+#: lib/ui/stdtoolbars.inc:1454
+msgid "Downstep"
+msgstr "Downstep"
+
+#: lib/ui/stdtoolbars.inc:1455
+msgid "Upstep"
+msgstr "Upstep"
+
+#: lib/ui/stdtoolbars.inc:1456
+msgid "Rising (accent)"
+msgstr "Rising (accent)"
+
+#: lib/ui/stdtoolbars.inc:1457
+msgid "Rising (tone letter)"
+msgstr "Rising (tone letter)"
+
+#: lib/ui/stdtoolbars.inc:1458
+msgid "Falling (accent)"
+msgstr "Falling (accent)"
+
+#: lib/ui/stdtoolbars.inc:1459
+msgid "Falling (tone letter)"
+msgstr "Falling (tone letter)"
+
+#: lib/ui/stdtoolbars.inc:1460
+msgid "High rising (accent)"
+msgstr "High rising (accent)"
+
+#: lib/ui/stdtoolbars.inc:1461
+msgid "High rising (tone letter)"
+msgstr "High rising (tone letter)"
+
+#: lib/ui/stdtoolbars.inc:1462
+msgid "Low rising (accent)"
+msgstr "Low rising (accent)"
+
+#: lib/ui/stdtoolbars.inc:1463
+msgid "Low rising (tone letter)"
+msgstr "Low rising (tone letter)"
+
+#: lib/ui/stdtoolbars.inc:1464
+msgid "Rising-falling (accent)"
+msgstr "Rising-falling (accent)"
+
+#: lib/ui/stdtoolbars.inc:1465
+msgid "Rising-falling (tone letter)"
+msgstr "Rising-falling (tone letter)"
+
+#: lib/ui/stdtoolbars.inc:1466
+msgid "Global rise"
+msgstr "Global rise"
+
+#: lib/ui/stdtoolbars.inc:1467
+msgid "Global fall"
+msgstr "Global fall"
+
+#: lib/xtemplates/chess.xtemplate:14
+msgid "ChessDiagram"
+msgstr "西洋棋圖形"
+
+#: lib/xtemplates/chess.xtemplate:15 lib/xtemplates/chess.xtemplate:34
+msgid "Chess diagram"
+msgstr "西洋棋圖形"
+
+#: lib/xtemplates/chess.xtemplate:17
+msgid ""
+"A chess position diagram.\n"
+"This template will use XBoard to edit the position.\n"
+"Use the 'File->Save Position' in XBoard to save\n"
+"the position that you want to display.\n"
+"Make sure to give it a '.fen' extension\n"
+"and remember to type in a relative path\n"
+"to the LyX document location.\n"
+"Within XBoard, use 'Edit->Edit Position'\n"
+"to enable general editing of the board.\n"
+"You might also check out the\n"
+"'Options->Test legality' option, and\n"
+"remember to middle and right click to\n"
+"insert new material in the board.\n"
+"In order for this to work, you have to\n"
+"put the bundled lyxskak.sty in a place\n"
+"that TeX will find it, and you will need\n"
+"to install the skak package from CTAN.\n"
+msgstr ""
+"西洋棋位置圖表. \n"
+"此模板將使用 XBoard 去編輯位置. \n"
+"使用 XBoard 中的「檔案->儲存位置」來儲存\n"
+"您想要顯示的位置. \n"
+"請確認給它「.fen」延伸檔名\n"
+"並記得輸入相對於\n"
+" LyX 文件位置的路徑. \n"
+"在 XBoard 之內, 使用「編輯->編輯位置」\n"
+"以啟用模板的一般編輯. \n"
+"您也許也要選用一下\n"
+"「選項->測試合法」選項, 並\n"
+"記得按下中鍵和右鍵以\n"
+"在模板中插入新材料. \n"
+"為了讓它有所作用, 您必須\n"
+"置放附帶的 lyxskak.sty 在 TeX 找得到\n"
+"的地方, 而您將需要\n"
+"從 CTAN 安裝 skak 套件. \n"
+
+#: lib/xtemplates/dia.xtemplate:14
+msgid "Dia"
+msgstr "Dia"
+
+#: lib/xtemplates/dia.xtemplate:15 lib/xtemplates/dia.xtemplate:18
+msgid "Dia diagram"
+msgstr "Dia 流程圖"
+
+#: lib/xtemplates/dia.xtemplate:17
+msgid "Dia diagram.\n"
+msgstr "Dia 流程圖.\n"
+
+#: lib/xtemplates/gnumeric.xtemplate:13
+msgid "GnumericSpreadsheet"
+msgstr "Gnumeric 試算表"
+
+#: lib/xtemplates/gnumeric.xtemplate:14 lib/xtemplates/gnumeric.xtemplate:21
+#: lib/examples/Articles:0
+msgid "Spreadsheet"
+msgstr "試算表"
+
+#: lib/xtemplates/gnumeric.xtemplate:16
+#, fuzzy
+msgid ""
+"A spreadsheet made with Gnumeric, LibreOffice, OpenOffice or Excel.\n"
+"It imports as a multi-page table, so any length\n"
+"is ok. Excessive width could be a problem.\n"
+"The gnumeric software is necessary for conversion,\n"
+"both for gnumeric and excel files.\n"
+msgstr ""
+"Gnumeric, LibreOffice, OpenOffice 或 Excel 製作的試算表.\n"
+"檔案將輸入成 長表格, 因此任何長度都 OK.\n"
+"但過寬的寬度會造成問題.\n"
+"不管是 Gnumeric 檔案或 Excel 檔案, \n"
+"電腦內都需要安裝 gnumeric 的軟體以進行轉換\n"
+"註: 試算表內的中文字, 可能無法正常轉換!\n"
+
+#: lib/xtemplates/inkscape.xtemplate:38
+#, fuzzy
+msgid "Inkscape"
+msgstr "橫印(&L)"
+
+#: lib/xtemplates/inkscape.xtemplate:39 lib/xtemplates/inkscape.xtemplate:44
+#, fuzzy
+msgid "Inkscape figure"
+msgstr "插入浮動圖片框"
+
+#: lib/xtemplates/inkscape.xtemplate:41
+msgid ""
+"An Inkscape figure.\n"
+"Note that using this template automatically uses the \n"
+"document text in the image (like with the Xfig template).\n"
+msgstr ""
+
+#: lib/xtemplates/lilypond.xtemplate:15 lib/xtemplates/lilypond.xtemplate:21
+msgid "Lilypond typeset music"
+msgstr "Lilypond 排版音樂"
+
+#: lib/xtemplates/lilypond.xtemplate:17
+msgid ""
+"Sheet music typeset by GNU LilyPond,\n"
+"converted to .pdf or .eps for inclusion\n"
+"Using .eps requires at least lilypond 2.6\n"
+"Using .pdf requires at least lilypond 2.9\n"
+msgstr ""
+"GNU LilyPond 製作的樂譜排版, \n"
+"轉換到 .pdf 或 .eps 以利包含\n"
+"使用 .eps 需要至少 lilypond 2.6\n"
+"使用 .pdf 需要至少 lilypond 2.9\n"
+
+#: lib/xtemplates/pdfpages.xtemplate:13
+msgid "PDFPages"
+msgstr "PDF 頁面"
+
+#: lib/xtemplates/pdfpages.xtemplate:14 lib/xtemplates/pdfpages.xtemplate:28
+msgid "PDF pages"
+msgstr "PDF 頁面"
+
+#: lib/xtemplates/pdfpages.xtemplate:16
+msgid ""
+"Includes PDF documents, using the 'pdfpages' package.\n"
+"To include multiple pages, use the 'pages'-option,\n"
+"which must be inserted to 'Options'.\n"
+"Examples:\n"
+"* pages={x-y} (for a range of pages)\n"
+"* pages={x,y,z} (for specific pages)\n"
+"* pages=- (to include all pages)\n"
+"* pages=last-1 (to include all pages in reverse order)\n"
+"With the option 'noautoscale' the PDF pages are\n"
+"inserted in their original size.\n"
+"Read the documentation of the pdfpages package\n"
+"for further options and details.\n"
+msgstr ""
+"使用「pdfpages」套件庫包含 PDF 文件檔案. \n"
+"預設只包含一頁 PDF\n"
+"為了包含多頁, 可使用 'pages' 選項,\n"
+"設定於「LaTeX 和 LyX 選項」\n"
+"標籤頁內的「選項」例:\n"
+"* pages={x-y} (對某個範圍頁面)\n"
+"* pages={x,y,z} (對特定頁面)\n"
+"* pages=- (包含所有頁面)\n"
+"* pages=last-1 (包含所有頁面, 但以反序方式放置)\n"
+"若選項設定 'noautoscale', 則 PDF 頁面\n"
+"將會以原始尺寸插入文件.\n"
+"請參考 pdfpages 套件的說明文件以獲取更多資訊.\n"
+
+#: lib/xtemplates/raster_image.xtemplate:14
+msgid "RasterImage"
+msgstr "RasterImage"
+
+#: lib/xtemplates/raster_image.xtemplate:17
+#: lib/xtemplates/raster_image.xtemplate:24
+msgid "Raster image"
+msgstr "Raster image"
+
+#: lib/xtemplates/raster_image.xtemplate:22
+msgid ""
+"A bitmap file.\n"
+"Use this template to include bitmap images of any kind.\n"
+msgstr ""
+
+#: lib/xtemplates/vector_graphics.xtemplate:14
+#, fuzzy
+msgid "VectorGraphics"
+msgstr "圖形"
+
+#: lib/xtemplates/vector_graphics.xtemplate:15
+#: lib/xtemplates/vector_graphics.xtemplate:24
+#, fuzzy
+msgid "Vector graphics"
+msgstr "向量圖形格式 (Vector &graphics format)"
+
+#: lib/xtemplates/vector_graphics.xtemplate:17
+msgid ""
+"A vector graphics file.\n"
+"Use this template to include vector graphics of any kind.\n"
+"LyX will try to retain the vector properties of the image for\n"
+"the final output.\n"
+"Note that specialized templates exist for Xfig figures and Dia diagrams.\n"
+"The specialized templates allow to automatically use the document font in\n"
+"the figures, which is not possible with this general template.\n"
+msgstr ""
+
+#: lib/xtemplates/xfig.xtemplate:33
+msgid "XFig"
+msgstr "XFig"
+
+#: lib/xtemplates/xfig.xtemplate:34 lib/xtemplates/xfig.xtemplate:37
+msgid "Xfig figure"
+msgstr "Xfig 圖片"
+
+#: lib/xtemplates/xfig.xtemplate:36
+msgid "An Xfig figure.\n"
+msgstr "一張 Xfig 圖片\n"
+
+#: lib/configure.py:619
+msgid "tgo"
+msgstr "tgo"
+
+#: lib/configure.py:619
+msgid "tgo|Tgif"
+msgstr "tgo|Tgif"
+
+#: lib/configure.py:622
+msgid "FIG"
+msgstr "FIG"
+
+#: lib/configure.py:625
+msgid "DIA"
+msgstr "DIA"
+
+#: lib/configure.py:628
+msgid "sxd"
+msgstr "sxd"
+
+#: lib/configure.py:628
+#, fuzzy
+msgid "sxd|OpenDocument"
+msgstr "OpenDocument"
+
+#: lib/configure.py:631
+msgid "Grace"
+msgstr "Grace"
+
+#: lib/configure.py:634
+msgid "FEN"
+msgstr "FEN"
+
+#: lib/configure.py:637
+msgid "SVG"
+msgstr "SVG"
+
+#: lib/configure.py:638
+#, fuzzy
+msgid "SVG (compressed)"
+msgstr "壓縮檔案(m)|m"
+
+#: lib/configure.py:641
+msgid "BMP"
+msgstr "BMP"
+
+#: lib/configure.py:642
+msgid "GIF"
+msgstr "GIF"
+
+#: lib/configure.py:643
+msgid "jpeg"
+msgstr "jpeg"
+
+#: lib/configure.py:643
+msgid "jpeg|JPEG"
+msgstr "jpeg|JPEG"
+
+#: lib/configure.py:644
+msgid "PBM"
+msgstr "PBM"
+
+#: lib/configure.py:645
+msgid "PGM"
+msgstr "PGM"
+
+#: lib/configure.py:646 src/frontends/qt/GuiClipboard.cpp:176
+msgid "PNG"
+msgstr "PNG"
+
+#: lib/configure.py:647
+msgid "PPM"
+msgstr "PPM"
+
+#: lib/configure.py:648
+msgid "TIFF"
+msgstr "TIFF"
+
+#: lib/configure.py:649
+msgid "XBM"
+msgstr "XBM"
+
+#: lib/configure.py:650
+msgid "XPM"
+msgstr "XPM"
+
+#: lib/configure.py:661
+msgid "Plain text (chess output)"
+msgstr "Plain text (chess output)"
+
+#: lib/configure.py:662 src/frontends/qt/GuiDocument.cpp:1573
+#: src/frontends/qt/GuiErrorList.cpp:45
+msgid "DocBook"
+msgstr "DocBook"
+
+#: lib/configure.py:662
+msgid "DocBook|B"
+msgstr "DocBook|B"
+
+#: lib/configure.py:663
+msgid "DocBook (XML)"
+msgstr "DocBook (XML)"
+
+#: lib/configure.py:664
+msgid "Graphviz Dot"
+msgstr "Graphviz Dot"
+
+#: lib/configure.py:665
+msgid "LaTeX (dviluatex)"
+msgstr "LaTeX (dviluatex)"
+
+#: lib/configure.py:666
+msgid "LaTeX (pLaTeX)"
+msgstr "LaTeX (pLaTeX)"
+
+#: lib/configure.py:667
+msgid "NoWeb"
+msgstr "NoWeb"
+
+#: lib/configure.py:667
+msgid "NoWeb|N"
+msgstr "NoWeb|N"
+
+#: lib/configure.py:669
+#, fuzzy
+msgid "Sweave (Japanese)"
+msgstr "Sweave 選項"
+
+#: lib/configure.py:669
+#, fuzzy
+msgid "Sweave (Japanese)|S"
+msgstr "Sweave Manual|S"
+
+#: lib/configure.py:670
+msgid "R/S code"
+msgstr "R/S code"
+
+#: lib/configure.py:672
+#, fuzzy
+msgid "Rnw (knitr, Japanese)"
+msgstr "Rnw (knitr 套件)"
+
+#: lib/configure.py:673
+msgid "LilyPond book (LaTeX)"
+msgstr "LilyPond book (LaTeX)"
+
+#: lib/configure.py:674
+#, fuzzy
+msgid "LilyPond book (pLaTeX)"
+msgstr "LilyPond book (LaTeX)"
+
+#: lib/configure.py:675
+msgid "LaTeX (plain)"
+msgstr "LaTeX (plain)"
+
+#: lib/configure.py:675
+msgid "LaTeX (plain)|L"
+msgstr "LaTeX (plain)|L"
+
+#: lib/configure.py:676
+msgid "LaTeX (LuaTeX)"
+msgstr "LaTeX (LuaTeX)"
+
+#: lib/configure.py:677
+msgid "LaTeX (pdflatex)"
+msgstr "LaTeX (pdflatex)"
+
+#: lib/configure.py:678
+msgid "LaTeX (XeTeX)"
+msgstr "LaTeX (XeTeX)"
+
+#: lib/configure.py:679
+msgid "LaTeX (clipboard)"
+msgstr "LaTeX (剪貼簿)"
+
+#: lib/configure.py:680
+msgid "Plain text"
+msgstr "純文字"
+
+#: lib/configure.py:680
+msgid "Plain text|a"
+msgstr "純文字(a)|a"
+
+#: lib/configure.py:681
+msgid "Plain text (pstotext)"
+msgstr "純文字 (pstotext)"
+
+#: lib/configure.py:682
+msgid "Plain text (ps2ascii)"
+msgstr "純文字 (ps2ascii)"
+
+#: lib/configure.py:683
+msgid "Plain text (catdvi)"
+msgstr "純文字 (catdvi)"
+
+#: lib/configure.py:684
+msgid "Plain Text, Join Lines"
+msgstr "純文字, 連結句子"
+
+#: lib/configure.py:685
+msgid "Info (Beamer)"
+msgstr "Info (Beamer)"
+
+#: lib/configure.py:689
+msgid "LilyPond music"
+msgstr "LilyPond music"
+
+#: lib/configure.py:692
+msgid "Gnumeric spreadsheet"
+msgstr "Gnumeric 試算表"
+
+#: lib/configure.py:693
+msgid "Excel spreadsheet"
+msgstr "Excel 試算表"
+
+#: lib/configure.py:694
+msgid "MS Excel Office Open XML"
+msgstr ""
+
+#: lib/configure.py:695
+msgid "HTML Table (for spreadsheets)"
+msgstr ""
+
+#: lib/configure.py:696
+#, fuzzy
+msgid "OpenDocument spreadsheet"
+msgstr "OpenOffice 試算表"
+
+#: lib/configure.py:699
+msgid "LyXHTML"
+msgstr "LyXHTML"
+
+#: lib/configure.py:699
+msgid "LyXHTML|y"
+msgstr "LyXHTML|y"
+
+#: lib/configure.py:705 src/frontends/qt/GuiLog.cpp:253
+#: src/insets/InsetBibtex.cpp:144
+msgid "BibTeX"
+msgstr "BibTeX"
+
+#: lib/configure.py:713
+msgid "EPS"
+msgstr "EPS"
+
+#: lib/configure.py:714
+msgid "EPS (uncropped)"
+msgstr "EPS (未裁切的)"
+
+#: lib/configure.py:715 lib/examples/Articles:0
+msgid "EPS (cropped)"
+msgstr "EPS (裁切的)"
+
+#: lib/configure.py:716
+msgid "Postscript"
+msgstr "Postscript"
+
+#: lib/configure.py:716
+msgid "Postscript|t"
+msgstr "Postscript|t"
+
+#: lib/configure.py:725
+msgid "PDF (ps2pdf)"
+msgstr "PDF (ps2pdf)"
+
+#: lib/configure.py:725
+msgid "PDF (ps2pdf)|P"
+msgstr "PDF (ps2pdf)|P"
+
+#: lib/configure.py:726
+msgid "PDF (pdflatex)"
+msgstr "PDF (pdflatex)"
+
+#: lib/configure.py:726
+msgid "PDF (pdflatex)|F"
+msgstr "PDF (pdflatex)|F"
+
+#: lib/configure.py:727
+msgid "PDF (dvipdfm)"
+msgstr "PDF (dvipdfm)"
+
+#: lib/configure.py:727
+msgid "PDF (dvipdfm)|m"
+msgstr "PDF (dvipdfm)|m"
+
+#: lib/configure.py:728
+msgid "PDF (XeTeX)"
+msgstr "PDF (XeTeX)"
+
+#: lib/configure.py:728
+msgid "PDF (XeTeX)|X"
+msgstr "PDF (XeTeX)|X"
+
+#: lib/configure.py:729
+msgid "PDF (LuaTeX)"
+msgstr "PDF (LuaTeX)"
+
+#: lib/configure.py:729
+msgid "PDF (LuaTeX)|u"
+msgstr "PDF (LuaTeX)|u"
+
+#: lib/configure.py:730
+msgid "PDF (graphics)"
+msgstr "PDF (graphics)"
+
+#: lib/configure.py:731 lib/examples/Articles:0
+msgid "PDF (cropped)"
+msgstr "PDF (裁切的)"
+
+#: lib/configure.py:732
+#, fuzzy
+msgid "PDF (lower resolution)"
+msgstr "PDF (dvipdfm)"
+
+#: lib/configure.py:737
+msgid "DVI"
+msgstr "DVI"
+
+#: lib/configure.py:737
+msgid "DVI|D"
+msgstr "DVI|D"
+
+#: lib/configure.py:738
+msgid "DVI (LuaTeX)"
+msgstr "DVI (LuaTeX)"
+
+#: lib/configure.py:738
+msgid "DVI (LuaTeX)|V"
+msgstr "DVI (LuaTeX)|V"
+
+#: lib/configure.py:741
+msgid "DraftDVI"
+msgstr "DraftDVI"
+
+#: lib/configure.py:744 lib/configure.py:781
+msgid "htm"
+msgstr "htm"
+
+#: lib/configure.py:744 lib/configure.py:781
+msgid "htm|HTML"
+msgstr "htm|HTML"
+
+#: lib/configure.py:747
+msgid "Noteedit"
+msgstr "Noteedit"
+
+#: lib/configure.py:750
+#, fuzzy
+msgid "OpenDocument (tex4ht)"
+msgstr "OpenDocument"
+
+#: lib/configure.py:751
+#, fuzzy
+msgid "OpenDocument (eLyXer)"
+msgstr "OpenDocument"
+
+#: lib/configure.py:752
+#, fuzzy
+msgid "OpenDocument (Pandoc)"
+msgstr "OpenDocument"
+
+#: lib/configure.py:753
+msgid "OpenOffice.Org (sxw)"
+msgstr "OpenOffice.Org (sxw)"
+
+#: lib/configure.py:756
+msgid "Rich Text Format"
+msgstr "Rich Text Format"
+
+#: lib/configure.py:757
+msgid "MS Word"
+msgstr "MS Word"
+
+#: lib/configure.py:757
+msgid "MS Word|W"
+msgstr "MS Word|W"
+
+#: lib/configure.py:758
+msgid "MS Word Office Open XML"
+msgstr ""
+
+#: lib/configure.py:758
+msgid "MS Word Office Open XML|O"
+msgstr ""
+
+#: lib/configure.py:761
+msgid "Table (CSV)"
+msgstr "Table (CSV)"
+
+#: lib/configure.py:763 src/frontends/qt/GuiView.cpp:1444
+#: src/mathed/InsetMathMacroTemplate.cpp:541
+msgid "LyX"
+msgstr "LyX"
+
+#: lib/configure.py:764
+msgid "LyX 1.3.x"
+msgstr "LyX 1.3.x"
+
+#: lib/configure.py:765
+msgid "LyX 1.4.x"
+msgstr "LyX 1.4.x"
+
+#: lib/configure.py:766
+msgid "LyX 1.5.x"
+msgstr "LyX 1.5.x"
+
+#: lib/configure.py:767
+msgid "LyX 1.6.x"
+msgstr "LyX 1.6.x"
+
+#: lib/configure.py:768
+msgid "LyX 2.0.x"
+msgstr "LyX 2.0.x"
+
+#: lib/configure.py:769
+#, fuzzy
+msgid "LyX 2.1.x"
+msgstr "LyX 2.0.x"
+
+#: lib/configure.py:770
+#, fuzzy
+msgid "LyX 2.2.x"
+msgstr "LyX 2.0.x"
+
+#: lib/configure.py:771
+#, fuzzy
+msgid "LyX 2.3.x"
+msgstr "LyX 2.0.x"
+
+#: lib/configure.py:772
+msgid "CJK LyX 1.4.x (big5)"
+msgstr "CJK LyX 1.4.x (big5)"
+
+#: lib/configure.py:773
+msgid "CJK LyX 1.4.x (euc-jp)"
+msgstr "CJK LyX 1.4.x (euc-jp)"
+
+#: lib/configure.py:774
+msgid "CJK LyX 1.4.x (euc-kr)"
+msgstr "CJK LyX 1.4.x (euc-kr)"
+
+#: lib/configure.py:775
+msgid "LyX Preview"
+msgstr "LyX 預覽"
+
+#: lib/configure.py:776
+msgid "pdf_tex"
+msgstr ""
+
+#: lib/configure.py:776
+#, fuzzy
+msgid "pdf_tex|PDFTEX"
+msgstr "PDFTEX"
+
+#: lib/configure.py:777
+msgid "Program"
+msgstr "Program"
+
+#: lib/configure.py:778
+msgid "ps_tex"
+msgstr ""
+
+#: lib/configure.py:778
+msgid "ps_tex|PSTEX"
+msgstr ""
+
+#: lib/configure.py:779 src/frontends/qt/GuiClipboard.cpp:173
+msgid "Windows Metafile"
+msgstr "Windows Metafile"
+
+#: lib/configure.py:780 src/frontends/qt/GuiClipboard.cpp:172
+msgid "Enhanced Metafile"
+msgstr "Enhanced Metafile"
+
+#: lib/configure.py:900
+msgid "LyXBlogger"
+msgstr "LyXBlogger"
+
+#: lib/configure.py:1101
+msgid "gnuplot"
+msgstr ""
+
+#: lib/configure.py:1101
+msgid "gnuplot|Gnuplot"
+msgstr ""
+
+#: lib/configure.py:1174
+msgid "LyX Archive (zip)"
+msgstr "LyX Archive (zip)"
+
+#: lib/configure.py:1177
+msgid "LyX Archive (tar.gz)"
+msgstr "LyX Archive (tar.gz)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Game 1"
+msgstr "Game"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Game 2"
+msgstr "Game"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Example (LyXified)"
+msgstr "範例檔(&E):"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Example (raw)"
+msgstr "範例"
+
+#: lib/examples/Articles:0
+msgid "Gnuplot"
+msgstr ""
+
+#: lib/examples/Articles:0 src/TocBackend.cpp:295
+#: src/frontends/qt/GuiExternal.cpp:87
+msgid "External Material"
+msgstr "外部材料"
+
+#: lib/examples/Articles:0
+msgid "XY-Pic"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "XY-Figure"
+msgstr "圖"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Minted File Listing"
+msgstr "行內 程式碼列表(&i)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Instant Preview"
+msgstr "即時預覽(&P):"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Minted Listings"
+msgstr "程式碼列表 清單"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Itemize Bullets"
+msgstr "符號列舉"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Feynman Diagrams"
+msgstr "費曼(Feynman)圖|F"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Graphics and Insets"
+msgstr "&Graphics 套件的驅動器:"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Serial Letter 1"
+msgstr "Hebrew Letter"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Serial Letter 2"
+msgstr "Hebrew Letter"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Serial Letter 3"
+msgstr "Hebrew Letter"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Localization Test"
+msgstr "Location 位置"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Noweb2LyX"
+msgstr "Noweb"
+
+#: lib/examples/Articles:0
+msgid "Noweb Listerrors"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Hazard and Precautionary Statements"
+msgstr "風險與安全建議標準詞"
+
+#: lib/examples/Articles:0
+msgid "Multilingual Captions"
+msgstr "多語的標題"
+
+#: lib/examples/Articles:0
+msgid "LilyPond Book"
+msgstr "LilyPond 書"
+
+#: lib/examples/Articles:0 src/frontends/qt/GuiDocument.cpp:1738
+msgid "Modules"
+msgstr "模組"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Foils Landslide"
+msgstr "LandscapeSlide 橫印投影片"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Beamer (Complex)"
+msgstr "Beamer 註記"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Foils"
+msgstr "FoilTeX"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Welcome"
+msgstr "歡迎使用 LyX!"
+
+#: lib/examples/Articles:0
+msgid "Multilingual Typesetting with platex"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Multilingual Typesetting with CJKutf8"
+msgstr "Multilingual Captions(多語的標題)|C"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "IEEE Transactions Journal"
+msgstr "IEEE 會議"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "IEEE Transactions Conference"
+msgstr "IEEE Transactions Computer Society"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Springers Global Journal Template (V. 3)"
+msgstr "Springer SV Global (V. 3)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Mathematical Monthly"
+msgstr "數學符號"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "02 Foreword"
+msgstr "Foreword 前言"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "04 Acknowledgements"
+msgstr "Acknowledgements 致謝"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "00 Main File"
+msgstr "缺少檔案"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "07 Chapter"
+msgstr "Chapter 章"
+
+#: lib/examples/Articles:0
+msgid "09 Glossary"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "10 Solutions"
+msgstr "解法"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "11 References"
+msgstr "References 參考"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "01 Dedication"
+msgstr "Dedication 題辭"
+
+#: lib/examples/Articles:0
+msgid "05 Acronym"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "03 Preface"
+msgstr "Preface 序"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "06 Part"
+msgstr "Part 部"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "08 Appendix"
+msgstr "Appendix 附錄"
+
+#: lib/examples/Articles:0
+msgid "06 Acronym"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "09 Appendix"
+msgstr "Appendix 附錄"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "07 Part"
+msgstr "Part 部"
+
+#: lib/examples/Articles:0
+msgid "10 Glossary"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "08 Author"
+msgstr "Author 作者"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "05 Contributor List"
+msgstr "Contributor List 貢獻者清單"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Colored"
+msgstr "顏色"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Simple"
+msgstr "Simple CV"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Chapter 2"
+msgstr "Chapter 章"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Main File"
+msgstr "缺少檔案"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Chapter 1"
+msgstr "Chapter 章"
+
+#: lib/examples/Articles:0
+msgid "PhD Thesis"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Theses"
+msgstr "同義詞"
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+#, fuzzy
+msgid "Formal with Footline"
+msgstr "數學 線段"
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+#, fuzzy
+msgid "Formal without Footline"
+msgstr "Biography without photo 無照片傳記"
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+msgid "Grid with Head"
+msgstr ""
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+#, fuzzy
+msgid "No Borders"
+msgstr "邊框(&B)"
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+#, fuzzy
+msgid "Simple Grid"
+msgstr "Simple CV"
+
+#: src/Author.cpp:57
+#, fuzzy, c-format
+msgid "%1$s[[name]] (%2$s[[email]])"
+msgstr "建立於 %1$s, %2$s"
+
+#: src/BiblioInfo.cpp:803 src/BiblioInfo.cpp:853 src/BiblioInfo.cpp:864
+#: src/BiblioInfo.cpp:919 src/BiblioInfo.cpp:923
+msgid "ERROR!"
+msgstr "ERROR!"
+
+#: src/BiblioInfo.cpp:1298
+msgid "No year"
+msgstr "沒有年份"
+
+#: src/BiblioInfo.cpp:1308
+msgid "Bibliography entry not found!"
+msgstr "找不到參考書目項目!"
+
+#: src/Buffer.cpp:444
+msgid "Disk Error: "
+msgstr "磁碟錯誤: "
+
+#: src/Buffer.cpp:445
+#, c-format
+msgid ""
+"LyX could not create the temporary directory '%1$s' (Disk is full maybe?)"
+msgstr "LyX 無法建立暫時的目錄 '%1$s' (或許是磁碟滿了?)"
+
+#: src/Buffer.cpp:572
+msgid "LyX attempted to close a document that had unsaved changes!\n"
+msgstr "LyX 試圖關閉一個有變更但尚未儲存的文件檔\n"
+
+#: src/Buffer.cpp:576 src/Buffer.cpp:1661
+#, fuzzy
+msgid "Save failed! Document is lost."
+msgstr "儲存失敗! 倒霉. 失去文件了."
+
+#: src/Buffer.cpp:578
+msgid "Attempting to close changed document!"
+msgstr "試圖關閉已變更的文件"
+
+#: src/Buffer.cpp:587
+#, c-format
+msgid "Could not remove the temporary directory %1$s"
+msgstr "無法移除暫存目錄 %1$s"
+
+#: src/Buffer.cpp:994 src/Text.cpp:583
+#, c-format
+msgid "Unknown token: %1$s %2$s\n"
+msgstr "不明的符記: %1$s %2$s\n"
+
+#: src/Buffer.cpp:998 src/Buffer.cpp:1004 src/Buffer.cpp:1028
+msgid "Document header error"
+msgstr "文件頁首錯誤"
+
+#: src/Buffer.cpp:1003
+msgid "\\begin_header is missing"
+msgstr "\\begin_header 遺失"
+
+#: src/Buffer.cpp:1027
+msgid "\\begin_document is missing"
+msgstr "\\begin_document 遺失"
+
+#: src/Buffer.cpp:1039 src/Buffer.cpp:1045 src/Buffer.cpp:3034
+#: src/Buffer.cpp:3040
+msgid "Changes not shown in LaTeX output"
+msgstr "在 LaTeX 輸出中不顯示變更"
+
+#: src/Buffer.cpp:1040 src/Buffer.cpp:3035
+msgid ""
+"Changes will not be highlighted in LaTeX output, because neither dvipost nor "
+"xcolor/ulem are installed.\n"
+"Please install these packages or redefine \\lyxadded and \\lyxdeleted in the "
+"LaTeX preamble."
+msgstr ""
+"變更將無法在 LaTeX 輸出中以高亮度顯示, 因為不論是 dvipost 或 xcolor/ulem 都未"
+"安裝. \n"
+"請安裝這些套件, 或者在 LaTeX 前文中重新定義 \\lyxadded 和 \\lyxdeleted."
+
+#: src/Buffer.cpp:1046 src/Buffer.cpp:3041
+msgid ""
+"Changes will not be highlighted in LaTeX output when using pdflatex, because "
+"xcolor and ulem are not installed.\n"
+"Please install both packages or redefine \\lyxadded and \\lyxdeleted in the "
+"LaTeX preamble."
+msgstr ""
+"使用 pdflatex 時變更將無法在 LaTeX 輸出中以高亮度顯示, 因為 xcolor 和 ulem 並"
+"未安裝. \n"
+"請安裝這兩個套件, 或者在 LaTeX 前文中重新定義 \\lyxadded 和 \\lyxdeleted."
+
+#: src/Buffer.cpp:1088 src/BufferParams.cpp:457 src/frontends/qt/GuiLog.cpp:257
+#: src/insets/InsetIndex.cpp:469
+msgid "Index"
+msgstr "索引"
+
+#: src/Buffer.cpp:1191
+msgid "File Not Found"
+msgstr "找不到檔案"
+
+#: src/Buffer.cpp:1192
+#, c-format
+msgid "Unable to open file `%1$s'."
+msgstr "無法開啟「%1$s」."
+
+#: src/Buffer.cpp:1220 src/Buffer.cpp:1289
+msgid "Document format failure"
+msgstr "文件格式錯誤"
+
+#: src/Buffer.cpp:1221
+#, c-format
+msgid "%1$s ended unexpectedly, which means that it is probably corrupted."
+msgstr "%1$s 未如預期地結束, 這表示它大概已經損毀了."
+
+#: src/Buffer.cpp:1290
+#, c-format
+msgid "%1$s is not a readable LyX document."
+msgstr "%1$s 並非 LyX 可讀的文件."
+
+#: src/Buffer.cpp:1317
+msgid "Conversion failed"
+msgstr "轉換失敗"
+
+#: src/Buffer.cpp:1318
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but a temporary file for converting "
+"it could not be created."
+msgstr "%1$s 是從不同版本的 LyX 而來, 但是無法建立用於轉換它的暫存檔."
+
+#: src/Buffer.cpp:1328
+msgid "Conversion script not found"
+msgstr "找不到轉換命令稿"
+
+#: src/Buffer.cpp:1329
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but the conversion script lyx2lyx "
+"could not be found."
+msgstr "%1$s 是來自不同版本的 LyX, 但是無法找到轉換命令稿 lyx2lyx."
+
+#: src/Buffer.cpp:1352 src/Buffer.cpp:1359
+msgid "Conversion script failed"
+msgstr "轉換命令稿失敗"
+
+#: src/Buffer.cpp:1353
+#, c-format
+msgid ""
+"%1$s is from an older version of LyX and the lyx2lyx script failed to "
+"convert it."
+msgstr "%1$s 是來自舊版的 LyX, 而且 lyx2lyx 命令稿無法轉換它."
+
+#: src/Buffer.cpp:1360
+#, c-format
+msgid ""
+"%1$s is from a newer version of LyX and the lyx2lyx script failed to convert "
+"it."
+msgstr "%1$s 是來自新版的 LyX, 而且 lyx2lyx 命令稿無法轉換它."
+
+#: src/Buffer.cpp:1439 src/Buffer.cpp:4769 src/Buffer.cpp:4862
+msgid "File is read-only"
+msgstr "檔案為唯讀檔"
+
+#: src/Buffer.cpp:1440
+#, c-format
+msgid "The file %1$s cannot be written because it is marked as read-only."
+msgstr "檔案 %1$s 無法寫入, 因為它標記為唯讀檔."
+
+#: src/Buffer.cpp:1449
+#, c-format
+msgid ""
+"Document %1$s has been externally modified. Are you sure you want to "
+"overwrite this file?"
+msgstr "文件 %1$s 已經由外部修改過. 您確定要覆寫該檔案嗎?"
+
+#: src/Buffer.cpp:1451
+msgid "Overwrite modified file?"
+msgstr "覆寫已修改檔案?"
+
+#: src/Buffer.cpp:1452 src/Exporter.cpp:50
+#: src/frontends/qt/GuiClipboard.cpp:247 src/frontends/qt/GuiView.cpp:2568
+#: src/frontends/qt/GuiView.cpp:2836 src/frontends/qt/GuiView.cpp:2939
+msgid "&Overwrite"
+msgstr "覆寫(&O)"
+
+#: src/Buffer.cpp:1517
+msgid "Backup failure"
+msgstr "備份失敗"
+
+#: src/Buffer.cpp:1518
+#, c-format
+msgid ""
+"Cannot create backup file %1$s.\n"
+"Please check whether the directory exists and is writable."
+msgstr ""
+"無法建立備份檔案 %1$s. \n"
+"請檢查目錄是否存在並且為可寫."
+
+#: src/Buffer.cpp:1554 src/Buffer.cpp:1565
+#, fuzzy
+msgid "Write failure"
+msgstr "chktex 失敗"
+
+#: src/Buffer.cpp:1555
+#, c-format
+msgid ""
+"The file has successfully been saved as:\n"
+" %1$s.\n"
+"But LyX could not move it to:\n"
+" %2$s.\n"
+"Your original file has been backed up to:\n"
+" %3$s"
+msgstr ""
+
+#: src/Buffer.cpp:1566
+#, c-format
+msgid ""
+"Cannot move saved file to:\n"
+" %1$s.\n"
+"But the file has successfully been saved as:\n"
+" %2$s."
+msgstr ""
+
+#: src/Buffer.cpp:1582
+#, c-format
+msgid "Saving document %1$s..."
+msgstr "正在儲存文件 %1$s..."
+
+#: src/Buffer.cpp:1597
+msgid " could not write file!"
+msgstr "無法寫入檔案!"
+
+#: src/Buffer.cpp:1605
+msgid " done."
+msgstr " 完成."
+
+#: src/Buffer.cpp:1620
+#, c-format
+msgid "LyX: Attempting to save document %1$s\n"
+msgstr "LyX: 試圖儲存文件 %1$s\n"
+
+#: src/Buffer.cpp:1630 src/Buffer.cpp:1643 src/Buffer.cpp:1657
+#, c-format
+msgid "Saved to %1$s. Phew.\n"
+msgstr "儲存到 %1$s. 呼!\n"
+
+#: src/Buffer.cpp:1633
+msgid "Save failed! Trying again...\n"
+msgstr "儲存失敗! 再試一次...\n"
+
+#: src/Buffer.cpp:1647
+msgid "Save failed! Trying yet again...\n"
+msgstr "儲存失敗! 並再試一次...\n"
+
+#: src/Buffer.cpp:1743
+msgid "Iconv software exception Detected"
+msgstr "Iconv 程式偵測到例外狀況"
+
+#: src/Buffer.cpp:1744
+#, c-format
+msgid ""
+"Please verify that the `iconv' support software is properly installed and "
+"supports the selected encoding (%1$s), or change the encoding in "
+"Document>Settings>Language."
+msgstr ""
+
+#: src/Buffer.cpp:1776
+#, fuzzy, c-format
+msgid "Uncodable character '%1$s' (code point %2$s)"
+msgstr "無法找到 LaTeX 命令字元 '%1$s' (code point %2$s)"
+
+#: src/Buffer.cpp:1779
+#, fuzzy
+msgid ""
+"Some characters of your document are not representable in specific verbatim "
+"contexts.\n"
+"Changing the document encoding to utf8 could help."
+msgstr ""
+"您的文件中某些字元, 可能無法以所選編碼來表現. \n"
+"變更文件編碼為 utf8 可能會有幫助."
+
+#: src/Buffer.cpp:1784
+#, c-format
+msgid "Could not find LaTeX command for character '%1$s' (code point %2$s)"
+msgstr "無法找到 LaTeX 命令字元 '%1$s' (code point %2$s)"
+
+#: src/Buffer.cpp:1787
+msgid ""
+"Some characters of your document are probably not representable in the "
+"chosen encoding.\n"
+"Changing the document encoding to utf8 could help."
+msgstr ""
+"您的文件中某些字元, 可能無法以所選編碼來表現. \n"
+"變更文件編碼為 utf8 可能會有幫助."
+
+#: src/Buffer.cpp:1795
+msgid "iconv conversion failed"
+msgstr "iconv 轉換失敗"
+
+#: src/Buffer.cpp:1800
+msgid "conversion failed"
+msgstr "轉換失敗"
+
+#: src/Buffer.cpp:1911
+msgid "Uncodable character in file path"
+msgstr "檔案路徑中有無法解析的字元"
+
+#: src/Buffer.cpp:1913
+#, c-format
+msgid ""
+"The path of your document\n"
+"(%1$s)\n"
+"contains glyphs that are unknown in the current document encoding (namely "
+"%2$s). This may result in incomplete output, unless TEXINPUTS contains the "
+"document directory and you don't use explicitly relative paths (i.e., paths "
+"starting with './' or '../') in the preamble or in ERT.\n"
+"\n"
+"In case of problems, choose an appropriate document encoding\n"
+"(such as utf8) or change the file path name."
+msgstr ""
+"您文件的路徑\n"
+"(%1$s)\n"
+"包含了目前文件編碼 (也就是 %2$s) 無法解析的字符, 這可能會造成文件無法成功輸"
+"出. 除非 TEXINPUTS 包含了文件目錄, 而且您沒在 前文區 或 ERT 明確地使用相對路"
+"徑 (亦即, 以 './' 或 '../' 為開頭的路徑) \n"
+"\n"
+"為了防止出錯, 請選擇適當的文件編碼 (例如 utf8)\n"
+"或變更文件的路徑名稱."
+
+#: src/Buffer.cpp:1995
+#, c-format
+msgid "The languages %1$s are only supported by Babel."
+msgstr ""
+
+#: src/Buffer.cpp:1996
+#, c-format
+msgid "The language %1$s is only supported by Babel."
+msgstr ""
+
+#: src/Buffer.cpp:2006
+#, c-format
+msgid "The languages %1$s are only supported by Polyglossia."
+msgstr ""
+
+#: src/Buffer.cpp:2007
+#, c-format
+msgid "The language %1$s is only supported by Polyglossia."
+msgstr ""
+
+#: src/Buffer.cpp:2013
+#, fuzzy
+msgid "Incompatible Languages!"
+msgstr "不適當的命令名稱."
+
+#: src/Buffer.cpp:2015
+#, c-format
+msgid ""
+"You cannot use the following languages together in one LaTeX document "
+"because they require conflicting language packages:\n"
+"%1$s%2$s"
+msgstr ""
+
+#: src/Buffer.cpp:2343
+msgid "Running chktex..."
+msgstr "chktex 執行中..."
+
+#: src/Buffer.cpp:2362
+msgid "chktex failure"
+msgstr "chktex 失敗"
+
+#: src/Buffer.cpp:2363
+msgid "Could not run chktex successfully."
+msgstr "無法成功運行 chktex."
+
+#: src/Buffer.cpp:2734
+#, c-format
+msgid "Don't know how to export to format: %1$s"
+msgstr "不知如何匯出格式: %1$s"
+
+#: src/Buffer.cpp:2838
+#, c-format
+msgid "Error exporting to format: %1$s."
+msgstr "匯出格式: %1$s 發生錯誤."
+
+#: src/Buffer.cpp:2847
+msgid "Error generating literate programming code."
+msgstr "產生 文學(literate)程式碼 時發生錯誤."
+
+#: src/Buffer.cpp:2923
+#, c-format
+msgid "Branch \"%1$s\" does not exist."
+msgstr "分支 \"%1$s\" 不存在."
+
+#: src/Buffer.cpp:2956
+#, c-format
+msgid "Branch \"%1$s\" already exists."
+msgstr "分支 \"%1$s\" 已存在."
+
+#: src/Buffer.cpp:3013
+#, fuzzy
+msgid "Error viewing the output file."
+msgstr "複製緩衝區時發生錯誤."
+
+#: src/Buffer.cpp:3378 src/frontends/qt/GuiView.cpp:2397
+#: src/frontends/qt/Validator.cpp:222 src/insets/ExternalSupport.cpp:395
+#: src/insets/InsetGraphics.cpp:690 src/insets/InsetInclude.cpp:596
+msgid "Invalid filename"
+msgstr "無效檔名"
+
+#: src/Buffer.cpp:3379 src/insets/ExternalSupport.cpp:396
+#: src/insets/InsetGraphics.cpp:691 src/insets/InsetInclude.cpp:597
+msgid ""
+"The following filename will cause troubles when running the exported file "
+"through LaTeX: "
+msgstr "透過 LaTeX 執行匯出檔案時, 下列檔名似乎會造成麻煩: "
+
+#: src/Buffer.cpp:3384 src/insets/ExternalSupport.cpp:401
+#: src/insets/InsetGraphics.cpp:698 src/insets/InsetInclude.cpp:601
+msgid "Problematic filename for DVI"
+msgstr "對 DVI 有問題的檔案名"
+
+#: src/Buffer.cpp:3385 src/insets/ExternalSupport.cpp:402
+#: src/insets/InsetGraphics.cpp:699 src/insets/InsetInclude.cpp:602
+msgid ""
+"The following filename can cause troubles when running the exported file "
+"through LaTeX and opening the resulting DVI: "
+msgstr ""
+"透過 LaTeX 執行匯出檔案並且開啟執行結果 DVI 時, 下列檔名似乎會造成麻煩: "
+
+#: src/Buffer.cpp:3424 src/insets/InsetBibtex.cpp:335
+msgid "Export Warning!"
+msgstr "匯出警告!"
+
+#: src/Buffer.cpp:3425
+msgid ""
+"There are spaces in the paths to your BibTeX databases.\n"
+"BibTeX will be unable to find them."
+msgstr ""
+"在到您的 BibTeX 資料庫路徑中有些空格. \n"
+"BibTeX 將無法找到它們."
+
+#: src/Buffer.cpp:4065
+#, c-format
+msgid "Preview source code for paragraph %1$d"
+msgstr "預覽段落 %1$d 原始碼"
+
+#: src/Buffer.cpp:4069
+#, c-format
+msgid "Preview source code from paragraph %1$s to %2$s"
+msgstr "預覽從段落 %1$s 到 %2$s 的原始碼"
+
+#: src/Buffer.cpp:4121
+msgid "Preview source code"
+msgstr "預覽原始碼"
+
+#: src/Buffer.cpp:4123
+msgid "Preview preamble"
+msgstr "預覽前文"
+
+#: src/Buffer.cpp:4125
+msgid "Preview body"
+msgstr "預覽內文"
+
+#: src/Buffer.cpp:4140
+msgid "Plain text does not have a preamble."
+msgstr "純文字沒有前文."
+
+#: src/Buffer.cpp:4245
+#, c-format
+msgid "Auto-saving %1$s"
+msgstr "自動儲存 %1$s"
+
+#: src/Buffer.cpp:4301
+msgid "Autosave failed!"
+msgstr "自動儲存失敗!"
+
+#: src/Buffer.cpp:4362
+msgid "Autosaving current document..."
+msgstr "自動儲存目前文件..."
+
+#: src/Buffer.cpp:4484
+#, c-format
+msgid "No information for exporting the format %1$s."
+msgstr "沒有資訊用於匯出格式 %1$s."
+
+#: src/Buffer.cpp:4488
+#, c-format
+msgid "Hint: use non-TeX fonts or set input encoding to '%1$s'"
+msgstr ""
+
+#: src/Buffer.cpp:4490
+msgid "Couldn't export file"
+msgstr "無法匯出檔案"
+
+#: src/Buffer.cpp:4557 src/frontends/qt/GuiView.cpp:2541
+msgid "File name error"
+msgstr "檔案名稱錯誤"
+
+#: src/Buffer.cpp:4558
+#, c-format
+msgid ""
+"The directory path to the document\n"
+"%1$s\n"
+"contains spaces, but your TeX installation does not allow them. You should "
+"save the file to a directory whose name does not contain spaces."
+msgstr ""
+
+#: src/Buffer.cpp:4646 src/Buffer.cpp:4676 src/frontends/qt/GuiView.cpp:752
+msgid "Document export cancelled."
+msgstr "文件匯出取消."
+
+#: src/Buffer.cpp:4679
+#, c-format
+msgid "Document exported as %1$s to file `%2$s'"
+msgstr "文件匯出為 %1$s 到檔案「%2$s」"
+
+#: src/Buffer.cpp:4686
+#, c-format
+msgid "Document exported as %1$s"
+msgstr "文件匯出為 %1$s"
+
+#: src/Buffer.cpp:4755
+#, c-format
+msgid ""
+"An emergency save of the document %1$s exists.\n"
+"\n"
+"Recover emergency save?"
+msgstr ""
+"存在緊急儲存的文件 %1$s. \n"
+"\n"
+"回復緊急儲存?"
+
+#: src/Buffer.cpp:4758
+msgid "Load emergency save?"
+msgstr "載入緊急儲存?"
+
+#: src/Buffer.cpp:4759
+msgid "&Recover"
+msgstr "回復(&R)"
+
+#: src/Buffer.cpp:4759
+msgid "&Load Original"
+msgstr "載入原始檔(&L)"
+
+#: src/Buffer.cpp:4770
+#, c-format
+msgid ""
+"An emergency file is successfully loaded, but the original file %1$s is "
+"marked read-only. Please make sure to save the document as a different file."
+msgstr ""
+"已經成功地載入緊急檔, 且原始檔案 %1$s 已標示為 唯讀檔. 請確保此檔案儲存為另外"
+"一個不同的檔案."
+
+#: src/Buffer.cpp:4777
+msgid "Document was successfully recovered."
+msgstr "文件回復成功."
+
+#: src/Buffer.cpp:4779
+msgid "Document was NOT successfully recovered."
+msgstr "文件「沒有」回復成功."
+
+#: src/Buffer.cpp:4780
+#, c-format
+msgid ""
+"Remove emergency file now?\n"
+"(%1$s)"
+msgstr ""
+"現在移除緊急檔?\n"
+"(%1$s)"
+
+#: src/Buffer.cpp:4784 src/Buffer.cpp:4796
+msgid "Delete emergency file?"
+msgstr "刪除緊急檔?"
+
+#: src/Buffer.cpp:4785 src/Buffer.cpp:4798
+msgid "&Keep"
+msgstr "保留(&K)"
+
+#: src/Buffer.cpp:4789
+msgid "Emergency file deleted"
+msgstr "緊急檔已刪除"
+
+#: src/Buffer.cpp:4790
+msgid "Do not forget to save your file now!"
+msgstr "現在別忘了儲存您的檔案"
+
+#: src/Buffer.cpp:4797
+msgid "Remove emergency file now?"
+msgstr "現在移除緊急檔?"
+
+#: src/Buffer.cpp:4820
+#, fuzzy
+msgid "Can't rename emergency file!"
+msgstr "刪除緊急檔?"
+
+#: src/Buffer.cpp:4821
+msgid ""
+"LyX was unable to rename the emergency file. You should do so manually. "
+"Otherwise, you will be asked about it again the next time you try to load "
+"this file, and may over-write your own work."
+msgstr ""
+
+#: src/Buffer.cpp:4826
+#, fuzzy
+msgid "Emergency File Renames"
+msgstr "緊急檔已刪除"
+
+#: src/Buffer.cpp:4827
+#, fuzzy, c-format
+msgid ""
+"Emergency file renamed as:\n"
+" %1$s"
+msgstr "緊急檔已刪除"
+
+#: src/Buffer.cpp:4850
+#, c-format
+msgid ""
+"The backup of the document %1$s is newer.\n"
+"\n"
+"Load the backup instead?"
+msgstr ""
+"備份的文件 %1$s 較新. \n"
+"\n"
+"載入備份做為替代?"
+
+#: src/Buffer.cpp:4852
+msgid "Load backup?"
+msgstr "載入備份?"
+
+#: src/Buffer.cpp:4853
+msgid "&Load backup"
+msgstr "載入備份(&L)"
+
+#: src/Buffer.cpp:4853
+msgid "Load &original"
+msgstr "載入原始檔(&o)"
+
+#: src/Buffer.cpp:4863
+#, c-format
+msgid ""
+"A backup file is successfully loaded, but the original file %1$s is marked "
+"read-only. Please make sure to save the document as a different file."
+msgstr ""
+"已經成功地載入備份檔, 且原始檔案 %1$s 已標示為 唯讀檔. 請確保此檔案儲存為另外"
+"一個不同的檔案."
+
+#: src/Buffer.cpp:5255 src/insets/InsetCaption.cpp:392
+msgid "Senseless!!! "
+msgstr "無意義!!! "
+
+#: src/Buffer.cpp:5480
+#, c-format
+msgid "Document %1$s reloaded."
+msgstr "文件 %1$s 已重新載入."
+
+#: src/Buffer.cpp:5483
+#, c-format
+msgid "Could not reload document %1$s."
+msgstr "無法讀取文件 %1$s."
+
+#: src/BufferParams.cpp:511
+msgid ""
+"The LaTeX package amsmath is only used if AMS formula types or symbols from "
+"the AMS math toolbars are inserted into formulas"
+msgstr "只有在文章中插入 AMS 公式類型或符號, amsmath 套件才會載入"
+
+#: src/BufferParams.cpp:513
+msgid ""
+"The LaTeX package amssymb is only used if symbols from the AMS math toolbars "
+"are inserted into formulas"
+msgstr "只有在文章中插入 AMS 的數學符號, amssymb 套件才會載入"
+
+#: src/BufferParams.cpp:515
+msgid ""
+"The LaTeX package cancel is only used if \\cancel commands are used in "
+"formulas"
+msgstr "只有在文章中插入 \\cancel 等命令時, cancel 套件才會載入"
+
+#: src/BufferParams.cpp:517
+msgid ""
+"The LaTeX package esint is only used if special integral symbols are "
+"inserted into formulas"
+msgstr "只有在文章中插入 特殊的積分符號時, esint 套件才會載入"
+
+#: src/BufferParams.cpp:519
+msgid ""
+"The LaTeX package mathdots is only used if the command \\iddots is inserted "
+"into formulas"
+msgstr "只有在文章中插入 \\iddots 等命令時, mathdots 套件才會載入"
+
+#: src/BufferParams.cpp:521
+msgid ""
+"The LaTeX package mathtools is only used if some mathematical relations are "
+"inserted into formulas"
+msgstr "只有在文章中插入一些數學的關係符號命令時, mathtools 套件才會載入"
+
+#: src/BufferParams.cpp:523
+msgid ""
+"The LaTeX package mhchem is only used if either the command \\ce or \\cf is "
+"inserted into formulas"
+msgstr ""
+"只有在文章中插入 \\ce 或 \\cf 等命令時, mhchem 套件才會載入. (在數學模式中寫"
+"化學式)"
+
+#: src/BufferParams.cpp:525
+msgid ""
+"The LaTeX package stackrel is only used if the command \\stackrel with "
+"subscript is inserted into formulas"
+msgstr "只有在文章中插入 \\stackrel 等命令時, stackrel 套件才會載入"
+
+#: src/BufferParams.cpp:527
+msgid ""
+"The LaTeX package stmaryrd is only used if symbols from the St Mary's Road "
+"symbol font for theoretical computer science are inserted into formulas"
+msgstr ""
+"只有在文章中插入來自 St Mary's Road 的理論電腦科學符號時, stmaryrd 套件才會載"
+"入"
+
+#: src/BufferParams.cpp:529
+msgid ""
+"The LaTeX package undertilde is only used if you use the math frame "
+"decoration 'utilde'"
+msgstr ""
+"只有在文章中插入「框架裝飾」內的 'utilde' 圖案時，undertilde 套件才會載入"
+
+#: src/BufferParams.cpp:734
+#, c-format
+msgid ""
+"The selected document class\n"
+"\t%1$s\n"
+"requires external files that are not available.\n"
+"The document class can still be used, but the\n"
+"document cannot be compiled until the following\n"
+"prerequisites are installed:\n"
+"\t%2$s\n"
+"See section 3.1.2.2 (Class Availability) of the\n"
+"User's Guide for more information."
+msgstr ""
+"選擇的文件類別\n"
+"\t%1$s\n"
+"需要額外的檔案, 但卻找不到該檔案. \n"
+"此文件類別依然可以使用, 但是文件無法編譯輸出.\n"
+"除非安裝了下列所需的檔案:\n"
+"\t%2$s\n"
+"請參考「使用者指南-基礎」3.1.2.2 節(Class Availability)\n"
+"的內容以獲取更多資訊."
+
+#: src/BufferParams.cpp:743
+msgid "Document class not available"
+msgstr "文件類別無法使用"
+
+#: src/BufferParams.cpp:2216 src/Encoding.cpp:253 src/Paragraph.cpp:2725
+#: src/frontends/qt/LaTeXHighlighter.cpp:122
+#: src/insets/InsetCommandParams.cpp:503 src/insets/InsetCommandParams.cpp:511
+#: src/insets/InsetListings.cpp:300 src/insets/InsetListings.cpp:308
+#: src/insets/InsetListings.cpp:331 src/mathed/MathExtern.cpp:1440
+#: src/mathed/MathExtern.cpp:1514
+msgid "LyX Warning: "
+msgstr "LyX 警告: "
+
+#: src/BufferParams.cpp:2217 src/Encoding.cpp:254 src/Paragraph.cpp:2726
+#: src/insets/InsetCommandParams.cpp:504 src/insets/InsetCommandParams.cpp:512
+#: src/insets/InsetListings.cpp:301 src/insets/InsetListings.cpp:309
+#: src/mathed/MathExtern.cpp:1441 src/mathed/MathExtern.cpp:1515
+msgid "uncodable character"
+msgstr "無法編碼的字元"
+
+#: src/BufferParams.cpp:2230
+#, fuzzy
+msgid "Uncodable character in user preamble"
+msgstr "作者名稱內含有無法編碼的字元"
+
+#: src/BufferParams.cpp:2232
+#, fuzzy, c-format
+msgid ""
+"The user preamble of your document contains glyphs that are unknown in the "
+"current document encoding (namely %1$s).\n"
+"These glyphs are omitted from the output, which may result in incomplete "
+"output.\n"
+"\n"
+"Please select an appropriate document encoding\n"
+"(such as utf8) or change the preamble code accordingly."
+msgstr ""
+"作者的姓名 '%1$s',\n"
+"用於變更追蹤時, 因包含了目前文件編碼 (%2$s) 無法解析的字符,\n"
+"文件輸出時將會忽略這些字符. \n"
+"\n"
+"請選擇適當的文件編碼 (例如 utf8) 或改變作者的名字."
+
+#: src/BufferParams.cpp:2546
+#, c-format
+msgid ""
+"The layout file:\n"
+"%1$s\n"
+"could not be found. A default textclass with default\n"
+"layouts will be used. LyX will not be able to produce\n"
+"correct output."
+msgstr ""
+"布局檔:\n"
+"%1$s\n"
+"找不到.\n"
+"將會使用預設的布局,以及預設的文字類別. \n"
+"LyX 將無法正確輸出文件."
+
+#: src/BufferParams.cpp:2552
+msgid "Document class not found"
+msgstr "找不到文件類別"
+
+#: src/BufferParams.cpp:2559
+#, c-format
+msgid ""
+"Due to some error in it, the layout file:\n"
+"%1$s\n"
+"could not be loaded. A default textclass with default\n"
+"layouts will be used. LyX will not be able to produce\n"
+"correct output."
+msgstr ""
+"由於一些內在的錯誤, 布局檔:\n"
+"%1$s\n"
+"無法讀取.\n"
+"將會使用預設的布局,以及預設的文字類別. \n"
+"LyX 將無法正確輸出文件."
+
+#: src/BufferParams.cpp:2565 src/BufferView.cpp:1357 src/BufferView.cpp:1389
+msgid "Could not load class"
+msgstr "無法載入類別"
+
+#: src/BufferParams.cpp:2612
+msgid "Error reading internal layout information"
+msgstr "讀取內部布局資訊錯誤"
+
+#: src/BufferParams.cpp:2613 src/TextClass.cpp:1851 src/TextClass.cpp:1883
+msgid "Read Error"
+msgstr "讀取錯誤"
+
+#: src/BufferView.cpp:195
+msgid "No more insets"
+msgstr "沒有更多嵌框"
+
+#: src/BufferView.cpp:815
+msgid "Save bookmark"
+msgstr "儲存書籤"
+
+#: src/BufferView.cpp:1031
+msgid "Converting document to new document class..."
+msgstr "轉換文件到新文件類別..."
+
+#: src/BufferView.cpp:1076
+msgid "Document is read-only"
+msgstr "文件為唯讀"
+
+#: src/BufferView.cpp:1078
+msgid "Document has been modified externally"
+msgstr ""
+
+#: src/BufferView.cpp:1087
+msgid "This portion of the document is deleted."
+msgstr "此部份的文件已刪除."
+
+#: src/BufferView.cpp:1130 src/BufferView.cpp:2152
+#: src/frontends/qt/GuiView.cpp:3991 src/frontends/qt/GuiView.cpp:4078
+msgid "Absolute filename expected."
+msgstr "預期為絕對路徑的檔名."
+
+#: src/BufferView.cpp:1355 src/BufferView.cpp:1387
+#, c-format
+msgid "The document class `%1$s' could not be loaded."
+msgstr "無法讀取文件類別「%1$s」."
+
+#: src/BufferView.cpp:1413
+msgid "No further undo information"
+msgstr "無進一步的復原資訊"
+
+#: src/BufferView.cpp:1433
+msgid "No further redo information"
+msgstr "無進一步的重做資訊"
+
+#: src/BufferView.cpp:1659
+msgid "Mark off"
+msgstr "標記關閉"
+
+#: src/BufferView.cpp:1665
+msgid "Mark on"
+msgstr "標記開啟"
+
+#: src/BufferView.cpp:1672
+msgid "Mark removed"
+msgstr "標記移除"
+
+#: src/BufferView.cpp:1675
+msgid "Mark set"
+msgstr "標記設定"
+
+#: src/BufferView.cpp:1766
+msgid "Statistics for the selection:"
+msgstr "選取區域的統計資訊:"
+
+#: src/BufferView.cpp:1768
+msgid "Statistics for the document:"
+msgstr "文件的統計資訊:"
+
+#: src/BufferView.cpp:1771
+#, c-format
+msgid "%1$d words"
+msgstr "%1$d 個字"
+
+#: src/BufferView.cpp:1773
+msgid "One word"
+msgstr "一個字"
+
+#: src/BufferView.cpp:1776
+#, c-format
+msgid "%1$d characters (including blanks)"
+msgstr "%1$d 個字元 (包括空白)"
+
+#: src/BufferView.cpp:1779
+msgid "One character (including blanks)"
+msgstr "一個字元 (包括空白)"
+
+#: src/BufferView.cpp:1782
+#, c-format
+msgid "%1$d characters (excluding blanks)"
+msgstr "%1$d 個字元 (不包括空白)"
+
+#: src/BufferView.cpp:1785
+msgid "One character (excluding blanks)"
+msgstr "一個字元 (不包括空白)"
+
+#: src/BufferView.cpp:1787
+msgid "Statistics"
+msgstr "統計資訊"
+
+#: src/BufferView.cpp:2010
+#, c-format
+msgid ""
+"`inset-forall' interrupted because number of actions is larger than %1$d"
+msgstr "因為動作數量已超過 %1$d 個, `inset-forall' 中斷"
+
+#: src/BufferView.cpp:2012
+#, c-format
+msgid "Applied \"%1$s\" to %2$d insets"
+msgstr "已套用「%1$s」到 %2$d 個嵌框"
+
+#: src/BufferView.cpp:2020
+msgid "Branch name"
+msgstr "分支名稱"
+
+#: src/BufferView.cpp:2027 src/frontends/qt/GuiBranches.cpp:218
+msgid "Branch already exists"
+msgstr "分支已存在"
+
+#: src/BufferView.cpp:2899
+#, c-format
+msgid "Inserting document %1$s..."
+msgstr "插入文件 %1$s..."
+
+#: src/BufferView.cpp:2914
+#, c-format
+msgid "Document %1$s inserted."
+msgstr "文件 %1$s 已插入."
+
+#: src/BufferView.cpp:2916
+#, c-format
+msgid "Could not insert document %1$s"
+msgstr "無法插入文件 %1$s"
+
+#: src/BufferView.cpp:3319
+#, c-format
+msgid ""
+"Could not read the specified document\n"
+"%1$s\n"
+"due to the error: %2$s"
+msgstr ""
+"無法讀取指定的文件\n"
+"%1$s\n"
+"由於錯誤:%2$s"
+
+#: src/BufferView.cpp:3321
+msgid "Could not read file"
+msgstr "無法讀取檔案"
+
+#: src/BufferView.cpp:3328
+#, c-format
+msgid ""
+"%1$s\n"
+" is not readable."
+msgstr "%1$s 無法讀取."
+
+#: src/BufferView.cpp:3329 src/output.cpp:39
+msgid "Could not open file"
+msgstr "無法開啟檔案"
+
+#: src/BufferView.cpp:3336
+msgid "Reading not UTF-8 encoded file"
+msgstr "讀取非 UTF-8 編碼的檔案"
+
+#: src/BufferView.cpp:3337
+msgid ""
+"The file is not UTF-8 encoded.\n"
+"It will be read as local 8Bit-encoded.\n"
+"If this does not give the correct result\n"
+"then please change the encoding of the file\n"
+"to UTF-8 with a program other than LyX.\n"
+msgstr ""
+"檔案並非 UTF-8 編碼, \n"
+"它將以本地的 8 位元編碼來讀取. \n"
+"如果這樣得不到正確結果, \n"
+"就請以 LyX 以外的程式, \n"
+"將檔案的編碼變更為 UTF-8. \n"
+
+#: src/Changes.cpp:370
+msgid "Uncodable character in author name"
+msgstr "作者名稱內含有無法編碼的字元"
+
+#: src/Changes.cpp:371
+#, c-format
+msgid ""
+"The author name '%1$s',\n"
+"used for change tracking, contains the following glyphs that\n"
+"cannot be represented in the current encoding: %2$s.\n"
+"These glyphs will be omitted in the exported LaTeX file.\n"
+"\n"
+"Choose an appropriate document encoding (such as utf8)\n"
+"or change the spelling of the author name."
+msgstr ""
+"作者的姓名 '%1$s',\n"
+"用於變更追蹤時, 因包含了目前文件編碼 (%2$s) 無法解析的字符,\n"
+"文件輸出時將會忽略這些字符. \n"
+"\n"
+"請選擇適當的文件編碼 (例如 utf8) 或改變作者的名字."
+
+#: src/Chktex.cpp:65
+#, fuzzy, c-format
+msgid "ChkTeX warning id # %1$s"
+msgstr "ChkTeX 警告識別號 # %1$d"
+
+#: src/Color.cpp:203 src/insets/InsetBibtex.cpp:187
+#: src/insets/InsetBibtex.cpp:206
+msgid "none"
+msgstr "無"
+
+#: src/Color.cpp:204
+msgid "black"
+msgstr "黑色"
+
+#: src/Color.cpp:205
+msgid "white"
+msgstr "白色"
+
+#: src/Color.cpp:206
+msgid "blue"
+msgstr "藍色"
+
+#: src/Color.cpp:207
+#, fuzzy
+msgid "brown"
+msgstr "frown"
+
+#: src/Color.cpp:208
+msgid "cyan"
+msgstr "青色"
+
+#: src/Color.cpp:209
+msgid "darkgray"
+msgstr ""
+
+#: src/Color.cpp:210
+#, fuzzy
+msgid "gray"
+msgstr "Svgraybox"
+
+#: src/Color.cpp:211
+msgid "green"
+msgstr "綠色"
+
+#: src/Color.cpp:212
+#, fuzzy
+msgid "lightgray"
+msgstr "lightning"
+
+#: src/Color.cpp:213
+msgid "lime"
+msgstr ""
+
+#: src/Color.cpp:214
+msgid "magenta"
+msgstr "洋紅"
+
+#: src/Color.cpp:215
+msgid "olive"
+msgstr ""
+
+#: src/Color.cpp:216
+#, fuzzy
+msgid "orange"
+msgstr "列印範圍"
+
+#: src/Color.cpp:217
+msgid "pink"
+msgstr ""
+
+#: src/Color.cpp:218
+msgid "purple"
+msgstr ""
+
+#: src/Color.cpp:219
+msgid "red"
+msgstr "紅色"
+
+#: src/Color.cpp:220
+msgid "teal"
+msgstr ""
+
+#: src/Color.cpp:221
+msgid "violet"
+msgstr ""
+
+#: src/Color.cpp:222
+msgid "yellow"
+msgstr "黃色"
+
+#: src/Color.cpp:223
+msgid "cursor"
+msgstr "游標"
+
+#: src/Color.cpp:224
+msgid "background"
+msgstr "背景"
+
+#: src/Color.cpp:225
+msgid "text"
+msgstr "文字"
+
+#: src/Color.cpp:226
+msgid "selection"
+msgstr "選擇"
+
+#: src/Color.cpp:227
+msgid "selected text"
+msgstr "選擇的文字"
+
+#: src/Color.cpp:229
+msgid "LaTeX text"
+msgstr "LaTeX 文字"
+
+#: src/Color.cpp:230
+msgid "inline completion"
+msgstr "行內自動完成"
+
+#: src/Color.cpp:232
+msgid "non-unique inline completion"
+msgstr "非獨特的行內自動完成"
+
+#: src/Color.cpp:234
+msgid "previewed snippet"
+msgstr "預覽的片段"
+
+#: src/Color.cpp:235
+msgid "note label"
+msgstr "註記標籤"
+
+#: src/Color.cpp:236
+msgid "note background"
+msgstr "註記背景"
+
+#: src/Color.cpp:237
+msgid "comment label"
+msgstr "註釋標籤"
+
+#: src/Color.cpp:238
+msgid "comment background"
+msgstr "註釋背景"
+
+#: src/Color.cpp:239
+msgid "greyedout inset label"
+msgstr "灰色顯示 嵌框標籤"
+
+#: src/Color.cpp:240
+msgid "greyedout inset text"
+msgstr "灰色顯示 嵌框文字"
+
+#: src/Color.cpp:241
+msgid "greyedout inset background"
+msgstr "灰色顯示 嵌框背景"
+
+#: src/Color.cpp:242
+msgid "phantom inset text"
+msgstr "佔位符 嵌框文字"
+
+#: src/Color.cpp:243
+msgid "shaded box"
+msgstr "背景著色方框"
+
+#: src/Color.cpp:244
+msgid "listings background"
+msgstr "程式碼列表 背景"
+
+#: src/Color.cpp:245
+msgid "branch label"
+msgstr "分支 標籤"
+
+#: src/Color.cpp:246
+msgid "footnote label"
+msgstr "註腳 標籤"
+
+#: src/Color.cpp:247
+msgid "index label"
+msgstr "索引 標籤"
+
+#: src/Color.cpp:248
+msgid "margin note label"
+msgstr "邊界註記 標籤"
+
+#: src/Color.cpp:249
+msgid "URL label"
+msgstr "URL 標籤"
+
+#: src/Color.cpp:250
+msgid "URL text"
+msgstr "URL 文字"
+
+#: src/Color.cpp:251
+msgid "depth bar"
+msgstr "深度滑桿"
+
+#: src/Color.cpp:252
+#, fuzzy
+msgid "scroll indicator"
+msgstr "游標處提示(&n)"
+
+#: src/Color.cpp:253
+msgid "language"
+msgstr "語言"
+
+#: src/Color.cpp:254
+msgid "command inset"
+msgstr "命令嵌框"
+
+#: src/Color.cpp:255
+msgid "command inset background"
+msgstr "命令嵌框 背景"
+
+#: src/Color.cpp:256
+msgid "command inset frame"
+msgstr "命令嵌框 框架"
+
+#: src/Color.cpp:257
+msgid "special character"
+msgstr "特殊字元"
+
+#: src/Color.cpp:258
+msgid "math"
+msgstr "數學"
+
+#: src/Color.cpp:259
+msgid "math background"
+msgstr "數學 背景"
+
+#: src/Color.cpp:260
+msgid "graphics background"
+msgstr "圖形 背景"
+
+#: src/Color.cpp:261 src/Color.cpp:265
+msgid "math macro background"
+msgstr "數學巨集 背景"
+
+#: src/Color.cpp:262
+msgid "math frame"
+msgstr "數學 框架"
+
+#: src/Color.cpp:263
+msgid "math corners"
+msgstr "數學 邊角"
+
+#: src/Color.cpp:264
+msgid "math line"
+msgstr "數學 線段"
+
+#: src/Color.cpp:266
+msgid "math macro hovered background"
+msgstr "數學巨集 游標在上時背景"
+
+#: src/Color.cpp:267
+msgid "math macro label"
+msgstr "數學巨集 標籤"
+
+#: src/Color.cpp:268
+msgid "math macro frame"
+msgstr "數學巨集 框架"
+
+#: src/Color.cpp:269
+msgid "math macro blended out"
+msgstr "數學巨集 blended out"
+
+#: src/Color.cpp:270
+msgid "math macro old parameter"
+msgstr "數學巨集 舊參數"
+
+#: src/Color.cpp:271
+msgid "math macro new parameter"
+msgstr "數學巨集 新參數"
+
+#: src/Color.cpp:272
+#, fuzzy
+msgid "collapsible inset text"
+msgstr "可摺疊 嵌框 文字"
+
+#: src/Color.cpp:273
+#, fuzzy
+msgid "collapsible inset frame"
+msgstr "可摺疊 嵌框 框架"
+
+#: src/Color.cpp:274
+msgid "inset background"
+msgstr "嵌框 背景"
+
+#: src/Color.cpp:275
+msgid "inset frame"
+msgstr "嵌框 框架"
+
+#: src/Color.cpp:276
+msgid "LaTeX error"
+msgstr "LaTeX 錯誤"
+
+#: src/Color.cpp:277
+msgid "end-of-line marker"
+msgstr "列尾標誌"
+
+#: src/Color.cpp:278
+msgid "appendix marker"
+msgstr "附錄標誌"
+
+#: src/Color.cpp:279
+msgid "change bar"
+msgstr "變更滑桿"
+
+#: src/Color.cpp:280
+msgid "deleted text"
+msgstr "刪除的文字"
+
+#: src/Color.cpp:281
+msgid "added text"
+msgstr "加入的文字"
+
+#: src/Color.cpp:282
+msgid "changed text 1st author"
+msgstr "第1位作者變更的文字"
+
+#: src/Color.cpp:283
+msgid "changed text 2nd author"
+msgstr "第2位作者變更的文字"
+
+#: src/Color.cpp:284
+msgid "changed text 3rd author"
+msgstr "第3位作者變更的文字"
+
+#: src/Color.cpp:285
+msgid "changed text 4th author"
+msgstr "第4位作者變更的文字"
+
+#: src/Color.cpp:286
+msgid "changed text 5th author"
+msgstr "第5位作者變更的文字"
+
+#: src/Color.cpp:287
+msgid "deleted text modifier"
+msgstr "刪除的文字 modifier"
+
+#: src/Color.cpp:288
+msgid "added space markers"
+msgstr "加入的空格標誌"
+
+#: src/Color.cpp:289
+msgid "table line"
+msgstr "表格線"
+
+#: src/Color.cpp:290
+msgid "table on/off line"
+msgstr "表格 開/關 線"
+
+#: src/Color.cpp:292
+msgid "bottom area"
+msgstr "底部區域"
+
+#: src/Color.cpp:293
+msgid "new page"
+msgstr "新頁面"
+
+#: src/Color.cpp:294
+msgid "page break / line break"
+msgstr "分頁 / 斷行"
+
+#: src/Color.cpp:295
+#, fuzzy
+msgid "button frame"
+msgstr "無外框"
+
+#: src/Color.cpp:296
+msgid "button background"
+msgstr "按鈕背景"
+
+#: src/Color.cpp:297
+msgid "button background under focus"
+msgstr "焦點之下的按鈕背景"
+
+#: src/Color.cpp:298
+msgid "paragraph marker"
+msgstr "段落標記符號"
+
+#: src/Color.cpp:299
+msgid "preview frame"
+msgstr "預覽框"
+
+#: src/Color.cpp:300
+msgid "inherit"
+msgstr "繼承"
+
+#: src/Color.cpp:301
+msgid "regexp frame"
+msgstr "正規表示式框"
+
+#: src/Color.cpp:302
+msgid "ignore"
+msgstr "忽略"
+
+#: src/Converter.cpp:310
+#, c-format
+msgid ""
+"<p>The following LaTeX backend has been configured to allow execution of "
+"external programs for any document:</p><center><p><tt>%1$s</tt></p></"
+"center><p>This is a dangerous configuration. Please, consider using the "
+"support offered by LyX for allowing this privilege only to documents that "
+"actually need it, instead.</p>"
+msgstr ""
+
+#: src/Converter.cpp:319
+#, fuzzy
+msgid "Security Warning"
+msgstr "下個警告訊息(&W)"
+
+#: src/Converter.cpp:332
+#, c-format
+msgid ""
+"<p>The following LaTeX backend has been requested to allow execution of "
+"external programs:</p><center><p><tt>%1$s</tt></p></center><p>The external "
+"programs can execute arbitrary commands on your system, including dangerous "
+"ones, if instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+
+#: src/Converter.cpp:339
+#, c-format
+msgid ""
+"<p>The requested operation requires the use of a converter from %2$s to %3$s:"
+"</p><blockquote><p><tt>%1$s</tt></p></blockquote><p>This external program "
+"can execute arbitrary commands on your system, including dangerous ones, if "
+"instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+
+#: src/Converter.cpp:349
+msgid "An external converter is disabled for security reasons"
+msgstr ""
+
+#: src/Converter.cpp:351
+msgid ""
+"<p><b>Your current preference settings forbid its execution.</b></p><p>(To "
+"change this setting, go to <i>Preferences ▹ File Handling ▹ "
+"Converters</i> and uncheck <i>Security ▹ Forbid needauth converters</"
+"i>.)"
+msgstr ""
+
+#: src/Converter.cpp:360
+msgid "A LaTeX backend requires your authorization"
+msgstr ""
+
+#: src/Converter.cpp:361
+msgid "An external converter requires your authorization"
+msgstr ""
+
+#: src/Converter.cpp:364
+msgid ""
+"<p>Should LaTeX backends be allowed to run external programs?</p><p><b>Allow "
+"them only if you trust the origin/sender of the LyX document!</b></p>"
+msgstr ""
+
+#: src/Converter.cpp:367
+msgid ""
+"<p>Would you like to run this converter?</p><p><b>Only run if you trust the "
+"origin/sender of the LyX document!</b></p>"
+msgstr ""
+
+#: src/Converter.cpp:371
+#, fuzzy
+msgid "Do ¬ allow"
+msgstr "不要載入"
+
+#: src/Converter.cpp:371
+#, fuzzy
+msgid "Do ¬ run"
+msgstr "不要載入"
+
+#: src/Converter.cpp:372
+#, fuzzy
+msgid "A&llow"
+msgstr "黃色"
+
+#: src/Converter.cpp:372
+msgid "&Run"
+msgstr ""
+
+#: src/Converter.cpp:374
+#, fuzzy
+msgid "&Always allow for this document"
+msgstr "關閉或隱藏文件"
+
+#: src/Converter.cpp:375
+#, fuzzy
+msgid "&Always run for this document"
+msgstr "關閉或隱藏文件"
+
+#: src/Converter.cpp:445 src/Converter.cpp:690 src/Converter.cpp:719
+#, fuzzy
+msgid "Converter killed"
+msgstr "轉換器檔案快取"
+
+#: src/Converter.cpp:446 src/Converter.cpp:691 src/Converter.cpp:720
+#, c-format
+msgid ""
+"The following converter was killed by the user.\n"
+" %1$s\n"
+msgstr ""
+
+#: src/Converter.cpp:465 src/Converter.cpp:748 src/Converter.cpp:771
+#: src/Converter.cpp:814
+msgid "Cannot convert file"
+msgstr "無法轉換檔案"
+
+#: src/Converter.cpp:466
+#, c-format
+msgid ""
+"No information for converting %1$s format files to %2$s.\n"
+"Define a converter in the preferences."
+msgstr ""
+"沒有關於轉換 %1$s 格式檔案到 %2$s 的資訊. \n"
+"請在偏好設定中定義一個轉換器."
+
+#: src/Converter.cpp:571 src/frontends/qt/GuiDocument.cpp:1959
+msgid "Pygments driver command not found!"
+msgstr ""
+
+#: src/Converter.cpp:572 src/frontends/qt/GuiDocument.cpp:1960
+msgid ""
+"The driver command necessary to use the minted package\n"
+"(pygmentize) has not been found. Make sure you have\n"
+"the python-pygments module installed or, if the driver\n"
+"is named differently, to add the following line to the\n"
+"document preamble:\n"
+"\n"
+"\\AtBeginDocument{\\renewcommand{\\MintedPygmentize}{driver}}\n"
+"\n"
+"where 'driver' is name of the driver command."
+msgstr ""
+
+#: src/Converter.cpp:666 src/Format.cpp:729 src/Format.cpp:800
+msgid "Executing command: "
+msgstr "執行命令: "
projects / lyx.git / blobdiff