lyx_check_config=yes
lyx_keep_temps=no
srcdir=
+lyx_suffix=
#### Parse the command line
for ac_option do
--help show this help lines
--keep-temps keep temporary files (for debug. purposes)
--without-latex-config do not run LaTeX to determine configuration
+ --with-lyx-suffix=suffix suffix of binary installed files
EOF
exit 0;;
--without-latex-config)
lyx_check_config=no ;;
--keep-temps)
lyx_keep_temps=yes ;;
+ --with-lyx-suffix*)
+ lyx_suffix=`echo "$ac_option" | sed 's,--with-lyx-suffix=,,;s,^,-,'`
esac
done
exit 1
fi
+#### Adjust PATH for Win32 (Cygwin)
+if test "x$OSTYPE" = xcygwin; then
+ echo "configure: cygwin detected; path correction"
+ srcdir=`cygpath -w "${srcdir}" | tr '\\\\' /`
+ echo "srcdir=${srcdir}"
+fi
#### Create the build directories if necessary
for dir in bind clipart doc examples images kbd layouts reLyX \
# Search for an installed reLyX or a ready-to-install one
save_PATH=${PATH}
PATH=${PATH}:./reLyX/
-echo $ac_n "checking for reLyX LaTeX-to-LyX translator""... $ac_c"
+echo $ac_n "checking for a LaTeX -> LyX converter""... $ac_c"
echo "$ac_t""(reLyX)"
-RELYX=
+tex_to_lyx_command=
for ac_prog in reLyX
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -x $ac_dir/$ac_word; then
- RELYX="$ac_prog"
+ tex_to_lyx_command="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
- if test -n "$RELYX"; then
+ if test -n "$tex_to_lyx_command"; then
ac_result=yes
else
ac_result=no
fi
echo "$ac_t""$ac_result"
- test -n "$RELYX" && break
+ test -n "$tex_to_lyx_command" && break
fi
done
-if test -z "$RELYX" ; then
- RELYX=none
+if test -z "$tex_to_lyx_command" ; then
+ tex_to_lyx_command=none
fi
PATH=${save_PATH}
+test $tex_to_lyx_command = "reLyX" && tex_to_lyx_command="reLyX -f \$\$i"
+tex_to_lyx_command=`echo $tex_to_lyx_command | sed "s,reLyX,reLyX$lyx_suffix,"`
+
+echo $ac_n "checking for a Noweb -> LyX converter""... $ac_c"
+echo "$ac_t""(noweb2lyx)"
+literate_to_lyx_command=
+for ac_prog in noweb2lyx
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog ; ac_word=$2
+if test -n "$ac_word"; then
+ echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -x $ac_dir/$ac_word; then
+ literate_to_lyx_command="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+
+ if test -n "$literate_to_lyx_command"; then
+ ac_result=yes
+ else
+ ac_result=no
+ fi
+
+ echo "$ac_t""$ac_result"
+ test -n "$literate_to_lyx_command" && break
+fi
+done
+
+if test -z "$literate_to_lyx_command" ; then
+ literate_to_lyx_command=none
+fi
+
+test $literate_to_lyx_command = "noweb2lyx" && literate_to_lyx_command="noweb2lyx \$\$i \$\$o"
+literate_to_lyx_command=`echo $literate_to_lyx_command | sed "s,noweb2lyx,noweb2lyx$lyx_suffix,"`
# Search something to process a literate document
-echo $ac_n "checking for a Literate programming processor""... $ac_c"
+echo $ac_n "checking for a Noweb -> LaTeX converter""... $ac_c"
echo "$ac_t""(noweave)"
-LITERATE=
+literate_to_tex_command=
for ac_prog in noweave
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -x $ac_dir/$ac_word; then
- LITERATE="$ac_prog"
+ literate_to_tex_command="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+
+ if test -n "$literate_to_tex_command"; then
+ ac_result=yes
+ else
+ ac_result=no
+ fi
+
+ echo "$ac_t""$ac_result"
+ test -n "$literate_to_tex_command" && break
+fi
+done
+
+if test -z "$literate_to_tex_command" ; then
+ literate_to_tex_command=none
+fi
+
+test $literate_to_tex_command = "noweave" && literate_to_tex_command="noweave -delay -index \$\$i > \$\$o"
+
+echo $ac_n "checking for a HTML -> Latex converter""... $ac_c"
+echo "$ac_t""(html2latex)"
+html_to_latex_command=
+for ac_prog in html2latex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog ; ac_word=$2
+if test -n "$ac_word"; then
+ echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -x $ac_dir/$ac_word; then
+ html_to_latex_command="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+
+ if test -n "$html_to_latex_command"; then
+ ac_result=yes
+ else
+ ac_result=no
+ fi
+
+ echo "$ac_t""$ac_result"
+ test -n "$html_to_latex_command" && break
+fi
+done
+
+if test -z "$html_to_latex_command" ; then
+ html_to_latex_command=none
+fi
+
+test $html_to_latex_command = "html2latex" && html_to_latex_command="html2latex \$\$i"
+
+echo $ac_n "checking for a MSWord -> Latex converter""... $ac_c"
+echo "$ac_t""(wvCleanLatex word2x)"
+word_to_latex_command=
+for ac_prog in wvCleanLatex word2x
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog ; ac_word=$2
+if test -n "$ac_word"; then
+ echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -x $ac_dir/$ac_word; then
+ word_to_latex_command="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+
+ if test -n "$word_to_latex_command"; then
+ ac_result=yes
+ else
+ ac_result=no
+ fi
+
+ echo "$ac_t""$ac_result"
+ test -n "$word_to_latex_command" && break
+fi
+done
+
+if test -z "$word_to_latex_command" ; then
+ word_to_latex_command=none
+fi
+
+test "$word_to_latex_command" = "wvCleanLatex" && word_to_latex_command="wvCleanLatex \$\$i \$\$o"
+test "$word_to_latex_command" = "word2x" && word_to_latex_command="word2x -f latex \$\$i"
+
+echo $ac_n "checking for Image converter""... $ac_c"
+echo "$ac_t""(convert)"
+image_command=
+for ac_prog in convert
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog ; ac_word=$2
+if test -n "$ac_word"; then
+ echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -x $ac_dir/$ac_word; then
+ image_command="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
- if test -n "$LITERATE"; then
+ if test -n "$image_command"; then
ac_result=yes
else
ac_result=no
fi
echo "$ac_t""$ac_result"
- test -n "$LITERATE" && break
+ test -n "$image_command" && break
fi
done
-if test -z "$LITERATE" ; then
- LITERATE=none
+if test -z "$image_command" ; then
+ image_command=none
fi
-test $LITERATE = "noweave" && LITERATE="noweave -delay -index \$\$FName > \$\$OutName"
-LITERATE_EXT="nw"
+test $image_command = "convert" && image_command="convert \$\$i \$\$o"
# Search for a Postscript interpreter
echo $ac_n "checking for a Postscript interpreter""... $ac_c"
# Search for a program to preview pdf
echo $ac_n "checking for a PDF preview""... $ac_c"
-echo "$ac_t""(xpdf acroread gv ghostview)"
+echo "$ac_t""(acroread gv ghostview xpdf)"
PDF_VIEWER=
-for ac_prog in xpdf acroread gv ghostview
+for ac_prog in acroread gv ghostview xpdf
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
# Search something to preview dvi
echo $ac_n "checking for a DVI previewer""... $ac_c"
-echo "$ac_t""(xdvi)"
+echo "$ac_t""(xdvi windvi yap)"
DVI_VIEWER=
-for ac_prog in xdvi
+for ac_prog in xdvi windvi yap
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
ps_to_pdf_command=none
fi
-test $ps_to_pdf_command = "ps2pdf" && ps_to_pdf_command="ps2pdf \$\$FName"
+test $ps_to_pdf_command = "ps2pdf" && ps_to_pdf_command="ps2pdf \$\$i"
# Search for a program to convert dvi to ps
echo $ac_n "checking for a DVI to PS converter""... $ac_c"
dvi_to_ps_command=none
fi
-test $dvi_to_ps_command = "dvips" && dvi_to_ps_command="dvips -o \$\$OutName \$\$FName"
+test $dvi_to_ps_command = "dvips" && dvi_to_ps_command="dvips -o \$\$o \$\$i"
+
+# Search for a program to convert dvi to pdf
+echo $ac_n "checking for a DVI to PDF converter""... $ac_c"
+echo "$ac_t""(dvipdfm)"
+dvi_to_pdf_command=
+for ac_prog in dvipdfm
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog ; ac_word=$2
+if test -n "$ac_word"; then
+ echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -x $ac_dir/$ac_word; then
+ dvi_to_pdf_command="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+
+ if test -n "$dvi_to_pdf_command"; then
+ ac_result=yes
+ else
+ ac_result=no
+ fi
+
+ echo "$ac_t""$ac_result"
+ test -n "$dvi_to_pdf_command" && break
+fi
+done
+
+if test -z "$dvi_to_pdf_command" ; then
+ dvi_to_pdf_command=none
+fi
+
+test $dvi_to_pdf_command = "dvipdfm" && dvi_to_pdf_command="dvipdfm \$\$i"
# Search a *roff program (used to translate tables in ASCII export)
echo $ac_n "checking for a *roff formatter""... $ac_c"
fi
-# Search a Fax handling program
-echo $ac_n "checking for a fax driver""... $ac_c"
-echo "$ac_t""(sendfax faxsend fax)"
-FAX=
-for ac_prog in sendfax faxsend fax
+
+# Search a GUI Fax program
+echo $ac_n "checking for a fax program""... $ac_c"
+echo "$ac_t""(ksendfax)"
+fax_command=
+for ac_prog in ksendfax
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -x $ac_dir/$ac_word; then
- FAX="$ac_prog"
+ fax_command="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
- if test -n "$FAX"; then
+ if test -n "$fax_command"; then
ac_result=yes
else
ac_result=no
fi
echo "$ac_t""$ac_result"
- test -n "$FAX" && break
+ test -n "$fax_command" && break
fi
done
-if test -z "$FAX" ; then
- FAX=none
+if test -z "$fax_command" ; then
+ fax_command=none
fi
-if test $FAX = sendfax ; then
- fax_command="sendfax -n -h '\$\$Host' -c '\$\$Comment' -x '\$\$Enterprise' -d '\$\$Name'@'\$\$Phone' '\$\$FName'"
-elif test $FAX = faxsend ; then
- fax_command="faxsend '\$\$Phone' '\$\$FName'"
-elif test $FAX = fax ; then
- fax_command="fax send '\$\$Phone' '\$\$FName'"
-else
- fax_command="none"
-fi
+test $fax_command = "ksendfax" && fax_command="ksendfax \$\$i"
# Search for LinuxDoc support
echo $ac_n "checking for SGML-tools 1.x (LinuxDoc)""... $ac_c"
case $LINUXDOC in
sgml2lyx)
- linuxdoc_to_latex_command="sgml2latex \$\$FName"
- linuxdoc_to_dvi_command="sgml2latex -o dvi \$\$FName"
- linuxdoc_to_html_command="sgml2html \$\$FName"
- linuxdoc_to_lyx_command="sgml2lyx";;
+ linuxdoc_to_latex_command="sgml2latex \$\$i"
+ linuxdoc_to_dvi_command="sgml2latex -o dvi \$\$i"
+ linuxdoc_to_html_command="sgml2html \$\$i"
+ linuxdoc_to_lyx_command="sgml2lyx \$\$i";;
none)
linuxdoc_to_latex_command="none"
linuxdoc_to_dvi_command="none"
case $DOCBOOK in
sgmltools)
- docbook_to_dvi_command="sgmltools -b dvi \$\$FName"
- docbook_to_html_command="sgmltools -b html \$\$FName";;
+ docbook_to_dvi_command="sgmltools -b dvi \$\$i"
+ docbook_to_html_command="sgmltools -b html \$\$i";;
db2dvi)
- docbook_to_dvi_command="db2dvi \$\$FName"
- docbook_to_html_command="db2html \$\$FName";;
+ docbook_to_dvi_command="db2dvi \$\$i"
+ docbook_to_html_command="db2html \$\$i";;
none)
docbook_to_dvi_command="none"
docbook_to_html_command="none";;
*) :;; # leave to empty values
esac
-# Search for a latex to html converter
-echo $ac_n "checking for an HTML converter""... $ac_c"
+echo $ac_n "checking for a LaTeX -> HTML converter""... $ac_c"
echo "$ac_t""(tth latex2html hevea)"
TOHTML=
for ac_prog in tth latex2html hevea
TOHTML=none
fi
-latex_to_html_command = $TOHTML
+latex_to_html_command=$TOHTML
case $TOHTML in
- tth) latex_to_html_command="tth -t -e2 -L\$\$BaseName < \$\$FName > \$\$OutName";;
- latex2html) latex_to_html_command="latex2html -no_subdir -split 0 -show_section_numbers \$\$FName";;
- hevea) latex_to_html_command="hevea -s \$\$FName";;
+ tth) latex_to_html_command="tth -t -e2 -L\$\$b < \$\$i > \$\$o";;
+ latex2html) latex_to_html_command="latex2html -no_subdir -split 0 -show_section_numbers \$\$i";;
+ hevea) latex_to_html_command="hevea -s \$\$i";;
esac
#### Explore the LaTeX configuration
# want to customize LyX, make a copy of the file LYXDIR/lyxrc as
# ~/.lyx/lyxrc and edit this file instead. Any setting in lyxrc will
# override the values given here.
-\\converter tex dvi "$LATEX" ""
-\\converter tex pdf "$PDFLATEX" ""
+\\Format text txt ASCII A
+\\Format textparagraph txt ASCII(paragraphs) ""
+\\Format docbook sgml DocBook B
+\\Format dvi dvi DVI D
+\\Format eps eps EPS ""
+\\Format fax "" Fax ""
+\\Format gif gif GIF ""
+\\Format html html HTML H
+\\Format jpg jpg JPEG ""
+\\Format latex tex LaTeX L
+\\Format linuxdoc sgml LinuxDoc x
+\\Format lyx lyx LyX ""
+\\Format literate nw NoWeb N
+\\Format pdf pdf PDF P
+\\Format pdf2 pdf "PDF (pdflatex)" F
+\\Format pdf3 pdf "PDF (dvipdfm)" m
+\\Format png png PNG ""
+\\Format ps ps Postscript t
+\\Format program "" Program ""
+\\Format word doc Word W
+
+
+\\converter latex dvi "$LATEX \$\$i" "latex"
+\\converter latex pdf2 "$PDFLATEX \$\$i" "latex"
+\\converter latex html "$latex_to_html_command" "originaldir,needaux"
+\\converter literate latex "$literate_to_tex_command" ""
+\\converter dvi pdf3 "$dvi_to_pdf_command" ""
\\converter dvi ps "$dvi_to_ps_command" ""
\\converter ps pdf "$ps_to_pdf_command" ""
-\\converter sgml tex "$linuxdoc_to_latex_command" ""
-\\converter sgml dvi "$linuxdoc_to_dvi_command" ""
-\\converter sgml html "$linuxdoc_to_html_command" ""
+\\converter ps fax "$fax_command" ""
+\\converter linuxdoc lyx "$linuxdoc_to_lyx_command" ""
+\\converter linuxdoc latex "$linuxdoc_to_latex_command" ""
+\\converter linuxdoc dvi "$linuxdoc_to_dvi_command" ""
+\\converter linuxdoc html "$linuxdoc_to_html_command" ""
\\converter docbook dvi "$docbook_to_dvi_command" ""
\\converter docbook html "$docbook_to_html_command" ""
-\\converter tex html "$latex_to_html_command"
- "originaldir,needaux"
-\\converter $LITERATE_EXT tex "$LITERATE" ""
+
+\\converter latex lyx "$tex_to_lyx_command" ""
+\\converter literate lyx "$literate_to_lyx_command" ""
+\\converter html latex "$html_to_latex_command" ""
+\\converter word latex "$word_to_latex_command" ""
+
+\converter gif eps "$image_command" ""
+\converter png eps "$image_command" ""
+\converter jpg eps "$image_command" ""
+\converter gif png "$image_command" ""
\\viewer dvi "$DVI_VIEWER"
\\viewer html "$HTML_VIEWER"
\\viewer ps "$GHOSTVIEW -swap"
\\viewer eps "$GHOSTVIEW"
-\\relyx_command "$RELYX"
-\\linuxdoc_to_lyx_command "$linuxdoc_to_lyx_command"
-\\literate_extension "$LITERATE_EXT"
\\ps_command "$GS"
\\ascii_roff_command "$ascii_roff_command"
\\chktex_command "$chktex_command"
\\spell_command "$SPELL"
-\\fax_command "$fax_command"
\\print_spool_command "$print_spool_command"
\\print_spool_printerprefix "$print_spool_printerprefix"
\\font_encoding "$chk_fontenc"
projects / lyx.git / blobdiff