# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$[2]
if test -z "[$]$1"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f [$ac_dir/$ac_word]; then
dnl We might want to get or shut warnings.
AC_ARG_WITH(warnings,
- [ --with-warnings tell GNU C++ to display more warnings],,
+ [ --with-warnings tell the compiler to display more warnings],,
[ if test $lyx_devel_version = yes -o $lyx_prerelease = yes && test $ac_cv_prog_gxx = yes ; then
with_warnings=yes;
else
CXXFLAGS="$ac_save_CXXFLAGS"
elif test $ac_cv_prog_cxx_g = yes; then
case $gxx_version in
- 2.7*) CXXFLAGS="$lyx_opt";;
- 2.95.*) CXXFLAGS="-g $lyx_opt -fno-exceptions -fno-rtti -fpermissive";;
- *) CXXFLAGS="-g $lyx_opt -fno-exceptions -fno-rtti";;
+ 2.95.1) CXXFLAGS="-g $lyx_opt -fpermissive -fno-rtti -fno-exceptions";;
+ 2.95.*) CXXFLAGS="-g $lyx_opt -fno-rtti -fno-exceptions";;
+ 2.96*) CXXFLAGS="-g $lyx_opt -fhonor-std";;
+ *2.91.*) CXXFLAGS="-g $lyx_opt -fno-rtti -fno-exceptions";;
+ *) CXXFLAGS="-g $lyx_opt -fno-rtti -fno-exceptions";;
esac
else
CXXFLAGS="$lyx_opt"
fi
if test x$with_warnings = xyes ; then
- CXXFLAGS="$CXXFLAGS -ansi -Wall"
+ case $gxx_version in
+ 2.95.*) CXXFLAGS="$CXXFLAGS -W -Wall -Wconversion -Winline";;
+ 2.96*) CXXFLAGS="$CXXFLAGS -W -Wall -Wconversion -Winline";;
+ *) CXXFLAGS="$CXXFLAGS -ansi -W -Wall -Wno-return-type";;
+ esac
if test $lyx_devel_version = yes ; then
- CXXFLAGS="$CXXFLAGS -pedantic"
+ case $gxx_version in
+ 2.95.*) ;;
+ 2.96*) ;;
+ *2.91*) ;;
+ *) CXXFLAGS="$CXXFLAGS -pedantic";;
+ esac
fi
fi
else
fi])
+dnl Usage: LYX_STD_COUNT : checks wherer the C++ library have a conforming
+dnl count template, if not the old HP version is assumed.
+AC_DEFUN(LYX_STD_COUNT,[
+AC_CACHE_CHECK(for conforming std::count,lyx_cv_std_count,
+ [AC_TRY_COMPILE([
+#include <string>
+#include <algorithm>
+using std::string;
+using std::count;
+int countChar(string const & a, char const c)
+{
+ return count(a.begin(), a.end(), c);
+}
+],[
+ string a("hello");
+ int i = countChar(a, 'l');
+],lyx_cv_std_count=yes,lyx_cv_std_count=no)
+])
+if test $lyx_cv_std_count = yes ; then
+ AC_DEFINE(HAVE_STD_COUNT, 1,
+ [Define if you have a conforming std::count template, otherwise HP version of count template is assumed.])
+fi])
+
+
dnl Usage: LYX_CXX_STL_MODERN_STREAMS : checks whether the C++ compiler
dnl supports modern STL streams
AC_DEFUN(LYX_CXX_STL_MODERN_STREAMS,[
AC_CACHE_CHECK(for modern STL streams,lyx_cv_modern_streams,
[AC_TRY_COMPILE([
-#include <fstream>
+#include <iostream>
],[
std::streambuf * test = std::cerr.rdbuf();
test->pubsync();
AC_DEFUN(LYX_CXX_STL_STRING,[
AC_REQUIRE([LYX_PROG_CXX])
AC_MSG_CHECKING(whether the included std::string should be used)
- AC_ARG_WITH(included-string,[
- --with-included-string use LyX string class instead of STL string
- ],[
- with_included_string=$withval
- ],[
- AC_TRY_COMPILE([
+ AC_ARG_WITH(included-string,
+ [ --with-included-string use LyX string class instead of STL string],
+ [with_included_string=$withval],
+ [AC_TRY_COMPILE([
#include <string>
using std::string;
],[
string a("hello there");
- a.clear();
+ a.erase();
a = "hey";
+ char s[] = "y";
+ int t = a.compare(a.length() - 1, 1, s);
a.erase();
],[
with_included_string=no
])
+dnl Usage: LYX_REGEX : checks if the header regex.h is available
+dnl if it is not available the automake variable USE_REGEX will be
+dnl defined and the regex.h and regex.c that we provide will be used.
+AC_DEFUN(LYX_REGEX,[
+ AC_CHECK_HEADERS(regex.h, lyx_regex=no, lyx_regex=yes)
+ AM_CONDITIONAL(USE_REGEX, test x$lyx_regex = xyes)
+])
+
+
dnl LYX_CXX_MUTABLE
AC_DEFUN(LYX_CXX_MUTABLE, [
AC_REQUIRE([LYX_PROG_CXX])
AC_DEFUN(LYX_CXX_NAMESPACES,[
AC_CACHE_CHECK(for correct namespaces support,lyx_cv_cxx_namespace,
[AC_TRY_COMPILE([
- #include <vector>
- using std::vector;
+ namespace foo {
+ int bar;
+ }
],[
- vector<int> test;
+ foo::bar = 0;
return 0;
],lyx_cv_cxx_namespace=yes,lyx_cv_cxx_namespace=no)
])
sed -e 's/^"%%%"\(.*\)"%%%"/\1/' -e 's/ //g'`
rm -f conftest*])
case "$lyx_cv_xfversion" in
- "(unknown)"|0.82|0.83|0.84|0.85)
- LYX_ERROR(dnl
+ "(unknown)"|0.8[1-7])
+ LYX_ERROR(dnl
Version $lyx_cv_xfversion of xforms is not compatible with LyX.
- This version of LyX works best with version 0.88[,] although it
- supports also versions 0.81[,] 0.86 and 0.87.) ;;
- 0.81|0.86|0.87)
- LYX_WARNING(dnl
-While LyX is compatible with version $lyx_cv_xfversion of xforms[,]
- it is recommended that you upgrade to version 0.88.) ;;
- 0.88) ;;
- 0.89) LYX_WARNING(dnl
+ This version of LyX works best with versions 0.88 (recommended) and later.) ;;
+ 0.88) ;;
+ 0.89) LYX_WARNING(dnl
LyX should work ok with version $lyx_cv_xfversion of xforms[,] but
it is an unproven version and might still have some bugs. If you
have problems[,] please use version 0.88 instead.) ;;
- *) LYX_WARNING(dnl
+ *) LYX_WARNING(dnl
Version $lyx_cv_xfversion of xforms might not be compatible with LyX[,]
- since it is newer than 0.88. You might have slight problems with it.);;
+ since it is newer than 0.88. You might have slight problems with it.);;
esac
fi])
test "x$GXX" = xyes && lyx_broken_headers=yes
fi])
+dnl Usage: LYX_FUNC_PUTENV_ARGTYPE
+dnl Checks whether putenv() takes 'char const *' or 'char *' as
+dnl argument. This is needed because Solaris 7 (wrongly?) uses 'char *',
+dnl while everybody else uses the former...
+AC_DEFUN(LYX_FUNC_PUTENV_ARGTYPE,
+[AC_MSG_CHECKING([type of argument for putenv()])
+ AC_CACHE_VAL(lyx_cv_func_putenv_arg,dnl
+ [AC_TRY_COMPILE(dnl
+[#include <cstdlib>],
+[char const * foo = "bar";
+ putenv(foo);],dnl
+ [lyx_cv_func_putenv_arg='char const *'],[lyx_cv_func_putenv_arg='char *'])])
+ AC_MSG_RESULT($lyx_cv_func_putenv_arg)
+ AC_DEFINE_UNQUOTED(PUTENV_TYPE_ARG,$lyx_cv_func_putenv_arg,dnl
+ [Define to the type of the argument of putenv(). Needed on Solaris 7.])])
+
dnl Usage: LYX_WITH_DIR(dir-name,desc,dir-var-name,default-value,
dnl [default-yes-value])
dnl Adds a --with-'dir-name' option (described by 'desc') and puts the
dnl resulting directory name in 'dir-var-name'.
AC_DEFUN(LYX_WITH_DIR,[
- AC_ARG_WITH($1,[ --with-$1 specify $2])
+ AC_ARG_WITH($1,[ --with-$1 specify $2])
AC_MSG_CHECKING([for $2])
if test -z "$with_$3"; then
AC_CACHE_VAL(lyx_cv_$3, lyx_cv_$3=$4)
dnl var-name.
AC_DEFUN(LYX_ADD_INC_DIR,[$1="${$1} -I$2 "])
+### Check for a headers existence and location iff it exists
+## This is supposed to be a generalised version of LYX_STL_STRING_FWD
+## It almost works. I've tried a few variations but they give errors
+## of one sort or other: bad substitution or file not found etc. The
+## actual header _is_ found though and the cache variable is set however
+## the reported setting (on screen) is equal to $ac_safe for some unknown
+## reason.
+AC_DEFUN(LYX_PATH_HEADER,
+[ AC_CHECK_HEADER($1,[
+ ac_tr_safe=PATH_`echo $ac_safe | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ AC_CACHE_CHECK([path to $1],lyx_cv_path_$ac_safe,
+ [ cat > conftest.$ac_ext <<EOF
+#line __oline__ "configure"
+#include "confdefs.h"
+
+#include <$1>
+EOF
+lyx_cv_path_$ac_safe=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \
+ grep $1 2>/dev/null | \
+ sed -e 's/.*\(".*$1"\).*/\1/' -e "1q"`
+rm -f conftest*])
+ AC_DEFINE_UNQUOTED(${ac_tr_safe},${lyx_cv_path_$ac_safe})])
+])
+### end of LYX_PATH_HEADER
+
+### Check for stl_string_fwd.h existence and location if it exists
+AC_DEFUN(LYX_STL_STRING_FWD,
+[ AC_CHECK_HEADER(stl_string_fwd.h,[
+ AC_CACHE_CHECK([path to stl_string_fwd.h],lyx_cv_path_stl_string_fwd_h,
+ [ cat > conftest.$ac_ext <<EOF
+#line __oline__ "configure"
+#include "confdefs.h"
+
+#include <stl_string_fwd.h>
+EOF
+lyx_cv_path_stl_string_fwd_h=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | \
+ grep 'stl_string_fwd.h' 2>/dev/null | \
+ sed -e 's/.*\(".*stl_string_fwd.h"\).*/\1/' -e "1q"`
+rm -f conftest*])
+ AC_DEFINE_UNQUOTED(STL_STRING_FWD_H_LOCATION,$lyx_cv_path_stl_string_fwd_h,
+[define this to the location of stl_string_fwd.h to be used with #include,
+ NOTE: Do not set it to <stl_string_fwd.h> as that will find the LyX
+ supplied version of the header.
+ e.g. <../include/stl_string_fwd.h> or better yet use an absolute path])])
+])
+
dnl AC_VALIDATE_CACHE_SYSTEM_TYPE[(cmd)]
dnl if the cache file is inconsistent with the current host,
ac_cv_target_system_type="$target"
])
-
dnl We use this until autoconf fixes its version.
AC_DEFUN(LYX_FUNC_SELECT_ARGTYPES,
[AC_MSG_CHECKING([types of arguments for select()])
AC_DEFINE_UNQUOTED(SELECT_TYPE_ARG5,($ac_cv_func_select_arg5))
])
-dnl This is taken from gettext.m4, but a bug has been fixed
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 5
-
-AC_DEFUN(LYX_GNU_GETTEXT,
- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_PROG_RANLIB])dnl
- AC_REQUIRE([AC_ISC_POSIX])dnl
- AC_REQUIRE([AC_HEADER_STDC])dnl
- AC_REQUIRE([AC_C_CONST])dnl
- AC_REQUIRE([AC_C_INLINE])dnl
- AC_REQUIRE([AC_TYPE_OFF_T])dnl
- AC_REQUIRE([AC_TYPE_SIZE_T])dnl
- AC_REQUIRE([AC_FUNC_ALLOCA])dnl
- AC_REQUIRE([AC_FUNC_MMAP])dnl
-
- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h sys/param.h])
- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-strdup __argz_count __argz_stringify __argz_next])
-
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
- AC_CHECK_FUNCS(stpcpy)
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
- AC_DEFINE(HAVE_STPCPY)
- fi
-
- AM_LC_MESSAGES
- AM_WITH_NLS
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
- AC_MSG_CHECKING(for catalogs to be installed)
- NEW_LINGUAS=
-dnl =============Fix is here !===============================
-dnl Some sh do not like substituation in bounds of for loops
-dnl for lang in ${LINGUAS=$ALL_LINGUAS}; do
- tmplinguas=${LINGUAS=$ALL_LINGUAS}
- for lang in ${tmplinguas}; do
-dnl =========================================================
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
- AC_MSG_RESULT($LINGUAS)
- fi
-
- dnl Construct list of names of catalog files to be constructed.
- if test -n "$LINGUAS"; then
- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
- fi
- fi
-
- dnl The reference to <locale.h> in the installed <libintl.h> file
- dnl must be resolved because we cannot expect the users of this
- dnl to define HAVE_LOCALE_H.
- if test $ac_cv_header_locale_h = yes; then
- INCLUDE_LOCALE_H="#include <locale.h>"
- else
- INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>. Take care yourself. */"
- fi
- AC_SUBST(INCLUDE_LOCALE_H)
-
- dnl Determine which catalog format we have (if any is needed)
- dnl For now we know about two different formats:
- dnl Linux libc-5 and the normal X/Open format
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
- dnl Transform the SED scripts while copying because some dumb SEDs
- dnl cannot handle comments.
- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
- fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
- dnl In the intl/Makefile.in we have a special dependency which makes
- dnl only sense for gettext. We comment this out for non-gettext
- dnl packages.
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
- AC_SUBST(GT_NO)
- AC_SUBST(GT_YES)
-
- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
- dnl Try to locate is.
- MKINSTALLDIRS=
- if test -n "$ac_aux_dir"; then
- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
- fi
- if test -z "$MKINSTALLDIRS"; then
- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
- fi
- AC_SUBST(MKINSTALLDIRS)
-
- dnl *** For now the libtool support in intl/Makefile is not for real.
- l=
- AC_SUBST(l)
-
- dnl Generate list of files to be processed by xgettext which will
- dnl be included in po/Makefile.
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
- fi
- rm -f po/POTFILES
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
- ])
-
## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
## Copyright (C) 1996-1999 Free Software Foundation, Inc.
## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
-#
-# the following will cause an existing older ltconfig to fail, so
-# we ignore this at the expense of the cache file... Checking this
-# will just take longer ... bummer!
-#libtool_flags="--cache-file=$cache_file"
-#
+libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
AC_PROG_LD_GNU
])
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
-case "$host" in
+case "$lt_target" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 5
+
+AC_DEFUN(AM_WITH_NLS,
+ [AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+
+ USE_INCLUDED_LIBINTL=no
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ AC_DEFINE(ENABLE_NLS)
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If gettext or catgets are available (in this order) we
+ dnl use this. Else we have to fall back to GNU NLS library.
+ dnl catgets is only used if permitted by option --with-catgets.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+ CATOBJEXT=NONE
+
+ AC_CHECK_HEADER(libintl.h,
+ [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
+ gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
+
+ if test "$gt_cv_func_gettext_libc" != "yes"; then
+ AC_CHECK_LIB(intl, bindtextdomain,
+ [AC_CACHE_CHECK([for gettext in libintl],
+ gt_cv_func_gettext_libintl,
+ [AC_CHECK_LIB(intl, gettext,
+dnl ============== A fix is here! ======================
+dnl -lintl was not added to the LIBS variable in this case
+ [gt_cv_func_gettext_libintl=yes
+ INTLLIBS="-lintl"],
+dnl ==== end of fix
+ gt_cv_func_gettext_libintl=no)],
+ gt_cv_func_gettext_libintl=no)])
+ fi
+
+ if test "$gt_cv_func_gettext_libc" = "yes" \
+ || test "$gt_cv_func_gettext_libintl" = "yes"; then
+ AC_DEFINE(HAVE_GETTEXT)
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+ if test "$MSGFMT" != "no"; then
+ AC_CHECK_FUNCS(dcgettext)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr],
+ [CATOBJEXT=.gmo
+ DATADIRNAME=share],
+ [CATOBJEXT=.mo
+ DATADIRNAME=lib])
+ INSTOBJEXT=.mo
+ fi
+ fi
+ ])
+
+ if test "$CATOBJEXT" = "NONE"; then
+ AC_MSG_CHECKING([whether catgets can be used])
+ AC_ARG_WITH(catgets,
+ [ --with-catgets use catgets functions if available],
+ nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
+ AC_MSG_RESULT($nls_cv_use_catgets)
+
+ if test "$nls_cv_use_catgets" = "yes"; then
+ dnl No gettext in C library. Try catgets next.
+ AC_CHECK_LIB(i, main)
+ AC_CHECK_FUNC(catgets,
+ [AC_DEFINE(HAVE_CATGETS)
+ INTLOBJS="\$(CATOBJS)"
+ AC_PATH_PROG(GENCAT, gencat, no)dnl
+ if test "$GENCAT" != "no"; then
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
+ if test "$GMSGFMT" = "no"; then
+ AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
+ fi
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ USE_INCLUDED_LIBINTL=yes
+ CATOBJEXT=.cat
+ INSTOBJEXT=.cat
+ DATADIRNAME=lib
+ INTLDEPS='$(top_builddir)/intl/libintl.a'
+ INTLLIBS=$INTLDEPS
+ LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+ nls_cv_header_intl=intl/libintl.h
+ nls_cv_header_libgt=intl/libgettext.h
+ fi])
+ fi
+ fi
+
+ if test "$CATOBJEXT" = "NONE"; then
+ dnl Neither gettext nor catgets in included in the C library.
+ dnl Fall back on GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ INTLOBJS="\$(GETTOBJS)"
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ AC_SUBST(MSGFMT)
+ USE_INCLUDED_LIBINTL=yes
+ CATOBJEXT=.gmo
+ INSTOBJEXT=.mo
+ DATADIRNAME=share
+ INTLDEPS='$(top_builddir)/intl/libintl.a'
+ INTLLIBS=$INTLDEPS
+ LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+ nls_cv_header_intl=intl/libintl.h
+ nls_cv_header_libgt=intl/libgettext.h
+ fi
+
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext program is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ fi
+
+ # We need to process the po/ directory.
+ POSUB=po
+ else
+ DATADIRNAME=share
+ nls_cv_header_intl=intl/libintl.h
+ nls_cv_header_libgt=intl/libgettext.h
+ fi
+ AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
+ AC_OUTPUT_COMMANDS(
+ [case "$CONFIG_FILES" in *po/Makefile.in*)
+ sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
+ esac])
+
+
+ # If this is used in GNU gettext we have to set USE_NLS to `yes'
+ # because some of the sources are only built for this goal.
+ if test "$PACKAGE" = gettext; then
+ USE_NLS=yes
+ USE_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl These rules are solely for the distribution goal. While doing this
+ dnl we only have to keep exactly one list of the available catalogs
+ dnl in configure.in.
+ for lang in $ALL_LINGUAS; do
+ GMOFILES="$GMOFILES $lang.gmo"
+ POFILES="$POFILES $lang.po"
+ done
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATALOGS)
+ AC_SUBST(CATOBJEXT)
+ AC_SUBST(DATADIRNAME)
+ AC_SUBST(GMOFILES)
+ AC_SUBST(INSTOBJEXT)
+ AC_SUBST(INTLDEPS)
+ AC_SUBST(INTLLIBS)
+ AC_SUBST(INTLOBJS)
+ AC_SUBST(POFILES)
+ AC_SUBST(POSUB)
+ ])
+
+AC_DEFUN(AM_GNU_GETTEXT,
+ [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_ISC_POSIX])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_C_CONST])dnl
+ AC_REQUIRE([AC_C_INLINE])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h sys/param.h])
+ AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+strdup __argz_count __argz_stringify __argz_next])
+
+ if test "${ac_cv_func_stpcpy+set}" != "set"; then
+ AC_CHECK_FUNCS(stpcpy)
+ fi
+ if test "${ac_cv_func_stpcpy}" = "yes"; then
+ AC_DEFINE(HAVE_STPCPY)
+ fi
+
+ AM_LC_MESSAGES
+ AM_WITH_NLS
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ AC_MSG_CHECKING(for catalogs to be installed)
+ NEW_LINGUAS=
+dnl ============== Fix is here! ======================
+dnl Some sh do not like substitution in bounds of for loops
+dnl for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ tmplinguas=${LINGUAS=$ALL_LINGUAS}
+ for lang in ${tmplinguas}; do
+dnl ==== end of fix
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ AC_MSG_RESULT($LINGUAS)
+ fi
+
+ dnl Construct list of names of catalog files to be constructed.
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ dnl The reference to <locale.h> in the installed <libintl.h> file
+ dnl must be resolved because we cannot expect the users of this
+ dnl to define HAVE_LOCALE_H.
+ if test $ac_cv_header_locale_h = yes; then
+ INCLUDE_LOCALE_H="#include <locale.h>"
+ else
+ INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>. Take care yourself. */"
+ fi
+ AC_SUBST(INCLUDE_LOCALE_H)
+
+ dnl Determine which catalog format we have (if any is needed)
+ dnl For now we know about two different formats:
+ dnl Linux libc-5 and the normal X/Open format
+ test -d intl || mkdir intl
+ if test "$CATOBJEXT" = ".cat"; then
+ AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
+
+ dnl Transform the SED scripts while copying because some dumb SEDs
+ dnl cannot handle comments.
+ sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
+ fi
+ dnl po2tbl.sed is always needed.
+ sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+ $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
+
+ dnl In the intl/Makefile.in we have a special dependency which makes
+ dnl only sense for gettext. We comment this out for non-gettext
+ dnl packages.
+ if test "$PACKAGE" = "gettext"; then
+ GT_NO="#NO#"
+ GT_YES=
+ else
+ GT_NO=
+ GT_YES="#YES#"
+ fi
+ AC_SUBST(GT_NO)
+ AC_SUBST(GT_YES)
+
+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+ dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
+ dnl Try to locate is.
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
+ AC_SUBST(MKINSTALLDIRS)
+
+ dnl *** For now the libtool support in intl/Makefile is not for real.
+ l=
+ AC_SUBST(l)
+
+ dnl Generate list of files to be processed by xgettext which will
+ dnl be included in po/Makefile.
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
+ ])
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+ [if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES)
+ fi
+ fi])
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
projects / lyx.git / blobdiff