-# vi:filetype=python:expandtab:tabstop=2:shiftwidth=2
+# vi:filetype=python:expandtab:tabstop=4:shiftwidth=4
#
# file SConstruct
-#
+#
# This file is part of LyX, the document processor.
# Licence details can be found in the file COPYING.
-#
+#
# \author Bo Peng
# Full author contact details are available in file CREDITS.
#
+# This is a scons based building system for lyx, please refer
+# to INSTALL.scons for detailed instructions.
#
-# This is a scons based building system for lyx, you can use it as follows:
-# (after of course installation of scons from www.scons.org)
-#
-# $ cd development/scons
-# $ scons [options] [targets]
-# or:
-# $ scons -f development/scons/SConstruct [options] [targets]
-#
-# After compiling, you can install lyx by
-# $ scons [prefix=.] install
-#
-# Where:
-# * targets can be one or more of lyx, tex2lyx, client, default to lyx
-# * options: use scons -h for details about parameters, the most important
-# one is frontend=qt3|qt4.
-# * qt3 is used by default on linux, cygwin and mac
-# * qt4 is used by default on win32/mingw
-#
-# File layouts (Important):
-# * Unless you specify builddir=dir, building will happen
-# in $BUILDDIR = $mode, which can be debug or release
-# * $BUILDDIR has subdirectories
-# libs: all intermediate libraries
-# boost: boost libraries, if boost=included is used
-# qt3: build result
-# * lyx executable will be in directories like debug/linux-qt3
-#
-# Hints:
-# * scons --config=force
-# force re-configuration (use scons -H for details)
-#
-# * check config.log to see why config has failed
-#
-# * use extra_inc_path, extra_lib_path, qt_dir, qt_inc_path
-# qt_lib_path to help locate qt and other libraries
-# (there are extra_inc_path1, extra_lib_path1 for now)
-#
-# * (Important) use scons logfile=logfile.log to enable command line
-# logging. (default is no logging)
-#
-# Notes:
-# * Currently, all scons does is building lyx in
-# $LYXROOT/$mode/$build_dir/
-# where $mode is debug or release, $build_dir is the build_dir name
-# listed above
-#
-# * scons install etc may be added later. Interested contributors can follow
-# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/AccumulateBuilder
-# or
-# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/DistTarBuilder
-# Please also see the commented out code in scons_utils.py
-#
-# * NSIS support can be found here.
-# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/NsisSconsTool
-#
-# * rpm support?
-# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/RpmHonchoTemp
-#
-# However, I decide to wait since scons seems to be standardizing these
-# features.
-#
-
-import os, sys
-
-# config/scons_utils.py defines a few utility function
+
+import os, sys, copy, cPickle, glob, time
+
+# scons_utils.py defines a few utility function
sys.path.append('config')
import scons_utils as utils
-
-SetOption('implicit_cache', 1)
+# import all file lists
+from scons_manifest import *
#----------------------------------------------------------
# Required runtime environment
#----------------------------------------------------------
-# FIXME: I remember lyx requires higher version of python?
-EnsurePythonVersion(1, 5)
-# Please use at least 0.96.91 (not 0.96.1)
+# scons asks for 1.5.2, lyx requires 2.3
+EnsurePythonVersion(2, 3)
+# Please use at least 0.96.92 (not 0.96.1)
EnsureSConsVersion(0, 96)
+# also check for minor version number for scons 0.96
+from SCons import __version__
+version = map(int, __version__.split('.'))
+if version[0] == 0 and version[1] == 96 and version[2] < 92:
+ print "Scons >= 0.96.92 is required."
+ Exit(1)
# determine where I am ...
#
-# called as 'scons -f development/scons/SConstruct'
-if os.path.isfile('SConstruct'):
- TOP_SRC_DIR = '../..'
- SCONS_DIR = '.'
# called as 'cd development/scons; scons'
+if os.path.isfile('SConstruct'):
+ top_src_dir = '../..'
+ scons_dir = '.'
+# called as 'scons -f development/scons/SConstruct'
else:
- TOP_SRC_DIR = '.'
- SCONS_DIR = 'development/scons'
+ top_src_dir = '.'
+ scons_dir = 'development/scons'
+
#----------------------------------------------------------
# Global definitions
#----------------------------------------------------------
# some global settings
-PACKAGE_VERSION = '1.5.0svn'
-DEVEL_VERSION = True
+#
+package_version = '1.5.0svn'
+package_cygwin_version = '1.5.0svn-1'
+boost_version = '1_33_1'
+
+devel_version = True
default_build_mode = 'debug'
-PACKAGE = 'lyx'
-PACKAGE_BUGREPORT = 'lyx-devel@lists.lyx.org'
-PACKAGE_NAME = 'LyX'
-PACKAGE_TARNAME = 'lyx'
-PACKAGE_STRING = '%s %s' % (PACKAGE_NAME, PACKAGE_VERSION)
-PROGRAM_SUFFIX = ''
+package = 'lyx'
+package_bugreport = 'lyx-devel@lists.lyx.org'
+package_name = 'LyX'
+package_tarname = 'lyx'
+package_string = '%s %s' % (package_name, package_version)
+
+# various cache/log files
default_log_file = 'scons_lyx.log'
+env_cache_file = 'env.cache'
-# FIXME: what is this? (They are used in src/support/package.C.in
-LOCALEDIR = "../locale/"
-LYX_DIR = "/usr/local/share/lyx"
-# platform dependent default build_dir and other settings
-#
-# I know, somebody would say:
-# This is TOTALLY wrong! Everything should be automatically
-# determined.
-#
+#----------------------------------------------------------
+# platform dependent settings
+#----------------------------------------------------------
+
if os.name == 'nt':
- platform_name = 'win32'
- default_frontend = 'qt4'
- # boost and gettext are unlikely to be installed already
- default_boost_opt = 'included'
- default_gettext_opt = 'included'
- default_pch_opt = False
- default_with_x = False
- spell_checker = 'auto'
- # FIXME: I need to know what exactly is boost_posix
- # EF: It indicates to boost which API to use (posix or windows).
- # If not specified, boost tries to figure out by itself, but it may fail.
- boost_posix = False
- packaging_method = 'windows'
+ platform_name = 'win32'
+ default_frontend = 'qt4'
+ default_prefix = 'c:/program files/lyx'
+ default_with_x = False
+ default_packaging_method = 'windows'
elif os.name == 'posix' and sys.platform != 'cygwin':
- platform_name = sys.platform
- default_frontend = 'qt3'
- # try to use system boost/gettext libraries
- default_boost_opt = 'auto'
- default_gettext_opt = 'auto'
- default_pch_opt = False
- default_with_x = True
- boost_posix = True
- packaging_method = 'posix'
+ platform_name = sys.platform
+ default_frontend = 'qt3'
+ default_prefix = '/usr/local'
+ default_with_x = True
+ default_packaging_method = 'posix'
elif os.name == 'posix' and sys.platform == 'cygwin':
- platform_name = 'cygwin'
- default_frontend = 'qt3'
- # force the use of cygwin/boost/gettext
- default_boost_opt = 'system'
- default_gettext_opt = 'system'
- default_pch_opt = False
- default_with_x = True
- boost_posix = True
- packaging_method = 'posix'
+ platform_name = 'cygwin'
+ default_frontend = 'qt3'
+ default_prefix = '/usr'
+ default_with_x = True
+ default_packaging_method = 'posix'
elif os.name == 'darwin':
- platform_name = 'mac'
- default_frontend = 'qt3'
- # to be safe
- default_boost_opt = 'included'
- default_gettext_opt = 'included'
- default_pch_opt = False
- default_with_x = False
- boost_posix = True
- packaging_method = 'msc'
-else: # unsupported system
- platform_name = 'others'
- default_frontend = 'qt3'
- # to be safe
- default_boost_opt = 'included'
- default_gettext_opt = 'included'
- default_pch_opt = False
- default_with_x = True
- boost_posix = False
- packaging_method = 'posix'
+ platform_name = 'macosx'
+ default_frontend = 'qt3'
+ # FIXME: macOSX default prefix?
+ default_prefix = '.'
+ default_with_x = False
+ default_packaging_method = 'macosx'
+else: # unsupported system, assume posix behavior
+ platform_name = 'others'
+ default_frontend = 'qt3'
+ default_prefix = '.'
+ default_with_x = True
+ default_packaging_method = 'posix'
#---------------------------------------------------------
# Handling options
#----------------------------------------------------------
-# Note that if you set the options via the command line,
-# they will be remembered in the file 'options.cache'
-#
-# NOTE: the scons people are trying to fix scons so that
-# options like --prefix will be accepted. Right now,
-# we have to use the KEY=VALUE style of scons
-#
-if os.path.isfile('options.cache'):
- print "Getting options from auto-saved options.cache..."
- print open('options.cache').read()
+#
+# You can set perminant default values in config.py
if os.path.isfile('config.py'):
- print "Getting options from config.py..."
- print open('config.py').read()
+ print "Getting options from config.py..."
+ print open('config.py').read()
-opts = Options(['options.cache', 'config.py'])
+opts = Options(['config.py'])
opts.AddOptions(
- # frontend,
- EnumOption('frontend', 'Main GUI',
- default_frontend,
- allowed_values = ('xform', 'qt3', 'qt4', 'gtk') ),
- # debug or release build
- EnumOption('mode', 'Building method', default_build_mode,
- allowed_values = ('debug', 'release') ),
- # boost libraries
- EnumOption('boost',
- 'Use included, system boost library, or try sytem first.',
- default_boost_opt,
- allowed_values = (
- 'auto', # detect boost, if not found, use included
- 'included', # always use included boost
- 'system', # always use system boost, fail if can not find
- ) ),
- EnumOption('gettext',
- 'Use included, system gettext library, or try sytem first',
- default_gettext_opt,
- allowed_values = (
- 'auto', # detect gettext, if not found, use included
- 'included', # always use included gettext
- 'system', # always use system gettext, fail if can not find
- ) ),
- # FIXME: I am not allowed to use '' as default, '.' is not good either.
- PathOption('qt_dir', 'Path to qt directory', '.'),
- PathOption('qt_include_path', 'Path to qt include directory', '.'),
- PathOption('qt_lib_path', 'Path to qt library directory', '.'),
- # FIXME: I do not know how pch is working. Ignore this option now.
- BoolOption('pch', '(NA) Whether or not use pch', default_pch_opt),
- # FIXME: Not implemented yet.
- BoolOption('version_suffix', '(NA) Whether or not add version suffix', False),
- # build directory, will replace build_dir if set
- PathOption('build_dir', 'Build directory', '.'),
- # extra include and libpath
- PathOption('extra_inc_path', 'Extra include path', '.'),
- PathOption('extra_lib_path', 'Extra library path', '.'),
- PathOption('extra_inc_path1', 'Extra include path', '.'),
- PathOption('extra_lib_path1', 'Extra library path', '.'),
- # enable assertion, (config.h has ENABLE_ASSERTIOS
- BoolOption('assertions', 'Use assertions', True),
- # enable warning, (config.h has WITH_WARNINGS)
- BoolOption('warnings', 'Use warnings', True),
- # enable glib, (config.h has _GLIBCXX_CONCEPT_CHECKS)
- BoolOption('concept_checks', 'Enable concept checks', True),
- # FIXME: I do not know what is nls
- BoolOption('nls', '(NA) Whether or not use native language support', False),
- # FIXME: not implemented
- BoolOption('profile', '(NA) Whether or not enable profiling', False),
- #
- PathOption('prefix', 'install architecture-independent files in PREFIX', '.'),
- #
- PathOption('exec_prefix', 'install architecture-independent executable files in PREFIX', '.'),
- # FIXME: not implemented
- BoolOption('std_debug', '(NA) Whether or not turn on stdlib debug', False),
- # using x11?
- BoolOption('X11', 'Use x11 windows system', default_with_x),
- # FIXME: not implemented
- BoolOption('libintl', '(NA) Use libintl library', False),
- # FIXME: not implemented
- PathOption('intl_prefix', '(NA) Path to intl library', '.'),
- # log file
- ('logfile', 'save commands (not outputs) to logfile', default_log_file),
- # Path to aikasurus
- PathOption('aikasurus_path', 'Path to aikasurus library', '.'),
- #
- EnumOption('spell', 'Choose spell checker to use.', 'auto',
- allowed_values = ('aspell', 'pspell', 'ispell', 'auto') ),
- # environment variable can be set as options
- ('CC', '$CC', 'gcc'),
- ('CPP', '$CPP', 'gcc -E'),
- ('CXX', '$CXX', 'g++'),
- ('CXXCPP', '$CXXCPP', 'g++ -E'),
- ('CCFLAGS', '$CCFLAGS', ''),
- ('CPPFLAGS', '$CPPFLAGS', ''),
- ('CPPPATH', '$CPPPATH', ''),
- ('LDFLAGS', '$LDFLAGS', ''),
-)
+ # frontend
+ EnumOption('frontend', 'Main GUI', default_frontend,
+ allowed_values = ('qt3', 'qt4', 'gtk') ),
+ # debug or release build
+ EnumOption('mode', 'Building method', default_build_mode,
+ allowed_values = ('debug', 'release') ),
+ # boost libraries
+ EnumOption('boost',
+ 'Use included, system boost library, or try sytem boost first.',
+ 'auto', allowed_values = (
+ 'auto', # detect boost, if not found, use included
+ 'included', # always use included boost
+ 'system', # always use system boost, fail if can not find
+ ) ),
+ #
+ EnumOption('gettext',
+ 'Use included, system gettext library, or try sytem gettext first',
+ 'auto', allowed_values = (
+ 'auto', # detect gettext, if not found, use included
+ 'included', # always use included gettext
+ 'system', # always use system gettext, fail if can not find
+ ) ),
+ #
+ EnumOption('spell', 'Choose spell checker to use.', 'auto',
+ allowed_values = ('aspell', 'pspell', 'ispell', 'auto', 'no') ),
+ # packaging method
+ EnumOption('packaging', 'Packaging method to use.', default_packaging_method,
+ allowed_values = ('windows', 'posix', 'macosx')),
+ #
+ BoolOption('fast_start', 'Whether or not use cached tests and keep current config.h', True),
+ # No precompiled header support (too troublesome to make it work for msvc)
+ # BoolOption('pch', 'Whether or not use pch', False),
+ # enable assertion, (config.h has ENABLE_ASSERTIOS
+ BoolOption('assertions', 'Use assertions', True),
+ # enable warning, (config.h has WITH_WARNINGS)
+ # default to False since MSVC does not have #warning
+ BoolOption('warnings', 'Use warnings', False),
+ # config.h define _GLIBCXX_CONCEPT_CHECKS
+ # Note: for earlier version of gcc (3.3) define _GLIBCPP_CONCEPT_CHECKS
+ BoolOption('concept_checks', 'Enable concept checks', True),
+ #
+ BoolOption('nls', 'Whether or not use native language support', True),
+ #
+ BoolOption('profiling', 'Whether or not enable profiling', False),
+ # config.h define _GLIBCXX_DEBUG and _GLIBCXX_DEBUG_PEDANTIC
+ BoolOption('stdlib_debug', 'Whether or not turn on stdlib debug', False),
+ # using x11?
+ BoolOption('X11', 'Use x11 windows system', default_with_x),
+ # use MS VC++ to build lyx
+ BoolOption('use_vc', 'Use MS VC++ to build lyx (cl.exe will be probed)', None),
+ #
+ PathOption('qt_dir', 'Path to qt directory', None),
+ #
+ PathOption('qt_inc_path', 'Path to qt include directory', None),
+ #
+ PathOption('qt_lib_path', 'Path to qt library directory', None),
+ # extra include and libpath
+ PathOption('extra_inc_path', 'Extra include path', None),
+ #
+ PathOption('extra_lib_path', 'Extra library path', None),
+ #
+ PathOption('extra_bin_path', 'A convenient way to add a path to $PATH', None),
+ #
+ PathOption('extra_inc_path1', 'Extra include path', None),
+ #
+ PathOption('extra_lib_path1', 'Extra library path', None),
+ # rebuild only specifed, comma separated targets
+ ('rebuild', '''rebuild only specifed, comma separated targets.
+ yes or all (default): rebuild everything
+ no or none: rebuild nothing (usually used for installation)
+ comp1,comp2,...: rebuild specified targets''', None),
+ # can be set to a non-existing directory
+ ('prefix', 'install architecture-independent files in PREFIX', default_prefix),
+ # build directory, will use $mode if not set
+ ('build_dir', 'Build directory', None),
+ # version suffix
+ ('version_suffix', 'install lyx as lyx-suffix', None),
+ # how to load options
+ ('load_option', '''load option from previous scons run. option can be
+ yes (default): load all options
+ no: do not load any option
+ opt1,opt2: load specified options
+ -opt1,opt2: load all options other than specified ones''', 'yes'),
+ #
+ ('optimization', 'optimization CCFLAGS option.', None),
+ #
+ PathOption('exec_prefix', 'install architecture-independent executable files in PREFIX', None),
+ # log file
+ ('logfile', 'save commands (not outputs) to logfile', default_log_file),
+ # provided for backward compatibility
+ ('dest_dir', 'install to DESTDIR. (Provided for backward compatibility only)', None),
+ # environment variable can be set as options.
+ ('DESTDIR', 'install to DESTDIR', None),
+ ('CC', 'replace default $CC', None),
+ ('LINK', 'replace default $LINK', None),
+ ('CPP', 'replace default $CPP', None),
+ ('CXX', 'replace default $CXX', None),
+ ('CXXCPP', 'replace default $CXXCPP', None),
+ ('CCFLAGS', 'replace default $CCFLAGS', None),
+ ('CPPFLAGS', 'replace default $CPPFLAGS', None),
+ ('LINKFLAGS', 'replace default $LINKFLAGS', None),
+)
+
+# allowed options
+all_options = [x.key for x in opts.options]
+
+# copied from SCons/Options/BoolOption.py
+# We need to use them before a boolean ARGUMENTS option is available
+# in env as bool.
+true_strings = ('y', 'yes', 'true', 't', '1', 'on' , 'all' )
+false_strings = ('n', 'no', 'false', 'f', '0', 'off', 'none')
+
+# whether or not use current config.h, and cached tests
+#
+# if fast_start=yes (default), load variables from env_cache_file
+if (not ARGUMENTS.has_key('fast_start') or \
+ ARGUMENTS['fast_start'] in true_strings) \
+ and os.path.isfile(env_cache_file):
+ fast_start = True
+ cache_file = open(env_cache_file)
+ env_cache = cPickle.load(cache_file)
+ cache_file.close()
+ print '------------ fast_start mode --------------------'
+ print ' Use cached test results and current config.h'
+ print ' use fast_start=no to override'
+ print
+else:
+ fast_start = False
+ env_cache = {}
+
+# if load_option=yes (default), load saved comand line options
+#
+# This option can take value yes/no/opt1,opt2/-opt1,opt2
+# and tries to be clever in choosing options to load
+if (not ARGUMENTS.has_key('load_option') or \
+ ARGUMENTS['load_option'] not in false_strings) \
+ and os.path.isfile(env_cache_file):
+ cache_file = open(env_cache_file)
+ opt_cache = cPickle.load(cache_file)['arg_cache']
+ cache_file.close()
+ # import cached options, but we should ignore qt_dir when frontend changes
+ if ARGUMENTS.has_key('frontend') and opt_cache.has_key('frontend') \
+ and ARGUMENTS['frontend'] != opt_cache['frontend'] \
+ and opt_cache.has_key('qt_dir'):
+ opt_cache.pop('qt_dir')
+ # some options will require full rebuild
+ # these are in general things that will change config.h
+ for arg in ['version_suffix', 'nls', 'boost', 'spell']:
+ if ARGUMENTS.has_key(arg) and ((not opt_cache.has_key(arg)) or \
+ ARGUMENTS[arg] != opt_cache[arg]):
+ if fast_start:
+ print " ** fast_start is disabled because of the change of option", arg
+ print
+ fast_start = False
+ # and we do not cache some options (dest_dir is obsolete)
+ for arg in ['fast_start', 'load_option', 'dest_dir']:
+ if opt_cache.has_key(arg):
+ opt_cache.pop(arg)
+ # remove obsolete cached keys (well, SConstruct is evolving. :-)
+ for arg in opt_cache.keys():
+ if arg not in all_options:
+ print 'Option %s is obsolete, do not load it' % arg
+ opt_cache.pop(arg)
+ # now, if load_option=opt1,opt2 or -opt1,opt2
+ if ARGUMENTS.has_key('load_option') and \
+ ARGUMENTS['load_option'] not in true_strings + false_strings:
+ # if -opt1,opt2 is specified, do not load these options
+ if ARGUMENTS['load_option'][0] == '-':
+ for arg in ARGUMENTS['load_option'][1:].split(','):
+ if opt_cache.has_key(arg):
+ opt_cache.pop(arg)
+ # if opt1,opt2 is specified, only load specified options
+ else:
+ args = ARGUMENTS['load_option'].split(',')
+ for arg in opt_cache.keys():
+ if arg not in args:
+ opt_cache.pop(arg)
+ # now restore options as if entered from command line
+ for key in opt_cache.keys():
+ if not ARGUMENTS.has_key(key):
+ ARGUMENTS[key] = opt_cache[key]
+ print "Restoring cached option %s=%s" % (key, ARGUMENTS[key])
+ print
+
+# check if there is unused (or misspelled) argument
+for arg in ARGUMENTS.keys():
+ if arg not in all_options:
+ import textwrap
+ print "Unknown option '%s'... exiting." % arg
+ print
+ print "Available options are (check 'scons -help' for details):"
+ print ' ' + '\n '.join(textwrap.wrap(', '.join(all_options)))
+ Exit(1)
+
+# save arguments
+env_cache['arg_cache'] = ARGUMENTS
#---------------------------------------------------------
# Setting up environment
#---------------------------------------------------------
+# I do not really like ENV=os.environ, but you may add it
+# here if you experience some environment related problem
env = Environment(options = opts)
-# Determine the frontend to use, which may be loaded
-# from option cache
-frontend = env.get('frontend', default_frontend)
-use_X11 = env.get('X11', default_with_x)
-
-# set environment since I do not really like ENV = os.environ
+# set individual variables since I do not really like ENV = os.environ
env['ENV']['PATH'] = os.environ.get('PATH')
env['ENV']['HOME'] = os.environ.get('HOME')
-env['TOP_SRC_DIR'] = TOP_SRC_DIR
-env['SCONS_DIR'] = SCONS_DIR
-# install to current directory by default
-env['PREFIX'] = env.get('prefix', '.')
-if env.has_key('exec_prefix') and env['exec_prefix'] != '.':
- env['BIN_DIR'] = env['exec_prefix']
+# these are defined for MSVC
+env['ENV']['LIB'] = os.environ.get('LIB')
+env['ENV']['INCLUDE'] = os.environ.get('INCLUDE')
+
+# for simplicity, use var instead of env[var]
+frontend = env['frontend']
+prefix = env['prefix']
+mode = env['mode']
+
+if platform_name == 'win32':
+ if env.has_key('use_vc'):
+ use_vc = env['use_vc']
+ if WhereIs('cl.exe') is None:
+ print "cl.exe is not found. Are you using the MSVC environment?"
+ Exit(2)
+ elif WhereIs('cl.exe') is not None:
+ use_vc = True
+ else:
+ use_vc = False
else:
- env['BIN_DIR'] = os.path.join(env['PREFIX'], 'bin')
-
-# speed up source file processing
-#env['CPPSUFFIXES'] = ['.C', '.cc', '.cpp']
-#env['CXXSUFFIX'] = ['.C']
-
-def getEnvVariable(env, name):
- # first try command line argument (override environment settings)
- if ARGUMENTS.has_key(name) and ARGUMENTS[name].strip() != '':
- env[name] = ARGUMENTS[name]
- # then try environment variable
- elif os.environ.has_key(name) and os.environ[name].strip() != '':
- env[name] = os.environ[name]
- print "Acquiring varaible %s from system environment: %s" % (name, env[name])
-
-getEnvVariable(env, 'CC')
-getEnvVariable(env, 'CPP')
-getEnvVariable(env, 'CXX')
-getEnvVariable(env, 'CXXCPP')
-getEnvVariable(env, 'CCFLAGS')
-getEnvVariable(env, 'CXXFLAGS')
-getEnvVariable(env, 'CPPFLAGS')
-getEnvVariable(env, 'CPPPATH')
-getEnvVariable(env, 'LDFLAGS')
-
-# under windows, scons is confused by .C/.c and uses gcc instead of
-# g++. I am forcing the use of g++ here. This is expected to change
-# after lyx renames all .C files to .cpp
-if platform_name == 'cygwin':\r
- env['CC'] = 'g++'
- env['LINK'] = 'g++'
+ use_vc = False
-#
-# frontend, mode, BUILDDIR and LOCALLIBPATH=BUILDDIR/libs
-#
-env['frontend'] = frontend
-env['mode'] = env.get('mode', default_build_mode)
# lyx will be built to $build/build_dir so it is possible
-# to build multiple build_dirs using the same source
+# to build multiple build_dirs using the same source
# $mode can be debug or release
-if ARGUMENTS.has_key('build_dir'):
- build_dir = ARGUMENTS['build_dir']
- env['BUILDDIR'] = build_dir
+if env.has_key('build_dir') and env['build_dir'] is not None:
+ # create the directory if needed
+ if not os.path.isdir(env['build_dir']):
+ try:
+ os.makedirs(env['build_dir'])
+ except:
+ pass
+ if not os.path.isdir(env['build_dir']):
+ print 'Can not create directory', env['build_dir']
+ Exit(3)
+ env['BUILDDIR'] = env['build_dir']
else:
- # Determine the name of the build (platform+frontend
- env['BUILDDIR'] = '#' + env['mode']
+ # Determine the name of the build $mode
+ env['BUILDDIR'] = '#' + mode
+
# all built libraries will go to build_dir/libs
# (This is different from the make file approach)
env['LOCALLIBPATH'] = '$BUILDDIR/libs'
env.AppendUnique(LIBPATH = ['$LOCALLIBPATH'])
-#
-# QTDIR, QT_LIB_PATH, QT_INC_PATH
-#
+
+# Here is a summary of variables defined in env
+# 1. defined options
+# 2. undefined options with a non-None default value
+# 3. compiler commands and flags like CCFLAGS.
+# MSGFMT used to process po files
+# 4. Variables that will be used to replace variables in some_file.in
+# src/support/package.C.in:
+# TOP_SRCDIR, LOCALEDIR, LYX_DIR, PROGRAM_SUFFIX
+# lib/lyx2lyx/lyx2lyx_version.py.in
+# PACKAGE_VERSION
+# src/version.C.in
+# PACKAGE_VERSION, LYX_DATE, VERSION_INFO
+
+# full path name is used to build msvs project files
+# and to replace TOP_SRCDIR in package.C
+env['TOP_SRCDIR'] = Dir(top_src_dir).abspath
+# needed by src/version.C.in => src/version.C
+env['PACKAGE_VERSION'] = package_version
+env['LYX_DATE'] = time.asctime()
+
+# determine share_dir etc
+packaging_method = env.get('packaging')
+if packaging_method == 'windows':
+ share_dir = 'Resources'
+ man_dir = 'Resources/man/man1'
+ locale_dir = 'Resources/locale'
+else:
+ share_dir = 'share/lyx'
+ locale_dir = 'share/locale'
+ if platform_name == 'cygwin':
+ man_dir = 'share/man/man1'
+ else:
+ man_dir = 'man/man1'
+
+# program suffix: can be yes, or a string
+if env.has_key('version_suffix'):
+ if env['version_suffix'] in true_strings:
+ program_suffix = package_version
+ elif env['version_suffix'] in false_strings:
+ program_suffix = ''
+ else:
+ program_suffix = env['version_suffix']
+else:
+ program_suffix = ''
+# used by package.C.in
+env['PROGRAM_SUFFIX'] = program_suffix
+
+# whether or not add suffix to file and directory names
+add_suffix = packaging_method != 'windows'
+# LYX_DIR are different (used in package.C.in)
+if add_suffix:
+ env['LYX_DIR'] = Dir(os.path.join(prefix, share_dir + program_suffix)).abspath
+else:
+ env['LYX_DIR'] = Dir(os.path.join(prefix, share_dir)).abspath
+# we need absolute path for package.C
+env['LOCALEDIR'] = Dir(os.path.join(prefix, locale_dir)).abspath
+
+
+#---------------------------------------------------------
+# Setting building environment (Tools, compiler flags etc)
+#---------------------------------------------------------
+
+# Since Tool('mingw') will reset CCFLAGS etc, this should be
+# done before getEnvVariable
if platform_name == 'win32':
- env.Tool('mingw')
-
-if env.has_key('qt_dir') and env['qt_dir'] != '.':
- env['QTDIR'] = env['qt_dir']
- # add path to the qt tools
- env.AppendUnique(LIBPATH = [os.path.join(env['qt_dir'], 'lib')])
- env.AppendUnique(CPPPATH = [os.path.join(env['qt_dir'], 'include')])
- # set environment so that moc etc can be found even if its path is not set properly
- env.PrependENVPath('PATH', os.path.join(env['qt_dir'], 'bin'))
+ if use_vc:
+ env.Tool('msvc')
+ env.Tool('mslink')
+ else:
+ env.Tool('mingw')
+ env.AppendUnique(CPPPATH = ['#c:/MinGW/include'])
+
+# we differentiate between hard-coded options and default options
+# hard-coded options are required and will always be there
+# default options can be replaced by enviromental variables or command line options
+CCFLAGS_required = []
+LINKFLAGS_required = []
+CCFLAGS_default = []
+
+# under windows, scons is confused by .C/.c and uses gcc instead of
+# g++. I am forcing the use of g++ here. This is expected to change
+# after lyx renames all .C files to .cpp
+#
+# save the old c compiler and CCFLAGS (used by libintl)
+C_COMPILER = env.subst('$CC')
+C_CCFLAGS = env.subst('$CCFLAGS').split()
+# if we use ms vc, the commands are fine (cl.exe and link.exe)
+if use_vc:
+ # /TP treat all source code as C++
+ # C4819: The file contains a character that cannot be represented
+ # in the current code page (number)
+ # C4996: foo was decleared deprecated
+ CCFLAGS_required.extend(['/TP', '/EHsc'])
+ CCFLAGS_default.extend(['/wd4819', '/wd4996', '/nologo', '/MD'])
+else:
+ if env.has_key('CXX') and env['CXX']:
+ env['CC'] = env.subst('$CXX')
+ env['LINK'] = env.subst('$CXX')
+ else:
+ env['CC'] = 'g++'
+ env['LINK'] = 'g++'
+
+# for debug/release mode
+if env.has_key('optimization') and env['optimization'] is not None:
+ # if user supplies optimization flags, use it anyway
+ CCFLAGS_required.extend(env['optimization'].split())
+ # and do not use default
+ set_default_optimization_flags = False
else:
- env['QTDIR'] = os.environ.get('QTDIR', '/usr/lib/qt-3.3')
+ set_default_optimization_flags = True
-if env.has_key('qt_lib_path') and env['qt_lib_path'] != '.':
- env['QT_LIB_PATH'] = env['qt_lib_path']
+if mode == 'debug':
+ if use_vc:
+ CCFLAGS_required.append('/Zi')
+ LINKFLAGS_required.extend(['/debug', '/map'])
+ else:
+ CCFLAGS_required.append('-g')
+ CCFLAGS_default.append('-O')
+elif mode == 'release' and set_default_optimization_flags:
+ if use_vc:
+ CCFLAGS_default.append('/O2')
+ else:
+ CCFLAGS_default.append('-O2')
+
+# msvc uses separate tools for profiling
+if env.has_key('profiling') and env['profiling']:
+ if use_vc:
+ print 'Visual C++ does not use profiling options'
+ else:
+ CCFLAGS_required.append('-pg')
+ LINKFLAGS_required.append('-pg')
+
+if env.has_key('warnings') and env['warnings']:
+ if use_vc:
+ CCFLAGS_default.append('/W2')
+ else:
+ # Note: autotools detect gxx version and pass -W for 3.x
+ # and -Wextra for other versions of gcc
+ CCFLAGS_default.append('-Wall')
+
+# Now, set the variables as follows:
+# 1. if command line option exists: replace default
+# 2. then if s envronment variable exists: replace default
+# 3. set variable to required + default
+def setEnvVariable(env, name, required = None, default = None, split = True):
+ ''' env: environment to set variable
+ name: variable
+ required: hardcoded options
+ default: default options that can be replaced by command line or
+ environment variables
+ split: whether or not split obtained variable like '-02 -g'
+ '''
+ # 1. ARGUMENTS is already set to env[name], override default.
+ if ARGUMENTS.has_key(name):
+ default = None
+ # then use environment default
+ elif os.environ.has_key(name):
+ print "Acquiring variable %s from system environment: %s" % (name, os.environ[name])
+ default = os.environ[name]
+ if split:
+ default = default.split()
+ # the real value should be env[name] + default + required
+ if split:
+ value = []
+ if env.has_key(name):
+ value = str(env[name]).split()
+ if required is not None:
+ value += required
+ if default is not None:
+ value += default
+ else:
+ value = ""
+ if env.has_key(name):
+ value = str(env[name])
+ if required is not None:
+ value += " " + required
+ if default is not None:
+ value += " " + default
+ env[name] = value
+ # print name, env[name]
+
+setEnvVariable(env, 'DESTDIR', split=False)
+setEnvVariable(env, 'CC')
+setEnvVariable(env, 'LINK')
+setEnvVariable(env, 'CPP')
+setEnvVariable(env, 'CXX')
+setEnvVariable(env, 'CXXCPP')
+setEnvVariable(env, 'CCFLAGS', CCFLAGS_required, CCFLAGS_default)
+setEnvVariable(env, 'CXXFLAGS')
+setEnvVariable(env, 'CPPFLAGS')
+setEnvVariable(env, 'LINKFLAGS', LINKFLAGS_required)
+
+# if DESTDIR is not set...
+if env.has_key('dest_dir'):
+ print "This option is obsolete. Please use DESTDIR instead."
+ env['DESTDIR'] = env['dest_dir']
+
+
+#---------------------------------------------------------
+# Frontend related variables (QTDIR etc)
+#---------------------------------------------------------
+
+if env.has_key('qt_dir') and env['qt_dir']:
+ env['QTDIR'] = env['qt_dir']
+elif os.path.isdir(os.environ.get('QTDIR', '/usr/lib/qt-3.3')):
+ env['QTDIR'] = os.environ.get('QTDIR', '/usr/lib/qt-3.3')
+
+# if there is a valid QTDIR, set path for lib and bin directories
+if env.has_key('QTDIR'):
+ # add path to the qt tools
+ if os.path.isdir(os.path.join(env['QTDIR'], 'lib')):
+ env.AppendUnique(LIBPATH = [os.path.join(env['QTDIR'], 'lib')])
+ # set environment so that moc etc can be found even if its path is not set properly
+ if os.path.isdir(os.path.join(env['QTDIR'], 'bin')):
+ os.environ['PATH'] += os.pathsep + os.path.join(env['QTDIR'], 'bin')
+ env.PrependENVPath('PATH', os.path.join(env['QTDIR'], 'bin'))
+
+if env.has_key('qt_lib_path') and env['qt_lib_path']:
+ qt_lib_path = env.subst('$qt_lib_path')
+elif env.has_key('QTDIR') and os.path.isdir(os.path.join(env.subst('$QTDIR'), 'lib')):
+ qt_lib_path = env.subst('$QTDIR/lib')
+# this is the path for cygwin.
+elif os.path.isdir(os.path.join('/usr/lib/', frontend, 'lib')):
+ qt_lib_path = '/usr/lib/%s/lib' % frontend
else:
- env['QT_LIB_PATH'] = '$QTDIR/lib'
-env.AppendUnique(LIBPATH = ['$QT_LIB_PATH'])
+ print "Qt library directory is not found. Please specify it using qt_lib_path"
+ Exit(1)
+env.AppendUnique(LIBPATH = [qt_lib_path])
# qt4 seems to be using pkg_config
-env.PrependENVPath('PKG_CONFIG_PATH', env.subst('$QT_LIB_PATH'))
-
-if env.has_key('qt_inc_path') and env['qt_inc_path'] != '.':
- env['QT_INC_PATH'] = env['qt_inc_path']
-elif os.path.isdir(os.path.join(env.subst('$QTDIR'), 'include')):
- env['QT_INC_PATH'] = '$QTDIR/include'
-else: # have to guess
- env['QT_INC_PATH'] = '/usr/include/$frontend/'
-env.AppendUnique(CPPPATH = env['QT_INC_PATH'])
+env.PrependENVPath('PKG_CONFIG_PATH', qt_lib_path)
+
+if env.has_key('qt_inc_path') and env['qt_inc_path']:
+ qt_inc_path = env['qt_inc_path']
+elif env.has_key('QTDIR') and os.path.isdir(os.path.join(env.subst('$QTDIR'), 'include')):
+ qt_inc_path = '$QTDIR/include'
+# this is the path for cygwin.
+elif os.path.isdir('/usr/include/' + frontend):
+ qt_inc_path = '/usr/include/' + frontend
+else:
+ print "Qt include directory not found. Please specify it using qt_inc_path"
+ Exit(1)
+# Note that this CPPPATH is for testing only
+# it will be removed before calling SConscript
+env['CPPPATH'] = [qt_inc_path]
#
# extra_inc_path and extra_lib_path
#
-if env.has_key('extra_inc_path'):
- env.AppendUnique(CPPPATH = [env['extra_inc_path']])
-if env.has_key('extra_lib_path'):
- env.AppendUnique(LIBPATH = [env['extra_lib_path']])
-if env.has_key('extra_inc_path1'):
- env.AppendUnique(CPPPATH = [env['extra_inc_path1']])
-if env.has_key('extra_lib_path1'):
- env.AppendUnique(LIBPATH = [env['extra_lib_path1']])
-if env.has_key('aikasurus_path'):
- env.AppendUnique(LIBPATH = [env['aikasurus_path']])
+extra_inc_paths = []
+if env.has_key('extra_inc_path') and env['extra_inc_path']:
+ extra_inc_paths.append(env['extra_inc_path'])
+if env.has_key('extra_lib_path') and env['extra_lib_path']:
+ env.AppendUnique(LIBPATH = [env['extra_lib_path']])
+if env.has_key('extra_inc_path1') and env['extra_inc_path1']:
+ extra_inc_paths.append(env['extra_inc_path1'])
+if env.has_key('extra_lib_path1') and env['extra_lib_path1']:
+ env.AppendUnique(LIBPATH = [env['extra_lib_path1']])
+if env.has_key('extra_bin_path') and env['extra_bin_path']:
+ # only the first one is needed (a scons bug?)
+ os.environ['PATH'] += os.pathsep + env['extra_bin_path']
+ env.PrependENVPath('PATH', env['extra_bin_path'])
+# extra_inc_paths will be used later by intlenv etc
+env.AppendUnique(CPPPATH = extra_inc_paths)
-#
-# this is a bit out of place (after auto-configration)
-# but it is required to do the tests.
-if platform_name == 'win32':
- env.AppendUnique(CPPPATH = ['#c:/MinGW/include'])
#----------------------------------------------------------
-# Autoconf business
+# Autoconf business
#----------------------------------------------------------
conf = Configure(env,
- custom_tests = {
- 'CheckPkgConfig' : utils.checkPkgConfig,
- 'CheckPackage' : utils.checkPackage,
- 'CheckPutenv' : utils.checkPutenv,
- 'CheckIstreambufIterator' : utils.checkIstreambufIterator,
- 'CheckMkdirOneArg' : utils.checkMkdirOneArg,
- 'CheckStdCount' : utils.checkStdCount,
- 'CheckSelectArgType' : utils.checkSelectArgType,
- 'CheckBoostLibraries' : utils.checkBoostLibraries,
- }
+ custom_tests = {
+ 'CheckPkgConfig' : utils.checkPkgConfig,
+ 'CheckPackage' : utils.checkPackage,
+ 'CheckMkdirOneArg' : utils.checkMkdirOneArg,
+ 'CheckSelectArgType' : utils.checkSelectArgType,
+ 'CheckBoostLibraries' : utils.checkBoostLibraries,
+ 'CheckCommand' : utils.checkCommand,
+ 'CheckCXXGlobalCstd' : utils.checkCXXGlobalCstd,
+ 'CheckLC_MESSAGES' : utils.checkLC_MESSAGES,
+ 'CheckIconvConst' : utils.checkIconvConst,
+ 'CheckSizeOfWChar' : utils.checkSizeOfWChar,
+ }
)
# pkg-config? (if not, we use hard-coded options)
-if conf.CheckPkgConfig('0.15.0'):
- env['HAS_PKG_CONFIG'] = True
+if not fast_start:
+ if conf.CheckPkgConfig('0.15.0'):
+ env['HAS_PKG_CONFIG'] = True
+ else:
+ print 'pkg-config >= 0.1.50 is not found'
+ env['HAS_PKG_CONFIG'] = False
+ env_cache['HAS_PKG_CONFIG'] = env['HAS_PKG_CONFIG']
else:
- print 'pkg-config >= 0.1.50 is not found'
- env['HAS_PKG_CONFIG'] = False
-
-# zlib? This is required.
-if not conf.CheckLibWithHeader('z', 'zlib.h', 'C'):
- print 'Did not find libz or zlib.h, exiting!'
- Exit(1)
+ env['HAS_PKG_CONFIG'] = env_cache['HAS_PKG_CONFIG']
+
+# zlib? This is required. (fast_start assumes the existance of zlib)
+if not fast_start:
+ if (not use_vc and not conf.CheckLibWithHeader('z', 'zlib.h', 'C')) \
+ or (use_vc and not conf.CheckLibWithHeader('zdll', 'zlib.h', 'C')):
+ print 'Did not find zdll.lib or zlib.h, exiting!'
+ Exit(1)
+ if conf.CheckLib('iconv'):
+ env['ICONV_LIB'] = ['iconv']
+ elif conf.CheckLib('libiconv'):
+ env['ICONV_LIB'] = ['libiconv']
+ elif conf.CheckFunc('iconv_open'):
+ env['ICONV_LIB'] = []
+ else:
+ print 'Did not find iconv or libiconv, exiting!'
+ Exit(1)
+ env_cache['ICONV_LIB'] = env['ICONV_LIB']
+else:
+ env['ICONV_LIB'] = env_cache['ICONV_LIB']
# qt libraries?
-#
-# qt3 does not use pkg_config
-if env['frontend'] == 'qt3':
- if not conf.CheckLibWithHeader('qt-mt', 'qapp.h', 'c++', 'QApplication qapp();'):
- print 'Did not find qt libraries, exiting!'
- Exit(1)
-elif env['frontend'] == 'qt4':
- succ = False
- # first: try pkg_config
- if env['HAS_PKG_CONFIG']:
- succ = conf.CheckPackage('QtCore') or conf.CheckPackage('QtCore4')
- env['QT4_PKG_CONFIG'] = succ
- # second: try to link to it
- if not succ:
- # FIXME: under linux, I can test the following perfectly
- # However, under windows, lib names need to passed as libXXX4.a ...
- succ = conf.CheckLibWithHeader('QtCore', 'QtGui/QApplication', 'c++', 'QApplication qapp();') or \
- conf.CheckLibWithHeader('QtCore4', 'QtGui/QApplication', 'c++', 'QApplication qapp();')
- # third: try to look up the path
- if not succ:
- succ = True
- for lib in ['QtCore', 'QtGui']:
- # windows version has something like QtGui4 ...
- if not (os.path.isfile(os.path.join(env.subst('$QT_LIB_PATH'), 'lib%s.a' % lib)) or \
- os.path.isfile(os.path.join(env.subst('$QT_LIB_PATH'), 'lib%s4.a' % lib))):
+if not fast_start:
+ #
+ # qt3 does not use pkg_config
+ if frontend == 'qt3':
+ # windows lib name is qt-mt3
+ if not conf.CheckLibWithHeader('qt-mt', 'qapp.h', 'c++', 'QApplication qapp();') \
+ and not conf.CheckLibWithHeader('qt-mt3', 'qapp.h', 'c++', 'QApplication qapp();'):
+ print 'Did not find qt libraries, exiting!'
+ Exit(1)
+ elif frontend == 'qt4':
succ = False
- break
- # still can not find it
- if succ:
- print "Qt4 libraries are found."
- else:
- print 'Did not find qt libraries, exiting!'
- Exit(1)
+ # first: try pkg_config
+ if env['HAS_PKG_CONFIG']:
+ succ = conf.CheckPackage('QtCore') or conf.CheckPackage('QtCore4')
+ # FIXME: use pkg_config information?
+ #env['QT4_PKG_CONFIG'] = succ
+ # second: try to link to it
+ if not succ:
+ # Under linux, I can test the following perfectly
+ # Under windows, lib names need to passed as libXXX4.a ...
+ succ = conf.CheckLibWithHeader('QtCore', 'QtGui/QApplication', 'c++', 'QApplication qapp();') or \
+ conf.CheckLibWithHeader('QtCore4', 'QtGui/QApplication', 'c++', 'QApplication qapp();')
+ # third: try to look up the path
+ if not succ:
+ succ = True
+ for lib in ['QtCore', 'QtGui']:
+ # windows version has something like QtGui4 ...
+ if not (os.path.isfile(os.path.join(qt_lib_path, 'lib%s.a' % lib)) or \
+ os.path.isfile(os.path.join(qt_lib_path, 'lib%s4.a' % lib))):
+ succ = False
+ break
+ # still can not find it
+ if succ:
+ print "Qt4 libraries are found."
+ else:
+ print 'Did not find qt libraries, exiting!'
+ Exit(1)
+
+# now, if msvc2005 is used, we will need that QT_LIB_PATH/QT_LIB.manifest file
+if use_vc:
+ if frontend == 'qt3':
+ manifest = os.path.join(qt_lib_path, 'qt-mt3.dll.manifest')
+ elif frontend == 'qt4':
+ if mode == 'debug':
+ manifest = os.path.join(qt_lib_path, 'QtGuid4.dll.manifest')
+ else:
+ manifest = os.path.join(qt_lib_path, 'QtGui4.dll.manifest')
+ if os.path.isfile(manifest):
+ env['LINKCOM'] = [env['LINKCOM'], 'mt.exe /MANIFEST %s /outputresource:$TARGET;1' % manifest]
# check socket libs
-env['SYSTEM_LIBS'] = []
-if conf.CheckLib('socket'):
- env['SYSTEM_LIBS'].append('socket')
-
-# EF: This is the network services library and provides a
-# transport-level interface to networking services.
-if conf.CheckLib('nsl'):
- env['SYSTEM_LIBS'].append('nsl')
-
-# check boost libraries
-boost_opt = ARGUMENTS.get('boost', default_boost_opt)
-# check for system boost
-succ = False
-if boost_opt in ['auto', 'system']:
- pathes = env['LIBPATH'] + ['/usr/lib', '/usr/local/lib']
- sig = conf.CheckBoostLibraries('boost_signals', pathes)
- reg = conf.CheckBoostLibraries('boost_regex', pathes)
- fil = conf.CheckBoostLibraries('boost_filesystem', pathes)
- ios = conf.CheckBoostLibraries('boost_iostreams', pathes)
- # if any them is not found
- if ('' in [sig[0], reg[0], fil[0], ios[0]]):
- if boost_opt == 'system':
- print "Can not find system boost libraries"
- print "Please supply a path through extra_lib_path"
- print "and try again."
- Exit(2)
- else:
- env['BOOST_LIBRARIES'] = [sig[1], reg[1], fil[1], ios[1]]
- # assume all boost libraries are in the same path...
- print sig[0]
- env.AppendUnique(LIBPATH = [sig[0]])
- env['INCLUDED_BOOST'] = False
- succ = True
-# now, auto and succ = false, or included
-if not succ:
- # we do not need to set LIBPATH now.
- env['BOOST_LIBRARIES'] = ['boost_signals', 'boost_regex',
- 'boost_filesystem', 'boost_iostreams']
- env['INCLUDED_BOOST'] = True
-
-#
-# Building config.h
-#
-
-print "Generating ", utils.config_h, "..."
-
-# I do not handle all macros in src/config.h.in, rather I am following a list
-# of *used-by-lyx* macros compiled by Abdelrazak Younes <younes.a@free.fr>
-#
-# Note: addToConfig etc are defined in scons_util
-utils.startConfigH(TOP_SRC_DIR)
-
-# HAVE_IO_H
-# HAVE_LIMITS_H
-# HAVE_LOCALE_H
-# HAVE_LOCALE
-# HAVE_PROCESS_H
-# HAVE_STDLIB_H
-# HAVE_SYS_STAT_H
-# HAVE_SYS_TIME_H
-# HAVE_SYS_TYPES_H
-# HAVE_SYS_UTIME_H
-# HAVE_UNISTD_H
-# HAVE_UTIME_H
-# HAVE_ISTREAM
-# HAVE_OSTREAM
-# HAVE_IOS
-
-# Check header files
-headers = [
- ('io.h', 'HAVE_IO_H', 'c'),
- ('limits.h', 'HAVE_LIMITS_H', 'c'),
- ('locale.h', 'HAVE_LOCALE_H', 'c'),
- ('locale', 'HAVE_LOCALE', 'cxx'),
- ('process.h', 'HAVE_PROCESS_H', 'c'),
- ('stdlib.h', 'HAVE_STDLIB_H', 'c'),
- ('sys/stat.h', 'HAVE_SYS_STAT_H', 'c'),
- ('sys/time.h', 'HAVE_SYS_TIME_H', 'c'),
- ('sys/types.h', 'HAVE_SYS_TYPES_H', 'c'),
- ('sys/utime.h', 'HAVE_SYS_UTIME_H', 'c'),
- ('sys/socket.h', 'HAVE_SYS_SOCKET_H', 'c'),
- ('unistd.h', 'HAVE_UNISTD_H', 'c'),
- ('utime.h', 'HAVE_UTIME_H', 'c'),
- ('istream', 'HAVE_ISTREAM', 'cxx'),
- ('ostream', 'HAVE_OSTREAM', 'cxx'),
- ('ios', 'HAVE_IOS', 'cxx')
-]
+if not fast_start:
+ socket_libs = []
+ if conf.CheckLib('socket'):
+ socket_libs.append('socket')
+ # nsl is the network services library and provides a
+ # transport-level interface to networking services.
+ if conf.CheckLib('nsl'):
+ socket_libs.append('nsl')
+ env_cache['SOCKET_LIBS'] = socket_libs
+else:
+ socket_libs = env_cache['SOCKET_LIBS']
+
+# check available boost libs (since lyx1.4 does not use iostream)
+boost_libs = []
+for lib in ['signals', 'regex', 'filesystem', 'iostreams']:
+ if os.path.isdir(os.path.join(top_src_dir, 'boost', 'libs', lib)):
+ boost_libs.append(lib)
+
+if not fast_start:
+ # check boost libraries
+ boost_opt = ARGUMENTS.get('boost', 'auto')
+ # check for system boost
+ lib_paths = env['LIBPATH'] + ['/usr/lib', '/usr/local/lib']
+ inc_paths = env['CPPPATH'] + ['/usr/include', '/usr/local/include']
+ # default to $BUILDDIR/libs (use None since this path will be added anyway)
+ boost_libpath = None
+ # here I assume that all libraries are in the same directory
+ if boost_opt == 'included':
+ boost_libraries = ['included_boost_%s' % x for x in boost_libs]
+ included_boost = True
+ env['BOOST_INC_PATH'] = '$TOP_SRCDIR/boost'
+ elif boost_opt == 'auto':
+ res = conf.CheckBoostLibraries(boost_libs, lib_paths, inc_paths, boost_version, mode == 'debug')
+ # if not found, use local boost
+ if res[0] is None:
+ boost_libraries = ['included_boost_%s' % x for x in boost_libs]
+ included_boost = True
+ env['BOOST_INC_PATH'] = '$TOP_SRCDIR/boost'
+ else:
+ included_boost = False
+ (boost_libraries, boost_libpath, env['BOOST_INC_PATH']) = res
+ elif boost_opt == 'system':
+ res = conf.CheckBoostLibraries(boost_libs, lib_paths, inc_paths, boost_version, mode == 'debug')
+ if res[0] is None:
+ print "Can not find system boost libraries with version %s " % boost_version
+ print "Please supply a path through extra_lib_path and try again."
+ print "Or use boost=included to use included boost libraries."
+ Exit(2)
+ else:
+ included_boost = False
+ (boost_libraries, boost_libpath, env['BOOST_INC_PATH']) = res
+ env_cache['BOOST_LIBRARIES'] = boost_libraries
+ env_cache['INCLUDED_BOOST'] = included_boost
+ env_cache['BOOST_INC_PATH'] = env['BOOST_INC_PATH']
+ env_cache['BOOST_LIBPATH'] = boost_libpath
+else:
+ boost_libraries = env_cache['BOOST_LIBRARIES']
+ included_boost = env_cache['INCLUDED_BOOST']
+ env['BOOST_INC_PATH'] = env_cache['BOOST_INC_PATH']
+ boost_libpath = env_cache['BOOST_LIBPATH']
-for header in headers:
- if (header[2] == 'c' and conf.CheckCHeader(header[0])) or \
- (header[2] == 'cxx' and conf.CheckCXXHeader(header[0])):
- utils.addToConfig('#define %s 1' % header[1], TOP_SRC_DIR)
- else:
- utils.addToConfig('/* #undef %s */' % header[1], TOP_SRC_DIR)
-
-# HAVE_OPEN
-# HAVE_CLOSE
-# HAVE_POPEN
-# HAVE_PCLOSE
-# HAVE__OPEN
-# HAVE__CLOSE
-# HAVE__POPEN
-# HAVE__PCLOSE
-# HAVE_GETPID
-# HAVE__GETPID
-# HAVE_MKDIR
-# HAVE__MKDIR
-# HAVE_MKTEMP
-# HAVE_MKSTEMP
-# HAVE_STRERROR
-# HAVE_FCNTL
-
-# Check functions
-functions = [
- ('open', 'HAVE_OPEN'),
- ('close', 'HAVE_CLOSE'),
- ('popen', 'HAVE_POPEN'),
- ('pclose', 'HAVE_PCLOSE'),
- ('_open', 'HAVE__OPEN'),
- ('_close', 'HAVE__CLOSE'),
- ('_popen', 'HAVE__POPEN'),
- ('_pclose', 'HAVE__PCLOSE'),
- ('getpid', 'HAVE_GETPID'),
- ('_getpid', 'HAVE__GETPID'),
- ('mkdir', 'HAVE_MKDIR'),
- ('_mkdir', 'HAVE__MKDIR'),
- ('mktemp', 'HAVE_MKTEMP'),
- ('mkstemp', 'HAVE_MKSTEMP'),
- ('strerror', 'HAVE_STRERROR'),
- ('fcntl', 'HAVE_FCNTL')
-]
+if boost_libpath is not None:
+ env.AppendUnique(LIBPATH = [boost_libpath])
-for func in functions:
- if conf.CheckFunc(func[0]):
- utils.addToConfig('#define %s 1' % func[1], TOP_SRC_DIR)
- else:
- utils.addToConfig('/* #undef %s */' % func[1], TOP_SRC_DIR)
-
-# PACKAGE
-# PACKAGE_VERSION
-# DEVEL_VERSION
-utils.addToConfig('#define PACKAGE "%s"' % PACKAGE, TOP_SRC_DIR)
-utils.addToConfig('#define PACKAGE_VERSION "%s"' % PACKAGE_VERSION, TOP_SRC_DIR)
-if DEVEL_VERSION:
- utils.addToConfig('#define DEVEL_VERSION 1', TOP_SRC_DIR)
-
-# ENABLE_ASSERTIONS
-# ENABLE_NLS
-# WITH_WARNINGS
-# _GLIBCXX_CONCEPT_CHECKS
-
-# items are (ENV, ARGUMENTS)
-values = [
- ('ENABLE_ASSERTIONS', 'assertions'),
- ('ENABLE_NLS', 'nls'),
- ('WITH_WARNINGS', 'warnings'),
- ('_GLIBCXX_CONCEPT_CHECKS', 'concept_checks'),
-]
-for val in values:
- if (env.has_key(val[0]) and env[val[0]]) or \
- ARGUMENTS.get(val[1]):
- utils.addToConfig('#define %s 1' % val[0], TOP_SRC_DIR)
- else:
- utils.addToConfig('/* #undef %s */' % val[0], TOP_SRC_DIR)
-
-
-env['EXTRA_LIBS'] = []
-# HAVE_LIBAIKSAURUS
-# AIKSAURUS_H_LOCATION
-if conf.CheckLib('Aiksaurus'):
- utils.addToConfig("#define HAVE_LIBAIKSAURUS 1", TOP_SRC_DIR)
- if (conf.CheckCXXHeader("Aiksaurus.h")):
- utils.addToConfig("#define AIKSAURUS_H_LOCATION <Aiksaurus.h>", TOP_SRC_DIR)
- elif (conf.CheckCXXHeader("Aiksaurus/Aiksaurus.h")):
- utils.addToConfig("#define AIKSAURUS_H_LOCATION <Aiksaurus/Aiksaurus.h>", TOP_SRC_DIR)
- else:
- utils.addToConfig("#define AIKSAURUS_H_LOCATION", TOP_SRC_DIR)
- env['EXTRA_LIBS'].append('Aiksaurus')
-
-# USE_ASPELL
-# USE_PSPELL
-# USE_ISPELL
-
-# determine headers to use
-spell_engine = ARGUMENTS.get('spell', 'auto')
-spell_detected = False
-if spell_engine in ['auto', 'aspell'] and \
- conf.CheckLib('aspell'):
- utils.addToConfig('#define USE_ASPELL 1', TOP_SRC_DIR)
- env['USE_ASPELL'] = True
- env['EXTRA_LIBS'].append('aspell')
- spell_detected = True
-elif spell_engine in ['auto', 'pspell'] and \
- conf.CheckLib('pspell'):
- utils.addToConfig('#define USE_PSPELL 1', TOP_SRC_DIR)
- env['USE_PSPELL'] = True
- env['EXTRA_LIBS'].append('pspell')
- spell_detected = True
-elif spell_engine in ['auto', 'ispell'] and \
- conf.CheckLib('ispell'):
- utils.addToConfig('#define USE_ISPELL 1', TOP_SRC_DIR)
- env['USE_ISPELL'] = True
- env['EXTRA_LIBS'].append('ispell')
- spell_detected = True
-
-if not spell_detected:
- # FIXME: can lyx work without an spell engine
- if spell_engine == 'auto':
- print "Warning: Can not locate any spell checker"
- else:
- print "Warning: Can not locate specified spell checker:", spell_engine
-
-# USE_POSIX_PACKAGING
-# USE_MACOSX_PACKAGING
-# USE_WINDOWS_PACKAGING
-if packaging_method == 'windows':
- utils.addToConfig('#define USE_WINDOWS_PACKAGING 1', TOP_SRC_DIR)
-elif packaging_method == 'posix':
- utils.addToConfig('#define USE_POSIX_PACKAGING 1', TOP_SRC_DIR)
-elif packaging_method == 'mac':
- utils.addToConfig('#define USE_MACOSX_PACKAGING 1', TOP_SRC_DIR)
-
-# BOOST_POSIX
-if boost_posix:
- utils.addToConfig('#define BOOST_POSIX 1', TOP_SRC_DIR)
-else:
- utils.addToConfig('/* #undef BOOST_POSIX */', TOP_SRC_DIR)
+env['ENABLE_NLS'] = env['nls']
-# HAVE_PUTENV
-if conf.CheckPutenv():
- utils.addToConfig('#define HAVE_PUTENV 1', TOP_SRC_DIR)
-else:
- utils.addToConfig('/* #undef HAVE_PUTENV */', TOP_SRC_DIR)
-
-# HAVE_DECL_ISTREAMBUF_ITERATOR
-if conf.CheckIstreambufIterator():
- utils.addToConfig('#define HAVE_DECL_ISTREAMBUF_ITERATOR 1', TOP_SRC_DIR)
+if not fast_start:
+ if not env['ENABLE_NLS']:
+ intl_libs = []
+ included_gettext = False
+ else:
+ # check gettext libraries
+ gettext_opt = ARGUMENTS.get('gettext', 'auto')
+ # check for system gettext
+ succ = False
+ if gettext_opt in ['auto', 'system']:
+ if conf.CheckLib('intl'):
+ included_gettext = False
+ intl_libs = ['intl']
+ succ = True
+ else: # no found
+ if gettext_opt == 'system':
+ print "Can not find system gettext library"
+ print "Please supply a path through extra_lib_path and try again."
+ print "Or use gettext=included to use included gettext libraries."
+ Exit(2)
+ # now, auto and succ = false, or gettext=included
+ if not succ:
+ # we do not need to set LIBPATH now.
+ included_gettext = True
+ intl_libs = ['included_intl']
+ env_cache['INCLUDED_GETTEXT'] = included_gettext
+ env_cache['INTL_LIBS'] = intl_libs
else:
- utils.addToConfig('/* #undef HAVE_DECL_ISTREAMBUF_ITERATOR */', TOP_SRC_DIR)
+ included_gettext = env_cache['INCLUDED_GETTEXT']
+ intl_libs = env_cache['INTL_LIBS']
-# MKDIR_TAKES_ONE_ARG
-if conf.CheckMkdirOneArg():
- utils.addToConfig('#define MKDIR_TAKES_ONE_ARG 1', TOP_SRC_DIR)
+#
+# check for msgfmt command
+if not fast_start:
+ env['MSGFMT'] = conf.CheckCommand('msgfmt')
+ env_cache['MSGFMT'] = env['MSGFMT']
else:
- utils.addToConfig('/* #undef MKDIR_TAKES_ONE_ARG */', TOP_SRC_DIR)
+ env['MSGFMT'] = env_cache['MSGFMT']
-# HAVE_STD_COUNT
-if conf.CheckStdCount():
- utils.addToConfig('#define HAVE_STD_COUNT 1', TOP_SRC_DIR)
-else:
- utils.addToConfig('/* #undef HAVE_STD_COUNT */', TOP_SRC_DIR)
+# cygwin packaging requires the binaries to be stripped
+if platform_name == 'cygwin':
+ if not fast_start:
+ env['STRIP'] = conf.CheckCommand('strip')
+ env_cache['STRIP'] = env['STRIP']
+ else:
+ env['STRIP'] = env_cache['STRIP']
+
+# check uic and moc commands for qt frontends
+if not fast_start:
+ if frontend[:2] == 'qt' and (conf.CheckCommand('uic') == None \
+ or conf.CheckCommand('moc') == None):
+ print 'uic or moc command is not found for frontend', frontend
+ Exit(1)
+
+#
+# Customized builders
+#
+# install customized builders
+env['BUILDERS']['substFile'] = Builder(action = utils.env_subst)
+
+
+#----------------------------------------------------------
+# Generating config.h
+#----------------------------------------------------------
+aspell_lib = 'aspell'
+# assume that we use aspell, aspelld compiled for msvc
+if platform_name == 'win32' and mode == 'debug' and use_vc:
+ aspell_lib = 'aspelld'
+
+# check the existence of config.h
+config_h = os.path.join(env.Dir('$BUILDDIR/common').path, 'config.h')
+boost_config_h = os.path.join(env.Dir('$BUILDDIR/boost').path, 'config.h')
+if not fast_start or not os.path.isfile(boost_config_h) \
+ or not os.path.isfile(config_h):
+ #
+ print "Creating %s..." % boost_config_h
+ #
+ utils.createConfigFile(conf,
+ config_file = boost_config_h,
+ config_pre = '''/* boost/config.h. Generated by SCons. */
+
+/* -*- C++ -*- */
+/*
+* \file config.h
+* This file is part of LyX, the document processor.
+* Licence details can be found in the file COPYING.
+*
+* This is the compilation configuration file for LyX.
+* It was generated by scon.
+* You might want to change some of the defaults if something goes wrong
+* during the compilation.
+*/
+
+#ifndef _BOOST_CONFIG_H
+#define _BOOST_CONFIG_H
+''',
+ headers = [
+ ('ostream', 'HAVE_OSTREAM', 'cxx'),
+ ('locale', 'HAVE_LOCALE', 'cxx'),
+ ('sstream', 'HAVE_SSTREAM', 'cxx'),
+ #('newapis.h', 'HAVE_NEWAPIS_H', 'c'),
+ ],
+ custom_tests = [
+ (env.has_key('assertions') and env['assertions'],
+ 'ENABLE_ASSERTIONS',
+ 'Define if you want assertions to be enabled in the code'
+ ),
+ ],
+ types = [
+ ('wchar_t', 'HAVE_WCHAR_T', None),
+ ],
+ config_post = '''
+
+#if defined(HAVE_OSTREAM) && defined(HAVE_LOCALE) && defined(HAVE_SSTREAM)
+# define USE_BOOST_FORMAT 1
+#else
+# define USE_BOOST_FORMAT 0
+#endif
+
+#if !defined(ENABLE_ASSERTIONS)
+# define BOOST_DISABLE_ASSERTS 1
+#endif
+#define BOOST_ENABLE_ASSERT_HANDLER 1
+
+#define BOOST_DISABLE_THREADS 1
+#define BOOST_NO_WSTRING 1
+
+#ifdef __CYGWIN__
+# define BOOST_POSIX 1
+# define BOOST_POSIX_API 1
+# define BOOST_POSIX_PATH 1
+#endif
+
+#define BOOST_ALL_NO_LIB 1
+
+#if defined(HAVE_NEWAPIS_H)
+# define WANT_GETFILEATTRIBUTESEX_WRAPPER 1
+#endif
+
+#endif
+'''
+ )
+ #
+ print "\nGenerating %s..." % config_h
+
+ # AIKSAURUS_H_LOCATION
+ if (conf.CheckCXXHeader("Aiksaurus.h")):
+ aik_location = '<Aiksaurus.h>'
+ elif (conf.CheckCXXHeader("Aiksaurus/Aiksaurus.h")):
+ aik_location = '<Aiksaurus/Aiksaurus.h>'
+ else:
+ aik_location = ''
+
+ # determine headers to use
+ spell_opt = ARGUMENTS.get('spell', 'auto')
+ env['USE_ASPELL'] = False
+ env['USE_PSPELL'] = False
+ env['USE_ISPELL'] = False
+ if spell_opt in ['auto', 'aspell'] and conf.CheckLib(aspell_lib):
+ spell_engine = 'USE_ASPELL'
+ elif spell_opt in ['auto', 'pspell'] and conf.CheckLib('pspell'):
+ spell_engine = 'USE_PSPELL'
+ elif spell_opt in ['auto', 'ispell'] and conf.CheckLib('ispell'):
+ spell_engine = 'USE_ISPELL'
+ else:
+ spell_engine = None
-# SELECT_TYPE_ARG1
-# SELECT_TYPE_ARG234
-# SELECT_TYPE_ARG5
-(arg1, arg234, arg5) = conf.CheckSelectArgType()
-utils.addToConfig('#define SELECT_TYPE_ARG1 %s' % arg1, TOP_SRC_DIR)
-utils.addToConfig('#define SELECT_TYPE_ARG234 %s' % arg234, TOP_SRC_DIR)
-utils.addToConfig('#define SELECT_TYPE_ARG5 %s' % arg5, TOP_SRC_DIR)
+ if spell_engine is not None:
+ env[spell_engine] = True
+ else:
+ if spell_opt == 'auto':
+ print "Warning: Can not locate any spell checker"
+ elif spell_opt != 'no':
+ print "Warning: Can not locate specified spell checker:", spell_opt
+ Exit(1)
+
+ # check arg types of select function
+ (select_arg1, select_arg234, select_arg5) = conf.CheckSelectArgType()
+
+ # check the size of wchar_t
+ sizeof_wchar_t = conf.CheckSizeOfWChar()
+ # something wrong
+ if sizeof_wchar_t == 0:
+ print 'Error: Can not determine the size of wchar_t.'
+ Exit(1)
+
+ #
+ # create config.h
+ result = utils.createConfigFile(conf,
+ config_file = config_h,
+ config_pre = '''/* config.h. Generated by SCons. */
+
+/* -*- C++ -*- */
+/*
+* \file config.h
+* This file is part of LyX, the document processor.
+* Licence details can be found in the file COPYING.
+*
+* This is the compilation configuration file for LyX.
+* It was generated by scon.
+* You might want to change some of the defaults if something goes wrong
+* during the compilation.
+*/
+
+#ifndef _CONFIG_H
+#define _CONFIG_H
+''',
+ headers = [
+ ('io.h', 'HAVE_IO_H', 'c'),
+ ('limits.h', 'HAVE_LIMITS_H', 'c'),
+ ('locale.h', 'HAVE_LOCALE_H', 'c'),
+ ('process.h', 'HAVE_PROCESS_H', 'c'),
+ ('stdlib.h', 'HAVE_STDLIB_H', 'c'),
+ ('sys/stat.h', 'HAVE_SYS_STAT_H', 'c'),
+ ('sys/time.h', 'HAVE_SYS_TIME_H', 'c'),
+ ('sys/types.h', 'HAVE_SYS_TYPES_H', 'c'),
+ ('sys/utime.h', 'HAVE_SYS_UTIME_H', 'c'),
+ ('sys/socket.h', 'HAVE_SYS_SOCKET_H', 'c'),
+ ('unistd.h', 'HAVE_UNISTD_H', 'c'),
+ ('utime.h', 'HAVE_UTIME_H', 'c'),
+ ('direct.h', 'HAVE_DIRECT_H', 'c'),
+ ('istream', 'HAVE_ISTREAM', 'cxx'),
+ ('ios', 'HAVE_IOS', 'cxx'),
+ ],
+ functions = [
+ ('open', 'HAVE_OPEN', None),
+ ('close', 'HAVE_CLOSE', None),
+ ('popen', 'HAVE_POPEN', None),
+ ('pclose', 'HAVE_PCLOSE', None),
+ ('_open', 'HAVE__OPEN', None),
+ ('_close', 'HAVE__CLOSE', None),
+ ('_popen', 'HAVE__POPEN', None),
+ ('_pclose', 'HAVE__PCLOSE', None),
+ ('getpid', 'HAVE_GETPID', None),
+ ('_getpid', 'HAVE__GETPID', None),
+ ('mkdir', 'HAVE_MKDIR', None),
+ ('_mkdir', 'HAVE__MKDIR', None),
+ ('mktemp', 'HAVE_MKTEMP', None),
+ ('mkstemp', 'HAVE_MKSTEMP', None),
+ ('strerror', 'HAVE_STRERROR', None),
+ ('count', 'HAVE_STD_COUNT', '''
+#include <algorithm>
+int count()
+{
+ char a[] = "hello";
+ return std::count(a, a+5, 'l');
+}
+'''),
+ ('getcwd', 'HAVE_GETCWD', None),
+ ('setenv', 'HAVE_SETENV', None),
+ ('putenv', 'HAVE_PUTENV', None),
+ ('fcntl', 'HAVE_FCNTL', None),
+ ],
+ types = [
+ ('std::istreambuf_iterator<std::istream>', 'HAVE_DECL_ISTREAMBUF_ITERATOR',
+ '#include <streambuf>\n#include <istream>'),
+ ('wchar_t', 'HAVE_WCHAR_T', None),
+ ],
+ libs = [
+ ('gdi32', 'HAVE_LIBGDI32'),
+ (('Aiksaurus', 'libAiksaurus'), 'HAVE_LIBAIKSAURUS', 'AIKSAURUS_LIB'),
+ ],
+ custom_tests = [
+ (conf.CheckType('pid_t', includes='#include <sys/types.h>'),
+ 'HAVE_PID_T',
+ 'Define is sys/types.h does not have pid_t',
+ '',
+ '#define pid_t int',
+ ),
+ (conf.CheckCXXGlobalCstd(),
+ 'CXX_GLOBAL_CSTD',
+ 'Define if your C++ compiler puts C library functions in the global namespace'
+ ),
+ (conf.CheckMkdirOneArg(),
+ 'MKDIR_TAKES_ONE_ARG',
+ 'Define if mkdir takes only one argument.'
+ ),
+ (conf.CheckIconvConst(),
+ 'ICONV_CONST',
+ 'Define as const if the declaration of iconv() needs const.',
+ '#define ICONV_CONST const',
+ '#define ICONV_CONST',
+ ),
+ (conf.CheckLC_MESSAGES(),
+ 'HAVE_LC_MESSAGES',
+ 'Define if your <locale.h> file defines LC_MESSAGES.'
+ ),
+ (devel_version, 'DEVEL_VERSION', 'Whether or not a development version'),
+ (env['nls'],
+ 'ENABLE_NLS',
+ "Define to 1 if translation of program messages to the user's native anguage is requested.",
+ ),
+ (env['nls'] and not included_gettext,
+ 'HAVE_GETTEXT',
+ 'Define to 1 if using system gettext library'
+ ),
+ (env.has_key('warnings') and env['warnings'],
+ 'WITH_WARNINGS',
+ 'Define this if you want to see the warning directives put here and there by the developpers to get attention'
+ ),
+ (env.has_key('concept_checks') and env['concept_checks'],
+ '_GLIBCXX_CONCEPT_CHECKS',
+ 'libstdc++ concept checking'
+ ),
+ (env.has_key('stdlib_debug') and env['stdlib_debug'],
+ '_GLIBCXX_DEBUG',
+ 'libstdc++ debug mode'
+ ),
+ (env.has_key('stdlib_debug') and env['stdlib_debug'],
+ '_GLIBCXX_DEBUG_PEDANTIC',
+ 'libstdc++ pedantic debug mode'
+ ),
+ (os.name != 'nt', 'BOOST_POSIX',
+ 'Indicates to boost < 1.34 which API to use (posix or windows).'
+ ),
+ (os.name != 'nt', 'BOOST_POSIX_API',
+ 'Indicates to boost 1.34 which API to use (posix or windows).'
+ ),
+ (os.name != 'nt', 'BOOST_POSIX_PATH',
+ 'Indicates to boost 1.34 which path style to use (posix or windows).'
+ ),
+ (spell_engine is not None, spell_engine,
+ 'Spell engine to use'
+ ),
+ # we need to know the byte order for unicode conversions
+ (sys.byteorder == 'big', 'WORDS_BIGENDIAN',
+ 'Define to 1 if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel and VAX).'
+ ),
+ ],
+ extra_items = [
+ ('#define PACKAGE "%s%s"' % (package, program_suffix),
+ 'Name of package'),
+ ('#define PACKAGE_BUGREPORT "%s"' % package_bugreport,
+ 'Define to the address where bug reports for this package should be sent.'),
+ ('#define PACKAGE_NAME "%s"' % package_name,
+ 'Define to the full name of this package.'),
+ ('#define PACKAGE_STRING "%s"' % package_string,
+ 'Define to the full name and version of this package.'),
+ ('#define PACKAGE_TARNAME "%s"' % package_tarname,
+ 'Define to the one symbol short name of this package.'),
+ ('#define PACKAGE_VERSION "%s"' % package_version,
+ 'Define to the version of this package.'),
+ ('#define BOOST_ALL_NO_LIB 1',
+ 'disable automatic linking of boost libraries.'),
+ ('#define USE_%s_PACKAGING 1' % packaging_method.upper(),
+ 'Packaging method'),
+ ('#define AIKSAURUS_H_LOCATION ' + aik_location,
+ 'Aiksaurus include file'),
+ ('#define SELECT_TYPE_ARG1 %s' % select_arg1,
+ "Define to the type of arg 1 for `select'."),
+ ('#define SELECT_TYPE_ARG234 %s' % select_arg234,
+ "Define to the type of arg 2, 3, 4 for `select'."),
+ ('#define SELECT_TYPE_ARG5 %s' % select_arg5,
+ "Define to the type of arg 5 for `select'."),
+ ('#define SIZEOF_WCHAR_T %d' % sizeof_wchar_t,
+ 'Define to be the size of type wchar_t'),
+ ],
+ config_post = '''/************************************************************
+** You should not need to change anything beyond this point */
+
+#ifndef HAVE_STRERROR
+#if defined(__cplusplus)
+extern "C"
+#endif
+char * strerror(int n);
+#endif
+
+#ifdef HAVE_MKSTEMP
+#ifndef HAVE_DECL_MKSTEMP
+#if defined(__cplusplus)
+extern "C"
+#endif
+int mkstemp(char*);
+#endif
+#endif
+
+#include <../boost/config.h>
+
+#endif
+'''
+ )
+
+ # these keys are needed in env
+ for key in ['USE_ASPELL', 'USE_PSPELL', 'USE_ISPELL', 'HAVE_FCNTL',\
+ 'HAVE_LIBGDI32', 'HAVE_LIBAIKSAURUS', 'AIKSAURUS_LIB']:
+ # USE_ASPELL etc does not go through result
+ if result.has_key(key):
+ env[key] = result[key]
+ env_cache[key] = env[key]
+
+ #
+ # if nls=yes and gettext=included, create intl/config.h
+ # intl/libintl.h etc
+ #
+ intl_config_h = os.path.join(env.Dir('$BUILDDIR/intl').path, 'config.h')
+ if env['nls'] and included_gettext:
+ #
+ print "Creating %s..." % intl_config_h
+ #
+ # create intl/config.h
+ result = utils.createConfigFile(conf,
+ config_file = intl_config_h,
+ config_pre = '''/* intl/config.h. Generated by SCons. */
+
+/* -*- C++ -*- */
+/*
+* \file config.h
+* This file is part of LyX, the document processor.
+* Licence details can be found in the file COPYING.
+*
+* This is the compilation configuration file for LyX.
+* It was generated by scon.
+* You might want to change some of the defaults if something goes wrong
+* during the compilation.
+*/
+
+#ifndef _CONFIG_H
+#define _CONFIG_H
+''',
+ headers = [
+ ('unistd.h', 'HAVE_UNISTD_H', 'c'),
+ ('inttypes.h', 'HAVE_INTTYPES_H', 'c'),
+ ('string.h', 'HAVE_STRING_H', 'c'),
+ ('strings.h', 'HAVE_STRINGS_H', 'c'),
+ ('argz.h', 'HAVE_ARGZ_H', 'c'),
+ ('limits.h', 'HAVE_LIMITS_H', 'c'),
+ ('alloca.h', 'HAVE_ALLOCA_H', 'c'),
+ ('stddef.h', 'HAVE_STDDEF_H', 'c'),
+ ('stdint.h', 'HAVE_STDINT_H', 'c'),
+ ('sys/param.h', 'HAVE_SYS_PARAM_H', 'c'),
+ ],
+ functions = [
+ ('getcwd', 'HAVE_GETCWD', None),
+ ('stpcpy', 'HAVE_STPCPY', None),
+ ('strcasecmp', 'HAVE_STRCASECMP', None),
+ ('strdup', 'HAVE_STRDUP', None),
+ ('strtoul', 'HAVE_STRTOUL', None),
+ ('alloca', 'HAVE_ALLOCA', None),
+ ('__fsetlocking', 'HAVE___FSETLOCKING', None),
+ ('mempcpy', 'HAVE_MEMPCPY', None),
+ ('__argz_count', 'HAVE___ARGZ_COUNT', None),
+ ('__argz_next', 'HAVE___ARGZ_NEXT', None),
+ ('__argz_stringify', 'HAVE___ARGZ_STRINGIFY', None),
+ ('setlocale', 'HAVE_SETLOCALE', None),
+ ('tsearch', 'HAVE_TSEARCH', None),
+ ('getegid', 'HAVE_GETEGID', None),
+ ('getgid', 'HAVE_GETGID', None),
+ ('getuid', 'HAVE_GETUID', None),
+ ('wcslen', 'HAVE_WCSLEN', None),
+ ('asprintf', 'HAVE_ASPRINTF', None),
+ ('wprintf', 'HAVE_WPRINTF', None),
+ ('snprintf', 'HAVE_SNPRINTF', None),
+ ('printf', 'HAVE_POSIX_PRINTF', None),
+ ('fcntl', 'HAVE_FCNTL', None),
+ ],
+ types = [
+ ('intmax_t', 'HAVE_INTMAX_T', None),
+ ('long double', 'HAVE_LONG_DOUBLE', None),
+ ('long long', 'HAVE_LONG_LONG', None),
+ ('wchar_t', 'HAVE_WCHAR_T', None),
+ ('wint_t', 'HAVE_WINT_T', None),
+ ('uintmax_t', 'HAVE_INTTYPES_H_WITH_UINTMAX', '#include <inttypes.h>'),
+ ('uintmax_t', 'HAVE_STDINT_H_WITH_UINTMAX', '#include <stdint.h>'),
+ ],
+ libs = [
+ ('c', 'HAVE_LIBC'),
+ ],
+ custom_tests = [
+ (conf.CheckLC_MESSAGES(),
+ 'HAVE_LC_MESSAGES',
+ 'Define if your <locale.h> file defines LC_MESSAGES.'
+ ),
+ (conf.CheckIconvConst(),
+ 'ICONV_CONST',
+ 'Define as const if the declaration of iconv() needs const.',
+ '#define ICONV_CONST const',
+ '#define ICONV_CONST',
+ ),
+ (conf.CheckType('intmax_t', includes='#include <stdint.h>') or \
+ conf.CheckType('intmax_t', includes='#include <inttypes.h>'),
+ 'HAVE_INTMAX_T',
+ "Define to 1 if you have the `intmax_t' type."
+ ),
+ (env.has_key('nls') and env['nls'],
+ 'ENABLE_NLS',
+ "Define to 1 if translation of program messages to the user's native anguage is requested.",
+ ),
+ ],
+ extra_items = [
+ ('#define HAVE_ICONV 1', 'Define if iconv or libiconv is found'),
+ ('#define SIZEOF_WCHAR_T %d' % sizeof_wchar_t,
+ 'Define to be the size of type wchar_t'),
+ ],
+ config_post = '#endif'
+ )
+
+ # these keys are needed in env
+ for key in ['HAVE_ASPRINTF', 'HAVE_WPRINTF', 'HAVE_SNPRINTF', \
+ 'HAVE_POSIX_PRINTF', 'HAVE_LIBC']:
+ # USE_ASPELL etc does not go through result
+ if result.has_key(key):
+ env[key] = result[key]
+ env_cache[key] = env[key]
-# mkstemp
-# USE_BOOST_FORMAT
-# WANT_GETFILEATTRIBUTESEX_WRAPPER
-utils.endConfigH(TOP_SRC_DIR)
+else:
+ #
+ # this comes as a big surprise, without this line
+ # (doing nothing obvious), adding fast_start=yes
+ # to a build with fast_start=no will result in a rebuild
+ # Note that the exact header file to check does not matter
+ conf.CheckCHeader('io.h')
+ # only a few variables need to be rescanned
+ for key in ['USE_ASPELL', 'USE_PSPELL', 'USE_ISPELL', 'HAVE_FCNTL',\
+ 'HAVE_LIBGDI32', 'HAVE_LIBAIKSAURUS', 'AIKSAURUS_LIB']:
+ env[key] = env_cache[key]
+ #
+ # nls related keys
+ if env['nls'] and included_gettext:
+ # only a few variables need to be rescanned
+ for key in ['HAVE_ASPRINTF', 'HAVE_WPRINTF', 'HAVE_SNPRINTF', \
+ 'HAVE_POSIX_PRINTF', 'HAVE_LIBC']:
+ env[key] = env_cache[key]
+
+# this looks misplaced, but intl/libintl.h is needed by src/message.C
+if env['nls'] and included_gettext:
+ # libgnuintl.h.in => libintl.h
+ env.substFile('$BUILDDIR/intl/libintl.h', '$TOP_SRCDIR/intl/libgnuintl.h.in')
+ env.Command('$BUILDDIR/intl/libgnuintl.h', '$BUILDDIR/intl/libintl.h',
+ [Copy('$TARGET', '$SOURCE')])
#
# Finish auto-configuration
env = conf.Finish()
#----------------------------------------------------------
-# Now set up our build process accordingly
+# Now set up our build process accordingly
#----------------------------------------------------------
#
-# QT_LIB etc (EXTRA_LIBS holds lib for each frontend)
+# QT_LIB
#
# NOTE: Tool('qt') or Tool('qt4') will be loaded later
# in their respective directory and specialized env.
-try:
- if frontend == 'qt3':
+if frontend == 'qt3':
# note: env.Tool('qt') my set QT_LIB to qt
- env['QT_LIB'] = 'qt-mt'
- env['EXTRA_LIBS'] += ['qt-mt']
- if platform_name == 'cygwin' and use_X11:
- env['EXTRA_LIBS'] += ['GL', 'Xmu', 'Xi', 'Xrender', 'Xrandr', 'Xcursor',
- 'Xft', 'freetype', 'fontconfig', 'Xext', 'X11', 'SM', 'ICE', 'resolv',
- 'pthread']
- env.AppendUnique(LIBPATH = ['/usr/X11R6/lib'])
- elif frontend == 'qt4':
- # local qt4 toolset from
- # http://www.iua.upf.es/~dgarcia/Codders/sconstools.html
- if platform_name == "win32":
- env['QT_LIB'] = ['QtCore4', 'QtGui4']
+ if platform_name == 'win32':
+ qt_libs = ['qt-mt3']
+ else:
+ qt_libs = ['qt-mt']
+ frontend_libs = qt_libs
+elif frontend == 'qt4':
+ qt_libs = ['QtCore', 'QtGui']
+ # set the right lib names
+ if platform_name == 'win32':
+ if mode == 'debug' and use_vc:
+ qt_lib_suffix = 'd4'
+ else:
+ qt_lib_suffix = '4'
else:
- env['QT_LIB'] = ['QtCore', 'QtGui']
- env['EXTRA_LIBS'] += [x for x in env['QT_LIB']]
-except:
- print "Can not locate qt tools"
- print "What I get is "
- print " QTDIR: ", env['QTDIR']
-
-if platform_name in ['win32', 'cygwin']:\r
- env['SYSTEM_LIBS'] += ['shlwapi', 'z']
+ if mode == 'debug':
+ qt_lib_suffix = '_debug'
+ else:
+ qt_lib_suffix = ''
+ frontend_libs = [x + qt_lib_suffix for x in qt_libs]
+
+
+system_libs = env['ICONV_LIB']
+if platform_name in ['win32', 'cygwin']:
+ # the final link step needs stdc++ to succeed under mingw
+ # FIXME: shouldn't g++ automatically link to stdc++?
+ if use_vc:
+ system_libs += ['ole32', 'shlwapi', 'shell32', 'advapi32', 'zdll']
+ else:
+ system_libs += ['shlwapi', 'stdc++', 'z']
+elif platform_name == 'cygwin' and env['X11']:
+ system_libs += ['GL', 'Xmu', 'Xi', 'Xrender', 'Xrandr',
+ 'Xcursor', 'Xft', 'freetype', 'fontconfig', 'Xext', 'X11', 'SM', 'ICE',
+ 'resolv', 'pthread', 'z']
else:
- env['SYSTEM_LIBS'] += ['z']
+ system_libs += ['z']
+
+libs = [
+ ('HAVE_LIBGDI32', 'gdi32'),
+ ('HAVE_LIBAIKSAURUS', env['AIKSAURUS_LIB']),
+ ('USE_ASPELL', aspell_lib),
+ ('USE_ISPELL', 'ispell'),
+ ('USE_PSPELL', 'pspell'),
+]
+
+for lib in libs:
+ if env[lib[0]]:
+ system_libs.append(lib[1])
#
# Build parameters CPPPATH etc
#
-# boost is always in
-env.AppendUnique(CPPPATH = ['$TOP_SRC_DIR/boost', '$TOP_SRC_DIR/src'])
+if env['X11']:
+ env.AppendUnique(LIBPATH = ['/usr/X11R6/lib'])
-# TODO: add (more) appropriate compiling options (-DNDEBUG etc)
-# for debug/release mode
-if ARGUMENTS.get('mode', default_build_mode) == 'debug':
- env.AppendUnique(CCFLAGS = [])
+#
+# boost: for boost header files
+# BUILDDIR/common: for config.h
+# TOP_SRCDIR/src: for support/* etc
+#
+env['CPPPATH'] += ['$BUILDDIR/common', '$TOP_SRCDIR/src']
+#
+# Separating boost directories from CPPPATH stops scons from building
+# the dependency tree for boost header files, and effectively reduce
+# the null build time of lyx from 29s to 16s. Since lyx may tweak local
+# boost headers, this is only done for system boost headers.
+if included_boost:
+ env.AppendUnique(CPPPATH = ['$BOOST_INC_PATH'])
else:
- env.AppendUnique(CCFLAGS = [])
+ if use_vc:
+ env.PrependUnique(CCFLAGS = ['/I$BOOST_INC_PATH'])
+ else:
+ env.PrependUnique(CCFLAGS = ['-I$BOOST_INC_PATH'])
+# for intl/config.h, intl/libintl.h and intl/libgnuintl.h
+if env['nls'] and included_gettext:
+ env['CPPPATH'].append('$BUILDDIR/intl')
#
-# Customized builders
-#
-# install customized builders
-env['BUILDERS']['substFile'] = Builder(action = utils.env_subst)
-# FIXME: there must be a better way.
-env['BUILDERS']['fileCopy'] = Builder(action = utils.env_filecopy)
+# QT_INC_PATH is not needed for *every* source file
+env['CPPPATH'].remove(qt_inc_path)
#
# A Link script for cygwin see
# http://www.cygwin.com/ml/cygwin/2004-09/msg01101.html
# http://www.cygwin.com/ml/cygwin-apps/2004-09/msg00309.html
# for details
-#
-if platform_name == 'cygwin' and env['frontend'] == 'qt3':
- ld_script_path = '/usr/lib/qt3/mkspecs/cygwin-g++'
- ld_script = utils.installCygwinLDScript(ld_script_path)
- env.AppendUnique(LINKFLAGS = ['-Wl,--enable-runtime-pseudo-reloc',
- '-Wl,--script,%s' % ld_script, '-Wl,-s'])
+#
+if platform_name == 'cygwin':
+ ld_script_path = '/tmp'
+ ld_script = utils.installCygwinLDScript(ld_script_path)
+ env.AppendUnique(LINKFLAGS = ['-Wl,--enable-runtime-pseudo-reloc',
+ '-Wl,--script,%s' % ld_script, '-Wl,-s'])
#
# Report results
#
-# src/support/package.C.in needs the following to replace
-env['LYX_DIR'] = LYX_DIR
-env['LOCALEDIR'] = LOCALEDIR
-env['TOP_SRCDIR'] = str(Dir('#'))
-env['PROGRAM_SUFFIX'] = PROGRAM_SUFFIX
-# needed by src/version.C.in => src/version.C
-env['PACKAGE_VERSION'] = PACKAGE_VERSION
# fill in the version info
env['VERSION_INFO'] = '''Configuration
Host type: %s
C++ Compiler flags: %s %s
Linker flags: %s
Linker user flags: %s
-Build info:
+Build info:
Builing directory: %s
Local library directory: %s
- Libraries pathes: %s
+ Libraries paths: %s
Boost libraries: %s
- Extra libraries: %s
+ Frontend libraries: %s
System libraries: %s
-Frontend:
+ include search path: %s
+Frontend:
Frontend: %s
Packaging: %s
- LyX binary dir: FIXME
- LyX files dir: FIXME
-''' % (platform_name,
- env.subst('$CCFLAGS'), env.subst('$CC'),
- env.subst('$CPPFLAGS'), env.subst('$CFLAGS'),
- env.subst('$CXX'), env.subst('$CXXFLAGS'),
- env.subst('$CPPFLAGS'), env.subst('$CXXFLAGS'),
- env.subst('$LINKFLAGS'), env.subst('$LINKFLAGS'),
- env.subst('$BUILDDIR'), env.subst('$LOCALLIBPATH'),
- str(env['LIBPATH']), str(env['BOOST_LIBRARIES']),
- str(env['EXTRA_LIBS']), str(env['SYSTEM_LIBS']),
- env['frontend'], packaging_method)
-
-if env['frontend'] in ['qt3', 'qt4']:
- env['VERSION_INFO'] += ''' include dir: %s
+ LyX dir: %s
+ LyX files dir: %s
+''' % (platform_name,
+ env.subst('$CCFLAGS'), env.subst('$CC'),
+ env.subst('$CPPFLAGS'), env.subst('$CFLAGS'),
+ env.subst('$CXX'), env.subst('$CXXFLAGS'),
+ env.subst('$CPPFLAGS'), env.subst('$CXXFLAGS'),
+ env.subst('$LINKFLAGS'), env.subst('$LINKFLAGS'),
+ env.subst('$BUILDDIR'), env.subst('$LOCALLIBPATH'),
+ str(env['LIBPATH']), str(boost_libraries),
+ str(frontend_libs), str(system_libs), str(env['CPPPATH']),
+ frontend, packaging_method,
+ prefix, env['LYX_DIR'])
+
+if frontend in ['qt3', 'qt4']:
+ env['VERSION_INFO'] += ''' include dir: %s
library dir: %s
X11: %s
-''' % (env.subst('$QT_INC_PATH'), env.subst('$QT_LIB_PATH'), use_X11)
+''' % (qt_inc_path, qt_lib_path, env['X11'])
-print env['VERSION_INFO']
+if not fast_start:
+ print env['VERSION_INFO']
#
-# Mingw command line may be too short for our link usage,
+# Mingw command line may be too short for our link usage,
# Here we use a trick from scons wiki
# http://www.scons.org/cgi-sys/cgiwrap/scons/moin.cgi/LongCmdLinesOnWin32
#
# I also would like to add logging (commands only) capacity to the
-# spawn system.
-logfile = ARGUMENTS.get('logfile', default_log_file)
+# spawn system.
+logfile = env.get('logfile', default_log_file)
if logfile != '' or platform_name == 'win32':
- import time
- utils.setLoggedSpawn(env, logfile, longarg = (platform_name == 'win32'),
- info = '''# This is a log of commands used by scons to build lyx
-# Time: %s
+ import time
+ utils.setLoggedSpawn(env, logfile, longarg = (platform_name == 'win32'),
+ info = '''# This is a log of commands used by scons to build lyx
+# Time: %s
# Command: %s
# Info: %s
-''' % (time.asctime(), ' '.join(sys.argv),
- env['VERSION_INFO'].replace('\n','\n# ')) )
+''' % (time.asctime(), ' '.join(sys.argv),
+ env['VERSION_INFO'].replace('\n','\n# ')) )
-#
# Cleanup stuff
#
-# save options
-opts.Save('options.cache', env)
# -h will print out help info
Help(opts.GenerateHelpText(env))
+# save environment settings (for fast_start option)
+cache_file = open(env_cache_file, 'w')
+cPickle.dump(env_cache, cache_file)
+cache_file.close()
+
#----------------------------------------------------------
# Start building
#----------------------------------------------------------
-Export('env')
+# this has been the source of problems on some platforms...
+# I find that I need to supply it with full path name
+env.SConsignFile(os.path.join(Dir(env['BUILDDIR']).abspath, '.sconsign'))
+# this usage needs further investigation.
+#env.CacheDir('%s/Cache/%s' % (env['BUILDDIR'], frontend))
-SConsignFile(os.path.abspath('%s/sconsign' % env['BUILDDIR']))
+print "Building all targets recursively"
-env['BUILD_TARGETS'] = BUILD_TARGETS
+if env.has_key('rebuild'):
+ rebuild_targets = env['rebuild'].split(',')
+ if 'none' in rebuild_targets or 'no' in rebuild_targets:
+ rebuild_targets = []
+ elif 'all' in rebuild_targets or 'yes' in rebuild_targets:
+ # None: let scons decide which components to build
+ # Forcing all components to be rebuilt is in theory not necessary
+ rebuild_targets = None
+else:
+ rebuild_targets = None
+
+def libExists(libname):
+ ''' Check whether or not lib $LOCALLIBNAME/libname already exists'''
+ return os.path.isfile(File(env.subst('$LOCALLIBPATH/${LIBPREFIX}%s$LIBSUFFIX'%libname)).abspath)
+
+def appExists(apppath, appname):
+ ''' Check whether or not application already exists'''
+ return os.path.isfile(File(env.subst('$BUILDDIR/common/%s/${PROGPREFIX}%s$PROGSUFFIX' % (apppath, appname))).abspath)
+
+targets = BUILD_TARGETS
+# msvc need to pass full target name, so I have to look for path/lyx etc
+build_lyx = targets == [] or True in ['lyx' in x for x in targets] \
+ or 'install' in targets or 'all' in targets
+build_boost = (included_boost and not libExists('boost_regex')) or 'boost' in targets
+build_intl = (included_gettext and not libExists('included_intl')) or 'intl' in targets
+build_support = build_lyx or True in [x in targets for x in ['support', 'client', 'tex2lyx']]
+build_mathed = build_lyx or 'mathed' in targets
+build_insets = build_lyx or 'insets' in targets
+build_frontends = build_lyx or 'frontends' in targets
+build_graphics = build_lyx or 'graphics' in targets
+build_controllers = build_lyx or 'controllers' in targets
+build_client = True in ['client' in x for x in targets] \
+ or 'install' in targets or 'all' in targets
+build_tex2lyx = True in ['tex2lyx' in x for x in targets] \
+ or 'install' in targets or 'all' in targets
+build_lyxbase = build_lyx or 'lyxbase' in targets
+build_po = 'po' in targets or 'install' in targets or 'all' in targets
+build_qt3 = (build_lyx and frontend == 'qt3') or 'qt3' in targets
+build_qt4 = (build_lyx and frontend == 'qt4') or 'qt4' in targets
+build_msvs_projects = use_vc and 'msvs_projects' in targets
+
+
+# now, if rebuild_targets is specified, do not rebuild some targets
+if rebuild_targets is not None:
+ #
+ def ifBuildLib(name, libname, old_value):
+ # explicitly asked to rebuild
+ if name in rebuild_targets:
+ return True
+ # else if not rebuild, and if the library already exists
+ elif libExists(libname):
+ return False
+ # do not change the original value
+ else:
+ return old_value
+ build_boost = ifBuildLib('boost', 'included_boost_filesystem', build_boost)
+ build_intl = ifBuildLib('intl', 'included_intl', build_intl)
+ build_support = ifBuildLib('support', 'support', build_support)
+ build_mathed = ifBuildLib('mathed', 'mathed', build_mathed)
+ build_insets = ifBuildLib('insets', 'insets', build_insets)
+ build_frontends = ifBuildLib('frontends', 'frontends', build_frontends)
+ build_graphics = ifBuildLib('graphics', 'graphics', build_graphics)
+ build_controllers = ifBuildLib('controllers', 'controllers', build_controllers)
+ build_lyxbase = ifBuildLib('lyxbase', 'lyxbase_pre', build_lyxbase)
+ build_qt3 = ifBuildLib('qt3', 'qt3', build_qt3)
+ build_qt4 = ifBuildLib('qt4', 'qt4', build_qt4)
+ #
+ def ifBuildApp(name, appname, old_value):
+ # explicitly asked to rebuild
+ if name in rebuild_targets:
+ return True
+ # else if not rebuild, and if the library already exists
+ elif appExists(name, appname):
+ return False
+ # do not change the original value
+ else:
+ return old_value
+ build_tex2lyx = ifBuildApp('tex2lyx', 'tex2lyx', build_tex2lyx)
+ build_client = ifBuildApp('client', 'lyxclient', build_client)
+
+# sync frontend and frontend (maybe build qt4 with frontend=qt3)
+if build_qt3:
+ frontend = 'qt3'
+elif build_qt4:
+ frontend = 'qt4'
+
+
+if build_boost:
+ #
+ # boost libraries
+ #
+ # special builddir
+ env.BuildDir('$BUILDDIR/boost', '$TOP_SRCDIR/boost/libs', duplicate = 0)
+
+ boostenv = env.Copy()
+ #
+ # boost use its own config.h
+ boostenv['CPPPATH'] = ['$TOP_SRCDIR/boost', '$BUILDDIR/boost'] + extra_inc_paths
+ boostenv.AppendUnique(CCFLAGS = ['-DBOOST_USER_CONFIG="<config.h>"'])
+
+ for lib in boost_libs:
+ print 'Processing files in boost/libs/%s/src...' % lib
+ boostlib = boostenv.StaticLibrary(
+ target = '$LOCALLIBPATH/included_boost_%s' % lib,
+ source = ['$BUILDDIR/boost/%s/src/%s' % (lib, x) for x in eval('boost_libs_%s_src_files' % lib)]
+ )
+ Alias('boost', boostlib)
+
+
+if build_intl:
+ #
+ # intl
+ #
+ intlenv = env.Copy()
+
+ print "Processing files in intl..."
+
+ env.BuildDir('$BUILDDIR/intl', '$TOP_SRCDIR/intl', duplicate = 0)
+
+ # we need the original C compiler for these files
+ intlenv['CC'] = C_COMPILER
+ intlenv['CCFLAGS'] = C_CCFLAGS
+ if use_vc:
+ intlenv.Append(CCFLAGS=['/Dinline#', '/D__attribute__(x)#', '/Duintmax_t=UINT_MAX'])
+ # intl does not use global config.h
+ intlenv['CPPPATH'] = ['$BUILDDIR/intl'] + extra_inc_paths
+
+ intlenv.Append(CCFLAGS = [
+ r'-DLOCALEDIR=\"' + env['LOCALEDIR'].replace('\\', '\\\\') + r'\"',
+ r'-DLOCALE_ALIAS_PATH=\"' + env['LOCALEDIR'].replace('\\', '\\\\') + r'\"',
+ r'-DLIBDIR=\"' + env['TOP_SRCDIR'].replace('\\', '\\\\') + r'/lib\"',
+ '-DIN_LIBINTL',
+ '-DENABLE_RELOCATABLE=1',
+ '-DIN_LIBRARY',
+ r'-DINSTALLDIR=\"' + prefix.replace('\\', '\\\\') + r'/lib\"',
+ '-DNO_XMALLOC',
+ '-Dset_relocation_prefix=libintl_set_relocation_prefix',
+ '-Drelocate=libintl_relocate',
+ '-DDEPENDS_ON_LIBICONV=1',
+ '-DHAVE_CONFIG_H'
+ ]
+ )
+
+ intl = intlenv.StaticLibrary(
+ target = '$LOCALLIBPATH/included_intl',
+ LIBS = ['c'],
+ source = ['$BUILDDIR/intl/%s' % x for x in intl_files]
+ )
+ Alias('intl', intl)
-print "Building all targets recursively"
-env.SConscript('$SCONS_DIR/SConscript', duplicate = 0)
+#
+# Now, src code under src/
+#
+env.BuildDir('$BUILDDIR/common', '$TOP_SRCDIR/src', duplicate = 0)
+
+
+if build_support:
+ #
+ # src/support
+ #
+ print "Processing files in src/support..."
+
+ env.substFile('$BUILDDIR/common/support/package.C', '$TOP_SRCDIR/src/support/package.C.in')
+
+ support = env.StaticLibrary(
+ target = '$LOCALLIBPATH/support',
+ source = ['$BUILDDIR/common/support/%s' % x for x in src_support_files]
+ )
+ Alias('support', support)
+
+
+if build_mathed:
+ #
+ # src/mathed
+ #
+ print "Processing files in src/mathed..."
+ #
+ mathed = env.StaticLibrary(
+ target = '$LOCALLIBPATH/mathed',
+ source = ['$BUILDDIR/common/mathed/%s' % x for x in src_mathed_files]
+ )
+ Alias('mathed', mathed)
+
+
+if build_insets:
+ #
+ # src/insets
+ #
+ print "Processing files in src/insets..."
+ #
+ insets = env.StaticLibrary(
+ target = '$LOCALLIBPATH/insets',
+ source = ['$BUILDDIR/common/insets/%s' % x for x in src_insets_files]
+ )
+ Alias('insets', insets)
+
+
+if build_frontends:
+ #
+ # src/frontends
+ #
+ print "Processing files in src/frontends..."
+
+ frontends = env.StaticLibrary(
+ target = '$LOCALLIBPATH/frontends',
+ source = ['$BUILDDIR/common/frontends/%s' % x for x in src_frontends_files]
+ )
+ Alias('frontends', frontends)
+
+
+if build_graphics:
+ #
+ # src/graphics
+ #
+ print "Processing files in src/graphics..."
+
+ graphics = env.StaticLibrary(
+ target = '$LOCALLIBPATH/graphics',
+ source = ['$BUILDDIR/common/graphics/%s' % x for x in src_graphics_files]
+ )
+ Alias('graphics', graphics)
+
+
+if build_controllers:
+ #
+ # src/frontends/controllers
+ #
+ print "Processing files in src/frontends/controllers..."
+
+ controllers = env.StaticLibrary(
+ target = '$LOCALLIBPATH/controllers',
+ source = ['$BUILDDIR/common/frontends/controllers/%s' % x for x in src_frontends_controllers_files]
+ )
+ Alias('controllers', controllers)
+
+
+#
+# src/frontend/qt3/4
+#
+if build_qt3 or build_qt4:
+ env.BuildDir('$BUILDDIR/$frontend', '$TOP_SRCDIR/src/frontend/$frontend', duplicate = 0)
+
+if build_qt3:
+ print "Processing files in src/frontends/qt3..."
+ qt3env = env.Copy()
+ # disable auto scan to speed up non build time
+ qt3env['QT_AUTOSCAN'] = 0
+ qt3env['QT_MOCHPREFIX'] = ''
+ # load qt3 tools
+ qt3env.Tool('qt')
+
+ qt3env.AppendUnique(CPPPATH = [
+ '$BUILDDIR/common',
+ '$BUILDDIR/common/images',
+ '$BUILDDIR/common/frontends',
+ '$BUILDDIR/common/frontends/qt3',
+ '$BUILDDIR/common/frontends/controllers',
+ qt_inc_path]
+ )
+
+ qt3_moc_files = ["$BUILDDIR/common/frontends/qt3/%s" % x for x in src_frontends_qt3_moc_files]
+
+ # manually moc and uic files for better performance
+ qt3_moced_files = [qt3env.Moc(x.replace('.C', '_moc.cpp'), x.replace('.C', '.h')) for x in qt3_moc_files]
+
+ qt3_uiced_files = [qt3env.Uic('$BUILDDIR/common/frontends/qt3/ui/'+x) for x in \
+ src_frontends_qt3_ui_files]
+
+ qt3_uiced_cc_files = []
+ for x in qt3_uiced_files:
+ qt3_uiced_cc_files.extend(x[1:])
+
+ qt3 = qt3env.StaticLibrary(
+ target = '$LOCALLIBPATH/qt3',
+ source = ['$BUILDDIR/common/frontends/qt3/%s' % x for x in src_frontends_qt3_files] \
+ + qt3_uiced_cc_files
+ )
+ Alias('qt3', qt3)
+
+
+if build_qt4:
+ print "Processing files in src/frontends/qt4..."
+
+ qt4env = env.Copy()
+ qt4env['QT_AUTOSCAN'] = 0
+
+ # local qt4 toolset from
+ # http://www.iua.upf.es/~dgarcia/Codders/sconstools.html
+ #
+ # NOTE: I have to patch qt4.py since it does not automatically
+ # process .C file!!! (add to cxx_suffixes )
+ #
+ qt4env.Tool('qt4', [scons_dir])
+ qt4env.EnableQt4Modules(qt_libs, debug = (mode == 'debug'))
+
+ qt4env.AppendUnique(CPPPATH = [
+ '$BUILDDIR/common',
+ '$BUILDDIR/common/images',
+ '$BUILDDIR/common/frontends',
+ '$BUILDDIR/common/frontends/qt4',
+ '$BUILDDIR/common/frontends/controllers',
+ qt_inc_path
+ ]
+ )
+
+ # FIXME: replace by something from pkg_config
+ qt4env.Append(CCFLAGS = [
+ '-DHAVE_CONFIG_H',
+ '-DQT_CLEAN_NAMESPACE',
+ '-DQT_GENUINE_STR',
+ '-DQT_NO_STL',
+ '-DQT_NO_KEYWORDS',
+ ]
+ )
+
+
+ qt4_moc_files = ["$BUILDDIR/common/frontends/qt4/%s" % x for x in src_frontends_qt4_moc_files]
+
+ #
+ # Compile resources
+ #
+ resources = [qt4env.Uic4(x.split('.')[0]) for x in \
+ ["$BUILDDIR/common/frontends/qt4/ui/%s" % x for x in src_frontends_qt4_ui_files]]
+
+ #
+ # moc qt4_moc_files, the moced files are included in the original files
+ #
+ qt4_moced_files = [qt4env.Moc4(x.replace('.C', '_moc.cpp'), x.replace('.C', '.h')) for x in qt4_moc_files]
+
+ qt4 = qt4env.StaticLibrary(
+ target = '$LOCALLIBPATH/qt4',
+ source = ['$BUILDDIR/common/frontends/qt4/%s' % x for x in src_frontends_qt4_files]
+ )
+ Alias('qt4', qt4)
+
+
+if build_client:
+ #
+ # src/client
+ #
+ env.BuildDir('$BUILDDIR/common', '$TOP_SRCDIR/src', duplicate = 0)
+
+ print "Processing files in src/client..."
+
+ if env['HAVE_FCNTL']:
+ client = env.Program(
+ target = '$BUILDDIR/common/client/lyxclient',
+ LIBS = ['support'] + intl_libs + system_libs +
+ socket_libs + boost_libraries,
+ source = ['$BUILDDIR/common/client/%s' % x for x in src_client_files]
+ )
+ Alias('client', env.Command(os.path.join('$BUILDDIR', os.path.split(str(client[0]))[1]),
+ client, [Copy('$TARGET', '$SOURCE')]))
+ else:
+ client = None
+ Alias('client', client)
+else:
+ if env['HAVE_FCNTL']:
+ # define client even if lyxclient is not built with rebuild=no
+ client = [env.subst('$BUILDDIR/common/client/${PROGPREFIX}lyxclient$PROGSUFFIX')]
+ else:
+ client = None
+
+
+if build_tex2lyx:
+ #
+ # tex2lyx
+ #
+ print "Processing files in src/tex2lyx..."
+
+ tex2lyx_env = env.Copy()
+ #
+ tex2lyx_env.Prepend(CPPPATH = ['$BUILDDIR/common/tex2lyx'])
+ tex2lyx_env.AppendUnique(LIBPATH = ['#$LOCALLIBPATH'])
+
+ for file in ['FloatList.C', 'Floating.C', 'counters.C', 'lyxlayout.h', 'lyxlayout.C',
+ 'lyxtextclass.h', 'lyxtextclass.C', 'lyxlex.C', 'lyxlex_pimpl.C']:
+ env.Command('$BUILDDIR/common/tex2lyx/'+file, '$TOP_SRCDIR/src/'+file,
+ [Copy('$TARGET', '$SOURCE')])
+
+ tex2lyx = tex2lyx_env.Program(
+ target = '$BUILDDIR/common/tex2lyx/tex2lyx',
+ LIBS = ['support'] + boost_libraries + system_libs,
+ source = ['$BUILDDIR/common/tex2lyx/%s' % x for x in src_tex2lyx_files]
+ )
+ Alias('tex2lyx', env.Command(os.path.join('$BUILDDIR', os.path.split(str(tex2lyx[0]))[1]),
+ tex2lyx, [Copy('$TARGET', '$SOURCE')]))
+ Alias('tex2lyx', tex2lyx)
+else:
+ # define tex2lyx even if tex2lyx is not built with rebuild=no
+ tex2lyx = [env.subst('$BUILDDIR/common/tex2lyx/${PROGPREFIX}tex2lyx$PROGSUFFIX')]
+
+
+if build_lyxbase:
+ #
+ # src/
+ #
+ print "Processing files in src..."
+
+ env.substFile('$BUILDDIR/common/version.C', '$TOP_SRCDIR/src/version.C.in')
+
+ if env.has_key('USE_ASPELL') and env['USE_ASPELL']:
+ src_post_files.append('aspell.C')
+ elif env.has_key('USE_PSPELL') and env['USE_PSPELL']:
+ src_post_files.append('pspell.C')
+ elif env.has_key('USE_ISPELL') and env['USE_ISPELL']:
+ src_post_files.append('ispell.C')
+
+ # msvc requires at least one source file with main()
+ # so I exclude main.C from lyxbase
+ lyxbase_pre = env.StaticLibrary(
+ target = '$LOCALLIBPATH/lyxbase_pre',
+ source = ['$BUILDDIR/common/%s' % x for x in src_pre_files]
+ )
+ lyxbase_post = env.StaticLibrary(
+ target = '$LOCALLIBPATH/lyxbase_post',
+ source = ["$BUILDDIR/common/%s" % x for x in src_post_files]
+ )
+ Alias('lyxbase', lyxbase_pre)
+ Alias('lyxbase', lyxbase_post)
+
+
+if build_lyx:
+ #
+ # Build lyx with given frontend
+ #
+ lyx = env.Program(
+ target = '$BUILDDIR/$frontend/lyx',
+ source = ['$BUILDDIR/common/main.C'],
+ LIBS = [
+ 'lyxbase_pre',
+ 'mathed',
+ 'insets',
+ 'frontends',
+ frontend,
+ 'controllers',
+ 'graphics',
+ 'support',
+ 'lyxbase_post',
+ ] +
+ boost_libraries +
+ frontend_libs +
+ intl_libs +
+ socket_libs +
+ system_libs
+ )
+ # [/path/to/lyx.ext] => lyx-qt3.ext
+ target_name = os.path.split(str(lyx[0]))[1].replace('lyx', 'lyx-%s' % frontend)
+ Alias('lyx', env.Command(os.path.join('$BUILDDIR', target_name), lyx,
+ [Copy('$TARGET', '$SOURCE')]))
+ Alias('lyx', lyx)
+else:
+ # define lyx even if lyx is not built with rebuild=no
+ lyx = [env.subst('$BUILDDIR/$frontend/${PROGPREFIX}lyx$PROGSUFFIX')]
+
+
+if build_msvs_projects:
+ def build_project(target, full_target = None,
+ src = [], inc = [], res = [], rebuildTargetOnly = True):
+ ''' build mavs project files
+ target: alias (correspond to directory name)
+ full_target: full path/filename of the target
+ src: source files
+ inc: include files
+ res: resource files
+ rebuildTargetOnly: whether or not only rebuild this target
+
+ For non-debug-able targets like static libraries, target (alias) is
+ enough to build the target. For executable targets, msvs need to know
+ the full path to start debug them.
+ '''
+ if rebuildTargetOnly:
+ cmds = 'fast_start=yes rebuild='+target
+ else:
+ cmds = 'fast_start=yes'
+ if full_target is None:
+ build_target = target
+ else:
+ build_target = full_target
+ # project
+ proj = env.MSVSProject(
+ target = target + env['MSVSPROJECTSUFFIX'],
+ # this allows easy access to header files (along with source)
+ srcs = [env.subst(x) for x in src + inc],
+ incs = [env.subst('$TOP_SRCDIR/src/config.h')],
+ localincs = [env.subst(x) for x in inc],
+ resources = [env.subst(x) for x in res],
+ buildtarget = build_target,
+ cmdargs = cmds,
+ variant = 'Debug'
+ )
+ Alias('msvs_projects', proj)
+ #
+ boost_src = []
+ for lib in boost_libs:
+ boost_src += ['$TOP_SRCDIR/boost/libs/%s/src/%s' % (lib, x) for x in eval('boost_libs_%s_src_files' % lib)]
+ build_project('boost', src = boost_src)
+ #
+ build_project('intl', src = ['$TOP_SRCDIR/intl/%s' % x for x in intl_files],
+ inc = ['$TOP_SRCDIR/intl/%s' % x for x in intl_header_files])
+ #
+ build_project('support', src = ['$TOP_SRCDIR/src/support/%s' % x for x in src_support_files],
+ inc = ['$TOP_SRCDIR/src/support/%s' % x for x in src_support_header_files])
+ #
+ build_project('mathed', src = ['$TOP_SRCDIR/src/support/%s' % x for x in src_support_files],
+ inc = ['$TOP_SRCDIR/src/support/%s' % x for x in src_support_header_files])
+ #
+ build_project('insets', src = ['$TOP_SRCDIR/src/insets/%s' % x for x in src_insets_files],
+ inc = ['$TOP_SRCDIR/src/insets/%s' % x for x in src_insets_header_files])
+ #
+ build_project('frontends', src = ['$TOP_SRCDIR/src/frontends/%s' % x for x in src_frontends_files],
+ inc = ['$TOP_SRCDIR/src/frontends/%s' % x for x in src_frontends_header_files])
+ #
+ build_project('graphics', src = ['$TOP_SRCDIR/src/graphics/%s' % x for x in src_graphics_files],
+ inc = ['$TOP_SRCDIR/src/graphics/%s' % x for x in src_graphics_header_files])
+ #
+ build_project('controllers', src = ['$TOP_SRCDIR/src/frontends/controllers/%s' % x for x in src_frontends_controllers_files],
+ inc = ['$TOP_SRCDIR/src/frontends/controllers/%s' % x for x in src_frontends_controllers_header_files])
+ #
+ build_project('qt3', src = ['$TOP_SRCDIR/src/frontends/qt3/%s' % x for x in src_frontends_qt3_files + src_frontends_qt3_moc_files],
+ inc = ['$TOP_SRCDIR/src/frontends/qt3/%s' % x for x in src_frontends_qt3_header_files],
+ res = ['$TOP_SRCDIR/src/frontends/qt3/ui/%s' % x for x in src_frontends_qt3_ui_files])
+ #
+ build_project('qt4', src = ['$TOP_SRCDIR/src/frontends/qt4/%s' % x for x in src_frontends_qt4_files + src_frontends_qt4_moc_files],
+ inc = ['$TOP_SRCDIR/src/frontends/qt4/%s' % x for x in src_frontends_qt4_header_files],
+ res = ['$TOP_SRCDIR/src/frontends/qt4/ui/%s' % x for x in src_frontends_qt4_ui_files])
+ #
+ build_project('client', src = ['$TOP_SRCDIR/src/client/%s' % x for x in src_client_files],
+ inc = ['$TOP_SRCDIR/src/client/%s' % x for x in src_client_header_files],
+ rebuildTargetOnly = False,
+ full_target = File(env.subst('$BUILDDIR/common/client/lyxclient$PROGSUFFIX')).abspath)
+ #
+ build_project('tex2lyx', src = ['$TOP_SRCDIR/src/tex2lyx/%s' % x for x in src_tex2lyx_files],
+ inc = ['$TOP_SRCDIR/src/tex2lyx/%s' % x for x in src_tex2lyx_header_files],
+ rebuildTargetOnly = False,
+ full_target = File(env.subst('$BUILDDIR/common/tex2lyx/tex2lyx$PROGSUFFIX')).abspath)
+ #
+ build_project('lyxbase', src = ['$TOP_SRCDIR/src/%s' % x for x in src_pre_files + src_post_files],
+ inc = ['$TOP_SRCDIR/src/%s' % x for x in src_header_files])
+ #
+ if frontend == 'qt3':
+ build_project('lyx',
+ src = ['$TOP_SRCDIR/src/%s' % x for x in src_pre_files + src_post_files] + \
+ ['$TOP_SRCDIR/src/support/%s' % x for x in src_support_files] + \
+ ['$TOP_SRCDIR/src/mathed/%s' % x for x in src_mathed_files] + \
+ ['$TOP_SRCDIR/src/insets/%s' % x for x in src_insets_files] + \
+ ['$TOP_SRCDIR/src/frontends/%s' % x for x in src_frontends_files] + \
+ ['$TOP_SRCDIR/src/graphics/%s' % x for x in src_graphics_files] + \
+ ['$TOP_SRCDIR/src/frontends/controllers/%s' % x for x in src_frontends_controllers_files] + \
+ ['$TOP_SRCDIR/src/frontends/qt3/%s' % x for x in src_frontends_qt3_files + src_frontends_qt3_moc_files],
+ inc = ['$TOP_SRCDIR/src/%s' % x for x in src_header_files] + \
+ ['$TOP_SRCDIR/src/support/%s' % x for x in src_support_header_files] + \
+ ['$TOP_SRCDIR/src/mathed/%s' % x for x in src_mathed_header_files] + \
+ ['$TOP_SRCDIR/src/insets/%s' % x for x in src_insets_header_files] + \
+ ['$TOP_SRCDIR/src/frontends/%s' % x for x in src_frontends_header_files] + \
+ ['$TOP_SRCDIR/src/graphics/%s' % x for x in src_graphics_header_files] + \
+ ['$TOP_SRCDIR/src/frontends/controllers/%s' % x for x in src_frontends_controllers_header_files] + \
+ ['$TOP_SRCDIR/src/frontends/qt3/%s' % x for x in src_frontends_qt3_header_files],
+ res = ['$TOP_SRCDIR/src/frontends/qt3/ui/%s' % x for x in src_frontends_qt3_ui_files],
+ rebuildTargetOnly = False,
+ full_target = File(env.subst('$BUILDDIR/$frontend/lyx$PROGSUFFIX')).abspath)
+ else:
+ build_project('lyx',
+ src = ['$TOP_SRCDIR/src/%s' % x for x in src_pre_files + src_post_files] + \
+ ['$TOP_SRCDIR/src/support/%s' % x for x in src_support_files] + \
+ ['$TOP_SRCDIR/src/mathed/%s' % x for x in src_mathed_files] + \
+ ['$TOP_SRCDIR/src/insets/%s' % x for x in src_insets_files] + \
+ ['$TOP_SRCDIR/src/frontends/%s' % x for x in src_frontends_files] + \
+ ['$TOP_SRCDIR/src/graphics/%s' % x for x in src_graphics_files] + \
+ ['$TOP_SRCDIR/src/frontends/controllers/%s' % x for x in src_frontends_controllers_files] + \
+ ['$TOP_SRCDIR/src/frontends/qt4/%s' % x for x in src_frontends_qt4_files + src_frontends_qt4_moc_files],
+ inc = ['$TOP_SRCDIR/src/%s' % x for x in src_header_files] + \
+ ['$TOP_SRCDIR/src/support/%s' % x for x in src_support_header_files] + \
+ ['$TOP_SRCDIR/src/mathed/%s' % x for x in src_mathed_header_files] + \
+ ['$TOP_SRCDIR/src/insets/%s' % x for x in src_insets_header_files] + \
+ ['$TOP_SRCDIR/src/frontends/%s' % x for x in src_frontends_header_files] + \
+ ['$TOP_SRCDIR/src/graphics/%s' % x for x in src_graphics_header_files] + \
+ ['$TOP_SRCDIR/src/frontends/controllers/%s' % x for x in src_frontends_controllers_header_files] + \
+ ['$TOP_SRCDIR/src/frontends/qt4/%s' % x for x in src_frontends_qt4_header_files],
+ res = ['$TOP_SRCDIR/src/frontends/qt4/ui/%s' % x for x in src_frontends_qt4_ui_files],
+ rebuildTargetOnly = False,
+ full_target = File(env.subst('$BUILDDIR/$frontend/lyx$PROGSUFFIX')).abspath)
+
+
+if build_po:
+ #
+ # po/
+ #
+ print 'Processing files in po...'
+
+ import glob
+ # handle po files
+ #
+ # files to translate
+ transfiles = glob.glob(os.path.join(env.subst('$TOP_SRCDIR'), 'po', '*.po'))
+ # possibly *only* handle these languages
+ languages = None
+ if env.has_key('languages'):
+ languages = env.make_list(env['lanauges'])
+ # use defulat msgfmt
+ gmo_files = []
+ if not env['MSGFMT']:
+ print 'msgfmt does not exist. Can not process po files'
+ else:
+ # create a builder
+ env['BUILDERS']['Transfiles'] = Builder(action='$MSGFMT $SOURCE -o $TARGET',suffix='.gmo',src_suffix='.po')
+ #
+ for f in transfiles:
+ # get filename
+ fname = os.path.split(f)[1]
+ # country code
+ country = fname.split('.')[0]
+ #
+ if not languages or country in languages:
+ gmo_files.extend(env.Transfiles(f))
+
+
+if 'install' in targets:
+ #
+ # this part is a bit messy right now. Since scons will provide
+ # --DESTDIR option soon, at least the dest_dir handling can be
+ # removed later.
+ #
+ # how to join dest_dir and prefix
+ def joinPaths(path1, path2):
+ ''' join path1 and path2, do not use os.path.join because
+ under window, c:\destdir\d:\program is invalid '''
+ if path1 is None:
+ return os.path.normpath(path2)
+ # separate drive letter
+ (drive, path) = os.path.splitdrive(os.path.normpath(path2))
+ # ignore drive letter, so c:\destdir + c:\program = c:\destdir\program
+ return os.path.join(os.path.normpath(path1), path[1:])
+ #
+ # install to dest_dir/prefix
+ dest_dir = env.get('DESTDIR', None)
+ dest_prefix_dir = joinPaths(dest_dir, env.Dir(prefix).abspath)
+ # create the directory if needed
+ if not os.path.isdir(dest_prefix_dir):
+ try:
+ os.makedirs(dest_prefix_dir)
+ except:
+ pass
+ if not os.path.isdir(dest_prefix_dir):
+ print 'Can not create directory', dest_prefix_dir
+ Exit(3)
+ #
+ if env.has_key('exec_prefix'):
+ bin_dest_dir = joinPaths(dest_dir, Dir(env['exec_prefix']).abspath)
+ else:
+ bin_dest_dir = os.path.join(dest_prefix_dir, 'bin')
+ if add_suffix:
+ share_dest_dir = os.path.join(dest_prefix_dir, share_dir + program_suffix)
+ else:
+ share_dest_dir = os.path.join(dest_prefix_dir, share_dir)
+ man_dest_dir = os.path.join(dest_prefix_dir, man_dir)
+ locale_dest_dir = os.path.join(dest_prefix_dir, locale_dir)
+ #
+ import glob
+ #
+ # install executables (lyxclient may be None)
+ #
+ if add_suffix:
+ version_suffix = program_suffix
+ else:
+ version_suffix = ''
+ #
+ # install lyx, if in release mode, try to strip the binary
+ if env.has_key('STRIP') and env['STRIP'] is not None and mode != 'debug':
+ # create a builder to strip and install
+ env['BUILDERS']['StripInstallAs'] = Builder(action='$STRIP $SOURCE -o $TARGET')
+
+ # install executables
+ for (name, obj) in (('lyx', lyx), ('tex2lyx', tex2lyx), ('client', client)):
+ if obj is None:
+ continue
+ target_name = os.path.split(str(obj[0]))[1].replace(name, '%s%s' % (name, version_suffix))
+ target = os.path.join(bin_dest_dir, target_name)
+ if env['BUILDERS'].has_key('StripInstallAs'):
+ env.StripInstallAs(target, obj)
+ else:
+ env.InstallAs(target, obj)
+ Alias('install', target)
+
+ # share/lyx
+ dirs = []
+ for (dir,files) in [
+ ('.', lib_files),
+ ('clipart', lib_clipart_files),
+ ('examples', lib_examples_files),
+ ('images', lib_images_files),
+ ('images/math', lib_images_math_files),
+ ('bind', lib_bind_files),
+ ('kbd', lib_kbd_files),
+ ('layouts', lib_layouts_files),
+ ('scripts', lib_scripts_files),
+ ('templates', lib_templates_files),
+ ('tex', lib_tex_files),
+ ('ui', lib_ui_files),
+ ('doc', lib_doc_files),
+ ('lyx2lyx', lib_lyx2lyx_files)]:
+ dirs.append(env.Install(os.path.join(share_dest_dir, dir),
+ [env.subst('$TOP_SRCDIR/lib/%s/%s' % (dir, file)) for file in files]))
+ Alias('install', dirs)
+
+ if platform_name == 'cygwin':
+ # cygwin packaging requires a file /usr/share/doc/Cygwin/foot-vendor-suffix.README
+ Cygwin_README = os.path.join(dest_prefix_dir, 'doc', 'Cygwin',
+ '%s%s.README' % (package, package_cygwin_version))
+ env.InstallAs(Cygwin_README,
+ os.path.join(env.subst('$TOP_SRCDIR'), 'README.cygwin'))
+ Alias('install', Cygwin_README)
+ # also a directory /usr/share/doc/lyx for README etc
+ Cygwin_Doc = os.path.join(dest_prefix_dir, 'doc', package)
+ env.Install(Cygwin_Doc, [os.path.join(env.subst('$TOP_SRCDIR'), x) for x in \
+ ['INSTALL', 'README', 'README.Cygwin', 'RELEASE-NOTES', 'COPYING', 'ANNOUNCE']])
+ Alias('install', Cygwin_Doc)
+
+ # lyx1.4.x does not have lyx2lyx_version.py.in
+ if os.path.isfile(env.subst('$TOP_SRCDIR/lib/lyx2lyx/lyx2lyx_version.py.in')):
+ # subst and install this file
+ env.substFile(share_dest_dir + '/lyx2lyx/lyx2lyx_version.py',
+ '$TOP_SRCDIR/lib/lyx2lyx/lyx2lyx_version.py.in')
+ Alias('install', share_dest_dir + '/lyx2lyx/lyx2lyx_version.py')
+ # man
+ env.InstallAs(os.path.join(man_dest_dir, 'lyx' + version_suffix + '.1'),
+ env.subst('$TOP_SRCDIR/lyx.man'))
+ env.InstallAs(os.path.join(man_dest_dir, 'tex2lyx' + version_suffix + '.1'),
+ env.subst('$TOP_SRCDIR/src/tex2lyx/tex2lyx.man'))
+ env.InstallAs(os.path.join(man_dest_dir, 'lyxclient' + version_suffix + '.1'),
+ env.subst('$TOP_SRCDIR/src/client/lyxclient.man'))
+ Alias('install', [os.path.join(man_dest_dir, x + version_suffix + '.1') for
+ x in ['lyx', 'tex2lyx', 'lyxclient']])
+ # locale files?
+ # ru.gmo ==> ru/LC_MESSAGES/lyxSUFFIX.mo
+ for gmo in gmo_files:
+ lan = os.path.split(str(gmo))[1].split('.')[0]
+ dest_file = os.path.join(locale_dest_dir, lan, 'LC_MESSAGES', 'lyx' + program_suffix + '.mo')
+ env.InstallAs(dest_file, gmo)
+ Alias('install', dest_file)
+
+
+Default('lyx')
+Alias('all', ['lyx', 'client', 'tex2lyx'])