These four steps will compile, test and install LyX:
- 0) Linux users beware: if compiling the Qt frontend, you need
- qt and qt-devel packages of the same version to compile LyX.
+ 0) Linux users beware: You need qt4 and qt4-devel packages
+ of the same version to compile LyX.
- 1) ./configure --with-frontend=qt4
+ 1) ./configure
configures LyX according to your system.
- When compiling for Qt, you may have to set
- --with-qt-dir=<path-to-your-qt-installation>
- if the environment variable QTDIR is not set.
+ You may have to set
+ --with-qt4-dir=<path-to-your-qt4-installation>
+ if the environment variable QTDIR is not set (for example,
+ '--with-qt4-dir=/usr/share/qt4/'). Alternatively, you could
+ install pkgconfig (the name might vary depending on your
+ distribution).
+ See Note below if ./configure script is not present.
2) make
compiles the program.
if you want a smaller binary.
-Note for Subversion checkouts
+Note for Subversion (SVN) checkouts
-----------------------------
If you have checked this out from Subversion, you need to have:
-* automake >= 1.9
-* autoconf >= 2.52
+* automake >= 1.8
+* autoconf >= 2.59c
* gettext >= 0.12
Then type "./autogen.sh" to build the needed configuration
files and proceed as stated below.
You will also probably need GNU m4 (perhaps installed as gm4).
+
Requirements
------------
First of all, you will also need a recent C++ compiler, where recent
-means that the compilers are close to C++ standard conforming.
-Compilers that are known to compile LyX are gcc 2.95.x and later
-and Digital C++ version 6.1 and later. Please tell us your experience
-with other compilers.
-
-It is _not_ possible to compile LyX with gcc 2.7.x and 2.8.x.
+means that the compilers are close to C++ standard conforming (gcc 4.x).
-LyX 1.4.x makes great use of C++ Standard Template Library (STL).
+LyX makes great use of C++ Standard Template Library (STL).
This means that gcc users will have to install the relevant libstdc++
-library to be able to compile this version of LyX. Users of gcc 2.95.x
-will have to install the STLPort version of these libraries as the
-ones that come with gcc 2.95.x are too broken for us to use.
-
-* Qt frontend
+library to be able to compile this version of LyX.
-LyX has been tested with Qt 3.x and 4.x. The only special point to
-make is that you must ensure that both LyX and the Qt libraries are
-compiled with the same C++ compiler.
+For full LyX usability we suggest to use at least Qt 4.6 which has been
+widely tested. For compilation you need to compile against at least
+Qt 4.2.2. The only special point to make is that you must ensure that both
+LyX and the Qt libraries are compiled with the same C++ compiler.
Note that if Qt is using Xft2/fontconfig, you may need to install the
latex-xft-fonts package (at ftp://ftp.lyx.org/pub/lyx/contrib/) to get
ldd `which lyx` | grep fontconfig
-at the console. Both RH8 and Debian unstable distributions are known
-to use fontconfig.
+at the console. Most recent distributions are known to use fontconfig.
If, however, your version of Qt does not use fontconfig, then TeX
fonts should be added to the font path. 'man xset' is your friend.
+To build LyX with spell checking capabilities included you have to
+install at least one of the development packages of the spell checker
+libraries. See the RELEASE-NOTES for details.
+
+
* Other things to note
If you make modifications to files in src/ (for example by applying a
from:
ftp://ftp.gnu.org/gnu/gettext/
-To use the thesaurus, you will need to install libAikSaurus, available
-from:
- http://aiksaurus.sourceforge.net/
-
The two following programs should be available at configuration time:
o LaTeX2e should be correctly setup for the user you are logged in
as. Otherwise, LyX will not be able to run a number of tests. Note
- that users can run these tests manually with Edit>Reconfigure.
+ that users can run these tests manually with Tools>Reconfigure.
o Python 2.3 or newer installed to be able to import older LyX files
with the lyx2lyx script (this script is called automatically when
- opening a file).
+ opening a file). Python 3.0 or later is not supported.
Creating the Makefile
For more complicated cases, LyX configure takes the following specific
flags:
- o --with-frontend=FRONTEND that allows to specify which frontend you
- want to use. There is no default value: this switch is required.
+ o --enable-build-type=[rel(ease), dev(elopment), pre(release)]
+ allows to tweak the compiled code. The following table describes
+ the settings in terms of various options that are described later
+
+ release prerelease development
+ optimization -O2 -O2 -O
+ assertions X X
+ stdlib-debug X
+ concept-checks X X
+ warnings X X
+ debug X X
+
+ The default are as follows in terms of version number
+ release: stable release (1.x.y)
+ prerelease: version number contains alpha, beta, rc or pre.
+ development: version number contains svn.
o --with-extra-lib=DIRECTORY that specifies the path where LyX will
find extra libraries (qt4) it needs. Defaults to NONE
--with-extra-lib=DIRECTORY/lib --with-extra-inc=DIRECTORY/include
If DIRECTORY is not specified, the current prefix is used.
- o --with-version-suffix will install LyX as lyx-<version>, e.g. lyx-1.4.1
- The LyX data directory will be something like <whatever>/lyx-1.4.1/.
+ o --with-version-suffix[=SUFFIX] will install LyX as lyxSUFFIX. The
+ LyX data directory will be something like <whatever>/lyxSUFFIX/.
Additionally your user configuration files will be found in e.g.
- $HOME/.lyx-1.4.1
+ $HOME/.lyxSUFFIX. The default for SUFFIX is "-<currentversion>",
+ e.g. lyx-1.6.1.
You can use this feature to install more than one version of LyX
on the same system. You can optionally specify a "version" of your
directory etc. so it is recommended that you use --with-version-suffix
(or --prefix) instead.
- o --enable-optimization=VALUE enables you to set optimization to a
- higher level as the default (-O), for example --enable-optimization=-O3.
-
- o --disable-optimization - you can use this to disable compiler
- optimization of LyX. The compile may be much quicker with some
- compilers, but LyX will run more slowly.
-
There are also flags to control the internationalization support in
LyX:
installation. [defaults to /usr/local]
o --datadir=DIRECTORY gives the directory where all extra LyX
- files (lyxrc example, documentation, templates and layouts
- definitions) will be installed.
+ files (documentation, templates and layout definitions)
+ will be installed.
[defaults to ${prefix}/share/lyx${program_suffix}]
o --bindir=DIRECTORY gives the directory where the lyx binary
If you encounter problems, please read the section 'Problems' at the end of
this file.
-In particular, the following options could be useful in some desperate
-cases:
+The following options allow to tweak more precisely the generated code:
+
+ o --enable-gprof instruments the code for use with the gprof
+ profiler. The result are only meaningful in conjunction with
+ --enable-build-type=release.
+
+ o --enable-optimization=VALUE enables you to set optimization to a
+ higher level as the default (-O), for example --enable-optimization=-O3.
+
+ o --disable-optimization - you can use this to disable compiler
+ optimization of LyX. The compile may be much quicker with some
+ compilers, but LyX will run more slowly.
o --enable-debug will add debug information to your binary. This
requires a lot more disk space, but is a must if you want to try to
latex cannot be found. If you find that you have to use this
flag, please report it as a bug.
+ o --with-frontend=FRONTEND that allows to specify which frontend you
+ want to use. The default value is qt4, which is the only available
+ frontend for now.
+
+ o --enable-monolithic-build[=boost,client,insets,mathed,core,tex2lyx,frontend-qt4]
+ that enables monolithic build of the given parts of the source
+ code. This should reduce the compilation time provided you have
+ enough memory (>500MB).
+
Compiling and installing LyX
----------------------------
make install-strip
-BTW: in the images subdirectory there is also a small icon "lyx.xpm",
+BTW: in the images subdirectory there is also a small icon "lyx.png",
that can be used to display lyx-documents in filemanagers.
If configure fails for some strange reason
architecture, use `make distclean' before reconfiguring for another
architecture.
-Preparing a binary distribution for the use of others
-------------------------------------------------------
-
- o Compile LyX with the right compiler switches for your
- architecture. Make sure you use the --without-latex-config switch
- of configure, since others might not be interested by your
- configuration :-)
-
- o Create a file README.bin describing your distribution and
- referring to *you* if problems arise. As a model, you can use the
- file development/tools/README.bin.example, which can be a good
- starting point.
-
- o Type `make bindist'. This will create a file
- lyx-1.xx.yy-bin.tar.gz. Rename it to reflect you architecture
- and the peculiarities of your build (e.g. static vs. dynamic).
-
- o Check that everything is correct by unpacking the distribution
- in some private place and running it. In particular, check the
- output of `ldd lyx' to know which libraries are really needed.
-
- o Upload your binary file to ftp.devel.lyx.org:/pub/incoming, and
- notify larsbj@lyx.org.
-
-
Problems
--------
architectures. If you find that some of this hints are wrong, please
notify us.
- o On SUN Sparc Solaris 8, you need gnumake. The LyX makefiles do not
+ o On SUN Sparc Solaris, you need gnumake. The LyX makefiles do not
work with Solaris make.
- The Solaris ar seg-faults trying to build the insets library. You
+ The Solaris 8 ar seg-faults trying to build the insets library. You
will need to use the ar from the GNU binutils for this subdirectory.
+ There is no problem with the Solaris 9 and 10 ar.
+
+ Qt4 uses the Xrender X11 extension for antialiased fonts. This
+ extension was added to Xsun starting from the Solaris 10 8/07
+ release, but it is not activated by default. To activate it, you
+ must issue (as root) the following command:
+ svccfg -s svc:/application/x11/x11-server setprop options/server_args=+xrender
+ and then restart the X server.
+
+ There is a problem with the fontconfig library shipped with
+ Solaris 10 8/07 causing a seg-fault when it is used by Qt4.
+ Until this is fixed, a workaround is replacing the shared library
+ /usr/lib/libfontconfig.so.1 with a copy from a previous release or
+ installing a new version of fontconfig from http://www.sunfreeware.com/
+
+ On Solaris, the default fontconfig configuration gives preference
+ to bitmap fonts at (not so small) sizes. As bitmapped fonts are not
+ antialiased, you may prefer changing this configuration. This may be
+ done by adding the following stanza
+
+ <match target="pattern">
+ <edit name="prefer_bitmap">
+ <bool>false</bool>
+ </edit>
+ </match>
+
+ to either ~/.fonts.conf (for a per-user change) or /etc/fonts/local.conf
+ (for a global system change). The stanza should be added between the
+ <fontconfig> and </fontconfig> tags. If neither ~/.fonts.conf nor
+ /etc/fonts/local.conf exist, you can create them with the following
+ content:
+
+ <?xml version="1.0"?>
+ <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
+ <fontconfig>
+ <match target="pattern">
+ <edit name="prefer_bitmap">
+ <bool>false</bool>
+ </edit>
+ </match>
+ </fontconfig>
- o LyX can be compiled on Tru64 Unix with either GNU's gcc or the default
- Compaq cxx compiler.
-
- There are no Alpha-specific problems with gcc.
-
- The following notes all refer to compilation with the Compaq cxx compiler.
-
- LyX cannot be compiled on Tru64 Unix 4.0d or 4.0e with the default cxx
- compiler. You should upgrade to at least cxx V6.2, to be found at
- ftp::/ftp.compaq.com/pub/products/C-CXX/tru64/cxx/CXX622V40.tar. Users
- running Tru64 Unix 4.0f and greater should have no real problems compiling
- LyX.
-
- cxx V6.2 will compile LyX out of the box.
- cxx V6.3-020 is also known to work, although there is a bug in
- /usr/include/cxx/deque that will break compilation in FormPreferences.C.
- Compaq are investigating, but a patch that works /now/ is:
-
---- /usr/include/cxx/deque_safe Mon Mar 4 21:09:50 2002
-+++ /usr/include/cxx/deque Mon Mar 4 21:09:00 2002
-@@ -570,9 +570,11 @@
- {
- if (size() >= x.size())
- erase(copy(x.begin(), x.end(), begin()), end());
-- else
-- copy(x.begin() + size(), x.end(),
-- inserter(*this,copy(x.begin(),x.begin()+size(),begin())));
-+ else {
-+ const_iterator mid = x.begin() + difference_type(size());
-+ copy(x.begin(), mid, begin());
-+ insert(end(), mid, x.end());
-+ }
- }
- return *this;
- }
-
- At the time of writing, cxx V6.5-026 is the latest cxx compiler. It is
- /not/ recommended. The compiler itself appears to be both buggy and
- extremely bloated (trebling the size of the stripped LyX binary).
-
- In order to compile LyX with the cxx compiler, you should run configure
- with the following flags:
- CXX='cxx -std strict_ansi'
- CXXFLAGS='-nopure_cname -nocleanup -ptr /tmp/lyx_cxx_repository -O2'
- CC='cc -std1'
- The -nopure_cname flag is needed for compilers V6.3 and above because
- LyX makes use of functions like popen, pclose that are defined in the
- c version of <stdio.h> but are not formally part of any c/c++ standard.
- They are not, therefore, included in the <cstdio> header file.