These four steps will compile, test and install LyX:
- 0) Linux users beware: if compiling the Qt frontend, you need
- qt4 and qt4-devel packages of the same version to compile LyX.
+ 0) Linux users beware: You need qt4 and qt4-devel packages
+ of the same version to compile LyX.
- 1) ./configure
- configures LyX according to your system.
- When compiling for Qt, you may have to set
- --with-qt4-dir=<path-to-your-qt4-installation>
- if the environment variable QTDIR is not set.
+ In general, it is also recommended to have pkg-config
+ installed (the name might vary depending on your
+ distribution).
+
+ 1) ./configure configures LyX according to your system. You
+ may have to set --with-qt4-dir=<path-to-your-qt4-installation>
+ (for example, "--with-qt4-dir=/usr/share/qt4/") if the
+ environment variable QTDIR is not set and pkg-config is not
+ available.
+
+ See Note below if ./configure script is not present.
2) make
compiles the program.
if you want a smaller binary.
-Note for Subversion checkouts
+Note for Git checkouts
-----------------------------
-If you have checked this out from Subversion, you need to have:
-* automake >= 1.5
-* autoconf >= 2.52
-* gettext >= 0.12
+If you have checked this out from Git, you need to have:
+* automake >= 1.8
+* autoconf >= 2.59d
+* gettext >= 0.16.1
Then type "./autogen.sh" to build the needed configuration
-files and proceed as stated below.
+files and proceed as stated above/below.
You will also probably need GNU m4 (perhaps installed as gm4).
+
Requirements
------------
-First of all, you will also need a recent C++ compiler, where recent
-means that the compilers are close to C++ standard conforming (gcc 3.x).
+First of all, you will need a recent C++ compiler, where recent means
+that the compilers are close to C++ standard conforming (gcc 4.x).
-LyX 1.6.x makes great use of C++ Standard Template Library (STL).
+LyX makes great use of the C++ Standard Template Library (STL).
This means that gcc users will have to install the relevant libstdc++
library to be able to compile this version of LyX.
-LyX has been tested with Qt 4.2.x and Qt 4.3.x. The only special point
-to make is that you must ensure that both LyX and the Qt libraries are
-compiled with the same C++ compiler.
-
-Note that if Qt is using Xft2/fontconfig, you may need to install the
-latex-xft-fonts package (at ftp://ftp.lyx.org/pub/lyx/contrib/) to get
-maths symbols displayed properly. To find out, type:
-
- ldd `which lyx` | grep fontconfig
+For full LyX usability we suggest to use at least Qt 4.8 which has been
+widely tested. For compilation you need to compile against at least
+Qt 4.5.0. The only special point to make is that you must ensure that both
+LyX and the Qt libraries are compiled with the same C++ compiler.
-at the console. Most recent distributions are known to use fontconfig.
+To build LyX with spell checking capabilities included you have to
+install at least one of the development packages of the spell checker
+libraries. See the RELEASE-NOTES for details.
-If, however, your version of Qt does not use fontconfig, then TeX
-fonts should be added to the font path. 'man xset' is your friend.
* Other things to note
from:
ftp://ftp.gnu.org/gnu/gettext/
-To use the thesaurus, you will need to install libAikSaurus, available
-from:
- http://aiksaurus.sourceforge.net/
-
The two following programs should be available at configuration time:
o LaTeX2e should be correctly setup for the user you are logged in
as. Otherwise, LyX will not be able to run a number of tests. Note
that users can run these tests manually with Tools>Reconfigure.
- o Python 2.3 or newer installed to be able to import older LyX files
+ o Python 2.4 or newer must be installed. Python is used for many
+ simple tasks that are executed by external scripts, such as the
+ automatic configuration step and the import of older LyX documents
with the lyx2lyx script (this script is called automatically when
- opening a file).
+ opening a file). Python 3.0 or later is not supported.
Creating the Makefile
./configure
-For more complicated cases, LyX configure takes the following specific
+For more complicated cases, LyX configure honors the following specific
flags:
- o --enable-build-type=[rel(ease), dev(elopment), pre(release)]
- allows to tweak the compiled code. The options are equivalent to:
+ o --enable-build-type=[rel(ease), pre(release), dev(elopment), prof(iling), gprof]
+ allows to tweak the compiled code. The following table describes
+ the settings in terms of various options that are described later
- release: --enable-optimization=-O2 --disable-assertions
- --disable-stdlib-debug --disable-concept-checks
- --disable-warnings --disable-debug
+ release prerelease development profiling gprof
+ optimization -O2 -O2 -O -O2 -O2
+ assertions X X
+ stdlib-debug X
+ concept-checks X X
+ warnings X X
+ debug X X X X
+ gprof X
- prerelease: --enable-optimization=-O2 --enable-assertions
- --disable-stdlib-debug --enable-concept-checks
- --enable-warnings --enable-debug
-
- prerelease: --enable-optimization=-O --enable-assertions
- --enable-stdlib-debug --enable-concept-checks
- --enable-warnings --enable-debug
+ The defaults are as follows in terms of version number
+ release: stable release (1.x.y)
+ prerelease: version number contains alpha, beta, rc or pre.
+ development: version number contains dev.
o --with-extra-lib=DIRECTORY that specifies the path where LyX will
find extra libraries (qt4) it needs. Defaults to NONE
--with-extra-lib=DIRECTORY/lib --with-extra-inc=DIRECTORY/include
If DIRECTORY is not specified, the current prefix is used.
- o --with-version-suffix will install LyX as lyx-<version>, e.g. lyx-1.6.1
- The LyX data directory will be something like <whatever>/lyx-1.6.1/.
+ o --with-version-suffix[=SUFFIX] will install LyX as lyxSUFFIX. The
+ LyX data directory will be something like <whatever>/lyxSUFFIX/.
Additionally your user configuration files will be found in e.g.
- $HOME/.lyx-1.6.1
+ $HOME/.lyxSUFFIX. The default for SUFFIX is "-<currentversion>",
+ e.g. lyx-1.6.1.
You can use this feature to install more than one version of LyX
on the same system. You can optionally specify a "version" of your
own, by doing something like :
- ./configure --with-version-suffix=-latestsvn
+ ./configure --with-version-suffix=-latestdev
Note that the standard configure options --program-prefix,
--program-suffix and the others will not affect the shared LyX
LyX:
o --disable-nls suppresses all internationalization support,
- yielding a somewhat smaller code.
+ yielding somewhat smaller code.
o --with-included-gettext forces the use of the included GNU gettext
library, although you might have another one installed.
care.
o You can also set the environment variable LINGUAS to a list of
- language in case you do not want to install all the translation
+ languages in case you do not want to install all the translation
files. For example, if you are only interested in German and
Finnish, you can type (with sh or bash)
export LINGUAS='de fi'
surprises.
Note that the --with-extra-* commands are not really robust when it
-comes to use of relative paths. If you really want to use a relative path
+comes to using relative paths. If you really want to use a relative path
here, you can prepend it with "`pwd`/".
If you do not like the default compile flags used (-g -O2 on gcc), you can
o CXXFLAGS='-O2' (sh, bash)
o setenv CXXFLAGS '-O2' (csh, tcsh)
-Similarly, if you want to force the use of some specific compiler, you can
+Similarly, if you want to force the use of a specific compiler, you can
give a value to the CXX variable.
If you encounter problems, please read the section 'Problems' at the end of
this file.
-In particular, the following options could be useful in some desperate
-cases:
+The following options allow you to tweak the generated code more precisely:
+
+ o --enable-gprof instruments the code for use with the gprof
+ profiler. The results are only meaningful in conjunction with
+ --enable-build-type=release.
o --enable-optimization=VALUE enables you to set optimization to a
- higher level as the default (-O), for example --enable-optimization=-O3.
+ higher level than the default (-O), for example --enable-optimization=-O3.
o --disable-optimization - you can use this to disable compiler
optimization of LyX. The compile may be much quicker with some
want to use. The default value is qt4, which is the only available
frontend for now.
+ o --enable-monolithic-build[=boost,client,insets,mathed,core,tex2lyx,frontend-qt4]
+ that enables monolithic build of the given parts of the source
+ code. This should reduce the compilation time provided you have
+ enough memory (>500MB).
+
Compiling and installing LyX
----------------------------
If configure fails for some strange reason
------------------------------------------
-Even when configure fails, it creates a Makefile. You always can check
+Even when configure fails, it creates a Makefile. You can always check
the contents of this file, modify it and run 'make'.
Compiling For Multiple Architectures
architecture, use `make distclean' before reconfiguring for another
architecture.
-Preparing a binary distribution for the use of others
-------------------------------------------------------
-
- o Compile LyX with the right compiler switches for your
- architecture. Make sure you use the --without-latex-config switch
- of configure, since others might not be interested by your
- configuration :-)
-
- o Create a file README.bin describing your distribution and
- referring to *you* if problems arise. As a model, you can use the
- file development/tools/README.bin.example, which can be a good
- starting point.
-
- o Type `make bindist'. This will create a file
- lyx-1.xx.yy-bin.tar.gz. Rename it to reflect you architecture
- and the peculiarities of your build (e.g. static vs. dynamic).
-
- o Check that everything is correct by unpacking the distribution
- in some private place and running it. In particular, check the
- output of `ldd lyx' to know which libraries are really needed.
-
- o Upload your binary file to ftp.devel.lyx.org:/pub/incoming, and
- notify larsbj@lyx.org.
-
-
Problems
--------
This section provides several hints that have been submitted by LyX
-team member or users to help compiling on some particular
-architectures. If you find that some of this hints are wrong, please
+team members or users to help compiling on some particular
+architectures. If you find that some of these hints are wrong, please
notify us.
o On SUN Sparc Solaris, you need gnumake. The LyX makefiles do not
work with Solaris make.
- The Solaris ar seg-faults trying to build the insets library. You
+ The Solaris 8 ar seg-faults trying to build the insets library. You
will need to use the ar from the GNU binutils for this subdirectory.
+ There is no problem with the Solaris 9 and 10 ar.
+
+ Qt4 uses the Xrender X11 extension for antialiased fonts. This
+ extension was added to Xsun starting from the Solaris 10 8/07
+ release, but it is not activated by default. To activate it, you
+ must issue (as root) the following command:
+ svccfg -s svc:/application/x11/x11-server setprop options/server_args=+xrender
+ and then restart the X server.
+
+ There is a problem with the fontconfig library shipped with
+ Solaris 10 8/07 causing a seg-fault when it is used by Qt4.
+ Until this is fixed, a workaround is replacing the shared library
+ /usr/lib/libfontconfig.so.1 with a copy from a previous release or
+ installing a new version of fontconfig from http://www.sunfreeware.com/
+
+ On Solaris, the default fontconfig configuration gives preference
+ to bitmap fonts at (not so small) sizes. As bitmapped fonts are not
+ antialiased, you may prefer changing this configuration. This may be
+ done by adding the following stanza
+
+ <match target="pattern">
+ <edit name="prefer_bitmap">
+ <bool>false</bool>
+ </edit>
+ </match>
+
+ to either ~/.fonts.conf (for a per-user change) or /etc/fonts/local.conf
+ (for a global system change). The stanza should be added between the
+ <fontconfig> and </fontconfig> tags. If neither ~/.fonts.conf nor
+ /etc/fonts/local.conf exists, you can create them with the following
+ content:
+
+ <?xml version="1.0"?>
+ <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
+ <fontconfig>
+ <match target="pattern">
+ <edit name="prefer_bitmap">
+ <bool>false</bool>
+ </edit>
+ </match>
+ </fontconfig>
projects / lyx.git / blobdiff