dnl Usage LYX_CHECK_VERSION Displays version of LyX being built and
-dnl sets variables "lyx_devel_version" and "lyx_prerelease"
+dnl sets variables "lyx_devel_version" and "lyx_prerelease"
AC_DEFUN(LYX_CHECK_VERSION,[
changequote(, ) dnl
echo "configuring LyX version $VERSION"
fi
changequote([, ]) dnl
AC_SUBST(lyx_devel_version)
-if test $lyx_devel_version = yes ; then
+if test $lyx_devel_version = yes ; then
AC_DEFINE(DEVEL_VERSION, 1, Define if you are building a development version of LyX)
fi])
-
-dnl Define the option to set a LyX version on installed executables and directories
+
+dnl Define the option to set a LyX version on installed executables and directories
dnl
dnl
-AC_DEFUN(LYX_VERSION_SUFFIX,[
+AC_DEFUN(LYX_VERSION_SUFFIX,[
AC_MSG_CHECKING([for install target ... ])
AC_ARG_WITH(version-suffix,
[ --with-version-suffix[=<version>] install lyx files as lyx<version>],
lyx_warning=yes])
-dnl Usage: LYX_LIB_ERROR(file,library) Displays an error message indication
+dnl Usage: LYX_LIB_ERROR(file,library) Displays an error message indication
dnl that 'file' cannot be found because 'lib' may be uncorrectly installed.
AC_DEFUN(LYX_LIB_ERROR,[
LYX_ERROR([Cannot find $1. Please check that the $2 library
dnl Usage: LYX_CHECK_ERRORS Displays a warning message if a LYX_ERROR
-dnl has occured previously.
+dnl has occured previously.
AC_DEFUN(LYX_CHECK_ERRORS,[
if test x$lyx_error = xyes; then
cat <<EOF
-**** The following problems have been detected by configure.
+**** The following problems have been detected by configure.
**** Please check the messages below before running 'make'.
**** (see the section 'Problems' in the INSTALL file)
$lyx_error_txt
if test x$lyx_warning = xyes; then
cat <<EOF
-=== The following minor problems have been detected by configure.
+=== The following minor problems have been detected by configure.
=== Please check the messages below before running 'make'.
=== (see the section 'Problems' in the INSTALL file)
$lyx_warning_txt
EOF
fi
cat <<EOF
-Configuration of LyX was successful.
-Type 'make' to compile the program,
+Configuration of LyX was successful.
+Type 'make' to compile the program,
and then 'make install' to install it.
EOF
fi])
dnl LYX_SEARCH_PROG(VARIABLE-NAME,PROGRAMS-LIST,ACTION-IF-FOUND)
-dnl
+dnl
define(LYX_SEARCH_PROG,[dnl
for ac_prog in $2 ; do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$[2]
if test -z "[$]$1"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f [$ac_dir/$ac_word]; then
- $1="$ac_prog"
- break
+ $1="$ac_prog"
+ break
fi
done
IFS="$ac_save_ifs"
[rm -f conftest.C
cat >conftest.C <<EOF
class foo {
- // we require the mutable keyword
- mutable int bar;
- };
+ // we require the mutable keyword
+ mutable int bar;
+ };
// we require namespace support
namespace baz {
int bar;
return(0);
}
EOF
-$CXX -c $CXXFLAGS $CPPFLAGS conftest.C >&5 || CXX=
+$CXX -c $CXXFLAGS $CPPFLAGS conftest.C >&5 || CXX=
rm -f conftest.C conftest.o conftest.obj || true
])
AC_DEFUN(LYX_PROG_CXX,
[AC_MSG_CHECKING([for a good enough C++ compiler])
-LYX_SEARCH_PROG(CXX, $CCC g++ gcc c++ CC cxx xlC cc++, [LYX_PROG_CXX_WORKS])
+LYX_SEARCH_PROG(CXX, $CXX $CCC g++ gcc c++ CC cxx xlC cc++, [LYX_PROG_CXX_WORKS])
if test -z "$CXX" ; then
AC_ERROR([Unable to find a good enough C++ compiler])
there by the developpers to get attention])
fi
+### We might want to disable debug
+AC_ARG_ENABLE(debug,
+ [ --enable-debug enable debug information],,
+ [ if test $lyx_devel_version = yes -o $lyx_prerelease = yes && test $ac_cv_prog_gxx = yes ; then
+ enable_debug=yes;
+ else
+ enable_debug=no;
+ fi;])
+
### set up optimization
AC_ARG_ENABLE(optimization,
[ --enable-optimization[=value] enable compiler optimisation],,
- enable_optimization=yes;)
+ enable_optimization=yes;)
case $enable_optimization in
yes) lyx_opt=-O;;
no) lyx_opt=;;
# set the debug flags correctly.
if test x$GXX = xyes; then
dnl Useful for global version info
- gxx_version=`${CXX} --version`
+ gxx_version=`${CXX} -dumpversion`
CXX_VERSION="($gxx_version)"
-
+
if test "$ac_test_CXXFLAGS" = set; then
CXXFLAGS="$ac_save_CXXFLAGS"
- else
+ else
case $gxx_version in
- 2.95.1) CXXFLAGS="-g $lyx_opt -fpermissive -fno-rtti -fno-exceptions";;
- 2.95.2) CXXFLAGS="-g $lyx_opt -fno-rtti -fno-exceptions";;
- 2.95.*) CXXFLAGS="-g $lyx_opt -fno-exceptions";;
- 2.96*) CXXFLAGS="-g $lyx_opt -fno-exceptions";;
- 3.0*) CXXFLAGS="-g $lyx_opt";;
- *2.91.*) CXXFLAGS="-g $lyx_opt -fno-rtti -fno-exceptions";;
- *) CXXFLAGS="-g $lyx_opt -fno-rtti -fno-exceptions";;
+ 2.95.1) CXXFLAGS="$lyx_opt -fpermissive";;
+ 2.95.2) CXXFLAGS="$lyx_opt";;
+ 2.95.*) CXXFLAGS="$lyx_opt";;
+ 2.96*) CXXFLAGS="$lyx_opt";;
+ 3.0*) CXXFLAGS="$lyx_opt";;
+ 3.1*) CXXFLAGS="$lyx_opt";;
+ 3.2*) CXXFLAGS="$lyx_opt";;
+ *) CXXFLAGS="$lyx_opt";;
esac
+ if test x$enable_debug = xyes ; then
+ CXXFLAGS="-g $CXXFLAGS"
+ fi
fi
if test x$enable_warnings = xyes ; then
case $gxx_version in
case $gxx_version in
2.95.*) ;;
2.96*) ;;
- 2.97*) ;;
- *2.91*) ;;
- *) ;;
+ *) CXXFLAGS="$CXXFLAGS -Winline";;
esac
fi
fi
],lyx_cv_rtti=yes,lyx_cv_rtti=no,lyx_cv_rtti=no)
])
if test x$lyx_cv_rtti = xyes ; then
- AC_DEFINE(HAVE_RTTI, 1,
+ AC_DEFINE(HAVE_RTTI, 1,
[Define to 1 if your compiler supports runtime type information])
fi])
};],,lyx_cv_explicit=yes,lyx_cv_explicit=no)
])
if test $lyx_cv_explicit = no ; then
- AC_DEFINE(explicit,[ ],
+ AC_DEFINE(explicit,[ ],
[Define to nothing if your compiler does not understand the
'explicit' directive])
fi])
],lyx_cv_broken_stack=no,lyx_cv_broken_stack=yes)
])
if test $lyx_cv_broken_stack = yes ; then
- AC_DEFINE(BROKEN_STL_STACK, 1,
+ AC_DEFINE(BROKEN_STL_STACK, 1,
[Define if you have the STL from libg++ 2.7.x, where stack<> is not defined
correctly])
fi])
using std::count;
int countChar(char * b, char * e, char const c)
{
- return count(b, e, c);
+ return count(b, e, c);
}
],[
char a[] = "hello";
],lyx_cv_modern_streams=yes,lyx_cv_modern_streams=no)
])
if test $lyx_cv_modern_streams = yes ; then
- AC_DEFINE(MODERN_STL_STREAMS, 1,
+ AC_DEFINE(MODERN_STL_STREAMS, 1,
[Define if you have modern standard-compliant STL streams])
fi])
AC_ARG_WITH(included-string,
[ --with-included-string use LyX string class instead of STL string],
[lyx_cv_with_included_string=$withval
- AC_MSG_RESULT([$with_included_string])],
+ AC_MSG_RESULT([$with_included_string])],
[AC_CACHE_CHECK([],lyx_cv_with_included_string,
[AC_TRY_COMPILE([
#include <string>
lyx_cv_std_string_good=yes
],[
lyx_cv_std_string_good=no
-
+
])
])
if test x$lyx_cv_std_string_good = xyes ; then
dnl Usage: LYX_REGEX : checks if the header regex.h is available
dnl if it is not available the automake variable USE_REGEX will be
dnl defined and the regex.h and regex.c that we provide will be used.
-AC_DEFUN(LYX_REGEX,[
- AC_CHECK_HEADERS(regex.h, lyx_regex=no, lyx_regex=yes)
- AM_CONDITIONAL(USE_REGEX, test x$lyx_regex = xyes)
-])
+dnl AC_DEFUN(LYX_REGEX,[
+dnl AC_CHECK_HEADERS(regex.h, lyx_regex=no, lyx_regex=yes)
+dnl AM_CONDITIONAL(USE_REGEX, test x$lyx_regex = xyes)
+dnl ])
dnl NOT USED CURRENTLY*************************************
dnl LYX_CXX_PARTIAL
[AC_TRY_COMPILE(
[
template<class T, class K>
- class k {
+ class k {
public:
};
template<class T> class k<void,T> { };
])
])
if test x$lyx_cv_cxx_partial_specialization = xyes ; then
- AC_DEFINE(HAVE_PARTIAL_SPECIALIZATION, 1,
+ AC_DEFINE(HAVE_PARTIAL_SPECIALIZATION, 1,
[Defined if your compiler supports partial specialization.])
fi
])
#include <cstring>
#include <ctime>],[lyx_cv_cxx_cheaders=yes],[lyx_cv_cxx_cheaders=no])])
if test $lyx_cv_cxx_cheaders = no ; then
- LYX_ADD_INC_DIR(lyx_cppflags,\$(top_srcdir)/src/cheaders)
+ LYX_ADD_INC_DIR(lyx_cppflags,\$(top_srcdir)/src/cheaders)
fi])
dnl Usage: LYX_CXX_GLOBAL_CSTD: checks whether C library functions
dnl Usage LYX_PATH_XPM: Checks for xpm library and header
AC_DEFUN(LYX_PATH_XPM,[
### Check for Xpm library
-AC_CHECK_LIB(Xpm, XpmCreateBufferFromImage,LYX_LIBS="-lXpm $LYX_LIBS",
- [LYX_LIB_ERROR(libXpm,Xpm)], $LYX_LIBS)
-
+AC_CHECK_LIB(Xpm, XpmCreateBufferFromImage,XPM_LIB="-lXpm",
+ [LYX_LIB_ERROR(libXpm,Xpm)], $XPM_LIB)
+AC_SUBST(XPM_LIB)
### Check for Xpm headers
lyx_cv_xpm_h_location="<xpm.h>"
AC_CHECK_HEADER(X11/xpm.h,[
case "$lyx_cv_xpmr" in
changequote(,)
[0-9]) lyxxpmr_alpha=`echo $lyx_cv_xpmr |tr 123456789 abcdefghi`
- lyxxpmv_alpha=" (aka 3.$lyx_cv_xpmv$lyxxpmr_alpha)";;
+ lyxxpmv_alpha=" (aka 3.$lyx_cv_xpmv$lyxxpmr_alpha)";;
changequote([,])
- *) ;;
+ *) ;;
esac
lyx_cv_xpmversion="$lyx_cv_xpmv.$lyx_cv_xpmr$lyxxpmv_alpha"
rm -f conftest*])
XPM_VERSION=${lyx_cv_xpmversion}
- case "$lyx_cv_xpmr" in
+ case "$lyx_cv_xpmr" in
changequote(,)
- [789]|[0-9][0-9]*) ;;
+ [789]|[0-9][0-9]*) ;;
changequote([,])
- *) LYX_WARNING([Version $lyx_cv_xpmversion of the Xpm library is a bit old.
- If you experience strange crashes with LyX, try to upgrade
+ *) LYX_WARNING([Version $lyx_cv_xpmversion of the Xpm library is a bit old.
+ If you experience strange crashes with LyX, try to upgrade
to at least version 4.7 (aka 3.4g).
If you have installed a newer version of the library, check whether you
have an old xpm.h header file in your include path.]);;
fi])
-dnl Usage LYX_PATH_XFORMS: Checks for xforms library and flags
-AC_DEFUN(LYX_PATH_XFORMS,[
-### Check for xforms library
-AC_CHECK_LIB(forms, fl_initialize, LYX_LIBS="-lforms $LYX_LIBS",
- [AC_CHECK_LIB(xforms, fl_initialize, LYX_LIBS="-lxforms $LYX_LIBS",
- [LYX_LIB_ERROR(libforms or libxforms,xforms)], $LYX_LIBS)], $LYX_LIBS)
-
-### Check for xforms headers
-lyx_cv_forms_h_location="<forms.h>"
-AC_CHECK_HEADER(X11/forms.h,[
- ac_cv_header_forms_h=yes
- lyx_cv_forms_h_location="<X11/forms.h>"],[
-AC_CHECK_HEADER(forms.h,[],[
-LYX_LIB_ERROR(forms.h,forms)])])
-AC_DEFINE_UNQUOTED(FORMS_H_LOCATION,$lyx_cv_forms_h_location)
-if test $ac_cv_header_forms_h = yes; then
- AC_CACHE_CHECK([xforms header version],lyx_cv_xfversion,
- [ cat > conftest.$ac_ext <<EOF
-#line __oline__ "configure"
-#include "confdefs.h"
-
-#include FORMS_H_LOCATION
-#if ! defined(FL_INCLUDE_VERSION)
-"%%%"(unknown)"%%%"
-#else
-"%%%"FL_VERSION.FL_REVISION.FL_FIXLEVEL"%%%"
-#endif
-EOF
-lyx_cv_xfversion=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \
- grep '^"%%%"' 2>/dev/null | \
- sed -e 's/^"%%%"\(.*\)"%%%"/\1/' -e 's/ //g'`
-rm -f conftest*])
-XFORMS_VERSION=$lyx_cv_xfversion
-case "$lyx_cv_xfversion" in
- "(unknown)"|0.8[1-7]*)
- LYX_ERROR(dnl
-Version $lyx_cv_xfversion of xforms is not compatible with LyX.
- This version of LyX works best with versions 0.88 (recommended) and later.) ;;
- 0.88*) ;;
- 0.89[01234]) LYX_WARNING(dnl
-LyX should work ok with version $lyx_cv_xfversion of xforms[,] but
-it is an unproven version and might still have some bugs. You should
-probably use version 0.89.6 (or 0.88) instead) ;;
- 0.89*) ;;
- *) LYX_WARNING(dnl
-Version $lyx_cv_xfversion of xforms might not be compatible with LyX[,]
- since it is newer than 0.88. You might have slight problems with it.);;
-esac
-fi])
-
-
dnl Usage: LYX_HPUX Checks for HP-UX and update CXXFLAGS accordingly
AC_DEFUN(LYX_HPUX,
[#It seems that HPUX requires using -fpcc-struct-return with gcc.
dnl Usage: LYX_FUNC_PUTENV_ARGTYPE
dnl Checks whether putenv() takes 'char const *' or 'char *' as
-dnl argument. This is needed because Solaris 7 (wrongly?) uses 'char *',
+dnl argument. This is needed because Solaris 7 (wrongly?) uses 'char *',
dnl while everybody else uses the former...
AC_DEFUN(LYX_FUNC_PUTENV_ARGTYPE,
[AC_MSG_CHECKING([type of argument for putenv()])
[Define to the type of the argument of putenv(). Needed on Solaris 7.])])
-dnl Usage: LYX_WITH_DIR(dir-name,desc,dir-var-name,default-value,
-dnl [default-yes-value])
-dnl Adds a --with-'dir-name' option (described by 'desc') and puts the
+dnl Usage: LYX_WITH_DIR(dir-name,desc,dir-var-name,default-value,
+dnl [default-yes-value])
+dnl Adds a --with-'dir-name' option (described by 'desc') and puts the
dnl resulting directory name in 'dir-var-name'.
AC_DEFUN(LYX_WITH_DIR,[
AC_ARG_WITH($1,[ --with-$1 specify $2])
dnl Usage: LYX_LOOP_DIR(value,action)
-dnl Executes action for values of variable `dir' in `values'. `values' can
+dnl Executes action for values of variable `dir' in `values'. `values' can
dnl use ":" as a separator.
AC_DEFUN(LYX_LOOP_DIR,[
-IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for dir in `eval "echo $1"`; do
if test ! "$dir" = NONE; then
test ! -d "$dir" && AC_ERROR([\"$dir\" is not a directory])
])
-dnl Usage: LYX_ADD_LIB_DIR(var-name,dir) Adds a -L directive to variable
-dnl var-name.
+dnl Usage: LYX_ADD_LIB_DIR(var-name,dir) Adds a -L directive to variable
+dnl var-name.
AC_DEFUN(LYX_ADD_LIB_DIR,[
$1="${$1} -L$2"
if test "`(uname) 2>/dev/null`" = SunOS &&
uname -r | grep '^5' >/dev/null; then
- if test $ac_cv_prog_gxx = yes ; then
- $1="${$1} -Wl[,]-R$2"
+ if test $ac_cv_prog_gxx = yes ; then
+ $1="${$1} -Wl[,]-R$2"
else
$1="${$1} -R$2"
fi
fi])
-dnl Usage: LYX_ADD_INC_DIR(var-name,dir) Adds a -I directive to variable
-dnl var-name.
+dnl Usage: LYX_ADD_INC_DIR(var-name,dir) Adds a -I directive to variable
+dnl var-name.
AC_DEFUN(LYX_ADD_INC_DIR,[$1="${$1} -I$2 "])
-### Check which libsigc++ we're using and make sure any external one works
-### Check for libsigc++ library
-AC_DEFUN(LYX_WITH_SIGC,
-[AC_MSG_CHECKING(whether the included libsigc++ should be used)
-AC_ARG_WITH([included-libsigc],
- [ --without-included-libsigc
- Use the libsigc++ installed on the system],
- [lyx_use_included_libsigc=$withval],
- [lyx_use_included_libsigc=yes])
-AC_MSG_RESULT([$lyx_use_included_libsigc])
-if test x$lyx_use_included_libsigc = xno; then
- ### Check for libsigc++
- ## can't use AC_SUBST right here!
- AM_PATH_SIGC(0.8.7,
- [ INCLUDED_SIGC=
- ],
- [LYX_ERROR(dnl
- [Cannot find libsigc++ library or headers at least as recent as 0.8.7.
- Check your installation. Have you installed the development package?])
- ])
-else
- ### Use the included libsigc++
- ### sigc-config hasn't been created yet so we can't just do the same as above
- ### unless of course someone gets keen and merges the sigc++ configure.in
- ### with this one. We don't really gain much by doing that though except
- ### a considerably smaller dist and more difficult maintenance.
- ### It'd also mean we'd have the equivalent of config/gettext.m4
- lyx_flags="$lyx_flags included-libsigc"
- SIGC_LIBS="\`\${top_builddir}/sigc++/sigc-config --libs-names | sed -e 's/-lsigc//'\`"
- # Libsigc++ always installs into a subdirectory called sigc++. Therefore we
- # have to always use #include <sigc++/signal_system.h> in our code.
- # Remember if you decide to do anything to the sigc++ code to do your mods on
- # the makeLyXsigc.sh script in development/tools using a current cvs checkout
- # of libsigc++. A tarball distribution doesn't have everything in it that we
- # need.
- # We need both these -I entries to build when builddir != srcdir
- if test "x$src_dir" = "x." ; then
- SIGC_CFLAGS="-I\${top_srcdir}"
- else
- SIGC_CFLAGS="-I\${top_builddir} -I\${top_srcdir}"
- fi
- INCLUDED_SIGC="\${top_builddir}/sigc++/libsigc.la"
- ## can't substitute these here like this otherwise all remaining tests fail
- ## instead we SUBST directly into the Makefiles
- ##LIBS="$LIBS \$SIGC_LIBS"
- ##CPPFLAGS="$CPPFLAGS \$SIGC_CFLAGS"
- AC_SUBST(SIGC_LIBS)
- AC_SUBST(SIGC_CFLAGS)
-fi
-AC_SUBST(INCLUDED_SIGC)
-])
-
### Check for a headers existence and location iff it exists
## This is supposed to be a generalised version of LYX_STL_STRING_FWD
## It almost works. I've tried a few variations but they give errors
AC_DEFINE_UNQUOTED(STL_STRING_FWD_H_LOCATION,$lyx_cv_path_stl_string_fwd_h,
[define this to the location of stl_string_fwd.h to be used with #include,
NOTE: Do not set it to <stl_string_fwd.h> as that will find the LyX
- supplied version of the header.
+ supplied version of the header.
e.g. <../include/stl_string_fwd.h> or better yet use an absolute path])])
])
AC_REQUIRE([AC_CANONICAL_SYSTEM])
AC_MSG_CHECKING([config.cache system type])
if { test x"${ac_cv_host_system_type+set}" = x"set" &&
- test x"$ac_cv_host_system_type" != x"$host"; } ||
+ test x"$ac_cv_host_system_type" != x"$host"; } ||
{ test x"${ac_cv_build_system_type+set}" = x"set" &&
- test x"$ac_cv_build_system_type" != x"$build"; } ||
+ test x"$ac_cv_build_system_type" != x"$build"; } ||
{ test x"${ac_cv_target_system_type+set}" = x"set" &&
- test x"$ac_cv_target_system_type" != x"$target"; }; then
- AC_MSG_RESULT([different])
- ifelse($#, 1, [$1],
- [AC_MSG_ERROR(["you must remove config.cache and restart configure"])])
+ test x"$ac_cv_target_system_type" != x"$target"; }; then
+ AC_MSG_RESULT([different])
+ ifelse($#, 1, [$1],
+ [AC_MSG_ERROR(["you must remove config.cache and restart configure"])])
else
- AC_MSG_RESULT([same])
+ AC_MSG_RESULT([same])
fi
ac_cv_host_system_type="$host"
ac_cv_build_system_type="$build"
#include <sys/socket.h>
#endif
extern int select ($ac_cv_func_select_arg1,$ac_cv_func_select_arg234,$ac_cv_func_select_arg234,$ac_cv_func_select_arg234,$ac_cv_func_select_arg5);],,dnl
- [ac_not_found=no ; break 3],ac_not_found=yes)
+ [ac_not_found=no ; break 3],ac_not_found=yes)
done
done
done
])dnl AC_CACHE_VAL
])dnl AC_CACHE_VAL
if test "$ac_not_found" = yes; then
- ac_cv_func_select_arg1=int
- ac_cv_func_select_arg234='int *'
+ ac_cv_func_select_arg1=int
+ ac_cv_func_select_arg234='int *'
ac_cv_func_select_arg5='struct timeval *'
fi
AC_MSG_RESULT([$ac_cv_func_select_arg1,$ac_cv_func_select_arg234,$ac_cv_func_select_arg5])
- AC_DEFINE_UNQUOTED(SELECT_TYPE_ARG1,$ac_cv_func_select_arg1,
- [Define to the type of arg1 for select().])
+ AC_DEFINE_UNQUOTED(SELECT_TYPE_ARG1,$ac_cv_func_select_arg1,
+ [Define to the type of arg1 for select().])
AC_DEFINE_UNQUOTED(SELECT_TYPE_ARG234,($ac_cv_func_select_arg234),
- [Define to the type of args 2, 3 and 4 for select().])
+ [Define to the type of args 2, 3 and 4 for select().])
AC_DEFINE_UNQUOTED(SELECT_TYPE_ARG5,($ac_cv_func_select_arg5),
- [Define to the type of arg5 for select().])
+ [Define to the type of arg5 for select().])
])
### Check which frontend we want to use. The default is XForms
[AC_MSG_CHECKING([what frontend should be used as main GUI])
AC_ARG_WITH(frontend,
[ --with-frontend=THIS Use THIS frontend as main GUI:
- Possible values: xforms, qt2, gnome],
+ Possible values: xforms, qt2, gnome],
[lyx_use_frontend="$withval"], [lyx_use_frontend="xforms"])
AC_MSG_RESULT($lyx_use_frontend)
AC_SUBST(FRONTEND)
AC_CACHE_VAL([lyx_cv_declare_${tr_hdr}_$1],
[AC_EGREP_HEADER($1, $2, [eval "lyx_cv_declare_${tr_hdr}_$1=yes"], [eval "lyx_cv_declare_${tr_hdr}_$1=no"])])
if eval "test \"\${lyx_cv_declare_${tr_hdr}_$1}\" = \"yes\""; then
- AC_DEFINE_UNQUOTED(HAVE_DECL_${tr_func})
- AC_MSG_RESULT(yes)
+ AC_DEFINE_UNQUOTED(HAVE_DECL_${tr_func})
+ AC_MSG_RESULT(yes)
else
- AC_MSG_RESULT(no)
+ AC_MSG_RESULT(no)
fi])
dnl This is the multiple headers version of the LYX_CHECK_DECL macro above.
projects / lyx.git / blobdiff