-# aclocal-include.m4
-#
-# This macro adds the name macrodir to the set of directories
-# that `aclocal' searches for macros.
-
-# serial 1
-
-dnl AM_ACLOCAL_INCLUDE(macrodir)
-AC_DEFUN([AM_ACLOCAL_INCLUDE],
-[
- AM_CONDITIONAL(INSIDE_GNOME_COMMON, test x = y)
-
- test -n "$ACLOCAL_FLAGS" && ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
-
- for k in $1 ; do ACLOCAL="$ACLOCAL -I $k" ; done
-])
-dnl GNOME_COMPILE_WARNINGS
-dnl Turn on many useful compiler warnings
-dnl For now, only works on GCC
-AC_DEFUN([GNOME_COMPILE_WARNINGS],[
- AC_ARG_ENABLE(compile-warnings,
- [ --enable-compile-warnings=[no/minimum/yes] Turn on compiler warnings.],,enable_compile_warnings=minimum)
-
- AC_MSG_CHECKING(what warning flags to pass to the C compiler)
- warnCFLAGS=
- if test "x$GCC" != xyes; then
- enable_compile_warnings=no
- fi
-
- if test "x$enable_compile_warnings" != "xno"; then
- if test "x$GCC" = "xyes"; then
- case " $CFLAGS " in
- *[\ \ ]-Wall[\ \ ]*) ;;
- *) warnCFLAGS="-Wall -Wunused" ;;
- esac
-
- ## -W is not all that useful. And it cannot be controlled
- ## with individual -Wno-xxx flags, unlike -Wall
- if test "x$enable_compile_warnings" = "xyes"; then
- warnCFLAGS="$warnCFLAGS -Wmissing-prototypes -Wmissing-declarations"
- fi
- fi
- fi
- AC_MSG_RESULT($warnCFLAGS)
-
-])
-
-dnl For C++, do basically the same thing.
-
-AC_DEFUN([GNOME_CXX_WARNINGS],[
- AC_ARG_ENABLE(cxx-warnings,
- [ --enable-cxx-warnings=[no/minimum/yes] Turn on compiler warnings.],,enable_cxx_warnings=minimum)
-
- AC_MSG_CHECKING(what warning flags to pass to the C++ compiler)
- warnCXXFLAGS=
- if test "x$GCC" != xyes; then
- enable_compile_warnings=no
- fi
- if test "x$enable_cxx_warnings" != "xno"; then
- if test "x$GCC" = "xyes"; then
- case " $CXXFLAGS " in
- *[\ \ ]-Wall[\ \ ]*) ;;
- *) warnCXXFLAGS="-Wall -Wno-unused" ;;
- esac
-
- ## -W is not all that useful. And it cannot be controlled
- ## with individual -Wno-xxx flags, unlike -Wall
- if test "x$enable_cxx_warnings" = "xyes"; then
- warnCXXFLAGS="$warnCXXFLAGS -Wmissing-prototypes -Wmissing-declarations -Wshadow -Woverloaded-virtual"
- fi
- fi
- fi
- AC_MSG_RESULT($warnCXXFLAGS)
-
-])
-dnl Curses detection: Munged from Midnight Commander's configure.in
-dnl
-dnl What it does:
-dnl =============
-dnl
-dnl - Determine which version of curses is installed on your system
-dnl and set the -I/-L/-l compiler entries and add a few preprocessor
-dnl symbols
-dnl - Do an AC_SUBST on the CURSES_INCLUDEDIR and CURSES_LIBS so that
-dnl @CURSES_INCLUDEDIR@ and @CURSES_LIBS@ will be available in
-dnl Makefile.in's
-dnl - Modify the following configure variables (these are the only
-dnl curses.m4 variables you can access from within configure.in)
-dnl CURSES_INCLUDEDIR - contains -I's and possibly -DRENAMED_CURSES if
-dnl an ncurses.h that's been renamed to curses.h
-dnl is found.
-dnl CURSES_LIBS - sets -L and -l's appropriately
-dnl CFLAGS - if --with-sco, add -D_SVID3
-dnl has_curses - exports result of tests to rest of configure
-dnl
-dnl Usage:
-dnl ======
-dnl 1) Add lines indicated below to acconfig.h
-dnl 2) call AC_CHECK_CURSES after AC_PROG_CC in your configure.in
-dnl 3) Instead of #include <curses.h> you should use the following to
-dnl properly locate ncurses or curses header file
-dnl
-dnl #if defined(USE_NCURSES) && !defined(RENAMED_NCURSES)
-dnl #include <ncurses.h>
-dnl #else
-dnl #include <curses.h>
-dnl #endif
-dnl
-dnl 4) Make sure to add @CURSES_INCLUDEDIR@ to your preprocessor flags
-dnl 5) Make sure to add @CURSES_LIBS@ to your linker flags or LIBS
-dnl
-dnl Notes with automake:
-dnl - call AM_CONDITIONAL(HAS_CURSES, test "$has_curses" = true) from
-dnl configure.in
-dnl - your Makefile.am can look something like this
-dnl -----------------------------------------------
-dnl INCLUDES= blah blah blah $(CURSES_INCLUDEDIR)
-dnl if HAS_CURSES
-dnl CURSES_TARGETS=name_of_curses_prog
-dnl endif
-dnl bin_PROGRAMS = other_programs $(CURSES_TARGETS)
-dnl other_programs_SOURCES = blah blah blah
-dnl name_of_curses_prog_SOURCES = blah blah blah
-dnl other_programs_LDADD = blah
-dnl name_of_curses_prog_LDADD = blah $(CURSES_LIBS)
-dnl -----------------------------------------------
-dnl
-dnl
-dnl The following lines should be added to acconfig.h:
-dnl ==================================================
-dnl
-dnl /*=== Curses version detection defines ===*/
-dnl /* Found some version of curses that we're going to use */
-dnl #undef HAS_CURSES
-dnl
-dnl /* Use SunOS SysV curses? */
-dnl #undef USE_SUNOS_CURSES
-dnl
-dnl /* Use old BSD curses - not used right now */
-dnl #undef USE_BSD_CURSES
-dnl
-dnl /* Use SystemV curses? */
-dnl #undef USE_SYSV_CURSES
-dnl
-dnl /* Use Ncurses? */
-dnl #undef USE_NCURSES
-dnl
-dnl /* If you Curses does not have color define this one */
-dnl #undef NO_COLOR_CURSES
-dnl
-dnl /* Define if you want to turn on SCO-specific code */
-dnl #undef SCO_FLAVOR
-dnl
-dnl /* Set to reflect version of ncurses *
-dnl * 0 = version 1.*
-dnl * 1 = version 1.9.9g
-dnl * 2 = version 4.0/4.1 */
-dnl #undef NCURSES_970530
-dnl
-dnl /*=== End new stuff for acconfig.h ===*/
-dnl
-
-
-AC_DEFUN(AC_CHECK_CURSES,[
- search_ncurses=true
- screen_manager=""
- has_curses=false
-
- CFLAGS=${CFLAGS--O}
-
- AC_SUBST(CURSES_LIBS)
- AC_SUBST(CURSES_INCLUDEDIR)
-
- AC_ARG_WITH(sco,
- [ --with-sco Use this to turn on SCO-specific code],[
- if test x$withval = xyes; then
- AC_DEFINE(SCO_FLAVOR, 1, [dummy])
- CFLAGS="$CFLAGS -D_SVID3"
- fi
- ])
-
- AC_ARG_WITH(sunos-curses,
- [ --with-sunos-curses Used to force SunOS 4.x curses],[
- if test x$withval = xyes; then
- AC_USE_SUNOS_CURSES
- fi
- ])
-
- AC_ARG_WITH(osf1-curses,
- [ --with-osf1-curses Used to force OSF/1 curses],[
- if test x$withval = xyes; then
- AC_USE_OSF1_CURSES
- fi
- ])
-
- AC_ARG_WITH(vcurses,
- [ --with-vcurses[=incdir] Used to force SysV curses],
- if test x$withval != xyes; then
- CURSES_INCLUDEDIR="-I$withval"
- fi
- AC_USE_SYSV_CURSES
- )
-
- AC_ARG_WITH(ncurses,
- [ --with-ncurses[=dir] Compile with ncurses/locate base dir],
- if test x$withval = xno ; then
- search_ncurses=false
- elif test x$withval != xyes ; then
- CURSES_LIBS="$LIBS -L$withval/lib -lncurses"
- CURSES_INCLUDEDIR="-I$withval/include"
- search_ncurses=false
- screen_manager="ncurses"
- AC_DEFINE(USE_NCURSES, 1, [dummy])
- AC_DEFINE(HAS_CURSES, 1, [dummy])
- has_curses=true
- fi
- )
-
- if $search_ncurses
- then
- AC_SEARCH_NCURSES()
- fi
-
-
-])
-
-
-AC_DEFUN(AC_USE_SUNOS_CURSES, [
- search_ncurses=false
- screen_manager="SunOS 4.x /usr/5include curses"
- AC_MSG_RESULT(Using SunOS 4.x /usr/5include curses)
- AC_DEFINE(USE_SUNOS_CURSES, 1, [dummy])
- AC_DEFINE(HAS_CURSES, 1, [dummy])
- has_curses=true
- AC_DEFINE(NO_COLOR_CURSES, 1, [dummy])
- AC_DEFINE(USE_SYSV_CURSES, 1, [dummy])
- CURSES_INCLUDEDIR="-I/usr/5include"
- CURSES_LIBS="/usr/5lib/libcurses.a /usr/5lib/libtermcap.a"
- AC_MSG_RESULT(Please note that some screen refreshs may fail)
-])
-
-AC_DEFUN(AC_USE_OSF1_CURSES, [
- AC_MSG_RESULT(Using OSF1 curses)
- search_ncurses=false
- screen_manager="OSF1 curses"
- AC_DEFINE(HAS_CURSES, 1, [dummy])
- has_curses=true
- AC_DEFINE(NO_COLOR_CURSES, 1 [dummy])
- AC_DEFINE(USE_SYSV_CURSES, 1, [dummy])
- CURSES_LIBS="-lcurses"
-])
-
-AC_DEFUN(AC_USE_SYSV_CURSES, [
- AC_MSG_RESULT(Using SysV curses)
- AC_DEFINE(HAS_CURSES, 1, [dummy])
- has_curses=true
- AC_DEFINE(USE_SYSV_CURSES, 1, [dummy])
- search_ncurses=false
- screen_manager="SysV/curses"
- CURSES_LIBS="-lcurses"
-])
-
-dnl AC_ARG_WITH(bsd-curses,
-dnl [--with-bsd-curses Used to compile with bsd curses, not very fancy],
-dnl search_ncurses=false
-dnl screen_manager="Ultrix/cursesX"
-dnl if test $system = ULTRIX
-dnl then
-dnl THIS_CURSES=cursesX
-dnl else
-dnl THIS_CURSES=curses
-dnl fi
-dnl
-dnl CURSES_LIBS="-l$THIS_CURSES -ltermcap"
-dnl AC_DEFINE(HAS_CURSES, 1, [dummy])
-dnl has_curses=true
-dnl AC_DEFINE(USE_BSD_CURSES, 1, [dummy])
-dnl AC_MSG_RESULT(Please note that some screen refreshs may fail)
-dnl AC_MSG_WARN(Use of the bsdcurses extension has some)
-dnl AC_MSG_WARN(display/input problems.)
-dnl AC_MSG_WARN(Reconsider using xcurses)
-dnl)
-
-
-dnl
-dnl Parameters: directory filename cureses_LIBS curses_INCLUDEDIR nicename
-dnl
-AC_DEFUN(AC_NCURSES, [
- if $search_ncurses
- then
- if test -f $1/$2
- then
- AC_MSG_RESULT(Found ncurses on $1/$2)
- CURSES_LIBS="$3"
- CURSES_INCLUDEDIR="$4"
- search_ncurses=false
- screen_manager=$5
- AC_DEFINE(HAS_CURSES, 1, [dummy])
- has_curses=true
- AC_DEFINE(USE_NCURSES, 1, [dummy])
- fi
- fi
-])
-
-AC_DEFUN(AC_SEARCH_NCURSES, [
- AC_MSG_NOTICE("checking location of ncurses.h file")
-
- AC_NCURSES(/usr/include, ncurses.h, -lncurses,, "ncurses on /usr/include")
- AC_NCURSES(/usr/include/ncurses, ncurses.h, -lncurses, -I/usr/include/ncurses, "ncurses on /usr/include/ncurses")
- AC_NCURSES(/usr/local/include, ncurses.h, -L/usr/local/lib -lncurses, -I/usr/local/include, "ncurses on /usr/local")
- AC_NCURSES(/usr/local/include/ncurses, ncurses.h, -L/usr/local/lib -L/usr/local/lib/ncurses -lncurses, -I/usr/local/include/ncurses, "ncurses on /usr/local/include/ncurses")
-
- AC_NCURSES(/usr/local/include/ncurses, curses.h, -L/usr/local/lib -lncurses, -I/usr/local/include/ncurses -DRENAMED_NCURSES, "renamed ncurses on /usr/local/.../ncurses")
-
- AC_NCURSES(/usr/include/ncurses, curses.h, -lncurses, -I/usr/include/ncurses -DRENAMED_NCURSES, "renamed ncurses on /usr/include/ncurses")
-
- dnl
- dnl We couldn't find ncurses, try SysV curses
- dnl
- if $search_ncurses
- then
- AC_EGREP_HEADER(init_color, /usr/include/curses.h,
- AC_USE_SYSV_CURSES)
- AC_EGREP_CPP(USE_NCURSES,[
-#include <curses.h>
-#ifdef __NCURSES_H
-#undef USE_NCURSES
-USE_NCURSES
-#endif
-],[
- CURSES_INCLUDEDIR="$CURSES_INCLUDEDIR -DRENAMED_NCURSES"
- AC_DEFINE(HAS_CURSES, 1, [dummy])
- has_curses=true
- AC_DEFINE(USE_NCURSES, 1, [dummy])
- search_ncurses=false
- screen_manager="ncurses installed as curses"
-])
- fi
-
- dnl
- dnl Try SunOS 4.x /usr/5{lib,include} ncurses
- dnl The flags USE_SUNOS_CURSES, USE_BSD_CURSES and BUGGY_CURSES
- dnl should be replaced by a more fine grained selection routine
- dnl
- if $search_ncurses
- then
- if test -f /usr/5include/curses.h
- then
- AC_USE_SUNOS_CURSES
- fi
- else
- # check for ncurses version, to properly ifdef mouse-fix
- AC_MSG_CHECKING(for ncurses version)
- ncurses_version=unknown
-cat > conftest.$ac_ext <<EOF
-[#]line __oline__ "configure"
-#include "confdefs.h"
-#ifdef RENAMED_NCURSES
-#include <curses.h>
-#else
-#include <ncurses.h>
-#endif
-#undef VERSION
-VERSION:NCURSES_VERSION
-EOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&AC_FD_CC |
- egrep "VERSION:" >conftest.out 2>&1; then
-changequote(,)dnl
- ncurses_version=`cat conftest.out|sed -e 's/^[^"]*"//' -e 's/".*//'`
-changequote([,])dnl
- fi
- rm -rf conftest*
- AC_MSG_RESULT($ncurses_version)
- case "$ncurses_version" in
-changequote(,)dnl
- 4.[01])
-changequote([,])dnl
- AC_DEFINE(NCURSES_970530, 2, [dummy])
- ;;
- 1.9.9g)
- AC_DEFINE(NCURSES_970530, 1, [dummy])
- ;;
- 1*)
- AC_DEFINE(NCURSES_970530, 0, [dummy])
- ;;
- esac
- fi
-])
-
-
-
-
-
-# Configure paths for Bonobo
-# Miguel de Icaza, 99-04-12
-# Stolen from Chris Lahey 99-2-5
-# stolen from Manish Singh again
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_BONOBO ([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for Bonobo, and define BONOBO_CFLAGS and BONOBO_LIBS
-dnl
-AC_DEFUN([AM_PATH_BONOBO],
-[
-dnl
-dnl Get the cflags and libraries from the gnome-config script
-dnl
-AC_ARG_WITH(bonobo-prefix,[ --with-bonobo-prefix=PFX Prefix where Bonobo is installed (optional)],
- bonobo_prefix="$withval", bonobo_prefix="")
-AC_ARG_WITH(bonobo-exec-prefix,[ --with-bonobo-exec-prefix=PFX Exec prefix where Bonobo is installed (optional)],
- bonobo_exec_prefix="$withval", bonobo_exec_prefix="")
-AC_ARG_ENABLE(bonobotest, [ --disable-bonobotest Do not try to compile and run a test Bonobo program],
- , enable_bonobotest=yes)
-
- if test x$bonobo_exec_prefix != x ; then
- bonobo_args="$bonobo_args --exec-prefix=$bonobo_exec_prefix"
- if test x${GNOME_CONFIG+set} != xset ; then
- GNOME_CONFIG=$bonobo_exec_prefix/bin/gnome-config
- fi
- fi
- if test x$bonobo_prefix != x ; then
- bonobo_args="$bonobo_args --prefix=$bonobo_prefix"
- if test x${GNOME_CONFIG+set} != xset ; then
- GNOME_CONFIG=$bonobo_prefix/bin/gnome-config
- fi
- fi
-
- AC_PATH_PROG(GNOME_CONFIG, gnome-config, no)
- min_bonobo_version=ifelse([$1], ,0.1.0,$1)
- AC_MSG_CHECKING(for BONOBO - version >= $min_bonobo_version)
- no_bonobo=""
- if test "$GNOME_CONFIG" = "no" ; then
- no_bonobo=yes
- else
- BONOBO_CFLAGS=`$GNOME_CONFIG $bonoboconf_args --cflags bonobo`
- BONOBO_LIBS=`$GNOME_CONFIG $bonoboconf_args --libs bonobo`
-
- bonobo_major_version=`$GNOME_CONFIG $bonobo_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- bonobo_minor_version=`$GNOME_CONFIG $bonobo_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- bonobo_micro_version=`$GNOME_CONFIG $bonobo_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_bonobotest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $BONOBO_CFLAGS"
- LIBS="$LIBS $BONOBO_LIBS"
-dnl
-dnl Now check if the installed BONOBO is sufficiently new. (Also sanity
-dnl checks the results of gnome-config to some extent
-dnl
- rm -f conf.bonobotest
- AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bonobo.h>
-
-static char*
-my_strdup (char *str)
-{
- char *new_str;
-
- if (str)
- {
- new_str = malloc ((strlen (str) + 1) * sizeof(char));
- strcpy (new_str, str);
- }
- else
- new_str = NULL;
-
- return new_str;
-}
-
-int main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.bonobotest");
- bonobo_object_get_type ();
- return 0;
-}
-
-],, no_bonobo=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_bonobo" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$GNOME_CONFIG" = "no" ; then
- echo "*** The gnome-config script installed by GNOME-LIBS could not be found"
- echo "*** If BONOBO was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GNOME_CONFIG environment variable to the"
- echo "*** full path to gnome-config."
- else
- if test -f conf.bonobotest ; then
- :
- else
- echo "*** Could not run BONOBO test program, checking why..."
- CFLAGS="$CFLAGS $BONOBO_CFLAGS"
- LIBS="$LIBS $BONOBO_LIBS"
- AC_TRY_LINK([
-#include <stdio.h>
-#include <bonobo/gnome-object.h>
-], [ return 0; ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding BONOBO or finding the wrong"
- echo "*** version of BONOBO. If it is not finding BONOBO, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means BONOBO was incorrectly installed"
- echo "*** or that you have moved BONOBO since it was installed. In the latter case, you"
- echo "*** may want to edit the gnome-config script: $GNOME_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- BONOBO_CFLAGS=""
- BONOBO_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(BONOBO_CFLAGS)
- AC_SUBST(BONOBO_LIBS)
- rm -f conf.bonobotest
-])
-
-AC_DEFUN([BONOBO_CHECK], [
- AM_PATH_BONOBO(0.1.0,,[AC_MSG_ERROR(BONOBO not found)])
-])
-
-# gnome-common.m4
-#
-# This only for packages that are not in the GNOME CVS tree.
-
-dnl GNOME_COMMON_INIT
-
-AC_DEFUN([GNOME_COMMON_INIT],
-[
- GNOME_ACLOCAL_DIR=`$ACLOCAL --print-ac-dir`/gnome
- AC_SUBST(GNOME_ACLOCAL_DIR)
-
- ACLOCAL="$ACLOCAL -I $GNOME_ACLOCAL_DIR"
-])
-
-dnl
-dnl GNOME_FILEUTILS_CHECKS
-dnl
-dnl checks that are needed for the diskusage applet.
-dnl
-
-AC_DEFUN([GNOME_FILEUTILS_CHECKS],
-[
-AC_CHECK_HEADERS(fcntl.h sys/param.h sys/statfs.h sys/fstyp.h \
-mnttab.h mntent.h sys/statvfs.h sys/vfs.h sys/mount.h \
-sys/filsys.h sys/fs_types.h sys/fs/s5param.h)
-
-AC_CHECK_FUNCS(bcopy endgrent endpwent fchdir ftime ftruncate \
-getcwd getmntinfo gettimeofday isascii lchown \
-listmntent memcpy mkfifo strchr strerror strrchr vprintf)
-
-dnl Set some defaults when cross-compiling
-
-if test x$cross_compiling = xyes ; then
- case "$host_os" in
- linux*)
- fu_cv_sys_mounted_getmntent1=yes
- fu_cv_sys_stat_statfs2_bsize=yes
- ;;
- sunos*)
- fu_cv_sys_stat_statfs4=yes
- ;;
- freebsd*)
- fu_cv_sys_stat_statfs2_bsize=yes
- ;;
- osf*)
- fu_cv_sys_stat_statfs3_osf1=yes
- ;;
- esac
-fi
-
-# Determine how to get the list of mounted filesystems.
-list_mounted_fs=
-
-# If the getmntent function is available but not in the standard library,
-# make sure LIBS contains -lsun (on Irix4) or -lseq (on PTX).
-AC_FUNC_GETMNTENT
-
-# This test must precede the ones for getmntent because Unicos-9 is
-# reported to have the getmntent function, but its support is incompatible
-# with other getmntent implementations.
-
-# NOTE: Normally, I wouldn't use a check for system type as I've done for
-# `CRAY' below since that goes against the whole autoconf philosophy. But
-# I think there is too great a chance that some non-Cray system has a
-# function named listmntent to risk the false positive.
-
-if test -z "$list_mounted_fs"; then
-# Cray UNICOS 9
-AC_MSG_CHECKING([for listmntent of Cray/Unicos-9])
-AC_CACHE_VAL(fu_cv_sys_mounted_cray_listmntent,
-[fu_cv_sys_mounted_cray_listmntent=no
-AC_EGREP_CPP(yes,
-[#ifdef _CRAY
-yes
-#endif
-], [test $ac_cv_func_listmntent = yes \
-&& fu_cv_sys_mounted_cray_listmntent=yes]
-)
-]
-)
-AC_MSG_RESULT($fu_cv_sys_mounted_cray_listmntent)
-if test $fu_cv_sys_mounted_cray_listmntent = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_LISTMNTENT, 1, [dummy])
-fi
-fi
-
-if test $ac_cv_func_getmntent = yes; then
-
-# This system has the getmntent function.
-# Determine whether it's the one-argument variant or the two-argument one.
-
-if test -z "$list_mounted_fs"; then
-# 4.3BSD, SunOS, HP-UX, Dynix, Irix
-AC_MSG_CHECKING([for one-argument getmntent function])
-AC_CACHE_VAL(fu_cv_sys_mounted_getmntent1,
-[test $ac_cv_header_mntent_h = yes \
-&& fu_cv_sys_mounted_getmntent1=yes \
-|| fu_cv_sys_mounted_getmntent1=no])
-AC_MSG_RESULT($fu_cv_sys_mounted_getmntent1)
-if test $fu_cv_sys_mounted_getmntent1 = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_GETMNTENT1, 1, [dummy])
-fi
-fi
-
-if test -z "$list_mounted_fs"; then
-# SVR4
-AC_MSG_CHECKING([for two-argument getmntent function])
-AC_CACHE_VAL(fu_cv_sys_mounted_getmntent2,
-[AC_EGREP_HEADER(getmntent, sys/mnttab.h,
-fu_cv_sys_mounted_getmntent2=yes,
-fu_cv_sys_mounted_getmntent2=no)])
-AC_MSG_RESULT($fu_cv_sys_mounted_getmntent2)
-if test $fu_cv_sys_mounted_getmntent2 = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_GETMNTENT2, 1, [dummy])
-fi
-fi
-
-if test -z "$list_mounted_fs"; then
-AC_MSG_ERROR([could not determine how to read list of mounted filesystems])
-fi
-
-fi
-
-if test -z "$list_mounted_fs"; then
-# DEC Alpha running OSF/1.
-AC_MSG_CHECKING([for getfsstat function])
-AC_CACHE_VAL(fu_cv_sys_mounted_getsstat,
-[AC_TRY_LINK([
-#include <sys/types.h>
-#include <sys/mount.h>
-#include <sys/fs_types.h>],
-[struct statfs *stats;
-int numsys = getfsstat ((struct statfs *)0, 0L, MNT_WAIT); ],
-fu_cv_sys_mounted_getsstat=yes,
-fu_cv_sys_mounted_getsstat=no)])
-AC_MSG_RESULT($fu_cv_sys_mounted_getsstat)
-if test $fu_cv_sys_mounted_getsstat = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_GETFSSTAT, 1, [dummy])
-fi
-fi
-
-if test -z "$list_mounted_fs"; then
-# AIX.
-AC_MSG_CHECKING([for mntctl function and struct vmount])
-AC_CACHE_VAL(fu_cv_sys_mounted_vmount,
-[AC_TRY_CPP([#include <fshelp.h>],
-fu_cv_sys_mounted_vmount=yes,
-fu_cv_sys_mounted_vmount=no)])
-AC_MSG_RESULT($fu_cv_sys_mounted_vmount)
-if test $fu_cv_sys_mounted_vmount = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_VMOUNT, 1, [dummy])
-fi
-fi
-
-if test -z "$list_mounted_fs"; then
-# SVR3
-AC_MSG_CHECKING([for FIXME existence of three headers])
-AC_CACHE_VAL(fu_cv_sys_mounted_fread_fstyp,
-[AC_TRY_CPP([
-#include <sys/statfs.h>
-#include <sys/fstyp.h>
-#include <mnttab.h>],
-fu_cv_sys_mounted_fread_fstyp=yes,
-fu_cv_sys_mounted_fread_fstyp=no)])
-AC_MSG_RESULT($fu_cv_sys_mounted_fread_fstyp)
-if test $fu_cv_sys_mounted_fread_fstyp = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_FREAD_FSTYP, 1, [dummy])
-fi
-fi
-
-if test -z "$list_mounted_fs"; then
-# 4.4BSD and DEC OSF/1.
-AC_MSG_CHECKING([for getmntinfo function])
-AC_CACHE_VAL(fu_cv_sys_mounted_getmntinfo,
-[
-ok=
-if test $ac_cv_func_getmntinfo = yes; then
-AC_EGREP_HEADER(f_type;, sys/mount.h,
-ok=yes)
-fi
-test -n "$ok" \
-&& fu_cv_sys_mounted_getmntinfo=yes \
-|| fu_cv_sys_mounted_getmntinfo=no
-])
-AC_MSG_RESULT($fu_cv_sys_mounted_getmntinfo)
-if test $fu_cv_sys_mounted_getmntinfo = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_GETMNTINFO, 1, [dummy])
-fi
-fi
-
-# FIXME: add a test for netbsd-1.1 here
-
-if test -z "$list_mounted_fs"; then
-# Ultrix
-AC_MSG_CHECKING([for getmnt function])
-AC_CACHE_VAL(fu_cv_sys_mounted_getmnt,
-[AC_TRY_CPP([
-#include <sys/fs_types.h>
-#include <sys/mount.h>],
-fu_cv_sys_mounted_getmnt=yes,
-fu_cv_sys_mounted_getmnt=no)])
-AC_MSG_RESULT($fu_cv_sys_mounted_getmnt)
-if test $fu_cv_sys_mounted_getmnt = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_GETMNT, 1, [dummy])
-fi
-fi
-
-if test -z "$list_mounted_fs"; then
-# SVR2
-AC_MSG_CHECKING([whether it is possible to resort to fread on /etc/mnttab])
-AC_CACHE_VAL(fu_cv_sys_mounted_fread,
-[AC_TRY_CPP([#include <mnttab.h>],
-fu_cv_sys_mounted_fread=yes,
-fu_cv_sys_mounted_fread=no)])
-AC_MSG_RESULT($fu_cv_sys_mounted_fread)
-if test $fu_cv_sys_mounted_fread = yes; then
-list_mounted_fs=found
-AC_DEFINE(MOUNTED_FREAD, 1, [dummy])
-fi
-fi
-
-if test -z "$list_mounted_fs"; then
-AC_MSG_ERROR([could not determine how to read list of mounted filesystems])
-# FIXME -- no need to abort building the whole package
-# Can't build mountlist.c or anything that needs its functions
-fi
-
-AC_MSG_NOTICE(checking how to get filesystem space usage)
-space=no
-
-# Perform only the link test since it seems there are no variants of the
-# statvfs function. This check is more than just AC_CHECK_FUNCS(statvfs)
-# because that got a false positive on SCO OSR5. Adding the declaration
-# of a `struct statvfs' causes this test to fail (as it should) on such
-# systems. That system is reported to work fine with STAT_STATFS4 which
-# is what it gets when this test fails.
-if test $space = no; then
-# SVR4
-AC_CACHE_CHECK([statvfs function (SVR4)], fu_cv_sys_stat_statvfs,
-[AC_TRY_LINK([#include <sys/types.h>
-#include <sys/statvfs.h>],
-[struct statvfs fsd; statvfs (0, &fsd);],
-fu_cv_sys_stat_statvfs=yes,
-fu_cv_sys_stat_statvfs=no)])
-if test $fu_cv_sys_stat_statvfs = yes; then
-space=yes
-AC_DEFINE(STAT_STATVFS, 1, [dummy])
-fi
-fi
-
-if test $space = no; then
-# DEC Alpha running OSF/1
-AC_MSG_CHECKING([for 3-argument statfs function (DEC OSF/1)])
-AC_CACHE_VAL(fu_cv_sys_stat_statfs3_osf1,
-[AC_TRY_RUN([
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/mount.h>
-main ()
-{
-struct statfs fsd;
-fsd.f_fsize = 0;
-exit (statfs (".", &fsd, sizeof (struct statfs)));
-}],
-fu_cv_sys_stat_statfs3_osf1=yes,
-fu_cv_sys_stat_statfs3_osf1=no,
-fu_cv_sys_stat_statfs3_osf1=no)])
-AC_MSG_RESULT($fu_cv_sys_stat_statfs3_osf1)
-if test $fu_cv_sys_stat_statfs3_osf1 = yes; then
-space=yes
-AC_DEFINE(STAT_STATFS3_OSF1, 1, [dummy])
-fi
-fi
-
-if test $space = no; then
-# AIX
-AC_MSG_CHECKING([for two-argument statfs with statfs.bsize dnl
-member (AIX, 4.3BSD)])
-AC_CACHE_VAL(fu_cv_sys_stat_statfs2_bsize,
-[AC_TRY_RUN([
-#ifdef HAVE_SYS_PARAM_H
-#include <sys/param.h>
-#endif
-#ifdef HAVE_SYS_MOUNT_H
-#include <sys/mount.h>
-#endif
-#ifdef HAVE_SYS_VFS_H
-#include <sys/vfs.h>
-#endif
-main ()
-{
-struct statfs fsd;
-fsd.f_bsize = 0;
-exit (statfs (".", &fsd));
-}],
-fu_cv_sys_stat_statfs2_bsize=yes,
-fu_cv_sys_stat_statfs2_bsize=no,
-fu_cv_sys_stat_statfs2_bsize=no)])
-AC_MSG_RESULT($fu_cv_sys_stat_statfs2_bsize)
-if test $fu_cv_sys_stat_statfs2_bsize = yes; then
-space=yes
-AC_DEFINE(STAT_STATFS2_BSIZE, 1, [dummy])
-fi
-fi
-
-if test $space = no; then
-# SVR3
-AC_MSG_CHECKING([for four-argument statfs (AIX-3.2.5, SVR3)])
-AC_CACHE_VAL(fu_cv_sys_stat_statfs4,
-[AC_TRY_RUN([#include <sys/types.h>
-#include <sys/statfs.h>
-main ()
-{
-struct statfs fsd;
-exit (statfs (".", &fsd, sizeof fsd, 0));
-}],
-fu_cv_sys_stat_statfs4=yes,
-fu_cv_sys_stat_statfs4=no,
-fu_cv_sys_stat_statfs4=no)])
-AC_MSG_RESULT($fu_cv_sys_stat_statfs4)
-if test $fu_cv_sys_stat_statfs4 = yes; then
-space=yes
-AC_DEFINE(STAT_STATFS4, 1, [dummy])
-fi
-fi
-
-if test $space = no; then
-# 4.4BSD and NetBSD
-AC_MSG_CHECKING([for two-argument statfs with statfs.fsize dnl
-member (4.4BSD and NetBSD)])
-AC_CACHE_VAL(fu_cv_sys_stat_statfs2_fsize,
-[AC_TRY_RUN([#include <sys/types.h>
-#ifdef HAVE_SYS_PARAM_H
-#include <sys/param.h>
-#endif
-#ifdef HAVE_SYS_MOUNT_H
-#include <sys/mount.h>
-#endif
-main ()
-{
-struct statfs fsd;
-fsd.f_fsize = 0;
-exit (statfs (".", &fsd));
-}],
-fu_cv_sys_stat_statfs2_fsize=yes,
-fu_cv_sys_stat_statfs2_fsize=no,
-fu_cv_sys_stat_statfs2_fsize=no)])
-AC_MSG_RESULT($fu_cv_sys_stat_statfs2_fsize)
-if test $fu_cv_sys_stat_statfs2_fsize = yes; then
-space=yes
-AC_DEFINE(STAT_STATFS2_FSIZE, 1, [dummy])
-fi
-fi
-
-if test $space = no; then
-# Ultrix
-AC_MSG_CHECKING([for two-argument statfs with struct fs_data (Ultrix)])
-AC_CACHE_VAL(fu_cv_sys_stat_fs_data,
-[AC_TRY_RUN([#include <sys/types.h>
-#ifdef HAVE_SYS_PARAM_H
-#include <sys/param.h>
-#endif
-#ifdef HAVE_SYS_MOUNT_H
-#include <sys/mount.h>
-#endif
-#ifdef HAVE_SYS_FS_TYPES_H
-#include <sys/fs_types.h>
-#endif
-main ()
-{
-struct fs_data fsd;
-/* Ultrix's statfs returns 1 for success,
-0 for not mounted, -1 for failure. */
-exit (statfs (".", &fsd) != 1);
-}],
-fu_cv_sys_stat_fs_data=yes,
-fu_cv_sys_stat_fs_data=no,
-fu_cv_sys_stat_fs_data=no)])
-AC_MSG_RESULT($fu_cv_sys_stat_fs_data)
-if test $fu_cv_sys_stat_fs_data = yes; then
-space=yes
-AC_DEFINE(STAT_STATFS2_FS_DATA, 1, [dummy])
-fi
-fi
-
-if test $space = no; then
-# SVR2
-AC_TRY_CPP([#include <sys/filsys.h>],
-AC_DEFINE(STAT_READ_FILSYS, 1, [dummy]) space=yes)
-fi
-
-if test -n "$list_mounted_fs" && test $space != no; then
-DF_PROG="df"
-# LIBOBJS="$LIBOBJS fsusage.o"
-# LIBOBJS="$LIBOBJS mountlist.o"
-fi
-
-# Check for SunOS statfs brokenness wrt partitions 2GB and larger.
-# If <sys/vfs.h> exists and struct statfs has a member named f_spare,
-# enable the work-around code in fsusage.c.
-AC_MSG_CHECKING([for statfs that truncates block counts])
-AC_CACHE_VAL(fu_cv_sys_truncating_statfs,
-[AC_TRY_COMPILE([
-#if !defined(sun) && !defined(__sun)
-choke -- this is a workaround for a Sun-specific problem
-#endif
-#include <sys/types.h>
-#include <sys/vfs.h>],
-[struct statfs t; long c = *(t.f_spare);],
-fu_cv_sys_truncating_statfs=yes,
-fu_cv_sys_truncating_statfs=no,
-)])
-if test $fu_cv_sys_truncating_statfs = yes; then
-AC_DEFINE(STATFS_TRUNCATES_BLOCK_COUNTS, 1, [dummy])
-fi
-AC_MSG_RESULT($fu_cv_sys_truncating_statfs)
-
-AC_CHECKING(for AFS)
-test -d /afs && AC_DEFINE(AFS, 1, [dummy])
-])
-AC_DEFUN([GNOME_GHTTP_CHECK],[
- AC_REQUIRE([GNOME_INIT_HOOK])
- GHTTP_LIB=
- AC_CHECK_FUNC(connect,,[
- AC_CHECK_LIB(socket,connect,
- GHTTP_LIB="-lsocket $GHTTP_LIB",,$GHTTP_LIB)])
- AC_CHECK_FUNC(gethostbyname,,[
- AC_CHECK_LIB(nsl,gethostbyname,
- GHTTP_LIB="-lnsl $GHTTP_LIB",,$GHTTP_LIB)])
- AC_CHECK_LIB(ghttp, ghttp_request_new,
- GHTTP_LIB="-lghttp $GHTTP_LIB",GHTTP_LIB="",-L$gnome_prefix $GHTTP_LIB)
- AC_SUBST(GHTTP_LIB)
- AC_PROVIDE([GNOME_GHTTP_CHECK])
-])
-dnl
-dnl GNOME_GNORBA_HOOK (script-if-gnorba-found, failflag)
-dnl
-dnl if failflag is "failure" it aborts if gnorba is not found.
-dnl
-
-AC_DEFUN([GNOME_GNORBA_HOOK],[
- GNOME_ORBIT_HOOK([],$2)
- AC_CACHE_CHECK([for gnorba libraries],gnome_cv_gnorba_found,[
- gnome_cv_gnorba_found=no
- if test x$gnome_cv_orbit_found = xyes; then
- GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
- GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
- if test -n "$GNORBA_LIBS"; then
- gnome_cv_gnorba_found=yes
- fi
- fi
- ])
- AM_CONDITIONAL(HAVE_GNORBA, test x$gnome_cv_gnorba_found = xyes)
- if test x$gnome_cv_orbit_found = xyes; then
- $1
- GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
- GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
- AC_SUBST(GNORBA_CFLAGS)
- AC_SUBST(GNORBA_LIBS)
- else
- if test x$2 = xfailure; then
- AC_MSG_ERROR(gnorba library not installed or installation problem)
- fi
- fi
-])
-
-AC_DEFUN([GNOME_GNORBA_CHECK], [
- GNOME_GNORBA_HOOK([],failure)
-])
-dnl
-dnl GNOME_CHECK_GUILE (failflag)
-dnl
-dnl if failflag is "fail" then GNOME_CHECK_GUILE will abort if guile is not found.
-dnl
-
-AC_DEFUN([GNOME_CHECK_GUILE],
-[
- saved_ldflags="$LDFLAGS"
- saved_cppflags="$CPPFLAGS"
- LDFLAGS="$LDFLAGS $GNOME_LIBDIR"
-
- AC_CHECK_LIB(qthreads,qt_null,[
- QTTHREADS_LIB="-lqthreads"
- ],[
- AC_CHECK_LIB(qt, qt_null, QTTHREADS_LIB="-lqt")
- ],$LIBS)
- AC_SUBST(QTTHREADS_LIB)
-
- AC_CHECK_LIB(termcap,main,TERMCAP_LIB="-ltermcap")
- AC_CHECK_LIB(readline,main,READLINE_LIB="-lreadline",,$TERMCAP_LIB)
-
- AC_SUBST(TERMCAP_LIB)
- AC_SUBST(READLINE_LIB)
-
- if test "x$cross_compiling" = "xyes" ; then
- name_build_guile="$target_alias-guile-config"
- else
- name_build_guile="guile-config"
- fi
-
- AC_CHECK_PROG(BUILD_GUILE, $name_build_guile, yes, no)
-
- if test "x$BUILD_GUILE" = "xyes"; then
- AC_MSG_CHECKING(whether $name_build_guile works)
- if test x`$name_build_guile --version >/dev/null 2>&1 || \
- echo no` = xno; then
- BUILD_GUILE=no
- fi
- AC_MSG_RESULT($BUILD_GUILE)
- else
-
- if test "x$cross_compiling" = "xyes" ; then
- name_build_guile="$target_alias-build-guile"
- else
- name_build_guile="build-guile"
- fi
-
- AC_CHECK_PROG(BUILD_GUILE, $name_build_guile, yes, no)
-
- if test "x$BUILD_GUILE" = "xyes"; then
- AC_MSG_CHECKING(whether $name_build_guile works)
- if test x`$name_build_guile --version >/dev/null 2>&1 || \
- echo no` = xno; then
- BUILD_GUILE=no
- fi
- AC_MSG_RESULT($BUILD_GUILE)
- fi
- fi
-
- AC_CHECK_LIB(m, sin)
-
- if test "x$BUILD_GUILE" = "xyes"; then
- AC_MSG_CHECKING(for guile libraries)
- GUILE_LIBS="`$name_build_guile link`"
- AC_MSG_RESULT($GUILE_LIBS)
- AC_MSG_CHECKING(for guile headers)
- GUILE_INCS="`$name_build_guile compile`"
- AC_MSG_RESULT($GUILE_INCS)
- else
- GUILE_LIBS="$GNOME_LIBDIR"
- GUILE_INCS="$GNOME_INCLUDEDIR"
- AC_CHECK_LIB(rx, main, GUILE_LIBS="-lrx $GUILE_LIBS")
- AC_CHECK_LIB(qt, qt_null, GUILE_LIBS="-lqt $GUILE_LIBS")
- AC_CHECK_LIB(dl, dlopen, GUILE_LIBS="-ldl $GUILE_LIBS")
- AC_CHECK_LIB(nsl, t_accept, GUILE_LIBS="$GUILE_LIBS -lnsl")
- AC_CHECK_LIB(socket, socket, GUILE_LIBS="$GUILE_LIBS -lsocket")
- GUILE_LIBS="-lguile $GUILE_LIBS $QTTHREADS_LIB $READLINE_LIB $TERMCAP_LIB"
- fi
-
- AC_SUBST(GUILE_LIBS)
- AC_SUBST(GUILE_INCS)
-
- saved_LIBS="$LIBS"
- LIBS="$LIBS $GUILE_LIBS"
- CPPFLAGS="$saved_cppflags $GUILE_INCS"
-
- AC_MSG_CHECKING(whether guile works)
- AC_TRY_LINK([
- #include <libguile.h>
- #include <guile/gh.h>
- ],[
- gh_eval_str("(newline)");
- scm_boot_guile(0,NULL,NULL,NULL);
- ],[
- ac_cv_guile_found=yes
- AC_DEFINE(HAVE_GUILE, 1, [dummy])
- ],[
- ac_cv_guile_found=no
- ])
- AC_MSG_RESULT($ac_cv_guile_found)
-
- if test x$ac_cv_guile_found = xno ; then
- if test x$1 = xfail ; then
- AC_MSG_ERROR(Can not find Guile on this system)
- else
- AC_MSG_WARN(Can not find Guile on this system)
- fi
- ac_cv_guile_found=no
- GUILE_LIBS= GUILE_INCS=
- fi
-
- LIBS="$saved_LIBS"
- LDFLAGS="$saved_ldflags"
- CPPFLAGS="$saved_cppflags"
-
- AC_SUBST(GUILE_LIBS)
- AM_CONDITIONAL(GUILE, test x$ac_cv_guile_found = xyes)
-])
-dnl
-dnl LIBGTOP_CHECK_TYPE
-dnl
-dnl Improved version of AC_CHECK_TYPE which takes into account
-dnl that we need to #include some other header files on some
-dnl systems to get some types.
-
-dnl AC_LIBGTOP_CHECK_TYPE(TYPE, DEFAULT)
-AC_DEFUN(AC_LIBGTOP_CHECK_TYPE,
-[AC_REQUIRE([AC_HEADER_STDC])dnl
-AC_MSG_CHECKING(for $1)
-AC_CACHE_VAL(ac_cv_type_$1,
-[AC_EGREP_CPP(dnl
-changequote(<<,>>)dnl
-<<(^|[^a-zA-Z_0-9])$1[^a-zA-Z_0-9]>>dnl
-changequote([,]), [#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-
-/* For Tru64 */
-#ifdef HAVE_SYS_BITYPES_H
-#include <sys/bitypes.h>
-#endif
-], ac_cv_type_$1=yes, ac_cv_type_$1=no)])dnl
-AC_MSG_RESULT($ac_cv_type_$1)
-if test $ac_cv_type_$1 = no; then
- AC_DEFINE($1, $2, [dummy])
-fi
-])
-
-dnl
-dnl GNOME_LIBGTOP_TYPES
-dnl
-dnl some typechecks for libgtop.
-dnl
-
-AC_DEFUN([GNOME_LIBGTOP_TYPES],
-[
- AC_CHECK_HEADERS(sys/bitypes.h)
- AC_LIBGTOP_CHECK_TYPE(u_int64_t, unsigned long long int)
- AC_LIBGTOP_CHECK_TYPE(int64_t, signed long long int)
-])
-
-dnl
-dnl GNOME_LIBGTOP_HOOK (minversion, script-if-libgtop-enabled, failflag)
-dnl
-dnl if failflag is "fail" then GNOME_LIBGTOP_HOOK will abort if LibGTop
-dnl is not found.
-dnl
-
-AC_DEFUN([GNOME_LIBGTOP_HOOK],
-[
- AC_REQUIRE([GNOME_LIBGTOP_TYPES])
-
- AC_SUBST(LIBGTOP_LIBDIR)
- AC_SUBST(LIBGTOP_INCLUDEDIR)
- AC_SUBST(LIBGTOP_EXTRA_LIBS)
- AC_SUBST(LIBGTOP_LIBS)
- AC_SUBST(LIBGTOP_INCS)
- AC_SUBST(LIBGTOP_NAMES_LIBS)
- AC_SUBST(LIBGTOP_NAMES_INCS)
- AC_SUBST(LIBGTOP_MAJOR_VERSION)
- AC_SUBST(LIBGTOP_MINOR_VERSION)
- AC_SUBST(LIBGTOP_MICRO_VERSION)
- AC_SUBST(LIBGTOP_VERSION)
- AC_SUBST(LIBGTOP_VERSION_CODE)
- AC_SUBST(LIBGTOP_SERVER_VERSION)
- AC_SUBST(LIBGTOP_INTERFACE_AGE)
- AC_SUBST(LIBGTOP_BINARY_AGE)
- AC_SUBST(LIBGTOP_BINDIR)
- AC_SUBST(LIBGTOP_SERVER)
-
- dnl Get the cflags and libraries from the libgtop-config script
- dnl
- AC_ARG_WITH(libgtop,
- [ --with-libgtop=PFX Prefix where LIBGTOP is installed (optional)],
- libgtop_config_prefix="$withval", libgtop_config_prefix="")
- AC_ARG_WITH(libgtop-exec,
- [ --with-libgtop-exec=PFX Exec prefix where LIBGTOP is installed (optional)],
- libgtop_config_exec_prefix="$withval", libgtop_config_exec_prefix="")
-
- if test x$libgtop_config_exec_prefix != x ; then
- libgtop_config_args="$libgtop_config_args --exec-prefix=$libgtop_config_exec_prefix"
- if test x${LIBGTOP_CONFIG+set} != xset ; then
- LIBGTOP_CONFIG=$libgtop_config_exec_prefix/bin/libgtop-config
- fi
- fi
- if test x$libgtop_config_prefix != x ; then
- libgtop_config_args="$libgtop_config_args --prefix=$libgtop_config_prefix"
- if test x${LIBGTOP_CONFIG+set} != xset ; then
- LIBGTOP_CONFIG=$libgtop_config_prefix/bin/libgtop-config
- fi
- fi
-
- AC_PATH_PROG(LIBGTOP_CONFIG, libgtop-config, no)
- dnl IMPORTANT NOTICE:
- dnl If you increase this number here, this means that *ALL*
- dnl modules will require the new version, even if they explicitly
- dnl give a lower number in their `configure.in' !!!
- real_min_libgtop_version=1.0.0
- min_libgtop_version=ifelse([$1], ,$real_min_libgtop_version,$1)
- dnl I know, the following code looks really ugly, but if you want
- dnl to make changes, please test it with a brain-dead /bin/sh and
- dnl with a brain-dead /bin/test (not all shells/tests support the
- dnl `<' operator to compare strings, that's why I convert everything
- dnl into numbers and test them).
- min_libgtop_major=`echo $min_libgtop_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- min_libgtop_minor=`echo $min_libgtop_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- min_libgtop_micro=`echo $min_libgtop_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- test x$min_libgtop_micro = x && min_libgtop_micro=0
- real_min_libgtop_major=`echo $real_min_libgtop_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- real_min_libgtop_minor=`echo $real_min_libgtop_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- real_min_libgtop_micro=`echo $real_min_libgtop_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- test x$real_min_libgtop_micro = x && real_min_libgtop_micro=0
- dnl You cannot require a version less then $real_min_libgtop_version,
- dnl so you don't need to update each `configure.in' when it's increased.
- if test $real_min_libgtop_major -gt $min_libgtop_major ; then
- min_libgtop_major=$real_min_libgtop_major
- min_libgtop_minor=$real_min_libgtop_minor
- min_libgtop_micro=$real_min_libgtop_micro
- elif test $real_min_libgtop_major = $min_libgtop_major ; then
- if test $real_min_libgtop_minor -gt $min_libgtop_minor ; then
- min_libgtop_minor=$real_min_libgtop_minor
- min_libgtop_micro=$real_min_libgtop_micro
- elif test $real_min_libgtop_minor = $min_libgtop_minor ; then
- if test $real_min_libgtop_micro -gt $min_libgtop_micro ; then
- min_libgtop_micro=$real_min_libgtop_micro
- fi
- fi
- fi
- min_libgtop_version="$min_libgtop_major.$min_libgtop_minor.$min_libgtop_micro"
- AC_MSG_CHECKING(for libgtop - version >= $min_libgtop_version)
- no_libgtop=""
- if test "$LIBGTOP_CONFIG" = "no" ; then
- no_libgtop=yes
- else
- configfile=`$LIBGTOP_CONFIG --config`
- libgtop_major_version=`$LIBGTOP_CONFIG --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- libgtop_minor_version=`$LIBGTOP_CONFIG --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- libgtop_micro_version=`$LIBGTOP_CONFIG --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test $libgtop_major_version != $min_libgtop_major ; then
- no_libgtop=mismatch
- else
- test $libgtop_minor_version -lt $min_libgtop_minor && no_libgtop=yes
- if test $libgtop_minor_version = $min_libgtop_minor ; then
- test $libgtop_micro_version -lt $min_libgtop_micro && no_libgtop=yes
- fi
- fi
- . $configfile
- fi
- if test x$no_libgtop = x ; then
- AC_DEFINE(HAVE_LIBGTOP, 1, [dummy])
- AC_DEFINE_UNQUOTED(LIBGTOP_VERSION, "$LIBGTOP_VERSION", [dummy])
- AC_DEFINE_UNQUOTED(LIBGTOP_VERSION_CODE, $LIBGTOP_VERSION_CODE, [dummy])
- AC_DEFINE_UNQUOTED(LIBGTOP_MAJOR_VERSION, $LIBGTOP_MAJOR_VERSION, [dummy])
- AC_DEFINE_UNQUOTED(LIBGTOP_MINOR_VERSION, $LIBGTOP_MINOR_VERSION, [dummy])
- AC_DEFINE_UNQUOTED(LIBGTOP_MICRO_VERSION, $LIBGTOP_MICRO_VERSION, [dummy])
- AC_DEFINE_UNQUOTED(LIBGTOP_SERVER_VERSION, $LIBGTOP_SERVER_VERSION, [dummy]
- AC_MSG_RESULT(yes)
- dnl Note that an empty true branch is not valid sh syntax.
- ifelse([$2], [], :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$no_libgtop"x = mismatchx; then
- AC_MSG_ERROR(LibGTop major version mismatch $libgtop_major_version != $min_libgtop_major)
- fi
- if test "x$3" = "xfail"; then
- AC_MSG_ERROR(LibGTop >= $min_libgtop_version not found)
- else
- AC_MSG_WARN(LibGTop >= $min_libgtop_version not found)
- fi
- fi
-
- AM_CONDITIONAL(HAVE_LIBGTOP, test x$no_libgtop != xyes)
-])
-
-AC_DEFUN([GNOME_INIT_LIBGTOP],[
- GNOME_LIBGTOP_HOOK($1,[ifelse([$3], [], :, [$3])],$2)
-])
-
-dnl
-dnl GNOME_LIBGTOP_DOCU
-dnl
-dnl checks whether the documentation of LibGTop is installed
-dnl
-
-AC_DEFUN([GNOME_LIBGTOP_DOCU],
-[
- AC_REQUIRE([GNOME_LIBGTOP_HOOK])
-
- helpdir="$LIBGTOP_DATADIR/gnome/help/libgtop"
-
- AC_MSG_CHECKING(whether you have the LibGTop Documentation)
-
- if test -f "$helpdir/C/topic.dat" ; then
- have_libgtop_docu=yes
- AC_DEFINE(HAVE_LIBGTOP_DOCU, 1, [dummy])
- else
- have_libgtop_docu=no
- fi
-
- AC_MSG_RESULT($have_libgtop_docu)
-
- AM_CONDITIONAL(HAVE_LIBGTOP_DOCU, test x$have_libgtop_docu = xyes)
-])
-
-AC_DEFUN([GNOME_CHECK_OBJC],
-[
-dnl Look for an ObjC compiler.
-dnl FIXME: extend list of possible names of ObjC compilers.
- AC_CHECK_PROGS(OBJC, $OBJC egcs, "")
- if test "x$OBJC" = "x" ; then
- AC_CHECK_PROGS(OBJC, $OBJC egcc, "")
- if test "x$OBJC" = "x" ; then
- AC_CHECK_PROGS(OBJC, $OBJC gcc, "")
- fi
- fi
-
- AC_REQUIRE([GNOME_PTHREAD_CHECK])
-
- OBJC_LIBS="-lobjc $PTHREAD_LIB"
- AC_CHECK_FUNC(sched_yield,,[
- AC_CHECK_LIB(rt,sched_yield,
- OBJC_LIBS="$OBJC_LIBS -lrt",[
- AC_CHECK_LIB(posix4,sched_yield,
- OBJC_LIBS="$OBJC_LIBS -lposix4",,
- $OBJC_LIBS)],
- $OBJC_LIBS)])
- AC_SUBST(OBJC_LIBS)
-
- AC_CACHE_CHECK([if Objective C compiler ($OBJC) works],
- ac_cv_prog_objc_works, [
- if test -n "$OBJC"; then
- cat > conftest.m <<EOF
-#include <objc/Object.h>
-@interface myRandomObj : Object
-{
-}
-@end
-@implementation myRandomObj
-@end
-int main () {
- /* No, you are not seeing double. Remember that square brackets
- are the autoconf m4 quotes. */
- id myid = [[myRandomObj alloc]];
- [[myid free]];
- return 0;
-}
-EOF
-
- $OBJC $CFLAGS -o conftest $LDFLAGS conftest.m $OBJC_LIBS 1>&AC_FD_CC 2>&1
- result=$?
- rm -f conftest*
-
- if test $result -eq 0; then
- ac_cv_prog_objc_works=yes
- fi
- else
- ac_cv_prog_objc_works=no
- fi
- ])
-
- AM_CONDITIONAL(OBJECTIVE_C, test x$ac_cv_prog_objc_works = xyes)
- dnl Also set the shell variable OBJECTIVE_C to "yes" or "no".
- OBJECTIVE_C=$ac_cv_prog_objc_works
-])
-
-AC_DEFUN([GNOME_INIT_OBJC],
-[
- AC_MSG_CHECKING(for an obGnomeConf.sh)
- my_gnome_libdir=`$GNOME_CONFIG --libdir`
- if test -f $my_gnome_libdir/obGnomeConf.sh; then
- . $my_gnome_libdir/obGnomeConf.sh
- AC_MSG_RESULT(found $my_gnome_libdir)
- ac_cv_have_gnome_objc=yes
- else
- AC_MSG_RESULT(not found)
- AC_MSG_WARN(Could not find the obGnomeConf.sh file that is generated by gnome-objc install)
- ac_cv_have_gnome_objc=no
- fi
-
- dnl Add a conditional on whether or not we have gnome-objc
- AM_CONDITIONAL(HAVE_GNOME_OBJC, test x$ac_cv_have_gnome_objc = xyes)
- HAVE_GNOME_OBJC=$ac_cv_have_gnome_objc
-
- AC_SUBST(OBGNOME_INCLUDEDIR)
- AC_SUBST(OBGNOME_LIBS)
- AC_SUBST(OBGTK_LIBS)
-])
-dnl
-dnl GNOME_ORBIT_HOOK (script-if-orbit-found, failflag)
-dnl
-dnl if failflag is "failure" it aborts if orbit is not found.
-dnl
-
-AC_DEFUN([GNOME_ORBIT_HOOK],[
- AC_PATH_PROG(ORBIT_CONFIG,orbit-config,no)
- AC_PATH_PROG(ORBIT_IDL,orbit-idl,no)
- AC_CACHE_CHECK([for working ORBit environment],gnome_cv_orbit_found,[
- if test x$ORBIT_CONFIG = xno -o x$ORBIT_IDL = xno; then
- gnome_cv_orbit_found=no
- else
- gnome_cv_orbit_found=yes
- fi
- ])
- AM_CONDITIONAL(HAVE_ORBIT, test x$gnome_cv_orbit_found = xyes)
- if test x$gnome_cv_orbit_found = xyes; then
- $1
- ORBIT_CFLAGS=`orbit-config --cflags client server`
- ORBIT_LIBS=`orbit-config --use-service=name --libs client server`
- AC_SUBST(ORBIT_CFLAGS)
- AC_SUBST(ORBIT_LIBS)
- else
- if test x$2 = xfailure; then
- AC_MSG_ERROR(ORBit not installed or installation problem)
- fi
- fi
-])
-
-AC_DEFUN([GNOME_ORBIT_CHECK], [
- GNOME_ORBIT_HOOK([],failure)
-])
-# Configure paths for GNOME-PRINT
-# Chris Lahey 99-2-5
-# stolen from Manish Singh again
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_GNOME_PRINT([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for GNOME-PRINT, and define GNOME_PRINT_CFLAGS and GNOME_PRINT_LIBS
-dnl
-AC_DEFUN(AM_PATH_GNOME_PRINT,
-[dnl
-dnl Get the cflags and libraries from the gnome-config script
-dnl
-AC_ARG_WITH(gnome-print-prefix,[ --with-gnome-print-prefix=PFX Prefix where GNOME-PRINT is installed (optional)],
- gnome_print_prefix="$withval", gnome_print_prefix="")
-AC_ARG_WITH(gnome-print-exec-prefix,[ --with-gnome-print-exec-prefix=PFX Exec prefix where GNOME-PRINT is installed (optional)],
- gnome_print_exec_prefix="$withval", gnome_print_exec_prefix="")
-AC_ARG_ENABLE(gnome-printtest, [ --disable-gnome-printtest Do not try to compile and run a test GNOME-PRINT program],
- , enable_gnome_printtest=yes)
-
- if test x$gnome_print_exec_prefix != x ; then
- gnome_print_args="$gnome_print_args --exec-prefix=$gnome_print_exec_prefix"
- if test x${GNOME_CONFIG+set} != xset ; then
- GNOME_CONFIG=$gnome_print_exec_prefix/bin/gnome-config
- fi
- fi
- if test x$gnome_print_prefix != x ; then
- gnome_print_args="$gnome_print_args --prefix=$gnome_print_prefix"
- if test x${GNOME_CONFIG+set} != xset ; then
- GNOME_CONFIG=$gnome_print_prefix/bin/gnome-config
- fi
- fi
-
- AC_PATH_PROG(GNOME_CONFIG, gnome-config, no)
- min_gnome_print_version=ifelse([$1], ,0.1.0,$1)
- AC_MSG_CHECKING(for GNOME-PRINT - version >= $min_gnome_print_version)
- no_gnome_print=""
- if test "$GNOME_CONFIG" = "no" ; then
- no_gnome_print=yes
- else
- GNOME_PRINT_CFLAGS=`$GNOME_CONFIG $gnome_printconf_args --cflags print`
- GNOME_PRINT_LIBS=`$GNOME_CONFIG $gnome_printconf_args --libs print`
-
- gnome_print_major_version=`$GNOME_CONFIG $gnome_print_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- gnome_print_minor_version=`$GNOME_CONFIG $gnome_print_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- gnome_print_micro_version=`$GNOME_CONFIG $gnome_print_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_gnome_printtest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $GNOME_PRINT_CFLAGS"
- LIBS="$LIBS $GNOME_PRINT_LIBS"
-dnl
-dnl Now check if the installed GNOME-PRINT is sufficiently new. (Also sanity
-dnl checks the results of gnome-config to some extent
-dnl
- rm -f conf.gnome_printtest
- AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <libgnomeprint/gnome-print.h>
-
-static char*
-my_strdup (char *str)
-{
- char *new_str;
-
- if (str)
- {
- new_str = malloc ((strlen (str) + 1) * sizeof(char));
- strcpy (new_str, str);
- }
- else
- new_str = NULL;
-
- return new_str;
-}
-
-int main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.gnome_printtest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = my_strdup("$min_gnome_print_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_gnome_print_version");
- exit(1);
- }
- return 0;
-#if 0
- if (($gnome_print_major_version > major) ||
- (($gnome_print_major_version == major) && ($gnome_print_minor_version > minor)) ||
- (($gnome_print_major_version == major) && ($gnome_print_minor_version == minor) && ($gnome_print_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** 'gnome-config print --version' returned %d.%d.%d, but the minimum version\n", $gnome_print_major_version, $gnome_print_minor_version, $gnome_print_micro_version);
- printf("*** of GNOME-PRINT required is %d.%d.%d. If gnome-config is correct, then it is\n", major, minor, micro);
- printf("*** best to upgrade to the required version.\n");
- printf("*** If gnome-config was wrong, set the environment variable GNOME_CONFIG\n");
- printf("*** to point to the correct copy of gnome-config, and remove the file\n");
- printf("*** config.cache before re-running configure\n");
- return 1;
- }
-#endif
-}
-
-],, no_gnome_print=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_gnome_print" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$GNOME_CONFIG" = "no" ; then
- echo "*** The gnome-config script installed by GNOME-LIBS could not be found"
- echo "*** If GNOME-PRINT was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GNOME_CONFIG environment variable to the"
- echo "*** full path to gnome-config."
- else
- if test -f conf.gnome_printtest ; then
- :
- else
- echo "*** Could not run GNOME-PRINT test program, checking why..."
- CFLAGS="$CFLAGS $GNOME_PRINT_CFLAGS"
- LIBS="$LIBS $GNOME_PRINT_LIBS"
- AC_TRY_LINK([
-#include <stdio.h>
-#include <libgnomeprint/gnome-print.h>
-], [ return 0; ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GNOME-PRINT or finding the wrong"
- echo "*** version of GNOME-PRINT. If it is not finding GNOME-PRINT, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GNOME-PRINT was incorrectly installed"
- echo "*** or that you have moved GNOME-PRINT since it was installed. In the latter case, you"
- echo "*** may want to edit the gnome-config script: $GNOME_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- GNOME_PRINT_CFLAGS=""
- GNOME_PRINT_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(GNOME_PRINT_CFLAGS)
- AC_SUBST(GNOME_PRINT_LIBS)
- rm -f conf.gnome_printtest
-])
-
-AC_DEFUN([GNOME_PRINT_CHECK], [
- AM_PATH_GNOME_PRINT(0.1.0,,[AC_MSG_ERROR(GNOME-PRINT not found)])
-])
-dnl
-dnl And better, use gthreads instead...
-dnl
-
-AC_DEFUN([GNOME_PTHREAD_CHECK],[
- PTHREAD_LIB=""
- AC_CHECK_LIB(pthread, pthread_create, PTHREAD_LIB="-lpthread",
- [AC_CHECK_LIB(pthreads, pthread_create, PTHREAD_LIB="-lpthreads",
- [AC_CHECK_LIB(c_r, pthread_create, PTHREAD_LIB="-lc_r",
- [AC_CHECK_FUNC(pthread_create)]
- )]
- )]
- )
- AC_SUBST(PTHREAD_LIB)
- AC_PROVIDE([GNOME_PTHREAD_CHECK])
-])
-dnl GNOME_SUPPORT_CHECKS
-dnl Check for various support functions needed by the standard
-dnl Gnome libraries. Sets LIBOBJS, might define some macros.
-dnl This should only be used when building the Gnome libs;
-dnl Gnome clients should not need this macro.
-AC_DEFUN([GNOME_SUPPORT_CHECKS],[
- # we need an `awk' to build `gnomesupport.h'
- AC_REQUIRE([AC_PROG_AWK])
-
- # this should go away soon
- need_gnome_support=yes
-
- save_LIBOBJS="$LIBOBJS"
- LIBOBJS=
-
- AC_CHECK_FUNCS(getopt_long,,LIBOBJS="$LIBOBJS getopt.o getopt1.o")
-
- # for `scandir'
- AC_HEADER_DIRENT
-
- # copied from `configure.in' of `libiberty'
- vars="program_invocation_short_name program_invocation_name sys_errlist"
- for v in $vars; do
- AC_MSG_CHECKING([for $v])
- AC_CACHE_VAL(gnome_cv_var_$v,
- [AC_TRY_LINK([int *p;], [extern int $v; p = &$v;],
- [eval "gnome_cv_var_$v=yes"],
- [eval "gnome_cv_var_$v=no"])])
- if eval "test \"`echo '$gnome_cv_var_'$v`\" = yes"; then
- AC_MSG_RESULT(yes)
- n=HAVE_`echo $v | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- AC_DEFINE_UNQUOTED($n, 1, [dummy])
- else
- AC_MSG_RESULT(no)
- fi
- done
-
- AC_REPLACE_FUNCS(memmove mkstemp scandir strcasecmp strerror strndup strnlen)
- AC_REPLACE_FUNCS(strtok_r strtod strtol strtoul vasprintf vsnprintf)
-
- AC_CHECK_FUNCS(realpath,,LIBOBJS="$LIBOBJS canonicalize.o")
-
- # to include `error.c' error.c has some HAVE_* checks
- AC_CHECK_FUNCS(vprintf doprnt strerror_r)
- AC_FUNC_ERROR_AT_LINE
-
- # This is required if we declare setreuid () and setregid ().
- AC_TYPE_UID_T
-
- # see if we need to declare some functions. Solaris is notorious for
- # putting functions into the `libc' but not listing them in the headers
- AC_CHECK_HEADERS(string.h strings.h stdlib.h unistd.h dirent.h)
- GCC_NEED_DECLARATIONS(gethostname setreuid setregid getpagesize)
- GCC_NEED_DECLARATION(scandir,[
-#ifdef HAVE_DIRENT_H
-#include <dirent.h>
-#endif
-])
-
- # Turn our LIBOBJS into libtool objects. This is gross, but it
- # requires changes to autoconf before it goes away.
- LTLIBOBJS=`echo "$LIBOBJS" | sed 's/\.o/.lo/g'`
- AC_SUBST(need_gnome_support)
- AC_SUBST(LTLIBOBJS)
-
- LIBOBJS="$save_LIBOBJS"
- AM_CONDITIONAL(BUILD_GNOME_SUPPORT, test "$need_gnome_support" = yes)
-])
-dnl GNOME_UNDELFS_CHECKS
-dnl Check for ext2fs undel support.
-dnl Set shell variable ext2fs_undel to "yes" if we have it,
-dnl "no" otherwise. May define USE_EXT2FSLIB for cpp.
-dnl Will set EXT2FS_UNDEL_LIBS to required libraries.
-
-AC_DEFUN([GNOME_UNDELFS_CHECKS], [
- AC_CHECK_HEADERS(ext2fs/ext2fs.h linux/ext2_fs.h)
- ext2fs_undel=no
- EXT2FS_UNDEL_LIBS=
- if test x$ac_cv_header_ext2fs_ext2fs_h = xyes
- then
- if test x$ac_cv_header_linux_ext2_fs_h = xyes
- then
- AC_DEFINE(USE_EXT2FSLIB, 1, [dummy])
- ext2fs_undel=yes
- EXT2FS_UNDEL_LIBS="-lext2fs -lcom_err"
- fi
- fi
-])
-dnl GNOME_VFS_CHECKS
-dnl Check for various functions needed by libvfs.
-dnl This has various effects:
-dnl Sets GNOME_VFS_LIBS to libraries required
-dnl Sets termnet to true or false depending on whether it is required.
-dnl If yes, defines USE_TERMNET.
-dnl Sets vfs_flags to "pretty" list of vfs implementations we include.
-dnl Sets shell variable use_vfs to yes (default, --with-vfs) or
-dnl "no" (--without-vfs).
-dnl Calls AC_SUBST(mcserv), which is either empty or "mcserv".
-
-dnl Private define
-AC_DEFUN([GNOME_WITH_VFS],[
- dnl FIXME: network checks should probably be in their own macro.
- AC_CHECK_LIB(nsl, t_accept)
- AC_CHECK_LIB(socket, socket)
-
- have_socket=no
- AC_CHECK_FUNCS(socket, have_socket=yes)
- if test $have_socket = no; then
- # socket is not in the default libraries. See if it's in some other.
- for lib in bsd socket inet; do
- AC_CHECK_LIB($lib, socket, [
- LIBS="$LIBS -l$lib"
- have_socket=yes
- AC_DEFINE(HAVE_SOCKET, 1, [dummy])
- break])
- done
- fi
-
- have_gethostbyname=no
- AC_CHECK_FUNC(gethostbyname, have_gethostbyname=yes)
- if test $have_gethostbyname = no; then
- # gethostbyname is not in the default libraries. See if it's in some other.
- for lib in bsd socket inet; do
- AC_CHECK_LIB($lib, gethostbyname, [LIBS="$LIBS -l$lib"; have_gethostbyname=yes; break])
- done
- fi
-
- vfs_flags="tarfs"
- use_net_code=false
- if test $have_socket = yes; then
- AC_STRUCT_LINGER
- AC_CHECK_FUNCS(pmap_set, , [
- AC_CHECK_LIB(rpc, pmap_set, [
- LIBS="-lrpc $LIBS"
- AC_DEFINE(HAVE_PMAP_SET, 1, [dummy])
- ])])
- AC_CHECK_FUNCS(pmap_getport pmap_getmaps rresvport)
- dnl add for source routing support setsockopt
- AC_CHECK_HEADERS(rpc/pmap_clnt.h)
- vfs_flags="$vfs_flags, mcfs, ftpfs, fish"
- use_net_code=true
- fi
-
- dnl
- dnl Samba support
- dnl
- smbfs=""
- SAMBAFILES=""
- AC_ARG_WITH(samba,
- [--with-samba Support smb virtual file system],[
- if test "x$withval != xno"; then
- AC_DEFINE(WITH_SMBFS, 1, [dummy])
- vfs_flags="$vfs_flags, smbfs"
- smbfs="smbfs.o"
- SAMBAFILES="\$(SAMBAFILES)"
- fi
- ])
- AC_SUBST(smbfs)
- AC_SUBST(SAMBAFILES)
-
- dnl
- dnl The termnet support
- dnl
- termnet=false
- AC_ARG_WITH(termnet,
- [--with-termnet If you want a termified net support],[
- if test x$withval = xyes; then
- AC_DEFINE(USE_TERMNET, 1, [dummy])
- termnet=true
- fi
- ])
-
- TERMNET=""
- AC_DEFINE(USE_VFS, 1, [dummy])
- if $use_net_code; then
- AC_DEFINE(USE_NETCODE, [dummy])
- fi
- mcserv=
- if test $have_socket = yes; then
- mcserv="mcserv"
- if $termnet; then
- TERMNET="-ltermnet"
- fi
- fi
-
- AC_SUBST(TERMNET)
- AC_SUBST(mcserv)
-
-dnl FIXME:
-dnl GNOME_VFS_LIBS=
-
-])
-
-AC_DEFUN([GNOME_VFS_CHECKS],[
- use_vfs=yes
- AC_ARG_WITH(vfs,
- [--with-vfs Compile with the VFS code],
- use_vfs=$withval
- )
- case $use_vfs in
- yes) GNOME_WITH_VFS;;
- no) use_vfs=no;;
- *) use_vfs=no;;
- dnl Should we issue a warning?
- esac
-])
-
-
-dnl GNOME_X_CHECKS
-dnl
-dnl Basic X11 related checks for X11. At the end, the following will be
-dnl defined/changed:
-dnl GTK_{CFLAGS,LIBS} From AM_PATH_GTK
-dnl CPPFLAGS Will include $X_CFLAGS
-dnl GNOME_HAVE_SM `true' or `false' depending on whether session
-dnl management is available. It is available if
-dnl both -lSM and X11/SM/SMlib.h exist. (Some
-dnl Solaris boxes have the library but not the header)
-dnl XPM_LIBS -lXpm if Xpm library is present, otherwise ""
-dnl
-dnl The following configure cache variables are defined (but not used):
-dnl gnome_cv_passdown_{x_libs,X_LIBS,X_CFLAGS}
-dnl
-AC_DEFUN([GNOME_X_CHECKS],
-[
- AM_PATH_GTK(1.2.0,,AC_MSG_ERROR(GTK not installed, or gtk-config not in path))
- dnl Hope that GTK_CFLAGS have only -I and -D. Otherwise, we could
- dnl test -z "$x_includes" || CPPFLAGS="$CPPFLAGS -I$x_includes"
- dnl
- dnl Use CPPFLAGS instead of CFLAGS because AC_CHECK_HEADERS uses
- dnl CPPFLAGS, not CFLAGS
- CPPFLAGS="$CPPFLAGS $GTK_CFLAGS"
-
- saved_ldflags="$LDFLAGS"
- LDFLAGS="$LDFLAGS $GTK_LIBS"
-
- gnome_cv_passdown_x_libs="$GTK_LIBS"
- gnome_cv_passdown_X_LIBS="$GTK_LIBS"
- gnome_cv_passdown_X_CFLAGS="$GTK_CFLAGS"
- gnome_cv_passdown_GTK_LIBS="$GTK_LIBS"
-
- LDFLAGS="$saved_ldflags $GTK_LIBS"
-
-dnl We are requiring GTK >= 1.1.1, which means this will be fine anyhow.
- USE_DEVGTK=true
-
-dnl AC_MSG_CHECKING([whether to use features from (unstable) GTK+ 1.1.x])
-dnl AC_EGREP_CPP(answer_affirmatively,
-dnl [#include <gtk/gtkfeatures.h>
-dnl #ifdef GTK_HAVE_FEATURES_1_1_0
-dnl answer_affirmatively
-dnl #endif
-dnl ], dev_gtk=yes, dev_gtk=no)
-dnl if test "$dev_gtk" = "yes"; then
-dnl USE_DEVGTK=true
-dnl fi
-dnl AC_MSG_RESULT("$dev_gtk")
-
- GNOME_HAVE_SM=true
- case "$GTK_LIBS" in
- *-lSM*)
- dnl Already found it.
- ;;
- *)
- dnl Assume that if we have -lSM then we also have -lICE.
- AC_CHECK_LIB(SM, SmcSaveYourselfDone,
- [GTK_LIBS="-lSM -lICE $GTK_LIBS"],GNOME_HAVE_SM=false,
- $x_libs -lICE)
- ;;
- esac
-
- if test "$GNOME_HAVE_SM" = true; then
- AC_CHECK_HEADERS(X11/SM/SMlib.h,,GNOME_HAVE_SM=false)
- fi
-
- if test "$GNOME_HAVE_SM" = true; then
- AC_DEFINE(HAVE_LIBSM, 1, [dummy])
- fi
-
- XPM_LIBS=""
- AC_CHECK_LIB(Xpm, XpmFreeXpmImage, [XPM_LIBS="-lXpm"], , $x_libs)
- AC_SUBST(XPM_LIBS)
-
- AC_REQUIRE([GNOME_PTHREAD_CHECK])
- LDFLAGS="$saved_ldflags"
-
- AC_PROVIDE([GNOME_X_CHECKS])
-])
-dnl
-dnl GNOME_XML_HOOK (script-if-xml-found, failflag)
-dnl
-dnl If failflag is "failure", script aborts due to lack of XML
-dnl
-dnl Check for availability of the libxml library
-dnl the XML parser uses libz if available too
-dnl
-
-AC_DEFUN([GNOME_XML_HOOK],[
- AC_PATH_PROG(GNOME_CONFIG,gnome-config,no)
- if test "$GNOME_CONFIG" = no; then
- if test x$2 = xfailure; then
- AC_MSG_ERROR(Could not find gnome-config)
- fi
- fi
- AC_CHECK_LIB(xml, xmlNewDoc, [
- $1
- GNOME_XML_LIB=`$GNOME_CONFIG --libs xml`
- ], [
- if test x$2 = xfailure; then
- AC_MSG_ERROR(Could not link sample xml program)
- fi
- ], `$GNOME_CONFIG --libs xml`)
- AC_SUBST(GNOME_XML_LIB)
-])
-
-AC_DEFUN([GNOME_XML_CHECK], [
- GNOME_XML_HOOK([],failure)
-])
dnl
dnl GNOME_INIT_HOOK (script-if-gnome-enabled, [failflag], [additional-inits])
dnl
AC_ARG_WITH(gnome,
[ --with-gnome Specify prefix for GNOME files],
if test x$withval = xyes; then
- want_gnome=yes
- dnl Note that an empty true branch is not
+ want_gnome=yes
+ dnl Note that an empty true branch is not
dnl valid sh syntax.
- ifelse([$1], [], :, [$1])
- else
- if test "x$withval" = xno; then
- want_gnome=no
- else
- want_gnome=yes
- LDFLAGS="$LDFLAGS -L$withval/lib"
- CFLAGS="$CFLAGS -I$withval/include"
- gnome_prefix=$withval/lib
- fi
- fi,
+ ifelse([$1], [], :, [$1])
+ else
+ if test "x$withval" = xno; then
+ want_gnome=no
+ else
+ want_gnome=yes
+ LDFLAGS="$LDFLAGS -L$withval/lib"
+ CFLAGS="$CFLAGS -I$withval/include"
+ gnome_prefix=$withval/lib
+ fi
+ fi,
want_gnome=yes)
if test "x$want_gnome" = xyes; then
else
AC_MSG_CHECKING(if $GNOME_CONFIG works)
if $GNOME_CONFIG --libs-only-l gnome >/dev/null 2>&1; then
- AC_MSG_RESULT(yes)
- GNOME_GNORBA_HOOK([],$2)
- GNOME_LIBS="`$GNOME_CONFIG --libs-only-l gnome`"
- GNOMEUI_LIBS="`$GNOME_CONFIG --libs-only-l gnomeui`"
- GNOMEGNORBA_LIBS="`$GNOME_CONFIG --libs-only-l gnorba gnomeui`"
- GTKXMHTML_LIBS="`$GNOME_CONFIG --libs-only-l gtkxmhtml`"
+ AC_MSG_RESULT(yes)
+ GNOME_GNORBA_HOOK([],$2)
+ GNOME_LIBS="`$GNOME_CONFIG --libs-only-l gnome`"
+ GNOMEUI_LIBS="`$GNOME_CONFIG --libs-only-l gnomeui`"
+ GNOMEGNORBA_LIBS="`$GNOME_CONFIG --libs-only-l gnorba gnomeui`"
+ GTKXMHTML_LIBS="`$GNOME_CONFIG --libs-only-l gtkxmhtml`"
ZVT_LIBS="`$GNOME_CONFIG --libs-only-l zvt`"
- GNOME_LIBDIR="`$GNOME_CONFIG --libs-only-L gnorba gnomeui`"
- GNOME_INCLUDEDIR="`$GNOME_CONFIG --cflags gnorba gnomeui`"
- $1
+ GNOME_LIBDIR="`$GNOME_CONFIG --libs-only-L gnorba gnomeui`"
+ GNOME_INCLUDEDIR="`$GNOME_CONFIG --cflags gnorba gnomeui`"
+ $1
else
- AC_MSG_RESULT(no)
- no_gnome_config="yes"
- fi
- fi
+ AC_MSG_RESULT(no)
+ no_gnome_config="yes"
+ fi
+ fi
if test x$exec_prefix = xNONE; then
- if test x$prefix = xNONE; then
+ if test x$prefix = xNONE; then
gnome_prefix=$ac_default_prefix/lib
- else
- gnome_prefix=$prefix/lib
- fi
+ else
+ gnome_prefix=$prefix/lib
+ fi
else
- gnome_prefix=`eval echo \`echo $libdir\``
+ gnome_prefix=`eval echo \`echo $libdir\``
fi
if test "$no_gnome_config" = "yes"; then
- AC_MSG_CHECKING(for gnomeConf.sh file in $gnome_prefix)
+ AC_MSG_CHECKING(for gnomeConf.sh file in $gnome_prefix)
if test -f $gnome_prefix/gnomeConf.sh; then
- AC_MSG_RESULT(found)
- echo "loading gnome configuration from" \
+ AC_MSG_RESULT(found)
+ echo "loading gnome configuration from" \
"$gnome_prefix/gnomeConf.sh"
- . $gnome_prefix/gnomeConf.sh
- $1
+ . $gnome_prefix/gnomeConf.sh
+ $1
else
- AC_MSG_RESULT(not found)
- if test x$2 = xfail; then
- AC_MSG_ERROR(Could not find the gnomeConf.sh file that is generated by gnome-libs install)
- fi
+ AC_MSG_RESULT(not found)
+ if test x$2 = xfail; then
+ AC_MSG_ERROR(Could not find the gnomeConf.sh file that is generated by gnome-libs install)
+ fi
fi
- fi
+ fi
fi
if test -n "$3"; then
AC_DEFUN([GNOME_INIT],[
GNOME_INIT_HOOK([],fail,$1)
])
-dnl
-dnl AC_PROG_GPERF (MINIMUM-VERSION)
-dnl
-dnl Check for availability of gperf.
-dnl Abort if not found or if current version is not up to par.
-dnl
-
-AC_DEFUN([AC_PROG_GPERF],[
- AC_PATH_PROG(GPERF, gperf, no)
- if test "$GPERF" = no; then
- AC_MSG_ERROR(Could not find gperf)
- fi
- min_gperf_version=ifelse([$1], ,2.7,$1)
- AC_MSG_CHECKING(for gperf - version >= $min_gperf_version)
- gperf_major_version=`$GPERF --version | \
- sed 's/GNU gperf \([[0-9]]*\).\([[0-9]]*\)/\1/'`
- gperf_minor_version=`$GPERF --version | \
- sed 's/GNU gperf \([[0-9]]*\).\([[0-9]]*\)/\2/'`
- no_gperf=""
-dnl
-dnl Now check if the installed gperf is sufficiently new.
-dnl
- AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-static char*
-my_strdup (char *str)
-{
- char *new_str;
-
- if (str)
- {
- new_str = malloc ((strlen (str) + 1) * sizeof(char));
- strcpy (new_str, str);
- }
- else
- new_str = NULL;
-
- return new_str;
-}
-
-int
-main ()
-{
- char *tmp_version;
-
- int major;
- int minor;
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = my_strdup("$min_gperf_version");
- if (sscanf(tmp_version, "%d.%d", &major, &minor) != 2) {
- printf ("%s, bad version string\n", "$min_gperf_version");
- exit (1);
- }
-
- if (($gperf_major_version > major) ||
- (($gperf_major_version == major) && ($gperf_minor_version >= minor))) {
- return 0;
- } else {
- printf ("\n");
- printf ("*** An old version of gperf ($gperf_major_version.$gperf_minor_version) was found.\n");
- printf ("*** You need a version of gperf newer than %d.%d.%d. The latest version of\n",
- major, minor);
- printf ("*** gperf is always available from ftp://ftp.gnu.org.\n");
- printf ("***\n");
- return 1;
- }
-}
-],,no_gperf=yes,[/bin/true])
- if test "x$no_gperf" = x ; then
- AC_MSG_RESULT(yes)
- else
- AC_MSG_RESULT(no)
- fi
-
-])
-dnl
-dnl Check for struct linger
-dnl
-AC_DEFUN(AC_STRUCT_LINGER, [
-av_struct_linger=no
-AC_MSG_CHECKING(struct linger is available)
-AC_TRY_RUN([
-#include <sys/types.h>
-#include <sys/socket.h>
-
-struct linger li;
-
-main ()
-{
- li.l_onoff = 1;
- li.l_linger = 120;
- exit (0);
-}
-],[
-AC_DEFINE(HAVE_STRUCT_LINGER, 1, [dummy])
-av_struct_linger=yes
-],[
-av_struct_linger=no
-],[
-av_struct_linger=no
-])
-AC_MSG_RESULT($av_struct_linger)
-])
-dnl See whether we need a declaration for a function.
-dnl GCC_NEED_DECLARATION(FUNCTION [, EXTRA-HEADER-FILES])
-AC_DEFUN(GCC_NEED_DECLARATION,
-[AC_MSG_CHECKING([whether $1 must be declared])
-AC_CACHE_VAL(gcc_cv_decl_needed_$1,
-[AC_TRY_COMPILE([
-#include <stdio.h>
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-$2],
-[char *(*pfn) = (char *(*)) $1],
-eval "gcc_cv_decl_needed_$1=no", eval "gcc_cv_decl_needed_$1=yes")])
-if eval "test \"`echo '$gcc_cv_decl_needed_'$1`\" = yes"; then
- AC_MSG_RESULT(yes)
- gcc_need_declarations="$gcc_need_declarations $1"
- gcc_tr_decl=NEED_DECLARATION_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- AC_DEFINE_UNQUOTED($gcc_tr_decl, 1, [dummy])
-else
- AC_MSG_RESULT(no)
-fi
-])dnl
-
-dnl Check multiple functions to see whether each needs a declaration.
-dnl GCC_NEED_DECLARATIONS(FUNCTION... [, EXTRA-HEADER-FILES])
-AC_DEFUN(GCC_NEED_DECLARATIONS,
-[for ac_func in $1
-do
-GCC_NEED_DECLARATION($ac_func, $2)
-done
-]
-)
-# Configure paths for GTK+
-# Owen Taylor 97-11-3
-
-dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
-dnl
-AC_DEFUN(AM_PATH_GTK,
-[dnl
-dnl Get the cflags and libraries from the gtk-config script
-dnl
-AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
- gtk_config_prefix="$withval", gtk_config_prefix="")
-AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
- gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
-AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
- , enable_gtktest=yes)
-
- for module in . $4
- do
- case "$module" in
- gthread)
- gtk_config_args="$gtk_config_args gthread"
- ;;
- esac
- done
-
- if test x$gtk_config_exec_prefix != x ; then
- gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
- if test x${GTK_CONFIG+set} != xset ; then
- GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
- fi
- fi
- if test x$gtk_config_prefix != x ; then
- gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
- if test x${GTK_CONFIG+set} != xset ; then
- GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
- fi
- fi
-
- AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
- min_gtk_version=ifelse([$1], ,0.99.7,$1)
- AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
- no_gtk=""
- if test "$GTK_CONFIG" = "no" ; then
- no_gtk=yes
- else
- GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
- GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
- gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_gtktest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $GTK_CFLAGS"
- LIBS="$GTK_LIBS $LIBS"
-dnl
-dnl Now check if the installed GTK is sufficiently new. (Also sanity
-dnl checks the results of gtk-config to some extent
-dnl
- rm -f conf.gtktest
- AC_TRY_RUN([
-#include <gtk/gtk.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.gtktest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = g_strdup("$min_gtk_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_gtk_version");
- exit(1);
- }
-
- if ((gtk_major_version != $gtk_config_major_version) ||
- (gtk_minor_version != $gtk_config_minor_version) ||
- (gtk_micro_version != $gtk_config_micro_version))
- {
- printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
- $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf ("*** was found! If gtk-config was correct, then it is best\n");
- printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
- printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
- printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
- printf("*** required on your system.\n");
- printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
- printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
- }
-#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
- else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
- (gtk_minor_version != GTK_MINOR_VERSION) ||
- (gtk_micro_version != GTK_MICRO_VERSION))
- {
- printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
- GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
- printf("*** library (version %d.%d.%d)\n",
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- }
-#endif /* defined (GTK_MAJOR_VERSION) ... */
- else
- {
- if ((gtk_major_version > major) ||
- ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
- ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
- major, minor, micro);
- printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
- printf("***\n");
- printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
- printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
- printf("*** correct copy of gtk-config. (In this case, you will have to\n");
- printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
- printf("*** so that the correct libraries are found at run-time))\n");
- }
- }
- return 1;
-}
-],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_gtk" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$GTK_CONFIG" = "no" ; then
- echo "*** The gtk-config script installed by GTK could not be found"
- echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GTK_CONFIG environment variable to the"
- echo "*** full path to gtk-config."
- else
- if test -f conf.gtktest ; then
- :
- else
- echo "*** Could not run GTK test program, checking why..."
- CFLAGS="$CFLAGS $GTK_CFLAGS"
- LIBS="$LIBS $GTK_LIBS"
- AC_TRY_LINK([
-#include <gtk/gtk.h>
-#include <stdio.h>
-], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GTK or finding the wrong"
- echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"
- echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
- echo "*** came with the system with the command"
- echo "***"
- echo "*** rpm --erase --nodeps gtk gtk-devel" ],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GTK was incorrectly installed"
- echo "*** or that you have moved GTK since it was installed. In the latter case, you"
- echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- GTK_CFLAGS=""
- GTK_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(GTK_CFLAGS)
- AC_SUBST(GTK_LIBS)
- rm -f conf.gtktest
-])