+#, fuzzy
+#~ msgid "DVI-PS Options"
+#~ msgstr "選項"
+
+#~ msgid "LongTableNoNumber"
+#~ msgstr "無編號長表格"
+
+#~ msgid "Can't add horizontal grid lines in '%1$s'"
+#~ msgstr "無法在「%1$s」中加入水平網格線"
+
+#~ msgid "Inner box -- needed for fixed width & line breaks"
+#~ msgstr "內框 -- 固定寬度 & 分列符號所需"
+
+#~ msgid "Don't uncompress image before exporting to LaTeX"
+#~ msgstr "匯出至 LaTeX 之前不解壓縮圖像"
+
+#~ msgid "Don't un&zip on export"
+#~ msgstr "匯出時不解壓縮(&Z)"
+
+#~ msgid "Document &class"
+#~ msgstr "文件類別(&c)"
+
+#~ msgid "Copy to Clip&board"
+#~ msgstr "複製到剪貼簿(&b)"
+
+#~ msgid "Forward search"
+#~ msgstr "向下搜尋"
+
+#~ msgid "Printer Command Options"
+#~ msgstr "列印命令選項"
+
+#~ msgid "Extension to be used when printing to file."
+#~ msgstr "列印到檔案時所用的延伸功能."
+
+#~ msgid "File ex&tension:"
+#~ msgstr "副檔名(&t):"
+
+#~ msgid "Option used to print to a file."
+#~ msgstr "用來列印到檔案的選項."
+
+#~ msgid "Print to &file:"
+#~ msgstr "列印到檔案(&f):"
+
+#~ msgid "Option used to print to non-default printer."
+#~ msgstr "列印到非預設印表機所用的選項."
+
+#~ msgid "Set &printer:"
+#~ msgstr "設定印表機(&p):"
+
+#~ msgid "Option used with spool command to set printer."
+#~ msgstr "與設定印表機的暫存命令一同使用的選項."
+
+#~ msgid "Spool &printer:"
+#~ msgstr "排存(Spool)印表機(&p):"
+
+#~ msgid ""
+#~ "Command transmitted to the system to actually print the postscript file."
+#~ msgstr "傳送到系統的命令, 以實際地列印 postscript 檔案."
+
+#~ msgid "Spool co&mmand:"
+#~ msgstr "排存(Spool)命令(&m):"
+
+#~ msgid "Option used to reverse page order."
+#~ msgstr "反向頁面排序所用的選項."
+
+#~ msgid "Re&verse pages:"
+#~ msgstr "反向頁面(&v):"
+
+#~ msgid "&Number of copies:"
+#~ msgstr "複本數量(&N):"
+
+#~ msgid "Option used to set number of copies."
+#~ msgstr "指定複本數量所用的選項."
+
+#~ msgid "Option used to print a range of pages."
+#~ msgstr "列印某範圍頁面的選項."
+
+#~ msgid "Co&llated:"
+#~ msgstr "排序(&l):"
+
+#~ msgid "Pa&ge range:"
+#~ msgstr "頁面範圍(&g):"
+
+#~ msgid "Option used to collate multiple copies."
+#~ msgstr "用來排序多重份數的選項."
+
+#~ msgid "&Odd pages:"
+#~ msgstr "奇數頁面(&O):"
+
+#~ msgid "&Even pages:"
+#~ msgstr "偶數頁面(&E):"
+
+#~ msgid "Any other options you'd like to use with the printer command."
+#~ msgstr "您會與印表機命令一起使用的任何其他選項."
+
+#~ msgid "E&xtra options:"
+#~ msgstr "其他選項(&x):"
+
+#~ msgid "Customizes output to a given printer. Expert option."
+#~ msgstr "自訂輸出到給定的印表機. 專家選項."
+
+#~ msgid ""
+#~ "Normally, this needs to be checked only if you are using dvips as your "
+#~ "printer command and you have config.<printer> files installed for all "
+#~ "your printers."
+#~ msgstr ""
+#~ "通常, 只有如果您是使用 dvips 做為您的印表機命令, 而且對於所有印表機, 您都"
+#~ "有安裝 config.<printer> 檔案, 才需要勾選它."
+
+#~ msgid "Adapt &output to printer"
+#~ msgstr "適配輸出 到印表機(&o)"
+
+#~ msgid "Name of the default printer"
+#~ msgstr "預設的印表機名稱"
+
+#~ msgid "Default &printer:"
+#~ msgstr "預設印表機(&p):"
+
+#~ msgid "Printer co&mmand:"
+#~ msgstr "印表機命令(&m):"
+
+#~ msgid "Pages"
+#~ msgstr "頁面"
+
+#~ msgid "Page number to print from"
+#~ msgstr "起始列印頁碼"
+
+#~ msgid "&To:[[as in 'From page x to page y']]"
+#~ msgstr "到(&T):"
+
+#~ msgid "Page number to print to"
+#~ msgstr "結束列印頁碼"
+
+#~ msgid "Print all pages"
+#~ msgstr "列印所有頁面"
+
+#~ msgid "Fro&m"
+#~ msgstr "從(&m)"
+
+#~ msgid "Print &odd-numbered pages"
+#~ msgstr "列印奇數頁面(&o)"
+
+#~ msgid "Print &even-numbered pages"
+#~ msgstr "列印偶數頁面(&e)"
+
+#~ msgid "Print in reverse order"
+#~ msgstr "從最後一頁開始印, 最後印第一頁"
+
+#~ msgid "Re&verse order"
+#~ msgstr "反向排序(&v)"
+
+#~ msgid "Copie&s"
+#~ msgstr "份數(&s)"
+
+#~ msgid "Number of copies"
+#~ msgstr "複本數量"
+
+#~ msgid "Collate copies"
+#~ msgstr "自動分頁"
+
+#~ msgid "&Collate"
+#~ msgstr "排序(&C)"
+
+#~ msgid "&Print"
+#~ msgstr "列印(&P)"
+
+#~ msgid "Print Destination"
+#~ msgstr "列印目的"
+
+#~ msgid "Send output to the printer"
+#~ msgstr "發送輸出到印表機"
+
+#~ msgid "P&rinter:"
+#~ msgstr "印表機(&R):"
+
+#~ msgid "Send output to the given printer"
+#~ msgstr "發送輸出到給定的印表機"
+
+#~ msgid "Send output to a file"
+#~ msgstr "發送輸出到檔案"
+
+#~ msgid "&Longtable"
+#~ msgstr "長表格(&L)"
+
+#~ msgid "Separate paragraphs with"
+#~ msgstr "分隔段落的方法"
+
+#~ msgid "The caption as it appears in the list of figures"
+#~ msgstr "出現在 圖目錄 的 標題"
+
+#~ msgid "Lists"
+#~ msgstr "清單/列舉"
+
+#~ msgid "Top Line|n"
+#~ msgstr "頂列(n)|n"
+
+#~ msgid "Bottom Line|i"
+#~ msgstr "底列(i)|i"
+
+#~ msgid "Print...|P"
+#~ msgstr "列印(P)...|P"
+
+#~ msgid "A bitmap file.\n"
+#~ msgstr "點陣圖檔案. \n"
+
+#~ msgid "sxd|OpenOffice"
+#~ msgstr "sxd|OpenOffice"
+
+#~ msgid "SVG"
+#~ msgstr "SVG"
+
+#~ msgid ""
+#~ "Could not print the document %1$s.\n"
+#~ "Check that your printer is set up correctly."
+#~ msgstr ""
+#~ "無法列印文件 %1$s. \n"
+#~ "檢查您的印表機是否設置正確."
+
+#~ msgid "Print document failed"
+#~ msgstr "列印文件失敗"
+
+#~ msgid "Could not remove temporary directory"
+#~ msgstr "無法移除暫存目錄"
+
+#~ msgid "Unknown document class"
+#~ msgstr "不明的文件類別"
+
+#~ msgid "Using the default document class, because the class %1$s is unknown."
+#~ msgstr "正在使用預設文件類別, 因為類別 %1$s 不明."
+
+#~ msgid "Unable to parse \"%1$s\""
+#~ msgstr "無法解析「%1$s」"
+
+#~ msgid "Unrecognized target \"%1$s\""
+#~ msgstr "無法辨識的目標「%1$s」"
+
+#~ msgid "Error exporting to DVI."
+#~ msgstr "匯出 DVI 發生錯誤."
+
+#~ msgid "Error running external commands."
+#~ msgstr "執行外部命令時發生錯誤."
+
+#~ msgid "Included File Invalid"
+#~ msgstr "包含檔案無效"
+
+#~ msgid ""
+#~ "Saving this document to a new location has made the file:\n"
+#~ " %1$s\n"
+#~ "inaccessible. You will need to update the included filename."
+#~ msgstr ""
+#~ "將此檔案儲存到新的位置, 已造成此檔案:\n"
+#~ " %1$s\n"
+#~ "無法讀取. 您需要更新包含檔的檔名."
+
+#~ msgid "Unable to remove temporary directory"
+#~ msgstr "無法移除暫存目錄"
+
+#~ msgid "Built on %1$s[[date]], %2$s[[time]]"
+#~ msgstr "建立於 %1$s, %2$s"
+
+#~ msgid "The option for specifying whether the copies should be collated."
+#~ msgstr "用於指定複本是否應該排序的選項."
+
+#~ msgid "The option for specifying the number of copies to print."
+#~ msgstr "用於指定列印份數的選項."
+
+#~ msgid ""
+#~ "The default printer to print on. If none is specified, LyX will use the "
+#~ "environment variable PRINTER."
+#~ msgstr "預設用來列印的印表機. 如果沒有指定, LyX 將使用環境變數 PRINTER."
+
+#~ msgid "The option to print only even pages."
+#~ msgstr "只有列印偶數頁面的選項."
+
+#~ msgid ""
+#~ "Extra options to pass to printing program after everything else, but "
+#~ "before the filename of the DVI file to be printed."
+#~ msgstr ""
+#~ "於其他東西之後傳遞給列印程式的額外選項, 但是位於要列印的 DVI 檔名之前."
+
+#~ msgid "Extension of printer program output file. Usually \".ps\"."
+#~ msgstr "印表機程式輸出檔案的延伸檔名. 常常是「.ps」."
+
+#~ msgid "The option to print only odd pages."
+#~ msgstr "只列印奇數頁面的選項."
+
+#~ msgid "The option for specifying a comma-separated list of pages to print."
+#~ msgstr "用於指定以逗號分隔的列印頁面清單的選項."
+
+#~ msgid "The option to reverse the order of the pages printed."
+#~ msgstr "反向排序列印頁面的選項."
+
+#~ msgid ""
+#~ "When set, this printer option automatically prints to a file and then "
+#~ "calls a separate print spooling program on that file with the given name "
+#~ "and arguments."
+#~ msgstr ""
+#~ "設定時, 此印表機選項會自動列印到檔案, 然後呼叫另外的列印暫存作業程式, 並以"
+#~ "給定的名稱和引數用於該檔案."
+
+#~ msgid ""
+#~ "If you specify a printer name in the print dialog, the following argument "
+#~ "is prepended along with the printer name after the spool command."
+#~ msgstr ""
+#~ "如果您在列印對話框中指定印表機名稱, 下列引數將在暫存命令之後前置於印表機名"
+#~ "稱."
+
+#~ msgid "Option to pass to the print program to print to a file."
+#~ msgstr "傳遞給列印程式以列印檔案的選項."
+
+#~ msgid "Option to pass to the print program to print on a specific printer."
+#~ msgstr "傳遞給列印程式以列印於特定印表機的選項."
+
+#~ msgid ""
+#~ "Select for LyX to pass the name of the destination printer to your print "
+#~ "command."
+#~ msgstr "選取以傳遞目的印表機名稱給您的 LyX 列印命令."
+
+#~ msgid "Your favorite print program, e.g. \"dvips\", \"dvilj4\"."
+#~ msgstr "您偏愛的列印程式, 例如:「dvips」、「dvilj4」."
+
+#~ msgid "Unknown author index for change: %1$d\n"
+#~ msgstr "變更時不明的作者索引: %1$d\n"
+
+#~ msgid "Black"
+#~ msgstr "黑色"
+
+#~ msgid "White"
+#~ msgstr "白色"
+
+#~ msgid "Red"
+#~ msgstr "紅色"
+
+#~ msgid "Green"
+#~ msgstr "綠色"
+
+#~ msgid "Blue"
+#~ msgstr "藍色"
+
+#~ msgid "Cyan"
+#~ msgstr "青色"
+
+#~ msgid "Magenta"
+#~ msgstr "洋紅"
+
+#~ msgid "Yellow"
+#~ msgstr "黃色"
+
+#~ msgid "Printer"
+#~ msgstr "印表機"
+
+#~ msgid "Print Document"
+#~ msgstr "列印文件"
+
+#~ msgid "Print to file"
+#~ msgstr "列印到檔案"
+
+#~ msgid "PostScript files (*.ps)"
+#~ msgstr "PostScript 檔案 (*.ps)"
+
+#~ msgid "Open Navigator..."
+#~ msgstr "開啟巡覽..."
+
+#~ msgid "Insettext/tabular messages"
+#~ msgstr "嵌框文字/表格 訊息"
+
projects / lyx.git / blobdiff