" ""
-\\converter ps pdf "$ps_to_pdf_command" ""
-\\converter linuxdoc lyx "$linuxdoc_to_lyx_command" ""
-\\converter linuxdoc latex "$linuxdoc_to_latex_command" ""
-\\converter linuxdoc dvi "$linuxdoc_to_dvi_command" ""
-\\converter linuxdoc html "$linuxdoc_to_html_command" ""
-\\converter docbook dvi "$docbook_to_dvi_command" ""
-\\converter docbook html "$docbook_to_html_command" ""
-\\converter html latex "$html_to_latex_command"
- "disable=latex&literate&linuxdoc&docbook"
-
-\converter gif eps "$image_command" ""
-\converter png eps "$image_command" ""
-\converter jpg eps "$image_command" ""
-\converter gif png "$image_command" ""
-
-\\viewer dvi "$DVI_VIEWER"
-\\viewer html "$HTML_VIEWER"
-\\viewer pdf "$PDF_VIEWER"
-\\viewer ps "$GHOSTVIEW -swap"
-\\viewer eps "$GHOSTVIEW"
-
-\\ps_command "$GS"
-\\ascii_roff_command "$ascii_roff_command"
-\\chktex_command "$chktex_command"
-\\spell_command "$SPELL"
-\\fax_command "$fax_command"
-\\print_spool_command "$print_spool_command"
-\\print_spool_printerprefix "$print_spool_printerprefix"
+\\Format asciichess asc "ASCII (chess output)" "" "" ""
+\\Format asciiimage asc "ASCII (image)" "" "" ""
+\\Format asciixfig asc "ASCII (xfig output)" "" "" ""
+\\Format agr agr GRACE "" "" ""
+\\Format bmp bmp BMP "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format date "" "date command" "" "" ""
+\\Format dateout tmp "date (output)" "" "" ""
+\\Format docbook sgml DocBook B "" ""
+\\Format dvi dvi DVI D "$DVI_VIEWER" ""
+\\Format eps eps EPS "" "$EPS_VIEWER" ""
+\\Format fax "" Fax "" "" ""
+\\Format fen fen FEN "" "$FEN_VIEWER" "$FEN_EDITOR"
+\\Format fig fig XFig "" "$FIG_VIEWER" "$FIG_EDITOR"
+\\Format gif gif GIF "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format html html HTML H "$HTML_VIEWER" ""
+\\Format jpg jpg JPG "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format latex tex LaTeX L "" ""
+\\Format linuxdoc sgml LinuxDoc x "" ""
+\\Format lyx lyx LyX "" "" ""
+\\Format lyxpreview lyxpreview "LyX Preview" "" "" ""
+\\Format literate nw NoWeb N "" ""
+\\Format pbm pbm PBM "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format pdf pdf "PDF (ps2pdf)" P "$PDF_VIEWER" ""
+\\Format pdf2 pdf "PDF (pdflatex)" F "$PDF_VIEWER" ""
+\\Format pdf3 pdf "PDF (dvipdfm)" m "$PDF_VIEWER" ""
+\\Format pdftex pdftex_t PDFTEX "" "" ""
+\\Format pgm pgm PGM "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format png png PNG "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format ppm ppm PPM "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format program "" Program "" "" ""
+\\Format ps ps Postscript t "$PS_VIEWER" ""
+\\Format pstex pstex_t PSTEX "" "" ""
+\\Format text txt ASCII A "" ""
+\\Format textparagraph txt "ASCII (paragraphs)" "" "" ""
+\\Format tgif obj TGIF "" "$TGIF_VIEWER" "$TGIF_EDITOR"
+\\Format tiff tif TIFF "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format word doc Word W "" ""
+\\Format xbm xbm XBM "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+\\Format xpm xpm XPM "" "$RASTERIMAGE_VIEWER" "$RASTERIMAGE_EDITOR"
+
+\\converter date dateout "date +%d-%m-%Y > \$\$o" ""
+\\converter docbook dvi "$docbook_to_dvi_command" ""
+\\converter docbook html "$docbook_to_html_command" ""
+\\converter dvi pdf3 "$dvi_to_pdf_command" ""
+\\converter dvi ps "$dvi_to_ps_command" ""
+\\converter fen asciichess "python \$\$s/fen2ascii.py \$\$i \$\$o" ""
+\\converter fig pdftex "sh \$\$s/fig2pdftex.sh \$\$i \$\$o" ""
+\\converter fig pstex "sh \$\$s/fig2pstex.sh \$\$i \$\$o" ""
+\\converter html latex "$html_to_latex_command" ""
+\\converter latex html "$latex_to_html_command" "originaldir,needaux"
+\\converter latex dvi "$latex_to_dvi" "latex"
+\\converter latex lyx "$tex_to_lyx_command" ""
+\\converter latex pdf2 "$latex_to_pdf" "latex"
+\\converter linuxdoc dvi "$linuxdoc_to_dvi_command" ""
+\\converter linuxdoc html "$linuxdoc_to_html_command" ""
+\\converter linuxdoc latex "$linuxdoc_to_latex_command" ""
+\\converter linuxdoc lyx "$linuxdoc_to_lyx_command" ""
+\\converter literate latex "$literate_to_tex_command" ""
+\\converter literate lyx "$literate_to_lyx_command" ""
+\\converter lyxpreview ppm "$lyxpreview_to_bitmap_command" ""
+\\converter ps fax "$fax_command" ""
+\\converter ps pdf "$ps_to_pdf_command" ""
+\\converter word latex "$word_to_latex_command" ""
+EOF
+
+### the graphic converter part with the predefined ones
+#### Search for the nonstandard converting progs
+#
+SEARCH_PROG([for an FIG -> EPS/PPM converter], FIG2DEV, fig2dev)
+if test "$FIG2DEV" = "fig2dev"; then
+cat >>$outfile <<EOF
+\\converter fig eps "fig2dev -L eps \$\$i \$\$o" ""
+\\converter fig ppm "fig2dev -L ppm \$\$i \$\$o" ""
+\\converter fig png "fig2dev -L png \$\$i \$\$o" ""
+EOF
+fi
+
+SEARCH_PROG([for an TIFF -> PS converter], TIFF2PS, tiff2ps)
+if test "$TIFF2PS" = "tiff2ps"; then
+cat >>$outfile <<EOF
+\\converter tiff eps "tiff2ps \$\$i > \$\$o" ""
+EOF
+fi
+
+SEARCH_PROG([for an TGIF -> EPS/PPM converter], TGIF, tgif)
+if test "$TGIF" = "tgif"; then
+cat >>$outfile <<EOF
+\\converter tgif eps "tgif -stdout -print -color -eps \$\$i > \$\$o" ""
+\\converter tgif pdf "tgif -stdout -print -color -pdf \$\$i > \$\$o" ""
+EOF
+fi
+
+SEARCH_PROG([for an EPS -> PDF converter], EPSTOPDF, epstopdf)
+if test "$EPSTOPDF" = "epstopdf"; then
+cat >>$outfile <<EOF
+\\converter eps pdf "epstopdf --outfile=\$\$o \$\$i" ""
+EOF
+fi
+
+#### Add Grace conversions (xmgrace needs an Xserver, gracebat doesn't.)
+SEARCH_PROG([for a Grace -> Image converter], GRACE, gracebat)
+if test "$GRACE" = "gracebat"; then
+cat >>$outfile <<EOF
+\\converter agr eps "gracebat -hardcopy -printfile \$\$o -hdevice EPS \$\$i 2>/dev/null" ""
+\\converter agr png "gracebat -hardcopy -printfile \$\$o -hdevice PNG \$\$i 2>/dev/null" ""
+\\converter agr jpg "gracebat -hardcopy -printfile \$\$o -hdevice JPEG \$\$i 2>/dev/null" ""
+\\converter agr ppm "gracebat -hardcopy -printfile \$\$o -hdevice PNM \$\$i 2>/dev/null" ""
+EOF
+fi
+
+cat >>$outfile <<EOF
+
+$rc_entries
\\font_encoding "$chk_fontenc"
EOF
+######## X FONTS
+# create a fonts.dir file to make X fonts available to LyX
+echo "checking for TeX fonts"
+
+fontlist="cmex10 cmmi10 cmr10 cmsy10 eufm10 msam10 msbm10 wasy10"
+rm -f xfonts/fonts.dir xfonts/fonts.scale xfonts/tmpfonts
+
+num=0
+touch xfonts/tmpfonts
+for font in $fontlist ; do
+ MSG_CHECKING(for $font,+)
+ result=no
+ for ext in pfb pfa ttf ; do
+ if filepath=`kpsewhich $font.$ext` ; then
+ result="yes ($ext)"
+ rm -f xfonts/$font.$ext
+ ln -s $filepath xfonts 2>/dev/null
+ echo "$font.$ext -unknown-$font-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific" >>xfonts/tmpfonts
+ num=`expr $num + 1`
+ break
+ fi
+ done
+ MSG_RESULT($result)
+done
+
+if test ! $num = 0 ; then
+ echo $num >xfonts/fonts.scale
+ cat xfonts/tmpfonts >>xfonts/fonts.scale
+ cp xfonts/fonts.scale xfonts/fonts.dir
+ # create a resource list file for Display Postscript
+ (cd xfonts ; rm -f PSres.upr ; makepsres) 2>/dev/null || true
+fi
+rm -f xfonts/tmpfonts
+
+
# Remove superfluous files if we are not writing in the main lib
-# directory
-for file in lyxrc.defaults textclass.lst packages.lst \
- doc/LaTeXConfig.lyx ; do
+# directory
+for file in $outfile textclass.lst packages.lst \
+ doc/LaTeXConfig.lyx xfonts/fonts.dir ; do
# we rename the file first, so that we avoid comparing a file with itself
mv $file $file.new
- if test -r $srcdir/$file && diff $file.new $srcdir/$file >/dev/null 2>/dev/null ;
- then
+ if test -r $srcdir/$file && diff $file.new $srcdir/$file >/dev/null 2>/dev/null ;
+ then
echo "removing $file, which is identical to the system global version"
rm -f $file.new
else
mv $file.new $file
fi
done
-
+if test ! -r xfonts/fonts.dir ; then
+ echo "removing font links"
+ rm -f xfonts/*.pfb xfonts/fonts.scale
+fi
# Final clean-up
if test $lyx_keep_temps = no ; then