These four steps will compile, test and install LyX:
+ 0) Linux users beware: if compiling the Qt frontend, you need
+ qt4 and qt4-devel packages of the same version to compile LyX.
+
1) ./configure
- configures LyX to your system.
+ configures LyX according to your system.
+ When compiling for Qt, you may have to set
+ --with-qt4-dir=<path-to-your-qt4-installation>
+ if the environment variable QTDIR is not set.
2) make
compiles the program.
4) make install
will install it. You can use "make install-strip" instead
- if you want a smaller binary.
+ if you want a smaller binary.
-Note for CVS checkouts
-----------------------
+Note for Subversion checkouts
+-----------------------------
-If you have checked this out from CVS, you need to have
-automake, autoconf, and gettext installed. Then,
-type "./autogen.sh" to build the needed configuration
+If you have checked this out from Subversion, you need to have:
+* automake >= 1.5
+* autoconf >= 2.52
+* gettext >= 0.12
+Then type "./autogen.sh" to build the needed configuration
files and proceed as stated below.
You will also probably need GNU m4 (perhaps installed as gm4).
-
+
Requirements
------------
First of all, you will also need a recent C++ compiler, where recent
means that the compilers are close to C++ standard conforming.
-Compilers that are known to compile LyX are egcs 1.1.x, gcc 2.95.x and
-later, and Digital C++ version 6.1 and later. Please tell us your
-experience with other compilers. It is _not_ possible to compile LyX
-with gcc 2.7.x and 2.8.x, and this is not likely to change in the
-future.
-
-Note that, contrary to LyX 1.0.x, LyX 1.2.x makes great use of C++
-Standard Template Library (STL); this means that gcc users will have
-to install the relevant libstdc++ library to be able to compile this
-version.
-
-Both an Xforms and Xpm libraries should be installed to compile LyX.
-It is imperative that you have the correct versions of these
-libraries, and their associated header files.
-
-As of LyX version 1.2.0, you will need to have Xforms library and
-header version 0.88 or 0.89. Version 0.89.6 is the one which works
-best, but the old stable 0.88.1 version is still supported. On some
-systems, such as linux ELF, there are shared library versions of the
-Xforms library, which require an installation step to configure the
-system.
-
-Xforms is available (free) only in binary format, source code is not
-available. If it is not available for your machine, contact the Xforms
-developers to request a version for your system. You can get it from
-
- http://world.std.com/~xforms/
- ftp://ncmir.ucsd.edu/pub/xforms/
- ftp://ftp.lyx.org/pub/xforms/
- ftp://ftp.fu-berlin.de/unix/X11/gui/xforms
- ftp://ftp.cs.ruu.nl/pub/XFORMS/
-
-If you use a rpm-based linux distribution, such as RedHat or Mandrake,
-we recommend that you grab a version of xforms from
- ftp://ftp.lyx.org/pub/lyx/contrib
-as the rpm packages commonly found are compiled against glibc 2.0
-instead of 2.[12], and this causes occasional crashes.
-
-In addition, you must have libXpm version 4.7 or newer.
-
-Note that the Qt and Gnome frontends are still under development, and
-as a result are only useful if you want to help out with testing and
-development.
-
+Compilers that are known to compile LyX are gcc 2.95.x and later
+and Digital C++ version 6.1 and later. Please tell us your experience
+with other compilers.
+
+It is _not_ possible to compile LyX with gcc 2.7.x and 2.8.x.
+
+LyX 1.4.x makes great use of C++ Standard Template Library (STL).
+This means that gcc users will have to install the relevant libstdc++
+library to be able to compile this version of LyX. Users of gcc 2.95.x
+will have to install the STLPort version of these libraries as the
+ones that come with gcc 2.95.x are too broken for us to use.
+
+LyX has been tested with Qt 4.1.5. The only special point to
+make is that you must ensure that both LyX and the Qt libraries are
+compiled with the same C++ compiler.
+
+Note that if Qt is using Xft2/fontconfig, you may need to install the
+latex-xft-fonts package (at ftp://ftp.lyx.org/pub/lyx/contrib/) to get
+maths symbols displayed properly. To find out, type:
+
+ ldd `which lyx` | grep fontconfig
+
+at the console. Both RH8 and Debian unstable distributions are known
+to use fontconfig.
+
+If, however, your version of Qt does not use fontconfig, then TeX
+fonts should be added to the font path. 'man xset' is your friend.
+
+* Other things to note
+
If you make modifications to files in src/ (for example by applying a
patch), you will need to have the GNU gettext package installed, due
-to some dependencies in the makefiles. You can find the latest version
+to some dependencies in the makefiles. You can get the latest version
from:
-
- ftp://ftp.gnu.org/gnu/gettext-0.10.xx.tar.gz.
-
-LyX contains a hack to work around this, but you should not rely too
-much on it.
+ ftp://ftp.gnu.org/gnu/gettext/
To use the thesaurus, you will need to install libAikSaurus, available
-from :
-
- http://aiken.clan11.com/aiksaurus/
-
-Finally, the two following programs should be available at
-configuration time:
+from:
+ http://aiksaurus.sourceforge.net/
- o Perl (at least 5.002) is needed for the reLyX script. reLyX will
- not be installed if perl is not found. If the environment
- variable PERL is set to point to some program, this value will be
- used, even if the program does no exist (this can be useful if
- the machine on which LyX is built is not the one where it will
- run).
+The two following programs should be available at configuration time:
o LaTeX2e should be correctly setup for the user you are logged in
as. Otherwise, LyX will not be able to run a number of tests. Note
that users can run these tests manually with Edit>Reconfigure.
+ o Python 2.3 or newer installed to be able to import older LyX files
+ with the lyx2lyx script (this script is called automatically when
+ opening a file).
+
Creating the Makefile
---------------------
-LyX can be configured using GNU autoconf utility which attempts to guess
-the configuration needed to suit your system. The standard way to use it
-is described in the file INSTALL.autoconf. In most cases you will be able
+LyX can be configured using GNU autoconf utility which attempts to guess
+the configuration needed to suit your system. The standard way to use it
+is described in the file INSTALL.autoconf. In most cases you will be able
to create the Makefile by typing
./configure
For more complicated cases, LyX configure takes the following specific
flags:
- o --with-extra-lib=DIRECTORY that specifies the path where LyX will find
- extra libraries (Xpm, xforms) it needs. Defaults to NONE (i.e. search
- in standard places). You can specify several directories, separated
- by colons.
+ o --with-extra-lib=DIRECTORY that specifies the path where LyX will
+ find extra libraries (qt4) it needs. Defaults to NONE
+ (i.e. search in standard places). You can specify several
+ directories, separated by colons.
o --with-extra-inc=DIRECTORY that gives the place where LyX will find
- xforms headers. Defaults to NONE (i.e. search in standard places).
+ extra headers. Defaults to NONE (i.e. search in standard places).
You can specify several directories, separated by colons.
o --with-extra-prefix[=DIRECTORY] that is equivalent to
--with-extra-lib=DIRECTORY/lib --with-extra-inc=DIRECTORY/include
If DIRECTORY is not specified, the current prefix is used.
- o --with-version-suffix will install LyX as lyx-<version>, e.g. lyx-1.2.0
- The LyX data directory will be something like <whatever>/lyx-1.2.0/.
+ o --with-version-suffix will install LyX as lyx-<version>, e.g. lyx-1.4.1
+ The LyX data directory will be something like <whatever>/lyx-1.4.1/.
Additionally your user configuration files will be found in e.g.
- $HOME/.lyx-1.2.0
+ $HOME/.lyx-1.4.1
- You can use this feature to install more than one version of LyX on
- the same system. You can optionally specify a "version" of your own,
- by doing something like : ./configure --with-version-suffix=-latestcvs
+ You can use this feature to install more than one version of LyX
+ on the same system. You can optionally specify a "version" of your
+ own, by doing something like :
+ ./configure --with-version-suffix=-latestsvn
- Note that the standard configure options --program-prefix,--program-suffix
- and the others will not affect the shared LyX directory etc. so it
- is recommended that you use --with-version-suffix (or --prefix) instead.
+ Note that the standard configure options --program-prefix,
+ --program-suffix and the others will not affect the shared LyX
+ directory etc. so it is recommended that you use --with-version-suffix
+ (or --prefix) instead.
o --enable-optimization=VALUE enables you to set optimization to a
higher level as the default (-O), for example --enable-optimization=-O3.
o --disable-optimization - you can use this to disable compiler
optimization of LyX. The compile may be much quicker with some
- compilers, but LyX will run more slowly.
-
+ compilers, but LyX will run more slowly.
+
There are also flags to control the internationalization support in
LyX:
o --disable-nls suppresses all internationalization support,
- yielding a somewhat smaller code.
+ yielding a somewhat smaller code.
o --with-included-gettext forces the use of the included GNU gettext
library, although you might have another one installed.
care.
o You can also set the environment variable LINGUAS to a list of
- language in case ou do not want to install all the translation
+ language in case you do not want to install all the translation
files. For example, if you are only interested in German and
Finnish, you can type (with sh or bash)
export LINGUAS='de fi'
o --prefix=DIRECTORY specifies the root directory to use for
installation. [defaults to /usr/local]
- o --datadir=DIRECTORY gives the directory where all extra LyX
- files (lyxrc example, documentation, templates and layouts
- definitions) will be installed.
+ o --datadir=DIRECTORY gives the directory where all extra LyX
+ files (documentation, templates and layout definitions)
+ will be installed.
[defaults to ${prefix}/share/lyx${program_suffix}]
o --bindir=DIRECTORY gives the directory where the lyx binary
o --mandir=DIRECTORY gives the directory where the man pages will go.
[defaults to ${prefix}/man]
+ o --enable-maintainer-mode enables some code that automatically
+ rebuilds the configure script, makefiles templates and other useful
+ files when needed. This is off by default on releases, to avoid
+ surprises.
+
Note that the --with-extra-* commands are not really robust when it
comes to use of relative paths. If you really want to use a relative path
-here, you can prepend it with "`pwd`/".
+here, you can prepend it with "`pwd`/".
-If you do not like the default compile flags used (-g -O2 on gcc), you can
+If you do not like the default compile flags used (-g -O2 on gcc), you can
set CXXFLAGS variable to other values as follows:
o CXXFLAGS='-O2' (sh, bash)
o setenv CXXFLAGS '-O2' (csh, tcsh)
-Similarly, if you want to force the use of some specific compiler, you can
+Similarly, if you want to force the use of some specific compiler, you can
give a value to the CXX variable.
-If you encounter problems, please read the section 'Problems' at the end of
-this file.
+If you encounter problems, please read the section 'Problems' at the end of
+this file.
-In particular, the following options could be useful in some
-desperate cases:
+In particular, the following options could be useful in some desperate
+cases:
+
+ o --enable-debug will add debug information to your binary. This
+ requires a lot more disk space, but is a must if you want to try to
+ debug problems in LyX. The default is to have debug information
+ for development versions and prereleases only.
o --enable-warnings that make the compiler output more warnings during
the compilation of LyX. Opposite is --disable-warnings. By default,
o --enable-assertions that make the compiler generate run-time
code which checks that some variables have sane values. Opposite
is --disable-assertions. By default, this flag is on for
- development versions only.
+ development versions only.
+
+ o --enable-stdlib-debug adds some debug code in the standard
+ library; this slows down the code, but has been helpful in the
+ past to find bugs. By default, this flag is on for development
+ versions only.
- o --with-broken-headers that provides prototypes to replace functions
- not correctly defined in SunOS4 and SCO header files. Its only effect is
- to suppress a few warnings. It is autodetected by default.
+ o --enable-concept-checks adds some compile-time checks. There is no
+ run-time penalty. By default, this flag is on for development
+ versions only.
o --without-latex-config that disables the automatic detection of your
latex configuration. This detection is automatically disabled if
latex cannot be found. If you find that you have to use this
- flag, please report it as a bug.
+ flag, please report it as a bug.
- o --without-liberty suppresses the detection of the -liberty library
- (see the section `Problems').
+ o --with-frontend=FRONTEND that allows to specify which frontend you
+ want to use. The default value is qt4, which is the only available
+ frontend for now.
Compiling and installing LyX
o Compile LyX with the right compiler switches for your
architecture. Make sure you use the --without-latex-config switch
of configure, since others might not be interested by your
- configuration :-)
+ configuration :-)
o Create a file README.bin describing your distribution and
- referring to *you* if problems arise. As a model, you can use the
+ referring to *you* if problems arise. As a model, you can use the
file development/tools/README.bin.example, which can be a good
- starting point.
+ starting point.
o Type `make bindist'. This will create a file
- lyx-1.xx.yy-bin.tar.gz. Rename it to reflect you architecture
+ lyx-1.xx.yy-bin.tar.gz. Rename it to reflect you architecture
and the peculiarities of your build (e.g. static vs. dynamic).
- o Check that everything is correct by unpacking the distribution
- in some private place and running it. In particular, check the
+ o Check that everything is correct by unpacking the distribution
+ in some private place and running it. In particular, check the
output of `ldd lyx' to know which libraries are really needed.
o Upload your binary file to ftp.devel.lyx.org:/pub/incoming, and
- notify larsbj@lyx.org.
+ notify larsbj@lyx.org.
Problems
architectures. If you find that some of this hints are wrong, please
notify us.
- o If you have problems indicating that configure cannot find a part of
- the xforms or Xpm library, use the --with-extra-lib and --with-extra-inc
- options of configure to specify where these libraries reside.
-
- o Configure will seemingly fail to find xpm.h and forms.h on linux
- if the kernel headers are not available. Two cases are possible:
-
- - you have not installed the kernel sources. Then you should
- install them or at least the kernel-headers package (or
- whatever it is called in your distribution).
-
- - you have the sources, but you did a 'make mrproper' in the
- kernel directory (this this removes some symbolic links that
- are needed for compilation). A 'make symlinks' in linux kernel
- sources fixes that.
-
- o if you are using RedHat Linux 7.x, you must make sure you have the
- latest updated gcc and related packages installed (at least -85),
- or LyX will not compile or will be mis-compiled.
-
- o if you get an error message when compiling LyX that looks like this :
-
- ../../src/minibuffer.h:17: using directive `Object' introduced
- ambiguous type `_ObjectRec *'
-
- then you need to upgrade the version of the xforms library you have
- installed.
-
- o It is possible to compile lyx with Tru64 Unix cxx compiler
- version 6.2, provided one uses
+ o On SUN Sparc Solaris 8, you need gnumake. The LyX makefiles do not
+ work with Solaris make.
+
+ The Solaris ar seg-faults trying to build the insets library. You
+ will need to use the ar from the GNU binutils for this subdirectory.
+
+ o LyX can be compiled on Tru64 Unix with either GNU's gcc or the default
+ Compaq cxx compiler.
+
+ There are no Alpha-specific problems with gcc.
+
+ The following notes all refer to compilation with the Compaq cxx compiler.
+
+ LyX cannot be compiled on Tru64 Unix 4.0d or 4.0e with the default cxx
+ compiler. You should upgrade to at least cxx V6.2, to be found at
+ ftp::/ftp.compaq.com/pub/products/C-CXX/tru64/cxx/CXX622V40.tar. Users
+ running Tru64 Unix 4.0f and greater should have no real problems compiling
+ LyX.
+
+ cxx V6.2 will compile LyX out of the box.
+ cxx V6.3-020 is also known to work, although there is a bug in
+ /usr/include/cxx/deque that will break compilation in FormPreferences.C.
+ Compaq are investigating, but a patch that works /now/ is:
+
+--- /usr/include/cxx/deque_safe Mon Mar 4 21:09:50 2002
++++ /usr/include/cxx/deque Mon Mar 4 21:09:00 2002
+@@ -570,9 +570,11 @@
+ {
+ if (size() >= x.size())
+ erase(copy(x.begin(), x.end(), begin()), end());
+- else
+- copy(x.begin() + size(), x.end(),
+- inserter(*this,copy(x.begin(),x.begin()+size(),begin())));
++ else {
++ const_iterator mid = x.begin() + difference_type(size());
++ copy(x.begin(), mid, begin());
++ insert(end(), mid, x.end());
++ }
+ }
+ return *this;
+ }
+
+ At the time of writing, cxx V6.5-026 is the latest cxx compiler. It is
+ /not/ recommended. The compiler itself appears to be both buggy and
+ extremely bloated (trebling the size of the stripped LyX binary).
+
+ In order to compile LyX with the cxx compiler, you should run configure
+ with the following flags:
CXX='cxx -std strict_ansi'
- CXXFLAGS='-ptr /tmp/lyx_cxx_repository -g'
- CC=cc
-
- Note that this will not work when compiling directly from the cvs
- repository, due to the tricks used by automake for dependencies. Ask
- Jean-Marc.Lasgouttes@inria.fr for a workaround.
-
- Or rather, it may well work if you are using automake 1.5 and autoconf 2.5
- or greater, but you'll have to patch automake's depcomp first. (Depcomp
- is a little shell script to automagically work out file dependencies
- and it's broken for automake 1.5 and Tru64 :-(). The patch is to be found
- in config/depcomp.diff.
- Angus 22 March, 2002.
-
- o On Tru64 Unix, you may have to compile with
- --with-included-string to work around a Tru64 linker limitation
- (the STL string template creates names which may be too long). We
- also had reports that it helps with gcc 2.95.2 on solaris 2.6.
-
- Using Tru64 Unix 4.0e, the std::string is fine.
- Angus 22 March, 2002.
-
- o On Tru64 Unix with cxx, you may have a compilation error in
- lyx_main.C if you have GNU gettext installed. This is due to a bug
- in gettext. To solve this, you can either (1) configure with
- --with-included-gettext or (2) add -D__STDC__ to cxx flags.
-
- o On Tru64 Unix 4.0e, the STL library routine std::count is broken
- (/usr/include/cxx/algorithm.cc, line 289 on my machine).
- It calculates "n" but does not return it! The fix is to add "return n;" to
- the end of the (4-line long) routine.
- Angus 22 March, 2002.
-
- o On Tru64 Unix 4.0e, compilation of support/lyxsum.C dies horribly. The
- work-around is to use the old version, 1.18, of this routine. Ask
- Angus Leeming <leeming@lyx.org> for details.
- Angus 22 March, 2002.
-
- o According to David Sundqvist <David_Sundqvist@vd.volvo.se>, some
- changes are needed to compile with aCC on HP-UX 10.20. These are the
- relevant changes in the makefile (with comments tagged on):
-
- CXX = /opt/aCC/bin/aCC
- CXXFLAGS = -O +inst_none # The aCC compiler tries to run instantiations
- # which currently break.
-
- LIBS = -lforms -lXpm -lSM -lICE -lc -lm -lX11 -lCsup # must link with Csup
- LDFLAGS = -L/opt/aCC/lib # perhaps not needed.
-
-
+ CXXFLAGS='-nopure_cname -nocleanup -ptr /tmp/lyx_cxx_repository -O2'
+ CC='cc -std1'
+ The -nopure_cname flag is needed for compilers V6.3 and above because
+ LyX makes use of functions like popen, pclose that are defined in the
+ c version of <stdio.h> but are not formally part of any c/c++ standard.
+ They are not, therefore, included in the <cstdio> header file.
projects / lyx.git / blobdiff