# vi:filetype=python:expandtab:tabstop=2:shiftwidth=2
#
# file SConstruct
-#
+#
# This file is part of LyX, the document processor.
# Licence details can be found in the file COPYING.
-#
+#
# \author Bo Peng
# Full author contact details are available in file CREDITS.
#
#
# This is a scons based building system for lyx, you can use it as follows:
-# (after of course installation of scons from www.scons.org)
-#
+#
# $ cd development/scons
# $ scons [options] [targets]
# or:
# $ scons -f development/scons/SConstruct [options] [targets]
-#
-# After compiling, you can install lyx by
+# and:
# $ scons [prefix=.] install
#
# Where:
-# * targets can be one or more of lyx, tex2lyx, client, default to lyx
-# * options: use scons -h for details about parameters, the most important
+# * targets can be one or more of lyx, tex2lyx, client, po, install.
+# default to lyx, you can use 'scons all' to build all targets except
+# for install
+# * options: use scons -h for details about options, the most important
# one is frontend=qt3|qt4.
-# * qt3 is used by default on linux, cygwin and mac
-# * qt4 is used by default on win32/mingw
+# - qt3 is used by default on linux, cygwin and mac
+# - qt4 is used by default on win32/mingw
#
# File layouts (Important):
# * Unless you specify builddir=dir, building will happen
# * $BUILDDIR has subdirectories
# libs: all intermediate libraries
# boost: boost libraries, if boost=included is used
-# qt3: build result
-# * lyx executable will be in directories like debug/linux-qt3
-#
+# qt3/4: frontend-specific objects
+# * executables will be copied to $BUILDDIR/
+#
# Hints:
+# * scons fast_start=yes
+# If env.cache exists, bypass all tests and use existing src/config.h
+#
# * scons --config=force
# force re-configuration (use scons -H for details)
-#
+#
# * check config.log to see why config has failed
#
# * use extra_inc_path, extra_lib_path, qt_dir, qt_inc_path
-# qt_lib_path to help locate qt and other libraries
-# (there are extra_inc_path1, extra_lib_path1 for now)
+# qt_lib_path to help locate qt and other libraries.
+# There are also extra_inc_path1, extra_lib_path1 if you need to spacify
+# more than one extra paths.
#
-# * (Important) use scons logfile=logfile.log to enable command line
-# logging. (default is no logging)
+# * executed commands will be logged in scons_lyx.log. You can use logfile=
+# option to save log to another file.
#
# Notes:
-# * Currently, all scons does is building lyx in
-# $LYXROOT/$mode/$build_dir/
-# where $mode is debug or release, $build_dir is the build_dir name
-# listed above
#
-# * scons install etc may be added later. Interested contributors can follow
+# * scons dist etc may be added later. Interested contributors can follow
# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/AccumulateBuilder
# or
# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/DistTarBuilder
# Please also see the commented out code in scons_utils.py
-#
+#
# * NSIS support can be found here.
# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/NsisSconsTool
#
# features.
#
-import os, sys
+import os, sys, copy, cPickle, glob
# config/scons_utils.py defines a few utility function
sys.path.append('config')
import scons_utils as utils
-SetOption('implicit_cache', 1)
-
#----------------------------------------------------------
# Required runtime environment
#----------------------------------------------------------
-# FIXME: I remember lyx requires higher version of python?
-EnsurePythonVersion(1, 5)
+# scons asks for 1.5.2, lyx requires 2.2
+EnsurePythonVersion(2, 2)
# Please use at least 0.96.91 (not 0.96.1)
EnsureSConsVersion(0, 96)
PACKAGE_VERSION = '1.5.0svn'
DEVEL_VERSION = True
default_build_mode = 'debug'
+lyx_ext = '*.C'
PACKAGE = 'lyx'
PACKAGE_BUGREPORT = 'lyx-devel@lists.lyx.org'
PACKAGE_NAME = 'LyX'
PACKAGE_TARNAME = 'lyx'
PACKAGE_STRING = '%s %s' % (PACKAGE_NAME, PACKAGE_VERSION)
-PROGRAM_SUFFIX = ''
+
+# various cache/log files
default_log_file = 'scons_lyx.log'
+env_cache_file = 'env.cache'
-# FIXME: what is this? (They are used in src/support/package.C.in
-LOCALEDIR = "../locale/"
-LYX_DIR = "/usr/local/share/lyx"
-# platform dependent default build_dir and other settings
-#
-# I know, somebody would say:
-# This is TOTALLY wrong! Everything should be automatically
-# determined.
-#
+#----------------------------------------------------------
+# platform dependent settings
+#----------------------------------------------------------
if os.name == 'nt':
platform_name = 'win32'
default_frontend = 'qt4'
default_pch_opt = False
default_with_x = False
spell_checker = 'auto'
- # FIXME: I need to know what exactly is boost_posix
- # EF: It indicates to boost which API to use (posix or windows).
+ # boost_posix indicates to boost which API to use (posix or windows).
# If not specified, boost tries to figure out by itself, but it may fail.
boost_posix = False
packaging_method = 'windows'
+ default_prefix = 'c:/program files/lyx'
+ share_dir = 'Resources'
+ man_dir = 'Resources/man/man1'
+ locale_dir = 'Resources/locale'
elif os.name == 'posix' and sys.platform != 'cygwin':
platform_name = sys.platform
default_frontend = 'qt3'
default_with_x = True
boost_posix = True
packaging_method = 'posix'
+ default_prefix = '/usr/local/'
+ share_dir = 'share/lyx'
+ man_dir = 'man/man1'
+ locale_dir = 'share/locale'
elif os.name == 'posix' and sys.platform == 'cygwin':
platform_name = 'cygwin'
default_frontend = 'qt3'
default_with_x = True
boost_posix = True
packaging_method = 'posix'
+ default_prefix = '/usr/local/'
+ share_dir = 'share/lyx'
+ man_dir = 'man/man1'
+ locale_dir = 'share/locale'
elif os.name == 'darwin':
platform_name = 'mac'
default_frontend = 'qt3'
default_pch_opt = False
default_with_x = False
boost_posix = True
- packaging_method = 'msc'
+ packaging_method = 'mac'
+ # FIXME: where to install?
+ default_prefix = '/usr/local/'
+ share_dir = 'Resources'
+ man_dir = 'Resources/man/man1'
+ locale_dir = 'Resources/locale'
else: # unsupported system
platform_name = 'others'
default_frontend = 'qt3'
default_with_x = True
boost_posix = False
packaging_method = 'posix'
+ default_prefix = '/usr/local/'
+ share_dir = 'share/lyx'
+ man_dir = 'man/man1'
+ locale_dir = 'share/locale'
+
#---------------------------------------------------------
# Handling options
#----------------------------------------------------------
-# Note that if you set the options via the command line,
-# they will be remembered in the file 'options.cache'
-#
-# NOTE: the scons people are trying to fix scons so that
-# options like --prefix will be accepted. Right now,
-# we have to use the KEY=VALUE style of scons
-#
-if os.path.isfile('options.cache'):
- print "Getting options from auto-saved options.cache..."
- print open('options.cache').read()
+#
if os.path.isfile('config.py'):
print "Getting options from config.py..."
print open('config.py').read()
-opts = Options(['options.cache', 'config.py'])
+opts = Options(['config.py'])
opts.AddOptions(
- # frontend,
- EnumOption('frontend', 'Main GUI',
- default_frontend,
+ # frontend,
+ EnumOption('frontend', 'Main GUI', default_frontend,
allowed_values = ('xform', 'qt3', 'qt4', 'gtk') ),
# debug or release build
EnumOption('mode', 'Building method', default_build_mode,
allowed_values = ('debug', 'release') ),
# boost libraries
- EnumOption('boost',
- 'Use included, system boost library, or try sytem first.',
+ EnumOption('boost',
+ 'Use included, system boost library, or try sytem boost first.',
default_boost_opt,
allowed_values = (
'auto', # detect boost, if not found, use included
'included', # always use included boost
'system', # always use system boost, fail if can not find
) ),
- EnumOption('gettext',
- 'Use included, system gettext library, or try sytem first',
+ # FIXME: not implemented yet.
+ EnumOption('gettext',
+ 'Use included, system gettext library, or try sytem gettext first',
default_gettext_opt,
allowed_values = (
'auto', # detect gettext, if not found, use included
'included', # always use included gettext
'system', # always use system gettext, fail if can not find
) ),
- # FIXME: I am not allowed to use '' as default, '.' is not good either.
- PathOption('qt_dir', 'Path to qt directory', '.'),
- PathOption('qt_include_path', 'Path to qt include directory', '.'),
- PathOption('qt_lib_path', 'Path to qt library directory', '.'),
+ #
+ EnumOption('spell', 'Choose spell checker to use.', 'auto',
+ allowed_values = ('aspell', 'pspell', 'ispell', 'auto') ),
+ #
+ BoolOption('fast_start', 'Whether or not use cached tests and keep current config.h', True),
+ #
+ BoolOption('load_option', 'load option from previous scons run', True),
# FIXME: I do not know how pch is working. Ignore this option now.
BoolOption('pch', '(NA) Whether or not use pch', default_pch_opt),
- # FIXME: Not implemented yet.
- BoolOption('version_suffix', '(NA) Whether or not add version suffix', False),
- # build directory, will replace build_dir if set
- PathOption('build_dir', 'Build directory', '.'),
- # extra include and libpath
- PathOption('extra_inc_path', 'Extra include path', '.'),
- PathOption('extra_lib_path', 'Extra library path', '.'),
- PathOption('extra_inc_path1', 'Extra include path', '.'),
- PathOption('extra_lib_path1', 'Extra library path', '.'),
- # enable assertion, (config.h has ENABLE_ASSERTIOS
+ # enable assertion, (config.h has ENABLE_ASSERTIOS
BoolOption('assertions', 'Use assertions', True),
- # enable warning, (config.h has WITH_WARNINGS)
+ # enable warning, (config.h has WITH_WARNINGS)
BoolOption('warnings', 'Use warnings', True),
- # enable glib, (config.h has _GLIBCXX_CONCEPT_CHECKS)
+ # enable glib, (config.h has _GLIBCXX_CONCEPT_CHECKS)
BoolOption('concept_checks', 'Enable concept checks', True),
- # FIXME: I do not know what is nls
- BoolOption('nls', '(NA) Whether or not use native language support', False),
+ #
+ BoolOption('nls', 'Whether or not use native language support', True),
# FIXME: not implemented
BoolOption('profile', '(NA) Whether or not enable profiling', False),
- #
- PathOption('prefix', 'install architecture-independent files in PREFIX', '.'),
- #
- PathOption('exec_prefix', 'install architecture-independent executable files in PREFIX', '.'),
# FIXME: not implemented
BoolOption('std_debug', '(NA) Whether or not turn on stdlib debug', False),
# using x11?
BoolOption('X11', 'Use x11 windows system', default_with_x),
- # FIXME: not implemented
- BoolOption('libintl', '(NA) Use libintl library', False),
- # FIXME: not implemented
- PathOption('intl_prefix', '(NA) Path to intl library', '.'),
+ # use MS VC++ to build lyx
+ BoolOption('use_vc', 'Use MS VC++ to build lyx', False),
+ #
+ PathOption('qt_dir', 'Path to qt directory', None),
+ #
+ PathOption('qt_include_path', 'Path to qt include directory', None),
+ #
+ PathOption('qt_lib_path', 'Path to qt library directory', None),
+ # build directory, will use $mode if not set
+ PathOption('build_dir', 'Build directory', None),
+ # extra include and libpath
+ PathOption('extra_inc_path', 'Extra include path', None),
+ #
+ PathOption('extra_lib_path', 'Extra library path', None),
+ #
+ PathOption('extra_inc_path1', 'Extra include path', None),
+ #
+ PathOption('extra_lib_path1', 'Extra library path', None),
+ # rebuild only specifed, comma separated targets
+ ('rebuild', 'rebuild only specifed, comma separated targets', None),
+ # can be set to a non-existing directory
+ ('prefix', 'install architecture-independent files in PREFIX', None),
+ # will install to dest_dir if defined. Otherwise, prefix will be used.
+ ('dest_dir', 'install to dest_dir', None),
+ # version suffix
+ ('version_suffix', 'install lyx as lyx-suffix', ''),
+ #
+ PathOption('exec_prefix', 'install architecture-independent executable files in PREFIX', None),
# log file
('logfile', 'save commands (not outputs) to logfile', default_log_file),
# Path to aikasurus
- PathOption('aikasurus_path', 'Path to aikasurus library', '.'),
- #
- EnumOption('spell', 'Choose spell checker to use.', 'auto',
- allowed_values = ('aspell', 'pspell', 'ispell', 'auto') ),
- # environment variable can be set as options
- ('CC', '$CC', 'gcc'),
- ('CPP', '$CPP', 'gcc -E'),
- ('CXX', '$CXX', 'g++'),
- ('CXXCPP', '$CXXCPP', 'g++ -E'),
- ('CCFLAGS', '$CCFLAGS', ''),
- ('CPPFLAGS', '$CPPFLAGS', ''),
- ('CPPPATH', '$CPPPATH', ''),
- ('LDFLAGS', '$LDFLAGS', ''),
-)
-
-# Determine the frontend to use
-frontend = ARGUMENTS.get('frontend', default_frontend)
-use_X11 = ARGUMENTS.get('X11', default_with_x)
+ PathOption('aikasurus_path', 'Path to aikasurus library', None),
+ # environment variable can be set as options. (DO NOT set defaults)
+ ('CC', '$CC', None),
+ ('LINK', '$LINK', None),
+ ('CPP', '$CPP', None),
+ ('CXX', '$CXX', None),
+ ('CXXCPP', '$CXXCPP', None),
+ ('CCFLAGS', '$CCFLAGS', None),
+ ('CPPFLAGS', '$CPPFLAGS', None),
+ ('LDFLAGS', '$LDFLAGS', None),
+)
+
+# whether or not use current config.h, and cached tests
+if (not ARGUMENTS.has_key('fast_start') or \
+ ARGUMENTS['fast_start'] in ['y', 'yes', 't', 'true', '1', 'all']) \
+ and os.path.isfile(env_cache_file):
+ fast_start = True
+ cache_file = open(env_cache_file)
+ env_cache = cPickle.load(cache_file)
+ cache_file.close()
+ print '------------ fast_start mode --------------------'
+ print ' Use cached test results and current config.h'
+ print ' use fast_start=no to override'
+ print
+else:
+ fast_start = False
+ env_cache = {}
+
+if (not ARGUMENTS.has_key('load_option') or \
+ ARGUMENTS['load_option'] in ['y', 'yes', 't', 'true', '1', 'all']) \
+ and os.path.isfile(env_cache_file):
+ cache_file = open(env_cache_file)
+ opt_cache = cPickle.load(cache_file)['arg_cache']
+ cache_file.close()
+ # import cached options, but we should ignore qt_dir when frontend changes
+ if ARGUMENTS.has_key('frontend') and opt_cache.has_key('frontend') \
+ and ARGUMENTS['frontend'] != opt_cache['frontend'] \
+ and opt_cache.has_key('qt_dir'):
+ opt_cache.pop('qt_dir')
+ # some options will require full rebuild
+ # these are in general things that will change src/config.h
+ for arg in ['version_suffix', 'nls']:
+ if ARGUMENTS.has_key(arg) and ((not opt_cache.has_key(arg)) or \
+ ARGUMENTS[arg] != opt_cache[arg]):
+ if fast_start:
+ print " ** fast_start is disabled because of the change of option", arg
+ print
+ fast_start = False
+ # and we do not cache some options
+ for arg in ['fast_start']:
+ if opt_cache.has_key(arg):
+ opt_cache.pop(arg)
+ for key in opt_cache.keys():
+ if not ARGUMENTS.has_key(key):
+ ARGUMENTS[key] = opt_cache[key]
+ print "Restoring cached option %s=%s" % (key, ARGUMENTS[key])
+ print
+
+# save arguments
+env_cache['arg_cache'] = ARGUMENTS
+
#---------------------------------------------------------
# Setting up environment
#---------------------------------------------------------
+# Note that I do not really like ENV=os.environ, but you may
+# add it here if you experience some environment related problem
env = Environment(options = opts)
-# set environment since I do not really like ENV = os.environ
+# Determine the frontend to use, which may be loaded
+# from option cache
+frontend = env.get('frontend', default_frontend)
+# make sure the key exists
+env['frontend'] = frontend
+env['LYX_EXT'] = lyx_ext
+#
+use_X11 = env.get('X11', default_with_x)
+use_vc = env.get('use_vc', False)
+# use it only once for s scons-bug, will remove it later.
+env['USE_VC'] = use_vc
+
+
+# set individual variables since I do not really like ENV = os.environ
env['ENV']['PATH'] = os.environ.get('PATH')
env['ENV']['HOME'] = os.environ.get('HOME')
-env['TOP_SRC_DIR'] = TOP_SRC_DIR
+# these are defined for MSVC
+env['ENV']['LIB'] = os.environ.get('LIB')
+env['ENV']['INCLUDE'] = os.environ.get('INCLUDE')
+if use_vc:
+ # full path name is used to build msvs project files
+ env['TOP_SRC_DIR'] = Dir(TOP_SRC_DIR).abspath
+else:
+ env['TOP_SRC_DIR'] = TOP_SRC_DIR
env['SCONS_DIR'] = SCONS_DIR
-# install to current directory by default
-env['PREFIX'] = ARGUMENTS.get('prefix', '.')
-env['BIN_DIR'] = ARGUMENTS.get('exec_prefix',
- os.path.join(env['PREFIX'], 'bin'))
+# install to default_prefix by default
+env['PREFIX'] = env.get('prefix', default_prefix)
+# program suffix
+if env.has_key('version_suffix'):
+ if env['version_suffix'] in ['y', 'yes', 't', 'true', '1', 'all']:
+ env['PROGRAM_SUFFIX'] = PACKAGE_VERSION
+ else:
+ env['PROGRAM_SUFFIX'] = env['version_suffix']
+else:
+ env['PROGRAM_SUFFIX'] = ''
+
+# whether or not add suffix to file and directory names
+env['ADD_SUFFIX'] = packaging_method != 'windows'
+if env['ADD_SUFFIX']:
+ env['SHARE_DIR'] = os.path.join(env['PREFIX'], share_dir + env['PROGRAM_SUFFIX'])
+else:
+ env['SHARE_DIR'] = os.path.join(env['PREFIX'], share_dir)
+env['LOCALE_DIR'] = os.path.join(env['PREFIX'], locale_dir)
+#
+# if dest_dir is different from prefix.
+env['DEST_DIR'] = env.get('dest_dir', env['PREFIX'])
+if env.has_key('exec_prefix'):
+ env['BIN_DEST_DIR'] = env['exec_prefix']
+else:
+ env['BIN_DEST_DIR'] = os.path.join(env['DEST_DIR'], 'bin')
+if env['ADD_SUFFIX']:
+ env['SHARE_DEST_DIR'] = os.path.join(env['DEST_DIR'], share_dir + env['PROGRAM_SUFFIX'])
+else:
+ env['SHARE_DEST_DIR'] = os.path.join(env['DEST_DIR'], share_dir)
+env['MAN_DEST_DIR'] = os.path.join(env['DEST_DIR'], man_dir)
+env['LOCALE_DEST_DIR'] = os.path.join(env['DEST_DIR'], locale_dir)
+
+#
+# this is a bit out of place (after auto-configration) but
+# it is required to do the tests. Since Tool('mingw') will
+# reset CCFLAGS etc, this should be done before getEnvVariable
+if platform_name == 'win32' and not use_vc:
+ env.Tool('mingw')
+ env.AppendUnique(CPPPATH = ['#c:/MinGW/include'])
+elif use_vc:
+ env.Tool('msvc')
+ env.Tool('mslink')
+
# speed up source file processing
#env['CPPSUFFIXES'] = ['.C', '.cc', '.cpp']
def getEnvVariable(env, name):
# first try command line argument (override environment settings)
if ARGUMENTS.has_key(name) and ARGUMENTS[name].strip() != '':
- env[name] = ARGUMENTS[name]
- # then try environment variable
+ # multiple options may be passed like "-02 -g"
+ env[name] = ARGUMENTS[name].split()
+ # it does not seem necessary, but it is safer to change ['a'] back to 'a'
+ if len(env[name]) == 1:
+ env[name] = env[name][0]
+ # then use environment default
elif os.environ.has_key(name) and os.environ[name].strip() != '':
- env[name] = os.environ[name]
print "Acquiring varaible %s from system environment: %s" % (name, env[name])
+ env[name] = os.environ[name].split()
+ if len(env[name]) == 1:
+ env[name] = env[name][0]
+ # finally, env['CC'] etc is set to the default values of Options.
+ # and env['CPP'] etc does not exist
getEnvVariable(env, 'CC')
+getEnvVariable(env, 'LINK')
getEnvVariable(env, 'CPP')
getEnvVariable(env, 'CXX')
getEnvVariable(env, 'CXXCPP')
getEnvVariable(env, 'CCFLAGS')
getEnvVariable(env, 'CXXFLAGS')
getEnvVariable(env, 'CPPFLAGS')
-getEnvVariable(env, 'CPPPATH')
getEnvVariable(env, 'LDFLAGS')
-# under windows, scons is confused by .C/.c and uses gcc instead of
-# g++. I am forcing the use of g++ here. This is expected to change
-# after lyx renames all .C files to .cpp
-if platform_name == 'cygwin':\r
- env['CC'] = 'g++'
- env['LINK'] = 'g++'
#
# frontend, mode, BUILDDIR and LOCALLIBPATH=BUILDDIR/libs
-#
-env['frontend'] = frontend
-env['mode'] = ARGUMENTS.get('mode', default_build_mode)
+#
+env['mode'] = env.get('mode', default_build_mode)
# lyx will be built to $build/build_dir so it is possible
-# to build multiple build_dirs using the same source
+# to build multiple build_dirs using the same source
# $mode can be debug or release
-if ARGUMENTS.has_key('build_dir'):
- build_dir = ARGUMENTS['build_dir']
+if env.has_key('build_dir') and env['build_dir']:
+ build_dir = env['build_dir']
env['BUILDDIR'] = build_dir
else:
- # Determine the name of the build (platform+frontend
+ # Determine the name of the build $mode
env['BUILDDIR'] = '#' + env['mode']
# all built libraries will go to build_dir/libs
# (This is different from the make file approach)
env['LOCALLIBPATH'] = '$BUILDDIR/libs'
+# to make use of local cached parameters, this one has to be '.'
+env['MSVSPATH'] = '.'
env.AppendUnique(LIBPATH = ['$LOCALLIBPATH'])
#
# QTDIR, QT_LIB_PATH, QT_INC_PATH
#
-if platform_name == 'win32':
- env.Tool('mingw')
-
-if ARGUMENTS.has_key('qt_dir'):
- env['QTDIR'] = ARGUMENTS['qt_dir']
+if env.has_key('qt_dir') and env['qt_dir']:
+ env['QTDIR'] = env['qt_dir']
# add path to the qt tools
- env.AppendUnique(LIBPATH = [os.path.join(ARGUMENTS['qt_dir'], 'lib')])
- env.AppendUnique(CPPPATH = [os.path.join(ARGUMENTS['qt_dir'], 'include')])
+ env.AppendUnique(LIBPATH = [os.path.join(env['qt_dir'], 'lib')])
# set environment so that moc etc can be found even if its path is not set properly
- env.PrependENVPath('PATH', os.path.join(ARGUMENTS['qt_dir'], 'bin'))
+ env.PrependENVPath('PATH', os.path.join(env['qt_dir'], 'bin'))
else:
env['QTDIR'] = os.environ.get('QTDIR', '/usr/lib/qt-3.3')
-if ARGUMENTS.has_key('qt_lib_path'):
- env['QT_LIB_PATH'] = ARGUMENTS['qt_lib_path']
+if env.has_key('qt_lib_path') and env['qt_lib_path']:
+ env['QT_LIB_PATH'] = env['qt_lib_path']
else:
env['QT_LIB_PATH'] = '$QTDIR/lib'
env.AppendUnique(LIBPATH = ['$QT_LIB_PATH'])
# qt4 seems to be using pkg_config
env.PrependENVPath('PKG_CONFIG_PATH', env.subst('$QT_LIB_PATH'))
-if ARGUMENTS.has_key('qt_inc_path'):
- env['QT_INC_PATH'] = ARGUMENTS['qt_inc_path']
+if env.has_key('qt_inc_path') and env['qt_inc_path']:
+ env['QT_INC_PATH'] = env['qt_inc_path']
elif os.path.isdir(os.path.join(env.subst('$QTDIR'), 'include')):
env['QT_INC_PATH'] = '$QTDIR/include'
else: # have to guess
env['QT_INC_PATH'] = '/usr/include/$frontend/'
-env.AppendUnique(CPPPATH = env['QT_INC_PATH'])
+# Note that this CPPPATH is for testing only
+# it will be removed before calling SConscript
+env['CPPPATH'] = [env['QT_INC_PATH']]
#
# extra_inc_path and extra_lib_path
#
-if ARGUMENTS.has_key('extra_inc_path'):
- env.AppendUnique(CPPPATH = [ARGUMENTS['extra_inc_path']])
-if ARGUMENTS.has_key('extra_lib_path'):
- env.AppendUnique(LIBPATH = [ARGUMENTS['extra_lib_path']])
-if ARGUMENTS.has_key('extra_inc_path1'):
- env.AppendUnique(CPPPATH = [ARGUMENTS['extra_inc_path1']])
-if ARGUMENTS.has_key('extra_lib_path1'):
- env.AppendUnique(LIBPATH = [ARGUMENTS['extra_lib_path1']])
-if ARGUMENTS.has_key('aikasurus_path'):
- env.AppendUnique(LIBPATH = [ARGUMENTS['aikasurus_path']])
-
-#
-# this is a bit out of place (after auto-configration)
-# but it is required to do the tests.
-if platform_name == 'win32':
- env.AppendUnique(CPPPATH = ['#c:/MinGW/include'])
+if env.has_key('extra_inc_path') and env['extra_inc_path']:
+ env.AppendUnique(CPPPATH = [env['extra_inc_path']])
+if env.has_key('extra_lib_path') and env['extra_lib_path']:
+ env.AppendUnique(LIBPATH = [env['extra_lib_path']])
+if env.has_key('extra_inc_path1') and env['extra_inc_path1']:
+ env.AppendUnique(CPPPATH = [env['extra_inc_path1']])
+if env.has_key('extra_lib_path1') and env['extra_lib_path1']:
+ env.AppendUnique(LIBPATH = [env['extra_lib_path1']])
+if env.has_key('aikasurus_path') and env['aikasurus_path']:
+ env.AppendUnique(LIBPATH = [env['aikasurus_path']])
+
+
+# under windows, scons is confused by .C/.c and uses gcc instead of
+# g++. I am forcing the use of g++ here. This is expected to change
+# after lyx renames all .C files to .cpp
+#
+# Note that this step has to be after env.Tool('mingw') step
+# since env.Tool('mingw') will set env['CC'] etc.
+#
+# save the old c compiler and CCFLAGS (used by libintl)
+env['C_COMPILER'] = env.subst('$CC')
+env['C_CCFLAGS'] = env.subst('$CCFLAGS').split()
+# if we use ms vc, the commands are fine (cl.exe and link.exe)
+if not use_vc:
+ if env.has_key('CXX') and env['CXX']:
+ env['CC'] = env.subst('$CXX')
+ env['LINK'] = env.subst('$CXX')
+ else:
+ env['CC'] = 'g++'
+ env['LINK'] = 'g++'
+else:
+ # /TP treat all source code as C++
+ # C4819: The file contains a character that cannot be represented
+ # in the current code page (number)
+ # C4996: foo was decleared deprecated
+ env.Append(CCFLAGS=['/TP', '/EHsc', '/wd4819', '/wd4996'])
+ env.Append(C_CCFLAGS=['/Dinline#', '/D__attribute__(x)#', '/Duintmax_t=UINT_MAX'])
+
#----------------------------------------------------------
-# Autoconf business
+# Autoconf business
#----------------------------------------------------------
conf = Configure(env,
custom_tests = {
'CheckPkgConfig' : utils.checkPkgConfig,
'CheckPackage' : utils.checkPackage,
- 'CheckPutenv' : utils.checkPutenv,
- 'CheckIstreambufIterator' : utils.checkIstreambufIterator,
'CheckMkdirOneArg' : utils.checkMkdirOneArg,
- 'CheckStdCount' : utils.checkStdCount,
'CheckSelectArgType' : utils.checkSelectArgType,
'CheckBoostLibraries' : utils.checkBoostLibraries,
+ 'CheckCommand' : utils.checkCommand,
+ 'CheckCXXGlobalCstd' : utils.checkCXXGlobalCstd,
+ 'CheckLC_MESSAGES' : utils.checkLC_MESSAGES,
+ 'CheckIconvConst' : utils.checkIconvConst,
}
)
+
# pkg-config? (if not, we use hard-coded options)
-if conf.CheckPkgConfig('0.15.0'):
- env['HAS_PKG_CONFIG'] = True
+if not fast_start:
+ if conf.CheckPkgConfig('0.15.0'):
+ env['HAS_PKG_CONFIG'] = True
+ else:
+ print 'pkg-config >= 0.1.50 is not found'
+ env['HAS_PKG_CONFIG'] = False
+ env_cache['HAS_PKG_CONFIG'] = env['HAS_PKG_CONFIG']
else:
- print 'pkg-config >= 0.1.50 is not found'
- env['HAS_PKG_CONFIG'] = False
+ env['HAS_PKG_CONFIG'] = env_cache['HAS_PKG_CONFIG']
-# zlib? This is required.
-if not conf.CheckLibWithHeader('z', 'zlib.h', 'C'):
- print 'Did not find libz or zlib.h, exiting!'
- Exit(1)
+# zlib? This is required. (fast_start assumes the existance of zlib)
+if not fast_start:
+ if (not use_vc and not conf.CheckLibWithHeader('z', 'zlib.h', 'C')) \
+ or (use_vc and not conf.CheckLibWithHeader('zdll', 'zlib.h', 'C')):
+ print 'Did not find zdll.lib or zlib.h, exiting!'
+ Exit(1)
# qt libraries?
-#
-# qt3 does not use pkg_config
-if env['frontend'] == 'qt3':
- if not conf.CheckLibWithHeader('qt-mt', 'qapp.h', 'c++', 'QApplication qapp();'):
- print 'Did not find qt libraries, exiting!'
- Exit(1)
-elif env['frontend'] == 'qt4':
+if not fast_start:
+ #
+ # qt3 does not use pkg_config
+ if frontend == 'qt3':
+ if not conf.CheckLibWithHeader('qt-mt', 'qapp.h', 'c++', 'QApplication qapp();'):
+ print 'Did not find qt libraries, exiting!'
+ Exit(1)
+ elif frontend == 'qt4':
+ succ = False
+ # first: try pkg_config
+ if env['HAS_PKG_CONFIG']:
+ succ = conf.CheckPackage('QtCore') or conf.CheckPackage('QtCore4')
+ env['QT4_PKG_CONFIG'] = succ
+ # second: try to link to it
+ if not succ:
+ # FIXME: under linux, I can test the following perfectly
+ # However, under windows, lib names need to passed as libXXX4.a ...
+ succ = conf.CheckLibWithHeader('QtCore', 'QtGui/QApplication', 'c++', 'QApplication qapp();') or \
+ conf.CheckLibWithHeader('QtCore4', 'QtGui/QApplication', 'c++', 'QApplication qapp();')
+ # third: try to look up the path
+ if not succ:
+ succ = True
+ for lib in ['QtCore', 'QtGui']:
+ # windows version has something like QtGui4 ...
+ if not (os.path.isfile(os.path.join(env.subst('$QT_LIB_PATH'), 'lib%s.a' % lib)) or \
+ os.path.isfile(os.path.join(env.subst('$QT_LIB_PATH'), 'lib%s4.a' % lib))):
+ succ = False
+ break
+ # still can not find it
+ if succ:
+ print "Qt4 libraries are found."
+ else:
+ print 'Did not find qt libraries, exiting!'
+ Exit(1)
+
+# now, if msvc2005 is used, we will need that QT_LIB_PATH/QT_LIB.manifest file
+if use_vc:
+ # glob file xxx.dll.manifest (msvc 2003 may not have it)
+ manifests = glob.glob(os.path.join(env.subst('$QT_LIB_PATH'), '*.dll.manifest'))
+ if manifests != []:
+ env['LINKCOM'] = [env['LINKCOM'], 'mt.exe /MANIFEST %s /outputresource:$TARGET;1' % manifests[0]]
+
+# check socket libs
+if not fast_start:
+ env['SOCKET_LIBS'] = []
+ if conf.CheckLib('socket'):
+ env['SOCKET_LIBS'].append('socket')
+
+ # nsl is the network services library and provides a
+ # transport-level interface to networking services.
+ if conf.CheckLib('nsl'):
+ env['SOCKET_LIBS'].append('nsl')
+
+ env_cache['SOCKET_LIBS'] = env['SOCKET_LIBS']
+else:
+ env['SOCKET_LIBS'] = env_cache['SOCKET_LIBS']
+
+if not fast_start:
+ # check boost libraries
+ boost_opt = ARGUMENTS.get('boost', default_boost_opt)
+ # check for system boost
succ = False
- # first: try pkg_config
- if env['HAS_PKG_CONFIG']:
- succ = conf.CheckPackage('QtCore') or conf.CheckPackage('QtCore4')
- env['QT4_PKG_CONFIG'] = succ
- # second: try to link to it
- if not succ:
- # FIXME: under linux, I can test the following perfectly
- # However, under windows, lib names need to passed as libXXX4.a ...
- succ = conf.CheckLibWithHeader('QtCore', 'QtGui/QApplication', 'c++', 'QApplication qapp();') or \
- conf.CheckLibWithHeader('QtCore4', 'QtGui/QApplication', 'c++', 'QApplication qapp();')
- # third: try to look up the path
+ if boost_opt in ['auto', 'system']:
+ pathes = env['LIBPATH'] + ['/usr/lib', '/usr/local/lib']
+ sig = conf.CheckBoostLibraries('boost_signals', pathes)
+ reg = conf.CheckBoostLibraries('boost_regex', pathes)
+ fil = conf.CheckBoostLibraries('boost_filesystem', pathes)
+ ios = conf.CheckBoostLibraries('boost_iostreams', pathes)
+ # if any of them is not found
+ if ('' in [sig[0], reg[0], fil[0], ios[0]]):
+ if boost_opt == 'system':
+ print "Can not find system boost libraries"
+ print "Please supply a path through extra_lib_path and try again."
+ print "Or use boost=included to use included boost libraries."
+ Exit(2)
+ else:
+ env['BOOST_LIBRARIES'] = [sig[1], reg[1], fil[1], ios[1]]
+ # assume all boost libraries are in the same path...
+ env.AppendUnique(LIBPATH = [sig[0]])
+ env['INCLUDED_BOOST'] = False
+ succ = True
+ # now, auto and succ = false, or boost=included
if not succ:
- succ = True
- for lib in ['QtCore', 'QtGui']:
- # windows version has something like QtGui4 ...
- if not (os.path.isfile(os.path.join(env.subst('$QT_LIB_PATH'), 'lib%s.a' % lib)) or \
- os.path.isfile(os.path.join(env.subst('$QT_LIB_PATH'), 'lib%s4.a' % lib))):
- succ = False
- break
- # still can not find it
- if succ:
- print "Qt4 libraries are found."
- else:
- print 'Did not find qt libraries, exiting!'
- Exit(1)
+ # we do not need to set LIBPATH now.
+ env['BOOST_LIBRARIES'] = ['included_boost_signals', 'included_boost_regex',
+ 'included_boost_filesystem', 'included_boost_iostreams']
+ env['INCLUDED_BOOST'] = True
+ env_cache['BOOST_LIBRARIES'] = env['BOOST_LIBRARIES']
+ env_cache['INCLUDED_BOOST'] = env['INCLUDED_BOOST']
+else:
+ env['BOOST_LIBRARIES'] = env_cache['BOOST_LIBRARIES']
+ env['INCLUDED_BOOST'] = env_cache['INCLUDED_BOOST']
-# check socket libs
-env['socket_libs'] = []
-if conf.CheckLib('socket'):
- env.AppendUnique(socket_libs = ['socket'])
-
-# FIXME: What is nsl, is it related to socket?
-if conf.CheckLib('nsl'):
- env.AppendUnique(socket_libs = ['nsl'])
-
-# check boost libraries
-boost_opt = ARGUMENTS.get('boost', default_boost_opt)
-# check for system boost
-succ = False
-if boost_opt in ['auto', 'system']:
- pathes = env['LIBPATH'] + ['/usr/lib', '/usr/local/lib']
- sig = conf.CheckBoostLibraries('boost_signals', pathes)
- reg = conf.CheckBoostLibraries('boost_regex', pathes)
- fil = conf.CheckBoostLibraries('boost_filesystem', pathes)
- ios = conf.CheckBoostLibraries('boost_iostreams', pathes)
- # if any them is not found
- if ('' in [sig[0], reg[0], fil[0], ios[0]]):
- if boost_opt == 'system':
- print "Can not find system boost libraries"
- print "Please supply a path through extra_lib_path"
- print "and try again."
- Exit(2)
+
+env['ENABLE_NLS'] = not env.has_key('nls') or env['nls']
+
+if not fast_start:
+ if not env['ENABLE_NLS']:
+ env['INTL_LIBS'] = []
+ env['INCLUDED_GETTEXT'] = False
else:
- env['BOOST_LIBRARIES'] = [sig[1], reg[1], fil[1], ios[1]]
- # assume all boost libraries are in the same path...
- print sig[0]
- env.AppendUnique(LIBPATH = [sig[0]])
- env['INCLUDED_BOOST'] = False
- succ = True
-# now, auto and succ = false, or included
-if not succ:
- # we do not need to set LIBPATH now.
- env['BOOST_LIBRARIES'] = ['boost_signals', 'boost_regex',
- 'boost_filesystem', 'boost_iostreams']
- env['INCLUDED_BOOST'] = True
-
+ # check gettext libraries
+ gettext_opt = ARGUMENTS.get('gettext', default_gettext_opt)
+ # check for system gettext
+ succ = False
+ if gettext_opt in ['auto', 'system']:
+ if conf.CheckLib('intl'):
+ env['INCLUDED_GETTEXT'] = False
+ env['INTL_LIBS'] = ['intl']
+ succ = True
+ else: # no found
+ if gettext_opt == 'system':
+ print "Can not find system gettext library"
+ print "Please supply a path through extra_lib_path and try again."
+ print "Or use gettext=included to use included gettext libraries."
+ Exit(2)
+ # now, auto and succ = false, or gettext=included
+ if not succ:
+ # we do not need to set LIBPATH now.
+ env['INCLUDED_GETTEXT'] = True
+ env['INTL_LIBS'] = ['included_intl']
+ env_cache['INCLUDED_GETTEXT'] = env['INCLUDED_GETTEXT']
+ env_cache['INTL_LIBS'] = env['INTL_LIBS']
+else:
+ env['INTL_LIBS'] = env_cache['INTL_LIBS']
+ env['INCLUDED_GETTEXT'] = env_cache['INCLUDED_GETTEXT']
+
#
-# Building config.h
-#
+# check for msgfmt command
+if not fast_start:
+ env['MSGFMT'] = conf.CheckCommand('msgfmt')
+ env_cache['MSGFMT'] = env['MSGFMT']
+else:
+ env['MSGFMT'] = env_cache['MSGFMT']
-print "Generating ", utils.config_h, "..."
-# I do not handle all macros in src/config.h.in, rather I am following a list
-# of *used-by-lyx* macros compiled by Abdelrazak Younes <younes.a@free.fr>
-#
-# Note: addToConfig etc are defined in scons_util
-utils.startConfigH(TOP_SRC_DIR)
-
-# HAVE_IO_H
-# HAVE_LIMITS_H
-# HAVE_LOCALE_H
-# HAVE_LOCALE
-# HAVE_PROCESS_H
-# HAVE_STDLIB_H
-# HAVE_SYS_STAT_H
-# HAVE_SYS_TIME_H
-# HAVE_SYS_TYPES_H
-# HAVE_SYS_UTIME_H
-# HAVE_UNISTD_H
-# HAVE_UTIME_H
-# HAVE_ISTREAM
-# HAVE_OSTREAM
-# HAVE_IOS
-
-# Check header files
-headers = [
- ('io.h', 'HAVE_IO_H', 'c'),
- ('limits.h', 'HAVE_LIMITS_H', 'c'),
- ('locale.h', 'HAVE_LOCALE_H', 'c'),
- ('locale', 'HAVE_LOCALE', 'cxx'),
- ('process.h', 'HAVE_PROCESS_H', 'c'),
- ('stdlib.h', 'HAVE_STDLIB_H', 'c'),
- ('sys/stat.h', 'HAVE_SYS_STAT_H', 'c'),
- ('sys/time.h', 'HAVE_SYS_TIME_H', 'c'),
- ('sys/types.h', 'HAVE_SYS_TYPES_H', 'c'),
- ('sys/utime.h', 'HAVE_SYS_UTIME_H', 'c'),
- ('sys/socket.h', 'HAVE_SYS_SOCKET_H', 'c'),
- ('unistd.h', 'HAVE_UNISTD_H', 'c'),
- ('utime.h', 'HAVE_UTIME_H', 'c'),
- ('istream', 'HAVE_ISTREAM', 'cxx'),
- ('ostream', 'HAVE_OSTREAM', 'cxx'),
- ('ios', 'HAVE_IOS', 'cxx')
-]
+#----------------------------------------------------------
+# Generating config.h
+#----------------------------------------------------------
+if not fast_start:
+ print "Generating ", utils.config_h, "..."
-for header in headers:
- if (header[2] == 'c' and conf.CheckCHeader(header[0])) or \
- (header[2] == 'cxx' and conf.CheckCXXHeader(header[0])):
- utils.addToConfig('#define %s 1' % header[1], TOP_SRC_DIR)
+ # I do not handle all macros in src/config.h.in, rather I am following a list
+ # of *used-by-lyx* macros compiled by Abdelrazak Younes <younes.a@free.fr>
+ #
+ # Note: addToConfig etc are defined in scons_util
+ utils.startConfigH()
+
+ # HAVE_IO_H
+ # HAVE_LIMITS_H
+ # HAVE_LOCALE_H
+ # HAVE_LOCALE
+ # HAVE_PROCESS_H
+ # HAVE_STDLIB_H
+ # HAVE_SYS_STAT_H
+ # HAVE_SYS_TIME_H
+ # HAVE_SYS_TYPES_H
+ # HAVE_SYS_UTIME_H
+ # HAVE_UNISTD_H
+ # HAVE_UTIME_H
+ # HAVE_STRINGS_H
+ # HAVE_DIRECT_H
+ # HAVE_ISTREAM
+ # HAVE_OSTREAM
+ # HAVE_IOS
+
+ # for libintl % grep HAVE * | grep _H | cut -d: -f2 | sort -u
+
+ #
+ # HAVE_INTTYPES_H
+ # HAVE_STDINT_H
+ # HAVE_ALLOCA_H
+ # HAVE_STDLIB_H
+ # HAVE_STRING_H
+ # HAVE_STDDEF_H
+ # HAVE_LIMITS_H
+ # HAVE_ARGZ_H
+ # HAVE_UNISTD_H
+ # HAVE_SYS_PARAM_H
+
+ # Check header files
+ headers = [
+ ('io.h', 'HAVE_IO_H', 'c'),
+ ('limits.h', 'HAVE_LIMITS_H', 'c'),
+ ('locale.h', 'HAVE_LOCALE_H', 'c'),
+ ('locale', 'HAVE_LOCALE', 'cxx'),
+ ('process.h', 'HAVE_PROCESS_H', 'c'),
+ ('stdlib.h', 'HAVE_STDLIB_H', 'c'),
+ ('sys/stat.h', 'HAVE_SYS_STAT_H', 'c'),
+ ('sys/time.h', 'HAVE_SYS_TIME_H', 'c'),
+ ('sys/types.h', 'HAVE_SYS_TYPES_H', 'c'),
+ ('sys/utime.h', 'HAVE_SYS_UTIME_H', 'c'),
+ ('sys/socket.h', 'HAVE_SYS_SOCKET_H', 'c'),
+ ('unistd.h', 'HAVE_UNISTD_H', 'c'),
+ ('inttypes.h', 'HAVE_INTTYPES_H', 'c'),
+ ('utime.h', 'HAVE_UTIME_H', 'c'),
+ ('string.h', 'HAVE_STRING_H', 'c'),
+ ('strings.h', 'HAVE_STRINGS_H', 'c'),
+ ('direct.h', 'HAVE_DIRECT_H', 'c'),
+ ('istream', 'HAVE_ISTREAM', 'cxx'),
+ ('ostream', 'HAVE_OSTREAM', 'cxx'),
+ ('ios', 'HAVE_IOS', 'cxx'),
+ ('argz.h', 'HAVE_ARGZ_H', 'c'),
+ ('limits.h', 'HAVE_LIMITS_H', 'c'),
+ ('alloca.h', 'HAVE_ALLOCA_H', 'c'),
+ ('stddef.h', 'HAVE_STDDEF_H', 'c'),
+ ('stdint.h', 'HAVE_STDINT_H', 'c'),
+ ('sys/param.h', 'HAVE_SYS_PARAM_H', 'c')
+ ]
+
+ for header in headers:
+ description = "Define to 1 if you have the <%s> header file." % header[0]
+ if (header[2] == 'c' and conf.CheckCHeader(header[0])) or \
+ (header[2] == 'cxx' and conf.CheckCXXHeader(header[0])):
+ utils.addToConfig('#define %s 1' % header[1], desc = description)
+ else:
+ utils.addToConfig('/* #undef %s */' % header[1], desc = description)
+
+ # HAVE_OPEN
+ # HAVE_CLOSE
+ # HAVE_POPEN
+ # HAVE_PCLOSE
+ # HAVE__OPEN
+ # HAVE__CLOSE
+ # HAVE__POPEN
+ # HAVE__PCLOSE
+ # HAVE_GETPID
+ # HAVE__GETPID
+ # HAVE_MKDIR
+ # HAVE__MKDIR
+ # HAVE_PUTENV
+ # HAVE_MKTEMP
+ # HAVE_MKSTEMP
+ # HAVE_STRERROR
+ # HAVE_STD_COUNT
+ # HAVE_GETCWD
+ # HAVE_STRCPY
+ # HAVE_STRCASECMP
+ # HAVE_STRDUP
+ # HAVE_STRTOUL
+ # HAVE_WCSLEN
+ # HAVE_MMAP ?
+ # HAVE_ALLOCA
+ # HAVE___FSETLOCKING
+ # HAVE_MEMPCPY
+ # HAVE_STRCASECMP
+ # HAVE___ARGZ_COUNT
+ # HAVE___ARGZ_NEXT
+ # HAVE___ARGZ_STRINGIFY
+ # HAVE___FSETLOCKING
+ # HAVE_GETCWD
+ # HAVE_STRTOUL
+ # HAVE_STRCASECMP
+ # HAVE_STRDUP
+ # HAVE_TSEARCH
+
+ # Check functions
+ functions = [
+ ('open', 'HAVE_OPEN', None),
+ ('close', 'HAVE_CLOSE', None),
+ ('popen', 'HAVE_POPEN', None),
+ ('pclose', 'HAVE_PCLOSE', None),
+ ('_open', 'HAVE__OPEN', None),
+ ('_close', 'HAVE__CLOSE', None),
+ ('_popen', 'HAVE__POPEN', None),
+ ('_pclose', 'HAVE__PCLOSE', None),
+ ('getpid', 'HAVE_GETPID', None),
+ ('_getpid', 'HAVE__GETPID', None),
+ ('mkdir', 'HAVE_MKDIR', None),
+ ('_mkdir', 'HAVE__MKDIR', None),
+ ('putenv', 'HAVE_PUTENV', None),
+ ('mktemp', 'HAVE_MKTEMP', None),
+ ('mkstemp', 'HAVE_MKSTEMP', None),
+ ('strerror', 'HAVE_STRERROR', None),
+ ('count', 'HAVE_STD_COUNT', '''
+#include <algorithm>
+int count()
+{
+ char a[] = "hello";
+ return std::count(a, a+5, 'l');
+}
+'''),
+ ('getcwd', 'HAVE_GETCWD', None),
+ ('stpcpy', 'HAVE_STPCPY', None),
+ ('strcasecmp', 'HAVE_STRCASECMP', None),
+ ('strdup', 'HAVE_STRDUP', None),
+ ('strtoul', 'HAVE_STRTOUL', None),
+ ('alloca', 'HAVE_ALLOCA', None),
+ ('__fsetlocking', 'HAVE___FSETLOCKING', None),
+ ('mempcpy', 'HAVE_MEMPCPY', None),
+ ('__argz_count', 'HAVE___ARGZ_COUNT', None),
+ ('__argz_next', 'HAVE___ARGZ_NEXT', None),
+ ('__argz_stringify', 'HAVE___ARGZ_STRINGIFY', None),
+ ('setlocale', 'HAVE_SETLOCALE', None),
+ ('tsearch', 'HAVE_TSEARCH', None),
+ ('getegid', 'HAVE_GETEGID', None),
+ ('getgid', 'HAVE_GETGID', None),
+ ('getuid', 'HAVE_GETUID', None),
+ ('wcslen', 'HAVE_WCSLEN', None)
+ ]
+
+ for func in functions:
+ description = "Define to 1 if you have the `%s' function." % func[0]
+ if conf.CheckFunc(func[0], header=func[2]):
+ utils.addToConfig('#define %s 1' % func[1], desc = description)
+ else:
+ utils.addToConfig('/* #undef %s */' % func[1], desc = description)
+
+
+ # HAVE_ASPRINTF
+ # HAVE_WPRINTF
+ # HAVE_SNPRINTF
+ # HAVE_POSIX_PRINTF
+ # HAVE_FCNTL
+
+ env_functions = [
+ ('asprintf', 'HAVE_ASPRINTF'),
+ ('wprintf', 'HAVE_WPRINTF'),
+ ('snprintf', 'HAVE_SNPRINTF'),
+ ('printf', 'HAVE_POSIX_PRINTF'),
+ ('fcntl', 'HAVE_FCNTL')
+ ]
+
+ for func in env_functions:
+ description = "Define to 1 if you have the `%s' function." % func[0]
+ if conf.CheckFunc(func[0]):
+ utils.addToConfig('#define %s 1' % func[1], desc = description)
+ env[func[1]] = 1
+ else:
+ utils.addToConfig('/* #undef %s */' % func[1], desc = description)
+ env[func[1]] = 0
+
+ # HAVE_INTMAX_T
+ # HAVE_DECL_ISTREAMBUF_ITERATOR
+ description = "Define to 1 if you have the `intmax_t' type."
+ if conf.CheckType('intmax_t', includes='#include <stdint.h>') or \
+ conf.CheckType('intmax_t', includes='#include <inttypes.h>'):
+ utils.addToConfig('#define HAVE_INTMAX_T 1', desc = description)
else:
- utils.addToConfig('/* #undef %s */' % header[1], TOP_SRC_DIR)
-
-# HAVE_OPEN
-# HAVE_CLOSE
-# HAVE_POPEN
-# HAVE_PCLOSE
-# HAVE__OPEN
-# HAVE__CLOSE
-# HAVE__POPEN
-# HAVE__PCLOSE
-# HAVE_GETPID
-# HAVE__GETPID
-# HAVE_MKDIR
-# HAVE__MKDIR
-# HAVE_MKTEMP
-# HAVE_MKSTEMP
-# HAVE_STRERROR
-
-# Check functions
-functions = [
- ('open', 'HAVE_OPEN'),
- ('close', 'HAVE_CLOSE'),
- ('popen', 'HAVE_POPEN'),
- ('pclose', 'HAVE_PCLOSE'),
- ('_open', 'HAVE__OPEN'),
- ('_close', 'HAVE__CLOSE'),
- ('_popen', 'HAVE__POPEN'),
- ('_pclose', 'HAVE__PCLOSE'),
- ('getpid', 'HAVE_GETPID'),
- ('_getpid', 'HAVE__GETPID'),
- ('mkdir', 'HAVE_MKDIR'),
- ('_mkdir', 'HAVE__MKDIR'),
- ('mktemp', 'HAVE_MKTEMP'),
- ('mkstemp', 'HAVE_MKSTEMP'),
- ('strerror', 'HAVE_STRERROR')
-]
+ utils.addToConfig('/* #undef HAVE_INTMAX_T */',desc = description)
+
+ # HAVE_INTMAX_T
+ # HAVE_LONG_DOUBLE
+ # HAVE_LONG_LONG
+ # HAVE_WCHAR_T
+ # HAVE_WINT_T
+ # HAVE_INTTYPES_H_WITH_UINTMAX
+ # HAVE_STDINT_H_WITH_UINTMAX
+
+ types = [
+ ('intmax_t', 'HAVE_INTMAX_T', None),
+ ('long double', 'HAVE_LONG_DOUBLE', None),
+ ('long long', 'HAVE_LONG_LONG', None),
+ ('wchar_t', 'HAVE_WCHAR_T', None),
+ ('wint_t', 'HAVE_WINT_T', None),
+ ('uintmax_t', 'HAVE_INTTYPES_H_WITH_UINTMAX', '#include <inttypes.h>'),
+ ('uintmax_t', 'HAVE_STDINT_H_WITH_UINTMAX', '#include <stdint.h>'),
+ ('std::istreambuf_iterator<std::istream>', 'HAVE_DECL_ISTREAMBUF_ITERATOR',
+ '#include <streambuf>\n#include <istream>')
+ ]
+ for t in types:
+ description = "Define to 1 if you have the `%s' type." % t[0]
+ if conf.CheckType(t[0], includes=t[2]):
+ utils.addToConfig('#define %s 1' % t[1], desc = description)
+ else:
+ utils.addToConfig('/* #undef %s */' % t[1], desc = description)
-for func in functions:
- if conf.CheckFunc(func[0]):
- utils.addToConfig('#define %s 1' % func[1], TOP_SRC_DIR)
+ # windows/msvc sys/types.h does not have pid_t
+ # FIXME: #include <windows.h> is the right way?
+ if not conf.CheckType('pid_t', includes='#include <sys/types.h>'):
+ utils.addToConfig('#define pid_t int', desc = 'Define is sys/types.h does not have pid_t')
+
+ # determine the use of std::tolower or tolower
+ description = 'Define if your C++ compiler puts C library functions in the global namespace'
+ if conf.CheckCXXGlobalCstd():
+ utils.addToConfig('#define CXX_GLOBAL_CSTD 1', desc = description)
else:
- utils.addToConfig('/* #undef %s */' % func[1], TOP_SRC_DIR)
-
-# PACKAGE
-# PACKAGE_VERSION
-# DEVEL_VERSION
-utils.addToConfig('#define PACKAGE "%s"' % PACKAGE, TOP_SRC_DIR)
-utils.addToConfig('#define PACKAGE_VERSION "%s"' % PACKAGE_VERSION, TOP_SRC_DIR)
-if DEVEL_VERSION:
- utils.addToConfig('#define DEVEL_VERSION 1', TOP_SRC_DIR)
-
-# ENABLE_ASSERTIONS
-# ENABLE_NLS
-# WITH_WARNINGS
-# _GLIBCXX_CONCEPT_CHECKS
-
-# items are (ENV, ARGUMENTS)
-values = [
- ('ENABLE_ASSERTIONS', 'assertions'),
- ('ENABLE_NLS', 'nls'),
- ('WITH_WARNINGS', 'warnings'),
- ('_GLIBCXX_CONCEPT_CHECKS', 'concept_checks'),
-]
+ utils.addToConfig('/* #undef CXX_GLOBAL_CSTD */', desc = description)
+
+ # HAVE_LIBGDI32
+ # HAVE_ICONV
+ # HAVE_LIBC
+ # HAVE_LIBAIKSAURUS
+ libs = [
+ ('gdi32', 'HAVE_LIBGDI32'),
+ ('iconv', 'HAVE_ICONV'),
+ ('c', 'HAVE_LIBC'),
+ ('Aiksaurus', 'HAVE_LIBAIKSAURUS'),
+ ]
+ for lib in libs:
+ description = "Define to 1 if you have the `%s' library (-l%s)." % (lib[0], lib[0])
+ if conf.CheckLib(lib[0]):
+ utils.addToConfig('#define %s 1' % lib[1], desc = description)
+ env[lib[1]] = True
+ else:
+ utils.addToConfig('/* #undef %s */' % lib[1], desc = description)
+ env[lib[1]] = False
-for val in values:
- if (env.has_key(val[0]) and env[val[0]]) or \
- ARGUMENTS.get(val[1]):
- utils.addToConfig('#define %s 1' % val[0], TOP_SRC_DIR)
+ # HAVE_LC_MESSAGES
+ description = 'Define if your <locale.h> file defines LC_MESSAGES.'
+ if conf.CheckLC_MESSAGES():
+ utils.addToConfig('#define HAVE_LC_MESSAGES 1', desc = description)
else:
- utils.addToConfig('/* #undef %s */' % val[0], TOP_SRC_DIR)
+ utils.addToConfig('/* #undef HAVE_LC_MESSAGES */', desc = description)
+ # ICONV_CONST
+ description = 'Define as const if the declaration of iconv() needs const.'
+ if conf.CheckIconvConst():
+ utils.addToConfig('#define ICONV_CONST', desc = description)
+ else:
+ utils.addToConfig('/* #undef ICONV_CONST */', desc = description)
+
+ # PACKAGE
+ # PACKAGE_VERSION
+ # PACKAGE_BUGREPORT
+ # PACKAGE_NAME
+ # PACKAGE_STRING
+ # DEVEL_VERSION
+ utils.addToConfig('#define PACKAGE "%s%s"' % (PACKAGE, env['PROGRAM_SUFFIX']),
+ desc = "Name of package")
+
+ utils.addToConfig('#define PACKAGE_BUGREPORT "%s"' % PACKAGE_BUGREPORT,
+ desc = 'Define to the address where bug reports for this package should be sent.')
+
+ utils.addToConfig('#define PACKAGE_NAME "%s"' % PACKAGE_NAME,
+ desc = 'Define to the full name of this package.')
+
+ utils.addToConfig('#define PACKAGE_STRING "%s"' % PACKAGE_STRING,
+ desc = "Define to the full name and version of this package.")
+
+ utils.addToConfig('#define PACKAGE_TARNAME "%s"' % PACKAGE_TARNAME,
+ desc = "Define to the one symbol short name of this package.")
+
+ utils.addToConfig('#define PACKAGE_VERSION "%s"' % PACKAGE_VERSION,
+ desc = "Define to the version of this package.")
+
+ if DEVEL_VERSION:
+ utils.addToConfig('#define DEVEL_VERSION 1')
+
+ # ENABLE_ASSERTIONS
+ # ENABLE_NLS
+ # WITH_WARNINGS
+ # _GLIBCXX_CONCEPT_CHECKS
+
+ # items are (ENV, ARGUMENTS)
+ values = [
+ ('ENABLE_ASSERTIONS', 'assertions', 'Define if you want assertions to be enabled in the code'),
+ ('ENABLE_NLS', 'nls', "Define to 1 if translation of program messages to the user's native anguage is requested."),
+ ('WITH_WARNINGS', 'warnings', 'Define this if you want to see the warning directives put here and there by the developpers to get attention'),
+ ('_GLIBCXX_CONCEPT_CHECKS', 'concept_checks', 'libstdc++ concept checking'),
+ ]
+
+ for val in values:
+ if (env.has_key(val[0]) and env[val[0]]) or \
+ (env.has_key(val[1]) and env[val[1]]):
+ utils.addToConfig('#define %s 1' % val[0], desc = val[2])
+ else:
+ utils.addToConfig('/* #undef %s */' % val[0], desc = val[2])
-env['EXTRA_LIBS'] = []
-# HAVE_LIBAIKSAURUS
-# AIKSAURUS_H_LOCATION
-if conf.CheckLib('Aiksaurus'):
- utils.addToConfig("#define HAVE_LIBAIKSAURUS 1", TOP_SRC_DIR)
+ # disable automatic linking of boost libraries.
+ # This is an interesting feature that is supposed to be useful under
+ # windows but since I can not find a way to use it on all platforms,
+ # I disable it for now.
+ utils.addToConfig('#define BOOST_ALL_NO_LIB 1')
+
+ # AIKSAURUS_H_LOCATION
if (conf.CheckCXXHeader("Aiksaurus.h")):
- utils.addToConfig("#define AIKSAURUS_H_LOCATION <Aiksaurus.h>", TOP_SRC_DIR)
+ utils.addToConfig("#define AIKSAURUS_H_LOCATION <Aiksaurus.h>")
elif (conf.CheckCXXHeader("Aiksaurus/Aiksaurus.h")):
- utils.addToConfig("#define AIKSAURUS_H_LOCATION <Aiksaurus/Aiksaurus.h>", TOP_SRC_DIR)
+ utils.addToConfig("#define AIKSAURUS_H_LOCATION <Aiksaurus/Aiksaurus.h>")
else:
- utils.addToConfig("#define AIKSAURUS_H_LOCATION", TOP_SRC_DIR)
- env['EXTRA_LIBS'].append('Aiksaurus')
-
-# USE_ASPELL
-# USE_PSPELL
-# USE_ISPELL
-
-# determine headers to use
-spell_engine = ARGUMENTS.get('spell', 'auto')
-spell_detected = False
-if spell_engine in ['auto', 'aspell'] and \
- conf.CheckLib('aspell'):
- utils.addToConfig('#define USE_ASPELL 1', TOP_SRC_DIR)
- env['USE_ASPELL'] = True
- env['EXTRA_LIBS'].append('aspell')
- spell_detected = True
-elif spell_engine in ['auto', 'pspell'] and \
- conf.CheckLib('pspell'):
- utils.addToConfig('#define USE_PSPELL 1', TOP_SRC_DIR)
- env['USE_PSPELL'] = True
- env['EXTRA_LIBS'].append('pspell')
- spell_detected = True
-elif spell_engine in ['auto', 'ispell'] and \
- conf.CheckLib('ispell'):
- utils.addToConfig('#define USE_ISPELL 1', TOP_SRC_DIR)
- env['USE_ISPELL'] = True
- env['EXTRA_LIBS'].append('ispell')
- spell_detected = True
-
-if not spell_detected:
- # FIXME: can lyx work without an spell engine
- if spell_engine == 'auto':
- print "Warning: Can not locate any spell checker"
+ utils.addToConfig("#define AIKSAURUS_H_LOCATION")
+
+ # USE_ASPELL
+ # USE_PSPELL
+ # USE_ISPELL
+
+ # determine headers to use
+ spell_engine = ARGUMENTS.get('spell', 'auto')
+ spell_detected = False
+ if spell_engine in ['auto', 'aspell'] and \
+ conf.CheckLib('aspell'):
+ utils.addToConfig('#define USE_ASPELL 1', desc = 'Define as 1 to use the aspell library')
+ env['USE_ASPELL'] = True
+ env['USE_PSPELL'] = False
+ env['USE_ISPELL'] = False
+ spell_detected = True
+ elif spell_engine in ['auto', 'pspell'] and \
+ conf.CheckLib('pspell'):
+ utils.addToConfig('#define USE_PSPELL 1', desc = 'Define as 1 to use the pspell library')
+ env['USE_ASPELL'] = False
+ env['USE_PSPELL'] = True
+ env['USE_ISPELL'] = False
+ spell_detected = True
+ elif spell_engine in ['auto', 'ispell'] and \
+ conf.CheckLib('ispell'):
+ utils.addToConfig('#define USE_ISPELL 1', desc = 'Define as 1 to use the ispell library')
+ env['USE_ASPELL'] = False
+ env['USE_PSPELL'] = False
+ env['USE_ISPELL'] = True
+ spell_detected = True
+
+ if not spell_detected:
+ env['USE_ASPELL'] = False
+ env['USE_PSPELL'] = False
+ env['USE_ISPELL'] = False
+ # FIXME: can lyx work without an spell engine
+ if spell_engine == 'auto':
+ print "Warning: Can not locate any spell checker"
+ else:
+ print "Warning: Can not locate specified spell checker:", spell_engine
+
+ # USE_POSIX_PACKAGING
+ # USE_MACOSX_PACKAGING
+ # USE_WINDOWS_PACKAGING
+ if packaging_method == 'windows':
+ utils.addToConfig('#define USE_WINDOWS_PACKAGING 1')
+ elif packaging_method == 'posix':
+ utils.addToConfig('#define USE_POSIX_PACKAGING 1')
+ elif packaging_method == 'mac':
+ utils.addToConfig('#define USE_MACOSX_PACKAGING 1')
+
+ # BOOST_POSIX
+ if boost_posix:
+ utils.addToConfig('#define BOOST_POSIX 1')
else:
- print "Warning: Can not locate specified spell checker:", spell_engine
-
-# USE_POSIX_PACKAGING
-# USE_MACOSX_PACKAGING
-# USE_WINDOWS_PACKAGING
-if packaging_method == 'windows':
- utils.addToConfig('#define USE_WINDOWS_PACKAGING 1', TOP_SRC_DIR)
-elif packaging_method == 'posix':
- utils.addToConfig('#define USE_POSIX_PACKAGING 1', TOP_SRC_DIR)
-elif packaging_method == 'mac':
- utils.addToConfig('#define USE_MACOSX_PACKAGING 1', TOP_SRC_DIR)
-
-# BOOST_POSIX
-if boost_posix:
- utils.addToConfig('#define BOOST_POSIX 1', TOP_SRC_DIR)
-else:
- utils.addToConfig('/* #undef BOOST_POSIX */', TOP_SRC_DIR)
-
-# HAVE_PUTENV
-if conf.CheckPutenv():
- utils.addToConfig('#define HAVE_PUTENV 1', TOP_SRC_DIR)
-else:
- utils.addToConfig('/* #undef HAVE_PUTENV */', TOP_SRC_DIR)
-
-# HAVE_DECL_ISTREAMBUF_ITERATOR
-if conf.CheckIstreambufIterator():
- utils.addToConfig('#define HAVE_DECL_ISTREAMBUF_ITERATOR 1', TOP_SRC_DIR)
-else:
- utils.addToConfig('/* #undef HAVE_DECL_ISTREAMBUF_ITERATOR */', TOP_SRC_DIR)
-
-# MKDIR_TAKES_ONE_ARG
-if conf.CheckMkdirOneArg():
- utils.addToConfig('#define MKDIR_TAKES_ONE_ARG 1', TOP_SRC_DIR)
-else:
- utils.addToConfig('/* #undef MKDIR_TAKES_ONE_ARG */', TOP_SRC_DIR)
+ utils.addToConfig('/* #undef BOOST_POSIX */')
-# HAVE_STD_COUNT
-if conf.CheckStdCount():
- utils.addToConfig('#define HAVE_STD_COUNT 1', TOP_SRC_DIR)
+ # MKDIR_TAKES_ONE_ARG
+ description = 'Define if mkdir takes only one argument.'
+ if conf.CheckMkdirOneArg():
+ utils.addToConfig('#define MKDIR_TAKES_ONE_ARG 1', desc = description)
+ else:
+ utils.addToConfig('/* #undef MKDIR_TAKES_ONE_ARG */', desc = description)
+
+ # SELECT_TYPE_ARG1
+ # SELECT_TYPE_ARG234
+ # SELECT_TYPE_ARG5
+ (arg1, arg234, arg5) = conf.CheckSelectArgType()
+ utils.addToConfig('#define SELECT_TYPE_ARG1 %s' % arg1,
+ desc = "Define to the type of arg 1 for `select'.")
+ utils.addToConfig('#define SELECT_TYPE_ARG234 %s' % arg234,
+ desc = "Define to the type of arg 2, 3, 4 for `select'.")
+ utils.addToConfig('#define SELECT_TYPE_ARG5 %s' % arg5,
+ desc = "Define to the type of arg 5 for `select'.")
+
+ # mkstemp
+ # USE_BOOST_FORMAT
+ # WANT_GETFILEATTRIBUTESEX_WRAPPER
+ utils.endConfigH(TOP_SRC_DIR)
+
+ for key in ['USE_ASPELL', 'USE_PSPELL', 'USE_ISPELL', 'HAVE_ASPRINTF', \
+ 'HAVE_WPRINTF', 'HAVE_SNPRINTF', 'HAVE_POSIX_PRINTF', 'HAVE_FCNTL', \
+ 'HAVE_ICONV', 'HAVE_LIBGDI32', 'HAVE_LIBC', 'HAVE_LIBAIKSAURUS']:
+ env_cache[key] = env[key]
else:
- utils.addToConfig('/* #undef HAVE_STD_COUNT */', TOP_SRC_DIR)
-
-# SELECT_TYPE_ARG1
-# SELECT_TYPE_ARG234
-# SELECT_TYPE_ARG5
-(arg1, arg234, arg5) = conf.CheckSelectArgType()
-utils.addToConfig('#define SELECT_TYPE_ARG1 %s' % arg1, TOP_SRC_DIR)
-utils.addToConfig('#define SELECT_TYPE_ARG234 %s' % arg234, TOP_SRC_DIR)
-utils.addToConfig('#define SELECT_TYPE_ARG5 %s' % arg5, TOP_SRC_DIR)
+ #
+ # this comes as a big surprise, without this line
+ # (doing nothing obvious), adding fast_start=yes
+ # to a build with fast_start=no will result in a rebuild
+ # Note that the exact header file to check does not matter
+ conf.CheckCHeader('io.h')
+ # only a few variables need to be rescanned
+ for key in ['USE_ASPELL', 'USE_PSPELL', 'USE_ISPELL', 'HAVE_ASPRINTF', \
+ 'HAVE_WPRINTF', 'HAVE_SNPRINTF', 'HAVE_POSIX_PRINTF', 'HAVE_FCNTL', \
+ 'HAVE_ICONV', 'HAVE_LIBGDI32', 'HAVE_LIBC', 'HAVE_LIBAIKSAURUS']:
+ env[key] = env_cache[key]
-# mkstemp
-# USE_BOOST_FORMAT
-# WANT_GETFILEATTRIBUTESEX_WRAPPER
-utils.endConfigH(TOP_SRC_DIR)
#
# Finish auto-configuration
env = conf.Finish()
#----------------------------------------------------------
-# Now set up our build process accordingly
+# Now set up our build process accordingly
#----------------------------------------------------------
#
-# QT_LIB etc (EXTRA_LIBS holds lib for each frontend)
+# QT_LIB
#
# NOTE: Tool('qt') or Tool('qt4') will be loaded later
# in their respective directory and specialized env.
if frontend == 'qt3':
# note: env.Tool('qt') my set QT_LIB to qt
env['QT_LIB'] = 'qt-mt'
- env['EXTRA_LIBS'] += ['qt-mt']
+ env['FRONTEND_LIBS'] = ['qt-mt']
if platform_name == 'cygwin' and use_X11:
- env['EXTRA_LIBS'] += ['GL', 'Xmu', 'Xi', 'Xrender', 'Xrandr', 'Xcursor',
- 'Xft', 'freetype', 'fontconfig', 'Xext', 'X11', 'SM', 'ICE', 'resolv',
- 'pthread']
env.AppendUnique(LIBPATH = ['/usr/X11R6/lib'])
elif frontend == 'qt4':
- # local qt4 toolset from
- # http://www.iua.upf.es/~dgarcia/Codders/sconstools.html
if platform_name == "win32":
env['QT_LIB'] = ['QtCore4', 'QtGui4']
else:
env['QT_LIB'] = ['QtCore', 'QtGui']
- env['EXTRA_LIBS'] += [x for x in env['QT_LIB']]
+ env['FRONTEND_LIBS'] = env['QT_LIB']
except:
print "Can not locate qt tools"
print "What I get is "
print " QTDIR: ", env['QTDIR']
-if platform_name in ['win32', 'cygwin']:\r
- env['SYSTEM_LIBS'] = ['shlwapi', 'z']
+
+if platform_name in ['win32', 'cygwin']:
+ # the final link step needs stdc++ to succeed under mingw
+ # FIXME: shouldn't g++ automatically link to stdc++?
+ if use_vc:
+ env['SYSTEM_LIBS'] = ['shlwapi', 'shell32', 'advapi32', 'zdll']
+ else:
+ env['SYSTEM_LIBS'] = ['shlwapi', 'stdc++', 'z']
+elif platform_name == 'cygwin' and use_X11:
+ env['SYSTEM_LIBS'] = ['GL', 'Xmu', 'Xi', 'Xrender', 'Xrandr', 'Xcursor',
+ 'Xft', 'freetype', 'fontconfig', 'Xext', 'X11', 'SM', 'ICE', 'resolv',
+ 'pthread', 'z']
else:
env['SYSTEM_LIBS'] = ['z']
+libs = [
+ ('HAVE_ICONV', 'iconv'),
+ ('HAVE_LIBGDI32', 'gdi32'),
+ ('HAVE_LIBAIKSAURUS', 'Aiksaurus'),
+ ('USE_ASPELL', 'aspell'),
+ ('USE_ISPELL', 'ispell'),
+ ('USE_PSPELL', 'pspell'),
+]
+
+for lib in libs:
+ if env[lib[0]]:
+ env['SYSTEM_LIBS'].append(lib[1])
+
#
# Build parameters CPPPATH etc
#
-# boost is always in
-env.AppendUnique(CPPPATH = ['$TOP_SRC_DIR/boost', '$TOP_SRC_DIR/src'])
+# boost is always in, src is needed for config.h
+#
+# QT_INC_PATH is not needed for *every* source file
+env['CPPPATH'].remove(env['QT_INC_PATH'])
+env['CPPPATH'] += ['$TOP_SRC_DIR/boost', '$TOP_SRC_DIR/src']
-# TODO: add (more) appropriate compiling options (-DNDEBUG etc)
-# for debug/release mode
+# add appropriate compiling options (-DNDEBUG etc)
+# for debug/release mode
if ARGUMENTS.get('mode', default_build_mode) == 'debug':
- env.AppendUnique(CCFLAGS = [])
+ if use_vc:
+ env.AppendUnique(CCFLAGS = [])
+ else:
+ env.AppendUnique(CCFLAGS = ['-Wall', '-g'])
else:
- env.AppendUnique(CCFLAGS = [])
+ if use_vc:
+ env.AppendUnique(CCFLAGS = ['/O2'])
+ else:
+ env.AppendUnique(CCFLAGS = ['-Wall', '-O2'])
#
# Customized builders
#
# install customized builders
env['BUILDERS']['substFile'] = Builder(action = utils.env_subst)
-# FIXME: there must be a better way.
-env['BUILDERS']['fileCopy'] = Builder(action = utils.env_filecopy)
-# install
-env['BUILDERS']['installProg'] = Builder(action = utils.env_installProg)
-env['BUILDERS']['installFile'] = Builder(action = utils.env_installFile)
#
# A Link script for cygwin see
# http://www.cygwin.com/ml/cygwin/2004-09/msg01101.html
# http://www.cygwin.com/ml/cygwin-apps/2004-09/msg00309.html
# for details
-#
-if platform_name == 'cygwin' and env['frontend'] == 'qt3':
+#
+if platform_name == 'cygwin':
ld_script_path = '/usr/lib/qt3/mkspecs/cygwin-g++'
ld_script = utils.installCygwinLDScript(ld_script_path)
- env.AppendUnique(LINKFLAGS = ['-Wl,--enable-runtime-pseudo-reloc',
+ env.AppendUnique(LINKFLAGS = ['-Wl,--enable-runtime-pseudo-reloc',
'-Wl,--script,%s' % ld_script, '-Wl,-s'])
#
# Report results
#
# src/support/package.C.in needs the following to replace
-env['LYX_DIR'] = LYX_DIR
-env['LOCALEDIR'] = LOCALEDIR
-env['TOP_SRCDIR'] = str(Dir('#'))
-env['PROGRAM_SUFFIX'] = PROGRAM_SUFFIX
+# LYX_ABS_INSTALLED_DATADIR (e.g. /usr/local/lyx/share/lyx)
+env['LYX_DIR'] = Dir(env['SHARE_DIR']).abspath
+# LYX_ABS_INSTALLED_LOCALEDIR
+env['LOCALEDIR'] = Dir(env['LOCALE_DIR']).abspath
+# during variable substitution, absolute path is needed.
+env['TOP_SRCDIR'] = Dir(env['TOP_SRC_DIR']).abspath
# needed by src/version.C.in => src/version.C
env['PACKAGE_VERSION'] = PACKAGE_VERSION
# fill in the version info
C++ Compiler flags: %s %s
Linker flags: %s
Linker user flags: %s
-Build info:
+Build info:
Builing directory: %s
Local library directory: %s
Libraries pathes: %s
Boost libraries: %s
- Extra libraries: %s
+ Frontend libraries: %s
System libraries: %s
-Frontend:
+ include search path: %s
+Frontend:
Frontend: %s
Packaging: %s
- LyX binary dir: FIXME
- LyX files dir: FIXME
-''' % (platform_name,
+ LyX dir: %s
+ LyX binary dir: %s
+ LyX files dir: %s
+''' % (platform_name,
env.subst('$CCFLAGS'), env.subst('$CC'),
env.subst('$CPPFLAGS'), env.subst('$CFLAGS'),
env.subst('$CXX'), env.subst('$CXXFLAGS'),
env.subst('$LINKFLAGS'), env.subst('$LINKFLAGS'),
env.subst('$BUILDDIR'), env.subst('$LOCALLIBPATH'),
str(env['LIBPATH']), str(env['BOOST_LIBRARIES']),
- str(env['EXTRA_LIBS']), str(env['SYSTEM_LIBS']),
- env['frontend'], packaging_method)
+ str(env['FRONTEND_LIBS']), str(env['SYSTEM_LIBS']), str(env['CPPPATH']),
+ env['frontend'], packaging_method,
+ env['PREFIX'], env['BIN_DEST_DIR'], env['SHARE_DIR'])
if env['frontend'] in ['qt3', 'qt4']:
env['VERSION_INFO'] += ''' include dir: %s
X11: %s
''' % (env.subst('$QT_INC_PATH'), env.subst('$QT_LIB_PATH'), use_X11)
-print env['VERSION_INFO']
+if not fast_start:
+ print env['VERSION_INFO']
#
-# Mingw command line may be too short for our link usage,
+# Mingw command line may be too short for our link usage,
# Here we use a trick from scons wiki
# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/LongCmdLinesOnWin32
#
# I also would like to add logging (commands only) capacity to the
-# spawn system.
-logfile = ARGUMENTS.get('logfile', default_log_file)
+# spawn system.
+logfile = env.get('logfile', default_log_file)
if logfile != '' or platform_name == 'win32':
import time
utils.setLoggedSpawn(env, logfile, longarg = (platform_name == 'win32'),
info = '''# This is a log of commands used by scons to build lyx
-# Time: %s
+# Time: %s
# Command: %s
# Info: %s
-''' % (time.asctime(), ' '.join(sys.argv),
+''' % (time.asctime(), ' '.join(sys.argv),
env['VERSION_INFO'].replace('\n','\n# ')) )
#
# Cleanup stuff
#
-# save options
-opts.Save('options.cache', env)
# -h will print out help info
Help(opts.GenerateHelpText(env))
-
+# save environment settings (for fast_start option)
+cache_file = open(env_cache_file, 'w')
+cPickle.dump(env_cache, cache_file)
+cache_file.close()
#----------------------------------------------------------
# Start building
#----------------------------------------------------------
Export('env')
-SConsignFile(os.path.abspath('%s/sconsign' % env['BUILDDIR']))
+# this has been the source of problems on some platforms...
+# I find that I need to supply it with full path name
+env.SConsignFile(os.path.join(Dir(env['BUILDDIR']).abspath, '.sconsign'))
+# this usage needs further investigation.
+#env.CacheDir('%s/Cache/%s' % (env['BUILDDIR'], frontend))
env['BUILD_TARGETS'] = BUILD_TARGETS
+if env.has_key('rebuild'):
+ env['REBUILD_TARGETS'] = env['rebuild'].split(',')
+else:
+ env['REBUILD_TARGETS'] = None
print "Building all targets recursively"
projects / lyx.git / blobdiff